Scribd
Upload
53 views

RoClean P703

RoClean P703 is a powdered cleaner designed to remove metal foulants such as iron, manganese, and aluminium deposits from thin film composite and cellulose acetate membranes. It is buffered to prevent exceeding the pH limits of membranes during cleaning. RoClean P703 offers superior removal of metals compared to generic citric and hydrochloric acid cleaners. It contains a proprietary blend of buffers, chelants, surfactants, and dispersants and is highly buffered to resist pH changes when used for cleaning.

Uploaded by

eduardo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views

RoClean P703

RoClean P703 is a powdered cleaner designed to remove metal foulants such as iron, manganese, and aluminium deposits from thin film composite and cellulose acetate membranes. It is buffered to prevent exceeding the pH limits of membranes during cleaning. RoClean P703 offers superior removal of metals compared to generic citric and hydrochloric acid cleaners. It contains a proprietary blend of buffers, chelants, surfactants, and dispersants and is highly buffered to resist pH changes when used for cleaning.

Uploaded by

eduardo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RoClean P703 is a powdered cleaner designed to remove metal

RoClean P703
foulants such as iron, manganese, and aluminium deposits from thin
film composite and cellulose acetate membranes. RoClean P703 is
buffered to prevent the pH limits of a membrane being exceeded in the
event of misapplication.

Performance Instructions for Use:

RoClean P703 offers a variety of performance For moderate to severe fouling, RoClean
benefits: P703 should be applied at a nominal
strength of 20%w/v. For milder fouling, or
where frequent cleaning is employed,
• Compatible with the major membrane
satisfactory results may be achieved at
suppliers.
10% w/v.
• Superior results in the removal of metals,
The cleaning solution should be
especially when compared to generic citric
recirculated at the flow rate recommended
and hydrochloric acid formulations.
by the membrane manufacturer, taking
care not to exceed the guidelines for
• Contains a specialised blend of proprietary pressure. Avista Technologies recommend
blend of buffers, chelants, surfactants, and the following flowrates for cleaning spiral
dispersants. wound elements:-
• Highly buffered to resist pH changes during Element Diameter Flowrate
the cleaning process.
4" (100mm) 40 lpm
8" (200mm) 150 lpm
• Can be used in conjunction with other
applicable cleaners as shown in the Avista
Temperature:
cleaner selection guide.
Where possible, apply the cleaning
solution at the maximum temperature
recommended by the membrane
manufacturer.

Packaging:
Avista Technologies (UK) Ltd
Waterside House RoClean P703 is available in 20 Kgs pails.
PO Box 28612 Other packaging is available on request.
Edinburgh, EH14 5ZL
United Kingdom Property Analysis

Appearance Pale Cream


Tel +44 (0)131 449 6677 Powder
Fax +44 (0)131 449 5599 pH at 20% solution 2.5 – 3.5
Email [email protected] Density 0.9 – 1.0 kg/
Web www.avistatech.co.uk litre

PDS36 - RoClean P703


Revision 1 – 09/2002

You might also like