Scribd
Upload
19K views

Setedit V13 Overlock CPU

This document contains system settings and configuration parameters for optimizing performance on a device. It sets minimum and maximum frame rates for the CPU and GPU, enables performance optimizations, and configures default refresh rates and settings for devices with 3GB or more of RAM. Debugging and performance tuning features are also enabled in the settings.

Uploaded by

Bowjow Jowbow
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
19K views

Setedit V13 Overlock CPU

This document contains system settings and configuration parameters for optimizing performance on a device. It sets minimum and maximum frame rates for the CPU and GPU, enables performance optimizations, and configures default refresh rates and settings for devices with 3GB or more of RAM. Debugging and performance tuning features are also enabled in the settings.

Uploaded by

Bowjow Jowbow
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

#youtubecheriow

#system table

cpu.fps=60
gpu.fps=60
ro.fps_enable=1
ro.fps.capsmin=60
ro.fps.capsmax=144
ro.cpufreq.game=1
ro.sys.cpu.defaultfreq=auto
ro.sys.gpu.defaultfreq=auto

ro.cpu.nooc= false
ro.cpu.budget = false
ro.cpu.paidoverclocking = true
ro.cpu.class = FlagShip

Note : string dibawah ini khusus Ram 3 keatas


Note : The string below is specifically for Ram 3 and above

R.integer.config_defaultRefreshRate = 90
R.integer.config_defaultPeakRefreshRate =90
Settings.System.MIN_REFRESH_RATE = 0
Settings.System.PEAK_REFRESH_RATE = 0

video.accelerate.hw = 1 persist.sys.purgeable_assets = 1 persist.sys.NV_FPSLIMIT =


60 persist.sys.NV_POWERMODE = 1 persist.service.lgospd.enable = 0
persist.sys.NV_PROFVER = 15
touch.presure.scale = 0.001
persist.service.pcsync.enable = 0
debug.performance.tuning = 1 debug.gr.numframebuffers = 3

You might also like