CONTINO | AVANCE

Price- and Type list 2022

LEICHT Küchen AG
Postfach 60
73548 Waldstetten
Germany
Phone +49 I 7171 I 402-0
Fax +49 I 7171 I 402-300
www.leicht.com
Legend / Symbols and Extra Charges

Depth 36 cm and/or 48 cm available at no extra charge.

Add depth measurement 36 or 48 to type. Color-coding of Carcase lines:
Example: T 30 80 = depth 58 cm
T 30 80 36 = depth 36 cm CARCASE LINE 73
or T 30 80 48 = depth 48 cm
CARCASE LINE 80
Depth 68 cm available at extra charge.
Add depth measurement 68 to type. CARCASE LINE 86
Example: T 30 80 = depth 58 cm
T 30 80 68 = depth 68 cm extra charge 52 points

CONTINO-floor units in C1 style

C1 On the marked cupboards the lower grip handle is omitted. Planning tips
Please complete type with 1. Please follow the planning tips on the relevant pages.
Example 1: CT 60 80 Z2 = cupboard with two grip handles
C1T 60 80 Z2 = cupboard with one grip handle above extra charge 60 points
The pullout below with Tip-Softclose.

Example 2: CT 60 80 S2Z = cupboard with two grip handles Surface codes:

C1T 60 80 S2Z = cupboard with one grip handle above extra charge 117 points
The drawer (above pullout below) with Tip-Softclose.
The pullout below with Tip-Softclose. AL Aluminium

Further information see page 10.06, 10.11 and 13.02 - 13.07. FB Coloured concrete texture

Suspended floor units/tall units

FF Colour lacquered finely textured
The marked units are approved for wall mounting without plinth.
Further information see PRIMO chapter 2. FG Colour lacquered gloss

FS Colour lacquered super matt

The marked cupboards are available without extra charge also in the front line 86 cm.
H Wood veneer
Please mark these article types with J.
Example: H 60 210 = front line 73 cm
H 60 210 J = front line 86 cm no extra charge
HI Wood veneer with matching graining (Image)

K Laminate
The marked cupboards are available without extra charge also in the front line 66 cm.
Please mark these article types with Y instead of 8. KG Laminate gloss
Example: MGT 60 190 8 = front line 80 cm
MGT 60 190 Y = front line 66 cm no extra charge KH Laminate wood decor

Tall unit fronts, single front KI Laminate wood decor with matching graining (Image)
The marked cupboards are available also with single front at no extra cost.
On order, please add an E to this article type. KM Laminate matt
Example: H 60 204 HW = front line 80 cm
H 60 204 HWE = front one piece no extra charge L Worktop decor

Not available for: MC Metallic lacquer iridescent

701-705 ROCCA-C, 786 KERA-C | 486 KERA-A, 742 SOLID-C.
Horizontal decors from carcase height 203.9 cm not available: ME Metallic lacquer
719 ORLANDO-C | 419 ORLANDO-A, 722 SYNTHIA-C | 422 SYNTHIA-A.
Decors from carcase height 190.6 cm not available:
MF Metal coloured
726 IOS-C, 728 IOS-M-C, 783 VALAIS-C.
PF Colour lacquered grain texture
For the following programmes please add FRAUSR (see chapter 14):
744 BOSSA-C, 768 MADERO-C | 468 MADERO-A, 776 TERMA-C | 476 TERMA-A, PM Polymer matt glass coated
769 TOPOS-C | 469 TOPOS-A.
VM Coloured with special matt lacquer finish

VS Metal foil satin finish smooth

Your contact

LEICHT Küchen AG | Gmünder Straße 70 | 73550 Waldstetten

Germany | Phone +49 (0)7171-402-0 | Fax +49 (0)7171-402-300
www.leicht.com | [email protected]
Information

Validity / Quotation of prices The type list LEICHT 1/2022 supersedes and invalidates all Framed prices are HLP (dealer list prices). The correspond-
previous lists. The figures in the price groups are point scores ing goods are allotted to the product group 20.
and not prices. These points relate directly to a valid factor at For specials, please refer to Company for detailed quotation. In
the time. All items priced per metre, intermediate measure- the interest of continuing improvement, specifications may be
ments are rounded up to next 10 cm. altered from those shown errors and omissions.

Terms of business For processing of orders, only our general sales-, de- by light and heat influence, therefore, front samples cannot be
livery and payment-conditions on the reverse side, are seen as binding.
valid. Verbal agreements not confirmed by us in writing are
not valid. Accuracy of colour reproductions in this document
cannot be guaranteed. Surfaces will mellow with time, caused

Characteristics In compliance with DIN EN 14322, our melamine and laminate adjusted under standard and daylight conditions. When differ-
surfaces are pressed on both sides under high pressure onto ent materials with the same colour code are combined, colour
MDF or high-density multilayer chipboard and thus comply deviations cannot always be avoided. They are caused by the
with the legal requirements. The formaldehyde emissions of our metamerism of different light sources and by the differing light
panel materials comply with the E05 environmental standard refraction of the individual surface structures and are therefore
(EN 717-1) and are practically non-existent thanks to the all- no reason for complaint.
round edging of all components. In order to preserve the beauty and function of surfaces, please
We manufacture real wood fronts from select veneers using observe the instruction manual and the care instructions en-
the best practices of craftsmanship. Our wooden surfaces are closed with each delivery.
sealed with the solvent-free stain and PUR lacquer system to
protect them against dirt and moisture.
In several work steps, lacquered components are coated with
water-based PUR lacquers that were specially developed for sur-
faces subject to heavy wear. Our colours are coordinated and

Additions and Replacement Additionally supplied laminate, lacquer and wooden parts will
show a different colour shade to existing fronts. These initial dif-
ferences fade with time. Colour differences on additional parts
are therefore unavoidable and no reason for complaint.

Installation The installation must, for safety reasons, always be undertaken

by specialists, according to the valid installation directions. At-
tention is to be paid to the enclosed installation instructions.
Please read carefully and follow the enclosed instruction
manual from the manufacturer for appliances such as refrig-
erators, ovens, hobs, dishwashers and extractor hoods. It is
also essential to ensure that electrical and plumbing connec-
tions be undertaken by accredited tradesmen only.

Complaints Samples Natural wood will always show slight differences in texture and Due to natural wear and tear all materials can show changes
colour which can be traced back to the original material as a in the surface. These features are therefore no reason for com-
natural product. The authentic features, which are emphasized plaint. Samples are not binding for the exact colour and surface
by open-pore lacquering, will not be affected by staining. This texture.
gives each wooden kitchen special character and enhances the
natural beauty of the processed material.
Lacquer, wood, glass, concrete, stone and metal, as
well as laminate surfaces, are all subject to a natural age-
ing process resulting from light and environmental influences
(smoke, dirt, steam etc.). This may cause changes to the colour.
Regular cleaning and care is therefore recommended. For plas-
tic-coated parts as well as glass surfaces, differences in colour
and texture cannot be ruled out for production related reasons.

Care and Maintenance The enclosed instructions for care and maintenance are for use
by the end consumer.

1/2022 1
Information

RAL-Quality tag
Furniture and furnishing items with the RAL-Quality tag
and products with this Quality Certificate are top prod-
ucts of the German Furniture Industry and have been
additionally tested for healthy living.

Climate-neutral manufacturer Emission label

Climate-neutral furniture manufacturer according to
the guidelines for climate protection by the German
Guetegemeinschaft Moebel (furniture) e.v.(DGM)

Our furniture has been awarded the highest emission

class A, compliant with the award criteria for the Emission
label of the Deutsche Guetegemeinschaft Moebel e.V.
(German Quality Association Furniture)

Reddot design award

LEICHT Kitchen AG was awarded for outstanding de- 2004 Handle-less kitchen “AVANCE”
sign. The internationally renowned jury of the REDDOT
award gave this distinction for high design quality:

Design prize Germany The “Designpreis Deutschland” is awarded by the Coun- 2010 Angled door cupboard
cil for Design and promoted by the Ministry of Economy
and Technology. This is considered the highest German
accolade:

IF Product Design Award The IF Design Award is a consistent, reputable brand la- 2009 Angled door cupboard
bel, dealing with “distinguished” design. Quality and De- 2013 Q-Box
sign were able to convince the international jury many
times in the past.

2 1/2022
Information

ICONIC Award:
Innovative Interior / Innovative Architecture
The ICONIC Award is today considered to be one of the INNOVATIVE INTERIOR - winner
most prestigious design prizes in the furnishing industry. 2015 Interior+
It is awarded annually at the International Furniture Fair 2017 EVO
in Cologne. 2019 Vero
INNOVATIVE ARCHITECTURE - best of best
2018 Raum in Raum

Plus X Award

With an international and independent jury of 27 indus- 2015 Most Innovative Brand LEICHT
tries, 23 competent strategic partners and more than 2017 EVO
600 participating international brands, the Plus X Award 2017 Most Innovative Brand LEICHT
is today the world’s largest innovation prize for technol-
ogy, sport and lifestyle.

PEFC-certified

LEICHT Küchen AG is PEFC-certified. This confirms that requirements” of the PEFC (Programme for the Endorse-
the wood and wooden materials, used for our kitchen ment of Forest Certification Schemes).
furniture, come from farmed forests and controlled
sources. For this LEICHT Küchen AG maintains an inter-
nal control-system that conforms with the valid guide
lines “Product chain of custody for timber products –

Küchenmeile A30

Official member of Küchenmeile A30

Kitchens- Made in Germany

Integrated Data Model

The data of this type list can be accessed for computer

based kitchen planning in the IDM-data format.

TSCA Title VI

LEICHT Küchen AG complies with the guidelines for the regulations). This means that the wood-based materials used
regulation of formaldehyde emissions in accordance with meet the highest environmental and human requirements.
“TSCA Title VI” (contains the requirements of the CARB II

EAC Certificate

The EAC certificate is official proof, that the products comply

with the harmonised technical Rules (TR ZU) of the partici-
pating countries of the Eurasian Economic Union.

LEICHT Küchen AG Postfach 60 | 73548 Waldstetten

Germany
Phone +49 7171 402-0 | Fax +49 7171 402-300
© Copyright LEICHT Küchen AG 2021 www.leicht.com

1/2022 3
Information
General Terms and Conditions of Sale, Delivery and Payment

1. General provisions 7. Terms of payment

1) The following General Terms and Conditions of Sale, Delivery and Payment („GTC“), as amended from 1) Unless agreed upon otherwise, invoices shall be due and payable in full within 30 days of the invoice date.
time to time, shall apply exclusively to all goods and services supplied by LEICHT Küchen AG (hereinafter: 2) We reserve the right to bill the agreed performance by letter post or electronically by email. The purchaser
„LEICHT“ or „we“). must ensure that all electronic invoices can be properly delivered by email to the email address indicated
2) These GTC shall only apply if the purchaser is an entrepreneur (Sec. 14 BGB – German Civil Code), a legal by the purchaser.
person under public law or a special fund under public law. 3) In the case of contracts with purchasing associations, the written agreements made with these associa-
3) Unless agreed upon otherwise, these GTC shall also apply as a framework agreement, in the version tions shall apply.
applicable at the time the order is placed or last communicated to the purchaser, to all future contracts 4) We are not obliged to accept cheques and other promissory notes. Cheques will only be accepted on
with the same purchaser for the sale and/or delivery of movable things, without us having to refer to them account of performance after written agreement.
again in each individual case. 5) The payment is deemed to have been received on the date on which the amount is received by us or
4) Any conflicting terms and conditions – in particular the purchaser‘s terms and conditions of purchase credited to our bank account. If the purchaser is in default of payment, we are entitled to charge interest
– are hereby expressly excluded. This shall also apply in the event that we supply the goods or services for the duration of the default in the amount of 9 percentage points above the basic rate of interest as
without reservation despite being aware of the purchaser‘s conflicting terms and conditions. In any case, well as a lump sum of EUR 40. The right to assert further claims for compensation shall remain unaffected.
the purchaser approves the validity of our GTC once he accepts, in whole or in part, goods or services sup- 6) We do not charge interest on advance payments and instalments.
plied by us or pays the purchase price. We only accept any deviations from our GTC if we have expressly 7) If, after conclusion of the contract, we become aware of any circumstances suggesting the purchaser‘s
confirmed them in writing. Subject to an express regulation to the contrary, this confirmed deviation shall inability to pay, i.e. if reasonable doubts in the purchaser‘s solvency arise, jeopardising our claim to counter
only apply to the specific individual case. performance, we are entitled, regardless of any outstanding cheques, to refuse the performance, to the
5) Series-produced furniture is sold by model, which is why there is no entitlement to delivery of display extent not yet rendered. This is the case if an application for the opening of insolvency proceedings has been
items. Images in catalogues, etc. are non-binding. filed, for example. In this case, we are entitled to set a period within which the purchaser can, at his option,
either effect the payment or provide security reciprocally and simultaneously against the performance to
2. Offers and order confirmations be rendered by us. After expiry of the deadline, we are entitled to withdraw from the contract if neither an
1) All our offers are subject to confirmation. advance payment has been effected, nor a security provided. In the case of contracts for the manufacture
2) In the absence of a special agreement, a contract is deemed to have been concluded upon receipt of our of non-fungible goods (products manufactured to specification), we are entitled to withdraw from the
order confirmation sent to the purchaser in writing. Contracts made with representatives and staff members contract with immediate effect; this shall be without prejudice to the statutory regulations concerning the
are also deemed to be effective only upon receipt of our written order confirmation. The order confirmation dispensability of setting a period.
is authoritative for the scope of delivery. If we do not confirm the order, the contract is deemed to have been 8) Any deduction of discounts can only be accepted if the purchaser is not in default of any payments
concluded upon execution of the order at the latest. due to us.
3) There are no oral side agreements upon conclusion of the contract. Any express individual agreements
between the purchaser and us (including side agreements, amendments and additions) shall – provided that 8. Right of setoff and retention
they were made after conclusion of the contract – always take precedence over these GTC. The content of 1) We are entitled to retain any further deliveries until all previous deliveries have been paid for, to the extent
such individual agreements shall be governed, subject to evidence to the contrary provided by the purchaser, that the deliveries constitute an economic unit (connexity) due to the material and temporal connection of
by a written contract or – in the absence of such contract – our order confirmation sent to the purchaser our performance or multiple orders of similar types of goods.
pursuant to Sec. 2.2 of these GTC. 2) Retention of payments due to any claims of the purchaser against us that are based on another con-
4) In the event of call-off orders, we are entitled to procure the material for the entire order and manufacture tractual relationship with us shall be excluded. Apart from that, the purchaser is only entitled to exercise
the entire quantity ordered immediately. Consequently, any modifications requested by the purchaser can no rights of retention if his claims are uncontested or legally established. If the goods delivered are affected
longer be taken into account after placing the order, unless this has been expressly agreed. by a defect, however, the purchaser is entitled to retain a portion of the purchase price that is appropriate
5) Customary variations in model, design, colour and veneer may occur and shall not justify any complaints; in relation to the defect.
neither do modifications that serve technical improvements. This shall apply in particular to follow-up orders. 3) The purchaser may not set off his claims against our claims, unless his claims are uncontested or legally
established.
3. Description of services
Suggestions for installation, possible applications, material recommendations and other specifications con- 9. Force majeure
cerning the goods (e.g. in catalogues, product information, electronic media or on labels), including public Force majeure events and other circumstances, in particular industrial actions, unrest, acts of war or terror-
statements or advertising, always depend on the particular field of use and the application in which the ism, which entail unforeseeable consequences for the performance, shall release us from our performance
goods are intended to be used and, unless expressly agreed as such, do not constitute a general, binding obligations for the duration of the disturbance and to the extent of its effects, insofar as we are not respon-
quality agreement or guarantee of quality. Specifications concerning the properties and possible applications sible for these events, even if we are already in default. The same shall apply if the timely execution of orders
of our goods do not include any guarantees either, in particular those stipulated in Sec. 443, 444, 639 BGB, accepted is rendered impossible by force majeure events. Correspondingly, we assume no procurement
unless expressly designated as such in writing upon conclusion of the contract. risk. We are entitled to withdraw from the contract if we do not receive the goods despite having previ-
ously concluded a corresponding purchase contract with a supplier; this shall be without prejudice to our
4. Delivery and delivery period responsibility for wilful intent or negligence in accordance with Sec. 13. If these circumstances last longer
1) Even if a delivery date has been agreed with the purchaser, any indicated delivery periods are only than two months, we are also entitled to withdraw from the contract, without the purchaser being entitled
approximate and non-binding, unless the delivery date has been expressly agreed as binding, i.e. it has to claim compensation. We will inform the purchaser of the non-timely availability of the goods without
been stipulated in writing that the purchaser has no interest in the delivery once the agreed date has lapsed. delay and, in the event of withdrawal on our part, will refund the corresponding counter performance, to
2) A confirmed delivery date shall be subject to correct, complete and timely delivery by our upstream sup- the extent already rendered.
pliers, if we have concluded a congruent covering transaction, neither we nor our upstream suppliers are at
fault or we are not obliged to procure the goods in the individual case. 10. Default and impossibility
3) Delivery is made ex works, which is also the place of performance for the delivery and any cure. Upon 1) Default of delivery can only be claimed after issuing a warning notice. In the event of default in delivery
request and at the expense of the purchaser, the goods can be shipped to another place of destination (sales caused by slight negligence, the purchaser is entitled to claim compensation for each week of default in
contract involving carriage of goods). Unless agreed upon otherwise, we are entitled to determine the type delivery or part thereof in the amount of 0.5% of the net contract value of the individual order, but alto-
of shipment (in particular shipping company, shipping route, packaging). gether no more than 5% of the value of that part of the total delivery which cannot be used or cannot be
4) The delivery deadline is deemed to have been met if the goods have left our works or we have commu- used in time as per agreement as a result of the default. The amount of this compensation shall be reduced/
nicated the readiness for shipment to the purchaser by its expiry. The delivery deadline shall not commence increased if we provide evidence of lower or the purchaser of higher damage.
as long as the purchaser has not met his obligations, such as the supply of technical data and documents, 2) Notwithstanding the purchaser‘s right to withdraw from the contract due to defects (cf. Sec. 11 and 12
authorisations as well as advance payment or handover of a payment guarantee. of these GTC), the purchaser may only exercise his right of withdrawal due to impossibility of performance
5) We are entitled to make part deliveries to the extent reasonable for the purchaser. or default if we can be held responsible for breach of material obligations.
6) In the event of call-off orders and supply contracts without a binding delivery date, the purchaser is 3) Finally, the right of withdrawal shall be excluded if the purchaser is solely or predominantly responsible
obliged to state a binding acceptance date in writing six (6) weeks in advance. for the circumstances which would justify a withdrawal or if a circumstance beyond our control occurs while
the purchaser is in default of acceptance.
5. Shipping and passing of risk 4) In addition, the purchaser may only withdraw from the contract or claim compensation in lieu of perfor-
1) The risk of accidental destruction and accidental deterioration of the goods shall pass to the purchaser mance if he has previously set us a reasonable period of at least four (4) weeks in writing, expressly pointing
upon handover of the goods at the latest. In the event of sales contracts involving carriage of goods, out that he will withdraw from the contract and/or claim compensation or reimbursement of expenses if the
however, the risk of accidental destruction and accidental deterioration of the goods as well as the risk of deadline is not met. After expiry of the deadline, the purchaser is obliged to inform us, upon our request,
delay shall already pass to the purchaser upon handover of the goods to the forwarder, carrier or other whether he still insists on the delivery or claims compensation or reimbursement of expenses or withdraws
person entrusted with the shipment. Where acceptance has been agreed, this shall be authoritative for the from the contract. If the purchaser fails to do so within a period set by us, he is no longer entitled to reject
passing of risk. Apart from that, the statutory provisions of the law on contracts for work and services shall the delivery and exercise the above-mentioned rights.
apply to the agreed acceptance. The handover or acceptance is also deemed to have been effected if the 5) Setting a period pursuant to Sec. 10.4 of these GTC may be dispensed with if we seriously and definitely
purchaser is in default of acceptance. refuse the contractual performance or if there are special circumstances which, after weighing the interests
2) If the shipment is delayed due to a circumstance that is attributable to the purchaser, the risk shall pass of both parties, justify withdrawal with immediate effect.
to the purchaser once the readiness for shipment is communicated. The claim for compensation or reimbursement of expenses shall be governed by Sec. 13 of these GTC.
3) If the shipment is delayed at the purchaser‘s request, we are entitled, after setting a reasonable period
for acceptance of the delivery and its expiry without effect, to otherwise dispose of the goods and supply 11. Notice of defects in purchase contracts and contracts for work and services
the purchaser within a reasonably extended delivery period. 1) Any legal or material defects, the lack of any warranted quality or durability / stability of the goods as
4) The purchaser is obliged to examine the incoming goods for transport damage without delay and well as excess, short or incorrect deliveries (defects) shall – insofar as they are apparent – be notified by the
report any visible damage to the carrier upon delivery. The damage must be clearly stated and noted in the purchaser in writing without delay, no later than eight (8) days after arrival of the goods at the place of des-
accompanying documents. tination and before they are processed, delivered or resold, specifying the alleged individual defects. Where
5) Any loss / transport damage which is not apparent must be notified in writing within seven (7) days of expedient, the packaging shall be opened. Any complaints for apparent defects shall be excluded once the
delivery. goods have been processed or incorporated into another product. Any defects not detected as part of the
6) The cost of packaging material shall be borne by the purchaser. Only reusable pallets will be taken back. usual incoming inspection shall also be notified by the purchaser in writing without delay, no later than
eight (8) days after being detected. Notices of defects must be received by us within the warranty period.
6. Prices 2) The purchaser must meet his obligations to examine the goods and give notice of any defects in accord-
1) Unless agreed upon otherwise in writing, our prices are quoted in EURO ex works, exclusive of value- ance with Sec. 377, 381 HGB [German Commercial Code]. Any warranty claims against us based on defects
added tax at the statutory rate as well as packaging and transport costs. that are not notified or not notified in time shall be excluded.
2) In the event of part deliveries, each delivery can be billed separately. 3) Notwithstanding any notices of defects, the purchaser is obliged to accept, unload and properly store the goods.
4 1/2022
Information
General Terms and Conditions of Sale, Delivery and Payment

12. Claims based on defects allocation of individual claims to a current account as well as the establishment and acknowledgement of
1) Claims based on defects cannot be asserted in the event of minor deviations of the goods from the the account balance shall not affect the retention of title.
agreed quality, insignificant impairment of usability, improper storage – especially storage contrary to our 2) However, the purchaser is entitled, as long as he is not in default of any payments, to resell the goods
instructions – and if the defect is attributable to non-observance of flawless operating, maintenance and delivered under retention of title in the ordinary course of business. The purchaser hereby assigns to us all
installation instructions, inappropriate or improper use, incorrect or careless handling or assembly, natural his claims against third parties arising from the resale in the amount of the invoice value agreed between the
wear and tear or interventions into the goods undertaken by the purchaser or third parties. Improper purchaser and us, including all ancillary rights (prolonged retention of title). We hereby accept the assign-
attempts to remedy the defect by the purchaser or a third party entail loss of all claims based on defects ment. Any other assignments are not permitted. The purchaser remains entitled to collect these claims until
to the extent that these attempts have increased our effort to remedy the improperly treated defect or revocation and as long as he is not in default of any payments. If the purchaser defaults on any payments
have caused further defects or damage. The above-mentioned deviations shall not justify any claims during due to us, he must inform the debtors of the assignment. In this case, we are also entitled to disclose the
subsequent deliveries and follow-up orders. assignment to the respective debtors and exercise our right to collect the claims. Therefore, the purchaser
2) The deviations described in Sec. 2.5 of these GTC do not constitute defects. This shall apply in particular is obliged to provide us with all documents and disclose the names of his customers to enable us to collect
to deviations in wood structure, textiles, leather, as well as colour variations in woods, plastic boards and the claim ourselves.
plastic foils. Lacquered parts are subject to natural ageing. Therefore, any colour differences in subsequent 3) The purchaser is only entitled and authorised to resell the goods in the usual, ordinary course of business
deliveries attributable to such ageing shall not justify another complaint. and only on condition that the claims assigned to us under Sec. 15.2 above are actually transferred to us.
3) If a defect is present and has been notified within the period stipulated in Sec. 11 of these GTC, we will The purchaser is not entitled to otherwise dispose of the goods. Furthermore, the purchaser is not entitled
effect cure, at our option, by either remedying the defect (repair) or delivering substitute, if the purchaser to pledge the retained goods or transfer them to third parties as security. The purchaser must inform us in
provides evidence that the defect was already present upon passing of risk. The place of performance for writing without delay of any compulsory execution measures undertaken by third parties in respect of our
the cure shall be the place of delivery. This shall not apply if we choose to effect cure in the form of repair retained goods. He must provide us with all necessary information to enable us to file a third-party action
and the goods to be repaired cannot be transported to us. against enforcement; the resulting costs shall be borne by the purchaser.
4) In the event that the cure fails, i.e. if we have allowed a reasonable period of at least four (4) weeks set 4) The purchaser is entitled to process the goods in the ordinary course of business. The purchaser shall
for cure to expire without effect, have undertaken two attempts to repair the goods or one attempt to process the goods on our behalf, without us incurring any obligations thereby. If the goods are processed,
deliver substitute, and the defect could still not be remedied, if we refuse to carry out the necessary repair combined, mixed or blended with other goods not supplied by us, we shall acquire co-ownership of the new
or substitute delivery without justification or unreasonably delay it or the repair is unreasonable for the product in proportion of the invoice value of the goods to the other processed goods at the time of process-
purchaser for other reasons, if the requirements set forth in Sec. 281 (2) or 323 (2) BGB are met or if we ing, combination, mixing or blending. If the purchaser acquires sole ownership of the new product by law,
refuse to effect cure on account of unreasonableness (cf. Sec. 12.5 of these GTC), the purchaser is entitled he hereby grants us co-ownership of the new product in the above-described proportion and undertakes to
to make use of the legal remedies of withdrawal or reduction instead of repair or substitute delivery and store the product for us free of charge.
claim compensation or reimbursement of expenses, the latter within the limits of Sec. 13 of these GTC. In 5) If the purchaser acts contrary to the contract, in particular if he defaults on any payments or breaches
the event of minor defects, however, the purchaser may not exercise the right of withdrawal. his obligation to handle the goods with care, we are entitled, after issuing a warning notice and setting a
5) Apart from that, we are not obliged to repair the goods or deliver substitute if this would involve dis- period, to withdraw from the contract and take back the goods. In this case, the purchaser is obliged to
proportionately high costs. This also includes the obligation to deliver items for discontinued programmes. return the goods after we have declared withdrawal.
The availability and subsequent supply of accessories, technical equipment, cupboard constructions and 6) The purchaser shall inform us without delay, handing over the documents required to file an action
surfaces is generally subject to technical progress. Therefore product restrictions or discontinuations due against enforcement, of any compulsory execution measures undertaken by third parties in respect of the
to this, cannot be ruled out. We will do our best to inform you about these decisions in good time and to goods subject to retention of title or the claims assigned to us.
find alternative solutions. We are entitled to refuse to effect both types of cure if both the anticipated costs 7) If the purchaser is not resident in Germany, he shall undertake all actions required by law or otherwise that
of repair and those of substitute delivery exceed the purchase price of the contractual goods by 100%. are necessary to ensure that our retention of title, as provided for in these GTC, is effective in the country
6) Defects of part of the delivery shall not justify a rejection of the whole delivery, unless the purchaser to which the goods are delivered.
cannot be reasonably expected to accept the defect-free part of the delivery. 8) The purchaser is obliged to take out sufficient insurance for the retained goods at his own expense. We
7) In respect of goods that are not delivered as new as per agreement, the purchaser is not entitled to are entitled to request presentation of the corresponding insurance policy as well as corresponding receipts
claim cure, reduction and withdrawal. Any claims for compensation and reimbursement of expenses shall of premium payments at any time.
be governed by Sec. 13 of these GTC. As regards products that are supplied by third parties, our warranty 9) We undertake to release securities at our option upon request of the purchaser if the realisable value of
shall be limited to the assignment of our claims against the supplier of the third-party product. In the event the securities provided to us exceeds our claims by more than 20%.
that the purchaser is unable to enforce his warranty claims against the supplier of the third-party product,
we provide warranty within the limits of these GTC. 16. Samples, drawings, price lists
8) We are entitled to claim from the purchaser reimbursement of the costs resulting from an unjustified 1) We reserve all rights (including copyrights, the right to apply for industrial property rights as well as
request for remediation of defects (in particular inspection and transport costs), unless the lack of defects patents, utility models, topography rights, registered designs, trademarks) to all our documents, such as
was not recognisable to the purchaser. In the event of substitute delivery, the purchaser is obliged to return specifications, drawings, notes, instructions, technical notifications or technical data, both in paper and
the defective goods upon request. Any components replaced under the warranty shall become our property. electronic form. Any material handed over to the purchaser shall remain our property and shall be returned
free of charge upon request. The materials may not be made available to third parties without our prior
13. Compensation for damages express written consent.
1) Unless agreed upon otherwise in these provisions, all claims of the purchaser for compensation of any 2) All models are protected by law. Any imitations will be prosecuted. Any drawings, clichés, reproductions
damage whatsoever, including claims for reimbursement of expenses and claims for compensation of and/or other depictions of our models created by the purchaser or seller as well as the names „Leicht“,
indirect damage, such as lost profit, shall be excluded. This shall apply in particular to claims based on any „Alsa“, „Contempi“ and „Interstar“ may only be shown or otherwise used in newspapers, advertising bro-
breach of duties arising from the obligation and tort. The exclusion of liability shall also apply if we have chures, etc. with our express written approval. The same applies to our model designations and names. In
employed assistants or vicarious agents, as well as to our executive staff. the event of noncompliance, we are entitled to exercise a right of retention and reserve the right to assert
2) Notwithstanding Sec. 13.1 of these GTC, we shall only be liable, no matter on what legal grounds, includ- further claims.
ing if we have employed executive staff or assistants and vicarious agents, if:
(a) we can be blamed for gross negligence or wilful intent; 17. Use of text, image and video material and logo, trademarks
(b) we have fraudulently concealed a defect or have warranted the quality of the goods; In the download section of our website, we provide our purchasers with text, image and video material for
(c) we have culpably caused injury to life, limb or health as well as if advertising purposes. We grant the non-exclusive, non-transferrable right, revocable at any time, to use the
(d) we have breached so-called material obligations, i.e. logo, text, image and video material, in particular on labels, packaging material and in advertising. The right
i. in the event of a serious breach of obligations, jeopardising the achievement of the contractual purpose or of use is subject to the following restrictions:
ii. in the event of a breach of obligations the discharge of which is an essential prerequisite for the proper - The text, image and video material made available may be used exclusively if reference is made to LEICHT
performance of the contract and the discharge of which the purchaser may rely upon as a matter of Küchen AG (lettering or logo).
course („material obligations“). - The logo as well as the text, image and video material may only be used in the specified design and
3) In the event of Sec. 13.2 (d) of these GTC – breach of material obligations – our liability shall be limited form, i.e. excerpts, montages, variants edited using photographic technology or electronic means as well
in terms of amount to the foreseeable, typically occurring damage, however, only in the event of slight as reproductions are not permitted.
negligence. - No rights against us can be derived from the use of the logo after termination of the activity as a LEICHT
4) The exclusion of liability shall not apply in respect of claims under the Product Liability Act. The foregoing dealer. Any use of text, image or video material and/or the logo suggesting that the purchaser and we are
regulations do not involve a reversal of the burden of proof to the purchaser‘s disadvantage. affiliated companies is not permitted. Likewise, the use of the logo in connection with the name of a city or
town, a region, and/or address or any variants thereof is not permitted without our prior written consent.
14. Limitation period for claims based on defects - The use of the LEICHT trademark as a domain or part of a domain is not permitted without our prior
1) The limitation period pursuant to Sec. 438 (1) no. 3 BGB, Sec. 445 b (1) BGB or Sec. 634 a (1) no. 1 BGB written consent. This shall also apply to all digital media (email accounts, website accounts, social media
for all claims based on defects shall be twelve (12) months from handover of the goods or – where accept- accounts, such as Facebook, Pinterest, Instagram, Twitter, as well as other Internet platforms).
ance has been agreed – from acceptance of the goods, unless agreed upon otherwise on a case-by-case After revocation of the right of use, we grant a 9-month grace period. The right of termination for cause
basis. The suspension of expiry pursuant to Sec. 445 b (2) BGB shall end after three (3) years. pursuant to Sec. 314 BGB shall remain unaffected.
2) Notwithstanding this, the statutory limitation periods shall also apply within the scope of application of
Sec. 438 (1) no. 3 BGB, Sec. 445 b (1) and (2) BGB or Sec. 634 a (1) no. 1 BGB: 18. Final provisions
- to damage arising from injury to life, limb or health caused by a defect attributable to us; 1) The purchaser is only entitled to assign or transfer any claims after obtaining our prior consent.
- if the defect is based on an intentional or grossly negligent breach of obligations on our part; 2) These GTC and all legal relations between the purchaser and us shall be governed by the law of the
- in the event of fraudulent concealment of a defect; Federal Republic of Germany. The application of the United Nations Convention on Contracts for the
- in the event of guarantees (Sec. 444 and 639 BGB) and International Sale of Goods of 11/04/1980 shall be excluded.
- if the last contract in the supply chain pursuant to Sec. 445 a BGB is a contract for the sale of consumer 3) The place of performance for all mutual obligations, in particular for payments of the purchaser and for
goods (pursuant to Sec. 474 BGB). our deliveries, shall be the headquarters of our company in Waldstetten.
3) The claims under the Product Liability Act as well as the statutory regulations on suspension of expiry, 4) For any disputes directly or indirectly arising from the business relationship, including those resulting from
suspension and recommencement of the limitation period shall remain unaffected. bills of exchange, accepted bills or cheques offered as payment, our place of business in Schwäbisch Gmünd
shall be deemed agreed as the exclusive – also international – place of jurisdiction, insofar as the other party
15. Retention of title is a merchant, a legal person under public law or a special fund under public law. The plaintiff is also entitled
1) We retain the title to the goods delivered until the purchaser has settled all our present and future claims to bring legal action at the defendant‘s place of business.
arising from the respective supply contract with the purchaser (extended retention of title as account bal-
ance and/or current account retention). Where we have accepted cheques on account of performance in
the purchaser‘s interest, we retain the title to all goods delivered until full release from such liabilities. The

1/2022 5
Handle-less kitchen concepts

This sales brochure contains two different product families of handle-less kitchens.

Apart from the established AVANCE, one further version of different style and own design feature is available to
choice.

CONTINO has the popular profile grip handle concept of the AVANCE – but with a new arrangement. The upper
grip handle of the 80 cm high floor unit is immediately beneath the worktop.

These product families cannot be used in combination!

Key differences and hints for the handle-less kitchens at a glance:

Differentiating factors
AVANCE CONTINO

Grip handle position

Floor unit height 73 cm / 86 cm

C1

Grip handle position

Floor unit height 80 cm

AVANCE AVANCE

C1

Handle feature

Handle feature on the wall unit

6 1/2022
Handle-less kitchen concepts

AVANCE CONTINO

Tall units with recessed handle Horizontal recessed handle Horizontal recessed handle
(see chapter AVANCE tall units) (see chapter CONTINO tall units)

Vertical recessed handle Vertical recessed handle

See chapter „Tall units with vertical recessed handles“

Planning principle Visible sides and side panels Visible sides and side panels

Programme description Name PRIMO Collection + A Name PRIMO Collection + C

e.g. ORLANDO-A e.g. ORLANDO-C

Programme number 4xx 7xx

e.g. 419 ORLANDO-A e.g. 719 ORLANDO-C

Style
Drawer and Pullout
L3 / M3 L3 / M3 and M8

1/2022 7
Contents

Designation Page Designation Page

A Chamfer
Chamfered edge lateral 45°
72.05, 80.14, 81.03, 82.04, 83.03, 84.03, 85.04
14.05, 15.05
Accessory bag 72.01, 80.17
Change 1 plug for 2 USB ports 14.08, 15.08
Additional carousel shelf 22.04, 24.04, 26.04
Change of appliance position 34.12, 39.12
Additional hand held remote control 91.07
Cleaning materials basket 90.35
Additional plinth cover 70.01
Cleaning materials pullout 90.35
Additional wall fixing for blenders 26.22
Combo bottle insert for L-profile compartment 90.04
Adequate ventilation for refrigerator-tall housing units 14.06, 15.06
Combo bread box with lid 90.05
Adjustable plinth leg 70.02
Combo bread cutting board 90.05
Air-drying wall unit for plates 66.01, 67.01
Combo compartment divider behind L-profile compartment 90.04
Alteration drawer style 14.05, 15.05
Combo container box 90.05
Alteration of plinth height 70.01, 70.03
Combo cutlery tray linoleum 90.03
Alteration pullout style 14.05, 15.05
Combo cutlery tray linoleum for 6.3 cm frame 90.03
Alteration type for tall rear shelf wall 14.08, 15.08
Combo cutlery tray oak 90.03
Anti slip mat 90.31
Combo cutlery tray oak for 6.3 cm frame 90.03
Appliance door for large capacity appliance 32.06, 33.06, 37.05, 38.06
Combo cutting board 90.05
Appliance front for large capacity appliance (1 door and 1 pullout)
Combo drawer box basic set 90.02
32.06, 33.06, 37.05, 38.06
Combo drawer-set 1 90.07
Appliance front for large capacity appliance (1 door and 2 pullouts)
Combo drawer-set 2 90.07
32.06, 33.06, 37.05, 38.06
Combo drawer-set 3 90.07
Appliance plinth base 20.09, 22.09, 24.08, 26.08
Combo drawer-set 4 90.07
Combo foil dispenser 90.03
Combo hob drawer box basic set for 6.3 cm frame 90.02
Combo insert for spice mills 90.03
Combo insert with 3 glass jars 90.03
B Combo insert with 3 glass jars for 6.3 cm frame
Combo knife holder
90.03
90.03
Back wall brought forward 14.06, 15.06
Combo lid holder for L-profile compartment 90.04
Bar support 80.18
Combo L-profile compartment 90.04
Basic unit 34.02, 34.14, 39.02, 39.14, 44.02, 49.02, 54.02
Combo non-slip mat 90.04
Batten 71.06, 71.08, 71.10
Combo plate holder 90.05
Batten for support bracket SFU .. 80.20
Combo pullout basic set 90.04
Bench extension 71.21-23
Combo spice jars and utensil tray 90.03
BLANCO black overflow set 92.12
Combo spice mills 90.03
BLANCO chrome pop-up knob 92.12
Combo storage jar set 90.05
BLANCO pop-up knob stainless steel satin finish 92.12
Combo tray 90.05
BLANCO press button stainless steel appearance 92.12
Combo U-divider 90.03
BLANCO round knob stainless steel appearance 92.12
Combo U-divider for 6.3 cm frame 90.03
Blender factory drilled 20.06-07, 22.06-07, 24.06, 26.05-06
Combo U-divider for L-profile compartment 90.04
Blender for under-table wine cooler cupboard 22.10
Combo utensil box 90.03
Blender instead of drawer 14.04, 15.04, 20.06, 22.06, 24.06
Combo utensil box for 6.3 cm frame 90.03
Blenders between units 20.21, 22.21, 24.19, 26.21
Compact material side panel W1KP.. 81.04
Bottle cupboard 20.03, 22.03, 24.03, 26.02
Compact material worktop 81.02
Bottle insert 90.12
Compartment division vertical 14.06, 15.06
Bottom shelf 71.04
Connecting piece 90.10, 90.14
Bracket for appliance 34.07, 39.08, 44.06-07, 49.04-05, 54.04-05
Connecting piece with 5 porcelain jars 90.10
Bread bin 90.12, 90.15
Connecting set 10.12, 10.18
Bread cupboard 20.02, 22.02, 24.02, 26.02
Connection to dishwasher 20.18-19, 22.18-19, 24.16-17, 26.19
Built-in refuse container 90.35
Container 90.12
Built-in refuse container plastic 90.35
Container change 20.12, 22.12, 24.11, 26.10
Built-in sink ceramic 92.26-27
Container change BLANCOSELECT 20.12, 22.12, 24.11, 26.10
Built-in sink Fragranit 92.20-22
Cookware-Centre 31.08, 32.10, 33.10, 36.08, 37.09, 38.10
Built-in sinks stainless steel 92.03-11, 92.15-19, 92.28
Corner connection 71.11, 80.16
Built-under oven housing unit 20.05, 22.05, 24.05, 26.05
Corner connection 135° 80.16
Built-under oven/microwave housing unit 20.05, 22.05, 24.05, 26.05
Corner connection 90° 80.15, 81.03, 82.03, 83.03, 84.03, 85.04
Built-under sink installation incl. cut-out 80.15, 81.02
Corner connection mitred 84.04
Butt connection 71.06, 71.08, 71.10
Corner connection, angled 81.03, 84.04
Corner floor unit 20.03-04, 22.03-04, 24.04, 26.03
Corner sink unit 20.14, 22.14, 24.13, 26.13
Corner tall unit 31.07, 32.09, 33.09, 36.07, 37.08, 38.09
Corner wall unit 60.03, 61.01-02, 62.01-02, 63.01-02, 66.01-02, 67.01-02, 68.01-02
C Cover for electric cable below an island unit 91.05
Carcase not glued 14.03, 15.03 Covering panel visible 81.03
Carcase-connection strip 20.23, 22.23, 24.20, 26.22, 30.05, 31.10, 32.12, 33.12, Cross beam 71.06, 71.08, 71.10
34.21, 35.05, 36.12, 37.13, 38.14, 39.20, 40.06, 41.07, Cupboard depth alteration 14.01, 15.01
42.08, 43.07, 44.14, 45.06, 46.07, 47.09, 48.09, 49.12, Cupboard height alteration 14.01, 15.01
50.07, 51.08, 52.11, 53.11, 54.12, 65.05, 66.07, 67.07, 68.09 Cupboard height and depth alteration 14.01, 15.01
Care product for natural stone 82.04 Cupboard width alteration 14.01, 15.01
CARESSI round excentre knob 92.29 Cupboard width and depth alteration 14.01, 15.01
Carousel floor unit 20.04, 22.04, 24.04, 26.04 Cupboard width and height alteration 14.01, 15.01
Casing for control units and cable 91.05 Cupboard width, height and depth alteration 14.01, 15.01
Catch for inner drawers and inner pullouts 90.28 Cupboard with drawer above, prepared for hob 20.06, 22.06, 24.05, 26.06
Ceiling blender flush with front 70.06 Cupboard without shelves and without shelf drill holes 14.03, 15.03
Ceiling blender flush with side 70.06 Cutlery tray 90.09, 90.14, 90.25-26

8 1/2022
Contents

Designation Page Designation Page

Cutlery tray with 3 foil storage compartments

Cutlery tray with knife holder
90.10
90.10
E
Eccentric connection 71.12
Cutlery tray with spice tray 90.26
Edge finish 81.03, 82.04-05, 83.03, 84.04, 85.04-05
Cutlery tray-dividers 90.25
Edge material 71.19
Cutout 71.11, 72.05, 80.14-16, 81.02-03, 82.03-04, 83.02-04, 84.03-04, 85.03-04
Electric drive mechanism for lift-up doors 10.12, 10.18
Cut-out floor unit side 20.06, 22.06, 24.06, 26.06
Electric drive mechanism for wall units with fold-up doors 10.12, 10.18
Cutout for appliance ventilation 70.03
Electric drive mechanism for wall units with swing flap doors 10.12, 10.18
Cutout for dispenser 32.06, 33.06, 37.05, 38.06
Electric drive mechanism for wall units with top hinged door 10.12, 10.18
Cutout for surface flush installation of hobs 81.02, 83.02
Electric slicer 90.36
Cutout for surface flush installation of sinks and hobs 85.03
Electro board 14.08, 15.08
Cutout for surface flush installation of stainless steel sinks 81.02, 83.02, 85.03
End tall unit 35.04, 36.09, 37.10, 38.11, 50.04, 51.05, 52.08, 53.08
Cutout for wine cooler 34.10, 39.11
End tall unit with glass insert 36.10, 37.11, 38.12
Cutout rounded 80.14, 81.03, 83.02
Exchange type 1.6 cm front panel for inner drawers 90.29
Cutout with resin frame for hobs 80.15
Exchange type 1.6 cm front panel for inner pullouts 90.29
Cutout with resin frame for sinks 80.15
Exchange wide angle hinge 14.02, 15.02
Cutout with sink installation 83.02
Extension cable 24 volt system 91.04, 91.09
Cutout with synthetic resin frame for surface flush sinks 80.15
Extension of power input 31.06, 32.08, 33.08, 36.06, 37.07, 38.08
Cutting board 90.36
External angle 71.11
External radii 71.11, 72.05, 80.14, 81.03, 83.03-04, 84.03
Extra charge for blender width less than 6.5 cm 20.21, 22.21, 24.19, 26.21
Extra charge for height increase 70.03, 70.06
Extra charge for tall units up to width 76 cm 14.07, 15.07, 34.14, 39.14
D Extra charge Le Corbusier - Colours
Extra charge per 5 cm add height
1.01
70.05
Depth adjustment part 90.11, 90.18-19
Extra charge RAL / NCS 1.04, 71.20, 72.04
Depth connection 80.16, 81.03
Extra charge per 5 cm extra width
Depth extensions 68.2 cm 20.15, 22.15, 24.14, 26.14, 40.04, 41.05, 42.05, 43.05,
20.22-23, 22.22-23, 24.19-20, 26.21-22, 30.05, 31.09-10,
45.04, 46.05, 47.06-07, 48.06-07, 50.05, 51.06, 52.08, 53.09
32.12, 33.12, 34.20, 35.05, 36.11, 37.12, 38.13, 39.19,
Depth increase of wall units 14.09, 15.09
40.06, 41.06-07, 42.08, 43.07, 44.13, 45.06, 46.07, 47.09,
Diagonal corner sink unit 135° 20.14, 22.14, 26.13
48.09, 49.11, 50.06, 51.08, 52.11, 53.11, 54.11
Diagonal corner unit 135° 20.04, 22.05, 26.04
Diagonal corner wall unit 135° 61.02, 62.02, 63.02, 66.02, 67.02, 68.02
Dishwasher support 40.03, 41.04, 42.05, 43.04, 45.03, 46.04,
47.06, 48.06, 50.04, 51.05, 52.07, 53.08
Dishwasher-front 40.03, 41.04, 42.05, 43.04, 45.03, 46.04,
47.06, 48.06, 50.04, 51.05, 52.07, 53.08
Dishwasher-Top cupboard 40.03, 41.04, 42.05, 43.04, 45.03, 46.04,
47.06, 48.06, 50.04, 51.05, 52.07, 53.08
F
Flap wall unit 60.01-02, 65.01
Distributor 24 volt system 91.04, 91.09
Floor shelf unit 20.15, 22.15, 24.14, 26.14
Divided blender 30.05, 31.10, 32.12, 33.12, 34.21, 35.05, 36.12, 37.13,
Floor shelf unit, thick 2.8 cm 20.15, 22.15, 24.14, 26.14
38.14, 39.20, 40.06, 41.07, 42.08, 43.07, 44.13, 45.06,
Floor support 15.09
46.07, 47.09, 48.09, 49.11, 50.06, 51.07, 52.10, 53.10, 54.11
Floor unit 20.01, 20.16, 22.01, 22.16, 24.01, 26.01, 26.16
Divided corner blender 50.06, 51.08, 52.11, 53.11, 54.11
Floor unit blender 20.21, 20.24, 22.21, 22.24, 24.19, 24.21, 26.21, 26.23
Divided niche door 41.03, 42.03, 43.03, 46.03, 47.04, 48.04
Floor unit blender with division 20.21, 22.21, 24.19
DOMO-board 72.06
Floor unit carcase side extra deep 14.04, 15.04
DOMO-fresh herbs tray 72.07
Floor unit corner blender 20.22, 22.22, 24.20, 26.22
DOMO-hook bar 72.06
Floor unit corner blender 90° 20.22, 22.22, 24.19, 26.21
DOMO-household paper holder 72.06
Floor unit corner blender 90° with division 20.22, 22.22, 24.19-20
DOMO-knife holder 72.06
Floor unit corner blender with division 20.23, 22.23, 24.20
DOMO-knife holder with knife-set 72.06
Floor unit end panel 20.17-18, 22.17-18, 24.15-16, 26.18
DOMO-railing 72.06
Floor unit panel 20.19, 22.19, 24.16-17
DOMO-railing with LED-lighting 72.06
Floor unit prepared for table ventilator 20.07, 22.07-08, 24.07, 26.07
DOMO-receptacle 72.06
Floor unit prepared for under-floor extractor 20.07, 22.07, 24.07, 26.06
DOMO-spice jar holder 72.07
Floor unit with sliding doors 20.03, 22.03, 24.03
DOMO-tablet PC holder 72.07
Floor unit-base stabilisation 14.04, 15.04
Door joint connection at the rear 20.18, 20.21, 22.18, 22.21, 24.16, 24.18, 26.19-20
Floor unit-base stabilisation loose 90.36
Door with C1 - division 14.04
Floor unit-island side panel 20.19, 22.19, 24.16-17
Door with hinge base plates 14.03, 15.03
Foil element 90.09
Drawer pan instead of pullout pan 14.02, 15.02
Foldable tap 92.23-24
Drawer unit blender 26.21
Folding step ladder 70.02
Drill hole 0.5 to 1.2 cm diameter 72.05
Folding steps, loose 90.36
Drill hole 0.5 to 5 cm diameter 81.03, 82.04, 85.03
Framed front for large capacity appliance 32.06, 33.06, 37.05, 38.06
Drill hole 1.3 to 5 cm diameter 83.03-04
Front alignment fitting 14.08, 15.08, 34.12, 39.12
Drill hole 10.2 cm diameter 80.16, 81.03, 82.04, 83.03, 84.04, 85.03
Front ceiling blender 70.05
Drill hole for built-in lights 71.11, 91.03
Front combination 1.06, 1.08
Drill holes for DOMO-railing 72.05, 85.05
Front division 73.02
Drill holes for tablet PC holder 72.06
Front division with recessed handle 14.01, 15.01
Drip tray 92.25
Front extension 14.02, 15.02
Drop-in tray 90.35
Front height alteration 14.01, 15.01
Front line aligned 34.13, 39.13
Front overhang above 14.06, 14.09, 15.06, 15.09
Front overhang at the side 14.02, 15.02
Front panel material 71.14
Front part height 119.0 cm 63.10
1/2022 9
Contents

Designation Page Designation Page

Front part height 120.7 cm 68.10 Interior+ spice jar swing-out frame 60.02, 61.06, 62.05, 63.05-06, 65.01,
Front part height 13.0 cm 20.25, 22.25, 26.25 66.05, 67.05, 68.04, 68.06
Front part height 26.25 cm 20.25, 22.25, 26.25 Interior+ swing-out frame 35.03, 36.09, 37.10, 38.11, 61.06, 62.05,
Front part height 33.0 cm 26.25 63.04-05, 66.05, 67.05, 68.04
Front part height 39.5 cm 60.08
Front part height 39.75 cm 20.25
Front part height 46.25 cm 22.25
Front part height 52.75 cm 60.08
Front part height 54.45 cm 65.06
Front part height 62.75 cm 26.25 K
Front part height 66.0 cm 61.10 Knife holder 90.09
Front part height 67.7 cm 66.08 Knife holder insert 90.15
Front part height 69.5 cm 20.25
Front part height 76.0 cm 22.25
Front part height 79.25 cm 62.09
Front part height 80.95 cm 67.08
Front part height 82.75 cm 24.22
Front part height 92.5 cm 63.10 L
Front part height 94.2 cm 68.10 L-Box bowl 90.18-19
Front width alteration 14.01, 15.01 L-Box bowl for small items 90.18-19
Front width and height alteration 14.01, 15.01 L-Box container 90.18-19
L-Box cutlery tray 90.18-19
L-Box drawer-set 1 90.21, 90.23
L-Box drawer-set 2 90.21, 90.23
L-Box drawer-set 3 90.21, 90.23
L-Box drawer-set 4 90.21, 90.23
G L-Box foil dispenser 90.18-19
Glass door wall unit 61.07, 62.06 L-Box knife holder 90.18-19
Glass niche panel 72.04, 83.03 L-Box spice tray 90.18-19
Glass shelf 90.34 LED 4000K power supply set, 24 volt system 91.04
Glass side panel W1GL.. 83.04 LED dynamic light control basic set Bluetooth 24 volt system 91.04
Glass side panel WGL.. 71.20 LED dynamic light control basic set flush switch 91.04
Glass side panel WGS.. 71.20 LED dynamic light control basic set radio 24 volt system 91.04
Glass worktop 83.02 LED dynamic light control extension set 24 volt system 91.04
LED-cupboard interior illumination 91.08
LED-extension cable 91.06
LED-handle profile 91.03
LED-lamp 91.02-03
LED-lamps vertical for shelf units 91.02
H LED-light 91.06
Hanging fixing for wall cladding 73.01 LED-light set 91.06-07
Hob unit 20.05, 22.06, 24.05, 26.05-06 LED-Linear-interior lighting 31.06, 31.08, 32.08, 32.10, 33.08, 33.10, 35.04, 36.06,
Holder for control units and cable 91.05 36.08-10, 37.07, 37.09-11, 38.08, 38.10-12, 50.04, 51.05, 52.08, 53.08
Hot water towel unit 20.12, 22.13, 24.12, 26.11 LED-power supply 91.06, 91.09
Housing unit 30.02-03, 31.03-04, 32.03-05, 33.04-05, 35.01-03, 36.03-04, LED-power supply 24 volt system 91.09
37.03-04, 38.03-05, 40.02, 41.03-04, 42.03-04, 43.03-04, 45.02, LED-pullout interior light 91.09
46.03-04, 47.04-05, 48.05, 50.02-03, 51.04, 52.04-07, 53.04-07 LED-pullout interior light USA 91.09
LED-switch dimmable 91.06
Length connection 20.24, 22.24, 24.21, 26.23, 71.03-05, 71.07,
71.09, 71.11, 72.01, 82.04, 83.03, 85.04
Linear glass cupboard light 91.01
Linear lights vertical for shelf units 91.02
I Linear niche light 91.01
Inner curve 72.05, 83.04 Linear shelf light 91.01-02
Inner drawer with 1.6 cm front 90.29 Longitudinal plinth connection 70.02
Inner drawer with metal front 90.27 Loose length divider 90.27
Inner pullout exchange 26.05 Lower wall unit shelf to wall increased 14.09, 15.09
Inner pullout with 1.6 cm front 90.30
Inner pullout with metal front 90.28
Insert for spice jars 90.10
Insert with 10 porcelain jars 90.10
Integral ventilation for housing units 14.06, 15.06
Interior+ base tall unit 35.03, 36.09, 37.10, 38.11 M
Interior+ base wall unit 61.06, 62.05, 63.04-05, 66.05, 67.05, 68.04 Maintenance set 84.04
Interior+ container 35.03, 36.09, 37.10, 38.11, 61.06, 62.05, Metal covering profile 72.01
63.05, 66.05, 67.05, 68.04, 90.34 Mini central switch 91.07
Interior+ glass jar set 35.03, 36.09, 37.10, 38.11, 61.06, 62.05, Mirror 31.03, 32.03, 33.03, 36.02, 37.02, 38.02
63.05, 66.05, 67.05, 68.04, 90.34 Mitre end panel 45° 20.20, 22.20, 24.17-18, 26.19-20
Interior+ glass railing insert 60.02, 61.06, 62.06, 63.05-06, Mitre end panel for isles 45° 20.20, 22.20, 24.17-18, 26.20
65.01, 66.06, 67.05, 68.05-06 Mitre for connection to DBS 70.06
Interior+ railing 35.03, 36.09, 37.10, 38.11, 61.06, 62.05, Mitre for connection to VBS 70.03
63.05, 66.05, 67.05, 68.04, 90.34 Mitre profile for plinth connection 70.02
Interior+ shelf 35.03, 36.09, 37.10, 38.11, 61.06, 62.05, Module Above 111 34.18, 39.17
63.05, 66.05, 67.05, 68.04, 90.34 Module Above 125 34.18, 39.17

10 1/2022
Contents

Designation Page Designation Page

Module Above 138

Module Above 151
34.18, 39.17
34.18, 39.17
O
Opening support for sink pullout cupboards 20.12, 22.12, 24.11, 26.10
Module Above 27 34.13, 34.17, 39.13, 39.16, 44.09-10, 49.07-08, 54.08
Original edge style FG 14.01, 15.01
Module Above 33 54.07
Original front 20.08, 22.08-09, 24.08, 26.08
Module Above 36 44.09, 49.07, 54.07
Original front with drawer- and pullout partitioning 20.08-09, 22.08-09, 24.08, 26.07-08
Module Above 40 34.13, 34.17, 39.13, 39.16, 44.09-10, 49.07-08, 54.08
Original front with drawer partitioning 26.07-08
Module Above 50 44.09, 49.07, 54.07
Original front with pullout partitioning 20.08-09, 22.08-09, 24.08
Module Above 53 34.13, 34.17, 39.13, 39.16, 44.09-10, 49.07-08, 54.08
Module Above 54 54.07
Module Above 63 44.10, 49.07, 54.07
Module Above 66 34.13, 34.17, 39.13, 39.16, 44.10, 49.07-08, 54.08
Module Above 68 54.08
Module Above 72
Module Above 80
34.17, 39.16
34.13, 34.17, 39.13, 39.16, 44.10-11, 49.07-08, 54.08
P
Package drinks crates storage 31.02, 32.02, 33.03, 36.02, 37.02, 38.02, 41.02,
Module Above 81 54.08
42.03, 43.03, 46.03, 47.04, 48.04, 51.03, 52.04, 53.04
Module Above 85 34.17, 39.16
Package vertical shelf 31.02, 32.02, 33.03, 36.02, 37.02, 38.02, 41.02,
Module Above 93 34.13, 34.18, 39.13, 39.16, 44.10-11, 49.07-08, 54.08
42.02, 43.02, 46.03, 47.03, 48.03, 51.03, 52.03, 53.03
Module Above 98 34.18, 39.16
Package waste depot 31.02, 32.02, 33.03, 36.02, 37.02, 38.02, 41.02,
Module Appliance double niche (open) 34.08, 39.09, 44.07, 49.04-05, 54.04-05
42.02, 43.02, 46.03, 47.03, 48.03, 51.03, 52.03, 53.03
Module Appliance niche (open) 34.07, 39.08, 44.06-07, 49.04-05, 54.04-05
Pharmacy floor unit 20.02, 22.02, 24.02
Module Appliance niche with door 34.09-11, 39.10-11, 44.08-09, 49.06, 54.06
Pharmacy tall unit 31.01, 32.01, 33.01, 36.01, 37.01, 38.01, 41.02,
Module Appliance niche with lift-up door 34.08, 39.09
42.02, 43.02, 46.02, 47.03, 48.03, 51.02, 52.03, 53.03
Module Below 100 34.06, 49.02, 54.03
Plate holder 90.15
Module Below 106 39.07
Plate insert 90.12, 90.15
Module Below 113 34.06
Plinth cover 70.01
Module Below 13 39.02
Plinth cover diagonal 70.01
Module Below 27 39.02, 44.04-05
Plinth cover flush front 70.03
Module Below 33 34.02, 54.03
Plinth cover flush with side 70.03
Module Below 40 39.02, 44.04-05, 54.02
Plinth cover profile 70.02
Module Below 46 49.03
Plinth cover side 70.01
Module Below 47 34.02, 44.02-03
Plinth cover waterproof 70.01
Module Below 50 54.02
Plinth cover waterproof, diagonal 70.01
Module Below 53 39.03, 49.02
Plinth cover waterproof, side 70.01
Module Below 57 44.02-03
Plinth flush with carcase 70.04
Module Below 60 34.03
Plinth flush with carcase, lateral 70.04
Module Below 63 49.02, 54.03
Plinth flush with carcase, waterproof 70.04
Module Below 66 39.04
Plinth flush with carcase, waterproof, lateral 70.04
Module Below 70 44.04, 54.02
Plinth platform 70.02
Module Below 73 34.03-04, 34.15
Porcelain ceramic niche panel 85.05
Module Below 76 49.03
Porcelain ceramic side panel W1PK.. 85.06
Module Below 77 44.02
Porcelain ceramic side panel W1PK.. one side visible 85.06
Module Below 80 39.05, 39.15, 54.02-03
Porcelain ceramic wall contour blender 85.03
Module Below 83 44.05, 49.02
Porcelain ceramic worktop 85.02
Module Below 86 34.04-05, 34.16-17, 44.04
Preparation surface 92.25
Module Below 90 44.03
Pullout or drawer style alteration 14.02, 15.02
Module Below 93 39.06
Pullout tray 14.08, 15.08, 31.06, 32.08, 33.08, 36.06, 37.07, 38.08
Module Below 99 44.05
Pullout unit 20.01-02, 20.16, 22.01-02, 22.16, 24.01-02, 26.01, 26.15-16
Module Below Appliance niche with door 44.06, 49.03, 54.04
Pullout with drawer pan and inner blender 14.02
Module housing 91.07
Pullout with drawer pan and inner drawer above 14.02, 15.02
Pullout-partition 90.27

N
Natural stone niche panel
Natural stone side panel W3GR.. one side visible
82.05
82.06
R
Radio central switch 91.07
Natural stone side panel W4GR.. one side visible 82.06
Rear panel in front finish 20.24-25, 22.24-25, 24.22, 26.23-24, 30.06, 31.11,
Natural stone wall contour blender 82.04
32.13, 33.13, 35.06, 36.12, 37.14, 38.15, 40.07, 41.08, 42.09,
Natural stone worktop 82.03
43.08, 45.07, 46.08, 47.10, 48.10, 50.08, 51.09, 52.12, 53.12
Niche door 20.03, 22.03, 24.03, 26.02, 30.01, 31.08, 32.10, 33.10,
Rear panel type of visible side 20.24, 22.24, 24.21, 26.23
35.01, 36.08, 37.09, 38.10, 40.01, 41.03, 42.03, 43.03,
Rear wall style changed 14.10, 15.10
45.01, 46.03, 47.04, 48.04, 50.01, 51.03, 52.04, 53.04
Recess for side panel 71.03-05, 71.07, 71.09
Niche panel 72.01
Recessed handle C-profile 3.01-02
Niche panel for sockets programme VALAIS 72.02
Recessed handle cut-out 20.06, 22.06, 24.05
Niche panel in front finish 72.02
Recessed handle E-profile 3.01-02
Niche panel programme BOSSA 72.02
Recessed handle illumination 91.11
Niche panel programme VALAIS 72.02
Recessed handle L-profile 3.01-02
Niche profile above 72.01
Recessed plinth alteration 14.04, 15.04
Niche profile below 72.01
Recessed plinth alteration both sides 14.04, 15.04
Recirculating set 60.04, 61.04, 62.04, 63.04, 63.07, 65.02, 66.03, 67.04, 68.03, 68.07
Removable rear panel 14.03, 15.02
Retractable socket element 91.10
Retractable socket element with USB 91.10
1/2022 11
Contents

Designation Page Designation Page

Retrofit set remote control pop-up InFino 92.12 Storage glass insert 90.12
Roll mat 92.25 Storage unit 20.02-03, 22.02-03, 24.02-03, 26.02, 30.01, 31.01-02, 32.01-02,
Rotating socket element 91.10 33.01-02, 35.01, 36.01, 37.01, 38.01, 40.01, 41.01-02, 42.01-02,
43.01-02, 45.01, 46.01-02, 47.01, 47.03, 48.01, 48.03, 50.01,
51.01-02, 52.01, 52.03, 53.01, 53.03
Storage-Centre 31.08, 32.10, 33.10, 36.08, 37.09, 38.10
Support bracket U-shape 80.20
Support hinge for fridge and freezers with appliance hinge
S 34.12, 39.12, 44.08, 49.06, 54.07
SensoMatic 10.12 Support leg 80.19
SensoMatic-KT 10.12, 10.18 Support leg height adjustment 80.19
Sensor switch 91.07 Support panel with plinth 20.23, 22.23, 24.21, 26.22, 40.07, 41.07, 42.09,
Set of porcelain jars 90.10 43.08, 45.07, 46.08, 47.10, 48.10, 50.07, 51.09, 52.12, 53.12
Shelf 90.33-34 Support panel with plinth for blender 20.23, 22.23, 24.21, 26.22, 40.07, 41.07,
Shelf above the clothes rail 31.02, 32.02, 33.03, 36.02, 37.02, 38.02 42.09, 43.08, 45.07, 46.08, 47.10, 48.10, 50.07, 51.09, 52.12, 53.12
Shelf B1.. 71.03 Suspension fixing 71.11
Shelf B1KP.. 81.04 Swing flap door wall unit 60.05, 61.04, 65.03, 66.04
Shelf B2.. 71.04 Swing flap door wall unit for extractor 61.03
Shelf B3.. 71.06 Synchronous control for pullout or drawer 14.04, 15.04
Shelf B3F.. with support 71.06
Shelf B4.. 71.08
Shelf B4F.. with support 71.08
Shelf B6.. 71.10
Shelf B6F.. with support 71.10
Shelf closed on top 14.05, 15.05 T
Shelf depth alteration 14.10, 15.10 Table extension 71.21-23
Shelf height alteration 14.10, 15.10 Table top B3T.. 71.06
Shelf height and depth alteration 14.10, 15.10 Table top B4T.. 71.08
Shelf support 71.12 Table top B6T.. 71.10
Side ceiling blender 70.05 Tablet PC holder 91.10
Side edge finish 84.04 Tall shelf unit 40.04, 41.05, 42.05, 43.05, 45.04, 46.05, 47.06, 48.06
Side edge processing 85.03 Tall shelf unit, thick 2.8 cm 40.04, 45.04, 46.05, 47.07, 48.07,
Side panel bench 71.21-23 50.05, 51.06, 52.08, 53.09
Side panel dock-on table 71.21-23 Tall shoe unit 31.03, 32.03, 33.03, 36.02, 37.02, 38.02
Side panel extension 20.18, 20.21, 22.18, 22.21, 24.16, 24.18, 26.19-20 Tall storage unit 30.01, 31.01, 32.01, 33.01, 35.01, 36.01, 37.01,
Side panel extension for dock-on table 71.21-23 38.01, 40.01, 41.01, 42.01, 43.01, 45.01, 46.01-02,
Side panel extension for table 71.21-23 47.01-02, 48.01-02, 50.01, 51.01-02, 52.01-02, 53.01-02
Side panel floor connecting profile 71.03-05, 71.07, 71.09 Tall unit blender 30.05-06, 31.09-10, 32.11, 32.13, 33.11, 33.13, 34.20-21,
Side panel floor fixing 71.05, 71.07, 71.09, 84.04 35.05-06, 36.11-12, 37.12-13, 38.13-14, 39.19-20, 40.06-07,
Side panel height adjustment 71.05, 71.07, 71.09, 84.04 41.06, 41.08, 42.08-09, 43.07-08, 44.13-14, 45.06-07, 46.07-08,
Side panel in front finish 71.13 47.09-10, 48.09-10, 49.11-12, 50.06-07, 51.07, 51.09, 52.10, 52.12, 53.10,
Side panel material, finished both sides 71.19 Tall unit carcase side extra deep 14.06, 15.06
Side panel material, finished one side 71.19 Tall unit corner blender 30.05, 31.10, 32.12, 33.12, 34.20, 35.05, 36.11, 37.12,
Side panel table 71.21-23 38.13, 39.19, 40.06, 41.07, 42.08, 43.07, 44.13, 45.06,
Side panel W1.. 71.03 46.07, 47.09, 48.09, 49.11, 50.06, 51.08, 52.11, 53.11, 54.11
Side panel W2.. 71.04 Tall unit corner blender 90° 30.05, 31.09, 32.12, 33.12, 34.20, 35.05, 36.11, 37.12,
Side panel W3.. 71.05 38.13, 39.19, 40.06, 41.06, 42.08, 43.07, 44.13, 45.06,
Side panel W4.. 71.07 46.07, 47.09, 48.09, 49.11, 50.06, 51.08, 52.11, 53.11, 54.11
Side panel W6.. 71.09 Tall unit end panel 40.05, 41.06, 42.07, 43.06, 45.05, 46.06,
Single bowl artificial stone 92.29 47.08, 48.08, 50.06, 51.07, 52.10, 53.10
Single bowl ceramic 92.26-27 Tall unit extension 14.07, 15.07
Single bowl Fragranit 92.20-21 Tall unit panel 40.05, 41.06, 42.07, 43.06, 45.05, 46.06, 47.08, 48.08
Single bowl Silgranit 92.12-13 Tall unit top cupboard 34.19, 39.18, 44.11, 49.09, 54.09
Single bowl stainless steel 92.03-06, 92.08-11, 92.15-18, 92.28 Tall utility unit 31.02, 32.02, 33.03, 36.02, 37.02, 38.02, 41.02,
Sink base unit alteration 14.05, 15.04 42.02, 43.02, 46.02, 47.03, 48.03, 51.02, 52.03, 53.03
Sink pullout unit 20.10, 20.16, 22.10-11, 22.16, 24.09-10, 26.09, 26.15-16 Tall wardrobe unit 31.02, 32.02, 33.03, 36.02, 37.02, 38.02
Sink pullout unit for hot water taps 20.12, 22.13, 24.12, 26.11 Tap 92.14, 92.23-25
Sink Silgranit 92.13 Tap hole waterproof 80.16
Sink unit 20.09, 22.10, 24.09, 26.08 Telescopic towel rails 90.35
Sink unit with back wall 20.11, 20.16, 22.12, 22.16, 24.11, 26.10 Texture direction rear wall changed 14.10, 15.10
Sink waste bin unit 20.10-11, 22.10-12, 24.09-11, 26.09-10 The other side is visible 84.02-03
Sink waste bin unit for hot water taps 20.13, 22.13, 24.12, 26.11-12 Tongue and groove connection 71.12
Slat appearance plinth blender 70.03 Top hinge moved to the bottom 14.05, 15.05
Slide-away door housing unit 31.05, 32.07, 33.07, 36.05, 37.06, 38.07 Touch-free central switch 91.07
Slide-away door washing machine housing unit 31.05, 32.07, 33.07, 36.05, 37.06, 38.07 Towel rail for CONTINO 90.36
Socket cutout 72.05, 82.05, 83.04, 85.05 Towel unit 20.02, 22.02, 24.02, 26.02
Socket insert 31.06, 31.08, 32.08, 32.10, 33.08, 33.10,
36.06, 36.08, 37.07, 37.09, 38.08, 38.10
Solid wood side panel 84.05-06
Solid wood wall contour blender 84.04
Solid wood worktop 84.02-03
Special corner connection 135° 80.16
Spice jar insert 90.15
Spice rack 4 rows 90.35

12 1/2022
Contents

Designation Page Designation Page

U Wide angle hinges

Wire basket
90.28
90.35
Under worktop drawer 20.15, 22.15, 26.15
Wool felt cover 90.31
Underside counter balanced 80.16
Worktop 80.11-13
Unit prepared for rear panel 14.03, 15.03
Worktop edge 80.14
Use of a steel cross bar 14.05, 15.05

V
Vario insert 90.15
Vario insert base 90.11
Vario insert for pots 90.12
Vario insert for stock 90.11
Ventilation gap below the worktop 26.06
Ventilator grille 70.02-03, 70.06
Visible carcase side 20.17, 22.17, 24.14, 26.17, 30.04, 31.09, 32.11,
33.11, 35.04, 36.10, 37.11, 38.12, 40.05, 41.05,
42.06, 43.05, 44.12, 45.05, 46.05, 47.07, 48.07,
49.10, 50.05, 51.06, 52.09, 53.09, 54.10, 60.06,
61.08, 62.07, 63.08, 65.04, 66.06, 67.06, 68.08
Visible carcase side for additional planning 20.17, 22.17, 24.15, 26.17, 30.04, 31.09,
32.11, 33.11, 35.04, 36.10, 37.11, 38.12, 40.05,
41.05, 42.06, 43.05, 44.12, 45.05, 46.05, 47.07,
48.07, 49.10, 50.05, 51.06, 52.09, 53.09, 54.10,
60.06, 61.08, 62.07, 63.08, 65.04, 66.06, 67.06, 68.08
Visible carcase side with depth increase 20.17, 22.17, 24.15, 26.17, 30.04, 31.09,
32.11, 33.11, 35.04, 36.11, 37.12, 38.13, 40.05,
41.05, 42.06, 43.05, 44.12, 45.05, 46.06, 47.07,
48.07, 49.10, 50.05, 51.06, 52.09, 53.09, 54.10
Visible edge 71.14, 71.19
VZ-premium equipment 30.01, 31.02, 32.02, 33.02, 35.01, 36.01, 37.01,
38.01, 40.01, 41.02, 42.02, 43.02, 45.01, 46.02,
47.03, 48.03, 50.01, 51.02, 52.03, 53.03

W
Wall cladding 73.01
Wall cladding BOSSA programme 73.01
Wall cladding in front finish 73.01
Wall cladding outer corner BOSSA programme 73.02
Wall contour blender 80.17
Wall contour blender in aluminium 80.17
Wall fixing rail 14.09, 15.09
Wall panel with LED-lighting 72.03
Wall shelf unit 60.01, 60.06, 61.07, 62.06, 63.05, 63.08
Wall shelf unit above and below in shelf interior design 14.10, 15.10
Wall shelf unit, thick 2.8 cm 60.02, 60.06, 61.07, 62.07, 63.06, 63.08,
65.04, 66.06, 67.06, 68.05, 68.07
Wall unit 60.01-02, 61.01, 62.01, 63.01, 63.06, 65.01, 66.01, 67.01, 68.01, 68.06
Wall unit altered up to 61 cm carcase depth 14.09, 15.09
Wall unit blender 44.13, 49.11, 60.07-08, 61.08-09, 62.08-09, 63.09-10,
65.05-06, 66.07-08, 67.07-08, 68.08-09
Wall unit corner blender 60.07-08, 61.09, 62.08, 63.09-10, 65.05, 66.07, 67.07, 68.09
Wall unit corner blender 90° 60.07, 61.09, 62.08, 63.09, 65.05, 66.07, 67.07, 68.09
Wall unit end panel 60.07, 61.08, 62.07, 63.09, 65.04, 66.06, 67.06, 68.08
Wall unit for extractor 60.01, 60.03-04, 61.02-03, 62.02-03, 63.02-03, 63.07,
65.01-02, 66.02-03, 67.02-03, 68.02-03, 68.06-07
Wall unit microwave housing 60.02, 61.01, 62.01, 63.01, 63.06, 65.01,
66.01, 67.01, 68.01, 68.06
Wall unit with extractor 60.04, 61.04, 62.04, 63.04, 63.07, 65.02,
66.03, 67.04, 68.03, 68.07
Wall unit with extractor altered up to 60.5 cm carcase depth 14.09, 15.09
Wall unit with fold-up doors 61.05, 62.04, 66.04, 67.04
Wall unit with fold-up doors and extractor 67.04
Wall unit with fold-up doors for extractor 62.03, 67.03
Wall unit with sliding doors 60.05, 61.05, 62.05, 63.04, 65.03, 66.05, 67.04, 68.04
Washing machine housing unit 31.05, 32.05, 33.05, 36.04, 37.04, 38.05
Waste bin floor unit 20.14, 22.14, 24.13, 26.13-14
Well for power supply 71.11
1/2022 13
Contents

Designation Page Designation Page

14 1/2022
CONTINO | AVANCE

Programme
description
Programme description

1.

Programmes CONTINO | AVANCE 1. chapter

Overview programmes and front colours / Discontinued list

Overview lacquer colours 01-04

Front combinations 05-08

ALURO-C 45

BONDI-C | BONDI-A 16-17

BOSSA-C 40-41

CERES-C | CERES-A 09-10

CLASSIC-FF-C | CLASSIC-FF-A 21
CLASSIC-FS-C | CLASSIC-FS-A 27
CONCRETE-C | CONCRETE-A 42

F 45-C | F 45-A 22-23

IKONO-C | IKONO-A 13
IOS-C 36-37
IOS-M-C 34-35

KERA-C | KERA-A 47-51

LAIKA-C | LAIKA-A 38
LARGO-FG-C | LARGO-FG-A 28-29

MADERO-C | MADERO-A 31
MARMO-C | MARMO-A 18
MINERA-C | MINERA-A 19

ORLANDO-C | ORLANDO-A 15

PEARL-C | PEARL-A 26

ROCCA-C 52-55

SELVA-C | SELVA-A 20
SIRIUS-C | SIRIUS-A 11-12
SOLID-C 30
STEEL-C | STEEL-A 43
STONE-C | STONE-A 44
SYNTHIA-C | SYNTHIA-A 14

TERMA-C | TERMA-A 39
TOCCO-C | TOCCO-A 24-25
TOPOS-C | TOPOS-A 32-33

VALAIS-C 46

1/2022 1.
 Programme description
Programme
description

1.

The Index numbers listed in the price group content have been calculated on the basis of an L-shaped kitchen. The calculation does not contain sink, appliances
and surround accessories. They serve solely as a nonbinding price guide.

Price group CONTINO Index

715 SIRIUS-C | 719 ORLANDO-C | 721 IKONO-C
C1 722 SYNTHIA-C | 733 CERES-C 75

718 SELVA-C | 720 MARMO-C | 739 BONDI-C

C2 741 MINERA-C 78

C3 712 CLASSIC-FF-C | 753 F 45-C | 754 TOCCO-C

83

C4 713 CLASSIC-FS-C | 740 PEARL-C

93

C5 742 SOLID-C | 768 MADERO-C | 769 TOPOS-C | 788 LARGO-FG-C

100

C6 710 LAIKA-C | 726 IOS-M-C | 728 IOS-C | 776 TERMA-C

107

C7 744 BOSSA-C | 791 STEEL-C | 793 CONCRETE-C | 794 STONE-C

116

C8 783 VALAIS-C | 784 ALURO-C

126

Price group AVANCE Index

415 SIRIUS-A | 419 ORLANDO-A | 421 IKONO-A
A1 422 SYNTHIA-A | 433 CERES-A 76

A2 418 SELVA-A | 420 MARMO-A | 439 BONDI-A | 441 MINERA-A

81

A3 412 CLASSIC-FF-A | 453 F 45-A | 454 TOCCO-A

85

A4 413 CLASSIC-FS-A | 440 PEARL-A

90

A5 468 MADERO-A | 469 TOPOS-A | 488 LARGO-FG-A

100

A6 410 LAIKA-A | 476 TERMA-A

110

A7 491 STEEL-A | 493 CONCRETE-A | 494 STONE-A

116

1. 1/2022
Overview programmes and front colours

C1 | A1 C2 | A2 C3 | A3 C4 | A4 C5 | A5 C6 | A6 C7 | A7 C8 Price groups CONTINO | AVANCE

733 | 433 CERES -C | -A 720 | 420 MARMO -C | -A 712 | 412 CLASSIC-FF -C | -A 713 | 413 CLASSIC-FS -C | -A 788 | 488 LARGO-FG -C | -A 726 IOS-M-C 744 BOSSA -C 783 VALAIS-C 7XX CONTINO | 4XX AVANCE

K 032 VI 210v FF 032 FS 032 FG 032 GM ... HI 350v H 335h

K 100 VI 211v FF 100 FS 100 FG 100 728 IOS-C HI 352v Color names:
032 magnolia 294 anthracite
K 103 FF 103 FS 103 FG 103 GL ... 784 ALURO-C
070 citrine 297 corten
K 120 739 | 439 BONDI -C | -A FF 120 FS 120 FG 106 ... 032 793 | 493 CONCRETE -C | -A AL 167v
071 opal 298 ferro
K 130 VM 100 FF 130 FS 130 FG 120 ... 100 FB 188 AL 168v 093 copper shadow 309 bergamo elm
K 134 VM 103 FF 134 FS 134 FG 130 ... 103 FB 189 AL 169v 094 merino 310 ash madeira

K 136 VM 120 FF 136 FS 136 FG 134 ... 120 FB 191 100 brilliant white 312 walnut
103 frosty white 313 textured oak copper
K 138 VM 130 FF 137 FS 137 FG 136 ... 130 FB 192
106 chrome brushed 316 textured oak marsh
K 273 VM 134 FF 138 FS 138 FG 137 ... 134 120 cobalt brushed 335 alpine natural oak
K 282 VM 138 FF 139 FS 139 FG 138 ... 136 791 | 491 STEEL -C | -A C8 + 50% 130 mohair 345 mountain robinia
VM 284 FF 273 FS 273 FG 270 ... 137 MF 297 786 KERA-C 134 olive grey 350 alpine oak lined
136 sand grey 352 walnut lined
715 | 415 SIRIUS -C | -A VM 286 FF 277 FS 279 FG 273 ... 138 MF 298 CI 540
137 fossil grey 360 maraval chestnut
BG 032 FF 279 FS 282 FG 277 ... 139 CI 541
138 lava 368 tennessee walnut
BG 100 741 | 441 MINERA -C | -A FF 282 FS 284 FG 279 ... 273 794 | 494 STONE -C | -A CI 542 139 cotta 540 pamir
BG 103 VM 152v FF 284 RAL / NCS FS 285 RAL / NCS FG 282 ... 277 FB 148 CI 544 148 fossena 541 marès

BG 120 FF 285 FS 286 FG 284 RAL / NCS ... 279 FB 149 CI 545
149 camata 542 cordillera
152 kiruna 544 nasca
BG 130 718 | 418 SELVA -C | -A FF RAL FS RAL FG 286 ... 282
167 oxid silver 545 iguazu
BG 134 KI 242v FG RAL ... 284 RAL / NCS A7 + 60% C8 + 60% 168 oxid bronze 683 taj mahal sanded
BG 138 753 | 453 F 45 -C | -A 740 | 440 PEARL -C | -A ... 286 486 KERA-A 701 ROCCA-01-C 169 oxid titan 684 white fantasy sanded
188 dakar 685 nero san marcos satined
BG 273 KM 100 PM 070 742 SOLID -C ... RAL CI 540 GI 685
189 manhattan 686 steel gray satined
BG 284 KM 103 PM 071 K 120v GL 292 CI 541
191 le havre 687 nero assoluto waterjet
KM 120 KM 284v GL 293 CI 542 C8 + 70% 192 brasilia 689 negresco satined
721 | 421 IKONO -C | -A KM 130 GL 294 CI 544 702 ROCCA-02-C 201 keraton 690 breccia imperiale satined
K 201v KM 134 768 | 468 MADERO -C | -A CI 545 GI 686 202 liton 691 black musk waterjet
205 neroton RAL RAL-colours
K 202v KM 137 HI 262v 776 | 476 TERMA -C | -A
210 marmobianco
K 205v KM 138 HI 263v HI 360v C8 + 80% 211 marmonero
KM 279 HI 264v 703 ROCCA-03-C 218 elm natural
722 | 422 SYNTHIA -C | -A KM 284 HI 266v 710 | 410 LAIKA -C | -A GI 687 221 textured oak abruzzo
222 textured natural oak
KI 227v KM 286 HI 267v MC 093
223 textured oak barrique
KI 228v MC 094 C8 + 100% 227 japanese pine
KI 229v 754 | 454 TOCCO -C | -A 769 | 469 TOPOS -C | -A 704 ROCCA-04-C 228 weather oak
KH 233h K 032 HI 218v GI 689 229 fjord oak
KI 234v K 100 H 221h GI 690 233 antique oak
234 highland oak
K 103 H 222h GI 691
239 karst oak
719 | 419 ORLANDO -C | -A K 120 H 223h 240 walnut le midi
KI 239v K 130 HI 309v C8 + 110% 241 black walnut
KI 240v K 134 HI 310v 705 ROCCA-05-C 242 virginia oak
262 wild oak alpine
KI 241v K 136 H 312h GI 683
263 wild oak copper
KI 345v K 138 H 313h GI 684
264 wild oak abruzzo
KH 368h K 282 H 316h 266 wild oak barrique
K 284 267 wild oak marsh

K 286 270 graphite grey

273 platinum
277 black
279 midnight blue
282 alpine grey
284 carbon grey
285 basalt grey Structure direction :
286 black slate …v vertical
292 silver …h horizontal
293 metal
1/2022 1/2022
 Discontinued list programmes and front colours

Price group Number Programme Front colours Delivery status

C1 755 SOLARA-C
all decors Available up to KW 31/2022
A1 455 SOLARA-A

C1 722 SYNTHIA-C
KI 230v nordic pine Available up to KW 31/2022
A1 422 SYNTHIA-A

C1 722 SYNTHIA-C
KI 235v limes oak Available up to KW 31/2022
A1 422 SYNTHIA-A

C1 719 ORLANDO-C
KI 386v stone oak  Available up to KW 31/2022
A1 419 ORLANDO-A

C2 782 METEA-C all decors Available up to KW 31/2022

C2 741 MINERA-C
VM 151v camata Available up to KW 31/2022
A2 441 MINERA-A

C6 726 IOS-M-C GM 285 basalt grey Available up to KW 31/2022

C6 728 IOS-C GL 285 basalt grey Available up to KW 31/2022

C6 710 LAIKA-C
MC 095 titan shadow Available up to KW 31/2022
Discontinued list

A6 410 LAIKA-A

Accessory surround
all decors Available up to KW 31/2022
BG = Colour lacquered gloss with plastic thick edge

Availability of discontinued models is limited to the listed items. Subsequently supplied lacquered and wood veneered components will by nature show a different colour shade
to that of existing furniture.

1/2022
Le Corbusier - Colours

CONTINO: 713 CLASSIC-FS-C | 788 LARGO-FG-C

AVANCE: 413 CLASSIC-FS-A | 488 LARGO-FG-A
Please also note the descriptions in the respective programme pages!

FS / FG 011 FS / FG 012 FS / FG 013

gris moyen gris 31 gris foncé 31
(Nr. 32012) * (Nr. 32011) * (Nr. 32010) *

„Colour in architecture - a means as

powerful as the ground plan and the section.
Or better: polychromy, a component of the
ground plan and the section itself.”
Le Corbusier

FS / FG 015 FS / FG 016 FS / FG 017

céruléen pâle céruléen moyen bleu céruléen 31
(Nr. 32034) * (Nr. 32032) * (Nr. 32030) *

Carcase and plinth style

• Recommended carcase edge: K 273 platinum / K 284 carbon grey
• Cost-neutral plinth in carcase colour in K 273 platinum or K 284
carbon grey
Extra charge: Plinth style FS in Le Corbusier – colours

Surround accessories

FS / FG 019 FS / FG 020 FS / FG 021 • Available in FS / FG

vert anglais pâle vert anglais clair vert anglais • Side panels, worktops and niche claddings of glass.
(Nr. 32042) * (Nr. 32041) * (Nr. 32040) *

Pricing
Le Corbusier colours in style FS / FG are available at extra charge per
commission and colour. The extra charge is calculated, irrespective of
the size of the order, for the first part for cupboards and surround ac-
cessories. If several Le Corbusier colours are requested in one order,
then the extra charge must be taken into account for each colour.

Extra charge type: MPLC 550 HLP

FS / FG 023 FS / FG 024 FS / FG 025
ombre naturelle claire ombre naturelle moyenne ombre naturelle 31
(Nr. 32142) * (Nr. 32141) * (Nr. 32140) *

FS / FG 027 FS / FG 028 FS / FG 029

terre sienne claire 31 terre sienne brique l’ocre rouge
(Nr. 32122) * (Nr. 32121) * (Nr. 32110) * *) Number from the LE Corbusier colour system

1/2022 1.01
Le Corbusier - Colours

Front coloured recessed handles

Front coloured recessed handles in horizontal and vertical style are

also available in Le Corbusier colours:

Le Corbusier - Colours

CONTINO
...011 gris moyen

...012 gris 31

...013 gris foncé 31

...015 céruléen pâle

...016 céruléen moyen

...017 bleu céruléen 31

See also page 10.07 / 3.01-02 ...019 vert anglais pâle

...020 vert anglais clair

AVANCE
...021 vert anglais

...023 ombre naturelle claire

...024 ombre naturelle moyenne

...025 ombre naturelle 31

...027 terre sienne claire 31

...028 terre sienne brique

See also page 10.07 / 3.01-02 ...029 l’ocre rouge

1.02 1/2022
Front colours in FF or FS

712 CLASSIC-FF-C | 713 CLASSIC-FS-C

412 CLASSIC-FF-A | 413 CLASSIC-FS-A

FF / FS 032 FF / FS 100 FF / FS 103 FF / FS 120 FF / FS 130

magnolia arctic merino frosty white mohair
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 032 K 100 K 103 K 120 K 130

magnolia arctic merino frosty white mohair

Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth:

K 032 FF/FS 032 MP K 100 FF/FS 100 MP K 103 FF/FS 103 MP K 120 FF/FS 120 MP K 130 FF/FS 130 MP
magnolia magnolia arctic arctic merino merino frosty white frosty white mohair mohair

Surround accessories: Surround accessories: Surround accessories: Surround accessories: Surround accessories:

K 032 FF/FS 032 K 100 FF/FS 100 K 103 FF/FS 103 K 120 FF/FS 120 K 130 FF/FS 130
magnolia magnolia arctic arctic merino merino frosty white frosty white mohair mohair

FF / FS 134 FF / FS 136 FF / FS 137 FF / FS 138 FF / FS 139

olive grey sand grey taupe grey fossil grey lava
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 134 K 136 K 137 K 138 K 139

olive grey sand grey taupe grey fossil grey lava

Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth:

K 134 FF/FS 134 MP K 136 FF/FS 136 MP FF/FS 137 MP K 138 FF/FS 138 MP K 139 FF/FS 139 MP
olive grey olive grey sand grey sand grey taupe grey fossil grey fossil grey lava lava

Surround accessories: Surround accessories: Surround accessories: Surround accessories: Surround accessories:

K 134 FF/FS 134 K 136 FF/FS 136 FF/FS 137 FF/FS 138 K 139 FF/FS 139
olive grey olive grey sand grey sand grey taupe grey fossil grey lava lava

FF/FS ... MP
MP = Extra charge

1/2022 1.03
Front colours in FF or FS

712 CLASSIC-FF-C | 713 CLASSIC-FS-C

412 CLASSIC-FF-A | 413 CLASSIC-FS-A

FF

FF / FS 273 FF 277 FF / FS 279 FF / FS 282 FF / FS 284

platinum black midnight blue alpine grey carbon grey
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 273 K 286 K 279 K 282 K 284

platinum black slate midnight blue alpine grey carbon grey

Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth:

K 273 FF/FS 273 MP FF 277 MP FF/FS 279 MP K 282 FF/FS 282 MP K 284 FF/FS 284 MP
platinum platinum black midnight blue alpine grey alpine grey carbon grey carbon grey

Surround accessories: Surround accessories: Surround accessories: Surround accessories: Surround accessories:

K 273 FF/FS 273 FF 277 FF/FS 279 K 282 FF/FS 282 K 284 FF/FS 284
platinum platinum black midnight blue alpine grey alpine grey carbon grey carbon grey

FS
Special lacquering from the colour systems RAL “Classic” or “Design” (ex-
RAL / NCS cluding metallic and luminescent paints) / NCS are available in matching
surface texture at extra charge per order and colour.
The extra charge will be calculated independently from the order volume,
initially for cupboards and accessory components. If several RAL-/NCS-colours
are requested with the same order, then the extra charge has to be taken into
consideration for each colour.
Carcase edges can be taken from the ranges in chapter 11.
Normal delivery time is extended by 5 working days.

Extra charge-type: MPRAL 423 HLP

Minimal colour deviations from the sample colours of the RAL-colour cards
FF / FS 285 FS 286 FF / FS RAL cannot be excluded as older sample cards experience change through light
basalt grey black slate RAL-/NCS-colours influence.
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 284 K 286 K 273 K 284

carbon grey black slate platinum carbon grey
RAL / NCS
Recommended plinth: Recommended plinth: Recommended plinth:

FF/FS 285 MP K 286 FS 286 MP FF/FS RAL MP

basalt grey black slate black slate
RAL / NCS
RAL-/NCS-colours

Surround accessories: Surround accessories: Surround accessories:

FF/FS 285 K 286 FS 286 FF/FS RAL

basalt grey black slate black slate RAL-/NCS-colours

FF/FS ... MP
MP = Extra charge

1.04 1/2022
CONTINO
Front combinations

Interesting front designs are possible with contrasting front col- All programmes with smooth design can be combined whilst the
ours from one programme or from two different programmes edge radii and front thicknesses can differ.
for the upper pull-out band of floor units. Cupboards with
two drawers above are also available with front combinations.

Ordering organisation The programme below the pull-out band is called Core pro- In the version coloured grip handle (No.886), the grip handles
gramme. The Combination programme is formed by the are tailored to the respective front colour of the core programme
pull-out or two drawers. The combination is controlled via the (standard). Please state if an alternative is desired.
alteration code CAN FK … . It is essential to state the de-
sired combination programme and colour for each cupboard.

Combination programme

Core programme
(Head programme)

Available CERES-C C1 BONDI-C C2 CLASSIC-FS-C C4 BOSSA-C C7

core and combination
SIRIUS-C C1 MARMO-C C2 PEARL-C C4 CONCRETE-C C7
programmes
IKONO-C C1 MINERA-C C2 STONE-C C7
SYNTHIA-C C1 SELVA-C C2 LARGO-FG-C C5 STEEL-C C7
ORLANDO-C C1 MADERO-C C5
CLASSIC-FF-C C3 SOLID-C C5 ALURO-C C8
F 45-C C3 TOPOS-C C5 VALAIS-C C8
TOCCO-C C3
LAIKA-C C6
TERMA-C C6

Ordering examples: a) Core programme = Combination programme

Colour change only within a programme. CAN FK 0
Core programme: 712 CLASSIC-FF-C (price group C3) Combination programme: 712 CLASSIC-FF-C (price group C3)
Colour: FF 120 frosty white Colour: FF 284 carbon grey
Grip handle colour: 120 frosty white Grip handle colour: 284 carbon grey

b) Price group Combination programme smaller or equal

Price group Core programme CAN FK 1
Core programme: 769 TOPOS-C (price group C5) Combination programme: 712 CLASSIC-FF-C (price group C3)
Colour: H 222h textured natural oak Colour: FF 120 frosty white
Grip handle colour: 222 textured nat. oak Grip handle colour: 120 frosty white

c) Price group Combination programme larger

Price group Core programme CAN FK 2
Core programme: 713 CLASSIC-FS-C (price group C4) Combination programme: 768 MADERO-C (price group C5)
Colour: FS 120 frosty white Colour: HI 264v wild oak abruzzo
Grip handle colour: 120 frosty white Grip handle colour: 264 wild oak abruzzo

1/2022 1.05
 Price group
CONTINO Front combinations

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Front combination CANFK0 26 26 26 26 26 26 26 26
1 pullout front, blender or
2 drawer fronts in the style of
combinations programme
Combination programme as core programme,
but with change of colours

In this combination a colour change is provided exclusively

in the same programme.
All programmes are permitted.
Please state combination programme and colour.

Front combination CANFK1 26 26 26 26 26 26 26 26

1 pullout front, blender or
Not available in IOS-C, IOS-M-C
2 drawer fronts in the style of
combinations programme
Combination programme in the same or lower
price group than the core programme

Please state combination programme and colour.

Front combination CANFK2 26 26 31 55 78 103 136 162

1 pullout front, blender or
Not available in IOS-C, IOS-M-C
2 drawer fronts in the style of
combinations programme
Combination programme in a higher price group
than the core programme

Please state combination programme and colour.

1.06 1/2022
AVANCE
Front combinations

Interesting front designs are possible with contrasting front All programmes with smooth design can be combined whilst the
colours from one programme or from two different pro- edge radii and front thicknesses can be different.
grammes for the upper drawer band of floor units. Units with
blenders above are also available with front combinations.

Ordering organisation The programme below the drawer band is called Core programme. version coloured grip handle (No.886), the grip handles are tailored
The combination programme is formed by the drawer band or a to the respective front colour of the core programme.
13 cm high blender. The combination is controlled via the alteration
code AAN FK … . For this purpose it is essential to state the de-
sired combination programme and colour for each cupboard. In the

Combination programme

Core programme
(Head programme)

Available CERES-A A1 BONDI-A A2 CLASSIC-FS-A A4 CONCRETE-A A7

core and combination
SIRIUS-A A1 MARMO-A A2 PEARL-A A4 STONE-A A7
programmes
IKONO-A A1 MINERA-A A2 STEEL-A A7
SYNTHIA-A A1 SELVA-A A2 LARGO-FG-A A5
ORLANDO-A A1 MADERO-A A5
CLASSIC-FF-A A3 TOPOS-A A5
F 45-A A3
TOCCO-A A3 LAIKA-A A6
TERMA-A A6

Ordering examples: a) Core programme = Combination programme

Colour change only within a programme. AAN FK 0
Core programme: 412 CLASSIC-FF-A (price group A3) Combination programme: 412 CLASSIC-FF-A (price group A3)
Colour: FF 120 frosty white Colour: FF 284 carbon grey
Grip handle colour: 120 frosty white Grip handle colour: 120 frosty white

b) Price group combination programme smaller or equal

Price group core programme AAN FK 1
Core programme: 469 TOPOS-A (price group A5) Combination programme: 412 CLASSIC-FF-A (price group A3)
Colour: H 222h textured natural oak Colour: FF 120 frosty white
Grip handle colour: 222 textured nat. oak Grip handle colour: 222 textured nat. oak

c) Price group combination programme larger

Price group core programme AAN FK 2
Core programme: 413 CLASSIC-FS-A (price group A4) Combination programme: 468 MADERO-A (price group A5)
Colour: FS 120 frosty white Colour: HI 264v wild oak abruzzo
Grip handle colour: 120 frosty white Grip handle colour: 120 frosty white

1/2022 1.07
 Price group
AVANCE Front combinations

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Front combination AANFK0 26 26 26 26 26 26 26
1 drawer front or blender in the style of
combinations programme
Combination programme as core programme,
but with change of colours

In this combination a colour change is provided exclusively

in the same programme.
All programmes are permitted.
Please state combination programme and colour.

Front combination AANFK1 26 26 26 26 26 26 26

1 drawer front or blender in the style of
combinations programme
Combination programme in the same or lower
price group than the core programme

Please state combination programme and colour.

Front combination AANFK2 26 26 26 27 58 83 105

1 drawer front or blender in the style of
combinations programme
Combination programme in a higher price group
than the core programme

Please state combination programme and colour.

1.08 1/2022
CERES-C | CERES-A
CONTINO | AVANCE

Programme number 733 | 433

Price group C1 | A1

Melamine resin covered laminate front. Front and reverse side single
coloured with matt texture. All edges rounded thick edge plastic.

Front thickness 19,0 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

K 032 K 100 K 103

magnolia arctic merino
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 032 K 100 K 103

Frame in front colour. magnolia arctic merino

See glass type on page 10.13. Recommended plinth: Recommended plinth: Recommended plinth:

K 032 K 100 K 103

magnolia arctic merino

Surround accessories: Surround accessories: Surround accessories:

K 032 K 100 K 103

magnolia arctic merino
Edging

Edge in front colour VS 405 **

stainless steel

K 120 K 130 K 134

frosty white mohair olive grey
It is essential to state
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:
edge type on order!

K 120 K 130 K 134

frosty white mohair olive grey

Recommended plinth: Recommended plinth: Recommended plinth:

K 120 K 130 K 134

frosty white mohair olive grey

Surround accessories: Surround accessories: Surround accessories:

K 120 K 130 K 134

frosty white mohair olive grey
** Edge type in AVANCE not possible!
1/2022 1.09
CERES-C | CERES-A
CONTINO | AVANCE

Programme number 733 | 433

Price group C1 | A1

Melamine resin covered laminate front. Front and reverse side single
coloured with matt texture. All edges rounded thick edge plastic.

Front thickness 19,0 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

K 136 K 138 K 273

sand grey fossil grey platinum
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 136 K 138 K 273

Frame in front colour. sand grey fossil grey platinum

See glass type on page 10.13. Recommended plinth: Recommended plinth: Recommended plinth:

K 136 K 138 K 273

sand grey fossil grey platinum

Surround accessories: Surround accessories: Surround accessories:

K 136 K 138 K 273

sand grey fossil grey platinum
Edging

Edge in front colour VS 405 **

stainless steel

K 282
alpine grey
It is essential to state
Recommended carcase edge:
edge type on order!

K 282
alpine grey

Recommended plinth:

K 282
alpine grey

Surround accessories:

K 282
alpine grey
** Edge type in AVANCE not possible!
1.10 1/2022
SIRIUS-C | SIRIUS-A
CONTINO | AVANCE

Programme number 715 | 415

Price group C1 | A1

Front with high gloss brilliant lacquered surface. Reverse side white
melamine. The colours BG 138 and BG 284 are executed in the same
colour. All edges rounded thick edge plastic.

Front thickness 18,0 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

If possible plan with surround accessories in front material BG (WF ..,

RWF .., WVF ..).

Glass door Front colours

BG 032 BG 100 BG 103

magnolia arctic merino
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 032 K 100 K 103

Frame in front colour. magnolia arctic merino

See glass type on page 10.13. Recommended plinth: Recommended plinth: Recommended plinth:

KG 032 KG 100 KG 103

magnolia arctic merino

Surround accessories: Surround accessories: Surround accessories:

KG 032 KG 100 KG 103

magnolia arctic merino
Edging

Edge in front colour VS 405 **

stainless steel

BG 120
frosty white
BG 130
mohair
BG 134
olive grey
*
It is essential to state
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:
edge type on order!

665 **
Glass effect
* Not possible! K 120
frosty white
K 130
mohair
K 134
olive grey

Recommended plinth: Recommended plinth: Recommended plinth:

KG 120 KG 130 KG 134

frosty white mohair olive grey

Surround accessories: Surround accessories: Surround accessories:

KG 120 KG 130 KG 134

frosty white mohair olive grey
** Edge type in AVANCE not possible!
1/2022 1.11
SIRIUS-C | SIRIUS-A
CONTINO | AVANCE

Programme number 715 | 415

Price group C1 | A1

Front with high gloss brilliant lacquered surface. Reverse side white
melamine. The colours BG 138 and BG 284 are executed in the same
colour. All edges rounded thick edge plastic.

Front thickness 18,0 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

If possible plan with surround accessories in front material BG (WF ..,

RWF .., WVF ..).

Glass door Front colours

BG 138
fossil grey
* BG 273
platinum
BG 284
carbon grey
*
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 138 K 273 K 284

Frame in front colour. fossil grey platinum carbon grey

See glass type on page 10.13. Recommended plinth: Recommended plinth: Recommended plinth:

KG 138 KG 273 KG 284

fossil grey platinum carbon grey

Surround accessories: Surround accessories: Surround accessories:

KG 138 KG 273 KG 284

fossil grey platinum carbon grey
Edging

Edge in front colour VS 405 **

stainless steel

It is essential to state
edge type on order!

665 **
Glass effect
* Not possible!

** Edge type in AVANCE not possible!

1.12 1/2022
IKONO-C | IKONO-A
CONTINO | AVANCE

Programme number 721 | 421

Price group C1 | A1

Melamine resin covered front. Front and reverse side with concrete
décor and spatula texture. Circumferential rounded plastic thick
edges in matching front colour.

Front thickness 19,0 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

Frame in front colour. K 201v K 202v K 205v

keraton liton neroton
See glass type on page 10.13. Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 201 K 202 K 205

keraton liton neroton

Recommended plinth: Recommended plinth: Recommended plinth:

K 201h K 202h K 205h

keraton liton neroton

Surround accessories: Surround accessories: Surround accessories:

K 201 K 202 K 205

keraton liton neroton

1/2022 1.13
SYNTHIA-C | SYNTHIA-A
CONTINO | AVANCE

Programme number 722 | 422

Price group C1 | A1

Melamine resin coated laminate front. Front and reverse side with
matching décor. Surfaces in style KI are fashioned with grain figur-
ing. The authentic effect of the wood reproduction is further en-
hanced through the texture of the graining, which in turn comple-
ments the décor. Softened plastic thick edging all round.

Front thickness 19,0 mm (KI 234v =18,5 mm).

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

KI 227v KI 228v KI 229v

japanese pine (vertical) weather oak (vertical) fjord oak (vertical)
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

KH 227 KH 228 KH 229

Frame in front colour. japanese pine weather oak fjord oak

See glass type on page 10.13. Recommended plinth: Recommended plinth: Recommended plinth:

KH 227h KH 228h KH 229h

japanese pine weather oak fjord oak

Surround accessories: Surround accessories: Surround accessories:

KH 227 KH 228 KH 229

japanese pine weather oak fjord oak

KH 233h KI 234v
antique oak (horizontal) highland oak (vertical)
Recommended carcase edge: Recommended carcase edge:

KH 233 KH 234
antique oak highland oak

Recommended plinth: Recommended plinth:

KH 233h KH 234h
antique oak highland oak

Surround accessories: Surround accessories:

KH 233 KH 234
antique oak highland oak

1.14 1/2022
ORLANDO-C | ORLANDO-A
CONTINO | AVANCE

Programme number 719 | 419

Price group C1 | A1

Melamine resin covered laminate front. Front and reverse side in

textured décor. Surfaces in style KI are fashioned with grain figuring.
All edges rounded thick plastic.

Front thickness 19,0 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

KI 239v KI 240v KI 241v

karst oak (vertical) walnut le midi (vertical) black walnut (vertical)
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

KH 239 KH 240 KH 241

Frame in front colour. karst oak walnut le midi black walnut

See glass type on page 10.13. Recommended plinth: Recommended plinth: Recommended plinth:

KH 239h KH 240h KH 241h

karst oak walnut le midi black walnut

Surround accessories: Surround accessories: Surround accessories:

KH 239 KH 240 KH 241

karst oak walnut le midi black walnut
Edging

Edge in front colour VS 405 **

stainless steel

KI 345v KH 368h
mountain robinia (vertical) tennessee walnut (horizontal)
It is essential to state
Recommended carcase edge: Recommended carcase edge:
edge type on order!

KH 345 KH 368
mountain robinia tennessee walnut

Recommended plinth: Recommended plinth:

KH 345h KH 368h
mountain robinia tennessee walnut

Surround accessories: Surround accessories:

KH 345 KH 368
mountain robinia tennessee walnut
** Edge type in AVANCE not possible!
1/2022 1.15
BONDI-C | BONDI-A
CONTINO | AVANCE

Programme number 739 | 439

Price group C2 | A2

Front finished with super matt lacquer. The special lacquer finish has a
pleasant surface feel and an anti-fingerprint effect. The reverse side is
white melamine. The colours VM 134 / VM 138 / VM 284 / VM 286
are matching. Circumferential rounded thick plastic edges in matching
front colour.

Front thickness 18,3 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

VM 100
arctic
VM 103
merino
VM 120
frosty white
*
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 100 K 103 K 120

Frame in front colour. arctic merino frosty white

See glass type on page 10.13. Recommended plinth: Recommended plinth: Recommended plinth:

K 100 VM 100 MP K 103 VM 103 MP K 120 VM 120 MP

arctic arctic merino merino frosty white frosty white

Surround accessories: Surround accessories: Surround accessories:

K 100 / VM 100 K 103 / VM 103 K 120 / VM 120

arctic merino frosty white
Edging

Edge in front colour 667 ** *

Possible!
solid oak appearance

VM 130 VM 134 VM 138

mohair olive grey fossil grey
It is essential to state
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:
edge type on order!

670 K 130 K 134 K 138

mohair olive grey fossil grey
Edges bevelled
Recommended plinth: Recommended plinth: Recommended plinth:

K 130 VM 130 MP K 134 VM 134 MP K 138 VM 138 MP

mohair mohair olive grey olive grey fossil grey fossil grey

Surround accessories: Surround accessories: Surround accessories:

VM ... MP K 130 / VM 130 K 134 / VM 134 K 138 / VM 138

MP = Extra charge mohair olive grey fossil grey
** Edge type in AVANCE not possible!
1.16 1/2022
BONDI-C | BONDI-A
CONTINO | AVANCE

Programme number 739 | 439

Price group C2 | A2

Front finished with super matt lacquer. The special lacquer finish has a
pleasant surface feel and an anti-fingerprint effect. The reverse side is
white melamine. The colours VM 134 / VM 138 / VM 284 / VM 286
are matching. Circumferential rounded thick plastic edges in matching
front colour.

Front thickness 18,3 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

VM 284 VM 286
carbon grey black slate
Recommended carcase edge: Recommended carcase edge:

K 284 K 286
Frame in front colour. carbon grey black slate

See glass type on page 10.13. Recommended plinth: Recommended plinth:

K 284 VM 284 MP VM 286 MP

carbon grey carbon grey black slate

Surround accessories: Surround accessories:

K 284 / VM 284 VM 286

carbon grey black slate
Edging

Edge in front colour 667 ** *

Possible!
solid oak appearance

It is essential to state
edge type on order!

670
Edges bevelled

VM ... MP
MP = Extra charge
** Edge type in AVANCE not possible!
1/2022 1.17
MARMO-C | MARMO-A
CONTINO | AVANCE

Programme number 720 | 420

Price group C2 | A2

Front with melamine resin coating and super matt lacquer on the
front. The special lacquering with a pleasant surface feel is produced
with an anti-fingerprint effect. Reverse side with decor matching mel-
amine resin coating. Rounded plastic thick edges all round.

Front thickness 19,0 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

Frame in front colour. VI 210v VI 211v

marmobianco marmonero
See glass type on page 10.13.
Recommended carcase edge: Recommended carcase edge:

K 210 K 211
marmobianco marmonero

Recommended plinth: Recommended plinth:

VM 210h MP VM 211h MP
marmobianco marmonero

Surround accessories: Surround accessories:

VM 210 VM 211
marmobianco marmonero

VM ... MP
MP = Extra charge

1.18 1/2022
MINERA-C | MINERA-A
CONTINO | AVANCE

Programme number 741 | 441

Price group C2 | A2

Front with melamine resin coating and super matt lacquer on the
front face. A special lacquering, pleasant to the touch, also includes
an anti-fingerprint effect. The reverse side has the same décor mela-
mine resin coating. Thick plastic edges all round.

Front thickness 18,3 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

Frame in front colour. VM 152v

kiruna
See glass type on page 10.13.
Recommended carcase edge:

K 152
kiruna

Recommended plinth:

VM 152h MP
kiruna

Surround accessories:

VM 152
kiruna

VM ... MP
MP = Extra charge

1/2022 1.19
SELVA-C | SELVA-A
CONTINO | AVANCE

Programme number 718 | 418

Price group C2 | A2

Laminate composite front with expressive, matt wood texture radi-

ating naturalness through the deep embossing. Reverse side with
matching décor and all-round matching thick ABS edge.

Front thickness 18,8 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

Frame in front colour. KI 242v

virginia oak (vertical)
See glass type on page 10.13. Recommended carcase edge:

KH 242
virginia oak

Recommended plinth:

KH 242h
virginia oak

Surround accessories:

KH 242
virginia oak

1.20 1/2022
CLASSIC-FF-C | CLASSIC-FF-A
CONTINO | AVANCE

Programme number 712 | 412

Price group C3 | A3

Lacquered front on high quality MDF-base. Front and reverse side

single colour lacquer with finely textured surface. Edges are slightly
radiused all round.

Front thickness 19,5 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

Frame in front colour. FF 100 FF 103 FF 120

arctic merino frosty white
See glass type on page 10.13. Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 100 K 103 K 120

arctic merino frosty white

Recommended plinth: Recommended plinth: Recommended plinth:

K 100 FF 100 MP K 103 FF 103 MP K 120 FF 120 MP

arctic arctic merino merino frosty white frosty white

Surround accessories: Surround accessories: Surround accessories:

K 100 FF 100 K 103 FF 103 K 120 FF 120

arctic arctic merino merino frosty white frosty white

Further lacquer colours see pages 1.03-04

FF 032 FF 100 FF 103

FF 120 FF 130 FF 134

FF 136 FF 137 FF 138

RAL / NCS
FF 139 FF 273 FF 277

FF 279 FF 282 FF 284

FF ... MP
MP = Extra charge FF 285 FF RAL / NCS
1/2022 1.21
F 45-C | F 45-A made by
CONTINO | AVANCE

Programme number 753 | 453

Price group C3 | A3

Laminate front of original material. Reverse side plain col-

oured matt matching. All round 45° bevelled plastic thick edges.

Front thickness 19,3 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Low light reflectivity Soft touch Anti-fingerprint Thermal healing

Glass door Front colours

KM 100 KM 103 KM 120

arctic merino frosty white
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 100 K 103 K 120

Frame in front colour. arctic merino frosty white

See glass type on page 10.13. Recommended plinth: Recommended plinth: Recommended plinth:

K 100 KM 100 MP K 103 KM 103 MP K 120 KM 120 MP

arctic arctic merino merino frosty white frosty white

Surround accessories: Surround accessories: Surround accessories:

K 100 KM/VM100 MP K 103 KM/VM103 MP K 120 KM/VM120 MP

arctic arctic merino merino frosty white frosty white

KM 130 KM 134 KM 137

mohair olive grey taupe grey
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 130 K 134 K 137

mohair olive grey taupe grey

Recommended plinth: Recommended plinth: Recommended plinth:

K 130 KM 130 MP K 134 KM 134 MP KM 137 MP

mohair mohair olive grey olive grey taupe grey

Surround accessories: Surround accessories: Surround accessories:

KM/VM ... MP
MP = Extra charge K 130 KM/VM130 MP K 134 KM/VM134 MP KM137 MP
mohair mohair olive grey olive grey taupe grey

1.22 1/2022
F 45-C | F 45-A made by
CONTINO | AVANCE

Programme number 753 | 453

Price group C3 | A3

Laminate front of original material. Reverse side plain col-

oured matt matching. All round 45° bevelled plastic thick edges.

Front thickness 19,3 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Low light reflectivity Soft touch Anti-fingerprint Thermal healing

Glass door Front colours

KM 138 KM 279 KM 284

fossil grey midnight blue carbon grey
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 138 K 279 K 284

Frame in front colour. fossil grey midnight blue carbon grey

See glass type on page 10.13. Recommended plinth: Recommended plinth: Recommended plinth:

K 138 KM 138 MP KM 279 MP K 284 KM 284 MP

fossil grey fossil grey midnight blue carbon grey carbon grey

Surround accessories: Surround accessories: Surround accessories:

KM/VM138 MP KM279 MP K 284 KM/VM284 MP

fossil grey midnight blue carbon grey carbon grey

KM 286
black slate
Recommended carcase edge:

K 286
black slate

Recommended plinth:

K 286 KM 286 MP
black slate black slate

Surround accessories:

FS ... MP KM/VM ... MP

MP = Extra charge MP = Extra charge K 286 KM/VM286 MP
black slate black slate

1/2022 1.23
TOCCO-C | TOCCO-A
CONTINO | AVANCE

Programme number 754 | 454

Price group C3 | A3

High quality laminate front. The front has a soft matt surface. The
reverse side with matching décor, matt texture. The colours K 284
and K 286 have an anti-fingerprint effect. Vertical edges in post
forming style (radius 2 mm). Horizontal thick edges in front colour.

Front thickness 19,5 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

K 032 K 100 K 103

magnolia arctic merino
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 032 K 100 K 103

Frame in front colour. magnolia arctic merino

See glass type on page 10.13. Recommended plinth: Recommended plinth: Recommended plinth:

K 032 FS 032 MP K 100 FS 100 MP K 103 FS 103 MP

magnolia magnolia arctic arctic merino merino

Surround accessories: Surround accessories: Surround accessories:

K 032 FS 032 K 100 FS 100 K 103 FS 103

magnolia magnolia arctic arctic merino merino

K 120 K 130 K 134

frosty white mohair olive grey
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 120 K 130 K 134

frosty white mohair olive grey

Recommended plinth: Recommended plinth: Recommended plinth:

K 120 FS 120 MP K 130 FS 130 MP K 134 FS 134 MP

frosty white frosty white mohair mohair olive grey olive grey

Surround accessories: Surround accessories: Surround accessories:

FS ... MP
MP = Extra charge K 120 FS 120 K 130 FS 130 K 134 FS 134
frosty white frosty white mohair mohair olive grey olive grey

1.24 1/2022
TOCCO-C | TOCCO-A
CONTINO | AVANCE

Programme number 754 | 454

Price group C3 | A3

High quality laminate front. The front has a soft matt surface. The
reverse side with matching décor, matt texture. The colours K 284
and K 286 have an anti-fingerprint effect. Vertical edges in post
forming style (radius 2 mm). Horizontal thick edges in front colour.

Front thickness 19,5 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

K 136 K 138 K 282

sand grey fossil grey alpine grey
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 136 K 138 K 282

Frame in front colour. sand grey fossil grey alpine grey

See glass type on page 10.13. Recommended plinth: Recommended plinth: Recommended plinth:

K 136 FS 136 MP K 138 FS 138 MP K 282 FS 282 MP

sand grey sand grey fossil grey fossil grey alpine grey alpine grey

Surround accessories: Surround accessories: Surround accessories:

K 136 FS 136 K 138 FS 138 K 282 FS 282

sand grey sand grey fossil grey fossil grey alpine grey alpine grey

K 284 K 286
carbon grey black slate
Recommended carcase edge: Recommended carcase edge:

K 284 K 286
carbon grey black slate

Recommended plinth: Recommended plinth:

K 284 FS 284 MP K 286 FS 286 MP

carbon grey carbon grey black slate black slate

Surround accessories: Surround accessories:

FS ... MP
MP = Extra charge K 284 FS 284 K 286 FS 286
carbon grey carbon grey black slate black slate

1/2022 1.25
PEARL-C | PEARL-A
CONTINO | AVANCE

Programme number 740 | 440

Price group C4 | A4

Front with 2 mm thick polymer composite coating, consisting of a

metallic colour layer and transparent acrylic glass. The scratch resist-
ant anti-fingerprint sealing of the matt acrylic surface comes into its
own with the flawless effect of the shimmering metallic undertone.
The all-round edging, with a machined bevel right into the surface,
enhances the metallic effect through the refraction of light in the
acrylic layer. MDF support panel, reverse side with colour matching
backing.

Front thickness 19,0 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

Frame in front colour. PM 070 PM 071

citrine opal
See glass type on page 10.13. Recommended carcase edge: Recommended carcase edge:

K 134 K 284
olive grey carbon grey

Recommended plinth: Recommended plinth:

ME 770 ME 771
citrine opal

Surround accessories: Surround accessories:

ME 770 ME 771
citrine opal

1.26 1/2022
CLASSIC-FS-C | CLASSIC-FS-A
CONTINO | AVANCE

Programme number 713 | 413

Price group C4 | A4

Lacquered front on high grade MDF-base. Front plain coloured matt

lacquer. Reverse side matt satin finished, lacquered. Edges all round
lightly radiused.

Front thickness 19,5 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

Frame in front colour. FS 100 FS 103 FS 120

arctic merino frosty white
See glass type on page 10.13. Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 100 K 103 K 120

arctic merino frosty white

Recommended plinth: Recommended plinth: Recommended plinth:

K 100 FS 100 MP K 103 FS 103 MP K 120 FS 120 MP

arctic arctic merino merino frosty white frosty white

Surround accessories: Surround accessories: Surround accessories:

K 100 FS 100 K 103 FS 103 K 120 FS 120

arctic arctic merino merino frosty white frosty white

Further lacquer colours see pages 1.01-04

FS 032 FS 100 FS 103

FS 120 FS 130 FS 134

FS 136 FS 137 FS 138

RAL / NCS
FS 139 FS 273 FS 279

FS 282 FS 284 FS 285

FS ... MP
MP = Extra charge FS 286 FS RAL / NCS
1/2022 1.27
LARGO-FG-C | LARGO-FG-A
CONTINO | AVANCE

Programme number 788 | 488

Price group C5 | A5

Lacquered front on high quality MDF base. All edges lightly round-
ed. Front face and edge high gloss lacquered, reverse side matching
colour with velvety matt lacquered surface.

Front thickness 19,5 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours * Front colour matching Miele appliance colours.

FG 032 FG 100 FG 103

magnolia arctic merino
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 032 K 100 K 103

Frame in front colour. magnolia arctic merino

See glass type on page 10.13. Recommended plinth: Recommended plinth: Recommended plinth:

KG 032 FG 032 MP KG 100 FG 100 MP KG 103 FG 103 MP

magnolia magnolia arctic arctic merino merino

Surround accessories: Surround accessories: Surround accessories:

KG 032 FG 032 KG 100 FG 100 KG 103 FG 103

magnolia magnolia arctic arctic merino merino

FG 106 * FG 120 FG 130

brilliant white frosty white mohair
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 120 K 120 K 130

frosty white frosty white mohair

Recommended plinth: Recommended plinth: Recommended plinth:

FG 106 MP KG 120 FG 120 MP KG 130 FG 130 MP

brilliant white frosty white frosty white mohair mohair

Surround accessories: Surround accessories: Surround accessories:

FG ... MP FG 106 KG 120 FG 120 KG 130 FG 130

MP = Extra charge brilliant white frosty white frosty white mohair mohair

1.28 1/2022
LARGO-FG-C | LARGO-FG-A
* Front colour matching Miele appliance colours.

FG 134 FG 136 FG 137 FG 138 FG 270 *

olive grey sand grey taupe grey fossil grey graphite grey
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 134 K 136 K 137 K 138 K 138

olive grey sand grey taupe grey fossil grey fossil grey

Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth:

KG 134 FG 134 MP KG 136 FG 136 MP FG 137 MP K 138 FG 138 MP FG 270 MP

olive grey olive grey sand grey sand grey taupe grey fossil grey fossil grey graphite grey

Surround accessories: Surround accessories: Surround accessories: Surround accessories: Surround accessories:

KG 134 FG 134 KG 136 FG 136 FG 137 FG 138 FG 270

olive grey olive grey sand grey sand grey taupe grey fossil grey graphite grey

FG 273 FG 277 * FG 279 FG 282 FG 284

platinum black midnight blue alpine grey carbon grey
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 273 K 286 K 279 K 282 K 284

platinum black slate midnight blue alpine grey carbon grey

Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth:

KG 273 FG 273 MP KG 277 FG 277 MP FG 279 MP KG 282 FG 282 MP KG 284 FG 284 MP

platinum platinum black black midnight blue alpine grey alpine grey carbon grey carbon grey

Surround accessories: Surround accessories: Surround accessories: Surround accessories: Surround accessories:

KG 273 FG 273 KG 277 FG 277 FG 279 KG 282 FG 282 KG 284 FG 284

platinum platinum black black midnight blue alpine grey alpine grey carbon grey carbon grey

RAL / NCS Special lacquering from the colour systems RAL “Classic” or “Design” (ex-
cluding metallic and luminescent paints) / NCS are available in matching
surface texture at extra charge per order and colour.

The extra charge will be calculated independently from the order volume,
initially for cupboards and accessory components. If several RAL-/NCS-colours
are requested with the same order, then the extra charge has to be taken into
consideration for each colour.
FG 286 FG RAL Carcase edges can be taken from the ranges in chapter 11.
black slate RAL-/NCS-colours
Normal delivery time is extended by 5 working days.
Recommended carcase edge: Recommended carcase edge:

Extra charge-type: MPRAL 423 HLP

K 286 K 273 K 284 Minimal colour deviations from the sample colours of the RAL-colour cards
black slate platinum carbon grey cannot be excluded as older sample cards experience change through light
RAL / NCS
Recommended plinth: Recommended plinth:
influence.

K 286 FG 286 MP FG RAL MP

black slate black slate
RAL / NCS
RAL-/NCS-colours

Surround accessories: Surround accessories:

FG 286 FG RAL FG ... MP

black slate RAL-/NCS-colours MP = Extra charge

1/2022 1.29
SOLID-C
CONTINO

Programme number 742

Price group C5

Elaborately processed front from a combination of high quality ma-

terials. Cover layers of solid colour laminate, front super matt (dark
colours anti-fingerprint version KM). The oiled wood veneer edge is
glued all-round between the cover layers. The edge change across the
corner from length- to end-grain gives the plain coloured front the
unique appearance of solid wood base.

Front thickness 17,5 mm.

Edging Front colours

668 669
solid oak walnut

It is essential to state
edge type on order!

K 120v KM 284v
frosty white carbon grey
Recommended carcase edge: Recommended carcase edge:

K 120 K 284
frosty white carbon grey

Recommended plinth: Recommended plinth:

K 120 K 284 KM/VM 284 MP

frosty white carbon grey carbon grey

Surround accessories: Surround accessories:

K 120 K 284 KM/VM 284 MP

frosty white carbon grey carbon grey

KM/VM ... MP
MP = Extra charge

1.30 1/2022
MADERO-C | MADERO-A
CONTINO | AVANCE

Programme number 768 | 468

Price group C5 | A5

Authentic wood veneer front with old wood character and vertical
grain pattern. Both sides have expressive and attractively textured
thick veneers on a black glue background. The front particularly, is
manufactured with intergrown or open knots and not cemented
cracks. The partly vividly veined growth with mirrors, alternating with
plainer veneer sheets, creates the pronounced board-like character of
this programme. All-round veneered edge with natural water-based
stain and lacquer-system surface sealing.

Front thickness 19,4 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

HI 262v HI 263v HI 264v

wild oak alpine wild oak copper wild oak abruzzo
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

KH 234 KH 234 KH 368

Frame in front colour. highland oak highland oak tennessee walnut

See glass type on page 10.13. Recommended plinth: Recommended plinth: Recommended plinth:

H 262h MP H 263h MP H 264h MP

wild oak alpine wild oak copper wild oak abruzzo

Surround accessories: Surround accessories: Surround accessories:

H 262 H 263 H 264

wild oak alpine wild oak copper wild oak abruzzo

HI 266v HI 267v
wild oak barrique wild oak marsh
Recommended carcase edge: Recommended carcase edge:

KH 345 K 286
mountain robinia black slate

Recommended plinth: Recommended plinth:

H 266h MP H 267h MP
wild oak barrique wild oak marsh

Surround accessories: Surround accessories:

H ... MP H 266 H 267

MP = Extra charge wild oak barrique wild oak marsh

1/2022 1.31
TOPOS-C | TOPOS-A
CONTINO | AVANCE

Programme number 769 | 469

Price group C5 | A5

Front veneered in oak, ash, walnut or elm. Styles in striking brushed

wood texture with seemingly transparent colouring. A choice of stag-
gered planked wood emphasises the natural quality of the wood.
Solid wood edges applied all round. Surface sealed with environment-
friendly PUR-lacquer.

Front thickness 18,8 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

HI 218v H 221h H 222h

elm natural textured oak abruzzo (hor.) textured natural oak (hor.)
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

KH 234 KH 368 KH 234

Solid oak framed glass door. highland oak tennessee walnut highland oak
See glass type on page 10.13.
Recommended plinth: Recommended plinth: Recommended plinth:

H 218h MP H 221h MP H 222h MP

elm natural textured oak abruzzo textured natural oak

Surround accessories: Surround accessories: Surround accessories:

H 218 H 221 H 222

elm natural textured oak abruzzo textured natural oak

H 223h HI 309v HI 310v

textured oak barrique (hor.) bergamo elm (vertical) ash madeira (vertical)
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

KH 345 KH 345 KH 314

mountain robinia mountain robinia textured oak slate

Recommended plinth: Recommended plinth: Recommended plinth:

H 223h MP H 309h MP H 310h MP

textured oak barrique bergamo elm ash madeira

Surround accessories: Surround accessories: Surround accessories:

H ... MP H 223 H 309 H 310

MP = Extra charge textured oak barrique bergamo elm ash madeira

1.32 1/2022
TOPOS-C | TOPOS-A
CONTINO | AVANCE

Programme number 769 | 469

Price group C5 | A5

Front veneered in oak, ash, walnut or elm. Styles in striking brushed

wood texture with seemingly transparent colouring. A choice of stag-
gered planked wood emphasises the natural quality of the wood.
Solid wood edges applied all round. Surface sealed with environment-
friendly PUR-lacquer.

Front thickness 18,8 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

H 312h H 313h H 316h

walnut (horizontal) textured oak copper (hor.) textured oak marsh (hor.)
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

KH 240 KH 368 K 286

Solid oak framed glass door. walnut le midi tennessee walnut black slate
See glass type on page 10.13.
Recommended plinth: Recommended plinth: Recommended plinth:

H 312h MP H 313h MP H 316h MP

walnut textured oak copper textured oak marsh

Surround accessories: Surround accessories: Surround accessories:

H 312 H 313 H 316

walnut textured oak copper textured oak marsh

H ... MP
MP = Extra charge

1/2022 1.33
IOS-M-C
CONTINO

Programme number 726

Price group C6

High quality glass front in framed glass combination. Matt glass

front of toughened white glass (ESG). Reverse side foil covered back-
ing. Solid metal edges all round, protecting the glass edge. The fluid
chamfer transition between the glass and metal edge is a classic de-
sign characteristic. The glass is opaque lacquered on the reverse side.

Front thickness 21,0 mm.

High quality opaque glass is used to achieve the highest degree of

colour consistency. Through the physical light refraction of the glass,
the light colour appears marginally darker. You can find some exam-
ples on our website: http://leicht.com/strukturmuster.

In addition, the matt glass surface produces a different colour effect

against the surround accessories of the same colour.

Delivery Front colours

Door width max. 60 cm
The following items
are excluded:

• Diagonal corner units 135°

• Corner units: OE 60 ..., OE 65 ...

• 90° staggered corner blenders GM 032 GM 100 GM 103

magnolia arctic merino
• Housing units for fridge-freezer
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

• All handle solutions with metal

blenders (see page 10.04) K 032 K 100 K 103

magnolia arctic merino
• Dishwasher front GFV…
Recommended plinth: Recommended plinth: Recommended plinth:

K 032 FS 032 MP K 100 FS 100 MP K 103 FS 103 MP

magnolia magnolia arctic arctic merino merino

Surround accessories: Surround accessories: Surround accessories:

FS 032 FS 100 FS 103

magnolia arctic merino
Edging

405 277
stainless steel black

GM 120 GM 130 GM 134

frosty white mohair olive grey
It is essential to state
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:
edge type on order!

K 120 K 130 K 134

frosty white mohair olive grey

Recommended plinth: Recommended plinth: Recommended plinth:

K 120 FS 120 MP K 130 FS 130 MP K 134 FS 134 MP

frosty white frosty white mohair mohair olive grey olive grey

Surround accessories: Surround accessories: Surround accessories:

FS ... MP FS 120 FS 130 FS 134

MP = Extra charge frosty white mohair olive grey

1.34 1/2022
IOS-M-C

GM 136 GM 137 GM 138 GM 139 GM 273

sand grey taupe grey fossil grey lava platinum
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 136 K 137 K 138 K 139 K 273

sand grey taupe grey fossil grey lava platinum

Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth:

K 136 FS 136 MP FS 137 MP K 138 FS 138 MP K 139 FS 139 MP K 273 FS 273 MP

sand grey sand grey taupe grey fossil grey fossil grey lava lava platinum platinum

Surround accessories: Surround accessories: Surround accessories: Surround accessories: Surround accessories:

FS 136 FS 137 FS 138 FS 139 FS 273

sand grey taupe grey fossil grey lava platinum

GM 277 GM 279 GM 282 GM 284 GM 286

black midnight blue alpine grey carbon grey black slate
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 286 K 279 K 282 K 284 K 286

black slate midnight blue alpine grey carbon grey black slate

Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth:

FS 277 MP FS 279 MP K 282 FS 282 MP K 284 FS 284 MP K 286 FS 286 MP

black midnight blue alpine grey alpine grey carbon grey carbon grey black slate black slate

Surround accessories: Surround accessories: Surround accessories: Surround accessories: Surround accessories:

FS 277 FS 279 FS 282 FS 284 FS 286

black midnight blue alpine grey carbon grey black slate

RAL / NCS Special lacquering from the colour systems RAL “Classic” or “Design” (ex-
cluding metallic and luminescent paints) / NCS are available in matching
surface texture at extra charge per order and colour.

The extra charge will be calculated independently from the order volume,
initially for cupboards and accessory components. If several RAL-/NCS-colours
are requested with the same order, then the extra charge has to be taken into
consideration for each colour.
GM RAL Carcase edges can be taken from the ranges in chapter 11.
RAL-/NCS-colours
Normal delivery time is extended by 5 working days.
Recommended carcase edge:

Extra charge-type: MPRAL 423 HLP

K 273 K 284 Minimal colour deviations from the sample colours of the RAL-colour cards
platinum carbon grey cannot be excluded as older sample cards experience change through light
RAL / NCS
Recommended plinth:
influence.

FS RAL MP
RAL / NCS
RAL-/NCS-colours

Surround accessories:

FS RAL
RAL-/NCS-colours

1/2022 1.35
IOS-C
CONTINO

Programme number 728

Price group C6

High quality glass front in framed glass combination. High gloss front
of toughened white glass (ESG). Reverse side foil covered backing.
Solid metal edges all round, protecting the glass edge. The fluid
chamfer transition between the glass and metal edge is a classic de-
sign characteristic. The glass is opaque lacquered on the reverse side.

Front thickness 21,0 mm.

High quality opaque glass is used to achieve the highest degree of

colour consistency. Through the physical light refraction of the glass,
the light colour appears marginally darker. You can find some exam-
ples on our website: http://leicht.com/strukturmuster.

The assigned surround accessories with the same colour code will by
nature show slight colour variation.

Delivery Front colours

Door width max. 60 cm
The following items
are excluded:

• Diagonal corner units 135°

• Corner units: OE 60 ..., OE 65 ...

• 90° staggered corner blenders GL 032 GL 100 GL 103

magnolia arctic merino
• Housing units for fridge-freezer
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

• All handle solutions with metal

blenders (see page 10.04) K 032 K 100 K 103

magnolia arctic merino
• Dishwasher front GFV…
Recommended plinth: Recommended plinth: Recommended plinth:

KG 032 FG 032 MP KG 100 FG 100 MP KG 103 FG 103 MP

magnolia magnolia arctic arctic merino merino

Surround accessories: Surround accessories: Surround accessories:

FG 032 FG 100 FG 103

magnolia arctic merino
Edging

405 277
stainless steel black

GL 120 GL 130 GL 134

frosty white mohair olive grey
It is essential to state
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:
edge type on order!

K 120 K 130 K 134

frosty white mohair olive grey

Recommended plinth: Recommended plinth: Recommended plinth:

KG 120 FG 120 MP KG 130 FG 130 MP KG 134 FG 134 MP

frosty white frosty white mohair mohair olive grey olive grey

Surround accessories: Surround accessories: Surround accessories:

FG ... MP FG 120 FG 130 FG 134

MP = Extra charge frosty white mohair olive grey

1.36 1/2022
IOS-C
* Front colour based on Gaggenau appliance colours.

GL 136 GL 137 GL 138 GL 139 GL 273

sand grey taupe grey fossil grey lava platinum
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 136 K 137 K 138 K 139 K 273

sand grey taupe grey fossil grey lava platinum

Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth:

KG 136 FG 136 MP FG 137 MP K 138 FG 138 MP KG 139 FG 139 MP KG 273 FG 273 MP

sand grey sand grey taupe grey fossil grey fossil grey lava lava platinum platinum

Surround accessories: Surround accessories: Surround accessories: Surround accessories: Surround accessories:

FG 136 FG 137 FG 138 FG 139 FG 273

sand grey taupe grey fossil grey lava platinum

GL 277 GL 279 GL 282 GL 284 GL 286

black midnight blue alpine grey carbon grey black slate
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 286 K 279 K 282 K 284 K 286

black slate midnight blue alpine grey carbon grey black slate

Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth:

KG 277 FG 277 MP FG 279 MP KG 282 FG 282 MP KG 284 FG 284 MP K 286 FG 286 MP

black black midnight blue alpine grey alpine grey carbon grey carbon grey black slate black slate

Surround accessories: Surround accessories: Surround accessories: Surround accessories: Surround accessories:

FG 277 FG 279 FG 282 FG 284 FG 286

black midnight blue alpine grey carbon grey black slate

RAL / NCS

GL 292 * GL 293 * GL 294 * GL RAL MPRAL

silver metal anthracite RAL-/NCS-colours 423 HLP
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 273 K 282 K 284 K 273 K 284

platinum alpine grey carbon grey platinum carbon grey
RAL / NCS
Recommended plinth: Recommended plinth: Recommended plinth: Recommended plinth:

FG 292 MP FG 293 MP FG 294 MP FG RAL MP

silver metal anthracite
RAL / NCS
RAL-/NCS-colours

Surround accessories: Surround accessories: Surround accessories: Surround accessories:

FG 292 FG 293 FG 294 FG RAL

silver metal anthracite RAL-/NCS-colours

1/2022 1.37
LAIKA-C | LAIKA-A
CONTINO | AVANCE

Programme number 710 | 410

Price group C6 | A6

Front in special metallic design with an iridescent shadow-like effect.

The special combination of surface finish and paint colours creates
an individual character of the surface on each front. Reverse side is
colour matching.

Front thickness 19,5 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

The manual manufacturing process lends every single front an in-

dividual and unique quality. The different structure images of the
individual fronts give each kitchen an unmistakable appearance.
You can find some examples on our website:

http://leicht.com/strukturmuster.

Glass door Front colours

Frame in front colour. MC 093 MC 094

copper shadow lava shadow
See glass type on page 10.13. Recommended carcase edge: Recommended carcase edge:

K 137 K 282
taupe grey alpine grey

Recommended plinth: Recommended plinth:

MC 093 MC 094
copper shadow lava shadow

Surround accessories: Surround accessories:

MC 093 MC 094
copper shadow lava shadow

1.38 1/2022
TERMA-C | TERMA-A
CONTINO | AVANCE

Programme number 776 | 476

Price group C6 | A6

Wood veneer front with thermally treated veneer on both sides.

The controlled treatment of the raw wood which utilises heat and
steam creates the unique dark hue of the veneer with beautiful con-
trasts and warm colour shades. The simple, partially veneered figuring
is effectively supported by the vertical graining. All round veneer edge,
natural matt surface sealing with a water based PUR-lacquer system.

Front thickness 19,0 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

Glass door Front colours

Frame in front colour. HI 360v

maraval chestnut
See glass type on page 10.13. Recommended carcase edge:

KH 241
black walnut

Recommended plinth:

H 360h MP
maraval chestnut

Surround accessories:

H 360
maraval chestnut

H ... MP
MP = Extra charge

1/2022 1.39
BOSSA-C
CONTINO

Programme number 744

Price group C7

Wood veneered front with 2 mm deep embossed channels in

vertical direction. The grid width is 12.5 mm. The reverse side has
a matching embossed line. Solid wood applied edges all round.
Environmentally friendly water based PUR-lacquer sealing.

Front thickness 18,5 mm.

Surround accessories are smooth veneered and have the same

surface characteristics as the front.

Front colours

HI 350v HI 352v
alpine oak lined walnut lined
Recommended carcase edge: Recommended carcase edge:

KH 234 KH 240
highland oak walnut le midi

Recommended plinth: Recommended plinth:

H 750h MP H 752h MP
alpine oak smooth walnut smooth

Surround accessories: Surround accessories:

H 750 H 752
alpine oak smooth walnut smooth

H ... MP
MP = Extra charge

1.40 1/2022
BOSSA-C
Planning tips: Width alterations
Alterations to cupboard widths are also possible with the BOSSA alteration grid
programme, but only in grid widths of 2.5 cm. x 2,5 2,5

Island end panels

Island end panels CTWI 6 from the BOSSA programmes can only be 5,9
ordered with a grid width of 2.5 cm due to their lined embossing.
When planning, please note the total width of the carcase accord-
ing to the following table.
2,5
Deep carcases (cm) Panel depth (cm)
K W
90 94,2
92,5 96,7
W
K
95 99,2 (K + 4,2)

97,5 101,7
100 104,2
102,5 106,7
0,2
105 109,2
107,5 111,7 1,9

110 114,2
112,5 116,7
115 119,2 (max.)

However, end panels CTW 6, at the end of a cupboard run, can be

ordered to millimetre depth, as usual.

Niche- and panel wall coverings

Wall claddings with BOSSA-front panels can be ordered via its 0,25
own niche panel type WVF… L for corner wall cladding, the
14,5
WVF PAE 15 L corner element with a 15 x 15 cm leg length is
available. BOSSA wall coverings can be mounted with the new pan-
el wall fixing WV AUFH. Please note, when determining the size of
the panels, the installation gap of 0.5 cm between wall and panel
must be observed.
12,4

Please note the maximum niche panel width of 119.5 cm. In order 14,5
to maintain the front grid, the panels should preferably be installed
in front width and with vertical joints of 0.5 cm width.

WVF PAE 15 L

0,5

1/2022 1.41
CONCRETE-C | CONCRETE-A
CONTINO | AVANCE

Programme number 793 | 493

Price group C7 | A7

Concrete front on high quality MDF-panel. Facing side with fine

concrete cover with spatula technique, sealed with matt lacquer.
Reverse side satin-finish lacquered, matching plain colours. All round
edging with sprayed concrete appearance, irregularly chamfered.

Front thickness 19,5 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

The hand crafted production process gives each front its uniquely
individual character. The varied texture pattern of concrete has been
deliberately transferred into the kitchen. You can find some exam-
ples on our website: http://leicht.com/strukturmuster.

Glass door Front colours

FB 188 FB 189 FB 191

dakar manhattan le havre
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 120 K 282 K 139

Frame in front colour. frosty white alpine grey lava

See glass type on page 10.13. Recommended plinth: Recommended plinth: Recommended plinth:

FF 488 MP FF 489 MP FF 491 MP

dakar manhattan le havre

Surround accessories: Surround accessories: Surround accessories:

FF 488 FB 188 FF 489 FB 189 FF 491 FB 191

dakar dakar manhattan manhattan le havre le havre

FB 192
brasilia
Recommended carcase edge:

K 284
carbon grey

Recommended plinth:

FF 492 MP
brasilia

Surround accessories:

FF ... MP FF 492 FB 192

MP = Extra charge brasilia brasilia

1.42 1/2022
STEEL-C | STEEL-A
CONTINO | AVANCE

Programme number 791 | 491

Price group C7 | A7

Front with real metal coating on a high quality MDF-panel. Special

lacquer with powdered iron content on front and edges. Reverse
side with matching textured plain lacquer. Front and back edges all
round, slightly rounded.

Front thickness 19,5 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

The colouring of the iron encased in the lacquer is produced by a

special oxidation process. This process lends each individual front a
unique colour and picture texture. You can find some examples on
our website: http://leicht.com/strukturmuster.

The genuine metal surface is further distinguished by its magnetic

effect.

Glass door Front colours

Frame in front colour. MF 297 MF 298

corten ferro
See glass type on page 10.13. Recommended carcase edge: Recommended carcase edge:

K 139 K 139
lava lava

Recommended plinth: Recommended plinth:

FF 497 MP FF 498 MP
corten ferro

Surround accessories: Surround accessories:

FF 497 MF 297 FF 498 MF 298

corten corten ferro ferro

FF ... MP
MP = Extra charge

1/2022 1.43
STONE-C | STONE-A
CONTINO | AVANCE

Programme number 794 | 494

Price group C7 | A7

Stone-look front on high quality MDF support panel. Front with

hand-crafted lacquer application, enhanced with special compo-
nents. The reverse side has textured lacquer, matching the colour of
the front. Surrounding edges feature irregular bevel.

Front thickness 19,5 mm.

On AVANCE, the edges in the access area are chamfered towards

the rear.

The manual manufacturing process lends every single front an in-

dividual and unique quality. The different structure images of the
individual fronts give each kitchen an unmistakable appearance.
You can find some examples on our website:

http://leicht.com/strukturmuster.

Glass door Front colours

Frame in front colour. FB 148 FB 149

cotta fossena
See glass type on page 10.13. Recommended carcase edge: Recommended carcase edge:

K 130 K 282
mohair alpine grey

Recommended plinth: Recommended plinth:

FF 448 MP FF 449 MP
cotta fossena

Surround accessories: Surround accessories:

FF 448 FB 148 FF 449 FB 149

cotta cotta fossena fossena

FF ... MP
MP = Extra charge

1.44 1/2022
ALURO-C
CONTINO

Programme number 784

Price group C8

Front aluminium coated both sides, 0.8 mm thick with anodized

colour finish. Support panel 18 mm chipboard. All round edging
with aluminium edge, bevelled all round.

Front thickness 19,6 mm (AL 167v = 20,0 mm).

Front colours

AL 167v AL 168v AL 169v

oxid silver oxid bronze oxid titan
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 273 K 137 K 139

platinum taupe grey lava

Recommended plinth: Recommended plinth: Recommended plinth:

ME 467 ME 468 ME 469

oxid silver oxid bronze oxid titan

Surround accessories: Surround accessories: Surround accessories:

AL 167 ME 467 AL 168 ME 468 AL 169 ME 469

oxid silver oxid silver oxid bronze oxid bronze oxid titan oxid titan

ME ... MP
MP = Extra charge

1/2022 1.45
VALAIS-C
CONTINO

Programme number 783

Price group C8

An oak veneered front with different plank widths and visibly stag-
gered plank thicknesses, horizontally arranged. Front staggered
planks. Reverse side smooth. Surrounding solid wood edges. The
vertical edges are cross-grained wood with an environmentally
friendly PUR-lacquer water based seal.

Front thickness 20,4 mm.

Every single front is uniquely crafted. The horizontal plank arrange-

ment is irregular – with staggered plank alignment between cup-
boards. Maximum front height 153 cm.

The surround accessories H 435 alpine oak, are smooth veneered

and show a striking grain with staggered joints.

Front colours

H 335h
alpine natural oak
Recommended carcase edge:

KH 234
highland oak

Recommended plinth:

H 435h MP
alpine natural oak

Surround accessories:

H 335 / H 435
alpine natural oak

H ... MP
MP = Extra charge

1.46 1/2022
KERA-C | KERA-A
CONTINO | AVANCE

Programme number 786 | 486

Price group C8 +50% | A7 +60%

Ceramic front with ceramic edge surround of the same design. The
support panel is 16 mm thick, melamine coated chipboard, bonded
with approx. 3.5 mm thick ceramic. The front edges are covered with
original ceramic strips overleaf and are bevelled along the edges.
Reverse side with colour matching melamine coating.
The front material has a grained pattern within the respective cup-
board. Available only as floor unit.
Front thickness 20,0 mm.

