Scribd
Upload
609 views7 pages

Anycubic Photon Mono - Resin Settings

This document provides resin settings for the Anycubic Photon Mono printer using different resin types from various manufacturers. It includes the normal exposure time, off time, bottom exposure time, and bottom layers for each resin tested. Comments and links to photos are also included to provide additional information about specific resin tests. The settings are intended as a starting point, as adjustments may be needed to obtain good print results. Users can submit their own setting data using the provided form links.

Uploaded by

jobube89
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
609 views7 pages

Anycubic Photon Mono - Resin Settings

This document provides resin settings for the Anycubic Photon Mono printer using different resin types from various manufacturers. It includes the normal exposure time, off time, bottom exposure time, and bottom layers for each resin tested. Comments and links to photos are also included to provide additional information about specific resin tests. The settings are intended as a starting point, as adjustments may be needed to obtain good print results. Users can submit their own setting data using the provided form links.

Uploaded by

jobube89
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 7

Anycubic Photon Mono - Best Resin Settings

Note - these settings are a good starting point, but changes might have to be made to get a good resu
This sheet was created on 9th january 2021 - So please bare with the lack of information. Use the for

DONT FORGET TO SHAKE YOUR RESIN BEFORE USE

Date added Brand Type Printer Layer


09-01-21 Anycubic Basic Grey Mono 0.050
09-01-21 Anycubic Basic Grey Mono 0.040
21-01-21 Anycubic Basic Grey Mono 0.030
10-01-21 Anycubic Basic Grey Mono 0.025

28-02-21 Anycubic Resinway Grey Mono 0.050

14-02-21 Anycubic Basic Black Mono 0.05


15-01-21 Anycubic Clear Mono 0.050
31-03-21 Elegoo Water Washable Green Mono 0.050
11-01-21 Monocure Rapid Grey Mono 0.050
12-01-21 Resione M70 Skin Mono 0.050
16-01-21 Resione M70 Skin Mono 0.050
10-01-21 Siraya Tech Simple - Smoky Black Mono 0.050
07-02-21 eSun Hard - Tough Resin Black Mono 0.050

07-02-21 Elegoo Water Washable Grey Mono 0.05


14-02-21 Elegoo Abs like Mono 0.05
14-02-21 Nova3D Grey, Water Washable Mono 0.050
15-02-21 Nova3D Black, Water Washable Mono 0.050
29-05-21 Phrozen Aqua Green Mono 0.030
29-05-21 3DMaterials Super Fast Grey Mono 0.050
29-05-21 Monocure Rapid Clear Mono 0.050
might have to be made to get a good result
with the lack of information. Use the form to submit your Mono SE: https://docs.google.com/spre

SIN BEFORE USE Support >>>> Form to report new settings: https://cutt.ly/KjxpsrH

Normal exposure time Off time Bottom exposure Bottom layers


2 0.2 30 6
2 0.2 45 6
1.6 0.5 35 6
1.6 0.5 32 6
2 0.5 35 6

2 0.5 20 3
2 0.2 45 6
2 0.5 30 6
1.6 1 30 6
3 1 40 4
3 0 50 3
1.75 1 30 4
2 0.5 45 6

2 0.5 20 6
1.8 1 35 10
2 0.5 40 6
2 0.5 30 4
1.2 1 20 6
0.6 0.2 5 6
1.4 0.5 30 6
o SE: https://docs.google.com/spreadsheets/d/1ccM1MJdRdw8fD4__mAFuMyORIyGwoQUsOhKQfTwkdPM/edit#gid=0

https://cutt.ly/KjxpsrH

Z-Lift Distance Z-Lift Speed Retract Speed Reported by ºC Room Temp


4 6 6 Kenneth B 20
4 6 6 Kenneth B 20
4 6 4 Kenneth B 22
4 6 4 Paul R 20
6 4 6 Kenneth B 22

4 6 6 Eve 20
4 6 6 Kenneth B 20
5 1.25 5 frozenbanana 22
6 1 3 Sean W McInnes 22
6 4 6 Hobbyist Life
6 4 6 Kenneth B 22
Chris Alvarez 21
6 4 6 Paul R 21

6 1 3 Lordkartoffel 24
6 2 6 Unknown 20
6 3 4 Unknown 21
6 6 6 Kyle R 22
6 4 6 Jeffrey 17
10 2 4 CyciumX 20
6 4 6 Sean W McInnes 19
RIyGwoQUsOhKQfTwkdPM/edit#gid=0 Photon Mono X Sheet: https://docs.google.com/spreadsheets/u/0/d/10j3YC4yR3Bg_mOHhygCQ5u8q5kX9V
Photon Sheet: https://docs.google.com/spreadsheets/d/1crvzMnt_8NJXAsABinoIhcOjE8l3h7s0L82Zlh1vkL8/

Link to photo Comments


https://imgur.com/a/KoGRbZN
https://imgur.com/a/Bxs91go

https://imgur.com/a/QvdAASy

https://imgur.com/a/vSJbAZm

https://imgur.com/gallery/x5tezWD
https://imgur.com/a/EVgKrVg
https://www.youtube.com/watch?v=sGIF0Xu60GU
PLEASE see video from Hobbyist Life here: https://www.youtube.com/watch?v=sGIF0Xu60GU
https://imgur.com/a/MXkIzSX
https://imgur.com/gallery/YexPP2p

https://imgur.com/a/J9vRzPS

https://images-na.ssl-images-amazon.com/images/I/712Xt0lvqgL._SL1600_.jpg
3YC4yR3Bg_mOHhygCQ5u8q5kX9VTIPheAkUda-aHE/htmlview#gid=0
AsABinoIhcOjE8l3h7s0L82Zlh1vkL8/edit#gid=0

atch?v=sGIF0Xu60GU

You might also like