Scribd
Upload
86 views

RoCide DB20

RoCide DB20 is a biocide used to sanitize membrane systems. It has instant antimicrobial activity and breaks down quickly, providing a cost-effective way to eliminate contamination. RoCide DB20 degrades rapidly and naturally, giving it outstanding environmental properties. It can be applied either on-line at 50ppm for 60 minutes or in a clean-in-place system by recirculating a 100ppm solution for a total of 30 minutes.

Uploaded by

eduardo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
86 views

RoCide DB20

RoCide DB20 is a biocide used to sanitize membrane systems. It has instant antimicrobial activity and breaks down quickly, providing a cost-effective way to eliminate contamination. RoCide DB20 degrades rapidly and naturally, giving it outstanding environmental properties. It can be applied either on-line at 50ppm for 60 minutes or in a clean-in-place system by recirculating a 100ppm solution for a total of 30 minutes.

Uploaded by

eduardo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RoCide DB20 is a non-oxidising biocide, produced specifically for the

RoCide DB20
sanitising of membrane systems. The formulation has almost
instantaneous antimicrobial activity combined with rapid chemical
breakdown, resulting in one of the most cost-effective methods of
contamination elimination. RoCide DB20 has outstanding
environmental properties as it degrades rapidly and naturally.

Instructions for Use:


Performance
There are two options for applying RoCide
RoCide DB20 offers a variety of performance DB20; either on line, or in a clean in place
benefits: system.
• Instantaneous antimicrobial activity as a non On line:
oxidising biocide.
Application on line should be made with a
• Compatible with thin film composite and 50ppm hours treatment. The
cellulose acetate membranes. recommended application time is 60
minutes, therefore the recommended dose
• Kills bacteria, fungi and algae. rate is 50ppm. Should a shorter application
time be required, reasonable results can be
• Degrades rapidly and naturally to comply achieved by applying 100ppm for 30
with strict environmental discharge minutes.
regulations.
Clean in Place:
• Can be used in conjunction with other
applicable cleaners as shown in the Avista Prepare a solution of 100ppm of RoCide
cleaner selection guide. DB20 and recirculate for a total of 30
minutes. After each 10 minute period,
replenish the solution with 25% of the
chemical originally used.

Packaging:

RoCide DB20 is available in 20kg pails


Avista Technologies (UK) Ltd and 200kg drums. Other packaging is
Waterside House available on request.
PO Box 28612
Edinburgh, EH14 5ZL Property
United Kingdom
Appearance : Amber liquid
Tel +44 (0)131 449 6677 Specific Gravity : 1.2 to 1.3
Fax +44 (0)131 449 5599 pH :2-5
Email [email protected] Freeze Point : -8oC (18oF)
Web www.avistatech.co.uk

PDS 20 - Rocide DB20


Revision 3 -08/2002

You might also like