You can find pictures of the complete colour boards on our website:
http://leicht.com/rocca-kera.de

Front colours

CI 540 CI 541 CI 542

pamir marès cordillera
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 284 K 120 K 282

carbon grey frosty white alpine grey

Recommended plinth: Recommended plinth: Recommended plinth:

FF 284 MP FF 741 MP FF 742 MP

carbon grey marès cordillera

Surround accessories: Surround accessories: Surround accessories:

FF 284 FF 741 FF 742

carbon grey marès cordillera

CI 544 CI 545
nasca iguazu
Recommended carcase edge: Recommended carcase edge:

K 139 K 284
lava carbon grey

Recommended plinth: Recommended plinth:

FF 744 MP FF 745 MP
nasca iguazu

Surround accessories: Surround accessories:

FF ... MP FF 744 FF 745

MP = Extra charge nasca iguazu

1/2022 1.47
KERA-C
Article approval CARCASE LINE 73 CTEE11573 1248 CTEESP10573 1187 CT5080Z2IS 1410
CT1573 555 CTEE12573 1326 CTEESP11073 1187 CT6080Z2IS 1460
CT2073 555 CTEE11573D 1544 CTEESP11573 1187 CT8080Z2IS 2217
CT3073 555 CTEE11073LM 2037 CTEESP12573 1265 CT9080Z2IS 2328
CT4073 596 CTEE11573LM 2037 CT3073ZWH 1005 CT10080Z2IS 2459
CT4573 614 CTEE12573LM 2145 CT4073ZWH 1124 CT12080Z2IS 2567
CT5073 638 CTH6073Z 882 CT4573ZWH 1152 CT3080S2Z 1293
CT6073 687 CTH6173Z 909 CT5073ZWH 1185 CT4080S2Z 1352
CT8073 965 CTH7673Z 939 CT6073ZWH 1268 CT4580S2Z 1377
CT9073 1001 CTH6073 408 CTW57358 546 CT5080S2Z 1410
CT10073 1031 CTH7673 467 CTW57358Z2 665 CT6080S2Z 1460
CT12073 1098 CTH9173 719 CTW57368 660 CT8080S2Z 2217
CT3073ZIZ 1016 CTK6073Z2 1302 CTW57368Z2 782 CT9080S2Z 2328
CT4073ZIZ 1079 CTK8073Z2 1734 CTWI573 788 CT10080S2Z 2459
CT4573ZIZ 1101 CTK9073Z2 1814 CTWI573Z2 908 CT12080S2Z 2567
CT5073ZIZ 1128 CTK10073Z2 1850 CTW57358K45 546 CT1580H 725
CT6073ZIZ 1188 CTK12073Z2 1880 CTW57358K45Z2 665 CT2080H 725
CT3073ZIS2 1127 CTK6073S2Z 1317 CTW57368K45 660 CT3080H 725
CT4073ZIS2 1188 CTK8073S2Z 1952 CTW57368K45Z2 782 CT3080ZBR 1337
CT4573ZIS2 1212 CTK9073S2Z 2048 CTWI573K45 788 CT3080ZISF 1214
CT5073ZIS2 1242 CTK10073S2Z 2156 CTWI573K45Z2 908 CT3080ZIS3K 1554
CT6073ZIS2 1302 CTK12073S2Z 2249 CTP2073 131 CT3080N 669
CT3073Z2 1037 ANBLBOCI 316 CTP2073Z2 200 CT4080N 696
CT4073Z2 1098 CT8073BSZTV 1913 CTPE73 260 CT4580N 708
CT4573Z2 1125 CT9073BSZTV 2118 CTPE73Z2 330 CT5080N 726
CT5073Z2 1151 CT10073BSZTV 2223 CTPEW73 276 CT6080N 782
CT6073Z2 1211 CT12073BSZTV 2318 CTPEW73Z2 348 CTEE10580 1484
CT8073Z2 1649 CT8073Z2TV 1737 CTEE11080 1484
CT9073Z2 1724 CT9073Z2TV 1814 CARCASE LINE 80 CTEE11580 1484
CT10073Z2 1764 CT10073Z2TV 1853 CT1580 663 CTEE12580 1562
CT12073Z2 1790 CT12073Z2TV 1880 CT2080 663 CTEE11580D 1832
CT3073Z2IS 1089 CGFV4573M 410 CT3080 663 CTEE11080LM 2426
CT4073Z2IS 1134 CGFV6073M 449 CT4080 705 CTEE11580LM 2426
CT4573Z2IS 1158 CTSP4573 608 CT4580 734 CTEE12580LM 2534
CT5073Z2IS 1188 CTSP5073 629 CT5080 761 CTH6080Z 1052
CT6073Z2IS 1227 CTSP6073 683 CT6080 818 CTH6180Z 1085
CT8073Z2IS 1863 CTSP8073 953 CT8080 1148 CTH7680Z 1113
CT9073Z2IS 1956 CTSP9073 989 CT9080 1190 CTH9080Z 1422
CT10073Z2IS 2067 CTSP10073 1014 CT10080 1227 CTH6080 486
CT12073Z2IS 2159 CTSP12073 1071 CT12080 1307 CTH7680 557
CT3073S2Z 1089 CTSP5073ZW 1103 CT3080ZIZ 1208 CTH9180 857
CT4073S2Z 1134 CTSP6073ZW 1155 CT4080ZIZ 1281 CTK6080Z2 1550
CT4573S2Z 1158 CTSP6073ZBS 1113 CT4580ZIZ 1310 CTK8080Z2 2064
CT5073S2Z 1188 CTSP5073Z2 1497 CT5080ZIZ 1344 CTK9080Z2 2159
CT6073S2Z 1227 CTSP6073Z2 1548 CT6080ZIZ 1410 CTK10080Z2 2202
CT8073S2Z 1863 CTSP8073Z2 2060 CT3080ZIS2 1341 CTK12080Z2 2238
CT9073S2Z 1956 CTSP9073Z2 2178 CT4080ZIS2 1410 CTK6080S2Z 1566
CT10073S2Z 2067 CTSP10073Z2 2222 CT4580ZIS2 1445 CTK8080S2Z 2324
CT12073S2Z 2159 CTSP12073Z2 2249 CT5080ZIS2 1475 CTK9080S2Z 2436
CT1573H 609 CTSP5073Z2W 1532 CT6080ZIS2 1550 CTK10080S2Z 2562
CT2073H 609 CTSP6073Z2W 1578 CT3080Z2 1233 CTK12080S2Z 2676
CT3073H 609 CTSP8073Z2W 2171 CT4080Z2 1305 ANBLBOCI 316
CT3073ZBR 1125 CTSP9073Z2W 2291 CT4580Z2 1337 CT8080BSZTV 2298
CT3073ZISF 1020 CTSP10073Z2W 2334 CT5080Z2 1370 CT9080BSZTV 2414
CT3073ZIS2K 1197 CTSP12073Z2W 2358 CT6080Z2 1443 CT10080BSZTV 2541
CT3073N 561 CTQ6073 803 CT8080Z2 1958 CT12080BSZTV 2652
CT4073N 587 CTSPA8073TZW 1508 CT9080Z2 2051 CT8080Z2TV 2048
CT4573N 597 CTSPQ9073TZW 1545 CT10080Z2 2099 CT9080Z2TV 2141
CT5073N 609 CTSPA9073TZW 1565 CT12080Z2 2130 CT10080Z2TV 2187
CT6073N 659 CTSPQ10073TZW 1601 CT3080Z2IS 1293 CT12080Z2TV 2220
CTEE10573 1248 CTSPA9073TZBS 1523 CT4080Z2IS 1352 CGFV4580M 488
CTEE11073 1248 CTSPQ10073TZBS 1559 CT4580Z2IS 1377 CGFV6080M 531

1.48 1/2022
KERA-C
Article approval CTSP4580 723 CT4586 792 CTH6086Z 1136 CT6086ZISWH 1758
CTSP5080 752 CT5086 821 CTH6186Z 1172 CTW58658 695
CTSP6080 809 CT6086 882 CTH7686Z 1202 CTW58658Z2 822
CTSP8080 1133 CT8086 1239 CTH9086Z 1536 CTW58668 842
CTSP9080 1175 CT9086 1284 CTK6086Z2 1674 CTW58668Z2 969
CTSP10080 1206 CT10086 1325 CTK8086Z2 2229 CTWI586 1005
CTSP12080 1275 CT12086 1410 CTK9086Z2 2331 CTWI586Z2 1134
CTSP5080ZW 1311 CT3086ZIZ 1305 CTK10086Z2 2379 CTW58058K45 645
CTSP6080ZW 1376 CT4086ZIZ 1383 CTK12086Z2 2417 CTW58058K45Z2 765
CTSP6080ZBS 1326 CT4586ZIZ 1415 CTK6086SZ2 1737 CTW58068K45 782
CTSP5080Z2 1545 CT5086ZIZ 1452 CTK8086SZ2 2576 CTW58068K45Z2 902
CTSP6080Z2 1610 CT6086ZIZ 1523 CTK9086SZ2 2700 CTWI580K45 932
CTSP8080Z2 2241 CT3086ZIS2 1449 CTK10086SZ2 2838 CTWI580K45Z2 1053
CTSP9080Z2 2360 CT4086ZIS2 1523 CTK12086SZ2 2960 CTP2086 171
CTSP10080Z2 2411 CT4586ZIS2 1559 ANBLBOCI 316 CTP2086Z2 248
CTSP12080Z2 2444 CT5086ZIS2 1593 CT8086BZ2TV 2550 CTPE86 332
CTSP5080Z2W 1821 CT6086ZIS2 1674 CT9086BZ2TV 2676 CTPE86Z2 405
CTSP6080Z2W 1877 CT3086Z2 1332 CT10086BZ2TV 2816 CTPEW86 356
CTSP8080Z2W 2583 CT4086Z2 1409 CT12086BZ2TV 2934 CTPEW86Z2 435
CTSP9080Z2W 2724 CT4586Z2 1445 CT8086Z2TV 2211
CTSP10080Z2W 2777 CT5086Z2 1479 CT9086Z2TV 2312
CTSP12080Z2W 2807 CT6086Z2 1557 CT10086Z2TV 2363
CTQ6080 954 CT8086Z2 2114 CT12086Z2TV 2397
CTSPA8080TZW 1796 CT9086Z2 2216 CGFV4586M 527
CTSPQ9080TZW 1839 CT10086Z2 2267 CGFV6086M 573
CTSPA9080TZW 1863 CT12086Z2 2300 CTSP4586 780
CTSPQ10080TZW 1907 CT3086SZ2 1445 CTSP5086 813
CTSPA9080TZBS 1812 CT4086SZ2 1506 CTSP6086 873
CTSPQ10080TZBS 1856 CT4586SZ2 1535 CTSP8086 1223
CTEESP10580 1409 CT5086SZ2 1568 CTSP9086 1269
CTEESP11080 1409 CT6086SZ2 1623 CTSP10086 1304
CTEESP11580 1409 CT8086SZ2 2462 CTSP12086 1377
CTEESP12580 1487 CT9086SZ2 2583 CTSP5086ZW 1416
CT3080ZISWH 1365 CT10086SZ2 2727 CTSP6086ZW 1487
CT4080ZISWH 1443 CT12086SZ2 2841 CTSP6086ZBS 1431
CT4580ZISWH 1478 CT3086Z2IS 1398 CTSP5086Z2 1670
CT5080ZISWH 1518 CT4086Z2IS 1460 CTSP6086Z2 1739
CT6080ZISWH 1628 CT4586Z2IS 1488 CTSP8086Z2 2421
CTW58058 645 CT5086Z2IS 1523 CTSP9086Z2 2549
CTW58058Z2 765 CT6086Z2IS 1577 CTSP10086Z2 2603
CTW58068 782 CT8086Z2IS 2393 CTSP12086Z2 2639
CTW58068Z2 902 CT9086Z2IS 2514 CTSP5086Z2W 1967
CTWI580 932 CT10086Z2IS 2655 CTSP6086Z2W 2027
CTWI580Z2 1053 CT12086Z2IS 2772 CTSP8086Z2W 2789
CTW58058K45 645 CT1586H 788 CTSP9086Z2W 2940
CTW58058K45Z2 765 CT2086H 789 CTSP10086Z2W 2999
CTW58068K45 782 CT3086H 791 CTSP12086Z2W 3030
CTW58068K45Z2 902 CT3086ZBR 1445 CTQ6086 1031
CTWI580K45 932 CT3086ZISF 1311 CTSPA8086TZW 1941
CTWI580K45Z2 1053 CT3086ZIS3K 1679 CTSPQ9086TZW 1988
CTP2080 158 CT3086N 722 CTSPA9086TZW 2012
CTP2080Z2 230 CT4086N 752 CTSPQ10086TZW 2058
CTPE80 308 CT4586N 764 CTSPA9086TZBS 1956
CTPE80Z2 375 CT5086N 783 CTSPQ10086TZBS 2004
CTPEW80 329 CT6086N 843 CTEESP10586 1521
CTPEW80Z2 402 CTEE10586 1601 CTEESP11086 1521
CTEE11086 1601 CTEESP11586 1521
CARCASE LINE 86 CTEE11586 1601 CTEESP12586 1599
CT1586 716 CTEE12586 1679 CT3086ZISWH 1473
CT2086 716 CTEE11086LM 2619 CT4086ZISWH 1557
CT3086 716 CTEE11586LM 2619 CT4586ZISWH 1596
CT4086 762 CTEE12586LM 2727 CT5086ZISWH 1640

1/2022 1.49
KERA-C
Approved CARCASE LINE 73
Dishwashers Front weight approx. Possible appliances:
8,5 kg MIELE all appliances with retrofit set
AEG all appliances
BSH all large capacity appliances
V-ZUG all appliances with replacement
spring only

CARCASE LINE 80
Front weight approx. Possible appliances:
9,3 kg MIELE all appliances with retrofit set
AEG all appliances
BSH all large capacity appliances
V-ZUG all appliances with replacement
spring only

CARCASE LINE 86
Front weight approx. Possible appliances:
10,1 kg MIELE all appliances with retrofit set
AEG all appliances with retrofit set
BSH all large capacity appliances with
retro set

1.50 1/2022
KERA-A
Article approval CARCASE LINE 80 AT8080S3Z 2936 ATK9080SZ2 3019 AT3080SZWH 1446
AT3080S 1045 AT9080S3Z 3045 ATK10080SZ2 3176 AT4080SZWH 1530
AT4080S 1098 AT10080S3Z 3206 ATK12080SZ2 3339 AT4580SZWH 1571
AT4580S 1118 AT12080S3Z 3365 AT8080BZ2TV 2802 AT5080SZWH 1613
AT5080S 1146 AT3080SH 1085 AT9080BZ2TV 2912 AT6080SZWH 1720
AT6080S 1202 AT3080SZBR 1517 AT10080BZ2TV 3074 ATW58058S 795
AT8080SG 1842 AT3080SZISF 1627 AT12080BZ2TV 3234 ATW58058SZ2 918
AT9080SG 1896 AT3080SZIS2K 1786 AGFV4580SM 614 ATW58068S 1021
AT10080SG 1949 AT3080N 968 AGFV6080SM 683 ATW58068SZ2 1142
AT12080SG 2054 AT4080N 1010 ATSP4580B 920 ATWI580S 1227
AT3080SZIZ 1534 AT4580N 1022 ATSP5080B 942 ATWI580SZ2 1350
AT4080SZIZ 1560 AT5080N 1064 ATSP6080B 995 ATW58058K45S 795
AT4580SZIZ 1589 AT6080N 1104 ATSP8080BG 1459 ATW58058K45SZ2 918
AT5080SZIZ 1614 ATEE10580S 2000 ATSP9080BG 1515 ATW58068K45S 1021
AT6080SZIZ 1677 ATEE11080S 2000 ATSP10080BG 1568 ATW58068K45SZ2 1142
AT8080SZIZ 2144 ATEE11580S 2000 ATSP12080BG 1675 ATWI580K45S 1227
AT9080SZIZ 2302 ATEE12580S 2078 ATSP5080BZW 1398 ATWI580K45SZ2 1350
AT10080SZIZ 2453 ATEE11580SD 2326 ATSP6080BZW 1453 ATP2080S 254
AT3080SZIS2 1619 ATEE11080SLM 2910 ATSP8080BZW 1920 ATP2080SZ2 325
AT4080SZIS2 1670 ATEE11580SLM 2910 ATSP9080BZW 2032 ATPE80S 432
AT4580SZIS2 1698 ATEE12580SLM 3018 ATSP10080BZW 2144 ATPE80SZ2 744
AT5080SZIS2 1730 ATH6080Z 1114 ATSP6080BZBS 1502 ATPEW80S 469
AT6080SZIS2 1797 ATH6180Z 1174 ATSP8080BZ2 2702 ATPEW80SZ2 786
AT3080SZ2 1818 ATH7680Z 1210 ATSP9080BZ2 2810
AT4080SZ2 1872 ATH9080Z 1504 ATSP10080BZ2 2971
AT4580SZ2 1906 ATH6080S 782 ATSP12080BZ2 3133
AT5080SZ2 1930 ATH6080B 534 ATQ6080S 1347
AT6080SZ2 1998 ATH7680B 602 ATSPA8080BTZW 1968
AT8080SZ2 2800 ATH9180B 926 ATSPQ9080BTZW 2022
AT9080SZ2 2909 ATK6080BZIZ 1691 ATSPA9080BTZW 2062
AT10080SZ2 3070 ATK6080BZ2 1907 ATSPQ10080BTZW 2115
AT12080SZ2 3230 ATK8080BZ2 2707 ATSPA9080BTBS 2112
AT3080S3Z 1928 ATK9080BZ2 2818 ATSPQ10080BTBS 2166
AT4080S3Z 1982 ATK10080BZ2 2976 ATEESP10580B 1798
AT4580S3Z 2018 ATK12080BZ2 3138 ATEESP11080B 1798
AT5080S3Z 2045 ATK6080SZ2 2109 ATEESP11580B 1798
AT6080S3Z 2122 ATK8080SZ2 2907 ATEESP12580B 1876

Approved CARCASE LINE 80

Dishwashers Front weight approx. Possible appliances:
9,3 kg MIELE all appliances with retrofit set
AEG all appliances
BSH all large capacity appliances
V-ZUG all appliances with replacement
spring only

1/2022 1.51
ROCCA-C
A composite front from the natural stone programme. The support
panel is an 8 mm thick, melamine coated CDF-panel bonded with
approx. 12 mm thick natural stone. The front edges are covered
overleaf with original natural stone and bevelled along the edges.
The front material has a grained pattern within the respective cup-
board. Available only as floor unit with pullouts.
Front thickness 20,0 mm.

You can find pictures of the complete colour boards on our website:
http://leicht.com/rocca-kera.de

Front colours
ROCCA-01-C CONTINO
Programme number 701
Price group C8 +60%

GI 685
nero san marcos satined
Recommended carcase edge:

K 286
black slate

Recommended plinth:

FF 785 MP
nero san marcos
satined
Surround accessories:

FF 785
nero san marcos
satined

ROCCA-02-C CONTINO
Programme number 702
Price group C8 +70%

GI 686
steel gray satined
Recommended carcase edge:

K 284
carbon grey

Recommended plinth:

FF 786 MP
steel gray satined

Surround accessories:

FF ... MP FF 786
MP = Extra charge steel gray satined

1.52 1/2022
ROCCA-C

ROCCA-03-C CONTINO
Programme number 703
Price group C8 +80%

GI 687
nero assoluto waterjet
Recommended carcase edge:

K 284
carbon grey

Recommended plinth:

FF 787 MP
nero assoluto
waterjet
Surround accessories:

FF 787
nero assoluto
waterjet

ROCCA-04-C CONTINO
Programme number 704
Price group C8 +100%

GI 689 GI 690 GI 691

negresco satined breccia imperiale satined black musk waterjet
Recommended carcase edge: Recommended carcase edge: Recommended carcase edge:

K 284 K 284 K 284

carbon grey carbon grey carbon grey

Recommended plinth: Recommended plinth: Recommended plinth:

FF 789 MP FF 790 MP FF 791 MP

negresco satined breccia imperiale black musk waterjet
satined
Surround accessories: Surround accessories: Surround accessories:

FF 789 FF 790 FF 791

negresco satined breccia imperiale black musk waterjet
satined

ROCCA-05-C CONTINO
Programme number 705
Price group C8 +110%

GI 683 GI 684
taj mahal sanded white fantasy sanded
Recommended carcase edge: Recommended carcase edge:

K 130 K 273
mohair platinum

Recommended plinth: Recommended plinth:

FF 783 MP FF 784 MP
taj mahal sanded white fantasy sanded

Surround accessories: Surround accessories:

FF ... MP FF 783 FF 784

MP = Extra charge taj mahal sanded white fantasy sanded

1/2022 1.53
ROCCA-C
Article approval

701

702

703

704

705

701

702

703

704

705
CARCASE LINE 73 CARCASE LINE 80
CT3073Z2 1106 1175 1244 1382 1451 CT3080Z2 1315 1397 1480 1644 1726
CT4073Z2 1171 1244 1318 1464 1537 CT4080Z2 1392 1479 1566 1740 1827
CT4573Z2 1200 1275 1350 1500 1575 CT4580Z2 1426 1515 1604 1782 1871
CT5073Z2 1227 1304 1381 1534 1611 CT5080Z2 1461 1552 1643 1826 1917
CT6073Z2 1291 1372 1453 1614 1695 CT6080Z2 1539 1635 1732 1924 2020
CT8073Z2 1758 1868 1978 2198 2308 CT8080Z2 2088 2219 2349 2610 2741
CT9073Z2 1838 1953 2068 2298 2413 CT9080Z2 2187 2324 2461 2734 2871
CT3073Z2IS 1162 1234 1307 1452 1525 CT3080Z2IS 1379 1465 1552 1724 1810
CT4073Z2IS 1210 1285 1361 1512 1588 CT4080Z2IS 1442 1532 1622 1802 1892
CT4573Z2IS 1235 1312 1390 1544 1621 CT4580Z2IS 1469 1561 1652 1836 1928
CT5073Z2IS 1267 1346 1426 1584 1663 CT5080Z2IS 1504 1598 1692 1880 1974
CT6073Z2IS 1309 1391 1472 1636 1718 CT6080Z2IS 1557 1654 1751 1946 2043
CT8073Z2IS 1987 2111 2236 2484 2608 CT8080Z2IS 2365 2513 2660 2956 3104
CT9073Z2IS 2086 2217 2347 2608 2738 CT9080Z2IS 2483 2638 2794 3104 3259
CT3073S2Z 1162 1234 1307 1452 1525 CT3080S2Z 1379 1465 1552 1724 1810
CT4073S2Z 1210 1285 1361 1512 1588 CT4080S2Z 1442 1532 1622 1802 1892
CT4573S2Z 1235 1312 1390 1544 1621 CT4580S2Z 1469 1561 1652 1836 1928
CT5073S2Z 1267 1346 1426 1584 1663 CT5080S2Z 1504 1598 1692 1880 1974
CT6073S2Z 1309 1391 1472 1636 1718 CT6080S2Z 1557 1654 1751 1946 2043
CT8073S2Z 1987 2111 2236 2484 2608 CT8080S2Z 2365 2513 2660 2956 3104
CT9073S2Z 2086 2217 2347 2608 2738 CT9080S2Z 2483 2638 2794 3104 3259
CTH6073 435 462 490 544 571 CTH6080Z 1122 1192 1262 1402 1472
CTH7673 498 529 560 622 653 CTH6180Z 1157 1229 1301 1446 1518
CTH6073Z 941 1000 1058 1176 1235 CTH7680Z 1187 1261 1336 1484 1558
CTH6173Z 970 1030 1091 1212 1273 CTH9080Z 1517 1612 1706 1896 1991
CTH7673Z 1002 1064 1127 1252 1315 CTH6080 518 551 583 648 680
CTK6073Z2 1389 1476 1562 1736 1823 CTH7680 594 631 668 742 779
CTK8073Z2 1850 1965 2081 2312 2428 CTK6080Z2 1653 1756 1859 2066 2169
CTK9073Z2 1934 2055 2176 2418 2539 CTK8080Z2 2202 2339 2477 2752 2890
CTK6073S2Z 1405 1493 1580 1756 1844 CTK9080Z2 2302 2446 2590 2878 3022
CTK8073S2Z 2082 2212 2342 2602 2732 CTK6080S2Z 1670 1775 1879 2088 2192
CTK9073S2Z 2184 2321 2457 2730 2867 CTK8080S2Z 2478 2633 2788 3098 3253
ANBLBOG 337 337 337 337 337 CTK9080S2Z 2598 2761 2923 3248 3410
CT8073BSZTV 2040 2168 2295 2550 2678 ANBLBOG 337 337 337 337 337
CT9073BSZTV 2259 2400 2542 2824 2965 CT8080BSZTV 2451 2604 2758 3064 3217
CT8073Z2TV 1853 1969 2084 2316 2432 CT9080BSZTV 2574 2735 2896 3218 3379
CT9073Z2TV 1934 2055 2176 2418 2539 CT8080Z2TV 2184 2321 2457 2730 2867
CGFV4573M 437 464 491 546 573 CT9080Z2TV 2283 2426 2569 2854 2997
CGFV6073M 478 508 538 598 628 CGFV4580M 520 553 585 650 683
CTSP5073Z2 1597 1697 1796 1996 2096 CGFV6080M 566 602 637 708 743
CTSP6073Z2 1651 1754 1858 2064 2167 CTSP5080Z2 1648 1751 1854 2060 2163
CTSP8073Z2 2197 2334 2471 2746 2883 CTSP6080Z2 1717 1824 1931 2146 2253
CTSP9073Z2 2323 2468 2614 2904 3049 CTSP8080Z2 2390 2540 2689 2988 3137
CTSP5073Z2W 1634 1736 1838 2042 2144 CTSP9080Z2 2517 2674 2831 3146 3303
CTSP6073Z2W 1683 1788 1894 2104 2209 CTSP5080Z2W 1942 2064 2185 2428 2549
CTSP8073Z2W 2315 2460 2605 2894 3039 CTSP6080Z2W 2002 2127 2252 2502 2627
CTSP9073Z2W 2443 2596 2749 3054 3207 CTSP8080Z2W 2755 2927 3100 3444 3616
CTW57358Z2 709 753 797 886 930 CTSP9080Z2W 2906 3087 3269 3632 3814
CTW57368Z2 834 886 938 1042 1094 CTW58058Z2 816 867 918 1020 1071
CTWI573Z2 968 1029 1089 1210 1271 CTW58068Z2 962 1022 1082 1202 1262
CTW57358K45Z2 709 753 797 886 930 CTWI580Z2 1123 1193 1264 1404 1474
CTW57368K45Z2 834 886 938 1042 1094 CTW58058K45Z2 816 867 918 1020 1071
CTWI573K45Z2 968 1029 1089 1210 1271 CTW58068K45Z2 962 1022 1082 1202 1262
CTP2073Z2 213 226 239 266 279 CTWI580K45Z2 1123 1193 1264 1404 1474
CTPE73Z2 352 374 396 440 462 CTP2080Z2 245 260 275 306 321
CTPEW73Z2 371 394 418 464 487 CTPE80Z2 400 425 450 500 525
CTPEW80Z2 429 456 482 536 563

1.54 1/2022
ROCCA-C
Article approval

701

702

703

704

705

701

702

703

704

705
CARCASE LINE 86 CT8086Z2TV 2358 2506 2653 2948 3095
CT3086Z2 1421 1510 1598 1776 1865 CT9086Z2TV 2466 2620 2774 3082 3236
CT4086Z2 1502 1596 1690 1878 1972 CGFV4586M 562 597 632 702 737
CT4586Z2 1541 1637 1733 1926 2022 CGFV6086M 611 649 688 764 802
CT5086Z2 1578 1676 1775 1972 2071 CTSP5086Z2 1781 1892 2003 2226 2337
CT6086Z2 1661 1765 1868 2076 2180 CTSP6086Z2 1854 1970 2086 2318 2434
CT8086Z2 2254 2395 2536 2818 2959 CTSP8086Z2 2582 2744 2905 3228 3389
CT9086Z2 2363 2511 2659 2954 3102 CTSP9086Z2 2718 2888 3058 3398 3568
CT3086Z2IS 1491 1584 1678 1864 1957 CTSP5086Z2W 2098 2229 2360 2622 2753
CT4086Z2IS 1557 1654 1751 1946 2043 CTSP6086Z2W 2162 2297 2432 2702 2837
CT4586Z2IS 1587 1686 1786 1984 2083 CTSP8086Z2W 2974 3160 3346 3718 3904
CT5086Z2IS 1624 1726 1827 2030 2132 CTSP9086Z2W 3136 3332 3528 3920 4116
CT6086Z2IS 1682 1787 1892 2102 2207 CTW58658Z2 877 932 986 1096 1151
CT8086Z2IS 2552 2712 2871 3190 3350 CTW58668Z2 1034 1098 1163 1292 1357
CT9086Z2IS 2682 2849 3017 3352 3520 CTWI586Z2 1210 1285 1361 1512 1588
CT3086SZ2 1541 1637 1733 1926 2022 CTW58658K45Z2 877 932 986 1096 1151
CT4086SZ2 1606 1707 1807 2008 2108 CTW58668K45Z2 1034 1098 1163 1292 1357
CT4586SZ2 1637 1739 1841 2046 2148 CTWI586K45Z2 1210 1285 1361 1512 1588
CT5086SZ2 1672 1777 1881 2090 2195 CTP2086Z2 264 281 297 330 347
CT6086SZ2 1731 1839 1948 2164 2272 CTPE86Z2 432 459 486 540 567
CT8086SZ2 2626 2790 2954 3282 3446 CTPEW86Z2 464 493 522 580 609
CT9086SZ2 2755 2927 3100 3444 3616
CTH6086Z 1211 1287 1363 1514 1590
CTH6186Z 1250 1328 1406 1562 1640
CTH7686Z 1282 1362 1442 1602 1682
CTH9086Z 1638 1741 1843 2048 2150
CTK6086Z2 1786 1897 2009 2232 2344
CTK8086Z2 2378 2526 2675 2972 3121
CTK9086Z2 2486 2642 2797 3108 3263
CTK6086SZ2 1853 1969 2084 2316 2432
CTK8086SZ2 2747 2919 3091 3434 3606
CTK9086SZ2 2880 3060 3240 3600 3780
ANBLBOG 337 337 337 337 337
CT8086BZ2TV 2720 2890 3060 3400 3570
CT9086BZ2TV 2854 3033 3211 3568 3746

Approved CARCASE LINE 73

Dishwashers Front weight approx. Possible appliances:
11,0 kg MIELE all appliances with retrofit set
AEG all appliances with retrofit set
BSH all appliances with retrofit set

CARCASE LINE 80
Front weight approx. Possible appliances:
12,0 kg MIELE all appliances with retrofit set
AEG all appliances with retrofit set

CARCASE LINE 86
Front weight approx. Possible appliances:
13,0 kg MIELE large capacity appliances with
retrofit set:
- G5055SCVIXXL
- G5055VIXXL
- G5265SCVIXXL
- G5265VIXXL
- G5278SCVIXXL
- G7155VIXXL

1/2022 1.55
1.56 1/2022
CONTINO | AVANCE

Carcase style /
Glass fronts
Carcase style / Glass fronts

10.

Handle-less kitchen concepts 10. 01

Carcase style 10. 02-05

CONTINO Carcase style 10. 06-07

Pull-out and drawer system M8 10. 08

CONTINO Handle solutions 10. 09-10

CONTINO Comfort features 10. 11

CONTINO Handle-less opening systems 10. 12

CONTINO Glass fronts 10. 13

AVANCE Carcase style 10. 14-15

AVANCE Handle solutions 10. 16-17

AVANCE Handle-less opening systems 10. 18

1/2022 10.
 CONTINO | AVANCE
Carcase style /
Glass fronts

Carcase style / Glass fronts

10.

10. 1/2022
Handle-less kitchen concepts

This sales brochure contains two different product families of handle-less kitchens.

Apart from the established AVANCE, one further version of different style and own design feature is available to
choice.

CONTINO has the popular profile grip handle concept of the AVANCE – but with a new arrangement. The upper
grip handle of the 80 cm high floor unit is immediately beneath the worktop.

These product families cannot be used in combination!

Key differences and hints for the handle-less kitchens at a glance:

Differentiating factors
AVANCE CONTINO

Grip handle position

Floor unit height 73 cm / 86 cm

C1

Grip handle position

Floor unit height 80 cm

AVANCE AVANCE

C1

Handle feature

Handle feature on the wall unit

1/2022 10.01
Carcase style
Carcase 273 platinum

The classic of our two colour concepts is the carcase in K 273 for light, plain coloured front programmes, as the front and car-
platinum. It can be planned throughout with visible sides in case can be perfectly matched, thanks to the freely selectable
all the usual surround accessory styles and with colour co-ordi- carcase edge.
nated interior. A usable carcase with a hard-wearing and easy
to clean surface. Ideal for solid kitchen planning, particularly

Sturdy cupboard construction of melamine coated Frames up to 60 cm cupboard width in 3-layer chipboard
3-layer chipboard in K 273 platinum, above in MDF and for 120 cm wide cupboards in break-proof
sides 16 mm and cupboard floors 19 mm thick. chipboard.

Inner drawer/ pull-out with front panel in aluminium

powder-coated 060 silver grey metallic.

Double welded steel frames with minimalist stepped profile

design, powder-coated all round in 060 silver grey metallic.
90° walls inside for ideal storage use. Ball bearing and synchro-
nised full-extension guide rails with shock absorbers in both
directions.
Pull-out glass sides in Optiwhite-clear glass quality as standard.

Sturdy plinth legs, fully adjustable plates, for plinth heights from
7 – 20 cm.
Plinth cover in melamine finish, already included in the cupboard
price.

10.02 1/2022
Carcase style
Carcase 284 carbon grey

The dark carcase in K 284 carbon grey is an eye-catcher for provides a pleasantly subtle background colour for harmonious
kitchens and living room concepts in sophisticated interior de- planning with dark plain colours or high quality veneers, metal
sign. It can also be planned throughout with visible sides in al- or ceramic surfaces. For the dark carcase we generally recom-
most all surround accessory types as well as colour coordinated mend the use of the uniform carcase edge in K 284, for optical
interior. The matt surface of the dark carcase in carbon grey reasons.

Stable cupboard construction of melamine coated Frames up to cupboard width 60 cm in 3-layer chipboard,
3-layer chipboard in K 284 carbon grey, above in MDF and for 120 cm wide cupboards in strong
sides 16 mm and cupboard floors 19 mm thick. chipboard.

Inner drawer/pull-out with front panel of aluminium,

powder-coated 061 carbon metallic.

Double welded steel frames with minimalist stepped profile

design, powder-coated all round in 061 carbon metallic.
90° walls inside for ideal storage use. Ball bearing and synchro-
nised full-extension guide rails with shock absorbers in both
directions.
Pull-out glass sides of quality grey tinted-clear glass as
standard.

Sturdy plinth legs, fully adjustable plates, for plinth heights from
7 – 20 cm.
Plinth cover in coated melamine finish, already included in the
cupboard price.

1/2022 10.03
Carcase style

Carcase 273
Pull-out and drawer version
Waste disposal system

Inner drawer/-pull-out with front panel in aluminium,

powder coated 060 silver grey metallic

Pull-out glass sides in Optiwhite clear glass quality,

standard

Inner drawer/-pull-out with front panel

in 1.6 cm thick surround accessory style

Alternatively, the pull-out glass sides can be replaced

with high wall steel frames.

Waste disposal system on metal frame

housing 060 silver grey metallic
waste bins colour matching in 160 silver grey

10.04 1/2022
Carcase style

Carcase 284
Pull-out and drawer versions
Waste disposal system

Inner drawer/-pull-out with front panel in aluminium

powder-coated 061 carbon metallic

Pull-out glass sides in quality grey tinted clear glass

standard

Inner drawer/- pull-out with front panel

in 1.6 cm thick surround accessory style

Alternatively, the pull-out glass sides can be replaced

with high wall steel frames.

Waste disposal system on metal frame

housing 061 carbon metallic
waste bins colour matching in 161 carbon

1/2022 10.05
CONTINO Carcase style

The carcase concept CONTINO-programmes have a modified carcase from the

popular carcase concept. Floor and tall units have either one
or two grip handles incorporated as an additional feature.
Grip handles in anodised aluminium style handle type No.
888.413 or lacquered in front colour handle type 886…
are dimensionally coordinated to the respective cupboard
combination and largely prepared without joints.
Grip handles are therefore made, specifically in form and di-
mension, for the appropriate use -and the necessary measure-
ments are order related.
The installation of certain appliances necessitates a deviation
of this type of handle, i.e. in some cases these grip handles
cannot be used. In these cases handle type No. 887.413
or 885… (colour lacquered), with integrated metal shielding
and chamfered towards the rear in the handle area, are used.
This version is adjusted to the appearance of the grip handle.

Floor units In principle the floor unit starts with the rip handle beneath the
1. Grip handle
worktop. A front division, drawer and door below (TS-division),
directly below the worktop
is not possible. Therefore the only division possible is as follows:
- Door
- Tall pullout
- 2 pullouts
- 2 drawers and 1 pullout

The primary grip handle position for tall units is according to

2. Grip handle the floor unit. Certain housing units and cupboards with a
second grip handle special interior are exceptions.
for pullouts is optional Grip handles on tall units in the height 154 cm are arranged
above. Please note the respective measurements on the fol-
lowing pages.

Floor units C1-type With this floor unit type the 2. Grip handle is omitted. The
lower pullout and where necessary, the drawer above, can be
operated with the handle-less opening system Tip-Softclose
C1 or if required with SensoMatic.

No grip handle * *
Handle-less
opening system *

Wall units For handling the doors on wall units, there is an integrated
grip handle at the bottom shelf. The doors close flush with the
cupboard side at the bottom.
We confirm this type on the order with handle No. 881.000.

10.06 1/2022
CONTINO Carcase style

Visible sides and visible areas Visible sides and visible areas of floor and tall unit exterior
sides do not have a cut-out for the grip handle. Here the grip
handle finishes at the interior side.

Front coloured grip handles Colour matching grip handles provide a homogenous appear-
ance. A colour matching matt lacquer is used for plain colours.
Textured decors are given a matching colour.
The amount to be lacquered includes all required grip handles
necessary for processing, including the covering caps. The ex-
tra charge is calculated by adding up all grip handle lengths. If
an order contains several front colours, it may make sense to
paint the grip handles uniformly. In this case, please state the
leading front colour.
Alternatively, other LEICHT standard colours or RAL/NCS-
shades (please note extra charge!) can also be used. The fol-
lowing metallic colours are also available as a special feature.
409 gold brass 428 copper 429 bronze
416 bronze dark 405 stainless steel

Grip handle colour lacquered MPGHL per m. 36 points

Handle type No. 886…

Drawers and pullouts All programmes have a pullout-system incorporating mainte-

Style L3 nance-free, fully extendible guides with self closing and cush-
ioned retraction.
The runner guide, synchronised over the entire expansion,
ensures a high lateral stability, combined with silky-smooth
running. As an option, the synchronous control (type:SYN)
can be ordered for wide and less deep drawers and pull-outs.
This synchronises the two runners via two racks by means of
a torsion bar. The permitted total load capacity of all L3/M3
drawers as well as all L3/M3 pull-outs, up to a planning width
of 60 cm is 40 kg and that of wider pull-outs is 70 kg. For a
smaller cupboard depth ( < 58 cm) 40 kg runners are generally
fitted. In principle, pull-out fronts, higher than 79,25 cm are
fitted with 70 kg runners in principle.
Double walled welded steel frames and the robust 16 mm thick
floor, with grey laminate facing, form the sturdy basic carcase.
An installation-friendly characteristic is the total accessibility
of the three-dimensional front adjustment. Pullouts and draw-
ers are particularly easily mounted and dismounted through a
consumer-friendly construction.
All pullouts have attached glass sides. The 8 mm thick white
Retraction cushioning: glass imparts a particularly top quality note. The straight inte-
The integrated retraction-cushioning provides silent closing for rior sides of the frames with a narrow wiping lip allow for an
pullouts and drawers with minimum application. optimal loading capacity.

1/2022 10.07
CONTINO Carcase style
Pull-out and drawer system M8
Extra charge 30 points per drawer /pull-out – available from April 2022

As an alternative to the standard pull-out/drawer system L3 or

M3, the 8 mm thick, very thin walled M8 frame system, can also
be ordered for PRIMO/EVO kitchens at extra charge. The filigree
look of this frame is only available as a steel version and is only
supplied with a dark powder coating in 061 carbon metallic. In
contrast to L3/M3 the M8 system runs on Dynapro underfloor
rails, which are installed underneath the 16 mm thick pull-out/
drawer, therefore providing a larger usable space of the drawer.
For the selection of the interior fittings, our L-Box and Combo
systems, as well as anti-slip mats and wool felt, are available.
The permitted furnishing items for M8 are described in the hea-
dings of the accessories chapters (chapt. 90 ff). In these pages,
specially modified article variants for M8, are marked with a
symbol. Articles not available are explicitly excluded.

M8 Special article variant for M8,

Add a …U to the order type.

M8 Article not available for M8.

All M8 frames include a 3-dimensional adjustment, i.e. fronts

can be adjusted in height and width and also the tilt of the
drawer on the rails. The guide technology is damped in both
directions and has a self-closing mechanism. TipSoftclose and
Sensomatic are both available for handleless designs. They can
also be combined with our pull-out interior lighting. Pull-outs
with support frame for waste bins of sink-/recyclable material
cupboards up to a width of 60 cm are supplied with the M3
runner system.

The permitted total load-bearing capacity of all M8 drawers as

well as M8 pull-outs up to a planning width of 60 cm is 40 kg.,
that of wider pull-outs is 70 kg. With a smaller cupboard depth
(> 58 cm) 40 kg runners are generally fitted. Pull-out fronts more
than 79,25 cm high always have 70 kg runners.

The furnishing of your kitchen order with M8 frames and Dyna-

pro-under floor runners is done via the pull-out/drawer system
selection in the header data of your planning programme:
Variant key M8 (exclusively in 061 carbon metallic). Please note
that in this case the dark carcase K 284 carbon grey must be
preselected.

10.08 1/2022
CONTINO Handle solutions

Dishwasher The handle recess runs seamlessly below the worktop:

CARCASE LINE 73
From plinth height 14 cm and an appliance height of 82 cm.
For plinth heights smaller than 14 cm a dishwasher front with a
special handle is essential.

CARCASE LINE 80
From plinth height 10 cm and an appliance height up to 84.5 cm.
For plinths smaller than 10 cm, please check the feasible plinth
heights of the chosen appliance. If necessary, an appliance front
with fold-down blender is required.

CARCASE LINE 86
The grip handle runs through, regardless of plinth and appliances
height. We recommend a standard plinth height of 7 cm. With
plinth heights below 10 cm, please pay attention to the feasible
minimum plinth height of the chosen appliance.

The planning depth corresponds to the standard depth of 58 cm.

The grip handle incorporated in the carcase is constructively not The following examples show formally adapted separate solu-
generally usable. Certain cupboard functions, housing units or tions. They are gathered under the special handle No. 887.413/
front panels necessitate special solutions. 885….

Dishwasher fronts with a special handle solution are used when

the appliance height is larger than the overall height of the floor
unit run plus plinth height and minus 5 cm (height of the grip
handle).

With doubled dishwasher fronts, e.g. CGFV 60 80 61 Z2 a

continued grip handle to the adjacent cupboards is possible.

1/2022 10.09
CONTINO Handle solutions

Corner carousels Carousel corner units have a special grip handle which is directly
screwed to the front. On opening, front and grip handle swing
into the carcase. The connection grip handle of the adjacent
cupboards covers the carcase sides of the carousel corner unit.
A clearance of approx. 2 mm in the area of the grip handle
combination ensures a faultless function.

Built-in refrigerators This handle solution is not recommended as it interrupts the

handle route. Additional covering caps, the formal break
caused through the offset depth of the handle areas and ergo-
nomic difficulties, are disadvantages which cause us to recom-
mend cupboards with vertical grip handles.
Refrigerator front panels with a particular height or double
doors (fridge/freezer) are similarly solved. With 2-door appli-
ances the necessary joint is always positioned in the area of the
connection plate.

Sesame solutions With certain fronts even special styles of grip handles are not
justifiable. In these cases we use so-called “sesame-solutions”.
These react to pressure on the front. After pressing, the built-in
hinge releases the front and it can then be opened from be-
hind. The door is closed by lightly pushing in position.

Inset handle In addition to the solutions mentioned, the inset handle,

...xxx powder-coated
matching in form, can ease access to cupboard or appliance.
...032 magnolia
...100 arctic A solution on request and at extra charge.
...103 merino
710.405 / 720.xxx ...120 frosty white
...130 mohair Inset handle 710.405 31 points
...134 olive grey Inset handle 720.xxx 60 points
...136 sand grey
...137 taupe grey
...138 fossil grey
...139 lava
...273 platinum
...277 black
...279 midnight blue
...282 alpine grey
...284 carbon grey
...285 basalt grey
...286 black slate
…307 carbon glimmer

10.10 1/2022
CONTINO Carcase style
Comfort features

CONTINO with 35 ° bevelled edge CONTINO arrangements can be confirmed with our well known
35° 35° horizontal bevelled edge via the header data (horizontal
front edge geometry) of the planning programmes.
The revaluation AN K35 for the bevelled edge is carried out on
all grip handle positions on the cupboard.
The extra charge per items is 85 points.
Only programmes which are available in our AVANCE product
line are authorised.

The deployment of this comfort feature is valid for the follow-

ing cupboard types:
• CONTINO floor units (also valid for C1)
• floor unit blenders
• rear panels in front style
• floor unit end panels
• dishwasher fronts
• CONTINO tall units
• tall unit side panels

The following elements are excluded:

• CONTINO wall units
• separate front parts CFT …
• hob units CTH …
• tall unit blenders > carcase height 154
• open module appliance niches for module tall units

Opening system C1 You can plan your kitchen with the version C1 for all floor units
via the header data of planning programmes in a kitchen or-
der. However, you can order further tall and wall units, as well
as floor units without the C1 feature, without changing the
header in the same programme for this order. All permitted
cupboards are marked in the pricelist with a C1 symbol.
This floor unit style does not have the second grip handle.
The bottom pull-out and, if applicable, the drawer above are
operated with the handleless Tip-Softclose opening system as
standard or optionally with the SensoMatic.

Variant key
“XXX” P1/C1 preferably mechanical, otherwise as item description
“EZS” P1/C1, preferably electric, otherwise as item description.

Extra charge C1 for Tip-Softclose 60 points

(Each additional element 57 points)
Extra charge C1 for SensoMatic 217 points

Please add 1 to the type

Example 1: CT 60 80 Z2 = cupboard with 2 grip handles
C1T 60 80 Z2 = cupboard with one grip handle above
Extra charge 60 points
The pull-out below with Tip-Softclose
Example 2: CT 60 80 S2Z = cupboard with two grip handles
C1T 60 80 S2Z = cupboard with one grip handle above
Extra charge 117 points
The drawer (above the pull-out below) with Tip-Softclose,
the pull-out below with Tip-Softclose.
For further information see page 10.06. as well as 13.02 – 13.07.

1/2022 10.11
CONTINO Handle-less opening systems
SensoMatic / SensoMatic-K / Electrical damper actuators

Type sketch Description/Planning Type

SensoMatic Extra charge

for a C1 pullout or drawer (factory installed) MPC1EZS 157
1 push-out unit Œ
1 connection cable 
.
Mains adapter  SMNT 160
mains adapter per installation

The mains supply must be connected to a switchable socket,

so that it can be switched off during disturbance!

 Power lead  SMNK200 15

Length 200 cm
 For Switzerland SMNK200CH 19
 For Great Britain SMNK200GB 22
 For USA SMNK200US 32

Connecting cable between cupboards Ž
Length 100 cm SMVK100 13
Length 160 cm SMVK160 15
Length 200 cm SMVK200 15

SensoMatic-KT Extra charge

for one refrigerator door in housing unit, installed at factory ANEKT 461
1 ejection unit above and below the refrigerator Œ
 1 connection cable to the power supply 50 cm
1 Senso switch installed in cupboard side 
 1 intermediate shelf with internal blender
1 plug-in power supply AV NT772 24 VDC, 16 watt, 100 - 240 VAC, 0.36 A, 50 - 60 Hz Ž
with connection cable 110 cm

For refrigerators up to 178 cm installation height

Freezers with a niche height of 178 cm and fridge-freezer combinations, please order quantity 2.
 Also suitable for refrigerators with drag-door!
Not for refrigerators with pull-outs and freezers with 178 cm niche height with plinth motor.

The power adaptor is only suitable for use with a SensoMatic-KT-unit.

For different countries: EU (incl. CH), GB, USA
the connection cable must not be extended!
max. length 160 cm
Essential to state appliance manufacturer!
Opening measurement 3 cm.

Electric drive mechanism for wall units with top hinged door ANOAKE 377
1 motor drive
1 connecting cable 200 cm to the distribution hub

For cupboard height more than 30 cm.

Extra charge for cupboards up to 120 cm with a motor.

Electric drive mechanism for wall units with swing flap doors ANOSKE 406
1 motor drive
1 connecting cable 200 cm to the distribution hub

Extra charge for cupboards up to 120 cm with a motor.

Please plan 2x AN OSKE for cupboards larger than 120 cm.

Electric drive mechanism for wall units with fold-up doors ANOKE 377
1 motor drive
1 connecting cable 200 cm to the distribution hub

Extra charge for cupboards up to 120 cm with a motor.

Electric drive mechanism for lift-up doors ANEKE 377

1 motor drive
1 connecting cable 200 cm to the distribution hub

Connecting set AVNT 157

1 mains adapter 230 volt with 200 cm feed cable
1 distribution cable (6 metres)
5 distributions hubs
10 cable end protection caps

10.12 1/2022
Glass fronts

Programme related glass fronts

Essential to state glass type on order

Opaque glass
Clear glass
where choice is available!

Requested glass types

Front style Programme G GAO Frame type Cupboard ranges Type definition
ESG ESG

Front with glass cutout GLA

CLASSIC-FF-C • •
CLASSIC-FS-C • •
CONCRETE-C • • In front colour matching the See chapter
LAIKA-C • • ...PG
respective programme design - wall units
LARGO-FG-C • •
STEEL-C • •
STONE-C • •

e.g. CLASSIC-FF-C

Frame RAH
BONDI-C • •
CERES-C • •
F 45-C • •
IKONO-C • •
MADERO-C • •
MARMO-C • •
MINERA-C • • In front colour matching the See chapter
ORLANDO-C • • ...PG
respective programme design - wall units
PEARL-C • •
e.g. CERES-C SELVA-C • •
SIRIUS-C • •
SYNTHIA-C • •
TERMA-C • •
TOCCO-C • •
TOPOS-C • •

1/2022 10.13
AVANCE Carcase style

The carcase concept AVANCE programmes have a modified carcase from the original
carcase concept. One or two, as the case may be, grip handles
are incorporated in floor and tall units as an additional element.
Recessed handle in anodized aluminium style, handle type
No. 888.413 or front colour lacquered handle type No.
886… have been largely prepared without grooves, dimen-
sionally matching with the appropriate cupboard combination.
Therefore grip handles are specifically made to order in form
and measurement to the respective purpose and the require-
ment.
Fitting of certain appliances requires deviations from this handle
form, e.g. grip handles in some cases cannot be used. In these
special cases we use the handle type No. 887.413 resp.
885... with a metal trim behind, a type variant matching the
appearance of the grip handle.

Carcase height 80 cm With carcase height of 80 cm, the grip handle is positioned be-
low the upper drawer line, requiring a fixed front split with up-
per drawer or appropriate blender. Below the drawer line vari-
ous front splits can be chosen for doors, pullouts or drawers.

1. Grip handle
below the
uppermost drawer

2. Grip handle The primary grip handle position for tall units is according to
second grip handle the floor unit, with the exception of certain housing units and
for pullouts is optional cupboards with special interior fitments.

Grip handles of tall units in height 154 cm are positioned

above. Please pay attention to the relevant measurements on
the following pages.

Visible sides and visible areas Visible sides and visible areas of floor and tall unit sides have
no cut-out for the recessed handle. Here it ends on the inside.

10.14 1/2022
AVANCE Carcase style

Front coloured grip handles Colour matching grip handles provide a homogenous appear-
ance. A colour matching matt lacquer is used for plain colours.
Textured decors are given a matching colour.
The amount to be lacquered includes all required grip handles
necessary for processing, including the covering caps. The ex-
tra charge is calculated by adding up all grip handle lengths. If
an order contains several front colours, it may make sense to
paint the grip handles uniformly. In this case, please state the
leading front colour.
Alternatively, other LEICHT standard colours or RAL/NCS-
shades (please note extra charge!) can also be used. The fol-
lowing metallic colours are also available as a special feature.
409 gold brass 428 copper 429 bronze
416 bronze dark 405 stainless steel

Grip handle colour lacquered MPGHL per m. 36 points

Handle type No. 886…

Drawers and pullouts All programmes have a pullout-system incorporating mainte-

Style L3 nance-free, fully extendible guides with self closing and cush-
ioned retraction.
The runner guide, synchronised over the entire expansion,
ensures a high lateral stability, combined with silky-smooth
running. As an option, the synchronous control (type:SYN) can
be ordered for wide and less deep drawers and pull-outs. This
synchronises the two runners via two racks by means of a tor-
sion bar. The permitted total load capacity of all L3/M3 drawers
as well as all L3/M3 pull-outs, up to a planning width of 60
cm is 40 kg and that of wider pull-outs is 70 kg. For a smaller
cupboard depth ( < 58 cm) 40 kg runners are generally fitted. In
principle, pull-out fronts, higher than 79,25 cm are fitted with
70 kg runners in principle.
Double walled welded steel frames and the robust 16 mm thick
floor, with grey laminate facing, form the sturdy basic carcase.
An installation-friendly characteristic is the total accessibility of
the three-dimensional front adjustment. Pullouts and drawers
are particularly easily mounted and dismounted through a con-
sumer-friendly construction.
All pullouts have attached glass sides. The 8 mm thick white
glass imparts a particularly top quality note. The straight interior
sides of the frames with a narrow wiping lip allow for an optimal
loading capacity.

Retraction cushioning:
The integrated retraction-cushioning provides silent closing for
pullouts and drawers with minimum application.

1/2022 10.15
AVANCE Handle solutions

The grip handles normally incorporated in the carcases are not The following examples show formally adapted singular so-
generally constructively possible. Certain cupboard functions, lutions. These are listed under the special handles number
housing units or front claddings necessitate special solutions. 887.413 / 885.... .

Corner carousels
Carcase height 80 cm

Dishwasher The lined dishwasher front provides a uniform grip handle con-
tinuation to the neighbouring cupboards. Beware of a 3 cm
deeper cupboard run!

Dishwasher The front panel with an 80 cm carcase height is in two parts.

Both front parts are connected on the back with metal covered
connection plates. The front gap and the chamfered front edg-
es provide a formally adapted handle solution in this version.
Here also the offset depth of the adjoining, normal grip handles
are capped with a specific cover.

10.16 1/2022
AVANCE Handle solutions

Built-in refrigerators This handle solution is not recommended as it interrupts the

handle route. Additional covering caps, the formal break
caused through the offset depth of the handle areas and ergo-
nomic difficulties, are disadvantages which cause us to recom-
mend cupboards with vertical grip handles.
Refrigerator front panels with a particular height or double
doors (fridge/freezer) are similarly solved. With 2-door appli-
ances the necessary joint is always positioned in the area of the
connection plate.

Sesame solutions With certain fronts even special styles of grip handles are not
justifiable. In these cases we use so-called “sesame-solutions”.
These react to pressure on the front. After pressing, the built-in
hinge releases the front and it can then be opened from be-
hind. The door is closed by lightly pushing in position.

Inset handle In addition to the solutions mentioned, the inset handle,

...xxx powder-coated
matching in form, can ease access to cupboard or appliance.
...032 magnolia
...100 arctic A solution on request and at extra charge.
...103 merino
710.405 / 720.xxx ...120 frosty white
...130 mohair Inset handle 710.405 31 points
...134 olive grey Inset handle 720.xxx 60 points
...136 sand grey
...137 taupe grey
...138 fossil grey
...139 lava
...273 platinum
...277 black
...279 midnight blue
...282 alpine grey
...284 carbon grey
...285 basalt grey
...286 black slate
…307 carbon glimmer

1/2022 10.17
AVANCE Handle-less opening systems
SensoMatic-K / Electrical damper actuators

Type sketch Description/Planning Type

SensoMatic-KT Extra charge

for one refrigerator door in housing unit, installed at factory ANEKT 461
1 ejection unit above and below the refrigerator Œ
 1 connection cable to the power supply 50 cm
1 Senso switch installed in cupboard side 
 1 intermediate shelf with internal blender
1 plug-in power supply AV NT772 24 VDC, 16 watt, 100 - 240 VAC, 0.36 A, 50 - 60 Hz Ž
with connection cable 110 cm

For refrigerators up to 178 cm installation height

Freezers with a niche height of 178 cm and fridge-freezer combinations, please order quantity 2.
 Also suitable for refrigerators with drag-door!
Not for refrigerators with pull-outs and freezers with 178 cm niche height with plinth motor.

The power adaptor is only suitable for use with a SensoMatic-KT-unit.

For different countries: EU (incl. CH), GB, USA
the connection cable must not be extended!
max. length 160 cm
Essential to state appliance manufacturer!
Opening measurement 3 cm.

Electric drive mechanism for wall units with top hinged door ANOAKE 377
1 motor drive
1 connecting cable 200 cm to the distribution hub

For cupboard height more than 30 cm.

Extra charge for cupboards up to 120 cm with a motor.

Electric drive mechanism for wall units with swing flap doors ANOSKE 406
1 motor drive
1 connecting cable 200 cm to the distribution hub

Extra charge for cupboards up to 120 cm with a motor.

Please plan 2x AN OSKE for cupboards larger than 120 cm.

Electric drive mechanism for wall units with fold-up doors ANOKE 377
1 motor drive
1 connecting cable 200 cm to the distribution hub

Extra charge for cupboards up to 120 cm with a motor.

Electric drive mechanism for lift-up doors ANEKE 377

1 motor drive
1 connecting cable 200 cm to the distribution hub

Connecting set AVNT 157

1 mains adapter 230 volt with 200 cm feed cable
1 distribution cable (6 metres)
5 distributions hubs
10 cable end protection caps

10.18 1/2022
CONTINO | AVANCE
Accessory surround

Accessory surround
Surface / Material types 11. 01-03

Accessory surround - Material style 11. 04-10

11.

1/2022 11.
 CONTINO | AVANCE
Accessory surround
Accessory surround

11.

11. 1/2022
Surface / Material types

K Laminate surfaces with the code K have a finely textured sur-

face. This fine texture is particularly “kitchen-fast”, easy to look
Laminate = K
after and robust. Its elegant silky sheen emphasises the expen-
sive appearance of colours and decors. Primarily laminates
with melamine resin coating are made with this fine texture.

KH Laminate surfaces with the code KH will have a decor print

with simulated wood effect, with an appropriate surface
which, because of their specific type, must be manufactured
from other materials. In such cases colour, texture and decor
Laminate wood decor = KH
texture. This will be pressed either neutrally and without direc- print can only be matched as close as possible. In the inter-
tion, or with a grain direction or a grain figure – according to est of clarity for combinations, they are listed under the same
the type of wood to be simulated or to the desired effect. colour code. Components worked in planked style will be stag-
Single colour laminate surfaces with a wood grain texture gered and deliberately fashioned in colour mix. This technique
also belong to this group. Components with the code KH will enhances the lively wood graining in its planked appearance.
be manufactured predominantly with melamine resin or foil
wrapped surfaces. This procedure assures a relatively high de-
gree of colour matching of components from different factories
and production-schedules. An exact colour match is not achiev-
able. Colour differences are therefore unavoidable and are no
reason for complaint. This applies particularly to components

KI Image Laminate surfaces with the code KI special finish. The front
material used (surfaces with wood decor laminate) has Stacked cupboard combinations (units with top cupboards) are
Laminate wood decor
matching graining to each cupboard that emphasises the available with matching grain pattern if the combination is con-
with matching graining (Image) = KI
very natural wood appearance of prestigious craftsmanship. tained within the kitchen layout and the front lengths remains
The pictographic workmanship is exclusively designed for fronts in total below 260 cm.
of the same width.
Cupboards with alternating front widths such as housing units
90 cm wide they are not available at all in pictographic style.

KG Laminated surfaces coded KG have either a single colour decor

print. The surface is manufactured with either single or double
fore unavoidable and are no reason for complaint, particularly
when other appropriate materials are being used.
Laminate gloss = KG
sided high gloss. The surface material consists of laminate or
has a melamine resin covering. This technique achieves a high
degree of colour match and light fastness. A true colour match,
however, is technically impossible. Colour differences are there-

VM / VI Surfaces labelled VM have a super matt finish in plain colours

achieved by a special lacquering process. This process gives the
The versions VI are decorative and show the pattern texture on
the respective cupboard.
Coloured with special matt lacquer
surface an ultra matt, fine sandy appearance and a pleasant feel,
finish = VM
making it resistant to fingerprints.

KM KM features super matt surfaces in plain colours. Special lami-

nates with great durability and anti-fingerprint effect are used.
when moving items with coarse undersides.

Laminate matt = KM
The excellent surface characteristics also allow the use of the
(laminate of FENIX® material)
material for worktop surfaces. The beauty of these super matt
plain surfaces remains intact with regular cleaning and caution

1/2022 11.01
Surface / Material types

FF Lacquered components coded FF are given a finely textured sur-

face with an egg shell finish through a special technique. This
Apart from the described colour range, colours from the RAL
colour system, “Classic” and “Design” and NCS colour system
Colour lacquered finely textured = FF
effect cannot be compared with the other surface groups. An may also be freely chosen, except for the metallic and lumines-
additional contrast by way of colour choice, when combining cent paints.
with components of other surface groups, is therefore recom-
mended.

FS Lacquers with the code FS have a particularly smooth, super

matt surface. For combinations with laminate – or colour sur-
Apart from the described colour range, colours from the
RAL-colour system “Classic” and “Design”, the NCS-colour
Colour lacquered super matt = FS
faces with the same colour code but different surface code, system and Le Corbusier - Colours may also be freely chosen,
varying colour effects dependent on light incidence are una- except for the metallic and luminescent paints.
voidable.

FG Lacquered surfaces FG are lacquered in a single colour. The sur-

face is high gloss on one side. The reverse side has a satin fin-
light and other environment influences. Colour deviations from
surround materials in high gloss laminate are unavoidable and
Colour lacquered gloss = FG
ish. A polyurethane material serves as covering lacquer. The core therefore no reason for complaint.
material is MDF. This procedure achieves a smooth surface and
colour match to a large extent.
Apart from the listed colour range, colours from the RAL col-
our system “Classic” and “Design”, the NCS colour system and
Le Corbusier colours can be freely selected.
An exact colour match is not possible with additional or re-
placement items because of the natural ageing process through

MC Lacquered surfaces marked MC are given a special metallic

lacquering with a unique, shadow-like effect. This is created
The handicraft manufacturing process gives each and every
front an individual character and a unique appearance. The dif-
Metallic lacquer iridescent = MC
through a special combination of sanding pattern and lacquer- ferent texture patterns of the individual fronts give each kitchen
ing process, lending each front an individual character. an unmistakable appearance and are no reason for complaint.

ME Lacquers with the code ME are painted in a metallic colour. The sur-
face is metallic on both sides. A true colour match is not feasible for
Metallic lacquer = ME
replacements due to the natural ageing process by light and other
environmental influences. Colour differences, particularly of the
surfaces AL and ML, are unavoidable and no cause for complaint.

H Naturally grown material like wood shows differences in colour

and texture which cannot be eliminated by staining. Even dif-
A total colour fastness over the years cannot be achieved with
wood surfaces. Components works in planked style will
Wood veneer = H
fering lighting can cause apparent changes in appearance in be staggered and deliberately fashioned in colour mix.
the same wood. This effect is even more emphasised through This technique enhances the lively wood graining in its
a changed grain-direction. Vertically grained wood surfaces will planked appearance.
always show a different colour effect than those with horizon-
tal graining. These differences are natural and do not justify
a compliant. All veneer surfaces are sealed with a high grade
Polyurethane lacquer, free from heavy metal and formaldehyde,
therefore easily maintained and largely insensitive.

HI Image Fronts with veneered surfaces with the code HI are sub-
ject to a special selection. Only veneers with attractive figur-
Stacked cupboard combinations (units with top cupboards) are
supplied with matching grain pattern if the combination is in-
Wood veneer
ing are used. They have a matching grain pattern to each cluded in the kitchen layout and the front length remains in
with matching graining (Image) = HI
cupboard. Prestigious craftsmanship with a uniquely natural total below 230 cm.
appearance. The wood characteristics of style H also apply here.
The grain pattern match is used exclusively for fronts of the
same width. Cupboards with differing front widths, e.g. hous-
ing units of 90 cm, have either a separate longitudinal edge
finish or are not available with matching grain pattern.

11.02 1/2022
Surface / Material types

FB Surface finishes in the style FB invoke the appearance of concrete

or sandstone. In a manual process, the surfaces of the base ma-
smoothed edges. A matt lacquer coating gives the surface a satin
finish appearance, ensuring at the same time a high degree of du-
Coloured concrete-/stone structure = FB
terials are given a pigmented coating of fine concrete or a special rability. The reverse sides have matching colour lacquer.
lacquer. Visible edges are primarily processed with a spray applica-
tion in matching colours and materials. Concrete side panels have

MF A real metal surface is the defining characteristic of products of

the type MF. Powdered iron is applied via a specialised lacquer
on the process used. A matt lacquer covering with a magnetic
effect gives the surface a high degree of durability at the same
Metal coloured = MF
to MDF-support panels. A hand-crafted oxidation process pro- time.
duces the natural colouring of this metal. Each component has
individual character in texture and colour intensity, depending

AL Aluminium surfaces with the code AL are real metal coatings

whose authenticity and premium quality are enhanced by the el-
Aluminium = AL
egant surface finishing of the colour defining anodised coating.
The high quality aluminium sheet which is 0.8 mm thick is applied
to both sides of a chipboard panel.

PM Surfaces marked PM consist of a 2 mm thick PMMA surface.

This surface finish creates an optical depth effect, it has a matt
Polymer matt glass coated = PM
lacquer finish with an anti-fingerprint effect. The ABS layer under-
neath the PMMA is metallic coloured. Fronts are coated on one
side. Surround accessories are available only in surface finish ME.

PF The surface type PF features a lacquered wood grain texture which,

is imprinted into the paintable coating of the support material.
Colour lacquered
The satin finish is achieved through the application of a plain col-
grain texture = PF
oured Polyurethane lacquer seal.

VS Products with the code VS have a high quality thin-layer metal

facing.
profiles and thick edges in this style have a lamination in the
respective metal style.
Metal foil satin finish smooth = VS
The basic construction for tops is a high density three-layered
fine chipboard onto which the composite laminate with metal
facing and a surface protective lacquer are applied. Laminate

L Items in style L are available in the range of worktop decors.

The surface and visible edge covering consists of high quality
We therefore recommend planning items with the surface L,
with matching colour worktops only.
Worktop decors = L
worktop laminate. Some decors are also available in K and KH.
Because of the material property, there are differences between
the surface textures of L / K or L / KH.

1/2022 11.03
Accessory surround Interior

Material style

Visible carcase sides FS / FSUE

Midway shelf units, Shelf units

End units, Glass door units,
Blenders TSB / HSB / OSB

Midway roller shutter unit

Bottom shelves UB / UBS

Floor/Tall/Wall shelf units,

Availability of programme-independent components

Niche panelling WVW

Slide-away doors units

Niche panelling WVS

Ceiling blenders BDZ

Plinth covers VSF
Graining

Rear panels RW
Base plates B1

Base plates B2
Base plates B3

Base plates B4

Base plates B6
Carcase edges

Panels W1

Panels W2
Panels W3

Panels W4

Panels W6
v = vertical h = horizontal
FS W1 W2 B2 UB RW VSF
Colour style: W4 B4 W6 B6 WVW WVS UBS
...SB B1 W3 B3 BDZ
K K 032 magnolia • • • • • • • • • • • • •
Laminate
K 100 arctic • • • • • • • • • • • • •
K 103 merino • • • • • • • • • • • • •
K 120 frosty white • • • • • • • • • • • • •
K 130 mohair • • • • • • • • • • • • •
K 134 olive grey • • • • • • • • • • • • •
K 136 sand grey • • • • • • • • • • • • •
K 138 fossil grey • • • • • • • • • • • • •
K 139 lava • • • • • • • • • • • • •
K 201 keraton • v v h v h h v h v h v v v

K 202 liton • v v h v h h v h v h v v v

K 205 neroton • v v h v h h v h v h v v v

K 273 platinum • • • • • • • • • • • • •
K 282 alpine grey • • • • • • • • • • • • •
K 284 carbon grey • • • • • • • • • • • • •
K 286 black slate • • • • • • • • • • • • •
K 408 metallic •

KH KH 227 japanese pine • v v h v h h v h v h v v v

Laminate
wood decor KH 228 weather oak • v v h v h h v h v h v v v

KH 229 fjord oak • v v h v h h v h v h v v v

KH 233 antique oak • v v h v h h v h v h v v v

KH 234 highland oak • v v h v h h v h v h v v v

KH 239 karst oak • v v h v h h v h v h v v v

KH 240 walnut le midi • v v h v h h v h v h v v v

KH 241 black walnut • v v h v h h v h v h v v v

KH 242 virginia oak • v v h v h h v h v h v v v

KH 314 textured oak slate •

KH 345 mountain robinia • v v h v h h v h v h v v v

KH 368 tennessee walnut • v v h v h h v h v h v v v

KG KG 032 magnolia • • • • • • • • • • • •
Laminate gloss
KG 100 arctic • • • • • • • • • • • •
KG 103 merino • • • • • • • • • • • •
KG 120 frosty white • • • • • • • • • • • •
KG 130 mohair • • • • • • • • • • • •
KG 134 olive grey • • • • • • • • • • • •
KG 136 sand grey • • • • • • • • • • • •
11.04 1/2022
Accessory surround Interior

Material style

Visible carcase sides FS / FSUE

Midway shelf units, Shelf units

End units, Glass door units,
Blenders TSB / HSB / OSB

Midway roller shutter unit

Bottom shelves UB / UBS

Floor/Tall/Wall shelf units,

Availability of programme-independent components

Niche panelling WVW

Slide-away doors units

Niche panelling WVS

Ceiling blenders BDZ

Plinth covers VSF
Graining

Rear panels RW
Base plates B1

Base plates B2
Base plates B3

Base plates B4

Base plates B6
Carcase edges

Panels W1

Panels W2
Panels W3

Panels W4

Panels W6
v = vertical h = horizontal
FS W1 W2 B2 UB RW VSF
Colour style: W4 B4 W6 B6 WVW WVS UBS
...SB B1 W3 B3 BDZ
KG 138 fossil grey • • • • • • • • • • • •
KG 273 platinum • • • • • • • • • • • •
KG 277 black • • • • • • • • • • • •
KG 282 alpine grey • • • • • • • • • • • •
KG 284 carbon grey • • • • • • • • • • • •

VM VM 100 arctic • • • • • • • • •
Coloured with special
matt lacquer finish VM 103 merino • • • • • • • • •
VM 120 frosty white • • • • • • • • •
VM 130 mohair • • • • • • • • •
VM 134 olive grey • • • • • • • • •
VM 138 fossil grey • • • • • • • • •
VM 152 kiruna v v h v h h v h v h v v v

VM 210 marmobianco v v h v h h v h v h v v v

VM 211 marmonero v v h v h h v h v h v v v

VM 284 carbon grey • • • • • • • • • • • •

VM 286 black slate • • • • • • • • • • • •

KM KM 100 arctic • • • • • • • • • • •
Laminate matt
KM 103 merino • • • • • • • • • • •
KM 120 frosty white • • • • • • • • • • •
KM 130 mohair • • • • • • • • • • •
KM 134 olive grey • • • • • • • • • • •
KM 137 taupe grey • • • • • • • • • • •
KM 138 fossil grey • • • • • • • • • • •
KM 279 midnight blue • • • • • • • • • • •
KM 284 carbon grey • • • • • • • • • • •
KM 286 black slate • • • • • • • • • • •

FF FF 032 magnolia • • • • • • • • • • • • •
Colour lacquered
finely textured FF 100 arctic • • • • • • • • • • • • •
FF 103 merino • • • • • • • • • • • • •
FF 120 frosty white • • • • • • • • • • • • •
FF 130 mohair • • • • • • • • • • • • •
FF 134 olive grey • • • • • • • • • • • • •
FF 136 sand grey • • • • • • • • • • • • •
FF 137 taupe grey • • • • • • • • • • • • •
FF 138 fossil grey • • • • • • • • • • • • •
1/2022 11.05
Accessory surround Interior

Material style

Visible carcase sides FS / FSUE

Midway shelf units, Shelf units

End units, Glass door units,
Blenders TSB / HSB / OSB

Midway roller shutter unit

Bottom shelves UB / UBS

Floor/Tall/Wall shelf units,

Availability of programme-independent components

Niche panelling WVW

Slide-away doors units

Niche panelling WVS

Ceiling blenders BDZ

Plinth covers VSF
Graining

Rear panels RW
Base plates B1

Base plates B2
Base plates B3

Base plates B4

Base plates B6
Carcase edges

Panels W1

Panels W2
Panels W3

Panels W4

Panels W6
v = vertical h = horizontal
FS W1 W2 B2 UB RW VSF
Colour style: W4 B4 W6 B6 WVW WVS UBS
...SB B1 W3 B3 BDZ
FF 139 lava • • • • • • • • • • • • •
FF 273 platinum • • • • • • • • • • • • •
FF 277 black • • • • • • • • • • • • •
FF 279 midnight blue • • • • • • • • • • • • •
FF 282 alpine grey • • • • • • • • • • • • •
FF 284 carbon grey • • • • • • • • • • • • •
FF 285 basalt grey • • • • • • • • • • • • •
FF 448 cotta • • • • • • • • • • • • •
FF 449 fossena • • • • • • • • • • • • •
FF 488 dakar • • • • • • • • • • • • •
FF 489 manhattan • • • • • • • • • • • • •
FF 491 le havre • • • • • • • • • • • • •
FF 492 brasilia • • • • • • • • • • • • •
FF 497 corten • • • • • • • • • • • • •
FF 498 ferro • • • • • • • • • • • • •
FF 741 marès • • • • • • • • • • • • •
FF 742 cordillera • • • • • • • • • • • • •
FF 744 nasca • • • • • • • • • • • • •
FF 745 iguazu • • • • • • • • • • • • •
FF 783 taj mahal sanded • • • • • • • • • • • • •
FF 784 white fantasy sanded • • • • • • • • • • • • •
FF 785 nero san marcos satined • • • • • • • • • • • • •
FF 786 steel gray satined • • • • • • • • • • • • •
FF 787 nero assoluto waterjet • • • • • • • • • • • • •
FF 789 negresco satined • • • • • • • • • • • • •
FF 790 breccia imperiale satined • • • • • • • • • • • • •
RAL / NCS
FF 791 black musk waterjet • • • • • • • • • • • • •
FF RAL RAL-colours • • • • • • • • • • • • •

FS FS 032 magnolia • • • • • • • • • • • • •
Colour lacquered
super matt FS 100 arctic • • • • • • • • • • • • •
FS 103 merino • • • • • • • • • • • • •
FS 120 frosty white • • • • • • • • • • • • •
FS 130 mohair • • • • • • • • • • • • •
FS 134 olive grey • • • • • • • • • • • • •
FS 136 sand grey • • • • • • • • • • • • •
FS 137 taupe grey • • • • • • • • • • • • •
FS 138 fossil grey • • • • • • • • • • • • •
11.06 1/2022
Accessory surround Interior

Material style

Visible carcase sides FS / FSUE

Midway shelf units, Shelf units

End units, Glass door units,
Blenders TSB / HSB / OSB

Midway roller shutter unit

Bottom shelves UB / UBS

Floor/Tall/Wall shelf units,

Availability of programme-independent components

Niche panelling WVW

Slide-away doors units

Niche panelling WVS

Ceiling blenders BDZ

Plinth covers VSF
Graining

Rear panels RW
Base plates B1

Base plates B2
Base plates B3

Base plates B4

Base plates B6
Carcase edges

Panels W1

Panels W2
Panels W3

Panels W4

Panels W6
v = vertical h = horizontal
FS W1 W2 B2 UB RW VSF
Colour style: W4 B4 W6 B6 WVW WVS UBS
...SB B1 W3 B3 BDZ
FS 139 lava • • • • • • • • • • • • •
FS 273 platinum • • • • • • • • • • • • •
FS 277 black • • • • • • • • • • • • •
FS 279 midnight blue • • • • • • • • • • • • •
FS 282 alpine grey • • • • • • • • • • • • •
FS 284 carbon grey • • • • • • • • • • • • •
FS 285 basalt grey • • • • • • • • • • • • •
RAL / NCS
FS 286 black slate • • • • • • • • • • • • •
FS RAL RAL-colours • • • • • • • • • • • • •

FG FG 032 magnolia • • • • • • • • • • • • •
Colour lacquered
gloss FG 100 arctic • • • • • • • • • • • • •
FG 103 merino • • • • • • • • • • • • •
FG 106 brilliant white • • • • • • • • • • • • •
FG 120 frosty white • • • • • • • • • • • • •
FG 130 mohair • • • • • • • • • • • • •
FG 134 olive grey • • • • • • • • • • • • •
FG 136 sand grey • • • • • • • • • • • • •
FG 137 taupe grey • • • • • • • • • • • • •
FG 138 fossil grey • • • • • • • • • • • • •
FG 139 lava • • • • • • • • • • • • •
FG 270 graphite grey • • • • • • • • • • • • •
FG 273 platinum • • • • • • • • • • • • •
FG 277 black • • • • • • • • • • • • •
FG 279 midnight blue • • • • • • • • • • • • •
FG 282 alpine grey • • • • • • • • • • • • •
FG 284 carbon grey • • • • • • • • • • • • •
FG 286 black slate • • • • • • • • • • • • •
FG 292 silver • • • • • • • • • • • • •
FG 293 metal • • • • • • • • • • • • •
RAL / NCS
FG 294 anthracite • • • • • • • • • • • • •
FG RAL RAL-colours • • • • • • • • • • • • •

MC MC 093 copper shadow • • • • • • • • • •

Metallic lacquer
iridescent MC 094 lava shadow • • • • • • • • • •

ME ME 467 oxid silver • • • • • • • • • • • • •

Metallic lacquer
ME 468 oxid bronze • • • • • • • • • • • • •
1/2022 11.07
Accessory surround Interior

Material style

Visible carcase sides FS / FSUE

Midway shelf units, Shelf units

End units, Glass door units,
Blenders TSB / HSB / OSB

Midway roller shutter unit

Bottom shelves UB / UBS

Floor/Tall/Wall shelf units,

Availability of programme-independent components

Niche panelling WVW

Slide-away doors units

Niche panelling WVS

Ceiling blenders BDZ

Plinth covers VSF
Graining

Rear panels RW
Base plates B1

Base plates B2
Base plates B3

Base plates B4

Base plates B6
Carcase edges

Panels W1

Panels W2
Panels W3

Panels W4

Panels W6
v = vertical h = horizontal
FS W1 W2 B2 UB RW VSF
Colour style: W4 B4 W6 B6 WVW WVS UBS
...SB B1 W3 B3 BDZ
ME 469 oxid titan • • • • • • • • • • • • •
ME 770 citrine • • • • • • • • • • • • •
ME 771 opal • • • • • • • • • • • • •

H H 218 elm natural v v h v h h v h v h v v v

Wood veneer
H 221 textured oak abruzzo v v h v h h v h v h v v v

H 222 textured natural oak v v h v h h v h v h v v v

H 223 textured oak barrique v v h v h h v h v h v v v

H 262 wild oak alpine v v h v h h v h v h v v v

H 263 wild oak copper v v h v h h v h v h v v v

H 264 wild oak abruzzo v v h v h h v h v h v v v

H 266 wild oak barrique v v h v h h v h v h v v v

H 267 wild oak marsh v v h v h h v h v h v v v

H 309 bergamo elm v v h v h h v h v h v v v

H 310 ash madeira v v h v h h v h v h v v v

H 312 walnut v v h v h h v h v h v v v

H 313 textured oak copper v v h v h h v h v h v v v

H 316 textured oak marsh v v h v h h v h v h v v v

H 335 alpine natural oak h

H 360 maraval chestnut v v h v h h v h v h v v v

H 435 alpine natural oak v v h v h h h v h v v v

H 750 alpine oak smooth v v h v h h v h v h v v v

H 752 walnut smooth v v h v h h v h v h v v v

FB FB 148 cotta • • • • •
Coloured concrete-/
stone structure FB 149 fossena • • • • •
FB 188 dakar • • • • •
FB 189 manhattan • • • • •
FB 191 le havre • • • • •
FB 192 brasilia • • • • •

MF MF 297 corten • • • • •
Metal coloured
MF 298 ferro • • • • •

AL AL 167 oxid silver • • •

Aluminium
AL 168 oxid bronze • • •
AL 169 oxid titan • • •

11.08 1/2022
Accessory surround Interior

Material style

Visible carcase sides FS / FSUE

Midway shelf units, Shelf units

End units, Glass door units,
Blenders TSB / HSB / OSB

Midway roller shutter unit

Bottom shelves UB / UBS

Floor/Tall/Wall shelf units,

Availability of programme-independent components

Niche panelling WVW

Slide-away doors units

Niche panelling WVS

Ceiling blenders BDZ

Plinth covers VSF
Graining

Rear panels RW
Base plates B1

Base plates B2
Base plates B3

Base plates B4

Base plates B6
Carcase edges

Panels W1

Panels W2
Panels W3

Panels W4

Panels W6
v = vertical h = horizontal
FS W1 W2 B2 UB RW VSF
Colour style: W4 B4 W6 B6 WVW WVS UBS
...SB B1 W3 B3 BDZ
PF PF 079 ash midnight blue v v h v h h v h v h • • v
Colour lacquered
grain texture PF 082 ash alpine grey v v h v h h v h v h • • v

PF 084 ash carbon grey v v h v h h v h v h • • v

PF 085 ash basalt grey v v h v h h v h v h • • v

PF 086 ash black slate v v h v h h v h v h • • v

PF 400 ash arctic v v h v h h v h v h • • v

PF 403 ash merino v v h v h h v h v h • • v

PF 420 ash frosty white v v h v h h v h v h • • v

PF 430 ash mohair v v h v h h v h v h • • v

PF 432 ash magnolia v v h v h h v h v h • • v

PF 434 ash olive grey v v h v h h v h v h • • v

PF 436 ash sand grey v v h v h h v h v h • • v

PF 437 ash taupe grey v v h v h h v h v h • • v

PF 438 ash fossil grey v v h v h h v h v h • • v

RAL / NCS
PF 439 ash lava v v h v h h v h v h • • v

PF 473 ash platinum v v h v h h v h v h • • v

PF RAES RAL-colours ash v v h v h h v h v h • • v

VS VS 405 stainless steel • •

Metal foil satin
finish smooth

L L 032 magnolia • • • • • • •
Worktop decors
L 100 arctic • • • • • • •
L 103 merino • • • • • • •
L 120 frosty white • • • • • • •
L 130 mohair • • • • • • •
L 134 olive grey • • • • • • •
L 136 sand grey • • • • • • •
L 138 fossil grey • • • • • • •
L 152 kiruna v h v h v h h

L 177 trentino porphyr • • • • • • •

L 201 keraton v h v h v h h

L 202 liton v h v h v h h

L 204 carboton v h v h v h h

L 205 neroton v h v h v h h

L 210 marmobianco v h v h v h h

L 211 marmonero v h v h v h h

L 227 japanese pine v h v h v h h

1/2022 11.09
Accessory surround Interior

Material style

Visible carcase sides FS / FSUE

Midway shelf units, Shelf units

End units, Glass door units,
Blenders TSB / HSB / OSB

Midway roller shutter unit

Bottom shelves UB / UBS

Floor/Tall/Wall shelf units,

Availability of programme-independent components

Niche panelling WVW

Slide-away doors units

Niche panelling WVS

Ceiling blenders BDZ

Plinth covers VSF
Graining

Rear panels RW
Base plates B1

Base plates B2
Base plates B3

Base plates B4

Base plates B6
Carcase edges

Panels W1

Panels W2
Panels W3

Panels W4

Panels W6
v = vertical h = horizontal
FS W1 W2 B2 UB RW VSF
Colour style: W4 B4 W6 B6 WVW WVS UBS
...SB B1 W3 B3 BDZ
L 228 weather oak v h v h v h h

L 229 fjord oak v h v h v h h

L 233 antique oak v h v h v h h

L 234 highland oak v h v h v h h

L 239 karst oak v h v h v h h

L 240 walnut le midi v h v h v h h

L 241 black walnut v h v h v h h

L 273 platinum • • • • • • •
L 282 alpine grey • • • • • • •
L 345 mountain robinia v h v h v h h

L 368 tennessee walnut v h v h v h h

L 453 ouro preto • • • • • • •

L 456 oxide brown • • • • • • •
L 458 oxide grey beige • • • • • • •
L 481 dark concrete • • • • • • •

11.10 1/2022
CONTINO | AVANCE
Dimensions

CONTINO

Dimensions - Detail view 13. 01

Dimensions - CARCASE LINE 73 13. 02-03

Dimensions - CARCASE LINE 80 13. 04-05

Dimensions - CARCASE LINE 86 13. 06-07

Dimensions - Top cupboards / Wall units / Midway units 13. 08

AVANCE

Dimensions
Dimensions - Detail view 13. 09

Dimensions - CARCASE LINE 80 13. 10-11

13.

Dimensions - Top cupboards / Wall units / Midway units 13. 12

1/2022 13.
 CONTINO | AVANCE
Dimensions
Dimensions

13.

13. 1/2022
Dimensions (in cm) Planning dimensions (rounded off)

Detail view

0,2
1,8 - 2,1
0,25

31

1,7 Recess
wall unit
rear wall

51
56,15

Niche standard measure

(with worktop thickness 3.9 cm)

3,7 Recess
tall unit
rear wall

Worktop thickness
Worktops are planned with 2.3 cm overhang 1,0 - 6,0 (variable)
to the carcase front edge (flush planning). 3,5
To this end floor and tall units from cupboard
13,0

depth 58 cm, are pulled forward from the wall

by 1.7 cm in order to facilitate full use of the
0,25
60 cm deep worktop.
13,0

3,5

3,7 Recess
50 floor unit
46,25

rear wall

Standard plinth heights 1,7 Carcase pulled forward

4,8
10

7 cm / 10 cm / 14 cm from the wall

1,6 plinth thickness

1/2022 13.01
Dimensions (in cm) Planning dimensions (rounded off)

CARCASE LINE 73

Cupboard combinations with floor unit carcase height 73 cm

Wall units
Overall heights:
237,90
13,25 93 224,65 224
13,25 80 211,40 210
13,25 66 197
13,25 53
13,25 40
13,25
154
13,25

Niche
standard
54,25

measure
54,25
3,9 cm (1 cm - 6 cm)
Worktop
13,25
13,25
13,25
13,25
13,25
6,75 73 73 73 73 73
Plinth 14 cm (7 cm - 20 cm)

Floor units Tall units

Special floor unit heights / combinations with midway units

Wall units / Top cupboards

Overall heights:
277,65
13,25 40 264,40 40
13,25 119 40 251,15 40 27
13,25 27 40 237,90 40 27
13,25 93 27 27 224 224
13,25 80 80 210 210
13,25 66 66 197 197
13,25
13,25
13,25
13,25

Niche
standard
54,25

measure
54,25
3,9 cm (1 cm - 6 cm)
Worktop
13,25
13,25
13,25
13,25
13,25
6,75 43 73 73 73 73 73
Plinth 14 cm (7 cm - 20 cm)

Floor units Tall units

13.02 1/2022
Dimensions (in cm) Planning dimensions (rounded off)

CARCASE LINE 73

Floor units of Carcase line 73 cm

Carcase height 43 cm

3,5

43,25
39,75
34
46
56
66

Carcase height 73 cm

3,5 3,5 3,5 3,5 3,5

C1

13,0
13,0

26,25

26,25
0,25 0,25
Execution C1

13,0
13,0

0,25 0,25
3,5 3,5

73,0

73,0
C1 C1
69,5

43,0
43,0
39,75

39,75

34 34
46 46
56 56
66 66

Carcase depths 34 cm / 46 cm / 56 cm / 66 cm

Tall units matching Carcase line 73 cm

Carcase height 224 cm

0,25
Carcase height 210 cm
0,25
Carcase height 197 cm
0,25

Carcase height 154 cm

150,65

3,5
137,4
124,15

223,9
210,65
197,4
154,15
150,65

3,5 3,5 3,5

69,5

69,5
69,5

34
56 34 34 34
56 56 56

Carcase depths 34 cm / 56 cm

1/2022 13.03
Dimensions (in cm) Planning dimensions (rounded off)

CARCASE LINE 80

Cupboard combinations with floor unit carcase height 80 cm

Wall units

Overall heights:
227,15
13,25 80 213,90 217 217
13,25 66 200,65 204 204
13,25 53 190 190
13,25 40 40
13,25
13,25 154
Niche
standard
54,25

measure
54,25
3,9 cm (1 cm - 6 cm)
Worktop
13,25
13,25
13,25
13,25
13,25
13,25 80 80 80 80 80
Plinth 10 cm (7 cm - 20 cm)

Floor units Tall units

Special floor unit heights / combinations with midway units

Wall units / Top cupboards

Overall heights:
266,90
13,25 119 253,65 40
13,25 27 240,40 40 27
13,25 93 27 227,15 40 27
13,25 80 80 27 27 217 217
13,25 66 204 204
13,25 53 190 190
13,25
13,25
13,25

Niche
standard
54,25

measure
54,25
3,9 cm (1 cm - 6 cm)
Worktop
13,25
13,25
13,25
13,25
13,25
13,25 50 80 80 80 80 80
Plinth 10 cm (7 cm - 20 cm)

Floor units Tall units

13.04 1/2022
Dimensions (in cm) Planning dimensions (rounded off)

CARCASE LINE 80

Floor units of Carcase line 80 cm

Carcase height 50 cm

3,5

49,75
46,25
34
46
56
66

Carcase height 80 cm

3,5 3,5 3,5 3,5 3,5

C1

13,0
13,0

26,25

26,25
0,25 0,25
Execution C1

13,0
13,0

0,25 0,25
3,5 3,5

79,5

79,5
C1 C1
76,0

49,5
49,5
46,25

46,25

34 34
46 46
56 56
66 66

Carcase depths 34 cm / 46 cm / 56 cm / 66 cm

Tall units matching Carcase line 80 cm

Carcase height 217 cm

0,25 0,25
Carcase height 204 cm
0,25 0,25

Carcase height 190 cm

0,25 0,25
62,75
49,5
36,25

Carcase height 154 cm

137,4

3,5 3,5 3,5 3,5

124,15
110,9

217,15
203,9
190,65
154,15

150,65
150,65

150,65
150,65

3,5 3,5 3,5

76,0

76,0

76,0

34
56 34
56

Carcase depths 34 cm / 56 cm

1/2022 13.05
Dimensions (in cm) Planning dimensions (rounded off)

CARCASE LINE 86

Cupboard combinations with floor unit carcase height 86 cm

Wall units
Overall heights:
230,90
13,25 80 217,65 224
13,25 66 204,40 210
13,25 53 197
13,25 40
13,25 27
13,25
154
Niche
standard
54,25

measure
54,25
3,9 cm (1 cm - 6 cm)
Worktop
13,25
13,25
13,25
13,25
13,25
13,25
6,75 86 86 86 86 86
Plinth 7 cm (7 cm - 20 cm)

Floor units Tall units

Special floor unit heights / combinations with midway units

Wall units / Top cupboards

Overall heights:
270,65
13,25 40 257,40 40
13,25 27 40 244,15 40 27
13,25 27 40 230,90 40 27
13,25 80 80 27 27 224 224
13,25 66 66 210 210
13,25 53 53 197 197
13,25
13,25
13,25

Niche
standard
54,25

measure
54,25
3,9 cm (1 cm - 6 cm)
Worktop
13,25
13,25
13,25
13,25
13,25
13,25
6,75 43 86 86 86 86 86
Plinth 7 cm (7 cm - 20 cm)

Floor units Tall units

13.06 1/2022
Dimensions (in cm) Planning dimensions (rounded off)

CARCASE LINE 86

Floor units of Carcase line 86 cm

Carcase height 43 cm

3,5

43,25
39,75
34
46
56
66

Carcase height 86 cm

3,5 3,5 3,5 3,5 3,5

C1

13,0
13,0

39,50

39,50
0,25 0,25
Execution C1

26,25
26,25

86,25

86,25
0,25 0,25
82,75

3,5 3,5
C1 C1

43,0
43,0
39,75

39,75

34 34
46 46
56 56
66 66

Carcase depths 34 cm / 46 cm / 56 cm / 66 cm

Tall units matching Carcase line 86 cm

Carcase height 224 cm

0,25
Carcase height 210 cm
0,25
Carcase height 197 cm
0,25

Carcase height 154 cm

137,40

3,5
124,15
110,9

223,9
210,65
197,4
154,15
150,65

3,5 3,5 3,5

82,75

82,75
82,75

34
56 34 34 34
56 56 56

Carcase depths 34 cm / 56 cm

1/2022 13.07
Dimensions (in cm) Planning dimensions (rounded off)

Top cupboards with sesame solution

Carcase height 53 cm

Carcase height 40 cm 0,25

Carcase height 27 cm 0,25

52,75

53,0
0,25

39,75
39,5
26,25

26,5
34 34 34
56 56 56

Carcase depths 34 cm / 56 cm

Wall units Carcase height 119 cm

0,25
* 3,5

Carcase height 93 cm

0,25
Carcase height 80 cm * 3,5

0,25
Carcase height 66 cm * 3,5

0,25
Carcase height 53 cm

119,25
119,0
* 3,5

0,25
Carcase height 40 cm

92,75
* 3,5
92,5
79,25

79,5

0,25
* 3,5
66,25
66,0
52,75

53,0
39,75
39,5

34 34 34 34 34 34

Carcase depth 34 cm
* Drill holes for suspension rail

Front

Carcase side

Carcase ground

Grip profile

Grip profile in wall units

13.08 1/2022
Dimensions (in cm) Planning dimensions (rounded off)

Detail view

0,2
1,8 - 2,1
0,25

31

1,7 Recess
wall unit
rear wall

51
56,15

Niche standard measure

(with worktop thickness 3.9 cm)

3,7 Recess
tall unit
rear wall

Worktop thickness
Worktops are planned with 2.3 cm overhang 1,0 - 6,0 (variable)
0,25
to the carcase front edge (flush planning).
13,0

To this end floor and tall units from cupboard

depth 58 cm, are pulled forward from the wall
by 1.7 cm in order to facilitate full use of the 3,5
60 cm deep worktop.
26,25

3,5

3,7 Recess
50 floor unit
rear wall
33,0

Standard plinth height 1,7 Carcase pulled forward

4,8
10

10 cm from the wall

1,6 plinth thickness

1/2022 13.09
Dimensions (in cm) Planning dimensions (rounded off)

CARCASE LINE 80

Cupboard combinations with floor unit carcase height 80 cm

Wall units

Overall heights:
227,15
13,25 80 213,90 217 217
13,25 66 200,65 204 204
13,25 53 190 190
13,25 40
13,25
13,25 154
Niche
standard
54,25

measure
54,25
3,9 cm (1 cm - 6 cm)
Worktop
13,25
13,25
13,25
13,25
13,25
13,25 80 80 80 80 80
Plinth 10 cm (7 cm - 20 cm)

Floor units Tall units

Special floor unit heights / combinations with top cupboards

Wall units / Top cupboards

Overall heights:
266,90
13,25 119 253,65 40
13,25 27 240,40 40 27
13,25 93 27 227,15 40 27
13,25 80 80 27 27 217 217
13,25 66 204 204
13,25 53 190 190
13,25
13,25
13,25

Niche
standard
54,25

measure
54,25
Worktop 3,9 cm (1 cm - 6 cm)
13,25
13,25
13,25
13,25
13,25
13,25 37 50 66 80 80 80
Plinth 10 cm (7 cm - 20 cm)

Floor units Tall units

13.10 1/2022
Dimensions (in cm) Planning dimensions (rounded off)

CARCASE LINE 80

Floor units of Carcase line 80 cm Carcase height 80 cm

0,25 0,25 0,25

13,0

13,0

13,0
3,5 3,5 3,5

13,0

26,25
0,25

13,0

79,5
62,75
3,5 3,5

34

33,0

33,0
46
56
66

Carcase depths 34 cm / 46 cm / 56 cm / 66 cm

Carcase height 66 cm

3,5
Carcase height 50 cm

Carcase height 37 cm 0,25

13,0

66,25
62,75
3,5 3,5

49,75
34 34 34
36,5
33,0

33,0

46 46 46
56 56 56
66 66 66

Carcase depths 34 cm / 46 cm / 56 cm / 66 cm

Tall units matching carcase line 80 cm

Carcase height 217 cm

0,25 0,25
Carcase height 204 cm
0,25 0,25

Carcase height 190 cm

0,25 0,25
62,75
49,5
36,25

Carcase height 154 cm

3,5 3,5 3,5 3,5

150,65
137,4
124,15

217,15
203,9
190,65
154,15

150,65
150,65

150,65
150,65

3,5 3,5 3,5

62,75
62,75

62,75

34
56 34
56

Carcase depths 34 cm / 56 cm

1/2022 13.11
Dimensions (in cm) Planning dimensions (rounded off)

Top cupboards with sesame solution

Carcase height 53 cm

Carcase height 40 cm 0,25

Carcase height 27 cm 0,25

52,75

53,0
0,25

39,75
39,5
26,25

26,5
34 34 34
56 56 56

Carcase depths 34 cm / 56 cm

Wall units Carcase height 119 cm

0,25
* 3,5

Carcase height 93 cm

0,25
Carcase height 80 cm * 3,5

0,25
Carcase height 66 cm * 3,5

0,25
Carcase height 53 cm

119,25
* 3,5

120,7
0,25

92,75
* 3,5
94,2
79,5
80,95
66,25
67,7
54,45

53,0

34 34 34 34 34

Carcase depth 34 cm
* Drill holes for suspension rail

Front
0,2

Carcase side

Carcase ground
1,7

Front oversize wall units

13.12 1/2022
CONTINO
Alterations

General cupboard alterations - Alterations 14. 01-03

Alterations floor units - Alterations 14. 04-05

Alterations floor units - for thin worktops AP2.. on site 14. 05

Alterations tall units - Alterations 14. 06-07

Additions tall units - Alterations 14. 08

Alterations wall units - Alterations 14. 09

Alterations shelf units - Alterations 14. 10

Alterations
14.

1/2022 14.
 CONTINO
Alterations Programmes

Programmes CONTINO Programmes AVANCE Width Height

712 CLASSIC-FF-C X X
713 CLASSIC-FS-C X X
715 SIRIUS-C X X
718 SELVA-C X X
719 ORLANDO-C X X
720 MARMO-C X X
721 IKONO-C X X
722 SYNTHIA-C X X
726 IOS-M-C X X
728 IOS-C X X
733 CERES-C X X
739 BONDI-C X X
740 PEARL-C X X
741 MINERA-C X X
742 SOLID-C X X
744 BOSSA-C X 2) X
753 F 45-C X X
Alterations

754 TOCCO-C X 1) X
768 MADERO-C X X
769 TOPOS-C X X
14.
776 TERMA-C X X
783 VALAIS-C X X
784 ALURO-C X X
786 KERA-C X X
701-705 ROCCA-C X X
788 LARGO-FG-C X X
791 STEEL-C X X
793 CONCRETE-C X X
794 STONE-C X X

1) Style with thick edge

Widths outside the grid have a thick edge as follows.

On doors
Always the edge on the hinged side.

On flaps, drawer- and pull-out fronts

Always the right edge.

On housing unit fronts for large appliances GF.. and SUB-ZERO original fronts
Always both vertical edges.

2) Width can only be changed in 2.5 cm grid steps.

14. 1/2022
General cupboard alterations

Type sketch Description Planning Type

Cupboard width alteration For drawers / pullouts outside width grid, ANSB 117
Drawers / pullouts in width grid add AN SZA.
BOSSA-C width can only be changed in 2.5 cm steps.

Cupboard height alteration Height alteration only possible with door cupboards. ANSH 117
No change in recessed handle position.

Cupboard depth alteration ANST 117

Cupboard width and height alteration For drawers / pullouts outside width grid, ANSBH 156
Drawers / pullouts in width grid add AN SZA.
BOSSA-C width can only be changed in 2.5 cm steps.
Height alteration only possible with door cupboards.

Cupboard width and depth alteration For drawers / pullouts outside width grid, ANSBT 156
Drawers / pullouts in width grid add AN SZA.
BOSSA-C width can only be changed in 2.5 cm steps.

Cupboard height and depth alteration Height alteration only possible with door cupboards. ANSHT 156

Cupboard width, height and depth For drawers / pullouts outside width grid, ANSBHT 196
alteration add AN SZA.
Drawers / pullouts in width grid BOSSA-C width can only be changed in 2.5 cm steps.
Height alteration only possible with door cupboards.

Front width alteration Applicable with front parts, rear panels and ANFRB 55
Minimum width 10 cm end panels.
BOSSA-C width can only be changed in 2.5 cm steps.

Front height alteration Applicable with front parts, rear panels and ANFRH 55
Minimum height 10 cm end panels.

Front width and height alteration Applicable with front parts, rear panels and ANFRBH 73
Minimum measurements 10 cm end panels.
BOSSA-C width can only be changed in 2.5 cm steps.

Original edge style FG per cupboard

front size alteration outside the front ANOKFG 79
module, in original edge style, lacquered
programme LARGO-FG-C
In addition to the respective cupboard
alteration width and height.

Front division with recessed handle If different programmes are used, we will charge ANFTG 260
a floor- or tall unit front divided horizontally the next higher price group for the cupboard!
with recessed handle or special handle Please inquire the technical feasibility!
in standard-recessed handle heights

Extra charge = cupboard reduction / front reduction

Base type is the next bigger order unit.

Possible height and width alterations, see index page.

Height and width alterations not possible for glass door cupboards / glass fronts.

1/2022 14.01
General cupboard alterations

Type sketch Description Planning Type

Front extension For two-door cupboards please order 2 off. ANTU85 84

Door, pullout and blender Front extension on tall units for fridge and freezer
extended to 1.5 cm above floor appliances are only permitted with active ventilation LMO.
Not possible with:
Attention: - glass cupboards
order in addition a flush-with-carcase plinth - dishwasher-fronts
see page 70.04. - floor units with sliding doors
- carousel floor units

1,5

Front overhang at the side For doors, only possible against hinged side! ANFLS 168
max. 7.5 Front widened at side Dimension and type L/R necessary.
Max. front widening 7.5 cm With programme BOSSA-C width only possible in 2.5 cm
Carcase width remains unchanged raster steps, see programme page.

Pullout or drawer style alteration Price per drawer or pullout, even with ANSZA 65
with the following possibilities several alterations.
- depth alteration into smaller standard depths
- use of a 6.3 cm high hob unit drawer instead Available depths:
of a standard drawer Hob unit drawers: 50 cm (56), 60 cm (66)
- width alterations outside of the width grid Drawers and pullouts: 30 cm (34), 40 cm (46), 45 cm,
(without front alteration) 50 cm (56), 60 cm (66)

Excluded are pullouts with waste disposal systems.

Pullout with drawer pan and Only possible up to 34.5 cm front height. ANSZBL 0
inner blender In individual cases a 6.3 cm high hob drawer pan will be
used instead of the standard drawer pan.

Pullout with drawer pan and Only possible up to 34.5 cm front height. ANSZIS30 116
inner drawer above Only possible in the uppermost pullout. ANSZIS40 118
ANSZIS45 122
ANSZIS50 126
ANSZIS60 134
ANSZIS80 184
ANSZIS90 200
ANSZIS100 216
ANSZIS120 245

Drawer pan instead of pullout pan Only possible up to 34.5 cm front height. ANSZ 0

Exchange wide angle hinge Is supplied with metal front piece. ANIGE 0
through standard hinge for inner drawers Should an alteration to 16 mm front piece be desired,
or inner pullouts with spacer strip at the please confirm additional MP IGS U ... / MP IGZ U ... .
hinge side instead of wide angle hinge
with one door cupboards.
The actual width of the inner drawers or
inner pullouts is 2.5 cm below the nominal
dimension.

Exchange wide angle hinge Is supplied with metal front piece. ANIGD 0
through standard hinge for inner drawers Should an alteration to 16 mm front piece be desired,
or inner pullouts with spacer strip on both please confirm additional MP IGS U ... / MP IGZ U ... .
sides instead of wide angle hinge with
double door cupboards.
The actual width of the inner drawers or
inner pullouts is 5 cm below the nominal
dimension.

14.02 1/2022
General cupboard alterations

Type sketch Description Planning Type

Removable rear panel ANRWA 95

Back wall can be removed from the
cupboard interior.

Unit prepared for rear panel ANRWGER 0

Sides with decorative carcase edges
For staggered front partitions with
lined gaps.

Cupboard without shelves and ANOFR 0

without shelf drill holes

Carcase not glued No connection fittings are used. ANUVOV 32

Cupboard- or shelf unit carcase Professional gluing on site is essential!
assembled unglued

Door with hinge base plates Please order additionally to the desired door. per hinge base plate
for fixing to the cupboard side ANFRMGRP 5

1/2022 14.03
Alterations floor units

Type sketch Description Planning Type

Floor unit carcase side extra deep Please state depth. Depth up to 61 cm
Standard carcase style MPTUES61 L/R 66

Depth up to 76 cm
MPTUES78 L/R 107

Door with C1 - division For two-door cupboards please order 2 off. ANTC1 81
Door divided in height 43 cm (KL 73 / KL 86)
and 49.5 cm (KL 80) divided and pinned,
26,25

analogous to the C1 - division (Z2).

43,0

Example CT 50 73
with AN TC1

Blender instead of drawer ANBLS 0

Floor unit-base stabilisation For pullout units wider than 100 cm. ANBU 50
Metal profile for minimising We recommend the use for particularly heavy loads,
deflection of the plinth base, e.g. through granite worktops and heavy loads in the
installed in factory. pullouts.

4,8 Recessed plinth alteration Planning: Recommended use with cupboard combinations ANSOS 28
The end plinth is recessed of varying depths (tall unit connection to floor units with
by 4.8 cm. depth of 68 cm).
Not for pullout-floor units from 80 cm width
and tall units.

Recessed plinth alteration Possible from cupboard width 30 cm. ANSOSV 213
4,8 The end plinth is recessed Recommended for floor units from 80 cm and in
by 4.8 cm. general for tall units.
With additional metal profiles and
flanged metal sheets for installing
on site.

Recessed plinth alteration Possible from cupboard width 40 cm. ANSOSVB 298
4,8
both sides Recommended for floor units from 80 cm and in
The end plinth is recessed general for tall units.
by 4.8 cm.
With additional metal profiles and
flanged metal sheets for installing
on site.

Synchronous control for Please plan with the appropriate cupboard. SYN 26
pullout or drawer Rear panel is set back, depending on cupboard type.
1 torsion bar Using synchronised control causes additional action noise
2 gear rods and a changed running performance.
1 pair of bearing brackets with cog wheels Not possible to use in combination with handle-less opening
Installation on site systems such as Tip-Softclose or SensoMatic.
Top drawer not equippable with thin worktops.
Not for 6.3 cm high drawers.

14.04 1/2022
Alterations floor units

Type sketch Description Planning Type

Sink base unit alteration Basis for the alteration is a sink base unit with rear wall Carcase depth 61 cm
Cupboard depth 63 cm with offset in cupboard depth 68 cm. ANTSP63US 86
rear wall to the back Not in combination with AN TOSO!

Shelf closed on top Not possible with: ANOS 20

Top of the carcase with closed shelf - sink units
instead of cross beam - hob units
- carousel units

Top hinge moved to the bottom For sink units to avoid collision of sink and upper hinge. ANSVVO275 15
Top hinge moved to the bottom by 27.5 cm Available height: 32 cm to carcase top edge.
for extra deep sinks

45° chamfered edge lateral Can be ordered in connection with mitred end panel AN5K45 L/R 85
Floor unit fronts with 45° chamfered edge CTW 5 .. K45 .., see chapter 20, 22 and 24.
for mitre transition with side panel Please state L/R. Not available in ALURO-C, BOSSA-C,
IOS-C, IOS-M-C, MINERA-C, SOLID-C,
In your planning system, you can feature the style of On opening doors, the chamfered edge can only be opposite TOCCO-C, VALAIS-C
the vertical mitred edges graphically and calculatively the hinged side. Dishwasher fronts and cupboards with
via the „Vertical front edge geometry“ header data appliance niche are not possible.
version for floor units.

Possible versions are:

K45L - left 45 degree edge, lateral overhang accdg.
to programme (extra charge 85 points)
K45R - right 45 degree edge, lateral overhang accdg.
to programme (extra charge 85 points)
K45B - both sides 45 degree edge, lateral overhang
accgd. to programme (extra charge 170 points)

14,5-29,5 Alteration pullout style Preferably used for upper pullouts of the ATSP .. Z2 ANTSPZAUS 35
The pullout has a drawer back section cupboards. From cupboard width 50 cm.
25
in wood as well as a cutout covering for
pop-up waste, for installation on site.
Cutout width 14.5 up to 29.5 cm

14,5-29,5 Alteration drawer style ANTSPSAUS 35

The drawer has a back section in wood
25
as well as a cutout covering for pop-up
waste, for installation on site.
Cutout width 14.5 up to 29.5 cm

Alterations floor units

for thin worktops AP2.. on site

Type sketch Description Planning Type

Use of a steel cross bar For cupboards over 60 cm wide. ANAP2GRP 45

To strengthen the cupboard for Width alterations possible.
thin worktops on-site. For factory-made worktops which require the use of
For sinks or hob units incl. steel cross bars, the cross bars are already taken into
delivery of mounting strips account for cupboard design and costing.
for sinks or hobs.

1/2022 14.05
Alterations tall units

Type sketch Description Planning Type

Tall unit carcase side extra deep Please state depth. Depth up to 61 cm
Standard carcase style Also available for midway units. MPHUES61 L/R 92

Depth up to 76 cm
MPHUES78 L/R 146

Front overhang above Only programmes changeable in height! ANFLO 84

max. 13.25 Wall or tall unit door extended above Essential to state measurements.
Max. front extension 13.25 cm
Carcase height unchanged

Back wall brought forward For housing units where the appliance manufacturer ANRWV 104
stipulates a larger ventilation cut-out.
The back panel is not removable.
Essential to state measurements.

Integral ventilation for housing units Depending on choice of appliance, the ANINDB 0
Installation of an intermediate shelf with bottom pullout will have a drawer pan.
privacy panel. Cannot be combined with:
Ventilation grille not necessary. - Plinth cover flush front VB
- Door extension AN TU 85 (only for combination with
LMO possible)
- Appliances with plinth motor on request

Adequate ventilation for The unit produces forced ventilation behind refrigerators LMO 362
13
refrigerator-tall housing units and allows installation in tall appliance housing units
1 ventilator unit (height 13 cm) without visible ventilation grille. For Switzerland
for on-site installation Required gap above tall unit 1.5 cm. LMOCH 362
on top of tall housing units Requires tall units with extended doors (gap to floor 1.5 cm).
Power input 1.4 W Cannot be combined with flush front plinth VB. For France
1 connection cable for control unit The ventilator works with a stopping time of 1 minute LMOFR 362
300 cm long while the cooling unit is in operation.
1 electrical ventilator control For Great Britain
Connection data 230 V, 50/60 Hz LMOGB 362
1 power cable 200 cm with
earthed plug
1 connection cable to refrigerator 5 cm
with coupling
1 connection cable to ventilator 5 cm
with Euro coupling

1,5 cm 1,5 cm

AN INDB Z BLG

Compartment division vertical To be used for fitting on fixed construction shelf. 3 compartments
for on-site installation on fixed shelf Possible in crockery cupboards, housing units FV330 94
height 40 cm, depth 40 cm and floor units.
Min. carcase depth 46 cm. 4 compartments
FV445 116
FV450 116

5 compartments
FV560 137
FV576 137

Example FV5 60

14.06 1/2022
 Price group
Alterations tall units

Neutral
Type sketch Description/Planning Type C1 C2 C3 C4 C5 C6 C7 C8
Tall unit extension MPHVERL 134 143 147 158 178 187 200 213
Cupboard extension on top
up to carcase height 250 cm

Plan basic unit 217 or 224 cm.

Not possible for end tall units.
Pullout tall units on request.
Please order front alignment fitting.

Extra charge for tall units MPH1B 156 156 156 156 156 156 156 156
up to width 76 cm

Valid for all tall units and modular

tall units.

Programme TOCCO-C one-sided with thick edge.

1/2022 14.07
 Surface style
Additions tall units Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME FG MC H
Pullout tray .
for tall units and tall shelf units
Extendible with lock
Factory installed above fixed shelf in
storage units.
Other variants for on-site installation.

For cupboard width 60 cm

Pullout size: 56 x 50 cm HTAF60 301 301 415 479 515 570 498

For cupboard width 90 cm

Pullout size: 86 x 50 cm HTAF90 304 304 420 486 523 580 506

For cupboard width 120 cm

Pullout size: 116 x 50 cm HTAF120 307 307 426 493 531 589 513

Please state position and colour.

Tray is installed between cupboard sides.
Wide angle hinges MP .. SCH 155 essential
for cupboards.
Max. load 30 kg.
Pullout path 45 cm.

Alteration type for ANTAFRW 16 16 39 51 61 70 55

tall rear shelf wall
Height max. 45 cm
Extension shortened to approx. 30 cm

Preferably plan with electro board HEBO .. .

Please state rear wall height.
29,7 Only possible with tall units!

Electro board 1 socket

for tall units and tall shelf units HEBO45SD1 45 250 250 300 342 379 400 384
1 board 10.8 cm high, 29.6 cm deep HEBO50SD1 50 251 251 301 343 380 402 385
1 to 3 sockets HEBO60SD1 60 255 255 306 348 386 408 391
HEBO90SD1 90 265 265 319 361 399 423 404
Please state cupboard/shelf unit position and colour. HEBO120SD1 120 272 272 329 373 412 437 417
Position of the sockets right or left is determined
on site. 2 sockets
HEBO45SD2 45 357 357 406 448 486 507 490
HEBO50SD2 50 358 358 408 450 487 509 492
HEBO60SD2 60 362 362 413 455 492 515 497
HEBO90SD2 90 372 372 425 468 506 529 511
HEBO120SD2 120 379 379 436 480 519 543 524

3 sockets
HEBO45SD3 45 438 438 488 530 567 589 572
HEBO50SD3 50 440 440 489 531 569 590 573
HEBO60SD3 60 443 443 494 537 574 596 579
HEBO90SD3 90 454 454 507 550 588 611 593
HEBO120SD3 120 460 460 518 561 600 625 606

Change 1 plug for 2 USB ports ANUSB 53

Front alignment fitting FRAUSR 97

When the door protrudes more than 26 cm
Not available in IOS-C, IOS-M-C, VALAIS-C
above the appliance, we recommend a
front alignment fitting.
Max. overhang one third of front height!

14.08 1/2022
Alterations wall units

Type sketch Description Planning Type

Front overhang above Only programmes changeable in height! ANFLO 84

max. 13.25 Wall or tall unit door extended above Essential to state measurements.
Max. front extension 13.25 cm
Carcase height unchanged

Depth increase of wall units Not possible for: MPOT 72

up to carcase depth 38 cm - corner wall units OE 60 ..., OE 65 ..., OED ...
- diagonal wall units
- end wall units
- glass wall units

For larger depths please order AN OST 58.

Wall unit altered up to 61 cm An additional lower wall fixing rail WBEF is essential. ANOST58 87
carcase depth For design reasons we recommend a lining shelf.
1 depth increase from 38.1 up to 61 cm Wall unit end panel is essential for end of run.
1 heavy duty fixing installed in each Use specific extractor hood wall units.
side above Not available:
Please state carcase depth. - corner units
- end cupboards
- glass door cupboards
- shelves
- wall units smaller than 36.5 cm and higher 92.75 cm

Wall unit with extractor altered An additional lower wall fixing rail WBEF is essential. ANOHDT58 87
up to 60.5 cm carcase depth For design reasons we recommend a separate bottom
1 depth increase of the sides shelf in cupboard width between appliance and wall!
from 38.1 up to 60.5 cm Wall unit end panel is essential for end of run.
1 shelf below, between appliance and wall
1 heavy duty fixing installed in each
side above
The cupboard interior is not increased.
Please state carcase depth.

Wall fixing rail Dimension sketch essential. per metre

0,3 for wall unit support Please state length spanning all wall units. WBEF 31
Fixing material
5

Lower wall unit shelf Max. cupboard height 100 cm. ANOBV 40
to wall increased Possible for all wall units and wall shelf units.
Shelf in side depth, minus 0.2 cm increased

1/2022 14.09
Alterations shelf units

Type sketch Description Planning Type

Shelf height alteration ANRH 82

Shelf depth alteration ANRT 82

Shelf height and depth alteration ANRHT 109

Wall shelf unit above and below Only colour matching as interior colour! ANEINREG 46
in shelf interior design

Texture direction rear wall changed Please note the permissible maximum ANMASWE 0
The texture direction of the rear wall dimensions of the rear walls.
is changed by 90 degrees.

Rear wall style changed Please note the permissible maximum ANRWFWE 0
Contrasting rear wall to the shelf unit. dimensions of the rear walls.

Base type is the next bigger order unit.

14.10 1/2022
AVANCE
Alterations

General cupboard alterations - Alterations 15. 01-03

Alterations floor units - Alterations 15. 04-05

Alterations floor units - for thin worktops AP2.. on site 15. 05

Alterations tall units - Alterations 15. 06-07

Additions tall units - Alterations 15. 08

Alterations wall units - Alterations 15. 09

Alterations shelf units - Alterations 15. 10

Alterations
AVANCE
15.

1/2022 15.
 AVANCE
Alterations Programmes

Programmes CONTINO Programmes AVANCE Width Height

412 CLASSIC-FF-A X X
413 CLASSIC-FS-A X X
415 SIRIUS-A X X
418 SELVA-A X X
419 ORLANDO-A X X
420 MARMO-A X X
421 IKONO-A X X
422 SYNTHIA-A X X
433 CERES-A X X
439 BONDI-A X X
440 PEARL-A X X
441 MINERA-A X X
453 F 45-A X X
454 TOCCO-A X 1) X
468 MADERO-A X X
469 TOPOS-A X X
476 TERMA-A X X
486 KERA-A X X
488 LARGO-FG-A X X
491 STEEL-A X X
493 CONCRETE-A X X
494 STONE-A X X
Alterations
AVANCE

15.

1) Style with thick edge

Widths outside the grid have a thick edge as follows.

On doors
Always the edge on the hinged side.

On flaps, drawer- and pull-out fronts

Always the right edge.

On housing unit fronts for large appliances GF.. and SUB-ZERO original fronts
Always both vertical edges.

15. 1/2022
General cupboard alterations

Type sketch Description Planning Type

Cupboard width alteration For drawers / pullouts outside width grid, ANSB 117
Drawers / pullouts in width grid add AN SZA.

Cupboard height alteration Height alteration only possible with door cupboards. ANSH 117
No change in recessed handle position.

Cupboard depth alteration ANST 117

Cupboard width and height alteration For drawers / pullouts outside width grid, ANSBH 156
Drawers / pullouts in width grid add AN SZA.
Height alteration only possible with door cupboards.

Cupboard width and depth alteration For drawers / pullouts outside width grid, ANSBT 156
Drawers / pullouts in width grid add AN SZA.

Cupboard height and depth alteration Height alteration only possible with door cupboards. ANSHT 156

Cupboard width, height and depth For drawers / pullouts outside width grid, ANSBHT 196
alteration add AN SZA.
Drawers / pullouts in width grid Height alteration only possible with door cupboards.

Front width alteration Applicable with front parts, rear panels and ANFRB 55
Minimum width 10 cm end panels.

Front height alteration Applicable with front parts, rear panels and ANFRH 55
Minimum height 10 cm end panels.

Front width and height alteration Applicable with front parts, rear panels and ANFRBH 73
Minimum measurements 10 cm end panels.

Original edge style FG per cupboard

front size alteration outside the front ANOKFG 79
module, in original edge style, lacquered
programme LARGO-FG-A
In addition to the respective cupboard
alteration width and height.

Front division with recessed handle If different programmes are used, we will charge ANFTG 260
a floor- or tall unit front divided horizontally the next higher price group for the cupboard!
with recessed handle or special handle Please inquire the technical feasibility!
in standard-recessed handle heights

Extra charge = cupboard reduction / front reduction

Base type is the next bigger order unit.

Possible height and width alterations, see index page.

Height and width alterations not possible for glass door cupboards / glass fronts.

1/2022 15.01
General cupboard alterations

Type sketch Description Planning Type

Front extension For two-door cupboards please order 2 off. ANTU85 84

Door, pullout and blender Front extension on tall units for fridge and freezer
extended to 1.5 cm above floor appliances are only permitted with active ventilation LMO.
Not possible with:
Attention: - glass cupboards
order in addition a flush-with-carcase plinth - dishwasher-fronts
see page 70.04. - floor units with sliding doors
- carousel floor units

1,5

Front overhang at the side For doors, only possible against hinged side! ANFLS 168
max. 7.5 Front widened at side Dimension and type L/R necessary.
Max. front widening 7.5 cm
Carcase width remains unchanged

Pullout or drawer style alteration Price per drawer or pullout, even with ANSZA 65
with the following possibilities several alterations.
- depth alteration into smaller standard depths
- use of a 6.3 cm high hob unit drawer instead Available depths:
of a standard drawer Hob unit drawers: 50 cm (56), 60 cm (66)
- width alterations outside of the width grid Drawers and pullouts: 30 cm (34), 40 cm (46), 45 cm,
(without front alteration) 50 cm (56), 60 cm (66)

Excluded are pullouts with waste disposal systems.

Pullout with drawer pan and Only possible up to 34.5 cm front height. ANSZIS30 116
inner drawer above Only possible in the uppermost pullout. ANSZIS40 118
ANSZIS45 122
ANSZIS50 126
ANSZIS60 134
ANSZIS80 184
ANSZIS90 200
ANSZIS100 216
ANSZIS120 245

Drawer pan instead of pullout pan Only possible up to 34.5 cm front height. ANSZ 0

Exchange wide angle hinge Is supplied with metal front piece. ANIGE 0
through standard hinge for inner drawers Should an alteration to 16 mm front piece be desired,
or inner pullouts with spacer strip at the please confirm additional MP IGS U ... / MP IGZ U ... .
hinge side instead of wide angle hinge
with one door cupboards.
The actual width of the inner drawers or
inner pullouts is 2.5 cm below the nominal
dimension.

Exchange wide angle hinge Is supplied with metal front piece. ANIGD 0
through standard hinge for inner drawers Should an alteration to 16 mm front piece be desired,
or inner pullouts with spacer strip on both please confirm additional MP IGS U ... / MP IGZ U ... .
sides instead of wide angle hinge with
double door cupboards.
The actual width of the inner drawers or
inner pullouts is 5 cm below the nominal
dimension.

Removable rear panel ANRWA 95

Back wall can be removed from the
cupboard interior.

15.02 1/2022
General cupboard alterations

Type sketch Description Planning Type

Unit prepared for rear panel ANRWGER 0

Sides with decorative carcase edges
For staggered front partitions with
lined gaps.

Cupboard without shelves and ANOFR 0

without shelf drill holes

Carcase not glued No connection fittings are used. ANUVOV 32

Cupboard- or shelf unit carcase Professional gluing on site is essential!
assembled unglued

Door with hinge base plates Please order additionally to the desired door. per hinge base plate
for fixing to the cupboard side ANFRMGRP 5

1/2022 15.03
Alterations floor units

Type sketch Description Planning Type

Floor unit carcase side extra deep Please state depth. Depth up to 61 cm
Standard carcase style MPTUES61 L/R 66

Depth up to 76 cm
MPTUES78 L/R 107

Blender instead of drawer ANBLS 0

Floor unit-base stabilisation For pullout units wider than 100 cm. ANBU 50
Metal profile for minimising We recommend the use for particularly heavy loads,
deflection of the plinth base, e.g. through granite worktops and heavy loads in the
installed in factory. pullouts.

4,8 Recessed plinth alteration Planning: Recommended use with cupboard combinations ANSOS 28
The end plinth is recessed of varying depths (tall unit connection to floor units with
by 4.8 cm. depth of 68 cm).
Not for pullout-floor units from 80 cm width
and tall units.

Recessed plinth alteration Possible from cupboard width 30 cm. ANSOSV 213
4,8 The end plinth is recessed Recommended for floor units from 80 cm and in
by 4.8 cm. general for tall units.
With additional metal profiles and
flanged metal sheets for installing
on site.

Recessed plinth alteration Possible from cupboard width 40 cm. ANSOSVB 298
4,8
both sides Recommended for floor units from 80 cm and in
The end plinth is recessed general for tall units.
by 4.8 cm.
With additional metal profiles and
flanged metal sheets for installing
on site.

Synchronous control for Please plan with the appropriate cupboard. SYN 26
pullout or drawer Rear panel is set back, depending on cupboard type.
1 torsion bar Using synchronised control causes additional action noise
2 gear rods and a changed running performance.
1 pair of bearing brackets with cog wheels Not possible to use in combination with handle-less opening
Installation on site systems such as Tip-Softclose or SensoMatic.
Top drawer not equippable with thin worktops.
Not for 6.3 cm high drawers.

Sink base unit alteration Basis for the alteration is a sink base unit with rear wall Carcase depth 61 cm
Cupboard depth 63 cm with offset in cupboard depth 68 cm. ANTSP63US 86
rear wall to the back Not in combination with AN TOSO!

15.04 1/2022
Alterations floor units

Type sketch Description Planning Type

Shelf closed on top Not possible with: ANOS 20

Top of the carcase with closed shelf - sink units
instead of cross beam - hob units
- carousel units

Top hinge moved to the bottom For sink units to avoid collision of sink and upper hinge. ANSVVO275 15
Top hinge moved to the bottom by 27.5 cm Available height: 32 cm to carcase top edge.
for extra deep sinks

45° chamfered edge lateral Can be ordered in connection with mitred end panel AN5K45 L/R 85
Floor unit fronts with 45° chamfered edge ATW 5 .. K45 .., see chapter 26.
for mitre transition with side panel Please state L/R. Not available in MINERA-A, TOCCO-A

In your planning system, you can feature the style of On opening doors, the chamfered edge can only be opposite
the vertical mitred edges graphically and calculatively the hinged side. Dishwasher fronts and cupboards with
via the „Vertical front edge geometry“ header data appliance niche are not possible.
version for floor units.

Possible versions are:

K45L - left 45 degree edge, lateral overhang accdg.
to programme (extra charge 85 points)
K45R - right 45 degree edge, lateral overhang accdg.
to programme (extra charge 85 points)
K45B - both sides 45 degree edge, lateral overhang
accgd. to programme (extra charge 170 points)

14,5-29,5 Alteration pullout style Preferably used for upper pullouts of the CTSP .. Z2 ANTSPZAUS 35
The pullout has a drawer back section cupboards. From cupboard width 50 cm.
25
in wood as well as a cutout covering for
pop-up waste, for installation on site.
Cutout width 14.5 up to 29.5 cm

14,5-29,5 Alteration drawer style ANTSPSAUS 35

The drawer has a back section in wood
25
as well as a cutout covering for pop-up
waste, for installation on site.
Cutout width 14.5 up to 29.5 cm

Alterations floor units

for thin worktops AP2.. on site

Type sketch Description Planning Type

Use of a steel cross bar For cupboards over 60 cm wide. ANAP2GRP 45

To strengthen the cupboard for Width alterations possible.
thin worktops on-site. For factory-made worktops which require the use of
For sinks or hob units incl. steel cross bars, the cross bars are already taken into
delivery of mounting strips account for cupboard design and costing.
for sinks or hobs.

1/2022 15.05
Alterations tall units

Type sketch Description Planning Type

Tall unit carcase side extra deep Please state depth. Depth up to 61 cm
Standard carcase style Also available for midway units. MPHUES61 L/R 92

Depth up to 76 cm
MPHUES78 L/R 146

Front overhang above Only programmes changeable in height! ANFLO 84

max. 13.25 Wall or tall unit door extended above Essential to state measurements.
Max. front extension 13.25 cm
Carcase height unchanged

Back wall brought forward For housing units where the appliance manufacturer ANRWV 104
stipulates a larger ventilation cut-out.
The back panel is not removable.
Essential to state measurements.

Integral ventilation for housing units Depending on choice of appliance, the ANINDB 0
Installation of an intermediate shelf with bottom pullout will have a drawer pan.
privacy panel. Cannot be combined with:
Ventilation grille not necessary. - Plinth cover flush front VB
- Door extension AN TU 85 (only for combination with
LMO possible)
- Appliances with plinth motor on request

Adequate ventilation for The unit produces forced ventilation behind refrigerators LMO 362
13
refrigerator-tall housing units and allows installation in tall appliance housing units
1 ventilator unit (height 13 cm) without visible ventilation grille. For Switzerland
for on-site installation Required gap above tall unit 1.5 cm. LMOCH 362
on top of tall housing units Requires tall units with extended doors (gap to floor 1.5 cm).
Power input 1.4 W Cannot be combined with flush front plinth VB. For France
1 connection cable for control unit The ventilator works with a stopping time of 1 minute LMOFR 362
300 cm long while the cooling unit is in operation.
1 electrical ventilator control For Great Britain
Connection data 230 V, 50/60 Hz LMOGB 362
1 power cable 200 cm with
earthed plug
1 connection cable to refrigerator 5 cm
with coupling
1 connection cable to ventilator 5 cm
with Euro coupling

1,5 cm 1,5 cm

AN INDB Z BLG

Compartment division vertical To be used for fitting on fixed construction shelf. 3 compartments
for on-site installation on fixed shelf Possible in crockery cupboards, housing units FV330 94
height 40 cm, depth 40 cm and floor units.
Min. carcase depth 46 cm. 4 compartments
FV445 116
FV450 116

5 compartments
FV560 137
FV576 137

Example FV5 60

15.06 1/2022
 Price group
Alterations tall units

Neutral
Type sketch Description/Planning Type A1 A2 A3 A4 A5 A6 A7
Tall unit extension MPHVERL 134 143 147 158 178 187 200
Cupboard extension on top
up to carcase height 250 cm

Plan basic unit 217 cm.

Not possible for end tall units.
Pullout tall units on request.
Please order front alignment fitting.

Extra charge for tall units MPH1B 156 156 156 156 156 156 156
up to width 76 cm

Valid for all tall units and modular

tall units.

Programme TOCCO-A one-sided with thick edge.

1/2022 15.07
 Surface style
Additions tall units Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME FG MC H
Pullout tray .
for tall units and tall shelf units
Extendible with lock
Factory installed above fixed shelf in
storage units.
Other variants for on-site installation.

For cupboard width 60 cm

Pullout size: 56 x 50 cm HTAF60 301 301 415 479 515 570 498

For cupboard width 90 cm

Pullout size: 86 x 50 cm HTAF90 304 304 420 486 523 580 506

For cupboard width 120 cm

Pullout size: 116 x 50 cm HTAF120 307 307 426 493 531 589 513

Please state position and colour.

Tray is installed between cupboard sides.
Wide angle hinges MP .. SCH 155 essential
for cupboards.
Max. load 30 kg.
Pullout path 45 cm.

Alteration type for ANTAFRW 16 16 39 51 61 70 55

tall rear shelf wall
Height max. 45 cm
Extension shortened to approx. 30 cm

Preferably plan with electro board HEBO .. .

Please state rear wall height.
29,7 Only possible with tall units!

Electro board 1 socket

for tall units and tall shelf units HEBO45SD1 45 250 250 300 342 379 400 384
1 board 10.8 cm high, 29.6 cm deep HEBO50SD1 50 251 251 301 343 380 402 385
1 to 3 sockets HEBO60SD1 60 255 255 306 348 386 408 391
HEBO90SD1 90 265 265 319 361 399 423 404
Please state cupboard/shelf unit position and colour. HEBO120SD1 120 272 272 329 373 412 437 417
Position of the sockets right or left is determined
on site. 2 sockets
HEBO45SD2 45 357 357 406 448 486 507 490
HEBO50SD2 50 358 358 408 450 487 509 492
HEBO60SD2 60 362 362 413 455 492 515 497
HEBO90SD2 90 372 372 425 468 506 529 511
HEBO120SD2 120 379 379 436 480 519 543 524

3 sockets
HEBO45SD3 45 438 438 488 530 567 589 572
HEBO50SD3 50 440 440 489 531 569 590 573
HEBO60SD3 60 443 443 494 537 574 596 579
HEBO90SD3 90 454 454 507 550 588 611 593
HEBO120SD3 120 460 460 518 561 600 625 606

Change 1 plug for 2 USB ports ANUSB 53

Front alignment fitting FRAUSR 97

When the door protrudes more than 26 cm
above the appliance, we recommend a
front alignment fitting.
Max. overhang one third of front height!

15.08 1/2022
Alterations wall units

Type sketch Description Planning Type

Front overhang above Only programmes changeable in height! ANFLO 84

max. 13.25 Wall or tall unit door extended above Essential to state measurements.
Max. front extension 13.25 cm
Carcase height unchanged

Depth increase of wall units Not possible for: MPOT 72

up to carcase depth 38 cm - corner wall units OE 60 ..., OE 65 ..., OED ...
- diagonal wall units
- end wall units
- glass wall units

For larger depths please order AN OST 58.

Wall unit altered up to 61 cm An additional lower wall fixing rail WBEF is essential. ANOST58 87
carcase depth For design reasons we recommend a lining shelf.
1 depth increase from 38.1 up to 61 cm Wall unit end panel is essential for end of run.
1 heavy duty fixing installed in each Use specific extractor hood wall units.
side above Not available:
Please state carcase depth. - corner units
- end cupboards
- glass door cupboards
- shelves
- wall units smaller than 36.5 cm and higher 92.75 cm

Wall unit with extractor altered An additional lower wall fixing rail WBEF is essential. ANOHDT58 87
up to 60.5 cm carcase depth For design reasons we recommend a separate bottom
1 depth increase of the sides shelf in cupboard width between appliance and wall!
from 38.1 up to 60.5 cm Wall unit end panel is essential for end of run.
1 shelf below, between appliance and wall
1 heavy duty fixing installed in each
side above
The cupboard interior is not increased.
Please state carcase depth.

Wall fixing rail Dimension sketch essential. per metre

0,3 for wall unit support Please state length spanning all wall units. WBEF 31
Fixing material
5

Floor support LPO not possible. ANMBU 25

for minimizing deflection on wide
wall units with compartments
up to a width of 100 cm.
consisting of:
1 aluminium bar
additional central shelf supports (amount
dependent on the cupboard height)

Lower wall unit shelf Max. cupboard height 100 cm. ANOBV 40
to wall increased Possible for all wall units and wall shelf units except:
Shelf in side depth, minus 0.2 cm increased AO ... T
AOHS ...
AOE ...
AOED ...

1/2022 15.09
Alterations shelf units

Type sketch Description Planning Type

Shelf height alteration ANRH 82

Shelf depth alteration ANRT 82

Shelf height and depth alteration ANRHT 109

Wall shelf unit above and below Only colour matching as interior colour! ANEINREG 46
in shelf interior design

Texture direction rear wall changed Please note the permissible maximum ANMASWE 0
The texture direction of the rear wall dimensions of the rear walls.
is changed by 90 degrees.

Rear wall style changed Please note the permissible maximum ANRWFWE 0
Contrasting rear wall to the shelf unit. dimensions of the rear walls.

Base type is the next bigger order unit.

15.10 1/2022
Floor units

CONTINO | AVANCE
Floor units
CONTINO-CARCASE LINE 73

Carcase height 73,0 cm 20. Chapter

2.

CONTINO-CARCASE LINE 80

Carcase height 79,5 cm 22. Chapter

CONTINO-CARCASE LINE 86

Carcase height 86,25 cm 24. Chapter

AVANCE-CARCASE LINE 80

Carcase height 79,5 cm 26. Chapter

1/2022 2.
 CONTINO
Floor units – type logic

Article definition Dimension definition Front definition/

CONTINO | AVANCE

function equipment
Floor units

Floor unit Width / Height / Depth* S2 drawer (2x)

Z pullout (1x)
2.
CT 60 80 * S2Z
CT 60 80 S2Z
* depth only if different from standard 58 cm

Sink unit Width / Height / Depth* Z2 pullout (2x)

W waste disposal system

CTSP 80 80 68 Z2W
CTSP 80 80 68 Z2W
* depth only if different from standard 58 cm

Floor unit blender Width / Height

CTP 20 80
CTP 20 80

Article definition Article definition Front definition / function equipment

CFT front part AFT front part B blender

CRW rear panel in original style (grip handle) AGFT original front, partly integrated BR bread cupboard
CT floor unit AGFV original front, fully integrated BS BLANCOSELECT waste disposal system
CTE corner floor unit ARW back panel in original front style D swivel shelves
CTED diagonal corner floor unit 135º AT floor unit DF Downdraft extractor
CTEDSP diagonal sink corner floor unit 135º ATE corner unit / carousel F bottle cupboard/ shelf
CTEE corner floor unit, inserted ATED diagonal corner unit 135º G front divided
CTEESP corner sink unit, inserted ATEDSP diagonal sink corner floor unit 135º H towel unit/ shelf
CTH hob unit ATEE corner floor unit, inserted IS interior drawer
CTK hob unit ATEESP sink corner floor unit, inserted IZ interior pullout
CTP floor unit blender ATH hob unit K carousel
CTPE floor unit corner blender ATK Hob unit K basket
CTPEW floor unit corner blender 135º ATP floor unit blender LM LeMans-swivel shelf
CTQ hot water-towel cupboard ATPE floor unit corner blender N Niche door
CTSP sink unit ATPEW floor unit corner blender 135º S drawer
CTSS floor unit with sliding door ATSP sink floor unit SO plinth drawer
CTW floor unit end panel with grip handle ATW floor unit end panel with grip handle T2 2 sliding doors
CTWI island end panel with grip handle ATWI island end panel with grip handle TV table ventilator prepared
CGFV original front T3R floor shelf unit V variable (on-site waste disposal system)
TR floor shelf unit W waste disposal system
T3R floor shelf unit WH waste disposal system with tall
waste container
Z pullout
ZR pullout frame

2. 1/2022
CONTINO Corner solutions
Planning tips

90° Corner solutions A

with inserted corner floor units Floor space according to door width
105 (102 - 118 cm)
110 (107 - 123 cm)
65 cm
Inserted corner floor units can be planned in a cupboard run 115 (112 - 128 cm)
125 (122 - 138 cm)
via the door width as dimensional compensation. They have a
1,7 cm
pre-defined floor space with a fixed interior blender and a corner
blender CTPEEW 7 (7.3 X 7.3 CM). By altering the leg length of 100 cm
the corner blender, floor space A and planning depth B can
be adjusted. The corner floor unit is positioned with a clearance B 56 cm
of 1.7 cm. Please state the exact measurements on the order, the 65
65cm
cm
(Standard)
leg lengths are adjusted at the factory.
7,3 cm
Please note: the leg lengths of the corner blender are available
from 4 cm – 10 cm width. For widths of more than 10 cm there 0,2 cm
1,8 - 2,1 cm
7,3 cm
will be an extra charge MP TP 5 (calculated for each started 5 Door width
cm per leg length). 40 cm
45 cm
50 cm
60 cm
1,7 cm

With CTEE 100 ... LM an opening angle of 90° is essential.

Attention! Protruding cupboards can not be used in the opening
area.
Possible door widths 45 cm, 50 cm (standard) and 60 cm.
Please pay attention to the pivoting range.
61 / 71 / 73 cm

Opening area
CTEE 100 ... LM

69 / 81 / 91 cm

90°-Corner solution with carousel corner unit 81,7 80

91,7 1,7 90
1,7
Carousel corner units for CONTINO are planned with a space of
81.7 cm or 91.7 cm from the corner. 34 7,7
0,2
7,7 1,8-2,1
Wall unit planning: 81,7
91,7
For an accurate wall unit run, plan the corner wall unit 0,2
1,8-2,1 40
COEE ... also at 1.7 cm from the corner.
50

80 x 80
90 x 90 Wall unit planning
1,7

135° Corner solution with diagonal corner unit 91,7 1,7 90

1,7 1,7
With CONTINO, diagonal corner units are planned with a spacial
positioning of 81.7 cm or 91.7 cm from the corner! This type of
unit has a corner blender on the front. A change of the blender 60 0,2 1,8-2,1
measurement, if required, enables a size adjustment for the con- 91,7
34
necting cupboard run. (Extra charge for blender enlarging). 0,2 1,8-2,1
The plinth cover VSFD ... is used.
56 31,7

Wall unit planning:

90 x 90
For planning an accurate cupboard run with diagonal corner units, 1,7
a spacial positioning of 1.7 cm because of width enlargement of Wall unit planning
the connection wall units, must be observed.

1/2022 2.01
AVANCE Corner solutions
Planning tips

90° Corner solutions A

with inserted corner floor units Floor space according to door width
105 (102 - 118 cm)
110 (107 - 123 cm)
65 cm
Inserted corner floor units can be planned in a cupboard run 115 (112 - 128 cm)
125 (122 - 138 cm)
via the door width as dimensional compensation. They have a
pre-defined floor space with a fixed interior blender and a corner 1,7 cm

blender ATPEEW 7 (7.3 X 7.3 CM). By altering the leg length of 100 cm
the corner blender, floor space A and planning depth B can
be adjusted. The corner floor unit is positioned with a clearance B 56 cm
of 1.7 cm. Please state the exact measurements on the order, the 65
65cm
cm
leg lengths are adjusted at the factory. (Standard)
7,3 cm
Please note: the leg lengths of the corner blender are available
from 4 cm – 10 cm width. For widths of more than 10 cm there 0,2 cm
1,8 - 2,1 cm
will be an extra charge MP TP 5 (calculated for each started 5 7,3 cm
Door width
cm per leg length). 40 cm
45 cm
50 cm
60 cm
1,7 cm

With ATEE 100 ... LM an opening angle of 90° is essential.

Attention! Protruding cupboards can not be used in the opening
area.
Possible door widths 45 cm, 50 cm (standard) and 60 cm.
Please pay attention to the pivoting range.
61 / 71 / 73 cm

Opening area
ATEE 100 ... LM

69 / 81 / 91 cm

90°-Corner solution with carousel corner unit 81,7 80

91,7 1,7 90
1,7
Carousel corner units for AVANCE are planned with a space of
81.7 cm or 91.7 cm from the corner. 34 7,7
0,2
7,7 1,8-2,1
Wall unit planning: 81,7
91,7
For an accurate wall unit run, plan the corner wall unit 0,2
1,8-2,0 40
AOEE ... also at 1.7 cm from the corner.
50

80 x 80
90 x 90 Wall unit planning
1,7

135° Corner solution with diagonal corner unit 91,7 1,7 90

1,7 1,7
With AVANCE, diagonal corner units are planned with a spacial
positioning of 81.7 cm or 91.7 cm from the corner! This type of
unit has a corner blender on the front. A change of the blender 60 0,2 1,8-2,0
measurement, if required, enables a size adjustment for the con- 91,7
34
necting cupboard run. (Extra charge for blender enlarging). 0,2 1,8-2,0
The plinth cover VSFD ... is used.
56 31,7

Wall unit planning:

90 x 90
For planning an accurate cupboard run with diagonal corner units, 1,7
a spacial positioning of 1.7 cm because of width enlargement of Wall unit planning
the connection wall units, must be observed.

2.02 1/2022
CONTINO

Floor units
Floor units, carcase height 73.0 cm

CONTINO

73.0 cm
20.

CARCASE LINE 73

Floor units Function cupboards Corner units Housing units Appliance fronts

20.01 20.02 20.03 20.05 20.08

T: 36 / 48 / 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm CGFV 45 73
CT 15 73 CT 15 73 ZR CTEE 105 73 CTH 60 73 Z CGFV 60 73
CT 20 73 CTEE 110 73 3,5 CTH 61 73 Z CGFV 45 73 M
CT 30 73 CTEE 115 73 CTH 76 73 Z CGFV 60 73 M
CT 40 73 CTEE 125 73
CT 45 73
69,5

69,5
69,5 27,5 69,5
CT 50 73
CT 60 73
20.01 20.02 20.04 20.05 20.08
T: 36 / 48 / 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm CGFV 60 73 61 GZ2
CT 80 73 CT 15 73 ZH CTEE 115 73 D CTH 60 73 S
CT 90 73 3,5

26,25
CT 100 73
CT 120 73

69,5
69,5 69,5 13,0 39,75

20.01 20.02 20.04 20.05

20.09 20.08
T: 36 / 48 / 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm CGFV 60 73 61
CT 30 73 IS2IZ CT 15 73 H CTEE 110 73 LM CTH 60 73 GS2Z
CT 40 73 IS2IZ CT 20 73 H CTEE 115 73 LM 5,25 CTH 76 73 13,0
13,0
CT 45 73 IS2IZ CT 30 73 H CTEE 125 73 LM CTH 91 73
CT 50 73 IS2IZ
CT 60 73 IS2IZ
69,5

69,5

69,5 39,75

20.01 20.02 20.04 20.05 20.08

T: 36 / 48 / 58 / 68 cm T: 36 / 48 / 58 / 68 cm T: 58 cm T: 58 / 68 cm CGFV 60 73 61
CT 80 73 IS2IZ CT 20 73 GVZ CTE 82 73 K 3,5
CTH 60 73 SO
CT 90 73 IS2IZ CT 30 73 GVZ
CT 100 73 IS2IZ
69,5

69,5 13,0 69,5

69,5

20.01 20.02 20.04 20.08

T: 58 / 68 cm T: 58 / 68 cm T: 58 cm CGFV 60 73 61 Z2
CT 30 73 ZIZ CT 30 73 ZRK CTE 92 73 K
CT 40 73 ZIZ 26,25
CT 45 73 ZIZ
CT 50 73 ZIZ
CT 60 73 ZIZ
69,5

69,5 69,5
Hob units 39,75

20.01 20.02 20.04 20.05 20.08

T: 58 / 68 cm T: 58 / 68 cm T: 58 cm T: 58 / 68 cm CGFV 60 73 61 S2Z
CT 30 73 ZIS2 CT 30 73 ZBR CTED 92 73 K CTK 60 73 Z2
CT 40 73 ZIS2 CTK 80 73 Z2
13,0
13,0
CT 45 73 ZIS2 26,25 CTK 90 73 Z2
CT 50 73 ZIS2 CTK 100 73 Z2
69,5 CT 60 73 ZIS2 69,5 CTK 120 73 Z2 39,75
69,5

39,75

20.01 20.03 20.05 20.08

T: 36 / 48 / 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm C1GFV 60 73 Z2
CT 30 73 Z2 CT 30 73 ZISF CTK 60 73 S2Z C1GFV 60 73 Z2M
CT 40 73 Z2 13,0 CTK 80 73 S2Z 26,25
26,25 CT 45 73 Z2 13,0 CTK 90 73 S2Z
CT 50 73 Z2 CTK 100 73 S2Z
39,75
CT 60 73 Z2 69,5 CTK 120 73 S2Z 43,0
39,75
CT 80 73 Z2
CT 90 73 Z2
CT 100 73 Z2
CT 120 73 Z2 20.03 20.07 20.09
T: 58 / 68 cm T: 58 / 68 cm C1GFV 60 73 S2Z
20.02
CT 30 73 ZIS2K CT 80 73 BSZ TV C1GFV 60 73 S2ZM
T: 36 / 48 / 58 / 68 cm 13,0
13,0 CT 90 73 BSZ TV 13,0
CT 30 73 Z2IS 13 CT 100 73 BSZ TV
CT 40 73 Z2IS CT 120 73 BSZ TV
26,25 CT 45 73 Z2IS 39,75
CT 50 73 Z2IS 69,5 43,0

39,75
CT 60 73 Z2IS
CT 80 73 Z2IS
CT 90 73 Z2IS 20.03
CT 30 73 N 20.07 T: 58 / 68 cm C1GFV 60 73 61 Z2
CT 100 73 Z2IS CT 40 73 N CT 80 73 Z2 TV
CT 120 73 Z2IS CT 45 73 N CT 90 73 Z2 TV 26,25
20.02 CT 50 73 N 26,25 CT 100 73 Z2 TV
T: 36 / 48 / 58 / 68 cm CT 60 73 N CT 120 73 Z2 TV
CT 30 73 S2Z
69,5

39,75 43,0
13,0 CT 40 73 S2Z
13,0 CT 45 73 S2Z
CT 50 73 S2Z
39,75
CT 60 73 S2Z 20.03 T: 58 / 68 cm 20.09
C1GFV 60 73 61
CT 80 73 S2Z CTSS 120 73 T2 S2Z
CT 90 73 S2Z CTSS 160 73 T2 13,0
CT 100 73 S2Z CTSS 180 73 T2 13,0
CT 120 73 S2Z
43,0
69,5

1/2022 20.
 CONTINO
Floor units

Floor units, carcase height 73.0 cm

CONTINO

73.0 cm

T: Cupboard depth cm

20.

CARCASE LINE 73

Sink units Waste bin units Carcase height 17 cm

20.09 T: 58 / 68 cm 20.12 T: 58 / 68 cm 20.14 T: 58 / 68 cm 20.15 T: 36 / 48 / 58 / 68 cm

CTSP 45 73 CTSPA 90 73 TZ CT 30 73 ZWH CT 30 17 S
CTSP 50 73 CTSPQ 100 73 TZ CT 40 73 ZWH CT 40 17 S
CTSP 60 73 13,0 CT 45 17 S
CT 50 17 S
69,5

CT 60 17 S
69,5

69,5
CT 80 17 S
CT 90 17 S
CT 100 17 S
20.09 T: 58 / 68 cm 20.13 T: 58 / 68 cm 20.14 T: 58 / 68 cm CT 120 17 S
CTSP 80 73 CTSPA 80 73 TZW CT 45 73 ZWH
CTSP 90 73 CTSPQ 90 73 TZW CT 50 73 ZWH
CTSP 100 73
CTSP 120 73
69,5

69,5
69,5 Carcase height 43 cm

20.09 T: 58 / 68 cm 20.13 T: 58 / 68 cm 20.14 T: 58 / 68 cm 20.16 T: 36 / 48 / 58 / 68 cm

CTSP 45 73 ZV CTSPA 90 73 TZW CT 60 73 ZWH CT 30 43
CTSP 50 73 ZV CTSPQ 100 73 TZW CT 40 43
CTSP 60 73 ZV CT 45 43
CT 50 43
69,5

39,75
69,5 69,5 CT 60 43

20.10 T: 58 / 68 cm 20.13 T: 58 / 68 cm 20.16 T: 36 / 48 / 58 / 68 cm

CTSP 45 73 Z CTSPA 90 73 TZBS CT 80 43
CTSP 50 73 Z CTSPQ 100 73 CT 90 43
CTSP 60 73 Z TZBS CT 100 43
CT 120 43
69,5

39,75
69,5
Shelves

20.10 T: 58 / 68 cm 20.15 T: 36 / 58 cm 20.16 T: 36 / 48 / 58 / 68 cm

CTSP 50 73 ZW TR 30 73 CT 30 43 Z
TR 40 73 CT 40 43 Z
TR 45 73 CT 45 43 Z
TR 50 73 CT 50 43 Z
39,75
TR 60 73 CT 60 43 Z
69,5
Corner sink units TR 90 73 CT 80 43 Z
CT 90 43 Z
CT 100 43 Z
20.10 T: 58 / 68 cm 20.14 T: 58 / 68 cm 20.15 T: 36 / 58 cm CT 120 43 Z
CTSP 60 73 ZW CTEESP 105 73 T3R 30 73 20.16
CTEESP 110 73 T3R 60 73 T: 58 / 68 cm
CTEESP 115 73 T3R 90 73 CTSP 60 43 Z
CTEESP 125 73 CTSP 90 43 Z
CTSP 120 43 Z
69,5

69,5
39,75

20.10 T: 58 / 68 cm 20.14 T: 58 cm
CTSP 60 73 ZBS CTEDSP 92 73

69,5
69,5

20.10 T: 58 / 68 cm
CTSP 50 73 Z2
CTSP 60 73 Z2
26,25

39,75

20.10 T: 58 / 68 cm
CTSP 80 73 Z2
CTSP 90 73 Z2
26,25 CTSP 100 73 Z2
CTSP 120 73 Z2
39,75

20.11 T: 58 / 68 cm
CTSP 50 73 Z2W
26,25

39,75

20.11 T: 58 / 68 cm
CTSP 60 73 Z2W
26,25

39,75

20.11 T: 58 / 68 cm
CTSP 80 73 Z2W
CTSP 90 73 Z2W
26,25 CTSP 100 73 Z2W
CTSP 120 73 Z2W
39,75

20.12 T: 58 / 68 cm
CTQ 60 73

69,5

20. 1/2022
 Price group
Floor units
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Floor unit Carcase depth 56 cm
1 door CT1573 L/R 15 201 216 231 267 287 306 340 370
2 adjustable shelves CT2073 L/R 20 201 216 231 267 287 306 340 370
CT3073 L/R 30 201 216 231 267 287 306 340 370
69,5

CT4073 L/R 40 211 223 241 282 302 325 363 397
CT4573 L/R 45 216 229 242 285 310 336 376 409
Diagram shows L CT5073 L/R 50 218 235 245 288 318 349 390 425
CT6073 L/R 60 226 242 265 307 345 379 420 458

Floor unit Carcase depth 56 cm

2 doors CT8073 80 297 317 360 421 474 526 589 643
2 adjustable shelves CT9073 90 308 333 369 440 495 550 611 667
CT10073 100 316 340 379 454 512 569 630 687
120 cm unit with centre post. CT12073 120 336 358 399 484 566 608 671 732
69,5

Floor unit Carcase depth 56 cm

1 door CT3073IS2IZ L/R 30 408 420 436 472 493 514 546 595
2 inner drawers CT4073IS2IZ L/R 40 420 432 453 491 514 535 575 627
1 inner pullout CT4573IS2IZ L/R 45 428 443 459 500 525 550 592 645
69,5

CT5073IS2IZ L/R 50 435 454 466 509 538 570 609 664
CT6073IS2IZ L/R 60 449 466 484 530 569 603 643 700
Diagram shows L
Exchange wide angle hinge ANIGE 0
through standard hinge, with spacer strip

Floor unit Carcase depth 56 cm

2 doors CT8073IS2IZ 80 578 599 642 701 755 808 870 949
2 inner drawers CT9073IS2IZ 90 604 627 664 734 790 843 904 985
1 inner pullout CT10073IS2IZ 100 618 642 681 755 813 870 933 1017
69,5
Exchange wide angle hinge ANIGD 0
through standard hinge, with spacer strip
both sides

Pullout unit Carcase depth 56 cm

1 pullout CT3073ZIZ 30 420 440 454 493 527 564 621 677
1 inner pullout CT4073ZIZ 40 429 449 462 510 551 594 659 719
CT4573ZIZ 45 433 452 466 514 559 605 673 734
69,5 CT5073ZIZ 50 437 460 472 521 571 618 690 752
CT6073ZIZ 60 448 469 483 535 591 646 726 792

Inner pullout exchange ANISIZ 0

instead of 1 inner pullout
1 inner drawer will be supplied.

Pullout unit Carcase depth 56 cm

1 pullout CT3073ZIS2 30 485 508 521 559 595 629 689 751
2 inner drawers CT4073ZIS2 40 496 515 528 577 618 661 726 792
CT4573ZIS2 45 503 520 533 581 627 671 741 808
69,5 CT5073ZIS2 50 509 528 540 589 640 689 760 828
CT6073ZIS2 60 518 539 553 605 661 716 796 868

Pullout unit Carcase depth 56 cm

26,25 2 pullouts CT3073Z2 30 429 450 463 504 538 574 634 691
CT4073Z2 40 437 458 470 520 564 605 671 732
CT4573Z2 45 443 460 474 523 571 616 688 750
39,75 CT5073Z2 50 448 468 481 530 581 631 704 767
CT6073Z2 60 457 479 493 546 603 659 740 807
CT8073Z2 80 575 610 624 714 804 893 1007 1099
CT9073Z2 90 611 642 677 753 849 944 1054 1149
C1 CT10073Z2 100 639 659 695 780 873 962 1077 1176
CT12073Z2 120 642 668 723 802 894 986 1095 1193

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 20.01
 Price group
Floor units
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Pullout unit Carcase depth 56 cm
1 pullout with drawer pan CT3073Z2IS 30 489 509 515 564 594 622 666 726
26,25
1 inner drawer CT4073Z2IS 40 499 519 526 580 616 651 694 756
1 pullout CT4573Z2IS 45 504 523 533 587 626 662 708 772
39,75 CT5073Z2IS 50 506 526 537 604 639 674 726 792
CT6073Z2IS 60 518 537 553 619 661 699 750 818
CT8073Z2IS 80 669 704 722 784 857 932 1139 1242
CT9073Z2IS 90 696 736 756 823 906 987 1197 1304
C1 CT10073Z2IS 100 735 776 802 871 962 1053 1264 1378
CT12073Z2IS 120 763 808 839 909 1009 1109 1320 1439

Pullout unit Carcase depth 56 cm

13,0 2 drawers CT3073S2Z 30 489 509 515 564 594 622 666 726
13,0
1 pullout CT4073S2Z 40 499 519 526 580 616 651 694 756
CT4573S2Z 45 504 523 533 587 626 662 708 772
39,75 CT5073S2Z 50 506 526 537 604 639 674 726 792
CT6073S2Z 60 518 537 553 619 661 699 750 818
CT8073S2Z 80 669 704 722 784 857 932 1139 1242
CT9073S2Z 90 696 736 756 823 906 987 1197 1304
C1 CT10073S2Z 100 735 776 802 871 962 1053 1264 1378
CT12073S2Z 120 763 808 839 909 1009 1109 1320 1439

Price group
Function floor units
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit Carcase depth 56 cm
1 pullout (depth 50 cm) CT1573ZR 15 393 410 427 468 489 509 546 595
2 metal boards each with
2 divisions
69,5

Towel unit Carcase depth 56 cm

with ventilation holes in the rear wall CT1573ZH 15 405 424 440 482 503 520 557 607
1 pullout (depth 50 cm)
1 extending towel rail
69,5 2-rods, chromed
(installation depth 50 cm)
1 metal board

Towel unit Carcase depth 56 cm

with ventilation holes in the rear wall CT1573H L/R 15 232 243 263 301 320 338 374 406
1 door CT2073H L/R 20 232 243 263 301 320 338 374 406
1 extending towel rail chromed CT3073H L/R 30 232 243 263 301 320 338 374 406
69,5 (installation depth 50 cm)
Diagram shows L
For 15 cm width with 2 towel rails,
from 20 cm width with 3 towel rails.

Pharmacy floor unit Carcase depth 56 cm

1 large capacity pullout with front panel CT2073GVZ 20 417 429 448 482 504 522 555 587
guided on 1 pullout and CT3073GVZ 30 417 429 448 482 504 522 555 587
1 drawer
69,5 1 inner drawer

Storage unit Carcase depth 56 cm

1 pullout (depth 50 cm) CT3073ZRK L/R 30 425 443 459 503 521 540 576 628
2 wire baskets
1 drop-in tray
69,5
Max. load capacity 16 kg per pullout.
Diagram shows L

Bread cupboard Carcase depth 56 cm

1 pullout CT3073ZBR 30 523 547 565 611 634 656 688 750
1 frame with bread bag
for long french loaves
69,5 1 bottle arrangement

20.02 1/2022
 Price group
Function floor units
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Bottle cupboard Carcase depth 56 cm
1 pullout CT3073ZISF 30 503 519 521 564 582 600 624 680
1 inner drawer
1 removable wire basket
69,5 holding 8 bottles

Storage unit Carcase depth 56 cm

1 pullout CT3073ZIS2K 30 550 572 581 635 664 691 733 798
2 inner drawers
2 removable baskets
69,5

Niche door CT3073N L/R 30 204 211 234 260 283 304 343 374
1 door with attached plinth CT4073N L/R 40 207 215 240 272 295 318 358 391
1 recessed handle below the worktop CT4573N L/R 45 207 220 241 274 298 325 364 398
no rear panel CT5073N L/R 50 208 223 247 278 305 336 374 406
69,5

no floor CT6073N L/R 60 214 229 256 287 321 354 401 439

Diagram shows L Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.

