0% found this document useful (0 votes)
146 views

m50 Vanos

This document provides pinout information for connecting an EMU (engine management unit) to a BMW M50 Bosch DME 3.3.1 engine control unit from 1993-1996 BMW models. It lists 28 pins on the stock ECU and their corresponding names and functions related to ignition coils, fuel injectors, sensors, and other engine components.

Uploaded by

Andrey buzya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
146 views

m50 Vanos

This document provides pinout information for connecting an EMU (engine management unit) to a BMW M50 Bosch DME 3.3.1 engine control unit from 1993-1996 BMW models. It lists 28 pins on the stock ECU and their corresponding names and functions related to ignition coils, fuel injectors, sensors, and other engine components.

Uploaded by

Andrey buzya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Name: BMW M50 Bosch DME 3.3.

1 (93-96)

EMU EMU DESCRIPTION Stock ECU Pin NAME DESCRIPTION WIRE


PIN SIZE
B17 EMU GROUND 28 ECU ground 0,75mm
G17 POWER GROUND 6 Power ground 0,75mm
G24 POWER GROUND 34 Power ground 0,75mm
B24 POWER GROUND 55 Power ground 0,75mm
G18 POWER +12V 56 Ignition switch 0,5mm
B18 SENSOR GROUND 43,44,71 Sensor ground Crank, iat tps clt knock shield 0,5mm
G8 IGNITION COIL 1 50 Coil 1 passive 0,75mm
G16 IGNITION COIL 2 51 Coil 2 passive 0,75mm
G9 IGNITION COIL 3 52 Coil 3 passive 0,75mm
B16 IGNITION COIL 4 23 Coil 4 passive 0,75mm
B8 IGNITION COIL 5 25 Coil 5 passive 0,75mm
G1 IGNITION COIL 6 24 Coil 6 passive 0,75mm
G7 INJECTOR 1 33 Injector 1 High-Z 0,75mm
G15 INJECTOR 2 32 Injector 2 High-Z 0,75mm
G23 INJECTOR 3 31 Injector 3 High-Z 0,75mm
G6 INJECTOR 4 5 Injector 4 High-Z 0,75mm
G14 INJECTOR 5 3 Injector 5 High-Z 0,5mm
G22 INJECTOR 6 4 Injector 6 High-Z 0,5mm
G21 AUX1 27 Main relay 0,5mm
G13 AUX2 2 Idle valve Flayback to 26 (battery voltage) 0,5mm
G5 AUX3 29 Idle valve Flayback to 26 (battery voltage) 0,5mm
G20 AUX4 47 Tacho 0,5mm
G12 AUX5 1 Fuel pump 0,5mm
G4 AUX6 7 VANOS valve Flayback to 26 (battery voltage) 0,5mm
G2 STEPPER MOTOR #1A 8 Check engine 0,5mm
G10 STEPPER MOTOR #1B 48 A/C relay 0,5mm
G3 STEPPER MOTOR #2A 0,5mm
G11 STEPPER MOTOR #2B 0,5mm
G19 WBO HEATER 38 Oxygen sensor relay 0,5mm
B5 WBO VS 13 Oxygen sensor signal 0,5mm
B22 EBO VS/IP 40 Oxygen sensor ground
B4 CLT 78 0,5mm
B21 IAT 77 0,5mm
B12 TPS IN 73 0,5mm
B2 KS #1 70 0,5mm
B10 KS #2 69 0,5mm
B23 +5V 59 0,5mm
B14 VSS IN 42 0,5mm
B7 PRIMARY TRIGGER 16 60-2 0,5mm
B15 CAMSYNC #1 17 1 tooth 0,5mm
B6 CAMSYNC #2 0,5mm
B20 ANALOG #1 65 A/C pressure switch Pullap ???? +5v/ pulldown 0,5mm
B3 ANALOG #2 64 A/C switch Pullap ???? +5v / pulldown 0,5mm
B11 ANALOG #3 0,5mm
B19 ANALOG #4 0,5mm

You might also like