Genial (Thailand) Co.

,Ltd
®
BARRA LASTIC Tel : 02-910 7330-1 Fax : 02-910 7331
www.genialthai.com

Flexible, polymer cement waterproofing slurry

DESCRIPTION TYPICAL PERFORMANCE DATA

BARRALASTIC is a two part, prepacked system, Pull off bond strength : 1.7N/mm2
consisting of a liquid polymer as Part A and a premixed
powder as Part B. The two parts on mixing yield a Water Penetration Test : <0.1mm
brushable, smooth slurry with excellent bond to most (0.5kg/cm2)
substrates. The product is based on selected synthetic Coefficient of Permeability : 2.27 x 10 -13 m/s
resins and cements. (0.3kgf/cm2)
QUV Accelerated Weathering : Gray Scale 4-5
BARRALASTIC is suitable in : Test (ASTM G53:93, type A)
Contact with Potable Water - WRC (UK)
(1000 hours) & (2000 hours)
Contact with Potable Water - SS245:81, Appendix H
Note:
Contact with Potable Water - Albury Lab. (UK)
Gray Scale 1 denotes severe discolouration and Gray Scale 5
denotes mild or no discolouration.
BARRALASTIC is in compliance with :
Bureau Ventas Potability test for used in drinking water
PROPERTIES
reservoirs or tanks.
Surface Spread of Flame test :- BS 476:Pt.7:71(Class 1) Part A Part B
Supply form : Liquid Powder
FIELDS OF APPLICATION Colour : White Grey
BARRALASTIC is designed to be used as an effective Working time
waterproofing membrane on a variety of substrates. @ 20 C : 1 hr (approx.)
Applications include :
@ 30 C : 0.5 hr (approx.)
waterproof coatings to the internal faces of water
Application temperature : >5 C
tanks, sumps, reservoirs, planter boxes etc., before
tiling or other surface finishing.
APPLICATION
treating terraces, balconies, kitchen & toilet floors
as a sandwich treatment, to prevent water ingress. Surface Preparation
treating bridge & flyover decks before wearing Correct substrate preparation is critical for optimum
course to protect concrete from rainwater ingress. performance.
Surfaces should be structurally sound, clean, and free
from loose particles, oil, grease, or any other
FEATURES AND BENEFITS contaminants.
Cement laitence, loose particles, mould release agents,
Polymer Improved bond strength on a variety
curing membranes, and other contaminants must be
modified of substrates.
removed by wet grit blasting, high pressure water jetting
Permeable to Allows surface to breath, preventing (approx. 150 bars) or such other effective methods.
water vapours build up of vapour pressure. Fill surface irregularities such as blow holes,
Flexible Can stand moderate movements of honeycombs etc., with an EMACO repair mortars to
hairline cracks. Crack bridging up to achieve a smooth and level surface.
0.3 mm crack width. Saturate the prepared substrate with clean water before
applying BARRALASTIC.
Resistant to Suitable for use in exposed
weathering conditions. Mixing
Brushable Easy to apply by brush or spray. Mechanical mixing is necessary. A slow speed (600
consistency rpm), heavy duty electric drill with a wing type paddle is
recommended. Place approx. 75% of Part A of the pack
Non toxic Can be applied on surfaces in in a clean pail. Keeping the mixer running, add the Part
contact with drinking water. B slowly. Mix for at least 3 minutes to get a lump-free
homogenous mix. While continuing to mix, add all of the
remainder of Part A if applying on a horizontal surface,
or a part of it if applying on vertical surfaces till the
required consistency is obtained.

BASF Construction Chemicals offices in ASEAN

Singapore Malaysia Indonesia Thailand Vietnam Philippines

Tel :+65-6861-6766 Tel :+60-3-3344-3388 Tel :+62-21-893-4339 Tel :+66-2910-7730 Tel :+84-650-743-100 Tel : +63-2-632-9995
Fax :+65-6861-3186 Fax :+60-3-3344-2288 Fax : +62-21-893-4342 Fax :+66-3845-3029 Fax :+84-650-743-200 Fax : +63-2-632-9996
BARRA® LASTIC
Placing
It is extremely important that the area being treated is PACKAGING
shaded from direct sun rays and wind to prevent rapid
drying of the coating. BARRALASTIC is available in 36 kg packs containing
26 kg of Part B in a multi-ply paper sack with polythene
CURING liner, and 10 kg of Part A in a plastic container.
For large jobs, bulk packing of Parts A and B are also
Slow drying of BARRALASTIC membrane ensures available.
homogenous curing and high waterproofing
characteristics. SHELF LIFE
BARRALASTIC must be protected against rapid drying
BARRALASTIC can be kept for 12 months from date of
due to high temperatures or wind. Curing by wet burlap,
manufacture if stored in tightly sealed original
polyethylene sheet or a curing compound such as
packaging, in dry and cool enclosed area.
MASTERKURE 181 is recommended.
Note : Worm - gear type of sprayers do not normally PRECAUTIONS
have a mixing arrangement. Therefore, material has to
be mixed separately and fed to the spraying machine. For detailed Health, Safety and Environmental
Recommendations, please consult and follow all
CLEANING instructions on the product Material Safety Data Sheet.

Clean tools and equipment with water, before the

waterproofing coating hardens.
1-1-1-1106
ESTIMATING DATA
The minimum recommended coverage of
BARRALASTIC is 1 to 1.5 kg/m2 to get 0.5 mm to 0.75
mm thick film build per coat. Actual coverage depends
upon the method of application, the texture and porosity
of the surface.
Therefore material requirement is approximately 2
kg/m2 for 1 mm thick coating.
Note : Avoid using part packs.
Use only mix of complete pack.

Distribute and Applicate by

Genial (Thailand ) Co.,Ltd

134 Soi. Krungthep-Non 42 , Krungthep-Non Rd. ,
Bangsue , Bangkok 10800
Tel : 02-910 7330-1 Fax : 02-910 7331
www.genialthai.com Email : [email protected]
The technical information and application advice given in this BASF Construction Chemicals publication are
STATEMENT OF based on the present state of our best scientific and practical knowledge. As the information herein is of a
general nature, no assumption can be made as to a product's suitability for a particular use or application and
RESPONSIBILITY no warranty as to its accuracy, reliability or completeness either expressed or implied is given other than
those required by law. The user is responsible for checking the suitability of products for their intended use.
NOTE Field service where provided does not constitute supervisory responsibility. Suggestions made by BASF
Construction Chemicals either orally or in writing may be followed, modified or rejected by the owner,
engineer or contractor since they, and not BASF Construction Chemicals, are responsible for carrying out
procedures appropriate to a specific application.