Floor unit with sliding doors Carcase depth 56 cm

consisting of: CTSS12073T2 120 1304 1325 1354 1415 1459 1504 1560 1701
2 sliding doors on one front level CTSS16073T2 160 1418 1438 1472 1544 1596 1649 1712 1867
100% opening width CTSS18073T2 180 1499 1524 1564 1646 1706 1766 1841 2005
1 carcase, left in half the planning width
Cupboard width 120, 160, 180 cm:
69,5 1 carcase, right in half the planning width
Not available in IOS-C, IOS-M-C
2 adjustable shelves per carcase
1 fitting-set for on-site installation

Inner drawers and inner pullouts are possible.

Sliding doors in closed position on one level.
The cupboard is supplied in separate modules.
Width alterations not possible!
VB and AN TU 85 not possible.

Price group
Corner floor units
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Corner floor unit Carcase depth 56 cm
Planning depth 65 resp. 75 cm Door width 40 cm
Actual space 105 (102 up to 118 cm) CTEE10573 L/R 100 404 435 479 564 630 695 763 832
Door width 45 cm
Actual space 110 (107 up to 123 cm) CTEE11073 L/R 100 404 435 479 564 630 695 763 832
69,5

Door width 50 cm
Actual space 115 (112 up to 128 cm) CTEE11573 L/R 100 404 435 479 564 630 695 763 832
Diagram shows L
Door width 60 cm
Actual space Actual space 125 (122 up to 138 cm) CTEE12573 L/R 100 482 513 557 642 708 773 841 910
1.7 1 door
Pl.depth

56/66 2 adjustable shelves

100 1 inner blender with angle blender CTPEEW773 7 0 0 0 0 0 0 0 0
7.3 adjustable from 4 to 10 cm
Door width Extra charge per 5 cm additional CMPTP5 5 6 8 8 8 11 14 14 16
width (up to max. 20 cm)

Please note: when placing an order, it is imperative to specify the actual floor measurement, the angle blender CTPEEW 7 .. is adapted at factory.
The legs of the angle blender are free to choose from 4 - 10 cm width. For more than 10 cm please note extra charge MP TP 5.

1/2022 20.03
 Price group
Corner floor units
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Corner floor unit Carcase depth 56 cm
Planning depth 65 resp. 75 cm CTEE11573D L/R 100 574 611 653 742 811 878 943 1029
Actual space 115 (112 up to 128 cm)
1 door, 50 cm wide
2 semi-circular swing-out shelves
69,5

with chromium plated railing

1 inner blender with angle blender CTPEEW773 7 0 0 0 0 0 0 0 0
Diagram shows L
adjustable from 4 to 10 cm
Actual space Extra charge per 5 cm additional CMPTP5 5 6 8 8 8 11 14 14 16
1.7 width (up to max. 20 cm)
Pl.depth

56/66
100
7.3
Door width

Corner floor unit Carcase depth 56 cm

Planning depth 65 resp. 75 cm Door width 45 cm
Actual space 110 (107 up to 123 cm) CTEE11073LM L/R 100 879 916 957 1045 1114 1181 1246 1358
Door width 50 cm
Actual space 115 (112 up to 128 cm) CTEE11573LM L/R 100 879 916 957 1045 1114 1181 1246 1358
69,5

Door width 60 cm
Actual space 125 (122 up to 138 cm) CTEE12573LM L/R 100 987 1024 1065 1153 1222 1289 1354 1466
Diagram shows L
1 door
Actual space 2 height adjustable swing-out shelves
1.7
with chromium plated railing
2 rotating shelf cushionings
Pl.depth

56/66
100 for installation on site
7.3 1 inner blender with angle blender CTPEEW773 7 0 0 0 0 0 0 0 0
Door width adjustable from 4 to 10 cm
Extra charge per 5 cm additional CMPTP5 5 6 8 8 8 11 14 14 16
width (up to max. 20 cm)

Carousel floor unit Carcase depth 56 cm

Floor dimensions 81.7 x 81.7 cm CTE8273K 80 737 764 779 885 933 979 1032 1125
1 swivel door, self adhesive
1 carousel 360° revolving
69,5

2 rotating shelves with metal railing,

chromium plated plus dividers,
80 upper shelf height adjustable
56,6

Special handle solution see page 10.10.

On request supplied unassembled.
Not possible with worktops less than 3 cm thickness.
80
56,6

Carousel floor unit Carcase depth 56 cm

Floor dimensions 91.7 x 91.7 cm CTE9273K 90 811 846 866 983 1038 1094 1157 1261
1 swivel door, self adhesive
1 carousel 360° revolving
69,5

2 rotating shelves with metal railing,

chromium plated plus dividers,
90 upper shelf height adjustable
66,6

Special handle solution see page 10.10.

On request supplied unassembled.
90

Not possible with worktops less than 3 cm thickness.

66,6

Diagonal corner unit 135° Carcase depth 56 cm

Floor dimensions 91.7 x 91.7 cm CTED9273K L/R 90 739 771 797 851 889 924 974 1062
1 door, 40 cm wide
Not available in IOS-C, IOS-M-C
2 corner blenders
1 carousel 360° revolving
69,5

2 rotating shelves with metal

Diagram shows L
railing and adjustable divisions

90 On request supplied unassembled.

66
90
66

,5
39

Please note: when placing an order, it is imperative to specify the actual floor measurement, the angle blender CTPEEW 7 .. is adapted at factory.
The legs of the angle blender are free to choose from 4 - 10 cm width. For more than 10 cm please note extra charge MP TP 5.

20.04 1/2022
 Price group
Built-under oven/microwave housing units
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

3,5 Built-under oven/microwave housing unit Carcase depth 56 cm
1 blender CTH6073Z 60 387 405 419 451 480 512 540 588
1 niche max. CTH6173Z 61 399 417 431 463 495 526 556 606
width: 56.5 / 57.7 / 72.5 cm CTH7673Z 76 405 424 443 473 510 542 574 626
27,5 height: 38 cm
Cupboard width 60, 61, 76 cm:
1 pullout
Not available in IOS-C, IOS-M-C
Front with chamfered edge at the bottom for opening.
Plan optional opening support HFO3.

3,5 Built-under oven housing unit Carcase depth 56 cm

1 blender CTH6073S 60 321 335 348 376 397 417 439 477
1 niche max. 56.5 x 52 cm
Not available in IOS-C, IOS-M-C
1 drawer
13,0
Front with chamfered edge at the bottom for opening.
Plan optional opening support HFO3.
Plinth steps not possible.

5,25 Built-under oven housing unit Carcase depth 56 cm

1 blender CTH6073 60 152 154 162 172 204 235 247 272
1 niche max. CTH7673 76 188 200 218 237 247 260 286 311
width: 56.5 / 72.5 / 88 cm CTH9173 91 297 313 335 369 389 404 440 479
height: 64 cm

3,5 Built-under oven housing unit Carcase depth 56 cm

1 blender CTH6073SO 60 327 341 356 386 405 425 448 486
1 niche max. 56.5 x 52 cm
1 plinth drawer (installation depth 50 cm)
13,0
Only for plinth height 10 cm possible.
No adjustable plinth legs.

When installed near a corner situation allowances must be made for drawers and pullouts in the adjacent corner to avoid fouling cooker knobs and handles
increase corner blender width.

Programme TOCCO-C one-sided with thick edge at widths of 61, 76 and 91 cm.

Price group
Hob units
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Hob unit Carcase depth 56 cm

26,25 1 protective screen CTK6073Z2 60 510 535 547 600 658 712 795 868
2 pullouts CTK8073Z2 80 628 664 678 767 857 947 1060 1156
CTK9073Z2 90 666 696 732 810 904 997 1111 1209
39,75 Control panel on top. CTK10073Z2 100 692 713 750 833 923 1016 1131 1233
CTK12073Z2 120 695 723 777 855 949 1039 1148 1253
C1

Hob unit Carcase depth 56 cm

13,0 1 protective screen CTK6073S2Z 60 572 592 608 674 713 753 805 878
13,0
2 drawers CTK8073S2Z 80 724 758 776 839 912 986 1193 1301
1 pullout CTK9073S2Z 90 751 791 811 878 960 1041 1252 1365
39,75 CTK10073S2Z 100 790 830 856 925 1016 1107 1318 1437
Control panel on top. CTK12073S2Z 120 817 860 893 963 1064 1164 1374 1499
C1

Planning tips
Floor units with drawers will be given a cable protection on request, for use with hobs with sensor control above.
Please plan in addition the cable protection e.g. AN MU.

1/2022 20.05
 Price group
Hob units
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Recessed handle cut-out ANTKGAUS 44
for ventilation of induction hobs
Air gap 0.5 cm underneath worktop
max. length of the recessed handle 310 cm

Cupboard with drawer above, ANMU 57

prepared for hob
Protective cable shelf, removable

Necessary to state appliance.

Cut-out floor unit side ANMU2S 43

cutout 50 x 4.2 cm at the
side upper edge

For hobs across several cupboards.

Blender instead of drawer ANBLS 0

Blender factory drilled ANBLBO 53 53 53 53 53 53 53 53

Blender has holes for control knobs
Not available in IOS-C, IOS-M-C
Please state hob type, accessories for hob,
worktop and worktop thickness.

Blender factory drilled ANBLBO1 53 53 53 53 53 53 53 53

7 drill holes (5x operating knob, 2x socket)
Not available in IOS-C, IOS-M-C
50 mm diameter.
Placed on the blender in height and width.
Suitable for Bora Professional.

Specify deviations in drill hole diameter and

placement in the order!

Blender factory drilled ANBLBO2 53 53 53 53 53 53 53 53

5 drill holes for operating knobs 50 mm diameter.
Not available in IOS-C, IOS-M-C
Placed on the blender in height and width.
Suitable for Bora Professional.

Specify deviations in drill hole diameter and

placement in the order!

Blender factory drilled ANBLBO3 53 53 53 53 53 53 53 53

2 drill holes 50 mm diameter for Bora sockets.
Not available in IOS-C, IOS-M-C
Placement on the blender 100 mm each from
the outside.

Specify deviations in drill hole diameter and

placement in the order!

Blender factory drilled ANBLBOGL - - - - - 211 - -

Blender has holes for control knobs
Available in IOS-C, IOS-M-C
Please state hob type, accessories for hob,
worktop and worktop thickness.

Blender factory drilled ANBLBOGL1 - - - - - 211 - -

7 drill holes (5x operating knob, 2x socket)
Available in IOS-C, IOS-M-C
50 mm diameter.
Placed on the blender in height and width.
Suitable for Bora Professional.

Specify deviations in drill hole diameter and

placement in the order!

20.06 1/2022
 Price group
Hob units
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Blender factory drilled ANBLBOGL2 - - - - - 211 - -
5 drill holes for operating knobs 50 mm diameter.
Available in IOS-C, IOS-M-C
Placed on the blender in height and width.
Suitable for Bora Professional.

Specify deviations in drill hole diameter and

placement in the order!

Blender factory drilled ANBLBOGL3 - - - - - 211 - -

2 drill holes 50 mm diameter for Bora sockets.
Available in IOS-C, IOS-M-C
Placement on the blender 100 mm each from
the outside.

Specify deviations in drill hole diameter and

placement in the order!

Floor unit prepared for under-floor ANTILGER 145

extractor
The cupboard is prepared with the necessary
appliance clearance below the hob.
Rear wall construction is prepared for the
respective appliance requirements.
The lower pullout is shortened, depending on
the choice of appliance.

Essential to state appliance and planning-relevant

accessories required, e.g. recirculating air, extraction,
air circulation unit, sound absorber etc.

Floor unit prepared for table Carcase depth 56 cm

13,0 ventilator CT8073BSZTV 80 696 732 750 812 886 960 1167 1275
13
1 blender CT9073BSZTV 90 798 838 857 923 1006 1088 1299 1412
1 drawer CT10073BSZTV 100 835 878 903 972 1063 1154 1364 1482
39,75 1 pullout CT12073BSZTV 120 863 909 940 1010 1111 1211 1421 1545
Back wall can be removed from the
C1
cupboard interior.
10

Pullout depth 40 cm for cupboard depth 58 cm.

Pullout depth 50 cm for cupboard depth 68 cm.

Floor unit prepared for table Carcase depth 56 cm

ventilator CT8073Z2TV 80 634 670 683 773 864 953 1067 1158
26,25
2 pullouts CT9073Z2TV 90 671 701 737 813 909 1003 1114 1209
Back wall can be removed from the CT10073Z2TV 100 698 719 755 840 932 1022 1137 1235
39,75 cupboard interior. CT12073Z2TV 120 701 728 782 862 954 1046 1154 1253
C1
Pullout depth 40 cm for cupboard depth 58 cm.
10
Pullout depth 50 cm for cupboard depth 68 cm.

The cupboard is prepared with the necessary space for the appliance underneath the hob.
It is dimensionally tailored to the following appliances:
BORA: BHA, BFIA, PURA, PUXA
MIELE: KMDA - Series
BERBEL: BKF83DLP
ELICA: NIKOLATESLA
NOVY: UP, UPSIDE, ONE
AEG: COMBOHOB - 2 in 1 hob-extractor-combination
By pulling forward the back wall, there is no need for leaving space for an exhaust air duct.
Please note worktop depth of at least 60 cm.
Minimum plinth height 10 cm!

1/2022 20.07
 Price group
Fronts for built-under appliances
Carcase height 73.0 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Original front for refrigerators
with standard recessed handle above CGFV4573 L/R 45 91 104 127 155 181 211 248 273
For fully integrated dishwasher and CGFV6073 L/R 60 99 114 142 174 208 239 276 299
for integrated built-under fridges,
height 82 cm. for dishwashers
CGFV4573M 45 91 104 127 155 181 211 248 273
69,5 With plinth height smaller 14 cm and appliances CGFV6073M 60 99 114 142 174 208 239 276 299
larger 82 cm with special handle.
Special handle solution see page 10.09.
Please state appliance model on order!
Appliance plinth base not necessary.

Original front with CGFV607361GZ2 60 231 243 276 303 339 370 405 444
pullout partitioning
26,25

with standard recessed handle above

For fully integrated dishwasher,
height 82 cm.
39,75
With plinth height 14 cm possible.
Please state appliance model on order!
Appliance plinth base not necessary.

Original front with CGFV607361GS2Z 60 265 283 313 352 391 431 506 550
drawer- and pullout partitioning
13,0
13,0
with standard recessed handle above
For fully integrated dishwasher,
height 82 cm.
39,75
With plinth height 14 cm possible.
Please state appliance model on order!
Appliance plinth base not necessary.

Original front CGFV607361 60 154 169 195 229 261 294 329 358
with original recessed handle on front above
If necessary, flush-with-carcase blender
behind the front
for fully integrated dishwasher,
height 82 - 87 cm.
69,5

Original front with CGFV607361Z2 60 231 243 276 303 339 370 405 444
pullout partitioning
26,25 with original recessed handle on the front
If necessary, flush-with-carcase blender
behind the front
39,75 for fully integrated dishwasher,
height 82 - 87 cm.

Original front with CGFV607361S2Z 60 265 283 313 352 391 431 506 550
13,0 drawer- and pullout partitioning
13,0 with original recessed handle on the front
If necessary, flush-with-carcase blender
behind the front
39,75 for fully integrated dishwasher,
height 82 - 87 cm.

Original front with for refrigerators

pullout partitioning C1GFV6073Z2 L/R 60 176 188 220 251 282 317 351 374
26,25 with standard recessed handle above
For fully integrated dishwasher and for dishwashers
for integrated built-under fridges, C1GFV6073Z2M 60 176 188 220 251 282 317 351 374
height 82 - 87 cm.
43,0

With plinth height smaller 14 cm and appliances

larger 82 cm with special handle.
Special handle solution see page 10.09.
Please state appliance model on order!

With plinth height 10 cm possible.

Permitted appliances: Miele, Bosch, Siemens, Neff and Gaggenau, if necessary exchange spring set.
Worktop depth min. 63 cm. Take into consideration extra deep visible sides.

20.08 1/2022
 Price group
Fronts for built-under appliances
Carcase height 73.0 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Original front with for refrigerators

13,0 drawer- and pullout partitioning C1GFV6073S2Z L/R 60 252 266 297 329 360 394 428 452
13,0 with standard recessed handle above
For fully integrated dishwasher and for dishwashers
for integrated built-under fridges, C1GFV6073S2ZM 60 252 266 297 329 360 394 428 452
height 82 - 87 cm.
43,0

With plinth height smaller 14 cm and appliances

larger 82 cm with special handle.
Special handle solution see page 10.09.
Please state appliance model on order!

Original front with C1GFV607361Z2 60 231 243 276 303 339 370 405 444
pullout partitioning
26,25 with original recessed handle on front above
If necessary, flush-with-carcase blender
behind the front
43,0 for fully integrated dishwasher,
height 82 - 87 cm.

Original front with C1GFV607361S2Z 60 265 283 313 352 391 431 506 550
13,0 drawer- and pullout partitioning
13,0 with original recessed handle on front above
If necessary, flush-with-carcase blender
behind the front
43,0 for fully integrated dishwasher,
height 82 - 87 cm.

Appliance plinth base GSU45 45 33

GSU60 60 36
Variable height between 4 and 14 cm.
For dishwashers.
Plinth base adapted on site.

With plinth height 10 cm possible.

Permitted appliances: Miele, Bosch, Siemens, Neff and Gaggenau, if necessary exchange spring set.
Worktop depth min. 63 cm. Take into consideration extra deep visible sides.

Price group
Sink units
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Sink unit Carcase depth 56 cm
no rear panel CTSP4573 L/R 45 211 224 238 275 301 331 372 405
1 door CTSP5073 L/R 50 215 230 241 285 313 344 386 419
1 metal water drip floor CTSP6073 L/R 60 223 238 260 304 341 374 417 455
69,5

Diagram shows L

Sink unit Carcase depth 56 cm

no rear panel CTSP8073 80 292 311 352 416 468 521 583 635
2 doors CTSP9073 90 302 325 363 431 486 542 605 659
1 metal water drip floor CTSP10073 100 307 333 370 446 505 562 620 676
CTSP12073 120 325 354 393 473 553 600 656 714
69,5
120 cm unit with centre post.

Sink unit Carcase depth 56 cm

no rear panel CTSP4573ZV 45 222 236 248 287 314 344 389 424
1 front loose CTSP5073ZV 50 225 241 251 296 327 356 399 435
no hinges and built-in refuse bin CTSP6073ZV 60 236 249 275 316 353 389 429 467
69,5 1 metal water drip floor

Recycling containers for fitting on site.

A minimum distance of 6.5 cm to the worktop front edge is essential for the cut-out!
Please pay attention to the measurements of the integrated sink.

1/2022 20.09
 Price group
Sink units
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Sink pullout unit Carcase depth 56 cm
no rear panel CTSP4573Z 45 364 382 394 429 477 525 555 605
1 pullout (depth 45 cm) CTSP5073Z 50 375 391 402 445 491 536 573 624
1 metal water drip floor CTSP6073Z 60 392 408 429 470 526 581 605 659
69,5
Recycling containers for fitting on site.

Sink waste bin unit Carcase depth 56 cm

no rear panel CTSP5073ZW 50 491 506 517 562 599 636 674 735
1 pullout (depth 50 cm)
no back section
69,5 1 odour trap
1 frame with 3 waste bins, Container change
contents 1x 14 ltr., 1x 10 ltr. and ANTSP20L 0
2,5 2,5
20 1x 10 ltr. with bio lid
in addition 2x 2.5 ltr.
10
14 1 metal water drip floor
10

Available height 28 cm to carcase top edge!

Sink waste bin unit Carcase depth 56 cm

no rear panel CTSP6073ZW 60 508 524 545 586 635 683 707 770
1 pullout (depth 50 cm)
no back section
69,5 1 odour trap
1 frame with 3 waste bins, Container change
contents 1x 20 ltr., 1x 10 ltr. and ANTSP20L 0
2,5 2,5
20 1x 10 ltr. with bio lid
in addition 2x 2.5 ltr.
10
20 1 metal water drip floor
10

Available height 28 cm to carcase top edge!

Sink waste bin unit Carcase depth 56 cm

no rear panel CTSP6073ZBS 60 489 505 525 570 606 642 681 742
1 pullout with BLANCOSELECT-
waste disposal system (depth 40 cm)
69,5 1 extendible system lid
2 waste bins, Container change
contents 1x 30 ltr. and 1x 19 ltr. ANTSP15L 0
1 metal water drip floor ANTSP8L 0

30 19 Available height 34.5 cm to carcase top edge!

Sink pullout unit Carcase depth 56 cm

no rear panel CTSP5073Z2 50 666 720 738 774 822 870 916 998
26,25
1 pullout (depth 30 cm) with drawer pan CTSP6073Z2 60 678 732 751 785 841 896 947 1032
and wooden back piece
39,75 1 cut-out cover for pop-up-waste
for installation on site
14,5-29,5 cut-out width 14.5 up to 29.5 cm
1 pullout (depth 45 cm)
25 1 metal water drip floor C1

upper pullout Recycling containers for fitting on site.

Usable height of the lower pullout 33 cm.

Sink pullout unit Carcase depth 56 cm

no rear panel CTSP8073Z2 80 840 864 914 995 1072 1149 1260 1373
26,25
1 pullout (depth 45 cm) with drawer pan CTSP9073Z2 90 879 912 974 1047 1131 1216 1333 1452
and wooden back piece CTSP10073Z2 100 911 943 1002 1063 1170 1277 1359 1481
39,75 1 cut-out cover for pop-up-waste CTSP12073Z2 120 944 971 1021 1081 1206 1331 1374 1499
for installation on site
14,5-29,5 cut-out width 14.5 up to 29.5 cm
1 pullout (depth 45 cm)
25 1 metal water drip floor C1

Recycling containers for fitting on site.

upper pullout
Usable height of the lower pullout 33 cm.

A minimum distance of 6.5 cm to the worktop front edge is essential for the cut-out!
Please pay attention to the measurements of the integrated sink.

20.10 1/2022
 Price group
Sink units
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Sink waste bin unit Carcase depth 56 cm
no rear panel CTSP5073Z2W 50 690 742 762 798 843 889 937 1021
26,25
1 pullout (depth 30 cm) with drawer pan
and wooden back piece
39,75 1 cut-out cover for pop-up-waste
for installation on site Container change
cut-out width 14.5 up to 29.5 cm ANTSP18L 0
20
2,5 2,5 1 pullout (depth 50 cm)
8 no back section C1
12
8 1 odour trap
1 frame with 3 waste bins,
14,5-29,5 contents 1x 12 ltr., 1x 8 ltr. and
1x 8 ltr. with bio lid
25 in addition 2x 2.5 ltr.
1 metal water drip floor
upper pullout
Available height 34.5 cm to carcase top edge!

Sink waste bin unit Carcase depth 56 cm

no rear panel CTSP6073Z2W 60 701 755 774 810 862 915 966 1052
26,25
1 pullout (depth 30 cm) with drawer pan
and wooden back piece
39,75 1 cut-out cover for pop-up-waste
for installation on site Container change
cut-out width 14.5 up to 29.5 cm ANTSP18L 0
20
2,5 2,5 1 pullout (depth 50 cm)
8 no back section C1
18 1 odour trap
8
1 frame with 3 waste bins,
14,5-29,5
contents 1x 18 ltr., 1x 8 ltr. and
1x 8 ltr. with bio lid
25 in addition 2x 2.5 ltr.
1 metal water drip floor
upper pullout
Available height 34.5 cm to carcase top edge!

Sink waste bin unit Carcase depth 56 cm

no rear panel CTSP8073Z2W 80 906 932 982 1063 1139 1216 1328 1447
26,25
1 pullout (depth 45 cm) with drawer pan CTSP9073Z2W 90 947 979 1041 1113 1197 1282 1401 1527
and wooden back piece CTSP10073Z2W 100 978 1008 1070 1129 1239 1345 1426 1556
39,75 1 cut-out cover for pop-up-waste CTSP12073Z2W 120 1009 1037 1088 1147 1273 1399 1442 1572
for installation on site
cut-out width 14.5 up to 29.5 cm
1 pullout (depth 45 cm)
2,5 12 1 odour trap C1
1 frame with 4 waste bins,
8 18
contents 1x 18 ltr., 1x 12 ltr.,
1x 8 ltr. with bio lid and 1x 2.5 ltr.
14,5-29,5
1 metal water drip floor
25
Available height 34.5 cm to carcase top edge!

upper pullout

Sink unit with back wall MPRU 44

1 cover for on-site hose cutout

If a rear panel is required for a sink unit,

please always order this unit with the code MP RU.

A minimum distance of 6.5 cm to the worktop front edge is essential for the cut-out!
Please pay attention to the measurements of the integrated sink.

1/2022 20.11
 Price group
Sink units
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Opening support for HFO3 175
sink pullout cupboards
Plinth base prepared for electrical unit
Operation using sensor in the plinth area
Integrated orientation light, can be switched off
110 - 230 volt
Intensity adjustable
Dimensions 16 x 30 x 3.5 cm
Cable length 200 cm, plug-in power supply
internationally adaptable, colour grey
Water protection shelf is deleted

From cupboard width 40 cm.

Door gap enlargement not necessary.

Container change .
1x 20 ltr. container with bio lid ANTSP20L 0
instead of 2x 10 ltr. containers

1x 18 ltr. container with bio lid ANTSP18L 0

instead of 2x 8 ltr. containers

Container change BLANCOSELECT .

3x 15 ltr. containers with 1 bio lid ANTSP15L 0
instead of 1x 30 ltr. and 1x 19 ltr. containers

2x 8 ltr. containers with 1 bio lid ANTSP8L 0

instead of 1x 19 ltr. container

Price group
Sink units for hot water taps
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Hot water towel unit Carcase depth 56 cm
no rear panel CTQ6073 L/R 60 303 320 339 385 420 456 496 535
1 door
1 compartment 36.7 cm wide for taps
accessories
69,5 1 middle side removable
Diagram shows R 1 compartment 18.4 cm wide with towel holder
1 solid base, above

The compartment for taps accessories determines

style left or right.

Sink pullout unit for Carcase depth 56 cm

hot water taps Door width 30 cm
no rear panel CTSPA9073TZ L/R 90 506 527 572 641 718 796 858 931
1 door 30 cm or 40 cm wide in front of Door width 40 cm
69,5

compartment for taps accessories CTSPQ10073TZ L/R 100 513 537 581 657 732 815 883 955
1 middle side removable
Diagram shows R 1 pullout 60 cm wide (depth 45 cm)
1 metal water drip floor

Recycling containers for fitting on site.

The compartment for taps accessories determines style left or right.

The true width for the installation of boilers and cartridges is 26.7 cm or 36.7 cm.
Please plan sink installation above pullout, available height to carcase top edge see respective cupboard!

20.12 1/2022
 Price group
Sink units for hot water taps
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Sink waste bin unit for Carcase depth 56 cm
hot water taps Door width 30 cm
no rear panel CTSPA8073TZW L/R 80 603 624 660 732 791 852 925 1005
1 door 30 cm or 40 cm wide in front of Door width 40 cm
69,5

compartment for taps accessories CTSPQ9073TZW L/R 90 611 633 669 748 807 872 951 1030
1 middle side removable
Diagram shows R 1 pullout 50 cm wide (depth 50 cm)
1 odour trap
1 frame with 3 waste bins, Container change
26,7
contents 1x 14 ltr., 1x 10 ltr. and ANTSP20L 0
36,7
1x 10 ltr. with bio lid
2,5 2,5
in addition 2x 2.5 ltr.
10
14 1 metal water drip floor
10
Available height 28 cm to carcase top edge!

Sink waste bin unit for Carcase depth 56 cm

hot water taps Door width 30 cm
no rear panel CTSPA9073TZW L/R 90 619 644 687 757 827 900 961 1043
1 door 30 cm or 40 cm wide in front of Door width 40 cm
69,5

compartment for taps accessories CTSPQ10073TZW L/R 100 627 653 697 773 842 917 985 1067
1 middle side removable
Diagram shows R 1 pullout 60 cm wide (depth 50 cm)
1 odour trap
1 frame with 3 waste bins, Container change
26,7 contents 1x 20 ltr., 1x 10 ltr. and ANTSP20L 0
36,7
1x 10 ltr. with bio lid
2,5 2,5
in addition 2x 2.5 ltr.
10 1 metal water drip floor
20
10
Available height 28 cm to carcase top edge!

Sink waste bin unit for Carcase depth 56 cm

hot water taps Door width 30 cm
no rear panel CTSPA9073TZBS L/R 90 603 624 667 740 798 858 933 1015
1 door 30 cm or 40 cm wide in front of
69,5

Door width 40 cm
compartment for taps accessories CTSPQ10073TZBS L/R 100 610 633 676 756 813 877 959 1039
1 middle side removable
Diagram shows R 1 pullout with BLANCOSELECT-
waste disposal system (depth 40 cm)
1 extendible system lid Container change
26,7 2 waste bins, ANTSP15L 0
36,7
contents 1x 30 ltr. and 1x 19 ltr. ANTSP8L 0
1 metal water drip floor
30 19
Available height 34.5 cm to carcase top edge!

The compartment for taps accessories determines style left or right.

The true width for the installation of boilers and cartridges is 26.7 cm or 36.7 cm.
Please plan sink installation above pullout, available height to carcase top edge see respective cupboard!

1/2022 20.13
 Price group
Corner sink units
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Corner sink unit Carcase depth 56 cm
Planning depth 65 resp. 75 cm Door width 40 cm
Actual space 105 (102 up to 118 cm) CTEESP10573 L/R 100 383 405 454 527 597 666 725 791
Door width 45 cm
Actual space 110 (107 up to 123 cm) CTEESP11073 L/R 100 383 405 454 527 597 666 725 791
69,5

Door width 50 cm
Actual space 115 (112 up to 128 cm) CTEESP11573 L/R 100 383 405 454 527 597 666 725 791
Diagram shows L
Door width 60 cm
Actual space Actual space 125 (122 up to 138 cm) CTEESP12573 L/R 100 461 483 532 605 675 744 803 869
1.7 no rear panel
Pl.depth

56/66 1 door
100 1 metal water drip floor
7.3 1 inner blender with angle blender CTPEEW773 7 0 0 0 0 0 0 0 0
Door width adjustable from 4 to 10 cm
Extra charge per 5 cm additional CMPTP5 5 6 8 8 8 11 14 14 16
width (up to max. 20 cm)

Diagonal corner sink unit 135° Carcase depth 56 cm

Floor dimensions 91.7 x 91.7 cm CTEDSP9273 L/R 90 429 446 468 521 557 594 642 699
1 door, 40 cm wide
Not available in IOS-C, IOS-M-C
2 corner blenders
1 metal water drip floor
69,5

Diagram shows L
On request supplied unassembled.

90
66
90
66

,5
39

Please note: when placing an order, it is imperative to specify the actual floor measurement, the angle blender CTPEEW 7 .. is adapted at factory.
The legs of the angle blender are free to choose from 4 - 10 cm width. For more than 10 cm please note extra charge MP TP 5.

Price group
Waste disposal floor units
Carcase height 73.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Waste bin floor unit Carcase depth 56 cm
1 pullout (depth 50 cm) CT3073ZWH 30 418 429 431 492 540 587 615 670
1 odour trap CT4073ZWH 40 472 485 489 547 600 653 687 749
1 frame with 1 waste bin,
69,5 contents 1x 32 ltr.

32

Waste bin floor unit Carcase depth 56 cm

1 pullout (depth 50 cm) CT4573ZWH 45 477 493 495 552 610 667 705 768
1 odour trap CT5073ZWH 50 481 498 501 557 620 682 724 790
1 frame with 2 waste bins,
69,5 contents 2x 32 ltr.

32

32

Waste bin floor unit Carcase depth 56 cm

1 pullout (depth 50 cm) CT6073ZWH 60 519 537 540 597 664 731 776 845
1 odour trap
1 frame with 4 waste bins,
69,5 contents 2x 32 ltr., 1x 10 ltr. and
1x 10 ltr. with bio lid

32 10

32 10

20.14 1/2022
 Surface style
Floor shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 73.0 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Floor shelf unit Shelf unit depth 36.2 cm
2 adjustable shelves TR307336 10-30 268 279 366 454 - 505 577 475
TR407336 30-40 282 293 396 492 - 548 627 516
Widths in mm grid variably available. TR457336 40-45 288 299 411 512 - 569 651 536
Please state desired width. TR507336 45-50 294 306 425 531 - 591 676 556
TR607336 50-60 308 319 455 569 - 633 725 596
TR907336 60-90 350 358 545 683 - 759 872 717

Shelf unit depth 58.2 cm

TR3073 10-30 280 291 384 476 - 529 605 513
TR4073 30-40 295 306 412 512 - 568 652 555
TR4573 40-45 302 314 426 529 - 589 676 577
TR5073 45-50 309 322 440 547 - 608 697 596
TR6073 50-60 324 337 469 583 - 649 744 639
TR9073 60-90 369 382 556 691 - 772 885 765

Depth extensions 68.2 cm ANUT68 26 27 30 36 38 40 46 44

for floor shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.

Surface style
Floor shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 73.0 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Floor shelf unit, Shelf unit depth 36.2 cm
thick 2.8 cm T3R307336 10-30 349 360 456 552 581 610 689 586
Back panel with circumferential shadow joint T3R607336 30-60 401 414 569 696 733 769 874 738
2 shelves T3R907336 60-90 450 464 678 836 880 924 1053 885

Shelf unit interior colour = shelf unit exterior colour. Shelf unit depth 58.2 cm
Widths in mm grid variably available. T3R3073 10-30 364 375 480 580 611 640 725 632
Please state desired width. T3R6073 30-60 424 438 591 720 758 795 906 794
Available without extra charge for free standing T3R9073 60-90 481 497 698 854 900 947 1080 952
planning, optional without back panel with visible
edges at the rear. Please state on order.

Depth extensions 68.2 cm ANUT68 26 27 30 36 38 40 46 44

for floor shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Price group
Floor units
Carcase height 16.5 cm, carcase depth 56 cm
Neutral

Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Under worktop drawer Carcase depth 56 cm
13,0 Carcase height 16.5 cm CT3017S 30 185 193 207 231 234 239 260 282
1 drawer CT4017S 40 189 199 210 234 240 242 271 294
CT4517S 45 192 204 213 237 246 256 281 305
CT5017S 50 195 208 216 240 253 272 292 318
CT6017S 60 200 212 220 244 265 282 305 334
CT8017S 80 218 225 233 263 290 314 335 364
CT9017S 90 224 232 242 275 299 326 345 376
CT10017S 100 231 241 248 283 310 340 355 388
CT12017S 120 243 259 267 304 331 364 375 409

1/2022 20.15
 Price group
Floor units
Carcase height 43.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Floor unit Carcase depth 56 cm
1 door CT3043 L/R 30 209 224 235 276 295 313 348 379
39,75 1 adjustable shelf CT4043 L/R 40 218 229 240 282 307 335 358 391
CT4543 L/R 45 222 232 242 286 313 342 376 409
Diagram shows L CT5043 L/R 50 224 237 245 287 317 348 384 417
CT6043 L/R 60 231 248 254 311 348 384 408 447

Floor unit Carcase depth 56 cm

2 doors CT8043 80 293 314 343 409 468 526 558 608
1 adjustable shelf CT9043 90 310 338 360 432 486 541 583 635
39,75 CT10043 100 313 347 364 448 504 559 597 650
120 cm unit with centre post. CT12043 120 341 374 386 482 538 592 634 691

Pullout unit Carcase depth 56 cm

1 pullout CT3043Z 30 305 323 349 402 443 481 527 576
CT4043Z 40 312 329 355 407 449 486 536 583
39,75
CT4543Z 45 317 336 361 416 457 498 547 596
CT5043Z 50 326 344 370 426 466 509 558 608
CT6043Z 60 335 351 378 435 477 521 572 622
CT8043Z 80 368 387 418 482 529 578 634 691
CT9043Z 90 490 514 553 634 695 756 828 903
CT10043Z 100 567 595 640 731 798 866 951 1036
CT12043Z 120 642 674 726 826 902 976 1072 1169

Price group
Sink units
Carcase height 43.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Sink pullout unit Carcase depth 56 cm
no rear panel CTSP6043Z 60 349 359 378 416 464 514 559 609
39,75
1 pullout (depth 45 cm) CTSP9043Z 90 423 439 472 528 598 667 766 835
with lowered wooden back piece CTSP12043Z 120 580 650 686 703 785 869 957 1044
14,5-29,5 1 cut-out cover for pop-up-waste
for installation on site
25 cut-out width 14.5 up to 29.5 cm
1 metal water drip floor

Sink unit with back wall MPRU 44

1 cover for on-site hose cutout

If a rear panel is required for a sink unit,

please always order this unit with the code MP RU.

Floor units with a carcase height of 43.25 cm have the standard plinth with heights of between 7 and 20 cm. This type is intended for planning to use
finishing tops or further cupboards. If a plinth height of more than 20 cm is needed, possibly with recessed plinth blender or for free standing floor unit
groups (island solutions), then a plinth platform SOPOD is essential, see page 70.02.

20.16 1/2022
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 43.25 cm
Side depth 34 cm FS4334 L/R 34 0 0 44 65 93 117 62
Side depth 46 cm FS4346 L/R 46 0 0 65 93 129 161 84

Carcase height 73.0 cm

Side depth 34 cm FS7334 L/R 34 0 0 53 74 102 129 67
Diagram shows R Side depth 46 cm FS7346 L/R 46 0 0 86 124 174 217 114

Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all floor units FSUL L/R 73 73 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 43.25 cm
Side depth up to 34 cm FSUEL4334 L/R 34 66 66 110 131 159 183 128
Side depth up to 46 cm FSUEL4346 L/R 46 66 66 131 159 195 227 150
Side depth up to 58 cm FSUEL4358 L/R 58 66 66 131 159 195 227 150
Diagram shows R Side depth up to 63 cm FSUEL4363 L/R 63 66 66 143 178 224 267 171
Side depth up to 68 cm FSUEL4368 L/R 68 107 107 184 219 265 308 212

Carcase height 73.0 cm

Side depth up to 34 cm FSUEL7334 L/R 34 66 66 119 140 168 195 133
Side depth up to 46 cm FSUEL7346 L/R 46 66 66 152 190 240 283 180
Side depth up to 58 cm FSUEL7358 L/R 58 66 66 152 190 240 283 180
Side depth up to 63 cm FSUEL7363 L/R 63 66 66 162 206 265 316 198
Side depth up to 68 cm FSUEL7368 L/R 68 107 107 203 247 306 357 239
Side depth up to 76 cm FSUEL7376 L/R 76 107 107 211 259 320 372 245

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“ on page 10.07.

Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit end panel Carcase height 43.0 cm
with recessed handle above Depth up to 62.5 cm
Front finish CTW54358 L/R 5 248 257 294 325 348 370 393 427
wall-bound solution (one-sided)
69,5 Width 5 cm Depth up to 70.0 cm
CTW54368 L/R 5 259 270 351 398 423 450 475 517
Please state the relevant L/R.
Diagram shows L
The end panel width is always 5 cm.
Carcase height 73.0 cm
Depth up to 62.5 cm
CTW57358 L/R 5 215 225 252 283 302 320 341 364

Depth up to 70.0 cm
CTW57368 L/R 5 227 237 303 345 367 389 412 440

Floor unit end panel Carcase height 43.0 cm

with recessed handle above CTWI543 5 340 353 413 484 513 538 566 615
Front finish
island-solution (two-sided)
69,5 depth max. 120 cm Carcase height 73.0 cm
Width 5 cm CTWI573 5 297 304 358 420 444 466 489 525

Please state the required depth, max. 120 cm is possible.

The end panel width is always 5 cm.

1/2022 20.17
 Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit end panel Carcase height 73.0 cm
with recessed handle above Depth up to 62.5 cm
26,25 Front finish CTW57358Z2 L/R 5 290 301 328 358 377 396 416 443
wall-bound solution (one-sided)
39,75 Width 5 cm Depth up to 70.0 cm
Divided in height 39.75 cm CTW57368Z2 L/R 5 303 312 378 421 443 464 487 521
Diagram shows L
with recessed handle

Please state the relevant L/R.

The end panel width is always 5 cm.

Floor unit end panel Carcase height 73.0 cm

with recessed handle above CTWI573Z2 5 372 379 432 495 519 542 566 605
26,25 Front finish
island-solution (two-sided)
39,75 depth max. 120 cm
Width 5 cm
Divided in height 39.75 cm
with recessed handle

Please state the required depth, max. 120 cm is possible.

The end panel width is always 5 cm.

Floor unit end panel Carcase height 73.0 cm

with recessed handle above Depth up to 62.5 cm
26,25 Front finish C1TW57358Z2 L/R 5 290 301 328 358 377 396 416 443
wall-bound solution (one-sided)
43,0 Width 5 cm Depth up to 70.0 cm
Divided in height 43.0 cm C1TW57368Z2 L/R 5 303 312 378 421 443 464 487 521
Diagram shows L
Please state the relevant L/R.
The end panel width is always 5 cm.

Floor unit end panel Carcase height 73.0 cm

with recessed handle above C1TWI573Z2 5 372 379 432 495 519 542 566 605
26,25 Front finish
island-solution (two-sided)
43,0 depth max. 120 cm
Width 5 cm
Divided in height 43.0 cm

Please state the required depth, max. 120 cm is possible.

The end panel width is always 5 cm.

Side panel extension ANW5VERL 43 44 52 60 63 65 69 74

Side panel extended by plinth height
Interior visible side colour lacquered,
please state colour FS.

Connection to dishwasher ANW5GSM 46

Interior visible side colour lacquered,
please state colour FS.
Side plinth attached,
state plinth colour.

0,25 Door joint connection at the rear ANW5ANS 25

The side panel has the original edge style and
door joint on the reverse side.

For connection of the floor unit end panel to

cupboards or to a second floor unit end panel,
e.g. to deep isles.

20.18 1/2022
 Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit panel Basic type
with side shelf unit area Carcase height 73.0 cm
1 recessed handle below the worktop Depth up to 62.5 cm
front and side CTW157358R L/R 15 514 531 569 638 697 756 821 895
69,5 1 fixed front at the front
with side frame in front colour Depth up to 70.0 cm
Diagram shows R 1 shelf CTW157368R L/R 15 533 553 589 664 726 787 853 930
Always state interior style,
possible colours see chapter 11! Extra charge interior
MPK/KH/KG 0
Without plinth! MPFF/PF/VM 101
The plinth end finishes at the last cupboard. MPFS/ME 147
MPFG 231
MPH 207
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
VALAIS-C

Floor unit-island side panel Basic type

with side shelf unit area Carcase height 73.0 cm
1 recessed handle below the worktop CTWI1573R 15 597 621 662 744 813 882 956 1043
front, rear and side
1 fixed front at the front and rear Extra charge interior
69,5 with side frames in front colour MPK/KH/KG 0
1 shelf MPFF/PF/VM 196
Always state interior style, MPFS/ME 286
possible colours see chapter 11! MPFG 450
MPH 377
Please state the required depth, max. 120 cm is possible.
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
Without plinth!
VALAIS-C
The plinth end finishes at the last cupboard.

Floor unit panel Basic type

with side shelf unit area in two parts Carcase height 73.0 cm
26,25 1 recessed handle below the worktop Depth up to 62.5 cm
front and side CTW157358R2 L/R 15 694 722 767 862 943 1024 1109 1210
39,75
1 fixed front at the front
with side frame in front colour Depth up to 70.0 cm
Diagram shows R 1 recessed handle at the front and side, CTW157368R2 L/R 15 722 750 798 896 979 1064 1154 1258
39.75 cm high
1 fixed front at the front Extra charge interior
with side frame in front colour MPK/KH/KG 0
Always state interior style, MPFF/PF/VM 101
possible colours see chapter 11! MPFS/ME 147
MPFG 231
Without plinth! MPH 207
The plinth end finishes at the last cupboard.
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
VALAIS-C

Floor unit-island side panel Basic type

with side shelf unit area in two parts Carcase height 73.0 cm
26,25 1 recessed handle below the worktop CTWI1573R2 15 892 929 989 1108 1212 1315 1426 1556
front, rear and side
1 fixed front at the front and rear Extra charge interior
39,75 with side frames in front colour MPK/KH/KG 0
1 recessed handle at the front, rear and side, MPFF/PF/VM 196
39.75 cm high MPFS/ME 286
1 fixed front at the front and rear MPFG 450
with side frames in front colour MPH 377
Always state interior style,
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
possible colours see chapter 11!
VALAIS-C
Please state the required depth, max. 120 cm is possible.
Without plinth!
The plinth end finishes at the last cupboard.

Connection to dishwasher ANW15GSM 46

Interior visible side colour lacquered,
please state colour FS.
Side plinth attached,
state plinth colour.

1/2022 20.19
 Price group
45° mitre end panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
45° mitre end panel Carcase height 43.0 cm
with recessed handle above Depth up to 62.5 cm
Front finish CTW54358K45 L/R 5 248 257 294 325 348 370 393 427
69,5 wall-bound solution (one-sided)
on the front with 45° chamfered edge for mitre Depth up to 70.0 cm
Diagram shows L transition with floor unit front CTW54368K45 L/R 5 259 270 351 398 423 450 475 517
Width 5 cm

Carcase height 73.0 cm

Depth up to 62.5 cm
CTW57358K45 L/R 5 215 225 252 283 302 320 341 364

Depth up to 70.0 cm
CTW57368K45 L/R 5 227 237 303 345 367 389 412 440
Carcase height 43.0 / 73.0 cm
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C

45° mitre end panel for isles Carcase height 43.0 cm

with recessed handle above CTWI543K45 5 340 353 413 484 513 538 566 615
Front finish
69,5 island-solution (two-sided)
depth max. 120 cm Carcase height 73.0 cm
both sides with 45° chamfered edge for mitre CTWI573K45 5 297 304 358 420 444 466 489 525
transition with floor unit fronts
Carcase height 43.0 / 73.0 cm
Width 5 cm
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C

45° mitre end panel Carcase height 73.0 cm

26,25 with recessed handle above Depth up to 62.5 cm
Front finish CTW57358K45Z2 L/R 5 290 301 328 358 377 396 416 443
39,75 wall-bound solution (one-sided)
on the front with 45° chamfered edge for mitre Depth up to 70.0 cm
Diagram shows L transition with floor unit front CTW57368K45Z2 L/R 5 303 312 378 421 443 464 487 521
Width 5 cm
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C
Divided in height 39.75 cm
with recessed handle

45° mitre end panel for isles Carcase height 73.0 cm

26,25 with recessed handle above CTWI573K45Z2 5 372 379 432 495 519 542 566 605
Front finish
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C
39,75 island-solution (two-sided)
depth max. 120 cm
both sides with 45° chamfered edge for mitre
transition with floor unit fronts
Width 5 cm
Divided in height 39.75 cm
with recessed handle

45° mitre end panel Carcase height 73.0 cm

26,25 with recessed handle above Depth up to 62.5 cm
Front finish C1TW57358K45Z2 L/R 5 290 301 328 358 377 396 416 443
43,0 wall-bound solution (one-sided)
on the front with 45° chamfered edge for mitre Depth up to 70.0 cm
transition with floor unit front C1TW57368K45Z2 L/R 5 303 312 378 421 443 464 487 521
Diagram shows L Width 5 cm
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C
Divided in height 43.0 cm

45° mitre end panel for isles Carcase height 73.0 cm

26,25 with recessed handle above C1TWI573K45Z2 5 372 379 432 495 519 542 566 605
Front finish
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C
43,0 island-solution (two-sided)
depth max. 120 cm
both sides with 45° chamfered edge for mitre
transition with floor unit fronts
Width 5 cm
Divided in height 43.0 cm

Can be ordered in connection with processing type AN 5K45 see page 10.04. Please state L/R.
Please plan side panel depth flush-front, i.e. total depth to carcase edge + 2 mm (with C1 4 mm) + front thickness.

20.20 1/2022
 Price group
45° mitre end panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Side panel extension ANW5VERL 43 44 52 60 63 65 69 74
Side panel extended by plinth height
Interior visible side colour lacquered,
please state colour FS.

0,25 Door joint connection at the rear ANW5ANS 25

The side panel has the original edge style and
door joint on the reverse side.

For connection of the floor unit end panel to

cupboards or to a second floor unit end panel,
e.g. to deep isles.

Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit blender Carcase height 43.0 cm
with recessed handle above CTP2043 L/R 20 48 51 56 62 67 72 74 81
Front finish
69,5 Carcase height 73.0 cm
Front finish blenders are manufactured with a maximum CTP2073 L/R 20 56 58 62 67 72 78 79 87
Diagram shows L 20 cm width.

Floor unit blender Carcase height 73.0 cm

26,25 with division CTP2073Z2 L/R 20 99 101 105 111 117 122 123 133
with recessed handle above
39,75 Divided in height 39.75 cm
with recessed handle
Diagram shows L Front finish

Front finish blenders are manufactured with a maximum

20 cm width.

Floor unit blender Carcase height 73.0 cm

26,25 with division C1TP2073Z2 L/R 20 99 101 105 111 117 122 123 133
with recessed handle above
43,0 Divided in height 43.0 cm
Front finish
Diagram shows L
Front finish blenders are manufactured with a maximum
20 cm width.

Blenders between units ANB1 L/R 36 38 40 43 50 55 60 65

1 additional longitudinal edge in
Not available in BOSSA-C
original style
1 door joint connection strip

Possible from 6.5 cm width.

Extra charge for blender width MPST65 38

less than 6.5 cm
Not available in BOSSA-C
Minimum blender width 2 cm
Diagram shows R 1 longitudinal edge smooth,
not in original style

This style form is not recommended.

Please state L/R!

1/2022 20.21
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit corner blender 90° Carcase height 43.0 cm
with recessed handle above CTPE43 10 102 104 120 136 143 149 163 177
Front finish
69,5 freely selectable leg measurement Carcase height 73.0 cm
from 4 x 4 cm to 10 x 10 cm width CTPE73 10 98 100 117 128 138 149 159 173
4
Flush with front.
Please state rear length (inside measurement)
from l to r on order.
4

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

Floor unit corner blender 90° Carcase height 73.0 cm

26,25 with division CTPE73Z2 10 140 143 160 172 181 190 203 220
with recessed handle above
39,75 Divided in height 39.75 cm
with recessed handle
4 Front finish
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width
4

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

Floor unit corner blender 90° Carcase height 73.0 cm

26,25 with division C1TPE73Z2 10 140 143 160 172 181 190 203 220
with recessed handle above
43,0 Divided in height 43.0 cm
Front finish
4 freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

4

Please state rear length (inside measurement)

from l to r on order.

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

Floor unit corner blender Carcase height 43.0 cm

with recessed handle above CTPEW43 10 119 122 134 159 162 165 175 190
Front finish
Freely selectable angle up to max. 270° Carcase height 73.0 cm
69,5
(Programme BOSSA-C permitted up to 180°) CTPEW73 10 112 116 130 146 156 163 170 184
and freely selectable leg measurement from
3 Carcase height 43.0 / 73.0 cm
3 x 3 cm up to 10 x 10 cm width
Not available in IOS-C, IOS-M-C
3

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

20.22 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit corner blender Carcase height 73.0 cm
with division CTPEW73Z2 10 156 159 174 188 199 208 214 232
26,25
with recessed handle above
Not available in IOS-C, IOS-M-C
Divided in height 39.75 cm
39,75
with recessed handle
Front finish
3
Freely selectable angle up to max. 270°
(Programme BOSSA-C permitted up to 180°)
3

and freely selectable leg measurement from

3 x 3 cm up to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

Floor unit corner blender Carcase height 73.0 cm

with division C1TPEW73Z2 10 156 159 174 188 199 208 214 232
26,25
with recessed handle above
Not available in IOS-C, IOS-M-C
Divided in height 43.0 cm
43,0
Front finish
Freely selectable angle up to max. 270°
3
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3

3 x 3 cm up to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

Surface style
Support panels with plinth Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MC H
Support panel with plinth For carcase height 73.0 cm
for blender CTWSP7356 L/R 56 93 93 170 224 243 262 298 229
Thickness 1.6 cm CTWSP7366 L/R 66 100 100 193 255 276 296 335 261
prepared for connection to
floor unit blenders with
recessed handle milling

Diagram shows R Only as accessory type for blenders CTP ..,

not available loose!
For use of dishwasher or open niche.
Visible side points towards dishwasher or to the
open niche. Please state type left/right.

Support panel with plinth up to

Thickness 1.6 cm For carcase height 73.0 cm
both sides finished TWS7358 L/R 63 70 70 148 203 223 243 279 204
TWS7368 L/R 70 82 82 162 223 251 279 320 235
Please state required depth.
Please state whether placed L/R and plinth height.
Fit plinth return on site.
Diagram shows R Plinth height 1.5 cm larger for floor adjustment.

1/2022 20.23
 Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Floor unit blender Carcase height 43.0 cm
flush with carcase TSB2043 20 24 34 36 42 48 53 61 46

Carcase height 73.0 cm

TSB2073 20 31 34 37 49 53 57 67 45

Surface style
Rear panels Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Height KH KG VM ME FG MC H
Rear panel per metre
type of visible side charge per started 10 cm
Texture direction is vertical RW73 73 156 156 248 263 284 301 298
in variable sizes
with loose plinth
Max. length 260 cm (detailed dimension information
can be found in chapter 71).

Rear panels show matching

front colour on visible side only,
back of rear panel to our choice.
Over depth worktop necessary,
no plinth steps possible.

Length connection per top part

tongue and groove joint VL 23
without pop-up fitting

Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front RWF73 174 191 275 312 347 394 427 460
in variable sizes
72,75 Height up to 72.75 cm Not available in IOS-C, IOS-M-C
Max. width 250 cm (detailed dimension information
can be found on page 71.14).
without recessed handle
with loose plinth

With rear panel, it is essential that worktop is over depth.

Minimum charged 0.5 metres.

Rear panel in RWF3073 30 71 78 101 122 156 185 226 251

front finish RWF4073 40 74 81 104 127 165 203 240 271
in fixed front sizes RWF4573 45 78 85 107 132 170 207 244 280
without recessed handle RWF5073 50 80 89 110 133 177 221 253 286
72,75 with loose plinth RWF6073 60 85 98 117 143 189 235 284 316
For carcase height 73.0 cm old RW .. 73

With rear panel, it is essential that worktop is over depth.

Rear panel in CRWF3073 30 140 154 174 199 222 242 284 308
front finish CRWF4073 40 148 158 183 212 237 265 300 328
with recessed handle above CRWF4573 45 159 164 186 219 242 270 307 336
with loose plinth CRWF5073 50 161 170 193 225 254 285 320 348
For carcase height 73.0 cm CRWF6073 60 172 177 207 236 271 300 349 382
CRWF8073 80 184 189 219 250 288 324 376 409
Please state measurement X, min. 4 cm! CRWF9073 90 194 200 230 267 302 342 396 433
X CRWF10073 100 205 211 241 278 321 360 419 457
With rear panel, it is essential that worktop is over depth. CRWF12073 120 211 233 267 298 353 398 461 503
old CRW .. 73

20.24 1/2022
 Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in CRWF3073Z2 30 278 278 278 278 278 278 278 278
C1
front finish CRWF4073Z2 40 418 432 452 475 500 520 562 586
with recessed handle above CRWF4573Z2 45 426 436 461 490 515 542 578 606
Divided in height 39.75 cm CRWF5073Z2 50 437 443 464 497 520 547 585 614
with recessed handle CRWF6073Z2 60 439 448 470 504 531 564 598 626
with loose plinth CRWF8073Z2 80 450 455 484 514 548 578 627 660
For carcase height 73.0 cm CRWF9073Z2 90 462 466 497 528 567 602 655 688
X CRWF10073Z2 100 472 476 508 544 580 619 674 710
Please state measurement X, min. 4 cm! CRWF12073Z2 120 482 489 519 555 599 638 696 735
old CRW .. 73 Z2
With rear panel, it is essential that worktop is over depth.

Price group
Original fronts

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Front part height 13.0 cm CFT030013 30 42 45 55 67 80 95 115 128
13,0 CFT040013 40 43 45 57 71 87 101 121 134
Please state intended purpose. CFT045013 45 43 50 58 72 89 103 124 140
CFT050013 50 43 51 60 77 96 111 130 151
CFT060013 60 44 53 62 79 100 118 140 160
CFT080013 80 60 71 81 104 133 165 183 213
CFT090013 90 64 73 89 114 146 178 196 227
CFT100013 100 67 77 95 121 159 193 209 245
CFT120013 120 73 82 110 135 180 225 233 283

Front part height 26.25 cm CFT030027 30 55 59 77 95 114 130 158 178

CFT040027 40 55 60 80 99 121 142 168 189
26,25 Please state intended purpose. CFT045027 45 55 66 81 101 122 143 173 196
CFT050027 50 55 67 85 105 129 155 177 203
CFT060027 60 59 71 87 112 136 163 196 222
CFT080027 80 126 139 158 200 241 284 332 358
CFT090027 90 130 146 163 204 244 287 335 361
CFT100027 100 134 152 169 208 247 291 338 365
CFT120027 120 139 157 174 212 250 294 340 369

Front part height 39.75 cm CFT030398 30 64 69 89 111 131 154 178 207
CFT040398 40 67 72 96 119 142 165 196 222
Please state intended purpose. CFT045398 45 67 77 97 120 143 168 205 231
CFT050398 50 70 78 102 125 153 177 212 235
39,75 CFT060398 60 71 82 111 131 163 191 235 261
CFT080398 80 135 152 191 233 277 318 379 379
CFT090398 90 145 160 205 248 299 349 416 472
CFT100398 100 149 163 209 251 302 353 419 476
CFT120398 120 157 170 217 260 310 360 427 484

Front part height 69.5 cm CFT030070 30 96 102 130 163 189 218 261 284
CFT040070 40 99 108 138 174 204 233 280 304
Please state intended purpose. CFT045070 45 99 115 140 177 211 239 287 312
CFT050070 50 100 118 151 182 219 251 298 326
69,5 CFT060070 60 107 125 161 193 235 276 332 361

1/2022 20.25
1/2022
CONTINO
Floor units, carcase height 79.5 cm

CARCASE LINE 80

Floor units Function cupboards Corner units Housing units Appliance fronts

22.01 22.02 22.03 22.05 22.08

T: 36 / 48 / 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm CGFV 45 80
CT 15 80 CT 15 80 ZR CTEE 105 80 CTH 60 80 Z CGFV 60 80
CT 20 80 CTEE 110 80 3,5 CTH 61 80 Z CGFV 45 80 M
CT 30 80 CTEE 115 80 CTH 76 80 Z CGFV 60 80 M
CT 40 80 CTEE 125 80 34,0
CTH 90 80 Z
CT 45 80
76,0

76,0
76,0 27,0
CT 50 80 76,0

CT 60 80
22.01 22.02 22.04 22.05 22.08
T: 36 / 48 / 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm CGFV 60 80 61 GZ2

Floor units
CT 80 80 CT 15 80 ZH CTEE 115 80 D CTH 60 80 S

CONTINO
CT 90 80 3,5

79.5 cm
26,25
CT 100 80
CT 120 80

76,0
76,0 76,0 12,0 46,25

22.
22.01 22.02 22.04 22.05 22.08
T: 36 / 48 / 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm CGFV 60 80 61
CT 30 80 IS2IZ CT 15 80 H CTEE 110 80 LM CTH 60 80 GS2Z
CT 40 80 IS2IZ CT 20 80 H CTEE 115 80 LM 5,75 CTH 76 80 13,0
13,0
CT 45 80 IS2IZ CT 30 80 H CTEE 125 80 LM CTH 91 80
CT 50 80 IS2IZ
CT 60 80 IS2IZ
76,0

76,0

76,0 39,75

22.01 22.02 22.04 22.05 22.08

T: 36 / 48 / 58 / 68 cm T: 36 / 48 / 58 / 68 cm T: 58 cm T: 58 / 68 cm CGFV 60 80 61
CT 80 80 IS2IZ CT 20 80 GVZ CTE 82 80 K 3,5
CTH 60 80 SO
CT 90 80 IS2IZ CT 30 80 GVZ
CT 100 80 IS2IZ
76,0

12,0
76,0 76,0 76,0

22.01 22.02 22.04 22.09

T: 58 / 68 cm T: 58 / 68 cm T: 58 cm CGFV 60 80 61 Z2
CT 30 80 ZIZ CT 30 80 ZRK CTE 92 80 K
CT 40 80 ZIZ 26,25
CT 45 80 ZIZ
CT 50 80 ZIZ
CT 60 80 ZIZ
76,0

76,0 76,0 Hob units 46,25

22.01 22.02 22.05 22.06 22.09

T: 58 / 68 cm T: 58 / 68 cm T: 58 cm T: 58 / 68 cm CGFV 60 80 61 S2Z
CT 30 80 ZIS2 CT 30 80 ZBR CTED 92 80 K CTK 60 80 Z2 13,0
CT 40 80 ZIS2 CTK 80 80 Z2 13,0
CT 45 80 ZIS2 26,25 CTK 90 80 Z2
CT 50 80 ZIS2 CTK 100 80 Z2
76,0
CT 60 80 ZIS2 46,25
CTK 120 80 Z2
76,0

76,0 46,25

22.01 22.03 22.06 22.09

T: 36 / 48 / 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm CGFV 45 80 G
CT 30 80 Z2 CT 30 80 ZISF CTK 60 80 S2Z CGFV 60 80 G
CT 40 80 Z2 13,0 CTK 80 80 S2Z
26,25 CT 45 80 Z2 13,0 CTK 90 80 S2Z
CT 50 80 Z2 CTK 100 80 S2Z
46,25
CT 60 80 Z2 46,25
CTK 120 80 S2Z
76,0
CT 80 80 Z2 76,0

CT 90 80 Z2
CT 100 80 Z2
CT 120 80 Z2 22.03 22.07 22.09
T: 58 / 68 cm T: 58 / 68 cm C1GFV 60 80 Z2
22.02
CT 30 80 ZIS3K CT 80 80 Z2 TV C1GFV 60 80 Z2M
T: 36 / 48 / 58 / 68 cm CT 90 80 Z2 TV
26,25

26,25
CT 30 80 Z2IS CT 100 80 Z2 TV
CT 40 80 Z2IS CT 120 80 Z2 TV
46,25

26,25 CT 45 80 Z2IS
CT 50 80 Z2IS 76,0 49,5

46,25
CT 60 80 Z2IS
CT 80 80 Z2IS
CT 90 80 Z2IS 22.03 22.08 22.09
CT 30 80 N T: 58 / 68 cm C1GFV 60 80 S2Z
CT 100 80 Z2IS CT 40 80 N CT 80 80 BSZ TV C1GFV 60 80 S2ZM
CT 120 80 Z2IS CT 45 80 N 13,0 CT 90 80 BSZ TV 13,0
13,0
22.02 CT 50 80 N 13,0 CT 100 80 BSZ TV
T: 36 / 48 / 58 / 68 cm CT 60 80 N CT 120 80 BSZ TV
46,25

CT 30 80 S2Z
76

13,0 CT 40 80 S2Z 49,5

13,0 CT 45 80 S2Z
CT 50 80 S2Z
46,25
CT 60 80 S2Z 22.03 T: 58 / 68 cm 22.09
C1GFV 60 80 61 Z2
CT 80 80 S2Z CTSS 120 80 T2
CT 90 80 S2Z CTSS 160 80 T2 26,25
CT 100 80 S2Z CTSS 180 80 T2
CT 120 80 S2Z
49,5
76,0

22.09
C1GFV 60 80 61
13,0 S2Z
13,0

49,5

1/2022 22.
 CONTINO
Floor units, carcase height 79.5 cm
T: Cupboard depth cm

CARCASE LINE 80

Sink units Waste bin units Carcase height 17 cm

22.10 T: 58 / 68 cm 22.13 T: 58 / 68 cm 22.14 T: 58 / 68 cm 22.15 T: 36 / 48 / 58 / 68 cm

CTSP 45 80 CTSPA 90 80 TZ CT 30 80 ZISWH CT 30 17 S
CTSP 50 80 CTSPQ 100 80 TZ CT 40 80 ZISWH CT 40 17 S
CTSP 60 80 13,0 CT 45 17 S
CT 50 17 S
76,0

CT 60 17 S
76,0

76,0
CT 80 17 S
CT 90 17 S
CT 100 17 S
22.10 T: 58 / 68 cm 22.13 T: 58 / 68 cm 22.14 T: 58 / 68 cm CT 120 17 S
Floor units

CTSP 80 80 CTSPA 80 80 TZW CT 45 80 ZISWH

CONTINO

CTSP 90 80 CTSPQ 90 80 TZW CT 50 80 ZISWH

79.5 cm

CTSP 100 80
CTSP 120 80
76,0

76,0 76,0 Carcase height 50 cm

22.
22.10 T: 58 / 68 cm 22.13 T: 58 / 68 cm 22.14 T: 58 / 68 cm 22.16 T: 36 / 48 / 58 / 68 cm
CTSP 45 80 ZV CTSPA 90 80 TZW CT 60 80 ZISWH CT 30 50
CTSP 50 80 ZV CTSPQ 100 80 TZW CT 40 50
CTSP 60 80 ZV CT 45 50
CT 50 50
46,25
76,0

CT 60 50
76,0

76,0

22.10 T: 58 / 68 cm 22.13 T: 58 / 68 cm 22.16 T: 36 / 48 / 58 / 68 cm

CTSP 45 80 Z CTSPA 90 80 TZBS CT 80 50
CTSP 50 80 Z CTSPQ 100 80 CT 90 50
CTSP 60 80 Z TZBS CT 100 50
CT 120 50
76,0

46,25
76,0
Shelves

22.10 T: 58 / 68 cm 22.15 T: 36 / 58 cm 22.16 T: 36 / 48 / 58 / 68 cm

CTSP 50 80 ZW TR 30 80 CT 30 50 Z
TR 40 80 CT 40 50 Z
TR 45 80 CT 45 50 Z
TR 50 80 CT 50 50 Z
46,25
TR 60 80 CT 60 50 Z
76,0
Corner sink units TR 90 80 CT 80 50 Z
CT 90 50 Z
CT 100 50 Z
22.11 T: 58 / 68 cm 22.14 T: 58 / 68 cm 22.15 T: 36 / 58 cm CT 120 50 Z
CTSP 60 80 ZW CTEESP 105 80 T3R 30 80 22.16
CTEESP 110 80 T3R 60 80 T: 58 / 68 cm
CTEESP 115 80 T3R 90 80 CTSP 60 50 Z
CTEESP 125 80 CTSP 90 50 Z
CTSP 120 50 Z
76,0

76,0
46,25

22.11 T: 58 / 68 cm 22.14 T: 58 cm
CTSP 60 80 ZBS CTEDSP 92 80

76,0
76,0

22.11 T: 58 / 68 cm
CTSP 50 80 Z2
CTSP 60 80 Z2
26,25

46,25

22.11 T: 58 / 68 cm
CTSP 80 80 Z2
CTSP 90 80 Z2
26,25
CTSP 100 80 Z2
CTSP 120 80 Z2
46,25

22.11 T: 58 / 68 cm
CTSP 50 80 Z2W
26,25

46,25

22.12 T: 58 / 68 cm
CTSP 60 80 Z2W
26,25

46,25

22.12 T: 58 / 68 cm
CTSP 80 80 Z2W
CTSP 90 80 Z2W
26,25
CTSP 100 80 Z2W
CTSP 120 80 Z2W
46,25

22.13 T: 58 / 68 cm
CTQ 60 80

76,0

22. 1/2022
 Price group
Floor units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Floor unit Carcase depth 56 cm
1 door CT1580 L/R 15 239 253 276 316 342 364 403 442
2 adjustable shelves CT2080 L/R 20 239 253 276 316 342 364 403 442
CT3080 L/R 30 239 253 276 316 342 364 403 442
76,0

CT4080 L/R 40 247 265 287 335 360 386 433 470
CT4580 L/R 45 253 272 290 340 369 399 449 489
Diagram shows L CT5080 L/R 50 255 280 293 343 378 415 463 507
CT6080 L/R 60 270 290 312 367 408 452 500 545

Floor unit Carcase depth 56 cm

2 doors CT8080 80 353 377 428 501 565 627 701 765
2 adjustable shelves CT9080 90 368 397 440 523 588 655 727 793
CT10080 100 376 402 452 539 607 675 750 818
120 cm unit with centre post. CT12080 120 400 427 474 577 673 724 799 871
76,0

Floor unit Carcase depth 56 cm

1 door CT3080IS2IZ L/R 30 485 500 520 562 586 610 650 708
2 inner drawers CT4080IS2IZ L/R 40 500 514 538 584 610 635 682 743
1 inner pullout CT4580IS2IZ L/R 45 510 525 545 595 626 655 704 767
76,0

CT5080IS2IZ L/R 50 518 540 553 604 640 676 725 791
CT6080IS2IZ L/R 60 533 553 578 631 674 718 765 834
Diagram shows L
Exchange wide angle hinge ANIGE 0
through standard hinge, with spacer strip

Floor unit Carcase depth 56 cm

2 doors CT8080IS2IZ 80 687 712 763 835 899 961 1034 1127
2 inner drawers CT9080IS2IZ 90 719 746 790 874 939 1004 1075 1173
1 inner pullout CT10080IS2IZ 100 736 763 811 899 967 1034 1111 1211
76,0
Exchange wide angle hinge ANIGD 0
through standard hinge, with spacer strip
both sides

Pullout unit Carcase depth 56 cm

1 pullout CT3080ZIZ 30 500 523 540 586 629 669 739 805
1 inner pullout CT4080ZIZ 40 511 533 549 606 656 705 783 854
CT4580ZIZ 45 515 537 553 610 665 720 800 873
76,0 CT5080ZIZ 50 521 547 560 618 677 736 822 896
CT6080ZIZ 60 530 558 575 635 701 768 862 940

Inner pullout exchange ANISIZ 0

instead of 1 inner pullout
1 inner drawer will be supplied.

Pullout unit Carcase depth 56 cm

1 pullout CT3080ZIS2 30 579 603 618 666 706 748 820 894
2 inner drawers CT4080ZIS2 40 591 612 629 686 735 784 862 940
CT4580ZIS2 45 597 617 634 691 746 799 883 963
76,0 CT5080ZIS2 50 604 629 643 701 761 820 903 983
CT6080ZIS2 60 615 642 659 721 785 851 948 1033

Pullout unit Carcase depth 56 cm

26,25 2 pullouts CT3080Z2 30 511 535 550 599 641 681 754 822
CT4080Z2 40 521 543 559 617 668 720 798 870
CT4580Z2 45 525 547 565 621 677 733 818 891
46,25 CT5080Z2 50 530 557 573 631 691 751 838 913
CT6080Z2 60 542 571 586 650 718 783 882 962
CT8080Z2 80 683 726 742 850 956 1063 1198 1305
CT9080Z2 90 728 764 807 896 1009 1123 1254 1367
C1 CT10080Z2 100 760 783 828 926 1035 1144 1283 1399
CT12080Z2 120 763 795 858 955 1064 1173 1302 1420

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 22.01
 Price group
Floor units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Pullout unit Carcase depth 56 cm
1 pullout with drawer pan CT3080Z2IS 30 581 604 611 669 705 741 792 862
26,25
1 inner drawer CT4080Z2IS 40 594 616 626 689 732 774 826 901
1 pullout CT4580Z2IS 45 599 621 634 699 744 787 843 918
46,25 CT5080Z2IS 50 601 627 639 719 760 801 862 940
CT6080Z2IS 60 615 639 659 737 784 832 893 973
CT8080Z2IS 80 796 838 857 933 1021 1108 1356 1478
CT9080Z2IS 90 829 876 901 977 1075 1176 1423 1552
C1 CT10080Z2IS 100 875 922 955 1036 1145 1252 1503 1639
CT12080Z2IS 120 907 961 997 1082 1202 1320 1571 1711

Pullout unit Carcase depth 56 cm

13,0 2 drawers CT3080S2Z 30 581 604 611 669 705 741 792 862
13,0
1 pullout CT4080S2Z 40 594 616 626 689 732 774 826 901
CT4580S2Z 45 599 621 634 699 744 787 843 918
46,25 CT5080S2Z 50 601 627 639 719 760 801 862 940
CT6080S2Z 60 615 639 659 737 784 832 893 973
CT8080S2Z 80 796 838 857 933 1021 1108 1356 1478
CT9080S2Z 90 829 876 901 977 1075 1176 1423 1552
C1 CT10080S2Z 100 875 922 955 1036 1145 1252 1503 1639
CT12080S2Z 120 907 961 997 1082 1202 1320 1571 1711

Price group
Function floor units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit Carcase depth 56 cm
1 pullout (depth 50 cm) CT1580ZR 15 466 489 509 557 581 605 650 708
2 metal boards each with
2 divisions
76,0

Towel unit Carcase depth 56 cm

with ventilation holes in the rear wall CT1580ZH 15 482 505 523 574 596 617 664 724
1 pullout (depth 50 cm)
1 extending towel rail
76,0 2-rods, chromed
(installation depth 50 cm)
1 metal board

Towel unit Carcase depth 56 cm

with ventilation holes in the rear wall CT1580H L/R 15 277 291 311 358 379 400 445 483
1 door CT2080H L/R 20 277 291 311 358 379 400 445 483
1 extending towel rail chromed CT3080H L/R 30 277 291 311 358 379 400 445 483
76,0 (installation depth 50 cm)

Diagram shows L For 15 cm width with 2 towel rails,

from 20 cm width with 3 towel rails.

Pharmacy floor unit Carcase depth 56 cm

1 large capacity pullout with front panel CT2080GVZ 20 496 511 534 574 600 621 661 699
guided on 1 pullout and CT3080GVZ 30 496 511 534 574 600 621 661 699
1 drawer
1 inner drawer
76,0

Storage unit Carcase depth 56 cm

1 pullout (depth 50 cm) CT3080ZRK L/R 30 475 488 510 548 573 594 631 668
3 wire baskets
1 drop-in tray
76,0
Max. load capacity 16 kg per pullout.
Diagram shows L

Bread cupboard Carcase depth 56 cm

1 pullout CT3080ZBR 30 621 651 671 727 754 780 818 891
1 frame with bread bag
for long french loaves
76,0
1 bottle arrangement

22.02 1/2022
 Price group
Function floor units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Bottle cupboard Carcase depth 56 cm
1 pullout CT3080ZISF 30 597 616 619 669 692 714 742 809
1 inner drawer
1 removable wire basket
holding 8 bottles
76,0

Storage unit Carcase depth 56 cm

1 pullout CT3080ZIS3K 30 734 760 770 837 870 902 951 1036
3 inner drawers
2 removable baskets
76,0

Niche door CT3080N L/R 30 241 247 279 308 338 363 407 446
1 door with attached plinth CT4080N L/R 40 244 253 286 321 351 379 426 464
1 recessed handle below the worktop CT4580N L/R 45 244 261 288 325 356 387 434 472
no rear panel CT5080N L/R 50 245 266 296 331 364 400 446 484
76

no floor CT6080N L/R 60 251 274 306 342 383 421 477 521

Diagram shows L Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.

Floor unit with sliding doors Carcase depth 56 cm

consisting of: CTSS12080T2 120 1513 1533 1570 1643 1697 1750 1816 1979
2 sliding doors on one front level CTSS16080T2 160 1639 1665 1705 1791 1854 1916 1993 2172
100% opening width CTSS18080T2 180 1735 1765 1814 1911 1981 2054 2140 2333
1 carcase, left in half the planning width
Cupboard width 120, 160, 180 cm:
76,0
1 carcase, right in half the planning width
Not available in IOS-C, IOS-M-C
2 adjustable shelves per carcase
1 fitting-set for on-site installation

Inner drawers and inner pullouts are possible.

Sliding doors in closed position on one level.
The cupboard is supplied in separate modules.
Width alterations not possible!
VB and AN TU 85 not possible.

Price group
Corner floor units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Corner floor unit Carcase depth 56 cm
Planning depth 65 resp. 75 cm Door width 40 cm
Actual space 105 (102 up to 118 cm) CTEE10580 L/R 100 480 519 571 670 750 828 907 989
Door width 45 cm
Actual space 110 (107 up to 123 cm) CTEE11080 L/R 100 480 519 571 670 750 828 907 989
76,0

Door width 50 cm
Actual space 115 (112 up to 128 cm) CTEE11580 L/R 100 480 519 571 670 750 828 907 989
Diagram shows L
Door width 60 cm
Actual space Actual space 125 (122 up to 138 cm) CTEE12580 L/R 100 558 597 649 748 828 906 985 1067
1.7 1 door
Pl.depth

56/66 2 adjustable shelves

100 1 inner blender with angle blender CTPEEW780 7 0 0 0 0 0 0 0 0
7.3 adjustable from 4 to 10 cm
Door width Extra charge per 5 cm additional CMPTP5 5 6 8 8 8 11 14 14 16
width (up to max. 20 cm)

Please note: when placing an order, it is imperative to specify the actual floor measurement, the angle blender CTPEEW 7 .. is adapted at factory.
The legs of the angle blender are free to choose from 4 - 10 cm width. For more than 10 cm please note extra charge MP TP 5.

1/2022 22.03
 Price group
Corner floor units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Corner floor unit Carcase depth 56 cm
Planning depth 65 resp. 75 cm CTEE11580D L/R 100 681 727 778 884 965 1044 1121 1221
Actual space 115 (112 up to 128 cm)
1 door, 50 cm wide
2 semi-circular swing-out shelves
76,0

with chromium plated railing

1 inner blender with angle blender CTPEEW780 7 0 0 0 0 0 0 0 0
Diagram shows L
adjustable from 4 to 10 cm
Actual space Extra charge per 5 cm additional CMPTP5 5 6 8 8 8 11 14 14 16
1.7 width (up to max. 20 cm)
Pl.depth

56/66
100
7.3
Door width

Corner floor unit Carcase depth 56 cm

Planning depth 65 resp. 75 cm Door width 45 cm
Actual space 110 (107 up to 123 cm) CTEE11080LM L/R 100 1046 1091 1139 1245 1327 1406 1483 1617
Door width 50 cm
Actual space 115 (112 up to 128 cm) CTEE11580LM L/R 100 1046 1091 1139 1245 1327 1406 1483 1617
76,0

Door width 60 cm
Actual space 125 (122 up to 138 cm) CTEE12580LM L/R 100 1154 1199 1247 1353 1435 1514 1591 1725
Diagram shows L
1 door
Actual space 2 height adjustable swing-out shelves
1.7
with chromium plated railing
2 rotating shelf cushionings
Pl.depth

56/66
100 for installation on site
7.3 1 inner blender with angle blender CTPEEW780 7 0 0 0 0 0 0 0 0
Door width adjustable from 4 to 10 cm
Extra charge per 5 cm additional CMPTP5 5 6 8 8 8 11 14 14 16
width (up to max. 20 cm)

Carousel floor unit Carcase depth 56 cm

Floor dimensions 81.7 x 81.7 cm CTE8280K 80 877 909 925 1053 1111 1167 1227 1339
1 swivel door, self adhesive
1 carousel 360° revolving
76,0

2 rotating shelves with metal railing,

chromium plated plus dividers,
80 upper shelf height adjustable
56,6

Special handle solution see page 10.10.

On request supplied unassembled.
Not possible with worktops less than 3 cm thickness.
80
56,6

Carousel floor unit Carcase depth 56 cm

Floor dimensions 91.7 x 91.7 cm CTE9280K 90 966 1007 1031 1170 1237 1301 1378 1502
1 swivel door, self adhesive
1 carousel 360° revolving
76,0

2 rotating shelves with metal railing,

chromium plated plus dividers,
90 upper shelf height adjustable
66,6

Special handle solution see page 10.10.

On request supplied unassembled.
90

Not possible with worktops less than 3 cm thickness.

66,6

Additional carousel shelf TE80KB 100

1 rotating shelf with metal railing, TE90KB 113
chromium plated including dividers
for extending to a third level

Please note: when placing an order, it is imperative to specify the actual floor measurement, the angle blender CTPEEW 7 .. is adapted at factory.
The legs of the angle blender are free to choose from 4 - 10 cm width. For more than 10 cm please note extra charge MP TP 5.

22.04 1/2022
 Price group
Corner floor units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Diagonal corner unit 135° Carcase depth 56 cm
Floor dimensions 91.7 x 91.7 cm CTED9280K L/R 90 881 917 949 1013 1057 1100 1158 1263
1 door, 40 cm wide
Not available in IOS-C, IOS-M-C
2 corner blenders
1 carousel 360° revolving
76,0

2 rotating shelves with metal

Diagram shows L
railing and adjustable divisions

90 On request supplied unassembled.

66
90
66

,5
39

Price group
Built-under oven/microwave housing units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

3,5 Built-under oven/microwave housing unit Carcase depth 56 cm
1 blender CTH6080Z 60 461 481 499 536 574 609 644 701
1 niche max. CTH6180Z 61 473 495 513 550 588 627 663 723
34,0 width: 56.5 / 57.7 / 72.5 / 86.5 cm CTH7680Z 76 482 505 525 564 605 645 681 742
27,0 height: 38-46 cm CTH9080Z 90 603 630 658 714 769 797 869 948
1 pullout
Cupboard width 60, 61, 76, 90 cm:
Not available in IOS-C, IOS-M-C
Front with chamfered edge at the bottom for opening.
Plan optional opening support HFO3.

3,5 Built-under oven housing unit Carcase depth 56 cm

1 blender CTH6080S 60 382 398 414 449 470 495 522 570
1 niche max. 56.5 x 60 cm
Not available in IOS-C, IOS-M-C
1 drawer
12,0
Front with chamfered edge at the bottom for opening.
Plan optional opening support HFO3.
From niche height 58 cm, use a 6.3 cm high drawer.

5,75
Built-under oven housing unit Carcase depth 56 cm
1 blender CTH6080 60 178 181 191 205 242 281 296 324
1 niche max. CTH7680 76 225 237 255 283 296 307 341 371
width: 56.5 / 72.5 / 88 cm CTH9180 91 354 372 398 439 460 480 523 571
height: 70 cm

3,5 Built-under oven housing unit Carcase depth 56 cm

1 blender CTH6080SO 60 389 404 423 459 482 506 530 579
1 niche max. 56.5 x 60 cm
1 plinth drawer (installation depth 50 cm)
12,0
Only for plinth height 10 cm possible.
No adjustable plinth legs.

When installed near a corner situation allowances must be made for drawers and pullouts in the adjacent corner to avoid fouling cooker knobs and handles
increase corner blender width.

Programme TOCCO-C one-sided with thick edge at widths of 61, 76 and 91 cm.

1/2022 22.05
 Price group
Hob units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Hob unit Carcase depth 56 cm

26,25 1 protective screen CTK6080Z2 60 606 636 651 714 782 847 946 1033
2 pullouts CTK8080Z2 80 748 790 808 914 1022 1127 1263 1376
CTK9080Z2 90 793 829 872 964 1075 1187 1322 1439
46,25 Control panel on top. CTK10080Z2 100 824 849 892 993 1100 1210 1347 1468
CTK12080Z2 120 827 859 924 1020 1129 1238 1367 1492
C1

Hob unit Carcase depth 56 cm

13,0 1 protective screen CTK6080S2Z 60 679 704 724 801 849 896 957 1044
13,0
2 drawers CTK8080S2Z 80 859 902 922 997 1085 1173 1420 1549
1 pullout CTK9080S2Z 90 894 941 966 1044 1142 1240 1491 1624
46,25 CTK10080S2Z 100 939 989 1020 1102 1210 1318 1568 1708
Control panel on top. CTK12080S2Z 120 971 1026 1063 1146 1267 1385 1636 1784
C1

Planning tips
Floor units with drawers will be given a cable protection on request, for use with hobs with sensor control above.
Please plan in addition the cable protection e.g. AN MU.

Recessed handle cut-out ANTKGAUS 44

for ventilation of induction hobs
Air gap 0.5 cm underneath worktop
max. length of the recessed handle 310 cm

Cupboard with drawer above, ANMU 57

prepared for hob
Protective cable shelf, removable

Necessary to state appliance.

Cut-out floor unit side ANMU2S 43

cutout 50 x 4.2 cm at the
side upper edge

For hobs across several cupboards.

Blender instead of drawer ANBLS 0

Blender factory drilled ANBLBO 53 53 53 53 53 53 53 53

Blender has holes for control knobs
Not available in IOS-C, IOS-M-C
Please state hob type, accessories for hob,
worktop and worktop thickness.

Blender factory drilled ANBLBO1 53 53 53 53 53 53 53 53

7 drill holes (5x operating knob, 2x socket)
Not available in IOS-C, IOS-M-C
50 mm diameter.
Placed on the blender in height and width.
Suitable for Bora Professional.

Specify deviations in drill hole diameter and

placement in the order!

Blender factory drilled ANBLBO2 53 53 53 53 53 53 53 53

5 drill holes for operating knobs 50 mm diameter.
Not available in IOS-C, IOS-M-C
Placed on the blender in height and width.
Suitable for Bora Professional.

Specify deviations in drill hole diameter and

placement in the order!

Blender factory drilled ANBLBO3 53 53 53 53 53 53 53 53

2 drill holes 50 mm diameter for Bora sockets.
Not available in IOS-C, IOS-M-C
Placement on the blender 100 mm each from
the outside.

Specify deviations in drill hole diameter and

placement in the order!

22.06 1/2022
 Price group
Hob units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Blender factory drilled ANBLBOGL - - - - - 211 - -
Blender has holes for control knobs
Available in IOS-C, IOS-M-C
Please state hob type, accessories for hob,
worktop and worktop thickness.

Blender factory drilled ANBLBOGL1 - - - - - 211 - -

7 drill holes (5x operating knob, 2x socket)
Available in IOS-C, IOS-M-C
50 mm diameter.
Placed on the blender in height and width.
Suitable for Bora Professional.

Specify deviations in drill hole diameter and

placement in the order!

Blender factory drilled ANBLBOGL2 - - - - - 211 - -

5 drill holes for operating knobs 50 mm diameter.
Available in IOS-C, IOS-M-C
Placed on the blender in height and width.
Suitable for Bora Professional.

Specify deviations in drill hole diameter and

placement in the order!

Blender factory drilled ANBLBOGL3 - - - - - 211 - -

2 drill holes 50 mm diameter for Bora sockets.
Available in IOS-C, IOS-M-C
Placement on the blender 100 mm each from
the outside.

Specify deviations in drill hole diameter and

placement in the order!

Floor unit prepared for under-floor ANTILGER 145

extractor
The cupboard is prepared with the necessary
appliance clearance below the hob.
Rear wall construction is prepared for the
respective appliance requirements.
The lower pullout is shortened, depending on
the choice of appliance.

Essential to state appliance and planning-relevant

accessories required, e.g. recirculating air, extraction,
air circulation unit, sound absorber etc.

Floor unit prepared for table Carcase depth 56 cm

26,25

ventilator CT8080Z2TV 80 743 785 802 910 1016 1123 1258 1365
2 pullouts CT9080Z2TV 90 788 824 866 956 1069 1183 1314 1427
Back wall can be removed from the CT10080Z2TV 100 820 843 888 986 1095 1204 1343 1458
46,25

cupboard interior. CT12080Z2TV 120 823 854 918 1015 1124 1231 1362 1480
C1
Pullout depth 40 cm for cupboard depth 58 cm.
10 Pullout depth 50 cm for cupboard depth 68 cm.

The cupboard is prepared with the necessary space for the appliance underneath the hob.
It is dimensionally tailored to the following appliances:
BORA: BHA, BFIA, PURA, PUXA
MIELE: KMDA - Series
BERBEL: BKF83DLP
ELICA: NIKOLATESLA
NOVY: UP, UPSIDE, ONE
AEG: COMBOHOB - 2 in 1 hob-extractor-combination
By pulling forward the back wall, there is no need for leaving space for an exhaust air duct.
Please note worktop depth of at least 60 cm.
Minimum plinth height 10 cm!

1/2022 22.07
 Price group
Hob units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Floor unit prepared for table Carcase depth 56 cm
13,0 ventilator CT8080BSZTV 80 845 886 908 981 1070 1157 1405 1532
13,0
1 blender CT9080BSZTV 90 879 924 951 1029 1127 1223 1476 1609
1 drawer CT10080BSZTV 100 922 973 1004 1087 1194 1303 1553 1694
46,25

1 pullout CT12080BSZTV 120 956 1010 1047 1131 1251 1369 1620 1768
Back wall can be removed from the
C1
cupboard interior.
10
Pullout depth 40 cm for cupboard depth 58 cm.
Pullout depth 50 cm for cupboard depth 68 cm.

The cupboard is prepared with the necessary space for the appliance underneath the hob.
It is dimensionally tailored to the following appliances:
BORA: BHA, BFIA, PURA, PUXA
MIELE: KMDA - Series
BERBEL: BKF83DLP
ELICA: NIKOLATESLA
NOVY: UP, UPSIDE, ONE
AEG: COMBOHOB - 2 in 1 hob-extractor-combination
By pulling forward the back wall, there is no need for leaving space for an exhaust air duct.
Please note worktop depth of at least 60 cm.
Minimum plinth height 10 cm!

Price group
Fronts for built-under appliances
Carcase height 79.5 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Original front for refrigerators
with standard recessed handle above CGFV4580 L/R 45 107 123 154 181 217 247 297 325
For fully integrated dishwasher and CGFV6080 L/R 60 117 132 170 207 244 285 326 354
for integrated built-under fridges,
height 82 - 87 cm. for dishwashers
CGFV4580M 45 107 123 154 181 217 247 297 325
76,0 With plinth height 10 cm possible. For appliances CGFV6080M 60 117 132 170 207 244 285 326 354
larger than 84.5 cm with special handle see page 10.09.
Please state appliance model on order!

Original front with CGFV608061GZ2 60 275 291 326 361 401 442 482 525
pullout partitioning
26,25

with standard recessed handle above

For fully integrated dishwasher,
height 82 - 87 cm.

46,25 With plinth height 10 cm possible.

Please state appliance model on order!

Original front with CGFV608061GS2Z 60 312 336 374 418 464 513 601 656
drawer- and pullout partitioning
13,0
13,0
with standard recessed handle above
For fully integrated dishwasher,
height 82 - 87 cm.
39,75
With plinth height 10 cm possible.
Please state appliance model on order!

Original front CGFV608061 60 180 199 234 272 308 349 391 426
with original recessed handle on front above
If necessary, flush-with-carcase blender
behind the front
for fully integrated dishwasher,
height 82 - 87 cm.
76,0

Permitted appliances: Miele (min. plinth height 7 cm), Bosch, Siemens, Neff and Gaggenau (min. plinth height 7 cm with Vario hinge), if necessary exchange
spring set. Worktop depth min. 63 cm. Take into consideration extra deep visible sides.

22.08 1/2022
 Price group
Fronts for built-under appliances
Carcase height 79.5 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Original front with CGFV608061Z2 60 275 291 326 361 401 442 482 525
pullout partitioning
26,25 with original recessed handle on the front
If necessary, flush-with-carcase blender
behind the front
46,25 for fully integrated dishwasher,
height 82 - 87 cm.

Original front with CGFV608061S2Z 60 312 336 374 418 464 513 601 656
13,0 drawer- and pullout partitioning
13,0 with original recessed handle on the front
If necessary, flush-with-carcase blender
behind the front
for fully integrated dishwasher,
46,25
height 82 - 87 cm.

Original front CGFV4580G 45 148 178 223 277 336 396 489 531
with special handle solution CGFV6080G 60 161 192 241 304 389 469 537 585
2 parts hinged front panel
Cupboard width 45, 60 cm:
for fully integrated dishwasher,
Not available in IOS-C, IOS-M-C
height 82 - 87 cm.

76,0 Special handle solution see page 10.10.

For smaller plinth heights 10 cm.
Please state appliance model on order!

Original front with for refrigerators

pullout partitioning C1GFV6080Z2 L/R 60 209 224 262 299 336 377 418 446
with standard recessed handle above
26,25
For fully integrated dishwasher and for dishwashers
for integrated built-under fridges, C1GFV6080Z2M 60 209 224 262 299 336 377 418 446
height 82 - 87 cm.
49,5
With plinth height 10 cm possible. For appliances
larger than 84.5 cm with special handle see page 10.09.
Please state appliance model on order!

Original front with for refrigerators

drawer- and pullout partitioning C1GFV6080S2Z L/R 60 301 316 354 391 428 469 510 538
13,0
with standard recessed handle above
13,0
For fully integrated dishwasher and for dishwashers
for integrated built-under fridges, C1GFV6080S2ZM 60 301 316 354 391 428 469 510 538
height 82 - 87 cm.
49,5
With plinth height 10 cm possible. For appliances
larger than 84.5 cm with special handle see page 10.09.
Please state appliance model on order!

Original front with C1GFV608061Z2 60 275 291 326 361 401 442 482 525
pullout partitioning
26,25 with original recessed handle on front above
If necessary, flush-with-carcase blender
behind the front
49,5 for fully integrated dishwasher,
height 82 - 87 cm.

Original front with C1GFV608061S2Z 60 312 336 374 418 464 513 601 656
13,0 drawer- and pullout partitioning
13,0 with original recessed handle on front above
If necessary, flush-with-carcase blender
behind the front
for fully integrated dishwasher,
49,5
height 82 - 87 cm.

Appliance plinth base GSU45 45 33

GSU60 60 36
Variable height between 4 and 14 cm.
For dishwashers.
Plinth base adapted on site.
Permitted appliances: Miele (min. plinth height 7 cm), Bosch, Siemens, Neff and Gaggenau (min. plinth height 7 cm with Vario hinge), if necessary exchange
spring set. Worktop depth min. 63 cm. Take into consideration extra deep visible sides.

1/2022 22.09
 Price group
Blenders for under-table wine cooler cupboards

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Blender for under-table CTA6017BL 60 151 155 164 175 212 251 273 296
wine cooler cupboard
Height 7 to 16.5 cm
1 blender
2 side parts for fixing to
adjoining cupboards

With plinth height 10 cm possible.

Please state appliance model on order!
For wine cooler cupboards without programme front.

Price group
Sink units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Sink unit Carcase depth 56 cm
no rear panel CTSP4580 L/R 45 247 266 284 325 358 393 444 482
1 door CTSP5080 L/R 50 251 273 287 340 374 407 459 501
1 metal water drip floor CTSP6080 L/R 60 265 284 307 362 403 445 495 539
76,0

Diagram shows L

Sink unit Carcase depth 56 cm

no rear panel CTSP8080 80 347 370 418 494 556 618 693 755
2 doors CTSP9080 90 359 386 433 513 579 645 720 783
1 metal water drip floor CTSP10080 100 367 396 442 529 599 668 738 804
CTSP12080 120 387 421 466 565 659 714 780 850
76,0
120 cm unit with centre post.

Sink unit Carcase depth 56 cm

no rear panel CTSP4580ZV 45 263 282 297 342 375 407 462 506
1 front loose CTSP5080ZV 50 267 287 300 352 389 423 473 516
no hinges and built-in refuse bin CTSP6080ZV 60 281 298 324 376 419 462 511 556
76,0
1 metal water drip floor

Recycling containers for fitting on site.

Sink pullout unit Carcase depth 56 cm

no rear panel CTSP4580Z 45 434 453 467 511 569 624 661 721
1 pullout (depth 45 cm) CTSP5080Z 50 446 464 477 528 583 638 680 741
1 metal water drip floor CTSP6080Z 60 465 485 511 559 626 691 721 784
76,0
Recycling containers for fitting on site.

Sink waste bin unit Carcase depth 56 cm

no rear panel CTSP5080ZW 50 582 600 615 668 713 757 801 874
1 pullout (depth 50 cm)
no back section
76,0 1 odour trap
1 frame with 3 waste bins, Container change
contents 1x 14 ltr., 1x 10 ltr. and ANTSP20L 0
2,5 2,5
20 1x 10 ltr. with bio lid
in addition 2x 2.5 ltr.
10
14 1 metal water drip floor
10

Available height 34.5 cm to carcase top edge!

A minimum distance of 6.5 cm to the worktop front edge is essential for the cut-out!
Please pay attention to the measurements of the integrated sink.

22.10 1/2022
 Price group
Sink units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Sink waste bin unit Carcase depth 56 cm
no rear panel CTSP6080ZW 60 601 624 648 698 756 813 842 917
1 pullout (depth 50 cm)
no back section
76,0 1 odour trap
1 frame with 3 waste bins, Container change
contents 1x 20 ltr., 1x 10 ltr. and ANTSP20L 0
2,5 2,5
20 1x 10 ltr. with bio lid
in addition 2x 2.5 ltr.
10
20 1 metal water drip floor
10

Available height 34.5 cm to carcase top edge!

Sink waste bin unit Carcase depth 56 cm

no rear panel CTSP6080ZBS 60 581 600 624 677 722 764 811 884
1 pullout with BLANCOSELECT-
waste disposal system (depth 40 cm)
76,0 1 extendible system lid
2 waste bins, Container change
contents 1x 30 ltr. and 1x 19 ltr. ANTSP15L 0
1 metal water drip floor ANTSP8L 0

30 19 Available height 41 cm to carcase top edge!

Sink pullout unit Carcase depth 56 cm

no rear panel CTSP5080Z2 50 641 686 704 755 814 873 944 1030
26,25
1 pullout (depth 30 cm) with drawer pan CTSP6080Z2 60 656 699 722 771 839 906 985 1073
and wooden back piece
46,25 1 cut-out cover for pop-up-waste
for installation on site
14,5-29,5 cut-out width 14.5 up to 29.5 cm
1 pullout (depth 45 cm)
25 1 metal water drip floor C1

upper pullout Recycling containers for fitting on site.

Usable height of the lower pullout 39.5 cm.

Sink pullout unit Carcase depth 56 cm

no rear panel CTSP8080Z2 80 862 899 938 1038 1137 1238 1369 1494
26,25
1 pullout (depth 45 cm) with drawer pan CTSP9080Z2 90 910 948 1005 1093 1200 1306 1443 1573
and wooden back piece CTSP10080Z2 100 945 974 1034 1119 1238 1356 1473 1607
46,25 1 cut-out cover for pop-up-waste CTSP12080Z2 120 967 999 1062 1145 1274 1403 1495 1629
for installation on site
cut-out width 14.5 up to 29.5 cm
14,5-29,5
1 pullout (depth 45 cm)
25 1 metal water drip floor C1

Recycling containers for fitting on site.

Usable height of the lower pullout 39.5 cm.
upper pullout

Sink waste bin unit Carcase depth 56 cm

no rear panel CTSP5080Z2W 50 821 883 906 949 1002 1057 1114 1214
26,25
1 pullout (depth 30 cm) with drawer pan
and wooden back piece
46,25 1 cut-out cover for pop-up-waste
for installation on site Container change
cut-out width 14.5 up to 29.5 cm ANTSP20L 0
20 1 pullout (depth 50 cm)
2,5 2,5
no back section C1
10
14 1 odour trap
10
1 frame with 3 waste bins,
contents 1x 14 ltr., 1x 10 ltr. and
14,5-29,5
1x 10 ltr. with bio lid
25 in addition 2x 2.5 ltr.
1 metal water drip floor
upper pullout
Available height 34.5 cm to carcase top edge!

A minimum distance of 6.5 cm to the worktop front edge is essential for the cut-out!
Please pay attention to the measurements of the integrated sink.

1/2022 22.11
 Price group
Sink units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Sink waste bin unit Carcase depth 56 cm
no rear panel CTSP6080Z2W 60 835 898 922 962 1027 1090 1148 1251
26,25
1 pullout (depth 30 cm) with drawer pan
and wooden back piece
46,25 1 cut-out cover for pop-up-waste
for installation on site Container change
cut-out width 14.5 up to 29.5 cm ANTSP20L 0
2,5 2,5
20 1 pullout (depth 50 cm)
no back section C1
10
20 1 odour trap
10
1 frame with 3 waste bins,
contents 1x 20 ltr., 1x 10 ltr. and
14,5-29,5
1x 10 ltr. with bio lid
25 in addition 2x 2.5 ltr.
1 metal water drip floor

upper pullout Available height 34.5 cm to carcase top edge!

Sink waste bin unit Carcase depth 56 cm

no rear panel CTSP8080Z2W 80 1076 1108 1169 1264 1357 1448 1580 1722
26,25
1 pullout (depth 45 cm) with drawer pan CTSP9080Z2W 90 1126 1166 1240 1326 1425 1526 1667 1816
and wooden back piece CTSP10080Z2W 100 1165 1199 1273 1343 1472 1600 1698 1851
46,25 1 cut-out cover for pop-up-waste CTSP12080Z2W 120 1200 1235 1294 1365 1514 1665 1716 1871
for installation on site
cut-out width 14.5 up to 29.5 cm
1 pullout (depth 45 cm)
1 odour trap C1
2,5 12
1 frame with 4 waste bins,
8 18 contents 1x 18 ltr., 1x 12 ltr.,
1x 8 ltr. with bio lid and 1x 2.5 ltr.
14,5-29,5 1 metal water drip floor
25
Available height 41 cm to carcase top edge!

upper pullout

Sink unit with back wall MPRU 44

1 cover for on-site hose cutout

If a rear panel is required for a sink unit,

please always order this unit with the code MP RU.

Opening support for HFO3 175

sink pullout cupboards
Plinth base prepared for electrical unit
Operation using sensor in the plinth area
Integrated orientation light, can be switched off
110 - 230 volt
Intensity adjustable
Dimensions 16 x 30 x 3.5 cm
Cable length 200 cm, plug-in power supply
internationally adaptable, colour grey
Water protection shelf is deleted

From cupboard width 40 cm.

Door gap enlargement not necessary.

Container change .
1x 20 ltr. container with bio lid ANTSP20L 0
instead of 2x 10 ltr. containers

Container change BLANCOSELECT .

3x 15 ltr. containers with 1 bio lid ANTSP15L 0
instead of 1x 30 ltr. and 1x 19 ltr. containers

2x 8 ltr. containers with 1 bio lid ANTSP8L 0

instead of 1x 19 ltr. container

A minimum distance of 6.5 cm to the worktop front edge is essential for the cut-out!
Please pay attention to the measurements of the integrated sink.

22.12 1/2022
 Price group
Sink units for hot water taps
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Hot water towel unit Carcase depth 56 cm
no rear panel CTQ6080 L/R 60 361 381 403 458 499 543 591 636
1 door
1 compartment 36.7 cm wide for taps
accessories
76,0 1 middle side removable
Diagram shows R
1 compartment 18.4 cm wide with towel holder
1 solid base, above

The compartment for taps accessories determines

style left or right.

Sink pullout unit for Carcase depth 56 cm

hot water taps Door width 30 cm
no rear panel CTSPA9080TZ L/R 90 602 628 680 763 854 948 1022 1108
1 door 30 cm or 40 cm wide in front of Door width 40 cm
76,0

compartment for taps accessories CTSPQ10080TZ L/R 100 610 639 692 782 872 970 1052 1137
1 middle side removable
Diagram shows R 1 pullout 60 cm wide (depth 45 cm)
1 metal water drip floor

Recycling containers for fitting on site.

Sink waste bin unit for Carcase depth 56 cm

hot water taps Door width 30 cm
no rear panel CTSPA8080TZW L/R 80 719 742 785 872 942 1015 1102 1197
1 door 30 cm or 40 cm wide in front of Door width 40 cm
76,0

compartment for taps accessories CTSPQ9080TZW L/R 90 727 754 796 890 960 1037 1132 1226
1 middle side removable
Diagram shows R 1 pullout 50 cm wide (depth 50 cm)
1 odour trap
1 frame with 3 waste bins, Container change
26,7 contents 1x 14 ltr., 1x 10 ltr. and ANTSP20L 0
36,7 1x 10 ltr. with bio lid
2,5 2,5 in addition 2x 2.5 ltr.
10 1 metal water drip floor
14
10
Available height 34.5 cm to carcase top edge!

Sink waste bin unit for Carcase depth 56 cm

hot water taps Door width 30 cm
no rear panel CTSPA9080TZW L/R 90 737 766 818 902 984 1070 1143 1242
1 door 30 cm or 40 cm wide in front of Door width 40 cm
76,0

compartment for taps accessories CTSPQ10080TZW L/R 100 746 778 829 920 1002 1092 1173 1271
1 middle side removable
Diagram shows R 1 pullout 60 cm wide (depth 50 cm)
1 odour trap
1 frame with 3 waste bins, Container change
26,7 contents 1x 20 ltr., 1x 10 ltr. and ANTSP20L 0
36,7 1x 10 ltr. with bio lid
2,5 2,5 in addition 2x 2.5 ltr.
10 1 metal water drip floor
20
10
Available height 34.5 cm to carcase top edge!

Sink waste bin unit for Carcase depth 56 cm

hot water taps Door width 30 cm
no rear panel CTSPA9080TZBS L/R 90 718 742 794 881 950 1023 1112 1208
1 door 30 cm or 40 cm wide in front of Door width 40 cm
76,0

compartment for taps accessories CTSPQ10080TZBS L/R 100 726 754 805 900 968 1044 1142 1237
1 middle side removable
Diagram shows R 1 pullout with BLANCOSELECT-
waste disposal system (depth 40 cm)
1 extendible system lid Container change
26,7 2 waste bins, ANTSP15L 0
36,7 contents 1x 30 ltr. and 1x 19 ltr. ANTSP8L 0
1 metal water drip floor
30 19
Available height 41 cm to carcase top edge!

The compartment for taps accessories determines style left or right.

The true width for the installation of boilers and cartridges is 26.7 cm or 36.7 cm.
Please plan sink installation above pullout, available height to carcase top edge see respective cupboard!

1/2022 22.13
 Price group
Corner sink units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Corner sink unit Carcase depth 56 cm
Planning depth 65 resp. 75 cm Door width 40 cm
Actual space 105 (102 up to 118 cm) CTEESP10580 L/R 100 456 482 539 628 709 793 860 939
Door width 45 cm
Actual space 110 (107 up to 123 cm) CTEESP11080 L/R 100 456 482 539 628 709 793 860 939
76,0

Door width 50 cm
Actual space 115 (112 up to 128 cm) CTEESP11580 L/R 100 456 482 539 628 709 793 860 939
Diagram shows L
Door width 60 cm
Actual space Actual space 125 (122 up to 138 cm) CTEESP12580 L/R 100 534 560 617 706 787 871 938 1017
1.7 no rear panel
Pl.depth

56/66 1 door
100 1 metal water drip floor
7.3 1 inner blender with angle blender CTPEEW780 7 0 0 0 0 0 0 0 0
Door width adjustable from 4 to 10 cm
Extra charge per 5 cm additional CMPTP5 5 6 8 8 8 11 14 14 16
width (up to max. 20 cm)

Diagonal corner sink unit 135° Carcase depth 56 cm

Floor dimensions 91.7 x 91.7 cm CTEDSP9280 L/R 90 511 529 557 619 663 705 763 832
1 door, 40 cm wide
Not available in IOS-C, IOS-M-C
2 corner blenders
1 metal water drip floor
76,0

Diagram shows L
On request supplied unassembled.

90
66
90
66

,5
39

Please note: when placing an order, it is imperative to specify the actual floor measurement, the angle blender CTPEEW 7 .. is adapted at factory.
The legs of the angle blender are free to choose from 4 - 10 cm width. For more than 10 cm please note extra charge MP TP 5.

Price group
Waste disposal floor units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Waste bin floor unit Carcase depth 56 cm
1 pullout (depth 50 cm) CT3080ZISWH 30 610 626 627 699 751 801 834 910
1 inner drawer CT4080ZISWH 40 626 643 645 716 779 841 882 962
1 odour trap
76,0 1 frame with 1 waste bin,
contents 1x 32 ltr.

32

Waste bin floor unit Carcase depth 56 cm

1 pullout (depth 50 cm) CT4580ZISWH 45 633 652 655 724 792 858 904 985
1 inner drawer CT5080ZISWH 50 641 661 664 732 807 881 929 1012
1 odour trap
76,0
1 frame with 2 waste bins,
contents 2x 32 ltr.

32

32

Waste bin floor unit Carcase depth 56 cm

1 pullout (depth 50 cm) CT6080ZISWH 60 690 710 716 782 862 942 995 1085
1 inner drawer
1 odour trap
76,0

1 frame with 4 waste bins,

contents 2x 32 ltr., 1x 10 ltr. and
1x 10 ltr. with bio lid
32 10

32 10

22.14 1/2022
 Surface style
Floor shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 79.5 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Floor shelf unit Shelf unit depth 36.2 cm
2 adjustable shelves TR308036 10-30 316 329 432 537 - 598 684 561
TR408036 30-40 332 345 468 583 - 649 743 611
Widths in mm grid variably available. TR458036 40-45 340 353 486 606 - 674 772 636
Please state desired width. TR508036 45-50 347 361 503 629 - 700 802 659
TR608036 50-60 363 377 539 674 - 750 860 707
TR908036 60-90 410 425 646 811 - 902 1036 853

Shelf unit depth 58.2 cm

TR3080 10-30 330 343 454 563 - 627 717 607
TR4080 30-40 348 361 487 606 - 673 773 658
TR4580 40-45 356 370 504 627 - 698 801 683
TR5080 45-50 365 380 521 648 - 721 827 707
TR6080 50-60 383 398 555 691 - 769 882 756
TR9080 60-90 437 452 657 820 - 913 1047 904

Depth extensions 68.2 cm ANUT68 26 27 30 36 38 40 46 44

for floor shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.

Surface style
Floor shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 79.5 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Floor shelf unit, Shelf unit depth 36.2 cm
thick 2.8 cm T3R308036 10-30 415 429 543 657 692 726 820 698
Back panel with circumferential shadow joint T3R608036 30-60 477 493 677 829 873 916 1040 879
2 shelves T3R908036 60-90 536 552 807 995 1048 1100 1254 1054

Shelf unit interior colour = shelf unit exterior colour. Shelf unit depth 58.2 cm
Widths in mm grid variably available. T3R3080 10-30 433 447 571 691 727 762 863 752
Please state desired width. T3R6080 30-60 505 522 703 857 902 947 1078 945
Available without extra charge for free standing T3R9080 60-90 573 592 831 1017 1072 1127 1286 1133
planning, optional without back panel with visible
edges at the rear. Please state on order.

Depth extensions 68.2 cm ANUT68 26 27 30 36 38 40 46 44

for floor shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Price group
Floor units
Carcase height 16.5 cm, carcase depth 56 cm
Neutral

Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Under worktop drawer Carcase depth 56 cm
13,0 Carcase height 16.5 cm CT3017S 30 185 193 207 231 234 239 260 282
1 drawer CT4017S 40 189 199 210 234 240 242 271 294
CT4517S 45 192 204 213 237 246 256 281 305
CT5017S 50 195 208 216 240 253 272 292 318
CT6017S 60 200 212 220 244 265 282 305 334
CT8017S 80 218 225 233 263 290 314 335 364
CT9017S 90 224 232 242 275 299 326 345 376
CT10017S 100 231 241 248 283 310 340 355 388
CT12017S 120 243 259 267 304 331 364 375 409

1/2022 22.15
 Price group
Floor units
Carcase height 49.75 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Floor unit Carcase depth 56 cm
1 door CT3050 L/R 30 209 224 235 276 295 313 348 379
46,25 1 adjustable shelf CT4050 L/R 40 218 229 240 282 307 335 358 391
CT4550 L/R 45 222 232 242 286 313 342 376 409
Diagram shows L CT5050 L/R 50 224 237 245 287 317 348 384 417
CT6050 L/R 60 231 248 254 311 348 384 408 447

Floor unit Carcase depth 56 cm

2 doors CT8050 80 293 314 343 409 468 526 558 608
1 adjustable shelf CT9050 90 310 338 360 432 486 541 583 635
46,25 CT10050 100 313 347 364 448 504 559 597 650
120 cm unit with centre post. CT12050 120 341 374 386 482 538 592 634 691

Pullout unit Carcase depth 56 cm

1 pullout CT3050Z 30 305 323 349 402 443 481 527 576
CT4050Z 40 312 329 355 407 449 486 536 583
46,25
CT4550Z 45 317 336 361 416 457 498 547 596
CT5050Z 50 326 344 370 426 466 509 558 608
CT6050Z 60 335 351 378 435 477 521 572 622
CT8050Z 80 368 387 418 482 529 578 634 691
CT9050Z 90 490 514 553 634 695 756 828 903
CT10050Z 100 567 595 640 731 798 866 951 1036
CT12050Z 120 642 674 726 826 902 976 1072 1169

Price group
Sink units
Carcase height 49.75 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Sink pullout unit Carcase depth 56 cm
no rear panel CTSP6050Z 60 349 359 378 416 464 514 559 609
46,25
1 pullout (depth 45 cm) CTSP9050Z 90 423 439 472 528 598 667 766 835
with lowered wooden back piece CTSP12050Z 120 580 650 686 703 785 869 957 1044
14,5-29,5 1 cut-out cover for pop-up-waste
for installation on site
25 cut-out width 14.5 up to 29.5 cm
1 metal water drip floor

Sink unit with back wall MPRU 44

1 cover for on-site hose cutout

If a rear panel is required for a sink unit,

please always order this unit with the code MP RU.

Floor units with a carcase height of 49.75 cm have the standard plinth with heights of between 7 and 20 cm. This type is intended for planning to use
finishing tops or further cupboards. If a plinth height of more than 20 cm is needed, possibly with recessed plinth blender or for free standing floor unit
groups (island solutions), then a plinth platform SOPOD is essential, see page 70.02.

22.16 1/2022
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 49.75 cm
Side depth 34 cm FS5034 L/R 34 0 0 44 65 93 117 62
Side depth 46 cm FS5046 L/R 46 0 0 65 93 129 161 84

Carcase height 79.5 cm

Side depth 34 cm FS8034 L/R 34 0 0 62 87 121 153 79
Diagram shows R Side depth 46 cm FS8046 L/R 46 0 0 102 147 207 258 135

Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all floor units FSUL L/R 73 73 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 49.75 cm
Side depth up to 34 cm FSUEL5034 L/R 34 66 66 110 131 159 183 128
Side depth up to 46 cm FSUEL5046 L/R 46 66 66 131 159 195 227 150
Side depth up to 58 cm FSUEL5058 L/R 58 66 66 131 159 195 227 150
Diagram shows R Side depth up to 63 cm FSUEL5063 L/R 63 66 66 143 178 224 267 171
Side depth up to 68 cm FSUEL5068 L/R 68 107 107 184 219 265 308 212

Carcase height 79.5 cm

Side depth up to 34 cm FSUEL8034 L/R 34 66 66 128 153 187 219 145
Side depth up to 46 cm FSUEL8046 L/R 46 66 66 168 213 273 324 201
Side depth up to 58 cm FSUEL8058 L/R 58 66 66 168 213 273 324 201
Side depth up to 63 cm FSUEL8063 L/R 63 66 66 180 232 302 363 223
Side depth up to 68 cm FSUEL8068 L/R 68 107 107 221 273 343 404 264
Side depth up to 76 cm FSUEL8076 L/R 76 107 107 230 287 360 422 273

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“ on page 10.07.

Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit end panel Carcase height 49.75 cm
with recessed handle above Depth up to 62.5 cm
Front finish CTW55058 L/R 5 248 257 294 325 348 370 393 427
wall-bound solution (one-sided)
Width 5 cm Depth up to 70.0 cm
76,0
CTW55068 L/R 5 259 270 351 398 423 450 475 517
Please state the relevant L/R.
Diagram shows L The end panel width is always 5 cm.
Carcase height 79.5 cm
Depth up to 62.5 cm
CTW58058 L/R 5 252 262 299 332 357 379 403 430

Depth up to 70.0 cm
CTW58068 L/R 5 264 278 359 408 433 461 485 521

Floor unit end panel Carcase height 49.75 cm

with recessed handle above CTWI550 5 340 353 413 484 513 538 566 615
Front finish
island-solution (two-sided)
76,0 depth max. 120 cm Carcase height 79.5 cm
Width 5 cm CTWI580 5 351 360 421 496 526 552 581 621

Please state the required depth, max. 120 cm is possible.

The end panel width is always 5 cm.

1/2022 22.17
 Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit end panel Carcase height 79.5 cm
with recessed handle above Depth up to 62.5 cm
26,25 Front finish CTW58058Z2 L/R 5 328 337 374 407 431 455 479 510
wall-bound solution (one-sided)
46,25 Width 5 cm Depth up to 70.0 cm
Divided in height 46.25 cm CTW58068Z2 L/R 5 340 353 433 484 509 537 560 601
Diagram shows L
with recessed handle

Please state the relevant L/R.

The end panel width is always 5 cm.

Floor unit end panel Carcase height 79.5 cm

with recessed handle above CTWI580Z2 5 425 434 496 572 602 628 656 702
26,25 Front finish
island-solution (two-sided)
46,25 depth max. 120 cm
Width 5 cm
Divided in height 46.25 cm
with recessed handle

Please state the required depth, max. 120 cm is possible.

The end panel width is always 5 cm.

Floor unit end panel Carcase height 79.5 cm

with recessed handle above Depth up to 62.5 cm
26,25 Front finish C1TW58058Z2 L/R 5 328 337 374 407 431 455 479 510
wall-bound solution (one-sided)
49,5 Width 5 cm Depth up to 70.0 cm
Divided in height 49.5 cm C1TW58068Z2 L/R 5 340 353 433 484 509 537 560 601
Diagram shows L
Please state the relevant L/R.
The end panel width is always 5 cm.

Floor unit end panel Carcase height 79.5 cm

with recessed handle above C1TWI580Z2 5 425 434 496 572 602 628 656 702
26,25 Front finish
island-solution (two-sided)
49,5 depth max. 120 cm
Width 5 cm
Divided in height 49.5 cm

Please state the required depth, max. 120 cm is possible.

The end panel width is always 5 cm.

Side panel extension ANW5VERL 43 44 52 60 63 65 69 74

Side panel extended by plinth height
Interior visible side colour lacquered,
please state colour FS.

Connection to dishwasher ANW5GSM 46

Interior visible side colour lacquered,
please state colour FS.
Side plinth attached,
state plinth colour.

0,25 Door joint connection at the rear ANW5ANS 25

The side panel has the original edge style and
door joint on the reverse side.

For connection of the floor unit end panel to

cupboards or to a second floor unit end panel,
e.g. to deep isles.

22.18 1/2022
 Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit panel Basic type
with side shelf unit area Carcase height 79.5 cm
1 recessed handle below the worktop Depth up to 62.5 cm
front and side CTW158058R L/R 15 610 634 676 760 830 901 976 1064
1 fixed front at the front
76,0
with side frame in front colour Depth up to 70.0 cm
Diagram shows R 1 shelf CTW158068R L/R 15 635 659 703 791 864 938 1016 1107
Always state interior style,
possible colours see chapter 11! Extra charge interior
MPK/KH/KG 0
Without plinth! MPFF/PF/VM 101
The plinth end finishes at the last cupboard. MPFS/ME 147
MPFG 231
MPH 207
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
VALAIS-C

Floor unit-island side panel Basic type

with side shelf unit area Carcase height 79.5 cm
1 recessed handle below the worktop CTWI1580R 15 710 740 788 885 968 1051 1137 1241
front, rear and side
1 fixed front at the front and rear Extra charge interior
76,0 with side frames in front colour MPK/KH/KG 0
1 shelf MPFF/PF/VM 196
Always state interior style, MPFS/ME 286
possible colours see chapter 11! MPFG 450
MPH 377
Please state the required depth, max. 120 cm is possible.
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
Without plinth!
VALAIS-C
The plinth end finishes at the last cupboard.

Floor unit panel Basic type

with side shelf unit area in two parts Carcase height 79.5 cm
26,25 1 recessed handle below the worktop Depth up to 62.5 cm
front and side CTW158058R2 L/R 15 826 857 913 1027 1123 1217 1320 1439
1 fixed front at the front
46,25
with side frame in front colour Depth up to 70.0 cm
Diagram shows R 1 recessed handle at the front and side, CTW158068R2 L/R 15 858 892 950 1067 1167 1267 1373 1497
46.25 cm high
1 fixed front at the front Extra charge interior
with side frame in front colour MPK/KH/KG 0
Always state interior style, MPFF/PF/VM 101
possible colours see chapter 11! MPFS/ME 147
MPFG 231
Without plinth! MPH 207
The plinth end finishes at the last cupboard.
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
VALAIS-C

Floor unit-island side panel Basic type

with side shelf unit area in two parts Carcase height 79.5 cm
26,25 1 recessed handle below the worktop CTWI1580R2 15 1062 1105 1177 1319 1442 1565 1699 1852
front, rear and side
1 fixed front at the front and rear Extra charge interior
46,25 with side frames in front colour MPK/KH/KG 0
1 recessed handle at the front, rear and side, MPFF/PF/VM 196
46.25 cm high MPFS/ME 286
1 fixed front at the front and rear MPFG 450
with side frames in front colour MPH 377
Always state interior style,
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
possible colours see chapter 11!
VALAIS-C
Please state the required depth, max. 120 cm is possible.
Without plinth!
The plinth end finishes at the last cupboard.

Connection to dishwasher ANW15GSM 46

Interior visible side colour lacquered,
please state colour FS.
Side plinth attached,
state plinth colour.

1/2022 22.19
 Price group
45° mitre end panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
45° mitre end panel Carcase height 49.75 cm
with recessed handle above Depth up to 62.5 cm
Front finish CTW55058K45 L/R 5 248 257 294 325 348 370 393 427
76,0 wall-bound solution (one-sided)
on the front with 45° chamfered edge for mitre Depth up to 70.0 cm
Diagram shows L transition with floor unit front CTW55068K45 L/R 5 259 270 351 398 423 450 475 517
Width 5 cm

Carcase height 79.5 cm

Depth up to 62.5 cm
CTW58058K45 L/R 5 252 262 299 332 357 379 403 430

Depth up to 70.0 cm
CTW58068K45 L/R 5 264 278 359 408 433 461 485 521
Carcase height 49.75 / 79.5 cm
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C

45° mitre end panel for isles Carcase height 49.75 cm

with recessed handle above CTWI550K45 5 340 353 413 484 513 538 566 615
Front finish
76,0 island-solution (two-sided)
depth max. 120 cm Carcase height 79.5 cm
both sides with 45° chamfered edge for mitre CTWI580K45 5 351 360 421 496 526 552 581 621
transition with floor unit fronts
Carcase height 49.75 / 79.5 cm
Width 5 cm
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C

45° mitre end panel Carcase height 79.5 cm

26,25 with recessed handle above Depth up to 62.5 cm
Front finish CTW58058K45Z2 L/R 5 328 337 374 407 431 455 479 510
46,25 wall-bound solution (one-sided)
on the front with 45° chamfered edge for mitre Depth up to 70.0 cm
Diagram shows L transition with floor unit front CTW58068K45Z2 L/R 5 340 353 433 484 509 537 560 601
Width 5 cm
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C
Divided in height 46.25 cm
with recessed handle

45° mitre end panel for isles Carcase height 79.5 cm

26,25 with recessed handle above CTWI580K45Z2 5 425 434 496 572 602 628 656 702
Front finish
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C
46,25 island-solution (two-sided)
depth max. 120 cm
both sides with 45° chamfered edge for mitre
transition with floor unit fronts
Width 5 cm
Divided in height 46.25 cm
with recessed handle

45° mitre end panel Carcase height 79.5 cm

26,25 with recessed handle above Depth up to 62.5 cm
Front finish C1TW58058K45Z2 L/R 5 328 337 374 407 431 455 479 510
49,5 wall-bound solution (one-sided)
on the front with 45° chamfered edge for mitre Depth up to 70.0 cm
transition with floor unit front C1TW58068K45Z2 L/R 5 340 353 433 484 509 537 560 601
Diagram shows L Width 5 cm
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C
Divided in height 49.5 cm

45° mitre end panel for isles Carcase height 79.5 cm

26,25 with recessed handle above C1TWI580K45Z2 5 425 434 496 572 602 628 656 702
Front finish
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C
49,5 island-solution (two-sided)
depth max. 120 cm
both sides with 45° chamfered edge for mitre
transition with floor unit fronts
Width 5 cm
Divided in height 49.5 cm

Can be ordered in connection with processing type AN 5K45 see page 10.04. Please state L/R.
Please plan side panel depth flush-front, i.e. total depth to carcase edge + 2 mm (with C1 4 mm) + front thickness.

22.20 1/2022
 Price group
45° mitre end panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Side panel extension ANW5VERL 43 44 52 60 63 65 69 74
Side panel extended by plinth height
Interior visible side colour lacquered,
please state colour FS.

0,25 Door joint connection at the rear ANW5ANS 25

The side panel has the original edge style and
door joint on the reverse side.

For connection of the floor unit end panel to

cupboards or to a second floor unit end panel,
e.g. to deep isles.

Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit blender Carcase height 49.75 cm
with recessed handle above CTP2050 L/R 20 48 51 56 62 67 72 74 81
Front finish
Carcase height 79.5 cm
76,0
Front finish blenders are manufactured with a maximum CTP2080 L/R 20 64 67 72 79 89 96 97 105
Diagram shows L 20 cm width.

Floor unit blender Carcase height 79.5 cm

26,25 with division CTP2080Z2 L/R 20 108 111 117 123 130 138 139 153
with recessed handle above
46,25 Divided in height 46.25 cm
with recessed handle
Diagram shows L Front finish

Front finish blenders are manufactured with a maximum

20 cm width.

Floor unit blender Carcase height 79.5 cm

26,25 with division C1TP2080Z2 L/R 20 108 111 117 123 130 138 139 153
with recessed handle above
49,5 Divided in height 49.5 cm
Front finish
Diagram shows L
Front finish blenders are manufactured with a maximum
20 cm width.

Blenders between units ANB1 L/R 36 38 40 43 50 55 60 65

1 additional longitudinal edge in
Not available in BOSSA-C
original style
1 door joint connection strip

Possible from 6.5 cm width.

Extra charge for blender width MPST65 38

less than 6.5 cm
Not available in BOSSA-C
Minimum blender width 2 cm
Diagram shows R 1 longitudinal edge smooth,
not in original style

This style form is not recommended.

Please state L/R!

1/2022 22.21
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit corner blender 90° Carcase height 49.75 cm
with recessed handle above CTPE50 10 102 104 120 136 143 149 163 177
Front finish
freely selectable leg measurement Carcase height 79.5 cm
76,0
from 4 x 4 cm to 10 x 10 cm width CTPE80 10 116 118 136 155 165 176 186 205
4
Flush with front.
Please state rear length (inside measurement)
from l to r on order.
4

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

Floor unit corner blender 90° Carcase height 79.5 cm

26,25 with division CTPE80Z2 10 159 161 180 196 210 220 231 250
with recessed handle above
Divided in height 46.25 cm
46,25
with recessed handle
4 Front finish
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width
4

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

Floor unit corner blender 90° Carcase height 79.5 cm

26,25 with division C1TPE80Z2 10 159 161 180 196 210 220 231 250
with recessed handle above
Divided in height 49.5 cm
49,5
Front finish
4 freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

4

Please state rear length (inside measurement)

from l to r on order.

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

Floor unit corner blender Carcase height 49.75 cm

with recessed handle above CTPEW50 10 119 122 134 159 162 165 175 190
Front finish
Freely selectable angle up to max. 270° Carcase height 79.5 cm
76,0 (Programme BOSSA-C permitted up to 180°) CTPEW80 10 131 134 157 174 182 191 201 219
and freely selectable leg measurement from
3 Carcase height 49.75 / 79.5 cm
3 x 3 cm up to 10 x 10 cm width
Not available in IOS-C, IOS-M-C
3

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

22.22 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit corner blender Carcase height 79.5 cm
with division CTPEW80Z2 10 175 178 200 218 226 235 243 268
26,25
with recessed handle above
Not available in IOS-C, IOS-M-C
Divided in height 46.25 cm
46,25 with recessed handle
Front finish
3 Freely selectable angle up to max. 270°
(Programme BOSSA-C permitted up to 180°)
3

and freely selectable leg measurement from

3 x 3 cm up to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

Floor unit corner blender Carcase height 79.5 cm

with division C1TPEW80Z2 10 175 178 200 218 226 235 243 268
26,25
with recessed handle above
Not available in IOS-C, IOS-M-C
Divided in height 49.5 cm
49,5 Front finish
Freely selectable angle up to max. 270°
3 (Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3

3 x 3 cm up to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

Surface style
Support panels with plinth Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MC H
Support panel with plinth For carcase height 79.5 cm
for blender CTWSP8056 L/R 56 110 110 202 266 289 311 354 272
Thickness 1.6 cm CTWSP8066 L/R 66 119 119 230 303 328 352 399 311
prepared for connection to
floor unit blenders with
recessed handle milling

Diagram shows R Only as accessory type for blenders CTP ..,

not available loose!
For use of dishwasher or open niche.
Visible side points towards dishwasher or to the
open niche. Please state type left/right.

Support panel with plinth up to

Thickness 1.6 cm For carcase height 79.5 cm
both sides finished TWS8058 L/R 63 83 83 176 241 265 289 332 242
TWS8068 L/R 70 97 97 192 265 298 331 380 279
Please state required depth.
Please state whether placed L/R and plinth height.
Fit plinth return on site.
Diagram shows R Plinth height 1.5 cm larger for floor adjustment.

1/2022 22.23
 Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Floor unit blender Carcase height 49.75 cm
flush with carcase TSB2050 20 24 34 36 42 48 53 61 46

Carcase height 79.5 cm

TSB2080 20 36 40 44 58 63 67 79 53

Surface style
Rear panels Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Height KH KG VM ME FG MC H
Rear panel per metre
type of visible side charge per started 10 cm
Texture direction is vertical RW80 80 185 185 295 312 337 358 353
in variable sizes
with loose plinth
Max. length 260 cm (detailed dimension information
can be found in chapter 71).

Rear panels show matching

front colour on visible side only,
back of rear panel to our choice.
Over depth worktop necessary,
no plinth steps possible.

Length connection per top part

tongue and groove joint VL 23
without pop-up fitting

Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front RWF80 208 229 327 372 414 468 509 549
in variable sizes
Height up to 79.25 cm Not available in IOS-C, IOS-M-C
79,25
Max. width 250 cm (detailed dimension information
can be found on page 71.14).
without recessed handle
with loose plinth

With rear panel, it is essential that worktop is over depth.

Minimum charged 0.5 metres.

Rear panel in per metre

front finish charge per started 10 cm
Texture direction as front RWF93 233 256 366 417 463 524 570 615
in variable sizes
Height up to 92.5 cm Not available in IOS-C, IOS-M-C
92,5 Max. width 250 cm (detailed dimension information
can be found on page 71.14).
without recessed handle
with loose plinth

With rear panel, it is essential that worktop is over depth.

Minimum charged 0.5 metres.

Rear panel in RWF3080 30 85 96 119 145 182 222 270 300

front finish RWF4080 40 91 99 122 152 194 240 286 320
in fixed front sizes RWF4580 45 96 103 125 159 201 243 292 332
without recessed handle RWF5080 50 98 105 128 161 213 261 302 341
with loose plinth RWF6080 60 103 116 136 171 225 280 338 376
79,25
For carcase height 79.5 cm old RW .. 80

With rear panel, it is essential that worktop is over depth.

22.24 1/2022
 Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in RWF3093 30 95 108 133 162 204 249 302 336
front finish RWF4093 40 102 112 136 171 218 269 321 358
in fixed front sizes RWF4593 45 108 116 141 178 224 272 327 372
without recessed handle RWF5093 50 110 118 144 181 239 292 338 383
with loose plinth RWF6093 60 116 129 153 191 252 314 378 422
92,5 old RW .. 93
With rear panel, it is essential that worktop is over depth.

Rear panel in CRWF3080 30 169 179 207 236 265 290 338 367
front finish CRWF4080 40 175 184 220 248 282 312 357 390
with recessed handle above CRWF4580 45 185 192 223 256 288 318 365 399
with loose plinth CRWF5080 50 189 200 232 268 302 339 379 414
For carcase height 79.5 cm CRWF6080 60 204 212 243 282 320 357 415 453
CRWF8080 80 220 225 261 299 343 386 448 489
Please state measurement X, min. 4 cm! CRWF9080 90 232 237 274 316 360 406 472 515
X CRWF10080 100 242 250 287 331 382 429 499 544
With rear panel, it is essential that worktop is over depth. CRWF12080 120 249 278 316 355 420 474 549 599
old CRW .. 80

Rear panel in CRWF3080Z2 30 447 457 484 514 542 568 615 644
C1
front finish CRWF4080Z2 40 453 462 498 526 559 589 634 668
with recessed handle above CRWF4580Z2 45 463 469 501 535 567 597 643 677
Divided in height 46.25 cm CRWF5080Z2 50 466 476 510 545 580 616 658 691
with recessed handle CRWF6080Z2 60 481 490 521 559 598 634 692 731
with loose plinth CRWF8080Z2 80 498 504 539 577 620 664 726 766
For carcase height 79.5 cm CRWF9080Z2 90 510 515 551 595 638 685 750 793
X CRWF10080Z2 100 520 528 566 609 660 706 777 822
Please state measurement X, min. 4 cm! CRWF12080Z2 120 527 555 595 632 697 752 827 877
old CRW .. 80 Z2
With rear panel, it is essential that worktop is over depth.

Price group
Original fronts

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Front part height 13.0 cm CFT030013 30 42 45 55 67 80 95 115 128
13,0 CFT040013 40 43 45 57 71 87 101 121 134
Please state intended purpose. CFT045013 45 43 50 58 72 89 103 124 140
CFT050013 50 43 51 60 77 96 111 130 151
CFT060013 60 44 53 62 79 100 118 140 160
CFT080013 80 60 71 81 104 133 165 183 213
CFT090013 90 64 73 89 114 146 178 196 227
CFT100013 100 67 77 95 121 159 193 209 245
CFT120013 120 73 82 110 135 180 225 233 283

Front part height 26.25 cm CFT030027 30 55 59 77 95 114 130 158 178

CFT040027 40 55 60 80 99 121 142 168 189
26,25 Please state intended purpose. CFT045027 45 55 66 81 101 122 143 173 196
CFT050027 50 55 67 85 105 129 155 177 203
CFT060027 60 59 71 87 112 136 163 196 222
CFT080027 80 126 139 158 200 241 284 332 358
CFT090027 90 130 146 163 204 244 287 335 361
CFT100027 100 134 152 169 208 247 291 338 365
CFT120027 120 139 157 174 212 250 294 340 369

Front part height 46.25 cm CFT030046 30 73 81 107 132 158 180 220 239
CFT040046 40 78 85 115 140 170 195 231 250
Please state intended purpose. CFT045046 45 78 93 116 148 173 199 237 259
CFT050046 50 79 96 121 154 183 216 244 269
46,25 CFT060046 60 83 100 125 158 190 225 275 298
CFT080046 80 143 162 196 267 323 377 464 508
CFT090046 90 157 165 201 284 339 393 481 524
CFT100046 100 171 183 229 320 387 454 556 606
CFT120046 120 195 218 267 368 451 529 652 710

Front part height 76.0 cm CFT030076 30 96 102 130 163 189 218 261 284
CFT040076 40 99 108 138 174 204 233 280 304
Please state intended purpose. CFT045076 45 99 115 140 177 211 239 287 312
CFT050076 50 100 118 151 182 219 251 298 326
76,0 CFT060076 60 107 125 161 193 235 276 332 361

1/2022 22.25
1/2022
CONTINO
Floor units, carcase height 86.25 cm

CARCASE LINE 86

Floor units Function cupboards Corner units Housing units Appliance fronts

24.01 24.02 24.04 24.05 24.08

T: 36 / 48 / 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm CGFV 45 86 M
CT 15 86 CT 15 86 ZR CTEE 105 86 3,5
CTH 60 86 Z CGFV 60 86 M
CT 20 86 CTEE 110 86 CTH 61 86 Z
CT 30 86 CTEE 115 86 CTH 76 86 Z
CT 40 86 CTEE 125 86 CTH 90 86 Z
41,0
CT 45 86
82,75

82,75
26,25
CT 50 86 82,75 82,75

CT 60 86
24.01 24.02 24.04 24.05 24.08
T: 36 / 48 / 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm CGFV 60 86 61 GZ2
CT 80 86 CT 15 86 ZH CTEE 110 86 LM 3,5
CTH 60 86 S
CT 90 86 CTEE 115 86 LM
CT 100 86 CTEE 125 86 LM

39,5
CT 120 86

82,75
82,75 82,75 19,25
39,75

24.01 24.02 24.04 24.05 24.08

T: 36 / 48 / 58 / 68 cm T: 58 / 68 cm T: 58 cm T: 58 / 68 cm CGFV 60 86 61 GSZ2
CT 30 86 IS2IZ CT 15 86 H CTE 82 86 K CTH 60 86 B

26,25 13,0
3,5
CT 40 86 IS2IZ CT 20 86 H CTH 76 86 B
CT 45 86 IS2IZ CT 30 86 H CTH 91 86 B
CT 50 86 IS2IZ
CT 60 86 IS2IZ
82,75

82,75

5,25
82,75 39,75

24.01 24.02 24.04 24.08

T: 36 / 48 / 58 / 68 cm T: 36 / 48 / 58 / 68 cm T: 58 cm C1GFV 60 86 Z2M
CT 80 86 IS2IZ CT 20 86 GVZ CTE 92 86 K
CT 90 86 IS2IZ CT 30 86 GVZ
CT 100 86 IS2IZ 39,5
82,75

82,75 82,75 Hob units 43,0

24.01 24.02 24.05 24.08

T: 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm C1GFV 60 86 SZ2M
CT 30 86 ZIZ CT 30 86 ZRK CTK 60 86 Z2 13,0
CT 40 86 ZIZ CTK 80 86 Z2
CT 45 86 ZIZ CTK 90 86 Z2

Floor units
39,5 26,25

CONTINO
CT 50 86 ZIZ CTK 100 86 Z2

86.25 cm
CT 60 86 ZIZ CTK 120 86 Z2
39,75

82,75 82,75 43,0

24.01 24.02 24.05 24.08

T: 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm CGFV 45 86 G
CT 30 86 ZIS2 CT 30 86 ZBR CTK 60 86 SZ2 CGFV 60 86 G
CT 40 86 ZIS2 13,0 CTK 80 86 SZ2 24.
CT 45 86 ZIS2 26,25
CTK 90 86 SZ2
CT 50 86 ZIS2 CTK 100 86 SZ2
CT 60 86 ZIS2 CTK 120 86 SZ2
39,75

82,75 82,75 82,75

24.01 T: 36 / 48 / 58 / 68 cm 24.03 T: 58 / 68 cm 24.07 T: 58 / 68 cm

CT 30 86 Z2 CT 30 86 ZISF CT 80 86 Z2 TV
CT 40 86 Z2 CT 90 86 Z2 TV
39,5 CT 45 86 Z2 39,5 CT 100 86 Z2 TV
CT 50 86 Z2 CT 120 86 Z2 TV
CT 60 86 Z2 39,75
39,75
CT 80 86 Z2 82,75
CT 90 86 Z2
CT 100 86 Z2
CT 120 86 Z2 24.03 T: 58 / 68 cm 24.07 T: 58 / 68 cm
24.02
CT 30 86 ZIS3K CT 80 86 BZ2 TV
T: 36 / 48 / 58 / 68 cm 13,0 CT 90 86 BZ2 TV
CT 30 86 Z2IS 26,25 CT 100 86 BZ2 TV
CT 40 86 Z2IS CT 120 86 BZ2 TV
39,5 CT 45 86 Z2IS 39,75
CT 50 86 Z2IS 82,75
CT 60 86 Z2IS
39,75
CT 80 86 Z2IS
CT 90 86 Z2IS 24.03
CT 30 86 N
CT 100 86 Z2IS CT 40 86 N
CT 120 86 Z2IS CT 45 86 N
24.02 CT 50 86 N
T: 36 / 48 / 58 / 68 cm CT 60 86 N
82,75

CT 30 86 SZ2
13,0 CT 40 86 SZ2
26,25
CT 45 86 SZ2
CT 50 86 SZ2
CT 60 86 SZ2 24.03 T: 58 / 68 cm
39,75
CT 80 86 SZ2 CTSS 120 86 T2
CT 90 86 SZ2 CTSS 160 86 T2
CT 100 86 SZ2 CTSS 180 86 T2
CT 120 86 SZ2

82,75

1/2022 24.
 CONTINO
Floor units, carcase height 86.25 cm
T: Cupboard depth cm

CARCASE LINE 86
20.
Sink units Waste bin units Carcase height 17 cm

24.09 T: 58 / 68 cm 24.12 T: 58 / 68 cm 24.13 T: 58 / 68 cm 20.15 T: 36 / 48 / 58 / 68 cm

CTSP 45 86 CTSPA 90 86 TZ CT 30 86 ZISWH CT 30 17 S
CTSP 50 86 CTSPQ 100 86 TZ CT 40 86 ZISWH CT 40 17 S
CTSP 60 86 13,0 CT 45 17 S
CT 50 17 S
82,75

CT 60 17 S
82,75

82,75
CT 80 17 S
CT 90 17 S
CT 100 17 S
24.09 T: 58 / 68 cm 24.12 T: 58 / 68 cm 24.13 T: 58 / 68 cm CT 120 17 S
CTSP 80 86 CTSPA 80 86 TZW CT 45 86 ZISWH
CTSP 90 86 CTSPQ 90 86 TZW CT 50 86 ZISWH
CTSP 100 86
CTSP 120 86
82,75

82,75
82,75 Carcase height 43 cm

24.09 T: 58 / 68 cm 24.12 T: 58 / 68 cm 24.13 T: 58 / 68 cm 20.16 T: 36 / 48 / 58 / 68 cm

CTSP 45 86 ZV CTSPA 90 86 TZW CT 60 86 ZISWH CT 30 43
CTSP 50 86 ZV CTSPQ 100 86 TZW CT 40 43
CTSP 60 86 ZV CT 45 43
CT 50 43
82,75

39,75
CT 60 43
82,75

82,75

24.09 T: 58 / 68 cm 24.12 T: 58 / 68 cm 20.16 T: 36 / 48 / 58 / 68 cm

CTSP 45 86 Z CTSPA 90 86 TZBS CT 80 43
CTSP 50 86 Z CTSPQ 100 86 CT 90 43
CTSP 60 86 Z TZBS CT 100 43
CT 120 43
82,75
82,75

39,75
Shelves

24.09 T: 58 / 68 cm 24.14 T: 36 / 58 cm 20.16 T: 36 / 48 / 58 / 68 cm

CTSP 50 86 ZW TR 30 86 CT 30 43 Z
TR 40 86 CT 40 43 Z
TR 45 86 CT 45 43 Z
Floor units
CONTINO

CT 50 43 Z
86.25 cm

TR 50 86
39,75
TR 60 86 CT 60 43 Z
82,75

Corner sink units TR 90 86 CT 80 43 Z

CT 90 43 Z
CT 100 43 Z
24.09 T: 58 / 68 cm 24.13 T: 58 / 68 cm 24.14 T: 36 / 58 cm CT 120 43 Z
CTSP 60 86 ZW CTEESP 105 86 T3R 30 86
24. CTEESP 110 86 T3R 60 86 20.16 T: 58 / 68 cm
CTEESP 115 86 T3R 90 86 CTSP 60 43 Z
CTEESP 125 86 CTSP 90 43 Z
CTSP 120 43 Z
82,75

82,75

39,75

24.09 T: 58 / 68 cm
CTSP 60 86 ZBS
82,75

24.10 T: 58 / 68 cm
CTSP 50 86 Z2
CTSP 60 86 Z2
39,5

39,75

24.10 T: 58 / 68 cm
CTSP 80 86 Z2
CTSP 90 86 Z2
39,5 CTSP 100 86 Z2
CTSP 120 86 Z2
39,75

24.10 T: 58 / 68 cm
CTSP 50 86 Z2W

39,5

39,75

24.10 T: 58 / 68 cm
CTSP 60 86 Z2W

39,5
39,75

24.11 T: 58 / 68 cm
CTSP 80 86 Z2W
CTSP 90 86 Z2W
39,5 CTSP 100 86 Z2W
CTSP 120 86 Z2W
39,75

24.12 T: 58 / 68 cm
CTQ 60 86

82,75

24. 1/2022
 Price group
Floor units
Carcase height 86.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Floor unit Carcase depth 56 cm
1 door CT1586 L/R 15 257 274 298 341 369 393 435 477
2 adjustable shelves CT2086 L/R 20 257 274 298 341 369 393 435 477
CT3086 L/R 30 257 274 298 341 369 393 435 477
82,75

CT4086 L/R 40 267 285 310 362 389 417 468 508
CT4586 L/R 45 274 294 312 367 399 431 485 528
Diagram shows L CT5086 L/R 50 276 303 316 371 408 448 500 547
CT6086 L/R 60 292 312 337 396 442 488 541 588

Floor unit Carcase depth 56 cm

2 doors CT8086 80 381 407 462 542 610 676 757 826
2 adjustable shelves CT9086 90 397 429 476 565 636 707 785 856
CT10086 100 406 434 488 582 656 729 810 883
120 cm unit with centre post. CT12086 120 432 461 512 624 727 782 863 940
82,75

Floor unit Carcase depth 56 cm

1 door CT3086IS2IZ L/R 30 524 541 561 608 633 659 702 765
2 inner drawers CT4086IS2IZ L/R 40 541 555 581 631 659 686 737 803
1 inner pullout CT4586IS2IZ L/R 45 550 568 588 642 675 707 760 828
82,75

CT5086IS2IZ L/R 50 559 583 598 652 692 730 783 854
CT6086IS2IZ L/R 60 575 598 625 681 728 776 826 902
Diagram shows L
Exchange wide angle hinge ANIGE 0
through standard hinge, with spacer strip

Floor unit Carcase depth 56 cm

2 doors CT8086IS2IZ 80 741 769 824 903 971 1037 1117 1217
2 inner drawers CT9086IS2IZ 90 777 805 853 944 1014 1085 1161 1267
1 inner pullout CT10086IS2IZ 100 795 824 876 971 1044 1117 1199 1308

82,75 Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Pullout unit Carcase depth 56 cm

1 pullout CT3086ZIZ 30 541 565 583 633 679 723 798 870
1 inner pullout CT4086ZIZ 40 552 575 592 655 708 762 846 922
CT4586ZIZ 45 556 580 598 659 718 778 864 943
CT5086ZIZ 50 562 590 605 668 731 795 888 968
82,75
CT6086ZIZ 60 573 603 620 686 757 829 932 1015

Inner pullout exchange ANISIZ 0

instead of 1 inner pullout
1 inner drawer will be supplied.

Pullout unit Carcase depth 56 cm

1 pullout CT3086ZIS2 30 626 651 668 720 763 808 885 966
2 inner drawers CT4086ZIS2 40 639 661 679 740 794 847 932 1015
CT4586ZIS2 45 644 667 685 746 805 863 953 1039
CT5086ZIS2 50 652 679 695 757 822 885 975 1062
82,75
CT6086ZIS2 60 665 694 711 779 848 919 1024 1116

Pullout unit Carcase depth 56 cm

2 pullouts CT3086Z2 30 552 577 595 646 693 736 814 888
39,5 CT4086Z2 40 562 586 604 667 722 778 862 939
CT4586Z2 45 568 590 610 671 731 792 883 963
CT5086Z2 50 573 602 618 681 746 811 905 986
39,75
CT6086Z2 60 585 616 633 702 776 846 952 1038
CT8086Z2 80 738 784 801 918 1033 1148 1295 1409
CT9086Z2 90 786 825 871 968 1090 1213 1355 1477
C1 CT10086Z2 100 821 846 894 1001 1118 1235 1386 1511
CT12086Z2 120 824 859 926 1032 1149 1267 1406 1533

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 24.01
 Price group
Floor units
Carcase height 86.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Pullout unit Carcase depth 56 cm
1 pullout CT3086Z2IS 30 628 652 660 723 762 800 855 932
39,5 1 inner drawer CT4086Z2IS 40 641 666 675 743 791 837 892 973
1 pullout CT4586Z2IS 45 646 671 685 755 804 850 910 992
CT5086Z2IS 50 648 676 690 777 821 865 932 1015
39,75
CT6086Z2IS 60 665 690 711 796 847 899 965 1051
CT8086Z2IS 80 860 905 925 1007 1102 1197 1464 1595
CT9086Z2IS 90 895 946 973 1056 1161 1270 1537 1676
C1 CT10086Z2IS 100 945 996 1032 1119 1237 1352 1623 1770
CT12086Z2IS 120 979 1037 1076 1168 1298 1426 1697 1848

Pullout unit Carcase depth 56 cm

13,0 1 drawer CT3086SZ2 30 660 683 692 754 793 832 887 963
26,25 2 pullouts CT4086SZ2 40 672 697 706 774 822 868 923 1004
CT4586SZ2 45 677 702 716 786 834 880 941 1023
CT5086SZ2 50 679 707 721 807 851 895 962 1045
39,75
CT6086SZ2 60 695 721 742 827 877 930 996 1082
CT8086SZ2 80 905 949 971 1053 1147 1242 1509 1641
CT9086SZ2 90 941 992 1018 1101 1207 1315 1582 1722
C1 CT10086SZ2 100 993 1044 1079 1166 1284 1400 1672 1818
CT12086SZ2 120 1026 1084 1123 1215 1344 1472 1742 1894

Price group
Function floor units
Carcase height 86.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit Carcase depth 56 cm
1 pullout (depth 50 cm) CT1586ZR 15 504 528 549 602 628 653 702 765
2 metal boards each with
2 divisions

82,75

Towel unit Carcase depth 56 cm

with ventilation holes in the rear wall CT1586ZH 15 520 545 565 619 643 667 717 782
1 pullout (depth 50 cm)
1 extending towel rail
2-rods, chromed
82,75 (installation depth 50 cm)
1 metal board

Towel unit Carcase depth 56 cm

with ventilation holes in the rear wall CT1586H L/R 15 303 317 340 390 414 436 484 525
1 door CT2086H L/R 20 304 318 340 391 415 436 485 526
1 extending towel rail chromed CT3086H L/R 30 305 320 341 392 416 437 486 527
(installation depth 50 cm)
82,75
1 adjustable shelf
Diagram shows L
For 15 cm width with 2 towel rails,
from 20 cm width with 3 towel rails.

Pharmacy floor unit Carcase depth 56 cm

1 large capacity pullout with front panel CT2086GVZ 20 536 552 576 619 647 671 713 755
guided on 1 pullout and CT3086GVZ 30 536 552 576 619 647 671 713 755
1 drawer
1 inner drawer
82,75

Storage unit Carcase depth 56 cm

1 pullout (depth 50 cm) CT3086ZRK L/R 30 513 527 550 591 618 641 681 722
3 wire baskets
1 drop-in tray

82,75
Max. load capacity 16 kg per pullout.
Diagram shows L

Bread cupboard Carcase depth 56 cm

1 pullout CT3086ZBR 30 671 703 725 785 814 842 883 963
1 frame with bread bag
for long french loaves
1 bottle arrangement
82,75

24.02 1/2022
 Price group
Function floor units
Carcase height 86.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Bottle cupboard Carcase depth 56 cm
1 pullout CT3086ZISF 30 644 666 669 723 748 771 801 874
1 inner drawer
1 removable wire basket
holding 8 bottles
82,75

Storage unit Carcase depth 56 cm

1 pullout CT3086ZIS3K 30 793 821 832 904 939 974 1028 1119
3 inner drawers
2 removable baskets

82,75

Niche door CT3086N L/R 30 261 267 302 333 365 392 440 481
1 door with attached plinth CT4086N L/R 40 264 274 309 346 378 409 460 501
1 recessed handle below the worktop CT4586N L/R 45 264 281 311 351 385 418 469 509
no rear panel CT5086N L/R 50 265 287 320 358 393 432 481 522
82,75

no floor CT6086N L/R 60 271 296 331 369 414 455 515 562

Diagram shows L Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.

Floor unit with sliding doors Carcase depth 56 cm

consisting of: CTSS12086T2 120 1634 1656 1695 1774 1832 1889 1960 2137
2 sliding doors on one front level CTSS16086T2 160 1770 1798 1842 1935 2002 2069 2152 2346
100% opening width CTSS18086T2 180 1874 1907 1958 2064 2139 2218 2312 2519
1 carcase, left in half the planning width
Cupboard width 120, 160, 180 cm:
82,75 1 carcase, right in half the planning width
Not available in IOS-C, IOS-M-C
2 adjustable shelves per carcase
1 fitting-set for on-site installation

Inner drawers and inner pullouts are possible.

Sliding doors in closed position on one level.
The cupboard is supplied in separate modules.
Width alterations not possible!
VB and AN TU 85 not possible.

