Meridium API 510 External Checklist Inspection Report Template
Meridium API 510 External Checklist Inspection Report Template
Completion Date
Asset ID(ex. AM5-101B)
Equipment Serial Number
NBIC Number
Type of Inspection (VT3, etc.)
Inspection Task EXTERNAL VISUAL - NON-INSULATED ASSET, ULTRASONIC THICKNESS
TESTING, Choose an item., Choose an item., Choose an item., Choose an item., Choose an
item., Choose an item., Choose an item., Choose an item.
Inspection Summary:
Checklist Findings
Category Name Value Finding Summary
(Yes/No/NA)
*See Note 1
Connections Bolting
Flanges
Leak Clamps
Manways
Nozzles
Other
Reinforcing Pads
Small Branches
General Coating/Painting
Corrosion
Distortion
Electrical Ground
Exp Joint or Bellows
Gauge/Sight Glass
Guy Wires
Insulation
Ladder/Stairway
Note 1: Yes/No/NA shall be used/ interpreted as follows: “Yes” - component was inspected and a finding exists. The
inspector shall write a short description of the finding. More detail of the finding shall be provided in the inspection
summary. “No” - component was inspected no finding exists. Write nothing. “NA” - component does not exist or is not
applicable to equipment being inspected.
Recommendations
Headline
Description
Target Completion Date
Follow Up Inspection Required Choose an item.
Recommendation Priority Choose an item.
Work Reference Type Choose an item.
Work Request Required Choose an item.
Headline
Description
Target Completion Date
Follow Up Inspection Required Choose an item.
Recommendation Priority Choose an item.
Work Reference Type Choose an item.
Work Request Required Choose an item.
Headline
Description
Target Completion Date
Follow Up Inspection Required Choose an item.
Recommendation Priority Choose an item.
Work Reference Type Choose an item.
Work Request Required Choose an item.