1/2022 24.03
 Price group
Corner floor units
Carcase height 86.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Corner floor unit Carcase depth 56 cm
Planning depth 65 resp. 75 cm Door width 40 cm
Actual space 105 (102 up to 118 cm) CTEE10586 L/R 100 518 560 616 724 810 894 979 1067
Door width 45 cm
Actual space 110 (107 up to 123 cm) CTEE11086 L/R 100 518 560 616 724 810 894 979 1067
82,75

Door width 50 cm
Actual space 115 (112 up to 128 cm) CTEE11586 L/R 100 518 560 616 724 810 894 979 1067
Diagram shows L
Door width 60 cm
Actual space Actual space 125 (122 up to 138 cm) CTEE12586 L/R 100 596 638 694 802 888 972 1057 1145
1 door
1.7
2 adjustable shelves
Pl.depth

56/66
100 1 inner blender with angle blender CTPEEW786 7 0 0 0 0 0 0 0 0
7.3 adjustable from 4 to 10 cm
Door width Extra charge per 5 cm additional CMPTP5 5 6 8 8 8 11 14 14 16
width (up to max. 20 cm)

Corner floor unit Carcase depth 56 cm

Planning depth 65 resp. 75 cm Door width 45 cm
Actual space 110 (107 up to 123 cm) CTEE11086LM L/R 100 1130 1178 1230 1344 1433 1519 1602 1746
Door width 50 cm
Actual space 115 (112 up to 128 cm) CTEE11586LM L/R 100 1130 1178 1230 1344 1433 1519 1602 1746
82,75

Door width 60 cm
Actual space 125 (122 up to 138 cm) CTEE12586LM L/R 100 1238 1286 1338 1452 1541 1627 1710 1854
Diagram shows L
1 door
Actual space 2 height adjustable swing-out shelves
with chromium plated railing
1.7
2 rotating shelf cushionings
Pl.depth

56/66
100 for installation on site
7.3 1 inner blender with angle blender CTPEEW786 7 0 0 0 0 0 0 0 0
Door width adjustable from 4 to 10 cm
Extra charge per 5 cm additional CMPTP5 5 6 8 8 8 11 14 14 16
width (up to max. 20 cm)

Carousel floor unit Carcase depth 56 cm

Floor dimensions 81.7 x 81.7 cm CTE8286K 80 947 981 1000 1136 1199 1260 1326 1447
1 swivel door, self adhesive
1 carousel 360° revolving
82,75

2 rotating shelves with metal railing,

chromium plated plus dividers,
80
upper shelf height adjustable
56,6
Special handle solution see page 10.10.
On request supplied unassembled.
Not possible with worktops less than 3 cm thickness.
80
56,6

Carousel floor unit Carcase depth 56 cm

Floor dimensions 91.7 x 91.7 cm CTE9286K 90 1043 1088 1114 1265 1336 1405 1489 1622
1 swivel door, self adhesive
1 carousel 360° revolving
82,75

2 rotating shelves with metal railing,

chromium plated plus dividers,
upper shelf height adjustable
90
66,6
Special handle solution see page 10.10.
On request supplied unassembled.
90

Not possible with worktops less than 3 cm thickness.

66,6

Additional carousel shelf TE80KB 100

1 rotating shelf with metal railing, TE90KB 113
chromium plated including dividers
for extending to a third level

Please note: when placing an order, it is imperative to specify the actual floor measurement, the angle blender CTPEEW 7 .. is adapted at factory.
The legs of the angle blender are free to choose from 4 - 10 cm width. For more than 10 cm please note extra charge MP TP 5.

24.04 1/2022
 Price group
Built-under oven/microwave housing units
Carcase height 86.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

3,5 Built-under oven/microwave housing unit Carcase depth 56 cm
1 blender CTH6086Z 60 498 519 540 578 619 658 696 757
1 niche max. CTH6186Z 61 511 535 554 595 636 676 716 781
width: 56.5 / 57.7 / 72.5 / 86.5 cm CTH7686Z 76 520 545 568 609 653 697 736 801
41,0
height: 38-52 cm CTH9086Z 90 651 680 710 771 831 861 938 1024
26,25
1 pullout
Cupboard width 60, 61, 76, 90 cm:
Not available in IOS-C, IOS-M-C
Front with chamfered edge at the bottom for opening.
Plan optional opening support HFO3.

3,5 Built-under oven housing unit Carcase depth 56 cm

1 blender CTH6086S 60 413 430 447 485 508 535 564 615
1 niche max. 56.5 x 60 cm
Not available in IOS-C, IOS-M-C
1 drawer
19,25
Front with chamfered edge at the bottom for opening.
Plan optional opening support HFO3.
Plinth steps not possible.

3,5 Built-under oven housing unit Carcase depth 56 cm

1 blender CTH6086B 60 237 248 269 300 362 422 459 510
1 niche max. CTH7686B 76 303 327 357 410 453 497 551 614
width: 56.5 / 72.5 / 88 cm CTH9186B 91 449 479 525 596 657 711 773 861
5,25 height: 73.4 cm

When installed near a corner situation allowances must be made for drawers and pullouts in the adjacent corner to avoid fouling cooker knobs and handles
increase corner blender width.

Programme TOCCO-C one-sided with thick edge at widths of 61, 76 and 91 cm.

Price group
Hob units
Carcase height 86.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Hob unit Carcase depth 56 cm
1 protective screen CTK6086Z2 60 655 687 703 771 844 915 1022 1116
39,5 2 pullouts CTK8086Z2 80 808 853 872 987 1103 1217 1364 1486
CTK9086Z2 90 856 895 941 1041 1161 1282 1428 1554
39,75

Control panel on top. CTK10086Z2 100 890 917 964 1072 1188 1307 1455 1586
CTK12086Z2 120 893 927 999 1101 1219 1337 1477 1611
C1

Hob unit Carcase depth 56 cm

13,0 1 protective screen CTK6086SZ2 60 764 791 813 896 947 999 1065 1158
26,25 1 drawer CTK8086SZ2 80 973 1018 1041 1122 1216 1311 1578 1717
2 pullouts CTK9086SZ2 90 1011 1062 1089 1174 1278 1385 1656 1800
39,75

CTK10086SZ2 100 1062 1116 1149 1238 1355 1471 1740 1892
Control panel on top. CTK12086SZ2 120 1095 1154 1194 1284 1415 1542 1813 1973
C1

Planning tips
Floor units with drawers will be given a cable protection on request, for use with hobs with sensor control above.
Please plan in addition the cable protection e.g. AN MU.

Recessed handle cut-out ANTKGAUS 44

for ventilation of induction hobs
Air gap 0.5 cm underneath worktop
max. length of the recessed handle 310 cm

Cupboard with drawer above, ANMU 57

prepared for hob
Protective cable shelf, removable

Necessary to state appliance.

1/2022 24.05
 Price group
Hob units
Carcase height 86.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Cut-out floor unit side ANMU2S 43
cutout 50 x 4.2 cm at the
side upper edge

For hobs across several cupboards.

Blender instead of drawer ANBLS 0

Blender factory drilled ANBLBO 53 53 53 53 53 53 53 53

Blender has holes for control knobs
Not available in IOS-C, IOS-M-C
Please state hob type, accessories for hob,
worktop and worktop thickness.

Blender factory drilled ANBLBO1 53 53 53 53 53 53 53 53

7 drill holes (5x operating knob, 2x socket)
Not available in IOS-C, IOS-M-C
50 mm diameter.
Placed on the blender in height and width.
Suitable for Bora Professional.

Specify deviations in drill hole diameter and

placement in the order!

Blender factory drilled ANBLBO2 53 53 53 53 53 53 53 53

5 drill holes for operating knobs 50 mm diameter.
Not available in IOS-C, IOS-M-C
Placed on the blender in height and width.
Suitable for Bora Professional.

Specify deviations in drill hole diameter and

placement in the order!

Blender factory drilled ANBLBO3 53 53 53 53 53 53 53 53

2 drill holes 50 mm diameter for Bora sockets.
Not available in IOS-C, IOS-M-C
Placement on the blender 100 mm each from
the outside.

Specify deviations in drill hole diameter and

placement in the order!

Blender factory drilled ANBLBOGL - - - - - 211 - -

Blender has holes for control knobs
Available in IOS-C, IOS-M-C
Please state hob type, accessories for hob,
worktop and worktop thickness.

Blender factory drilled ANBLBOGL1 - - - - - 211 - -

7 drill holes (5x operating knob, 2x socket)
Available in IOS-C, IOS-M-C
50 mm diameter.
Placed on the blender in height and width.
Suitable for Bora Professional.

Specify deviations in drill hole diameter and

placement in the order!

Blender factory drilled ANBLBOGL2 - - - - - 211 - -

5 drill holes for operating knobs 50 mm diameter.
Available in IOS-C, IOS-M-C
Placed on the blender in height and width.
Suitable for Bora Professional.

Specify deviations in drill hole diameter and

placement in the order!

Blender factory drilled ANBLBOGL3 - - - - - 211 - -

2 drill holes 50 mm diameter for Bora sockets.
Available in IOS-C, IOS-M-C
Placement on the blender 100 mm each from
the outside.

Specify deviations in drill hole diameter and

placement in the order!

24.06 1/2022
 Price group
Hob units
Carcase height 86.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Floor unit prepared for under-floor ANTILGER 145
extractor
The cupboard is prepared with the necessary
appliance clearance below the hob.
Rear wall construction is prepared for the
respective appliance requirements.
The lower pullout is shortened, depending on
the choice of appliance.

Essential to state appliance and planning-relevant

accessories required, e.g. recirculating air, extraction,
air circulation unit, sound absorber etc.

Floor unit prepared for table Carcase depth 56 cm

ventilator CT8086Z2TV 80 803 848 866 982 1098 1213 1359 1474
39,5 2 pullouts CT9086Z2TV 90 851 890 936 1033 1155 1278 1420 1541
Back wall can be removed from the CT10086Z2TV 100 885 910 960 1065 1183 1300 1451 1575
39,75 cupboard interior. CT12086Z2TV 120 889 922 992 1097 1214 1330 1470 1598

Pullout depth 40 cm for cupboard depth 58 cm.

10 Pullout depth 50 cm for cupboard depth 68 cm.

Floor unit prepared for table Carcase depth 56 cm

13,0 ventilator CT8086BZ2TV 80 957 1002 1026 1104 1200 1295 1562 1700
26,25 1 blender CT9086BZ2TV 90 995 1044 1073 1157 1263 1367 1639 1784
2 pullouts CT10086BZ2TV 100 1044 1098 1132 1221 1338 1455 1725 1877
39,75 Back wall can be removed from the CT12086BZ2TV 120 1079 1137 1178 1268 1398 1525 1796 1956
cupboard interior.
C1
10 Pullout depth 40 cm for cupboard depth 58 cm.
Pullout depth 50 cm for cupboard depth 68 cm.

The cupboard is prepared with the necessary space for the appliance underneath the hob.
It is dimensionally tailored to the following appliances:
BORA: BHA, BFIA, PURA, PUXA
MIELE: KMDA - Series
BERBEL: BKF83DLP
ELICA: NIKOLATESLA
NOVY: UP, UPSIDE, ONE
AEG: COMBOHOB - 2 in 1 hob-extractor-combination
By pulling forward the back wall, there is no need for leaving space for an exhaust air duct.
Please note worktop depth of at least 60 cm.
Minimum plinth height 10 cm!

1/2022 24.07
 Price group
Fronts for built-under appliances
Carcase height 86.25 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Original front for dishwashers
with standard recessed handle above CGFV4586M 45 115 133 166 195 235 267 321 351
For fully integrated dishwasher, CGFV6086M 60 126 143 183 223 264 308 352 382
height 82 - 87 cm.

82,75

Original front with for dishwashers

pullout partitioning CGFV608661GZ2 60 297 313 352 390 433 477 520 568
with standard recessed handle above
For fully integrated dishwasher,
height from 84.5 up to 87 cm.
39,5

Minimum plinth height 7 cm!

Please state appliance model on order!
39,75 Appliance plinth base not necessary.
Please note front weight, if necessary exchange spring sets.

Original front with for dishwashers

drawer- and pullout partitioning CGFV608661GSZ2 60 337 363 404 451 501 554 648 708
with standard recessed handle above
26,25 13,0

For fully integrated dishwasher,

height from 84.5 up to 87 cm.

Minimum plinth height 7 cm!

Please state appliance model on order!
39,75 Appliance plinth base not necessary.
Please note front weight, if necessary exchange spring sets.

Original front with for dishwashers

pullout partitioning C1GFV6086Z2M 60 225 242 282 323 363 407 451 481
with standard recessed handle above
39,5
For fully integrated dishwasher,
height 82 - 87 cm.

43,0

Original front with for dishwashers

13,0 drawer- and pullout partitioning C1GFV6086SZ2M 60 325 341 382 422 462 507 550 581
with standard recessed handle above
26,25
For fully integrated dishwasher,
height 82 - 87 cm.

43,0

Original front CGFV4586G 45 159 192 241 299 363 428 528 574
with standard recessed handle above CGFV6086G 60 174 208 261 329 420 507 580 632
2 parts hinged front panel
for fully integrated dishwasher,
height 82 - 87 cm.

82,75

Appliance plinth base GSU45 45 33

GSU60 60 36
Variable height between 4 and 14 cm.
For dishwashers.
Plinth base adapted on site.

Permitted appliances for plinth heights smaller than 10 cm:

AEG: all fully integrated models with drag door technology
B/S/H: all large capacity models with integrated Vario hinge
Miele: all fully integrated models
Further models of other manufacturers are possible after checking the appliance type
If necessary exchange spring sets.

Appliance plinth base not necessary.

24.08 1/2022
 Price group
Sink units
Carcase height 86.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Sink unit Carcase depth 56 cm
no rear panel CTSP4586 L/R 45 267 287 307 351 387 424 479 520
1 door CTSP5086 L/R 50 271 295 310 367 404 440 496 542
1 metal water drip floor CTSP6086 L/R 60 285 307 332 391 435 480 535 582
82,75

Diagram shows L

Sink unit Carcase depth 56 cm

no rear panel CTSP8086 80 375 400 451 534 601 668 749 815
2 doors CTSP9086 90 388 417 468 554 626 697 778 846
1 metal water drip floor CTSP10086 100 396 428 477 572 646 722 797 869
CTSP12086 120 418 455 504 610 711 771 842 918
82,75 120 cm unit with centre post.

Sink unit Carcase depth 56 cm

no rear panel CTSP4586ZV 45 283 305 321 369 405 440 499 546
1 front loose CTSP5086ZV 50 288 310 324 379 420 457 511 557
no hinges and built-in refuse bin CTSP6086ZV 60 304 322 349 406 452 499 552 601
82,75

1 metal water drip floor

Recycling containers for fitting on site.

Sink pullout unit Carcase depth 56 cm

no rear panel CTSP4586Z 45 469 489 505 552 614 673 713 779
1 pullout (depth 45 cm) CTSP5086Z 50 481 501 515 571 630 689 735 800
1 metal water drip floor CTSP6086Z 60 503 524 552 604 675 746 779 847
82,75

Recycling containers for fitting on site.

Sink waste bin unit Carcase depth 56 cm

no rear panel CTSP5086ZW 50 629 647 665 722 770 818 865 944
1 pullout (depth 50 cm)
no back section
82,75

1 odour trap
1 frame with 3 waste bins, Container change
contents 1x 14 ltr., 1x 10 ltr. and ANTSP20L 0
20 1x 10 ltr. with bio lid
2,5 2,5
in addition 2x 2.5 ltr.
10 1 metal water drip floor
14
10
Available height 41 cm to carcase top edge!

Sink waste bin unit Carcase depth 56 cm

no rear panel CTSP6086ZW 60 648 673 700 754 816 878 909 991
1 pullout (depth 50 cm)
no back section
82,75

1 odour trap
1 frame with 3 waste bins, Container change
contents 1x 20 ltr., 1x 10 ltr. and ANTSP20L 0
20 1x 10 ltr. with bio lid
2,5 2,5
in addition 2x 2.5 ltr.
10 1 metal water drip floor
20
10
Available height 41 cm to carcase top edge!

Sink waste bin unit Carcase depth 56 cm

no rear panel CTSP6086ZBS 60 628 647 673 731 780 825 876 954
1 pullout with BLANCOSELECT-
waste disposal system (depth 40 cm)
82,75

1 extendible system lid

2 waste bins, Container change
contents 1x 30 ltr. and 1x 19 ltr. ANTSP15L 0
1 metal water drip floor ANTSP8L 0

30 19 Available height 47.5 cm to carcase top edge!

A minimum distance of 6.5 cm to the worktop front edge is essential for the cut-out!
Please pay attention to the measurements of the integrated sink.

1/2022 24.09
 Price group
Sink units
Carcase height 86.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Sink pullout unit Carcase depth 56 cm
no rear panel CTSP5086Z2 50 693 740 760 815 879 943 1020 1113
39,5 1 pullout (depth 30 cm) CTSP6086Z2 60 708 755 780 833 906 978 1064 1159
with lowered wooden back piece
1 cut-out cover for pop-up-waste
39,75
for installation on site
14,5-29,5
cut-out width 14.5 up to 29.5 cm
1 pullout (depth 45 cm)
25 1 metal water drip floor C1

Recycling containers for fitting on site.

upper pullout
Usable height of the lower pullout 33 cm.

Sink pullout unit Carcase depth 56 cm

no rear panel CTSP8086Z2 80 932 971 1013 1121 1228 1337 1479 1614
39,5 1 pullout (depth 45 cm) CTSP9086Z2 90 982 1024 1086 1181 1297 1410 1559 1699
with lowered wooden back piece CTSP10086Z2 100 1021 1052 1117 1209 1337 1464 1591 1735
39,75 1 cut-out cover for pop-up-waste CTSP12086Z2 120 1044 1078 1147 1237 1376 1516 1615 1759
for installation on site
14,5-29,5 cut-out width 14.5 up to 29.5 cm
1 pullout (depth 45 cm)
25 1 metal water drip floor C1

Recycling containers for fitting on site.

Usable height of the lower pullout 33 cm.
upper pullout

Sink waste bin unit Carcase depth 56 cm

no rear panel CTSP5086Z2W 50 887 953 978 1025 1083 1142 1203 1311
39,5 1 pullout (depth 30 cm)
with lowered wooden back piece
1 cut-out cover for pop-up-waste
39,75
for installation on site Container change
cut-out width 14.5 up to 29.5 cm ANTSP18L 0
20 1 pullout (depth 50 cm)
2,5 2,5 C1
no back section
8
12
1 odour trap
8 1 frame with 3 waste bins,
contents 1x 12 ltr., 1x 8 ltr. and
14,5-29,5 1x 8 ltr. with bio lid
in addition 2x 2.5 ltr.
25
1 metal water drip floor

upper pullout Available height 47.5 cm to carcase top edge!

Sink waste bin unit Carcase depth 56 cm

no rear panel CTSP6086Z2W 60 903 969 996 1038 1108 1177 1240 1351
39,5 1 pullout (depth 30 cm)
with lowered wooden back piece
39,75

1 cut-out cover for pop-up-waste

for installation on site Container change
cut-out width 14.5 up to 29.5 cm ANTSP18L 0
20 1 pullout (depth 50 cm)
2,5 2,5
no back section C1
8 1 odour trap
18
8 1 frame with 3 waste bins,
contents 1x 18 ltr., 1x 8 ltr. and
14,5-29,5 1x 8 ltr. with bio lid
in addition 2x 2.5 ltr.
25
1 metal water drip floor

upper pullout Available height 47.5 cm to carcase top edge!

A minimum distance of 6.5 cm to the worktop front edge is essential for the cut-out!
Please pay attention to the measurements of the integrated sink.

24.10 1/2022
 Price group
Sink units
Carcase height 86.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Sink waste bin unit Carcase depth 56 cm
no rear panel CTSP8086Z2W 80 1162 1197 1263 1365 1465 1563 1706 1859
39,5 1 pullout (depth 45 cm) CTSP9086Z2W 90 1216 1259 1339 1432 1539 1648 1800 1960
with lowered wooden back piece CTSP10086Z2W 100 1258 1296 1374 1451 1590 1728 1833 1999
39,75 1 cut-out cover for pop-up-waste CTSP12086Z2W 120 1297 1334 1397 1474 1635 1798 1854 2020
for installation on site
cut-out width 14.5 up to 29.5 cm
1 pullout (depth 45 cm)
2,5 12 1 odour trap C1
1 frame with 4 waste bins,
8 18
contents 1x 18 ltr., 1x 12 ltr.,
1x 8 ltr. with bio lid and 1x 2.5 ltr.
14,5-29,5
1 metal water drip floor
25
Available height 47.5 cm to carcase top edge!

upper pullout

Sink unit with back wall MPRU 44

1 cover for on-site hose cutout

If a rear panel is required for a sink unit,

please always order this unit with the code MP RU.

Opening support for HFO3 175

sink pullout cupboards
Plinth base prepared for electrical unit
Operation using sensor in the plinth area
Integrated orientation light, can be switched off
110 - 230 volt
Intensity adjustable
Dimensions 16 x 30 x 3.5 cm
Cable length 200 cm, plug-in power supply
internationally adaptable, colour grey
Water protection shelf is deleted

From cupboard width 40 cm.

Door gap enlargement not necessary.

Container change .
1x 20 ltr. container with bio lid ANTSP20L 0
instead of 2x 10 ltr. containers

1x 18 ltr. container with bio lid ANTSP18L 0

instead of 2x 8 ltr. containers

Container change BLANCOSELECT .

3x 15 ltr. containers with 1 bio lid ANTSP15L 0
instead of 1x 30 ltr. and 1x 19 ltr. containers

2x 8 ltr. containers with 1 bio lid ANTSP8L 0

instead of 1x 19 ltr. container

A minimum distance of 6.5 cm to the worktop front edge is essential for the cut-out!
Please pay attention to the measurements of the integrated sink.

1/2022 24.11
 Price group
Sink units for hot water taps
Carcase height 86.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Hot water towel unit Carcase depth 56 cm
no rear panel CTQ6086 L/R 60 390 410 435 494 540 586 639 687
1 door
1 compartment 36.7 cm wide for taps
accessories
82,75 1 middle side removable
1 compartment 18.4 cm wide with towel holder
Diagram shows R
1 solid base, above

The compartment for taps accessories determines

style left or right.

Sink pullout unit for Carcase depth 56 cm

hot water taps Door width 30 cm
no rear panel CTSPA9086TZ L/R 90 650 678 735 824 922 1024 1103 1197
1 door 30 cm or 40 cm wide in front of Door width 40 cm
82,75

compartment for taps accessories CTSPQ10086TZ L/R 100 659 690 748 844 941 1047 1135 1228
1 middle side removable
Diagram shows R
1 pullout 60 cm wide (depth 45 cm)
1 metal water drip floor

Recycling containers for fitting on site.

Sink waste bin unit for Carcase depth 56 cm

hot water taps Door width 30 cm
no rear panel CTSPA8086TZW L/R 80 777 801 848 941 1017 1097 1190 1294
1 door 30 cm or 40 cm wide in front of Door width 40 cm
82,75

compartment for taps accessories CTSPQ9086TZW L/R 90 785 814 860 962 1036 1120 1223 1325
1 middle side removable
Diagram shows R 1 pullout 50 cm wide (depth 50 cm)
1 odour trap
1 frame with 3 waste bins, Container change
26,7 contents 1x 14 ltr., 1x 10 ltr. and ANTSP20L 0
36,7 1x 10 ltr. with bio lid
2,5 2,5 in addition 2x 2.5 ltr.
10 1 metal water drip floor
14
10
Available height 41 cm to carcase top edge!

Sink waste bin unit for Carcase depth 56 cm

hot water taps Door width 30 cm
no rear panel CTSPA9086TZW L/R 90 796 827 883 974 1063 1156 1234 1341
1 door 30 cm or 40 cm wide in front of Door width 40 cm
82,75

compartment for taps accessories CTSPQ10086TZW L/R 100 805 840 895 994 1083 1179 1267 1372
1 middle side removable
Diagram shows R
1 pullout 60 cm wide (depth 50 cm)
1 odour trap
1 frame with 3 waste bins, Container change
26,7 contents 1x 20 ltr., 1x 10 ltr. and ANTSP20L 0
36,7 1x 10 ltr. with bio lid
2,5 2,5 in addition 2x 2.5 ltr.
10 1 metal water drip floor
20
10
Available height 41 cm to carcase top edge!

Sink waste bin unit for Carcase depth 56 cm

hot water taps Door width 30 cm
no rear panel CTSPA9086TZBS L/R 90 776 801 857 951 1027 1104 1200 1304
1 door 30 cm or 40 cm wide in front of Door width 40 cm
82,75

compartment for taps accessories CTSPQ10086TZBS L/R 100 784 814 870 972 1045 1128 1233 1336
1 middle side removable
Diagram shows R
1 pullout with BLANCOSELECT-
waste disposal system (depth 40 cm)
1 extendible system lid Container change
26,7 2 waste bins, ANTSP15L 0
36,7 contents 1x 30 ltr. and 1x 19 ltr. ANTSP8L 0
1 metal water drip floor

30 19 Available height 47.5 cm to carcase top edge!

The compartment for taps accessories determines style left or right.

The true width for the installation of boilers and cartridges is 26.7 cm or 36.7 cm.
Please plan sink installation above pullout, available height to carcase top edge see respective cupboard!

24.12 1/2022
 Price group
Corner sink units
Carcase height 86.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Corner sink unit Carcase depth 56 cm
Planning depth 65 resp. 75 cm Door width 40 cm
Actual space 105 (102 up to 118 cm) CTEESP10586 L/R 100 492 520 582 678 766 856 930 1014
Door width 45 cm
Actual space 110 (107 up to 123 cm) CTEESP11086 L/R 100 492 520 582 678 766 856 930 1014
82,75

Door width 50 cm
Actual space 115 (112 up to 128 cm) CTEESP11586 L/R 100 492 520 582 678 766 856 930 1014
Diagram shows L
Door width 60 cm
Actual space Actual space 125 (122 up to 138 cm) CTEESP12586 L/R 100 570 598 660 756 844 934 1008 1092
no rear panel
1.7
1 door
Pl.depth

56/66
100 1 metal water drip floor
7.3 1 inner blender with angle blender CTPEEW786 7 0 0 0 0 0 0 0 0
Door width adjustable from 4 to 10 cm
Extra charge per 5 cm additional CMPTP5 5 6 8 8 8 11 14 14 16
width (up to max. 20 cm)

Please note: when placing an order, it is imperative to specify the actual floor measurement, the angle blender CTPEEW 7 .. is adapted at factory.
The legs of the angle blender are free to choose from 4 - 10 cm width. For more than 10 cm please note extra charge MP TP 5.

Price group
Waste disposal floor units
Carcase height 86.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Waste bin floor unit Carcase depth 56 cm
1 pullout (depth 50 cm) CT3086ZISWH 30 659 675 676 755 811 865 902 982
1 inner drawer CT4086ZISWH 40 675 695 697 772 841 908 952 1038
1 odour trap
1 frame with 1 waste bin,
82,75
contents 1x 32 ltr.

32

Waste bin floor unit Carcase depth 56 cm

1 pullout (depth 50 cm) CT4586ZISWH 45 683 704 707 782 855 926 976 1064
1 inner drawer CT5086ZISWH 50 693 713 717 791 871 951 1003 1093
1 odour trap
1 frame with 2 waste bins,
82,75
contents 2x 32 ltr.

32

32

Waste bin floor unit Carcase depth 56 cm

1 pullout (depth 50 cm) CT6086ZISWH 60 744 767 772 844 932 1017 1074 1172
1 inner drawer
1 odour trap
82,75

1 frame with 4 waste bins,

contents 2x 32 ltr., 1x 10 ltr. and
1x 10 ltr. with bio lid

32 10

32 10

1/2022 24.13
 Surface style
Floor shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 86.25 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Floor shelf unit Shelf unit depth 36.2 cm
2 adjustable shelves TR308636 10-30 341 355 467 580 - 646 739 606
TR408636 30-40 359 373 505 630 - 701 802 660
Widths in mm grid variably available. TR458636 40-45 367 381 525 654 - 728 834 687
Please state desired width. TR508636 45-50 375 390 543 679 - 756 866 712
TR608636 50-60 392 407 582 728 - 810 929 764
TR908636 60-90 443 459 698 876 - 974 1119 921

Shelf unit depth 58.2 cm

TR3086 10-30 356 370 490 608 - 677 774 656
TR4086 30-40 376 390 526 654 - 727 835 711
TR4586 40-45 384 400 544 677 - 754 865 738
TR5086 45-50 394 410 563 700 - 779 893 764
TR6086 50-60 414 430 599 746 - 831 953 816
TR9086 60-90 472 488 710 886 - 986 1131 976

Depth extensions 68.2 cm ANUT68 26 27 30 36 38 40 46 44

for floor shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.

Surface style
Floor shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 86.25 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Floor shelf unit, Shelf unit depth 36.2 cm
thick 2.8 cm T3R308636 10-30 448 463 586 710 747 784 886 754
Back panel with circumferential shadow joint T3R608636 30-60 515 532 731 895 943 989 1123 949
2 shelves T3R908636 60-90 579 596 872 1075 1132 1188 1354 1138

Shelf unit interior colour = shelf unit exterior colour. Shelf unit depth 58.2 cm
Widths in mm grid variably available. T3R3086 10-30 468 483 617 746 785 823 932 812
Please state desired width. T3R6086 30-60 545 564 759 926 974 1023 1164 1021
Available without extra charge for free standing T3R9086 60-90 619 639 897 1098 1158 1217 1389 1224
planning, optional without back panel with visible
edges at the rear. Please state on order.

Depth extensions 68.2 cm ANUT68 26 27 30 36 38 40 46 44

for floor shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.
Neutral

FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 86.25 cm
Side depth 34 cm FS8634 L/R 34 0 0 67 94 131 165 85
Side depth 46 cm FS8646 L/R 46 0 0 110 159 224 279 146
Side depth 56 cm FS8656 L/R 56 0 0 110 159 224 279 146
Side depth 61 cm FS8661 L/R 61 0 0 123 179 255 321 170
Side depth 66 cm FS8666 L/R 66 0 0 123 179 255 321 170
Diagram shows R Side depth 76 cm FS8676 L/R 76 0 0 133 194 273 340 179

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“ on page 10.07.

24.14 1/2022
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
for additional planning
for all floor units FSUL L/R 73 73 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 86.25 cm
Side depth up to 34 cm FSUEL8634 L/R 34 66 66 133 160 197 231 151
Side depth up to 46 cm FSUEL8646 L/R 46 66 66 176 225 290 345 212
Side depth up to 58 cm FSUEL8658 L/R 58 66 66 176 225 290 345 212
Diagram shows R Side depth up to 63 cm FSUEL8663 L/R 63 66 66 189 245 321 387 236
Side depth up to 68 cm FSUEL8668 L/R 68 107 107 230 286 362 428 277
Side depth up to 76 cm FSUEL8676 L/R 76 107 107 240 301 380 447 286

Leading edge as carcase exterior side.

Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit end panel Carcase height 86.25 cm
with recessed handle above Depth up to 62.5 cm
Front finish CTW58658 L/R 5 272 281 322 358 385 408 434 463
wall-bound solution (one-sided)
Width 5 cm Depth up to 70.0 cm
82,75 CTW58668 L/R 5 283 300 387 440 467 497 523 561
Please state the relevant L/R.
Diagram shows L The end panel width is always 5 cm.

Floor unit end panel Carcase height 86.25 cm

with recessed handle above CTWI586 5 377 388 454 535 568 596 627 670
Front finish
island-solution (two-sided)
depth max. 120 cm
82,75 Width 5 cm

Please state the required depth, max. 120 cm is possible.

The end panel width is always 5 cm.

Floor unit end panel Carcase height 86.25 cm

with recessed handle above Depth up to 62.5 cm
Front finish CTW58658Z2 L/R 5 352 362 402 437 463 489 515 548
39,5 wall-bound solution (one-sided)
Width 5 cm Depth up to 70.0 cm
39,75 Divided in height 39.75 cm CTW58668Z2 L/R 5 365 378 465 520 547 577 603 646
with recessed handle
Diagram shows L
Please state the relevant L/R.
The end panel width is always 5 cm.

Floor unit end panel Carcase height 86.25 cm

with recessed handle above CTWI586Z2 5 457 466 534 615 647 675 705 756
Front finish
39,5 island-solution (two-sided)
depth max. 120 cm
39,75 Width 5 cm
Divided in height 39.75 cm
with recessed handle

Please state the required depth, max. 120 cm is possible.

The end panel width is always 5 cm.

1/2022 24.15
 Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit end panel Carcase height 86.25 cm
with recessed handle above Depth up to 62.5 cm
Front finish C1TW58658Z2 L/R 5 352 362 402 437 463 489 515 548
39,5 wall-bound solution (one-sided)
Width 5 cm Depth up to 70.0 cm
43,0 Divided in height 43.0 cm C1TW58668Z2 L/R 5 365 378 465 520 547 577 603 646

Diagram shows L Please state the relevant L/R.

The end panel width is always 5 cm.

Floor unit end panel Carcase height 86.25 cm

with recessed handle above C1TWI586Z2 5 457 466 534 615 647 675 705 756
Front finish
39,5 island-solution (two-sided)
depth max. 120 cm
43,0 Width 5 cm
Divided in height 43.0 cm

Please state the required depth, max. 120 cm is possible.

The end panel width is always 5 cm.

Side panel extension ANW5VERL 43 44 52 60 63 65 69 74

Side panel extended by plinth height
Interior visible side colour lacquered,
please state colour FS.

Connection to dishwasher ANW5GSM 46

Interior visible side colour lacquered,
please state colour FS.
Side plinth attached,
state plinth colour.

0,25 Door joint connection at the rear ANW5ANS 25

The side panel has the original edge style and
door joint on the reverse side.

For connection of the floor unit end panel to

cupboards or to a second floor unit end panel,
e.g. to deep isles.

Floor unit panel Basic type

with side shelf unit area Carcase height 86.25 cm
1 recessed handle below the worktop Depth up to 62.5 cm
front and side CTW158658R L/R 15 659 685 730 821 896 973 1055 1149
1 fixed front at the front
82,75 with side frame in front colour Depth up to 70.0 cm
1 shelf CTW158668R L/R 15 686 711 759 854 934 1013 1098 1196
Diagram shows R
Always state interior style,
possible colours see chapter 11! Extra charge interior
MPK/KH/KG 0
Without plinth! MPFF/PF/VM 101
The plinth end finishes at the last cupboard. MPFS/ME 147
MPFG 231
MPH 207
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
VALAIS-C

Floor unit-island side panel Basic type

with side shelf unit area Carcase height 86.25 cm
1 recessed handle below the worktop CTWI1586R 15 767 799 851 955 1045 1134 1228 1340
front, rear and side
1 fixed front at the front and rear Extra charge interior
with side frames in front colour MPK/KH/KG 0
82,75
1 shelf MPFF/PF/VM 196
Always state interior style, MPFS/ME 286
possible colours see chapter 11! MPFG 450
MPH 377
Please state the required depth, max. 120 cm is possible.
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
Without plinth!
VALAIS-C
The plinth end finishes at the last cupboard.

24.16 1/2022
 Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit panel Basic type
with side shelf unit area in two parts Carcase height 86.25 cm
1 recessed handle below the worktop Depth up to 62.5 cm
39,5
front and side CTW158658R2 L/R 15 892 925 986 1108 1213 1314 1426 1554
1 fixed front at the front
39,75 with side frame in front colour Depth up to 70.0 cm
1 recessed handle at the front and side, CTW158668R2 L/R 15 926 964 1027 1153 1260 1368 1483 1617
Diagram shows R
39.75 cm high
1 fixed front at the front Extra charge interior
with side frame in front colour MPK/KH/KG 0
Always state interior style, MPFF/PF/VM 101
possible colours see chapter 11! MPFS/ME 147
MPFG 231
Without plinth! MPH 207
The plinth end finishes at the last cupboard.
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
VALAIS-C

Floor unit-island side panel Basic type

with side shelf unit area in two parts Carcase height 86.25 cm
1 recessed handle below the worktop CTWI1586R2 15 1147 1194 1271 1425 1558 1691 1834 2000
39,5 front, rear and side
1 fixed front at the front and rear Extra charge interior
with side frames in front colour MPK/KH/KG 0
39,75
1 recessed handle at the front, rear and side, MPFF/PF/VM 196
39.75 cm high MPFS/ME 286
1 fixed front at the front and rear MPFG 450
with side frames in front colour MPH 377
Always state interior style,
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
possible colours see chapter 11!
VALAIS-C
Please state the required depth, max. 120 cm is possible.
Without plinth!
The plinth end finishes at the last cupboard.

Connection to dishwasher ANW15GSM 46

Interior visible side colour lacquered,
please state colour FS.
Side plinth attached,
state plinth colour.

Price group
45° mitre end panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
45° mitre end panel Carcase height 86.25 cm
with recessed handle above Depth up to 62.5 cm
Front finish CTW58658K45 L/R 5 272 281 322 358 385 408 434 463
wall-bound solution (one-sided)
82,75 on the front with 45° chamfered edge for mitre Depth up to 70.0 cm
transition with floor unit front CTW58668K45 L/R 5 283 300 387 440 467 497 523 561
Diagram shows L Width 5 cm
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C

45° mitre end panel for isles Carcase height 86.25 cm

with recessed handle above CTWI586K45 5 377 388 454 535 568 596 627 670
Front finish
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C
island-solution (two-sided)
82,75
depth max. 120 cm
both sides with 45° chamfered edge for mitre
transition with floor unit fronts
Width 5 cm

Can be ordered in connection with processing type AN 5K45 see page 10.04. Please state L/R.
Please plan side panel depth flush-front, i.e. total depth to carcase edge + 2 mm (with C1 4 mm) + front thickness.

1/2022 24.17
 Price group
45° mitre end panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
45° mitre end panel Carcase height 86.25 cm
with recessed handle above Depth up to 62.5 cm
39,5
Front finish CTW58658K45Z2 L/R 5 352 362 402 437 463 489 515 548
wall-bound solution (one-sided)
39,75
on the front with 45° chamfered edge for mitre Depth up to 70.0 cm
transition with floor unit front CTW58668K45Z2 L/R 5 365 378 465 520 547 577 603 646
Diagram shows L Width 5 cm
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C
Divided in height 39.75 cm
with recessed handle

45° mitre end panel for isles Carcase height 86.25 cm

39,5
with recessed handle above CTWI586K45Z2 5 457 466 534 615 647 675 705 756
Front finish
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C
island-solution (two-sided)
39,75 depth max. 120 cm
both sides with 45° chamfered edge for mitre
transition with floor unit fronts
Width 5 cm
Divided in height 39.75 cm
with recessed handle

45° mitre end panel Carcase height 86.25 cm

with recessed handle above Depth up to 62.5 cm
39,5
Front finish C1TW58658K45Z2 L/R 5 352 362 402 437 463 489 515 548
wall-bound solution (one-sided)
43,0
on the front with 45° chamfered edge for mitre Depth up to 70.0 cm
transition with floor unit front C1TW58668K45Z2 L/R 5 365 378 465 520 547 577 603 646
Diagram shows L Width 5 cm
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C
Divided in height 43.0 cm

45° mitre end panel for isles Carcase height 86.25 cm

39,5 with recessed handle above C1TWI586K45Z2 5 457 466 534 615 647 675 705 756
Front finish
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, MINERA-C, SOLID-C, TOCCO-C, VALAIS-C
island-solution (two-sided)
43,0
depth max. 120 cm
both sides with 45° chamfered edge for mitre
transition with floor unit fronts
Width 5 cm
Divided in height 43.0 cm

Side panel extension ANW5VERL 43 44 52 60 63 65 69 74

Side panel extended by plinth height
Interior visible side colour lacquered,
please state colour FS.

0,25 Door joint connection at the rear ANW5ANS 25

The side panel has the original edge style and
door joint on the reverse side.

For connection of the floor unit end panel to

cupboards or to a second floor unit end panel,
e.g. to deep isles.

Can be ordered in connection with processing type AN 5K45 see page 10.04. Please state L/R.
Please plan side panel depth flush-front, i.e. total depth to carcase edge + 2 mm (with C1 4 mm) + front thickness.

24.18 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit blender Carcase height 86.25 cm
with recessed handle above CTP2086 L/R 20 69 72 79 85 96 103 105 114
Front finish

82,75
Front finish blenders are manufactured with a maximum
20 cm width.
Diagram shows L

Floor unit blender Carcase height 86.25 cm

with division CTP2086Z2 L/R 20 116 120 126 133 141 149 150 165
39,5
with recessed handle above
Divided in height 39.75 cm
39,75
with recessed handle
Front finish
Diagram shows L

Front finish blenders are manufactured with a maximum

20 cm width.

Floor unit blender Carcase height 86.25 cm

with division C1TP2086Z2 L/R 20 116 120 126 133 141 149 150 165
39,5
with recessed handle above
Divided in height 43.0 cm
43,0
Front finish
Diagram shows L
Front finish blenders are manufactured with a maximum
20 cm width.

Blenders between units ANB1 L/R 36 38 40 43 50 55 60 65

1 additional longitudinal edge in
Not available in BOSSA-C
original style
1 door joint connection strip

Possible from 6.5 cm width.

Extra charge for blender width MPST65 38

less than 6.5 cm
Not available in BOSSA-C
Minimum blender width 2 cm
Diagram shows R 1 longitudinal edge smooth,
not in original style

This style form is not recommended.

Please state L/R!

Floor unit corner blender 90° Carcase height 86.25 cm

with recessed handle above CTPE86 10 125 127 148 168 179 190 201 221
Front finish
freely selectable leg measurement
82,75 from 4 x 4 cm to 10 x 10 cm width
4
Flush with front.
Please state rear length (inside measurement)
from l to r on order.
4

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

Floor unit corner blender 90° Carcase height 86.25 cm

with division CTPE86Z2 10 172 174 194 212 226 238 249 270
39,5 with recessed handle above
Divided in height 39.75 cm
39,75 with recessed handle
Front finish
4
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

4

Please state rear length (inside measurement)

from l to r on order.

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

1/2022 24.19
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Floor unit corner blender 90° Carcase height 86.25 cm
with division C1TPE86Z2 10 172 174 194 212 226 238 249 270
39,5 with recessed handle above
Divided in height 43.0 cm
43,0 Front finish
freely selectable leg measurement
4
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
4

from l to r on order.

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

Floor unit corner blender Carcase height 86.25 cm

with recessed handle above CTPEW86 10 142 145 170 187 196 207 217 237
Front finish
Not available in IOS-C, IOS-M-C
Freely selectable angle up to max. 270°
82,75 (Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3 3 x 3 cm up to 10 x 10 cm width
3

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

Floor unit corner blender Carcase height 86.25 cm

with division CTPEW86Z2 10 189 192 215 236 245 253 263 290
39,5 with recessed handle above
Not available in IOS-C, IOS-M-C
Divided in height 39.75 cm
39,75 with recessed handle
Front finish
3 Freely selectable angle up to max. 270°
(Programme BOSSA-C permitted up to 180°)
3

and freely selectable leg measurement from

3 x 3 cm up to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

Floor unit corner blender Carcase height 86.25 cm

with division C1TPEW86Z2 10 189 192 215 236 245 253 263 290
39,5 with recessed handle above
Not available in IOS-C, IOS-M-C
Divided in height 43.0 cm
43,0 Front finish
Freely selectable angle up to max. 270°
3 (Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3

3 x 3 cm up to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Extra charge CMPTP5 5 6 8 8 8 11 14 14 16

per 5 cm extra width
(from 10 cm to max. 20 cm)

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

24.20 1/2022
 Surface style
Support panels with plinth Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MC H
Support panel with plinth For carcase height 86.25 cm
for blender CTWSP8656 L/R 56 119 119 218 287 312 336 382 294
Thickness 1.6 cm CTWSP8666 L/R 66 129 129 248 327 354 380 431 336
prepared for connection to
floor unit blenders with
recessed handle milling

Diagram shows R Only as accessory type for blenders CTP ..,

not available loose!
For use of dishwasher or open niche.
Visible side points towards dishwasher or to the
open niche. Please state type left/right.

Support panel with plinth up to

Thickness 1.6 cm For carcase height 86.25 cm
both sides finished TWS8658 L/R 63 90 90 190 260 286 312 359 261
TWS8668 L/R 70 105 105 207 286 322 357 410 301
Please state required depth.
Please state whether placed L/R and plinth height.
Fit plinth return on site.
Diagram shows R Plinth height 1.5 cm larger for floor adjustment.

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Floor unit blender Carcase height 86.25 cm
flush with carcase TSB2086 20 39 43 48 63 68 72 85 57

Surface style
Rear panels Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Height KH KG VM ME FG MC H
Rear panel per metre
type of visible side charge per started 10 cm
Texture direction is vertical RW86 86 200 200 319 337 364 387 381
in variable sizes
with loose plinth
Max. length 260 cm (detailed dimension information
can be found in chapter 71).

Rear panels show matching

front colour on visible side only,
back of rear panel to our choice.
Over depth worktop necessary,
no plinth steps possible.

Length connection per top part

tongue and groove joint VL 23
without pop-up fitting

1/2022 24.21
 Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front RWF86 224 247 353 402 447 506 549 592
in variable sizes
Height up to 86.0 cm Not available in IOS-C, IOS-M-C
86,0 Max. width 250 cm (detailed dimension information
can be found on page 71.14).
without recessed handle
with loose plinth

With rear panel, it is essential that worktop is over depth.

Minimum charged 0.5 metres.

Rear panel in RWF3086 30 92 103 128 156 196 240 292 324
front finish RWF4086 40 98 108 131 164 210 260 309 345
in fixed front sizes RWF4586 45 103 112 135 172 217 263 315 359
without recessed handle RWF5086 50 107 114 139 174 230 281 326 368
with loose plinth RWF6086 60 112 125 148 184 243 303 365 406
86,0 For carcase height 86.25 cm old RW .. 86

With rear panel, it is essential that worktop is over depth.

Rear panel in CRWF3086 30 182 193 223 254 285 312 365 396
front finish CRWF4086 40 189 199 238 268 305 337 386 421
with recessed handle above CRWF4586 45 200 208 241 277 311 344 394 431
with loose plinth CRWF5086 50 205 215 250 290 326 366 409 447
For carcase height 86.25 cm CRWF6086 60 220 229 263 305 345 386 448 489
CRWF8086 80 238 243 281 323 371 417 484 528
Please state measurement X, min. 4 cm! CRWF9086 90 250 255 296 341 389 438 509 556
X CRWF10086 100 262 270 310 358 413 463 540 587
With rear panel, it is essential that worktop is over depth. CRWF12086 120 269 301 341 383 453 512 592 646
old CRW .. 86

Rear panel in CRWF3086Z2 30 483 493 522 555 585 613 665 696
C1
front finish CRWF4086Z2 40 489 499 539 569 604 637 685 722
with recessed handle above CRWF4586Z2 45 500 507 542 577 612 644 695 731
Divided in height 39.75 cm CRWF5086Z2 50 504 514 550 588 627 666 710 746
with recessed handle CRWF6086Z2 60 519 529 562 604 645 685 748 790
with loose plinth CRWF8086Z2 80 539 544 582 624 670 717 784 827
For carcase height 86.25 cm CRWF9086Z2 90 550 556 596 642 689 739 810 856
X CRWF10086Z2 100 561 571 611 658 712 763 839 888
Please state measurement X, min. 4 cm! CRWF12086Z2 120 570 600 642 682 753 812 893 947
old CRW .. 86 Z2
With rear panel, it is essential that worktop is over depth.

Price group
Original fronts Neutral

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Front part height 82.75 cm CFT030083 30 103 111 141 177 205 236 281 307
CFT040083 40 108 116 149 187 220 251 303 329
Please state intended purpose. CFT045083 45 108 124 151 191 227 257 310 337
CFT050083 50 109 127 163 196 237 271 322 352
82,75
CFT060083 60 115 135 174 209 253 298 359 390

24.22 1/2022
AVANCE
Floor units, carcase height 79.5 cm

CARCASE LINE 80

Floor units Function cupboards Corner units Housing units Appliance fronts

26.01 26.02 26.03 26.05 26.07

T: 36 / 48 / 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm AGFV 45 80 S
AT 30 80 S AT 15 80 BZR ATEE 105 80 S ATH 60 80 Z 13,0 AGFV 60 80 S
13,0 AT 40 80 S 13,0 ATEE 110 80 S ATH 61 80 Z AGFV 45 80 SM

13,0
AT 45 80 S ATEE 115 80 S ATH 76 80 Z AGFV 60 80 SM
AT 50 80 S ATEE 125 80 S 41,0
ATH 90 80 Z
62,75

AT 60 80 S

62,75
62,75 27,0 62,75

26.01 26.02 26.03 26.05 26.07

T: 36 / 48 / 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm AGFV 60 80 61 S
AT 80 80 SG AT 15 80 BH ATEE 115 80 SD ATH 60 80 S 13,0
13,0 AT 90 80 SG 13,0

13,0
AT 100 80 SG
AT 120 80 SG

62,75
62,75 19,0
62,75 62,75

26.01 26.02 26.03 26.05 26.07

T: 36 / 48 / 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm T: 58 / 68 cm AGFV 60 80 61 SZ2
AT 30 80 SZIZ AT 15 80 BZH ATEE 110 80 SLM ATH 60 80 B 13,0
13,0 AT 40 80 SZIZ 13,0 13,0 ATEE 115 80 SLM ATH 76 80 B
AT 45 80 SZIZ ATEE 125 80 SLM ATH 91 80 B 26,25
AT 50 80 SZIZ
AT 60 80 SZIZ
62,75

5,6
62,75 62,75
AT 80 80 SZIZ 33,0

AT 90 80 SZIZ
AT 100 80 SZIZ
26.02 26.04 26.05 26.08
26.01
T: 58 / 68 cm T: 58 cm T: 58 / 68 cm AGFV 60 80 61 S3Z
T: 36 / 48 / 58 / 68 cm AT 30 80 SH ATE 82 80 K ATH 60 80 SO 13,0
AT 30 80 SZIS2
13,0

13,0
13,0 AT 40 80 SZIS2 13,0
13,0
AT 45 80 SZIS2
AT 50 80 SZIS2
62,75

62,75 19,0
62,75
AT 60 80 SZIS2 33,0

26.02 26.04 26.08

26.01
T: 58 / 68 cm T: 58 cm AGFV 45 80 SG
T: 36 / 48 / 58 / 68 cm AT 30 80 SZRK ATE 92 80 K AGFV 60 80 SG
AT 30 80 SZ2
13,0

13,0
13,0 AT 40 80 SZ2
26,25
AT 45 80 SZ2
AT 50 80 SZ2
62,75

AT 60 80 SZ2 62,75 Hob units

33,0
AT 80 80 SZ2
AT 90 80 SZ2
AT 100 80 SZ2 26.02 26.04 26.05 26.08
T: 58 / 68 cm T: 58 cm T: 58 / 68 cm AGFT 45 80 G
AT 120 80 SZ2 AT 30 80 SZBR ATED 92 80 BK ATK 60 80 BZIZ AGFT 60 80 G
13,0
13,0

26.01 13,0
T: 36 / 48 / 58 / 68 cm
AT 30 80 S3Z
AT 40 80 S3Z
62,75

13,0
62,75

13,0 AT 45 80 S3Z 62,75

13,0
AT 50 80 S3Z
33,0
AT 60 80 S3Z
AT 80 80 S3Z 26.02 T: 58 / 68 cm 26.05 T: 58 / 68 cm
AT 90 80 S3Z AT 30 80 SZISF ATK 60 80 BZ2
AT 100 80 S3Z 13,0 13,0 ATK 80 80 BZ2
AT 120 80 S3Z ATK 90 80 BZ2
26,25
ATK 100 80 BZ2
33,0
ATK 120 80 BZ2
62,75

26.02 T: 58 / 68 cm 26.06 T: 58 / 68 cm
AT 30 80 SZIS2K ATK 60 80 SZ2
13,0 13,0 ATK 80 80 SZ2
26,25
ATK 90 80 SZ2
ATK 100 80 SZ2
33,0
ATK 120 80 SZ2

Floor units
62,75

AVANCE

79.5 cm
26.02 26.07
AT 30 80 N T: 58 / 68 cm
AT 40 80 N AT 80 80 BZ2 TV
AT 45 80 N 13,0 AT 90 80 BZ2 TV
13,0

AT 50 80 N 26,25 AT 100 80 BZ2 TV

AT 60 80 N AT 120 80 BZ2 TV 26.
62,75

33,0

1/2022 26.
 AVANCE
Floor units, carcase height 79.5 cm
T: Cupboard depth cm

Sink units Waste bin units Carcase height 13 cm

26.08 T: 58 / 68 cm 26.11 T: 58 / 68 cm 26.13 T: 58 / 68 cm 26.15 T: 36 / 48 / 58 / 68 cm

ATSP 45 80 B ATSPA 90 80 BTZW AT 30 80 SZWH AT 30 13 S
13,0 ATSP 50 80 B 13,0 ATSPQ 100 80 13,0 AT 40 80 SZWH AT 40 13 S
ATSP 60 80 B BTZW AT 45 13 S
13,0 AT 50 13 S

62,75
AT 60 13 S
62,75

62,75
AT 80 13 S
AT 90 13 S
AT 100 13 S
26.08 T: 58 / 68 cm 26.12 T: 58 / 68 cm 26.13 T: 58 / 68 cm AT 120 13 S
ATSP 80 80 BG ATSPA 90 80 BTBS AT 45 80 SZWH
13,0 ATSP 90 80 BG 13,0 ATSPQ 100 80 13,0 AT 50 80 SZWH
ATSP 100 80 BG BTBS
ATSP 120 80 BG
62,75

62,75 62,75 Carcase height 37 cm

26.08 T: 58 / 68 cm 26.12 T: 58 / 68 cm 26.14 T: 58 / 68 cm 26.15 T: 36 / 48 / 58 / 68 cm

ATSP 45 80 BZV ATSPA 80 80 BZW AT 60 80 SZWH AT 30 37 Z
13,0 ATSP 50 80 BZV 13,0 13,0 AT 40 37 Z
ATSP 60 80 BZV AT 45 37 Z
33,0 AT 50 37 Z
62,75

62,75
AT 60 37 Z
62,75

AT 80 37 Z
AT 90 37 Z
AT 100 37 Z
26.09 T: 58 / 68 cm 26.12 T: 58 / 68 cm AT 120 37 Z
ATSP 45 80 BZ ATSPA 90 80 BZW 26.15
13,0 ATSP 50 80 BZ 13,0 T: 58 / 68 cm
ATSP 60 80 BZ ATSP 60 37 Z
ATSP 90 37 Z
62,75

ATSP 120 37 Z
62,75

Shelves 33,0

26.09 T: 58 / 68 cm 26.14 T: 36 / 58 cm
ATSP 50 80 BZW TR 30 80
13,0 TR 40 80
TR 45 80
TR 50 80
62,75

Corner sink units TR 60 80 Carcase height 50 cm

TR 90 80

26.09 T: 58 / 68 cm 26.13 T: 58 / 68 cm 26.14 T: 36 / 58 cm 26.16 T: 36 / 48 / 58 / 68 cm

ATSP 60 80 BZW ATEESP 105 80 B T3R 30 80 AT 30 50 SZ
ATEESP 110 80 B T3R 60 80 AT 40 50 SZ
13,0

13,0
13,0
ATEESP 115 80 B T3R 90 80 AT 45 50 SZ
ATEESP 125 80 B 33,0 AT 50 50 SZ
62,75

AT 60 50 SZ
62,75

AT 80 50 SZ
AT 90 50 SZ
AT 100 50 SZ
26.09 T: 58 / 68 cm 26.13 T: 58 cm AT 120 50 SZ
ATSP 80 80 BZW ATEDSP 92 80 B
13,0 ATSP 90 80 BZW 26.16 T: 58 / 68 cm
13,0

ATSP 100 80 BZW ATSP 60 50 BZ

13,0 ATSP 90 50 BZ
62,75

ATSP 120 50 BZ
62,75

33,0

26.09 T: 58 / 68 cm
ATSP 60 80 BZBS
13,0
62,75

Carcase height 66 cm

26.09 T: 58 / 68 cm 26.16 T: 36 / 48 / 58 / 68 cm
ATSP 80 80 BZ2 AT 30 66
13,0 ATSP 90 80 BZ2 AT 40 66
26,25 ATSP 100 80 BZ2 AT 45 66
ATSP 120 80 BZ2 AT 50 66
AT 60 66
Floor units

33,0
62,75
AVANCE

79.5 cm

26.10 T: 58 / 68 cm 26.16 T: 36 / 48 / 58 / 68 cm
ATSP 60 80 BZ2C AT 80 66
13,0
AT 90 66
AT 100 66
26. 26,25

33,0
62,75

26.10 T: 58 / 68 cm
13,0
ATSP 80 80 BZ2C
ATSP 90 80 BZ2C
26,25 ATSP 100 80 BZ2C
ATSP 120 80 BZ2C
33,0

26.11 T: 58 / 68 cm
ATQ 60 80 S
13,0

62,75

26.11 T: 58 / 68 cm
ATSPA 90 80 BTZ
13,0 ATSPQ 100 80 BTZ
62,75

26.11 T: 58 / 68 cm
ATSPA 80 80 BTZW
13,0 ATSPQ 90 80 BTZW
62,75

26. 1/2022
 Price group
Floor units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Floor unit Carcase depth 56 cm
13,0 1 drawer AT3080S L/R 30 415 449 459 482 543 604 653
1 door AT4080S L/R 40 424 458 469 494 565 634 686
2 adjustable shelves AT4580S L/R 45 431 464 480 504 577 649 699
62,75

AT5080S L/R 50 435 469 482 506 584 663 716

AT6080S L/R 60 446 482 506 530 612 694 751
Diagram shows L

Floor unit Carcase depth 56 cm

13,0
2 drawers AT8080SG 80 690 747 784 823 947 1068 1151
2 doors AT9080SG 90 704 762 804 845 972 1099 1185
2 adjustable shelves AT10080SG 100 719 776 823 862 997 1130 1218
AT12080SG 120 746 804 862 901 1048 1192 1284
62,75
120 cm unit with centre post.

Pullout unit Carcase depth 56 cm

13,0
1 drawer AT3080SZIZ 30 678 738 749 784 855 924 959
1 pullout AT4080SZIZ 40 686 749 761 800 873 942 975
1 inner pullout AT4580SZIZ 45 692 758 772 817 887 959 993
62,75 AT5080SZIZ 50 696 763 776 820 895 971 1009
AT6080SZIZ 60 716 781 804 849 931 1010 1048
AT8080SZIZ 80 895 977 1010 1066 1182 1296 1340
AT9080SZIZ 90 933 1018 1051 1109 1229 1351 1439
AT10080SZIZ 100 971 1058 1090 1153 1280 1406 1533

Inner pullout exchange ANISIZ 0

instead of 1 inner pullout
1 inner drawer will be supplied.

Pullout unit Carcase depth 56 cm

13,0 1 drawer AT3080SZIS2 30 737 807 820 862 922 982 1012
1 pullout AT4080SZIS2 40 748 818 827 875 944 1013 1044
2 inner drawers AT4580SZIS2 45 754 825 842 889 960 1030 1061
62,75 AT5080SZIS2 50 765 835 849 895 972 1048 1081
AT6080SZIS2 60 782 854 882 929 1008 1089 1123

Pullout unit Carcase depth 56 cm

13,0
1 drawer AT3080SZ2 30 761 830 842 889 985 1081 1136
26,25 2 pullouts AT4080SZ2 40 769 843 852 899 1001 1105 1170
AT4580SZ2 45 779 850 865 913 1020 1126 1191
33,0 AT5080SZ2 50 785 856 871 918 1029 1136 1206
AT6080SZ2 60 804 882 902 953 1066 1180 1249
AT8080SZ2 80 1085 1188 1218 1286 1474 1662 1750
AT9080SZ2 90 1129 1235 1269 1336 1526 1716 1818
AT10080SZ2 100 1194 1304 1336 1410 1611 1808 1919
AT12080SZ2 120 1257 1374 1406 1484 1693 1899 2019

Pullout unit Carcase depth 56 cm

13,0
3 drawers AT3080S3Z 30 823 898 912 963 1058 1151 1205
13,0
13,0 1 pullout AT4080S3Z 40 833 910 919 972 1073 1177 1239
AT4580S3Z 45 843 919 938 989 1094 1199 1261
33,0 AT5080S3Z 50 851 931 944 995 1106 1215 1278
AT6080S3Z 60 871 953 976 1029 1144 1259 1326
AT8080S3Z 80 1164 1272 1302 1375 1563 1750 1835
AT9080S3Z 90 1206 1319 1352 1425 1616 1805 1903
AT10080S3Z 100 1271 1389 1420 1500 1700 1898 2004
AT12080S3Z 120 1334 1458 1492 1572 1781 1987 2103

1/2022 26.01
 Price group
Function floor units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Storage unit Carcase depth 56 cm
13,0
1 fixed blender AT1580BZR 15 493 539 560 594 655 714 768
1 pullout (depth 50 cm)
2 metal boards each with
2 divisions
62,75

Towel unit Carcase depth 56 cm

13,0
with ventilation holes in the rear wall AT1580BH L/R 15 313 342 361 384 445 505 570
1 fixed blender
1 extending towel rail
62,75 2-rods, chromed
(installation depth 50 cm)

Towel unit Carcase depth 56 cm

13,0
with ventilation holes in the rear wall AT1580BZH 15 509 555 577 609 669 728 783
1 fixed blender
1 pullout (depth 50 cm)
62,75
1 extending towel rail
2-rods, chromed
(installation depth 50 cm)
1 metal board

Towel unit Carcase depth 56 cm

13,0 with ventilation holes in the rear wall AT3080SH L/R 30 442 477 486 512 573 633 678
1 drawer
1 extending towel rail
62,75 3-rails, chromed
(installation depth 50 cm)
Diagram shows L

Storage unit Carcase depth 56 cm

13,0 1 drawer AT3080SZRK L/R 30 577 630 642 677 736 795 834
1 pullout (depth 50 cm)
2 wire baskets
62,75
1 drop-in tray

Diagram shows L Max. load capacity 16 kg per pullout.

Bread cupboard Carcase depth 56 cm

13,0 1 drawer AT3080SZBR 30 722 744 763 825 871 914 948
1 pullout
1 frame with bread bag
for long french loaves
62,75
1 bottle arrangement

Bottle cupboard Carcase depth 56 cm

13,0 1 drawer AT3080SZISF 30 744 814 825 870 931 991 1017
1 pullout
1 inner drawer
1 removable wire basket
62,75
holding 8 bottles

For max. 40 cm high bottles.

Storage unit Carcase depth 56 cm

13,0 1 drawer AT3080SZIS2K 30 838 913 925 975 1035 1095 1116
1 pullout
2 inner drawers
2 removable baskets
62,75

Niche door AT3080N L/R 30 364 376 416 452 506 559 605
13,0

1 door strapped together with original AT4080N L/R 40 369 387 427 460 519 578 631
recessed handle and attached plinth AT4580N L/R 45 387 396 431 465 524 583 639
62,75

no rear panel AT5080N L/R 50 390 399 442 472 540 607 665
no floor AT6080N L/R 60 398 407 450 479 555 631 690
Diagram shows L
Fixing sides in matching carcase colour.
Plinth omitted with AN TU 85.
No further front divisions possible.

26.02 1/2022
 Price group
Corner floor units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Corner floor unit Carcase depth 56 cm
Planning depth 65 resp. 75 cm
13,0

Door width 40 cm
Actual space 105 (102 up to 118 cm) ATEE10580S L/R 100 703 776 804 855 998 1141 1250
Door width 45 cm
62,75

Actual space 110 (107 up to 123 cm) ATEE11080S L/R 100 703 776 804 855 998 1141 1250
Door width 50 cm
Actual space 115 (112 up to 128 cm) ATEE11580S L/R 100 703 776 804 855 998 1141 1250
Diagram shows L
Door width 60 cm
Actual space Actual space 125 (122 up to 138 cm) ATEE12580S L/R 100 781 854 882 933 1076 1219 1328
1.7
1 drawer
1 door
Pl.depth

56/66
100 2 adjustable shelves
7.3 1 inner blender with angle blender ATPEEW780 7 0 0 0 0 0 0 0
Door width adjustable from 4 to 10 cm
Extra charge per 5 cm additional AMPTP5 5 11 14 14 17 21 24 35
width (up to max. 20 cm)

Corner floor unit Carcase depth 56 cm

Planning depth 65 resp. 75 cm ATEE11580SD L/R 100 886 977 1009 1072 1214 1355 1454
13,0

Actual space 115 (112 up to 128 cm)

1 drawer
1 door, 50 cm wide
62,75

2 semi-circular swing-out shelves

with chromium plated railing
Diagram shows L
1 inner blender with angle blender ATPEEW780 7 0 0 0 0 0 0 0
Actual space adjustable from 4 to 10 cm
1.7
Extra charge per 5 cm additional AMPTP5 5 11 14 14 17 21 24 35
width (up to max. 20 cm)
Pl.depth

56/66
100
7.3
Door width

Corner floor unit Carcase depth 56 cm

13,0

Planning depth 65 resp. 75 cm Door width 45 cm

Actual space 110 (107 up to 123 cm) ATEE11080SLM L/R 100 1250 1342 1372 1438 1587 1736 1819
Door width 50 cm
Actual space 115 (112 up to 128 cm) ATEE11580SLM L/R 100 1250 1342 1372 1438 1587 1736 1819
62,75

Door width 60 cm
Actual space 125 (122 up to 138 cm) ATEE12580SLM L/R 100 1358 1450 1480 1546 1695 1844 1927
Diagram shows L
1 drawer
Actual space 1 door
1.7
2 height adjustable swing-out shelves
with chromium plated railing
Pl.depth

56/66
100 2 rotating shelf cushionings
7.3 for installation on site
Door width 1 inner blender with angle blender ATPEEW780 7 0 0 0 0 0 0 0
adjustable from 4 to 10 cm
Extra charge per 5 cm additional AMPTP5 5 11 14 14 17 21 24 35
width (up to max. 20 cm)

Please note: when placing an order, it is imperative to specify the actual floor measurement, the angle blender ATPEEW 7 .. is adapted at factory.
The legs of the angle blender are free to choose from 4 - 10 cm width. For more than 10 cm please note extra charge MP TP 5.

1/2022 26.03
 Price group
Corner floor units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Carousel floor unit Carcase depth 56 cm
13,0

Floor dimensions 81.7 x 81.7 cm ATE8280K 80 991 1098 1113 1185 1294 1401 1431
1 swivel door, self adhesive
1 carousel 360° revolving
62,75

2 rotating shelves with metal railing,

chromium plated plus dividers,
80 upper shelf height adjustable
56,6

Special handle solution see page 10.16.

On request supplied unassembled.
Not possible with worktops less than 3 cm thickness.
80
56,6

Carousel floor unit Carcase depth 56 cm

13,0

Floor dimensions 91.7 x 91.7 cm ATE9280K 90 1077 1193 1214 1293 1418 1543 1560
1 swivel door, self adhesive
1 carousel 360° revolving
62,75

2 rotating shelves with metal railing,

chromium plated plus dividers,
90
upper shelf height adjustable
66,6

Special handle solution see page 10.16.

On request supplied unassembled.
90

Not possible with worktops less than 3 cm thickness.

66,6

Additional carousel shelf TE80KB 100

1 rotating shelf with metal railing, TE90KB 113
chromium plated including dividers
for extending to a third level

Diagonal corner unit 135° Carcase depth 56 cm

13,0

Floor dimensions 91.7 x 91.7 cm ATED9280BK L/R 90 999 1106 1133 1207 1291 1373 1429
1 fixed blender
1 door, 40 cm wide
2 corner blenders
62,75

1 carousel 360° revolving

2 rotating shelves with metal
Diagram shows L
railing and adjustable divisions
90
66
On request supplied unassembled.
90
66

,5
39

26.04 1/2022
 Price group
Built-under oven/microwave housing units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Built-under oven/microwave housing unit Carcase depth 56 cm
1 niche max. ATH6080Z 60 483 528 542 572 627 681 696
width: 56.5 / 57.7 / 72.5 / 86.5 cm ATH6180Z 61 486 533 553 577 645 713 734
41,0 height: 38-52 cm ATH7680Z 76 492 542 567 594 665 735 756
27,0
1 pullout ATH9080Z 90 632 691 718 760 827 892 940

Front with chamfered edge at the bottom for opening.

Built-under oven housing unit Carcase depth 56 cm

1 niche max. 56.5 x 60 cm ATH6080S 60 355 370 384 413 448 480 489
1 drawer

Front with chamfered edge at the bottom for opening.

19,0
Plinth steps from 16 cm plinth height possible.

Built-under oven housing unit Carcase depth 56 cm

1 niche max. ATH6080B 60 244 254 256 263 296 331 334
width: 56.5 / 72.5 / 88 cm ATH7680B 76 298 323 333 346 352 359 376
height: 73.4 cm ATH9180B 91 469 506 514 539 550 560 579
5,6 1 blender

Built-under oven housing unit Carcase depth 56 cm

1 niche max. 56.5 x 60 cm ATH6080SO 60 359 389 401 421 448 469 481
1 plinth drawer (installation depth 50 cm)

Only for plinth height 10 cm possible.

19,0
No adjustable plinth legs.

When installed near a corner situation allowances must be made for drawers and pullouts in the adjacent corner to avoid fouling cooker knobs and handles
increase corner blender width.

Programme TOCCO-A one-sided with thick edge at widths of 61, 76 and 91 cm.

Price group
Hob units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Hob unit Carcase depth 56 cm
13,0
1 blender ATK6080BZIZ 60 723 790 813 856 939 1020 1057
1 pullout
1 inner pullout
62,75

Control panel on top.

Inner pullout exchange ANISIZ 0

instead of 1 inner pullout
1 inner drawer will be supplied.

Hob unit Carcase depth 56 cm

13,0
1 blender ATK6080BZ2 60 747 823 845 895 1008 1121 1192
26,25 2 pullouts ATK8080BZ2 80 1028 1129 1162 1228 1415 1599 1692
ATK9080BZ2 90 1071 1177 1210 1280 1469 1656 1761
33,0 Control panel on top. ATK10080BZ2 100 1136 1247 1280 1352 1552 1748 1860
ATK12080BZ2 120 1199 1316 1348 1425 1632 1838 1961

Blender factory drilled ANBLBO 53 53 53 53 53 53 53

Blender has holes for control knobs

Please state hob type, accessories for hob,

worktop and worktop thickness.

1/2022 26.05
 Price group
Hob units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Blender factory drilled ANBLBO1 53 53 53 53 53 53 53
7 drill holes (5x operating knob, 2x socket)
50 mm diameter.
Placed on the blender in height and width.
Suitable for Bora Professional.

Specify deviations in drill hole diameter and

placement in the order!

Blender factory drilled ANBLBO2 53 53 53 53 53 53 53

5 drill holes for operating knobs 50 mm diameter.
Placed on the blender in height and width.
Suitable for Bora Professional.

Specify deviations in drill hole diameter and

placement in the order!

Blender factory drilled ANBLBO3 53 53 53 53 53 53 53

2 drill holes 50 mm diameter for Bora sockets.
Placement on the blender 100 mm each from
the outside.

Specify deviations in drill hole diameter and

placement in the order!

Hob unit Carcase depth 56 cm

13,0
1 protective screen ATK6080SZ2 60 873 948 971 1021 1136 1253 1318
26,25 1 drawer 6.3 cm high, ATK8080SZ2 80 1154 1253 1286 1355 1544 1733 1817
(depth 50 cm) ATK9080SZ2 90 1197 1301 1335 1405 1595 1788 1887
33,0 2 pullouts ATK10080SZ2 100 1263 1373 1405 1476 1678 1881 1985
ATK12080SZ2 120 1327 1442 1472 1553 1763 1971 2087
Control panel on top.
For AP..1.. and AP..2.. not available.

Planning tips
Floor units with drawers will be given a cable protection on request, for use with hobs with sensor control above.
Please plan in addition the cable protection e.g. AN MU2.

Cupboard with drawer above, For worktop thickness

prepared for hob larger than 1.7 cm
Protective cable shelf, removable ANMU2 79
use of 6.3 cm high drawer
(without strengthening)
Installation depth 50 cm.

Necessary to state appliance.

Plan additional strengthening
AN AP2 GRP, see page 15.05.

Ventilation gap below ANTKSP 21

the worktop
For hob units with drawer above
Ventilation gap 2.5 mm

Necessary to state appliance.

Do not use in combination with thin worktops
and cupboards of more than 60 cm width!

Cut-out floor unit side ANMU2S 43

cutout 50 x 4.2 cm at the
side upper edge

For hobs across several cupboards.

Floor unit prepared for under-floor ANTILGER 145

extractor
The cupboard is prepared with the necessary
appliance clearance below the hob.
Rear wall construction is prepared for the
respective appliance requirements.
The lower pullout is shortened, depending on
the choice of appliance.

Essential to state appliance and planning-relevant

accessories required, e.g. recirculating air, extraction,
air circulation unit, sound absorber etc.

26.06 1/2022
 Price group
Hob units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Floor unit prepared for table Carcase depth 56 cm
13,0
ventilator AT8080BZ2TV 80 1088 1189 1221 1288 1474 1660 1751
26,25 1 blender AT9080BZ2TV 90 1131 1237 1270 1340 1528 1717 1820
2 pullouts AT10080BZ2TV 100 1196 1306 1340 1412 1612 1808 1921
33,0 Back wall can be removed from the AT12080BZ2TV 120 1259 1375 1408 1485 1693 1897 2021
cupboard interior.

10 Pullout depth 40 cm for cupboard depth 58 cm.

Pullout depth 50 cm for cupboard depth 68 cm.

The cupboard is prepared with the necessary space for the appliance underneath the hob.
It is dimensionally tailored to the following appliances:
BORA: BHA, BFIA, PURA, PUXA
MIELE: KMDA - Series
BERBEL: BKF83DLP
ELICA: NIKOLATESLA
NOVY: UP, UPSIDE, ONE
AEG: COMBOHOB - 2 in 1 hob-extractor-combination
By pulling forward the back wall, there is no need for leaving space for an exhaust air duct.
Please note worktop depth of at least 60 cm.
Minimum plinth height 10 cm!

Price group
Fronts for built-under appliances
Carcase height 79.5 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Original front with for refrigerators
13,0 drawer partitioning AGFV4580S L/R 45 193 215 239 251 305 358 384
If necessary, with flush-with-carcase blender AGFV6080S L/R 60 209 224 259 273 334 396 427
at the top, behind the front
For fully integrated dishwasher and for dishwashers
for integrated built-under fridges, AGFV4580SM 45 193 215 239 251 305 358 384
62,75
height 82 - 87 cm. AGFV6080SM 60 209 224 259 273 334 396 427

Special handle solution see page 10.16.

Please state appliance model on order!
Appliance plinth base not necessary.
Note:
Form-wise not to be recommended!
Check use of AGFV 60 80 61 S!

Original front with AGFV608061S 60 246 265 298 311 375 437 466
13,0 drawer partitioning
with original recessed handle on the front
for fully integrated dishwasher,
height 82 - 87 cm.

62,75

Original front with AGFV608061SZ2 60 343 359 408 432 546 661 710
13,0 drawer- and pullout partitioning
with original recessed handle on the front
for fully integrated dishwasher,
26,25 height 82 - 87 cm.

33,0

Special handle solution see page 10.16.

Permitted appliances: Miele (min. plinth height 7 cm), Bosch, Siemens, Neff and Gaggenau (min. plinth height 7 cm with Vario hinge), if necessary exchange
spring set. Worktop depth min. 63 cm. Take into consideration extra deep visible sides.

1/2022 26.07
 Price group
Fronts for built-under appliances
Carcase height 79.5 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Original front with AGFV608061S3Z 60 383 404 458 489 609 733 829
13,0 drawer- and pullout partitioning
with original recessed handle on the front
13,0 for fully integrated dishwasher,
13,0 height 82 - 87 cm.

33,0

Original front with AGFV4580SG 45 223 238 267 279 333 386 408
drawer partitioning AGFV6080SG 60 232 249 285 298 361 424 453
2 parts hinged front panel
for fully integrated dishwasher,
height 82 - 87 cm.

Special handle solution see page 10.16.

For smaller plinth heights 10 cm.
Please state appliance model on order!
Note:
Form-wise not to be recommended!
Check use of AGFV 60 80 61 S!

Original front AGFT4580G 45 143 157 177 213 251 295 348
2 parts hinged front panel for AGFT6080G 60 146 161 184 227 277 325 378
partly integrated dishwashers,
height 82 - 87 cm.

Please state appliance model on order!

Appliance plinth base GSU45 45 33

GSU60 60 36
Variable height between 4 and 14 cm.
For dishwashers.
Plinth base adapted on site.

Special handle solution see page 10.16.

Permitted appliances: Miele (min. plinth height 7 cm), Bosch, Siemens, Neff and Gaggenau (min. plinth height 7 cm with Vario hinge), if necessary exchange
spring set. Worktop depth min. 63 cm. Take into consideration extra deep visible sides.

Price group
Sink units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Sink unit Carcase depth 56 cm
13,0
no rear panel ATSP4580B L/R 45 313 342 355 372 446 517 575
1 fixed blender ATSP5080B L/R 50 317 345 370 390 459 528 589
1 door ATSP6080B L/R 60 327 354 378 398 479 559 622
62,75

1 metal water drip floor

Diagram shows L

13,0 Sink unit Carcase depth 56 cm

no rear panel ATSP8080BG 80 469 509 545 572 693 814 912
2 fixed blenders ATSP9080BG 90 483 522 568 595 718 839 947
2 doors ATSP10080BG 100 498 538 583 619 746 870 980
1 metal water drip floor ATSP12080BG 120 524 567 621 669 798 926 1047
62,75
120 cm unit with centre post.

Sink unit Carcase depth 56 cm

13,0
no rear panel ATSP4580BZV 45 339 379 406 437 508 575 627
1 fixed blender ATSP5080BZV 50 351 393 419 450 516 581 629
1 front loose ATSP6080BZV 60 367 408 437 464 529 596 643
62,75

no hinges and built-in refuse bin

1 metal water drip floor

Recycling containers for fitting on site.

26.08 1/2022
 Price group
Sink units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Sink pullout unit Carcase depth 56 cm
13,0
no rear panel ATSP4580BZ 45 462 505 530 562 631 699 751
1 fixed blender ATSP5080BZ 50 474 518 545 574 640 706 753
1 pullout (depth 45 cm) ATSP6080BZ 60 492 535 562 589 656 721 768
62,75

1 metal water drip floor

Recycling containers for fitting on site.

Sink waste bin unit Carcase depth 56 cm

13,0
no rear panel ATSP5080BZW 50 591 634 659 690 758 826 874
1 fixed blender
1 pullout (depth 50 cm)
62,75

no back section
1 odour trap Container change
1 frame with 3 waste bins, ANTSP20L 0
20 contents 1x 14 ltr., 1x 10 ltr. and
2,5 2,5
1x 10 ltr. with bio lid
10
14 in addition 2x 2.5 ltr.
10
1 metal water drip floor

Available height 34.5 cm to carcase top edge!

Sink waste bin unit Carcase depth 56 cm

13,0
no rear panel ATSP6080BZW 60 599 643 668 697 779 858 908
1 fixed blender
1 pullout (depth 50 cm)
62,75

no back section
1 odour trap Container change
1 frame with 3 waste bins, ANTSP20L 0
2,5 2,5
20 contents 1x 20 ltr., 1x 10 ltr. and
1x 10 ltr. with bio lid
10
20 in addition 2x 2.5 ltr.
10
1 metal water drip floor

Available height 34.5 cm to carcase top edge!

Sink waste bin unit Carcase depth 56 cm

13,0
no rear panel ATSP8080BZW 80 823 898 919 971 1064 1155 1200
1 fixed blender ATSP9080BZW 90 865 945 970 1022 1117 1211 1270
1 pullout (depth 45 cm) ATSP10080BZW 100 908 992 1017 1072 1172 1269 1340
62,75

1 odour trap
1 frame with 4 waste bins,
contents 1x 18 ltr., 1x 12 ltr.,
1x 8 ltr. with bio lid and 1x 2.5 ltr.
2,5 12 1 metal water drip floor

8 18
Available height 41 cm to carcase top edge!

Sink waste bin unit Carcase depth 56 cm

13,0
no rear panel ATSP6080BZBS 60 642 652 693 705 792 877 939
1 fixed blender
1 pullout with BLANCOSELECT-
62,75

waste disposal system (depth 40 cm)

1 extendible system lid Container change
2 waste bins, ANTSP15L 0
contents 1x 30 ltr. and 1x 19 ltr. ANTSP8L 0
1 metal water drip floor
30 19
Available height 41 cm to carcase top edge!

Sink pullout unit Carcase depth 56 cm

13,0
no rear panel ATSP8080BZ2 80 1024 1126 1157 1225 1415 1603 1689
26,25 1 fixed blender ATSP9080BZ2 90 1067 1173 1206 1275 1467 1656 1756
1 pullout (depth 45 cm) ATSP10080BZ2 100 1133 1242 1275 1348 1550 1748 1857
33,0 with lowered wooden back piece ATSP12080BZ2 120 1194 1312 1344 1422 1631 1841 1958
1 cut-out cover for pop-up-waste
14,5-29,5 for installation on site
cut-out width 14.5 up to 29.5 cm
25 1 pullout (depth 45 cm)
1 metal water drip floor

upper pullout

1/2022 26.09
 Price group
Sink units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Sink waste bin unit Carcase depth 56 cm
13,0
no rear panel ATSP6080BZ2C 60 981 1059 1079 1131 1246 1360 1427
26,25 1 fixed blender
1 pullout front height 26.25 cm (depth 30 cm)
33,0 with lowered wooden back piece
1 cut-out cover for pop-up-waste Container change
for installation on site ANTSP20L 0
cut-out width 14.5 up to 29.5 cm
10
1 pullout front height 33 cm (depth 45 cm)
20 max. load capacity 15 kg
10
1 odour trap
1 frame for plinth-cargo system
14,5-29,5 with 3 waste containers
contents 1x 20 ltr., 1x 10 ltr. and
25
1x 10 ltr. with bio lid
1 plinth in cupboard width
upper pullout joint to the floor 1.3 cm

Plinth height min. 10 cm.

Available height 49.5 cm to carcase top edge!
Opening support HFO3 not possible.

Sink waste bin unit Carcase depth 56 cm

13,0
no rear panel ATSP8080BZ2C 80 1342 1444 1477 1545 1733 1922 2008
26,25 1 fixed blender ATSP9080BZ2C 90 1387 1492 1525 1593 1786 1975 2075
1 pullout front height 26.25 cm (depth 45 cm) ATSP10080BZ2C 100 1452 1560 1593 1667 1868 2068 2177
33,0 with lowered wooden back piece ATSP12080BZ2C 120 1513 1631 1664 1740 1950 2159 2278
1 cut-out cover for pop-up-waste
for installation on site
cut-out width 14.5 up to 29.5 cm
1 pullout front height 33 cm (depth 45 cm) Container change
10
20 max. load capacity 15 kg ANTSP20L 0
10
1 odour trap
1 frame for plinth-cargo system
14,5-29,5 with 3 waste containers
contents 1x 20 ltr., 1x 10 ltr. and
25 1x 10 ltr. with bio lid
1 plinth in cupboard width
joint to the floor 1.3 cm
upper pullout
Plinth height min. 10 cm.
Available height 49.5 cm to carcase top edge!
Opening support HFO3 not possible.

Sink unit with back wall MPRU 44

1 cover for on-site hose cutout

If a rear panel is required for a sink unit,

please always order this unit with the code MP RU.

Opening support for HFO3 175

sink pullout cupboards
Plinth base prepared for electrical unit
Operation using sensor in the plinth area
Integrated orientation light, can be switched off
110 - 230 volt
Intensity adjustable
Dimensions 16 x 30 x 3.5 cm
Cable length 200 cm, plug-in power supply
internationally adaptable, colour grey
Water protection shelf is deleted

From cupboard width 40 cm.

Door gap enlargement not necessary.

Container change .
1x 20 ltr. container with bio lid ANTSP20L 0
instead of 2x 10 ltr. containers

Container change BLANCOSELECT .

3x 15 ltr. containers with 1 bio lid ANTSP15L 0
instead of 1x 30 ltr. and 1x 19 ltr. containers

2x 8 ltr. containers with 1 bio lid ANTSP8L 0

instead of 1x 19 ltr. container

26.10 1/2022
 Price group
Sink units for hot water taps
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Hot water towel unit Carcase depth 56 cm
13,0 no rear panel ATQ6080S L/R 60 537 573 597 621 703 785 842
1 drawer
1 door
1 compartment 36.7 cm wide for taps
62,75 accessories
Diagram shows R
1 middle side removable
1 compartment 18.4 cm wide with towel holder
1 solid base, above

The compartment for taps accessories determines

style left or right.

Sink pullout unit for Carcase depth 56 cm

13,0
hot water taps Door width 30 cm
no rear panel ATSPA9080BTZ L/R 90 662 716 774 835 952 1067 1150
1 fixed blender Door width 40 cm
62,75

1 door 30 cm or 40 cm wide in front of ATSPQ10080BTZ L/R 100 671 724 783 844 972 1098 1183
compartment for taps accessories
Diagram shows R 1 middle side removable
1 pullout 60 cm wide (depth 45 cm)
1 metal water drip floor

Recycling containers for fitting on site.

Sink waste bin unit for Carcase depth 56 cm

13,0
hot water taps Door width 30 cm
no rear panel ATSPA8080BTZW L/R 80 753 808 856 920 1036 1148 1230
1 fixed blender Door width 40 cm
62,75

1 door 30 cm or 40 cm wide in front of ATSPQ9080BTZW L/R 90 762 816 864 929 1056 1179 1264
compartment for taps accessories
Diagram shows R 1 middle side removable
1 pullout 50 cm wide (depth 50 cm)
1 odour trap Container change
26,7 1 frame with 3 waste bins, ANTSP20L 0
36,7 contents 1x 14 ltr., 1x 10 ltr. and
2,5 2,5 1x 10 ltr. with bio lid
10 in addition 2x 2.5 ltr.
14
10 1 metal water drip floor

Available height 34.5 cm to carcase top edge!

Sink waste bin unit for Carcase depth 56 cm

13,0
hot water taps Door width 30 cm
no rear panel ATSPA9080BTZW L/R 90 768 824 880 943 1075 1205 1289
1 fixed blender Door width 40 cm
62,75

1 door 30 cm or 40 cm wide in front of ATSPQ10080BTZW L/R 100 778 832 888 951 1095 1236 1322
compartment for taps accessories
Diagram shows R 1 middle side removable
1 pullout 60 cm wide (depth 50 cm)
1 odour trap Container change
26,7 1 frame with 3 waste bins, ANTSP20L 0
36,7 contents 1x 20 ltr., 1x 10 ltr. and
2,5 2,5 1x 10 ltr. with bio lid
10 in addition 2x 2.5 ltr.
20
10 1 metal water drip floor

Available height 34.5 cm to carcase top edge!

The compartment for taps accessories determines style left or right.

The true width for the installation of boilers and cartridges is 26.7 cm or 36.7 cm.
Please plan sink installation above pullout, available height to carcase top edge see respective cupboard!

1/2022 26.11
 Price group
Sink units for hot water taps
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Sink waste bin unit for Carcase depth 56 cm
13,0
hot water taps Door width 30 cm
no rear panel ATSPA9080BTBS L/R 90 812 833 905 951 1089 1222 1320
1 fixed blender Door width 40 cm
62,75

1 door 30 cm or 40 cm wide in front of ATSPQ10080BTBS L/R 100 821 842 913 960 1108 1253 1354
compartment for taps accessories
Diagram shows R 1 middle side removable
1 pullout with BLANCOSELECT-
waste disposal system (depth 40 cm) Container change
26,7 1 extendible system lid ANTSP15L 0
36,7 2 waste bins, ANTSP8L 0
contents 1x 30 ltr. and 1x 19 ltr.
1 metal water drip floor
30 19
Available height 41 cm to carcase top edge!

Sink waste bin unit for Carcase depth 56 cm

13,0
hot water taps ATSPA8080BZW L/R 80 717 770 820 884 999 1112 1194
no rear panel
1 fixed blender
62,75

1 compartment for taps accessories

1 middle side removable Container change
Diagram shows R 1 pullout (depth 50 cm) ANTSP20L 0
1 odour trap
1 frame with 3 waste bins,
26,7 contents 1x 14 ltr., 1x 10 ltr. and
1x 10 ltr. with bio lid
2,5 2,5 in addition 2x 2.5 ltr.
10 1 metal water drip floor
14
10
Available height 34.5 cm to carcase top edge!

Sink waste bin unit for Carcase depth 56 cm

13,0
hot water taps ATSPA9080BZW L/R 90 732 788 843 906 1039 1168 1253
no rear panel
1 fixed blender
62,75

1 compartment for taps accessories

1 middle side removable Container change
Diagram shows R 1 pullout (depth 50 cm) ANTSP20L 0
1 odour trap
1 frame with 3 waste bins,
26,7 contents 1x 20 ltr., 1x 10 ltr. and
1x 10 ltr. with bio lid
2,5 2,5 in addition 2x 2.5 ltr.
10 1 metal water drip floor
20
10
Available height 34.5 cm to carcase top edge!

The compartment for taps accessories determines style left or right.

The true width for the installation of boilers and cartridges is 26.7 cm or 36.7 cm.
Please plan sink installation above pullout, available height to carcase top edge see respective cupboard!

26.12 1/2022
 Price group
Corner sink units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Corner sink unit Carcase depth 56 cm
13,0

Planning depth 65 resp. 75 cm Door width 40 cm

Actual space 105 (102 up to 118 cm) ATEESP10580B L/R 100 600 649 677 712 859 1007 1124
Door width 45 cm
Actual space 110 (107 up to 123 cm) ATEESP11080B L/R 100 600 649 677 712 859 1007 1124
62,75

Door width 50 cm
Actual space 115 (112 up to 128 cm) ATEESP11580B L/R 100 600 649 677 712 859 1007 1124
Diagram shows L
Door width 60 cm
Actual space Actual space 125 (122 up to 138 cm) ATEESP12580B L/R 100 678 727 755 790 937 1085 1202
1.7
no rear panel
1 fixed blender
Pl.depth

56/66
100 1 door
7.3 1 metal water drip floor
Door width 1 inner blender with angle blender ATPEEW780 7 0 0 0 0 0 0 0
adjustable from 4 to 10 cm
Extra charge per 5 cm additional AMPTP5 5 11 14 14 17 21 24 35
width (up to max. 20 cm)

Diagonal corner sink unit 135° Carcase depth 56 cm

13,0

Floor dimensions 91.7 x 91.7 cm ATEDSP9280B L/R 90 667 721 749 787 878 967 1045
1 fixed blender
1 door, 40 cm wide
2 corner blenders
62,75

1 metal water drip floor

Diagram shows L
On request supplied unassembled.
90
66
90
66

,5
39

Please note: when placing an order, it is imperative to specify the actual floor measurement, the angle blender ATPEEW 7 .. is adapted at factory.
The legs of the angle blender are free to choose from 4 - 10 cm width. For more than 10 cm please note extra charge MP TP 5.

Price group
Waste disposal floor units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Waste bin floor unit Carcase depth 56 cm
13,0
1 drawer AT3080SZWH 30 622 639 638 713 805 896 904
1 pullout (depth 50 cm) AT4080SZWH 40 639 656 657 729 839 949 956
1 odour trap
62,75
1 frame with 1 waste bin,
contents 1x 32 ltr.

32

Waste bin floor unit Carcase depth 56 cm

13,0
1 drawer AT4580SZWH 45 646 665 667 737 855 973 982
1 pullout (depth 50 cm) AT5080SZWH 50 653 673 676 746 874 999 1008
1 odour trap
62,75 1 frame with 2 waste bins,
contents 2x 32 ltr.

32

32

1/2022 26.13
 Price group
Waste disposal floor units
Carcase height 79.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Waste bin floor unit Carcase depth 56 cm
13,0
1 drawer AT6080SZWH 60 704 725 729 797 934 1070 1075
1 pullout (depth 50 cm)
1 odour trap
62,75

1 frame with 4 waste bins,

contents 2x 32 ltr., 1x 10 ltr. and
1x 10 ltr. with bio lid
32 10

32 10

Surface style
Floor shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 79.5 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Floor shelf unit Shelf unit depth 36.2 cm
2 adjustable shelves TR308036 10-30 316 329 432 537 - 598 684 561
TR408036 30-40 332 345 468 583 - 649 743 611
Widths in mm grid variably available. TR458036 40-45 340 353 486 606 - 674 772 636
Please state desired width. TR508036 45-50 347 361 503 629 - 700 802 659
TR608036 50-60 363 377 539 674 - 750 860 707
TR908036 60-90 410 425 646 811 - 902 1036 853

Shelf unit depth 58.2 cm

TR3080 10-30 330 343 454 563 - 627 717 607
TR4080 30-40 348 361 487 606 - 673 773 658
TR4580 40-45 356 370 504 627 - 698 801 683
TR5080 45-50 365 380 521 648 - 721 827 707
TR6080 50-60 383 398 555 691 - 769 882 756
TR9080 60-90 437 452 657 820 - 913 1047 904

Depth extensions 68.2 cm ANUT68 26 27 30 36 38 40 46 44

for floor shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.

Surface style
Floor shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 79.5 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm Neutral

FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Floor shelf unit, Shelf unit depth 36.2 cm
thick 2.8 cm T3R308036 10-30 415 429 543 657 692 726 820 698
Back panel with circumferential shadow joint T3R608036 30-60 477 493 677 829 873 916 1040 879
2 shelves T3R908036 60-90 536 552 807 995 1048 1100 1254 1054

Shelf unit interior colour = shelf unit exterior colour. Shelf unit depth 58.2 cm
Widths in mm grid variably available. T3R3080 10-30 433 447 571 691 727 762 863 752
Please state desired width. T3R6080 30-60 505 522 703 857 902 947 1078 945
Available without extra charge for free standing T3R9080 60-90 573 592 831 1017 1072 1127 1286 1133
planning, optional without back panel with visible
edges at the rear. Please state on order.

Depth extensions 68.2 cm ANUT68 26 27 30 36 38 40 46 44

for floor shelf units

Extra charge for basis shelf unit 58.2 cm deep.

26.14 1/2022
 Price group
Floor units
Carcase height 13.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Under worktop drawer Carcase depth 56 cm
13,0 Carcase height 13.25 cm AT3013S 30 226 247 253 267 291 321 349
1 drawer AT4013S 40 229 249 255 270 299 333 363
AT4513S 45 231 251 259 273 307 346 378
AT5013S 50 233 254 261 276 317 359 392
AT6013S 60 236 256 266 279 325 369 402
AT8013S 80 251 276 285 299 347 394 428
AT9013S 90 260 284 296 310 359 406 442
AT10013S 100 267 293 304 318 368 417 453
AT12013S 120 279 310 325 336 389 440 477

Price group
Floor units
Carcase height 36.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Pullout unit Carcase depth 56 cm
1 pullout AT3037Z 30 486 505 518 588 734 879 898
33,0 AT4037Z 40 500 519 530 605 751 895 915
AT4537Z 45 512 530 546 619 765 911 935
AT5037Z 50 524 545 562 634 782 931 954
AT6037Z 60 536 559 575 653 800 947 973
AT8037Z 80 767 810 852 967 1185 1403 1455
AT9037Z 90 782 826 866 980 1213 1443 1496
AT10037Z 100 799 844 886 1001 1239 1473 1528
AT12037Z 120 832 878 915 1041 1286 1531 1570

Sink pullout unit Carcase depth 56 cm

no rear panel ATSP6037Z 60 575 599 614 692 839 985 1013
33,0 1 pullout (depth 45 cm) ATSP9037Z 90 761 802 844 959 1151 1345 1472
with lowered wooden back piece ATSP12037Z 120 809 854 894 1018 1225 1431 1550
1 cut-out cover for pop-up-waste
for installation on site
14,5-29,5
cut-out width 14.5 up to 29.5 cm
25 1 metal water drip floor

Floor units with the special carcase height of 36.5 and 49,75 cm have their own plinth arrangement. For the required working height (please state), the
plinth leg is extended and the cover width is adapted accordingly. Leg height increases and special cover widths are included in the cupboard price. The pla-
stic corners in matching cover colours are included.

Please note:
To ensure stability with this plinth arrangement, it is essential for the unit to be fixed to the wall. Free standing floor unit groups (island solutions) cannot
be used with this plinth construction. In these cases an appropriately constructed plinth platform SOPOD (see page 70.02) is essential. If necessary please
enquire by stating precise planning data.

1/2022 26.15
 Price group
Floor units
Carcase height 49.75 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Pullout unit Carcase depth 56 cm
13,0
1 drawer AT3050SZ 30 606 626 648 722 880 1037 1058
1 pullout AT4050SZ 40 616 638 663 736 894 1053 1075
33,0
AT4550SZ 45 629 653 676 753 912 1071 1098
AT5050SZ 50 641 666 691 768 929 1087 1114
AT6050SZ 60 655 677 706 785 945 1105 1132
AT8050SZ 80 1027 1072 1119 1242 1485 1729 1746
AT9050SZ 90 1045 1091 1139 1267 1512 1759 1786
AT10050SZ 100 1063 1113 1159 1287 1540 1792 1824
AT12050SZ 120 1098 1150 1198 1333 1593 1855 1900

13,0
Sink pullout unit Carcase depth 56 cm
no rear panel ATSP6050BZ 60 638 662 690 768 926 1085 1116
1 fixed blender ATSP9050BZ 90 977 1026 1072 1198 1443 1689 1717
33,0
1 pullout (depth 45 cm) ATSP12050BZ 120 1015 1068 1116 1250 1509 1768 1819
with lowered wooden back piece
14,5-29,5 1 cut-out cover for pop-up-waste
for installation on site
25
cut-out width 14.5 up to 29.5 cm
1 metal water drip floor

Floor units with the special carcase height of 36.5 and 49,75 cm have their own plinth arrangement. For the required working height (please state), the
plinth leg is extended and the cover width is adapted accordingly. Leg height increases and special cover widths are included in the cupboard price. The pla-
stic corners in matching cover colours are included.

Please note:
To ensure stability with this plinth arrangement, it is essential for the unit to be fixed to the wall. Free standing floor unit groups (island solutions) cannot
be used with this plinth construction. In these cases an appropriately constructed plinth platform SOPOD (see page 70.02) is essential. If necessary please
enquire by stating precise planning data.

Price group
Floor units
Carcase height 66.25 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Floor unit Carcase depth 56 cm
1 door AT3066 L/R 30 256 279 295 308 374 439 472
2 adjustable shelves AT4066 L/R 40 265 285 302 316 391 462 496
AT4566 L/R 45 270 292 307 324 402 480 517
AT5066 L/R 50 277 298 316 335 414 492 528
62,75 AT6066 L/R 60 288 310 327 345 435 525 567
Diagram shows L

Floor unit Carcase depth 56 cm

2 doors AT8066 80 361 393 433 465 588 710 772
2 adjustable shelves AT9066 90 383 410 448 485 611 737 801
AT10066 100 389 419 454 501 630 758 824
62,75

26.16 1/2022
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 36.5 cm
Side depth 34 cm FS3734 L/R 34 0 0 43 63 93 116 60
Side depth 46 cm FS3746 L/R 46 0 0 58 83 122 153 79

Carcase height 49.75 cm

Side depth 34 cm FS5034 L/R 34 0 0 44 65 93 117 62
Diagram shows R Side depth 46 cm FS5046 L/R 46 0 0 65 93 129 161 84

Carcase height 66.25 cm

Side depth 34 cm FS6634 L/R 34 0 0 49 72 104 130 69
Side depth 46 cm FS6646 L/R 46 0 0 77 113 161 203 108

Carcase height 79.5 cm

Side depth 34 cm FS8034 L/R 34 0 0 62 87 121 153 79
Side depth 46 cm FS8046 L/R 46 0 0 102 147 207 258 135

Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all floor units FSUL L/R 73 73 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 36.5 cm
Side depth up to 34 cm FSUEL3734 L/R 34 66 66 109 129 159 182 126
Side depth up to 46 cm FSUEL3746 L/R 46 66 66 124 149 188 219 145
Side depth up to 58 cm FSUEL3758 L/R 58 66 66 124 149 188 219 145
Diagram shows R Side depth up to 63 cm FSUEL3763 L/R 63 66 66 132 163 207 242 158
Side depth up to 68 cm FSUEL3768 L/R 68 107 107 173 204 248 283 199

Carcase height 49.75 cm

Side depth up to 34 cm FSUEL5034 L/R 34 66 66 110 131 159 183 128
Side depth up to 46 cm FSUEL5046 L/R 46 66 66 131 159 195 227 150
Side depth up to 58 cm FSUEL5058 L/R 58 66 66 131 159 195 227 150
Side depth up to 63 cm FSUEL5063 L/R 63 66 66 143 178 224 267 171
Side depth up to 68 cm FSUEL5068 L/R 68 107 107 184 219 265 308 212

Carcase height 66.25 cm

Side depth up to 34 cm FSUEL6634 L/R 34 66 66 115 138 170 196 135
Side depth up to 46 cm FSUEL6646 L/R 46 66 66 143 179 227 269 174
Side depth up to 58 cm FSUEL6658 L/R 58 66 66 143 179 227 269 174
Side depth up to 63 cm FSUEL6663 L/R 63 66 66 154 181 251 298 190
Side depth up to 68 cm FSUEL6668 L/R 68 107 107 195 222 292 339 231
Side depth up to 76 cm FSUEL6676 L/R 76 107 107 201 246 304 355 237

Carcase height 79.5 cm

Side depth up to 34 cm FSUEL8034 L/R 34 66 66 128 153 187 219 145
Side depth up to 46 cm FSUEL8046 L/R 46 66 66 168 213 273 324 201
Side depth up to 58 cm FSUEL8058 L/R 58 66 66 168 213 273 324 201
Side depth up to 63 cm FSUEL8063 L/R 63 66 66 180 232 302 363 223
Side depth up to 68 cm FSUEL8068 L/R 68 107 107 221 273 343 404 264
Side depth up to 76 cm FSUEL8076 L/R 76 107 107 230 287 360 422 273

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“ on page 10.14.

1/2022 26.17
 Price group
End panels
Width 5 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Floor unit end panel .
Front finish
wall-bound solution (one-sided)
62,75 Width 5 cm
Depth up to 62.5 cm
Diagram shows L for carcase height 36.5 cm ATW53758 L/R 5 236 246 273 308 353 393 420
ATW 5 37.. / ATW 5 66.. with recessed handle above Depth up to 70.0 cm
13,0 ATW53768 L/R 5 248 260 333 385 433 481 552

Depth up to 62.5 cm
for carcase height 49.75 cm ATW55058S L/R 5 277 288 325 361 408 456 491
62,75
with recessed handle (split front) Depth up to 70.0 cm
ATW55068S L/R 5 290 305 387 437 493 548 629
Diagram shows L
ATW 5 50..S / ATW 5 80..S Depth up to 62.5 cm
for carcase height 66.25 cm ATW56658 L/R 5 238 248 277 311 356 398 426
with recessed handle above Depth up to 70.0 cm
ATW56668 L/R 5 250 262 338 390 440 489 560

Depth up to 62.5 cm
for carcase height 79.5 cm ATW58058S L/R 5 281 294 328 367 416 463 497
with recessed handle (split front) Depth up to 70.0 cm
ATW58068S L/R 5 295 308 392 444 499 555 638

Please state the relevant L/R.

The end panel width is always 5 cm.

Floor unit end panel .

Front finish
island-solution (two-sided)
62,75 depth max. 120 cm
Width 5 cm
ATWI 5 37 / ATWI 5 66
for carcase height 36.5 cm ATWI537 5 332 345 397 474 527 581 676
13,0 with recessed handle above

for carcase height 49.75 cm ATWI550S 5 378 388 454 530 589 649 755
62,75 with recessed handle (split front)

for carcase height 66.25 cm ATWI566 5 336 352 403 480 536 590 687
ATWI 5 50 S / ATWI 5 80 S with recessed handle above

for carcase height 79.5 cm ATWI580S 5 383 394 460 539 600 660 767
with recessed handle (split front)

Please state the required depth, max. 120 cm is possible.

The end panel width is always 5 cm.

13,0 Floor unit end panel .

Front finish
26,25
wall-bound solution (one-sided)
Width 5 cm
33,0
Depth up to 62.5 cm
for carcase height 79.5 cm ATW58058SZ2 L/R 5 358 369 404 443 492 540 574
Diagram shows L Divided in height 33.0 and 66.25 cm Depth up to 70.0 cm
with recessed handle ATW58068SZ2 L/R 5 370 385 469 519 576 632 714

Please state the relevant L/R.

The end panel width is always 5 cm.

13,0 Floor unit end panel .

Front finish
26,25 island-solution (two-sided)
depth max. 120 cm
33,0
Width 5 cm

for carcase height 79.5 cm ATWI580SZ2 5 459 470 537 615 675 736 844
Divided in height 33.0 and 66.25 cm
with recessed handle

Please state the required depth, max. 120 cm is possible.

The end panel width is always 5 cm.

26.18 1/2022
 Price group
End panels
Width 5 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Side panel extension ANW5VERL 43 44 52 60 63 65 69
Side panel extended by plinth height
Interior visible side colour lacquered,
please state colour FS.

Connection to dishwasher ANW5GSM 46

Interior visible side colour lacquered,
please state colour FS.
Side plinth attached,
state plinth colour.

0,25 Door joint connection at the rear ANW5ANS 25

The side panel has the original edge style and
door joint on the reverse side.

For connection of the floor unit end panel to

cupboards or to a second floor unit end panel,
e.g. to deep isles.

Price group
45° mitre end panels

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
45° mitre end panel .
Front finish
wall-bound solution (one-sided)
62,75 on the front with 45° chamfered edge for mitre
transition with floor unit front
Diagram shows L Width 5 cm
ATW 5 37.. / ATW 5 66.. Depth up to 62.5 cm
13,0 for carcase height 36.5 cm ATW53758K45 L/R 5 236 246 273 308 353 393 420
with recessed handle above Depth up to 70.0 cm
ATW53768K45 L/R 5 248 260 333 385 433 481 552
62,75
Depth up to 62.5 cm
for carcase height 49.75 cm ATW55058K45S L/R 5 277 288 325 361 408 456 491
Diagram shows L with recessed handle (split front) Depth up to 70.0 cm
ATW 5 50.. / ATW 5 80.. ATW55068K45S L/R 5 290 305 387 437 493 548 629

Depth up to 62.5 cm
for carcase height 66.25 cm ATW56658K45 L/R 5 238 248 277 311 356 398 426
with recessed handle above Depth up to 70.0 cm
ATW56668K45 L/R 5 250 262 338 390 440 489 560

Depth up to 62.5 cm
for carcase height 79.5 cm ATW58058K45S L/R 5 281 294 328 367 416 463 497
with recessed handle (split front) Depth up to 70.0 cm
ATW58068K45S L/R 5 295 308 392 444 499 555 638
Carcase height 36.5 / 49.75 / 66.25 / 79.5 cm:
Not available in MINERA-A, TOCCO-A

Can be ordered in connection with processing type AN 5K45 see page 15.05. Please state L/R.
Please plan side panel depth flush-front, i.e. total depth to carcase edge + 2 mm (if handle-less 4 mm) + front thickness.

1/2022 26.19
 Price group
45° mitre end panels

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
45° mitre end panel for isles .
Front finish
island-solution (two-sided)
62,75
depth max. 120 cm
both sides with 45° chamfered edge for mitre
ATWI 5 37.. / ATWI 5 66..
transition with floor unit fronts
Width 5 cm
13,0

for carcase height 36.5 cm ATWI537K45 5 332 345 397 474 527 581 676
62,75 with recessed handle above

for carcase height 49.75 cm ATWI550K45S 5 378 388 454 530 589 649 755
ATWI 5 50.. / ATWI 5 80.. with recessed handle (split front)

for carcase height 66.25 cm ATWI566K45 5 336 352 403 480 536 590 687
with recessed handle above

for carcase height 79.5 cm ATWI580K45S 5 383 394 460 539 600 660 767
with recessed handle (split front)
Carcase height 36.5 / 49.75 / 66.25 / 79.5 cm:
Not available in MINERA-A, TOCCO-A

13,0 45° mitre end panel .

Front finish
26,25
wall-bound solution (one-sided)
on the front with 45° chamfered edge for mitre
33,0
transition with floor unit front
Width 5 cm
Diagram shows L
Depth up to 62.5 cm
for carcase height 79.5 cm ATW58058K45SZ2 L/R 5 358 369 404 443 492 540 574
Divided in height 33.0 and 66.25 cm Depth up to 70.0 cm
with recessed handle ATW58068K45SZ2 L/R 5 370 385 469 519 576 632 714
Not available in MINERA-A, TOCCO-A

13,0 45° mitre end panel for isles .

Front finish
26,25
island-solution (two-sided)
depth max. 120 cm
33,0
both sides with 45° chamfered edge for mitre
transition with floor unit fronts
Width 5 cm

for carcase height 79.5 cm ATWI580K45SZ2 5 459 470 537 615 675 736 844
Divided in height 33.0 and 66.25 cm
Not available in MINERA-A, TOCCO-A
with recessed handle

Side panel extension ANW5VERL 43 44 52 60 63 65 69

Side panel extended by plinth height
Interior visible side colour lacquered,
please state colour FS.

0,25 Door joint connection at the rear ANW5ANS 25

The side panel has the original edge style and
door joint on the reverse side.

For connection of the floor unit end panel to

cupboards or to a second floor unit end panel,
e.g. to deep isles.

Can be ordered in connection with processing type AN 5K45 see page 15.05. Please state L/R.
Please plan side panel depth flush-front, i.e. total depth to carcase edge + 2 mm (if handle-less 4 mm) + front thickness.

26.20 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Drawer unit blender .
Front finish
Diagram shows L
for under worktop drawer AT .. 13 S ATP2013 L/R 20 64 69 73 77 82 91 109
at carcase height 79.5 cm

Floor unit blender .

Front finish

for carcase height 36.5 cm ATP2037 L/R 20 71 75 75 77 85 94 114

ATP 20 37 / ATP 20 66
with recessed handle above

for carcase height 49.75 cm ATP2050S L/R 20 77 81 83 87 93 97 120

with recessed handle (split front)

for carcase height 66.25 cm ATP2066 L/R 20 83 91 94 97 103 110 134

with recessed handle above
ATP 20 50 S / ATP 20 80 S
for carcase height 79.5 cm ATP2080S L/R 20 93 97 100 104 117 127 159
with recessed handle (split front)

for carcase height 79.5 cm ATP2080SZ2 L/R 20 134 139 143 149 160 171 203
Divided in height 33.0 and 66.25 cm
ATP 20 80 SZ2 with recessed handle
Diagram shows L
Front finish blenders are manufactured with a maximum
20 cm width.

Blenders between units ANB1 L/R 36 38 40 43 50 55 60

1 additional longitudinal edge in
original style
1 door joint connection strip

Possible from 6.5 cm width.

Extra charge for blender width MPST65 38

less than 6.5 cm
Minimum blender width 2 cm
Diagram shows R 1 longitudinal edge smooth,
not in original style

This style form is not recommended.

Please state L/R!

Floor unit corner blender 90° .

Front finish
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width
ATPE 37 / ATPE 66
for carcase height 36.5 cm ATPE37 10 123 129 147 152 165 179 227
with recessed handle above

for carcase height 49.75 cm ATPE50S 10 129 135 154 159 174 189 239
with recessed handle (split front)

ATPE 50 S / ATPE 80 S for carcase height 66.25 cm ATPE66 10 136 149 164 171 186 205 253
with recessed handle above

for carcase height 79.5 cm ATPE80S 10 148 160 175 182 203 221 270
with recessed handle (split front)

for carcase height 79.5 cm ATPE80SZ2 10 209 234 270 293 328 361 465
ATPE 80 SZ2 Divided in height 33.0 and 66.25 cm
with recessed handle

4 Flush with front.

Please state rear length (inside measurement)
from l to r on order.
4

Extra charge AMPTP5 5 11 14 14 17 21 24 35

per 5 cm extra width
(from 10 cm to max. 20 cm)

1/2022 26.21
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Floor unit corner blender .
Front finish
Freely selectable angle and leg
measurement from 3 x 3 cm to
10 x 10 cm width
ATPEW 37 / ATPEW 66

for carcase height 36.5 cm ATPEW37 10 134 150 160 165 181 200 239
with recessed handle above

for carcase height 49.75 cm ATPEW50S 10 143 157 169 174 191 211 251
with recessed handle (split front)
ATPEW 50 S / ATPEW 80 S
for carcase height 66.25 cm ATPEW66 10 155 164 178 185 207 224 275
with recessed handle above

for carcase height 79.5 cm ATPEW80S 10 163 172 188 200 220 237 293
with recessed handle (split front)

ATPEW 80 SZ2 for carcase height 79.5 cm ATPEW80SZ2 10 224 245 282 308 345 378 491
Divided in height 33.0 and 66.25 cm
with recessed handle
3

Flush with front.

3

Please state rear length (inside measurement)

from l to r on order.

Extra charge AMPTP5 5 11 14 14 17 21 24 35

per 5 cm extra width
(from 10 cm to max. 20 cm)

Additional wall fixing ANGSM 18

for blenders

For wall fixing of blenders adjoining dishwashers.

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

Surface style
Support panels with plinth Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm
Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MC H
Support panel with plinth For carcase height 66.25 cm
for blender ATWSP6656 L/R 56 99 99 180 236 257 278 316 244
Thickness 1.6 cm ATWSP6666 L/R 66 107 107 204 267 290 312 354 277
prepared for connection to
floor unit blenders with For carcase height 79.5 cm
recessed handle milling ATWSP8056 L/R 56 110 110 202 266 289 311 354 272
ATWSP8066 L/R 66 119 119 230 303 328 352 399 311
Diagram shows R Only as accessory type for blenders ATP ..,
not available loose!
For use of dishwasher or open niche.
Visible side points towards dishwasher or to the
open niche. Please state type left/right.

Support panel with plinth up to

Thickness 1.6 cm For carcase height 79.5 cm
both sides finished TWS8058 L/R 63 83 83 176 241 265 289 332 242
TWS8068 L/R 70 97 97 192 265 298 331 380 279
Please state required depth.
Please state whether placed L/R and plinth height.
Fit plinth return on site.
Diagram shows R Plinth height 1.5 cm larger for floor adjustment.

26.22 1/2022
 Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Floor unit blender Carcase height 36.5 cm
flush with carcase TSB2037 20 24 34 36 42 48 53 61 46

Carcase height 49.75 cm

TSB2050 20 24 34 36 42 48 53 61 46

Carcase height 66.25 cm

TSB2066 20 30 37 40 50 55 60 70 49

Carcase height 79.5 cm

TSB2080 20 36 40 44 58 63 67 79 53

Surface style
Rear panels Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Height KH KG VM ME FG MC H
Rear panel per metre
type of visible side charge per started 10 cm
Texture direction is vertical RW66 66 167 167 257 271 292 309 306
in variable sizes RW80 80 185 185 295 312 337 358 353
with loose plinth RW93 93 202 202 330 350 379 404 396
Max. length 260 cm (detailed dimension information RW99 99 212 212 349 370 402 428 418
can be found in chapter 71).

Rear panels show matching

front colour on visible side only,
back of rear panel to our choice.
Over depth worktop necessary,
no plinth steps possible.

Length connection per top part

tongue and groove joint VL 23
without pop-up fitting

Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front RWF66 191 217 282 308 341 393 435
in variable sizes
66,0 Height up to 66.0 cm
Max. width 250 cm (detailed dimension information
can be found on page 71.14).
without recessed handle
with loose plinth

With rear panel, it is essential that worktop is over depth.

Minimum charged 0.5 metres.

Rear panel in per metre

front finish charge per started 10 cm
Texture direction as front RWF80 208 229 327 372 414 468 509
in variable sizes
79,25 Height up to 79.25 cm
Max. width 250 cm (detailed dimension information
can be found on page 71.14).
without recessed handle
with loose plinth

With rear panel, it is essential that worktop is over depth.

Minimum charged 0.5 metres.

1/2022 26.23
 Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front RWF93 233 256 366 417 463 524 570
in variable sizes
Height up to 92.5 cm
92,5 Max. width 250 cm (detailed dimension information
can be found on page 71.14).
without recessed handle
with loose plinth

With rear panel, it is essential that worktop is over depth.

Minimum charged 0.5 metres.

Rear panel in RWF3066 30 70 79 103 126 163 196 237

front finish RWF4066 40 74 85 107 132 174 216 246
in fixed front sizes RWF4566 45 81 91 115 136 177 218 251
without recessed handle RWF5066 50 85 95 117 140 184 229 267
66,0 with loose plinth RWF6066 60 93 100 123 157 200 243 292
For carcase height 66.25 cm old RW .. 66

With rear panel, it is essential that worktop is over depth.

Rear panel in RWF3080 30 85 96 119 145 182 222 270

front finish RWF4080 40 91 99 122 152 194 240 286
in fixed front sizes RWF4580 45 96 103 125 159 201 243 292
without recessed handle RWF5080 50 98 105 128 161 213 261 302
with loose plinth RWF6080 60 103 116 136 171 225 280 338
79,25
For carcase height 79.5 cm old RW .. 80

With rear panel, it is essential that worktop is over depth.

Rear panel in RWF3093 30 95 108 133 162 204 249 302

front finish RWF4093 40 102 112 136 171 218 269 321
in fixed front sizes RWF4593 45 108 116 141 178 224 272 327
without recessed handle RWF5093 50 110 118 144 181 239 292 338
with loose plinth RWF6093 60 116 129 153 191 252 314 378
92,5 old RW .. 93
With rear panel, it is essential that worktop is over depth.

Rear panel in ARWF3066 30 163 174 203 231 260 288 314
front finish ARWF4066 40 168 178 212 239 277 310 339
with recessed handle (in 63 cm height) ARWF4566 45 173 186 216 245 282 314 344
and loose plinth ARWF5066 50 178 193 223 255 294 331 359
for carcase height 66.25 cm ARWF6066 60 188 205 230 267 307 351 382
ARWF8066 80 204 219 243 284 330 372 404
X Please state measurement X, min. 4 cm! ARWF9066 90 217 230 260 300 349 397 431
ARWF10066 100 227 242 276 316 367 418 454
With rear panel, it is essential that worktop is over depth. old ARW .. 66

Rear panel in ARWF3080 30 223 238 281 313 363 414 457
front finish ARWF4080 40 230 246 293 326 385 443 486
with recessed handle (in 63 cm height) ARWF4580 45 240 261 297 333 392 451 496
and loose plinth ARWF5080 50 247 270 307 346 407 469 521
for carcase height 79.5 cm ARWF6080 60 263 281 316 356 428 500 549
ARWF8080 80 283 299 339 378 459 538 592
Please state measurement X, min. 4 cm! ARWF9080 90 298 316 354 399 483 570 626
X ARWF10080 100 313 335 371 418 511 600 659
With rear panel, it is essential that worktop is over depth. ARWF12080 120 344 371 403 458 562 663 726
old ARW .. 80

26.24 1/2022
 Price group
Original fronts

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Front part height 13.0 cm AFT030013 30 60 64 77 81 104 125 138
13,0 AFT040013 40 62 68 80 85 110 131 152
Please state intended purpose. AFT045013 45 68 71 81 87 111 133 155
AFT050013 50 69 72 85 91 115 138 162
AFT060013 60 71 74 87 93 120 149 170
AFT080013 80 87 95 109 116 154 188 216
AFT090013 90 97 105 125 132 178 223 247
AFT100013 100 118 131 164 176 232 287 318
AFT120013 120 143 165 204 223 300 377 416

Front part height 26.25 cm AFT030027 30 77 83 102 107 136 169 186
AFT040027 40 79 85 105 115 146 177 203
Please state intended purpose. AFT045027 45 85 93 107 116 148 178 204
26,25
AFT050027 50 87 94 115 119 154 185 215
AFT060027 60 94 98 116 120 160 196 225
AFT080027 80 110 119 136 143 192 242 276
AFT090027 90 121 131 159 165 223 281 312
AFT100027 100 135 160 188 204 274 341 377
AFT120027 120 168 196 240 261 349 436 481

Front part height 33.0 cm AFT030033 30 91 96 117 121 155 184 213
AFT040033 40 95 99 122 127 164 200 229
Please state intended purpose. AFT045033 45 97 102 123 128 166 203 231
AFT050033 50 98 103 128 133 176 218 243
33,0 AFT060033 60 102 109 133 140 185 232 265
AFT080033 80 120 128 162 168 222 277 312
AFT090033 90 129 143 177 184 247 311 352
AFT100033 100 148 170 213 225 298 371 416
AFT120033 120 172 182 217 234 314 397 470

Front part height 62.75 cm AFT030063 30 103 110 134 166 199 232 265
AFT040063 40 105 116 143 172 209 242 279
Please state intended purpose. AFT045063 45 116 121 146 176 213 245 283
AFT050063 50 117 123 154 180 224 267 300
62,75 AFT060063 60 123 129 160 184 233 281 317
AFT080063 80 138 146 172 203 259 314 357
AFT090063 90 168 173 195 226 303 382 434
AFT100063 100 219 223 240 272 386 500 568
AFT120063 120 234 238 254 286 409 535 607

1/2022 26.25
1/2022
Tall units with vertical recessed handles

Carcase height 152,5 cm 30. Chapter

For CARCASE LINE 73 / 86

Carcase height 197,4 cm 31. Chapter

CONTINO | AVANCE
Carcase height 210,65 cm 32. Chapter

Tall units
Carcase height 223,9 cm 33. Chapter 3.

Modular housing units 34. Chapter

Carcase height 145,75 cm 35. Chapter

For CARCASE LINE 80

Carcase height 190,65 cm 36. Chapter

Carcase height 203,9 cm 37. Chapter

Carcase height 217,15 cm 38. Chapter

Modular housing units 39. Chapter

1/2022 3.
 Tall units with vertical recessed handles
Type logic

Article definition Dimension definition Front definition/

function equipment

Tall unit Width / Height / Depth* VZ large capacity pullout

VH 30 204 * VZ
CONTINO | AVANCE

VH 30 204 VZ
* depth only if different from standard 58 cm
Tall units

3.
Housing unit with open niche Width / Height / Niche* Z pullout (1x)

VHGT 60 204 12 Z
VHGT 60 204 12 Z * D double niche
M with lift-up flap (Micro)

Housing unit Width / Height / Niche* Z2 pullout (2x)

with door in front of niche

VHG 60 204 11D Z2

VHG 60 204 11D Z2 * D double niche
M with lift-up flap (Micro)

Article definition Front definition / function equipment

VGF housing unit front for large capacity appliances CA work centre
VH tall unit CAS work centre, sitting height
VHA tall unit top cupboard E continuous front (single piece)
VHAK tall unit top cupboard with flap GS dishwasher
VHAW end tall unit with angled door GVZ pharmacy tall unit
VHEE corner tall unit, inserted H connection to tall unit
VHM modular tall unit HW housekeeping tall unit
HP tall unit blender I interior+
HPE tall unit corner blender IZ interior drawer
HPEW tall unit corner blender 135º KA carat glass front
HSB tall unit shadow blender LM LeMans-shelf
VHVG tall housing unit with slide-away door N niche door
HW tall unit end panel PG programme-glass front
S drawer
VHGM modular housing unit U connection to floor unit
VHG housing unit with open niche VC storage centre
VHGT housing unit with door in front of niche VT storage centre for cooking utensils
VZ large capacity pullout
WM washing machine
Z pullout

3. 1/2022
Vertical recessed handle for tall units

CARCASE LINE 73 CARCASE LINE 86

Tall units with a vertical grip handle are an important part of

modern kitchen planning. Grip handles can be ordered with an
accentuating metal look (413 aluminium) or in matching colour
at extra charge.
Each front colour is given a grip handle in plain colour. Option-
ally, contrasting RAL or NCS colour shades as well as our complete
LEICHT colour spectrum are available.

Ordering type 860.XXX (desired colour number)

Example: 860.120 for the vertical grip handle
in colour 120 white

In addition, vertical grip handles are available in colours

409 gold brass 428 copper 429 bronze
416 bronze dark 405 stainless steel

Prices are according to the price column “lacquered in F”.

2,8
60 3 30 3 70 3

3,5 3,5 3,5

3 3 3

3,5 3,5 3,5

Profile C Profile E Profile L

413 aluminium

Lacquered in F
for connection of for connection with for connection with
tall units slide-away doors side panels

Description Type Width

X
Recessed handle C profile
1 profile
Large capacity 2 cupboard sides reduced
refrigerator for tall units 153 cm GHVC 153 3 129 159
for tall units 197 cm GHVC 197 3 143 179
for tall units 210 cm GHVC 210 3 154 192
for tall units 224 cm GHVC 224 3 183 228
Large capacity refrigerators
for top cupboard tall units 270 cm GHVC 270 3 225 275
When used in combination with large capacity
refrigerators, please order an additional
W2 X side panel. Recessed handle L profile
1 profile
1 cupboard side reduced
for tall units 153 cm GHVL 153 3 95 125
for tall units 197 cm GHVL 197 3 109 144
for tall units 210 cm GHVL 210 3 114 151
for tall units 224 cm GHVL 224 3 135 179
for top cupboard tall units 270 cm GHVL 270 3 162 212

Recessed handle E profile

1 profile
1 cupboard side reduced
for slide-away doors tall units 197 cm GHVE 197 3 143 179
for slide-away doors tall units 210 cm GHVE 210 3 154 192
for slide-away doors tall units 224 cm GHVE 224 3 183 228
for slide-away doors tall units with top cupboard 270 cm GHVE 270 3 225 275

1/2022 3.01
Vertical recessed handle for tall units

CARCASE LINE 80

Tall units with a vertical grip handle are an important part of

modern kitchen planning. Grip handles can be ordered with an
accentuating metal look (413 aluminium) or in matching colour
at extra charge.
Each front colour is given a grip handle in plain colour. Option-
ally, contrasting RAL or NCS colour shades as well as our complete
LEICHT colour spectrum are available.

Ordering type 860.XXX (desired colour number)

Example: 860.120 for the vertical grip handle
in colour 120 white

In addition, vertical grip handles are available in colours

409 gold brass 428 copper 429 bronze
416 bronze dark 405 stainless steel

Prices are according to the price column “lacquered in F”.

2,8
60 3 30 3 70 3

3,5 3,5 3,5

3 3 3

3,5 3,5 3,5

Profile C Profile E Profile L

413 aluminium

Lacquered in F
for connection of for connection with for connection with
tall units slide-away doors side panels

Description Type Width

X
Recessed handle C profile
1 profile
Large capacity 2 cupboard sides reduced
refrigerator for tall units 146 cm GHVC 146 3 129 159
for tall units 190 cm GHVC 190 3 164 203
for tall units 204 cm GHVC 204 3 170 212
for tall units 217 cm GHVC 217 3 183 228
Large capacity refrigerators
for top cupboard tall units 270 cm GHVC 270 3 225 275
When used in combination with large capacity
refrigerators, please order an additional
W2 X side panel. Recessed handle L profile
1 profile
1 cupboard side reduced
for tall units 146 cm GHVL 146 3 95 125
for tall units 190 cm GHVL 190 3 123 162
for tall units 204 cm GHVL 204 3 129 171
for tall units 217 cm GHVL 217 3 135 179
for top cupboard tall units 270 cm GHVL 270 3 162 212

Recessed handle E profile

1 profile
1 cupboard side reduced
for slide-away doors tall units 190 cm GHVE 190 3 164 203
for slide-away doors tall units 204 cm GHVE 204 3 170 212
for slide-away doors tall units 217 cm GHVE 217 3 183 228
for slide-away doors tall units with top cupboard 270 cm GHVE 270 3 225 275

3.02 1/2022
Slide-away doors tall units

Concept The tall unit series with slide-away technology has been de-
signed for kitchens with a homely character. The doors can be
pushed into side pockets and thus allow unhindered access to
the interior of the cupboard.
So as to emphasize the character of the cupboard the interior is
available in almost all surface colours. Interior styles see chapter
11 – surround accessory overview.

Cupboards of the type VHVG ... are available for use with 60 cm
wide appliances such as ovens, microwaves and dishwashers.
These cupboards are exclusively available in planning width
70 cm, with one door and a door pocket on the hinged side.
An appliance switch-off safety box SBOX 230 is included with
the cupboard for connecting heat producing appliances. In
order to avoid overheating and appliance damage, the con-
nected working appliance is switched off on closing the door.
If the appliance is not in use there will be no switch-off so that
the programme settings and time display, if applicable, remain
intact.
Note: For electrical appliances with a larger power input, a cir-
cuit for max. 3 appliances with 220 V, 3.6 KW per appliance or
1 appliance with 400 V, 6 KW is available.
If necessary, plan MP SBOX 400.
Appliance connection exclusively by authorised technician!

Planning The (standard) cupboard always needs a tall unit or a side panel
(W3 or W6) as an adjoining element with which the door pock-
et is formed. W2 not possible!
Double door pockets by planning several slide-away
Connection
Door pocket door cupboards next to each other are not permitted!
to tall unit
Determine hinge sides accordingly. To finish at the room wall
will possibly need a side panel or a filler.
Connection to For connecting to the adjoining element, each slide-away door
a side panel cupboard comes with the necessary fittings.
Front overhang
Carcase width 64,5 cm 12 cm Depth and height protrusions to the adjoining element can only
5,5 be used with the help of a side panel!
Planning width 70 cm The joint appearance is according to the usual dimensions.
Closed doors therefore provide a uniform front.

Door pocket Connection

to tall unit

Connection
to wall
(filler)
Planning width 70 cm

Permitted handles Vertical grip handle 860… (at extra charge)

See pages V3.01-02.

1/2022 3.03
Interior+

CARCASE LINE 80

The Interior+ concept Interior+ is a flexible function space concept for equipping various just appealing in their own right, they relate directly to the car-
cupboard types. The construction basis of the system is a flexibly case interior colour and also reflect the design concept Q-Box.
integrated, 15 cm deep aluminium box frame with matt black Thus we make a successful connection with holistic interior de-
inlays. This new arrangement attractively shapes the carcase inte- sign.
rior of our cupboards in a highly functional and pleasing design.
The attractive mix of material and the pleasant surfaces are not

Function variants With this built-in version, the frame is mounted with dual pin
Swing-out frame fittings, which provide a pivoting system to the full height of a
door cupboard. Thus the cupboard is divided into two vertical
storage levels. A front one, which is directly accessible and is
designed for everyday goods which are arranged on the adjust-
able profile shelves and are safe from tilting. And a rear one
which is accessed only by swinging the frame out and is to be
used for longer term storage space. The rear one, which be-
comes accessible only by swinging the frame out is to be used
as the actual storage space. The frame itself can be accessed
from both sides. Matching container boxes for storing spices,
baking ingredients etc. complete the system.
Interior+ is available as a swing-out frame for tall units of all
heights and in the widths 50 cm and 60 cm.
Wall units with swing-out frame are available in the heights of
66 cm, 80 cm and 93 cm and in the widths of 50 cm , 60 cm
and 100 cm.
All Interior+ tall units can be freely combined with the vertical
grip handle.
The range and further equipment can be found in the relevant
cupboard chapters.

Interior+ container Co-ordinated with Interior+ frame and Interior+ shelf, contain-
ers in several sizes are available for optional arrangements. The
containers are also based on the design concept of Interior+:
two frontal metal frames, as structuring elements, serve as a
connection of side and floor components. They are made of
matt black Compact-MDF. The modular dimensions of the con-
tainers are so designed that the various depths of our pullouts
can be fully utilised and the containers can also be used for
complementing our interior design system Q-Box.

Interior+ The spice jar frame is the smaller version of the large swing-
Spice jar swing-out frame out frame with scaled down fittings for installing in wall units
from 53 cm height and a minimum width of 50 cm. The ideal,
aesthetically pleasing, storage possibility for spice glasses and
sachets, small utensils or even our ceramic jars from the series
Q-Box.
Spice swing-out frames can be ordered as additional equipment
for wall units with opening doors.

3.04 1/2022
Tall units with vertical recessed handles
Tall units, carcase height 152.5 cm

152.5 cm
Tall units
30.

CARCASE LINE 73 CARCASE LINE 86

Tall units 30. 01

Housing units 30. 02-03

Visible carcase sides 30. 04

Blenders 30. 05

Blenders 30. 06

Rear panels 30. 06

1/2022 30.
 Tall units with vertical recessed handles
Tall units, carcase height 152.5 cm
152.5 cm
Tall units

T: Cupboard depth cm

30. Function cupboards Housing units

30.01 T: 36 / 48 / 58 cm 30.02 T: 58 cm
VH 30 153 VHG 60 153 5
VH 45 153
VH 50 153
79,25
VH 60 153

72,75 99,25

30.01 T: 36 / 48 / 58 cm 30.02 T: 58 cm
VH 30 153 IZ4 VHG 60 153 6 S
VH 45 153 IZ4
VH 50 153 IZ4 13,0
79,25
VH 60 153 IZ4

72,75 72,75

30.01 T: 58 cm 30.02 T: 58 cm
VH 30 153 VZ VHG 60 153 6 S2Z2
VH 45 153 VZ
79,25 13,0
13,0
26,25

72,75 33,0

30.01 30.02
VH 30 153 N T: 58 cm
VH 45 153 N VHG 60 153 9 Z2
VH 50 153 N
VH 60 153 N
79,25

26,25
72,75

33,0

30.02 T: 58 cm
VHG 60 153 10D
SZ

13,0

33,0

30.02 T: 58 cm
39,5 VHG 60 153 M6 SZ

13,0

33,0

30.02 T: 58 cm
VHGT 60 153 9 Z2
VHGTI 60 153 9 Z2
92,5
26,25

33,0

30.03 T: 58 cm
VHGT 60 153 10 Z
VHGTI 60 153 10 Z

105,75

46,25

30.03 T: 58 cm
VHGT 60 153 12 IS
VHGTI 60 153 12 IS
79,25

72,75

30.03 T: 58 cm
VHGT 60 153 14
VHGTI 60 153 14
79,25

72,75

30. 1/2022
 Price group
Tall units
Carcase height 152.5 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit Front line 73 cm
1 door strapped together or door VH30153 L/R 30 374 391 439 491 598 704 784 870
4 adjustable shelves VH45153 L/R 45 419 437 483 541 651 760 856 949
79,25 VH50153 L/R 50 435 452 499 553 675 796 889 977
Finishing top necessary, see page 81.04 VH60153 L/R 60 466 484 535 599 726 851 952 1050
and chapter 71.
72,75

Diagram shows L

Tall storage unit Front line 73 cm

1 door strapped together or door VH30153IZ4 L/R 30 974 998 1041 1096 1183 1267 1373 1466
4 inner pullouts VH45153IZ4 L/R 45 989 1009 1054 1109 1207 1304 1405 1496
79,25 VH50153IZ4 L/R 50 1002 1021 1067 1123 1233 1342 1435 1526
Finishing top necessary, see page 81.04 VH60153IZ4 L/R 60 1028 1047 1100 1162 1281 1400 1500 1596
and chapter 71.
72,75

Diagram shows L Exchange wide angle hinge ANIGE 0

through standard hinge, with spacer strip

Storage unit Front line 73 cm

1 large capacity pullout with front panels VH30153VZ 30 892 909 956 1009 1145 1281 1358 1459
5 adjustable wire baskets with glass bottoms VH45153VZ 45 1029 1044 1092 1146 1286 1426 1511 1619
79,25
Max. loading 15 kg per basket.
Finishing top necessary, see page 81.04
72,75 and chapter 71.

VZ-premium equipment MPVZ30P5 110

Frame inside faced in carcase style MPVZ45P5 153
5 adjustable shelves with glass sides

Niche door Front line 73 cm

1 door strapped together or door VH30153N L/R 30 360 372 429 485 542 598 680 750
with attached plinth VH45153N L/R 45 364 395 446 514 576 638 727 800
no rear panel VH50153N L/R 50 367 400 459 523 595 665 751 818
79,25

no floor VH60153N L/R 60 379 416 474 542 622 703 808 885

Fixing sides in matching carcase colour.

72,75

Plinth omitted with AN TU 85.

Finishing top necessary, see page 81.04
Diagram shows L and chapter 71.

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 30.01
 Price group
Housing units
Carcase height 152.5 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit VHG601535 L/R 60 420 440 468 515 584 654 737 799
1 appliance niche 40-45 cm
1 door Modular parts list
3 adjustable shelves VHGM60153
MGN6053
For oven or microwave (built-in MU60100T
99,25 trim kit will be necessary).
Finishing top necessary, see page 81.04
Diagram shows L and chapter 71.

Housing unit VHG601536S L/R 60 482 502 535 588 680 772 871 934
1 appliance niche 58-60 cm
1 drawer Modular parts list
13,0 1 door VHGM60153
2 adjustable shelves MGN6066
MU6086ST
72,75 For ovens.
Finishing top necessary, see page 81.04
Diagram shows L and chapter 71.

Housing unit VHG601536S2Z2 60 783 817 862 931 1058 1185 1353 1432
1 appliance niche 58-60 cm
2 drawers Modular parts list
13,0 2 pullouts VHGM60153
13,0 MGN6066
26,25 For ovens. MU6086S2Z2
33,0
Finishing top necessary, see page 81.04
and chapter 71.

Housing unit VHG601539Z2 60 545 566 598 649 710 769 916 969
1 appliance niche 82-92 cm
2 pullouts Modular parts list
VHGM60153
For double oven or microwave/oven MGN6093
26,25 combination (built-in trim kit will MU6060Z2
33,0
be necessary) or fridge.
Finishing top necessary, see page 81.04
and chapter 71.

Housing unit VHG6015310DSZ 60 517 546 575 621 679 738 857 921
1 appliance double niche 96-104 cm
1 drawer Modular parts list
1 pullout VHGM60153
MGN60106D
13,0 For microwave/oven combination MU6047SZ
33,0 (built-in trim kit will be necessary).
Finishing top necessary, see page 81.04
and chapter 71.

Housing unit VHG60153M6SZ 60 717 747 793 866 966 1070 1211 1305
39,5 1 lift-up door for
appliance niche 33 cm high Modular parts list
and 49 cm wide VHGM60153
1 appliance niche 58-60 cm MGK6040
1 drawer MGN6066
13,0
1 pullout MU6047SZ
33,0
For microwave and oven.
Diagram shows L Finishing top necessary, see page 81.04
and chapter 71.

Housing unit VHGT601539Z2 L/R 60 620 649 706 787 881 972 1164 1247
1 door for appliance niche 88 cm
2 pullouts with integral ventilation
VHGTI601539Z2 L/R 60 620 649 706 787 881 972 1164 1247
92,5 For integrated fridge or freezer.
26,25 Finishing top necessary, see page 81.04 Modular parts list

33,0
and chapter 71. VHGM60153
It is necessary to fit ventilator grille into finishing MGT6093
Diagram shows L top of refrigeration housing. MU6060Z2

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

30.02 1/2022
 Price group
Housing units
Carcase height 152.5 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit VHGT6015310Z L/R 60 502 538 589 655 762 869 967 1049
1 door for appliance niche 103 cm
1 pullout with integral ventilation
VHGTI6015310Z L/R 60 502 538 589 655 762 869 967 1049
For integrated fridge and freezer.
105,75
Finishing top necessary, see page 81.04 Modular parts list

46,25
and chapter 71. VHGM60153
It is necessary to fit ventilator grille into finishing MGT60106
Diagram shows L top of refrigeration housing. MU6047Z

Housing unit Front line 73 cm

1 door strapped together or door VHGT6015312IS L/R 60 442 461 511 570 664 758 805 848
for appliance niche 122-128 cm
79,25 1 inner drawer with integral ventilation
Front line 73 cm
For integrated fridge and freezer. VHGTI6015312IS L/R 60 442 461 511 570 664 758 805 848
72,75 Finishing top necessary, see page 81.04
and chapter 71.
Diagram shows L It is necessary to fit ventilator grille into finishing
top of refrigeration housing.

Housing unit Front line 73 cm

1 door strapped together or door VHGT6015314 L/R 60 393 408 452 499 580 658 702 740
for appliance niche 140 cm
with integral ventilation
79,25
For integrated fridge and freezer. Front line 73 cm
Finishing top necessary, see page 81.04 VHGTI6015314 L/R 60 393 408 452 499 580 658 702 740
72,75 and chapter 71.
It is necessary to fit ventilator grille into finishing Modular parts list
Diagram shows L top of refrigeration housing. VHGM60153
MGT60153

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

1/2022 30.03
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 152.5 cm
Side depth 34 cm FS15334 L/R 34 0 0 100 144 215 268 139
Side depth 46 cm FS15346 L/R 46 0 0 131 189 267 335 176
Side depth 56 cm FS15356 L/R 56 0 0 131 189 267 335 176
Side depth 61 cm FS15361 L/R 61 0 0 151 218 307 386 204
Side depth 66 cm FS15366 L/R 66 0 0 151 218 307 386 204
Side depth 76 cm FS15376 L/R 76 0 0 159 230 327 409 216
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 152.5 cm
Side depth up to 34 cm FSUEL15334 L/R 34 92 92 192 236 307 360 231
Side depth up to 46 cm FSUEL15346 L/R 46 92 92 223 281 359 427 268
Side depth up to 58 cm FSUEL15358 L/R 58 92 92 223 281 359 427 268
Side depth up to 63 cm FSUEL15363 L/R 63 92 92 243 310 399 478 296
Side depth up to 68 cm FSUEL15368 L/R 68 146 146 297 364 453 532 350
Side depth up to 76 cm FSUEL15376 L/R 76 146 146 305 376 473 555 362
Diagram shows R

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

30.04 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 152.5 cm
Front finish HP20153 L/R 20 81 87 95 104 115 124 128 138

Front finish blenders are manufactured with a maximum

20 cm width. Please make up larger dimension blenders
from rear panels in front finish RWF .. .
152,25

Diagram shows L

Tall unit corner blender 90° Carcase height 152.5 cm

Front finish HPE153 10 158 171 186 194 218 237 247 275
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Please note: With use of handles deeper than

152,25 3 cm, the relevant leg length must be at least
7 cm. See sketch.
7 Flush with front.
Please state rear length (inside measurement)
from l to r on order.
7

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 152.5 cm

Front finish HPEW153 10 168 181 199 204 227 248 265 286
Freely selectable angle up to max. 270°
Not available in IOS-C, IOS-M-C
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width
152,25
Flush with front.
3 Please state rear length (inside measurement)
from l to r on order.
3

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided blender .
available for HP.., HPE.. and HPEW..

Division of blender at 86.0 cm height MPPGT86 39

MP PGT 86
MP PGT 73
Division of blender at 72.75 cm height MPPGT73 39
MP PGT 60
MP PGT 47 Division of blender at 59.5 cm height MPPGT60 39

Division of blender at 46.25 cm height MPPGT47 39

Several divisions are possible.

MP PGT 73 Example: 1x HPE 197

1x MP PGT 73
MP PGT 47
1x MP PGT 47

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

1/2022 30.05
 Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 152.5 cm
flush with carcase HSB20153 20 46 49 53 72 77 82 99 67

Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 73 cm
79,25 in variable sizes RWF153 326 355 444 541 709 873 999 1112
Height up to 152.25 cm
Max. width 120 cm Not available in IOS-C, IOS-M-C
72,75 with loose plinth

Minimum charged 0.5 metres.

Rear panel in Front line 73 cm

front finish RWF30153 30 160 173 222 273 345 418 467 527
in fixed front sizes RWF45153 45 175 190 238 295 379 463 525 589
79,25 with loose plinth RWF50153 50 180 196 245 300 394 484 555 617
For carcase height 152.5 cm RWF60153 60 192 215 263 324 432 540 610 677
old RW .. 153
72,75

30.06 1/2022
Tall units with vertical recessed handles
Tall units, carcase height 197.4 cm

CARCASE LINE 73 CARCASE LINE 86

197.4 cm
Tall units
Tall units 31. 01-02

Tall utility units 31. 02-03

31.
Housing units 31. 03-05

Slide-away doors tall units 31. 05

Accessories for slide-away doors cupboards 31. 06

Corner tall units 31. 07

Function tall units 31. 08

Visible carcase sides 31. 09

Blenders 31. 09-10

Blenders 31. 10

Rear panels 31. 11

1/2022 31.
 Tall units with vertical recessed handles
Tall units, carcase height 197.4 cm
T: Cupboard depth cm

Tall units Tall utility units Housing units Slide-away doors cupboards Corner units

31.01 T: 36 / 48 / 58 cm 31.02 T: 58 cm 31.03 T: 58 cm 31.05 T: 68 cm 31.07 T: 58 cm

VH 30 197 VH 45 197 HW VHG 60 197 6 VHVG 70 197 VHEE 115 197 ULM
VH 45 197 VH 50 197 HW 52,75 68 GS VHEE 125 197 ULM
VH 50 197 VH 60 197 HW
197.4 cm

VH 60 197
Tall units

124,15
124,15 124,15 124,15

72,75
72,75 72,75 72,75 72,75

31.01 T: 36 / 48 / 58 cm 31.02 T: 58 / 68 cm 31.03 T: 58 cm 31.05 T: 68 cm 31.07 T: 58 cm

VH 45 197 SZ2 VH 45 197 GA IZ VHG 60 197 6 SZ2 VHVG 70 197 68 VHEE 115 197 HLM
31. VH 50 197 SZ2 VH 50 197 GA IZ 52,75 VHEE 125 197 HLM
VH 60 197 SZ2 VH 60 197 GA IZ
124,15 124,15 124,15
13,0 124,15
13,0
26,25 26,25
72,75
33,0 72,75 33,0 72,75

31.01 T: 36 / 48 / 58 cm 31.03 T: 48 / 58 cm 31.03 T: 58 cm 31.05 T: 68 cm

VH 45 197 SZ2J VH 45 197 SH IS 26,25 VHG 60 197 M6 VHVG 70 197 68
VH 50 197 SZ2J VH 50 197 SH IS 39,5 KZ2 WM
VH 60 197 SZ2J VH 60 197 SH IS
110,9 124,15
13,0 124,15
26,25
26,25 Function cupboards
72,75
46,25 72,75 33,0

31.01 T: 36 / 48 / 58 cm 31.03 T: 58 cm 31.08 T: 58 cm

VH 30 197 IZ4 39,5 VHG 60 197 11D K VH 50 197 VC
VH 45 197 IZ4 VH 60 197 VC
VH 50 197 IZ4
124,15
VH 60 197 IZ4 124,15

72,75 46,25 72,75

31.01 T: 36 / 48 / 58 cm 31.03 T: 58 cm 31.08 T: 58 cm

VH 30 197 GVZE 39,5 VHG 60 197 11D VH 60 197 VT
VH 45 197 GVZE KSZ

124,15
13,0

197,15 33,0 72,75

31.01 31.04 31.08

T: 36 / 48 / 58 cm T: 58 cm VH 30 197 N
VH 30 197 GVZ2 VHG 60 197 11D VH 45 197 N
VH 45 197 GVZ2 39,5
SZ VH 50 197 N
VH 50 197 GVZ2 VH 60 197 N

124,15
124,15 VH 60 197 GVZ2
13,0

72,75
72,75 33,0

31.02 T: 58 cm 31.04 T: 58 cm
VH 30 197 VZ 39,5
VHGT 60 197 12 Z
VH 45 197 VZ VHGTI 60 197 12 Z

124,15
124,15

72,75 33,0

31.04 T: 58 cm
39,5
VHGT 60 197 14
VHGTI 60 197 14

157,4

31.04 T: 58 cm
VHGT 60 197 16 Z
VHGTI 60 197 16 Z

163,9
33,0

31.04 T: 58 cm
26,25 VHGT 60 197 16 K
VHGTI 60 197 16 K

97,65

72,75

31.04 T: 58 cm
VHGT 60 197 18
VHGTI 60 197 18

124,15

72,75

31.05 T: 68 cm
VHG 70 197 68
WM
124,15
72,75

31. 1/2022
 Price group
Tall units
Carcase height 197.4 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit Front line 73 cm
1 door strapped together or door VH30197 L/R 30 431 454 491 527 621 714 792 851
1 fixed shelf VH45197 L/R 45 451 474 531 584 678 771 856 918
5 adjustable shelves VH50197 L/R 50 459 493 549 607 700 795 903 972
VH60197 L/R 60 485 525 580 640 752 862 963 1037
124,15

72,75

Diagram shows L

Tall storage unit Front line 73 cm

1 door VH45197SZ2 L/R 45 819 858 918 990 1133 1290 1386 1497
3 adjustable shelves VH50197SZ2 L/R 50 836 876 934 1011 1157 1317 1418 1530
1 fixed shelf VH60197SZ2 L/R 60 865 914 974 1058 1211 1367 1485 1598
1 drawer
124,15 2 pullouts Example modular parts list
13,0
26,25 VHM45197
MO45125T
33,0
MU4573SZ2
Diagram shows L

Tall storage unit Front line 86 cm

1 door VH45197SZ2J L/R 45 811 851 902 979 1128 1289 1383 1503
3 adjustable shelves VH50197SZ2J L/R 50 825 868 919 1000 1153 1318 1415 1535
1 fixed shelf VH60197SZ2J L/R 60 858 903 958 1043 1207 1368 1484 1607
110,9 1 drawer
13,0 2 pullouts Example modular parts list
26,25 VHM45197
MO45111T
46,25 MU4586SZ2
Diagram shows L

Tall storage unit Front line 73 cm

1 door strapped together or door VH30197IZ4 L/R 30 921 937 1004 1053 1148 1245 1303 1361
2 adjustable shelves VH45197IZ4 L/R 45 925 952 1013 1072 1167 1260 1344 1408
2 inner pullouts VH50197IZ4 L/R 50 932 967 1022 1092 1185 1276 1385 1453
1 fixed shelf VH60197IZ4 L/R 60 955 992 1053 1131 1237 1340 1442 1513
124,15 2 inner pullouts

72,75
Exchange wide angle hinge ANIGE 0
Diagram shows L through standard hinge, with spacer strip

Pharmacy tall unit Front one-piece

1 large capacity pullout with front panel VH30197GVZE 30 771 794 830 868 962 1055 1132 1191
guided on 2 pullouts and VH45197GVZE 45 815 839 896 947 1042 1135 1221 1284
1 drawer
Cupboard width 30, 45 cm:
3 inner drawers
Not available in IOS-C, IOS-M-C, SOLID-C, VALAIS-C
1 fixed shelf

Max. loading 20 kg per pullout / drawer.

197,15 Due to the possible weight load, please include a
recessed handle on both carcase sides.

Pharmacy tall unit Front line 73 cm

1 pullout with pullout and VH30197GVZ2 30 771 794 830 868 962 1055 1132 1191
drawer connection VH45197GVZ2 45 815 839 896 947 1042 1135 1221 1284
1 fixed shelf VH50197GVZ2 50 831 865 922 980 1074 1169 1276 1344
2 inner drawers VH60197GVZ2 60 848 885 940 1001 1113 1224 1324 1398
124,15
1 pullout
1 fixed shelf
1 inner drawer
72,75
Max. loading 20 kg per pullout / drawer.
Due to the possible weight load, please include a
recessed handle on both carcase sides.

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 31.01
 Price group
Tall units
Carcase height 197.4 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit Front line 73 cm
1 large capacity pullout with front panels VH30197VZ 30 865 880 919 977 1121 1229 1306 1365
6 adjustable wire baskets with glass bottoms VH45197VZ 45 981 1006 1045 1098 1246 1365 1451 1514

Max. loading 15 kg per basket.

124,15

72,75
VZ-premium equipment MPVZ30P6 140
Frame inside faced in carcase style MPVZ45P6 196
6 adjustable shelves with glass sides

Price group
Tall utility units
Carcase height 197.4 cm, carcase depth 56 cm

Neutral
Cupboard depth 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Tall utility unit Front line 73 cm
1 door strapped together or door VH45197HW L/R 45 405 432 491 556 641 727 812 878
1 fixed shelf (depth 41.7 cm) VH50197HW L/R 50 414 449 506 580 665 748 857 923
1 adjustable function shelf with railing VH60197HW L/R 60 442 479 540 611 713 817 917 992
(depth 31 cm)
124,15 1 hose holder and 3 clamping hooks
2 adjustable shelves (depth 28 cm)
72,75

Diagram shows L

Package vertical shelf HWV 55

1 centre panel next to hinged side,
on two-door cupboards left
Shelf height 160 cm
Shelf width 18.4 cm
Installed in tall utility unit

Available from cupboard height 190 cm and from

cupboard width 50 cm.
Combination with package waste depot possible.

Package waste depot HWWD 111

1 frame with lid for waste bags
at side opposite hinged side,
on two-door cupboards right
1 cloth bag

Combination with package vertical shelf from cupboard

width 50 cm possible.

Package drinks crates storage HW60GA2 77

2 racks for drinks crates made of steel tubing
for fitting in crockery- or utility unit
on site

When used in the utility unit, function shelf, hose rack

and clamping hook are dispensed with in favour of an
adjustable shelf.

Tall wardrobe unit Front line 73 cm

1 door strapped together or door VH45197GAIZ L/R 45 438 462 520 572 666 759 845 907
1 clothes rail VH50197GAIZ L/R 50 449 483 540 598 692 787 894 963
1 fixed shelf VH60197GAIZ L/R 60 469 508 562 622 735 845 946 1022
1 inner pullout with metal frame
124,15

72,75

Diagram shows L

Shelf above the clothes rail ANGABO 22

1 fixed shelf above the clothes rail

Shelf 27 cm from carcase upper edge.

31.02 1/2022
 Price group
Tall utility units
Carcase height 197.4 cm, carcase depth 56 cm

Neutral
Cupboard depth 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Mirror GASP 40
35 x 100 cm
Mirror adhesive tape for applying to
rear of the door on site

Tall shoe unit Front line 73 cm

1 door strapped together or door VH45197SHIS L/R 45 514 537 596 647 740 833 919 982
4 adjustable shoe racks VH50197SHIS L/R 50 530 565 620 679 773 868 975 1043
2 adjustable shelves VH60197SHIS L/R 60 553 591 646 706 818 929 1030 1104
1 fixed shelf
124,15 1 inner drawer

72,75

Diagram shows L

Price group
Housing units
Carcase height 197.4 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit VHG601976 L/R 60 490 518 566 626 743 853 968 1064
1 door
52,75 1 adjustable shelf Modular parts list
1 appliance niche 57-60 cm VHGM60197
1 door MO6053T
2 adjustable shelves MGN6071
MU6073T
For ovens.
72,75

Diagram shows L

Housing unit VHG601976SZ2 L/R 60 774 817 880 957 1136 1313 1446 1565
1 door
52,75 1 adjustable shelf Modular parts list
1 appliance niche 57-60 cm VHGM60197
1 drawer MO6053T
13,0 2 pullouts MGN6071
26,25 MU6073SZ2
For ovens.
33,0

Diagram shows L

Housing unit VHG60197M6KZ2 60 841 871 935 1031 1164 1298 1508 1614
26,25 1 top hinged door
1 lift-up door for Modular parts list
39,5
appliance niche 33 cm high VHGM60197
and 49 cm wide MO6027K
1 appliance niche 57-60 cm MGK6040
26,25 2 pullouts MGN6071
MU6060Z2
33,0
For microwave and oven.

Housing unit VHG6019711DK L/R 60 466 488 536 585 689 791 904 987
39,5 1 top hinged door
1 adjustable shelf Modular parts list
1 appliance double niche 96-108 cm VHGM60197
1 door MO6040K
1 adjustable shelf MGN60110D
MU6047T
For microwave (built-in trim kit will be necessary)
46,25
and oven.
Diagram shows L

Housing unit VHG6019711DKSZ 60 638 674 722 784 881 977 1147 1237
39,5 1 top hinged door
1 adjustable shelf Modular parts list
1 appliance double niche 96-108 cm VHGM60197
1 drawer MO6040K
1 pullout MGN60110D
13,0 MU6047SZ
For microwave (built-in trim kit will be necessary)
33,0
and oven.

1/2022 31.03
 Price group
Housing units
Carcase height 197.4 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit VHG6019711DSZ L/R 60 609 645 695 760 854 949 1120 1211
1 door
39,5
1 adjustable shelf Modular parts list
1 appliance double niche 96-108 cm VHGM60197
1 drawer MO6040T
1 pullout MGN60110D
13,0 MU6047SZ
For microwave (built-in trim kit will be necessary)
33,0
and oven.
Diagram shows L

Housing unit VHGT6019712Z L/R 60 616 649 726 814 961 1104 1256 1352
39,5
1 door
1 adjustable shelf with integral ventilation
1 door for appliance niche 122 cm VHGTI6019712Z L/R 60 616 649 726 814 961 1104 1256 1352
1 pullout
Modular parts list
124,15 For integrated fridge and freezer. VHGM60197
MO6040T
33,0
MGT60125
Diagram shows L MU6033Z

Housing unit VHGT6019714 L/R 60 493 514 580 649 765 881 978 1044
1 door
39,5
1 adjustable shelf with integral ventilation
1 door for appliance niche 140 cm VHGTI6019714 L/R 60 493 514 580 649 765 881 978 1044

For integrated fridge and freezer. Modular parts list

VHGM60197
MO6040T
157,4
MGT60157
Diagram shows L

Housing unit VHGT6019716Z L/R 60 597 621 685 756 879 1002 1097 1164
1 door for appliance niche 158 cm
1 pullout with integral ventilation
VHGTI6019716Z L/R 60 597 621 685 756 879 1002 1097 1164
For integrated fridge and freezer.
Modular parts list
163,9 VHGM60197
MGT60164
33,0
MU6033Z
Diagram shows L

Housing unit Front line 73 cm

26,25
1 top hinged door VHGT6019716K L/R 60 511 535 597 663 780 896 986 1050
2 doors or 1 door strapped together or
1 door for appliance niche 158 cm with integral ventilation
Front line 73 cm
97,65 For integrated fridge and freezer. VHGTI6019716K L/R 60 511 535 597 663 780 896 986 1050

Modular parts list

72,75
VHGM60197
Diagram shows L MO6027K
MGT60171

Housing unit Front line 73 cm

2 doors or 1 door strapped together or VHGT6019718 L/R 60 491 532 613 713 789 865 955 1028
1 door for appliance niche 178 cm
1 support hinge SSCH with integral ventilation
when the front projects more than 26 cm Front line 73 cm
124,15
from the appliance VHGTI6019718 L/R 60 491 532 613 713 789 865 955 1028

For integrated fridge and freezer. Modular parts list

72,75
VHGM60197
Diagram shows L MGT60197

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

31.04 1/2022
 Price group
Housing units
Carcase height 197.4 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Washing machine housing unit Front line 73 cm
depth 68 cm VHG7019768WM L/R 70 440 477 538 659 735 811 912 985
1 door strapped together or door
Not available in IOS-C, IOS-M-C
1 loose construction shelf
124,15

1 plinth platform

Please state plinth height.

72,75

AN TU 85 and VB not possible due to missing

ventilation!
Diagram shows L Cupboard is supplied unassembled.
For 2 appliances max.

Price group
Slide-away doors tall units
Carcase height 197.4 cm, cupboard depth 68 cm

Neutral
Please note planning instructions on page 3.03!

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Slide-away door housing unit Basic type
1 door strapped together or door Front line 73 cm
with slide-away facility VHVG7019768GS L/R 70 2675 2702 2749 2807 2937 3070 3134 3333
1 or 2 adjustable shelves
(according to appliance niche height) Extra charge interior
124,15
1 fixed shelf MPK/KH/KG 0
1 appliance niche MPFF/PF/VM 402
72,75 1 niche for dishwasher MPFS/ME 589
1 plinth cover in front of dishwasher MPFG 923
Diagram shows L
in carcase interior colour MPH 719
1 safety box SBOX 230
Not available in IOS-C, IOS-M-C
Max. 3 appliance connection of
3.6 kw total.
Always state interior style,
possible colours see chapter 11!

Note cupboard depth 68 cm!

Dishwasher front GFV 60 .. or GFT 60 ..
must be ordered separately from the main list.
Please state appliance model on order!

Slide-away door housing unit Basic type

1 door strapped together or door Front line 73 cm
with slide-away facility VHVG7019768 L/R 70 2760 2784 2833 2891 3032 3172 3238 3444
1 or 2 adjustable shelves
(according to appliance niche height) Extra charge interior
124,15
1 fixed shelf MPK/KH/KG 0
1 appliance niche MPFF/PF/VM 402
72,75 2 inner pullouts MPFS/ME 589
1 safety box SBOX 230 MPFG 923
Diagram shows L
Max. 3 appliance connection of MPH 719
3.6 kw total.
Not available in IOS-C, IOS-M-C
Always state interior style,
possible colours see chapter 11!

Note cupboard depth 68 cm!

Slide-away door washing machine Basic type

housing unit Front line 73 cm
1 door strapped together or door VHVG7019768WM L/R 70 2082 2105 2168 2233 2306 2377 2429 2585
with slide-away facility
1 construction shelf with fixings Extra charge interior
124,15
1 plinth platform MPK/KH/KG 0
Always state interior style, MPFF/PF/VM 402
72,75 possible colours see chapter 11! MPFS/ME 589
MPFG 923
Diagram shows L
Note cupboard depth 68 cm! MPH 719
AN TU 85 and VB not possible due to missing
Not available in IOS-C, IOS-M-C
ventilation!
Please state plinth height and appliance height.
For 2 appliances max.

All heat generating appliances planned behind a closed door must, for safety reasons, be connected to a safety box! The safety box activates on accidental
closing of the door on a working heat generating appliance and switches this off after 90 seconds. A warning signal will sound within this time span.

1/2022 31.05
 Surface style
Accessories for slide-away doors cupboards Descriptions / colours see chapter 11.

Extension components

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME FG MC H
Pullout tray For cupboard width 70 cm
for slide-away doors cupboards HVTAF70 70 302 302 417 481 518 573 501
Extendible with lock
Factory installed above fixed shelf,
for top cupboards above lower shelf
Pullout size: 60 x 50 cm

Tray is installed between cupboard sides.

Please state required colour and surface style.
Max. load 30 kg.
Pullout path 45 cm.

LED-Linear-interior lighting 5 watt

Connected wattage 5 W HV70LE 70 101
1 light with LED-strip
integrated in the top
Light temperature 4000K or variable of
2700 to 6400K with dimmer possible
1 extension cable 4 pole, 200 cm
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

The light can be operated either with the power

supply set S24 4000K or with the dynamic light
control S24 DL .. .
Order optional switch BZS, FZS or HSSC.

Socket insert STE 61

with 3 sockets
For Great Britain
STEGB 76
For France
STEFR 76
For Switzerland
STECH 82
For USA
STEUS 112

Extension of power input MPSBOX400 74

SBOX 230 included in standard delivery
is replaced by SBOX 400 for 3-phase
connection
1 automatic shut-off for the connection of
400 V or 230/240 V electrical appliances
1 door contact switch for controlling
Connection:
a) Input
- 5 pin power cable, 2.5 meter long
(connection to cooker connection box)
- Connecting to three phases
- Fuse protection on site max. 16 A per phase
b) Output
- 5 pin cable with free ends 2.5 m long

Mains voltage 230-240 V or 400 V, 50/60 HZ.

In a 400 V connection, appliances with a power consumption of up to 6000 VA can be connected.
When connecting 230/240 V appliances, a maximum power consumption of 3.6 kw per phase is possible.
Connection only by qualified electrician!
Important information about the connection possibilities can be found in the Internet: www.leicht.com on your
dealer page under „technical info“.

31.06 1/2022
 Price group
Corner tall units
Carcase height 197.4 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Corner tall unit .
with connection to floor or
wall units Front line 73 cm
Planning depth 65 cm Door width 50 cm
Actual space 115 (110 up to 140 cm) VHEE115197ULM L/R 100 1938 1988 2094 2220 2382 2544 2725 2852
124,15 Door width 60 cm
Actual space 125 (120 up to 140 cm) VHEE125197ULM L/R 100 2066 2120 2234 2376 2545 2715 2899 3030
1 door strapped together or door
72,75 1 adjustable shelf
1 fixed shelf
Diagram shows L
4 height adjustable swing-out shelves
Actual space with chromium plated railing
4 rotating shelf cushionings
100
for installation on site
Pl.depth

56
1 fixed adjustment blender
9 Front line 73 cm
Door width including blenders TPEE773 7 0 0 0 0 0 0 0 0
OPEE766 7 0 0 0 0 0 0 0 0
Front line 86 cm
TPEE786 7 0 0 0 0 0 0 0 0
OPEE753 7 0 0 0 0 0 0 0 0
Extra charge per 5 cm additional MPTP5 5 5 7 7 8 11 13 13 14
width (up to max. 20 cm)

It is essential to state blender-height for the

connecting floor and wall unit.
The cupboard has knock down fittings and
can be dismantled for access.

Corner tall unit .

with connection to tall units of the
same height Front line 73 cm
Planning depth 65 cm Door width 50 cm
Actual space 115 (110 up to 126 cm) VHEE115197HLM L/R 100 1930 1979 2066 2171 2303 2436 2580 2680
124,15 Door width 60 cm
Actual space 125 (120 up to 136 cm) VHEE125197HLM L/R 100 2058 2111 2206 2327 2466 2607 2754 2858
1 door strapped together or door
72,75 1 adjustable shelf
1 fixed shelf
Diagram shows L
4 height adjustable swing-out shelves
Actual space with chromium plated railing
4 rotating shelf cushionings
100
for installation on site
Pl.depth

56
1 inner blender with angle blender HPEEW9197 9 0 0 0 0 0 0 0 0
9 adjustable from 4 to 10 cm
Door width
Extra charge per 5 cm additional MPHP5 5 24 26 26 27 34 38 39 42
width (up to max. 20 cm)

The cupboard has knock down fittings and

can be dismantled for access.
Please note: when placing an order, it is imperative
to specify the actual floor measurement, the angle
blender HPEEW 9 .. is adapted at factory.

1/2022 31.07
 Price group
Function tall units
Carcase height 197.4 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Storage-Centre Front line 73 cm
1 door strapped together or door VH50197VC L/R 50 1039 1084 1135 1184 1299 1413 1500 1563
with wide angle hinges VH60197VC L/R 60 1076 1122 1182 1235 1357 1479 1585 1656
1 lattice with 5 hanging baskets
3 hooks (adjustable)
124,15 1 swing out fitment with 4 fixed shelves
and wire surround
2 fixed shelves
72,75
1 stainless steel floor protection
Diagram shows L with textured surface
3 adjustable shelves (depth 17 cm)
1 removable basket

Cookware-Centre Front line 73 cm

1 door strapped together or door VH60197VT L/R 60 931 986 1048 1165 1243 1319 1407 1476
with wide angle hinges
1 vario grid with 4 lid holders
and 1 suspended basket
124,15 3 utility cupboard battens with
9 hooks (adjustable)
2 adjustable shelves (depth 27.2 cm)
72,75 2 fixed shelves (depth 45 cm)
1 inner drawer (depth 40 cm)
Diagram shows L
1 vertical compartment
2 adjustable shelves (depth 34 cm)

Vertical compartment always opposite hinged side.

LED-Linear-interior lighting VT60LE 316

1 light with LED-strip
integrated in the top
1 light with LED-strip
integrated in shelf above
the appliance niche
Light temperature 4000K, neutral white
1 adapter 240 volt 50 HZ, 24 volt,
40 watt
1 distributor for constant 4000K
2 extension cables 4 pole, 200 cm
1 HSSC sensor switch
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

Socket insert STE 61

with 3 sockets
For Great Britain
STEGB 76
For France
STEFR 76
For Switzerland
STECH 82
For USA
STEUS 112

Niche door Front line 73 cm

1 door strapped together or door VH30197N L/R 30 342 374 402 473 533 592 674 751
with attached plinth VH45197N L/R 45 362 390 425 498 574 648 720 798
no rear panel VH50197N L/R 50 368 400 439 528 610 692 772 856
no floor VH60197N L/R 60 384 415 461 557 645 733 835 926
124,15

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
72,75

Diagram shows L

If planned into corner, blender of 15-20 cm is necessary.

Do not plan next to projecting cupboards.

31.08 1/2022
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 197.4 cm
Side depth 34 cm FS19734 L/R 34 0 0 116 166 227 284 150
Side depth 46 cm FS19746 L/R 46 0 0 134 194 300 375 197
Side depth 56 cm FS19756 L/R 56 0 0 134 194 300 375 197
Side depth 61 cm FS19761 L/R 61 0 0 155 223 345 432 228
Side depth 66 cm FS19766 L/R 66 0 0 155 223 345 432 228
Side depth 76 cm FS19776 L/R 76 0 0 163 237 366 457 240
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 197.4 cm
Side depth up to 34 cm FSUEL19734 L/R 34 92 92 208 258 319 376 242
Side depth up to 46 cm FSUEL19746 L/R 46 92 92 226 286 392 467 289
Side depth up to 58 cm FSUEL19758 L/R 58 92 92 226 286 392 467 289
Side depth up to 63 cm FSUEL19763 L/R 63 92 92 247 315 437 524 320
Side depth up to 68 cm FSUEL19768 L/R 68 146 146 301 369 491 578 374
Side depth up to 76 cm FSUEL19776 L/R 76 146 146 309 383 512 603 386
Diagram shows R

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 197.4 cm
Front finish HP20197 L/R 20 82 97 101 109 121 131 133 146

Front finish blenders are manufactured with a maximum

20 cm width. Please make up larger dimension blenders
from rear panels in front finish RWF .. .
Programmes SOLID-C and VALAIS-C in divided
197,15 style (front line 73 cm or 86 cm).

Diagram shows L

Tall unit corner blender 90° Carcase height 197.4 cm

Front finish HPE197 10 176 193 212 225 250 279 286 306
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Please note: With use of handles deeper than

3 cm, the relevant leg length must be at least
197,15 7 cm. See sketch.
Flush with front.
7 Please state rear length (inside measurement)
from l to r on order.
Programmes SOLID-C and VALAIS-C in divided
7

style (front line 73 cm or 86 cm).

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

1/2022 31.09
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit corner blender Carcase height 197.4 cm
Front finish HPEW197 10 180 200 219 227 254 284 288 310
Freely selectable angle up to max. 270°
Not available in IOS-C, IOS-M-C
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width

197,15 Flush with front.

Please state rear length (inside measurement)
3 from l to r on order.
Programmes SOLID-C and VALAIS-C in divided
3

style (front line 73 cm or 86 cm).

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided blender .
available for HP.., HPE.. and HPEW..

Division of blender at 86.0 cm height MPPGT86 39

MP PGT 86
MP PGT 73
Division of blender at 72.75 cm height MPPGT73 39
MP PGT 60
MP PGT 47 Division of blender at 59.5 cm height MPPGT60 39

Division of blender at 46.25 cm height MPPGT47 39

Several divisions are possible.

MP PGT 73 Example: 1x HPE 197

1x MP PGT 73
MP PGT 47
1x MP PGT 47

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.
Neutral

FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 197.4 cm
flush with carcase HSB20197 20 49 51 59 76 83 89 104 70

31.10 1/2022
 Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 73 cm
in variable sizes RWF197 356 408 512 611 757 904 1033 1158
Height up to 197.15 cm
124,15 Not available in IOS-C, IOS-M-C
Max. width 120 cm
with loose plinth
72,75
Minimum charged 0.5 metres.

Rear panel in Front line 73 cm

front finish RWF30197 30 182 201 242 279 354 429 489 553
in fixed front sizes RWF45197 45 192 219 273 321 397 472 539 605
with loose plinth RWF50197 50 196 229 285 340 420 503 575 644
For carcase height 197.4 cm RWF60197 60 209 244 302 364 463 560 633 708
124,15
old RW .. 197

72,75

1/2022 31.11
1/2022
Tall units with vertical recessed handles
Tall units, carcase height 210.65 cm

CARCASE LINE 73 CARCASE LINE 86

Tall units 32. 01-02

Tall utility units 32. 02-03

Housing units 32. 03-05

Appliance fronts for large capacity appliances 32. 06

Slide-away doors tall units 32. 07

210.65 cm
Tall units
Accessories for slide-away doors cupboards 32. 08

Corner tall units 32. 09

32.
Function tall units 32. 10

Visible carcase sides 32. 11

Blenders 32. 11-12

Blenders 32. 13

Rear panels 32. 13

1/2022 32.
 Tall units with vertical recessed handles
Tall units, carcase height 210.65 cm
T: Cupboard depth cm

Tall units Tall utility units Housing units Appliance fronts Corner units

32.01 32.02 32.03 32.06 32.09

T: 36 / 48 / 58 cm T: 58 cm T: 58 cm VGF 46 210 T: 58 cm
VH 30 210 VH 45 210 HW VHG 60 210 4 VGF 61 210 VHEE 115 210 ULM
VH 45 210 VH 50 210 HW VGF 76 210 VHEE 125 210 ULM
VH 50 210 VH 60 210 HW 97,65 VGF 91 210
137,4
VH 60 210 137,4
137,4
137,4

72,75
72,75 72,75 72,75 72,75

32.01 32.02 32.03 32.06 32.09

T: 36 / 48 / 58 cm T: 58 / 68 cm T: 58 cm VGFR 46 210 E T: 58 cm
VH 45 210 SZ2 VH 45 210 GA IZ VHG 60 210 6 VGFR 61 210 E VHEE 115 210 HLM
VH 50 210 SZ2 VH 50 210 GA IZ 66,0 VGFR 76 210 E VHEE 125 210 HLM
VH 60 210 SZ2 VH 60 210 GA IZ
137,4 137,4 137,4
13,0
26,25
210,4
33,0 72,75 72,75 72,75

32.01 32.03 32.03 32.06

210.65 cm

T: 36 / 48 / 58 cm T: 48 / 58 cm T: 58 cm VGF 76 210 Z
Tall units

VH 45 210 SZ2J VH 45 210 SH IS VHG 60 210 6 SZ2 VGF 91 210 Z

VH 50 210 SZ2J VH 50 210 SH IS 66,0
VH 60 210 SZ2J VH 60 210 SH IS
124,15
13,0 137,4
26,25
13,0
26,25
52,1
Function cupboards
77,6
46,25 33,0
32. 72,75

32.01 32.03 32.06 32.10

T: 36 / 48 / 58 cm T: 58 cm VGF 76 210 Z2 T: 58 cm
VH 30 210 IZ4 VHG 60 210 11D VGF 91 210 Z2 VH 50 210 VC
VH 45 210 IZ4 52,75 VH 60 210 VC
VH 50 210 IZ4
137,4
VH 60 210 IZ4 137,4
34,1 / 34,5

42,6
72,75 46,25 72,75

32.01 T: 36 / 48 / 58 cm 32.04 T: 58 cm 32.10 T: 58 cm

VH 30 210 GVZE VHG 60 210 11D VH 60 210 VT
VH 45 210 GVZE 52,75 SZ

137,4
13,0 Slide-away doors cupboards
210,4 33,0 72,75

32.01 32.04 32.07 32.10

T: 36 / 48 / 58 cm T: 58 cm T: 68 cm VH 30 210 N
VH 30 210 GVZ2 VHG 60 210 12D Z VHVG 70 210 VH 45 210 N
VH 45 210 GVZ2 52,75
68 GS VH 50 210 N
VH 50 210 GVZ2 VH 60 210 N
VH 60 210 GVZ2

137,4
137,4 137,4

72,75
72,75
72,75 33,0

32.02 T: 58 cm 32.04 T: 58 cm 32.07 T: 68 cm

VH 30 210 VZ VHGT 60 210 12 Z VHVG 70 210 68
VH 45 210 VZ 52,75 VHGTI 60 210 12 Z

137,4
137,4
124,15
72,75
72,75 33,0

32.04 T: 58 cm 32.07 T: 68 cm
VHGT 60 210 14 VHVG 70 210 68
52,75 VHGTI 60 210 14 WM
137,4

72,75
157,4

32.04 T: 58 cm
26,25
VHGT 60 210 14 Z
VHGTI 60 210 14 Z

150,65

33,0

32.04 T: 58 cm
39,5
VHGT 60 210 16
VHGTI 60 210 16

97,65

72,75

32.05 T: 58 cm
VHGT 60 210 18
VHGTI 60 210 18

137,4

72,75

32.05 T: 68 cm
VHG 70 210 68
WM
137,4
72,75

32. 1/2022
 Price group
Tall units
Carcase height 210.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit Front line 73 cm
1 door strapped together or door VH30210 L/R 30 476 495 531 589 700 812 874 948
1 fixed shelf VH45210 L/R 45 511 531 579 651 764 878 945 1022
6 adjustable shelves VH50210 L/R 50 520 549 596 677 798 918 995 1073
VH60210 L/R 60 542 574 629 718 855 994 1069 1151
137,4

72,75

Diagram shows L

Tall storage unit Front line 73 cm

1 door VH45210SZ2 L/R 45 869 911 976 1081 1247 1425 1521 1643
4 adjustable shelves VH50210SZ2 L/R 50 887 930 995 1105 1272 1456 1558 1680
1 fixed shelf VH60210SZ2 L/R 60 909 960 1029 1144 1322 1502 1624 1747
1 drawer
137,4 2 pullouts Example modular parts list
13,0 VHM50210
26,25 MO50138T
33,0 MU5073SZ2

Diagram shows L

Tall storage unit Front line 86 cm

1 door VH45210SZ2J L/R 45 854 897 953 1029 1174 1333 1433 1554
3 adjustable shelves VH50210SZ2J L/R 50 871 916 972 1051 1201 1362 1467 1590
1 fixed shelf VH60210SZ2J L/R 60 896 944 1005 1090 1247 1405 1528 1652
1 drawer
124,15
13,0
2 pullouts Example modular parts list
26,25 VHM50210
MO50125T
46,25 MU5086SZ2

Diagram shows L

Tall storage unit Front line 73 cm

1 door strapped together or door VH30210IZ4 L/R 30 1000 1026 1066 1129 1227 1329 1387 1463
2 adjustable shelves VH45210IZ4 L/R 45 1006 1038 1083 1155 1261 1366 1433 1509
2 inner pullouts VH50210IZ4 L/R 50 1012 1052 1102 1182 1293 1403 1478 1556
1 fixed shelf VH60210IZ4 L/R 60 1026 1076 1144 1229 1351 1472 1549 1630
137,4
2 inner pullouts

72,75 Exchange wide angle hinge ANIGE 0

through standard hinge, with spacer strip
Diagram shows L

Pharmacy tall unit Front one-piece

1 large capacity pullout with front panel VH30210GVZE 30 785 801 839 896 1008 1120 1180 1254
guided on 2 pullouts and VH45210GVZE 45 828 850 895 969 1083 1196 1263 1338
1 drawer
Cupboard width 30, 45 cm:
3 inner drawers
Not available in IOS-C, IOS-M-C, SOLID-C, VALAIS-C
1 fixed shelf

Max. loading 20 kg per pullout / drawer.

210,4 Due to the possible weight load, please include a
recessed handle on both carcase sides.

Pharmacy tall unit Front line 73 cm

1 pullout with pullout and VH30210GVZ2 30 785 801 839 896 1008 1120 1180 1254
drawer connection VH45210GVZ2 45 828 850 895 969 1083 1196 1263 1338
1 fixed shelf VH50210GVZ2 50 845 876 921 1003 1125 1245 1321 1399
2 inner drawers VH60210GVZ2 60 864 894 951 1038 1178 1316 1391 1473
137,4 1 pullout
1 fixed shelf
1 inner drawer
72,75
Max. loading 20 kg per pullout / drawer.
Due to the possible weight load, please include a
recessed handle on both carcase sides.

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 32.01
 Price group
Tall units
Carcase height 210.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit Front line 73 cm
1 large capacity pullout with front panels VH30210VZ 30 887 922 970 1061 1234 1287 1352 1430
6 adjustable wire baskets with glass bottoms VH45210VZ 45 985 1023 1081 1181 1347 1405 1480 1560

Max. loading 15 kg per basket.

137,4

72,75
VZ-premium equipment MPVZ30P6 140
Frame inside faced in carcase style MPVZ45P6 196
6 adjustable shelves with glass sides

Price group
Tall utility units
Carcase height 210.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Tall utility unit Front line 73 cm
1 door strapped together or door VH45210HW L/R 45 480 505 545 619 726 833 900 974
1 adjustable shelf VH50210HW L/R 50 490 516 565 645 761 876 951 1028
1 fixed shelf (depth 41.7 cm) VH60210HW L/R 60 509 540 595 685 818 948 1022 1105
1 adjustable function shelf with railing
137,4 (depth 31 cm)
1 hose holder and 3 clamping hooks
2 adjustable shelves (depth 28 cm)
72,75

Diagram shows L

Package vertical shelf HWV 55

1 centre panel next to hinged side,
on two-door cupboards left
Shelf height 160 cm
Shelf width 18.4 cm
Installed in tall utility unit

Available from cupboard height 190 cm and from

cupboard width 50 cm.
Combination with package waste depot possible.

Package waste depot HWWD 111

1 frame with lid for waste bags
at side opposite hinged side,
on two-door cupboards right
1 cloth bag

Combination with package vertical shelf from cupboard

width 50 cm possible.

Package drinks crates storage HW60GA2 77

2 racks for drinks crates made of steel tubing
for fitting in crockery- or utility unit
on site

When used in the utility unit, function shelf, hose rack

and clamping hook are dispensed with in favour of an
adjustable shelf.

Tall wardrobe unit Front line 73 cm

1 door strapped together or door VH45210GAIZ L/R 45 445 466 513 586 699 813 880 955
1 clothes rail VH50210GAIZ L/R 50 456 486 533 613 735 855 933 1009
1 fixed shelf VH60210GAIZ L/R 60 477 509 565 652 791 930 1004 1088
1 inner pullout with metal frame
137,4

72,75

Diagram shows L

Shelf above the clothes rail ANGABO 22

1 fixed shelf above the clothes rail

Shelf 27 cm from carcase upper edge.

32.02 1/2022
 Price group
Tall utility units
Carcase height 210.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Mirror GASP 40
35 x 100 cm
Mirror adhesive tape for applying to
rear of the door on site

Tall shoe unit Front line 73 cm

1 door strapped together or door VH45210SHIS L/R 45 520 542 588 662 774 889 955 1032
4 adjustable shoe racks VH50210SHIS L/R 50 537 568 613 695 817 937 1014 1092
2 adjustable shelves VH60210SHIS L/R 60 560 591 648 735 875 1014 1088 1170
1 fixed shelf
137,4 1 inner drawer

72,75

Diagram shows L

Price group
Housing units
Carcase height 210.65 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit VHG602104 L/R 60 574 601 654 724 848 968 1107 1208
1 door
3 adjustable shelves Modular parts list
1 appliance niche 33-43 cm VHGM60210
97,65 1 door MO6098T
2 adjustable shelves MGN6045
MU6073T
For microwaves.
72,75

Diagram shows L

Housing unit VHG602106 L/R 60 533 552 604 668 787 903 1036 1119
1 door
2 adjustable shelves Modular parts list
66,0
1 appliance niche 57-60 cm VHGM60210
1 door MO6066T
2 adjustable shelves MGN6071
MU6073T
For ovens.
72,75

Diagram shows L

Housing unit VHG602106SZ2 L/R 60 817 851 918 999 1180 1363 1514 1620
1 door
2 adjustable shelves Modular parts list
66,0
1 appliance niche 57-60 cm VHGM60210
1 drawer MO6066T
2 pullouts MGN6071
13,0
MU6073SZ2
26,25 For ovens.
33,0

Diagram shows L

Housing unit VHG6021011D L/R 60 460 490 538 592 703 812 907 1009
1 door
52,75 1 adjustable shelf Modular parts list
1 appliance double niche 96-108 cm VHGM60210
1 door MO6053T
1 adjustable shelf MGN60110D
MU6047T
For microwave (built-in trim kit will be necessary)
and oven.
46,25

Diagram shows L

1/2022 32.03
 Price group
Housing units
Carcase height 210.65 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit VHG6021011DSZ L/R 60 632 676 724 791 895 998 1150 1259
1 door
52,75 1 adjustable shelf Modular parts list
1 appliance double niche 96-108 cm VHGM60210
1 drawer MO6053T
1 pullout MGN60110D
MU6047SZ
13,0 For microwave (built-in trim kit will be necessary)
33,0 and oven.

Diagram shows L

Housing unit VHG6021012DZ L/R 60 541 569 613 663 767 869 981 1066
1 door
52,75 1 adjustable shelf Modular parts list
1 appliance double niche 109-122 cm VHGM60210
1 pullout MO6053T
MGN60124D
For microwave (built-in trim kit will be necessary) MU6033Z
and oven.
33,0

Diagram shows L

Housing unit VHGT6021012Z L/R 60 639 680 755 845 1002 1153 1286 1400
1 door
52,75 1 adjustable shelf with integral ventilation
1 door for appliance niche 122 cm VHGTI6021012Z L/R 60 639 680 755 845 1002 1153 1286 1400
1 pullout
Modular parts list
For integrated fridge or freezer. VHGM60210
124,15 MO6053T
33,0 MGT60125
MU6033Z
Diagram shows L

Housing unit VHGT6021014 L/R 60 516 545 609 680 806 930 1008 1092
1 door
52,75 1 adjustable shelf with integral ventilation
1 door for appliance niche 140 cm VHGTI6021014 L/R 60 516 545 609 680 806 930 1008 1092

For integrated fridge and freezer. Modular parts list

VHGM60210
MO6053T
157,4 MGT60157

Diagram shows L

Housing unit VHGT6021014Z L/R 60 643 676 753 841 989 1137 1269 1355
26,25
1 top hinged door
1 door for appliance niche 140 cm with integral ventilation
1 pullout VHGTI6021014Z L/R 60 643 676 753 841 989 1137 1269 1355

For integrated fridge and freezer. Modular parts list

VHGM60210
MO6027K
150,65
MGT60151
33,0 MU6033Z

Diagram shows L

Housing unit Front line 73 cm

1 door VHGT6021016 L/R 60 516 539 607 674 797 919 1020 1088
39,5
1 adjustable shelf
2 doors or 1 door strapped together or with integral ventilation
1 door for appliance niche 158 cm Front line 73 cm
97,65 VHGTI6021016 L/R 60 516 539 607 674 797 919 1020 1088
For integrated fridge and freezer.
Modular parts list
72,75 VHGM60210
MO6040T
Diagram shows L MGT60171

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

32.04 1/2022
 Price group
Housing units
Carcase height 210.65 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit Front line 73 cm
2 doors or 1 door strapped together or VHGT6021018 L/R 60 538 588 676 814 894 975 1067 1147
1 door for appliance niche 178 cm
1 support hinge SSCH with integral ventilation
when the front projects more than 26 cm Front line 73 cm
from the appliance VHGTI6021018 L/R 60 538 588 676 814 894 975 1067 1147
137,4
For integrated fridge and freezer. Modular parts list
VHGM60210
72,75 MGT60210
Diagram shows L

Washing machine housing unit Front line 73 cm

depth 68 cm VHG7021068WM L/R 70 511 564 644 768 855 943 1016 1099
1 door strapped together or door
Not available in IOS-C, IOS-M-C
1 loose construction shelf
1 plinth platform
137,4

Please state plinth height.

AN TU 85 and VB not possible due to missing
72,75

ventilation!
Cupboard is supplied unassembled.
Diagram shows L For 2 appliances max.

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

1/2022 32.05
 Price group
Appliance fronts for large capacity appliances

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Appliance door for large capacity Front line 73 cm
appliance VGF46210 L/R 49 246 287 352 439 530 624 691 810
Hinge drill holes on site VGF61210 L/R 64 281 317 390 508 612 719 817 935
VGF76210 L/R 80 364 398 490 682 822 961 1139 1265
Also available for SUB-ZERO 700 series, VGF91210 L/R 95 465 490 605 885 1063 1241 1512 1644
137,4 Miele and BSH appliances.
Cupboard width 49, 64, 79, 94 cm:
Not available in BOSSA-C
72,75

Cutout for dispenser AUSGT 163

width 23.1 x height 36.8 cm (BSH, Gaggenau)
Not available in IOS-C, IOS-M-C, SOLID-C
or width 23.1 x height 37.5 cm (Miele)

With a plinth higher than 10 cm, the appliance must

be raised on site.

Framed front for large capacity appliance VGFR46210E L/R 49 431 470 533 622 719 812 879 997
Hinge drill holes on site VGFR61210E L/R 64 464 503 574 690 798 906 1005 1124
VGFR76210E L/R 80 549 581 673 866 1007 1148 1327 1451
Also available for the following appliances:
Cupboard width 49, 64, 79 cm:
in widths 46 and 61 cm SUB-ZERO 700 series,
Not available in BOSSA-C, IOS-C, IOS-M-C, SOLID-C, VALAIS-C
Miele and BSH appliances.
In width 76 cm SUB-ZERO 700 series appliances.
With a plinth higher than 10 cm, the appliance must
210,4 be raised on site.

Appliance front for large capacity VGF76210Z L/R 80 379 413 509 708 853 998 1186 1315
appliance (1 door and 1 pullout) VGF91210Z L/R 95 483 509 629 918 1105 1288 1572 1708
Height pullout front according to
Cupboard width 79, 94 cm:
appliance manufacturer
Not available in BOSSA-C
Hinge drill holes on site

52,1

77,6

Appliance front for large capacity VGF76210Z2 L/R 80 387 421 519 724 873 1018 1208 1340
appliance (1 door and 2 pullouts) VGF91210Z2 L/R 95 492 519 641 938 1126 1315 1603 1741
1 inner blender above appliance
Cupboard width 79, 94 cm:
Hinge drill holes on site
Not available in BOSSA-C
Liebherr appliances front heights 42.6 and 34.1 cm.
34,1 / 34,5 SUB-ZERO 700 series appliances heights 42.6 and
34.5 cm.
42,6

Please state appliance manufacturer and appliance type.

Minimum plinth height 10 cm! If necessary, smaller plinth height is also possible, depending on the appliance manufacturer.
Consider depth of appliance when planning side panels etc.
Programme TOCCO-C side with thick edges.

32.06 1/2022
 Price group
Slide-away doors tall units
Carcase height 210.65 cm, cupboard depth 68 cm

Neutral
Please note planning instructions on page 3.03!

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Slide-away door housing unit Basic type
1 door strapped together or door Front line 73 cm
with slide-away facility VHVG7021068GS L/R 70 2734 2757 2805 2864 2994 3129 3191 3395
1 or 2 adjustable shelves
(according to appliance niche height) Extra charge interior
137,4 1 fixed shelf MPK/KH/KG 0
1 appliance niche MPFF/PF/VM 402
1 niche for dishwasher MPFS/ME 589
72,75 1 plinth cover in front of dishwasher MPFG 923
in carcase interior colour MPH 719
Diagram shows L 1 safety box SBOX 230
Not available in IOS-C, IOS-M-C
Max. 3 appliance connection of
3.6 kw total.
Always state interior style,
possible colours see chapter 11!

Note cupboard depth 68 cm!

Dishwasher front GFV 60 .. or GFT 60 ..
must be ordered separately from the main list.
Please state appliance model on order!

Slide-away door housing unit Basic type

1 door strapped together or door Front line 73 cm
with slide-away facility VHVG7021068 L/R 70 2818 2840 2888 2949 3092 3233 3295 3505
1 or 2 adjustable shelves
(according to appliance niche height) Extra charge interior
137,4 1 fixed shelf MPK/KH/KG 0
1 appliance niche MPFF/PF/VM 402
2 inner pullouts MPFS/ME 589
72,75 1 safety box SBOX 230 MPFG 923
Max. 3 appliance connection of MPH 719
Diagram shows L 3.6 kw total.
Not available in IOS-C, IOS-M-C
Always state interior style,
possible colours see chapter 11!

Note cupboard depth 68 cm!

Slide-away door washing machine Basic type

housing unit Front line 73 cm
1 door strapped together or door VHVG7021068WM L/R 70 2160 2188 2248 2312 2385 2460 2506 2667
with slide-away facility
1 construction shelf with fixings Extra charge interior
137,4 1 plinth platform MPK/KH/KG 0
Always state interior style, MPFF/PF/VM 402
possible colours see chapter 11! MPFS/ME 589
72,75 MPFG 923
Note cupboard depth 68 cm! MPH 719
Diagram shows L AN TU 85 and VB not possible due to missing
Not available in IOS-C, IOS-M-C
ventilation!
Please state plinth height and appliance height.
For 2 appliances max.

All heat generating appliances planned behind a closed door must, for safety reasons, be connected to a safety box! The safety box activates on accidental
closing of the door on a working heat generating appliance and switches this off after 90 seconds. A warning signal will sound within this time span.

1/2022 32.07
 Surface style
Accessories for slide-away doors cupboards Descriptions / colours see chapter 11.

Extension components

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME FG MC H
Pullout tray For cupboard width 70 cm
for slide-away doors cupboards HVTAF70 70 302 302 417 481 518 573 501
Extendible with lock
Factory installed above fixed shelf,
for top cupboards above lower shelf
Pullout size: 60 x 50 cm

Tray is installed between cupboard sides.

Please state required colour and surface style.
Max. load 30 kg.
Pullout path 45 cm.

LED-Linear-interior lighting 5 watt

Connected wattage 5 W HV70LE 70 101
1 light with LED-strip
integrated in the top
Light temperature 4000K or variable of
2700 to 6400K with dimmer possible
1 extension cable 4 pole, 200 cm
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

The light can be operated either with the power

supply set S24 4000K or with the dynamic light
control S24 DL .. .
Order optional switch BZS, FZS or HSSC.

Socket insert STE 61

with 3 sockets
For Great Britain
STEGB 76
For France
STEFR 76
For Switzerland
STECH 82
For USA
STEUS 112

Extension of power input MPSBOX400 74

SBOX 230 included in standard delivery
is replaced by SBOX 400 for 3-phase
connection
1 automatic shut-off for the connection of
400 V or 230/240 V electrical appliances
1 door contact switch for controlling
Connection:
a) Input
- 5 pin power cable, 2.5 meter long
(connection to cooker connection box)
- Connecting to three phases
- Fuse protection on site max. 16 A per phase
b) Output
- 5 pin cable with free ends 2.5 m long

Mains voltage 230-240 V or 400 V, 50/60 HZ.

In a 400 V connection, appliances with a power consumption of up to 6000 VA can be connected.
When connecting 230/240 V appliances, a maximum power consumption of 3.6 kw per phase is possible.
Connection only by qualified electrician!
Important information about the connection possibilities can be found in the Internet: www.leicht.com on your
dealer page under „technical info“.

32.08 1/2022
 Price group
Corner tall units
Carcase height 210.65 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Corner tall unit .
with connection to floor or
wall units Front line 73 cm
Planning depth 65 cm Door width 50 cm
Actual space 115 (110 up to 140 cm) VHEE115210ULM L/R 100 2015 2064 2170 2299 2461 2621 2801 2923
Door width 60 cm
137,4 Actual space 125 (120 up to 140 cm) VHEE125210ULM L/R 100 2143 2196 2310 2455 2624 2792 2975 3101
1 door strapped together or door
1 adjustable shelf
72,75
1 fixed shelf
Diagram shows L 4 height adjustable swing-out shelves
with chromium plated railing
Actual space
4 rotating shelf cushionings
100 for installation on site
Pl.depth

56 1 fixed adjustment blender

Front line 73 cm
9
Door width
including blenders TPEE773 7 0 0 0 0 0 0 0 0
OPEE780 7 0 0 0 0 0 0 0 0
Front line 86 cm
TPEE786 7 0 0 0 0 0 0 0 0
OPEE766 7 0 0 0 0 0 0 0 0
Extra charge per 5 cm additional MPTP5 5 5 7 7 8 11 13 13 14
width (up to max. 20 cm)

It is essential to state blender-height for the

connecting floor and wall unit.
The cupboard has knock down fittings and
can be dismantled for access.

Corner tall unit .

with connection to tall units of the
same height Front line 73 cm
Planning depth 65 cm Door width 50 cm
Actual space 115 (110 up to 126 cm) VHEE115210HLM L/R 100 2007 2057 2143 2250 2382 2515 2657 2757
Door width 60 cm
137,4 Actual space 125 (120 up to 136 cm) VHEE125210HLM L/R 100 2135 2189 2283 2406 2545 2686 2831 2935
1 door strapped together or door
1 adjustable shelf
72,75
1 fixed shelf
Diagram shows L 4 height adjustable swing-out shelves
with chromium plated railing
Actual space
4 rotating shelf cushionings
100 for installation on site
Pl.depth

56 1 inner blender with angle blender HPEEW9210 9 0 0 0 0 0 0 0 0

adjustable from 4 to 10 cm
9
Door width
Extra charge per 5 cm additional MPHP5 5 24 26 26 27 34 38 39 42
width (up to max. 20 cm)

The cupboard has knock down fittings and

can be dismantled for access.
Please note: when placing an order, it is imperative
to specify the actual floor measurement, the angle
blender HPEEW 9 .. is adapted at factory.

1/2022 32.09
 Price group
Function tall units
Carcase height 210.65 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Storage-Centre Front line 73 cm
1 door strapped together or door VH50210VC L/R 50 1130 1158 1205 1288 1424 1560 1640 1716
with wide angle hinges VH60210VC L/R 60 1167 1195 1252 1338 1481 1623 1725 1808
1 lattice with 5 hanging baskets
3 hooks (adjustable)
137,4 1 adjustable shelf
1 swing out fitment with 4 fixed shelves
and wire surround
72,75 2 fixed shelves
1 stainless steel floor protection
Diagram shows L with textured surface
3 adjustable shelves (depth 17 cm)
1 removable basket

Cookware-Centre Front line 73 cm

1 door strapped together or door VH60210VT L/R 60 939 998 1072 1192 1274 1355 1429 1507
with wide angle hinges
1 vario grid with 4 lid holders
and 1 suspended basket
3 utility cupboard battens with
137,4
9 hooks (adjustable)
2 adjustable shelves (depth 27.2 cm)
72,75
2 fixed shelves (depth 45 cm)
1 inner drawer (depth 40 cm)
Diagram shows L 1 vertical compartment
2 adjustable shelves (depth 34 cm)

Vertical compartment always opposite hinged side.

LED-Linear-interior lighting VT60LE 316

1 light with LED-strip
integrated in the top
1 light with LED-strip
integrated in shelf above
the appliance niche
Light temperature 4000K, neutral white
1 adapter 240 volt 50 HZ, 24 volt,
40 watt
1 distributor for constant 4000K
2 extension cables 4 pole, 200 cm
1 HSSC sensor switch
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

Socket insert STE 61

with 3 sockets
For Great Britain
STEGB 76
For France
STEFR 76
For Switzerland
STECH 82
For USA
STEUS 112

Niche door Front line 73 cm

1 door strapped together or door VH30210N L/R 30 349 390 410 489 552 616 698 782
with attached plinth VH45210N L/R 45 371 403 435 512 591 671 746 828
no rear panel VH50210N L/R 50 376 417 449 543 630 716 798 889
no floor VH60210N L/R 60 392 431 470 572 664 756 860 959
137,4

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
72,75

Diagram shows L

If planned into corner, blender of 15-20 cm is necessary.

Do not plan next to projecting cupboards.

32.10 1/2022
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 210.65 cm
Side depth 34 cm FS21034 L/R 34 0 0 123 179 242 300 159
Side depth 46 cm FS21046 L/R 46 0 0 146 211 300 377 198
Side depth 56 cm FS21056 L/R 56 0 0 146 211 300 377 198
Side depth 61 cm FS21061 L/R 61 0 0 166 243 346 434 229
Side depth 66 cm FS21066 L/R 66 0 0 166 243 346 434 229
Side depth 76 cm FS21076 L/R 76 0 0 178 257 367 459 242
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 210.65 cm
Side depth up to 34 cm FSUEL21034 L/R 34 92 92 215 271 334 392 251
Side depth up to 46 cm FSUEL21046 L/R 46 92 92 238 303 392 469 290
Side depth up to 58 cm FSUEL21058 L/R 58 92 92 238 303 392 469 290
Side depth up to 63 cm FSUEL21063 L/R 63 92 92 258 335 438 526 321
Side depth up to 68 cm FSUEL21068 L/R 68 146 146 312 389 492 580 375
Side depth up to 76 cm FSUEL21076 L/R 76 146 146 324 403 513 605 388
Diagram shows R

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 210.65 cm
Front finish HP20210 L/R 20 98 109 112 121 136 156 161 174

Front finish blenders are manufactured with a maximum

20 cm width. Please make up larger dimension blenders
from rear panels in front finish RWF .. .
Laminate decors with horizontal texture are made,
starting from a blender height of 210 cm, in divided
210,4
style (front line 73 cm or 86 cm) and depending on
Diagram shows L
the material, at no extra charge.
Programmes SOLID-C and VALAIS-C in divided
style (front line 73 cm or 86 cm).

1/2022 32.11
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit corner blender 90° Carcase height 210.65 cm
Front finish HPE210 10 184 209 219 237 272 302 311 339
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Please note: With use of handles deeper than

3 cm, the relevant leg length must be at least
210,4 7 cm. See sketch.
Flush with front.
7 Please state rear length (inside measurement)
from l to r on order.
Laminate decors with horizontal texture are made,
starting from a blender height of 210 cm, in divided
7

style (front line 73 cm or 86 cm) and depending on

the material, at no extra charge.
Programmes SOLID-C and VALAIS-C in divided
style (front line 73 cm or 86 cm).

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 210.65 cm

Front finish HPEW210 10 199 222 232 248 283 313 324 351
Freely selectable angle up to max. 270°
Not available in IOS-C, IOS-M-C
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width

Flush with front.

210,4
Please state rear length (inside measurement)
from l to r on order.
3
Laminate decors with horizontal texture are made,
starting from a blender height of 210 cm, in divided
3

style (front line 73 cm or 86 cm) and depending on

the material, at no extra charge.
Programmes SOLID-C and VALAIS-C in divided
style (front line 73 cm or 86 cm).

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided blender .
available for HP.., HPE.. and HPEW..

Division of blender at 86.0 cm height MPPGT86 39

MP PGT 86
MP PGT 73
Division of blender at 72.75 cm height MPPGT73 39
MP PGT 60
MP PGT 47 Division of blender at 59.5 cm height MPPGT60 39

Division of blender at 46.25 cm height MPPGT47 39

Several divisions are possible.

MP PGT 73 Example: 1x HPE 197

1x MP PGT 73
MP PGT 47
1x MP PGT 47

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

32.12 1/2022
 Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 210.65 cm
flush with carcase HSB20210 20 53 58 65 86 93 99 117 81

Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 73 cm
in variable sizes RWF210 424 482 570 722 894 1066 1202 1341
Height up to 210.4 cm
137,4 Max. width 120 cm Not available in IOS-C, IOS-M-C
with loose plinth

72,75 Minimum charged 0.5 metres.

Rear panel in Front line 73 cm

front finish RWF30210 30 220 238 276 333 420 510 569 643
in fixed front sizes RWF45210 45 232 259 307 379 467 556 621 698
with loose plinth RWF50210 50 235 271 317 401 498 592 668 746
For carcase height 210.65 cm RWF60210 60 246 291 346 434 547 661 734 818
137,4 old RW .. 210

72,75

1/2022 32.13
1/2022
Tall units with vertical recessed handles
Tall units, carcase height 223.9 cm

CARCASE LINE 73 CARCASE LINE 86

Tall units 33. 01-02

Tall utility units 33. 03

Housing units 33. 04-05

Appliance fronts for large capacity appliances 33. 06

Slide-away doors tall units 33. 07

Accessories for slide-away doors cupboards 33. 08

Corner tall units 33. 09

Function tall units 33. 10

Visible carcase sides 33. 11

Blenders 33. 11-12

223.9 cm
Tall units
Blenders 33. 13

Rear panels 33. 13

33.

1/2022 33.
 Tall units with vertical recessed handles
Tall units, carcase height 223.9 cm
T: Cupboard depth cm

Tall units Tall utility units Housing units Appliance fronts Corner units

33.01 33.03 33.04 33.06 33.09

T: 36 / 48 / 58 cm T: 58 cm T: 58 cm VGF 46 224 T: 58 cm
VH 30 224 VH 45 224 HW VHG 60 224 6 VGF 61 224 VHEE 115 224 ULM
VH 45 224 VH 50 224 HW VGF 76 224 VHEE 125 224 ULM
VH 50 224 VH 60 224 HW 79,25
VGF 91 224
VH 60 224 150,65
150,65 150,65 150,65

72,75
72,75 72,75 72,75 72,75

33.01 33.03 33.04 33.06 33.09

T: 36 / 48 / 58 cm T: 58 / 68 cm T: 58 cm VGFR 46 224 E T: 58 cm
VH 45 224 SZ2 VH 45 224 GA IZ VHG 60 224 M6 Z2 VGFR 61 224 E VHEE 115 224 HLM
VH 50 224 SZ2 VH 50 224 GA IZ 52,75
VGFR 76 224 E VHEE 125 224 HLM
VH 60 224 SZ2 VH 60 224 GA IZ 39,5

150,65 150,65 150,65

13,0
26,25 26,25
223,65
33,0 72,75 33,0 72,75

33.01 33.03 33.04 33.06

T: 36 / 48 / 58 cm T: 48 / 58 cm T: 58 cm VGF 76 224 Z
VH 45 224 SZ2J VH 45 224 SH IS VHG 60 224 11D VGF 91 224 Z
VH 50 224 SZ2J VH 50 224 SH IS 66,0
VH 60 224 SZ2J VH 60 224 SH IS
137,4
150,65
13,0
26,25
52,1
Function cupboards
77,6
46,25 72,75 46,25

33.01 33.04 33.06 33.10

T: 36 / 48 / 58 cm T: 58 cm VGF 76 224 Z2 T: 58 cm
VH 30 224 IZ4 VHGT 60 224 12 Z VGF 91 224 Z2 VH 50 224 VC
VH 45 224 IZ4 66,0 VHGTI 60 224 12 Z VH 60 224 VC
VH 50 224 IZ4
VH 60 224 IZ4
150,65 150,65
34,1 / 34,5
124,15
223.9 cm

42,6
Tall units

72,75 33,0 72,75

33.01 T: 36 / 48 / 58 cm 33.04 T: 58 cm 33.10 T: 58 cm

VH 30 224 GVZE VHGT 60 224 14 VH 60 224 VT
VH 45 224 GVZE 66,0 VHGTI 60 224 14

33.
Slide-away doors cupboards
150,65

223,65 157,4 72,75

33.01 33.04 33.07 33.10

T: 36 / 48 / 58 cm T: 58 cm T: 68 cm VH 30 224 N
VH 30 224 GVZ2 39,5
VHGT 60 224 14 Z VHVG 70 224 VH 45 224 N
VH 45 224 GVZ2 VHGTI 60 224 14 Z 68 GS VH 50 224 N
VH 50 224 GVZ2 VH 60 224 N
VH 60 224 GVZ2

150,65
150,65 150,65

150,65

72,75
72,75
72,75 33,0

33.02 T: 58 cm 33.05 T: 58 cm 33.07 T: 68 cm

VH 30 224 VZZIS VHGT 60 224 16 VHVG 70 224 68
VH 45 224 VZZIS 52,75 VHGTI 60 224 16

150,65
150,65 97,65

72,75
72,75 72,75

33.02 T: 58 cm 33.05 T: 58 cm 33.07 T: 68 cm

VH 30 224 VZZIS2J 39,5 VHGT 60 224 17 K VHVG 70 224 68
VH 45 224 VZZIS2J VHGTI 60 224 17 K WM

137,4 110,9 150,65

72,75
86,0 72,75

33.05 T: 58 cm
26,25
VHGT 60 224 18 K
VHGTI 60 224 18 K

124,15

72,75

33.05 T: 58 cm
VHGT 60 224 18
VHGTI 60 224 18

150,65

72,75

33.05 T: 68 cm
VHG 70 224 68
WM
150,65
72,75

33. 1/2022
 Price group
Tall units
Carcase height 223.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit Front line 73 cm
1 door strapped together or door VH30224 L/R 30 568 588 632 701 834 967 1038 1127
1 fixed shelf VH45224 L/R 45 607 633 688 774 910 1045 1125 1215
6 adjustable shelves VH50224 L/R 50 617 653 708 805 950 1093 1185 1277
VH60224 L/R 60 645 681 749 852 1018 1184 1272 1370

150,65

72,75

Diagram shows L

Tall storage unit Front line 73 cm

1 door VH45224SZ2 L/R 45 913 956 1030 1162 1351 1554 1649 1785
4 adjustable shelves VH50224SZ2 L/R 50 928 974 1045 1185 1377 1585 1686 1821
1 fixed shelf VH60224SZ2 L/R 60 951 1006 1081 1228 1432 1634 1757 1893
1 drawer
2 pullouts Example modular parts list
150,65 VHM60224
13,0
MO60151T
26,25
MU6073SZ2
33,0

Diagram shows L

Tall storage unit Front line 86 cm

1 door VH45224SZ2J L/R 45 897 943 1004 1113 1281 1461 1561 1693
4 adjustable shelves VH50224SZ2J L/R 50 912 960 1023 1135 1306 1491 1597 1730
1 fixed shelf VH60224SZ2J L/R 60 938 988 1058 1174 1356 1538 1665 1799
1 drawer
137,4 2 pullouts Example modular parts list
13,0 VHM60224
26,25 MO60138T
MU6086SZ2
46,25

Diagram shows L

Tall storage unit Front line 73 cm

1 door strapped together or door VH30224IZ4 L/R 30 1191 1220 1269 1343 1463 1581 1650 1740
2 adjustable shelves VH45224IZ4 L/R 45 1197 1237 1288 1374 1500 1625 1705 1796
2 inner pullouts VH50224IZ4 L/R 50 1204 1251 1309 1407 1539 1670 1759 1852
1 fixed shelf VH60224IZ4 L/R 60 1220 1281 1360 1465 1609 1752 1842 1941
2 inner pullouts
150,65

Exchange wide angle hinge ANIGE 0

72,75 through standard hinge, with spacer strip
Diagram shows L

Pharmacy tall unit Front one-piece

1 large capacity pullout with front panel VH30224GVZE 30 934 954 998 1067 1200 1333 1404 1493
guided on 2 pullouts and VH45224GVZE 45 985 1011 1066 1153 1288 1424 1503 1593
1 drawer
Cupboard width 30, 45 cm:
3 inner drawers
Not available in IOS-C, IOS-M-C, SOLID-C, VALAIS-C
1 fixed shelf

Max. loading 20 kg per pullout / drawer.

Due to the possible weight load, please include a
223,65 recessed handle on both carcase sides.

Pharmacy tall unit Front line 73 cm

1 pullout with pullout and VH30224GVZ2 30 934 954 998 1067 1200 1333 1404 1493
drawer connection VH45224GVZ2 45 985 1011 1066 1153 1288 1424 1503 1593
1 fixed shelf VH50224GVZ2 50 1006 1042 1097 1194 1339 1482 1574 1666
2 inner drawers VH60224GVZ2 60 1029 1065 1132 1236 1402 1568 1655 1754
1 pullout
150,65
1 fixed shelf
1 inner drawer
72,75
Max. loading 20 kg per pullout / drawer.
Due to the possible weight load, please include a
recessed handle on both carcase sides.

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 33.01
 Price group
Tall units
Carcase height 223.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit Front line 73 cm
1 large capacity pullout VH30224VZZIS 30 1100 1119 1166 1234 1413 1592 1671 1761
with front panel (top) VH45224VZZIS 45 1212 1241 1294 1381 1560 1738 1824 1917
5 adjustable wire baskets with glass bottoms
1 fixed shelf
1 large capacity pullout with front panel (bottom)
150,65 1 inner drawer
2 loose baskets

72,75 Max. loading 15 kg per basket.

VZ-premium equipment MPVZ30P5 110

Frame inside faced in carcase style MPVZ45P5 153
5 adjustable shelves with glass sides

Storage unit Front line 86 cm

1 large capacity pullout VH30224VZZIS2J 30 1150 1168 1216 1283 1463 1642 1721 1811
with front panel (top) VH45224VZZIS2J 45 1264 1293 1345 1433 1612 1790 1876 1969
4 adjustable wire baskets with glass bottoms
1 fixed shelf
1 large capacity pullout with front panel (bottom)
137,4
2 inner drawers
2 loose baskets

86,0 Max. loading 15 kg per basket.

VZ-premium equipment MPVZ30P4 95

Frame inside faced in carcase style MPVZ45P4 131
4 adjustable shelves with glass sides

33.02 1/2022
 Price group
Tall utility units
Carcase height 223.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 48 cm Cupboard depth 68 cm (extra charge 52 pts)

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Tall utility unit Front line 73 cm
1 door strapped together or door VH45224HW L/R 45 572 599 649 737 864 992 1070 1159
2 adjustable shelves VH50224HW L/R 50 582 615 671 768 907 1042 1131 1222
1 fixed shelf (depth 41.7 cm) VH60224HW L/R 60 605 643 707 815 973 1128 1217 1316
1 adjustable function shelf with railing
(depth 31 cm)
150,65 1 hose holder and 3 clamping hooks
2 adjustable shelves (depth 28 cm)

72,75

Diagram shows L

Package vertical shelf HWV 55

1 centre panel next to hinged side,
on two-door cupboards left
Shelf height 160 cm
Shelf width 18.4 cm
Installed in tall utility unit

Available from cupboard height 190 cm and from

cupboard width 50 cm.
Combination with package waste depot possible.

Package waste depot HWWD 111

1 frame with lid for waste bags
at side opposite hinged side,
on two-door cupboards right
1 cloth bag

Combination with package vertical shelf from cupboard

width 50 cm possible.

Package drinks crates storage HW60GA2 77

2 racks for drinks crates made of steel tubing
for fitting in crockery- or utility unit
on site

When used in the utility unit, function shelf, hose rack

and clamping hook are dispensed with in favour of an
adjustable shelf.

Tall wardrobe unit Front line 73 cm

1 door strapped together or door VH45224GAIZ L/R 45 529 555 610 697 832 968 1047 1137
1 clothes rail VH50224GAIZ L/R 50 543 579 634 731 876 1018 1111 1203
1 fixed shelf VH60224GAIZ L/R 60 569 605 672 776 942 1107 1195 1294
1 inner pullout with metal frame

150,65

72,75

Diagram shows L

Shelf above the clothes rail ANGABO 22

1 fixed shelf above the clothes rail

Shelf 27 cm from carcase upper edge.

Mirror GASP 40
35 x 100 cm
Mirror adhesive tape for applying to
rear of the door on site

Tall shoe unit Front line 73 cm

1 door strapped together or door VH45224SHIS L/R 45 619 646 700 788 922 1058 1137 1227
4 adjustable shoe racks VH50224SHIS L/R 50 640 675 731 827 972 1115 1207 1299
2 adjustable shelves VH60224SHIS L/R 60 668 704 771 876 1041 1207 1295 1394
1 fixed shelf
1 inner drawer
150,65

72,75

Diagram shows L

1/2022 33.03
 Price group
Housing units
Carcase height 223.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit VHG602246 L/R 60 548 570 623 689 812 926 1061 1150
1 door
2 adjustable shelves Modular parts list
79,25 1 appliance niche 57-60 cm VHGM60224
1 door MO6080T
2 adjustable shelves MGN6071
MU6073T
For ovens.

72,75

Diagram shows L

Housing unit VHG60224M6Z2 L/R 60 867 904 972 1071 1220 1368 1570 1698
1 door
52,75 1 adjustable shelf Modular parts list
39,5 1 lift-up door for VHGM60224
appliance niche 33 cm high MO6053T
and 49 cm wide MGK6040
1 appliance niche 57-60 cm MGN6071
2 pullouts MU6060Z2
26,25
33,0 For microwave and oven.
Diagram shows L

Housing unit VHG6022411D L/R 60 501 522 574 632 745 860 973 1062
1 door
2 adjustable shelves Modular parts list
66,0
1 appliance double niche 96-108 cm VHGM60224
1 door MO6066T
1 adjustable shelf MGN60110D
MU6047T
For microwave (built-in trim kit will be necessary)
and oven.
46,25

Diagram shows L

Housing unit VHGT6022412Z L/R 60 680 712 791 885 1044 1201 1352 1453
1 door
2 adjustable shelves with integral ventilation
66,0
1 door for appliance niche 122 cm VHGTI6022412Z L/R 60 680 712 791 885 1044 1201 1352 1453
1 pullout
Modular parts list
For integrated fridge or freezer. VHGM60224
MO6066T
124,15
MGT60125
33,0 MU6033Z
Diagram shows L

Housing unit VHGT6022414 L/R 60 557 577 645 720 848 978 1074 1145
1 door
2 adjustable shelves with integral ventilation
66,0
1 door for appliance niche 140 cm VHGTI6022414 L/R 60 557 577 645 720 848 978 1074 1145

For integrated fridge and freezer. Modular parts list

VHGM60224
MO6066T
MGT60157
157,4

Diagram shows L

Housing unit VHGT6022414Z L/R 60 646 678 761 850 1004 1158 1301 1391
1 door
39,5
1 adjustable shelf with integral ventilation
1 door for appliance niche 140 cm VHGTI6022414Z L/R 60 646 678 761 850 1004 1158 1301 1391
1 pullout
Modular parts list
For integrated fridge and freezer. VHGM60224
MO6040T
150,65
MGT60151
33,0 MU6033Z
Diagram shows L

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

33.04 1/2022
 Price group
Housing units
Carcase height 223.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit Front line 73 cm
1 door VHGT6022416 L/R 60 537 568 634 703 836 966 1048 1134
52,75 1 adjustable shelf
2 doors or 1 door strapped together or with integral ventilation
1 door for appliance niche 158 cm Front line 73 cm
VHGTI6022416 L/R 60 537 568 634 703 836 966 1048 1134
97,65 For integrated fridge and freezer.
Modular parts list
VHGM60224
72,75 MO6053T
MGT60171
Diagram shows L

Housing unit Front line 73 cm

39,5 1 top hinged door VHGT6022417K L/R 60 576 623 715 831 943 1054 1189 1285
1 adjustable shelf
2 doors or 1 door strapped together or with integral ventilation
1 door for appliance niche 178 cm Front line 73 cm
VHGTI6022417K L/R 60 576 623 715 831 943 1054 1189 1285
110,9 For integrated fridge and freezer.
Modular parts list
VHGM60224
72,75 MO6040K
MGT60184
Diagram shows L

Housing unit Front line 73 cm

26,25
1 top hinged door VHGT6022418K L/R 60 574 623 719 837 943 1049 1180 1276
2 doors or 1 door strapped together or
1 door for appliance niche 178 cm with integral ventilation
1 support hinge SSCH Front line 73 cm
when the front projects more than 26 cm VHGTI6022418K L/R 60 574 623 719 837 943 1049 1180 1276
124,15 from the appliance
Modular parts list
For integrated fridge and freezer. VHGM60224
72,75 MO6027K
MGT60197
Diagram shows L

Housing unit Front line 73 cm

2 doors or 1 door strapped together or VHGT6022418 L/R 60 583 644 738 911 998 1084 1176 1264
1 door for appliance niche 178 cm
1 support hinge SSCH with integral ventilation
when the front projects more than 26 cm Front line 73 cm
from the appliance VHGTI6022418 L/R 60 583 644 738 911 998 1084 1176 1264
150,65
For integrated fridge and freezer. Modular parts list
VHGM60224
72,75 MGT60224
Diagram shows L

Washing machine housing unit Front line 73 cm

depth 68 cm VHG7022468WM L/R 70 607 669 766 914 1017 1121 1210 1307
1 door strapped together or door
Not available in IOS-C, IOS-M-C
1 loose construction shelf
1 plinth platform
150,65

Please state plinth height.

AN TU 85 and VB not possible due to missing
ventilation!
72,75

Cupboard is supplied unassembled.

For 2 appliances max.
Diagram shows L

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

1/2022 33.05
 Price group
Appliance fronts for large capacity appliances

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Appliance door for large capacity Front line 73 cm
appliance VGF46224 L/R 49 294 342 417 522 633 742 823 963
1 inner blender above appliance VGF61224 L/R 64 333 377 463 603 728 853 971 1113
Hinge drill holes on site VGF76224 L/R 80 434 472 582 812 977 1143 1356 1504
VGF91224 L/R 95 552 582 720 1053 1264 1476 1800 1955
150,65 Also available for SUB-ZERO 700 series,
Cupboard width 49, 64, 79, 94 cm:
Miele and BSH appliances.
Not available in BOSSA-C

72,75

Cutout for dispenser AUSGT 163

width 23.1 x height 36.8 cm (BSH, Gaggenau)
Not available in IOS-C, IOS-M-C, SOLID-C
or width 23.1 x height 37.5 cm (Miele)

With a plinth higher than 10 cm, the appliance must

be raised on site.

Framed front for large capacity appliance VGFR46224E L/R 49 513 559 634 740 853 967 1046 1187
1 inner blender above appliance VGFR61224E L/R 64 551 597 681 822 950 1076 1194 1336
Hinge drill holes on site VGFR76224E L/R 80 653 692 800 1031 1199 1366 1580 1729
Cupboard width 49, 64, 79 cm:
Also available for the following appliances:
Not available in BOSSA-C, IOS-C, IOS-M-C, SOLID-C, VALAIS-C
in widths 46 and 61 cm SUB-ZERO 700 series,
Miele and BSH appliances.
In width 76 cm SUB-ZERO 700 series appliances.
223,65 With a plinth higher than 10 cm, the appliance must
be raised on site.

Appliance front for large capacity VGF76224Z L/R 80 452 491 605 843 1016 1189 1411 1564
appliance (1 door and 1 pullout) VGF91224Z L/R 95 575 605 748 1094 1315 1533 1872 2033
1 inner blender above appliance
Cupboard width 79, 94 cm:
Height pullout front according to
Not available in BOSSA-C
appliance manufacturer
Hinge drill holes on site
52,1

77,6

Appliance front for large capacity VGF76224Z2 L/R 80 461 501 616 859 1036 1212 1438 1593
appliance (1 door and 2 pullouts) VGF91224Z2 L/R 95 585 616 762 1115 1340 1564 1908 2072
1 inner blender above appliance
Cupboard width 79, 94 cm:
Hinge drill holes on site
Not available in BOSSA-C
Liebherr appliances front heights 42.6 and 34.1 cm.
SUB-ZERO 700 series appliances heights 42.6 and
34,1 / 34,5 34.5 cm.
42,6

Please state appliance manufacturer and appliance type.

Minimum plinth height 10 cm! If necessary, smaller plinth height is also possible, depending on the appliance manufacturer.
Consider depth of appliance when planning side panels etc.
Programme TOCCO-C side with thick edges.

33.06 1/2022
 Price group
Slide-away doors tall units
Carcase height 223.9 cm, cupboard depth 68 cm

Neutral
Please note planning instructions on page 3.03!

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Slide-away door housing unit Basic type
1 door strapped together or door Front line 73 cm
with slide-away facility VHVG7022468GS L/R 70 3227 3260 3316 3386 3542 3700 3773 4016
1 or 2 adjustable shelves
(according to appliance niche height) Extra charge interior
1 fixed shelf MPK/KH/KG 0
150,65 1 appliance niche MPFF/PF/VM 402
1 niche for dishwasher MPFS/ME 589
1 plinth cover in front of dishwasher MPFG 923
72,75
in carcase interior colour MPH 719
1 safety box SBOX 230
Diagram shows L Not available in IOS-C, IOS-M-C
Max. 3 appliance connection of
3.6 kw total.
Always state interior style,
possible colours see chapter 11!

Note cupboard depth 68 cm!

Dishwasher front GFV 60 .. or GFT 60 ..
must be ordered separately from the main list.
Please state appliance model on order!

Slide-away door housing unit Basic type

1 door strapped together or door Front line 73 cm
with slide-away facility VHVG7022468 L/R 70 3325 3354 3410 3481 3651 3820 3895 4143
1 or 2 adjustable shelves
(according to appliance niche height) Extra charge interior
1 fixed shelf MPK/KH/KG 0
150,65
1 appliance niche MPFF/PF/VM 402
2 inner pullouts MPFS/ME 589
1 safety box SBOX 230 MPFG 923
72,75
Max. 3 appliance connection of MPH 719
3.6 kw total.
Diagram shows L Not available in IOS-C, IOS-M-C
Always state interior style,
possible colours see chapter 11!

Note cupboard depth 68 cm!

Slide-away door washing machine Basic type

housing unit Front line 73 cm
1 door strapped together or door VHVG7022468WM L/R 70 2551 2583 2655 2732 2820 2906 2962 3151
with slide-away facility
1 construction shelf with fixings Extra charge interior
1 plinth platform MPK/KH/KG 0
150,65 Always state interior style, MPFF/PF/VM 402
possible colours see chapter 11! MPFS/ME 589
MPFG 923
72,75
Note cupboard depth 68 cm! MPH 719
AN TU 85 and VB not possible due to missing
Diagram shows L Not available in IOS-C, IOS-M-C
ventilation!
Please state plinth height and appliance height.
For 2 appliances max.

All heat generating appliances planned behind a closed door must, for safety reasons, be connected to a safety box! The safety box activates on accidental
closing of the door on a working heat generating appliance and switches this off after 90 seconds. A warning signal will sound within this time span.

1/2022 33.07
 Surface style
Accessories for slide-away doors cupboards Descriptions / colours see chapter 11.

Extension components

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME FG MC H
Pullout tray For cupboard width 70 cm
for slide-away doors cupboards HVTAF70 70 302 302 417 481 518 573 501
Extendible with lock
Factory installed above fixed shelf,
for top cupboards above lower shelf
Pullout size: 60 x 50 cm

Tray is installed between cupboard sides.

Please state required colour and surface style.
Max. load 30 kg.
Pullout path 45 cm.

LED-Linear-interior lighting 5 watt

Connected wattage 5 W HV70LE 70 101
1 light with LED-strip
integrated in the top
Light temperature 4000K or variable of
2700 to 6400K with dimmer possible
1 extension cable 4 pole, 200 cm
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

The light can be operated either with the power

supply set S24 4000K or with the dynamic light
control S24 DL .. .
Order optional switch BZS, FZS or HSSC.

Socket insert STE 61

with 3 sockets
For Great Britain
STEGB 76
For France
STEFR 76
For Switzerland
STECH 82
For USA
STEUS 112

Extension of power input MPSBOX400 74

SBOX 230 included in standard delivery
is replaced by SBOX 400 for 3-phase
connection
1 automatic shut-off for the connection of
400 V or 230/240 V electrical appliances
1 door contact switch for controlling
Connection:
a) Input
- 5 pin power cable, 2.5 meter long
(connection to cooker connection box)
- Connecting to three phases
- Fuse protection on site max. 16 A per phase
b) Output
- 5 pin cable with free ends 2.5 m long

Mains voltage 230-240 V or 400 V, 50/60 HZ.

In a 400 V connection, appliances with a power consumption of up to 6000 VA can be connected.
When connecting 230/240 V appliances, a maximum power consumption of 3.6 kw per phase is possible.
Connection only by qualified electrician!
Important information about the connection possibilities can be found in the Internet: www.leicht.com on your
dealer page under „technical info“.

33.08 1/2022
 Price group
Corner tall units
Carcase height 223.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Corner tall unit .
with connection to floor or
wall units Front line 73 cm
Planning depth 65 cm Door width 50 cm
Actual space 115 (110 up to 140 cm) VHEE115224ULM L/R 100 2399 2457 2582 2738 2928 3119 3335 3480
Door width 60 cm
150,65 Actual space 125 (120 up to 140 cm) VHEE125224ULM L/R 100 2527 2589 2722 2894 3091 3290 3509 3658
1 door strapped together or door
2 adjustable shelves
72,75 1 fixed shelf
4 height adjustable swing-out shelves
Diagram shows L with chromium plated railing
Actual space 4 rotating shelf cushionings
for installation on site
100 1 fixed adjustment blender
Pl.depth

56 Front line 73 cm
9 including blenders TPEE773 7 0 0 0 0 0 0 0 0
Door width OPEE793 7 0 0 0 0 0 0 0 0
Front line 86 cm
TPEE786 7 0 0 0 0 0 0 0 0
OPEE780 7 0 0 0 0 0 0 0 0
Extra charge per 5 cm additional MPTP5 5 5 7 7 8 11 13 13 14
width (up to max. 20 cm)

It is essential to state blender-height for the

connecting floor and wall unit.
The cupboard has knock down fittings and
can be dismantled for access.

Corner tall unit .

with connection to tall units of the
same height Front line 73 cm
Planning depth 65 cm Door width 50 cm
Actual space 115 (110 up to 126 cm) VHEE115224HLM L/R 100 2389 2450 2552 2679 2835 2992 3163 3281
Door width 60 cm
150,65 Actual space 125 (120 up to 136 cm) VHEE125224HLM L/R 100 2517 2582 2692 2835 2998 3163 3337 3459
1 door strapped together or door
2 adjustable shelves
72,75 1 fixed shelf
4 height adjustable swing-out shelves
Diagram shows L with chromium plated railing
Actual space 4 rotating shelf cushionings
for installation on site
100 1 inner blender with angle blender HPEEW9224 9 0 0 0 0 0 0 0 0
Pl.depth

56 adjustable from 4 to 10 cm
9
Door width Extra charge per 5 cm additional MPHP5 5 24 26 26 27 34 38 39 42
width (up to max. 20 cm)

The cupboard has knock down fittings and

can be dismantled for access.
Please note: when placing an order, it is imperative
to specify the actual floor measurement, the angle
blender HPEEW 9 .. is adapted at factory.

1/2022 33.09
 Price group
Function tall units
Carcase height 223.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Storage-Centre Front line 73 cm
1 door strapped together or door VH50224VC L/R 50 1344 1379 1435 1532 1695 1856 1950 2042
with wide angle hinges VH60224VC L/R 60 1390 1424 1492 1592 1764 1933 2054 2154
1 lattice with 5 hanging baskets
3 hooks (adjustable)
1 adjustable shelf
150,65 1 swing out fitment with 4 fixed shelves
and wire surround
2 fixed shelves
72,75 1 stainless steel floor protection
with textured surface
Diagram shows L
3 adjustable shelves (depth 17 cm)
1 removable basket

Cookware-Centre Front line 73 cm

1 door strapped together or door VH60224VT L/R 60 1117 1189 1276 1419 1515 1613 1702 1793
with wide angle hinges
1 vario grid with 4 lid holders
and 1 suspended basket
3 utility cupboard battens with
150,65 9 hooks (adjustable)
2 adjustable shelves (depth 27.2 cm)
2 fixed shelves (depth 45 cm)
72,75 1 inner drawer (depth 40 cm)
1 vertical compartment
Diagram shows L
2 adjustable shelves (depth 34 cm)

Vertical compartment always opposite hinged side.

LED-Linear-interior lighting VT60LE 316

1 light with LED-strip
integrated in the top
1 light with LED-strip
integrated in shelf above
the appliance niche
Light temperature 4000K, neutral white
1 adapter 240 volt 50 HZ, 24 volt,
40 watt
1 distributor for constant 4000K
2 extension cables 4 pole, 200 cm
1 HSSC sensor switch
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

Socket insert STE 61

with 3 sockets
For Great Britain
STEGB 76
For France
STEFR 76
For Switzerland
STECH 82
For USA
STEUS 112

Niche door Front line 73 cm

1 door strapped together or door VH30224N L/R 30 416 463 490 581 658 734 832 932
with attached plinth VH45224N L/R 45 444 480 518 608 704 799 886 987
no rear panel VH50224N L/R 50 450 496 531 648 750 851 951 1058
no floor VH60224N L/R 60 465 514 560 679 791 900 1026 1141
150,65

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
72,75

Diagram shows L

If planned into corner, blender of 15-20 cm is necessary.

Do not plan next to projecting cupboards.

33.10 1/2022
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 223.9 cm
Side depth 34 cm FS22434 L/R 34 0 0 146 213 287 357 188
Side depth 46 cm FS22446 L/R 46 0 0 173 251 357 448 236
Side depth 56 cm FS22456 L/R 56 0 0 173 251 357 448 236
Side depth 61 cm FS22461 L/R 61 0 0 197 289 411 516 272
Side depth 66 cm FS22466 L/R 66 0 0 197 289 411 516 272
Side depth 76 cm FS22476 L/R 76 0 0 211 305 436 546 287
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 223.9 cm
Side depth up to 34 cm FSUEL22434 L/R 34 92 92 238 305 379 449 280
Side depth up to 46 cm FSUEL22446 L/R 46 92 92 265 343 449 540 328
Side depth up to 58 cm FSUEL22458 L/R 58 92 92 265 343 449 540 328
Side depth up to 63 cm FSUEL22463 L/R 63 92 92 289 381 503 608 364
Side depth up to 68 cm FSUEL22468 L/R 68 146 146 343 435 557 662 418
Side depth up to 76 cm FSUEL22476 L/R 76 146 146 357 451 582 692 433
Diagram shows R

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 223.9 cm
Front finish HP20224 L/R 20 115 127 131 143 164 182 189 207

Front finish blenders are manufactured with a maximum

20 cm width. Please make up larger dimension blenders
from rear panels in front finish RWF .. .
Laminate decors with horizontal texture are made,
starting from a blender height of 210 cm, in divided
223,65 style (front line 73 cm or 86 cm) and depending on
the material, at no extra charge.
Diagram shows L Programmes SOLID-C and VALAIS-C in divided
style (front line 73 cm or 86 cm).

1/2022 33.11
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit corner blender 90° Carcase height 223.9 cm
Front finish HPE224 10 221 246 259 283 323 360 370 401
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Please note: With use of handles deeper than

3 cm, the relevant leg length must be at least
7 cm. See sketch.
223,65 Flush with front.
Please state rear length (inside measurement)
7 from l to r on order.
Laminate decors with horizontal texture are made,
starting from a blender height of 210 cm, in divided
7

style (front line 73 cm or 86 cm) and depending on

the material, at no extra charge.
Programmes SOLID-C and VALAIS-C in divided
style (front line 73 cm or 86 cm).

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 223.9 cm

Front finish HPEW224 10 236 263 277 297 336 374 385 416
Freely selectable angle up to max. 270°
Not available in IOS-C, IOS-M-C
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width

Flush with front.

223,65 Please state rear length (inside measurement)
from l to r on order.
3 Laminate decors with horizontal texture are made,
starting from a blender height of 210 cm, in divided
style (front line 73 cm or 86 cm) and depending on
3

the material, at no extra charge.

Programmes SOLID-C and VALAIS-C in divided
style (front line 73 cm or 86 cm).

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided blender .
available for HP.., HPE.. and HPEW..

Division of blender at 86.0 cm height MPPGT86 39

MP PGT 86
MP PGT 73
Division of blender at 72.75 cm height MPPGT73 39
MP PGT 60
MP PGT 47 Division of blender at 59.5 cm height MPPGT60 39

Division of blender at 46.25 cm height MPPGT47 39

Several divisions are possible.

MP PGT 73 Example: 1x HPE 197

1x MP PGT 73
MP PGT 47
1x MP PGT 47

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

33.12 1/2022
 Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 223.9 cm
flush with carcase HSB20224 20 62 68 77 102 110 117 139 96

Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 73 cm
in variable sizes RWF224 505 574 678 857 1064 1269 1430 1596
Height up to 223.65 cm
150,65 Max. width 120 cm Not available in IOS-C, IOS-M-C
with loose plinth

72,75 Minimum charged 0.5 metres.

Rear panel in Front line 73 cm

front finish RWF30224 30 260 284 326 396 501 606 675 765
in fixed front sizes RWF45224 45 277 306 367 452 556 662 739 830
with loose plinth RWF50224 50 280 320 377 476 591 704 795 887
For carcase height 223.9 cm RWF60224 60 294 346 410 517 651 784 874 973
150,65 old RW .. 224

72,75

1/2022 33.13
1/2022
Tall units with vertical recessed handles
Modular tall units / Top cupboards

CARCASE LINE 73 CARCASE LINE 86

Planning tips 34. 01

Basic units for modular housing units - Carcase heights 152.5 / 197.4 / 210.65 / 223.9 cm, carcase depth 56 cm 34. 02

Modules Below - Module height 33 cm 34. 02

Modules Below - Module height 47 cm 34. 02

Modules Below - Module height 60 cm 34. 03

Modules Below - Module height 73 cm 34. 03-04

Modules Below - Module height 86 cm 34. 04-05

Modules Below - Module height 100 cm 34. 06

Modules Below - Module height 113 cm 34. 06

Modules Appliance niche (open) - for carcase height 152.5 cm 34. 07

Modules Appliance niche (open) - for carcase heights 197.4 / 210.65 / 223.9 cm 34. 07

Modules Appliance double niche (open) - for carcase height 152.5 cm 34. 08

Modules Appliance double niche (open) - for carcase heights 197.4 / 210.65 / 223.9 cm 34. 08

Modular tall units /

Modules Appliance niche with lift-up door 34. 08

Top cupboards
Modules Appliance niche with door - only as Module below 34. 09-10

Modules Appliance niche with door - not as Module below 34. 11

Modules Appliance niche with door - Processing / Accessories 34. 12

34.
Modules Above - Modules heights 27, 40, 53, 66, 80 and 93 cm 34. 13

Basic units for modular tall units - Carcase heights 152.5 / 197.4 / 210.65 / 223.9 cm, carcase depth 56 cm 34. 14

Modules Below - Module height 73 cm 34. 15

Modules Below - Module height 86 cm 34. 16-17

Modules Above 34. 17-18

Tall unit top cupboards - Carcase height 26.5 / 39.75 / 53.0 / 66.25 / 79.5 / 92.75 cm, carcase depth 56 cm 34. 19

Blenders 34. 20-21

Blenders 34. 21

1/2022 34.
 Tall units with vertical recessed handles
Modular tall units / Top cupboards
T: Cupboard depth cm
H: Cupboard height cm

Basic units Modules Below Modules Appliance niche Modules Above

34.02 T: 58 cm 34.02 - 34.06 34.07 34.13

MU 60 ... MGN ... MO 60 ...
H: 153 cm
VHGM 60 153
VHGM 76 153
H: 197 cm
VHGM 60 197
VHGM 76 197
H: 210 cm
VHGM 60 210 34.08
VHGM 76 210 MGN 60 ... D
MGN 76 ... D
H: 224 cm
VHGM 60 224
VHGM 76 224

34.08 MGK ...

34.09 - 34.12
MGT ...

Modular tall units Modules Below Modules Above

Modular tall units /

34.14 T: 36 / 48 / 58 cm 34.15 - 34.17 34.17 - 34.18

Top cupboards

H: 153 cm
MU 30 ... MO 30 ...
VHM 30 153 MU 45 ... MO 45 ...
VHM 45 153
VHM 50 153 MU 50 ... MO 50 ...
VHM 60 153 MU 60 ... MO 60 ...

34.14 T: 36 / 48 / 58 cm
34. H: 197 cm
VHM 30 197
VHM 45 197
VHM 50 197
VHM 60 197

34.14 T: 36 / 48 / 58 cm
H: 210 cm
VHM 30 210
VHM 45 210
VHM 50 210
VHM 60 210

34.14 T: 36 / 48 / 58 cm
H: 224 cm
VHM 30 224
VHM 45 224
VHM 50 224
VHM 60 224

Tall unit top cupboards

34.19 T: 36 / 48 / 58 cm 34.19 T: 36 / 48 / 58 cm 34.19 T: 36 / 48 / 58 cm 34.19 T: 36 / 48 / 58 cm

VHAK 30 27 VHA 30 40 VHA 30 53 VHA 30 80
VHAK 45 27 VHA 45 40 VHA 45 53 VHA 45 80
VHAK 50 27 VHA 50 40 VHA 50 53 VHA 50 80
VHAK 60 27 VHA 60 40 VHA 60 53 VHA 60 80
VHAK 70 27 VHA 70 53 VHA 70 80
VHAK 76 27 VHA 76 53 VHA 76 80
VHAK 80 27
VHAK 91 27
34.19 T: 36 / 48 / 58 cm 34.19 T: 36 / 48 / 58 cm 34.19 T: 36 / 48 / 58 cm
VHAK 30 40 VHA 30 66 VHA 30 93
VHAK 45 40 VHA 45 66 VHA 45 93
VHAK 50 40 VHA 50 66 VHA 50 93
VHAK 60 40 VHA 60 66 VHA 60 93
VHAK 70 40 VHA 70 66 VHA 70 93
VHAK 76 40 VHA 76 66 VHA 76 93
VHAK 80 40
VHAK 91 40

34. 1/2022
Modular Tall Units - Planning tips

CARCASE LINE 73 CARCASE LINE 86

1. Choice of basic cupboard The basic cupboard is the building block in kitchen planning and is • Modular housing units are available with 60 cm and 76 cm width
described by planning measurements (height, width and depth). In
addition to the modular housing units for appliances there is, with Relevant to the use, the basic cupboard will be stocked with modules:
the extended range of modules, the possibility of planning pure tall
units in various cupboard widths.
• All tall unit heights are available
• For modular tall units cupboard widths 30, 45, 50 and
60 cm are available

Examples: Examples:

Modular housing units Modular Tall Units

VHGM 60 XXX (XXX = cupboard height) VHM 30 XXX
VHM 45 XXX
Appliance position below / middle / above VHM 50 XXX
VHM 60 XXX (XXX = cupboard height)
MO 60 40

MO 60 40

MO 60 40

MO 60 40

MO 60 40

MO 60 40
MO 60 53 ...

MO 60 53 ...

MO ... 53 T
MGN 60 45

MGN 60 45
MGN 60 71

MGN 60 71
ie. 210 cm

ie. 210 cm

MO ... 138 T

MO ... 138 T
MGN 60 98

MGN 60 98

MO ... 85 T
MGT 60 151

MGT 60 151
MGT 60 93

MGT 60 93
MGT 60 157

MGT 60 157
MU 60 73 ...

MU 60 73 ...
MU 60 60 ...

MU 60 60 ...

MU ... 73 ST

MU ... 73 ST
MGT 60 99

MGT 60 99

MU ... 73 SZ2
MU MU
60 33 Z 60 33 Z

0 cm 60 cm
0/6 50 /
60 cm 60 cm 45/5 45 /
30 / 3 0 /

Summary of the modules = height of basic cupboard

(e.g. 210 cm). Permitted deviation +/- 2 cm because of the rounded module-planning dimensions.

2. Selecting the modules • Determining height and furnishing of the lower mod- The difference between module-planning dimension MGN.. and the
ule MU… or MGT… Considerations are the ergonomically respectively necessary appliance niche, is adjusted with front blend-
desired position of the appliance (module height) and the line lay- ers for frame programmes. All other programmes in 2-dimensional
out of the adjoining cupboards (front divisions). design have a dimensionally adjusted upper front (MO…) with front
• Appliance niche. For the respective appliance type and coloured thick-edge end adjacent the appliance.
its necessary niche, the appropriate module with door When using 2 appliances, add the thickness of 2 cm for a middle
MGT… or without door MGN… is selected. shelf according to the construction of the overall niche height. With
• Choice of the upper module MO…. The upper mod- appliances that can be stacked or when using bearing rails GUWIN
ule is determined from the rest by the dimensions of the the 2 cm addition is not necessary.
various module heights.
The following applies for planning programmes: based on the cal-
culated remainder of the measurement, the next smaller module
MO ... must be selected!

All basic cupboards and module variants can be found on the fol-
lowing pages. For further examples of modular configurations, see
standard tall units, chapter 30 to 33.

1/2022 34.01
 Price group
Basic units for modular housing units
Carcase heights 152.5 / 197.4 / 210.65 / 223.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Basic unit Carcase height 152.5 cm
for furnishing with modules VHGM60153 60 239 239 239 239 239 239 239 239
MU ..., MGN ..., MGK ..., VHGM76153 76 395 395 395 395 395 395 395 395
MGT ... and MO ...
Carcase height 197.4 cm
Width alterations of between 60 cm up to 76 cm are VHGM60197 60 268 268 268 268 268 268 268 268
charged with the price VHGM 76 .. . VHGM76197 76 424 424 424 424 424 424 424 424

Carcase height 210.65 cm

VHGM60210 60 277 277 277 277 277 277 277 277
VHGM76210 76 433 433 433 433 433 433 433 433

Carcase height 223.9 cm

VHGM60224 60 284 284 284 284 284 284 284 284
VHGM76224 76 440 440 440 440 440 440 440 440

Price group
Modules Below
Module height 33 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 33 MU6033Z 60 152 160 176 192 227 261 307 332
module height 33 cm MU7633Z 76 152 160 176 192 227 261 307 332
33,0
1 pullout

Price group
Modules Below
Module height 47 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 47 MU6047T L/R 60 71 81 101 121 163 204 233 275
module height 47 cm MU7647T L/R 76 71 81 101 121 163 204 233 275
46,25

1 door
Cupboard width 76 cm:
1 adjustable shelf
Not available in IOS-C, IOS-M-C
Diagram shows L

Module Below 47 MU6047Z 60 145 159 175 195 238 281 308 347
module height 47 cm MU7647Z 76 145 159 175 195 238 281 308 347
46,25
1 pullout

Module Below 47 MU6047SZ 60 243 267 287 320 355 390 476 525
13,0 module height 47 cm MU7647SZ 76 243 267 287 320 355 390 476 525
33,0 1 drawer
1 pullout

34.02 1/2022
 Price group
Modules Below
Module height 60 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 60 MU6060T L/R 60 101 108 127 152 194 239 286 316
module height 60 cm MU7660T L/R 76 101 108 127 152 194 239 286 316
1 door
59,5

Cupboard width 76 cm:

2 adjustable shelves
Not available in IOS-C, IOS-M-C
Diagram shows L

Module Below 60 MU6060Z 60 176 181 201 227 273 314 362 393
module height 60 cm MU7660Z 76 176 181 201 227 273 314 362 393
59,5 1 pullout

Module Below 60 MU6060ZIZ 60 302 307 327 353 398 444 492 521
module height 60 cm MU7660ZIZ 76 302 307 327 353 398 444 492 521
59,5 1 pullout
1 inner pullout

Module Below 60 MU6060SZ 60 246 265 287 324 359 396 505 543
13,0 module height 60 cm MU7660SZ 76 246 265 287 324 359 396 505 543
46,25
1 drawer
1 pullout

Module Below 60 MU6060S2Z 60 368 391 421 466 576 683 750 814
13,0 module height 60 cm MU7660S2Z 76 368 391 421 466 576 683 750 814
13,0 2 drawers
33,0 1 pullout

Module Below 60 MU6060Z2 60 271 287 310 348 386 421 535 573
26,25
module height 60 cm MU7660Z2 76 271 287 310 348 386 421 535 573
2 pullouts
33,0

Price group
Modules Below
Module height 73 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 73 MU6073T L/R 60 110 118 138 164 212 254 303 339
module height 73 cm MU7673T L/R 76 110 118 138 164 212 254 303 339
1 door
Cupboard width 76 cm:
73

2 adjustable shelves
Not available in IOS-C, IOS-M-C

Diagram shows L

Module Below 73 MU6073Z 60 183 192 216 239 287 335 382 414
module height 73 cm MU7673Z 76 183 192 216 239 287 335 382 414
1 pullout
73

Module Below 73 MU6073ZIZ 60 310 320 342 364 415 463 511 542
module height 73 cm MU7673ZIZ 76 310 320 342 364 415 463 511 542
1 pullout
73

1 inner pullout

Module Below 73 MU6073ST L/R 60 199 213 238 279 344 408 466 505
module height 73 cm MU7673ST L/R 76 199 213 238 279 344 408 466 505
13

1 drawer
Cupboard width 76 cm:
1 door
60

Not available in IOS-C, IOS-M-C

2 adjustable shelves
Diagram shows L

Module Below 73 MU6073SZ 60 276 286 313 352 418 484 545 582
module height 73 cm MU7673SZ 76 276 286 313 352 418 484 545 582
13

1 drawer
60

1 pullout

1/2022 34.03
 Price group
Modules Below
Module height 73 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 73 MU6073SZIZ 60 400 413 440 477 547 615 673 710
module height 73 cm MU7673SZIZ 76 400 413 440 477 547 615 673 710
13

1 drawer
1 pullout
60

1 inner pullout

Module Below 73 MU6073S2Z 60 348 369 401 449 531 616 687 696
module height 73 cm MU7673S2Z 76 348 369 401 449 531 616 687 696
13 13

2 drawers
1 pullout
47

Module Below 73 MU6073Z2X 60 280 291 320 357 450 540 622 671
module height 73 cm MU7673Z2X 76 280 291 320 357 450 540 622 671
27

2 pullouts
Front heights:
47

above 26.25 cm, below 46.25 cm

Module Below 73 MU6073SZ2 60 394 417 452 495 605 714 781 840
module height 73 cm MU7673SZ2 76 394 417 452 495 605 714 781 840
27 13

1 drawer
2 pullouts
33

Module Below 73 MU6073Z2 60 280 291 320 357 450 540 622 671
module height 73 cm MU7673Z2 76 280 291 320 357 450 540 622 671
40

2 pullouts
Front heights:
33

above 39.5 cm, below 33.0 cm

Price group
Modules Below
Module height 86 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 86 MU6086T L/R 60 128 139 164 193 249 302 359 400
module height 86 cm MU7686T L/R 76 128 139 164 193 249 302 359 400
1 door
Cupboard width 76 cm:
86,0

2 adjustable shelves
Not available in IOS-C, IOS-M-C

Diagram shows L

Module Below 86 MU6086Z 60 194 204 225 252 304 354 399 435
module height 86 cm MU7686Z 76 194 204 225 252 304 354 399 435
1 pullout

86,0

Module Below 86 MU6086ZIZ 60 318 329 354 377 431 481 528 564
module height 86 cm MU7686ZIZ 76 318 329 354 377 431 481 528 564
1 pullout
1 inner pullout

86,0

Module Below 86 MU6086ST L/R 60 208 223 247 287 356 424 490 538
module height 86 cm MU7686ST L/R 76 208 223 247 287 356 424 490 538
13

1 drawer
Cupboard width 76 cm:
1 door
Not available in IOS-C, IOS-M-C
73

2 adjustable shelves

Diagram shows L

Module Below 86 MU6086SZ 60 278 291 316 356 425 493 558 607
module height 86 cm MU7686SZ 76 278 291 316 356 425 493 558 607
13

1 drawer
1 pullout
73

34.04 1/2022
 Price group
Modules Below
Module height 86 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 86 MU6086SZIZ 60 448 468 509 570 670 770 886 960
module height 86 cm MU7686SZIZ 76 448 468 509 570 670 770 886 960
13

1 drawer
1 pullout
73

1 inner pullout

Module Below 86 MU6086SZ2 60 416 438 474 518 632 743 815 885
13,0
module height 86 cm MU7686SZ2 76 416 438 474 518 632 743 815 885
26,25 1 drawer
2 pullouts
46,25

Module Below 86 MU6086S2Z 60 368 392 424 472 558 644 722 744
module height 86 cm MU7686S2Z 76 368 392 424 472 558 644 722 744
13 13

2 drawers
1 pullout
60

Module Below 86 MU6086S2Z2 60 509 538 574 630 734 837 972 1036
module height 86 cm MU7686S2Z2 76 509 538 574 630 734 837 972 1036
27 13 13

2 drawers
2 pullouts
33

Module Below 86 MU6086Z3 60 400 424 461 509 600 693 827 878
module height 86 cm MU7686Z3 76 400 424 461 509 600 693 827 878
26,25
3 pullouts
26,25

33,0

Module Below 86 MU6086Z2X 60 286 299 330 372 470 569 653 706
module height 86 cm MU7686Z2X 76 286 299 330 372 470 569 653 706
26,25 2 pullouts
Front heights:
above 26.25 cm, below 59.5 cm
59,5

Module Below 86 MU6086Z2 60 286 299 330 372 470 569 653 706
module height 86 cm MU7686Z2 76 286 299 330 372 470 569 653 706
39,5 2 pullouts
Front heights:
above 39.5 cm, below 46.25 cm
46,25

1/2022 34.05
 Price group
Modules Below
Module height 100 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 100 MU60100T L/R 60 146 161 180 214 260 306 356 403
module height 100 cm MU76100T L/R 76 146 161 180 214 260 306 356 403
1 door
Cupboard width 76 cm:
3 adjustable shelves
99,25

Not available in IOS-C, IOS-M-C

Diagram shows L

Module Below 100 MU60100S2T L/R 60 302 326 357 405 494 581 666 698
module height 100 cm MU76100S2T L/R 76 302 326 357 405 494 581 666 698
13 13

2 drawers
Cupboard width 76 cm:
1 door
Not available in IOS-C, IOS-M-C
2 adjustable shelves
73

Diagram shows L

Module Below 100 MU60100S2Z 60 457 483 524 585 679 772 865 892
module height 100 cm MU76100S2Z 76 457 483 524 585 679 772 865 892
13 13

2 drawers
1 pullout
73

Module Below 100 MU60100ZT L/R 60 238 254 285 323 397 469 548 608
module height 100 cm MU76100ZT L/R 76 238 254 285 323 397 469 548 608
27

1 pullout
Cupboard width 76 cm:
1 door
Not available in IOS-C, IOS-M-C
2 adjustable shelves
73

Diagram shows L

Module Below 100 MU60100SZ3 60 490 522 557 618 727 835 978 1043
13,0 module height 100 cm MU76100SZ3 76 490 522 557 618 727 835 978 1043
26,25 1 drawer
3 pullouts
26,25

33,0

Price group
Modules Below
Module height 113 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8 Neutral

Module Below 113 MU60113T L/R 60 183 210 231 270 308 352 399 448
module height 113 cm MU76113T L/R 76 183 210 231 270 308 352 399 448
1 door
Cupboard width 76 cm:
3 adjustable shelves
112,5

Not available in IOS-C, IOS-M-C

Diagram shows L

Module Below 113 MU60113ST L/R 60 223 239 267 303 375 446 523 587
module height 113 cm MU76113ST L/R 76 223 239 267 303 375 446 523 587
13,0

1 drawer
Cupboard width 76 cm:
1 door
Not available in IOS-C, IOS-M-C
99,25

3 adjustable shelves

Diagram shows L

Module Below 113 MU60113S3Z2X 60 609 656 695 761 889 1015 1151 1244
module height 113 cm MU76113S3Z2X 76 609 656 695 761 889 1015 1151 1244
3 drawers
27 13 13 13

2 pullouts
47

34.06 1/2022
 Price group
Modules Appliance niche (open)
for carcase height 152.5 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance niche .
(open)

1 appliance niche 33 - 39 cm MGN6040 60 35 40 49 62 85 109 142 157

MGN7640 76 35 40 49 62 85 109 142 157

1 appliance niche 40 - 45 cm MGN6053 60 35 40 49 62 85 109 142 157

MGN7653 76 35 40 49 62 85 109 142 157

1 appliance niche 58 - 60 cm MGN6066 60 35 40 49 62 85 109 142 157

MGN7666 76 35 40 49 62 85 109 142 157

1 appliance niche 82 - 92 cm MGN6093 60 35 40 49 62 85 109 142 157

MGN7693 76 35 40 49 62 85 109 142 157

Price group
Modules Appliance niche (open)
for carcase heights 197.4 / 210.65 / 223.9 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance niche .
(open)

1 appliance niche 33 - 43 cm MGN6045 60 35 40 49 62 85 109 142 157

MGN7645 76 35 40 49 62 85 109 142 157

1 appliance niche 44 - 56 cm MGN6058 60 35 40 49 62 85 109 142 157

MGN7658 76 35 40 49 62 85 109 142 157

1 appliance niche 57 - 60 cm MGN6071 60 35 40 49 62 85 109 142 157

MGN7671 76 35 40 49 62 85 109 142 157

1 appliance niche 82 - 95 cm MGN6097 60 35 40 49 62 85 109 142 157

MGN7697 76 35 40 49 62 85 109 142 157

1 appliance niche 96 - 108 cm MGN60110 60 35 40 49 62 85 109 142 157

MGN76110 76 35 40 49 62 85 109 142 157

1 appliance niche 109 - 122 cm MGN60124 60 35 40 49 62 85 109 142 157

MGN76124 76 35 40 49 62 85 109 142 157

Bracket for appliance per pair

1 pair of steel appliance brackets GUWIN 44
6 x 6 cm, 50 cm long
for receiving appliances
For optimising gaps (min. 0.3 cm)
between two appliances.
Installation on site.

2 appliances can be placed in one niche if

GUWIN is ordered in addition.
For the relevant appliance niche MGN.. both
appliance types must be stated.

The front above appliance niches MGN.. is height adjusted to the appliance without joint.

1/2022 34.07
 Price group
Modules Appliance double niche (open)
for carcase height 152.5 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance double niche .
(open)

1 appliance double niche 96 - 104 cm MGN60106D 60 35 40 49 62 85 109 142 157

MGN76106D 76 35 40 49 62 85 109 142 157

Price group
Modules Appliance double niche (open)
for carcase heights 197.4 / 210.65 / 223.9 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance double niche .
(open)

1 appliance double niche 66 - 76 cm MGN6084D 60 35 40 49 62 85 109 142 157

MGN7684D 76 35 40 49 62 85 109 142 157

1 appliance double niche 82 - 95 cm MGN6097D 60 35 40 49 62 85 109 142 157

MGN7697D 76 35 40 49 62 85 109 142 157

1 appliance double niche 96 - 108 cm MGN60110D 60 35 40 49 62 85 109 142 157

MGN76110D 76 35 40 49 62 85 109 142 157

1 appliance double niche 109 - 122 cm MGN60124D 60 35 40 49 62 85 109 142 157

MGN76124D 76 35 40 49 62 85 109 142 157

The front above appliance niches MGN..D is height adjusted to the appliance without joint.
When 2 appliances are used, then the thickness of a 2 cm intermediate shelf has to be added according to the type of the overall niche height. For stackable
appliances or those which permit the use of guide rails, this addition is not necessary. Guide rails are an accessory and are fitted during installation. Please
order accordingly.

Price group
Modules Appliance niche with lift-up door

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance niche with MGK6040 60 200 201 218 245 287 332 354 384
lift-up door MGK7640 76 200 201 218 245 287 332 354 384
1 lift-up door 39.5 cm high
for appliance niche 33 cm high
and 49 cm wide

The appropriate appliance niche must be

increased in height to the module planning
dimension MGK.. (= lift-up door height).

Module Appliance niche with MGK6046 60 209 212 232 260 309 256 367 406
lift-up door MGK7646 76 209 212 232 260 309 256 367 406
1 lift-up door 46 cm high
for appliance niche 40 cm high

The appropriate appliance niche must be

increased in height to the module planning
dimension MGK.. (= lift-up door height).

Module Appliance niche with MGK6060 60 234 234 256 284 341 297 412 463
lift-up door MGK7660 76 234 234 256 284 341 297 412 463
1 lift-up door 59.5 cm high
for appliance niche 53 cm high
and 49 cm wide

The appropriate appliance niche must be

increased in height to the module planning
dimension MGK.. (= lift-up door height).

34.08 1/2022
 Price group
Modules Appliance niche with door
only as Module below

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance niche with .
door

1 door 72.75 cm high in front of MGT6073 L/R 60 97 114 145 187 237 284 358 391
appliance niche 68 cm MGT7673 L/R 76 97 114 145 187 237 284 358 391
Cupboard width 76 cm:
Diagram shows L
Not available in IOS-C, IOS-M-C

1 door 86.0 cm high in front of MGT6086 L/R 60 97 114 149 185 232 279 366 398
appliance niche 72 cm MGT7686 L/R 76 97 114 149 185 232 279 366 398
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 99.25 cm high in front of MGT6099 L/R 60 109 127 160 203 261 320 383 423
appliance niche 88 cm MGT7699 L/R 76 109 127 160 203 261 320 383 423
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 110.9 cm high in front of MGT60111 L/R 60 123 145 185 232 303 372 431 478
appliance niche 103 cm MGT76111 L/R 76 123 145 185 232 303 372 431 478
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 113 cm high in front of MGT60113 L/R 60 119 133 170 218 283 347 401 442
appliance niche 103 cm MGT76113 L/R 76 119 133 170 218 283 347 401 442
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 118 cm high in front of MGT60118 L/R 60 122 136 175 223 292 359 408 449
appliance niche 103 cm MGT76118 L/R 76 122 136 175 223 292 359 408 449
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 131 cm high in front of MGT60131 L/R 60 128 143 181 232 303 375 421 460
appliance niche 122 cm MGT76131 L/R 76 128 143 181 232 303 375 421 460
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 144 cm high in front of MGT60144 L/R 60 132 151 191 240 317 394 434 469
appliance niche 122 cm MGT76144 L/R 76 132 151 191 240 317 394 434 469
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door strapped together or Front line 73 cm

1 door 152.25 cm high in front of MGT60153 L/R 60 154 169 213 260 341 419 463 501
appliance niche 140 cm MGT76153 L/R 76 154 169 213 260 341 419 463 501
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

2 doors or 1 door 157.4 cm high MGT60157 L/R 60 162 176 221 271 351 431 476 515
in front of appliance niche 140 cm MGT76157 L/R 76 162 176 221 271 351 431 476 515
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

2 doors or 1 door strapped together or Front line 73 cm

1 door 170.65 cm high in front of MGT60171 L/R 60 176 192 239 287 374 460 509 550
appliance niche 158 cm MGT76171 L/R 76 176 192 239 287 374 460 509 550
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

2 doors or 1 door strapped together or Front line 73 cm

1 door 183.9 cm high in front of MGT60184 L/R 60 200 240 313 413 486 560 644 714
appliance niche 178 cm MGT76184 L/R 76 200 240 313 413 486 560 644 714
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1/2022 34.09
 Price group
Modules Appliance niche with door
only as Module below

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
2 doors or 1 door strapped together or Front line 73 cm
1 door 197.15 cm high in front of MGT60197 L/R 60 223 264 345 445 521 597 687 760
appliance niche 178 cm MGT76197 L/R 76 223 264 345 445 521 597 687 760
1 support hinge SSCH
Cupboard width 76 cm:
when the front projects more than 26 cm
Not available in IOS-C, IOS-M-C
from the appliance

2 doors or 1 door strapped together or Front line 73 cm

1 door 210.4 cm high in front of MGT60210 L/R 60 261 311 399 537 617 698 790 870
appliance niche 178 cm MGT76210 L/R 76 261 311 399 537 617 698 790 870
1 support hinge SSCH
Cupboard width 76 cm:
when the front projects more than 26 cm
Not available in IOS-C, IOS-M-C
from the appliance

2 doors or 1 door strapped together or Front line 73 cm

1 door 223.65 cm high in front of MGT60224 L/R 60 299 360 454 627 714 800 892 980
appliance niche 178 cm MGT76224 L/R 76 299 360 454 627 714 800 892 980
1 support hinge SSCH
Cupboard width 76 cm:
when the front projects more than 26 cm
Not available in IOS-C, IOS-M-C
from the appliance

The appropriate appliance niche must be

increased in height to the module planning
dimension MGT.. (= door height).

Cutout for wine cooler ANGTRAUS 197

Cutout dimensions adapted to wine cooler
Not available in IOS-C, IOS-M-C, SOLID-C, VALAIS-C
For wine coolers from Liebherr, Gaggenau and Miele.
Processing for MGT .. .

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

34.10 1/2022
 Price group
Modules Appliance niche with door
not as Module below

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance niche with .
door

1 door 74.25 cm high in front of MGT6075 L/R 60 97 114 145 187 237 284 358 391
appliance niche 72 cm MGT7675 L/R 76 97 114 145 187 237 284 358 391
Cupboard width 76 cm:
Diagram shows L
Not available in IOS-C, IOS-M-C

1 door 79.25 cm high in front of MGT6080 L/R 60 97 114 145 187 237 284 358 391
appliance niche 72 cm MGT7680 L/R 76 97 114 145 187 237 284 358 391
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 92.5 cm high in front of MGT6093 L/R 60 110 123 157 200 256 312 390 435
appliance niche 88 cm MGT7693 L/R 76 110 123 157 200 256 312 390 435
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 97.65 cm high in front of MGT6098 L/R 60 114 130 165 211 270 329 402 451
appliance niche 88 cm MGT7698 L/R 76 114 130 165 211 270 329 402 451
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 106.0 cm high in front of MGT60106 L/R 60 118 140 175 221 285 349 420 463
appliance niche 103 cm MGT76106 L/R 76 118 140 175 221 285 349 420 463
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 110.9 cm high in front of MGT60111 L/R 60 123 145 185 232 303 372 431 478
appliance niche 103 cm MGT76111 L/R 76 123 145 185 232 303 372 431 478
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 124.15 cm high in front of MGT60125 L/R 60 133 151 191 244 320 393 447 491
appliance niche 122 cm MGT76125 L/R 76 133 151 191 244 320 393 447 491
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 137.4 cm high in front of MGT60138 L/R 60 142 157 200 254 332 412 461 504
appliance niche 122 cm MGT76138 L/R 76 142 157 200 254 332 412 461 504
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

2 doors or 1 door 150.65 cm high MGT60151 L/R 60 147 164 210 264 347 431 476 514
in front of appliance niche 140 cm MGT76151 L/R 76 147 164 210 264 347 431 476 514
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

2 doors or 1 door strapped together or MGT60164 L/R 60 177 193 241 296 384 473 522 564
1 door 163.9 cm high in front of MGT76164 L/R 76 177 193 241 296 384 473 522 564
appliance niche 158 cm
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

2 doors or 1 door strapped together or MGT60178 L/R 60 193 211 263 315 409 504 556 603
1 door 177.15 cm high in front of MGT76178 L/R 76 193 211 263 315 409 504 556 603
appliance niche 175 cm
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C
The appropriate appliance niche must be
increased in height to the module planning
dimension MGT.. (= door height).

1/2022 34.11
 Price group
Modules Appliance niche with door
Processing / Accessories

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Front alignment fitting FRAUSR 97
When the door protrudes more than 26 cm
Not available in IOS-C, IOS-M-C, VALAIS-C
above the appliance, we recommend a
front alignment fitting.
Max. overhang one third of front height!

Change of appliance position ANGPM 75

h1 In order to keep the front overhang relating to
the appliance front as small as possible (smaller
than 26 cm), the appliance is placed on an
additional shelf in the centre of the front.

Applicable for ergonomic reasons or as an

alternative to the front alignment fitting.

h2

h1 = h2

Support hinge for fridge and freezers ZSSCH 32

with appliance hinge
1 support hinge with base plate
for fitting on site
for additional requirement

For doors with more than 26 cm overhang from the appliance.

Hinge can be used left/right and is fitted after installation of
fridge or freezer.
Delivery includes installation instructions, installation template
and screws.
To be used in combination with fridges and freezers of the
brands: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux,
Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense, LG,
Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung,
Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei

34.12 1/2022
 Price group
Modules Above
Modules heights 27, 40, 53, 66, 80 and 93 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Above 27 MO6027K 60 67 75 90 108 138 168 209 232
module height 27 cm MO7627K 76 67 75 90 108 138 168 209 232
1 top hinged door

Module Above 40 MO6040T L/R 60 63 70 91 110 146 182 234 261

module height 40 cm MO7640T L/R 76 63 70 91 110 146 182 234 261
1 door
Cupboard width 76 cm:
1 adjustable shelf
Not available in IOS-C, IOS-M-C
Diagram shows L

Module Above 40 MO6040K 60 92 99 118 134 173 210 261 287

module height 40 cm MO7640K 76 92 99 118 134 173 210 261 287
1 top hinged door
1 adjustable shelf

Module Above 53 MO6053T L/R 60 77 92 111 132 178 222 255 300
module height 53 cm MO7653T L/R 76 77 92 111 132 178 222 255 300
1 door
Cupboard width 76 cm:
1 adjustable shelf
Not available in IOS-C, IOS-M-C
Diagram shows L

Module Above 53 MO6053K 60 114 123 144 168 212 259 290 331
module height 53 cm MO7653K 76 114 123 144 168 212 259 290 331
1 top hinged door
1 adjustable shelf

Module Above 66 MO6066T L/R 60 111 117 140 165 213 263 314 346
module height 66 cm MO7666T L/R 76 111 117 140 165 213 263 314 346
1 door
Cupboard width 76 cm:
2 adjustable shelves
Not available in IOS-C, IOS-M-C

Diagram shows L

Module Above 80 MO6080T L/R 60 119 128 152 179 231 279 332 370
module height 80 cm MO7680T L/R 76 119 128 152 179 231 279 332 370
1 door
Cupboard width 76 cm:
2 adjustable shelves
Not available in IOS-C, IOS-M-C

Diagram shows L

Module Above 93 MO6093T L/R 60 145 154 179 208 264 318 378 430
module height 93 cm MO7693T L/R 76 145 154 179 208 264 318 378 430
1 door
Cupboard width 76 cm:
3 adjustable shelves
Not available in IOS-C, IOS-M-C

Diagram shows L

Front line aligned ANFLIN L/R 0

the front height of the upper module
is exactly the same height as that of
the adjoining cupboard

State required alignment to neighbouring

cupboard left or right.
Only valid for modular tall units.

1/2022 34.13
 Price group
Basic units for modular tall units
Carcase heights 152.5 / 197.4 / 210.65 / 223.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Basic unit Carcase height 152.5 cm
for furnishing with modules VHM30153 30 199 199 199 199 199 199 199 199
MU ... and MO ... VHM45153 45 217 217 217 217 217 217 217 217
VHM50153 50 225 225 225 225 225 225 225 225
VHM60153 60 239 239 239 239 239 239 239 239

Basic unit Carcase height 197.4 cm

for furnishing with modules VHM30197 30 235 235 235 235 235 235 235 235
MU ... and MO ... VHM45197 45 245 245 245 245 245 245 245 245
VHM50197 50 251 251 251 251 251 251 251 251
VHM60197 60 268 268 268 268 268 268 268 268

Basic unit Carcase height 210.65 cm

for furnishing with modules VHM30210 30 243 243 243 243 243 243 243 243
MU ... and MO ... VHM45210 45 261 261 261 261 261 261 261 261
VHM50210 50 268 268 268 268 268 268 268 268
VHM60210 60 277 277 277 277 277 277 277 277

Basic unit Carcase height 223.9 cm

for furnishing with modules VHM30224 30 249 249 249 249 249 249 249 249
MU ... and MO ... VHM45224 45 270 270 270 270 270 270 270 270
VHM50224 50 275 275 275 275 275 275 275 275
VHM60224 60 284 284 284 284 284 284 284 284

Extra charge for tall units MPH1B 156 156 156 156 156 156 156 156
up to width 76 cm

Valid for all tall units and modular

tall units.

Programme TOCCO-C one-sided with thick edge.

34.14 1/2022
 Price group
Modules Below
Module height 73 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 73 MU3073T L/R 30 103 109 127 150 186 223 266 294
module height 73 cm MU4573T L/R 45 105 112 131 156 199 242 284 318
1 door MU5073T L/R 50 108 115 133 159 203 246 291 326
73

2 adjustable shelves MU6073T L/R 60 110 118 138 164 212 254 303 339

Diagram shows L

Module Below 73 MU3073Z 30 173 178 199 218 254 293 331 360
module height 73 cm MU4573Z 45 177 182 207 226 272 318 356 390
1 pullout MU5073Z 50 179 186 210 232 277 326 364 397
73

MU6073Z 60 183 192 216 239 287 335 382 414

Module Below 73 MU3073ZIZ 30 292 295 314 332 368 405 445 472
module height 73 cm MU4573ZIZ 45 299 303 326 345 391 442 476 511
1 pullout MU5073ZIZ 50 303 308 331 353 398 450 490 520
73

1 inner pullout MU6073ZIZ 60 310 320 342 364 415 463 511 542

Module Below 73 MU3073ST L/R 30 185 194 220 251 305 358 405 439
module height 73 cm MU4573ST L/R 45 190 201 227 266 325 390 437 473
13

1 drawer MU5073ST L/R 50 193 207 231 270 330 397 448 483
1 door MU6073ST L/R 60 199 213 238 279 344 408 466 505
60

2 adjustable shelves
Diagram shows L

Module Below 73 MU3073SZ 30 259 266 290 320 371 424 473 508
module height 73 cm MU4573SZ 45 267 273 298 333 394 460 510 548
13

1 drawer MU5073SZ 50 270 278 303 340 401 469 521 559
60

1 pullout MU6073SZ 60 276 286 313 352 418 484 545 582

Module Below 73 MU3073SZIZ 30 376 382 405 434 485 538 584 619
module height 73 cm MU4573SZIZ 45 387 392 418 453 515 583 629 669
13

1 drawer MU5073SZIZ 50 392 399 425 461 524 596 643 682
1 pullout MU6073SZIZ 60 400 413 440 477 547 615 673 710
60

1 inner pullout

Module Below 73 MU3073S2Z 30 328 341 370 406 473 539 597 606
module height 73 cm MU4573S2Z 45 335 351 384 424 501 584 642 655
13 13

2 drawers MU5073S2Z 50 341 358 389 433 512 597 658 669
1 pullout MU6073S2Z 60 348 369 401 449 531 616 687 696
47

Module Below 73 MU3073Z2X 30 265 270 295 325 399 472 541 583
module height 73 cm MU4573Z2X 45 271 277 303 339 423 514 582 631
27

2 pullouts MU5073Z2X 50 274 282 308 345 432 523 596 644
Front heights: MU6073Z2X 60 280 291 320 357 450 540 622 671
47

above 26.25 cm, below 46.25 cm

Module Below 73 MU3073SZ2 30 370 386 417 450 537 625 679 732
module height 73 cm MU4573SZ2 45 379 396 431 467 570 679 732 791
27 13

1 drawer MU5073SZ2 50 386 403 437 477 580 693 748 807
2 pullouts MU6073SZ2 60 394 417 452 495 605 714 781 840
33

Module Below 73 MU3073Z2 30 265 270 295 325 399 472 541 583
module height 73 cm MU4573Z2 45 271 277 303 339 423 514 582 631
40

2 pullouts MU5073Z2 50 274 282 308 345 432 523 596 644
Front heights: MU6073Z2 60 280 291 320 357 450 540 622 671
33

above 39.5 cm, below 33.0 cm

1/2022 34.15
 Price group
Modules Below
Module height 86 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 86 MU3086T L/R 30 122 127 152 177 221 266 312 347
module height 86 cm MU4586T L/R 45 124 131 156 183 235 287 337 376
1 door MU5086T L/R 50 126 133 158 186 239 293 344 386
86,0

2 adjustable shelves MU6086T L/R 60 128 139 164 193 249 302 359 400

Diagram shows L

Module Below 86 MU3086Z 30 186 191 207 230 269 309 348 377
module height 86 cm MU4586Z 45 190 195 213 242 288 337 375 404
1 pullout MU5086Z 50 192 199 217 245 295 344 384 414
MU6086Z 60 194 204 225 252 304 354 399 435

86,0

Module Below 86 MU3086ZIZ 30 299 302 329 341 385 421 456 492
module height 86 cm MU4586ZIZ 45 307 311 339 355 403 455 495 530
1 pullout MU5086ZIZ 50 311 317 343 364 409 464 504 543
1 inner pullout MU6086ZIZ 60 318 329 354 377 431 481 528 564

86,0

Module Below 86 MU3086ST L/R 30 193 207 230 261 316 370 425 467
module height 86 cm MU4586ST L/R 45 199 213 236 273 335 402 457 507
13

1 drawer MU5086ST L/R 50 203 217 240 278 342 410 467 517
1 door MU6086ST L/R 60 208 223 247 287 356 424 490 538
73

2 adjustable shelves

Diagram shows L

Module Below 86 MU3086SZ 30 261 270 292 324 377 431 484 527
module height 86 cm MU4586SZ 45 269 277 300 338 399 467 521 571
13

1 drawer MU5086SZ 50 272 282 305 344 407 477 535 582
1 pullout MU6086SZ 60 278 291 316 356 425 493 558 607
73

Module Below 86 MU3086SZIZ 30 420 433 468 517 596 675 770 835
module height 86 cm MU4586SZIZ 45 431 447 483 538 630 733 828 902
13

1 drawer MU5086SZIZ 50 437 455 492 549 643 748 849 920
1 pullout MU6086SZIZ 60 448 468 509 570 670 770 886 960
73

1 inner pullout

Module Below 86 MU3086SZ2 30 389 404 436 470 561 650 708 770
13,0
module height 86 cm MU4586SZ2 45 398 419 450 490 595 706 763 832
26,25 1 drawer MU5086SZ2 50 404 426 458 500 607 721 780 850
2 pullouts MU6086SZ2 60 416 438 474 518 632 743 815 885
46,25

Module Below 86 MU3086S2Z 30 346 361 392 429 496 565 627 648
module height 86 cm MU4586S2Z 45 355 371 403 448 524 612 675 699
13 13

2 drawers MU5086S2Z 50 360 379 409 456 536 626 691 714
1 pullout MU6086S2Z 60 368 392 424 472 558 644 722 744
60

Module Below 86 MU3086S2Z2 30 476 496 528 573 652 733 844 902
module height 86 cm MU4586S2Z2 45 490 512 546 597 690 795 909 974
27 13 13

2 drawers MU5086S2Z2 50 498 521 555 609 703 811 931 995
2 pullouts MU6086S2Z2 60 509 538 574 630 734 837 972 1036
33

Module Below 86 MU3086Z3 30 376 391 426 461 533 607 720 763
module height 86 cm MU4586Z3 45 387 402 440 480 566 659 774 825
26,25
3 pullouts MU5086Z3 50 392 409 447 491 576 673 794 842
26,25 MU6086Z3 60 400 424 461 509 600 693 827 878
33,0

Module Below 86 MU3086Z2X 30 269 276 304 337 420 497 568 616
module height 86 cm MU4586Z2X 45 276 285 314 352 443 540 611 665
26,25 2 pullouts MU5086Z2X 50 279 291 318 359 452 551 626 678
Front heights: MU6086Z2X 60 286 299 330 372 470 569 653 706
above 26.25 cm, below 59.5 cm
59,5

34.16 1/2022
 Price group
Modules Below
Module height 86 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 86 MU3086Z2 30 269 276 304 337 420 497 568 616
module height 86 cm MU4586Z2 45 276 285 314 352 443 540 611 665
39,5 2 pullouts MU5086Z2 50 279 291 318 359 452 551 626 678
Front heights: MU6086Z2 60 286 299 330 372 470 569 653 706
above 39.5 cm, below 46.25 cm
46,25

Price group
Modules Above

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Above 27 MO3027K 30 63 69 83 96 121 147 182 202
module height 27 cm MO4527K 45 65 71 86 101 128 159 196 217
1 top hinged door MO5027K 50 66 74 87 103 131 162 201 222
MO6027K 60 67 75 90 108 138 168 209 232

Module Above 40 MO3040T L/R 30 59 66 84 98 129 160 203 226

module height 40 cm MO4540T L/R 45 62 68 87 103 138 173 218 246
1 door MO5040T L/R 50 62 68 88 105 141 177 224 250
1 adjustable shelf MO6040T L/R 60 63 70 91 110 146 182 234 261
Diagram shows L

Module Above 40 MO3040K 30 87 92 110 122 153 184 226 250

module height 40 cm MO4540K 45 89 94 113 127 163 200 245 269
1 top hinged door MO5040K 50 90 96 115 129 166 204 250 275
1 adjustable shelf MO6040K 60 92 99 118 134 173 210 261 287

Module Above 53 MO3053T L/R 30 71 85 102 120 159 195 222 260
module height 53 cm MO4553T L/R 45 73 88 105 125 168 211 239 280
1 door MO5053T L/R 50 74 89 108 127 171 215 245 286
1 adjustable shelf MO6053T L/R 60 77 92 111 132 178 222 255 300

Diagram shows L

Module Above 53 MO3053K 30 107 115 133 151 190 226 252 290
module height 53 cm MO4553K 45 110 118 138 158 201 246 270 313
1 top hinged door MO5053K 50 112 120 140 161 204 251 276 318
1 adjustable shelf MO6053K 60 114 123 144 168 212 259 290 331

Module Above 66 MO3066T L/R 30 103 109 128 149 190 230 272 302
module height 66 cm MO4566T L/R 45 107 112 132 156 202 250 294 326
1 door MO5066T L/R 50 109 114 135 159 205 255 301 332
2 adjustable shelves MO6066T L/R 60 111 117 140 165 213 263 314 346

Diagram shows L

Module Above 72 MO3072T L/R 30 108 114 135 156 197 238 281 312
module height 72 cm MO4572T L/R 45 111 116 140 162 209 259 304 336
1 door MO5072T L/R 50 112 118 142 165 212 264 311 344
2 adjustable shelves MO6072T L/R 60 116 123 149 174 225 275 328 364

Diagram shows L

Module Above 80 MO3080T L/R 30 113 118 141 163 205 246 290 322
module height 80 cm MO4580T L/R 45 115 122 145 170 217 266 312 348
1 door MO5080T L/R 50 117 123 147 173 221 271 318 357
2 adjustable shelves MO6080T L/R 60 119 128 152 179 231 279 332 370

Diagram shows L

Module Above 85 MO3085T L/R 30 123 130 153 177 219 262 310 348
module height 85 cm MO4585T L/R 45 126 135 158 184 233 283 332 375
1 door MO5085T L/R 50 128 139 160 188 237 291 341 384
2 adjustable shelves MO6085T L/R 60 131 143 165 194 248 300 357 400

Diagram shows L

1/2022 34.17
 Price group
Modules Above

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Above 93 MO3093T L/R 30 136 143 166 189 235 277 329 374
module height 93 cm MO4593T L/R 45 141 147 171 197 249 303 356 405
1 door MO5093T L/R 50 142 150 173 201 253 309 363 414
3 adjustable shelves MO6093T L/R 60 145 154 179 208 264 318 378 430

Diagram shows L

Module Above 98 MO3098T L/R 30 144 153 175 201 245 287 334 379
module height 98 cm MO4598T L/R 45 147 159 179 209 259 312 361 410
1 door MO5098T L/R 50 149 161 183 213 264 317 368 419
3 adjustable shelves MO6098T L/R 60 152 166 190 221 274 328 385 435

Diagram shows L

Module Above 111 MO30111T L/R 30 163 181 201 234 272 312 349 394
module height 111 cm MO45111T L/R 45 168 187 207 244 288 338 375 426
1 door MO50111T L/R 50 170 191 210 249 295 346 384 434
3 adjustable shelves MO60111T L/R 60 174 197 216 257 307 357 401 454

Diagram shows L

Module Above 125 MO30125T L/R 30 191 211 234 266 302 336 379 427
module height 125 cm MO45125T L/R 45 195 217 242 278 318 366 409 461
1 door MO50125T L/R 50 199 222 246 283 326 373 419 472
3 adjustable shelves MO60125T L/R 60 203 229 254 295 338 385 436 490

Diagram shows L

Module Above 138 MO30138T L/R 30 223 247 275 336 392 446 491 548
module height 138 cm MO45138T L/R 45 229 254 284 353 416 485 528 591
1 door MO50138T L/R 50 233 259 290 360 424 495 542 605
4 adjustable shelves MO60138T L/R 60 238 266 300 372 440 511 566 630

Diagram shows L

Module Above 151 MO30151T L/R 30 257 280 318 408 483 556 602 670
module height 151 cm MO45151T L/R 45 264 290 329 425 511 605 647 724
1 door MO50151T L/R 50 267 296 333 433 522 617 663 739
4 adjustable shelves MO60151T L/R 60 273 305 345 449 543 636 692 769

Diagram shows L

34.18 1/2022
 Price group
Tall unit top cupboards
Carcase height 26.5 / 39.75 / 53.0 / 66.25 / 79.5 / 92.75 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Tall unit top cupboard VHAK3027 30 152 156 172 183 222 256 282 302
Carcase height 26.5 cm VHAK4527 45 164 170 182 199 239 281 303 326
1 top hinged door VHAK5027 50 166 174 188 207 244 285 312 338
VHAK6027 60 173 181 196 218 255 295 323 347
No wall fixing. VHAK7027 70 182 192 212 242 280 313 346 375
VHAK7627 76 189 207 220 267 300 336 369 401
VHAK8027 80 224 245 265 305 354 400 444 481
VHAK9127 91 280 305 331 392 446 499 556 600

Tall unit top cupboard VHA3040 L/R 30 159 164 177 193 232 270 298 320
Carcase height 39.75 cm VHA4540 L/R 45 168 173 190 212 251 296 332 356
1 door VHA5040 L/R 50 171 179 200 219 270 317 339 360
1 adjustable shelf VHA6040 L/R 60 179 189 213 232 280 326 356 382
Diagram shows L
No wall fixing.

Tall unit top cupboard VHAK3040 30 171 176 189 211 244 282 311 333
Carcase height 39.75 cm VHAK4540 45 179 184 207 224 268 308 345 369
1 top hinged door VHAK5040 50 182 191 216 231 281 331 351 374
1 adjustable shelf VHAK6040 60 191 205 225 243 292 340 369 394
VHAK7040 70 208 222 234 286 321 356 392 423
No wall fixing. VHAK7640 76 215 226 240 297 338 376 415 449
VHAK8040 80 240 263 284 343 389 433 484 523
VHAK9140 91 292 325 357 425 485 547 626 677

Tall unit top cupboard VHA3053 L/R 30 182 190 215 230 255 284 327 347
Carcase height 53.0 cm VHA4553 L/R 45 184 195 218 251 286 318 339 387
1 door VHA5053 L/R 50 193 203 221 254 306 359 370 392
1 adjustable shelf VHA6053 L/R 60 200 213 230 270 314 361 393 424
VHA7053 L/R 70 240 259 285 338 375 413 499 539
Diagram shows L No wall fixing. VHA7653 L/R 76 270 290 320 384 409 436 551 597
Cupboard width 70, 76 cm:
Not available in IOS-C, IOS-M-C

Tall unit top cupboard VHA3066 L/R 30 226 270 287 298 312 329 367 378
Carcase height 66.25 cm VHA4566 L/R 45 230 277 293 306 333 357 402 427
1 door VHA5066 L/R 50 236 280 296 323 357 393 409 431
2 adjustable shelves VHA6066 L/R 60 239 283 301 327 361 396 433 467
VHA7066 L/R 70 301 368 397 418 446 470 558 600
Diagram shows L No wall fixing. VHA7666 L/R 76 335 413 445 463 486 512 620 668
Cupboard width 70, 76 cm:
Not available in IOS-C, IOS-M-C

Tall unit top cupboard VHA3080 L/R 30 251 280 301 321 347 371 424 446
Carcase height 79.5 cm VHA4580 L/R 45 256 284 304 332 361 393 457 489
1 door VHA5080 L/R 50 263 291 312 349 395 440 482 512
2 adjustable shelves VHA6080 L/R 60 268 294 320 354 400 446 491 527
VHA7080 L/R 70 343 384 418 458 499 539 643 693
Diagram shows L No wall fixing. VHA7680 L/R 76 379 428 466 509 546 584 721 778
Cupboard width 70, 76 cm:
Not available in IOS-C, IOS-M-C

Tall unit top cupboard VHA3093 L/R 30 280 287 313 352 384 415 481 513
Carcase height 92.75 cm VHA4593 L/R 45 282 293 321 370 413 454 517 555
1 door VHA5093 L/R 50 287 296 326 372 432 491 521 557
3 adjustable shelves VHA6093 L/R 60 292 306 335 390 443 495 548 588
VHA7093 L/R 70 382 401 440 513 562 611 729 785
No wall fixing. VHA7693 L/R 76 425 449 493 575 622 670 821 887
Diagram shows L
Cupboard width 70, 76 cm:
Not available in IOS-C, IOS-M-C

Programme TOCCO-C one-sided with thick edge at widths of 76 and 91 cm.

1/2022 34.19
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 152.5 cm
Front finish HP20153 L/R 20 81 87 95 104 115 124 128 138

Front finish blenders are manufactured with a maximum Carcase height 197.4 cm
20 cm width. Please make up larger dimension blenders HP20197 L/R 20 82 97 101 109 121 131 133 146
from rear panels in front finish RWF .. .
Laminate decors with horizontal texture are made, Carcase height 210.65 cm
starting from a blender height of 210 cm, in divided HP20210 L/R 20 98 109 112 121 136 156 161 174
style (front line 73 cm or 86 cm) and depending on
the material, at no extra charge. Carcase height 223.9 cm
Diagram shows L
Programmes SOLID-C and VALAIS-C in divided style HP20224 L/R 20 115 127 131 143 164 182 189 207
from blender height 197 cm (front line 73 cm or
86 cm). Carcase height 250 cm
HP20250 L/R 20 159 193 199 220 249 291 311 313

Tall unit corner blender 90° Carcase height 152.5 cm

Front finish HPE153 10 158 171 186 194 218 237 247 275
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width Carcase height 197.4 cm
HPE197 10 176 193 212 225 250 279 286 306
Please note: With use of handles deeper than
3 cm, the relevant leg length must be at least Carcase height 210.65 cm
7 cm. See sketch. HPE210 10 184 209 219 237 272 302 311 339
Flush with front.
Please state rear length (inside measurement) Carcase height 223.9 cm
from l to r on order. HPE224 10 221 246 259 283 323 360 370 401
7 Laminate decors with horizontal texture are made,
starting from a blender height of 210 cm, in divided Carcase height 250 cm
style (front line 73 cm or 86 cm) and depending on HPE250 10 267 304 313 325 384 442 481 525
7

the material, at no extra charge.

Programmes SOLID-C and VALAIS-C in divided style
from blender height 197 cm (front line 73 cm or
86 cm).

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 152.5 cm

Front finish HPEW153 10 168 181 199 204 227 248 265 286
Freely selectable angle up to max. 270°
(Programme BOSSA-C permitted up to 180°) Carcase height 197.4 cm
and freely selectable leg measurement from HPEW197 10 180 200 219 227 254 284 288 310
3 x 3 cm up to 10 x 10 cm width
Carcase height 210.65 cm
Flush with front. HPEW210 10 199 222 232 248 283 313 324 351
Please state rear length (inside measurement)
from l to r on order. Carcase height 223.9 cm
3 Laminate decors with horizontal texture are made, HPEW224 10 236 263 277 297 336 374 385 416
starting from a blender height of 210 cm, in divided
3

style (front line 73 cm or 86 cm) and depending on Carcase height 250 cm

the material, at no extra charge. HPEW250 10 268 313 316 372 423 475 512 540
Programmes SOLID-C and VALAIS-C in divided style
Carcase height 152.5 / 197.4 / 210.65 / 223.9 / 250 cm:
from blender height 197 cm (front line 73 cm or
Not available in IOS-C, IOS-M-C
86 cm).

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

34.20 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Divided blender .
available for HP.., HPE.. and HPEW..

Division of blender at 86.0 cm height MPPGT86 39

MP PGT 86
MP PGT 73
Division of blender at 72.75 cm height MPPGT73 39
MP PGT 60
MP PGT 47 Division of blender at 59.5 cm height MPPGT60 39

Division of blender at 46.25 cm height MPPGT47 39

Several divisions are possible.

MP PGT 73 Example: 1x HPE 197

1x MP PGT 73
MP PGT 47
1x MP PGT 47

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 152.5 cm
flush with carcase HSB20153 20 46 49 53 72 77 82 99 67

Carcase height 197.4 cm

HSB20197 20 49 51 59 76 83 89 104 70

Carcase height 210.65 cm

HSB20210 20 53 58 65 86 93 99 117 81

Carcase height 223.9 cm

HSB20224 20 62 68 77 102 110 117 139 96

1/2022 34.21
1/2022
Tall units with vertical recessed handles
Tall units, carcase height 145.75 cm

CARCASE LINE 80

Tall units 35. 01

Housing units 35. 01-03

Interior+ tall units 35. 03

End tall units 35. 04

Visible carcase sides 35. 04

Blenders 35. 05

Blenders 35. 06

Rear panels 35. 06

145.75 cm
Tall units
35.

1/2022 35.
 Tall units with vertical recessed handles
Tall units, carcase height 145.75 cm
T: Cupboard depth cm

Function cupboards Housing units Interior+ Angle cupboards

35.01 T: 36 / 48 / 58 cm 35.01 T: 58 cm 35.03 T: 58 cm 35.04 T: 58 cm

VH 30 146 VHG 60 146 4 S2 VH 50 146 I VHAW 30 146
VH 45 146 13,0
VH 60 146 I
66,0 VH 50 146 13,0 66,0
VH 60 146 66,0

79,25 79,25 79,25

79,25

35.01 T: 36 / 48 / 58 cm 35.01 T: 58 cm
VH 30 146 IZ4 VHG 60 146 5
VH 45 146 IZ4
66,0 VH 50 146 IZ4
VH 60 146 IZ4

79,25 92,5

35.01 T: 58 cm 35.02 T: 58 cm
VH 30 146 VZ VHG 60 146 5 S
VH 45 146 VZ
66,0 13,0

79,25 79,25

35.01 35.02
VH 30 146 N T: 58 cm
VH 45 146 N VHG 60 146 6
VH 50 146 N
VH 60 146 N
66,0
79,25

79,25

35.02 T: 58 cm
VHG 60 146 6 SZ2

13,0
26,25

39,5

35.02 T: 58 cm
VHG 60 146 9 SZ

13,0

39,5

35.02 T: 58 cm
VHG 60 146 10D Z

39,5
145.75 cm

35.02 T: 58 cm
Tall units

VHG 60 146 M6 Z
39,5

35. 39,5

35.02 T: 58 cm
VHGT 60 146 9 SZ
VHGTI 60 146 9 SZ

92,5
13,0

39,5

35.03 T: 58 cm
VHGT 60 146 10 Z
VHGTI 60 146 10 Z
105,75

39,5

35.03 T: 58 cm
VHGT 60 146 12 IS
VHGTI 60 146 12 IS
66,0

79,25

35.03 T: 58 cm
VHGT 60 146 14
VHGTI 60 146 14
66,0

79,25

35. 1/2022
 Price group
Tall units
Carcase height 145.75 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Storage unit Front line 80 cm
1 door strapped together or door VH30146 L/R 30 374 391 439 491 598 704 784 870
4 adjustable shelves VH45146 L/R 45 419 437 483 541 651 760 856 949
66,0 VH50146 L/R 50 435 452 499 553 675 796 889 977
Finishing top necessary, see page 81.04 VH60146 L/R 60 466 484 535 599 726 851 952 1050
and chapter 71.
79,25

Diagram shows L

Tall storage unit Front line 80 cm

1 door strapped together or door VH30146IZ4 L/R 30 974 998 1041 1096 1183 1267 1373 1466
4 inner pullouts VH45146IZ4 L/R 45 989 1009 1054 1109 1207 1304 1405 1496
66,0 VH50146IZ4 L/R 50 1002 1021 1067 1123 1233 1342 1435 1526
Finishing top necessary, see page 81.04 VH60146IZ4 L/R 60 1028 1047 1100 1162 1281 1400 1500 1596
and chapter 71.
79,25

Diagram shows L Exchange wide angle hinge ANIGE 0

through standard hinge, with spacer strip

Storage unit Front line 80 cm

1 large capacity pullout with front panels VH30146VZ 30 892 909 956 1009 1145 1281 1358 1459
5 adjustable wire baskets with glass bottoms VH45146VZ 45 1029 1044 1092 1146 1286 1426 1511 1619
66,0
Max. loading 15 kg per basket.
Finishing top necessary, see page 81.04
79,25
and chapter 71.

VZ-premium equipment MPVZ30P5 110

Frame inside faced in carcase style MPVZ45P5 153
5 adjustable shelves with glass sides

Niche door Front line 80 cm

1 door strapped together or door VH30146N L/R 30 360 372 429 485 542 598 680 750
with attached plinth VH45146N L/R 45 364 395 446 514 576 638 727 800
no rear panel VH50146N L/R 50 367 400 459 523 595 665 751 818
66,0

no floor VH60146N L/R 60 379 416 474 542 622 703 808 885

Fixing sides in matching carcase colour.

79,25

Plinth omitted with AN TU 85.

Finishing top necessary, see page 81.04
Diagram shows L and chapter 71.

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

Price group
Housing units
Carcase height 145.75 cm, carcase depth 56 cm
Neutral

A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit VHG601464S2 L/R 60 633 666 712 783 910 1039 1173 1226
1 appliance niche 33-39 cm
13,0 2 drawers Modular parts list
13,0 1 door VHGM60146
2 adjustable shelves MGN6040
MU60106S2T
For microwave (built-in trim kit will be necessary).
79,25
Finishing top necessary, see page 81.04
Diagram shows L and chapter 71.

Housing unit VHG601465 L/R 60 419 433 467 509 588 666 759 826
1 appliance niche 40-45 cm
1 door Modular parts list
3 adjustable shelves VHGM60146
MGN6053
For oven or microwave (built-in MU6093T
92,5 trim kit will be necessary).
Finishing top necessary, see page 81.04
Diagram shows L and chapter 71.

1/2022 35.01
 Price group
Housing units
Carcase height 145.75 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit VHG601465S L/R 60 519 544 584 643 747 852 963 1036
1 appliance niche 40-45 cm
1 drawer Modular parts list
13,0 1 door VHGM60146
2 adjustable shelves MGN6053
MU6093ST
79,25 For oven or microwave (built-in
trim kit will be necessary).
Diagram shows L Finishing top necessary, see page 81.04
and chapter 71.

Housing unit Front line 80 cm

1 appliance niche 58-60 cm VHG601466 L/R 60 393 407 440 480 555 627 713 766
1 door
2 adjustable shelves Modular parts list
VHGM60146
For ovens. MGN6066
79,25
Finishing top necessary, see page 81.04 MU6080T
and chapter 71.
Diagram shows L

Housing unit Front line 80 cm

1 appliance niche 58-60 cm VHG601466SZ2 60 741 774 825 889 1045 1198 1311 1394
1 drawer
13,0 2 pullouts Modular parts list
VHGM60146
26,25
For ovens. MGN6066
Finishing top necessary, see page 81.04 MU6080SZ2
39,5
and chapter 71.

Housing unit VHG601469SZ 60 565 595 630 680 745 811 949 1020
1 appliance niche 82-92 cm
1 drawer Modular parts list
1 pullout VHGM60146
MGN6093
13,0 For double oven or microwave/oven MU6053SZ
39,5 combination (built-in trim kit will
be necessary) or fridge.
Finishing top necessary, see page 81.04
and chapter 71.

Housing unit VHG6014610DZ 60 452 467 497 531 596 658 748 790
1 appliance double niche 96-104 cm
1 pullout Modular parts list
VHGM60146
For microwave/oven combination MGN60106D
(built-in trim kit will be necessary). MU6040Z
Finishing top necessary, see page 81.04
39,5
and chapter 71.

Housing unit VHG60146M6Z 60 652 668 715 776 883 990 1102 1174
39,5
1 lift-up door for
appliance niche 33 cm high Modular parts list
and 49 cm wide VHGM60146
1 appliance niche 58-60 cm MGK6040
1 pullout MGN6066
MU6040Z
39,5
For microwave and oven.
Diagram shows L Finishing top necessary, see page 81.04
and chapter 71.

Housing unit VHGT601469SZ L/R 60 640 678 738 818 916 1014 1197 1298
1 door for appliance niche 88 cm
1 drawer with integral ventilation
1 pullout VHGTI601469SZ L/R 60 640 678 738 818 916 1014 1197 1298
92,5
13,0 For integrated fridge or freezer. Modular parts list
Finishing top necessary, see page 81.04 VHGM60146
39,5
and chapter 71. MGT6093
Diagram shows L It is necessary to fit ventilator grille into finishing MU6053SZ
top of refrigeration housing.

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

35.02 1/2022
 Price group
Housing units
Carcase height 145.75 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit VHGT6014610Z L/R 60 535 567 623 690 796 898 1026 1096
1 door for appliance niche 103 cm
1 pullout with integral ventilation
VHGTI6014610Z L/R 60 535 567 623 690 796 898 1026 1096
105,75

For integrated fridge and freezer.

Finishing top necessary, see page 81.04 Modular parts list
and chapter 71. VHGM60146
39,5
It is necessary to fit ventilator grille into finishing MGT60106
Diagram shows L top of refrigeration housing. MU6040Z

Housing unit Front line 80 cm

1 door strapped together or door VHGT6014612IS L/R 60 442 461 511 570 664 758 805 848
for appliance niche 122-128 cm
66,0 1 inner drawer

For integrated fridge and freezer.

79,25 Finishing top necessary, see page 81.04
and chapter 71.
Diagram shows L It is necessary to fit ventilator grille into finishing
top of refrigeration housing.

Housing unit Front line 80 cm

1 door strapped together or door VHGT6014614 L/R 60 399 416 468 525 616 706 756 797
for appliance niche 140 cm
66,0 with integral ventilation
For integrated fridge and freezer. Front line 80 cm
Finishing top necessary, see page 81.04 VHGTI6014614 L/R 60 399 416 468 525 616 706 756 797
79,25 and chapter 71.
It is necessary to fit ventilator grille into finishing Modular parts list
Diagram shows L top of refrigeration housing. VHGM60146
MGT601468

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

Price group
Interior+ tall units
Carcase height 145.75 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Interior+ base tall unit Front line 80 cm
1 door strapped together or door VH50146I L/R 50 477 508 531 644 721 796 889 977
4 adjustable shelves, depth 34.7 cm VH60146I L/R 60 508 537 582 686 768 851 952 1050
66,0 additional Interior+ swing-out frame
essential

79,25 Wide angle hinges cannot be used.

Width and height alterations are not possible.
Diagram shows L
Finishing top necessary, see page 81.04
and chapter 71.

Interior+ swing-out frame For cupboard width 50 cm

1 swing-out frame with: IP50146 1027
3 adjustable profile shelves For cupboard width 60 cm
7 railings IP60146 1074
1 fixed railing side

Possible accessories
precise description see page 90.34.

Interior+ shelf IP50B 50 155

IP60B 60 160

Interior+ railing IP50R 50 73

IP60R 60 74

Interior+ glass jar set IPGD3 72

IPGD4 94

Interior+ container IP1423C 67

IP1435C 67

1/2022 35.03
 Price group
End tall units
Carcase height 145.75 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
End tall unit Basic type
1 composition angled door or angled door Front line 80 cm
4 fixed glass shelves VHAW30146 L/R 30 1179 1225 1305 1466 1601 1738 1886 2015
Always state interior style,
66,0
possible colours see chapter 11! Extra charge interior
MPK/KH/KG 0
Finishing top necessary, see page 81.04 MPFF/PF/VM 101
79,25 and chapter 71. MPFS/ME 147
Diagram shows R MPFG 230
MPH 209
Not available in ALURO-C, BOSSA-C, CONCRETE-A, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-A,
STEEL-C, STONE-A, STONE-C, VALAIS-C

LED-Linear-interior lighting For depth 58 cm

1 light with LED-strip AW58LE 236
integrated in the top
Light temperature 4000K, neutral white
1 adapter 240 volt 50 HZ, 24 volt,
40 watt
1 distributor for constant 4000K
1 extension cable 4 pole, 200 cm
1 HSSC sensor switch
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 145.75 cm
Side depth 34 cm FS14634 L/R 34 0 0 100 144 215 268 139
Side depth 46 cm FS14646 L/R 46 0 0 131 189 267 335 176
Side depth 56 cm FS14656 L/R 56 0 0 131 189 267 335 176
Side depth 61 cm FS14661 L/R 61 0 0 151 218 307 386 204
Side depth 66 cm FS14666 L/R 66 0 0 151 218 307 386 204
Side depth 76 cm FS14676 L/R 76 0 0 159 230 327 409 216
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 145.75 cm
Side depth up to 34 cm FSUEL14634 L/R 34 92 92 192 236 307 360 231
Side depth up to 46 cm FSUEL14646 L/R 46 92 92 223 281 359 427 268
Side depth up to 58 cm FSUEL14658 L/R 58 92 92 223 281 359 427 268
Side depth up to 63 cm FSUEL14663 L/R 63 92 92 243 310 399 478 296
Side depth up to 68 cm FSUEL14668 L/R 68 146 146 297 364 453 532 350
Side depth up to 76 cm FSUEL14676 L/R 76 146 146 305 376 473 555 362
Diagram shows R

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

35.04 1/2022
 Price group
Blenders

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 145.75 cm
Front finish HP20146 L/R 20 81 87 95 104 115 124 128 138

Front finish blenders are manufactured with a maximum

20 cm width. Please make up larger dimension blenders
from rear panels in front finish RWF .. .
145,5

Diagram shows L

Tall unit corner blender 90° Carcase height 145.75 cm

Front finish HPE146 10 158 171 186 194 218 237 247 275
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Please note: With use of handles deeper than

145,5 3 cm, the relevant leg length must be at least
7 cm. See sketch.
7 Flush with front.
Please state rear length (inside measurement)
from l to r on order.
7

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 145.75 cm

Front finish HPEW146 10 168 181 199 204 227 248 265 286
Freely selectable angle up to max. 270°
Not available in IOS-C, IOS-M-C
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width
145,5
Flush with front.
3 Please state rear length (inside measurement)
from l to r on order.
3

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided blender .
available for HP.., HPE.. and HPEW..

Division of blender at 79.5 cm height MPPGT80 39

MP PGT 80
Division of blender at 66.25 cm height MPPGT66 39
MP PGT 66
MP PGT 53 Division of blender at 53.0 cm height MPPGT53 39

Several divisions are possible.

Example: 1x HPE 204

1x MP PGT 80
MP PGT 80 1x MP PGT 53
MP PGT 53

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

1/2022 35.05
 Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 145.75 cm
flush with carcase HSB20146 20 46 49 53 72 77 82 99 67

Price group
Rear panels
Front finish

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 80 cm
66,0
in variable sizes RWF146 326 355 444 541 709 873 999 1112
Height up to 145.5 cm
Max. width 120 cm Not available in IOS-C, IOS-M-C
79,25 with loose plinth

Minimum charged 0.5 metres.

Rear panel in Front line 80 cm

front finish RWF30146 30 160 173 222 273 345 418 467 527
in fixed front sizes RWF45146 45 175 190 238 295 379 463 525 589
66,0 with loose plinth RWF50146 50 180 196 245 300 394 484 555 617
For carcase height 145.75 cm RWF60146 60 192 215 263 324 432 540 610 677
old RW .. 146
79,25

35.06 1/2022
Tall units with vertical recessed handles
Tall units, carcase height 190.65 cm

CARCASE LINE 80

Tall units 36. 01

Tall utility units 36. 02

Housing units 36. 03-04

Slide-away doors tall units 36. 05

Accessories for slide-away doors cupboards 36. 06

Corner tall units 36. 07

Function tall units 36. 08

Interior+ tall units 36. 09

End tall units 36. 09-10

Visible carcase sides 36. 10-11

Blenders 36. 11-12

Blenders 36. 12

Rear panels 36. 12

190.65 cm
Tall units
36.

1/2022 36.
 Tall units with vertical recessed handles
Tall units, carcase height 190.65 cm
T: Cupboard depth cm

Tall units Housing units Slide-away doors cupboards Corner units Interior+

36.01 T: 36 / 48 / 58 cm 36.03 T: 58 cm 36.05 T: 68 cm 36.07 T: 58 cm 36.09 T: 58 cm

VH 30 190 VHG 60 190 6 VHVG 70 190 VHEE 115 190 ULM VH 50 190 I
VH 45 190 39,5
68 GS VHEE 125 190 ULM VH 60 190 I
VH 50 190
110,9 VH 60 190 110,9
110,9 110,9

79,25
79,25 79,25 79,25 79,25

36.01 T: 36 / 48 / 58 cm 36.03 T: 58 cm 36.05 T: 68 cm 36.07 T: 58 cm

VH 45 190 SZ2 VHG 60 190 6 SZ2 VHVG 70 190 68 VHEE 115 190 HLM
VH 50 190 SZ2 39,5
VHEE 125 190 HLM
VH 60 190 SZ2
110,9 110,9
13,0 110,9
13,0
26,25 26,25 Angle cupboards
79,25
39,5 39,5 79,25

36.01 T: 36 / 48 / 58 cm 36.03 T: 58 cm 36.05 T: 68 cm 36.09 T: 36 / 58 cm

VH 30 190 IZ4 26,25 VHG 60 190 11D K VHVG 70 190 68 VHAW 30 190
VH 45 190 IZ4 WM
VH 50 190 IZ4
110,9 VH 60 190 IZ4 110,9
110,9
Function cupboards
79,25
79,25 52,75 79,25

36.01 T: 36 / 48 / 58 cm 36.03 T: 58 cm 36.08 T: 58 cm 36.10 T: 36 / 58 cm

VH 30 190 GVZE 26,25 VHG 60 190 11D VH 50 190 VC VHAW 30 190 PG
VH 45 190 GVZE KZ2 VH 60 190 VC 39,5

110,9
71,65

26,25
190,4 26,25 79,25 79,25

36.01 T: 36 / 48 / 58 cm 36.03 T: 58 cm 36.08 T: 58 cm

VH 30 190 GVZ2 39,5
VHGT 60 190 12 Z VH 60 190 VT
VH 45 190 GVZ2 VHGTI 60 190 12 Z
VH 50 190 GVZ2
110,9 VH 60 190 GVZ2 110,9

124,15
79,25 26,25 79,25

36.01 36.03 36.08

T: 58 cm T: 58 cm VH 30 190 N
VH 30 190 VZ VHGT 60 190 14 VH 45 190 N
VH 45 190 VZ 39,5
VHGTI 60 190 14 VH 50 190 N
VH 60 190 N
110,9
110,9
79,25

79,25 150,65

36.04 T: 58 cm
VHGT 60 190 14 Z
VHGTI 60 190 14 Z

Tall utility units 150,65

39,5

36.02 T: 58 cm 36.04 T: 58 cm
VH 45 190 HW 26,25 VHGT 60 190 16 K
VH 50 190 HW VHGTI 60 190 16 K
VH 60 190 HW
110,9
97,65

79,25 66,0

36.02 T: 58 / 68 cm 36.04 T: 58 cm
VH 45 190 GA IZ VHGT 60 190 10D7
VH 50 190 GA IZ VHGTI 60 190
VH 60 190 GA IZ 10 D7
110,9 110,9
190.65 cm
Tall units

79,25 79,25

36.02 T: 48 / 58 cm 36.04 T: 58 cm
VH 45 190 SH IS VHGT 60 190 18
VH 50 190 SH IS VHGTI 60 190 18
VH 60 190 SH IS
36. 110,9 110,9

79,25 79,25

36.04 T: 68 cm
VHG 70 190 68
WM
110,9
79,25

36. 1/2022
 Price group
Tall units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Storage unit Front line 80 cm
1 door strapped together or door VH30190 L/R 30 494 509 549 592 709 826 909 977
1 fixed shelf VH45190 L/R 45 518 547 599 655 771 890 978 1056
5 adjustable shelves VH50190 L/R 50 525 568 614 678 796 912 1036 1114
VH60190 L/R 60 559 592 645 716 854 994 1105 1188
110,9

79,25

Diagram shows L

Tall storage unit Front line 80 cm

1 door VH45190SZ2 L/R 45 860 897 960 1042 1206 1387 1486 1606
3 adjustable shelves VH50190SZ2 L/R 50 876 918 977 1067 1234 1418 1523 1641
1 fixed shelf VH60190SZ2 L/R 60 902 953 1014 1106 1289 1468 1592 1713
110,9
1 drawer
13,0 2 pullouts Example modular parts list
26,25 VHM60190
MO60111T
39,5
MU6080SZ2
Diagram shows L

Tall storage unit Front line 80 cm

1 door strapped together or door VH30190IZ4 L/R 30 1086 1102 1177 1216 1334 1452 1510 1586
2 adjustable shelves VH45190IZ4 L/R 45 1090 1119 1186 1244 1360 1472 1562 1639
2 inner pullouts VH50190IZ4 L/R 50 1094 1137 1196 1275 1385 1492 1616 1692
110,9
1 fixed shelf VH60190IZ4 L/R 60 1123 1165 1233 1311 1440 1569 1680 1764
2 inner pullouts

79,25
Exchange wide angle hinge ANIGE 0
Diagram shows L through standard hinge, with spacer strip

Pharmacy tall unit Front one-piece

1 large capacity pullout with front panel VH30190GVZE 30 910 924 965 1008 1125 1242 1325 1393
guided on 2 pullouts and VH45190GVZE 45 959 987 1039 1095 1212 1331 1419 1496
1 drawer
Cupboard width 30, 45 cm:
3 inner drawers
Not available in IOS-C, IOS-M-C, SOLID-C, VALAIS-C
1 fixed shelf

Max. loading 20 kg per pullout / drawer.

190,4
Due to the possible weight load, please include a
recessed handle on both carcase sides.

Pharmacy tall unit Front line 80 cm

1 pullout with pullout and VH30190GVZ2 30 910 924 965 1008 1125 1242 1325 1393
drawer connection VH45190GVZ2 45 959 987 1039 1095 1212 1331 1419 1496
1 fixed shelf VH50190GVZ2 50 978 1021 1067 1131 1249 1365 1489 1567
110,9 2 inner drawers VH60190GVZ2 60 999 1032 1085 1155 1294 1433 1545 1628
1 pullout
1 fixed shelf
79,25 1 inner drawer

Max. loading 20 kg per pullout / drawer.

Due to the possible weight load, please include a
recessed handle on both carcase sides.

Storage unit Front line 80 cm

1 large capacity pullout with front panels VH30190VZ 30 1027 1044 1091 1134 1299 1405 1488 1559
6 adjustable wire baskets with glass bottoms VH45190VZ 45 1134 1163 1218 1304 1466 1562 1653 1731

Max. loading 15 kg per basket.

110,9

79,25

VZ-premium equipment MPVZ30P6 140

Frame inside faced in carcase style MPVZ45P6 196
6 adjustable shelves with glass sides

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 36.01
 Price group
Tall utility units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 48 cm Cupboard depth 68 cm (extra charge 52 pts)
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall utility unit Front line 80 cm
1 door strapped together or door VH45190HW L/R 45 468 499 566 625 733 838 931 1005
1 fixed shelf (depth 41.7 cm) VH50190HW L/R 50 476 519 579 648 755 863 982 1062
1 adjustable function shelf with railing VH60190HW L/R 60 512 553 610 681 810 939 1051 1137
(depth 31 cm)
110,9
1 hose holder and 3 clamping hooks
2 adjustable shelves (depth 28 cm)
79,25

Diagram shows L

Package vertical shelf HWV 55

1 centre panel next to hinged side,
on two-door cupboards left
Shelf height 160 cm
Shelf width 18.4 cm
Installed in tall utility unit

Available from cupboard height 190 cm and from

cupboard width 50 cm.
Combination with package waste depot possible.

Package waste depot HWWD 111

1 frame with lid for waste bags
at side opposite hinged side,
on two-door cupboards right
1 cloth bag

Combination with package vertical shelf from cupboard

width 50 cm possible.

Package drinks crates storage HW60GA2 77

2 racks for drinks crates made of steel tubing
for fitting in crockery- or utility unit
on site

When used in the utility unit, function shelf, hose rack

and clamping hook are dispensed with in favour of an
adjustable shelf.

Tall wardrobe unit Front line 80 cm

1 door strapped together or door VH45190GAIZ L/R 45 505 534 585 641 758 877 965 1042
1 clothes rail VH50190GAIZ L/R 50 524 567 613 677 795 911 1035 1113
1 fixed shelf VH60190GAIZ L/R 60 549 582 634 704 844 983 1095 1178
1 inner pullout with metal frame
110,9

79,25

Diagram shows L

Shelf above the clothes rail ANGABO 22

1 fixed shelf above the clothes rail

Shelf 27 cm from carcase upper edge.

Mirror GASP 40
35 x 100 cm
Mirror adhesive tape for applying to
rear of the door on site

Tall shoe unit Front line 80 cm

1 door strapped together or door VH45190SHIS L/R 45 594 622 674 730 847 966 1054 1131
4 adjustable shoe racks VH50190SHIS L/R 50 621 664 710 774 892 1008 1132 1210
2 adjustable shelves VH60190SHIS L/R 60 650 682 735 805 945 1084 1195 1278
1 fixed shelf
110,9
1 inner drawer

79,25

Diagram shows L

36.02 1/2022
 Price group
Housing units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit VHG601906 L/R 60 478 499 553 612 723 831 969 1049
1 door
39,5
1 adjustable shelf Modular parts list
1 appliance niche 57-60 cm VHGM60190
1 door MO6040T
2 adjustable shelves MGN6071
MU6080T
For ovens.
79,25

Diagram shows L

Housing unit VHG601906SZ2 L/R 60 826 866 938 1021 1213 1402 1567 1677
1 door
39,5
1 adjustable shelf Modular parts list
1 appliance niche 57-60 cm VHGM60190
1 drawer MO6040T
13,0 2 pullouts MGN6071
26,25 MU6080SZ2
For ovens.
39,5

Diagram shows L

Housing unit VHG6019011DK L/R 60 440 468 511 563 662 760 867 950
26,25
1 top hinged door
1 appliance double niche 96-108 cm Modular parts list
1 door VHGM60190
1 adjustable shelf MO6027K
MGN60110D
For microwave (built-in trim kit will be necessary) MU6053T
and oven.
52,75

Diagram shows L

Housing unit VHG6019011DKZ2 60 699 732 779 845 947 1051 1243 1307
26,25
1 top hinged door
1 appliance double niche 96-108 cm Modular parts list
2 pullouts VHGM60190
MO6027K
For microwave (built-in trim kit will be necessary) MGN60110D
and oven. MU6053Z2
26,25
26,25

Housing unit VHGT6019012Z L/R 60 612 646 719 809 950 1095 1241 1334
1 door
39,5
1 adjustable shelf with integral ventilation
1 door for appliance niche 122 cm VHGTI6019012Z L/R 60 612 646 719 809 950 1095 1241 1334
1 pullout
Modular parts list
For integrated fridge and freezer. VHGM60190
124,15
MO6040T
26,25
MGT60125
Diagram shows L
MU6027Z

Housing unit VHGT6019014 L/R 60 471 495 562 635 754 874 971 1036
1 door
39,5
1 adjustable shelf with integral ventilation
1 door for appliance niche 140 cm VHGTI6019014 L/R 60 471 495 562 635 754 874 971 1036

For integrated fridge and freezer. Modular parts list

VHGM60190
MO6040T
150,65
MGT60151
Diagram shows L

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

1/2022 36.03
 Price group
Housing units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit VHGT6019014Z L/R 60 586 613 680 755 880 1002 1104 1169
1 door for appliance niche 140 cm
1 pullout with integral ventilation
VHGTI6019014Z L/R 60 586 613 680 755 880 1002 1104 1169
For integrated fridge and freezer.
Modular parts list
150,65 VHGM60190
MGT60151
39,5
MU6040Z
Diagram shows L

Housing unit VHGT6019016K L/R 60 505 529 592 665 783 902 992 1057
26,25
1 top hinged door
2 doors or 1 door strapped together or with integral ventilation
1 door for appliance niche 158 cm VHGTI6019016K L/R 60 505 529 592 665 783 902 992 1057

97,65 For integrated fridge and freezer. Modular parts list

VHGM60190
MO6027K
66,0
MGT60164
Diagram shows L

Housing unit Front line 80 cm

2 doors for appliance niche VHGT6019010D7 L/R 60 481 520 591 680 801 917 1050 1130
top 103 cm and bottom 72 cm
with integral ventilation

110,9
For integrated fridge and freezer. Front line 80 cm
VHGTI6019010D7 L/R 60 481 520 591 680 801 917 1050 1130

Modular parts list

79,25
VHGM60190
Diagram shows L MGT60111
MGT6080

Housing unit Front line 80 cm

2 doors or 1 door strapped together or VHGT6019018 L/R 60 506 556 643 760 848 936 1037 1119
1 door for appliance niche 178 cm
1 support hinge SSCH with integral ventilation

110,9
when the front projects more than 26 cm Front line 80 cm
from the appliance VHGTI6019018 L/R 60 506 556 643 760 848 936 1037 1119

For integrated fridge and freezer. Modular parts list

79,25
VHGM60190
Diagram shows L MGT601908

Washing machine housing unit Front line 80 cm

depth 68 cm VHG7019068WM L/R 70 506 548 612 754 844 934 1044 1127
1 door strapped together or door
Not available in IOS-C, IOS-M-C
1 loose construction shelf
110,9

1 plinth platform

Please state plinth height.

AN TU 85 and VB not possible due to missing
79,25

ventilation!
Cupboard is supplied unassembled.
Diagram shows L
For 2 appliances max.

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

36.04 1/2022
 Price group
Slide-away doors tall units
Carcase height 190.65 cm, cupboard depth 68 cm

Neutral
Please note planning instructions on page 3.03!
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Slide-away door housing unit Basic type
1 door strapped together or door Front line 80 cm
with slide-away facility VHVG7019068GS L/R 70 3074 3102 3158 3226 3381 3535 3615 3849
1 or 2 adjustable shelves
110,9 (according to appliance niche height) Extra charge interior
1 fixed shelf MPK/KH/KG 0
1 appliance niche MPFF/PF/VM 402
79,25 1 niche for dishwasher MPFS/ME 589
1 plinth cover in front of dishwasher MPFG 923
Diagram shows L
in carcase interior colour MPH 719
1 safety box SBOX 230
Not available in IOS-C, IOS-M-C
Max. 3 appliance connection of
3.6 kw total.
Always state interior style,
possible colours see chapter 11!

Note cupboard depth 68 cm!

Dishwasher front GFV 60 .. or GFT 60 ..
must be ordered separately from the main list.
Please state appliance model on order!

Slide-away door housing unit Basic type

1 door strapped together or door Front line 80 cm
with slide-away facility VHVG7019068 L/R 70 3167 3194 3251 3324 3492 3657 3737 3975
1 or 2 adjustable shelves
110,9 (according to appliance niche height) Extra charge interior
1 fixed shelf MPK/KH/KG 0
1 appliance niche MPFF/PF/VM 402
79,25 2 inner pullouts MPFS/ME 589
1 safety box SBOX 230 MPFG 923
Diagram shows L
Max. 3 appliance connection of MPH 719
3.6 kw total.
Not available in IOS-C, IOS-M-C
Always state interior style,
possible colours see chapter 11!

Note cupboard depth 68 cm!

Slide-away door washing machine Basic type

housing unit Front line 80 cm
1 door strapped together or door VHVG7019068WM L/R 70 2364 2389 2464 2543 2628 2717 2779 2957
with slide-away facility
110,9 1 construction shelf with fixings Extra charge interior
1 plinth platform MPK/KH/KG 0
Always state interior style, MPFF/PF/VM 402
79,25 possible colours see chapter 11! MPFS/ME 589
MPFG 923
Diagram shows L
Note cupboard depth 68 cm! MPH 719
AN TU 85 and VB not possible due to missing
Not available in IOS-C, IOS-M-C
ventilation!
Please state plinth height and appliance height.
For 2 appliances max.

All heat generating appliances planned behind a closed door must, for safety reasons, be connected to a safety box! The safety box activates on accidental
closing of the door on a working heat generating appliance and switches this off after 90 seconds. A warning signal will sound within this time span.

1/2022 36.05
 Surface style
Accessories for slide-away doors cupboards Descriptions / colours see chapter 11.

Extension components

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME FG MC H
Pullout tray For cupboard width 70 cm
for slide-away doors cupboards HVTAF70 70 302 302 417 481 518 573 501
Extendible with lock
Factory installed above fixed shelf,
for top cupboards above lower shelf
Pullout size: 60 x 50 cm

Tray is installed between cupboard sides.

Please state required colour and surface style.
Max. load 30 kg.
Pullout path 45 cm.

LED-Linear-interior lighting 5 watt

Connected wattage 5 W HV70LE 70 101
1 light with LED-strip
integrated in the top
Light temperature 4000K or variable of
2700 to 6400K with dimmer possible
1 extension cable 4 pole, 200 cm
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

The light can be operated either with the power

supply set S24 4000K or with the dynamic light
control S24 DL .. .
Order optional switch BZS, FZS or HSSC.

Socket insert STE 61

with 3 sockets
For Great Britain
STEGB 76
For France
STEFR 76
For Switzerland
STECH 82
For USA
STEUS 112

Extension of power input MPSBOX400 74

SBOX 230 included in standard delivery
is replaced by SBOX 400 for 3-phase
connection
1 automatic shut-off for the connection of
400 V or 230/240 V electrical appliances
1 door contact switch for controlling
Connection:
a) Input
- 5 pin power cable, 2.5 meter long
(connection to cooker connection box)
- Connecting to three phases
- Fuse protection on site max. 16 A per phase
b) Output
- 5 pin cable with free ends 2.5 m long

Mains voltage 230-240 V or 400 V, 50/60 HZ.

In a 400 V connection, appliances with a power consumption of up to 6000 VA can be connected.
When connecting 230/240 V appliances, a maximum power consumption of 3.6 kw per phase is possible.
Connection only by qualified electrician!
Important information about the connection possibilities can be found in the Internet: www.leicht.com on your
dealer page under „technical info“.

36.06 1/2022
 Price group
Corner tall units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Corner tall unit .
with connection to floor or
wall units Front line 80 cm
Planning depth 65 cm Door width 50 cm
Actual space 115 (110 up to 140 cm) VHEE115190ULM L/R 100 2153 2209 2332 2483 2678 2868 3091 3238
110,9 Door width 60 cm
Actual space 125 (120 up to 140 cm) VHEE125190ULM L/R 100 2281 2341 2472 2639 2841 3039 3265 3416
1 door strapped together or door
79,25 1 fixed shelf
4 height adjustable swing-out shelves
Diagram shows L
with chromium plated railing
Actual space 4 rotating shelf cushionings
for installation on site
100
1 fixed adjustment blender
Pl.depth

56

9 including blenders TPEE780 7 0 0 0 0 0 0 0 0

Door width OPEE753 7 0 0 0 0 0 0 0 0
Extra charge per 5 cm additional MPTP5 5 5 7 7 8 11 13 13 14
width (up to max. 20 cm)

It is essential to state blender-height for the

connecting floor and wall unit.
The cupboard has knock down fittings and
can be dismantled for access.

Corner tall unit .

with connection to tall units of the
same height Front line 80 cm
Planning depth 65 cm Door width 50 cm
Actual space 115 (110 up to 126 cm) VHEE115190HLM L/R 100 2141 2199 2301 2424 2583 2743 2920 3039
110,9 Door width 60 cm
Actual space 125 (120 up to 136 cm) VHEE125190HLM L/R 100 2269 2331 2441 2580 2746 2914 3094 3217
1 door strapped together or door
79,25 1 fixed shelf
4 height adjustable swing-out shelves
Diagram shows L
with chromium plated railing
Actual space 4 rotating shelf cushionings
for installation on site
100
1 inner blender with angle blender HPEEW9190 9 0 0 0 0 0 0 0 0
Pl.depth

56
adjustable from 4 to 10 cm
9
Door width Extra charge per 5 cm additional MPHP5 5 24 26 26 27 34 38 39 42
width (up to max. 20 cm)

The cupboard has knock down fittings and

can be dismantled for access.
Please note: when placing an order, it is imperative
to specify the actual floor measurement, the angle
blender HPEEW 9 .. is adapted at factory.

1/2022 36.07
 Price group
Function tall units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Storage-Centre Front line 80 cm
1 door strapped together or door VH50190VC L/R 50 1222 1281 1331 1395 1532 1670 1790 1866
with wide angle hinges VH60190VC L/R 60 1270 1327 1388 1455 1601 1746 1892 1977
1 lattice with 5 hanging baskets
110,9 3 hooks (adjustable)
1 swing out fitment with 4 fixed shelves
and wire surround
2 fixed shelves
79,25
1 stainless steel floor protection
Diagram shows L with textured surface
3 adjustable shelves (depth 17 cm)
1 removable basket

Cookware-Centre Front line 80 cm

1 door strapped together or door VH60190VT L/R 60 1095 1156 1218 1352 1440 1527 1644 1720
with wide angle hinges
1 vario grid with 4 lid holders
and 1 suspended basket
110,9
3 utility cupboard battens with
9 hooks (adjustable)
2 adjustable shelves (depth 27.2 cm)
79,25
2 fixed shelves (depth 45 cm)
Diagram shows L 1 inner drawer (depth 40 cm)
1 vertical compartment
2 adjustable shelves (depth 34 cm)

Vertical compartment always opposite hinged side.

LED-Linear-interior lighting VT60LE 316

1 light with LED-strip
integrated in the top
1 light with LED-strip
integrated in shelf above
the appliance niche
Light temperature 4000K, neutral white
1 adapter 240 volt 50 HZ, 24 volt,
40 watt
1 distributor for constant 4000K
2 extension cables 4 pole, 200 cm
1 HSSC sensor switch
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

Socket insert STE 61

with 3 sockets
For Great Britain
STEGB 76
For France
STEFR 76
For Switzerland
STECH 82
For USA
STEUS 112

Niche door Front line 80 cm

1 door strapped together or door VH30190N L/R 30 396 425 467 547 614 679 771 856
with attached plinth VH45190N L/R 45 420 443 496 575 659 744 825 913
no rear panel VH50190N L/R 50 426 459 512 614 704 795 891 982
no floor VH60190N L/R 60 446 475 539 646 747 844 966 1065
110,9

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
79,25

Diagram shows L

If planned into corner, blender of 15-20 cm is necessary.

Do not plan next to projecting cupboards.

36.08 1/2022
 Price group
Interior+ tall units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Interior+ base tall unit Front line 80 cm
1 door strapped together or door VH50190I L/R 50 525 571 630 749 830 912 1036 1114
1 fixed shelf (depth 35.7 cm) VH60190I L/R 60 560 604 669 812 903 994 1105 1188
5 adjustable shelves, depth 34.7 cm
additional Interior+ swing-out frame
110,9
essential

Wide angle hinges cannot be used.

79,25 Width and height alterations are not possible.
Diagram shows L

Interior+ swing-out frame For cupboard width 50 cm

1 swing-out frame with: IP50190 1280
4 adjustable profile shelves For cupboard width 60 cm
9 railings IP60190 1345
1 fixed railing side

Possible accessories
precise description see page 90.34.

Interior+ shelf IP50B 50 155

IP60B 60 160

Interior+ railing IP50R 50 73

IP60R 60 74

Interior+ glass jar set IPGD3 72

IPGD4 94

Interior+ container IP1423C 67

IP1435C 67

Price group
End tall units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 cm
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
End tall unit Basic type
1 composition angled door or angled door Front line 80 cm
3 fixed glass shelves Cupboard depth 36 cm
1 fixed shelf VHAW3019036 L/R 30 1184 1229 1311 1471 1609 1745 1892 2021
2 fixed glass shelves Carcase depth 56 cm
110,9 Always state interior style, VHAW30190 L/R 30 1237 1286 1372 1539 1682 1826 1978 2112
possible colours see chapter 11!
Extra charge interior
79,25 MPK/KH/KG 0
Diagram shows R MPFF/PF/VM 107
MPFS/ME 156
MPFG 245
MPH 261
Not available in ALURO-C, BOSSA-C, CONCRETE-A, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-A,
STEEL-C, STONE-A, STONE-C, VALAIS-C

LED-Linear-interior lighting For depth 36 cm

1 light with LED-strip HAW36LE 212
integrated in the top
1 light with LED-strip For depth 58 cm
integrated in fixed shelf HAW58LE 236
Light temperature 4000K, neutral white
1 adapter 240 volt 50 HZ, 24 volt,
40 watt
1 distributor for constant 4000K
2 extension cables 4 pole, 200 cm
1 HSSC sensor switch
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

1/2022 36.09
 Price group
End tall units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 cm
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
End tall unit Basic type
with glass insert Front line 80 cm
39,5 1 composition angled door Cupboard depth 36 cm
with glass part 71 cm high VHAW3019036PG L/R 30 1421 1469 1551 1709 1850 1989 2136 2281
above front line 80 cm Carcase depth 56 cm
71,65 4 fixed glass shelves VHAW30190PG L/R 30 1474 1524 1609 1775 1922 2069 2223 2373
2 fixed shelves
Always state interior style, Extra charge interior
79,25 possible colours see chapter 11! MPK/KH/KG 0
Diagram shows R MPFF/PF/VM 107
MPFS/ME 156
MPFG 245
MPH 261
Not available in ALURO-C, BOSSA-C, CONCRETE-A, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-A,
STEEL-C, STONE-A, STONE-C, VALAIS-C

LED-Linear-interior lighting For depth 36 cm / 3 watt

Connected wattage 3 or 5 W HAG36LE 66
1 light with LED-strip
integrated in fixed shelf For depth 58 cm / 5 watt
above glass niche HAG58LE 91
Light temperature 4000K or variable of
2700 to 6400K with dimmer possible
1 extension cable 4 pole, 200 cm
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

The light can be operated either with the power

supply set S24 4000K or with the dynamic light
control S24 DL .. .
Order optional switch BZS or FZS.
Additional HAW .. LE possible for
total illumination!

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 190.65 cm
Side depth 34 cm FS19034 L/R 34 0 0 129 186 267 335 176
Side depth 46 cm FS19046 L/R 46 0 0 149 217 314 392 208
Side depth 56 cm FS19056 L/R 56 0 0 149 217 314 392 208
Side depth 61 cm FS19061 L/R 61 0 0 172 250 360 451 238
Side depth 66 cm FS19066 L/R 66 0 0 172 250 360 451 238
Side depth 76 cm FS19076 L/R 76 0 0 182 264 382 479 252
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

36.10 1/2022
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side with .
depth increase
Carcase height 190.65 cm
Side depth up to 34 cm FSUEL19034 L/R 34 92 92 221 278 359 427 268
Side depth up to 46 cm FSUEL19046 L/R 46 92 92 241 309 406 484 300
Side depth up to 58 cm FSUEL19058 L/R 58 92 92 241 309 406 484 300
Side depth up to 63 cm FSUEL19063 L/R 63 92 92 264 342 452 543 330
Side depth up to 68 cm FSUEL19068 L/R 68 146 146 318 396 506 597 384
Side depth up to 76 cm FSUEL19076 L/R 76 146 146 328 410 528 625 398
Diagram shows R

Leading edge as carcase exterior side.

Price group
Blenders

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 190.65 cm
Front finish HP20190 L/R 20 95 102 111 117 129 143 148 159

Front finish blenders are manufactured with a maximum

20 cm width. Please make up larger dimension blenders
from rear panels in front finish RWF .. .
Programmes SOLID-C and VALAIS-C in divided
190,4 style (front line 80 cm).

Diagram shows L

Tall unit corner blender 90° Carcase height 190.65 cm

Front finish HPE190 10 194 218 229 240 270 295 304 333
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Please note: With use of handles deeper than

3 cm, the relevant leg length must be at least
190,4 7 cm. See sketch.
Flush with front.
7 Please state rear length (inside measurement)
from l to r on order.
Programmes SOLID-C and VALAIS-C in divided
7

style (front line 80 cm).

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)
Tall unit corner blender Carcase height 190.65 cm
Front finish HPEW190 10 201 223 235 242 273 298 307 335
Freely selectable angle up to max. 270°
Not available in IOS-C, IOS-M-C
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width

190,4 Flush with front.

Please state rear length (inside measurement)
3 from l to r on order.
Programmes SOLID-C and VALAIS-C in divided
3

style (front line 80 cm).

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

1/2022 36.11
 Price group
Blenders

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Divided blender .
available for HP.., HPE.. and HPEW..

Division of blender at 79.5 cm height MPPGT80 39

MP PGT 80
Division of blender at 66.25 cm height MPPGT66 39
MP PGT 66
MP PGT 53 Division of blender at 53.0 cm height MPPGT53 39

Several divisions are possible.

Example: 1x HPE 204

1x MP PGT 80
MP PGT 80 1x MP PGT 53
MP PGT 53

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 190.65 cm
flush with carcase HSB20190 20 53 55 68 87 94 101 118 81

Price group
Rear panels
Front finish
Neutral

A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 80 cm
in variable sizes RWF190 392 455 554 669 845 1020 1164 1308
110,9
Height up to 190.4 cm
Max. width 120 cm Not available in IOS-C, IOS-M-C
with loose plinth
79,25
Minimum charged 0.5 metres.

Rear panel in Front line 80 cm

front finish RWF30190 30 203 224 266 307 399 489 551 627
in fixed front sizes RWF45190 45 216 240 296 353 443 530 601 681
with loose plinth RWF50190 50 218 251 307 371 468 567 646 728
110,9
For carcase height 190.65 cm RWF60190 60 231 275 326 398 515 631 712 798
old RW .. 190

79,25

36.12 1/2022
Tall units with vertical recessed handles
Tall units, carcase height 203.9 cm

CARCASE LINE 80

Tall units 37. 01

Tall utility units 37. 02

Housing units 37. 03-04

Appliance fronts for large capacity appliances 37. 05

Slide-away doors tall units 37. 06

Accessories for slide-away doors cupboards 37. 07

Corner tall units 37. 08

Function tall units 37. 09

Interior+ tall units 37. 10

End tall units 37. 10-11

Visible carcase sides 37. 11-12

Blenders 37. 12-13

Blenders 37. 13

Rear panels 37. 14

203.9 cm
Tall units

37.

1/2022 37.
 Tall units with vertical recessed handles
Tall units, carcase height 203.9 cm
T: Cupboard depth cm

Tall units Housing units Appliance fronts Corner units Interior+

37.01 37.03 37.05 37.08 37.10

T: 36 / 48 / 58 cm T: 58 cm VGF 46 204 T: 58 cm T: 58 cm
VH 30 204 VHG 60 204 5 VGF 61 204 VHEE 115 204 ULM VH 50 204 I
VH 45 204 66,0 VGF 76 204 VHEE 125 204 ULM VH 60 204 I
VH 50 204 VGF 91 204
124,15 VH 60 204 124,15
124,15 124,15

79,25
79,25 79,25 79,25 79,25

37.01 37.03 37.05 37.08

T: 36 / 48 / 58 cm T: 58 cm VGFR 46 204 E T: 58 cm
VH 45 204 SZ2 VHG 60 204 6 VGFR 61 204 E VHEE 115 204 HLM
VH 50 204 SZ2 52,75 VGFR 76 204 E VHEE 125 204 HLM
VH 60 204 SZ2
124,15 124,15
13,0
26,25 Angle cupboards
203,65
39,5 79,25 79,25

37.01 37.03 37.05 37.10

T: 36 / 48 / 58 cm T: 58 cm VGF 76 204 Z T: 36 / 58 cm
VH 30 204 IZ4 VHG 60 204 6 SZ2 VGF 91 204 Z VHAW 30 204
VH 45 204 IZ4 52,75
VH 50 204 IZ4
124,15 VH 60 204 IZ4 13,0 124,15
26,25
52,1
Function cupboards
77,6
79,25 39,5 79,25

37.01 37.03 37.05 37.09 37.11

T: 36 / 48 / 58 cm T: 58 cm VGF 76 204 Z2 T: 58 cm T: 36 / 58 cm
VH 30 204 GVZE 39,5
VHG 60 204 11D VGF 91 204 Z2 VH 50 204 VC VHAW 30 204 PG
VH 45 204 GVZE VH 60 204 VC 52,75

124,15
71,65
34,1 / 34,5

42,6
203,65 52,75 79,25 79,25

37.01 T: 36 / 48 / 58 cm 37.03 T: 58 cm 37.09 T: 58 cm

VH 30 204 GVZ2 VHG 60 204 11D VH 60 204 VT
VH 45 204 GVZ2 39,5
Z2
VH 50 204 GVZ2
124,15 VH 60 204 GVZ2 124,15

26,25
Slide-away doors cupboards
79,25 26,25 79,25

37.01 37.03 37.06 37.09

T: 58 cm T: 58 cm T: 68 cm VH 30 204 N
VH 30 204 VZ VHG 60 204 11D Z VHVG 70 204 VH 45 204 N
VH 45 204 VZ 52,75 68 GS VH 50 204 N
VH 60 204 N
124,15
124,15
124,15
79,25

79,25
79,25 39,5

37.04 T: 58 cm 37.06 T: 68 cm
VHGT 60 204 12 Z VHVG 70 204 68
52,75 VHGTI 60 204 12 Z
124,15

Tall utility units 124,15

79,25
26,25

37.02 T: 58 cm 37.04 T: 58 cm 37.06 T: 68 cm

VH 45 204 HW VHGT 60 204 14 VHVG 70 204 68
VH 50 204 HW 52,75 VHGTI 60 204 14 WM
VH 60 204 HW
124,15
124,15

79,25
79,25 150,65

37.02 T: 58 / 68 cm 37.04 T: 58 cm
VH 45 204 GA IZ 26,25
VHGT 60 204 14 Z
VH 50 204 GA IZ VHGTI 60 204 14 Z
VH 60 204 GA IZ
124,15

150,65
79,25 26,25

37.02 T: 48 / 58 cm 37.04 T: 58 cm
VH 45 204 SH IS VHGT 60 204 18
VH 50 204 SH IS VHGTI 60 204 18
VH 60 204 SH IS
124,15
124,15

79,25 79,25

37.04 T: 68 cm
VHG 70 204 68
WM
203.9 cm
Tall units

124,15
79,25

37.

37. 1/2022
 Price group
Tall units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Storage unit Front line 80 cm
1 door strapped together or door VH30204 L/R 30 513 540 583 628 739 850 942 1013
1 fixed shelf VH45204 L/R 45 536 565 633 694 807 917 1020 1094
5 adjustable shelves VH50204 L/R 50 545 586 653 723 834 947 1074 1156
VH60204 L/R 60 579 624 689 761 894 1027 1146 1235
124,15

79,25

Diagram shows L

Tall storage unit Front line 80 cm

1 door VH45204SZ2 L/R 45 891 931 999 1080 1240 1419 1524 1645
3 adjustable shelves VH50204SZ2 L/R 50 908 952 1016 1104 1268 1448 1561 1682
1 fixed shelf VH60204SZ2 L/R 60 938 992 1059 1151 1327 1503 1634 1756
1 drawer
124,15 2 pullouts Example modular parts list
13,0 VHM50204
26,25 MO50125T
39,5 MU5080SZ2

Diagram shows L

Tall storage unit Front line 80 cm

1 door strapped together or door VH30204IZ4 L/R 30 1098 1115 1195 1253 1367 1482 1552 1620
2 adjustable shelves VH45204IZ4 L/R 45 1103 1132 1205 1276 1389 1500 1599 1675
2 inner pullouts VH50204IZ4 L/R 50 1108 1149 1215 1299 1409 1519 1647 1731
1 fixed shelf VH60204IZ4 L/R 60 1135 1181 1253 1347 1471 1593 1716 1801
124,15 2 inner pullouts

79,25 Exchange wide angle hinge ANIGE 0

through standard hinge, with spacer strip
Diagram shows L

Pharmacy tall unit Front one-piece

1 large capacity pullout with front panel VH30204GVZE 30 918 945 989 1033 1145 1255 1347 1419
guided on 2 pullouts and VH45204GVZE 45 970 999 1067 1128 1241 1351 1454 1528
1 drawer
Cupboard width 30, 45 cm:
3 inner drawers
Not available in IOS-C, IOS-M-C, SOLID-C, VALAIS-C
1 fixed shelf

Max. loading 20 kg per pullout / drawer.

203,65 Due to the possible weight load, please include a
recessed handle on both carcase sides.

Pharmacy tall unit Front line 80 cm

1 pullout with pullout and VH30204GVZ2 30 918 945 989 1033 1145 1255 1347 1419
drawer connection VH45204GVZ2 45 970 999 1067 1128 1241 1351 1454 1528
1 fixed shelf VH50204GVZ2 50 990 1031 1098 1167 1279 1392 1519 1601
2 inner drawers VH60204GVZ2 60 1009 1054 1119 1191 1325 1457 1576 1665
124,15 1 pullout
1 fixed shelf
1 inner drawer
79,25
Max. loading 20 kg per pullout / drawer.
Due to the possible weight load, please include a
recessed handle on both carcase sides.

Storage unit Front line 80 cm

1 large capacity pullout with front panels VH30204VZ 30 1030 1047 1094 1163 1334 1463 1554 1624
6 adjustable wire baskets with glass bottoms VH45204VZ 45 1168 1197 1245 1307 1483 1625 1727 1802

Max. loading 15 kg per basket.

124,15

79,25
VZ-premium equipment MPVZ30P6 140
Frame inside faced in carcase style MPVZ45P6 196
6 adjustable shelves with glass sides

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 37.01
 Price group
Tall utility units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 48 cm Cupboard depth 68 cm (extra charge 52 pts)
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall utility unit Front line 80 cm
1 door strapped together or door VH45204HW L/R 45 483 514 583 663 763 865 967 1045
1 adjustable shelf VH50204HW L/R 50 493 533 601 691 792 890 1021 1101
1 fixed shelf (depth 41.7 cm) VH60204HW L/R 60 524 571 643 728 850 972 1093 1181
1 adjustable function shelf with railing
124,15 (depth 31 cm)
1 hose holder and 3 clamping hooks
2 adjustable shelves (depth 28 cm)
79,25

Diagram shows L

Package vertical shelf HWV 55

1 centre panel next to hinged side,
on two-door cupboards left
Shelf height 160 cm
Shelf width 18.4 cm
Installed in tall utility unit

Available from cupboard height 190 cm and from

cupboard width 50 cm.
Combination with package waste depot possible.

Package waste depot HWWD 111

1 frame with lid for waste bags
at side opposite hinged side,
on two-door cupboards right
1 cloth bag

Combination with package vertical shelf from cupboard

width 50 cm possible.

Package drinks crates storage HW60GA2 77

2 racks for drinks crates made of steel tubing
for fitting in crockery- or utility unit
on site

When used in the utility unit, function shelf, hose rack

and clamping hook are dispensed with in favour of an
adjustable shelf.

Tall wardrobe unit Front line 80 cm

1 door strapped together or door VH45204GAIZ L/R 45 522 550 619 680 793 904 1005 1079
1 clothes rail VH50204GAIZ L/R 50 535 576 643 712 824 937 1064 1146
1 fixed shelf VH60204GAIZ L/R 60 558 604 669 741 875 1006 1126 1215
1 inner pullout with metal frame
124,15

79,25

Diagram shows L

Shelf above the clothes rail ANGABO 22

1 fixed shelf above the clothes rail

Shelf 27 cm from carcase upper edge.

Mirror GASP 40
35 x 100 cm
Mirror adhesive tape for applying to
rear of the door on site

Tall shoe unit Front line 80 cm

1 door strapped together or door VH45204SHIS L/R 45 611 640 708 769 882 993 1095 1169
4 adjustable shoe racks VH50204SHIS L/R 50 631 672 739 809 920 1033 1160 1243
2 adjustable shelves VH60204SHIS L/R 60 659 703 768 841 974 1106 1225 1315
1 fixed shelf
124,15 1 inner drawer

79,25

Diagram shows L

37.02 1/2022
 Price group
Housing units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit Front line 80 cm
1 door VHG602045 L/R 60 533 553 609 674 797 919 1056 1141
2 adjustable shelves
66,0
1 appliance niche 44-56 cm Modular parts list
1 door VHGM60204
2 adjustable shelves MO6066T
MGN6058
For ovens, microwaves, steam cookers or automatic MU6080T
79,25 coffee machines.

Diagram shows L

Housing unit Front line 80 cm

1 door VHG602046 L/R 60 499 528 580 641 762 878 997 1095
52,75 1 adjustable shelf
1 appliance niche 57-60 cm Modular parts list
1 door VHGM60204
2 adjustable shelves MO6053T
MGN6071
For ovens. MU6080T
79,25

Diagram shows L

Housing unit Front line 80 cm

1 door VHG602046SZ2 L/R 60 847 895 965 1050 1252 1449 1595 1723
52,75 1 adjustable shelf
1 appliance niche 57-60 cm Modular parts list
1 drawer VHGM60204
2 pullouts MO6053T
13,0
MGN6071
26,25
For ovens. MU6080SZ2
39,5

Diagram shows L

Housing unit VHG6020411D L/R 60 443 470 519 572 677 781 899 986
1 door
39,5
1 adjustable shelf Modular parts list
1 appliance double niche 96-108 cm VHGM60204
1 door MO6040T
1 adjustable shelf MGN60110D
MU6053T
For microwave (built-in trim kit will be necessary)
52,75 and oven.

Diagram shows L

Housing unit VHG6020411DZ2 L/R 60 702 734 787 854 962 1072 1275 1343
1 door
39,5 1 adjustable shelf Modular parts list
1 appliance double niche 96-108 cm VHGM60204
2 pullouts MO6040T
MGN60110D
For microwave (built-in trim kit will be necessary) MU6053Z2
26,25 and oven.
26,25

Diagram shows L

Housing unit VHG6020411DZ L/R 60 558 588 637 692 803 909 1032 1119
1 door
52,75 1 adjustable shelf Modular parts list
1 appliance double niche 96-108 cm VHGM60204
1 pullout MO6053T
MGN60110D
For microwave (built-in trim kit will be necessary) MU6040Z
and oven.
39,5

Diagram shows L

1/2022 37.03
 Price group
Housing units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit VHGT6020412Z L/R 60 633 675 746 838 989 1142 1269 1380
1 door
52,75 1 adjustable shelf with integral ventilation
1 door for appliance niche 122 cm VHGTI6020412Z L/R 60 633 675 746 838 989 1142 1269 1380
1 pullout
Modular parts list
For integrated fridge or freezer. VHGM60204
124,15 MO6053T
26,25 MGT60125
MU6027Z
Diagram shows L

Housing unit VHGT6020414 L/R 60 492 524 589 664 793 921 999 1082
1 door
52,75 1 adjustable shelf with integral ventilation
1 door for appliance niche 140 cm VHGTI6020414 L/R 60 492 524 589 664 793 921 999 1082

For integrated fridge and freezer. Modular parts list

VHGM60204
MO6053T
150,65 MGT60151

Diagram shows L

Housing unit VHGT6020414Z L/R 60 637 671 744 834 976 1126 1252 1335
26,25
1 top hinged door
1 door for appliance niche 140 cm with integral ventilation
1 pullout VHGTI6020414Z L/R 60 637 671 744 834 976 1126 1252 1335

For integrated fridge and freezer. Modular parts list

VHGM60204
150,65 MO6027K
26,25 MGT60151
MU6027Z
Diagram shows L

Housing unit Front line 80 cm

2 doors or 1 door strapped together or VHGT6020418 L/R 60 531 579 675 796 886 976 1085 1171
1 door for appliance niche 178 cm
1 support hinge SSCH with integral ventilation
when the front projects more than 26 cm Front line 80 cm
from the appliance VHGTI6020418 L/R 60 531 579 675 796 886 976 1085 1171
124,15

For integrated fridge and freezer. Modular parts list

79,25 VHGM60204
MGT602048
Diagram shows L

Washing machine housing unit Front line 80 cm

depth 68 cm VHG7020468WM L/R 70 523 570 640 783 876 966 1085 1172
1 door strapped together or door
Not available in IOS-C, IOS-M-C
1 loose construction shelf
1 plinth platform
124,15

Please state plinth height.

AN TU 85 and VB not possible due to missing
79,25

ventilation!
Cupboard is supplied unassembled.
Diagram shows L For 2 appliances max.

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

37.04 1/2022
 Price group
Appliance fronts for large capacity appliances

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Appliance door for large capacity Front line 80 cm
appliance VGF46204 L/R 49 265 305 375 469 570 667 739 864
Hinge drill holes on site VGF61204 L/R 64 298 341 415 541 655 767 873 999
VGF76204 L/R 80 391 425 523 729 879 1027 1218 1351
Also available for SUB-ZERO 700 series, VGF91204 L/R 95 496 523 646 948 1136 1328 1619 1757
124,15 Miele and BSH appliances.
Cupboard width 49, 64, 79, 94 cm:
Not available in BOSSA-C
79,25

Cutout for dispenser AUSGT 163

width 23.1 x height 36.8 cm (BSH, Gaggenau)
Not available in IOS-C, IOS-M-C, SOLID-C
or width 23.1 x height 37.5 cm (Miele)

With a plinth higher than 10 cm, the appliance must

be raised on site.

Framed front for large capacity appliance VGFR46204E L/R 49 482 525 595 689 791 891 963 1088
Hinge drill holes on site VGFR61204E L/R 64 518 558 633 761 877 991 1095 1223
VGFR76204E L/R 80 609 643 741 949 1099 1249 1442 1574
Also available for the following appliances:
Cupboard width 49, 64, 79 cm:
in widths 46 and 61 cm SUB-ZERO 700 series,
Not available in BOSSA-C, IOS-C, IOS-M-C, SOLID-C, VALAIS-C
Miele and BSH appliances.
In width 76 cm SUB-ZERO 700 series appliances.
With a plinth higher than 10 cm, the appliance must
203,65 be raised on site.

Appliance front for large capacity VGF76204Z L/R 80 405 442 542 758 913 1068 1268 1406
appliance (1 door and 1 pullout) VGF91204Z L/R 95 518 542 671 982 1182 1380 1682 1828
Height pullout front according to
Cupboard width 79, 94 cm:
appliance manufacturer
Not available in BOSSA-C
Hinge drill holes on site

52,1

77,6

Appliance front for large capacity VGF76204Z2 L/R 80 414 451 553 772 931 1088 1291 1433
appliance (1 door and 2 pullouts) VGF91204Z2 L/R 95 526 553 686 1002 1204 1406 1714 1863
1 inner blender above appliance
Cupboard width 79, 94 cm:
Hinge drill holes on site
Not available in BOSSA-C
Liebherr appliances front heights 42.6 and 34.1 cm.
34,1 / 34,5 SUB-ZERO 700 series appliances heights 42.6 and
34.5 cm.
42,6

Please state appliance manufacturer and appliance type.

Minimum plinth height 10 cm! If necessary, smaller plinth height is also possible, depending on the appliance manufacturer.
Consider depth of appliance when planning side panels etc.
Programme TOCCO-A and TOCCO-C side with thick edges.

1/2022 37.05
 Price group
Slide-away doors tall units
Carcase height 203.9 cm, cupboard depth 68 cm

Neutral
Please note planning instructions on page 3.03!
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Slide-away door housing unit Basic type
1 door strapped together or door Front line 80 cm
with slide-away facility VHVG7020468GS L/R 70 3160 3195 3252 3320 3475 3627 3706 3944
1 or 2 adjustable shelves
(according to appliance niche height) Extra charge interior
124,15
1 fixed shelf MPK/KH/KG 0
1 appliance niche MPFF/PF/VM 402
1 niche for dishwasher MPFS/ME 589
79,25 1 plinth cover in front of dishwasher MPFG 923
in carcase interior colour MPH 719
Diagram shows L 1 safety box SBOX 230
Not available in IOS-C, IOS-M-C
Max. 3 appliance connection of
3.6 kw total.
Always state interior style,
possible colours see chapter 11!

Note cupboard depth 68 cm!

Dishwasher front GFV 60 .. or GFT 60 ..
must be ordered separately from the main list.
Please state appliance model on order!

Slide-away door housing unit Basic type

1 door strapped together or door Front line 80 cm
with slide-away facility VHVG7020468 L/R 70 3253 3288 3344 3413 3582 3747 3827 4071
1 or 2 adjustable shelves
(according to appliance niche height) Extra charge interior
124,15
1 fixed shelf MPK/KH/KG 0
1 appliance niche MPFF/PF/VM 402
2 inner pullouts MPFS/ME 589
79,25 1 safety box SBOX 230 MPFG 923
Max. 3 appliance connection of MPH 719
Diagram shows L 3.6 kw total.
Not available in IOS-C, IOS-M-C
Always state interior style,
possible colours see chapter 11!

Note cupboard depth 68 cm!

Slide-away door washing machine Basic type

housing unit Front line 80 cm
1 door strapped together or door VHVG7020468WM L/R 70 2457 2486 2559 2639 2726 2810 2870 3058
with slide-away facility
1 construction shelf with fixings Extra charge interior
124,15
1 plinth platform MPK/KH/KG 0
Always state interior style, MPFF/PF/VM 402
possible colours see chapter 11! MPFS/ME 589
79,25 MPFG 923
Note cupboard depth 68 cm! MPH 719
Diagram shows L AN TU 85 and VB not possible due to missing
Not available in IOS-C, IOS-M-C
ventilation!
Please state plinth height and appliance height.
For 2 appliances max.

All heat generating appliances planned behind a closed door must, for safety reasons, be connected to a safety box! The safety box activates on accidental
closing of the door on a working heat generating appliance and switches this off after 90 seconds. A warning signal will sound within this time span.

37.06 1/2022
 Surface style
Accessories for slide-away doors cupboards Descriptions / colours see chapter 11.

Extension components

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME FG MC H
Pullout tray For cupboard width 70 cm
for slide-away doors cupboards HVTAF70 70 302 302 417 481 518 573 501
Extendible with lock
Factory installed above fixed shelf,
for top cupboards above lower shelf
Pullout size: 60 x 50 cm

Tray is installed between cupboard sides.

Please state required colour and surface style.
Max. load 30 kg.
Pullout path 45 cm.

LED-Linear-interior lighting 5 watt

Connected wattage 5 W HV70LE 70 101
1 light with LED-strip
integrated in the top
Light temperature 4000K or variable of
2700 to 6400K with dimmer possible
1 extension cable 4 pole, 200 cm
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

The light can be operated either with the power

supply set S24 4000K or with the dynamic light
control S24 DL .. .
Order optional switch BZS, FZS or HSSC.

Socket insert STE 61

with 3 sockets
For Great Britain
STEGB 76
For France
STEFR 76
For Switzerland
STECH 82
For USA
STEUS 112

Extension of power input MPSBOX400 74

SBOX 230 included in standard delivery
is replaced by SBOX 400 for 3-phase
connection
1 automatic shut-off for the connection of
400 V or 230/240 V electrical appliances
1 door contact switch for controlling
Connection:
a) Input
- 5 pin power cable, 2.5 meter long
(connection to cooker connection box)
- Connecting to three phases
- Fuse protection on site max. 16 A per phase
b) Output
- 5 pin cable with free ends 2.5 m long

Mains voltage 230-240 V or 400 V, 50/60 HZ.

In a 400 V connection, appliances with a power consumption of up to 6000 VA can be connected.
When connecting 230/240 V appliances, a maximum power consumption of 3.6 kw per phase is possible.
Connection only by qualified electrician!
Important information about the connection possibilities can be found in the Internet: www.leicht.com on your
dealer page under „technical info“.

1/2022 37.07
 Price group
Corner tall units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Corner tall unit .
with connection to floor or
wall units Front line 80 cm
Planning depth 65 cm Door width 50 cm
Actual space 115 (110 up to 140 cm) VHEE115204ULM L/R 100 2308 2367 2491 2642 2835 3029 3245 3393
124,15 Door width 60 cm
Actual space 125 (120 up to 140 cm) VHEE125204ULM L/R 100 2436 2499 2631 2798 2998 3200 3419 3571
1 door strapped together or door
1 adjustable shelf
79,25
1 fixed shelf
Diagram shows L 4 height adjustable swing-out shelves
with chromium plated railing
Actual space
4 rotating shelf cushionings
100 for installation on site
Pl.depth

56 1 fixed adjustment blender

9
Door width
including blenders TPEE780 7 0 0 0 0 0 0 0 0
OPEE766 7 0 0 0 0 0 0 0 0
Extra charge per 5 cm additional MPTP5 5 5 7 7 8 11 13 13 14
width (up to max. 20 cm)

It is essential to state blender-height for the

connecting floor and wall unit.
The cupboard has knock down fittings and
can be dismantled for access.

Corner tall unit .

with connection to tall units of the
same height Front line 80 cm
Planning depth 65 cm Door width 50 cm
Actual space 115 (110 up to 126 cm) VHEE115204HLM L/R 100 2299 2355 2460 2585 2743 2900 3073 3191
124,15 Door width 60 cm
Actual space 125 (120 up to 136 cm) VHEE125204HLM L/R 100 2427 2487 2600 2741 2906 3071 3247 3369
1 door strapped together or door
1 adjustable shelf
79,25
1 fixed shelf
Diagram shows L 4 height adjustable swing-out shelves
with chromium plated railing
Actual space
4 rotating shelf cushionings
100 for installation on site
Pl.depth

56 1 inner blender with angle blender HPEEW9204 9 0 0 0 0 0 0 0 0

adjustable from 4 to 10 cm
9
Door width
Extra charge per 5 cm additional MPHP5 5 24 26 26 27 34 38 39 42
width (up to max. 20 cm)

The cupboard has knock down fittings and

can be dismantled for access.
Please note: when placing an order, it is imperative
to specify the actual floor measurement, the angle
blender HPEEW 9 .. is adapted at factory.

37.08 1/2022
 Price group
Function tall units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Storage-Centre Front line 80 cm
1 door strapped together or door VH50204VC L/R 50 1239 1290 1351 1408 1545 1681 1785 1860
with wide angle hinges VH60204VC L/R 60 1283 1335 1407 1470 1616 1761 1887 1972
1 lattice with 5 hanging baskets
3 hooks (adjustable)
124,15 1 adjustable shelf
1 swing out fitment with 4 fixed shelves
and wire surround
79,25 2 fixed shelves
1 stainless steel floor protection
Diagram shows L with textured surface
3 adjustable shelves (depth 17 cm)
1 removable basket

Cookware-Centre Front line 80 cm

1 door strapped together or door VH60204VT L/R 60 1107 1173 1248 1387 1479 1570 1674 1756
with wide angle hinges
1 vario grid with 4 lid holders
and 1 suspended basket
124,15 3 utility cupboard battens with
9 hooks (adjustable)
2 adjustable shelves (depth 27.2 cm)
79,25 2 fixed shelves (depth 45 cm)
1 inner drawer (depth 40 cm)
Diagram shows L 1 vertical compartment
2 adjustable shelves (depth 34 cm)

Vertical compartment always opposite hinged side.

LED-Linear-interior lighting VT60LE 316

1 light with LED-strip
integrated in the top
1 light with LED-strip
integrated in shelf above
the appliance niche
Light temperature 4000K, neutral white
1 adapter 240 volt 50 HZ, 24 volt,
40 watt
1 distributor for constant 4000K
2 extension cables 4 pole, 200 cm
1 HSSC sensor switch
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

Socket insert STE 61

with 3 sockets
For Great Britain
STEGB 76
For France
STEFR 76
For Switzerland
STECH 82
For USA
STEUS 112

Niche door Front line 80 cm

1 door strapped together or door VH30204N L/R 30 405 446 479 565 635 705 801 894
with attached plinth VH45204N L/R 45 432 462 508 592 681 770 855 950
no rear panel VH50204N L/R 50 439 476 522 630 727 823 919 1020
no floor VH60204N L/R 60 456 494 549 664 768 874 995 1104
124,15

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
79,25

Diagram shows L

If planned into corner, blender of 15-20 cm is necessary.

Do not plan next to projecting cupboards.

1/2022 37.09
 Price group
Interior+ tall units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Interior+ base tall unit Front line 80 cm
1 door strapped together or door VH50204I L/R 50 545 586 653 774 859 947 1074 1156
1 fixed shelf (depth 35.7 cm) VH60204I L/R 60 579 624 696 842 935 1027 1146 1235
5 adjustable shelves, depth 34.7 cm
additional Interior+ swing-out frame
124,15 essential

Wide angle hinges cannot be used.

79,25 Width and height alterations are not possible.

Diagram shows L

Interior+ swing-out frame For cupboard width 50 cm

1 swing-out frame with: IP50204 1362
5 adjustable profile shelves For cupboard width 60 cm
11 railings IP60204 1429
1 fixed railing side

Possible accessories
precise description see page 90.34.

Interior+ shelf IP50B 50 155

IP60B 60 160

Interior+ railing IP50R 50 73

IP60R 60 74

Interior+ glass jar set IPGD3 72

IPGD4 94

Interior+ container IP1423C 67

IP1435C 67

Price group
End tall units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 cm
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
End tall unit Basic type
1 composition angled door or angled door Front line 80 cm
3 fixed glass shelves Cupboard depth 36 cm
1 fixed shelf VHAW3020436 L/R 30 1233 1283 1365 1531 1675 1819 1972 2106
2 fixed glass shelves Carcase depth 56 cm

124,15
Always state interior style, VHAW30204 L/R 30 1290 1342 1428 1601 1752 1903 2064 2202
possible colours see chapter 11!
Extra charge interior
MPK/KH/KG 0
79,25
MPFF/PF/VM 107
Diagram shows R MPFS/ME 156
MPFG 245
MPH 261
Not available in ALURO-C, BOSSA-C, CONCRETE-A, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-A,
STEEL-C, STONE-A, STONE-C, VALAIS-C

LED-Linear-interior lighting For depth 36 cm

1 light with LED-strip HAW36LE 212
integrated in the top
1 light with LED-strip For depth 58 cm
integrated in fixed shelf HAW58LE 236
Light temperature 4000K, neutral white
1 adapter 240 volt 50 HZ, 24 volt,
40 watt
1 distributor for constant 4000K
2 extension cables 4 pole, 200 cm
1 HSSC sensor switch
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

37.10 1/2022
 Price group
End tall units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 cm
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
End tall unit Basic type
with glass insert Front line 80 cm
1 composition angled door Cupboard depth 36 cm
52,75
with glass part 71 cm high VHAW3020436PG L/R 30 1471 1521 1603 1770 1916 2063 2217 2368
above front line 80 cm Carcase depth 56 cm
4 fixed glass shelves VHAW30204PG L/R 30 1526 1581 1667 1842 1993 2145 2307 2463
71,65 2 fixed shelves
Always state interior style, Extra charge interior
possible colours see chapter 11! MPK/KH/KG 0
79,25
MPFF/PF/VM 107
Diagram shows R MPFS/ME 156
MPFG 245
MPH 261
Not available in ALURO-C, BOSSA-C, CONCRETE-A, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-A,
STEEL-C, STONE-A, STONE-C, VALAIS-C

LED-Linear-interior lighting For depth 36 cm / 3 watt

Connected wattage 3 or 5 W HAG36LE 66
1 light with LED-strip
integrated in fixed shelf For depth 58 cm / 5 watt
above glass niche HAG58LE 91
Light temperature 4000K or variable of
2700 to 6400K with dimmer possible
1 extension cable 4 pole, 200 cm
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

The light can be operated either with the power

supply set S24 4000K or with the dynamic light
control S24 DL .. .
Order optional switch BZS or FZS.
Additional HAW .. LE possible for
total illumination!

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 203.9 cm
Side depth 34 cm FS20434 L/R 34 0 0 137 197 270 338 177
Side depth 46 cm FS20446 L/R 46 0 0 159 230 356 446 234
Side depth 56 cm FS20456 L/R 56 0 0 159 230 356 446 234
Side depth 61 cm FS20461 L/R 61 0 0 184 265 410 514 271
Side depth 66 cm FS20466 L/R 66 0 0 184 265 410 514 271
Side depth 76 cm FS20476 L/R 76 0 0 194 281 435 544 285
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

1/2022 37.11
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side with .
depth increase
Carcase height 203.9 cm
Side depth up to 34 cm FSUEL20434 L/R 34 92 92 229 289 362 430 269
Side depth up to 46 cm FSUEL20446 L/R 46 92 92 251 322 448 538 326
Side depth up to 58 cm FSUEL20458 L/R 58 92 92 251 322 448 538 326
Side depth up to 63 cm FSUEL20463 L/R 63 92 92 276 357 502 606 363
Side depth up to 68 cm FSUEL20468 L/R 68 146 146 330 411 556 660 417
Side depth up to 76 cm FSUEL20476 L/R 76 146 146 340 427 581 690 431
Diagram shows R

Leading edge as carcase exterior side.

Price group
Blenders

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 203.9 cm
Front finish HP20204 L/R 20 100 114 119 127 142 158 161 174

Front finish blenders are manufactured with a maximum

20 cm width. Please make up larger dimension blenders
from rear panels in front finish RWF .. .
Laminate decors with horizontal texture are made,
starting from a blender height of 204 cm, in divided
203,65
style (front line 80 cm) and depending on the material,
Diagram shows L
at no extra charge.
Programmes SOLID-C and VALAIS-C in divided
style (front line 80 cm).

Tall unit corner blender 90° Carcase height 203.9 cm

Front finish HPE204 10 211 232 248 268 298 330 341 364
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Please note: With use of handles deeper than

3 cm, the relevant leg length must be at least
203,65 7 cm. See sketch.
Flush with front.
7 Please state rear length (inside measurement)
from l to r on order.
Laminate decors with horizontal texture are made,
starting from a blender height of 204 cm, in divided
7

style (front line 80 cm) and depending on the material,

at no extra charge.
Programmes SOLID-C and VALAIS-C in divided
style (front line 80 cm).

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 203.9 cm

Front finish HPEW204 10 216 238 256 271 302 338 343 369
Freely selectable angle up to max. 270°
Not available in IOS-C, IOS-M-C
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width

Flush with front.

203,65
Please state rear length (inside measurement)
from l to r on order.
3
Laminate decors with horizontal texture are made,
starting from a blender height of 204 cm, in divided
3

style (front line 80 cm) and depending on the material,

at no extra charge.
Programmes SOLID-C and VALAIS-C in divided
style (front line 80 cm).

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

37.12 1/2022
 Price group
Blenders

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Divided blender .
available for HP.., HPE.. and HPEW..

Division of blender at 79.5 cm height MPPGT80 39

MP PGT 80
Division of blender at 66.25 cm height MPPGT66 39
MP PGT 66
MP PGT 53 Division of blender at 53.0 cm height MPPGT53 39

Several divisions are possible.

Example: 1x HPE 204

1x MP PGT 80
MP PGT 80 1x MP PGT 53
MP PGT 53

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 203.9 cm
flush with carcase HSB20204 20 58 60 70 90 98 105 123 83

1/2022 37.13
 Price group
Rear panels
Front finish

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 80 cm
in variable sizes RWF204 424 489 610 728 902 1075 1229 1379
Height up to 203.65 cm
124,15 Not available in IOS-C, IOS-M-C
Max. width 120 cm
with loose plinth

79,25 Minimum charged 0.5 metres.

Rear panel in Front line 80 cm

front finish RWF30204 30 219 239 290 330 420 512 581 659
in fixed front sizes RWF45204 45 231 259 323 383 470 560 641 721
with loose plinth RWF50204 50 235 272 339 403 501 598 683 766
For carcase height 203.9 cm RWF60204 60 246 292 360 434 550 667 753 842
124,15
old RW .. 204

79,25

37.14 1/2022
Tall units with vertical recessed handles
Tall units, carcase height 217.15 cm

CARCASE LINE 80

Tall units 38. 01

Tall utility units 38. 02

Housing units 38. 03-05

Appliance fronts for large capacity appliances 38. 06

Slide-away doors tall units 38. 07

Accessories for slide-away doors cupboards 38. 08

Corner tall units 38. 09

Function tall units 38. 10

Interior+ tall units 38. 11

End tall units 38. 11-12

Visible carcase sides 38. 12-13

Blenders 38. 13-14

Blenders 38. 14

Rear panels 38. 15

217.15 cm
Tall units

38.

1/2022 38.
 Tall units with vertical recessed handles
Tall units, carcase height 217.15 cm
T: Cupboard depth cm

Tall units Housing units Appliance fronts Corner units Interior+

38.01 38.03 38.06 38.09 38.11

T: 36 / 48 / 58 cm T: 58 cm VGF 46 217 T: 58 cm T: 58 cm
VH 30 217 VHG 60 217 6 VGF 61 217 VHEE 115 217 ULM VH 50 217 I
VH 45 217 66,0 VGF 76 217 VHEE 125 217 ULM VH 60 217 I
VH 50 217 VGF 91 217
137,4
VH 60 217 137,4
137,4 137,4

79,25
79,25 79,25 79,25 79,25

38.01 38.03 38.06 38.09

T: 36 / 48 / 58 cm T: 58 cm VGFR 46 217 E T: 58 cm
VH 45 217 SZ2 VHG 60 217 6 SZ2 VGFR 61 217 E VHEE 115 217 HLM
VH 50 217 SZ2 66,0 VGFR 76 217 E VHEE 125 217 HLM
VH 60 217 SZ2
137,4 137,4
13,0
13,0
26,25 26,25 Angle cupboards
39,5
216,9
39,5 79,25

38.01 38.03 38.06 38.11

T: 36 / 48 / 58 cm T: 58 cm VGF 76 217 Z T: 36 / 58 cm
VH 30 217 IZ4 VHG 60 217 M6 Z2 VGF 91 217 Z VHAW 30 217
VH 45 217 IZ4 52,75

VH 50 217 IZ4 39,5

137,4
VH 60 217 IZ4
52,1

26,25
Function cupboards 137,4

76,6
79,25 26,25
79,25

38.01 38.03 38.06 38.10 38.12

T: 36 / 48 / 58 cm T: 58 cm VGF 76 217 Z2 T: 58 cm T: 36 / 58 cm
VH 30 217 GVZE VHG 60 217 11D VGF 91 217 Z2 VH 50 217 VC VHAW 30 217 PG
VH 45 217 GVZE 52,75 VH 60 217 VC 66,0

137,4
71,65
34,1 / 34,5

42,6
216,9 52,75 79,25 79,25

38.01 T: 36 / 48 / 58 cm 38.03 T: 58 cm 38.10 T: 58 cm

VH 30 217 GVZ2 VHG 60 217 11D VH 60 217 VT
VH 45 217 GVZ2 52,75
Z2
VH 50 217 GVZ2
137,4
VH 60 217 GVZ2 137,4

26,25
Slide-away doors cupboards
79,25 26,25 79,25

38.01 38.03 38.07 38.10

T: 58 cm T: 58 cm T: 68 cm VH 30 217 N
VH 30 217 VZZIS2 VHG 60 217 11D VHVG 70 217 VH 45 217 N
VH 45 217 VZZIS2 ZH 68 GS VH 50 217 N
79,25
VH 60 217 N
137,4
137,4
137,4
79,25

39,5 79,25
79,25

38.04 T: 58 cm 38.07 T: 68 cm
VHGT 60 217 12 Z VHVG 70 217 68
66,0
VHGTI 60 217 12 Z
137,4

Tall utility units 124,15

79,25
26,25

38.02 T: 58 cm 38.04 T: 58 cm 38.07 T: 68 cm

VH 45 217 HW VHGT 60 217 VHVG 70 217 68
VH 50 217 HW 52,75
12 ZH WM
VH 60 217 HW VHGTI 60 217
137,4 12 ZH 137,4

124,15
79,25
79,25 39,5

38.02 T: 58 / 68 cm 38.04 T: 58 cm
VH 45 217 GA IZ 39,5
VHGT 60 217 14 Z
VH 50 217 GA IZ VHGTI 60 217 14 Z
VH 60 217 GA IZ
137,4

150,65
79,25 26,25

38.02 T: 48 / 58 cm 38.04 T: 58 cm
VH 45 217 SH IS VHGT 60 217 16
VH 50 217 SH IS 52,75 VHGTI 60 217 16
VH 60 217 SH IS
137,4
97,65

79,25 66,0

38.04 T: 58 cm
26,25
VHGT 60 217
10D7 K
VHGTI 60 217 10
110,9 D7K

79,25

38.05 T: 58 cm
26,25
VHGT 60 217 18 K
VHGTI 60 217 18 K

110,9

79,25
217.15 cm

38.05
Tall units

T: 58 cm
VHGT 60 217 18
VHGTI 60 217 18

137,4

38. 79,25

38.05 T: 68 cm
VHG 70 217 68
WM

38. 1/2022
 Price group
Tall units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Storage unit Front line 80 cm
1 door strapped together or door VH30217 L/R 30 568 588 632 701 834 967 1038 1127
1 fixed shelf VH45217 L/R 45 607 633 688 774 910 1045 1125 1215
6 adjustable shelves VH50217 L/R 50 617 653 708 805 950 1093 1185 1277
VH60217 L/R 60 645 681 749 852 1018 1184 1272 1370

137,4

79,25

Diagram shows L

Tall storage unit Front line 80 cm

1 door VH45217SZ2 L/R 45 941 984 1057 1171 1354 1554 1659 1791
4 adjustable shelves VH50217SZ2 L/R 50 959 1006 1077 1198 1383 1587 1701 1832
1 fixed shelf VH60217SZ2 L/R 60 982 1038 1114 1237 1438 1638 1773 1905
1 drawer
2 pullouts Example modular parts list
137,4
13,0
VHM45217
26,25
MO45138T
MU4580SZ2
39,5

Diagram shows L

Tall storage unit Front line 80 cm

1 door strapped together or door VH30217IZ4 L/R 30 1191 1220 1269 1343 1463 1581 1650 1740
2 adjustable shelves VH45217IZ4 L/R 45 1197 1237 1288 1374 1500 1625 1705 1796
2 inner pullouts VH50217IZ4 L/R 50 1204 1251 1309 1407 1539 1670 1759 1852
1 fixed shelf VH60217IZ4 L/R 60 1220 1281 1360 1465 1609 1752 1842 1941
2 inner pullouts
137,4

Exchange wide angle hinge ANIGE 0

79,25 through standard hinge, with spacer strip
Diagram shows L

Pharmacy tall unit Front one-piece

1 large capacity pullout with front panel VH30217GVZE 30 934 954 998 1067 1200 1333 1404 1493
guided on 2 pullouts and VH45217GVZE 45 985 1011 1066 1153 1288 1424 1503 1593
1 drawer
Cupboard width 30, 45 cm:
3 inner drawers
Not available in IOS-C, IOS-M-C, SOLID-C, VALAIS-C
1 fixed shelf

Max. loading 20 kg per pullout / drawer.

Due to the possible weight load, please include a
216,9
recessed handle on both carcase sides.

Pharmacy tall unit Front line 80 cm

1 pullout with pullout and VH30217GVZ2 30 934 954 998 1067 1200 1333 1404 1493
drawer connection VH45217GVZ2 45 985 1011 1066 1153 1288 1424 1503 1593
1 fixed shelf VH50217GVZ2 50 1006 1042 1097 1194 1339 1482 1574 1666
2 inner drawers VH60217GVZ2 60 1029 1065 1132 1236 1402 1568 1655 1754
137,4 1 pullout
1 fixed shelf
1 inner drawer
79,25
Max. loading 20 kg per pullout / drawer.
Due to the possible weight load, please include a
recessed handle on both carcase sides.

Storage unit Front line 80 cm

1 large capacity pullout VH30217VZZIS2 30 1125 1143 1190 1258 1438 1618 1695 1785
with front panel (top) VH45217VZZIS2 45 1237 1265 1318 1406 1584 1763 1849 1942
4 adjustable wire baskets with glass bottoms
1 fixed shelf
1 large capacity pullout with front panel (bottom)
137,4
2 inner drawers
2 loose baskets

79,25 Max. loading 15 kg per basket.

VZ-premium equipment MPVZ30P4 95

Frame inside faced in carcase style MPVZ45P4 131
4 adjustable shelves with glass sides

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 38.01
 Price group
Tall utility units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 48 cm Cupboard depth 68 cm (extra charge 52 pts)
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall utility unit Front line 80 cm
1 door strapped together or door VH45217HW L/R 45 572 599 649 737 864 992 1070 1159
1 adjustable shelf VH50217HW L/R 50 582 615 671 768 907 1042 1131 1222
1 fixed shelf (depth 41.7 cm) VH60217HW L/R 60 605 643 707 815 973 1128 1217 1316
1 adjustable function shelf with railing
(depth 31 cm)
137,4 1 hose holder and 3 clamping hooks
2 adjustable shelves (depth 28 cm)

79,25

Diagram shows L

Package vertical shelf HWV 55

1 centre panel next to hinged side,
on two-door cupboards left
Shelf height 160 cm
Shelf width 18.4 cm
Installed in tall utility unit

Available from cupboard height 190 cm and from

cupboard width 50 cm.
Combination with package waste depot possible.

Package waste depot HWWD 111

1 frame with lid for waste bags
at side opposite hinged side,
on two-door cupboards right
1 cloth bag

Combination with package vertical shelf from cupboard

width 50 cm possible.

Package drinks crates storage HW60GA2 77

2 racks for drinks crates made of steel tubing
for fitting in crockery- or utility unit
on site

When used in the utility unit, function shelf, hose rack

and clamping hook are dispensed with in favour of an
adjustable shelf.

Tall wardrobe unit Front line 80 cm

1 door strapped together or door VH45217GAIZ L/R 45 529 555 610 697 832 968 1047 1137
1 clothes rail VH50217GAIZ L/R 50 543 579 634 731 876 1018 1111 1203
1 fixed shelf VH60217GAIZ L/R 60 569 605 672 776 942 1107 1195 1294
1 inner pullout with metal frame
137,4

79,25

Diagram shows L

Shelf above the clothes rail ANGABO 22

1 fixed shelf above the clothes rail

Shelf 27 cm from carcase upper edge.

Mirror GASP 40
35 x 100 cm
Mirror adhesive tape for applying to
rear of the door on site

Tall shoe unit Front line 80 cm

1 door strapped together or door VH45217SHIS L/R 45 619 646 700 788 922 1058 1137 1227
4 adjustable shoe racks VH50217SHIS L/R 50 640 675 731 827 972 1115 1207 1299
2 adjustable shelves VH60217SHIS L/R 60 668 704 771 876 1041 1207 1295 1394
1 fixed shelf
1 inner drawer
137,4

79,25

Diagram shows L

38.02 1/2022
 Price group
Housing units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit Front line 80 cm
1 door VHG602176 L/R 60 542 562 618 683 806 928 1065 1150
2 adjustable shelves
66,0 1 appliance niche 57-60 cm Modular parts list
1 door VHGM60217
2 adjustable shelves MO6066T
MGN6071
For ovens. MU6080T

79,25

Diagram shows L

Housing unit Front line 80 cm

1 door VHG602176SZ2 L/R 60 890 929 1003 1092 1296 1499 1663 1778
2 adjustable shelves
66,0 1 appliance niche 57-60 cm Modular parts list
1 drawer VHGM60217
2 pullouts MO6066T
13,0 MGN6071
26,25 For ovens. MU6080SZ2

39,5

Diagram shows L

Housing unit VHG60217M6Z2 L/R 60 925 966 1034 1130 1290 1453 1659 1775
1 door
52,75 1 adjustable shelf Modular parts list
39,5 1 lift-up door for VHGM60217
appliance niche 33 cm high MO6053T
and 49 cm wide MGK6040
1 appliance niche 57-60 cm MGN6071
2 pullouts MU6053Z2
26,25
26,25 For microwave and oven.
Diagram shows L

Housing unit VHG6021711D L/R 60 466 501 548 603 718 830 929 1034
1 door
52,75 1 adjustable shelf Modular parts list
1 appliance double niche 96-108 cm VHGM60217
1 door MO6053T
1 adjustable shelf MGN60110D
MU6053T
For microwave (built-in trim kit will be necessary)
and oven.
52,75

Diagram shows L

Housing unit VHG6021711DZ2 L/R 60 725 765 816 885 1003 1121 1305 1391
1 door
52,75 1 adjustable shelf Modular parts list
1 appliance double niche 96-108 cm VHGM60217
2 pullouts MO6053T
MGN60110D
For microwave (built-in trim kit will be necessary) MU6053Z2
and oven.
26,25
26,25

Diagram shows L

Housing unit VHG6021711DZH L/R 60 609 633 687 748 865 975 1118 1198
1 door
2 adjustable shelves Modular parts list
79,25 1 appliance double niche 96-108 cm VHGM60217
1 pullout MO6080T
MGN60110D
For microwave (built-in trim kit will be necessary) MU6040Z
and oven.

39,5

Diagram shows L

1/2022 38.03
 Price group
Housing units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit VHGT6021712Z L/R 60 676 709 784 880 1033 1192 1337 1435
1 door
2 adjustable shelves with integral ventilation
66,0 1 door for appliance niche 122 cm VHGTI6021712Z L/R 60 676 709 784 880 1033 1192 1337 1435
1 pullout
Modular parts list
For integrated fridge or freezer. VHGM60217
MO6066T
124,15 MGT60125
26,25 MU6027Z

Diagram shows L

Housing unit VHGT6021712ZH L/R 60 665 708 788 883 1047 1202 1346 1462
1 door
52,75 1 adjustable shelf with integral ventilation
1 door for appliance niche 122 cm VHGTI6021712ZH L/R 60 665 708 788 883 1047 1202 1346 1462
1 pullout
Modular parts list
For integrated fridge or freezer. VHGM60217
124,15 MO6053T
MGT60125
39,5 MU6040Z

Diagram shows L

Housing unit VHGT6021714Z L/R 60 642 675 754 845 993 1149 1286 1373
1 door
39,5
1 adjustable shelf with integral ventilation
1 door for appliance niche 140 cm VHGTI6021714Z L/R 60 642 675 754 845 993 1149 1286 1373
1 pullout
Modular parts list
For integrated fridge and freezer. VHGM60217
MO6040T
150,65 MGT60151
26,25 MU6027Z
Diagram shows L

Housing unit VHGT6021716 L/R 60 531 562 629 705 839 972 1054 1141
1 door
52,75 1 adjustable shelf with integral ventilation
2 doors or 1 door strapped together or VHGTI6021716 L/R 60 531 562 629 705 839 972 1054 1141
1 door for appliance niche 158 cm
Modular parts list
97,65 For integrated fridge and freezer. VHGM60217
MO6053T
MGT60164
66,0

Diagram shows L

Housing unit Front line 80 cm

26,25
1 top hinged door VHGT6021710D7K L/R 60 564 611 697 804 955 1101 1275 1378
2 doors for appliance niche
top 103 cm and bottom 72 cm with integral ventilation
Front line 80 cm
For integrated fridge and freezer. VHGTI6021710D7K L/R 60 564 611 697 804 955 1101 1275 1378
110,9
Modular parts list
VHGM60217
79,25 MO6027K
MGT60111
Diagram shows L
MGT6080

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

38.04 1/2022
 Price group
Housing units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit Front line 80 cm
26,25
1 top hinged door VHGT6021718K L/R 60 589 647 749 884 1002 1120 1262 1367
2 doors or 1 door strapped together or
1 door for appliance niche 178 cm with integral ventilation
1 support hinge SSCH Front line 80 cm
when the front projects more than 26 cm VHGTI6021718K L/R 60 589 647 749 884 1002 1120 1262 1367
110,9
from the appliance
Modular parts list
For integrated fridge and freezer. VHGM60217
79,25 MO6027K
MGT601908
Diagram shows L

Housing unit Front line 80 cm

2 doors or 1 door strapped together or VHGT6021718 L/R 60 584 646 750 913 1010 1106 1215 1311
1 door for appliance niche 178 cm
1 support hinge SSCH with integral ventilation
when the front projects more than 26 cm Front line 80 cm
from the appliance VHGTI6021718 L/R 60 584 646 750 913 1010 1106 1215 1311
137,4

For integrated fridge and freezer. Modular parts list

VHGM60217
79,25 MGT602178
Diagram shows L

Washing machine housing unit Front line 80 cm

depth 68 cm VHG7021768WM L/R 70 607 669 766 914 1017 1121 1210 1307
1 door strapped together or door
Not available in IOS-C, IOS-M-C
1 loose construction shelf
1 plinth platform

Please state plinth height.

AN TU 85 and VB not possible due to missing
ventilation!
Cupboard is supplied unassembled.
For 2 appliances max.
Diagram shows L

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

1/2022 38.05
 Price group
Appliance fronts for large capacity appliances

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Appliance door for large capacity Front line 80 cm
appliance VGF46217 L/R 49 294 342 417 522 633 742 823 963
1 inner blender above appliance VGF61217 L/R 64 333 377 463 603 728 853 971 1113
Hinge drill holes on site VGF76217 L/R 80 434 472 582 812 977 1143 1356 1504
VGF91217 L/R 95 552 582 720 1053 1264 1476 1800 1955
137,4 Also available for SUB-ZERO 700 series,
Cupboard width 49, 64, 79, 94 cm:
Miele and BSH appliances.
Not available in BOSSA-C

79,25

Cutout for dispenser AUSGT 163

width 23.1 x height 36.8 cm (BSH, Gaggenau)
Not available in IOS-C, IOS-M-C, SOLID-C
or width 23.1 x height 37.5 cm (Miele)

With a plinth higher than 10 cm, the appliance must

be raised on site.

Framed front for large capacity appliance VGFR46217E L/R 49 513 559 634 740 853 967 1046 1187
1 inner blender above appliance VGFR61217E L/R 64 551 597 681 822 950 1076 1194 1336
Hinge drill holes on site VGFR76217E L/R 80 653 692 800 1031 1199 1366 1580 1729
Cupboard width 49, 64, 79 cm:
Also available for the following appliances:
Not available in BOSSA-C, IOS-C, IOS-M-C, SOLID-C, VALAIS-C
in widths 46 and 61 cm SUB-ZERO 700 series,
Miele and BSH appliances.
In width 76 cm SUB-ZERO 700 series appliances.
216,9 With a plinth higher than 10 cm, the appliance must
be raised on site.

Appliance front for large capacity VGF76217Z L/R 80 452 491 605 843 1016 1189 1411 1564
appliance (1 door and 1 pullout) VGF91217Z L/R 95 575 605 748 1094 1315 1533 1872 2033
1 inner blender above appliance
Cupboard width 79, 94 cm:
Height pullout front according to
Not available in BOSSA-C
appliance manufacturer
Hinge drill holes on site
52,1

76,6

Appliance front for large capacity VGF76217Z2 L/R 80 461 501 616 859 1036 1212 1438 1593
appliance (1 door and 2 pullouts) VGF91217Z2 L/R 95 585 616 762 1115 1340 1564 1908 2072
1 inner blender above appliance
Cupboard width 79, 94 cm:
Hinge drill holes on site
Not available in BOSSA-C
Liebherr appliances front heights 42.6 and 34.1 cm.
SUB-ZERO 700 series appliances heights 42.6 and
34,1 / 34,5
34.5 cm.
42,6

Please state appliance manufacturer and appliance type.

Minimum plinth height 10 cm! If necessary, smaller plinth height is also possible, depending on the appliance manufacturer.
Consider depth of appliance when planning side panels etc.
Programme TOCCO-A and TOCCO-C side with thick edges.

38.06 1/2022
 Price group
Slide-away doors tall units
Carcase height 217.15 cm, cupboard depth 68 cm

Neutral
Please note planning instructions on page 3.03!
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Slide-away door housing unit Basic type
1 door strapped together or door Front line 80 cm
with slide-away facility VHVG7021768GS L/R 70 3227 3260 3316 3386 3542 3700 3773 4016
1 or 2 adjustable shelves
(according to appliance niche height) Extra charge interior
137,4 1 fixed shelf MPK/KH/KG 0
1 appliance niche MPFF/PF/VM 402
1 niche for dishwasher MPFS/ME 589
1 plinth cover in front of dishwasher MPFG 923
79,25
in carcase interior colour MPH 719
1 safety box SBOX 230
Diagram shows L Not available in IOS-C, IOS-M-C
Max. 3 appliance connection of
3.6 kw total.
Always state interior style,
possible colours see chapter 11!

Note cupboard depth 68 cm!

Dishwasher front GFV 60 .. or GFT 60 ..
must be ordered separately from the main list.
Please state appliance model on order!

Slide-away door housing unit Basic type

1 door strapped together or door Front line 80 cm
with slide-away facility VHVG7021768 L/R 70 3325 3354 3410 3481 3651 3820 3895 4143
1 or 2 adjustable shelves
(according to appliance niche height) Extra charge interior
137,4 1 fixed shelf MPK/KH/KG 0
1 appliance niche MPFF/PF/VM 402
2 inner pullouts MPFS/ME 589
1 safety box SBOX 230 MPFG 923
79,25
Max. 3 appliance connection of MPH 719
3.6 kw total.
Diagram shows L Not available in IOS-C, IOS-M-C
Always state interior style,
possible colours see chapter 11!

Note cupboard depth 68 cm!

Slide-away door washing machine Basic type

housing unit Front line 80 cm
1 door strapped together or door VHVG7021768WM L/R 70 2551 2583 2655 2732 2820 2906 2962 3151
with slide-away facility
1 construction shelf with fixings Extra charge interior
137,4 1 plinth platform MPK/KH/KG 0
Always state interior style, MPFF/PF/VM 402
possible colours see chapter 11! MPFS/ME 589
MPFG 923
79,25
Note cupboard depth 68 cm! MPH 719
AN TU 85 and VB not possible due to missing
Diagram shows L Not available in IOS-C, IOS-M-C
ventilation!
Please state plinth height and appliance height.
For 2 appliances max.

All heat generating appliances planned behind a closed door must, for safety reasons, be connected to a safety box! The safety box activates on accidental
closing of the door on a working heat generating appliance and switches this off after 90 seconds. A warning signal will sound within this time span.

1/2022 38.07
 Surface style
Accessories for slide-away doors cupboards Descriptions / colours see chapter 11.

Extension components

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME FG MC H
Pullout tray For cupboard width 70 cm
for slide-away doors cupboards HVTAF70 70 302 302 417 481 518 573 501
Extendible with lock
Factory installed above fixed shelf,
for top cupboards above lower shelf
Pullout size: 60 x 50 cm

Tray is installed between cupboard sides.

Please state required colour and surface style.
Max. load 30 kg.
Pullout path 45 cm.

LED-Linear-interior lighting 5 watt

Connected wattage 5 W HV70LE 70 101
1 light with LED-strip
integrated in the top
Light temperature 4000K or variable of
2700 to 6400K with dimmer possible
1 extension cable 4 pole, 200 cm
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

The light can be operated either with the power

supply set S24 4000K or with the dynamic light
control S24 DL .. .
Order optional switch BZS, FZS or HSSC.

Socket insert STE 61

with 3 sockets
For Great Britain
STEGB 76
For France
STEFR 76
For Switzerland
STECH 82
For USA
STEUS 112

Extension of power input MPSBOX400 74

SBOX 230 included in standard delivery
is replaced by SBOX 400 for 3-phase
connection
1 automatic shut-off for the connection of
400 V or 230/240 V electrical appliances
1 door contact switch for controlling
Connection:
a) Input
- 5 pin power cable, 2.5 meter long
(connection to cooker connection box)
- Connecting to three phases
- Fuse protection on site max. 16 A per phase
b) Output
- 5 pin cable with free ends 2.5 m long

Mains voltage 230-240 V or 400 V, 50/60 HZ.

In a 400 V connection, appliances with a power consumption of up to 6000 VA can be connected.
When connecting 230/240 V appliances, a maximum power consumption of 3.6 kw per phase is possible.
Connection only by qualified electrician!
Important information about the connection possibilities can be found in the Internet: www.leicht.com on your
dealer page under „technical info“.

38.08 1/2022
 Price group
Corner tall units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Corner tall unit .
with connection to floor or
wall units Front line 80 cm
Planning depth 65 cm Door width 50 cm
Actual space 115 (110 up to 140 cm) VHEE115217ULM L/R 100 2399 2457 2582 2738 2928 3119 3335 3480
Door width 60 cm
137,4 Actual space 125 (120 up to 140 cm) VHEE125217ULM L/R 100 2527 2589 2722 2894 3091 3290 3509 3658
1 door strapped together or door
2 adjustable shelves
79,25 1 fixed shelf
4 height adjustable swing-out shelves
Diagram shows L with chromium plated railing
Actual space 4 rotating shelf cushionings
for installation on site
100 1 fixed adjustment blender
Pl.depth

56

9 including blenders TPEE780 7 0 0 0 0 0 0 0 0

Door width OPEE780 7 0 0 0 0 0 0 0 0
Extra charge per 5 cm additional MPTP5 5 5 7 7 8 11 13 13 14
width (up to max. 20 cm)

It is essential to state blender-height for the

connecting floor and wall unit.
The cupboard has knock down fittings and
can be dismantled for access.

Corner tall unit .

with connection to tall units of the
same height Front line 80 cm
Planning depth 65 cm Door width 50 cm
Actual space 115 (110 up to 126 cm) VHEE115217HLM L/R 100 2389 2450 2552 2679 2835 2992 3163 3281
Door width 60 cm
137,4 Actual space 125 (120 up to 136 cm) VHEE125217HLM L/R 100 2517 2582 2692 2835 2998 3163 3337 3459
1 door strapped together or door
2 adjustable shelves
79,25 1 fixed shelf
4 height adjustable swing-out shelves
Diagram shows L with chromium plated railing
Actual space 4 rotating shelf cushionings
for installation on site
100 1 inner blender with angle blender HPEEW9217 9 0 0 0 0 0 0 0 0
Pl.depth

56 adjustable from 4 to 10 cm
9
Door width Extra charge per 5 cm additional MPHP5 5 24 26 26 27 34 38 39 42
width (up to max. 20 cm)

The cupboard has knock down fittings and

can be dismantled for access.
Please note: when placing an order, it is imperative
to specify the actual floor measurement, the angle
blender HPEEW 9 .. is adapted at factory.

1/2022 38.09
 Price group
Function tall units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Storage-Centre Front line 80 cm
1 door strapped together or door VH50217VC L/R 50 1344 1379 1435 1532 1695 1856 1950 2042
with wide angle hinges VH60217VC L/R 60 1390 1424 1492 1592 1764 1933 2054 2154
1 lattice with 5 hanging baskets
3 hooks (adjustable)
1 adjustable shelf
137,4
1 swing out fitment with 4 fixed shelves
and wire surround
2 fixed shelves
79,25 1 stainless steel floor protection
with textured surface
Diagram shows L
3 adjustable shelves (depth 17 cm)
1 removable basket

Cookware-Centre Front line 80 cm

1 door strapped together or door VH60217VT L/R 60 1117 1189 1276 1419 1515 1613 1702 1793
with wide angle hinges
1 vario grid with 4 lid holders
and 1 suspended basket
3 utility cupboard battens with
137,4
9 hooks (adjustable)
2 adjustable shelves (depth 27.2 cm)
2 fixed shelves (depth 45 cm)
79,25
1 inner drawer (depth 40 cm)
Diagram shows L 1 vertical compartment
2 adjustable shelves (depth 34 cm)

Vertical compartment always opposite hinged side.

LED-Linear-interior lighting VT60LE 316

1 light with LED-strip
integrated in the top
1 light with LED-strip
integrated in shelf above
the appliance niche
Light temperature 4000K, neutral white
1 adapter 240 volt 50 HZ, 24 volt,
40 watt
1 distributor for constant 4000K
2 extension cables 4 pole, 200 cm
1 HSSC sensor switch
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

Socket insert STE 61

with 3 sockets
For Great Britain
STEGB 76
For France
STEFR 76
For Switzerland
STECH 82
For USA
STEUS 112

Niche door Front line 80 cm

1 door strapped together or door VH30217N L/R 30 416 463 490 581 658 734 832 932
with attached plinth VH45217N L/R 45 444 480 518 608 704 799 886 987
no rear panel VH50217N L/R 50 450 496 531 648 750 851 951 1058
no floor VH60217N L/R 60 465 514 560 679 791 900 1026 1141
137,4

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
79,25

Diagram shows L

If planned into corner, blender of 15-20 cm is necessary.

Do not plan next to projecting cupboards.

38.10 1/2022
 Price group
Interior+ tall units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Interior+ base tall unit Front line 80 cm
1 door strapped together or door VH50217I L/R 50 641 694 781 913 1004 1093 1185 1277
1 fixed shelf (depth 35.7 cm) VH60217I L/R 60 664 726 824 973 1077 1184 1272 1370
6 adjustable shelves, depth 34.7 cm
additional Interior+ swing-out frame
essential
137,4
Wide angle hinges cannot be used.
Width and height alterations are not possible.
79,25

Diagram shows L

Interior+ swing-out frame For cupboard width 50 cm

1 swing-out frame with: IP50217 1374
5 adjustable profile shelves For cupboard width 60 cm
11 railings IP60217 1441
1 fixed railing side

Possible accessories
precise description see page 90.34.

Interior+ shelf IP50B 50 155

IP60B 60 160

Interior+ railing IP50R 50 73

IP60R 60 74

Interior+ glass jar set IPGD3 72

IPGD4 94

Interior+ container IP1423C 67

IP1435C 67

Price group
End tall units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 cm
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
End tall unit Basic type
1 composition angled door or angled door Front line 80 cm
4 fixed glass shelves Cupboard depth 36 cm
1 fixed shelf VHAW3021736 L/R 30 1300 1352 1440 1618 1769 1921 2080 2222
2 fixed glass shelves Carcase depth 56 cm
Always state interior style, VHAW30217 L/R 30 1363 1420 1512 1697 1855 2015 2184 2333
137,4 possible colours see chapter 11!
Extra charge interior
MPK/KH/KG 0
79,25 MPFF/PF/VM 107
Diagram shows R MPFS/ME 156
MPFG 245
MPH 261
Not available in ALURO-C, BOSSA-C, CONCRETE-A, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-A,
STEEL-C, STONE-A, STONE-C, VALAIS-C

LED-Linear-interior lighting For depth 36 cm

1 light with LED-strip HAW36LE 212
integrated in the top
1 light with LED-strip For depth 58 cm
integrated in fixed shelf HAW58LE 236
Light temperature 4000K, neutral white
1 adapter 240 volt 50 HZ, 24 volt,
40 watt
1 distributor for constant 4000K
2 extension cables 4 pole, 200 cm
1 HSSC sensor switch
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

1/2022 38.11
 Price group
End tall units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 cm
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
End tall unit Basic type
with glass insert Front line 80 cm
1 composition angled door Cupboard depth 36 cm
66,0 with glass part 71 cm high VHAW3021736PG L/R 30 1539 1590 1678 1855 2010 2163 2323 2537
above front line 80 cm Carcase depth 56 cm
5 fixed glass shelves VHAW30217PG L/R 30 1601 1656 1751 1935 2096 2257 2427 2648
71,65 2 fixed shelves
Always state interior style, Extra charge interior
possible colours see chapter 11! MPK/KH/KG 0
79,25 MPFF/PF/VM 107
Diagram shows R MPFS/ME 156
MPFG 245
MPH 261
Not available in ALURO-C, BOSSA-C, CONCRETE-A, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-A,
STEEL-C, STONE-A, STONE-C, VALAIS-C

LED-Linear-interior lighting For depth 36 cm / 3 watt

Connected wattage 3 or 5 W HAG36LE 66
1 light with LED-strip
integrated in fixed shelf For depth 58 cm / 5 watt
above glass niche HAG58LE 91
Light temperature 4000K or variable of
2700 to 6400K with dimmer possible
1 extension cable 4 pole, 200 cm
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

The light can be operated either with the power

supply set S24 4000K or with the dynamic light
control S24 DL .. .
Order optional switch BZS or FZS.
Additional HAW .. LE possible for
total illumination!

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 217.15 cm
Side depth 34 cm FS21734 L/R 34 0 0 146 213 287 357 188
Side depth 46 cm FS21746 L/R 46 0 0 173 251 357 448 236
Side depth 56 cm FS21756 L/R 56 0 0 173 251 357 448 236
Side depth 61 cm FS21761 L/R 61 0 0 197 289 411 516 272
Side depth 66 cm FS21766 L/R 66 0 0 197 289 411 516 272
Side depth 76 cm FS21776 L/R 76 0 0 211 305 436 546 287
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

38.12 1/2022
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side with .
depth increase
Carcase height 217.15 cm
Side depth up to 34 cm FSUEL21734 L/R 34 92 92 238 305 379 449 280
Side depth up to 46 cm FSUEL21746 L/R 46 92 92 265 343 449 540 328
Side depth up to 58 cm FSUEL21758 L/R 58 92 92 265 343 449 540 328
Side depth up to 63 cm FSUEL21763 L/R 63 92 92 289 381 503 608 364
Side depth up to 68 cm FSUEL21768 L/R 68 146 146 343 435 557 662 418
Side depth up to 76 cm FSUEL21776 L/R 76 146 146 357 451 582 692 433
Diagram shows R

Leading edge as carcase exterior side.

Price group
Blenders

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 217.15 cm
Front finish HP20217 L/R 20 115 127 131 143 164 182 189 207

Front finish blenders are manufactured with a maximum

20 cm width. Please make up larger dimension blenders
from rear panels in front finish RWF .. .
Laminate decors with horizontal texture are made,
starting from a blender height of 204 cm, in divided
216,9 style (front line 80 cm) and depending on the material,
at no extra charge.
Diagram shows L Programmes SOLID-C and VALAIS-C in divided
style (front line 80 cm).

Tall unit corner blender 90° Carcase height 217.15 cm

Front finish HPE217 10 221 246 259 283 323 360 370 401
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Please note: With use of handles deeper than

3 cm, the relevant leg length must be at least
7 cm. See sketch.
216,9 Flush with front.
Please state rear length (inside measurement)
7 from l to r on order.
Laminate decors with horizontal texture are made,
starting from a blender height of 204 cm, in divided
7

style (front line 80 cm) and depending on the material,

at no extra charge.
Programmes SOLID-C and VALAIS-C in divided
style (front line 80 cm).

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 217.15 cm

Front finish HPEW217 10 236 263 277 297 336 374 385 416
Freely selectable angle up to max. 270°
Not available in IOS-C, IOS-M-C
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width

Flush with front.

216,9 Please state rear length (inside measurement)
from l to r on order.
3 Laminate decors with horizontal texture are made,
starting from a blender height of 204 cm, in divided
style (front line 80 cm) and depending on the material,
3

at no extra charge.
Programmes SOLID-C and VALAIS-C in divided
style (front line 80 cm).

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

1/2022 38.13
 Price group
Blenders

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Divided blender .
available for HP.., HPE.. and HPEW..

Division of blender at 79.5 cm height MPPGT80 39

MP PGT 80
Division of blender at 66.25 cm height MPPGT66 39
MP PGT 66
MP PGT 53 Division of blender at 53.0 cm height MPPGT53 39

Several divisions are possible.

Example: 1x HPE 204

1x MP PGT 80
MP PGT 80 1x MP PGT 53
MP PGT 53

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 217.15 cm
flush with carcase HSB20217 20 62 68 77 102 110 117 139 96

38.14 1/2022
 Price group
Rear panels
Front finish

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 80 cm
in variable sizes RWF217 505 574 678 857 1064 1269 1430 1596
Height up to 216.9 cm
137,4 Max. width 120 cm Not available in IOS-C, IOS-M-C
with loose plinth

79,25 Minimum charged 0.5 metres.

Rear panel in Front line 80 cm

front finish RWF30217 30 260 284 326 396 501 606 675 765
in fixed front sizes RWF45217 45 277 306 367 452 556 662 739 830
with loose plinth RWF50217 50 280 320 377 476 591 704 795 887
For carcase height 217.15 cm RWF60217 60 294 346 410 517 651 784 874 973
137,4 old RW .. 217

79,25

1/2022 38.15
1/2022
Tall units with vertical recessed handles
Modular tall units / Top cupboards

CARCASE LINE 80

Planning tips 39. 01

Basic units for modular housing units - Carcase heights 145.75 / 190.65 / 203.9 / 217.15 cm, carcase depth 56 cm 39. 02

Modules Below - Module height 13 cm 39. 02

Modules Below - Module height 27 cm 39. 02

Modules Below - Module height 40 cm 39. 02

Modules Below - Module height 53 cm 39. 03

Modules Below - Module height 66 cm 39. 04

Modules Below - Module height 80 cm 39. 05

Modules Below - Module height 93 cm 39. 06

Modules Below - Module height 106 cm 39. 07

Modules Appliance niche (open) - for carcase height 145,75 cm 39. 08

Modules Appliance niche (open) - for carcase heights 190,65 / 203,9 / 217,15 cm 39. 08

Modules Appliance double niche (open) - for carcase height 145,75 cm 39. 09

Modules Appliance double niche (open) - for carcase heights 190,65 / 203,9 / 217,15 cm 39. 09

Modules Appliance niche with lift-up door 39. 09

Modules Appliance niche with door 39. 10-11

Modules Appliance niche with door - Processing / Accessories 39. 12

Modules Above - Modules heights 27, 40, 53, 66, 80 and 93 cm 39. 13

Basic units for modular tall units - Carcase heights 145.75 / 190.65 / 203.9 / 217.15 cm, carcase depth 56 cm 39. 14

Modules Below - Module height 80 cm 39. 15

Modules Above 39. 16-17

Tall unit top cupboards - Carcase height 26.5 / 39.75 / 53.0 / 66.25 / 79.5 / 92.75 cm, carcase depth 56 cm 39. 18

Blenders 39. 19-20

Blenders 39. 20

Modular tall units /

Top cupboards

1/2022 39.
39.
 Tall units with vertical recessed handles
Modular tall units / Top cupboards
T: Cupboard depth cm
H: Cupboard height cm

Basic units Modules Below Modules Appliance niche Modules Above

39.02 T: 58 cm 39.02 - 39.07 39.08 39.13

MU 60 ... MGN 60 ... MO 60 ...
H: 146 cm
VHGM 60 146
VHGM 76 146
H: 190 cm
VHGM 60 190
VHGM 76 190
H: 204 cm
VHGM 60 204 39.09
VHGM 76 204 MGN 60 ... D
H: 217 cm MGN 76 ... D
VHGM 60 217
VHGM 76 217

39.09 MGK 60 ...

39.10 - 39.12
MGT 60 ...

Modular tall units Modules Below Modules Above

39.14 T: 36 / 48 / 58 cm 39.15 39.16 - 39.17

H: 146 cm
MU 30 ... MO 30 ...
VHM 30 146 MU 45 ... MO 45 ...
VHM 45 146
VHM 50 146 MU 50 ... MO 50 ...
VHM 60 146 MU 60 ... MO 60 ...

39.14 T: 36 / 48 / 58 cm
H: 190 cm
VHM 30 190
VHM 45 190
VHM 50 190
VHM 60 190

39.14 T: 36 / 48 / 58 cm
H: 204 cm
VHM 30 204
VHM 45 204
VHM 50 204
VHM 60 204

39.14 T: 36 / 48 / 58 cm
H: 217 cm
VHM 30 217
VHM 45 217
VHM 50 217
VHM 60 217

Tall unit top cupboards

39.18 T: 36 / 48 / 58 cm 39.18 T: 36 / 48 / 58 cm 39.18 T: 36 / 48 / 58 cm 39.18 T: 36 / 48 / 58 cm

VHAK 30 27 VHA 30 40 VHA 30 53 VHA 30 80
VHAK 45 27 VHA 45 40 VHA 45 53 VHA 45 80
VHAK 50 27 VHA 50 40 VHA 50 53 VHA 50 80
VHAK 60 27 VHA 60 40 VHA 60 53 VHA 60 80
VHAK 70 27 VHA 70 53 VHA 70 80
VHAK 76 27 VHA 76 53 VHA 76 80
VHAK 80 27
VHAK 91 27
39.18 T: 36 / 48 / 58 cm 39.18 T: 36 / 48 / 58 cm 39.18 T: 36 / 48 / 58 cm
VHAK 30 40 VHA 30 66 VHA 30 93
VHAK 45 40 VHA 45 66 VHA 45 93
VHAK 50 40 VHA 50 66 VHA 50 93
VHAK 60 40 VHA 60 66 VHA 60 93
VHAK 70 40 VHA 70 66 VHA 70 93
VHAK 76 40 VHA 76 66 VHA 76 93
VHAK 80 40
VHAK 91 40
Modular tall units /
Top cupboards

39. 1/2022
39.
Modular Tall Units - Planning tips

CARCASE LINE 80

1. Choice of basic cupboard The basic cupboard is the building block in kitchen planning and is • Modular housing units are available with 60 cm and 76 cm width
described by planning measurements (height, width and depth). In
addition to the modular housing units for appliances there is, with Relevant to the use, the basic cupboard will be stocked with modules:
the extended range of modules, the possibility of planning pure tall
units in various cupboard widths.
• All tall unit heights are available
• For modular tall units cupboard widths 30, 45, 50 and
60 cm are available

Examples: Examples:

Modular housing units Modular Tall Units

VHGM 60 XXX (XXX = cupboard height) VHM 30 XXX
VHM 45 XXX
Appliance position below / middle / above VHM 50 XXX
VHM 60 XXX (XXX = cupboard height)
MO 60 40

MO 60 40
MO 60 40

MO 60 40
MO 60 53 ...

MO 60 53 ...
MO 60 53...

MO 60 53...

MO ... 53 T
MGN 60 45

MGN 60 45
MGN 60 71

MGN 60 71

MO ... 125 T

MO ... 125 T
ie. 204 cm

ie. 204 cm
MGN 60 71

MGN 60 71

MO ... 72 T
MGT 60 151

MGT 60 151
MGT 60 93

MGT 60 93
MGT 60 151

MGT 60 151
MU 60 80 ...

MU 60 80 ...
MU 60 53 ...

MU 60 53 ...

MU ... 80 ST

MU ... 80 ST
MGT 60 93

MGT 60 93

MU ... 80 SZ2
MU MU
60 27 Z 60 27 Z

0 cm 60 cm
0/6 50 /
60 cm 60 cm 45/5 45 /
30 / 3 0 /

Summary of the modules = height of basic cupboard

(e.g. 204 cm). Permitted deviation +/- 2 cm because of the rounded module-planning dimensions.

2. Selecting the modules • Determining height and furnishing of the lower mod- The difference between module-planning dimension MGN.. and the
ule MU… or MGT… Considerations are the ergonomically respectively necessary appliance niche, is adjusted with front blend-
desired position of the appliance (module height) and the line lay- ers for frame programmes. All other programmes in 2-dimensional
out of the adjoining cupboards (front divisions). design have a dimensionally adjusted upper front (MO…) with front
• Appliance niche. For the respective appliance type and coloured thick-edge end adjacent the appliance.
its necessary niche, the appropriate module with door When using 2 appliances, add the thickness of 2 cm for a middle
MGT… or without door MGN… is selected. shelf according to the construction of the overall niche height. With
• Choice of the upper module MO…. The upper mod- appliances that can be stacked or when using bearing rails GUWIN
ule is determined from the rest by the dimensions of the the 2 cm addition is not necessary.
various module heights.
The following applies for planning programmes: based on the cal-
culated remainder of the measurement, the next smaller module
MO ... must be selected!

All basic cupboards and module variants can be found on the fol-
lowing pages.
For further examples of modular configurations, see standard tall
units, chapter 35 to 38.

1/2022 39.01
 Price group
Basic units for modular housing units
Carcase heights 145.75 / 190.65 / 203.9 / 217.15 cm, carcase depth 56 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Basic unit Carcase height 145.75 cm
for furnishing with modules VHGM60146 60 239 239 239 239 239 239 239 239
MU ..., MGN ..., MGK ..., VHGM76146 76 395 395 395 395 395 395 395 395
MGT ... and MO ...
Carcase height 190.65 cm
Width alterations of between 60 cm up to 76 cm are VHGM60190 60 261 261 261 261 261 261 261 261
charged with the price VHGM 76 .. . VHGM76190 76 417 417 417 417 417 417 417 417

Carcase height 203.9 cm

VHGM60204 60 268 268 268 268 268 268 268 268
VHGM76204 76 424 424 424 424 424 424 424 424

Carcase height 217.15 cm

VHGM60217 60 277 277 277 277 277 277 277 277
VHGM76217 76 433 433 433 433 433 433 433 433

Price group
Modules Below
Module height 13 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 13 MU6013B 60 41 49 57 72 92 109 128 148
module height 13 cm MU7613B 76 41 49 57 72 92 109 128 148
1 blender

Module Below 13 MU6013S 60 111 116 123 142 163 185 217 235
module height 13 cm MU7613S 76 111 116 123 142 163 185 217 235
1 drawer

Price group
Modules Below
Module height 27 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 27 MU6027Z 60 155 164 176 194 223 259 299 321
module height 27 cm MU7627Z 76 155 164 176 194 223 259 299 321
1 pullout

Module Below 27 MU6027S2 60 240 251 272 301 347 393 463 499
module height 27 cm MU7627S2 76 240 251 272 301 347 393 463 499
2 drawers

Price group
Modules Below
Module height 40 cm
Neutral

A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 40 MU6040T L/R 60 63 70 91 110 146 182 234 261
module height 40 cm MU7640T L/R 76 63 70 91 110 146 182 234 261
1 door
Cupboard width 76 cm:
1 adjustable shelf
Not available in IOS-C, IOS-M-C
Diagram shows L

Module Below 40 MU6040Z 60 178 188 209 230 272 310 367 394
module height 40 cm MU7640Z 76 178 188 209 230 272 310 367 394
1 pullout

Module Below 40 MU6040SZ 60 291 304 329 361 408 457 535 577
module height 40 cm MU7640SZ 76 291 304 329 361 408 457 535 577
1 drawer
1 pullout

39.02 1/2022
 Price group
Modules Below
Module height 53 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 53 MU6053T L/R 60 77 92 111 132 178 222 255 300
module height 53 cm MU7653T L/R 76 77 92 111 132 178 222 255 300
1 door
Cupboard width 76 cm:
1 adjustable shelf
Not available in IOS-C, IOS-M-C
Diagram shows L

Module Below 53 MU6053Z 60 173 185 208 234 284 333 368 413
module height 53 cm MU7653Z 76 173 185 208 234 284 333 368 413
1 pullout

Module Below 53 MU6053ZIZ 60 307 324 343 368 419 469 506 551
module height 53 cm MU7653ZIZ 76 307 324 343 368 419 469 506 551
1 pullout
1 inner pullout

Module Below 53 MU6053ST L/R 60 170 194 221 259 300 342 445 501
module height 53 cm MU7653ST L/R 76 170 194 221 259 300 342 445 501
1 drawer
Cupboard width 76 cm:
1 door
Not available in IOS-C, IOS-M-C
1 adjustable shelf
Diagram shows L

Module Below 53 MU6053SZ 60 291 316 342 379 421 463 568 624
module height 53 cm MU7653SZ 76 291 316 342 379 421 463 568 624
1 drawer
1 pullout

Module Below 53 MU6053S2Z 60 390 424 452 496 540 584 728 787
module height 53 cm MU7653S2Z 76 390 424 452 496 540 584 728 787
2 drawers
1 pullout

Module Below 53 MU6053Z2 60 336 356 379 414 463 513 631 657
module height 53 cm MU7653Z2 76 336 356 379 414 463 513 631 657
2 pullouts

1/2022 39.03
 Price group
Modules Below
Module height 66 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 66 MU6066T L/R 60 111 117 140 165 213 263 314 346
module height 66 cm MU7666T L/R 76 111 117 140 165 213 263 314 346
1 door
Cupboard width 76 cm:
2 adjustable shelves
Not available in IOS-C, IOS-M-C

Diagram shows L

Module Below 66 MU6066Z 60 209 218 239 271 323 375 432 466
module height 66 cm MU7666Z 76 209 218 239 271 323 375 432 466
1 pullout

Module Below 66 MU6066ZIZ 60 359 367 390 419 473 527 585 619
module height 66 cm MU7666ZIZ 76 359 367 390 419 473 527 585 619
1 pullout
1 inner pullout

Module Below 66 MU6066ST L/R 60 204 223 250 295 338 378 509 553
module height 66 cm MU7666ST L/R 76 204 223 250 295 338 378 509 553
1 drawer
Cupboard width 76 cm:
1 door
Not available in IOS-C, IOS-M-C
1 adjustable shelf
Diagram shows L

Module Below 66 MU6066SZ 60 294 312 342 385 427 469 600 646
module height 66 cm MU7666SZ 76 294 312 342 385 427 469 600 646
1 drawer
1 pullout

Module Below 66 MU6066SZ2 60 460 486 522 577 706 835 913 992
module height 66 cm MU7666SZ2 76 460 486 522 577 706 835 913 992
1 drawer
2 pullouts

Module Below 66 MU6066S2Z 60 437 464 501 553 683 813 892 969
module height 66 cm MU7666S2Z 76 437 464 501 553 683 813 892 969
2 drawers
1 pullout

Module Below 66 MU6066Z2 60 320 342 369 414 458 501 635 680
module height 66 cm MU7666Z2 76 320 342 369 414 458 501 635 680
2 pullouts

39.04 1/2022
 Price group
Modules Below
Module height 80 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 80 MU6080T L/R 60 119 128 152 179 231 279 332 370
module height 80 cm MU7680T L/R 76 119 128 152 179 231 279 332 370
1 door
Cupboard width 76 cm:
2 adjustable shelves
Not available in IOS-C, IOS-M-C

Diagram shows L

Module Below 80 MU6080Z 60 220 231 253 285 342 398 454 492
module height 80 cm MU7680Z 76 220 231 253 285 342 398 454 492
1 pullout

Module Below 80 MU6080ZIZ 60 369 379 405 434 493 550 607 645
module height 80 cm MU7680ZIZ 76 369 379 405 434 493 550 607 645
1 pullout
1 inner pullout

Module Below 80 MU6080ST L/R 60 236 249 284 330 407 485 555 600
module height 80 cm MU7680ST L/R 76 236 249 284 330 407 485 555 600
1 drawer
Cupboard width 76 cm:
1 door
Not available in IOS-C, IOS-M-C
2 adjustable shelves

Diagram shows L

Module Below 80 MU6080SZ 60 326 341 372 418 499 578 649 692
module height 80 cm MU7680SZ 76 326 341 372 418 499 578 649 692
1 drawer
1 pullout

Module Below 80 MU6080SZIZ 60 475 491 523 570 650 732 800 845
module height 80 cm MU7680SZIZ 76 475 491 523 570 650 732 800 845
1 drawer
1 pullout
1 inner pullout

Module Below 80 MU6080SZ2 60 467 495 537 588 721 850 930 998
module height 80 cm MU7680SZ2 76 467 495 537 588 721 850 930 998
1 drawer
2 pullouts

Module Below 80 MU6080S2Z 60 414 440 476 533 633 733 817 829
module height 80 cm MU7680S2Z 76 414 440 476 533 633 733 817 829
2 drawers
1 pullout

Module Below 80 MU6080S2Z2 60 579 612 656 723 842 961 1115 1178
module height 80 cm MU7680S2Z2 76 579 612 656 723 842 961 1115 1178
2 drawers
2 pullouts

Module Below 80 MU6080Z2 60 332 346 379 424 533 643 740 799
module height 80 cm MU7680Z2 76 332 346 379 424 533 643 740 799
2 pullouts

Module Below 80 MU6080Z3 60 464 495 535 587 692 796 948 1002
module height 80 cm MU7680Z3 76 464 495 535 587 692 796 948 1002
3 pullouts

1/2022 39.05
 Price group
Modules Below
Module height 93 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 93 MU6093T L/R 60 145 154 179 208 264 318 378 430
module height 93 cm MU7693T L/R 76 145 154 179 208 264 318 378 430
1 door
Cupboard width 76 cm:
3 adjustable shelves
Not available in IOS-C, IOS-M-C

Diagram shows L

Module Below 93 MU6093ST L/R 60 245 265 296 342 423 504 582 640
module height 93 cm MU7693ST L/R 76 245 265 296 342 423 504 582 640
1 drawer
Cupboard width 76 cm:
1 door
Not available in IOS-C, IOS-M-C
2 adjustable shelves

Diagram shows L

Module Below 93 MU6093SZ 60 329 345 376 423 506 586 665 723
module height 93 cm MU7693SZ 76 329 345 376 423 506 586 665 723
1 drawer
1 pullout

Module Below 93 MU6093SZ2 60 494 522 564 617 752 885 970 1054
module height 93 cm MU7693SZ2 76 494 522 564 617 752 885 970 1054
1 drawer
2 pullouts

Module Below 93 MU6093SZ3 60 556 595 639 707 834 960 1124 1187
module height 93 cm MU7693SZ3 76 556 595 639 707 834 960 1124 1187
1 drawer
3 pullouts

Module Below 93 MU6093S2T L/R 60 333 361 398 456 557 658 749 777
module height 93 cm MU7693S2T L/R 76 333 361 398 456 557 658 749 777
2 drawers
Cupboard width 76 cm:
1 door
Not available in IOS-C, IOS-M-C
2 adjustable shelves

Diagram shows L

Module Below 93 MU6093S2Z2 60 604 640 681 750 874 995 1156 1234
module height 93 cm MU7693S2Z2 76 604 640 681 750 874 995 1156 1234
2 drawers
2 pullouts

Module Below 93 MU6093Z2 60 341 356 393 444 560 677 778 841
module height 93 cm MU7693Z2 76 341 356 393 444 560 677 778 841
2 pullouts

Module Below 93 MU6093Z3 60 474 505 548 605 716 825 983 1045
module height 93 cm MU7693Z3 76 474 505 548 605 716 825 983 1045
3 pullouts

39.06 1/2022
 Price group
Modules Below
Module height 106 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 106 MU60106T L/R 60 173 191 216 251 308 365 424 480
module height 106 cm MU76106T L/R 76 173 191 216 251 308 365 424 480
1 door
Cupboard width 76 cm:
3 adjustable shelves
Not available in IOS-C, IOS-M-C

Diagram shows L

Module Below 106 MU60106ST L/R 60 256 279 307 355 439 521 608 678
module height 106 cm MU76106ST L/R 76 256 279 307 355 439 521 608 678
1 drawer
Cupboard width 76 cm:
1 door
Not available in IOS-C, IOS-M-C
3 adjustable shelves

Diagram shows L

Module Below 106 MU60106S2T L/R 60 359 387 424 482 586 691 792 830
module height 106 cm MU76106S2T L/R 76 359 387 424 482 586 691 792 830
2 drawers
Cupboard width 76 cm:
1 door
Not available in IOS-C, IOS-M-C
2 adjustable shelves

Diagram shows L

Module Below 106 MU60106S2Z2 60 629 666 707 779 904 1029 1198 1287
module height 106 cm MU76106S2Z2 76 629 666 707 779 904 1029 1198 1287
2 drawers
2 pullouts

Module Below 106 MU60106S5Z 60 781 828 885 970 1147 1325 1493 1611
module height 106 cm MU76106S5Z 76 781 828 885 970 1147 1325 1493 1611
5 drawers
1 pullout

Module Below 106 MU60106Z3 60 580 614 668 739 858 977 1155 1221
module height 106 cm MU76106Z3 76 580 614 668 739 858 977 1155 1221
3 pullouts

Module Below 106 MU60106Z4 60 644 692 762 914 1046 1178 1265 1381
module height 106 cm MU76106Z4 76 644 692 762 914 1046 1178 1265 1381
4 pullouts

1/2022 39.07
 Price group
Modules Appliance niche (open)
for carcase height 145.75 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance niche .
(open)

1 appliance niche 33 - 39 cm MGN6040 60 35 40 49 62 85 109 142 157

MGN7640 76 35 40 49 62 85 109 142 157

1 appliance niche 40 - 45 cm MGN6053 60 35 40 49 62 85 109 142 157

MGN7653 76 35 40 49 62 85 109 142 157

1 appliance niche 58 - 60 cm MGN6066 60 35 40 49 62 85 109 142 157

MGN7666 76 35 40 49 62 85 109 142 157

1 appliance niche 82 - 92 cm MGN6093 60 35 40 49 62 85 109 142 157

MGN7693 76 35 40 49 62 85 109 142 157

Price group
Modules Appliance niche (open)
for carcase heights 190.65 / 203.9 / 217.15 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance niche .
(open)

1 appliance niche 33 - 43 cm MGN6045 60 35 40 49 62 85 109 142 157

MGN7645 76 35 40 49 62 85 109 142 157

1 appliance niche 44 - 56 cm MGN6058 60 35 40 49 62 85 109 142 157

MGN7658 76 35 40 49 62 85 109 142 157

1 appliance niche 57 - 60 cm MGN6071 60 35 40 49 62 85 109 142 157

MGN7671 76 35 40 49 62 85 109 142 157

1 appliance niche 82 - 95 cm MGN6097 60 35 40 49 62 85 109 142 157

MGN7697 76 35 40 49 62 85 109 142 157

1 appliance niche 96 - 108 cm MGN60110 60 35 40 49 62 85 109 142 157

MGN76110 76 35 40 49 62 85 109 142 157

1 appliance niche 109 - 122 cm MGN60124 60 35 40 49 62 85 109 142 157

MGN76124 76 35 40 49 62 85 109 142 157

Bracket for appliance per pair

1 pair of steel appliance brackets GUWIN 44
6 x 6 cm, 50 cm long
for receiving appliances
For optimising gaps (min. 0.3 cm)
between two appliances.
Installation on site.

2 appliances can be placed in one niche if

GUWIN is ordered in addition.
For the relevant appliance niche MGN.. both
appliance types must be stated.

The front above appliance niches MGN.. is height adjusted to the appliance without joint.

39.08 1/2022
 Price group
Modules Appliance double niche (open)
for carcase height 145.75 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance double niche .
(open)

1 appliance double niche 96 - 104 cm MGN60106D 60 35 40 49 62 85 109 142 157

MGN76106D 76 35 40 49 62 85 109 142 157

Price group
Modules Appliance double niche (open)
for carcase heights 190.65 / 203.9 / 217.15 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance double niche .
(open)

1 appliance double niche 66 - 76 cm MGN6084D 60 35 40 49 62 85 109 142 157

MGN7684D 76 35 40 49 62 85 109 142 157

1 appliance double niche 82 - 95 cm MGN6097D 60 35 40 49 62 85 109 142 157

MGN7697D 76 35 40 49 62 85 109 142 157

1 appliance double niche 96 - 108 cm MGN60110D 60 35 40 49 62 85 109 142 157

MGN76110D 76 35 40 49 62 85 109 142 157

1 appliance double niche 109 - 122 cm MGN60124D 60 35 40 49 62 85 109 142 157

MGN76124D 76 35 40 49 62 85 109 142 157

The front above appliance niches MGN..D is height adjusted to the appliance without joint.
When 2 appliances are used, then the thickness of a 2 cm intermediate shelf has to be added according to the type of the overall niche height. For stackable
appliances or those which permit the use of guide rails, this addition is not necessary. Guide rails are an accessory and are fitted during installation. Please
order accordingly.

Price group
Modules Appliance niche with lift-up door

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance niche with MGK6040 60 200 201 218 245 287 332 354 384
lift-up door MGK7640 76 200 201 218 245 287 332 354 384
1 lift-up door 39.5 cm high
for appliance niche 33 cm high
and 49 cm wide

The appropriate appliance niche must be

increased in height to the module planning
dimension MGK.. (= lift-up door height).

Module Appliance niche with MGK6046 60 209 212 232 260 309 256 367 406
lift-up door MGK7646 76 209 212 232 260 309 256 367 406
1 lift-up door 46 cm high
for appliance niche 40 cm high

The appropriate appliance niche must be

increased in height to the module planning
dimension MGK.. (= lift-up door height).

Module Appliance niche with MGK6060 60 234 234 256 284 341 297 412 463
lift-up door MGK7660 76 234 234 256 284 341 297 412 463
1 lift-up door 59.5 cm high
for appliance niche 53 cm high
and 49 cm wide

The appropriate appliance niche must be

increased in height to the module planning
dimension MGK.. (= lift-up door height).

1/2022 39.09
 Price group
Modules Appliance niche with door

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance niche with .
door

1 door 74.25 cm high in front of MGT6075 L/R 60 97 114 145 187 237 284 358 391
appliance niche 72 cm MGT7675 L/R 76 97 114 145 187 237 284 358 391
Cupboard width 76 cm:
Diagram shows L
Not available in IOS-C, IOS-M-C

1 door 79.25 cm high in front of MGT6080 L/R 60 97 114 145 187 237 284 358 391
appliance niche 72 cm MGT7680 L/R 76 97 114 145 187 237 284 358 391
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 92.5 cm high in front of MGT6093 L/R 60 110 123 157 200 256 312 390 435
appliance niche 88 cm MGT7693 L/R 76 110 123 157 200 256 312 390 435
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 97.65 cm high in front of MGT6098 L/R 60 114 130 165 211 270 329 402 451
appliance niche 88 cm MGT7698 L/R 76 114 130 165 211 270 329 402 451
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 106.0 cm high in front of MGT60106 L/R 60 118 140 175 221 285 349 420 463
appliance niche 103 cm MGT76106 L/R 76 118 140 175 221 285 349 420 463
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 110.9 cm high in front of MGT60111 L/R 60 123 145 185 232 303 372 431 478
appliance niche 103 cm MGT76111 L/R 76 123 145 185 232 303 372 431 478
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 124.15 cm high in front of MGT60125 L/R 60 133 151 191 244 320 393 447 491
appliance niche 122 cm MGT76125 L/R 76 133 151 191 244 320 393 447 491
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door 137.4 cm high in front of MGT60138 L/R 60 142 157 200 254 332 412 461 504
appliance niche 122 cm MGT76138 L/R 76 142 157 200 254 332 412 461 504
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

1 door strapped together or Front line 80 cm

1 door 145.5 cm high in front of MGT601468 L/R 60 160 177 229 286 377 467 517 558
appliance niche 140 cm MGT761468 L/R 76 160 177 229 286 377 467 517 558
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

2 doors or 1 door 150.65 cm high MGT60151 L/R 60 147 164 210 264 347 431 476 514
in front of appliance niche 140 cm MGT76151 L/R 76 147 164 210 264 347 431 476 514
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

2 doors or 1 door strapped together or MGT60164 L/R 60 177 193 241 296 384 473 522 564
1 door 163.9 cm high in front of MGT76164 L/R 76 177 193 241 296 384 473 522 564
appliance niche 158 cm
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

2 doors or 1 door strapped together or MGT60178 L/R 60 193 211 263 315 409 504 556 603
1 door 177.15 cm high in front of MGT76178 L/R 76 193 211 263 315 409 504 556 603
appliance niche 175 cm
Cupboard width 76 cm:
Not available in IOS-C, IOS-M-C

39.10 1/2022
 Price group
Modules Appliance niche with door

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
2 doors or 1 door strapped together or Front line 80 cm
1 door 190.4 cm high in front of MGT601908 L/R 60 245 295 382 499 587 675 776 858
appliance niche 178 cm MGT761908 L/R 76 245 295 382 499 587 675 776 858
1 support hinge SSCH
Cupboard width 76 cm:
when the front projects more than 26 cm
Not available in IOS-C, IOS-M-C
from the appliance

2 doors or 1 door strapped together or Front line 80 cm

1 door 203.65 cm high in front of MGT602048 L/R 60 263 311 407 528 618 708 817 903
appliance niche 178 cm MGT762048 L/R 76 263 311 407 528 618 708 817 903
1 support hinge SSCH
Cupboard width 76 cm:
when the front projects more than 26 cm
Not available in IOS-C, IOS-M-C
from the appliance

2 doors or 1 door strapped together or Front line 80 cm

1 door 216.9 cm high in front of MGT602178 L/R 60 307 369 473 636 733 829 938 1034
appliance niche 178 cm MGT762178 L/R 76 307 369 473 636 733 829 938 1034
1 support hinge SSCH
Cupboard width 76 cm:
when the front projects more than 26 cm
Not available in IOS-C, IOS-M-C
from the appliance

The appropriate appliance niche must be

increased in height to the module planning
dimension MGT.. (= door height).

Cutout for wine cooler ANGTRAUS 197

Cutout dimensions adapted to wine cooler
Not available in IOS-C, IOS-M-C, SOLID-C, VALAIS-C
For wine coolers from Liebherr, Gaggenau and Miele.
Processing for MGT .. .

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

1/2022 39.11
 Price group
Modules Appliance niche with door
Processing / Accessories

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Front alignment fitting FRAUSR 97
When the door protrudes more than 26 cm
Not available in IOS-C, IOS-M-C, VALAIS-C
above the appliance, we recommend a
front alignment fitting.
Max. overhang one third of front height!

Change of appliance position ANGPM 75

h1 In order to keep the front overhang relating to
the appliance front as small as possible (smaller
than 26 cm), the appliance is placed on an
additional shelf in the centre of the front.

Applicable for ergonomic reasons or as an

alternative to the front alignment fitting.

h2

h1 = h2

Support hinge for fridge and freezers ZSSCH 32

with appliance hinge
1 support hinge with base plate
for fitting on site
for additional requirement

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

39.12 1/2022
 Price group
Modules Above
Modules heights 27, 40, 53, 66, 80 and 93 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Above 27 MO6027K 60 67 75 90 108 138 168 209 232
module height 27 cm MO7627K 76 67 75 90 108 138 168 209 232
1 top hinged door

Module Above 40 MO6040T L/R 60 63 70 91 110 146 182 234 261

module height 40 cm MO7640T L/R 76 63 70 91 110 146 182 234 261
1 door
Cupboard width 76 cm:
1 adjustable shelf
Not available in IOS-C, IOS-M-C
Diagram shows L

Module Above 40 MO6040K 60 92 99 118 134 173 210 261 287

module height 40 cm MO7640K 76 92 99 118 134 173 210 261 287
1 top hinged door
1 adjustable shelf

Module Above 53 MO6053T L/R 60 77 92 111 132 178 222 255 300
module height 53 cm MO7653T L/R 76 77 92 111 132 178 222 255 300
1 door
Cupboard width 76 cm:
1 adjustable shelf
Not available in IOS-C, IOS-M-C
Diagram shows L

Module Above 53 MO6053K 60 114 123 144 168 212 259 290 331
module height 53 cm MO7653K 76 114 123 144 168 212 259 290 331
1 top hinged door
1 adjustable shelf

Module Above 66 MO6066T L/R 60 111 117 140 165 213 263 314 346
module height 66 cm MO7666T L/R 76 111 117 140 165 213 263 314 346
1 door
Cupboard width 76 cm:
2 adjustable shelves
Not available in IOS-C, IOS-M-C

Diagram shows L

Module Above 80 MO6080T L/R 60 119 128 152 179 231 279 332 370
module height 80 cm MO7680T L/R 76 119 128 152 179 231 279 332 370
1 door
Cupboard width 76 cm:
2 adjustable shelves
Not available in IOS-C, IOS-M-C

Diagram shows L

Module Above 93 MO6093T L/R 60 145 154 179 208 264 318 378 430
module height 93 cm MO7693T L/R 76 145 154 179 208 264 318 378 430
1 door
Cupboard width 76 cm:
3 adjustable shelves
Not available in IOS-C, IOS-M-C

Diagram shows L

Front line aligned ANFLIN L/R 0

the front height of the upper module
is exactly the same height as that of
the adjoining cupboard

State required alignment to neighbouring

cupboard left or right.
Only valid for modular tall units.

1/2022 39.13
 Price group
Basic units for modular tall units
Carcase heights 145.75 / 190.65 / 203.9 / 217.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Basic unit Carcase height 145.75 cm
for furnishing with modules VHM30146 30 199 199 199 199 199 199 199 199
MU ... and MO ... VHM45146 45 217 217 217 217 217 217 217 217
VHM50146 50 225 225 225 225 225 225 225 225
VHM60146 60 239 239 239 239 239 239 239 239

Basic unit Carcase height 190.65 cm

for furnishing with modules VHM30190 30 232 232 232 232 232 232 232 232
MU ... and MO ... VHM45190 45 241 241 241 241 241 241 241 241
VHM50190 50 248 248 248 248 248 248 248 248
VHM60190 60 261 261 261 261 261 261 261 261

Basic unit Carcase height 203.9 cm

for furnishing with modules VHM30204 30 235 235 235 235 235 235 235 235
MU ... and MO ... VHM45204 45 245 245 245 245 245 245 245 245
VHM50204 50 251 251 251 251 251 251 251 251
VHM60204 60 268 268 268 268 268 268 268 268

Basic unit Carcase height 217.15 cm

for furnishing with modules VHM30217 30 243 243 243 243 243 243 243 243
MU ... and MO ... VHM45217 45 261 261 261 261 261 261 261 261
VHM50217 50 268 268 268 268 268 268 268 268
VHM60217 60 277 277 277 277 277 277 277 277

Extra charge for tall units MPH1B 156 156 156 156 156 156 156 156
up to width 76 cm

Valid for all tall units and modular

tall units.

Programme TOCCO-A and TOCCO-C one-sided with thick edge.

39.14 1/2022
 Price group
Modules Below
Module height 80 cm

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Below 80 MU3080T L/R 30 113 118 141 163 205 246 290 322
module height 80 cm MU4580T L/R 45 115 122 145 170 217 266 312 348
1 door MU5080T L/R 50 117 123 147 173 221 271 318 357
2 adjustable shelves MU6080T L/R 60 119 128 152 179 231 279 332 370

Diagram shows L

Module Below 80 MU3080Z 30 208 214 234 259 303 348 395 427
module height 80 cm MU4580Z 45 213 220 241 271 323 378 425 461
1 pullout MU5080Z 50 216 224 245 276 329 387 435 470
MU6080Z 60 220 231 253 285 342 398 454 492

Module Below 80 MU3080ZIZ 30 347 349 375 394 439 481 526 562
module height 80 cm MU4580ZIZ 45 356 360 387 409 463 522 569 607
1 pullout MU5080ZIZ 50 361 367 393 419 472 533 581 620
1 inner pullout MU6080ZIZ 60 369 379 405 434 493 550 607 645

Module Below 80 MU3080ST L/R 30 222 231 263 299 362 425 482 522
module height 80 cm MU4580ST L/R 45 227 238 272 311 385 461 519 566
1 drawer MU5080ST L/R 50 231 242 276 318 392 470 530 576
1 door MU6080ST L/R 60 236 249 284 330 407 485 555 600
2 adjustable shelves

Diagram shows L

Module Below 80 MU3080SZ 30 304 313 344 379 444 507 566 603
module height 80 cm MU4580SZ 45 312 325 355 396 467 549 607 651
1 drawer MU5080SZ 50 317 331 360 403 477 560 621 665
1 pullout MU6080SZ 60 326 341 372 418 499 578 649 692

Module Below 80 MU3080SZIZ 30 448 453 483 517 578 639 695 736
module height 80 cm MU4580SZIZ 45 458 465 499 538 611 694 748 795
1 drawer MU5080SZIZ 50 464 474 508 549 624 708 766 812
1 pullout MU6080SZIZ 60 475 491 523 570 650 732 800 845
1 inner pullout

Module Below 80 MU3080SZ2 30 442 456 496 535 640 743 808 869
module height 80 cm MU4580SZ2 45 451 469 512 557 677 808 870 939
1 drawer MU5080SZ2 50 458 479 519 570 691 824 891 959
2 pullouts MU6080SZ2 60 467 495 537 588 721 850 930 998

Module Below 80 MU3080S2Z 30 390 404 442 484 565 640 709 723
module height 80 cm MU4580S2Z 45 398 417 454 506 596 695 763 780
2 drawers MU5080S2Z 50 404 426 461 516 608 709 782 797
1 pullout MU6080S2Z 60 414 440 476 533 633 733 817 829

Module Below 80 MU3080S2Z2 30 545 566 606 656 749 841 970 1025
module height 80 cm MU4580S2Z2 45 558 582 625 683 793 913 1043 1106
2 drawers MU5080S2Z2 50 567 594 634 697 808 932 1068 1130
2 pullouts MU6080S2Z2 60 579 612 656 723 842 961 1115 1178

Module Below 80 MU3080Z2 30 311 320 351 386 474 564 643 695
module height 80 cm MU4580Z2 45 320 329 361 400 503 611 692 751
2 pullouts MU5080Z2 50 325 335 367 408 513 625 708 766
MU6080Z2 60 332 346 379 424 533 643 740 799

Module Below 80 MU3080Z3 30 437 456 494 533 616 695 823 874
module height 80 cm MU4580Z3 45 448 469 510 557 651 755 886 943
3 pullouts MU5080Z3 50 455 479 517 569 665 770 908 963
MU6080Z3 60 464 495 535 587 692 796 948 1002

1/2022 39.15
 Price group
Modules Above

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Above 27 MO3027K 30 63 69 83 96 121 147 182 202
module height 27 cm MO4527K 45 65 71 86 101 128 159 196 217
1 top hinged door MO5027K 50 66 74 87 103 131 162 201 222
MO6027K 60 67 75 90 108 138 168 209 232

Module Above 40 MO3040T L/R 30 59 66 84 98 129 160 203 226

module height 40 cm MO4540T L/R 45 62 68 87 103 138 173 218 246
1 door MO5040T L/R 50 62 68 88 105 141 177 224 250
1 adjustable shelf MO6040T L/R 60 63 70 91 110 146 182 234 261
Diagram shows L

Module Above 40 MO3040K 30 87 92 110 122 153 184 226 250

module height 40 cm MO4540K 45 89 94 113 127 163 200 245 269
1 top hinged door MO5040K 50 90 96 115 129 166 204 250 275
1 adjustable shelf MO6040K 60 92 99 118 134 173 210 261 287

Module Above 53 MO3053T L/R 30 71 85 102 120 159 195 222 260
module height 53 cm MO4553T L/R 45 73 88 105 125 168 211 239 280
1 door MO5053T L/R 50 74 89 108 127 171 215 245 286
1 adjustable shelf MO6053T L/R 60 77 92 111 132 178 222 255 300

Diagram shows L

Module Above 53 MO3053K 30 107 115 133 151 190 226 252 290
module height 53 cm MO4553K 45 110 118 138 158 201 246 270 313
1 top hinged door MO5053K 50 112 120 140 161 204 251 276 318
1 adjustable shelf MO6053K 60 114 123 144 168 212 259 290 331

Module Above 66 MO3066T L/R 30 103 109 128 149 190 230 272 302
module height 66 cm MO4566T L/R 45 107 112 132 156 202 250 294 326
1 door MO5066T L/R 50 109 114 135 159 205 255 301 332
2 adjustable shelves MO6066T L/R 60 111 117 140 165 213 263 314 346

Diagram shows L

Module Above 72 MO3072T L/R 30 108 114 135 156 197 238 281 312
module height 72 cm MO4572T L/R 45 111 116 140 162 209 259 304 336
1 door MO5072T L/R 50 112 118 142 165 212 264 311 344
2 adjustable shelves MO6072T L/R 60 116 123 149 174 225 275 328 364

Diagram shows L

Module Above 80 MO3080T L/R 30 113 118 141 163 205 246 290 322
module height 80 cm MO4580T L/R 45 115 122 145 170 217 266 312 348
1 door MO5080T L/R 50 117 123 147 173 221 271 318 357
2 adjustable shelves MO6080T L/R 60 119 128 152 179 231 279 332 370

Diagram shows L

Module Above 85 MO3085T L/R 30 123 130 153 177 219 262 310 348
module height 85 cm MO4585T L/R 45 126 135 158 184 233 283 332 375
1 door MO5085T L/R 50 128 139 160 188 237 291 341 384
2 adjustable shelves MO6085T L/R 60 131 143 165 194 248 300 357 400

Diagram shows L

Module Above 93 MO3093T L/R 30 136 143 166 189 235 277 329 374
module height 93 cm MO4593T L/R 45 141 147 171 197 249 303 356 405
1 door MO5093T L/R 50 142 150 173 201 253 309 363 414
3 adjustable shelves MO6093T L/R 60 145 154 179 208 264 318 378 430

Diagram shows L

Module Above 98 MO3098T L/R 30 144 153 175 201 245 287 334 379
module height 98 cm MO4598T L/R 45 147 159 179 209 259 312 361 410
1 door MO5098T L/R 50 149 161 183 213 264 317 368 419
3 adjustable shelves MO6098T L/R 60 152 166 190 221 274 328 385 435

Diagram shows L

39.16 1/2022
 Price group
Modules Above

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Above 111 MO30111T L/R 30 163 181 201 234 272 312 349 394
module height 111 cm MO45111T L/R 45 168 187 207 244 288 338 375 426
1 door MO50111T L/R 50 170 191 210 249 295 346 384 434
3 adjustable shelves MO60111T L/R 60 174 197 216 257 307 357 401 454

Diagram shows L

Module Above 125 MO30125T L/R 30 191 211 234 266 302 336 379 427
module height 125 cm MO45125T L/R 45 195 217 242 278 318 366 409 461
1 door MO50125T L/R 50 199 222 246 283 326 373 419 472
3 adjustable shelves MO60125T L/R 60 203 229 254 295 338 385 436 490

Diagram shows L

Module Above 138 MO30138T L/R 30 223 247 275 336 392 446 491 548
module height 138 cm MO45138T L/R 45 229 254 284 353 416 485 528 591
1 door MO50138T L/R 50 233 259 290 360 424 495 542 605
4 adjustable shelves MO60138T L/R 60 238 266 300 372 440 511 566 630

Diagram shows L

Module Above 151 MO30151T L/R 30 257 280 318 408 483 556 602 670
module height 151 cm MO45151T L/R 45 264 290 329 425 511 605 647 724
1 door MO50151T L/R 50 267 296 333 433 522 617 663 739
4 adjustable shelves MO60151T L/R 60 273 305 345 449 543 636 692 769

Diagram shows L

1/2022 39.17
 Price group
Tall unit top cupboards
Carcase height 26.5 / 39.75 / 53.0 / 66.25 / 79.5 / 92.75 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit top cupboard VHAK3027 30 152 156 172 183 222 256 282 302
Carcase height 26.5 cm VHAK4527 45 164 170 182 199 239 281 303 326
1 top hinged door VHAK5027 50 166 174 188 207 244 285 312 338
VHAK6027 60 173 181 196 218 255 295 323 347
No wall fixing. VHAK7027 70 182 192 212 242 280 313 346 375
VHAK7627 76 189 207 220 267 300 336 369 401
VHAK8027 80 224 245 265 305 354 400 444 481
VHAK9127 91 280 305 331 392 446 499 556 600

Tall unit top cupboard VHA3040 L/R 30 159 164 177 193 232 270 298 320
Carcase height 39.75 cm VHA4540 L/R 45 168 173 190 212 251 296 332 356
1 door VHA5040 L/R 50 171 179 200 219 270 317 339 360
1 adjustable shelf VHA6040 L/R 60 179 189 213 232 280 326 356 382
Diagram shows L
No wall fixing.

Tall unit top cupboard VHAK3040 30 171 176 189 211 244 282 311 333
Carcase height 39.75 cm VHAK4540 45 179 184 207 224 268 308 345 369
1 top hinged door VHAK5040 50 182 191 216 231 281 331 351 374
1 adjustable shelf VHAK6040 60 191 205 225 243 292 340 369 394
VHAK7040 70 208 222 234 286 321 356 392 423
No wall fixing. VHAK7640 76 215 226 240 297 338 376 415 449
VHAK8040 80 240 263 284 343 389 433 484 523
VHAK9140 91 292 325 357 425 485 547 626 677

Tall unit top cupboard VHA3053 L/R 30 182 190 215 230 255 284 327 347
Carcase height 53.0 cm VHA4553 L/R 45 184 195 218 251 286 318 339 387
1 door VHA5053 L/R 50 193 203 221 254 306 359 370 392
1 adjustable shelf VHA6053 L/R 60 200 213 230 270 314 361 393 424
VHA7053 L/R 70 240 259 285 338 375 413 499 539
Diagram shows L No wall fixing. VHA7653 L/R 76 270 290 320 384 409 436 551 597
Cupboard width 70, 76 cm:
Not available in IOS-C, IOS-M-C

Tall unit top cupboard VHA3066 L/R 30 226 270 287 298 312 329 367 378
Carcase height 66.25 cm VHA4566 L/R 45 230 277 293 306 333 357 402 427
1 door VHA5066 L/R 50 236 280 296 323 357 393 409 431
2 adjustable shelves VHA6066 L/R 60 239 283 301 327 361 396 433 467
VHA7066 L/R 70 301 368 397 418 446 470 558 600
Diagram shows L No wall fixing. VHA7666 L/R 76 335 413 445 463 486 512 620 668
Cupboard width 70, 76 cm:
Not available in IOS-C, IOS-M-C

Tall unit top cupboard VHA3080 L/R 30 251 280 301 321 347 371 424 446
Carcase height 79.5 cm VHA4580 L/R 45 256 284 304 332 361 393 457 489
1 door VHA5080 L/R 50 263 291 312 349 395 440 482 512
2 adjustable shelves VHA6080 L/R 60 268 294 320 354 400 446 491 527
VHA7080 L/R 70 343 384 418 458 499 539 643 693
Diagram shows L No wall fixing. VHA7680 L/R 76 379 428 466 509 546 584 721 778
Cupboard width 70, 76 cm:
Not available in IOS-C, IOS-M-C

Tall unit top cupboard VHA3093 L/R 30 280 287 313 352 384 415 481 513
Carcase height 92.75 cm VHA4593 L/R 45 282 293 321 370 413 454 517 555
1 door VHA5093 L/R 50 287 296 326 372 432 491 521 557
3 adjustable shelves VHA6093 L/R 60 292 306 335 390 443 495 548 588
VHA7093 L/R 70 382 401 440 513 562 611 729 785
No wall fixing. VHA7693 L/R 76 425 449 493 575 622 670 821 887
Diagram shows L
Cupboard width 70, 76 cm:
Not available in IOS-C, IOS-M-C

Programme TOCCO-A and TOCCO-C one-sided with thick edge at widths of 76 and 91 cm.

39.18 1/2022
 Price group
Blenders

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 145.75 cm
Front finish HP20146 L/R 20 81 87 95 104 115 124 128 138

Front finish blenders are manufactured with a maximum Carcase height 190.65 cm
20 cm width. Please make up larger dimension blenders HP20190 L/R 20 95 102 111 117 129 143 148 159
from rear panels in front finish RWF .. .
Laminate decors with horizontal texture are made, Carcase height 203.9 cm
starting from a blender height of 204 cm, in divided HP20204 L/R 20 100 114 119 127 142 158 161 174
style (front line 80 cm) and depending on the material,
at no extra charge. Carcase height 217.15 cm
Diagram shows L
Programmes SOLID-C and VALAIS-C in divided style HP20217 L/R 20 115 127 131 143 164 182 189 207
from blender height 190 cm (front line 80 cm).
Carcase height 230 cm
HP20230 L/R 20 131 154 158 173 199 225 237 247

Carcase height 250 cm

HP20250 L/R 20 159 193 199 220 249 291 311 313

Tall unit corner blender 90° Carcase height 145.75 cm

Front finish HPE146 10 158 171 186 194 218 237 247 275
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width Carcase height 190.65 cm
HPE190 10 194 218 229 240 270 295 304 333
Please note: With use of handles deeper than
3 cm, the relevant leg length must be at least Carcase height 203.9 cm
7 cm. See sketch. HPE204 10 211 232 248 268 298 330 341 364
Flush with front.
Please state rear length (inside measurement) Carcase height 217.15 cm
from l to r on order. HPE217 10 221 246 259 283 323 360 370 401
7 Laminate decors with horizontal texture are made,
starting from a blender height of 204 cm, in divided Carcase height 230 cm
style (front line 80 cm) and depending on the material, HPE230 10 238 271 280 299 346 392 414 451
7

at no extra charge.
Programmes SOLID-C and VALAIS-C in divided style Carcase height 250 cm
from blender height 190 cm (front line 80 cm). HPE250 10 267 304 313 325 384 442 481 525

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 145.75 cm

Front finish HPEW146 10 168 181 199 204 227 248 265 286
Freely selectable angle up to max. 270°
(Programme BOSSA-C permitted up to 180°) Carcase height 190.65 cm
and freely selectable leg measurement from HPEW190 10 201 223 235 242 273 298 307 335
3 x 3 cm up to 10 x 10 cm width
Carcase height 203.9 cm
Flush with front. HPEW204 10 216 238 256 271 302 338 343 369
Please state rear length (inside measurement)
from l to r on order. Carcase height 217.15 cm
3 Laminate decors with horizontal texture are made, HPEW217 10 236 263 277 297 336 374 385 416
starting from a blender height of 204 cm, in divided
3

style (front line 80 cm) and depending on the material, Carcase height 230 cm
at no extra charge. HPEW230 10 247 282 292 327 370 414 435 464
Programmes SOLID-C and VALAIS-C in divided style
from blender height 190 cm (front line 80 cm). Carcase height 250 cm
HPEW250 10 268 313 316 372 423 475 512 540
Carcase height 145.75 / 190.65 / 203.9 / 217.15 / 230 / 250 cm:
Not available in IOS-C, IOS-M-C

Extra charge MPHP5 5 24 26 26 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

1/2022 39.19
 Price group
Blenders

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Divided blender .
available for HP.., HPE.. and HPEW..

Division of blender at 79.5 cm height MPPGT80 39

MP PGT 80
Division of blender at 66.25 cm height MPPGT66 39
MP PGT 66
MP PGT 53 Division of blender at 53.0 cm height MPPGT53 39

Several divisions are possible.

Example: 1x HPE 204

1x MP PGT 80
MP PGT 80 1x MP PGT 53
MP PGT 53

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 145.75 cm
flush with carcase HSB20146 20 46 49 53 72 77 82 99 67

Carcase height 190.65 cm

HSB20190 20 53 55 68 87 94 101 118 81

Carcase height 203.9 cm

HSB20204 20 58 60 70 90 98 105 123 83

Carcase height 217.15 cm

HSB20217 20 62 68 77 102 110 117 139 96

Carcase height 230 cm

HSB20230 20 65 71 83 109 117 124 148 102

39.20 1/2022
CONTINO
Tall units with horizontal recessed handles

Carcase height 154,15 cm 40. Chapter

For CARCASE LINE 73 / 86

Carcase height 197,4 cm 41. Chapter

Carcase height 210,65 cm 42. Chapter

Carcase height 223,9 cm 43. Chapter

Modular housing units 44. Chapter

CONTINO
Tall units
4.

Carcase height 154,15 cm 45. Chapter

For CARCASE LINE 80

Carcase height 190,65 cm 46. Chapter

Carcase height 203,9 cm 47. Chapter

Carcase height 217,15 cm 48. Chapter

Modular housing units 49. Chapter

1/2022 4.
 CONTINO
Tall units with horizontal recessed handles – type logic

Article definition Dimension definition Front definition/

function equipment

Tall unit Width / Height / Depth* VZ large capacity pullout

Z pullout
IS interior drawer (2x)

CH 30 204 * VZZIS2
CH 30 204 VZZIS2 * depth only if different from standard 58 cm
CONTINO
Tall units

4.

Housing unit Width / Height / Niche* IS interior drawer

with door in front of recess X grip handle at 150 cm height

CHGT 60 204 12 ISX

CHGT 60 204 12 ISX * D double niche
M with lift-up flap (Micro)

Housing unit with open recess Width / Height / Niche* Z pullout

CHG 60 204 11D Z

CHG 60 204 11D Z * D double niche
M with lift-up flap (Micro)

Article definition Front definition / function equipment

CH tall unit GVZ pharmacy tall unit

CHA tall unit top cupboard HW housekeeping tall unit
CHAK tall unit top cupboard with flap IS interior drawer
CHGA dishwasher top cupboard IZ interior pullout
CHM modular tall unit K flap
CHP tall unit blender N Niche door
CHPE tall unit corner blender S drawer
CHPEW tall unit corner blender 135º S Sesam
CHR / CH3R / HR / H3R tall shelf unit VZ large capacity pullout
CHW tall unit end panel X grip handle at 150 cm height
CTGSU dishwasher sub- structure Z pullout
CHGA dishwasher top cupboard
CHGM modular housing unit
CHG housing unit with open recess
CHGT housing unite with door in front of recess

4. 1/2022
CONTINO

154.15 cm
Tall units, carcase height 154.15 cm

CONTINO
Tall units
40.

CARCASE LINE 73 CARCASE LINE 86

Tall units 40. 01

Housing units 40. 02

Elevated dishwashers 40. 03

Tall shelf units 40. 04

Tall shelf units, thick 2.8 cm 40. 04

Visible carcase sides 40. 05

End panels 40. 05

Blenders 40. 06

Support panels with plinth 40. 07

Blenders 40. 07

Rear panels 40. 07

1/2022 40.
154.15 cm CONTINO
Tall units, carcase height 154.15 cm
CONTINO
Tall units

T: Cupboard depth cm

40. Function cupboards Housing units Elevated dishwashers Shelves

40.01 T: 36 / 48 / 58 cm 40.02 T: 58 cm 40.03 T: 58 cm 40.04 T: 36 / 58 cm

3,5
CH 30 154 CHG 60 154 6 SZ CTGSU 60 40 Z HR 30 154
CH 45 154 HR 60 154
CH 50 154 13,65–16,65
HR 90 154
CH 60 154
39,75
150,65 69,5

40.01 40.02 40.03 40.04

T: 36 / 48 / 58 cm
3,5
T: 58 cm CGFV 60 75 T: 36 / 58 cm
CH 90 154 CHG 60 154 6 SZ2 CGFV 60 81 H3R 30 154
CH 120 154 H3R 60 154
13,65–16,65 H3R 90 154
26,25
150,65

39,75

40.01 T: 36 / 48 / 58 cm 40.02 T: 58 cm 40.03 T: 58 cm

3,5
CH 30 154 IZ4 CHG 60 154 10D Z CHGA 60 34 Z
CH 45 154 IZ4 CHGA 60 39 Z
CH 50 154 IZ4
CH 60 154 IZ4 8,4–21,4

150,65 39,75

40.01 T: 36 / 48 / 58 cm 40.02 T: 58 cm
CH 90 154 IZ4 CHGT 60 154 12 IS
CHGTI 60 154 12 IS
150,65

150,65

40.01 T: 58 cm 40.02 T: 58 cm
CH 30 154 VZ CHGT 60 154 14
CH 45 154 VZ CHGTI 60 154 14

150,65 150,65

40.01
CH 30 154 N
CH 45 154 N
CH 50 154 N
CH 60 154 N
150,65

40. 1/2022
 Price group
Tall units
Carcase height 154.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit CH30154 L/R 30 464 493 521 585 652 719 799 871
1 door CH45154 L/R 45 482 515 539 635 705 774 876 954
4 adjustable shelves CH50154 L/R 50 498 527 553 670 741 813 906 986
CH60154 L/R 60 527 558 606 714 792 868 970 1057
Finishing top necessary, see page 81.04
and chapter 71.
150,65

Diagram shows L

Storage unit CH90154 90 823 877 915 1081 1198 1315 1486 1621
2 doors CH120154 120 1119 1194 1224 1447 1605 1762 2004 2184
4 adjustable shelves

With 120 cm width shelves 2.8 cm thick.

Finishing top necessary, see page 81.04
150,65

and chapter 71.

Tall storage unit CH30154IZ4 L/R 30 1025 1061 1083 1156 1225 1293 1406 1530
1 door CH45154IZ4 L/R 45 1041 1073 1098 1193 1263 1331 1433 1562
4 inner pullouts CH50154IZ4 L/R 50 1057 1087 1112 1229 1300 1368 1463 1593
CH60154IZ4 L/R 60 1087 1116 1165 1272 1350 1427 1529 1668
Finishing top necessary, see page 81.04
and chapter 71.
150,65

Diagram shows L
Exchange wide angle hinge ANIGE 0
through standard hinge, with spacer strip

Tall storage unit CH90154IZ4 90 1415 1470 1508 1674 1792 1908 2078 2265
2 doors
4 inner pullouts

Finishing top necessary, see page 81.04

and chapter 71.
150,65

Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Storage unit CH30154VZ 30 1031 1090 1106 1198 1252 1306 1385 1509
1 large capacity pullout with front panel CH45154VZ 45 1131 1194 1208 1330 1393 1454 1540 1678
5 adjustable wire baskets with glass bottoms

Max. loading 15 kg per basket.

Finishing top necessary, see page 81.04
150,65 and chapter 71.

VZ-premium equipment MPVZ30P5 110

Frame inside faced in carcase style MPVZ45P5 153
5 adjustable shelves with glass sides

Niche door CH30154N L/R 30 293 342 330 396 451 504 559 609
1 door with original recessed handle CH45154N L/R 45 314 346 348 407 476 546 587 641
and attached plinth CH50154N L/R 50 320 357 355 443 514 583 641 698
no rear panel CH60154N L/R 60 331 367 372 463 538 611 683 744
no floor
150,65

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
Finishing top necessary, see page 81.04
Diagram shows L and chapter 71.

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 40.01
 Price group
Housing units
Carcase height 154.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
3,5 Housing unit CHG601546SZ 60 866 910 970 1056 1194 1331 1465 1575
1 recessed handle 3.5 cm
1 blender 3.5 cm Modular parts list
13,65–16,65 1 appliance niche 57-60 cm CHGM60154
1 drawer CMGN6075B
1 recessed handle 3.5 cm CMU6086SZ
69,5
1 pullout

For ovens.
Finishing top necessary, see page 81.04
and chapter 71.

3,5 Housing unit CHG601546SZ2 60 968 1030 1089 1177 1339 1500 1638 1764
1 recessed handle 3.5 cm
1 blender 3.5 cm Modular parts list
13,65–16,65 1 appliance niche 57-60 cm CHGM60154
26,25
1 drawer CMGN6075B
1 recessed handle 3.5 cm CMU6086SZ2
39,75
1 pullout
1 recessed handle 3.5 cm
1 pullout

For ovens.
Finishing top necessary, see page 81.04
and chapter 71.

3,5 Housing unit CHG6015410DZ 60 603 637 675 721 797 873 977 1043
1 recessed handle 3.5 cm
1 blender 3.5 cm Modular parts list
1 appliance double niche 82-95 cm CHGM60154
8,4–21,4 1 blender CMGN60104DB
1 recessed handle 3.5 cm CMU6047BZ
39,75 1 pullout

For microwave/oven combination (built-in trim kit

will be necessary).
Finishing top necessary, see page 81.04
and chapter 71.

Housing unit CHGT6015412IS L/R 60 485 530 585 646 739 830 884 965
1 recessed handle 3.5 cm
1 door for appliance niche 122 cm with integral ventilation
1 inner drawer CHGTI6015412IS L/R 60 485 530 585 646 739 830 884 965

For integrated fridge and freezer.

150,65 Finishing top necessary, see page 81.04
and chapter 71.
Diagram shows L It is necessary to fit ventilator grille into finishing
top of refrigeration housing.

Housing unit CHGT6015414 L/R 60 410 431 482 539 623 707 755 801
1 recessed handle 3.5 cm
1 door for appliance niche 140 cm with integral ventilation
CHGTI6015414 L/R 60 410 431 482 539 623 707 755 801
For integrated fridge and freezer.
Finishing top necessary, see page 81.04 Modular parts list
150,65 and chapter 71. CHGM60154
It is necessary to fit ventilator grille into finishing CMGT60154
Diagram shows L top of refrigeration housing.

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

40.02 1/2022
 Price group
Elevated dishwashers
Carcase height 154.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Dishwasher support CTGSU6040Z 60 370 383 386 419 459 499 533 581
Carcase height 30 cm
1 pullout with 39.75 cm high front panel
and chamfered edge at the bottom
39,75 for opening
1 drip tray

No recessed handle / horizontal joint 0.25 cm.

IOS-C and IOS-M-C only possible with 0.8 cm joint!

Dishwasher-front Module height 75 cm

for fully integrated dishwasher, Appliance height 82 cm
height 82 or 87 cm. CGFV6075 60 125 130 166 203 240 280 338 367

Please state appliance model on order! Module height 80 cm

Side panel or fixing essential e.g. Appliance height 87 cm
panels or cupboards. CGFV6081 60 125 130 166 203 240 280 338 367

Dishwasher-Top cupboard CHGA6034Z 60 357 367 387 408 454 496 552 603
1 recessed handle 3.5 cm CHGA6039Z 60 357 367 387 408 454 496 552 603
1 pullout
1 recessed handle 3.5 cm

Side panel or fixing essential e.g. panels

or tall units.
Finishing top necessary, see page 81.04
and chapter 71.

1/2022 40.03
 Surface style
Tall shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 154.15 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit Shelf unit depth 36.2 cm
5 adjustable shelves HR3015436 10-30 630 645 714 899 - 998 1147 915
HR6015436 30-60 679 705 787 977 - 1092 1251 997
Widths in mm grid variably available. HR9015436 60-90 728 765 860 1055 - 1186 1355 1079
Please state desired width.
Finishing top necessary, see page 81.04 Shelf unit depth 58.2 cm
and chapter 71. HR30154 10-30 673 689 763 961 - 1067 1226 977
HR60154 30-60 726 753 841 1044 - 1167 1338 1066
HR90154 60-90 778 818 919 1128 - 1268 1449 1154

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.

Surface style
Tall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 154.15 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit, Shelf unit depth 36.2 cm
thick 2.8 cm H3R3015436 10-30 698 713 783 967 1017 1066 1215 992
Back panel with circumferential shadow joint H3R6015436 30-60 748 773 855 1045 1103 1161 1319 1076
3 shelves H3R9015436 60-90 798 833 927 1123 1190 1256 1423 1161

Shelf unit interior colour = shelf unit exterior colour. Shelf unit depth 58.2 cm
Widths in mm grid variably available. H3R30154 10-30 754 769 846 1047 1101 1154 1313 1071
Please state desired width. H3R60154 30-60 803 831 922 1127 1190 1252 1423 1160
Available without extra charge for free standing H3R90154 60-90 852 893 998 1207 1279 1350 1533 1248
planning, optional without back panel with visible
edges at the rear. Please state on order.
Finishing top necessary, see page 81.04
and chapter 71.

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Extra charge for basis shelf unit 58.2 cm deep.

40.04 1/2022
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 154.15 cm
Side depth 34 cm FS15434 L/R 34 0 0 100 144 215 268 139
Side depth 46 cm FS15446 L/R 46 0 0 131 189 267 335 176
Side depth 56 cm FS15456 L/R 56 0 0 131 189 267 335 176
Side depth 61 cm FS15461 L/R 61 0 0 151 218 307 386 204
Side depth 66 cm FS15466 L/R 66 0 0 151 218 307 386 204
Side depth 76 cm FS15476 L/R 76 0 0 159 230 327 409 216
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 154.15 cm
Side depth up to 34 cm FSUEL15434 L/R 34 92 92 192 236 307 360 231
Side depth up to 46 cm FSUEL15446 L/R 46 92 92 223 281 359 427 268
Side depth up to 58 cm FSUEL15458 L/R 58 92 92 223 281 359 427 268
Side depth up to 63 cm FSUEL15463 L/R 63 92 92 243 310 399 478 296
Side depth up to 68 cm FSUEL15468 L/R 68 146 146 297 364 453 532 350
Side depth up to 76 cm FSUEL15476 L/R 76 146 146 305 376 473 555 362
Diagram shows R

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit end panel Carcase height 154.15 cm
Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) CHW515458 5 399 417 473 530 570 607 646 693
Width 5 cm
with recessed handle above

Please state the relevant L/R.

150,65 The end panel width is always 5 cm.

Diagram shows L

Tall unit panel Basic type

with side shelf unit area Depth up to 62.5 cm
1 recessed handle front and side, above CHW1515458R L/R 15 638 665 706 792 865 939 1021 1113
1 fixed front at the front
with side frame in front colour Extra charge interior
3 shelves MPK/KH/KG 0
150,65 Always state interior style, MPFF/PF/VM 169
possible colours see chapter 11! MPFS/ME 248
Diagram shows R
MPFG 402
Without plinth! MPH 328
The plinth end finishes at the last cupboard.
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
VALAIS-C

1/2022 40.05
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 154.15 cm
Front finish with recessed handle above
CHP20154 L/R 20 94 98 103 115 124 132 138 152
Front finish blenders are manufactured with a maximum
20 cm width.
150,65

Diagram shows L

Tall unit corner blender 90° Carcase height 154.15 cm

Front finish with recessed handle above
freely selectable leg measurement CHPE154 10 170 183 204 213 232 249 266 287
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

150,65 Please state rear length (inside measurement)
from l to r on order.
4
4

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 154.15 cm

Front finish with recessed handle above
Freely selectable angle up to max. 270° CHPEW154 10 195 216 234 239 266 288 302 331
(Programme BOSSA-C permitted up to 180°)
Not available in IOS-C, IOS-M-C
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width
150,65
Flush with front.
3 Please state rear length (inside measurement)
from l to r on order.
3

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided blender .
Divided over front height 39.75 cm CANBT40 39
with recessed handle

Divided over front height 69.5 cm CANBT73 39

with recessed handle

Divided over front height 82.75 cm CANBT86 39

with recessed handle

Suitable for blenders.

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

40.06 1/2022
 Surface style
Support panels with plinth Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MC H
Support panel with plinth CHWSP15456 L/R 56 169 169 331 436 478 520 594 461
for blender CHWSP15466 L/R 66 185 185 379 500 546 591 672 527
Thickness 1.6 cm
prepared for connection to
tall unit blenders with
recessed handle milling

Only as accessory type for blenders CHP ..,

not available loose!
Diagram shows R
For use next to appliances or an open niche.
Visible side facing the appliance or the open niche,
please state left/right version.

Support panel with plinth up to

Thickness 1.6 cm HWS15458 L/R 63 142 142 305 411 455 498 572 431
both sides finished HWS15468 L/R 70 163 163 341 462 516 570 653 495

Please state required depth.

Please state whether placed L/R and plinth height.
Fit plinth return (7 mm) on site.
Plinth height 1.5 cm larger for floor adjustment.
Diagram shows R

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 154.15 cm
flush with carcase HSB20154 20 46 49 53 72 77 82 99 67

Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front RWF154 326 355 444 541 709 873 999 1112
in variable sizes
Height up to 153.9 cm Not available in IOS-C, IOS-M-C
Max. width 120 cm
153,9 without recessed handle
with loose plinth

Minimum charged 0.5 metres.

Rear panel in RWF30154 30 181 204 255 311 369 427 477 521
front finish RWF45154 45 192 222 287 355 414 472 537 585
in fixed front sizes RWF50154 50 195 226 294 374 434 494 567 617
without recessed handle RWF60154 60 213 245 321 413 481 550 621 677
with loose plinth old RW .. 154
for carcase height 154.15 cm
153,9

1/2022 40.07
1/2022
CONTINO
Tall units, carcase height 197.4 cm

CARCASE LINE 73 CARCASE LINE 86

CONTINO

197.4 cm
Tall units
Tall units 41. 01-03

Housing units 41. 03-04

41.
Elevated dishwashers 41. 04

Tall shelf units 41. 05

Visible carcase sides 41. 05

End panels 41. 06

Blenders 41. 06-07

Support panels with plinth 41. 07

Blenders 41. 08

Rear panels 41. 08

1/2022 41.
 CONTINO
Tall units, carcase height 197.4 cm
T: Cupboard depth cm

Function cupboards Housing units Elevated dishwashers Shelves

41.01 T: 36 / 48 / 58 cm 41.03 T: 58 cm 41.04 T: 58 cm 41.05 T: 36 / 58 cm

CH 30 197 63,15 CHG 60 197 6 CTGSU 60 40 Z HR 30 197
CH 45 197 60,15
HR 60 197
CH 50 197 HR 90 197
CONTINO

197.4 cm

CH 60 197
Tall units

124,15 3,5

39,75

69,5 69,5

41.01 41.03 41.04

T: 36 / 48 / 58 cm T: 58 cm CGFV 60 75
CH 90 197 CHG 60 197 6 J CGFV 60 81
41. CH 120 197
49,9
46,9
124,15

3,5
69,5

82,75

41.01 T: 58 cm 41.03 T: 58 cm 41.04 T: 58 cm

CH 30 197 ZIZ 53,9
CHG 60 197 11D Z CHGA 60 78
CH 45 197 ZIZ 41,9
CHGA 60 83
CH 50 197 ZIZ
124,15
CH 60 197 ZIZ
3,5

69,5 39,75

41.01 T: 36 / 48 / 58 cm 41.04 T: 58 cm
CH 30 197 Z2 CHGT 60 197 18
CH 45 197 Z2 CHGTI 60 197 18
CH 50 197 Z2
124,15 CH 60 197 Z2 124,15
26,25

39,75 69,5

41.01 T: 36 / 48 / 58 cm
CH 30 197 IZ4
CH 45 197 IZ4
CH 50 197 IZ4
124,15
CH 60 197 IZ4

69,5

41.01 T: 36 / 48 / 58 cm
CH 90 197 IZ4
124,15
69,5

41.02 T: 36 / 48 / 58 cm
CH 30 197 GVZ2
CH 45 197 GVZ2
CH 50 197 GVZ2
124,15 CH 60 197 GVZ2

69,5

41.02 T: 58 cm
CH 30 197 VZZIS
CH 45 197 VZZIS

124,15

69,5

41.02 T: 58 cm
CH 30 197 VZZIS2J
CH 45 197 VZZIS2J
110,9

82,75

41.02 T: 58 cm
CH 45 197 HW
CH 50 197 HW
CH 60 197 HW
124,15

69,5

41.03
CH 30 197 N
CH 45 197 N
CH 50 197 N
CH 60 197 N
124,15
69,5

41. 1/2022
 Price group
Tall units
Carcase height 197.4 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit Front line 73 cm
1 door CH30197 L/R 30 450 472 522 594 662 728 807 879
3 adjustable shelves CH45197 L/R 45 468 495 557 635 712 788 875 953
1 fixed shelf CH50197 L/R 50 476 514 572 677 744 811 920 1004
1 door CH60197 L/R 60 508 547 610 738 810 881 983 1072
124,15 2 adjustable shelves

69,5

Diagram shows L

Storage unit Front line 73 cm

2 doors CH90197 90 796 840 950 1081 1208 1336 1483 1617
3 adjustable shelves CH120197 120 1087 1130 1287 1423 1608 1791 1983 2162
1 fixed shelf
124,15

2 doors
2 adjustable shelves

With 120 cm width shelves 2.8 cm thick.

69,5

The cupboard has knock down fittings and

can be dismantled for access.

Tall storage unit Front line 73 cm

1 door CH30197ZIZ L/R 30 595 609 678 728 813 901 962 1046
3 adjustable shelves CH45197ZIZ L/R 45 607 632 695 774 850 925 1013 1104
1 fixed shelf CH50197ZIZ L/R 50 618 656 714 820 886 953 1065 1160
1 pullout CH60197ZIZ L/R 60 651 691 754 883 954 1025 1128 1229
124,15 1 inner pullout

69,5

Diagram shows L

Tall storage unit Front line 73 cm

1 door CH30197Z2 L/R 30 620 648 698 770 842 913 995 1085
3 adjustable shelves CH45197Z2 L/R 45 648 674 739 820 900 979 1069 1166
1 fixed shelf CH50197Z2 L/R 50 659 696 756 865 937 1006 1120 1220
2 pullouts CH60197Z2 L/R 60 690 733 798 926 1002 1076 1185 1291
124,15
26,25

39,75

Diagram shows L

Tall storage unit Front line 73 cm

1 door CH30197IZ4 L/R 30 959 974 1043 1094 1182 1268 1329 1447
2 adjustable shelves CH45197IZ4 L/R 45 965 992 1054 1132 1210 1285 1370 1495
2 inner pullouts CH50197IZ4 L/R 50 970 1006 1065 1170 1237 1301 1412 1540
1 fixed shelf CH60197IZ4 L/R 60 994 1034 1096 1222 1296 1367 1470 1601
124,15 1 door
2 inner pullouts
69,5

Diagram shows L Exchange wide angle hinge ANIGE 0

through standard hinge, with spacer strip

Tall storage unit Front line 73 cm

2 doors CH90197IZ4 90 1295 1337 1447 1581 1708 1835 1983 2162
2 adjustable shelves
2 inner pullouts
124,15

1 fixed shelf
2 doors
2 inner pullouts
69,5

The cupboard has knock down fittings and

can be dismantled for access.

Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 41.01
 Price group
Tall units
Carcase height 197.4 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Pharmacy tall unit Front line 73 cm
1 pullout with pullout and CH30197GVZ2 30 790 813 861 934 1002 1068 1147 1219
drawer connection CH45197GVZ2 45 833 859 922 1000 1075 1153 1238 1316
1 fixed shelf CH50197GVZ2 50 850 886 944 1051 1117 1184 1295 1376
2 inner drawers CH60197GVZ2 60 868 909 971 1099 1169 1241 1344 1433
124,15 1 pullout
1 fixed shelf
1 inner drawer
69,5
Max. loading 20 kg per pullout / drawer.

Storage unit Front line 73 cm

1 large capacity pullout with front panel CH30197VZZIS 30 931 976 1051 1150 1212 1273 1332 1451
3 adjustable wire baskets with glass bottoms CH45197VZZIS 45 1020 1070 1156 1263 1330 1395 1464 1594
1 fixed shelf
1 pullout
124,15 1 inner drawer
2 loose baskets

69,5 Max. loading 15 kg per basket.

VZ-premium equipment MPVZ30P3 80

Frame inside faced in carcase style MPVZ45P3 109
3 adjustable shelves with glass sides

Storage unit Front line 86 cm

1 large capacity pullout with front panel CH30197VZZIS2J 30 980 1026 1100 1199 1261 1322 1381 1500
3 adjustable wire baskets with glass bottoms CH45197VZZIS2J 45 1071 1122 1208 1314 1381 1447 1516 1646
1 fixed shelf
110,9 1 pullout
2 inner drawers
2 loose baskets

82,75 Max. loading 15 kg per basket.

VZ-premium equipment MPVZ30P3 80

Frame inside faced in carcase style MPVZ45P3 109
3 adjustable shelves with glass sides

Tall utility unit Front line 73 cm

1 door strapped together with CH45197HW L/R 45 474 499 562 631 710 791 878 956
original recessed handle CH50197HW L/R 50 481 520 578 681 748 814 924 1008
1 fixed shelf (depth 41.7 cm) CH60197HW L/R 60 510 548 615 738 811 882 986 1074
1 adjustable function shelf with railing
124,15 (depth 31 cm)
1 hose holder and 3 clamping hooks
2 adjustable shelves (depth 28 cm)
69,5

Diagram shows L

Package vertical shelf HWV 55

1 centre panel next to hinged side,
on two-door cupboards left
Shelf height 160 cm
Shelf width 18.4 cm
Installed in tall utility unit

Available from cupboard height 190 cm and from

cupboard width 50 cm.
Combination with package waste depot possible.

Package waste depot HWWD 111

1 frame with lid for waste bags
at side opposite hinged side,
on two-door cupboards right
1 cloth bag

Combination with package vertical shelf from cupboard

width 50 cm possible.

Package drinks crates storage HW60GA2 77

2 racks for drinks crates made of steel tubing
for fitting in crockery- or utility unit
on site

When used in the utility unit, function shelf, hose rack

and clamping hook are dispensed with in favour of an
adjustable shelf.

41.02 1/2022
 Price group
Tall units
Carcase height 197.4 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Niche door Front line 73 cm
1 door strapped together with original CH30197N L/R 30 354 389 416 489 546 604 686 748
recessed handle and attached plinth CH45197N L/R 45 376 401 440 513 585 659 731 796
no rear panel CH50197N L/R 50 383 414 454 542 622 703 784 855
no floor CH60197N L/R 60 396 428 475 573 659 746 846 922
124,15

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
69,5

Diagram shows L

Divided niche door CANNT40 52

Divided over front height 39.75 cm
with recessed handle

Price group
Housing units
Carcase height 197.4 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit Front line 73 cm
63,15 1 door with „sesame-closure“ CHG601976 L/R 60 602 641 692 766 890 1011 1134 1211
60,15
1 adjustable shelf
1 appliance niche 57-60 cm Modular parts list
1 blender CHGM60197
3,5
1 recessed handle 3.5 cm CMO6053TS
1 door CMGN6068
2 adjustable shelves CMU6077BT
69,5

Diagram shows L „Sesame-closure“ see page 10.10.

For ovens.

Housing unit Front line 86 cm

49,9 1 door with „sesame-closure“ CHG601976J L/R 60 613 645 700 765 887 1004 1156 1233
46,9 1 adjustable shelf
1 appliance niche 57-60 cm Modular parts list
3,5 1 blender CHGM60197
1 recessed handle 3.5 cm CMO6040TS
1 door CMGN6068
2 adjustable shelves CMU6090BT
82,75

Diagram shows L „Sesame-closure“ see page 10.10.

For ovens.

Housing unit CHG6019711DZ L/R 60 633 661 713 767 872 973 1119 1193
53,9
1 door with „sesame-closure“
41,9
1 adjustable shelf Modular parts list
1 appliance double niche 96-108 cm CHGM60197
1 blender CMO6040TS
3,5 1 recessed handle 3.5 cm CMGN60110D
1 pullout CMU6047BZ
39,75
„Sesame-closure“ see page 10.10.
Diagram shows L For microwave (built-in trim kit will be necessary)
and oven or for fridge.

1/2022 41.03
 Price group
Housing units
Carcase height 197.4 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit Front line 73 cm
1 door strapped together for CHGT6019718 L/R 60 515 562 646 753 827 902 998 1063
appliance niche 178 cm
or with integral ventilation
2 doors for appliance niche 178 cm Front line 73 cm
124,15 1 support hinge SSCH CHGTI6019718 L/R 60 515 562 646 753 827 902 998 1063
when the front projects more than 26 cm
from the appliance Modular parts list
69,5
CHGM60197
Diagram shows L Special handle solution see page 10.10. CMGT60197
For integrated fridge and freezer.
Not available in IOS-C, IOS-M-C

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

Price group
Elevated dishwashers
Carcase height 197.4 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Dishwasher support CTGSU6040Z 60 370 383 386 419 459 499 533 581
Carcase height 30 cm
1 pullout with 39.75 cm high front panel
and chamfered edge at the bottom
39,75 for opening
1 drip tray

No recessed handle / horizontal joint 0.25 cm.

IOS-C and IOS-M-C only possible with 0.8 cm joint!

Dishwasher-front Module height 75 cm

for fully integrated dishwasher, Appliance height 82 cm
height 82 or 87 cm. CGFV6075 60 125 130 166 203 240 280 338 367

Please state appliance model on order! Module height 80 cm

Side panel or fixing essential e.g. Appliance height 87 cm
panels or cupboards. CGFV6081 60 125 130 166 203 240 280 338 367

Dishwasher-Top cupboard CHGA6078 L/R 60 370 383 407 439 496 551 613 669
1 door CHGA6083 L/R 60 384 397 423 454 511 568 633 690
2 adjustable shelves
1 recessed handle 3.5 cm

Side panel or fixing essential e.g. panels

or tall units.

Diagram shows L

41.04 1/2022
 Surface style
Tall shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 197.4 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit Shelf unit depth 36.2 cm
6 adjustable shelves HR3019736 10-30 609 639 698 879 - 974 1120 905
HR6019736 30-60 654 692 765 945 - 1057 1210 980
Widths in mm grid variably available. HR9019736 60-90 699 745 832 1011 - 1140 1300 1054
Please state desired width.
Shelf unit depth 58.2 cm
HR30197 10-30 656 690 752 946 - 1049 1204 975
HR60197 30-60 705 746 821 1020 - 1138 1306 1055
HR90197 60-90 754 802 890 1094 - 1227 1408 1134

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 197.4 cm
Side depth 34 cm FS19734 L/R 34 0 0 116 166 227 284 150
Side depth 46 cm FS19746 L/R 46 0 0 134 194 300 375 197
Side depth 56 cm FS19756 L/R 56 0 0 134 194 300 375 197
Side depth 61 cm FS19761 L/R 61 0 0 155 223 345 432 228
Side depth 66 cm FS19766 L/R 66 0 0 155 223 345 432 228
Side depth 76 cm FS19776 L/R 76 0 0 163 237 366 457 240
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 197.4 cm
Side depth up to 34 cm FSUEL19734 L/R 34 92 92 208 258 319 376 242
Side depth up to 46 cm FSUEL19746 L/R 46 92 92 226 286 392 467 289
Side depth up to 58 cm FSUEL19758 L/R 58 92 92 226 286 392 467 289
Side depth up to 63 cm FSUEL19763 L/R 63 92 92 247 315 437 524 320
Side depth up to 68 cm FSUEL19768 L/R 68 146 146 301 369 491 578 374
Side depth up to 76 cm FSUEL19776 L/R 76 146 146 309 383 512 603 386
Diagram shows R

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

1/2022 41.05
 Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit end panel Front line 73 cm
Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) CHW519758 L/R 5 459 483 544 606 649 691 733 785
Width 5 cm
Divided over front height 69.5 cm
124,15
with recessed handle

Please state the relevant L/R.

69,5 The end panel width is always 5 cm.

Diagram shows L

Tall unit end panel Front line 73 cm

Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) CHW519758Z2 L/R 5 537 560 621 683 727 768 811 866
Width 5 cm
Divided over front height 39.75 and 69.5 cm
124,15
with recessed handle

26,25 Please state the relevant L/R.

39,75 The end panel width is always 5 cm.

Diagram shows L

Tall unit panel Basic type

with side shelf unit area Front line 73 cm
1 fixed front at the front Depth up to 62.5 cm
with side frame in front colour CHW1519758R L/R 15 604 628 669 751 822 892 967 1053
124,15 2 shelves
1 recessed handle at the front and side, Extra charge interior
above front height 69.5 cm MPK/KH/KG 0
69,5 1 fixed front at the front MPFF/PF/VM 212
with side frame in front colour MPFS/ME 309
Diagram shows R
1 shelf MPFG 498
Always state interior style, MPH 417
possible colours see chapter 11!
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
VALAIS-C
Without plinth!
The plinth end finishes at the last cupboard.

Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 197.4 cm
Front finish CHP20197 L/R 20 82 97 101 109 121 131 133 148

Front finish blenders are manufactured with a maximum

20 cm width.

197,15

Diagram shows L

Tall unit corner blender 90° Carcase height 197.4 cm

Front finish CHPE197 10 176 193 212 225 250 279 286 311
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
197,15 from l to r on order.

4
4

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

41.06 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit corner blender Carcase height 197.4 cm
Front finish CHPEW197 10 180 200 219 227 254 284 288 313
Freely selectable angle up to max. 270°
Not available in IOS-C, IOS-M-C
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width

197,15 Flush with front.

Please state rear length (inside measurement)
3 from l to r on order.
3

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided blender .
Divided over front height 39.75 cm CANBT40 39
with recessed handle

Divided over front height 69.5 cm CANBT73 39

with recessed handle

Divided over front height 82.75 cm CANBT86 39

with recessed handle

Suitable for blenders.

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

Surface style
Support panels with plinth Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MC H
Support panel with plinth CHWSP19756 L/R 56 186 186 373 491 541 591 675 526
for blender CHWSP19766 L/R 66 204 204 428 565 619 673 765 603
Thickness 1.6 cm
prepared for connection to
tall unit blenders with
recessed handle milling

Only as accessory type for blenders CHP ..,

not available loose!
For use next to appliances or an open niche.
Visible side facing the appliance or the open niche,
Diagram shows R
please state left/right version.

Support panel with plinth up to

Thickness 1.6 cm HWS19758 L/R 63 164 164 351 470 522 573 657 501
both sides finished HWS19768 L/R 70 186 186 396 533 594 655 749 577

Please state required depth.

Please state whether placed L/R and plinth height.
Fit plinth return (7 mm) on site.
Plinth height 1.5 cm larger for floor adjustment.

Diagram shows R

1/2022 41.07
 Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 197.4 cm
flush with carcase HSB20197 20 49 51 59 76 83 89 104 70

Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 73 cm
in variable sizes RWF197 356 408 512 611 757 904 1033 1158
Height up to 197.15 cm
124,15 Not available in IOS-C, IOS-M-C
Max. width 120 cm
without recessed handle
with loose plinth
72,75

Minimum charged 0.5 metres.

Rear panel in Front line 73 cm

front finish RWF30197 30 182 201 242 279 354 429 489 553
in fixed front sizes RWF45197 45 192 219 273 321 397 472 539 605
without recessed handle RWF50197 50 196 229 285 340 420 503 575 644
with loose plinth RWF60197 60 209 244 302 364 463 560 633 708
124,15
For carcase height 197.4 cm old RW .. 197

72,75

41.08 1/2022
CONTINO
Tall units, carcase height 210.65 cm

CARCASE LINE 73 CARCASE LINE 86

Tall units 42. 01-03

Housing units 42. 03-04

Elevated dishwashers 42. 05

Tall shelf units 42. 05

Visible carcase sides 42. 06

210.65 cm
CONTINO
Tall units
End panels 42. 07

Blenders 42. 08
42.
Support panels with plinth 42. 09

Blenders 42. 09

Rear panels 42. 09

1/2022 42.
 CONTINO
Tall units, carcase height 210.65 cm
T: Cupboard depth cm

Function cupboards Housing units Elevated dishwashers Shelves

42.01 T: 36 / 48 / 58 cm 42.03 T: 58 cm 42.05 T: 58 cm 42.05 T: 36 / 58 cm

CH 30 210 CHG 60 210 6 CTGSU 60 40 Z HR 30 210
CH 45 210 76,4 HR 60 210
CH 50 210 73,4
HR 90 210
137,4 CH 60 210 3,5

39,75

69,5 69,5

42.01 42.03 42.05

T: 36 / 48 / 58 cm T: 58 cm CGFV 60 75
CH 90 210 63,15
CHG 60 210 6 J CGFV 60 81
CH 120 210 60,15
137,4

3,5
69,5

82,75

42.01 42.03 42.05

210.65 cm

T: 58 cm T: 58 cm T: 58 cm
CONTINO
Tall units

CH 30 210 ZIZ 67,15 CHG 60 210 11D Z CHGA 60 91

CH 45 210 ZIZ 55,15
CH 50 210 ZIZ
137,4 CH 60 210 ZIZ
3,5

69,5
42.
39,75

42.01 T: 36 / 48 / 58 cm 42.04 T: 58 cm 42.05 T: 58 cm

CH 30 210 Z2 CHGT 60 210 12 CHGA 60 96
CH 45 210 Z2 CHGTI 60 210 12
CH 50 210 Z2
137,4 CH 60 210 Z2 137,4
26,25

39,75 69,5

42.01 T: 36 / 48 / 58 cm 42.04 T: 58 cm
CH 30 210 IZ4 CHGT 60 210 12J
CH 45 210 IZ4 CHGTI 60 210 12J
CH 50 210 IZ4
137,4 CH 60 210 IZ4 124,15

69,5 82,75

42.01 T: 36 / 48 / 58 cm 42.04 T: 58 cm
CH 90 210 IZ4 CHGT 60 210 18
CHGTI 60 210 18
137,4

137,4
69,5

69,5

42.02 T: 36 / 48 / 58 cm
CH 30 210 GVZ2
CH 45 210 GVZ2
CH 50 210 GVZ2
137,4
CH 60 210 GVZ2

69,5

42.02 T: 58 cm
CH 30 210 VZZIS
CH 45 210 VZZIS

137,4

69,5

42.02 T: 58 cm
CH 30 210 VZZIS2J
CH 45 210 VZZIS2J

124,15

82,75

42.02 T: 58 cm
CH 45 210 HW
CH 50 210 HW
CH 60 210 HW
137,4

69,5

42.03
CH 30 210 N
CH 45 210 N
CH 50 210 N
CH 60 210 N
137,4
69,5

42. 1/2022
 Price group
Tall units
Carcase height 210.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit Front line 73 cm
1 door CH30210 L/R 30 521 550 620 714 771 829 891 971
3 adjustable shelves CH45210 L/R 45 550 587 670 769 833 895 963 1050
1 fixed shelf CH50210 L/R 50 560 608 683 799 869 938 1016 1107
1 door CH60210 L/R 60 581 635 721 852 934 1015 1090 1187
137,4 2 adjustable shelves

69,5

Diagram shows L

Storage unit Front line 73 cm

2 doors CH90210 90 935 998 1139 1309 1418 1524 1661 1811
3 adjustable shelves CH120210 120 1288 1362 1558 1767 1899 2031 2232 2432
1 fixed shelf
2 doors
137,4

2 adjustable shelves

With 120 cm width shelves 2.8 cm thick.

69,5

The cupboard has knock down fittings and

can be dismantled for access.

Tall storage unit Front line 73 cm

1 door CH30210ZIZ L/R 30 677 698 789 876 930 987 1044 1137
3 adjustable shelves CH45210ZIZ L/R 45 690 726 809 908 971 1034 1102 1200
1 fixed shelf CH50210ZIZ L/R 50 703 750 827 943 1012 1078 1157 1261
1 pullout CH60210ZIZ L/R 60 726 781 865 996 1076 1158 1234 1344
137,4 1 inner pullout

69,5

Diagram shows L

Tall storage unit Front line 73 cm

1 door CH30210Z2 L/R 30 692 724 797 892 954 1015 1078 1178
3 adjustable shelves CH45210Z2 L/R 45 728 767 852 954 1021 1088 1158 1263
1 fixed shelf CH50210Z2 L/R 50 742 793 870 987 1061 1132 1214 1324
2 pullouts CH60210Z2 L/R 60 765 822 908 1041 1127 1212 1290 1407
137,4
26,25

39,75

Diagram shows L

Tall storage unit Front line 73 cm

1 door CH30210IZ4 L/R 30 1042 1067 1160 1241 1299 1357 1415 1541
2 adjustable shelves CH45210IZ4 L/R 45 1047 1084 1168 1267 1331 1394 1463 1593
2 inner pullouts CH50210IZ4 L/R 50 1053 1102 1176 1293 1361 1429 1508 1643
1 fixed shelf CH60210IZ4 L/R 60 1068 1121 1210 1338 1421 1502 1579 1721
137,4 1 door
2 inner pullouts

69,5
Exchange wide angle hinge ANIGE 0
Diagram shows L through standard hinge, with spacer strip

Tall storage unit Front line 73 cm

2 doors CH90210IZ4 90 1435 1500 1640 1808 1916 2023 2202 2402
2 adjustable shelves
2 inner pullouts
1 fixed shelf
137,4

2 doors
2 inner pullouts
69,5

The cupboard has knock down fittings and

can be dismantled for access.

Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 42.01
 Price group
Tall units
Carcase height 210.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Pharmacy tall unit Front line 73 cm
1 pullout with pullout and CH30210GVZ2 30 827 857 927 1021 1077 1136 1197 1278
drawer connection CH45210GVZ2 45 869 904 987 1087 1151 1213 1280 1367
1 fixed shelf CH50210GVZ2 50 887 935 1010 1126 1194 1263 1341 1433
2 inner drawers CH60210GVZ2 60 903 957 1041 1175 1256 1336 1411 1510
137,4 1 pullout
1 fixed shelf
1 inner drawer
69,5
Max. loading 20 kg per pullout / drawer.

Storage unit Front line 73 cm

1 large capacity pullout with front panel CH30210VZZIS 30 985 1029 1106 1208 1271 1333 1397 1522
4 adjustable wire baskets with glass bottoms CH45210VZZIS 45 1073 1123 1211 1320 1390 1456 1529 1668
1 fixed shelf
1 pullout
137,4 1 inner drawer
2 loose baskets

69,5 Max. loading 15 kg per basket.

VZ-premium equipment MPVZ30P4 95

Frame inside faced in carcase style MPVZ45P4 131
4 adjustable shelves with glass sides

Storage unit Front line 86 cm

1 large capacity pullout with front panel CH30210VZZIS2J 30 1035 1078 1156 1257 1320 1382 1447 1572
3 adjustable wire baskets with glass bottoms CH45210VZZIS2J 45 1125 1175 1263 1372 1441 1508 1581 1720
1 fixed shelf
1 pullout
124,15 2 inner drawers
2 loose baskets

82,75 Max. loading 15 kg per basket.

VZ-premium equipment MPVZ30P3 80

Frame inside faced in carcase style MPVZ45P3 109
3 adjustable shelves with glass sides

Tall utility unit Front line 73 cm

1 door strapped together with CH45210HW L/R 45 552 589 674 771 835 900 969 1056
original recessed handle CH50210HW L/R 50 567 611 685 799 871 942 1021 1113
1 adjustable shelf CH60210HW L/R 60 584 638 725 862 940 1017 1092 1190
1 fixed shelf (depth 41.7 cm)
1 adjustable function shelf with railing
137,4
(depth 31 cm)
1 hose holder and 3 clamping hooks
69,5 2 adjustable shelves (depth 28 cm)

Diagram shows L

Package vertical shelf HWV 55

1 centre panel next to hinged side,
on two-door cupboards left
Shelf height 160 cm
Shelf width 18.4 cm
Installed in tall utility unit

Available from cupboard height 190 cm and from

cupboard width 50 cm.
Combination with package waste depot possible.

Package waste depot HWWD 111

1 frame with lid for waste bags
at side opposite hinged side,
on two-door cupboards right
1 cloth bag

Combination with package vertical shelf from cupboard

width 50 cm possible.

42.02 1/2022
 Price group
Tall units
Carcase height 210.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Package drinks crates storage HW60GA2 77
2 racks for drinks crates made of steel tubing
for fitting in crockery- or utility unit
on site

When used in the utility unit, function shelf, hose rack

and clamping hook are dispensed with in favour of an
adjustable shelf.

Niche door Front line 73 cm

1 door strapped together with original CH30210N L/R 30 362 402 424 503 567 628 709 774
recessed handle and attached plinth CH45210N L/R 45 386 417 450 525 605 682 756 824
no rear panel CH50210N L/R 50 391 431 461 558 643 727 811 884
no floor CH60210N L/R 60 404 445 484 584 676 767 874 952
137,4

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
69,5

Diagram shows L

Divided niche door CANNT40 52

Divided over front height 39.75 cm
with recessed handle

Price group
Housing units
Carcase height 210.65 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit Front line 73 cm
1 door with „sesame-closure“ CHG602106 L/R 60 642 678 731 808 936 1059 1204 1285
76,4 2 adjustable shelves
73,4 1 appliance niche 57-60 cm Modular parts list
1 blender CHGM60210
1 recessed handle 3.5 cm CMO6066TS
3,5
1 door CMGN6068
2 adjustable shelves CMU6077BT

69,5 „Sesame-closure“ see page 10.10.

For ovens.
Diagram shows L

Housing unit Front line 86 cm

1 door with „sesame-closure“ CHG602106J L/R 60 636 673 729 800 930 1056 1185 1267
63,15
1 adjustable shelf
60,15 1 appliance niche 57-60 cm Modular parts list
1 blender CHGM60210
3,5
1 recessed handle 3.5 cm CMO6053TS
1 door CMGN6068
2 adjustable shelves CMU6090BT
82,75
„Sesame-closure“ see page 10.10.
Diagram shows L For ovens.

Housing unit CHG6021011DZ L/R 60 656 689 742 802 915 1025 1148 1227
67,15 1 door with „sesame-closure“
55,15 1 adjustable shelf Modular parts list
1 appliance double niche 96-108 cm CHGM60210
1 blender CMO6053TS
1 recessed handle 3.5 cm CMGN60110D
3,5 1 pullout CMU6047BZ

39,75 „Sesame-closure“ see page 10.10.

For double oven or for microwave
Diagram shows L (built-in trim kit will be necessary)
and oven or for fridge.

1/2022 42.03
 Price group
Housing units
Carcase height 210.65 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit Front line 73 cm
1 door for box shelf and CHGT6021012 L/R 60 619 652 731 816 953 1088 1191 1273
appliance niche 122 cm
1 recessed handle 3.5 cm with integral ventilation
1 door Front line 73 cm
2 adjustable shelves CHGTI6021012 L/R 60 619 652 731 816 953 1088 1191 1273
137,4
For integrated fridge or freezer. Modular parts list
CHGM60210
69,5 CMGT60141
CMU6070T
Diagram shows L

Housing unit Front line 86 cm

1 door for appliance niche 103 cm CHGT6021012J L/R 60 630 664 733 820 951 1081 1188 1271
1 recessed handle 3.5 cm
1 door with integral ventilation
2 adjustable shelves Front line 86 cm
124,15 CHGTI6021012J L/R 60 630 664 733 820 951 1081 1188 1271
For integrated fridge or freezer.
Modular parts list
82,75 CHGM60210
CMGT60128
Diagram shows L CMU6083T

Housing unit Front line 73 cm

1 door strapped together for CHGT6021018 L/R 60 567 622 713 857 936 1013 1111 1185
appliance niche 178 cm
or with integral ventilation
2 doors for appliance niche 178 cm Front line 73 cm
1 support hinge SSCH CHGTI6021018 L/R 60 567 622 713 857 936 1013 1111 1185
137,4 when the front projects more than 26 cm
from the appliance Modular parts list
CHGM60210
69,5 Special handle solution see page 10.10. CMGT60210
For integrated fridge and freezer.
Diagram shows L Not available in IOS-C, IOS-M-C

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

42.04 1/2022
 Price group
Elevated dishwashers
Carcase height 210.65 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Dishwasher support CTGSU6040Z 60 370 383 386 419 459 499 533 581
Carcase height 30 cm
1 pullout with 39.75 cm high front panel
and chamfered edge at the bottom
39,75 for opening
1 drip tray

No recessed handle / horizontal joint 0.25 cm.

IOS-C and IOS-M-C only possible with 0.8 cm joint!

Dishwasher-front Module height 75 cm

for fully integrated dishwasher, Appliance height 82 cm
height 82 or 87 cm. CGFV6075 60 125 130 166 203 240 280 338 367

Please state appliance model on order! Module height 80 cm

Side panel or fixing essential e.g. Appliance height 87 cm
panels or cupboards. CGFV6081 60 125 130 166 203 240 280 338 367

Dishwasher-Top cupboard CHGA6091 L/R 60 384 397 423 454 511 568 633 690
1 door
2 adjustable shelves
1 recessed handle 3.5 cm

Side panel or fixing essential e.g. panels

or tall units.

Dishwasher-Top cupboard CHGA6096 L/R 60 409 424 451 482 542 603 675 736
1 door
3 adjustable shelves
1 recessed handle 3.5 cm

Side panel or fixing essential e.g. panels

or tall units.

Surface style
Tall shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 210.65 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit Shelf unit depth 36.2 cm
6 adjustable shelves HR3021036 10-30 650 680 744 934 - 1035 1188 989
HR6021036 30-60 696 736 813 1007 - 1125 1290 1068
Widths in mm grid variably available. HR9021036 60-90 742 792 882 1080 - 1215 1392 1147
Please state desired width.
Shelf unit depth 58.2 cm
HR30210 10-30 699 736 804 1011 - 1122 1288 1068
HR60210 30-60 749 792 875 1087 - 1213 1393 1154
HR90210 60-90 799 848 946 1163 - 1304 1498 1239

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.

1/2022 42.05
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 210.65 cm
Side depth 34 cm FS21034 L/R 34 0 0 123 179 242 300 159
Side depth 46 cm FS21046 L/R 46 0 0 146 211 300 377 198
Side depth 56 cm FS21056 L/R 56 0 0 146 211 300 377 198
Side depth 61 cm FS21061 L/R 61 0 0 166 243 346 434 229
Side depth 66 cm FS21066 L/R 66 0 0 166 243 346 434 229
Side depth 76 cm FS21076 L/R 76 0 0 178 257 367 459 242
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 210.65 cm
Side depth up to 34 cm FSUEL21034 L/R 34 92 92 215 271 334 392 251
Side depth up to 46 cm FSUEL21046 L/R 46 92 92 238 303 392 469 290
Side depth up to 58 cm FSUEL21058 L/R 58 92 92 238 303 392 469 290
Side depth up to 63 cm FSUEL21063 L/R 63 92 92 258 335 438 526 321
Side depth up to 68 cm FSUEL21068 L/R 68 146 146 312 389 492 580 375
Side depth up to 76 cm FSUEL21076 L/R 76 146 146 324 403 513 605 388
Diagram shows R

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

42.06 1/2022
 Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit end panel Front line 73 cm
Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) CHW521058 L/R 5 489 512 575 643 690 735 779 833
Width 5 cm
Divided over front height 69.5 cm
with recessed handle
137,4
Please state the relevant L/R.
The end panel width is always 5 cm.
69,5

Diagram shows L

Tall unit end panel Front line 73 cm

Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) CHW521058Z2 L/R 5 567 588 652 721 767 812 856 916
Width 5 cm
Divided over front height 39.75 and 69.5 cm
with recessed handle
137,4
26,25 Please state the relevant L/R.
The end panel width is always 5 cm.
39,75

Diagram shows L

Tall unit panel Basic type

with side shelf unit area Front line 73 cm
1 fixed front at the front Depth up to 62.5 cm
with side frame in front colour CHW1521058R L/R 15 627 650 693 779 851 922 1001 1092
2 shelves
137,4 1 recessed handle at the front and side, Extra charge interior
above front height 69.5 cm MPK/KH/KG 0
1 fixed front at the front MPFF/PF/VM 212
69,5 with side frame in front colour MPFS/ME 309
Diagram shows R
1 shelf MPFG 498
Always state interior style, MPH 417
possible colours see chapter 11!
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
VALAIS-C
Without plinth!
The plinth end finishes at the last cupboard.

1/2022 42.07
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 210.65 cm
Front finish CHP20210 L/R 20 98 109 112 121 136 156 161 175

Front finish blenders are manufactured with a maximum

20 cm width.

210,4

Diagram shows L

Tall unit corner blender 90° Carcase height 210.65 cm

Front finish CHPE210 10 184 209 219 237 272 302 311 340
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
210,4 from l to r on order.

4
4

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 210.65 cm

Front finish CHPEW210 10 199 222 232 248 283 313 324 352
Freely selectable angle up to max. 270°
Not available in IOS-C, IOS-M-C
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width

Flush with front.

210,4
Please state rear length (inside measurement)
from l to r on order.
3
3

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided blender .
Divided over front height 39.75 cm CANBT40 39
with recessed handle

Divided over front height 69.5 cm CANBT73 39

with recessed handle

Divided over front height 82.75 cm CANBT86 39

with recessed handle

Suitable for blenders.

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

42.08 1/2022
 Surface style
Support panels with plinth Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MC H
Support panel with plinth CHWSP21056 L/R 56 196 196 394 519 573 626 715 557
for blender CHWSP21066 L/R 66 215 215 454 597 655 712 811 638
Thickness 1.6 cm
prepared for connection to
tall unit blenders with
recessed handle milling

Only as accessory type for blenders CHP ..,

not available loose!
For use next to appliances or an open niche.
Visible side facing the appliance or the open niche,
Diagram shows R
please state left/right version.

Support panel with plinth up to

Thickness 1.6 cm HWS21058 L/R 63 173 173 372 498 553 607 696 533
both sides finished HWS21068 L/R 70 197 197 422 565 630 695 795 611

Please state required depth.

Please state whether placed L/R and plinth height.
Fit plinth return (7 mm) on site.
Plinth height 1.5 cm larger for floor adjustment.

Diagram shows R

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 210.65 cm
flush with carcase HSB20210 20 53 58 65 86 93 99 117 81

Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 73 cm
in variable sizes RWF210 424 482 570 722 894 1066 1202 1341
Height up to 210.4 cm
137,4 Max. width 120 cm Not available in IOS-C, IOS-M-C
without recessed handle
with loose plinth
72,75
Minimum charged 0.5 metres.

Rear panel in Front line 73 cm

front finish RWF30210 30 220 238 276 333 420 510 569 643
in fixed front sizes RWF45210 45 232 259 307 379 467 556 621 698
without recessed handle RWF50210 50 235 271 317 401 498 592 668 746
with loose plinth RWF60210 60 246 291 346 434 547 661 734 818
137,4 For carcase height 210.65 cm old RW .. 210

72,75

1/2022 42.09
1/2022
CONTINO
Tall units, carcase height 223.9 cm

CARCASE LINE 73 CARCASE LINE 86

Tall units 43. 01-03

Housing units 43. 03-04

Elevated dishwashers 43. 04

Tall shelf units 43. 05

Visible carcase sides 43. 05

End panels 43. 06

Blenders 43. 07

Support panels with plinth 43. 08

Blenders 43. 08

Rear panels 43. 08

CONTINO

223.9 cm
Tall units
43.

1/2022 43.
 CONTINO
Tall units, carcase height 223.9 cm
T: Cupboard depth cm

Function cupboards Housing units Elevated dishwashers Shelves

43.01 T: 36 / 48 / 58 cm 43.03 T: 58 cm 43.04 T: 58 cm 43.05 T: 36 / 58 cm

CH 30 224 CHG 60 224 6 CTGSU 60 40 Z HR 30 224
CH 45 224 89,65 HR 60 224
CH 50 224 86,65
HR 90 224
150,65
CH 60 224 3,5
39,75

69,5 69,5

43.01 43.03 43.04

T: 36 / 48 / 58 cm T: 58 cm CGFV 60 75
CH 90 224 CHG 60 224 6 J CGFV 60 81
CH 120 224 76,4
73,4
150,65

3,5
69,5

82,75

43.01 T: 58 cm 43.03 T: 58 cm 43.04 T: 58 cm

CH 30 224 ZIZ 64,65 CHG 60 224 9 CHGA 60 104
CH 45 224 ZIZ 51,65 CHGA 60 109
CH 50 224 ZIZ
150,65
CH 60 224 ZIZ 3,5

69,5 69,5

43.01 T: 36 / 48 / 58 cm 43.04 T: 58 cm
CH 30 224 Z2 51,4 CHG 60 224 9 J
CH 45 224 Z2 38,4
CH 50 224 Z2
150,65
CH 60 224 Z2 3,5

26,25
CONTINO

223.9 cm
Tall units

39,75 82,75

43.01 T: 36 / 48 / 58 cm 43.04 T: 58 cm
CH 30 224 IZ4 26,25
CHGT 60 224 18 K
CH 45 224 IZ4 CHGTI 60 224 18 K
CH 50 224 IZ4
43. 150,65
CH 60 224 IZ4
124,15

69,5 69,5

43.01 T: 36 / 48 / 58 cm
CH 90 224 IZ4
150,65
69,5

43.02 T: 36 / 48 / 58 cm
CH 30 224 GVZ2
CH 45 224 GVZ2
CH 50 224 GVZ2
150,65
CH 60 224 GVZ2

69,5

43.02 T: 58 cm
CH 30 224 VZZIS
CH 45 224 VZZIS

150,65

69,5

43.02 T: 58 cm
CH 30 224 VZZIS2J
CH 45 224 VZZIS2J

137,4

82,75

43.02 T: 58 cm
CH 45 224 HW
CH 50 224 HW
CH 60 224 HW
150,65

69,5

43.03
CH 30 224 N
CH 45 224 N
CH 50 224 N
CH 60 224 N
150,65
69,5

43. 1/2022
 Price group
Tall units
Carcase height 223.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit Front line 73 cm
1 door CH30224 L/R 30 618 655 738 849 917 986 1059 1155
4 adjustable shelves CH45224 L/R 45 656 698 797 915 992 1066 1146 1249
1 fixed shelf CH50224 L/R 50 667 724 814 952 1033 1115 1208 1317
1 door CH60224 L/R 60 691 756 856 1014 1112 1207 1297 1413
2 adjustable shelves
150,65

69,5

Diagram shows L

Storage unit Front line 73 cm

2 doors CH90224 90 1113 1189 1356 1559 1686 1813 1977 2155
4 adjustable shelves CH120224 120 1533 1622 1855 2103 2260 2417 2656 2898
1 fixed shelf
2 doors
150,65

2 adjustable shelves

With 120 cm width shelves 2.8 cm thick.

The cupboard has knock down fittings and
69,5

can be dismantled for access.

Tall storage unit Front line 73 cm

1 door CH30224ZIZ L/R 30 805 832 939 1042 1107 1177 1244 1355
4 adjustable shelves CH45224ZIZ L/R 45 821 862 962 1081 1155 1229 1311 1428
1 fixed shelf CH50224ZIZ L/R 50 837 893 983 1121 1203 1284 1378 1502
1 pullout CH60224ZIZ L/R 60 862 929 1029 1186 1283 1379 1469 1600
1 inner pullout
150,65

69,5

Diagram shows L

Tall storage unit Front line 73 cm

1 door CH30224Z2 L/R 30 824 859 949 1061 1133 1207 1284 1400
4 adjustable shelves CH45224Z2 L/R 45 866 912 1014 1134 1214 1294 1379 1503
1 fixed shelf CH50224Z2 L/R 50 884 943 1034 1176 1261 1348 1444 1574
2 pullouts CH60224Z2 L/R 60 910 976 1081 1240 1341 1442 1534 1674

150,65
26,25

39,75

Diagram shows L

Tall storage unit Front line 73 cm

1 door CH30224IZ4 L/R 30 1241 1271 1381 1477 1546 1615 1683 1833
3 adjustable shelves CH45224IZ4 L/R 45 1247 1290 1391 1507 1583 1658 1739 1895
2 inner pullouts CH50224IZ4 L/R 50 1253 1309 1399 1538 1620 1702 1795 1957
1 fixed shelf CH60224IZ4 L/R 60 1271 1334 1439 1592 1690 1788 1878 2046
1 door
150,65
2 inner pullouts

69,5 Exchange wide angle hinge ANIGE 0

through standard hinge, with spacer strip
Diagram shows L

Tall storage unit Front line 73 cm

2 doors CH90224IZ4 90 1706 1785 1951 2152 2280 2407 2623 2859
3 adjustable shelves
2 inner pullouts
1 fixed shelf
150,65

2 doors
2 inner pullouts

The cupboard has knock down fittings and

69,5

can be dismantled for access.

Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 43.01
 Price group
Tall units
Carcase height 223.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Pharmacy tall unit Front line 73 cm
1 pullout with pullout and CH30224GVZ2 30 984 1021 1104 1215 1283 1352 1425 1521
drawer connection CH45224GVZ2 45 1034 1076 1176 1294 1370 1444 1524 1628
1 fixed shelf CH50224GVZ2 50 1056 1113 1203 1341 1422 1503 1596 1706
2 inner drawers CH60224GVZ2 60 1074 1139 1240 1398 1495 1590 1680 1797
1 pullout
150,65 1 fixed shelf
1 inner drawer
69,5
Max. loading 20 kg per pullout / drawer.

Storage unit Front line 73 cm

1 large capacity pullout with front panel CH30224VZZIS 30 1172 1223 1316 1438 1512 1586 1663 1813
5 adjustable wire baskets with glass bottoms CH45224VZZIS 45 1277 1335 1441 1571 1652 1734 1820 1985
1 fixed shelf
1 pullout
1 inner drawer
150,65 2 loose baskets

Max. loading 15 kg per basket.

69,5

VZ-premium equipment MPVZ30P5 110

Frame inside faced in carcase style MPVZ45P5 153
5 adjustable shelves with glass sides

Storage unit Front line 86 cm

1 large capacity pullout with front panel CH30224VZZIS2J 30 1221 1273 1366 1488 1561 1636 1712 1862
4 adjustable wire baskets with glass bottoms CH45224VZZIS2J 45 1329 1387 1493 1622 1704 1786 1872 2037
1 fixed shelf
1 pullout
137,4 2 inner drawers
2 loose baskets

Max. loading 15 kg per basket.

82,75

VZ-premium equipment MPVZ30P4 95

Frame inside faced in carcase style MPVZ45P4 131
4 adjustable shelves with glass sides

Tall utility unit Front line 73 cm

1 door strapped together with CH45224HW L/R 45 658 701 802 918 995 1071 1153 1257
original recessed handle CH50224HW L/R 50 674 728 815 951 1036 1122 1215 1326
2 adjustable shelves CH60224HW L/R 60 695 758 862 1027 1119 1212 1300 1417
1 fixed shelf (depth 41.7 cm)
1 adjustable function shelf with railing
150,65 (depth 31 cm)
1 hose holder and 3 clamping hooks
2 adjustable shelves (depth 28 cm)
69,5

Diagram shows L

Package vertical shelf HWV 55

1 centre panel next to hinged side,
on two-door cupboards left
Shelf height 160 cm
Shelf width 18.4 cm
Installed in tall utility unit

Available from cupboard height 190 cm and from

cupboard width 50 cm.
Combination with package waste depot possible.

Package waste depot HWWD 111

1 frame with lid for waste bags
at side opposite hinged side,
on two-door cupboards right
1 cloth bag

Combination with package vertical shelf from cupboard

width 50 cm possible.

43.02 1/2022
 Price group
Tall units
Carcase height 223.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Package drinks crates storage HW60GA2 77
2 racks for drinks crates made of steel tubing
for fitting in crockery- or utility unit
on site

When used in the utility unit, function shelf, hose rack

and clamping hook are dispensed with in favour of an
adjustable shelf.

Niche door Front line 73 cm

1 door strapped together with original CH30224N L/R 30 432 479 506 598 673 748 845 921
recessed handle and attached plinth CH45224N L/R 45 459 496 535 626 720 813 900 980
no rear panel CH50224N L/R 50 464 513 549 665 765 865 965 1051
no floor CH60224N L/R 60 481 528 578 696 805 913 1038 1131
150,65

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
69,5

Diagram shows L

Divided niche door CANNT40 52

Divided over front height 39.75 cm
with recessed handle

Price group
Housing units
Carcase height 223.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit Front line 73 cm
1 door with „sesame-closure“ CHG602246 L/R 60 660 695 753 830 959 1085 1232 1314
89,65 2 adjustable shelves
86,65 1 appliance niche 57-60 cm Modular parts list
1 blender CHGM60224
1 recessed handle 3.5 cm CMO6080TS
3,5
1 door CMGN6068
2 adjustable shelves CMU6077BT

69,5 „Sesame-closure“ see page 10.10.

For ovens.
Diagram shows L

Housing unit Front line 86 cm

1 door with „sesame-closure“ CHG602246J L/R 60 674 708 766 840 974 1102 1253 1339
76,4 2 adjustable shelves
73,4 1 appliance niche 57-60 cm Modular parts list
1 blender CHGM60224
3,5 1 recessed handle 3.5 cm CMO6066TS
1 door CMGN6068
2 adjustable shelves CMU6090BT
82,75
„Sesame-closure“ see page 10.10.
Diagram shows L For ovens.

Housing unit Front line 73 cm

64,65
1 door with „sesame-closure“ CHG602249 L/R 60 618 657 708 782 906 1027 1150 1227
1 adjustable shelf
51,65
1 appliance niche 82-95 cm Modular parts list
1 blender CHGM60224
1 recessed handle 3.5 cm CMO6053TS
3,5
1 door CMGN6097
2 adjustable shelves CMU6077BT

69,5 „Sesame-closure“ see page 10.10.

For double oven or for microwave
Diagram shows L
(built-in trim kit will be necessary)
and oven or for fridge.

1/2022 43.03
 Price group
Housing units
Carcase height 223.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit Front line 86 cm
51,4 1 door with „sesame-closure“ CHG602249J L/R 60 629 661 716 781 903 1020 1172 1249
38,4 1 adjustable shelf
1 appliance niche 82-95 cm Modular parts list
1 blender CHGM60224
3,5 1 recessed handle 3.5 cm CMO6040TS
1 door CMGN6097
2 adjustable shelves CMU6090BT

82,75
„Sesame-closure“ see page 10.10.
Diagram shows L For double oven or for microwave
(built-in trim kit will be necessary)
and oven or for fridge.

Housing unit Front line 73 cm

26,25
1 top hinged door with „sesame-closure“ CHGT6022418K L/R 60 625 681 777 902 1007 1111 1251 1338
1 door strapped together for
appliance niche 178 cm Front line 73 cm
or with integral ventilation
2 doors for appliance niche 178 cm CHGTI6022418K L/R 60 625 681 777 902 1007 1111 1251 1338
124,15 1 support hinge SSCH
when the front projects more than 26 cm Modular parts list
from the appliance CHGM60224
69,5 CMO6027KS
Special top hinged door and special handle solution CMGT60197
Diagram shows L
see page 10.10.
Not available in IOS-C, IOS-M-C
For integrated fridge and freezer.

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

Price group
Elevated dishwashers
Carcase height 223.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Dishwasher support CTGSU6040Z 60 370 383 386 419 459 499 533 581
Carcase height 30 cm
1 pullout with 39.75 cm high front panel
and chamfered edge at the bottom
39,75 for opening
1 drip tray

No recessed handle / horizontal joint 0.25 cm.

IOS-C and IOS-M-C only possible with 0.8 cm joint!

Dishwasher-front Module height 75 cm

for fully integrated dishwasher, Appliance height 82 cm
height 82 or 87 cm. CGFV6075 60 125 130 166 203 240 280 338 367

Please state appliance model on order! Module height 80 cm

Side panel or fixing essential e.g. Appliance height 87 cm
panels or cupboards. CGFV6081 60 125 130 166 203 240 280 338 367

Dishwasher-Top cupboard CHGA60104 L/R 60 409 424 451 482 542 603 675 736
1 door CHGA60109 L/R 60 409 424 451 482 542 603 675 736
3 adjustable shelves
1 recessed handle 3.5 cm

Side panel or fixing essential e.g. panels

or tall units.

43.04 1/2022
 Surface style
Tall shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 223.9 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit Shelf unit depth 36.2 cm
7 adjustable shelves HR3022436 10-30 770 806 883 1109 - 1229 1411 1174
HR6022436 30-60 825 873 965 1196 - 1336 1533 1269
Widths in mm grid variably available. HR9022436 60-90 880 940 1047 1283 - 1443 1655 1364
Please state desired width.
Shelf unit depth 58.2 cm
HR30224 10-30 829 873 954 1200 - 1332 1530 1269
HR60224 30-60 889 940 1039 1291 - 1441 1655 1369
HR90224 60-90 949 1007 1124 1382 - 1550 1780 1469

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 223.9 cm
Side depth 34 cm FS22434 L/R 34 0 0 146 213 287 357 188
Side depth 46 cm FS22446 L/R 46 0 0 173 251 357 448 236
Side depth 56 cm FS22456 L/R 56 0 0 173 251 357 448 236
Side depth 61 cm FS22461 L/R 61 0 0 197 289 411 516 272
Side depth 66 cm FS22466 L/R 66 0 0 197 289 411 516 272
Side depth 76 cm FS22476 L/R 76 0 0 211 305 436 546 287
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 223.9 cm
Side depth up to 34 cm FSUEL22434 L/R 34 92 92 238 305 379 449 280
Side depth up to 46 cm FSUEL22446 L/R 46 92 92 265 343 449 540 328
Side depth up to 58 cm FSUEL22458 L/R 58 92 92 265 343 449 540 328
Side depth up to 63 cm FSUEL22463 L/R 63 92 92 289 381 503 608 364
Side depth up to 68 cm FSUEL22468 L/R 68 146 146 343 435 557 662 418
Side depth up to 76 cm FSUEL22476 L/R 76 146 146 357 451 582 692 433
Diagram shows R

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

1/2022 43.05
 Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit end panel Front line 73 cm
Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) CHW522458 L/R 5 574 602 678 759 814 866 921 986
Width 5 cm
Divided over front height 69.5 cm
with recessed handle
150,65
Please state the relevant L/R.
The end panel width is always 5 cm.
69,5

Diagram shows L

Tall unit end panel Front line 73 cm

Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) CHW522458Z2 L/R 5 653 681 759 839 892 947 1001 1070
Width 5 cm
Divided over front height 39.75 and 69.5 cm
with recessed handle
150,65
Please state the relevant L/R.
26,25
The end panel width is always 5 cm.
39,75

Diagram shows L

Tall unit panel Basic type

with side shelf unit area Front line 73 cm
1 fixed front at the front Depth up to 62.5 cm
with side frame in front colour CHW1522458R L/R 15 746 774 825 926 1013 1099 1192 1300
3 shelves
1 recessed handle at the front and side, Extra charge interior
150,65
above front height 69.5 cm MPK/KH/KG 0
1 fixed front at the front MPFF/PF/VM 212
with side frame in front colour MPFS/ME 309
69,5
1 shelf MPFG 498
Diagram shows R Always state interior style, MPH 417
possible colours see chapter 11!
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
VALAIS-C
Without plinth!
The plinth end finishes at the last cupboard.

43.06 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 223.9 cm
Front finish CHP20224 L/R 20 115 127 131 143 164 182 189 208

Front finish blenders are manufactured with a maximum

20 cm width.

223,65

Diagram shows L

Tall unit corner blender 90° Carcase height 223.9 cm

Front finish CHPE224 10 221 246 259 283 323 360 370 403
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.
223,65

4
4

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 223.9 cm

Front finish CHPEW224 10 236 263 277 297 336 374 385 418
Freely selectable angle up to max. 270°
Not available in IOS-C, IOS-M-C
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width

Flush with front.

223,65 Please state rear length (inside measurement)
from l to r on order.
3
3

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided blender .
Divided over front height 39.75 cm CANBT40 39
with recessed handle

Divided over front height 69.5 cm CANBT73 39

with recessed handle

Divided over front height 82.75 cm CANBT86 39

with recessed handle

Suitable for blenders.

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

1/2022 43.07
 Surface style
Support panels with plinth Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MC H
Support panel with plinth CHWSP22456 L/R 56 233 233 469 618 682 745 851 663
for blender CHWSP22466 L/R 66 256 256 540 711 780 848 965 760
Thickness 1.6 cm
prepared for connection to
tall unit blenders with
recessed handle milling

Only as accessory type for blenders CHP ..,

not available loose!
For use next to appliances or an open niche.
Visible side facing the appliance or the open niche,
Diagram shows R
please state left/right version.

Support panel with plinth up to

Thickness 1.6 cm HWS22458 L/R 63 206 206 443 593 658 723 829 633
both sides finished HWS22468 L/R 70 234 234 502 673 750 827 946 728

Please state required depth.

Please state whether placed L/R and plinth height.
Fit plinth return (7 mm) on site.
Plinth height 1.5 cm larger for floor adjustment.

Diagram shows R

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 223.9 cm
flush with carcase HSB20224 20 62 68 77 102 110 117 139 96

Price group
Rear panels
Front finish
Neutral

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 73 cm
in variable sizes RWF224 505 574 678 857 1064 1269 1430 1596
Height up to 223.65 cm
150,65 Max. width 120 cm Not available in IOS-C, IOS-M-C
without recessed handle
with loose plinth
72,75
Minimum charged 0.5 metres.

Rear panel in Front line 73 cm

front finish RWF30224 30 260 284 326 396 501 606 675 765
in fixed front sizes RWF45224 45 277 306 367 452 556 662 739 830
without recessed handle RWF50224 50 280 320 377 476 591 704 795 887
with loose plinth RWF60224 60 294 346 410 517 651 784 874 973
150,65 For carcase height 223.9 cm old RW .. 224

72,75

43.08 1/2022
CONTINO
Modular housing units / Top cupboards

CARCASE LINE 73 CARCASE LINE 86

Modular housing units - Planning tips 34. 01

Basic units for modular housing units - Carcase heights 154.15 / 197.4 / 210.65 / 223.9 cm, carcase depth 56 cm 44. 02

Modules Below - open below appliance niche 44. 02-03

Modules Below - below appliance niche with door 44. 04-05

Modules Below - Appliance niche with door, open below appliance niche 44. 06

Modules Appliance niche (open) - below touch opening 44. 06-07

Modules Appliance niche (open) - with recessed handle and blender 44. 07

Modules Appliance niche with door - only as Module below 44. 08

Modules Appliance niche with door - not as Module below 44. 09

Modules Above for recessed handle - Modules heights 27, 36, 40, 50, 53, 63, 66, 80 and 93 cm 44. 09-10

Modules Above with touch opening - Modules heights 27, 40, 53, 66, 80 and 93 cm 44. 10-11

Tall unit top cupboards - Carcase height 26.5 / 39.75 / 53.0 cm, carcase depth 56 cm 44. 11

Visible carcase sides - Modular housing units 44. 12

Modular tall units /

Blenders - Modular housing units 44. 13-14

Top cupboards
Blenders - Modular housing units 44. 14

44.

1/2022 44.
 CONTINO
Modular housing units / Top cupboards
T: Cupboard depth cm
H: Cupboard height cm

Basic units Modules Below Modules Appliance niche Modules Above

44.02 44.02-42.06 44.06 44.09-44.11

T: 58 cm CMU 60 ... CMGN 60 ... CMO 60 ...
H: 154,1 cm
CHGM 60 154
CHGM 76 154
H: 197,4 cm
CHGM 60 197 82,75
CHGM 76 197
H: 210,6 cm
CHGM 60 210 44.07
CHGM 76 210 CMGN 60 ... B
H: 223,9 cm
CHGM 60 224
CHGM 76 224
Modular tall units /
Top cupboards

44.

Top cupboards
44.11 T: 36 / 48 / 58 cm 44.11 T: 36 / 48 / 58 cm 44.11 T: 36 / 48 / 58 cm
CHAK 30 27 S CHA 30 40 S CHA 30 53 S
CHAK 45 27 S CHA 45 40 S CHA 45 53 S
CHAK 50 27 S CHA 50 40 S CHA 50 53 S
CHAK 60 27 S CHA 60 40 S CHA 60 53 S
CHAK 90 27 S

44.11 T: 36 / 48 / 58 cm 44.11 T: 36 / 48 / 58 cm
CHA 90 40 S CHA 90 53 S

44.11 T: 36 / 48 / 58 cm
CHAK 30 40 S
CHAK 45 40 S
CHAK 50 40 S
CHAK 60 40 S
CHAK 90 40 S

44. 1/2022
Modular housing units - Planning tips

CARCASE LINE 73 CARCASE LINE 86

1. Choice of basic cupboard The basic cupboard is the building block in kitchen planning and
is described by planning measurements (height, width and depth).
• All tall unit heights are available
• Modular housing units are available with 60 cm and 76 cm width

Relevant to the use, the basic cupboard will be stocked with modules:

Examples:

Modular housing units

CHGM 60 XXX (XXX = cupboard height)

Appliance position below / middle / above

Module above CMO 60 53 ... S CMO 60 53 ... S

CMO...
CMO 60 53 ... CMO 60 53 ... Adjustment through
door/lift-up door

CMGT 60 91 CMGN 60 84 D
Module niche
e.g. 210 cm

e.g. 210 cm

CMGN / CMGT...
CMGT 60 91 CMGN 60 75 B

Adjustment through
blender/drawer

Grip han
dle 69,5
cm

Module below CMU 60 70 ... CMU 60 77 B...

CMU... Grip h
andle
39,75
CMU 60 70 ... CMU 60 77 B... cm

Summary of the modules = height of basic cupboard

(e.g. 210 cm). Permitted deviation +/- 6 cm
because of the rounded module-planning dimensions.

2. Selecting the modules • Determining height and furnishing of the lower module CMU… or The difference between module-planning dimension CMGN... and
CMGT… Considerations are the ergonomically desired position of the respectively necessary appliance niche, is adjusted with front
the appliance (module height) and the line layout of the adjoining blenders for frame programmes. All other programmes in 2-dimen-
cupboards (front divisions). sional design have a dimensionally adjusted upper front (CMO…)
• Appliance niche. For the respective appliance type and its neces- with front coloured thick-edge end adjacent the appliance.
sary niche, the appropriate module with door CMGT… or without When using 2 appliances, add the thickness of 2 cm for a middle
door CMGN… is selected. shelf according to the construction of the overall niche height. With
• Choice of the upper module CMO…. The upper module is de- appliances that can be stacked or when using bearing rails GUWIN
termined from the rest by the dimensions of the various module the 2 cm addition is not necessary.
heights.
The following applies for planning programmes: based on the cal-
culated remainder of the measurement, the next smaller module
CMO ... must be selected!

All basic cupboards and module variants can be found on the fol-
lowing pages. For further examples of modular configurations, see
standard tall units, chapter 40. to 43.
1/2022 44.01
 Price group
Basic units for modular housing units
Carcase heights 154.15 / 197.4 / 210.65 / 223.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Basic unit Carcase height 154.15 cm
for furnishing with modules CHGM60154 60 239 239 239 239 239 239 239 239
CMU 60 ..., CMGT 60 ..., CMGN 60 ... CHGM76154 76 395 395 395 395 395 395 395 395
and CMO 60 ...
Carcase height 197.4 cm
Please use the 76 cm wide basic unit for the 60 cm wide CHGM60197 60 268 268 268 268 268 268 268 268
modules. These will be adapted to the 76 cm width at the CHGM76197 76 424 424 424 424 424 424 424 424
factory without extra charge.
Width alterations of between 60 cm up to 76 cm are Carcase height 210.65 cm
charged with the price CHGM 76 .. . CHGM60210 60 277 277 277 277 277 277 277 277
CHGM76210 76 433 433 433 433 433 433 433 433

Carcase height 223.9 cm

CHGM60224 60 284 284 284 284 284 284 284 284
CHGM76224 76 440 440 440 440 440 440 440 440

Price group
Modules Below
open below appliance niche

Neutral
Modules heights 47, 57 and 77 cm for front line 73 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Module Below 47 CMU6047BZ 60 240 256 282 304 347 390 450 490
module height 47 cm
40 1 blender 3.5 cm
1 recessed handle 3.5 cm
1 pullout

Module Below 57 CMU6057SZ 60 321 352 375 417 457 496 594 646
13 module height 57 cm
40 1 drawer
1 recessed handle 3.5 cm
1 pullout

Module Below 77 CMU6077BT L/R 60 195 217 241 277 331 385 445 483
module height 77 cm
1 blender 3.5 cm
70
1 recessed handle 3.5 cm
1 door
Diagram shows L 2 adjustable shelves

Module Below 77 CMU6077BZ 60 268 284 307 342 394 445 505 549
module height 77 cm
1 blender 3.5 cm
70
1 recessed handle 3.5 cm
1 pullout

Module Below 77 CMU6077BZIS 60 399 415 439 472 524 577 638 695
module height 77 cm
1 blender 3.5 cm
70
1 recessed handle 3.5 cm
1 pullout
1 inner drawer

Module Below 77 CMU6077BZ2 60 431 465 499 550 601 652 787 857
module height 77 cm
26
1 blender 3.5 cm
40 2 recessed handles, 3.5 cm each
2 pullouts

Module Below 77 CMU6077BS2Z 60 533 573 614 673 796 918 1005 1096
13 module height 77 cm
13 1 blender 3.5 cm
40 2 recessed handles, 3.5 cm each
2 drawers
1 pullout

44.02 1/2022
 Price group
Modules Below
open below appliance niche

Neutral
Modules heights 47, 57 and 90 cm for front line 86 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Module Below 47 CMU6047BZ 60 240 256 282 304 347 390 450 490
module height 47 cm
40 1 blender 3.5 cm
1 recessed handle 3.5 cm
1 pullout

Module Below 57 CMU6057SZ 60 321 352 375 417 457 496 594 646
13 module height 57 cm
40 1 drawer
1 recessed handle 3.5 cm
1 pullout

Module Below 90 CMU6090BT L/R 60 220 240 269 302 362 421 487 530
module height 90 cm
1 blender 3.5 cm
1 recessed handle 3.5 cm
82,75

1 door
2 adjustable shelves
Diagram shows L

Module Below 90 CMU6090BZ 60 267 284 307 340 393 444 504 550
module height 90 cm
1 blender 3.5 cm
1 recessed handle 3.5 cm
82,75 1 pullout

Module Below 90 CMU6090BZIS 60 324 341 364 397 450 500 560 607
module height 90 cm
1 blender 3.5 cm
1 recessed handle 3.5 cm
82,75 1 pullout
1 inner drawer

Module Below 90 CMU6090BZIZ 60 345 363 386 419 472 522 582 629
module height 90 cm
1 blender 3.5 cm
1 recessed handle 3.5 cm
82,75 1 pullout
1 inner pullout

Module Below 90 CMU6090BZIS2 60 381 398 421 454 507 557 617 664
module height 90 cm
1 blender 3.5 cm
1 recessed handle 3.5 cm
82,75 1 pullout
2 inner drawers

Module Below 90 CMU6090BZ2 60 470 499 529 570 637 704 785 856
module height 90 cm
39,5 1 blender 3.5 cm
2 recessed handles, 3.5 cm each
39,75 2 pullouts

Module Below 90 CMU6090BSZ2 60 571 610 653 712 839 962 1051 1143
13,0 module height 90 cm
26,25 1 blender 3.5 cm
2 recessed handles, 3.5 cm each
39,75 1 drawer
2 pullouts

1/2022 44.03
 Price group
Modules Below
below appliance niche with door

Neutral
Modules heights 27, 40, 70 and 86 cm for front line 73 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Module Below 27 CMU6027Z 60 152 159 173 188 222 253 298 326
module height 27 cm
26
1 pullout

Module Below 40 CMU6040Z 60 224 238 260 285 325 363 420 458
module height 40 cm
40
1 pullout

Module Below 70 CMU6070T L/R 60 171 183 211 239 292 343 398 434
module height 70 cm
70 1 door
2 adjustable shelves

Diagram shows L

Module Below 70 CMU6070Z 60 247 265 287 320 369 419 475 519
module height 70 cm
70 1 pullout

Module Below 70 CMU6070ZIZ 60 358 371 396 428 477 527 628 685
module height 70 cm
70 1 pullout
1 inner pullout

Module Below 70 CMU6070Z2 60 479 519 555 611 668 724 862 940
26 module height 70 cm
2 pullouts
40 1 recessed handle 3.5 cm

Module Below 70 CMU6070S2Z 60 582 626 670 735 862 991 1082 1180
13 module height 70 cm
13
2 drawers
40
1 recessed handle 3.5 cm
1 pullout

Module Below 86 CMU6086SZ 60 503 529 577 639 744 848 938 1022
13 module height 86 cm
1 drawer
70
1 recessed handle 3.5 cm
1 pullout

Module Below 86 CMU6086SZ2 60 605 649 696 760 889 1017 1111 1211
13 module height 86 cm
26 1 drawer
40 2 recessed handles, 3.5 cm each
2 pullouts

44.04 1/2022
 Price group
Modules Below
below appliance niche with door

Neutral
Modules heights 27, 40, 83 and 99 cm for front line 86 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Module Below 27 CMU6027Z 60 152 159 173 188 222 253 298 326
module height 27 cm
26
1 pullout

Module Below 40 CMU6040Z 60 224 238 260 285 325 363 420 458
module height 40 cm
40
1 pullout

Module Below 83 CMU6083T L/R 60 194 211 234 268 323 377 439 479
module height 83 cm
1 door
2 adjustable shelves
82,75

Diagram shows L

Module Below 83 CMU6083Z 60 273 288 313 346 402 455 519 565
module height 83 cm
1 pullout

82,75

Module Below 83 CMU6083ZIS 60 330 345 370 403 459 512 576 621
module height 83 cm
1 pullout
1 inner drawer
82,75

Module Below 83 CMU6083ZIZ 60 352 367 392 425 481 534 598 643
module height 83 cm
1 pullout
1 inner pullout
82,75

Module Below 83 CMU6083ZIS2 60 387 402 427 460 516 569 633 678
module height 83 cm
1 pullout
2 inner drawers
82,75

Module Below 83 CMU6083Z2 60 480 518 555 611 667 722 862 940
module height 83 cm
39,5 2 pullouts
1 recessed handle 3.5 cm
39,75

Module Below 83 CMU6083SZ2 60 566 604 647 706 830 952 1043 1137
13,0 module height 83 cm
26,25 1 drawer
2 pullouts
39,75 1 recessed handle 3.5 cm

Module Below 99 CMU6099SZ2 60 578 616 660 720 847 971 1065 1160
13,0 module height 99 cm
1 drawer
39,5
2 recessed handles, 3.5 cm each
39,75
2 pullouts

1/2022 44.05
 Price group
Modules Below
Appliance niche with door, open below appliance niche

Neutral
Modules heights 77, 90, 94, 101, 111, 125 and 138 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Module Below .
Appliance niche with door
1 blender 3.5 cm
1 recessed handle 3.5 cm

Diagram shows L 1 door 69.5 cm high in front of Front line 73 cm

appliance niche 65 cm CMGT6077B L/R 60 176 200 236 284 336 389 467 511
module height 77 cm

1 door 82.75 cm high in front of Front line 86 cm

appliance niche 72 cm CMGT6090B L/R 60 195 226 263 315 383 449 524 572
module height 90 cm

1 door 87 cm high in front of CMGT6094B L/R 60 194 226 265 314 383 450 525 574
appliance niche 72 cm
module height 94 cm

1 door 94 cm high in front of CMGT60101B L/R 60 201 231 275 325 398 469 537 585
appliance niche 88 cm
module height 101 cm

1 door 104 cm high in front of CMGT60111B L/R 60 213 236 281 338 414 490 550 600
appliance niche 88 cm
module height 111 cm

1 door 118 cm high in front of CMGT60125B L/R 60 220 241 288 346 427 509 565 615
appliance niche 103 cm
module height 125 cm

1 door 131 cm high in front of CMGT60138B L/R 60 225 247 297 356 442 525 578 630
appliance niche 122 cm
module height 138 cm

Price group
Modules Appliance niche (open)
below touch opening

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance niche .
(open)

1 appliance niche 33 - 43 cm CMGN6045 60 36 41 49 62 87 109 142 154

1 appliance niche 44 - 56 cm CMGN6058 60 36 41 49 62 87 109 142 154

1 appliance niche 57 - 60 cm CMGN6068 60 36 41 49 62 87 109 142 154

1 appliance niche 82 - 95 cm CMGN6097 60 36 41 49 62 87 109 142 154

1 appliance niche 96 - 108 cm CMGN60110 60 36 41 49 62 87 109 142 154

1 appliance niche 109 - 122 cm CMGN60124 60 36 41 49 62 87 109 142 154

Bracket for appliance per pair

1 pair of steel appliance brackets GUWIN 44
6 x 6 cm, 50 cm long
for receiving appliances
For optimising gaps (min. 0.3 cm)
between two appliances.
Installation on site.

2 appliances can be placed in one niche if

GUWIN is ordered in addition.
For the relevant appliance niche MGN.. both
appliance types must be stated.

44.06 1/2022
 Price group
Modules Appliance niche (open)
below touch opening

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance double niche .
(open)

1 appliance double niche 66 - 76 cm CMGN6084D 60 36 41 49 62 87 109 142 154

1 appliance double niche 82 - 95 cm CMGN6097D 60 36 41 49 62 87 109 142 154

1 appliance double niche 96 - 108 cm CMGN60110D 60 36 41 49 62 87 109 142 154

1 appliance double niche 109 - 122 cm CMGN60124D 60 36 41 49 62 87 109 142 154

Price group
Modules Appliance niche (open)
with recessed handle and blender

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance niche .
(open)
1 recessed handle 3.5 cm
1 blender 3.5 cm

1 appliance niche 33 - 43 cm CMGN6052B 60 124 142 154 178 211 244 288 314

1 appliance niche 44 - 56 cm CMGN6065B 60 124 142 154 178 211 244 288 314

1 appliance niche 57 - 60 cm CMGN6075B 60 124 142 154 178 211 244 288 314

1 appliance niche 82 - 95 cm CMGN60104B 60 124 142 154 178 211 244 288 314

1 appliance niche 96 - 108 cm CMGN60117B 60 124 142 154 178 211 244 288 314

1 appliance niche 109 - 122 cm CMGN60131B 60 124 142 154 178 211 244 288 314

Bracket for appliance per pair

1 pair of steel appliance brackets GUWIN 44
6 x 6 cm, 50 cm long
for receiving appliances
For optimising gaps (min. 0.3 cm)
between two appliances.
Installation on site.

2 appliances can be placed in one niche if

GUWIN is ordered in addition.
For the relevant appliance niche MGN.. both
appliance types must be stated.

Module Appliance double niche .

(open)
1 recessed handle 3.5 cm
1 blender 3.5 cm

1 appliance double niche 66 - 76 cm CMGN6091DB 60 124 142 154 178 211 244 288 314

1 appliance double niche 82 - 95 cm CMGN60104DB 60 124 142 154 178 211 244 288 314

1 appliance double niche 96 - 108 cm CMGN60117DB 60 124 142 154 178 211 244 288 314

1 appliance double niche 109 - 122 cm CMGN60131DB 60 124 142 154 178 211 244 288 314

1/2022 44.07
 Price group
Modules Appliance niche with door
only as Module below

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance niche with .
door

1 door 82.75 cm high in front of CMGT6086 L/R 60 121 136 171 213 265 314 391 426
appliance niche 72 cm
Diagram shows L

1 door 108 cm high in front of CMGT60111 L/R 60 134 159 194 241 306 371 431 468
appliance niche 103 cm

1 door 118 cm high in front of CMGT60121 L/R 60 145 164 203 251 323 392 445 483
appliance niche 103 cm

1 door 121 cm high in front of CMGT60124 L/R 60 154 170 212 265 338 409 460 503
appliance niche 103 cm

1 door 131 cm high in front of CMGT60134 L/R 60 159 176 222 275 351 427 472 515
appliance niche 122 cm

1 door 134 cm high in front of CMGT60137 L/R 60 159 176 222 275 351 427 472 515
appliance niche 122 cm

1 door 144 cm high in front of CMGT60147 L/R 60 159 176 222 275 351 427 472 515
appliance niche 122 cm

1 door 148 cm high in front of CMGT60151 L/R 60 159 176 222 275 351 427 472 515
appliance niche 140 cm

2 doors or 1 door 158 cm high CMGT60161 L/R 60 201 222 272 321 406 493 546 595
in front of appliance niche 140 cm

Module Appliance niche with .

door

2 doors or 1 door strap. together 197 cm Front line 73 cm

high in front of appliance niche 178 cm CMGT60197 L/R 60 247 294 378 485 559 634 730 795
with special handle
Not available in IOS-C, IOS-M-C
1 support hinge SSCH
when the front projects more than 26 cm
from the appliance
Diagram shows L

2 doors or 1 door strap. together 210 cm Front line 73 cm

high in front of appliance niche 178 cm CMGT60210 L/R 60 290 345 436 580 659 736 834 908
with special handle
1 support hinge SSCH Not available in IOS-C, IOS-M-C
when the front projects more than 26 cm
from the appliance

2 doors or 1 door strap. together 224 cm Front line 73 cm

high in front of appliance niche 178 cm CMGT60224 L/R 60 329 394 493 674 757 840 938 1021
with special handle
Not available in IOS-C, IOS-M-C
1 support hinge SSCH
when the front projects more than 26 cm
from the appliance

Support hinge for fridge and freezers ZSSCH 32

with appliance hinge
1 support hinge with base plate
for fitting on site
for additional requirement

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

44.08 1/2022
 Price group
Modules Appliance niche with door
not as Module below

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance niche with .
door
1 recessed handle 3.5 cm

1 door 88 cm high in front of CMGT6091 L/R 60 132 151 187 232 288 345 428 467
Diagram shows L appliance niche 72 cm

1 door 101 cm high in front of CMGT60104 L/R 60 143 168 204 255 321 385 459 499
appliance niche 88 cm

1 door 110.9 cm high in front of CMGT60114 L/R 60 149 171 214 265 335 407 473 514
appliance niche 103 cm

1 door 115 cm high in front of CMGT60118 L/R 60 159 179 221 276 354 429 487 530
appliance niche 103 cm

1 door 124.15 cm high in front of CMGT60128 L/R 60 159 179 221 276 354 429 487 530
appliance niche 103 cm

1 door 128 cm high in front of CMGT60131 L/R 60 168 185 231 288 369 448 504 549
appliance niche 122 cm

1 door 137.4 cm high in front of CMGT60141 L/R 60 171 192 243 300 384 468 516 562
appliance niche 122 cm

1 door 141 cm high in front of CMGT60144 L/R 60 171 192 243 300 384 468 516 562
appliance niche 122 cm

2 doors or 1 door 150.65 cm high CMGT60154 L/R 60 171 192 243 300 384 468 516 562
in front of appliance niche 140 cm

Price group
Modules Above for recessed handle
Modules heights 27, 36, 40, 50, 53, 63, 66, 80 and 93 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Above 27 CMO6027K 60 144 160 177 202 240 276 329 359
module height 27 cm
1 top hinged door

Module Above 36 CMO6036K 60 160 178 202 225 270 317 376 410
module height 36 cm
1 top hinged door

Module Above 40 CMO6040T L/R 60 140 154 178 204 250 293 354 384
module height 40 cm
1 door
1 adjustable shelf
Diagram shows L

Module Above 40 CMO6040K 60 173 191 214 239 288 337 390 425
module height 40 cm
1 top hinged door
1 adjustable shelf

Module Above 50 CMO6050T L/R 60 153 175 200 230 281 333 376 410
module height 50 cm
1 door
1 adjustable shelf
Diagram shows L

Module Above 50 CMO6050K 60 189 209 234 265 318 370 410 446
module height 50 cm
1 top hinged door
1 adjustable shelf

Module Above 53 CMO6053T L/R 60 153 175 200 230 281 333 376 410
module height 53 cm
1 door
1 adjustable shelf
Diagram shows L

1/2022 44.09
 Price group
Modules Above for recessed handle
Modules heights 27, 36, 40, 50, 53, 63, 66, 80 and 93 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Above 53 CMO6053K 60 189 209 234 265 318 370 410 446
module height 53 cm
1 top hinged door
1 adjustable shelf

Module Above 63 CMO6063T L/R 60 187 202 230 263 320 375 435 475
module height 63 cm
1 door
2 adjustable shelves

Diagram shows L

Module Above 66 CMO6066T L/R 60 187 202 230 263 320 375 435 475
module height 66 cm
1 door
2 adjustable shelves

Diagram shows L

Module Above 80 CMO6080T L/R 60 197 213 244 276 334 393 456 497
module height 80 cm
1 door
2 adjustable shelves

Diagram shows L

Module Above 93 CMO6093T L/R 60 222 243 270 309 370 431 504 549
module height 93 cm
1 door
3 adjustable shelves

Diagram shows L

Price group
Modules Above with touch opening
Modules heights 27, 40, 53, 66, 80 and 93 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Above 27 CMO6027KS 60 94 103 115 133 164 193 237 259
module height 27 cm
1 top hinged door with „sesame-closure“

Module Above 40 CMO6040TS L/R 60 89 96 114 133 170 206 259 281
module height 40 cm
1 door with „sesame-closure“
1 adjustable shelf
Diagram shows L

Module Above 40 CMO6040KS 60 120 130 150 168 205 243 293 318
module height 40 cm
1 top hinged door with „sesame-closure“
1 adjustable shelf

Module Above 53 CMO6053TS L/R 60 103 115 134 159 204 249 279 306
module height 53 cm
1 door with „sesame-closure“
1 adjustable shelf
Diagram shows L

Module Above 53 CMO6053KS 60 136 150 171 193 239 283 316 344
module height 53 cm
1 top hinged door with „sesame-closure“
1 adjustable shelf

Module Above 66 CMO6066TS L/R 60 134 143 164 192 241 288 340 371
module height 66 cm
1 door with „sesame-closure“
2 adjustable shelves

Diagram shows L

44.10 1/2022
 Price group
Modules Above with touch opening
Modules heights 27, 40, 53, 66, 80 and 93 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Above 80 CMO6080TS L/R 60 145 153 179 207 257 307 361 393
module height 80 cm
1 door with „sesame-closure“
2 adjustable shelves

Diagram shows L

Module Above 93 CMO6093TS L/R 60 172 182 207 238 293 344 407 443
module height 93 cm
1 door with „sesame-closure“
3 adjustable shelves

Diagram shows L

Price group
Tall unit top cupboards
Carcase height 26.5 / 39.75 / 53.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Tall unit top cupboard CHAK3027S 30 173 177 193 208 243 281 303 332
Carcase height 26.5 cm CHAK4527S 45 185 191 207 222 263 302 327 355
1 top hinged door with „sesame-closure“ CHAK5027S 50 188 195 213 229 270 306 336 365
CHAK6027S 60 194 205 221 239 280 317 345 376
No wall fixing. CHAK9027S 90 281 307 331 377 433 489 541 589

Tall unit top cupboard CHA3040S L/R 30 170 175 188 207 242 280 308 338
Carcase height 39.75 cm CHA4540S L/R 45 178 183 203 222 266 306 343 374
1 door with „sesame-closure“ CHA5040S L/R 50 181 190 213 230 280 330 349 382
1 adjustable shelf CHA6040S L/R 60 190 201 223 242 291 338 367 400
Diagram shows L
No wall fixing.

Tall unit top cupboard CHA9040S 90 271 302 332 377 444 509 577 629
Carcase height 39.75 cm
2 doors
(right hand door with touch opening)
1 adjustable shelf

No wall fixing.

Tall unit top cupboard CHAK3040S 30 192 199 214 232 270 303 335 364
Carcase height 39.75 cm CHAK4540S 45 203 209 229 245 290 333 367 400
1 top hinged door with „sesame-closure“ CHAK5040S 50 207 216 237 251 302 353 372 405
1 adjustable shelf CHAK6040S 60 216 227 246 268 313 361 393 428
CHAK9040S 90 297 327 355 419 475 530 601 656
No wall fixing.

Tall unit top cupboard CHA3053S L/R 30 193 203 225 240 270 295 339 368
Carcase height 53.0 cm CHA4553S L/R 45 195 209 229 266 297 331 349 382
1 door with „sesame-closure“ CHA5053S L/R 50 207 215 232 268 318 370 383 416
1 adjustable shelf CHA6053S L/R 60 213 223 240 280 327 372 403 442

Diagram shows L No wall fixing.

Tall unit top cupboard CHA9053S 90 308 325 359 429 469 548 628 685
Carcase height 53.0 cm
2 doors
(right hand door with touch opening)
1 adjustable shelf

No wall fixing.

1/2022 44.11
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 26.5 cm
Side depth 34 cm FS2734 L/R 34 0 0 43 60 90 113 59
Side depth 46 cm FS2746 L/R 46 0 0 52 76 116 145 76
Side depth 56 cm FS2756 L/R 56 0 0 52 76 116 145 76
Side depth 61 cm FS2761 L/R 61 0 0 62 87 134 166 89
Side depth 66 cm FS2766 L/R 66 0 0 62 87 134 166 89
Side depth 76 cm FS2776 L/R 76 0 0 65 93 142 177 93

Carcase height 39.75 cm

Diagram shows R Side depth 34 cm FS4034 L/R 34 0 0 43 63 93 116 60
Side depth 46 cm FS4046 L/R 46 0 0 58 83 122 153 79
Side depth 56 cm FS4056 L/R 56 0 0 58 83 122 153 79
Side depth 61 cm FS4061 L/R 61 0 0 66 97 141 176 92
Side depth 66 cm FS4066 L/R 66 0 0 66 97 141 176 92
Side depth 76 cm FS4076 L/R 76 0 0 70 102 149 186 98

Carcase height 53.0 cm

Side depth 34 cm FS5334 L/R 34 0 0 44 65 93 117 62
Side depth 46 cm FS5346 L/R 46 0 0 65 93 129 161 84
Side depth 56 cm FS5356 L/R 56 0 0 65 93 129 161 84
Side depth 61 cm FS5361 L/R 61 0 0 77 112 158 201 105
Side depth 66 cm FS5366 L/R 66 0 0 77 112 158 201 105
Side depth 76 cm FS5376 L/R 76 0 0 84 122 170 214 110

Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall unit top cupboards FSOL L/R 46 46 - - - - -

Leading edge as carcase exterior side.

Visible carcase side with .

depth increase
Carcase height 26.5 cm
Side depth up to 34 cm FSUEL2734 L/R 34 66 66 109 126 156 179 125
Side depth up to 46 cm FSUEL2746 L/R 46 66 66 118 142 182 211 142
Side depth up to 58 cm FSUEL2758 L/R 58 66 66 118 142 182 211 142
Side depth up to 63 cm FSUEL2763 L/R 63 66 66 128 153 200 232 155
Side depth up to 68 cm FSUEL2768 L/R 68 107 107 169 194 241 273 196
Side depth up to 76 cm FSUEL2776 L/R 76 107 107 172 200 249 284 200

Diagram shows R
Carcase height 39.75 cm
Side depth up to 34 cm FSUEL4034 L/R 34 66 66 109 129 159 182 126
Side depth up to 46 cm FSUEL4046 L/R 46 66 66 124 149 188 219 145
Side depth up to 58 cm FSUEL4058 L/R 58 66 66 124 149 188 219 145
Side depth up to 63 cm FSUEL4063 L/R 63 66 66 132 163 207 242 158
Side depth up to 68 cm FSUEL4068 L/R 68 107 107 173 204 248 283 199
Side depth up to 76 cm FSUEL4076 L/R 76 107 107 177 209 256 293 205

Carcase height 53.0 cm

Side depth up to 34 cm FSUEL5334 L/R 34 66 66 110 131 159 183 128
Side depth up to 46 cm FSUEL5346 L/R 46 66 66 131 159 195 227 150
Side depth up to 58 cm FSUEL5358 L/R 58 66 66 131 159 195 227 150
Side depth up to 63 cm FSUEL5363 L/R 63 66 66 143 178 224 267 171
Side depth up to 68 cm FSUEL5368 L/R 68 107 107 184 219 265 308 212
Side depth up to 76 cm FSUEL5376 L/R 76 107 107 191 229 277 321 217

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“ on page 10.07.

44.12 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 154.15 cm
Front finish with recessed handle above
CHP20154 L/R 20 94 98 103 115 124 132 138 152
Front finish blenders are manufactured with a maximum
20 cm width. Carcase height 197.4 cm
CHP20197 L/R 20 82 97 101 109 121 131 133 148

Carcase height 210.65 cm

CHP20210 L/R 20 98 109 112 121 136 156 161 175
Diagram shows L
Carcase height 223.9 cm
CHP20224 L/R 20 115 127 131 143 164 182 189 208

Carcase height 250 cm

CHP20250 L/R 20 164 204 208 229 251 291 311 314

Wall unit blender Carcase height 26.5 cm

Front finish COP2027 L/R 20 52 53 55 55 60 64 65 70

Carcase height 39.75 cm

COP2040 L/R 20 52 53 56 60 64 67 67 72

Carcase height 53.0 cm

COP2053 L/R 20 52 53 57 65 67 69 70 77

Tall unit corner blender 90° Carcase height 154.15 cm

Front finish with recessed handle above
freely selectable leg measurement CHPE154 10 170 183 204 213 232 249 266 287
from 4 x 4 cm to 10 x 10 cm width
Carcase height 197.4 cm
Flush with front. CHPE197 10 176 193 212 225 250 279 286 311
Please state rear length (inside measurement)
from l to r on order. Carcase height 210.65 cm
CHPE210 10 184 209 219 237 272 302 311 340
4
Carcase height 223.9 cm
CHPE224 10 221 246 259 283 323 360 370 403
4

Carcase height 250 cm

CHPE250 10 247 286 295 325 384 438 446 486

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 154.15 cm

Front finish with recessed handle above
Freely selectable angle up to max. 270° CHPEW154 10 195 216 234 239 266 288 302 331
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from Carcase height 197.4 cm
3 x 3 cm up to 10 x 10 cm width CHPEW197 10 180 200 219 227 254 284 288 313

Flush with front. Carcase height 210.65 cm

Please state rear length (inside measurement) CHPEW210 10 199 222 232 248 283 313 324 352
3 from l to r on order.
Carcase height 223.9 cm
3

CHPEW224 10 236 263 277 297 336 374 385 418

Carcase height 250 cm

CHPEW250 10 288 320 327 365 423 464 490 530
Carcase height 154.15 / 197.4 / 210.65 / 223.9 / 250 cm:
Not available in IOS-C, IOS-M-C

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided blender .
Divided over front height 39.75 cm CANBT40 39
with recessed handle

Divided over front height 69.5 cm CANBT73 39

with recessed handle

Divided over front height 82.75 cm CANBT86 39

with recessed handle

Suitable for blenders.

1/2022 44.13
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
TFA .. Carcase-connection strip ANTFA 26
for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 154.15 cm
flush with carcase HSB20154 20 46 49 53 72 77 82 99 67

Carcase height 197.4 cm

HSB20197 20 49 51 59 76 83 89 104 70

Carcase height 210.65 cm

HSB20210 20 53 58 65 86 93 99 117 81

Carcase height 223.9 cm

HSB20224 20 62 68 77 102 110 117 139 96

44.14 1/2022
CONTINO
Tall units, carcase height 154.15 cm

CARCASE LINE 80

Tall units 45. 01

Housing units 45. 02

Elevated dishwashers 45. 03

Tall shelf units 45. 04

Visible carcase sides 45. 05

End panels 45. 05

Blenders 45. 06

Support panels with plinth 45. 07

Blenders 45. 07

Rear panels 45. 07

154.15 cm
CONTINO
Tall units
45.

1/2022 45.
 CONTINO
Tall units, carcase height 154.15 cm
T: Cupboard depth cm

Function cupboards Housing units Elevated dishwashers Shelves

45.01 T: 36 / 48 / 58 cm 45.02 T: 58 cm 45.03 T: 58 cm 45.04 T: 36 / 58 cm

3,5
CH 30 154 CHG 60 154 6 Z CTGSU 60 46 Z HR 30 154
CH 45 154 HR 60 154
CH 50 154 3,5–10,15 HR 90 154
CH 60 154
46,25
150,65 76,0

45.01 45.02 45.03 45.04

T: 36 / 48 / 58 cm
3,5
T: 58 cm CGFV 60 75 T: 36 / 58 cm
CH 90 154 CHG 60 154 6 Z2 CGFV 60 81 H3R 30 154
CH 120 154 H3R 60 154
3,5–10,15 H3R 90 154
26,25
150,65

46,25

45.01 T: 36 / 48 / 58 cm 45.02 T: 58 cm 45.03 T: 58 cm

3,5
CH 30 154 IZ4 CHG 60 154 11D Z CHGA 60 28 Z
CH 45 154 IZ4 CHGA 60 33 Z
CH 50 154 IZ4
CH 60 154 IZ4
3,5

150,65 46,25

45.01 T: 36 / 48 / 58 cm 45.02 T: 58 cm
CH 90 154 IZ4 CHGT 60 154 12 IS
CHGTI 60 154 12 IS
150,65

150,65

45.01 T: 58 cm 45.02 T: 58 cm
CH 30 154 VZ CHGT 60 154 14
CH 45 154 VZ CHGTI 60 154 14

150,65 150,65

45.01
CH 30 154 N
CH 45 154 N
CH 50 154 N
CH 60 154 N
150,65
154.15 cm
CONTINO
Tall units

45.

45. 1/2022
 Price group
Tall units
Carcase height 154.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit CH30154 L/R 30 464 493 521 585 652 719 799 871
1 door CH45154 L/R 45 482 515 539 635 705 774 876 954
4 adjustable shelves CH50154 L/R 50 498 527 553 670 741 813 906 986
CH60154 L/R 60 527 558 606 714 792 868 970 1057
Finishing top necessary, see page 81.04
and chapter 71.
150,65

Diagram shows L

Storage unit CH90154 90 823 877 915 1081 1198 1315 1486 1621
2 doors CH120154 120 1119 1194 1224 1447 1605 1762 2004 2184
4 adjustable shelves

With 120 cm width shelves 2.8 cm thick.

Finishing top necessary, see page 81.04
150,65

and chapter 71.

Tall storage unit CH30154IZ4 L/R 30 1025 1061 1083 1156 1225 1293 1406 1530
1 door CH45154IZ4 L/R 45 1041 1073 1098 1193 1263 1331 1433 1562
4 inner pullouts CH50154IZ4 L/R 50 1057 1087 1112 1229 1300 1368 1463 1593
CH60154IZ4 L/R 60 1087 1116 1165 1272 1350 1427 1529 1668
Finishing top necessary, see page 81.04
and chapter 71.
150,65

Diagram shows L
Exchange wide angle hinge ANIGE 0
through standard hinge, with spacer strip

Tall storage unit CH90154IZ4 90 1415 1470 1508 1674 1792 1908 2078 2265
2 doors
4 inner pullouts

Finishing top necessary, see page 81.04

and chapter 71.
150,65

Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Storage unit CH30154VZ 30 1031 1090 1106 1198 1252 1306 1385 1509
1 large capacity pullout with front panel CH45154VZ 45 1131 1194 1208 1330 1393 1454 1540 1678
5 adjustable wire baskets with glass bottoms

Max. loading 15 kg per basket.

Finishing top necessary, see page 81.04
150,65 and chapter 71.

VZ-premium equipment MPVZ30P5 110

Frame inside faced in carcase style MPVZ45P5 153
5 adjustable shelves with glass sides

Niche door CH30154N L/R 30 293 342 330 396 451 504 559 609
1 door with original recessed handle CH45154N L/R 45 314 346 348 407 476 546 587 641
and attached plinth CH50154N L/R 50 320 357 355 443 514 583 641 698
no rear panel CH60154N L/R 60 331 367 372 463 538 611 683 744
no floor
150,65

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
Finishing top necessary, see page 81.04
Diagram shows L and chapter 71.

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 45.01
 Price group
Housing units
Carcase height 154.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
3,5 Housing unit CHG601546Z 60 680 719 758 822 917 1011 1127 1208
1 recessed handle 3.5 cm
1 blender 3.5 cm Modular parts list
3,5–10,15 1 appliance niche 57-60 cm CHGM60154
1 blender CMGN6075B
1 recessed handle 3.5 cm CMU6083BZ
76,0
1 pullout

For ovens.
Finishing top necessary, see page 81.04
and chapter 71.

3,5 Housing unit CHG601546Z2 60 876 933 987 1072 1166 1259 1462 1573
1 recessed handle 3.5 cm
1 blender 3.5 cm Modular parts list
3,5–10,15 1 appliance niche 57-60 cm CHGM60154
26,25 1 blender CMGN6075B
1 recessed handle 3.5 cm CMU6083BZ2
46,25
1 pullout
1 recessed handle 3.5 cm
1 pullout

For ovens.
Finishing top necessary, see page 81.04
and chapter 71.

3,5 Housing unit CHG6015411DZ 60 649 686 728 779 864 946 1062 1135
1 recessed handle 3.5 cm
1 blender 3.5 cm
1 appliance double niche 96-108 cm
1 blender
3,5
1 recessed handle 3.5 cm
46,25 1 pullout

For microwave/oven combination (built-in trim kit

will be necessary).
Finishing top necessary, see page 81.04
and chapter 71.

Housing unit CHGT6015412IS L/R 60 485 530 585 646 739 830 884 965
1 recessed handle 3.5 cm
1 door for appliance niche 122 cm with integral ventilation
1 inner drawer CHGTI6015412IS L/R 60 485 530 585 646 739 830 884 965

For integrated fridge and freezer.

150,65 Finishing top necessary, see page 81.04
and chapter 71.
Diagram shows L It is necessary to fit ventilator grille into finishing
top of refrigeration housing.

Housing unit CHGT6015414 L/R 60 410 431 482 539 623 707 755 801
1 recessed handle 3.5 cm
1 door for appliance niche 140 cm with integral ventilation
CHGTI6015414 L/R 60 410 431 482 539 623 707 755 801
For integrated fridge and freezer.
Finishing top necessary, see page 81.04 Modular parts list
150,65 and chapter 71. CHGM60154
It is necessary to fit ventilator grille into finishing CMGT60154
Diagram shows L top of refrigeration housing.

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

45.02 1/2022
 Price group
Elevated dishwashers
Carcase height 154.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Dishwasher support CTGSU6046Z 60 442 456 459 499 546 594 634 691
Carcase height 36.5 cm
1 pullout with 46 cm high front panel
and chamfered edge at the bottom
46,25 for opening
1 drip tray

No recessed handle / horizontal joint 0.25 cm.

IOS-C and IOS-M-C only possible with 0.8 cm joint!

Dishwasher-front Module height 75 cm

for fully integrated dishwasher, Appliance height 82 cm
height 82 or 87 cm. CGFV6075 60 125 130 166 203 240 280 338 367

Please state appliance model on order! Module height 80 cm

Side panel or fixing essential e.g. Appliance height 87 cm
panels or cupboards. CGFV6081 60 125 130 166 203 240 280 338 367

Dishwasher-Top cupboard CHGA6028Z L/R 60 357 367 387 408 454 496 552 603
1 recessed handle 3.5 cm CHGA6033Z L/R 60 357 367 387 408 454 496 552 603
1 pullout
1 recessed handle 3.5 cm

Side panel or fixing essential e.g. panels

or tall units.
Finishing top necessary, see page 81.04
and chapter 71.

1/2022 45.03
 Surface style
Tall shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 154.15 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit Shelf unit depth 36.2 cm
5 adjustable shelves HR3015436 10-30 630 645 714 899 - 998 1147 915
HR6015436 30-60 679 705 787 977 - 1092 1251 997
Widths in mm grid variably available. HR9015436 60-90 728 765 860 1055 - 1186 1355 1079
Please state desired width.
Finishing top necessary, see page 81.04 Shelf unit depth 58.2 cm
and chapter 71. HR30154 10-30 673 689 763 961 - 1067 1226 977
HR60154 30-60 726 753 841 1044 - 1167 1338 1066
HR90154 60-90 778 818 919 1128 - 1268 1449 1154

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.

Surface style
Tall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 154.15 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit, Shelf unit depth 36.2 cm
thick 2.8 cm H3R3015436 10-30 698 713 783 967 1017 1066 1215 992
Back panel with circumferential shadow joint H3R6015436 30-60 748 773 855 1045 1103 1161 1319 1076
3 shelves H3R9015436 60-90 798 833 927 1123 1190 1256 1423 1161

Shelf unit interior colour = shelf unit exterior colour. Shelf unit depth 58.2 cm
Widths in mm grid variably available. H3R30154 10-30 754 769 846 1047 1101 1154 1313 1071
Please state desired width. H3R60154 30-60 803 831 922 1127 1190 1252 1423 1160
Available without extra charge for free standing H3R90154 60-90 852 893 998 1207 1279 1350 1533 1248
planning, optional without back panel with visible
edges at the rear. Please state on order.
Finishing top necessary, see page 81.04
and chapter 71.

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Extra charge for basis shelf unit 58.2 cm deep.

45.04 1/2022
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 154.15 cm
Side depth 34 cm FS15434 L/R 34 0 0 100 144 215 268 139
Side depth 46 cm FS15446 L/R 46 0 0 131 189 267 335 176
Side depth 56 cm FS15456 L/R 56 0 0 131 189 267 335 176
Side depth 61 cm FS15461 L/R 61 0 0 151 218 307 386 204
Side depth 66 cm FS15466 L/R 66 0 0 151 218 307 386 204
Side depth 76 cm FS15476 L/R 76 0 0 159 230 327 409 216
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 154.15 cm
Side depth up to 34 cm FSUEL15434 L/R 34 92 92 192 236 307 360 231
Side depth up to 46 cm FSUEL15446 L/R 46 92 92 223 281 359 427 268
Side depth up to 58 cm FSUEL15458 L/R 58 92 92 223 281 359 427 268
Side depth up to 63 cm FSUEL15463 L/R 63 92 92 243 310 399 478 296
Side depth up to 68 cm FSUEL15468 L/R 68 146 146 297 364 453 532 350
Side depth up to 76 cm FSUEL15476 L/R 76 146 146 305 376 473 555 362
Diagram shows R

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit end panel Carcase height 154.15 cm
Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) CHW515458 5 399 417 473 530 570 607 646 693
Width 5 cm
with recessed handle above

Please state the relevant L/R.

150,65 The end panel width is always 5 cm.

Diagram shows L

Tall unit panel Basic type

with side shelf unit area Depth up to 62.5 cm
1 recessed handle front and side, above CHW1515458R L/R 15 638 665 706 792 865 939 1021 1113
1 fixed front at the front
with side frame in front colour Extra charge interior
3 shelves MPK/KH/KG 0
150,65 Always state interior style, MPFF/PF/VM 169
possible colours see chapter 11! MPFS/ME 248
Diagram shows R
MPFG 402
Without plinth! MPH 328
The plinth end finishes at the last cupboard.
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
VALAIS-C

1/2022 45.05
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 154.15 cm
Front finish with recessed handle above
CHP20154 L/R 20 94 98 103 115 124 132 138 152
Front finish blenders are manufactured with a maximum
20 cm width.
150,65

Diagram shows L

Tall unit corner blender 90° Carcase height 154.15 cm

Front finish with recessed handle above
freely selectable leg measurement CHPE154 10 170 183 204 213 232 249 266 287
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

150,65 Please state rear length (inside measurement)
from l to r on order.
4
4

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 154.15 cm

Front finish with recessed handle above
Freely selectable angle up to max. 270° CHPEW154 10 195 216 234 239 266 288 302 331
(Programme BOSSA-C permitted up to 180°)
Not available in IOS-C, IOS-M-C
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width
150,65
Flush with front.
3 Please state rear length (inside measurement)
from l to r on order.
3

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided blender .
Divided over front height 46.25 cm CANBT46 39
with recessed handle

Divided over front height 76.0 cm CANBT80 39

with recessed handle

Suitable for blenders.

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

45.06 1/2022
 Surface style
Support panels with plinth Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MC H
Support panel with plinth CHWSP15456 L/R 56 169 169 331 436 478 520 594 461
for blender CHWSP15466 L/R 66 185 185 379 500 546 591 672 527
Thickness 1.6 cm
prepared for connection to
tall unit blenders with
recessed handle milling

Only as accessory type for blenders CHP ..,

not available loose!
Diagram shows R
For use next to appliances or an open niche.
Visible side facing the appliance or the open niche,
please state left/right version.

Support panel with plinth up to

Thickness 1.6 cm HWS15458 L/R 63 142 142 305 411 455 498 572 431
both sides finished HWS15468 L/R 70 163 163 341 462 516 570 653 495

Please state required depth.

Please state whether placed L/R and plinth height.
Fit plinth return (7 mm) on site.
Plinth height 1.5 cm larger for floor adjustment.
Diagram shows R

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 154.15 cm
flush with carcase HSB20154 20 46 49 53 72 77 82 99 67

Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front RWF154 326 355 444 541 709 873 999 1112
in variable sizes
Height up to 153.9 cm Not available in IOS-C, IOS-M-C
Max. width 120 cm
153,9 without recessed handle
with loose plinth

Minimum charged 0.5 metres.

Rear panel in RWF30154 30 181 204 255 311 369 427 477 521
front finish RWF45154 45 192 222 287 355 414 472 537 585
in fixed front sizes RWF50154 50 195 226 294 374 434 494 567 617
without recessed handle RWF60154 60 213 245 321 413 481 550 621 677
with loose plinth old RW .. 154
for carcase height 154.15 cm
153,9

1/2022 45.07
1/2022
CONTINO
Tall units, carcase height 190.65 cm

CARCASE LINE 80

Tall units 46. 01-03

Housing units 46. 03-04

Elevated dishwashers 46. 04

Tall shelf units 46. 05

Visible carcase sides 46. 05-06

End panels 46. 06

Blenders 46. 07

Support panels with plinth 46. 08

Blenders 46. 08

Rear panels 46. 08

190.65 cm
CONTINO
Tall units
46.

1/2022 46.
 CONTINO
Tall units, carcase height 190.65 cm
T: Cupboard depth cm

Function cupboards Housing units Elevated dishwashers Shelves

46.01 T: 36 / 48 / 58 cm 46.03 T: 58 cm 46.04 T: 58 cm 46.05 T: 36 / 58 cm

CH 30 190 36,25 CHG 60 190 6 K CTGSU 60 46 Z HR 30 190
CH 45 190 3,5 HR 60 190
CH 50 190 HR 90 190
110,9 CH 60 190 3,5

46,25

76,0 76,0

46.01 46.03 46.04 46.05

T: 36 / 48 / 58 cm T: 58 cm CGFV 60 75 T: 36 / 58 cm
CH 90 190 36,25
3,5
CHG 60 190 11D CGFV 60 81 H3R 30 190
CH 120 190 KZ H3R 60 190
H3R 90 190
110,9

3,5
76,0

46,25

46.01 T: 36 / 48 / 58 cm 46.04 T: 58 cm 46.04 T: 58 cm

36,25 CH 30 190 KX CHGT 60 190 10 CHGA 60 64
CH 45 190 KX CHGTI 60 190 10 CHGA 60 69
CH 50 190 KX
CH 60 190 KX 110,9

150,65 76,0

46.01 T: 58 cm 46.04 T: 58 cm
CH 30 190 ZIZ CHGT 60 190 18
CH 45 190 ZIZ CHGTI 60 190 18
CH 50 190 ZIZ
110,9 CH 60 190 ZIZ 110,9

76,0 76,0

46.01 T: 36 / 48 / 58 cm
CH 30 190 Z2
CH 45 190 Z2
CH 50 190 Z2
110,9 CH 60 190 Z2
26,25

46,25

46.01 T: 58 cm
CH 30 190 ZIZ3
CH 45 190 ZIZ3
CH 50 190 ZIZ3
110,9 CH 60 190 ZIZ3

76,0

46.02 T: 36 / 48 / 58 cm
CH 30 190 IZ4
CH 45 190 IZ4
CH 50 190 IZ4
110,9 CH 60 190 IZ4

76,0

46.02 T: 36 / 48 / 58 cm
CH 90 190 IZ4
110,9
76,0

46.02 T: 36 / 48 / 58 cm
36,25 CH 30 190 KIZ4X
CH 45 190 KIZ4X
CH 50 190 KIZ4X
CH 60 190 KIZ4X
190.65 cm
CONTINO
Tall units

150,65

46.02 T: 36 / 48 / 58 cm
CH 30 190 GVZ2
CH 45 190 GVZ2
CH 50 190 GVZ2
46. 110,9 CH 60 190 GVZ2

76,0

46.02 T: 58 cm
36,25 CH 30 190 KVZX
CH 45 190 KVZX

150,65

46.02 T: 58 cm
CH 45 190 HW
CH 50 190 HW
CH 60 190 HW
110,9

76,0

46.03
CH 30 190 N
CH 45 190 N
CH 50 190 N
CH 60 190 N
110,9
76,0

46. 1/2022
 Price group
Tall units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit CH30190 L/R 30 519 545 604 683 763 842 926 1010
1 door CH45190 L/R 45 539 571 641 732 820 907 999 1090
3 adjustable shelves CH50190 L/R 50 547 595 657 780 855 932 1057 1153
1 fixed shelf CH60190 L/R 60 584 628 696 845 931 1014 1127 1227
1 door
110,9
2 adjustable shelves

76,0

Diagram shows L

Storage unit CH90190 90 915 969 1091 1244 1393 1542 1701 1854
2 doors CH120190 120 1246 1308 1484 1642 1854 2070 2274 2478
3 adjustable shelves
1 fixed shelf
110,9

2 doors
2 adjustable shelves

With 120 cm width shelves 2.8 cm thick.

76,0

The cupboard has knock down fittings and

can be dismantled for access.

Storage unit CH30190KX L/R 30 519 545 604 683 763 842 926 1010
36,25 1 top hinged door CH45190KX L/R 45 539 571 641 732 820 907 999 1090
1 fixed shelf CH50190KX L/R 50 547 595 657 780 855 932 1057 1153
1 door CH60190KX L/R 60 584 628 696 845 931 1014 1127 1227
4 adjustable shelves

150,65

Diagram shows L

Tall storage unit CH30190ZIZ L/R 30 692 705 785 843 945 1041 1103 1203
1 door CH45190ZIZ L/R 45 704 735 805 896 985 1071 1165 1271
3 adjustable shelves CH50190ZIZ L/R 50 718 764 826 950 1026 1102 1226 1338
1 fixed shelf CH60190ZIZ L/R 60 756 799 870 1017 1103 1186 1298 1415
1 pullout
110,9
1 inner pullout

76,0

Diagram shows L

Tall storage unit CH30190Z2 L/R 30 724 751 813 896 979 1064 1151 1254
1 door CH45190Z2 L/R 45 750 784 856 951 1044 1134 1230 1342
3 adjustable shelves CH50190Z2 L/R 50 764 813 878 1004 1084 1165 1294 1410
1 fixed shelf CH60190Z2 L/R 60 802 849 919 1071 1162 1249 1365 1488
2 pullouts
110,9
26,25

46,25

Diagram shows L

Tall storage unit CH30190ZIZ3 L/R 30 1128 1146 1223 1282 1382 1482 1538 1676
1 door CH45190ZIZ3 L/R 45 1131 1163 1233 1325 1412 1499 1589 1733
2 adjustable shelves CH50190ZIZ3 L/R 50 1134 1180 1242 1365 1441 1516 1642 1790
2 inner pullouts CH60190ZIZ3 L/R 60 1164 1207 1277 1425 1509 1592 1705 1858
1 fixed shelf
110,9
1 pullout
1 inner pullout
76,0

Diagram shows L Exchange wide angle hinge ANIGE 0

through standard hinge, with spacer strip

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 46.01
 Price group
Tall units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Tall storage unit CH30190IZ4 L/R 30 1128 1146 1223 1282 1382 1482 1538 1676
1 door CH45190IZ4 L/R 45 1131 1163 1233 1325 1412 1499 1589 1733
2 adjustable shelves CH50190IZ4 L/R 50 1134 1180 1242 1365 1441 1516 1642 1790
2 inner pullouts CH60190IZ4 L/R 60 1164 1207 1277 1425 1509 1592 1705 1858
1 fixed shelf
110,9
1 door
2 inner pullouts
76,0

Diagram shows L Exchange wide angle hinge ANIGE 0

through standard hinge, with spacer strip

Tall storage unit CH90190IZ4 90 1509 1564 1683 1837 1987 2137 2295 2501
2 doors
2 adjustable shelves
2 inner pullouts
110,9

1 fixed shelf
2 doors
2 inner pullouts
76,0

The cupboard has knock down fittings and

can be dismantled for access.

Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Tall storage unit CH30190KIZ4X L/R 30 1099 1113 1192 1250 1349 1448 1508 1644
36,25 1 top hinged door CH45190KIZ4X L/R 45 1102 1131 1202 1293 1380 1468 1560 1701
1 fixed shelf CH50190KIZ4X L/R 50 1105 1149 1212 1335 1412 1487 1613 1757
1 door CH60190KIZ4X L/R 60 1132 1177 1247 1395 1480 1563 1675 1825
4 inner pullouts

Exchange wide angle hinge ANIGE 0

150,65
through standard hinge, with spacer strip
Diagram shows L

Pharmacy tall unit CH30190GVZ2 30 935 961 1020 1099 1179 1257 1342 1426
1 pullout with pullout and CH45190GVZ2 45 979 1011 1082 1173 1260 1347 1439 1530
drawer connection CH50190GVZ2 50 1000 1047 1109 1233 1308 1385 1510 1606
1 fixed shelf CH60190GVZ2 60 1024 1067 1135 1284 1370 1454 1567 1667
110,9 2 inner drawers
1 pullout
1 fixed shelf
76,0 1 inner drawer

Max. loading 20 kg per pullout / drawer.

Storage unit CH30190KVZX 30 1066 1105 1164 1273 1345 1417 1503 1639
36,25 1 top hinged door CH45190KVZX 45 1184 1226 1297 1417 1498 1580 1673 1823
1 fixed shelf
1 large capacity pullout with front panel
5 adjustable wire baskets with glass bottoms

Max. loading 15 kg per basket.

150,65
VZ-premium equipment MPVZ30P5 110
Frame inside faced in carcase style MPVZ45P5 153
5 adjustable shelves with glass sides

Tall utility unit CH45190HW L/R 45 549 578 646 726 821 916 1007 1099
1 door strapped together with CH50190HW L/R 50 558 600 663 788 863 939 1061 1156
original recessed handle CH60190HW L/R 60 591 635 701 853 935 1017 1130 1233
1 fixed shelf (depth 41.7 cm)
1 adjustable function shelf with railing
110,9
(depth 31 cm)
1 hose holder and 3 clamping hooks
2 adjustable shelves (depth 28 cm)
76,0

Diagram shows L

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

46.02 1/2022
 Price group
Tall units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Package vertical shelf HWV 55
1 centre panel next to hinged side,
on two-door cupboards left
Shelf height 160 cm
Shelf width 18.4 cm
Installed in tall utility unit

Available from cupboard height 190 cm and from

cupboard width 50 cm.
Combination with package waste depot possible.

Package waste depot HWWD 111

1 frame with lid for waste bags
at side opposite hinged side,
on two-door cupboards right
1 cloth bag

Combination with package vertical shelf from cupboard

width 50 cm possible.

Package drinks crates storage HW60GA2 77

2 racks for drinks crates made of steel tubing
for fitting in crockery- or utility unit
on site

When used in the utility unit, function shelf, hose rack

and clamping hook are dispensed with in favour of an
adjustable shelf.

Niche door CH30190N L/R 30 410 442 483 565 629 693 785 856
1 door strapped together with original CH45190N L/R 45 436 458 514 591 675 757 839 914
recessed handle and attached plinth CH50190N L/R 50 443 474 527 631 721 809 904 985
no rear panel CH60190N L/R 60 461 492 556 664 761 857 978 1066
110,9

no floor

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
76,0

Diagram shows L

Divided niche door CANNT46 52

Divided over front height 46.25 cm
with recessed handle

Price group
Housing units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit CHG601906K L/R 60 779 835 905 991 1135 1280 1453 1562
36,25 1 top hinged door
3,5 1 recessed handle 3.5 cm Modular parts list
1 blender 3.5 cm CHGM60190
3,5 1 appliance niche 57-60 cm CMO6036K
1 blender CMGN6075B
1 recessed handle 3.5 cm CMU6083BT
1 door
76,0
2 adjustable shelves
Diagram shows L
For ovens.

Housing unit CHG6019011DKZ 60 831 886 952 1026 1156 1285 1460 1567
36,25
1 top hinged door
3,5
1 recessed handle 3.5 cm
1 blender 3.5 cm
1 appliance double niche 96-108 cm
1 blender
3,5 1 recessed handle 3.5 cm
1 pullout
46,25

For microwave (built-in trim kit will be necessary)

and oven or for fridge.

1/2022 46.03
 Price group
Housing units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit CHGT6019010 L/R 60 613 652 722 811 942 1074 1206 1290
1 door for appliance niche 103 cm
1 recessed handle 3.5 cm with integral ventilation
1 door CHGTI6019010 L/R 60 613 652 722 811 942 1074 1206 1290
2 adjustable shelves
110,9
Modular parts list
For integrated fridge or freezer. CHGM60190
CMGT60114
76,0
CMU6076T
Diagram shows L

Housing unit CHGT6019018 L/R 60 517 566 650 766 845 925 1020 1088
1 door strapped together for
appliance niche 178 cm with integral ventilation
or CHGTI6019018 L/R 60 517 566 650 766 845 925 1020 1088
2 doors for appliance niche 178 cm
110,9
1 support hinge SSCH Modular parts list
when the front projects more than 26 cm CHGM60190
from the appliance CMGT60190
76,0
Not available in IOS-C, IOS-M-C
Diagram shows L Special handle solution see page 10.10.
For integrated fridge and freezer.

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

Price group
Elevated dishwashers
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Dishwasher support CTGSU6046Z 60 442 456 459 499 546 594 634 691
Carcase height 36.5 cm
1 pullout with 46 cm high front panel
and chamfered edge at the bottom
46,25 for opening
1 drip tray

No recessed handle / horizontal joint 0.25 cm.

IOS-C and IOS-M-C only possible with 0.8 cm joint!

Dishwasher-front Module height 75 cm

for fully integrated dishwasher, Appliance height 82 cm
height 82 or 87 cm. CGFV6075 60 125 130 166 203 240 280 338 367

Please state appliance model on order! Module height 80 cm

Side panel or fixing essential e.g. Appliance height 87 cm
panels or cupboards. CGFV6081 60 125 130 166 203 240 280 338 367

Dishwasher-Top cupboard CHGA6064 L/R 60 356 368 394 425 480 535 594 646
1 door CHGA6069 L/R 60 370 383 407 439 496 551 613 669
2 adjustable shelves
1 recessed handle 3.5 cm

Side panel or fixing essential e.g. panels

or tall units.

Diagram shows L

46.04 1/2022
 Surface style
Tall shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 190.65 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit Shelf unit depth 36.2 cm
6 adjustable shelves HR3019036 10-30 672 705 771 969 - 1075 1237 1000
HR6019036 30-60 726 769 847 1050 - 1172 1345 1089
Widths in mm grid variably available. HR9019036 60-90 780 833 923 1131 - 1269 1453 1177
Please state desired width.
Shelf unit depth 58.2 cm
HR30190 10-30 728 762 835 1048 - 1163 1335 1079
HR60190 30-60 781 826 914 1131 - 1264 1450 1172
HR90190 60-90 834 890 993 1214 - 1365 1565 1265

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.

Surface style
Tall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 190.65 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit, Shelf unit depth 36.2 cm
thick 2.8 cm H3R3019036 10-30 740 773 839 1037 1090 1143 1305 1078
Back panel with circumferential shadow joint H3R6019036 30-60 794 837 915 1118 1180 1241 1413 1166
4 shelves H3R9019036 60-90 848 901 991 1199 1269 1339 1521 1254

Shelf unit interior colour = shelf unit exterior colour. Shelf unit depth 58.2 cm
Widths in mm grid variably available. H3R30190 10-30 796 830 903 1116 1174 1231 1403 1159
Please state desired width. H3R60190 30-60 849 895 982 1200 1266 1332 1518 1249
Available without extra charge for free standing H3R90190 60-90 902 960 1061 1284 1359 1433 1633 1340
planning, optional without back panel with visible
edges at the rear. Please state on order.

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 190.65 cm
Side depth 34 cm FS19034 L/R 34 0 0 129 186 267 335 176
Side depth 46 cm FS19046 L/R 46 0 0 149 217 314 392 208
Side depth 56 cm FS19056 L/R 56 0 0 149 217 314 392 208
Side depth 61 cm FS19061 L/R 61 0 0 172 250 360 451 238
Side depth 66 cm FS19066 L/R 66 0 0 172 250 360 451 238
Side depth 76 cm FS19076 L/R 76 0 0 182 264 382 479 252
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

1/2022 46.05
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side with .
depth increase
Carcase height 190.65 cm
Side depth up to 34 cm FSUEL19034 L/R 34 92 92 221 278 359 427 268
Side depth up to 46 cm FSUEL19046 L/R 46 92 92 241 309 406 484 300
Side depth up to 58 cm FSUEL19058 L/R 58 92 92 241 309 406 484 300
Side depth up to 63 cm FSUEL19063 L/R 63 92 92 264 342 452 543 330
Side depth up to 68 cm FSUEL19068 L/R 68 146 146 318 396 506 597 384
Side depth up to 76 cm FSUEL19076 L/R 76 146 146 328 410 528 625 398
Diagram shows R

Leading edge as carcase exterior side.

Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit end panel Front line 80 cm
Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) CHW519058 L/R 5 507 531 600 672 718 764 813 868
Width 5 cm
Divided over front height 76.0 cm
110,9 with recessed handle

Please state the relevant L/R.

76,0 The end panel width is always 5 cm.

Diagram shows L

Tall unit end panel Front line 80 cm

Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) CHW519058Z2 L/R 5 584 609 676 749 795 842 889 950
Width 5 cm
Divided over front height 46.25 and 76.0 cm
110,9 with recessed handle
26,25
Please state the relevant L/R.
46,25 The end panel width is always 5 cm.

Diagram shows L

Tall unit end panel Front line 154 cm

Front finish Depth up to 62.5 cm
36,25 wall-bound solution (one-sided) CHW519058X L/R 5 507 531 600 672 718 764 813 868
Width 5 cm
Divided over front height 150.65 cm
with recessed handle

Please state the relevant L/R.

150,65 The end panel width is always 5 cm.

Diagram shows L

Tall unit panel Basic type

with side shelf unit area Front line 80 cm
1 fixed front at the front Depth up to 62.5 cm
with side frame in front colour CHW1519058R L/R 15 692 721 766 858 941 1021 1107 1207
110,9 2 shelves
1 recessed handle at the front and side, Extra charge interior
above front height 76.0 cm MPK/KH/KG 0
76,0 1 fixed front at the front MPFF/PF/VM 212
with side frame in front colour MPFS/ME 309
Diagram shows R 1 shelf MPFG 498
Always state interior style, MPH 417
possible colours see chapter 11!
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
VALAIS-C
Without plinth!
The plinth end finishes at the last cupboard.

46.06 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 190.65 cm
Front finish CHP20190 L/R 20 95 102 111 117 129 143 148 160

Front finish blenders are manufactured with a maximum

20 cm width.

190,4

Diagram shows L

Tall unit corner blender 90° Carcase height 190.65 cm

Front finish CHPE190 10 194 218 229 240 270 295 304 333
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
190,4 from l to r on order.

4
4

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 190.65 cm

Front finish CHPEW190 10 201 223 235 242 273 298 307 336
Freely selectable angle up to max. 270°
Cupboard width 10 cm:
(Programme BOSSA-C permitted up to 180°)
Not available in IOS-C, IOS-M-C
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width

190,4 Flush with front.

Please state rear length (inside measurement)
3 from l to r on order.
3

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided blender .
Divided over front height 46.25 cm CANBT46 39
with recessed handle

Divided over front height 76.0 cm CANBT80 39

with recessed handle

Divided over front height 150.65 cm CANBT150 39

with recessed handle

Suitable for blenders.

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

1/2022 46.07
 Surface style
Support panels with plinth Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MC H
Support panel with plinth CHWSP19056 L/R 56 209 209 417 549 605 660 753 586
for blender CHWSP19066 L/R 66 229 229 479 631 691 750 853 672
Thickness 1.6 cm
prepared for connection to
tall unit blenders with
recessed handle milling

Only as accessory type for blenders CHP ..,

not available loose!
For use next to appliances or an open niche.
Visible side facing the appliance or the open niche,
Diagram shows R
please state left/right version.

Support panel with plinth up to

Thickness 1.6 cm HWS19058 L/R 63 182 182 391 524 581 638 731 556
both sides finished HWS19068 L/R 70 207 207 441 593 661 729 834 640

Please state required depth.

Please state whether placed L/R and plinth height.
Fit plinth return (7 mm) on site.
Plinth height 1.5 cm larger for floor adjustment.

Diagram shows R

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 190.65 cm
flush with carcase HSB20190 20 53 55 68 87 94 101 118 81

Price group
Rear panels
Front finish

Neutral

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 80 cm
in variable sizes RWF190 392 455 554 669 845 1020 1164 1308
110,9
Height up to 190.4 cm
Max. width 120 cm Not available in IOS-C, IOS-M-C
without recessed handle
with loose plinth
79,25

Minimum charged 0.5 metres.

Rear panel in Front line 80 cm

front finish RWF30190 30 203 224 266 307 399 489 551 627
in fixed front sizes RWF45190 45 216 240 296 353 443 530 601 681
without recessed handle RWF50190 50 218 251 307 371 468 567 646 728
110,9
with loose plinth RWF60190 60 231 275 326 398 515 631 712 798
For carcase height 190.65 cm old RW .. 190

79,25

46.08 1/2022
CONTINO
Tall units, carcase height 203.9 cm

CARCASE LINE 80

Tall units 47. 01-04

Housing units 47. 04-05

Elevated dishwashers 47. 06

Tall shelf units 47. 06-07

Visible carcase sides 47. 07

End panels 47. 08

Blenders 47. 09

Support panels with plinth 47. 10

Blenders 47. 10

Rear panels 47. 10

CONTINO

203.9 cm
Tall units

47.

1/2022 47.
 CONTINO
Tall units, carcase height 203.9 cm
T: Cupboard depth cm

Function cupboards Housing units Elevated dishwashers Shelves

47.01 T: 36 / 48 / 58 cm 47.03 T: 58 cm 47.04 T: 58 cm 47.06 T: 58 cm 47.06 T: 36 / 58 cm

CH 30 204 CH 30 204 VZZIS2 CHG 60 204 6 CTGSU 60 46 Z HR 30 204
CH 45 204 CH 45 204 VZZIS2 49,5
3,5
HR 60 204
CH 50 204 HR 90 204
124,15 CH 60 204 124,15 3,5

46,25

76,0 76,0 76,0

47.01 47.03 47.04 47.06 47.07

T: 36 / 48 / 58 cm T: 58 cm T: 58 cm CGFV 60 75 T: 36 / 58 cm
CH 90 204 CH 30 204 VZX 26,25 CHG 60 204 9 K CGFV 60 81 H3R 30 204
CH 120 204 49,5 CH 45 204 VZX H3R 60 204
H3R 90 204
124,15

3,5
76,0

150,65 76,0

47.01 T: 36 / 48 / 58 cm 47.03 T: 58 cm 47.04 T: 58 cm 47.06 T: 58 cm

CH 30 204 X CH 45 204 HW 26,25 CHG 60 204 9 KZ CHGA 60 78
49,5 CH 45 204 X CH 50 204 HW CHGA 60 83
CH 50 204 X CH 60 204 HW
CH 60 204 X 124,15 3,5

150,65 76,0 76,0

47.01 47.04 47.05

T: 36 / 48 / 58 cm CH 30 204 N T: 58 cm
CH 90 204 X CH 45 204 N CHGT 60 204 14
49,5

CH 50 204 N 49,5 CHGTI 60 204 14

CH 60 204 N
124,15
150,65

76,0

150,65

47.01 T: 58 cm 47.05 T: 58 cm
CH 30 204 ZIZ CHGT 60 204 10D7
CH 45 204 ZIZ
CH 50 204 ZIZ
124,15 CH 60 204 ZIZ 112,25

76,0 87,9

47.01 T: 36 / 48 / 58 cm 47.05 T: 58 cm
CH 30 204 Z2 CHGT 60 204 18
CH 45 204 Z2 CHGTI 60 204 18
CH 50 204 Z2
124,15 CH 60 204 Z2 124,15
26,25

46,25 76,0

47.02 T: 58 cm
CH 30 204 ZIZ3
CH 45 204 ZIZ3
CH 50 204 ZIZ3
124,15 CH 60 204 ZIZ3

76,0

47.02 T: 36 / 48 / 58 cm
CH 30 204 IZ4
CH 45 204 IZ4
CH 50 204 IZ4
124,15 CH 60 204 IZ4

76,0

47.02 T: 36 / 48 / 58 cm
CH 90 204 IZ4
124,15
76,0

47.02 T: 36 / 48 / 58 cm
CH 30 204 IZ4X
49,5 CH 45 204 IZ4X
CH 50 204 IZ4X
CH 60 204 IZ4X

150,65

47.02 T: 36 / 48 / 58 cm
CH 90 204 IZ4X
49,5
CONTINO

203.9 cm
Tall units

150,65

47.03 T: 36 / 48 / 58 cm
47. CH 30 204 GVZ2
CH 45 204 GVZ2
CH 50 204 GVZ2
124,15 CH 60 204 GVZ2

76,0

47. 1/2022
 Price group
Tall units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit CH30204 L/R 30 535 562 620 706 787 866 960 1046
1 door CH45204 L/R 45 557 588 664 756 846 938 1039 1132
3 adjustable shelves CH50204 L/R 50 568 610 679 805 885 965 1096 1194
1 fixed shelf CH60204 L/R 60 603 651 726 878 962 1047 1170 1276
1 door
124,15 2 adjustable shelves

76,0

Diagram shows L

Storage unit CH90204 90 948 998 1129 1285 1438 1589 1766 1925
2 doors CH120204 120 1293 1345 1532 1695 1914 2132 2362 2575
3 adjustable shelves
1 fixed shelf
124,15

2 doors
2 adjustable shelves

With 120 cm width shelves 2.8 cm thick.

76,0

The cupboard has knock down fittings and

can be dismantled for access.

Storage unit CH30204X L/R 30 535 562 620 706 787 866 960 1046
1 door CH45204X L/R 45 557 588 664 756 846 938 1039 1132
49,5 1 adjustable shelf CH50204X L/R 50 568 610 679 805 885 965 1096 1194
1 fixed shelf CH60204X L/R 60 603 651 726 878 962 1047 1170 1276
1 door
4 adjustable shelves

150,65

Diagram shows L

Storage unit CH90204X 90 948 998 1129 1285 1438 1589 1766 1925
2 doors
49,5

1 adjustable shelf
1 fixed shelf
2 doors
4 adjustable shelves
150,65

The cupboard has knock down fittings and

can be dismantled for access.

Tall storage unit CH30204ZIZ L/R 30 707 726 808 865 968 1072 1144 1246
1 door CH45204ZIZ L/R 45 723 752 828 919 1012 1103 1205 1313
3 adjustable shelves CH50204ZIZ L/R 50 736 780 849 974 1055 1133 1267 1380
1 fixed shelf CH60204ZIZ L/R 60 774 823 898 1050 1133 1218 1342 1464
1 pullout
124,15 1 inner pullout

76,0

Diagram shows L

Tall storage unit CH30204Z2 L/R 30 738 769 830 916 1002 1088 1185 1291
1 door CH45204Z2 L/R 45 769 801 881 974 1070 1166 1272 1387
3 adjustable shelves CH50204Z2 L/R 50 783 829 901 1029 1114 1197 1333 1452
1 fixed shelf CH60204Z2 L/R 60 822 873 950 1104 1192 1282 1409 1534
2 pullouts
124,15
26,25

46,25

Diagram shows L

1/2022 47.01
 Price group
Tall units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Tall storage unit CH30204ZIZ3 L/R 30 1141 1160 1243 1303 1407 1509 1581 1723
1 door CH45204ZIZ3 L/R 45 1147 1180 1254 1348 1439 1529 1631 1777
2 adjustable shelves CH50204ZIZ3 L/R 50 1154 1197 1267 1393 1472 1551 1680 1831
2 inner pullouts CH60204ZIZ3 L/R 60 1184 1229 1305 1454 1541 1626 1750 1907
1 fixed shelf
124,15 1 pullout
1 inner pullout

76,0
Exchange wide angle hinge ANIGE 0
Diagram shows L through standard hinge, with spacer strip

Tall storage unit CH30204IZ4 L/R 30 1141 1160 1243 1303 1407 1509 1581 1723
1 door CH45204IZ4 L/R 45 1147 1180 1254 1348 1439 1529 1631 1777
2 adjustable shelves CH50204IZ4 L/R 50 1154 1197 1267 1393 1472 1551 1680 1831
2 inner pullouts CH60204IZ4 L/R 60 1184 1229 1305 1454 1541 1626 1750 1907
1 fixed shelf
124,15 1 door
2 inner pullouts

76,0
Exchange wide angle hinge ANIGE 0
Diagram shows L through standard hinge, with spacer strip

Tall storage unit CH90204IZ4 90 1541 1591 1722 1881 2032 2184 2361 2574
2 doors
2 adjustable shelves
2 inner pullouts
124,15

1 fixed shelf
2 doors
2 inner pullouts
76,0

The cupboard has knock down fittings and

can be dismantled for access.

Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Tall storage unit CH30204IZ4X L/R 30 1111 1132 1215 1276 1379 1482 1552 1693
1 door CH45204IZ4X L/R 45 1117 1149 1224 1318 1410 1500 1600 1744
49,5 1 adjustable shelf CH50204IZ4X L/R 50 1124 1167 1235 1361 1440 1519 1649 1798
1 fixed shelf CH60204IZ4X L/R 60 1153 1199 1275 1423 1509 1594 1720 1875
1 door
4 inner pullouts

150,65 Exchange wide angle hinge ANIGE 0

through standard hinge, with spacer strip
Diagram shows L

Tall storage unit CH90204IZ4X 90 1510 1562 1692 1851 2003 2154 2330 2538
2 doors
49,5

1 adjustable shelf
1 fixed shelf
2 doors
4 inner pullouts

The cupboard has knock down fittings and

150,65

can be dismantled for access.

Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

47.02 1/2022
 Price group
Tall units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Pharmacy tall unit CH30204GVZ2 30 940 968 1026 1112 1192 1272 1365 1452
1 pullout with pullout and CH45204GVZ2 45 992 1023 1098 1190 1280 1372 1473 1567
drawer connection CH50204GVZ2 50 1012 1055 1124 1250 1330 1409 1541 1639
1 fixed shelf CH60204GVZ2 60 1033 1082 1156 1308 1392 1478 1680 1797
2 inner drawers
124,15 1 pullout
1 fixed shelf
1 inner drawer
76,0
Max. loading 20 kg per pullout / drawer.

Storage unit CH30204VZZIS2 30 1172 1225 1315 1433 1506 1579 1648 1797
1 large capacity pullout with front panel CH45204VZZIS2 45 1278 1338 1441 1568 1647 1726 1806 1969
3 adjustable wire baskets with glass bottoms
1 fixed shelf
1 pullout
124,15 2 inner drawers
2 loose baskets

76,0 Max. loading 15 kg per basket.

VZ-premium equipment MPVZ30P3 80

Frame inside faced in carcase style MPVZ45P3 109
3 adjustable shelves with glass sides

Storage unit CH30204VZX L/R 30 1103 1156 1246 1363 1437 1509 1580 1722
1 door CH45204VZX L/R 45 1207 1268 1369 1496 1574 1653 1735 1891
49,5 1 adjustable shelf
1 fixed shelf
1 large capacity pullout with front panel
5 adjustable wire baskets with glass bottoms

Max. loading 15 kg per basket.

150,65

Diagram shows L
VZ-premium equipment MPVZ30P5 110
Frame inside faced in carcase style MPVZ45P5 153
5 adjustable shelves with glass sides

Tall utility unit CH45204HW L/R 45 566 594 668 751 846 941 1045 1139
1 door strapped together with CH50204HW L/R 50 574 619 688 811 890 970 1102 1200
original recessed handle CH60204HW L/R 60 607 652 733 879 966 1051 1174 1279
1 adjustable shelf
1 fixed shelf (depth 41.7 cm)
124,15 1 adjustable function shelf with railing
(depth 31 cm)
1 hose holder and 3 clamping hooks
76,0 2 adjustable shelves (depth 28 cm)

Diagram shows L

Package vertical shelf HWV 55

1 centre panel next to hinged side,
on two-door cupboards left
Shelf height 160 cm
Shelf width 18.4 cm
Installed in tall utility unit

Available from cupboard height 190 cm and from

cupboard width 50 cm.
Combination with package waste depot possible.

Package waste depot HWWD 111

1 frame with lid for waste bags
at side opposite hinged side,
on two-door cupboards right
1 cloth bag

Combination with package vertical shelf from cupboard

width 50 cm possible.

1/2022 47.03
 Price group
Tall units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Package drinks crates storage HW60GA2 77
2 racks for drinks crates made of steel tubing
for fitting in crockery- or utility unit
on site

When used in the utility unit, function shelf, hose rack

and clamping hook are dispensed with in favour of an
adjustable shelf.

Niche door CH30204N L/R 30 421 461 495 581 650 720 815 889
1 door strapped together with original CH45204N L/R 45 449 477 523 609 697 784 870 949
recessed handle and attached plinth CH50204N L/R 50 455 493 539 646 741 837 934 1018
no rear panel CH60204N L/R 60 470 511 568 680 783 886 1008 1100
124,15

no floor

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
76,0

Diagram shows L

Divided niche door CANNT46 52

Divided over front height 46.25 cm
with recessed handle

Price group
Housing units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit CHG602046 L/R 60 779 839 910 1003 1153 1303 1460 1569
1 door
49,5 1 adjustable shelf Modular parts list
3,5 1 recessed handle 3.5 cm CHGM60204
1 blender 3.5 cm CMO6050T
3,5 1 appliance niche 57-60 cm CMGN6075B
1 blender CMU6083BT
1 recessed handle 3.5 cm
76,0 1 door
2 adjustable shelves
Diagram shows L
For ovens.

Housing unit CHG602049K L/R 60 632 666 720 790 912 1028 1175 1258
26,25 1 top hinged door with „sesame-closure“
1 appliance niche 82-95 cm Modular parts list
1 blender CHGM60204
1 recessed handle 3.5 cm CMO6027KS
3,5 1 door CMGN6097
2 adjustable shelves CMU6083BT

76,0 „Sesame-closure“ see page 10.10.

For double oven or for microwave
Diagram shows L (built-in trim kit will be necessary)
and oven or for fridge.

Housing unit CHG602049KZ L/R 60 715 750 797 868 986 1098 1247 1336
26,25 1 top hinged door with „sesame-closure“
1 appliance niche 82-95 cm Modular parts list
1 blender CHGM60204
1 recessed handle 3.5 cm CMO6027KS
3,5 1 pullout CMGN6097
CMU6083BZ
„Sesame-closure“ see page 10.10.
76,0 For double oven or for microwave
(built-in trim kit will be necessary)
Diagram shows L and oven or for fridge.

47.04 1/2022
 Price group
Housing units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit CHGT6020414 L/R 60 592 635 711 798 933 1069 1160 1240
1 door
49,5 1 adjustable shelf with integral ventilation
1 recessed handle 3.5 cm CHGTI6020414 L/R 60 592 635 711 798 933 1069 1160 1240
1 door for appliance niche 140 cm
Modular parts list
For integrated fridge and freezer. CHGM60204
CMO6050T
150,65 CMGT60154

Diagram shows L

Housing unit CHGT6020410D7 L/R 60 558 593 671 771 903 1030 1186 1266
1 door for box shelf and
appliance niche 103 cm Modular parts list
1 recessed handle 3.5 cm CHGM60204
1 door for appliance niche 72 cm CMGT60114
112,25 CMGT6091
For integrated fridge and freezer.

87,9

Diagram shows L

Housing unit CHGT6020418 L/R 60 539 590 682 798 880 962 1066 1138
1 door strapped together for
appliance niche 178 cm with integral ventilation
or CHGTI6020418 L/R 60 539 590 682 798 880 962 1066 1138
2 doors for appliance niche 178 cm
124,15 1 support hinge SSCH Modular parts list
when the front projects more than 26 cm CHGM60204
from the appliance CMGT60204
76,0 Not available in IOS-C, IOS-M-C
Special handle solution see page 10.10.
Diagram shows L For integrated fridge and freezer.

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

1/2022 47.05
 Price group
Elevated dishwashers
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Dishwasher support CTGSU6046Z 60 442 456 459 499 546 594 634 691
Carcase height 36.5 cm
1 pullout with 46 cm high front panel
and chamfered edge at the bottom
46,25 for opening
1 drip tray

No recessed handle / horizontal joint 0.25 cm.

IOS-C and IOS-M-C only possible with 0.8 cm joint!

Dishwasher-front Module height 75 cm

for fully integrated dishwasher, Appliance height 82 cm
height 82 or 87 cm. CGFV6075 60 125 130 166 203 240 280 338 367

Please state appliance model on order! Module height 80 cm

Side panel or fixing essential e.g. Appliance height 87 cm
panels or cupboards. CGFV6081 60 125 130 166 203 240 280 338 367

Dishwasher-Top cupboard CHGA6078 L/R 60 370 383 407 439 496 551 613 669
1 door CHGA6083 L/R 60 384 397 423 454 511 568 633 690
2 adjustable shelves
1 recessed handle 3.5 cm

Side panel or fixing essential e.g. panels

or tall units.

Surface style
Tall shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 203.9 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit Shelf unit depth 36.2 cm
6 adjustable shelves HR3020436 10-30 722 757 828 1043 - 1156 1330 1074
HR6020436 30-60 775 820 907 1122 - 1255 1437 1162
Widths in mm grid variably available. HR9020436 60-90 828 883 986 1201 - 1354 1544 1249
Please state desired width.
Shelf unit depth 58.2 cm
HR30204 10-30 778 818 892 1123 - 1246 1430 1158
HR60204 30-60 836 885 974 1211 - 1352 1551 1251
HR90204 60-90 894 952 1056 1299 - 1458 1672 1345

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.

47.06 1/2022
 Surface style
Tall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 203.9 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit, Shelf unit depth 36.2 cm
thick 2.8 cm H3R3020436 10-30 790 825 897 1111 1168 1224 1398 1153
Back panel with circumferential shadow joint H3R6020436 30-60 843 888 976 1190 1257 1323 1506 1239
4 shelves H3R9020436 60-90 896 951 1055 1269 1346 1422 1614 1326

Shelf unit interior colour = shelf unit exterior colour. Shelf unit depth 58.2 cm
Widths in mm grid variably available. H3R30204 10-30 846 886 960 1191 1253 1315 1498 1235
Please state desired width. H3R60204 30-60 904 953 1042 1280 1350 1420 1620 1331
Available without extra charge for free standing H3R90204 60-90 962 1020 1124 1369 1447 1525 1742 1427
planning, optional without back panel with visible
edges at the rear. Please state on order.

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 203.9 cm
Side depth 34 cm FS20434 L/R 34 0 0 137 197 270 338 177
Side depth 46 cm FS20446 L/R 46 0 0 159 230 356 446 234
Side depth 56 cm FS20456 L/R 56 0 0 159 230 356 446 234
Side depth 61 cm FS20461 L/R 61 0 0 184 265 410 514 271
Side depth 66 cm FS20466 L/R 66 0 0 184 265 410 514 271
Side depth 76 cm FS20476 L/R 76 0 0 194 281 435 544 285
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 203.9 cm
Side depth up to 34 cm FSUEL20434 L/R 34 92 92 229 289 362 430 269
Side depth up to 46 cm FSUEL20446 L/R 46 92 92 251 322 448 538 326
Side depth up to 58 cm FSUEL20458 L/R 58 92 92 251 322 448 538 326
Side depth up to 63 cm FSUEL20463 L/R 63 92 92 276 357 502 606 363
Side depth up to 68 cm FSUEL20468 L/R 68 146 146 330 411 556 660 417
Side depth up to 76 cm FSUEL20476 L/R 76 146 146 340 427 581 690 431
Diagram shows R

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

1/2022 47.07
 Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit end panel Front line 80 cm
Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) CHW520458 L/R 5 543 569 641 716 767 818 868 930
Width 5 cm
Divided over front height 76.0 cm
with recessed handle
124,15
Please state the relevant L/R.
The end panel width is always 5 cm.
76,0

Diagram shows L

Tall unit end panel Front line 80 cm

Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) CHW520458Z2 L/R 5 620 646 719 793 844 894 945 1011
Width 5 cm
Divided over front height 46.25 and 76.0 cm
with recessed handle
124,15
26,25 Please state the relevant L/R.
The end panel width is always 5 cm.
46,25

Diagram shows L

Tall unit end panel Front line 154 cm

Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) CHW520458X L/R 5 543 569 641 716 767 818 868 930
49,5 Width 5 cm
Divided over front height 150.65 cm
with recessed handle

Please state the relevant L/R.

The end panel width is always 5 cm.
150,65

Diagram shows L

Tall unit panel Basic type

with side shelf unit area Front line 80 cm
1 fixed front at the front Depth up to 62.5 cm
with side frame in front colour CHW1520458R L/R 15 720 748 797 893 977 1062 1150 1253
2 shelves
124,15 1 recessed handle at the front and side, Extra charge interior
above front height 76.0 cm MPK/KH/KG 0
1 fixed front at the front MPFF/PF/VM 212
76,0 with side frame in front colour MPFS/ME 309
Diagram shows R
1 shelf MPFG 498
Always state interior style, MPH 417
possible colours see chapter 11!
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
VALAIS-C
Without plinth!
The plinth end finishes at the last cupboard.

47.08 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 203.9 cm
Front finish CHP20204 L/R 20 100 114 119 127 142 158 161 175

Front finish blenders are manufactured with a maximum

20 cm width.

203,65

Diagram shows L

Tall unit corner blender 90° Carcase height 203.9 cm

Front finish CHPE204 10 211 232 248 268 298 330 341 371
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
203,65 from l to r on order.

4
4

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 203.9 cm

Front finish CHPEW204 10 216 238 256 271 302 338 343 374
Freely selectable angle up to max. 270°
Not available in IOS-C, IOS-M-C
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width

Flush with front.

203,65
Please state rear length (inside measurement)
from l to r on order.
3
3

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided blender .
Divided over front height 46.25 cm CANBT46 39
with recessed handle

Divided over front height 76.0 cm CANBT80 39

with recessed handle

Divided over front height 150.65 cm CANBT150 39

with recessed handle

Suitable for blenders.

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

1/2022 47.09
 Surface style
Support panels with plinth Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MC H
Support panel with plinth CHWSP20456 L/R 56 222 222 444 585 645 704 804 626
for blender CHWSP20466 L/R 66 243 243 510 673 737 801 911 718
Thickness 1.6 cm
prepared for connection to
tall unit blenders with
recessed handle milling

Only as accessory type for blenders CHP ..,

not available loose!
For use next to appliances or an open niche.
Visible side facing the appliance or the open niche,
Diagram shows R
please state left/right version.

Support panel with plinth up to

Thickness 1.6 cm HWS20458 L/R 63 195 195 418 560 621 682 782 596
both sides finished HWS20468 L/R 70 221 221 472 635 708 780 892 686

Please state required depth.

Please state whether placed L/R and plinth height.
Fit plinth return (7 mm) on site.
Plinth height 1.5 cm larger for floor adjustment.

Diagram shows R

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 203.9 cm
flush with carcase HSB20204 20 58 60 70 90 98 105 123 83

Price group
Rear panels
Front finish
Neutral

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 80 cm
in variable sizes RWF204 424 489 610 728 902 1075 1229 1379
Height up to 203.65 cm
124,15 Not available in IOS-C, IOS-M-C
Max. width 120 cm
without recessed handle
with loose plinth
79,25
Minimum charged 0.5 metres.

Rear panel in Front line 80 cm

front finish RWF30204 30 219 239 290 330 420 512 581 659
in fixed front sizes RWF45204 45 231 259 323 383 470 560 641 721
without recessed handle RWF50204 50 235 272 339 403 501 598 683 766
with loose plinth RWF60204 60 246 292 360 434 550 667 753 842
124,15
For carcase height 203.9 cm old RW .. 204

79,25

47.10 1/2022
CONTINO
Tall units, carcase height 217.15 cm

CARCASE LINE 80

Tall units 48. 01-04

Housing units 48. 05

Elevated dishwashers 48. 06

Tall shelf units 48. 06-07

Visible carcase sides 48. 07

End panels 48. 08

Blenders 48. 09

Support panels with plinth 48. 10

Blenders 48. 10

Rear panels 48. 10

217.15 cm
CONTINO
Tall units

48.

1/2022 48.
 CONTINO
Tall units, carcase height 217.15 cm
T: Cupboard depth cm

Function cupboards Housing units Elevated dishwashers Shelves

48.01 T: 36 / 48 / 58 cm 48.03 T: 58 cm 48.05 T: 58 cm 48.06 T: 58 cm 48.06 T: 36 / 58 cm

CH 30 217 CH 30 217 VZZIS2 CHG 60 217 6 CTGSU 60 46 Z HR 30 217
CH 45 217 CH 45 217 VZZIS2 62,75 HR 60 217
CH 50 217 3,5
HR 90 217
137,4
CH 60 217 137,4 3,5

46,25

76,0 76,0 76,0

48.01 48.03 48.05 48.06 48.07

T: 36 / 48 / 58 cm T: 58 cm T: 58 cm CGFV 60 75 T: 36 / 58 cm
CH 90 217 CH 30 217 VZX CHG 60 217 9 Z CGFV 60 81 H3R 30 217
CH 120 217 62,75 CH 45 217 VZX 49,5 H3R 60 217
H3R 90 217
137,4

3,5
76,0

150,65 76,0

48.01 T: 36 / 48 / 58 cm 48.03 T: 58 cm 48.05 T: 58 cm 48.06 T: 58 cm

CH 30 217 X CH 45 217 HW CHGT 60 217 12 CHGA 60 91
62,75 CH 45 217 X CH 50 217 HW CHGTI 60 217 12
CH 50 217 X CH 60 217 HW
CH 60 217 X 137,4 137,4

150,65 76,0 76,0

48.01 48.04 48.05 48.06

T: 36 / 48 / 58 cm CH 30 217 N T: 58 cm T: 58 cm
CH 90 217 X CH 45 217 N CHGT 60 217 14 CHGA 60 96
62,75

CH 50 217 N 62,75
CH 60 217 N
137,4
150,65

76,0

150,65

48.01 T: 58 cm 48.05 T: 58 cm
CH 30 217 ZIZ 26,25 CHGT 60 217 18 K
CH 45 217 ZIZ CHGTI 60 217 18 K
CH 50 217 ZIZ
137,4
CH 60 217 ZIZ 110,9

76,0 76,0

48.01 T: 36 / 48 / 58 cm
CH 30 217 Z2
CH 45 217 Z2
CH 50 217 Z2
137,4
CH 60 217 Z2
26,25

46,25

48.02 T: 58 cm
CH 30 217 ZIZ3
CH 45 217 ZIZ3
CH 50 217 ZIZ3
137,4
CH 60 217 ZIZ3

76,0

48.02 T: 36 / 48 / 58 cm
CH 30 217 IZ4
CH 45 217 IZ4
CH 50 217 IZ4
137,4
CH 60 217 IZ4

76,0

48.02 T: 36 / 48 / 58 cm
CH 90 217 IZ4
137,4
76,0

48.02 T: 36 / 48 / 58 cm
CH 30 217 IZ4X
62,75 CH 45 217 IZ4X
CH 50 217 IZ4X
CH 60 217 IZ4X

150,65

48.02 T: 36 / 48 / 58 cm
CH 90 217 IZ4X
62,75
150,65

48.03 T: 36 / 48 / 58 cm
CH 30 217 GVZ2
CH 45 217 GVZ2
CH 50 217 GVZ2
137,4 CH 60 217 GVZ2

76,0
217.15 cm
CONTINO
Tall units

48.

48. 1/2022
 Price group
Tall units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Storage unit CH30217 L/R 30 618 655 738 849 917 986 1059 1155
1 door CH45217 L/R 45 656 698 797 915 992 1066 1146 1249
4 adjustable shelves CH50217 L/R 50 667 724 814 952 1033 1115 1208 1317
1 fixed shelf CH60217 L/R 60 691 756 856 1014 1112 1207 1297 1413
1 door
2 adjustable shelves
137,4

76,0

Diagram shows L

Storage unit CH90217 90 1113 1189 1356 1559 1686 1813 1977 2155
2 doors CH120217 120 1533 1622 1855 2103 2260 2417 2656 2898
4 adjustable shelves
1 fixed shelf
2 doors
137,4

2 adjustable shelves

With 120 cm width shelves 2.8 cm thick.

The cupboard has knock down fittings and
76,0

can be dismantled for access.

Storage unit CH30217X L/R 30 618 655 738 849 917 986 1059 1155
1 door CH45217X L/R 45 656 698 797 915 992 1066 1146 1249
2 adjustable shelves CH50217X L/R 50 667 724 814 952 1033 1115 1208 1317
62,75
1 fixed shelf CH60217X L/R 60 691 756 856 1014 1112 1207 1297 1413
1 door
4 adjustable shelves

150,65

Diagram shows L

Storage unit CH90217X 90 1113 1189 1356 1559 1686 1813 1977 2155
2 doors
62,75

2 adjustable shelves
1 fixed shelf
2 doors
4 adjustable shelves

The cupboard has knock down fittings and

150,65

can be dismantled for access.

Tall storage unit CH30217ZIZ L/R 30 805 832 939 1042 1107 1177 1244 1355
1 door CH45217ZIZ L/R 45 821 862 962 1081 1155 1229 1311 1428
4 adjustable shelves CH50217ZIZ L/R 50 837 893 983 1121 1203 1284 1378 1502
1 fixed shelf CH60217ZIZ L/R 60 862 929 1029 1186 1283 1379 1469 1600
1 pullout
1 inner pullout
137,4

76,0

Diagram shows L

Tall storage unit CH30217Z2 L/R 30 824 859 949 1061 1133 1207 1284 1400
1 door CH45217Z2 L/R 45 866 912 1014 1134 1214 1294 1379 1503
4 adjustable shelves CH50217Z2 L/R 50 884 943 1034 1176 1261 1348 1444 1574
1 fixed shelf CH60217Z2 L/R 60 910 976 1081 1240 1341 1442 1534 1674
2 pullouts

137,4
26,25

46,25

Diagram shows L

1/2022 48.01
 Price group
Tall units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Tall storage unit CH30217ZIZ3 L/R 30 1241 1271 1381 1477 1546 1615 1683 1833
1 door CH45217ZIZ3 L/R 45 1247 1290 1391 1507 1583 1658 1739 1895
3 adjustable shelves CH50217ZIZ3 L/R 50 1253 1309 1399 1538 1620 1702 1795 1957
2 inner pullouts CH60217ZIZ3 L/R 60 1271 1334 1439 1592 1690 1788 1878 2046
1 fixed shelf
1 pullout
137,4
1 inner pullout

76,0 Exchange wide angle hinge ANIGE 0

through standard hinge, with spacer strip
Diagram shows L

Tall storage unit CH30217IZ4 L/R 30 1241 1271 1381 1477 1546 1615 1683 1833
1 door CH45217IZ4 L/R 45 1247 1290 1391 1507 1583 1658 1739 1895
3 adjustable shelves CH50217IZ4 L/R 50 1253 1309 1399 1538 1620 1702 1795 1957
2 inner pullouts CH60217IZ4 L/R 60 1271 1334 1439 1592 1690 1788 1878 2046
1 fixed shelf
1 door
137,4
2 inner pullouts

76,0 Exchange wide angle hinge ANIGE 0

through standard hinge, with spacer strip
Diagram shows L

Tall storage unit CH90217IZ4 90 1706 1785 1951 2152 2280 2407 2623 2859
2 doors
3 adjustable shelves
2 inner pullouts
1 fixed shelf
137,4

2 doors
2 inner pullouts

The cupboard has knock down fittings and

76,0

can be dismantled for access.

Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Tall storage unit CH30217IZ4X L/R 30 1208 1240 1350 1442 1514 1583 1653 1803
1 door CH45217IZ4X L/R 45 1216 1259 1359 1476 1553 1628 1709 1864
2 adjustable shelves CH50217IZ4X L/R 50 1223 1280 1367 1508 1590 1672 1765 1924
62,75
1 fixed shelf CH60217IZ4X L/R 60 1240 1302 1408 1563 1661 1757 1847 2012
1 door
4 inner pullouts

Exchange wide angle hinge ANIGE 0

150,65 through standard hinge, with spacer strip
Diagram shows L

Tall storage unit CH90217IZ4X 90 1676 1753 1921 2122 2250 2376 2592 2825
2 doors
62,75

2 adjustable shelves
1 fixed shelf
2 doors
4 inner pullouts

The cupboard has knock down fittings and

150,65

can be dismantled for access.

Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

48.02 1/2022
 Price group
Tall units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Pharmacy tall unit CH30217GVZ2 30 984 1021 1104 1215 1283 1352 1425 1521
1 pullout with pullout and CH45217GVZ2 45 1034 1076 1176 1294 1370 1444 1524 1628
drawer connection CH50217GVZ2 50 1056 1113 1203 1341 1422 1503 1596 1706
1 fixed shelf CH60217GVZ2 60 1074 1139 1240 1398 1495 1590 1680 1797
2 inner drawers
137,4 1 pullout
1 fixed shelf
1 inner drawer
76,0
Max. loading 20 kg per pullout / drawer.

Storage unit CH30217VZZIS2 30 1235 1286 1379 1501 1575 1649 1727 1881
1 large capacity pullout with front panel CH45217VZZIS2 45 1342 1400 1506 1636 1717 1798 1885 2055
4 adjustable wire baskets with glass bottoms
1 fixed shelf
1 pullout
2 inner drawers
137,4 2 loose baskets

Max. loading 15 kg per basket.

76,0

VZ-premium equipment MPVZ30P4 95

Frame inside faced in carcase style MPVZ45P4 131
4 adjustable shelves with glass sides

Storage unit CH30217VZX L/R 30 1165 1216 1309 1432 1507 1581 1656 1806
1 door CH45217VZX L/R 45 1270 1328 1435 1563 1645 1726 1813 1975
2 adjustable shelves
62,75
1 fixed shelf
1 large capacity pullout with front panel
5 adjustable wire baskets with glass bottoms

Max. loading 15 kg per basket.

150,65

Diagram shows L
VZ-premium equipment MPVZ30P5 110
Frame inside faced in carcase style MPVZ45P5 153
5 adjustable shelves with glass sides

Tall utility unit CH45217HW L/R 45 658 701 802 918 995 1071 1153 1257
1 door strapped together with CH50217HW L/R 50 674 728 815 951 1036 1122 1215 1326
original recessed handle CH60217HW L/R 60 695 758 862 1027 1119 1212 1300 1417
2 adjustable shelves
1 fixed shelf (depth 41.7 cm)
1 adjustable function shelf with railing
137,4
(depth 31 cm)
1 hose holder and 3 clamping hooks
2 adjustable shelves (depth 28 cm)
76,0

Diagram shows L

Package vertical shelf HWV 55

1 centre panel next to hinged side,
on two-door cupboards left
Shelf height 160 cm
Shelf width 18.4 cm
Installed in tall utility unit

Available from cupboard height 190 cm and from

cupboard width 50 cm.
Combination with package waste depot possible.

Package waste depot HWWD 111

1 frame with lid for waste bags
at side opposite hinged side,
on two-door cupboards right
1 cloth bag

Combination with package vertical shelf from cupboard

width 50 cm possible.

1/2022 48.03
 Price group
Tall units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Package drinks crates storage HW60GA2 77
2 racks for drinks crates made of steel tubing
for fitting in crockery- or utility unit
on site

When used in the utility unit, function shelf, hose rack

and clamping hook are dispensed with in favour of an
adjustable shelf.

Niche door CH30217N L/R 30 432 479 506 598 673 748 845 921
1 door strapped together with original CH45217N L/R 45 459 496 535 626 720 813 900 980
recessed handle and attached plinth CH50217N L/R 50 464 513 549 665 765 865 965 1051
no rear panel CH60217N L/R 60 481 528 578 696 805 913 1038 1131
no floor
137,4

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
76,0

Diagram shows L

Divided niche door CANNT46 52

Divided over front height 46.25 cm
with recessed handle

48.04 1/2022
 Price group
Housing units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Housing unit CHG602176 L/R 60 822 875 949 1045 1201 1354 1528 1643
1 door
2 adjustable shelves Modular parts list
62,75
3,5
1 recessed handle 3.5 cm CHGM60217
1 blender 3.5 cm CMO6063T
3,5
1 appliance niche 57-60 cm CMGN6075B
1 blender CMU6083BT
1 recessed handle 3.5 cm
1 door
76,0 2 adjustable shelves
Diagram shows L
For ovens.

Housing unit CHG602179Z L/R 60 719 752 805 877 1001 1120 1278 1367
1 door with „sesame-closure“
49,5 1 adjustable shelf Modular parts list
1 appliance niche 82-95 cm CHGM60217
1 blender CMO6040TS
1 recessed handle 3.5 cm CMGN6097
3,5
1 pullout CMU6083BZ

„Sesame-closure“ see page 10.10.

76,0 For double oven or for microwave
(built-in trim kit will be necessary)
Diagram shows L
and oven or for fridge.

Housing unit CHGT6021712 L/R 60 651 689 767 862 1007 1151 1265 1354
1 door for box shelf and
appliance niche 122 cm with integral ventilation
1 recessed handle 3.5 cm CHGTI6021712 L/R 60 651 689 767 862 1007 1151 1265 1354
1 door
2 adjustable shelves Modular parts list
137,4 CHGM60217
For integrated fridge or freezer. CMGT60141
CMU6076T
76,0

Diagram shows L

Housing unit CHGT6021714 L/R 60 635 671 750 840 981 1120 1228 1314
1 door
2 adjustable shelves Modular parts list
62,75
1 recessed handle 3.5 cm CHGM60217
1 door for appliance niche 140 cm CMO6063T
CMGT60154
For integrated fridge and freezer.

150,65

Diagram shows L

Housing unit CHGT6021718K L/R 60 627 685 781 915 1025 1134 1273 1363
26,25 1 top hinged door with „sesame-closure“
1 door strapped together for with integral ventilation
appliance niche 178 cm CHGTI6021718K L/R 60 627 685 781 915 1025 1134 1273 1363
or
Not available in IOS-C, IOS-M-C
2 doors for appliance niche 178 cm
110,9 1 support hinge SSCH
when the front projects more than 26 cm
from the appliance
76,0
Special top hinged door and special handle solution
Diagram shows L
see page 10.10.
For integrated fridge and freezer.

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

1/2022 48.05
 Price group
Elevated dishwashers
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Dishwasher support CTGSU6046Z 60 442 456 459 499 546 594 634 691
Carcase height 36.5 cm
1 pullout with 46 cm high front panel
and chamfered edge at the bottom
46,25 for opening
1 drip tray

No recessed handle / horizontal joint 0.25 cm.

IOS-C and IOS-M-C only possible with 0.8 cm joint!

Dishwasher-front Module height 75 cm

for fully integrated dishwasher, Appliance height 82 cm
height 82 or 87 cm. CGFV6075 60 125 130 166 203 240 280 338 367

Please state appliance model on order! Module height 80 cm

Side panel or fixing essential e.g. Appliance height 87 cm
panels or cupboards. CGFV6081 60 125 130 166 203 240 280 338 367

Dishwasher-Top cupboard CHGA6091 L/R 60 384 397 423 454 511 568 633 690
1 door
2 adjustable shelves
1 recessed handle 3.5 cm

Side panel or fixing essential e.g. panels

or tall units.

Diagram shows L

Dishwasher-Top cupboard CHGA6096 L/R 60 409 424 451 482 542 603 675 736
1 door
3 adjustable shelves
1 recessed handle 3.5 cm

Side panel or fixing essential e.g. panels

or tall units.

Surface style
Tall shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 217.15 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit Shelf unit depth 36.2 cm
7 adjustable shelves HR3021736 10-30 770 806 883 1109 - 1229 1411 1174
HR6021736 30-60 825 873 965 1196 - 1336 1533 1269
Widths in mm grid variably available. HR9021736 60-90 880 940 1047 1283 - 1443 1655 1364
Please state desired width.
Shelf unit depth 58.2 cm
HR30217 10-30 829 873 954 1200 - 1332 1530 1269
HR60217 30-60 889 940 1039 1291 - 1441 1655 1369
HR90217 60-90 949 1007 1124 1382 - 1550 1780 1469

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.

48.06 1/2022
 Surface style
Tall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 217.15 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit, Shelf unit depth 36.2 cm
thick 2.8 cm H3R3021736 10-30 838 874 951 1177 1237 1297 1479 1251
Back panel with circumferential shadow joint H3R6021736 30-60 893 941 1033 1264 1334 1404 1601 1346
4 shelves H3R9021736 60-90 948 1008 1115 1351 1431 1511 1723 1441

Shelf unit interior colour = shelf unit exterior colour. Shelf unit depth 58.2 cm
Widths in mm grid variably available. H3R30217 10-30 898 941 1022 1268 1334 1400 1598 1346
Please state desired width. H3R60217 30-60 957 1009 1107 1359 1434 1509 1723 1447
Available without extra charge for free standing H3R90217 60-90 1016 1077 1192 1450 1534 1618 1848 1548
planning, optional without back panel with visible
edges at the rear. Please state on order.

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 217.15 cm
Side depth 34 cm FS21734 L/R 34 0 0 146 213 287 357 188
Side depth 46 cm FS21746 L/R 46 0 0 173 251 357 448 236
Side depth 56 cm FS21756 L/R 56 0 0 173 251 357 448 236
Side depth 61 cm FS21761 L/R 61 0 0 197 289 411 516 272
Side depth 66 cm FS21766 L/R 66 0 0 197 289 411 516 272
Side depth 76 cm FS21776 L/R 76 0 0 211 305 436 546 287
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 217.15 cm
Side depth up to 34 cm FSUEL21734 L/R 34 92 92 238 305 379 449 280
Side depth up to 46 cm FSUEL21746 L/R 46 92 92 265 343 449 540 328
Side depth up to 58 cm FSUEL21758 L/R 58 92 92 265 343 449 540 328
Side depth up to 63 cm FSUEL21763 L/R 63 92 92 289 381 503 608 364
Side depth up to 68 cm FSUEL21768 L/R 68 146 146 343 435 557 662 418
Side depth up to 76 cm FSUEL21776 L/R 76 146 146 357 451 582 692 433
Diagram shows R

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

1/2022 48.07
 Price group
End panels

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit end panel Front line 80 cm
Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) CHW521758 L/R 5 576 604 680 761 816 869 923 989
Width 5 cm
Divided over front height 76.0 cm
with recessed handle
137,4
Please state the relevant L/R.
The end panel width is always 5 cm.
76,0

Diagram shows L

Tall unit end panel Front line 80 cm

Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) CHW521758Z2 L/R 5 653 681 759 839 892 947 1001 1070
Width 5 cm
Divided over front height 46.25 and 76.0 cm
with recessed handle
137,4
Please state the relevant L/R.
26,25
The end panel width is always 5 cm.
46,25

Diagram shows L

Tall unit end panel Front line 154 cm

Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) CHW521758X L/R 5 576 604 680 761 816 869 923 989
Width 5 cm
62,75
Divided over front height 150.65 cm
with recessed handle

Please state the relevant L/R.

The end panel width is always 5 cm.
150,65

Diagram shows L

Tall unit panel Basic type

with side shelf unit area Front line 80 cm
1 fixed front at the front Depth up to 62.5 cm
with side frame in front colour CHW1521758R L/R 15 746 774 825 926 1013 1099 1192 1300
3 shelves
1 recessed handle at the front and side, Extra charge interior
137,4
above front height 76.0 cm MPK/KH/KG 0
1 fixed front at the front MPFF/PF/VM 212
with side frame in front colour MPFS/ME 309
76,0
1 shelf MPFG 498
Diagram shows R Always state interior style, MPH 417
possible colours see chapter 11!
Not available in ALURO-C, BOSSA-C, CONCRETE-C, IOS-C, IOS-M-C, SOLID-C, STEEL-C, STONE-C,
VALAIS-C
Without plinth!
The plinth end finishes at the last cupboard.

48.08 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 217.15 cm
Front finish CHP20217 L/R 20 115 127 131 143 164 182 189 208

Front finish blenders are manufactured with a maximum

20 cm width.

216,9

Diagram shows L

Tall unit corner blender 90° Carcase height 217.15 cm

Front finish CHPE217 10 221 246 259 283 323 360 370 403
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.
216,9

4
4

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 217.15 cm

Front finish CHPEW217 10 236 263 277 297 336 374 385 418
Freely selectable angle up to max. 270°
Not available in IOS-C, IOS-M-C
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width

Flush with front.

216,9 Please state rear length (inside measurement)
from l to r on order.
3
3

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided blender .
Divided over front height 46.25 cm CANBT46 39
with recessed handle

Divided over front height 76.0 cm CANBT80 39

with recessed handle

Divided over front height 150.65 cm CANBT150 39

with recessed handle

Suitable for blenders.

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

1/2022 48.09
 Surface style
Support panels with plinth Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MC H
Support panel with plinth CHWSP21756 L/R 56 233 233 469 618 682 745 851 663
for blender CHWSP21766 L/R 66 256 256 540 711 780 848 965 760
Thickness 1.6 cm
prepared for connection to
tall unit blenders with
recessed handle milling

Only as accessory type for blenders CHP ..,

not available loose!
For use next to appliances or an open niche.
Visible side facing the appliance or the open niche,
Diagram shows R
please state left/right version.

Support panel with plinth up to

Thickness 1.6 cm HWS21758 L/R 63 206 206 443 593 658 723 829 633
both sides finished HWS21768 L/R 70 234 234 502 673 750 827 946 728

Please state required depth.

Please state whether placed L/R and plinth height.
Fit plinth return (7 mm) on site.
Plinth height 1.5 cm larger for floor adjustment.

Diagram shows R

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 217.15 cm
flush with carcase HSB20217 20 62 68 77 102 110 117 139 96

Price group
Rear panels
Front finish
Neutral

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 80 cm
in variable sizes RWF217 505 574 678 857 1064 1269 1430 1596
Height up to 216.9 cm
137,4 Max. width 120 cm Not available in IOS-C, IOS-M-C
without recessed handle
with loose plinth
79,25
Minimum charged 0.5 metres.

Rear panel in Front line 80 cm

front finish RWF30217 30 260 284 326 396 501 606 675 765
in fixed front sizes RWF45217 45 277 306 367 452 556 662 739 830
without recessed handle RWF50217 50 280 320 377 476 591 704 795 887
with loose plinth RWF60217 60 294 346 410 517 651 784 874 973
137,4 For carcase height 217.15 cm old RW .. 217

79,25

48.10 1/2022
CONTINO
Modular housing units / Top cupboards

CARCASE LINE 80

Modular housing units - Planning tips 49. 01

Basic units for modular housing units - Carcase heights 154.15 / 190.65 / 203.9 / 217.15 cm, carcase depth 56 cm 49. 02

Modules Below - open below appliance niche 49. 02

Modules Below - below appliance niche with door 49. 03

Modules Below - Appliance niche with door, open below appliance niche 49. 03

Modules Appliance niche (open) - below touch opening 49. 04

Modules Appliance niche (open) - with recessed handle and blender 49. 05

Modules Appliance niche with door - Modular housing units 49. 06

Modules Above for recessed handle - Modules heights 27, 36, 40, 50, 53, 63, 66, 80 and 93 cm 49. 07

Modules Above with touch opening - Modules heights 27, 40, 53, 66, 80 and 93 cm 49. 08

Tall unit top cupboards - Carcase height 26.5 / 39.75 / 53.0 cm, carcase depth 56 cm 49. 09

Visible carcase sides - Modular housing units 49. 10

Blenders - Modular housing units 49. 11-12

Blenders - Modular housing units 49. 12

Modular tall units /

Top cupboards

1/2022 49.
49.
 CONTINO
Modular housing units / Top cupboards
T: Cupboard depth cm
H: Cupboard height cm

Basic units Modules Below Modules Appliance niche Modules Above

49.02 49.02-49.03 49.04 49.07-49.08

T: 58 cm H: 83 cm CMGN 60 ... CMO 60 66 T
H: 154 cm
CMU 60 83 BS2Z
CHGM 60 154 13
CHGM 76 154 13

H: 190 cm 46
CHGM 60 190
CHGM 76 190
H: 204 cm
CHGM 60 204 49.05
CMGN 60 ... B
CHGM 76 204
H: 217 cm
CHGM 60 217
H: 217 cm
CHGM 76 217

Top cupboards
49.09 T: 36 / 48 / 58 cm 49.09 T: 36 / 48 / 58 cm 49.09 T: 36 / 48 / 58 cm
CHAK 30 27 S CHA 30 40 S CHA 30 53 S
CHAK 45 27 S CHA 45 40 S CHA 45 53 S
CHAK 50 27 S CHA 50 40 S CHA 50 53 S
CHAK 60 27 S CHA 60 40 S CHA 60 53 S
CHAK 90 27 S

49.09 T: 36 / 48 / 58 cm 49.09 T: 36 / 48 / 58 cm
CHA 90 40 S CHA 90 53 S

49.09 T: 36 / 48 / 58 cm
CHAK 30 40 S
CHAK 45 40 S
CHAK 50 40 S
CHAK 60 40 S
CHAK 90 40 S
Modular tall units /
Top cupboards

49. 1/2022
49.
Modular housing units - Planning tips

CARCASE LINE 80

1. Choice of basic cupboard The basic cupboard is the building block in kitchen planning and
is described by planning measurements (height, width and depth).
• All tall unit heights are available
• Modular housing units are available with 60 cm and 76 cm width

Relevant to the use, the basic cupboard will be stocked with modules:

Examples:

Modular housing units

CHGM 60 XXX (XXX = cupboard height)

Appliance position below / middle / above

Module above CMO 60 40 ... S CMO 60 53 ... S

CMO...
CMO 60 40 ... CMO 60 53 ... Adjustment through
door/lift-up door

Module niche
CMGT 60 91 CMGN 60 68
e.g. 204 cm

e.g. 204 cm

CMGN / CMGT...
CMGT 60 91 CMGN 60 65 B

Adjustment through
blender/drawer

Grip han
dle 76,0
cm

Module below CMU 60 76 ... CMU 60 83 B...

CMU... Grip h
andle
46,25
CMU 60 76 ... CMU 60 83 B... cm

Summary of the modules = height of basic cupboard

(e.g. 204 cm). Permitted deviation +/- 6 cm
because of the rounded module-planning dimensions.

2. Selecting the modules • Determining height and furnishing of the lower module CMU… or The difference between module-planning dimension CMGN... and
CMGT… Considerations are the ergonomically desired position of the respectively necessary appliance niche, is adjusted with front
the appliance (module height) and the line layout of the adjoining blenders for frame programmes. All other programmes in 2-dimen-
cupboards (front divisions). sional design have a dimensionally adjusted upper front (CMO…)
• Appliance niche. For the respective appliance type and its neces- with front coloured thick-edge end adjacent the appliance.
sary niche, the appropriate module with door CMGT… or without When using 2 appliances, add the thickness of 2 cm for a middle
door CMGN… is selected. shelf according to the construction of the overall niche height. With
• Choice of the upper module CMO…. The upper module is de- appliances that can be stacked or when using bearing rails GUWIN
termined from the rest by the dimensions of the various module the 2 cm addition is not necessary.
heights.
The following applies for planning programmes: based on the cal-
culated remainder of the measurement, the next smaller module
CMO ... must be selected!

All basic cupboards and module variants can be found on the fol-
lowing pages. For further examples of modular configurations, see
standard tall units, chapter 45. to 48.
1/2022 49.01
 Price group
Basic units for modular housing units
Carcase heights 154.15 / 190.65 / 203.9 / 217.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Basic unit Carcase height 154.15 cm
for furnishing with modules CHGM60154 60 239 239 239 239 239 239 239 239
CMU 60 ..., CMGT 60 ..., CMGN 60 ... CHGM76154 76 395 395 395 395 395 395 395 395
and CMO 60 ...
Carcase height 190.65 cm
Please use the 76 cm wide basic unit for the 60 cm wide CHGM60190 60 261 261 261 261 261 261 261 261
modules. These will be adapted to the 76 cm width at the CHGM76190 76 417 417 417 417 417 417 417 417
factory without extra charge.
Width alterations of between 60 cm up to 76 cm are Carcase height 203.9 cm
charged with the price CHGM 76 .. . CHGM60204 60 268 268 268 268 268 268 268 268
CHGM76204 76 424 424 424 424 424 424 424 424

Carcase height 217.15 cm

CHGM60217 60 277 277 277 277 277 277 277 277
CHGM76217 76 433 433 433 433 433 433 433 433

Price group
Modules Below
open below appliance niche

Neutral
Modules heights 53, 63, 83 and 100 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Module Below 53 CMU6053BZ 60 286 305 335 362 414 463 535 582
module height 53 cm
46 1 blender 3.5 cm
1 recessed handle 3.5 cm
1 pullout

Module Below 63 CMU6063SZ 60 382 417 448 495 542 589 705 768
13 module height 63 cm
46 1 drawer
1 recessed handle 3.5 cm
1 pullout

Module Below 83 CMU6083BT L/R 60 234 254 288 327 393 458 528 577
module height 83 cm
1 blender 3.5 cm
76
1 recessed handle 3.5 cm
1 door
Diagram shows L 2 adjustable shelves

Module Below 83 CMU6083BZ 60 317 338 365 405 467 528 600 655
module height 83 cm
1 blender 3.5 cm
76
1 recessed handle 3.5 cm
1 pullout

Module Below 83 CMU6083BZIZ 60 473 493 522 560 622 686 758 827
module height 83 cm
1 blender 3.5 cm
76
1 recessed handle 3.5 cm
1 pullout
1 inner pullout

Module Below 83 CMU6083BZ2 60 513 552 594 655 716 776 935 1020
module height 83 cm
26
1 blender 3.5 cm
46 2 recessed handles, 3.5 cm each
2 pullouts

Module Below 83 CMU6083BS2Z 60 634 680 731 800 948 1093 1194 1302
13 module height 83 cm
13 1 blender 3.5 cm
46 2 recessed handles, 3.5 cm each
2 drawers
1 pullout

Module Below 100 CMU60100BT L/R 60 263 285 320 360 431 500 580 632
module height 100 cm
1 blender 3.5 cm
93 1 recessed handle 3.5 cm
1 door
3 adjustable shelves
Diagram shows L

49.02 1/2022
 Price group
Modules Below
below appliance niche with door

Neutral
Modules heights 46 and 76 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Module Below 46 CMU6046Z 60 266 284 308 339 386 433 500 545
module height 46 cm
46
1 pullout

Module Below 76 CMU6076T L/R 60 203 220 247 285 346 406 472 515
module height 76 cm
76 1 door
2 adjustable shelves
Diagram shows L

Module Below 76 CMU6076Z 60 296 312 342 379 440 499 567 617
module height 76 cm
76 1 pullout

Module Below 76 CMU6076ZIZ 60 426 443 469 510 570 628 747 814
module height 76 cm
76 1 pullout
1 inner pullout

Module Below 76 CMU6076Z2 60 571 616 661 727 794 859 1027 1119
26 module height 76 cm
2 pullouts
46 1 recessed handle 3.5 cm

Module Below 76 CMU6076S2Z 60 692 744 797 875 1027 1179 1286 1402
13 module height 76 cm
13
2 drawers
46 1 recessed handle 3.5 cm
1 pullout

Price group
Modules Below
Appliance niche with door, open below appliance niche

Neutral
Modules heights 83, 100, 108, 118, 131 and 144 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Module Below .
Appliance niche with door
1 blender 3.5 cm
1 recessed handle 3.5 cm

Diagram shows L 1 door 76 cm high in front of CMGT6083B L/R 60 211 238 281 338 400 462 556 606
appliance niche 71 cm
module height 83 cm

1 door 92.5 cm high in front of CMGT60100B L/R 60 233 270 312 375 456 535 624 680
appliance niche 88 cm
module height 100 cm

1 door 101 cm high in front of CMGT60108B L/R 60 239 276 325 386 472 558 639 696
appliance niche 88 cm
module height 108 cm

1 door 110.9 cm high in front of CMGT60118B L/R 60 249 282 333 400 492 582 656 714
appliance niche 103 cm
module height 118 cm

1 door 124.15 cm high in front of CMGT60131B L/R 60 260 288 343 410 509 604 671 732
appliance niche 122 cm
module height 131 cm

1 door 137.4 cm high in front of CMGT60144B L/R 60 267 295 354 423 523 624 687 749
appliance niche 122 cm
module height 144 cm

1/2022 49.03
 Price group
Modules Appliance niche (open)
below touch opening

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance niche .
(open)

1 appliance niche 33 - 43 cm CMGN6045 60 36 41 49 62 87 109 142 154

1 appliance niche 44 - 56 cm CMGN6058 60 36 41 49 62 87 109 142 154

1 appliance niche 57 - 60 cm CMGN6068 60 36 41 49 62 87 109 142 154

1 appliance niche 82 - 95 cm CMGN6097 60 36 41 49 62 87 109 142 154

1 appliance niche 96 - 108 cm CMGN60110 60 36 41 49 62 87 109 142 154

1 appliance niche 109 - 122 cm CMGN60124 60 36 41 49 62 87 109 142 154

Bracket for appliance per pair

1 pair of steel appliance brackets GUWIN 44
6 x 6 cm, 50 cm long
for receiving appliances
For optimising gaps (min. 0.3 cm)
between two appliances.
Installation on site.

2 appliances can be placed in one niche if

GUWIN is ordered in addition.
For the relevant appliance niche MGN.. both
appliance types must be stated.

Module Appliance double niche .

(open)

1 appliance double niche 66 - 76 cm CMGN6084D 60 36 41 49 62 87 109 142 154

1 appliance double niche 82 - 95 cm CMGN6097D 60 36 41 49 62 87 109 142 154

1 appliance double niche 96 - 108 cm CMGN60110D 60 36 41 49 62 87 109 142 154

1 appliance double niche 109 - 122 cm CMGN60124D 60 36 41 49 62 87 109 142 154

49.04 1/2022
 Price group
Modules Appliance niche (open)
with recessed handle and blender

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance niche .
(open)
1 recessed handle 3.5 cm
1 blender 3.5 cm

1 appliance niche 33 - 43 cm CMGN6052B 60 124 142 154 178 211 244 288 314

1 appliance niche 44 - 56 cm CMGN6065B 60 124 142 154 178 211 244 288 314

1 appliance niche 57 - 60 cm CMGN6075B 60 124 142 154 178 211 244 288 314

1 appliance niche 82 - 95 cm CMGN60104B 60 124 142 154 178 211 244 288 314

1 appliance niche 96 - 108 cm CMGN60117B 60 124 142 154 178 211 244 288 314

1 appliance niche 109 - 122 cm CMGN60131B 60 124 142 154 178 211 244 288 314

Bracket for appliance per pair

1 pair of steel appliance brackets GUWIN 44
6 x 6 cm, 50 cm long
for receiving appliances
For optimising gaps (min. 0.3 cm)
between two appliances.
Installation on site.

2 appliances can be placed in one niche if

GUWIN is ordered in addition.
For the relevant appliance niche MGN.. both
appliance types must be stated.

Module Appliance double niche .

(open)
1 recessed handle 3.5 cm
1 blender 3.5 cm

1 appliance double niche 66 - 76 cm CMGN6091DB 60 124 142 154 178 211 244 288 314

1 appliance double niche 82 - 95 cm CMGN60104DB 60 124 142 154 178 211 244 288 314

1 appliance double niche 96 - 108 cm CMGN60117DB 60 124 142 154 178 211 244 288 314

1 appliance double niche 109 - 122 cm CMGN60131DB 60 124 142 154 178 211 244 288 314

1/2022 49.05
 Price group
Modules Appliance niche with door

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Appliance niche with .
door
1 recessed handle 3.5 cm

1 door 88 cm high in front of CMGT6091 L/R 60 132 151 187 232 288 345 428 467
Diagram shows L appliance niche 72 cm

1 door 101 cm high in front of CMGT60104 L/R 60 143 168 204 255 321 385 459 499
appliance niche 88 cm

1 door 110.9 cm high in front of CMGT60114 L/R 60 149 171 214 265 335 407 473 514
appliance niche 103 cm

1 door 115 cm high in front of CMGT60118 L/R 60 159 179 221 276 354 429 487 530
appliance niche 103 cm

1 door 124.15 cm high in front of CMGT60128 L/R 60 159 179 221 276 354 429 487 530
appliance niche 103 cm

1 door 128 cm high in front of CMGT60131 L/R 60 168 185 231 288 369 448 504 549
appliance niche 122 cm

1 door 137.4 cm high in front of CMGT60141 L/R 60 171 192 243 300 384 468 516 562
appliance niche 122 cm

1 door 141 cm high in front of CMGT60144 L/R 60 171 192 243 300 384 468 516 562
appliance niche 122 cm

2 doors or 1 door 150.65 cm high CMGT60154 L/R 60 171 192 243 300 384 468 516 562
in front of appliance niche 140 cm

Module Appliance niche with .

door

2 doors or 1 door strap. together 190 cm CMGT60190 L/R 60 256 305 389 505 584 664 759 827
high in front of appliance niche 178 cm
Not available in IOS-C, IOS-M-C
with special handle
1 support hinge SSCH
when the front projects more than 26 cm
from the appliance
Diagram shows L

2 doors or 1 door strap. together 204 cm CMGT60204 L/R 60 271 322 414 530 612 694 798 870
high in front of appliance niche 178 cm
Not available in IOS-C, IOS-M-C
with special handle
1 support hinge SSCH
when the front projects more than 26 cm
from the appliance

2 doors or 1 door strap. together 217 cm CMGT60217 L/R 60 316 376 477 634 721 807 912 993
high in front of appliance niche 178 cm
Not available in IOS-C, IOS-M-C
with special handle
1 support hinge SSCH
when the front projects more than 26 cm
from the appliance

Support hinge for fridge and freezers ZSSCH 32

with appliance hinge
1 support hinge with base plate
for fitting on site
for additional requirement

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

49.06 1/2022
 Price group
Modules Above for recessed handle
Modules heights 27, 36, 40, 50, 53, 63, 66, 80 and 93 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Above 27 CMO6027K 60 144 160 177 202 240 276 329 359
module height 27 cm
1 top hinged door

Module Above 36 CMO6036K 60 160 178 202 225 270 317 376 410
module height 36 cm
1 top hinged door

Module Above 40 CMO6040T L/R 60 140 154 178 204 250 293 354 384
module height 40 cm
1 door
1 adjustable shelf
Diagram shows L

Module Above 40 CMO6040K 60 173 191 214 239 288 337 390 425
module height 40 cm
1 top hinged door
1 adjustable shelf

Module Above 50 CMO6050T L/R 60 153 175 200 230 281 333 376 410
module height 50 cm
1 door
1 adjustable shelf
Diagram shows L

Module Above 50 CMO6050K 60 189 209 234 265 318 370 410 446
module height 50 cm
1 top hinged door
1 adjustable shelf

Module Above 53 CMO6053T L/R 60 153 175 200 230 281 333 376 410
module height 53 cm
1 door
1 adjustable shelf
Diagram shows L

Module Above 53 CMO6053K 60 189 209 234 265 318 370 410 446
module height 53 cm
1 top hinged door
1 adjustable shelf

Module Above 63 CMO6063T L/R 60 187 202 230 263 320 375 435 475
module height 63 cm
1 door
2 adjustable shelves

Diagram shows L

Module Above 66 CMO6066T L/R 60 187 202 230 263 320 375 435 475
module height 66 cm
1 door
2 adjustable shelves

Diagram shows L

Module Above 80 CMO6080T L/R 60 197 213 244 276 334 393 456 497
module height 80 cm
1 door
2 adjustable shelves

Diagram shows L

Module Above 93 CMO6093T L/R 60 222 243 270 309 370 431 504 549
module height 93 cm
1 door
3 adjustable shelves

Diagram shows L

1/2022 49.07
 Price group
Modules Above with touch opening
Modules heights 27, 40, 53, 66, 80 and 93 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Module Above 27 CMO6027KS 60 94 103 115 133 164 193 237 259
module height 27 cm
1 top hinged door with „sesame-closure“

Module Above 40 CMO6040TS L/R 60 89 96 114 133 170 206 259 281
module height 40 cm
1 door with „sesame-closure“
1 adjustable shelf
Diagram shows L

Module Above 40 CMO6040KS 60 120 130 150 168 205 243 293 318
module height 40 cm
1 top hinged door with „sesame-closure“
1 adjustable shelf

Module Above 53 CMO6053TS L/R 60 103 115 134 159 204 249 279 306
module height 53 cm
1 door with „sesame-closure“
1 adjustable shelf
Diagram shows L

Module Above 53 CMO6053KS 60 136 150 171 193 239 283 316 344
module height 53 cm
1 top hinged door with „sesame-closure“
1 adjustable shelf

Module Above 66 CMO6066TS L/R 60 134 143 164 192 241 288 340 371
module height 66 cm
1 door with „sesame-closure“
2 adjustable shelves

Diagram shows L

Module Above 80 CMO6080TS L/R 60 145 153 179 207 257 307 361 393
module height 80 cm
1 door with „sesame-closure“
2 adjustable shelves

Diagram shows L

Module Above 93 CMO6093TS L/R 60 172 182 207 238 293 344 407 443
module height 93 cm
1 door with „sesame-closure“
3 adjustable shelves

Diagram shows L

49.08 1/2022
 Price group
Tall unit top cupboards
Carcase height 26.5 / 39.75 / 53.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Tall unit top cupboard CHAK3027S 30 173 177 193 208 243 281 303 332
Carcase height 26.5 cm CHAK4527S 45 185 191 207 222 263 302 327 355
1 top hinged door with „sesame-closure“ CHAK5027S 50 188 195 213 229 270 306 336 365
CHAK6027S 60 194 205 221 239 280 317 345 376
No wall fixing. CHAK9027S 90 281 307 331 377 433 489 541 589

Tall unit top cupboard CHA3040S L/R 30 170 175 188 207 242 280 308 338
Carcase height 39.75 cm CHA4540S L/R 45 178 183 203 222 266 306 343 374
1 door with „sesame-closure“ CHA5040S L/R 50 181 190 213 230 280 330 349 382
1 adjustable shelf CHA6040S L/R 60 190 201 223 242 291 338 367 400
Diagram shows L
No wall fixing.

Tall unit top cupboard CHA9040S 90 271 302 332 377 444 509 577 629
Carcase height 39.75 cm
2 doors
(right hand door with touch opening)
1 adjustable shelf

No wall fixing.

Tall unit top cupboard CHAK3040S 30 192 199 214 232 270 303 335 364
Carcase height 39.75 cm CHAK4540S 45 203 209 229 245 290 333 367 400
1 top hinged door with „sesame-closure“ CHAK5040S 50 207 216 237 251 302 353 372 405
1 adjustable shelf CHAK6040S 60 216 227 246 268 313 361 393 428
CHAK9040S 90 297 327 355 419 475 530 601 656
No wall fixing.

Tall unit top cupboard CHA3053S L/R 30 193 203 225 240 270 295 339 368
Carcase height 53.0 cm CHA4553S L/R 45 195 209 229 266 297 331 349 382
1 door with „sesame-closure“ CHA5053S L/R 50 207 215 232 268 318 370 383 416
1 adjustable shelf CHA6053S L/R 60 213 223 240 280 327 372 403 442

Diagram shows L No wall fixing.

Tall unit top cupboard CHA9053S 90 308 325 359 429 469 548 628 685
Carcase height 53.0 cm
2 doors
(right hand door with touch opening)
1 adjustable shelf

No wall fixing.

1/2022 49.09
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 26.5 cm
Side depth 34 cm FS2734 L/R 34 0 0 43 60 90 113 59
Side depth 46 cm FS2746 L/R 46 0 0 52 76 116 145 76
Side depth 56 cm FS2756 L/R 56 0 0 52 76 116 145 76
Side depth 61 cm FS2761 L/R 61 0 0 62 87 134 166 89
Side depth 66 cm FS2766 L/R 66 0 0 62 87 134 166 89
Side depth 76 cm FS2776 L/R 76 0 0 65 93 142 177 93

Carcase height 39.75 cm

Diagram shows R Side depth 34 cm FS4034 L/R 34 0 0 43 63 93 116 60
Side depth 46 cm FS4046 L/R 46 0 0 58 83 122 153 79
Side depth 56 cm FS4056 L/R 56 0 0 58 83 122 153 79
Side depth 61 cm FS4061 L/R 61 0 0 66 97 141 176 92
Side depth 66 cm FS4066 L/R 66 0 0 66 97 141 176 92
Side depth 76 cm FS4076 L/R 76 0 0 70 102 149 186 98

Carcase height 53.0 cm

Side depth 34 cm FS5334 L/R 34 0 0 44 65 93 117 62
Side depth 46 cm FS5346 L/R 46 0 0 65 93 129 161 84
Side depth 56 cm FS5356 L/R 56 0 0 65 93 129 161 84
Side depth 61 cm FS5361 L/R 61 0 0 77 112 158 201 105
Side depth 66 cm FS5366 L/R 66 0 0 77 112 158 201 105
Side depth 76 cm FS5376 L/R 76 0 0 84 122 170 214 110

Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall unit top cupboards FSOL L/R 46 46 - - - - -

Leading edge as carcase exterior side.

Visible carcase side with .

depth increase
Carcase height 26.5 cm
Side depth up to 34 cm FSUEL2734 L/R 34 66 66 109 126 156 179 125
Side depth up to 46 cm FSUEL2746 L/R 46 66 66 118 142 182 211 142
Side depth up to 58 cm FSUEL2758 L/R 58 66 66 118 142 182 211 142
Side depth up to 63 cm FSUEL2763 L/R 63 66 66 128 153 200 232 155
Side depth up to 68 cm FSUEL2768 L/R 68 107 107 169 194 241 273 196
Side depth up to 76 cm FSUEL2776 L/R 76 107 107 172 200 249 284 200

Diagram shows R
Carcase height 39.75 cm
Side depth up to 34 cm FSUEL4034 L/R 34 66 66 109 129 159 182 126
Side depth up to 46 cm FSUEL4046 L/R 46 66 66 124 149 188 219 145
Side depth up to 58 cm FSUEL4058 L/R 58 66 66 124 149 188 219 145
Side depth up to 63 cm FSUEL4063 L/R 63 66 66 132 163 207 242 158
Side depth up to 68 cm FSUEL4068 L/R 68 107 107 173 204 248 283 199
Side depth up to 76 cm FSUEL4076 L/R 76 107 107 177 209 256 293 205

Carcase height 53.0 cm

Side depth up to 34 cm FSUEL5334 L/R 34 66 66 110 131 159 183 128
Side depth up to 46 cm FSUEL5346 L/R 46 66 66 131 159 195 227 150
Side depth up to 58 cm FSUEL5358 L/R 58 66 66 131 159 195 227 150
Side depth up to 63 cm FSUEL5363 L/R 63 66 66 143 178 224 267 171
Side depth up to 68 cm FSUEL5368 L/R 68 107 107 184 219 265 308 212
Side depth up to 76 cm FSUEL5376 L/R 76 107 107 191 229 277 321 217

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“ on page 10.07.

49.10 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Tall unit blender Carcase height 154.15 cm
Front finish with recessed handle above
CHP20154 L/R 20 94 98 103 115 124 132 138 152
Front finish blenders are manufactured with a maximum
20 cm width. Carcase height 190.65 cm
CHP20190 L/R 20 95 102 111 117 129 143 148 160

Carcase height 203.9 cm

CHP20204 L/R 20 100 114 119 127 142 158 161 175
Diagram shows L
Carcase height 217.15 cm
CHP20217 L/R 20 115 127 131 143 164 182 189 208

Carcase height 250 cm

CHP20250 L/R 20 164 204 208 229 251 291 311 314

Wall unit blender Carcase height 26.5 cm

Front finish COP2027 L/R 20 52 53 55 55 60 64 65 70

Carcase height 39.75 cm

COP2040 L/R 20 52 53 56 60 64 67 67 72

Carcase height 53.0 cm

COP2053 L/R 20 52 53 57 65 67 69 70 77

Tall unit corner blender 90° Carcase height 154.15 cm

Front finish with recessed handle above
freely selectable leg measurement CHPE154 10 170 183 204 213 232 249 266 287
from 4 x 4 cm to 10 x 10 cm width
Carcase height 190.65 cm
Flush with front. CHPE190 10 194 218 229 240 270 295 304 333
Please state rear length (inside measurement)
from l to r on order. Carcase height 203.9 cm
CHPE204 10 211 232 248 268 298 330 341 371
4
Carcase height 217.15 cm
CHPE217 10 221 246 259 283 323 360 370 403
4

Carcase height 250 cm

CHPE250 10 247 286 295 325 384 438 446 486

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 154.15 cm

Front finish with recessed handle above
Freely selectable angle up to max. 270° CHPEW154 10 195 216 234 239 266 288 302 331
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from Carcase height 190.65 cm
3 x 3 cm up to 10 x 10 cm width CHPEW190 10 201 223 235 242 273 298 307 336

Flush with front. Carcase height 203.9 cm

Please state rear length (inside measurement) CHPEW204 10 216 238 256 271 302 338 343 374
3 from l to r on order.
Carcase height 217.15 cm
3

CHPEW217 10 236 263 277 297 336 374 385 418

Carcase height 250 cm

CHPEW250 10 288 320 327 365 423 464 490 530
Carcase height 154.15 / 190.65 / 203.9 / 217.15 / 250 cm:
Not available in IOS-C, IOS-M-C

Extra charge CMPHP5 5 24 27 27 27 34 38 39 42

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided blender .
Divided over front height 46.25 cm CANBT46 39
with recessed handle

Divided over front height 76.0 cm CANBT80 39

with recessed handle

Divided over front height 150.65 cm CANBT150 39

with recessed handle

Suitable for blenders.

1/2022 49.11
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
TFA .. Carcase-connection strip ANTFA 26
for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 154.15 cm
flush with carcase HSB20154 20 46 49 53 72 77 82 99 67

Carcase height 190.65 cm

HSB20190 20 53 55 68 87 94 101 118 81

Carcase height 203.9 cm

HSB20204 20 58 60 70 90 98 105 123 83

Carcase height 217.15 cm

HSB20217 20 62 68 77 102 110 117 139 96

Carcase height 230 cm

HSB20230 20 65 71 83 109 117 124 148 102

49.12 1/2022
AVANCE
Tall units with horizontal recessed handles

Carcase height 154,1 cm 50. Chapter

For CARCASE LINE 80

Carcase height 190,65 cm 51. Chapter

Carcase height 203,9 cm 52. Chapter

Carcase height 217,15 cm 53. Chapter

Modular housing units 54. Chapter

Tall units
AVANCE
5.

1/2022 5.
 AVANCE
Tall units with horizontal recessed handles – type logic

Article definition Dimension definition Front definition/

function equipment

Tall unit Width / Height / Depth* VZ large capacity pullout

Z pullout
IS interior drawer

AH 30 204 * VZZIS
AH 30 204 VZZIS * depth only if different from standard 58 cm

Housing unit Width / Height / Niche* Z pullout (1x)

with door in front of recess IZ interior pullout (1x)
Tall units
AVANCE

AHGT 60 204 12 ZIZ

5. AHGT 60 204 12 ZIZ * D double niche
M with lift-up flap (Micro)

Housing unit with recess Width / Height / Niche* Z2 pullout (2x)

AHG 60 204 9D Z2
AHG 60 204 9D Z2 * D double niche
M with lift-up flap (Micro)

Article definition Front definition / function equipment

AH tall unit GVZ pharmacy tall unit

AHA tall unit – top cupboard HW housekeeping tall unit
AHAK tall unit – top cupboard with flap IS interior drawer
AHAW tall end unit with angled door IZ interior pullout
AHM modular tall unit K flap
AHP tall unit blender N niche door
AHPE tall unit corner blender S Sesam
AHPEW tall unit corner blender 135º
S drawer
AH3R tall shelf unit
VZ large capacity pullout
H3R tall shelf unit
X grip handle at 150 cm height
AHW tall unit side panel
ATGSU dishwasher sub-structure Z pullout
AHGA dishwasher top cupboard
AHGM modular housing unit
AHG housing unit with recess
AHGT housing unit with door in front of recess

5. 1/2022
AVANCE

154.15 cm
Tall units, carcase height 154.15 cm

Tall units
AVANCE
50.

CARCASE LINE 80

Tall units 50. 01

Housing units 50. 02-03

Elevated dishwashers 50. 04

End tall units 50. 04

Tall shelf units, thick 2,8 cm 50. 05

Visible carcase sides 50. 05

End panels 50. 06

Blenders 50. 06-07

Support panels with plinth 50. 07

Blenders 50. 07

Rear panels 50. 08

1/2022 50.
154.15 cm AVANCE
Tall units, carcase height 154.15 cm
Tall units
AVANCE

T: Cupboard depth cm

50. Function cupboards Housing units Elevated dishwashers Angle cupboards Shelves

50.01 T: 36 / 48 / 58 cm 50.02 T: 58 cm 50.04 T: 58 cm 50.04 T: 58 cm 50.05 T: 36 / 58 cm

3,5
AH 30 154 AHG 60 154 6 SZIZ ATGSU 60 52 BZ AHAW 30 154 H3R 30 154
AH 45 154 H3R 60 154
AH 50 154 H3R 90 154
AH 60 154 21,0–24,0 3,5

33,0
150,65 62,75 150,65

50.01 50.02 50.04

T: 36 / 48 / 58 cm
3,5
T: 58 cm AGFV 60 75
AH 90 154 AHG 60 154 6 SZ2 AGFV 60 80
AH 120 154
21,0–24,0
26,25
150,65

33,0

50.01 T: 36 / 48 / 58 cm 50.02 T: 58 cm 50.04 T: 58 cm

3,5
AH 30 154 IZ4 AHG 60 154 9 SZ AHGA 60 22 Z
AH 45 154 IZ4 AHGA 60 27 Z
AH 50 154 IZ4
AH 60 154 IZ4
21,0–34,0

150,65 33,0

50.01 T: 36 / 48 / 58 cm 50.02 T: 58 cm
3,5
AH 90 154 IZ4 AHG 60 154 11D Z

3,5–15,5
150,65

33,0

50.01 T: 58 cm 50.02 T: 58 cm
3,5
AH 30 154 VZ AHGT 60 154 4D9
AH 45 154 VZ 3,5–13,5
AHGTI 60 154 4D9

150,65 92,5

50.01 50.03
AH 30 154 N T: 58 cm
AH 45 154 N AHGT 60 154 9 ISZ
AH 50 154 N AHGTI 60 154 9 ISZ
AH 60 154 N
114,15
150,65

33,0

50.03 T: 58 cm
AHGT 60 154 10 Z
AHGTI 60 154 10 Z

114,15

33,0

50.03 T: 58 cm
AHGT 60 154 12 IS
AHGTI 60 154 12 IS

150,65

50.03 T: 58 cm
AHGT 60 154 14
AHGTI 60 154 14

150,65

50. 1/2022
 Price group
Tall units
Carcase height 154.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Storage unit AH30154 L/R 30 491 535 557 624 719 811 870
1 door AH45154 L/R 45 503 548 573 659 756 852 912
4 adjustable shelves AH50154 L/R 50 515 564 588 692 794 895 956
AH60154 L/R 60 542 594 641 732 844 956 1022
Finishing top necessary, see page 81.04
and chapter 71.
150,65

Diagram shows L

Storage unit AH90154 90 843 919 961 1105 1269 1432 1529
2 doors AH120154 120 1144 1246 1280 1479 1693 1908 2038
4 adjustable shelves

With 120 cm width shelves 2.8 cm thick.

Finishing top necessary, see page 81.04
150,65

and chapter 71.

Tall storage unit AH30154IZ4 L/R 30 1043 1056 1081 1178 1270 1360 1392
1 door AH45154IZ4 L/R 45 1056 1083 1108 1217 1317 1417 1448
4 inner pullouts AH50154IZ4 L/R 50 1069 1111 1135 1257 1365 1473 1504
AH60154IZ4 L/R 60 1100 1149 1197 1295 1419 1543 1579
Finishing top necessary, see page 81.04
and chapter 71.
150,65

Diagram shows L
Exchange wide angle hinge ANIGE 0
through standard hinge, with spacer strip

Tall storage unit AH90154IZ4 90 1441 1519 1560 1704 1883 2064 2128
2 doors
4 inner pullouts

Finishing top necessary, see page 81.04

and chapter 71.
150,65

Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Storage unit AH30154VZ 30 1050 1119 1145 1220 1320 1420 1439
1 large capacity pullout with front panel AH45154VZ 45 1153 1223 1263 1349 1459 1570 1589
5 adjustable wire baskets with glass bottoms

Max. loading 15 kg per basket.

Finishing top necessary, see page 81.04
150,65 and chapter 71.

VZ-premium equipment MPVZ30P5 110

Frame inside faced in carcase style MPVZ45P5 153
5 adjustable shelves with glass sides

Niche door AH30154N L/R 30 374 383 414 444 482 521 547
1 door with original recessed handle AH45154N L/R 45 409 417 450 476 518 557 585
and attached plinth AH50154N L/R 50 463 470 499 526 569 608 661
no rear panel AH60154N L/R 60 519 524 547 578 619 661 706
no floor
150,65

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
Finishing top necessary, see page 81.04
Diagram shows L and chapter 71.

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 50.01
 Price group
Housing units
Carcase height 154.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
3,5 Housing unit AHG601546SZIZ 60 1114 1203 1265 1333 1524 1715 1805
1 recessed handle 3.5 cm
1 blender 3.5 cm Modular parts list

21,0–24,0
1 appliance niche 57-60 cm AHGM60154
1 drawer AMGN6078B
1 recessed handle 3.5 cm AMU6080SZIZ
62,75 1 pullout
1 inner pullout

For ovens.
Finishing top necessary, see page 81.04
and chapter 71.

3,5 Housing unit AHG601546SZ2 60 1225 1326 1395 1473 1688 1902 2007
1 recessed handle 3.5 cm
1 blender 3.5 cm Modular parts list

21,0–24,0
1 appliance niche 57-60 cm AHGM60154
1 drawer AMGN6078B
26,25 1 recessed handle 3.5 cm AMU6080SZ2
33,0 1 pullout
1 recessed handle 3.5 cm
1 pullout

For ovens.
Finishing top necessary, see page 81.04
and chapter 71.

3,5 Housing unit AHG601549SZ 60 907 974 1022 1074 1221 1365 1437
1 recessed handle 3.5 cm
1 blender 3.5 cm Modular parts list
1 appliance niche 82-95 cm AHGM60154
1 drawer AMGN60104B
21,0–34,0
1 recessed handle 3.5 cm AMU6050SZ
33,0
1 pullout

For double oven or microwave/oven combination

(built-in trim kit will be necessary) or fridge.
Finishing top necessary, see page 81.04
and chapter 71.
It is necessary to fit ventilator grille into finishing
top of refrigeration housing.

3,5 Housing unit AHG6015411DZ 60 800 855 896 939 1063 1183 1241
1 recessed handle 3.5 cm
1 blender 3.5 cm Modular parts list
1 appliance double niche 96-108 cm AHGM60154
1 blender AMGN60117DB
3,5–15,5
1 recessed handle 3.5 cm AMU6040BZ
33,0 1 pullout

For microwave/oven combination (built-in trim kit

will be necessary).
Finishing top necessary, see page 81.04
and chapter 71.

3,5 Housing unit AHGT601544D9 L/R 60 705 749 788 819 922 1024 1073
1 recessed handle 3.5 cm
3,5–13,5 1 blender 3.5 cm with integral ventilation
1 appliance niche 33-43 cm AHGTI601544D9 L/R 60 705 749 788 819 922 1024 1073
1 blender 3.5 cm
1 recessed handle 3.5 cm Modular parts list
92,5 1 door for appliance niche 88 cm AHGM60154
AMGN6052B
Diagram shows L For microwave (built-in trim kit will be necessary) AMGT60100B
and integrated fridge.
Finishing top necessary, see page 81.04
and chapter 71.

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

50.02 1/2022
 Price group
Housing units
Carcase height 154.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Housing unit AHGT601549ISZ L/R 60 785 835 866 906 1021 1134 1172
1 recessed handle 3.5 cm
1 door for appliance niche 88 cm with integral ventilation
1 inner drawer AHGTI601549ISZ L/R 60 785 835 866 906 1021 1134 1172
1 recessed handle 3.5 cm
114,15 1 pullout
33,0
For integrated fridge or freezer.
Diagram shows L Finishing top necessary, see page 81.04
and chapter 71.
It is necessary to fit ventilator grille into finishing
top of refrigeration housing.

Housing unit AHGT6015410Z L/R 60 721 769 799 843 945 1051 1103
1 recessed handle 3.5 cm
1 door for appliance niche 103 cm with integral ventilation
1 recessed handle 3.5 cm AHGTI6015410Z L/R 60 721 769 799 843 945 1051 1103
1 pullout
114,15 Modular parts list

33,0 For integrated fridge or freezer. AHGM60154

Finishing top necessary, see page 81.04 AMGT60121
Diagram shows L and chapter 71. AMU6033Z
It is necessary to fit ventilator grille into finishing
top of refrigeration housing.

Housing unit AHGT6015412IS L/R 60 605 634 657 678 756 833 846
1 recessed handle 3.5 cm
1 door for appliance niche 122 cm with integral ventilation
1 inner drawer AHGTI6015412IS L/R 60 605 634 657 678 756 833 846

For integrated fridge and freezer.

150,65 Finishing top necessary, see page 81.04
and chapter 71.
Diagram shows L It is necessary to fit ventilator grille into finishing
top of refrigeration housing.

Housing unit AHGT6015414 L/R 60 544 580 597 623 691 757 788
1 recessed handle 3.5 cm
1 door for appliance niche 140 cm with integral ventilation
AHGTI6015414 L/R 60 544 580 597 623 691 757 788
For integrated fridge and freezer.
Finishing top necessary, see page 81.04 Modular parts list
150,65 and chapter 71. AHGM60154
It is necessary to fit ventilator grille into finishing AMGT60154
Diagram shows L top of refrigeration housing.

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

1/2022 50.03
 Price group
Elevated dishwashers
Carcase height 154.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Dishwasher support ATGSU6052BZ 60 474 491 512 584 661 735 744
Carcase height 41.5 cm
1 blender
3,5 1 recessed handle 3.5 cm
33,0 1 pullout with 33.0 cm
high front panel
1 drip tray

Side panel or fixing essential e.g.

panels or cupboards.

Dishwasher-front Module height 75 cm

for fully integrated dishwasher, Appliance height 82 cm
height 82 or 87 cm. AGFV6075 60 170 182 215 223 284 345 376

Please state appliance model on order! Module height 80 cm

Side panel or fixing essential e.g. Appliance height 87 cm
panels or cupboards. AGFV6080 60 175 189 224 231 296 360 396

Dishwasher-Top cupboard AHGA6022Z 60 492 524 545 570 643 718 740
1 recessed handle 3.5 cm AHGA6027Z 60 492 524 545 570 643 718 740
1 pullout
1 recessed handle 3.5 cm

Side panel or fixing essential e.g. panels

or tall units.
Finishing top necessary, see page 81.04
and chapter 71.

Price group
End tall units
Carcase height 154.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
End tall unit Basic type
1 angled door AHAW30154 L/R 30 1603 1712 1778 1867 2094 2318 2415
4 fixed glass shelves
Always state interior style, Extra charge interior
possible colours see chapter 11! MPK/KH/KG 0
MPFF/PF/VM 101
150,65 Finishing top necessary, see page 81.04 MPFS/ME 147
and chapter 71. MPFG 230
Diagram shows L MPH 209
Not available in CONCRETE-A, STEEL-A, STONE-A

LED-Linear-interior lighting For depth 58 cm

1 light with LED-strip AW58LE 236
integrated in the top
Light temperature 4000K, neutral white
1 adapter 240 volt 50 HZ, 24 volt,
40 watt
1 distributor for constant 4000K
1 extension cable 4 pole, 200 cm
1 HSSC sensor switch
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

50.04 1/2022
 Surface style
Tall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 154.15 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit, Shelf unit depth 36.2 cm
thick 2.8 cm H3R3015436 10-30 698 713 783 967 1017 1066 1215 992
Back panel with circumferential shadow joint H3R6015436 30-60 748 773 855 1045 1103 1161 1319 1076
3 shelves H3R9015436 60-90 798 833 927 1123 1190 1256 1423 1161

Shelf unit interior colour = shelf unit exterior colour. Shelf unit depth 58.2 cm
Widths in mm grid variably available. H3R30154 10-30 754 769 846 1047 1101 1154 1313 1071
Please state desired width. H3R60154 30-60 803 831 922 1127 1190 1252 1423 1160
Available without extra charge for free standing H3R90154 60-90 852 893 998 1207 1279 1350 1533 1248
planning, optional without back panel with visible
edges at the rear. Please state on order.
Finishing top necessary, see page 81.04
and chapter 71.

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 154.15 cm
Side depth 34 cm FS15434 L/R 34 0 0 100 144 215 268 139
Side depth 46 cm FS15446 L/R 46 0 0 131 189 267 335 176
Side depth 56 cm FS15456 L/R 56 0 0 131 189 267 335 176
Side depth 61 cm FS15461 L/R 61 0 0 151 218 307 386 204
Side depth 66 cm FS15466 L/R 66 0 0 151 218 307 386 204
Side depth 76 cm FS15476 L/R 76 0 0 159 230 327 409 216
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 154.15 cm
Side depth up to 34 cm FSUEL15434 L/R 34 92 92 192 236 307 360 231
Side depth up to 46 cm FSUEL15446 L/R 46 92 92 223 281 359 427 268
Side depth up to 58 cm FSUEL15458 L/R 58 92 92 223 281 359 427 268
Side depth up to 63 cm FSUEL15463 L/R 63 92 92 243 310 399 478 296
Side depth up to 68 cm FSUEL15468 L/R 68 146 146 297 364 453 532 350
Side depth up to 76 cm FSUEL15476 L/R 76 146 146 305 376 473 555 362
Diagram shows R

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

1/2022 50.05
 Price group
End panels
Width 5 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Tall unit end panel Carcase height 154.15 cm
Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) AHW515458 L/R 5 421 443 500 559 640 721 781
Width 5 cm
with recessed handle above
150,65
Please state the relevant L/R.
The end panel width is always 5 cm.
Diagram shows L

Price group
Blenders

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Tall unit blender Carcase height 154.15 cm
Front finish with recessed handle above
AHP20154 L/R 20 117 123 128 133 154 170 209
Front finish blenders are manufactured with a maximum
20 cm width.
150,65

Diagram shows L

Divided blender .
Divided over front height 33.0 cm AANBT33 39
with recessed handle

Divided over front height 62.75 cm AANBT66 39

with recessed handle

Tall unit corner blender 90° Carcase height 154.15 cm

Front finish with recessed handle above
freely selectable leg measurement AHPE154 10 218 229 247 260 286 311 384
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

150,65 Please state rear length (inside measurement)
from l to r on order.
4
4

Extra charge AMPHP5 5 34 36 36 41 45 49 67

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 154.15 cm

Front finish with recessed handle above
Freely selectable angle up to max. 270° AHPEW154 10 229 243 260 275 300 327 402
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width

150,65 Flush with front.

Please state rear length (inside measurement)
3 from l to r on order.
3

Extra charge AMPHP5 5 34 36 36 41 45 49 67

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided corner blender AANEBT33 61 73 94 110 125 140 196

additional height division 33.0 cm from
bottom edge, recessed handle continuous
with internal mitre

Suitable for 90° corner blenders and

corner blenders.

50.06 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
TFA .. Carcase-connection strip ANTFA 26
for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

Surface style
Support panels with plinth Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MC H
Support panel with plinth AHWSP15456 L/R 56 169 169 331 436 478 520 594 461
for blender AHWSP15466 L/R 66 185 185 379 500 546 591 672 527
Thickness 1.6 cm
prepared for connection to
tall unit blenders with
recessed handle milling

Only as accessory type for blenders AHP ..,

not available loose!
Diagram shows R
For use next to appliances or an open niche.
Visible side facing the appliance or the open niche,
please state left/right version.

Support panel with plinth up to

Thickness 1.6 cm HWS15458 L/R 63 142 142 305 411 455 498 572 431
both sides finished HWS15468 L/R 70 163 163 341 462 516 570 653 495

Please state required depth.

Please state whether placed L/R and plinth height.
Fit plinth return (7 mm) on site.
Plinth height 1.5 cm larger for floor adjustment.
Diagram shows R

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 154.15 cm
flush with carcase HSB20154 20 46 49 53 72 77 82 99 67

1/2022 50.07
 Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front RWF154 326 355 444 541 709 873 999
in variable sizes
Height up to 153.9 cm
Max. width 120 cm
153,9 without recessed handle
with loose plinth

Minimum charged 0.5 metres.

Rear panel in RWF30154 30 181 204 255 311 369 427 477
front finish RWF45154 45 192 222 287 355 414 472 537
in fixed front sizes RWF50154 50 195 226 294 374 434 494 567
without recessed handle RWF60154 60 213 245 321 413 481 550 621
with loose plinth old RW .. 154
for carcase height 154.15 cm
153,9

50.08 1/2022
AVANCE
Tall units, carcase height 190.65 cm

CARCASE LINE 80

190.65 cm
Tall units
AVANCE
Tall units 51. 01-03

Housing units 51. 04

51.
Elevated dishwashers 51. 05

End tall units 51. 05

Tall shelf units, thick 2.8 cm 51. 06

Visible carcase sides 51. 06

End panels 51. 07

Blenders 51. 07-08

Support panels with plinth 51. 09

Blenders 51. 09

Rear panels 51. 09

1/2022 51.
 AVANCE
Tall units, carcase height 190.65 cm
T: Cupboard depth cm

Function cupboards Housing units Elevated dishwashers Angle cupboards Shelves

51.01 T: 36 / 48 / 58 cm 51.04 T: 58 cm 51.05 T: 58 cm 51.05 T: 36 / 58 cm 51.06 T: 36 / 58 cm

36,25
AH 30 190 -
39,25 AHG 60 190 6 KSZIZ ATGSU 60 52 BZ AHAW 30 190 H3R 30 190
AH 45 190 3,5 H3R 60 190
190.65 cm

AH 50 190 H3R 90 190

Tall units

AH 60 190
AVANCE

3,5
124,15 13,0 124,15
33,0
62,75 62,75 62,75

51.01 51.04 51.05

T: 36 / 48 / 58 cm 26,25
T: 58 cm AGFV 60 75
51. AH 90 190
AH 120 190
-
39,25 AHG 60 190 9 K AGFV 60 80
124,15

3,5
62,75

62,75

51.01 T: 36 / 48 / 58 cm 51.04 T: 58 cm 51.05 T: 58 cm

36,25
36,25 AH 30 190 KX -
48,25 AHG 60 190 11D KZ AHGA 60 58
AH 45 190 KX 3,5
AH 50 190 KX
AH 60 190 KX
3,5

150,65 33,0

51.01 T: 36 / 48 / 58 cm 51.04 T: 58 cm 51.05 T: 58 cm

AH 30 190 ZIZ 26,25 AHGT 60 190 9 KZIZ AHGA 60 63
AH 45 190 ZIZ AHGTI 60 190 9 KZIZ
AH 50 190 ZIZ
124,15
AH 60 190 ZIZ 97,65

62,75 62,75

51.01 T: 36 / 48 / 58 cm 51.04 T: 58 cm
AH 30 190 Z2 AHGT 60 190 10 ZIZ
AH 45 190 Z2 AHGTI 60 190 10 ZIZ
AH 50 190 Z2
124,15
AH 60 190 Z2 124,15
26,25

33,0 62,75

51.01 T: 36 / 48 / 58 cm 51.04 T: 58 cm
AH 30 190 ZIZ3 AHGT 60 190 18
AH 45 190 ZIZ3 AHGTI 60 190 18
AH 50 190 ZIZ3
124,15
AH 60 190 ZIZ3 124,15

62,75 62,75

51.02 T: 36 / 48 / 58 cm
AH 30 190 IZ3IS
AH 45 190 IZ3IS
AH 50 190 IZ3IS
124,15
AH 60 190 IZ3IS

62,75

51.02 T: 36 / 48 / 58 cm
AH 90 190 IZ3IS
124,15
62,75

51.02 T: 36 / 48 / 58 cm
36,25 AH 30 190 KIZ4X
AH 45 190 KIZ4X
AH 50 190 KIZ4X
AH 60 190 KIZ4X

150,65

51.02 T: 36 / 48 / 58 cm
AH 30 190 GVZ2
AH 45 190 GVZ2
AH 50 190 GVZ2
124,15
AH 60 190 GVZ2

62,75

51.02 T: 58 cm
36,25 AH 30 190 KVZX
AH 45 190 KVZX

150,65

51.02 T: 58 cm
AH 45 190 HW
AH 50 190 HW
AH 60 190 HW
124,15

62,75

51.03
AH 30 190 N
AH 45 190 N
AH 50 190 N
AH 60 190 N
124,15
62,75

51. 1/2022
 Price group
Tall units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Storage unit AH30190 L/R 30 571 624 669 703 839 974 1051
1 door AH45190 L/R 45 595 649 721 756 900 1043 1124
3 adjustable shelves AH50190 L/R 50 603 659 729 795 933 1069 1153
1 fixed shelf AH60190 L/R 60 648 708 777 864 1012 1158 1248
1 door
124,15 2 adjustable shelves

62,75

Diagram shows L

Storage unit AH90190 90 1028 1124 1247 1309 1555 1798 1939
2 doors AH120190 120 1407 1539 1717 1756 2097 2439 2630
3 adjustable shelves
1 fixed shelf
124,15

2 doors
2 adjustable shelves
62,75

With 120 cm width shelves 2.8 cm thick.

The cupboard has knock down fittings and
can be dismantled for access.

Storage unit AH30190KX L/R 30 583 638 681 716 852 990 1065
36,25 1 top hinged door AH45190KX L/R 45 608 663 733 769 913 1056 1135
1 fixed shelf AH50190KX L/R 50 616 671 742 808 945 1083 1166
1 door AH60190KX L/R 60 662 722 791 879 1026 1173 1261
4 adjustable shelves

150,65

Diagram shows L

Tall storage unit AH30190ZIZ L/R 30 869 963 1031 1101 1227 1358 1421
1 door AH45190ZIZ L/R 45 878 970 1039 1108 1245 1381 1446
3 adjustable shelves AH50190ZIZ L/R 50 886 977 1048 1116 1260 1406 1471
1 fixed shelf AH60190ZIZ L/R 60 933 1029 1102 1172 1335 1499 1572
1 pullout
124,15 1 inner pullout

62,75

Diagram shows L

Tall storage unit AH30190Z2 L/R 30 933 1029 1074 1145 1290 1433 1484
1 door AH45190Z2 L/R 45 955 1056 1126 1199 1352 1503 1558
3 adjustable shelves AH50190Z2 L/R 50 971 1071 1143 1216 1374 1532 1591
1 fixed shelf AH60190Z2 L/R 60 1017 1123 1193 1271 1448 1625 1692
2 pullouts
124,15
26,25

33,0

Diagram shows L

Tall storage unit AH30190ZIZ3 L/R 30 1280 1331 1398 1494 1620 1743 1770
1 door AH45190ZIZ3 L/R 45 1301 1349 1419 1513 1647 1781 1816
2 adjustable shelves AH50190ZIZ3 L/R 50 1322 1367 1439 1532 1674 1816 1861
2 inner pullouts AH60190ZIZ3 L/R 60 1382 1432 1502 1599 1762 1922 1972
1 fixed shelf
124,15 1 pullout
1 inner pullout
62,75

Diagram shows L Exchange wide angle hinge ANIGE 0

through standard hinge, with spacer strip

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

1/2022 51.01
 Price group
Tall units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Tall storage unit AH30190IZ3IS L/R 30 1151 1197 1270 1351 1477 1605 1653
1 door AH45190IZ3IS L/R 45 1174 1220 1291 1373 1509 1645 1697
2 adjustable shelves AH50190IZ3IS L/R 50 1195 1244 1313 1397 1542 1684 1738
2 inner pullouts AH60190IZ3IS L/R 60 1261 1311 1381 1467 1631 1796 1852
1 fixed shelf
124,15 1 door
1 inner drawer
1 inner pullout
62,75

Diagram shows L
Exchange wide angle hinge ANIGE 0
through standard hinge, with spacer strip

Tall storage unit AH90190IZ3IS 90 1531 1584 1705 1818 2059 2300 2429
2 doors
2 adjustable shelves
2 inner pullouts
124,15

1 fixed shelf
2 doors
1 inner drawer
62,75

1 inner pullout

The cupboard has knock down fittings and

can be dismantled for access.

Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Tall storage unit AH30190KIZ4X L/R 30 1133 1178 1245 1320 1453 1585 1632
36,25 1 top hinged door AH45190KIZ4X L/R 45 1151 1197 1268 1348 1485 1622 1673
1 fixed shelf AH50190KIZ4X L/R 50 1170 1218 1290 1374 1516 1660 1714
1 door AH60190KIZ4X L/R 60 1230 1283 1350 1438 1601 1765 1823
4 inner pullouts

Exchange wide angle hinge ANIGE 0

150,65
through standard hinge, with spacer strip
Diagram shows L

Pharmacy tall unit AH30190GVZ2 30 986 1039 1085 1119 1254 1390 1466
1 pullout with pullout and AH45190GVZ2 45 1035 1090 1161 1196 1340 1484 1564
drawer connection AH50190GVZ2 50 1056 1112 1182 1248 1386 1522 1606
1 fixed shelf AH60190GVZ2 60 1088 1148 1216 1304 1452 1598 1687
2 inner drawers
124,15 1 pullout
1 fixed shelf
62,75
1 inner drawer

Max. loading 20 kg per pullout / drawer.

Storage unit AH30190KVZX 30 1169 1229 1274 1355 1484 1614 1654
36,25 1 top hinged door AH45190KVZX 45 1274 1335 1395 1486 1628 1768 1812
1 fixed shelf
1 large capacity pullout with front panel
5 adjustable wire baskets with glass bottoms

Max. loading 15 kg per basket.

150,65
VZ-premium equipment MPVZ30P5 110
Frame inside faced in carcase style MPVZ45P5 153
5 adjustable shelves with glass sides

Tall utility unit AH45190HW L/R 45 649 704 777 811 956 1101 1182
1 door strapped together with AH50190HW L/R 50 656 713 799 834 979 1124 1207
original recessed handle AH60190HW L/R 60 698 760 828 870 1042 1213 1301
1 fixed shelf (depth 41.7 cm)
1 adjustable function shelf with railing
124,15 (depth 31 cm)
1 hose holder and 3 clamping hooks
2 adjustable shelves (depth 28 cm)
62,75

Diagram shows L

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

51.02 1/2022
 Price group
Tall units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Package vertical shelf HWV 55
1 centre panel next to hinged side,
on two-door cupboards left
Shelf height 160 cm
Shelf width 18.4 cm
Installed in tall utility unit

Available from cupboard height 190 cm and from

cupboard width 50 cm.
Combination with package waste depot possible.

Package waste depot HWWD 111

1 frame with lid for waste bags
at side opposite hinged side,
on two-door cupboards right
1 cloth bag

Combination with package vertical shelf from cupboard

width 50 cm possible.

Package drinks crates storage HW60GA2 77

2 racks for drinks crates made of steel tubing
for fitting in crockery- or utility unit
on site

When used in the utility unit, function shelf, hose rack

and clamping hook are dispensed with in favour of an
adjustable shelf.

Niche door AH30190N L/R 30 489 503 559 619 689 757 832
1 door strapped together with original AH45190N L/R 45 513 525 579 640 718 794 868
recessed handle and attached plinth AH50190N L/R 50 521 535 599 656 746 833 908
no rear panel AH60190N L/R 60 570 584 648 704 787 869 918
no floor
124,15

Fixing sides in matching carcase colour.

62,75

Plinth omitted with AN TU 85.

Diagram shows L

1/2022 51.03
 Price group
Housing units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
36,25 Housing unit AHG601906KSZIZ 60 1279 1384 1455 1532 1754 1972 2072
- 1 top hinged door
39,25
3,5 1 blender Modular parts list
1 appliance niche 57-60 cm AHGM60190
1 drawer AMO6036K
13,0 1 pullout AMGN6078B
1 inner pullout AMU6080SZIZ
62,75
For ovens.

26,25 Housing unit AHG601909K L/R 60 773 817 856 897 1004 1116 1170
-
39,25 1 top hinged door with „sesame-closure“
1 appliance niche 82-95 cm Modular parts list
1 blender AHGM60190
1 door AMO6027KS
3,5 2 adjustable shelves AMGN60104B
AMU6063T
„Sesame-closure“ see page 10.17.
62,75
For double oven or for microwave
Diagram shows L (built-in trim kit will be necessary)
and oven or for fridge.

36,25 Housing unit AHG6019011DKZ 60 965 1036 1086 1138 1293 1440 1508
-
48,25 1 top hinged door
3,5 1 blender Modular parts list
1 appliance double niche 96-108 cm AHGM60190
1 blender AMO6036K
1 pullout AMGN60117DB
3,5 AMU6040BZ
For microwave (built-in trim kit will be necessary)
33,0
and oven.

Housing unit AHGT601909KZIZ L/R 60 1013 1086 1137 1194 1356 1518 1603
26,25
1 top hinged door with „sesame-closure“
1 door for appliance niche 88 cm with integral ventilation
1 pullout AHGTI601909KZIZ L/R 60 1013 1086 1137 1194 1356 1518 1603
1 inner pullout
97,65 Modular parts list
„Sesame-closure“ see page 10.17. AHGM60190
For integrated fridge or freezer. AMO6027KS
62,75
AMGT6096
Diagram shows L AMU6063ZIZ

Housing unit AHGT6019010ZIZ L/R 60 915 977 1027 1078 1216 1359 1427
1 door for appliance niche 103 cm
1 pullout with integral ventilation
1 inner pullout AHGTI6019010ZIZ L/R 60 915 977 1027 1078 1216 1359 1427

124,15 For integrated fridge and freezer.

62,75

Diagram shows L

Housing unit AHGT6019018 L/R 60 669 711 736 769 856 942 987
1 door strapped together for
appliance niche 178 cm with integral ventilation
or AHGTI6019018 L/R 60 669 711 736 769 856 942 987
2 doors for appliance niche 178 cm
124,15 1 support hinge SSCH Modular parts list
when the front projects more than 26 cm AHGM60190
from the appliance AMGT60190
62,75

Diagram shows L Special handle solution see page 10.17.

For integrated fridge and freezer.

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

51.04 1/2022
 Price group
Elevated dishwashers
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Dishwasher support ATGSU6052BZ 60 474 491 512 584 661 735 744
Carcase height 41.5 cm
1 blender
3,5 1 recessed handle 3.5 cm
33,0 1 pullout with 33.0 cm
high front panel
1 drip tray

Side panel or fixing essential e.g.

panels or cupboards.

Dishwasher-front Module height 75 cm

for fully integrated dishwasher, Appliance height 82 cm
height 82 or 87 cm. AGFV6075 60 170 182 215 223 284 345 376

Please state appliance model on order! Module height 80 cm

Side panel or fixing essential e.g. Appliance height 87 cm
panels or cupboards. AGFV6080 60 175 189 224 231 296 360 396

Dishwasher-Top cupboard AHGA6058 L/R 60 371 387 393 405 448 486 504
1 door
1 adjustable shelf
1 recessed handle 3.5 cm

Side panel or fixing essential e.g. panels

or tall units.

Diagram shows L

Dishwasher-Top cupboard AHGA6063 L/R 60 385 400 409 424 465 508 526
1 door
2 adjustable shelves
1 recessed handle 3.5 cm

Side panel or fixing essential e.g. panels

or tall units.

Diagram shows L

Price group
End tall units
Carcase height 190.65 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

End tall unit Basic type
1 angled door Cupboard depth 36 cm
3 fixed glass shelves AHAW3019036 L/R 30 1613 1720 1788 1876 2102 2329 2426
1 fixed shelf Carcase depth 56 cm
1 angled door AHAW30190 L/R 30 1690 1805 1878 1968 2208 2447 2547
124,15 2 fixed glass shelves
Always state interior style, Extra charge interior
62,75 possible colours see chapter 11! MPK/KH/KG 0
MPFF/PF/VM 107
Diagram shows L MPFS/ME 156
MPFG 245
MPH 261
Not available in CONCRETE-A, STEEL-A, STONE-A

LED-Linear-interior lighting For depth 36 cm

1 light with LED-strip HAW36LE 212
integrated in the top
1 light with LED-strip For depth 58 cm
integrated in fixed shelf HAW58LE 236
Light temperature 4000K, neutral white
1 adapter 240 volt 50 HZ, 24 volt,
40 watt
1 distributor for constant 4000K
2 extension cables 4 pole, 200 cm
1 HSSC sensor switch
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black
1/2022 51.05
 Surface style
Tall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 190.65 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit, Shelf unit depth 36.2 cm
thick 2.8 cm H3R3019036 10-30 740 773 839 1037 1090 1143 1305 1078
Back panel with circumferential shadow joint H3R6019036 30-60 794 837 915 1118 1180 1241 1413 1166
4 shelves H3R9019036 60-90 848 901 991 1199 1269 1339 1521 1254

Shelf unit interior colour = shelf unit exterior colour. Shelf unit depth 58.2 cm
Widths in mm grid variably available. H3R30190 10-30 796 830 903 1116 1174 1231 1403 1159
Please state desired width. H3R60190 30-60 849 895 982 1200 1266 1332 1518 1249
Available without extra charge for free standing H3R90190 60-90 902 960 1061 1284 1359 1433 1633 1340
planning, optional without back panel with visible
edges at the rear. Please state on order.

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 190.65 cm
Side depth 34 cm FS19034 L/R 34 0 0 129 186 267 335 176
Side depth 46 cm FS19046 L/R 46 0 0 149 217 314 392 208
Side depth 56 cm FS19056 L/R 56 0 0 149 217 314 392 208
Side depth 61 cm FS19061 L/R 61 0 0 172 250 360 451 238
Side depth 66 cm FS19066 L/R 66 0 0 172 250 360 451 238
Side depth 76 cm FS19076 L/R 76 0 0 182 264 382 479 252
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 190.65 cm
Side depth up to 34 cm FSUEL19034 L/R 34 92 92 221 278 359 427 268
Side depth up to 46 cm FSUEL19046 L/R 46 92 92 241 309 406 484 300
Side depth up to 58 cm FSUEL19058 L/R 58 92 92 241 309 406 484 300
Side depth up to 63 cm FSUEL19063 L/R 63 92 92 264 342 452 543 330
Side depth up to 68 cm FSUEL19068 L/R 68 146 146 318 396 506 597 384
Side depth up to 76 cm FSUEL19076 L/R 76 146 146 328 410 528 625 398
Diagram shows R

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

51.06 1/2022
 Price group
End panels
Width 5 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Tall unit end panel Carcase height 190.65 cm
Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) AHW519058 L/R 5 535 560 633 708 807 906 976
Width 5 cm
124,15 Divided over front height 62.75 cm
with recessed handle

62,75 Please state the relevant L/R.

The end panel width is always 5 cm.
Diagram shows L

Tall unit end panel Carcase height 190.65 cm

Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) AHW519058Z2 L/R 5 610 636 708 784 882 981 1052
Width 5 cm
124,15 Divided over front height 33.0 and 62.75 cm
26,25 with recessed handle

33,0 Please state the relevant L/R.

The end panel width is always 5 cm.
Diagram shows L

Tall unit end panel Carcase height 190.65 cm

36,25
Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) AHW519058X L/R 5 535 560 633 708 807 906 976
Width 5 cm
Divided over front height 150.65 cm
with recessed handle

150,65 Please state the relevant L/R.

The end panel width is always 5 cm.
Diagram shows L

Price group
Blenders

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Tall unit blender Carcase height 190.65 cm
Front finish AHP20190 L/R 20 95 102 111 117 129 143 148

Front finish blenders are manufactured with a maximum

20 cm width.

190,4

Diagram shows L

Divided blender .
Divided over front height 33.0 cm AANBT33 39
with recessed handle

Divided over front height 62.75 cm AANBT66 39

with recessed handle

Divided over front height 150.65 cm AANBT150 39

with recessed handle

Suitable for blenders.

1/2022 51.07
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Tall unit corner blender 90° Carcase height 190.65 cm
Front finish AHPE190 10 194 218 229 240 270 295 304
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
190,4 from l to r on order.

4
4

Extra charge AMPHP5 5 34 36 36 41 45 49 67

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 190.65 cm

Front finish AHPEW190 10 201 223 235 242 273 298 307
Freely selectable angle up to max. 270°
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width

Flush with front.

190,4 Please state rear length (inside measurement)
from l to r on order.
3
3

Extra charge AMPHP5 5 34 36 36 41 45 49 67

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided corner blender AANEBT33 61 73 94 110 125 140 196

additional height division 33.0 cm from
bottom edge, recessed handle continuous
with internal mitre

Suitable for 90° corner blenders and

corner blenders.

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

51.08 1/2022
 Surface style
Support panels with plinth Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MC H
Support panel with plinth AHWSP19056 L/R 56 209 209 417 549 605 660 753 586
for blender AHWSP19066 L/R 66 229 229 479 631 691 750 853 672
Thickness 1.6 cm
prepared for connection to
tall unit blenders with
recessed handle milling

Only as accessory type for blenders AHP ..,

not available loose!
For use next to appliances or an open niche.
Visible side facing the appliance or the open niche,
Diagram shows R
please state left/right version.

Support panel with plinth up to

Thickness 1.6 cm HWS19058 L/R 63 182 182 391 524 581 638 731 556
both sides finished HWS19068 L/R 70 207 207 441 593 661 729 834 640

Please state required depth.

Please state whether placed L/R and plinth height.
Fit plinth return (7 mm) on site.
Plinth height 1.5 cm larger for floor adjustment.

Diagram shows R

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 190.65 cm
flush with carcase HSB20190 20 53 55 68 87 94 101 118 81

Price group
Rear panels
Front finish

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 66 cm
in variable sizes RWF190Y 392 455 554 669 845 1020 1164
Height up to 190.4 cm
124,15 Max. width 120 cm
without recessed handle
with loose plinth
66,0

Minimum charged 0.5 metres.

Rear panel in Front line 66 cm

front finish RWF30190Y 30 203 224 266 307 399 489 551
in fixed front sizes RWF45190Y 45 216 240 296 353 443 530 601
without recessed handle RWF50190Y 50 218 251 307 371 468 567 646
with loose plinth RWF60190Y 60 231 275 326 398 515 631 712
124,15 For carcase height 190.65 cm old RW .. 190 Y

66,0

1/2022 51.09
1/2022
AVANCE
Tall units, carcase height 203.9 cm

CARCASE LINE 80

Tall units 52. 01-04

Housing units 52. 04-07

Elevated dishwashers 52. 07

End tall units 52. 08

Tall shelf units, thick 2.8 cm 52. 08

203.9 cm
Tall units
AVANCE
Visible carcase sides 52. 09

End panels 52. 10

52.
Blenders 52. 10-11

Support panels with plinth 52. 12

Blenders 52. 12

Rear panels 52. 12

1/2022 52.
 AVANCE
Tall units, carcase height 203.9 cm
T: Cupboard depth cm

Function cupboards Housing units Elevated dishwashers

52.01 T: 36 / 48 / 58 cm 52.03 T: 36 / 48 / 58 cm 52.04 T: 58 cm 52.06 T: 58 cm 52.07 T: 58 cm

AH 30 204 AH 30 204 GVZ2 49,5
- AHG 60 204 6 SZIZ 26,25 AHGT 60 204 10 KZIZ ATGSU 60 52 BZ
AH 45 204 AH 45 204 GVZ2 52,5
3,5
AH 50 204 AH 50 204 GVZ2
AH 60 204 137,4
AH 60 204 GVZ2 13,0
3,5
137,4 111,15
33,0
62,75 62,75 62,75 62,75

52.01 52.03 52.04 52.06 52.07

T: 36 / 48 / 58 cm T: 58 cm T: 58 cm T: 58 cm AGFV 60 75
AH 90 204 AH 30 204 VZZIS 49,5
- AHG 60 204 6 SZ2 26,25 AHGT 60 204 10 KZ2 AGFV 60 80
AH 120 204 AH 45 204 VZZIS 52,5
3,5
AHGTI 60 204 10 KZ2
137,4

137,4 13,0 111,15

26,25 26,25
62,75

62,75 33,0 33,0

52.01 T: 36 / 48 / 58 cm 52.03 T: 58 cm 52.04 T: 58 cm 52.06 T: 58 cm 52.07 T: 58 cm

203.9 cm
Tall units
AVANCE

AH 30 204 X AH 30 204 VZX 38,4

-
51,4
AHG 60 204 9 AHGT 60 204 14 AHGA 60 72
49,5 AH 45 204 X 49,5 AH 45 204 VZX 49,5 AHGTI 60 204 14 AHGA 60 77
AH 50 204 X
AH 60 204 X 3,5

52. 150,65 150,65 62,75 150,65

52.01 T: 36 / 48 / 58 cm 52.03 T: 58 cm 52.04 T: 58 cm 52.06 T: 58 cm

AH 90 204 X AH 45 204 HW 38,4
- AHG 60 204 9 ZIZ AHGT 60 204 9D9
49,5

51,4
AH 50 204 HW AHGTI 60 204 9D9
AH 60 204 HW
107,65
3,5
Angle cupboards
137,4
150,65

62,75 62,75 92,5

52.01 52.04 52.05 52.06 52.08

T: 36 / 48 / 58 cm AH 30 204 N T: 58 cm T: 58 cm T: 36 / 58 cm
AH 30 204 ZIZ AH 45 204 N 38,4
-
51,4
AHG 60 204 9 Z2 AHGT 60 204 18 AHAW 30 204
AH 45 204 ZIZ AH 50 204 N AHGTI 60 204 18
AH 50 204 ZIZ AH 60 204 N 137

AH 60 204 ZIZ
137,4

137,4 3,5 137,4

26,25
62,75

63
62,75 33,0 62,75

52.01 T: 36 / 48 / 58 cm 52.05 T: 58 cm 52.07 T: 58 cm

AH 30 204 Z2 38,4
-
51,4
AHG 60 204 9D AHGT 60 204 18 IS
AH 45 204 Z2 AHGTI 60 204 18 IS
AH 50 204 Z2
AH 60 204 Z2 3,5
111,15
137,4
26,25

33,0 62,75 92,5

Shelves
52.02 T: 36 / 48 / 58 cm 52.05 T: 58 cm 52.08 T: 36 / 58 cm
AH 30 204 ZIZ3 38,4
-
51,4
AHG 60 204 9D ZIZ H3R 30 204
AH 45 204 ZIZ3 H3R 60 204
AH 50 204 ZIZ3 H3R 90 204
AH 60 204 ZIZ3 3,5
137,4

62,75 62,75

52.02 T: 36 / 48 / 58 cm 52.05 T: 58 cm
AH 30 204 IZ3IS 38,4
-
51,4
AHG 60 204 9D Z2
AH 45 204 IZ3IS
AH 50 204 IZ3IS
AH 60 204 IZ3IS 3,5
137,4
26,25

62,75 33,0

52.02 T: 36 / 48 / 58 cm 52.05 T: 58 cm
AH 90 204 IZ3IS 48,15
- AHG 60 204 11D Z
60,15
3,5
137,4

3,5
62,75

33,0

52.02 T: 36 / 48 / 58 cm 52.05 T: 58 cm
AH 30 204 IZ4X 39,5
AHGT 60 204 9 ZIZ
49,5 AH 45 204 IZ4X AHGTI 60 204 9 ZIZ
AH 50 204 IZ4X
AH 60 204 IZ4X
97,9

150,65 62,75

52.02 T: 36 / 48 / 58 cm 52.06 T: 58 cm
AH 90 204 IZ4X AHGT 60 204 9 Z2
49,5

39,5
AHGTI 60 204 9 Z2

97,9
26,25
150,65

33,0

52. 1/2022
 Price group
Tall units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Storage unit AH30204 L/R 30 585 641 699 734 868 999 1077
1 door AH45204 L/R 45 609 666 741 780 929 1074 1159
4 adjustable shelves AH50204 L/R 50 631 690 760 825 965 1104 1191
1 fixed shelf AH60204 L/R 60 668 729 804 898 1046 1192 1286
1 door
2 adjustable shelves
137,4

62,75

Diagram shows L

Storage unit AH90204 90 1056 1154 1284 1349 1598 1849 1999
2 doors AH120204 120 1444 1579 1765 1800 2152 2504 2708
4 adjustable shelves
1 fixed shelf
2 doors
137,4

2 adjustable shelves

With 120 cm width shelves 2.8 cm thick.

62,75

The cupboard has knock down fittings and

can be dismantled for access.

Storage unit AH30204X L/R 30 585 641 699 734 868 999 1077
1 door AH45204X L/R 45 609 666 741 780 929 1074 1159
49,5 1 adjustable shelf AH50204X L/R 50 631 690 760 825 965 1104 1191
1 fixed shelf AH60204X L/R 60 668 729 804 898 1046 1192 1286
1 door
4 adjustable shelves

150,65

Diagram shows L

Storage unit AH90204X 90 1056 1154 1284 1349 1598 1849 1999
2 doors
49,5

1 adjustable shelf
1 fixed shelf
2 doors
4 adjustable shelves

The cupboard has knock down fittings and

150,65

can be dismantled for access.

Tall storage unit AH30204ZIZ L/R 30 863 953 1039 1106 1241 1374 1442
1 door AH45204ZIZ L/R 45 892 985 1063 1131 1272 1412 1480
4 adjustable shelves AH50204ZIZ L/R 50 919 1018 1085 1156 1303 1449 1516
1 fixed shelf AH60204ZIZ L/R 60 960 1063 1137 1212 1378 1544 1620
1 pullout
1 inner pullout
137,4

62,75

Diagram shows L

Tall storage unit AH30204Z2 L/R 30 944 1038 1084 1163 1309 1458 1524
1 door AH45204Z2 L/R 45 960 1066 1131 1205 1369 1534 1617
4 adjustable shelves AH50204Z2 L/R 50 983 1087 1155 1230 1401 1570 1653
1 fixed shelf AH60204Z2 L/R 60 1020 1126 1200 1280 1471 1662 1748
2 pullouts
137,4
26,25

33,0

Diagram shows L

1/2022 52.01
 Price group
Tall units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Tall storage unit AH30204ZIZ3 L/R 30 1286 1331 1419 1509 1643 1774 1820
1 door AH45204ZIZ3 L/R 45 1319 1365 1442 1537 1675 1813 1859
2 adjustable shelves AH50204ZIZ3 L/R 50 1352 1400 1467 1563 1708 1852 1898
2 inner pullouts AH60204ZIZ3 L/R 60 1403 1454 1529 1630 1793 1955 2011
1 fixed shelf
1 pullout
137,4
1 inner pullout

62,75
Exchange wide angle hinge ANIGE 0
Diagram shows L through standard hinge, with spacer strip

Tall storage unit AH30204IZ3IS L/R 30 1166 1208 1300 1374 1511 1646 1703
1 door AH45204IZ3IS L/R 45 1202 1248 1328 1408 1550 1690 1743
2 adjustable shelves AH50204IZ3IS L/R 50 1239 1286 1355 1440 1587 1733 1786
2 inner pullouts AH60204IZ3IS L/R 60 1291 1341 1418 1508 1674 1841 1898
1 fixed shelf
1 door
137,4
1 inner drawer
1 inner pullout
62,75

Diagram shows L Exchange wide angle hinge ANIGE 0

through standard hinge, with spacer strip

Tall storage unit AH90204IZ3IS 90 1625 1705 1836 1958 2194 2430 2546
2 doors
2 adjustable shelves
2 inner pullouts
1 fixed shelf
137,4

2 doors
1 inner drawer
1 inner pullout
62,75

The cupboard has knock down fittings and

can be dismantled for access.

Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Tall storage unit AH30204IZ4X L/R 30 1117 1163 1250 1328 1463 1598 1646
1 door AH45204IZ4X L/R 45 1153 1199 1277 1359 1499 1640 1693
49,5 1 adjustable shelf AH50204IZ4X L/R 50 1189 1238 1304 1391 1537 1680 1737
1 fixed shelf AH60204IZ4X L/R 60 1240 1290 1366 1455 1620 1784 1847
1 door
4 inner pullouts

150,65 Exchange wide angle hinge ANIGE 0

through standard hinge, with spacer strip
Diagram shows L

Tall storage unit AH90204IZ4X 90 1673 1751 1882 2005 2242 2478 2594
2 doors
49,5

1 adjustable shelf
1 fixed shelf
2 doors
4 inner pullouts

The cupboard has knock down fittings and

150,65

can be dismantled for access.

Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

52.02 1/2022
 Price group
Tall units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Pharmacy tall unit AH30204GVZ2 30 991 1046 1104 1139 1273 1404 1483
1 pullout with pullout and AH45204GVZ2 45 1043 1100 1176 1214 1363 1509 1593
drawer connection AH50204GVZ2 50 1075 1134 1205 1270 1409 1549 1636
1 fixed shelf AH60204GVZ2 60 1098 1159 1235 1328 1477 1622 1716
2 inner drawers
137,4 1 pullout
1 fixed shelf
1 inner drawer
62,75
Max. loading 20 kg per pullout / drawer.

Storage unit AH30204VZZIS 30 1308 1367 1427 1525 1647 1768 1807
1 large capacity pullout with front panel AH45204VZZIS 45 1400 1464 1542 1646 1783 1916 1957
4 adjustable wire baskets with glass bottoms
1 fixed shelf
1 pullout
1 inner drawer
137,4
2 loose baskets

62,75 Max. loading 15 kg per basket.

VZ-premium equipment MPVZ30P4 95

Frame inside faced in carcase style MPVZ45P4 131
4 adjustable shelves with glass sides

Storage unit AH30204VZX L/R 30 1179 1233 1293 1375 1500 1624 1671
1 door AH45204VZX L/R 45 1282 1338 1421 1509 1647 1786 1832
49,5 1 adjustable shelf
1 fixed shelf
1 large capacity pullout with front panel
5 adjustable wire baskets with glass bottoms

Max. loading 15 kg per basket.

150,65

Diagram shows L
VZ-premium equipment MPVZ30P5 110
Frame inside faced in carcase style MPVZ45P5 153
5 adjustable shelves with glass sides

Tall utility unit AH45204HW L/R 45 649 706 787 822 971 1117 1203
1 door strapped together with AH50204HW L/R 50 674 734 800 839 992 1146 1233
original recessed handle AH60204HW L/R 60 704 766 844 884 1058 1233 1326
1 adjustable shelf
1 fixed shelf (depth 41.7 cm)
1 adjustable function shelf with railing
137,4
(depth 31 cm)
1 hose holder and 3 clamping hooks
62,75 2 adjustable shelves (depth 28 cm)

Diagram shows L

Package vertical shelf HWV 55

1 centre panel next to hinged side,
on two-door cupboards left
Shelf height 160 cm
Shelf width 18.4 cm
Installed in tall utility unit

Available from cupboard height 190 cm and from

cupboard width 50 cm.
Combination with package waste depot possible.

Package waste depot HWWD 111

1 frame with lid for waste bags
at side opposite hinged side,
on two-door cupboards right
1 cloth bag

Combination with package vertical shelf from cupboard

width 50 cm possible.

1/2022 52.03
 Price group
Tall units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Package drinks crates storage HW60GA2 77
2 racks for drinks crates made of steel tubing
for fitting in crockery- or utility unit
on site

When used in the utility unit, function shelf, hose rack

and clamping hook are dispensed with in favour of an
adjustable shelf.

Niche door AH30204N L/R 30 513 525 583 641 710 781 845
1 door strapped together with original AH45204N L/R 45 545 558 615 675 753 830 885
recessed handle and attached plinth AH50204N L/R 50 575 587 648 705 792 878 931
no rear panel AH60204N L/R 60 638 652 710 764 830 896 962
no floor
137,4

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
62,75

Diagram shows L

Price group
Housing units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Housing unit AHG602046SZIZ L/R 60 1271 1374 1446 1525 1744 1965 2065
49,5 1 door
-
52,5 1 adjustable shelf Modular parts list
3,5 1 blender AHGM60204
1 appliance niche 57-60 cm AMO6050T
13,0
1 drawer AMGN6078B
1 pullout AMU6080SZIZ
1 inner pullout
62,75
For ovens.
Diagram shows L

Housing unit AHG602046SZ2 L/R 60 1382 1497 1576 1665 1908 2152 2267
49,5 1 door
-
52,5 1 adjustable shelf Modular parts list
3,5 1 blender AHGM60204
1 appliance niche 57-60 cm AMO6050T
13,0
1 drawer AMGN6078B
2 pullouts AMU6080SZ2
26,25

33,0 For ovens.

Diagram shows L

Housing unit AHG602049 L/R 60 717 765 792 822 924 1021 1065
38,4
- 1 door with „sesame-closure“
51,4
1 adjustable shelf Modular parts list
1 appliance niche 82-95 cm AHGM60204
1 blender AMO6040TS
3,5 1 door AMGN6097
2 adjustable shelves AMU6070BT

62,75 „Sesame-closure“ see page 10.17.

For double oven or for microwave
Diagram shows L (built-in trim kit will be necessary)
and oven or for fridge.

Housing unit AHG602049ZIZ L/R 60 1004 1081 1127 1182 1343 1503 1580
38,4
- 1 door with „sesame-closure“
51,4
1 adjustable shelf Modular parts list
1 appliance niche 82-95 cm AHGM60204
1 blender AMO6040TS
3,5 1 pullout AMGN6097
1 inner pullout AMU6070BZIZ

62,75 „Sesame-closure“ see page 10.17.

For double oven or for microwave
Diagram shows L (built-in trim kit will be necessary)
and oven or for fridge.

52.04 1/2022
 Price group
Housing units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Housing unit AHG602049Z2 L/R 60 1077 1159 1210 1272 1451 1625 1708
38,4
- 1 door with „sesame-closure“
51,4
1 adjustable shelf Modular parts list
1 appliance niche 82-95 cm AHGM60204
1 blender AMO6040TS
3,5 2 pullouts AMGN6097
AMU6070BZ2
26,25 „Sesame-closure“ see page 10.17.
33,0 For double oven or for microwave
(built-in trim kit will be necessary)
Diagram shows L and oven or for fridge.

Housing unit AHG602049D L/R 60 717 765 792 822 924 1021 1065
38,4
- 1 door with „sesame-closure“
51,4
1 adjustable shelf Modular parts list
1 appliance double niche 82-95 cm AHGM60204
1 blender AMO6040TS
3,5 1 door AMGN6097D
2 adjustable shelves AMU6070BT

62,75 „Sesame-closure“ see page 10.17.

For double oven or for microwave
Diagram shows L (built-in trim kit will be necessary)
and oven or for fridge.

Housing unit AHG602049DZIZ L/R 60 1004 1081 1127 1182 1343 1503 1580
38,4
- 1 door with „sesame-closure“
51,4
1 adjustable shelf Modular parts list
1 appliance double niche 82-95 cm AHGM60204
1 blender AMO6040TS
3,5 1 pullout AMGN6097D
1 inner pullout AMU6070BZIZ

62,75 „Sesame-closure“ see page 10.17.

For double oven or for microwave
Diagram shows L (built-in trim kit will be necessary)
and oven or for fridge.

Housing unit AHG602049DZ2 L/R 60 1077 1159 1210 1272 1451 1625 1708
38,4
- 1 door with „sesame-closure“
51,4
1 adjustable shelf Modular parts list
1 appliance double niche 82-95 cm AHGM60204
1 blender AMO6040TS
3,5 2 pullouts AMGN6097D
AMU6070BZ2
26,25 „Sesame-closure“ see page 10.17.
33,0 For double oven or for microwave
(built-in trim kit will be necessary)
Diagram shows L and oven or for fridge.

Housing unit AHG6020411DZ L/R 60 957 1026 1077 1131 1283 1433 1501
48,15 1 door
-
60,15 1 adjustable shelf Modular parts list
3,5 1 blender AHGM60204
1 appliance double niche 96-108 cm AMO6050T
1 blender AMGN60117DB
3,5
1 pullout AMU6040BZ

33,0 For double oven or for microwave

(built-in trim kit will be necessary)
Diagram shows L and oven or for fridge.

Housing unit AHGT602049ZIZ L/R 60 1006 1082 1130 1183 1348 1506 1587
1 door with „sesame-closure“
39,5
1 adjustable shelf with integral ventilation
1 door for appliance niche 88 cm AHGTI602049ZIZ L/R 60 1006 1082 1130 1183 1348 1506 1587
1 pullout
1 inner pullout Modular parts list
97,9
AHGM60204
„Sesame-closure“ see page 10.17. AMO6040TS
62,75 For integrated fridge or freezer. AMGT6096
AMU6063ZIZ
Diagram shows L

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

1/2022 52.05
 Price group
Housing units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Housing unit AHGT602049Z2 L/R 60 1154 1246 1303 1366 1565 1757 1854
1 door with „sesame-closure“
39,5
1 adjustable shelf with integral ventilation
1 door for appliance niche 88 cm AHGTI602049Z2 L/R 60 1154 1246 1303 1366 1565 1757 1854
2 pullouts
Modular parts list
97,9
„Sesame-closure“ see page 10.17. AHGM60204
26,25 For integrated fridge or freezer. AMO6040TS
33,0 AMGT6096
AMU6063Z2
Diagram shows L

Housing unit AHGT6020410KZIZ L/R 60 1041 1111 1164 1230 1391 1561 1642
26,25
1 top hinged door with „sesame-closure“
1 door for appliance niche 103 cm Modular parts list
1 pullout AHGM60204
1 inner pullout AMO6027KS
AMGT60111
111,15
„Sesame-closure“ see page 10.17. AMU6063ZIZ
For integrated fridge or freezer.
62,75

Diagram shows L

Housing unit AHGT6020410KZ2 L/R 60 1189 1275 1337 1413 1608 1812 1909
26,25 1 top hinged door with „sesame-closure“
1 door for appliance niche 103 cm with integral ventilation
2 pullouts AHGTI6020410KZ2 L/R 60 1189 1275 1337 1413 1608 1812 1909

„Sesame-closure“ see page 10.17. Modular parts list

111,15
For integrated fridge or freezer. AHGM60204
26,25 AMO6027KS
33,0 AMGT60111
AMU6063Z2
Diagram shows L

Housing unit AHGT6020414 L/R 60 701 751 778 815 911 1007 1048
1 door
49,5 1 adjustable shelf with integral ventilation
1 door for appliance niche 140 cm AHGTI6020414 L/R 60 701 751 778 815 911 1007 1048

Special handle solution see page 10.17. Modular parts list

For integrated fridge and freezer. AHGM60204
AMO6050T
150,65 AMGT60154

Diagram shows L

Housing unit AHGT602049D9 L/R 60 587 618 638 665 734 802 840
2 doors for appliance niche top 88 cm
and bottom 88 cm with integral ventilation
AHGTI602049D9 L/R 60 587 618 638 665 734 802 840
For integrated fridge and freezer.
107,65
Modular parts list
AHGM60204
AMGT60111
92,5 AMGT6096

Diagram shows L

Housing unit AHGT6020418 L/R 60 707 750 778 811 907 1001 1046
1 door strapped together for
appliance niche 178 cm with integral ventilation

137
or AHGTI6020418 L/R 60 707 750 778 811 907 1001 1046
2 doors for appliance niche 178 cm
1 support hinge SSCH Modular parts list
when the front projects more than 26 cm AHGM60204
63 from the appliance AMGT60204

Special handle solution see page 10.17.

Diagram shows L For integrated fridge and freezer.

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

52.06 1/2022
 Price group
Housing units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Housing unit AHGT6020418IS L/R 60 765 808 837 869 974 1077 1104
2 doors for appliance niche 178 cm
1 support hinge SSCH with integral ventilation
when the front projects more than 26 cm AHGTI6020418IS L/R 60 765 808 837 869 974 1077 1104
from the appliance
111,15
1 inner drawer

Special handle solution see page 10.17.

92,5 For integrated fridge and freezer.

Diagram shows L

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

Price group
Elevated dishwashers
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Dishwasher support ATGSU6052BZ 60 474 491 512 584 661 735 744
Carcase height 41.5 cm
1 blender
3,5 1 recessed handle 3.5 cm
33,0 1 pullout with 33.0 cm
high front panel
1 drip tray

Side panel or fixing essential e.g.

panels or cupboards.

Dishwasher-front Module height 75 cm

for fully integrated dishwasher, Appliance height 82 cm
height 82 or 87 cm. AGFV6075 60 170 182 215 223 284 345 376

Please state appliance model on order! Module height 80 cm

Side panel or fixing essential e.g. Appliance height 87 cm
panels or cupboards. AGFV6080 60 175 189 224 231 296 360 396

Dishwasher-Top cupboard AHGA6072 L/R 60 398 415 428 440 484 528 550
1 door AHGA6077 L/R 60 398 415 428 440 484 528 550
2 adjustable shelves
1 recessed handle 3.5 cm

Side panel or fixing essential e.g. panels

or tall units.

Diagram shows L

1/2022 52.07
 Price group
End tall units
Carcase height 203.9 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

End tall unit Basic type
1 angled door Cupboard depth 36 cm
3 fixed glass shelves AHAW3020436 L/R 30 1683 1799 1869 1961 2199 2438 2538
1 fixed shelf Carcase depth 56 cm
1 angled door AHAW30204 L/R 30 1769 1890 1961 2061 2310 2559 2667
137,4 2 fixed glass shelves
Always state interior style, Extra charge interior
possible colours see chapter 11! MPK/KH/KG 0
62,75 MPFF/PF/VM 107
MPFS/ME 156
Diagram shows L MPFG 245
MPH 261
Not available in CONCRETE-A, STEEL-A, STONE-A

LED-Linear-interior lighting For depth 36 cm

1 light with LED-strip HAW36LE 212
integrated in the top
1 light with LED-strip For depth 58 cm
integrated in fixed shelf HAW58LE 236
Light temperature 4000K, neutral white
1 adapter 240 volt 50 HZ, 24 volt,
40 watt
1 distributor for constant 4000K
2 extension cables 4 pole, 200 cm
1 HSSC sensor switch
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

Surface style
Tall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 203.9 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit, Shelf unit depth 36.2 cm
thick 2.8 cm H3R3020436 10-30 790 825 897 1111 1168 1224 1398 1153
Back panel with circumferential shadow joint H3R6020436 30-60 843 888 976 1190 1257 1323 1506 1239
4 shelves H3R9020436 60-90 896 951 1055 1269 1346 1422 1614 1326

Shelf unit interior colour = shelf unit exterior colour. Shelf unit depth 58.2 cm
Widths in mm grid variably available. H3R30204 10-30 846 886 960 1191 1253 1315 1498 1235
Please state desired width. H3R60204 30-60 904 953 1042 1280 1350 1420 1620 1331
Available without extra charge for free standing H3R90204 60-90 962 1020 1124 1369 1447 1525 1742 1427
planning, optional without back panel with visible
edges at the rear. Please state on order.

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Extra charge for basis shelf unit 58.2 cm deep.

52.08 1/2022
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 203.9 cm
Side depth 34 cm FS20434 L/R 34 0 0 137 197 270 338 177
Side depth 46 cm FS20446 L/R 46 0 0 159 230 356 446 234
Side depth 56 cm FS20456 L/R 56 0 0 159 230 356 446 234
Side depth 61 cm FS20461 L/R 61 0 0 184 265 410 514 271
Side depth 66 cm FS20466 L/R 66 0 0 184 265 410 514 271
Side depth 76 cm FS20476 L/R 76 0 0 194 281 435 544 285
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 203.9 cm
Side depth up to 34 cm FSUEL20434 L/R 34 92 92 229 289 362 430 269
Side depth up to 46 cm FSUEL20446 L/R 46 92 92 251 322 448 538 326
Side depth up to 58 cm FSUEL20458 L/R 58 92 92 251 322 448 538 326
Side depth up to 63 cm FSUEL20463 L/R 63 92 92 276 357 502 606 363
Side depth up to 68 cm FSUEL20468 L/R 68 146 146 330 411 556 660 417
Side depth up to 76 cm FSUEL20476 L/R 76 146 146 340 427 581 690 431
Diagram shows R

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

1/2022 52.09
 Price group
End panels
Width 5 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Tall unit end panel Carcase height 203.9 cm
Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) AHW520458 L/R 5 572 601 678 757 862 970 1047
Width 5 cm
Divided over front height 62.75 cm
137,4
with recessed handle

Please state the relevant L/R.

62,75
The end panel width is always 5 cm.
Diagram shows L

Tall unit end panel Carcase height 203.9 cm

Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) AHW520458Z2 L/R 5 647 675 754 832 938 1044 1122
Width 5 cm
Divided over front height 33.0 and 62.75 cm
137,4
with recessed handle
26,25
Please state the relevant L/R.
33,0
The end panel width is always 5 cm.
Diagram shows L

Tall unit end panel Carcase height 203.9 cm

49,5 Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) AHW520458X L/R 5 572 601 678 757 862 970 1047
Width 5 cm
Divided over front height 150.65 cm
with recessed handle

Please state the relevant L/R.

150,65
The end panel width is always 5 cm.
Diagram shows L

Price group
Blenders

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Tall unit blender Carcase height 203.9 cm
Front finish AHP20204 L/R 20 100 114 119 127 142 158 161

Front finish blenders are manufactured with a maximum

20 cm width.

203,65

Diagram shows L

Divided blender .
Divided over front height 33.0 cm AANBT33 39
with recessed handle

Divided over front height 62.75 cm AANBT66 39

with recessed handle

Divided over front height 150.65 cm AANBT150 39

with recessed handle

Suitable for blenders.

52.10 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Tall unit corner blender 90° Carcase height 203.9 cm
Front finish AHPE204 10 211 232 248 268 298 330 341
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
203,65 from l to r on order.

4
4

Extra charge AMPHP5 5 34 36 36 41 45 49 67

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 203.9 cm

Front finish AHPEW204 10 216 238 256 271 302 338 343
Freely selectable angle up to max. 270°
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
203,65
from l to r on order.
3
3

Extra charge AMPHP5 5 34 36 36 41 45 49 67

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided corner blender AANEBT33 61 73 94 110 125 140 196

additional height division 33.0 cm from
bottom edge, recessed handle continuous
with internal mitre

Suitable for 90° corner blenders and

corner blenders.

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

1/2022 52.11
 Surface style
Support panels with plinth Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MC H
Support panel with plinth AHWSP20456 L/R 56 222 222 444 585 645 704 804 626
for blender AHWSP20466 L/R 66 243 243 510 673 737 801 911 718
Thickness 1.6 cm
prepared for connection to
tall unit blenders with
recessed handle milling

Only as accessory type for blenders AHP ..,

not available loose!
For use next to appliances or an open niche.
Visible side facing the appliance or the open niche,
Diagram shows R
please state left/right version.

Support panel with plinth up to

Thickness 1.6 cm HWS20458 L/R 63 195 195 418 560 621 682 782 596
both sides finished HWS20468 L/R 70 221 221 472 635 708 780 892 686

Please state required depth.

Please state whether placed L/R and plinth height.
Fit plinth return (7 mm) on site.
Plinth height 1.5 cm larger for floor adjustment.

Diagram shows R

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 203.9 cm
flush with carcase HSB20204 20 58 60 70 90 98 105 123 83

Price group
Rear panels
Front finish
Neutral

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 66 cm
in variable sizes RWF204Y 424 489 610 728 902 1075 1229
Height up to 203.65 cm
137,4 Max. width 120 cm
without recessed handle
with loose plinth
66,0
Minimum charged 0.5 metres.

Rear panel in Front line 66 cm

front finish RWF30204Y 30 219 239 290 330 420 512 581
in fixed front sizes RWF45204Y 45 231 259 323 383 470 560 641
without recessed handle RWF50204Y 50 235 272 339 403 501 598 683
with loose plinth RWF60204Y 60 246 292 360 434 550 667 753
137,4 For carcase height 203.9 cm old RW .. 204 Y

66,0

52.12 1/2022
AVANCE
Tall units, carcase height 217.15 cm

CARCASE LINE 80

Tall units 53. 01-04

Housing units 53. 04-07

Elevated dishwashers 53. 08

End tall units 53. 08

Tall shelf units, thick 2,8 cm 53. 09

Visible carcase sides 53. 09

End panels 53. 10

Blenders 53. 10-11

Support panels with plinth 53. 12

Blenders 53. 12

217.15 cm
Tall units
AVANCE
Rear panels 53. 12

53.

1/2022 53.
 AVANCE
Tall units, carcase height 217.15 cm
T: Cupboard depth cm

Function cupboards Housing units Elevated dishwashers

53.01 T: 36 / 48 / 58 cm 53.03 T: 36 / 48 / 58 cm 53.04 T: 58 cm 53.06 T: 58 cm 53.08 T: 58 cm

AH 30 217 AH 30 217 GVZ2 70,15 AHG 60 217 6 SZIZ AHGT 60 217 12 ZIZ ATGSU 60 52 BZ
AH 45 217 AH 45 217 GVZ2 -
73,15 AHGTI 60 217 12 ZIZ
AH 50 217 AH 50 217 GVZ2 3,5

AH 60 217 AH 60 217 GVZ2 3,5

150,65 150,65 13,0 150,65
33,0
62,75 62,75 62,75 62,75

53.01 53.03 53.04 53.06 53.08

T: 36 / 48 / 58 cm T: 58 cm T: 58 cm T: 58 cm AGFV 60 75
AH 90 217 AH 30 217 VZZIS 51,65
-
AHG 60 217 9 Z2 AHGT 60 217 12 ISX AGFV 60 80
AH 120 217 AH 45 217 VZZIS 64,65
62,75 AHGTI 60 217 12 ISX
150,65

150,65 3,5
26,25
62,75

62,75 33,0 150,65

53.01 T: 36 / 48 / 58 cm 53.03 T: 58 cm 53.04 T: 58 cm 53.06 T: 58 cm 53.08 T: 58 cm

AH 30 217 X AH 30 217 VZX 51,65
-
AHG 60 217 9D 26,25 AHGT 60 217 9D9 K AHGA 60 85
62,75 AH 45 217 X 62,75 AH 45 217 VZX 64,65 AHGTI 60 217 9D9 K AHGA 60 90
AH 50 217 X
AH 60 217 X 92,5
3,5

150,65 150,65 62,75 92,5

53.01 T: 36 / 48 / 58 cm 53.03 T: 58 cm 53.04 T: 58 cm 53.07 T: 58 cm

44,65
AH 90 217 X AH 45 217 HW -
57,65 AHG 60 217 9D KZIZ AHGT 60 217 18 IS
62,75

AH 50 217 HW 3,5
AHGTI 60 217 18 IS
AH 60 217 HW
124,4
3,5
150,65
Angle cupboards
217.15 cm

150,65
Tall units
AVANCE

62,75 62,75 92,5

53.01 53.04 53.05 53.07 53.08

T: 36 / 48 / 58 cm AH 30 217 N T: 58 cm T: 58 cm T: 36 / 58 cm
AH 30 217 ZIZ AH 45 217 N 51,65
-
AHG 60 217 9D ZIZ 26,25 AHGT 60 217 18 K AHAW 30 217
AH 45 217 ZIZ AH 50 217 N 64,65 AHGTI 60 217 18 K
AH 50 217 ZIZ AH 60 217 N
53. AH 60 217 ZIZ
150,65

150,65 3,5 150,65

127,65
62,75

62,75 62,75 62,75 62,75

53.01 T: 36 / 48 / 58 cm 53.05 T: 58 cm 53.07 T: 58 cm

44,65
AH 30 217 Z2 -
57,65 AHG 60 217 9D KZ2 AHGT 60 217 22
AH 45 217 Z2 3,5
AHGTI 60 217 22
AH 50 217 Z2
AH 60 217 Z2 3,5
124,4
150,65
26,25 26,25

33,0 33,0 92,5

Shelves
53.02 T: 36 / 48 / 58 cm 53.05 T: 58 cm 53.09 T: 36 / 58 cm
AH 30 217 ZIZ3 51,65
-
AHG 60 217 9D Z2 H3R 30 217
AH 45 217 ZIZ3 64,65 H3R 60 217
AH 50 217 ZIZ3 H3R 90 217
AH 60 217 ZIZ3 3,5
150,65
26,25

62,75 33,0

53.02 T: 36 / 48 / 58 cm 53.05 T: 58 cm
AH 30 217 IZ3IS 62,75 AHG 60 217 12D Z
AH 45 217 IZ3IS -
74,75
AH 50 217 IZ3IS 3,5

AH 60 217 IZ3IS
150,65
3,5

62,75 33,0

53.02 T: 36 / 48 / 58 cm 53.05 T: 58 cm
AH 90 217 IZ3IS AHGT 60 217 9 ZIZ
49,25 AHGTI 60 217 9 ZIZ
150,65

97,9
62,75

62,75

53.02 T: 36 / 48 / 58 cm 53.05 T: 58 cm
AH 30 217 IZ4X AHGT 60 217 9 Z2
62,75 AH 45 217 IZ4X 49,25
AHGTI 60 217 9 Z2
AH 50 217 IZ4X
AH 60 217 IZ4X
97,9
26,25

150,65 33,0

53.02 T: 36 / 48 / 58 cm 53.06 T: 58 cm
AH 90 217 IZ4X 39,5
AHGT 60 217 10 ZIZ
62,75

AHGTI 60 217 10 ZIZ

111,15
150,65

62,75

53.06 T: 58 cm
39,5
AHGT 60 217 10 Z2
AHGTI 60 217 10 Z2

111,15
26,25

33,0

53. 1/2022
 Price group
Tall units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Storage unit AH30217 L/R 30 677 740 827 868 1001 1134 1203
1 door AH45217 L/R 45 721 787 887 931 1074 1220 1294
4 adjustable shelves AH50217 L/R 50 740 810 900 972 1123 1273 1352
1 fixed shelf AH60217 L/R 60 770 844 947 1032 1202 1369 1455
1 door
2 adjustable shelves
150,65

62,75

Diagram shows L

Storage unit AH90217 90 1170 1280 1448 1584 1799 2016 2146
2 doors AH120217 120 1570 1716 1949 2137 2398 2662 2835
4 adjustable shelves
1 fixed shelf
2 doors
2 adjustable shelves
150,65

With 120 cm width shelves 2.8 cm thick.

The cupboard has knock down fittings and
62,75

can be dismantled for access.

Storage unit AH30217X L/R 30 677 740 827 868 1001 1134 1203
1 door AH45217X L/R 45 721 787 887 931 1074 1220 1294
2 adjustable shelves AH50217X L/R 50 740 810 900 972 1123 1273 1352
62,75
1 fixed shelf AH60217X L/R 60 770 844 947 1032 1202 1369 1455
1 door
4 adjustable shelves

150,65

Diagram shows L

Storage unit AH90217X 90 1170 1280 1448 1584 1799 2016 2146
2 doors
62,75

2 adjustable shelves
1 fixed shelf
2 doors
4 adjustable shelves

The cupboard has knock down fittings and

150,65

can be dismantled for access.

Tall storage unit AH30217ZIZ L/R 30 981 1084 1192 1271 1387 1500 1559
1 door AH45217ZIZ L/R 45 1001 1107 1206 1284 1421 1557 1616
4 adjustable shelves AH50217ZIZ L/R 50 1022 1130 1220 1299 1455 1614 1672
1 fixed shelf AH60217ZIZ L/R 60 1054 1164 1268 1349 1529 1709 1775
1 pullout
1 inner pullout
150,65

62,75

Diagram shows L

Tall storage unit AH30217Z2 L/R 30 1022 1130 1216 1295 1444 1594 1660
1 door AH45217Z2 L/R 45 1065 1176 1276 1358 1520 1680 1750
4 adjustable shelves AH50217Z2 L/R 50 1085 1199 1290 1374 1555 1734 1806
1 fixed shelf AH60217Z2 L/R 60 1115 1234 1335 1421 1626 1831 1912
2 pullouts

150,65
26,25

33,0

Diagram shows L

1/2022 53.01
 Price group
Tall units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Tall storage unit AH30217ZIZ3 L/R 30 1410 1454 1557 1663 1778 1892 1929
1 door AH45217ZIZ3 L/R 45 1440 1487 1585 1690 1823 1957 1996
3 adjustable shelves AH50217ZIZ3 L/R 50 1471 1520 1614 1717 1869 2023 2063
2 inner pullouts AH60217ZIZ3 L/R 60 1514 1565 1670 1778 1955 2133 2179
1 fixed shelf
1 pullout
150,65 1 inner pullout

62,75 Exchange wide angle hinge ANIGE 0

through standard hinge, with spacer strip
Diagram shows L

Tall storage unit AH30217IZ3IS L/R 30 1267 1313 1421 1531 1637 1743 1787
1 door AH45217IZ3IS L/R 45 1304 1352 1451 1560 1687 1816 1859
3 adjustable shelves AH50217IZ3IS L/R 50 1342 1392 1482 1588 1738 1888 1933
2 inner pullouts AH60217IZ3IS L/R 60 1389 1440 1542 1641 1820 2001 2054
1 fixed shelf
1 door
150,65 1 inner drawer
1 inner pullout

62,75
Exchange wide angle hinge ANIGE 0
Diagram shows L
through standard hinge, with spacer strip

Tall storage unit AH90217IZ3IS 90 1731 1865 1966 2182 2373 2563 2666
2 doors
3 adjustable shelves
2 inner pullouts
1 fixed shelf
2 doors
150,65

1 inner drawer
1 inner pullout
62,75

The cupboard has knock down fittings and

can be dismantled for access.

Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Tall storage unit AH30217IZ4X L/R 30 1237 1285 1389 1477 1594 1711 1757
1 door AH45217IZ4X L/R 45 1274 1324 1420 1512 1648 1784 1829
2 adjustable shelves AH50217IZ4X L/R 50 1312 1360 1451 1549 1702 1855 1900
62,75
1 fixed shelf AH60217IZ4X L/R 60 1358 1408 1511 1613 1790 1967 2020
1 door
4 inner pullouts

Exchange wide angle hinge ANIGE 0

150,65 through standard hinge, with spacer strip
Diagram shows L

Tall storage unit AH90217IZ4X 90 1766 1845 2012 2143 2379 2613 2709
2 doors
62,75

2 adjustable shelves
1 fixed shelf
2 doors
4 inner pullouts

The cupboard has knock down fittings and

150,65

can be dismantled for access.

Exchange wide angle hinge ANIGD 0

through standard hinge, with spacer strip
both sides

Please note: Through using wide angle hinges on the hinged side, open doors protrude by 7 mm. It is also essential that the doors can be opened to an
angle of 90°.

53.02 1/2022
 Price group
Tall units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Pharmacy tall unit AH30217GVZ2 30 1043 1106 1193 1234 1367 1500 1569
1 pullout with pullout and AH45217GVZ2 45 1099 1165 1266 1309 1453 1599 1672
drawer connection AH50217GVZ2 50 1129 1198 1288 1361 1512 1662 1741
1 fixed shelf AH60217GVZ2 60 1154 1227 1331 1416 1585 1753 1838
2 inner drawers
1 pullout
150,65 1 fixed shelf
1 inner drawer
62,75
Max. loading 20 kg per pullout / drawer.

Storage unit AH30217VZZIS 30 1327 1408 1494 1596 1717 1837 1869
1 large capacity pullout with front panel AH45217VZZIS 45 1438 1522 1619 1729 1863 1998 2029
5 adjustable wire baskets with glass bottoms
1 fixed shelf
1 pullout
1 inner drawer
150,65 2 loose baskets

Max. loading 15 kg per basket.

62,75

VZ-premium equipment MPVZ30P5 110

Frame inside faced in carcase style MPVZ45P5 153
5 adjustable shelves with glass sides

Storage unit AH30217VZX L/R 30 1208 1271 1358 1444 1570 1695 1735
1 door AH45217VZX L/R 45 1333 1400 1496 1587 1728 1867 1907
2 adjustable shelves
62,75
1 fixed shelf
1 large capacity pullout with front panel
5 adjustable wire baskets with glass bottoms

Max. loading 15 kg per basket.

150,65

Diagram shows L
VZ-premium equipment MPVZ30P5 110
Frame inside faced in carcase style MPVZ45P5 153
5 adjustable shelves with glass sides

Tall utility unit AH45217HW L/R 45 755 823 922 970 1114 1258 1332
1 door strapped together with AH50217HW L/R 50 779 848 937 981 1146 1309 1388
original recessed handle AH60217HW L/R 60 807 878 980 1030 1219 1408 1491
2 adjustable shelves
1 fixed shelf (depth 41.7 cm)
1 adjustable function shelf with railing
150,65 (depth 31 cm)
1 hose holder and 3 clamping hooks
2 adjustable shelves (depth 28 cm)
62,75

Diagram shows L

Package vertical shelf HWV 55

1 centre panel next to hinged side,
on two-door cupboards left
Shelf height 160 cm
Shelf width 18.4 cm
Installed in tall utility unit

Available from cupboard height 190 cm and from

cupboard width 50 cm.
Combination with package waste depot possible.

Package waste depot HWWD 111

1 frame with lid for waste bags
at side opposite hinged side,
on two-door cupboards right
1 cloth bag

Combination with package vertical shelf from cupboard

width 50 cm possible.

1/2022 53.03
 Price group
Tall units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Package drinks crates storage HW60GA2 77
2 racks for drinks crates made of steel tubing
for fitting in crockery- or utility unit
on site

When used in the utility unit, function shelf, hose rack

and clamping hook are dispensed with in favour of an
adjustable shelf.

Niche door AH30217N L/R 30 531 547 605 665 736 808 866
1 door strapped together with original AH45217N L/R 45 581 594 650 708 784 858 923
recessed handle and attached plinth AH50217N L/R 50 635 650 706 763 846 930 1016
no rear panel AH60217N L/R 60 697 709 762 819 908 996 1078
no floor
150,65

Fixing sides in matching carcase colour.

Plinth omitted with AN TU 85.
62,75

Diagram shows L

Price group
Housing units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Housing unit AHG602176SZIZ L/R 60 1314 1417 1487 1571 1797 2025 2131
1 door
70,15
- 2 adjustable shelves Modular parts list
73,15
3,5 1 blender AHGM60217
1 appliance niche 57-60 cm AMO6068T
1 drawer AMGN6078B
13,0 1 pullout AMU6080SZIZ
1 inner pullout

62,75 For ovens.

Diagram shows L

Housing unit AHG602179Z2 L/R 60 1104 1188 1243 1310 1490 1671 1753
51,65 1 door with „sesame-closure“
- 1 adjustable shelf Modular parts list
64,65
1 appliance niche 82-95 cm AHGM60217
1 blender AMO6053TS
2 pullouts AMGN6097
3,5 AMU6070BZ2
26,25 „Sesame-closure“ see page 10.17.
For double oven or for microwave
33,0 (built-in trim kit will be necessary)
and oven or for fridge.
Diagram shows L

Housing unit AHG602179D L/R 60 744 794 825 860 963 1067 1110
51,65 1 door with „sesame-closure“
-
64,65 1 adjustable shelf Modular parts list
1 appliance double niche 82-95 cm AHGM60217
1 blender AMO6053TS
1 door AMGN6097D
3,5 2 adjustable shelves AMU6070BT

„Sesame-closure“ see page 10.17.

62,75 For double oven or for microwave
(built-in trim kit will be necessary)
Diagram shows L
and oven or for fridge.

44,65 Housing unit AHG602179DKZIZ 60 1182 1276 1339 1407 1603 1798 1889
-
57,65 1 top hinged door
3,5 1 blender Modular parts list
1 appliance double niche 82-95 cm AHGM60217
1 blender AMO6036K
1 pullout AMGN60104DB
3,5 1 inner pullout AMU6070BZIZ

For double oven or for microwave

62,75 (built-in trim kit will be necessary)
and oven or for fridge.

53.04 1/2022
 Price group
Housing units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Housing unit AHG602179DZIZ L/R 60 1031 1110 1160 1220 1382 1549 1625
51,65 1 door with „sesame-closure“
-
64,65 1 adjustable shelf Modular parts list
1 appliance double niche 82-95 cm AHGM60217
1 blender AMO6053TS
1 pullout AMGN6097D
3,5 1 inner pullout AMU6070BZIZ

„Sesame-closure“ see page 10.17.

62,75 For double oven or for microwave
(built-in trim kit will be necessary)
Diagram shows L
and oven or for fridge.

44,65 Housing unit AHG602179DKZ2 60 1255 1354 1422 1497 1711 1920 2017
-
57,65 1 top hinged door
3,5 1 blender Modular parts list
1 appliance double niche 82-95 cm AHGM60217
1 blender AMO6036K
2 pullouts AMGN60104B
3,5 AMU6070BZ2
26,25 For double oven or for microwave
(built-in trim kit will be necessary)
33,0 and oven or for fridge.

Housing unit AHG602179DZ2 L/R 60 1104 1188 1243 1310 1490 1671 1753
51,65 1 door with „sesame-closure“
-
64,65 1 adjustable shelf Modular parts list
1 appliance double niche 82-95 cm AHGM60217
1 blender AMO6053TS
2 pullouts AMGN6097D
3,5 AMU6070BZ2
26,25 „Sesame-closure“ see page 10.17.
For double oven or for microwave
33,0 (built-in trim kit will be necessary)
and oven or for fridge.
Diagram shows L

Housing unit AHG6021712DZ L/R 60 1000 1069 1118 1177 1336 1493 1567
1 door
62,75
- 2 adjustable shelves Modular parts list
74,75
3,5 1 blender AHGM60217
1 appliance double niche 96-108 cm AMO6063T
1 blender AMGN60117DB
1 pullout AMU6040BZ
3,5
For microwave and oven.
33,0

Diagram shows L

Housing unit AHGT602179ZIZ L/R 60 1041 1116 1167 1226 1394 1566 1639
1 door
49,25 1 adjustable shelf with integral ventilation
1 door for appliance niche 88 cm AHGTI602179ZIZ L/R 60 1041 1116 1167 1226 1394 1566 1639
1 pullout
1 inner pullout Modular parts list
97,9 AHGM60217
For integrated fridge or freezer. AMO6050T
AMGT60105
62,75 AMU6063ZIZ
Diagram shows L

Housing unit AHGT602179Z2 L/R 60 1189 1280 1340 1409 1611 1817 1906
1 door
49,25 1 adjustable shelf with integral ventilation
1 door for appliance niche 88 cm AHGTI602179Z2 L/R 60 1189 1280 1340 1409 1611 1817 1906
2 pullouts
Modular parts list
97,9 For integrated fridge or freezer. AHGM60217
26,25 AMO6050T
AMGT60105
33,0 AMU6063Z2
Diagram shows L

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

1/2022 53.05
 Price group
Housing units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Housing unit AHGT6021710ZIZ L/R 60 1036 1109 1159 1221 1385 1551 1628
1 door with „sesame-closure“
39,5
1 adjustable shelf with integral ventilation
1 door for appliance niche 103 cm AHGTI6021710ZIZ L/R 60 1036 1109 1159 1221 1385 1551 1628
1 pullout
1 inner pullout Modular parts list
111,15 AHGM60217
„Sesame-closure“ see page 10.17. AMO6040TS
For integrated fridge or freezer. AMGT60111
62,75 AMU6063ZIZ
Diagram shows L

Housing unit AHGT6021710Z2 L/R 60 1184 1273 1332 1404 1602 1802 1895
1 door with „sesame-closure“
39,5 1 adjustable shelf with integral ventilation
1 door for appliance niche 103 cm AHGTI6021710Z2 L/R 60 1184 1273 1332 1404 1602 1802 1895
2 pullouts
Modular parts list
111,15 „Sesame-closure“ see page 10.17. AHGM60217
26,25 For integrated fridge or freezer. AMO6040TS
AMGT60111
33,0 AMU6063Z2
Diagram shows L

Housing unit AHGT6021712ZIZ L/R 60 1061 1144 1194 1258 1429 1600 1680
1 door for box shelf and
appliance niche 122 cm with integral ventilation
1 pullout AHGTI6021712ZIZ L/R 60 1061 1144 1194 1258 1429 1600 1680
1 inner pullout

150,65 For integrated fridge or freezer.

62,75

Diagram shows L

Housing unit AHGT6021712ISX L/R 60 853 940 999 1062 1215 1365 1444
1 door
2 adjustable shelves with integral ventilation
62,75
1 door for appliance niche 122 cm AHGTI6021712ISX L/R 60 853 940 999 1062 1215 1365 1444
1 inner drawer

Special handle solution see page 10.17.

For integrated fridge/freezer combination.

150,65

Diagram shows L

Housing unit AHGT602179D9K L/R 60 699 742 769 797 891 978 1035
26,25 1 top hinged door with „sesame-closure“
2 doors for appliance niche top 88 cm with integral ventilation
and bottom 88 cm AHGTI602179D9K L/R 60 699 742 769 797 891 978 1035

92,5 „Sesame-closure“ see page 10.17.

For integrated fridge and freezer.

92,5

Diagram shows L

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

53.06 1/2022
 Price group
Housing units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Housing unit AHGT6021718IS L/R 60 818 866 900 938 1052 1165 1196
2 doors for box shelf and
appliance niche 178 cm with integral ventilation
1 support hinge SSCH AHGTI6021718IS L/R 60 818 866 900 938 1052 1165 1196
when the front projects more than 26 cm
124,4 from the appliance
1 inner drawer

Special handle solution see page 10.17.

92,5 For integrated fridge and freezer.
Diagram shows L

Housing unit AHGT6021718K L/R 60 809 860 894 937 1048 1161 1221
26,25 1 top hinged door with „sesame-closure“
1 door strapped together for with integral ventilation
appliance niche 178 cm AHGTI6021718K L/R 60 809 860 894 937 1048 1161 1221
or
2 doors for appliance niche 178 cm
127,65 1 support hinge SSCH
when the front projects more than 26 cm
from the appliance
62,75
Special top hinged door and special handle solution
Diagram shows L
see page 10.17.
For integrated fridge and freezer.

Housing unit AHGT6021722 L/R 60 762 812 843 880 984 1088 1137
2 doors or 1 door strap. together 217 cm
high in front of appliance niche 178 cm with integral ventilation
with special handle AHGTI6021722 L/R 60 762 812 843 880 984 1088 1137
1 support hinge SSCH
124,4 when the front projects more than 26 cm Modular parts list
from the appliance AHGM60217
AMGT60217
Special handle solution see page 10.17.
92,5 For integrated fridge and freezer.
Diagram shows L

Attention! Integral ventilation AN INDB is not always technically feasible, depending on the chosen electrical appliance or required alterations to the
cupboard. It is essential that appliances with 2 doors are checked technically.

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

1/2022 53.07
 Price group
Elevated dishwashers
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Dishwasher support ATGSU6052BZ 60 474 491 512 584 661 735 744
Carcase height 41.5 cm
1 blender
3,5 1 recessed handle 3.5 cm
33,0 1 pullout with 33.0 cm
high front panel
1 drip tray

Side panel or fixing essential e.g.

panels or cupboards.

Dishwasher-front Module height 75 cm

for fully integrated dishwasher, Appliance height 82 cm
height 82 or 87 cm. AGFV6075 60 170 182 215 223 284 345 376

Please state appliance model on order! Module height 80 cm

Side panel or fixing essential e.g. Appliance height 87 cm
panels or cupboards. AGFV6080 60 175 189 224 231 296 360 396

Dishwasher-Top cupboard AHGA6085 L/R 60 429 449 462 479 529 580 608
1 door AHGA6090 L/R 60 429 449 462 479 529 580 608
2 adjustable shelves
1 recessed handle 3.5 cm

Side panel or fixing essential e.g. panels

or tall units.

Diagram shows L

Price group
End tall units
Carcase height 217.15 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

End tall unit Basic type
1 angled door Cupboard depth 36 cm
4 fixed glass shelves AHAW3021736 L/R 30 1786 1908 1980 2077 2330 2581 2689
1 fixed shelf Carcase depth 56 cm
1 angled door AHAW30217 L/R 30 1882 2011 2087 2191 2457 2723 2834
2 fixed glass shelves
150,65 Always state interior style, Extra charge interior
possible colours see chapter 11! MPK/KH/KG 0
MPFF/PF/VM 107
62,75
MPFS/ME 156
Diagram shows L MPFG 245
MPH 261
Not available in CONCRETE-A, STEEL-A, STONE-A

LED-Linear-interior lighting For depth 36 cm

1 light with LED-strip HAW36LE 212
integrated in the top
1 light with LED-strip For depth 58 cm
integrated in fixed shelf HAW58LE 236
Light temperature 4000K, neutral white
1 adapter 240 volt 50 HZ, 24 volt,
40 watt
1 distributor for constant 4000K
2 extension cables 4 pole, 200 cm
1 HSSC sensor switch
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

53.08 1/2022
 Surface style
Tall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 217.15 cm, shelf unit depth 36.2 / 58.2 / 68.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall shelf unit, Shelf unit depth 36.2 cm
thick 2.8 cm H3R3021736 10-30 838 874 951 1177 1237 1297 1479 1251
Back panel with circumferential shadow joint H3R6021736 30-60 893 941 1033 1264 1334 1404 1601 1346
4 shelves H3R9021736 60-90 948 1008 1115 1351 1431 1511 1723 1441

Shelf unit interior colour = shelf unit exterior colour. Shelf unit depth 58.2 cm
Widths in mm grid variably available. H3R30217 10-30 898 941 1022 1268 1334 1400 1598 1346
Please state desired width. H3R60217 30-60 957 1009 1107 1359 1434 1509 1723 1447
Available without extra charge for free standing H3R90217 60-90 1016 1077 1192 1450 1534 1618 1848 1548
planning, optional without back panel with visible
edges at the rear. Please state on order.

Depth extensions 68.2 cm ANHT68 66 68 76 91 97 102 118 112

for tall shelf units

Extra charge for basis shelf unit 58.2 cm deep.

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 217.15 cm
Side depth 34 cm FS21734 L/R 34 0 0 146 213 287 357 188
Side depth 46 cm FS21746 L/R 46 0 0 173 251 357 448 236
Side depth 56 cm FS21756 L/R 56 0 0 173 251 357 448 236
Side depth 61 cm FS21761 L/R 61 0 0 197 289 411 516 272
Side depth 66 cm FS21766 L/R 66 0 0 197 289 411 516 272
Side depth 76 cm FS21776 L/R 76 0 0 211 305 436 546 287
Diagram shows R
Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall units FSHL L/R 130 130 - - - - -

Leading edge as carcase exterior side.

Diagram shows R

Visible carcase side with .

depth increase
Carcase height 217.15 cm
Side depth up to 34 cm FSUEL21734 L/R 34 92 92 238 305 379 449 280
Side depth up to 46 cm FSUEL21746 L/R 46 92 92 265 343 449 540 328
Side depth up to 58 cm FSUEL21758 L/R 58 92 92 265 343 449 540 328
Side depth up to 63 cm FSUEL21763 L/R 63 92 92 289 381 503 608 364
Side depth up to 68 cm FSUEL21768 L/R 68 146 146 343 435 557 662 418
Side depth up to 76 cm FSUEL21776 L/R 76 146 146 357 451 582 692 433
Diagram shows R

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

1/2022 53.09
 Price group
End panels
Width 5 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Tall unit end panel Carcase height 217.15 cm
Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) AHW521758 L/R 5 608 638 718 803 917 1029 1111
Width 5 cm
Divided over front height 62.75 cm
with recessed handle
150,65

Please state the relevant L/R.

62,75 The end panel width is always 5 cm.

Diagram shows L

Tall unit end panel Carcase height 217.15 cm

Front finish Depth up to 62.5 cm
wall-bound solution (one-sided) AHW521758Z2 L/R 5 683 713 793 879 993 1104 1185
Width 5 cm
Divided over front height 33.0 and 62.75 cm
150,65 with recessed handle

26,25 Please state the relevant L/R.

33,0 The end panel width is always 5 cm.

Diagram shows L

Tall unit end panel Carcase height 217.15 cm

Front finish Depth up to 62.5 cm
62,75 wall-bound solution (one-sided) AHW521758X L/R 5 608 638 718 803 917 1029 1111
Width 5 cm
Divided over front height 150.65 cm
with recessed handle

Please state the relevant L/R.

150,65 The end panel width is always 5 cm.

Diagram shows L

Price group
Blenders

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Tall unit blender Carcase height 217.15 cm
Front finish AHP20217 L/R 20 115 127 131 143 164 182 189

Front finish blenders are manufactured with a maximum

20 cm width.

216,9

Diagram shows L

Divided blender .
Divided over front height 33.0 cm AANBT33 39
with recessed handle

Divided over front height 62.75 cm AANBT66 39

with recessed handle

Divided over front height 150.65 cm AANBT150 39

with recessed handle

Suitable for blenders.

53.10 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Tall unit corner blender 90° Carcase height 217.15 cm
Front finish AHPE217 10 221 246 259 283 323 360 370
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.
216,9

4
4

Extra charge AMPHP5 5 34 36 36 41 45 49 67

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 217.15 cm

Front finish AHPEW217 10 236 263 277 297 336 374 385
Freely selectable angle up to max. 270°
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
216,9 from l to r on order.

3
3

Extra charge AMPHP5 5 34 36 36 41 45 49 67

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided corner blender AANEBT33 61 73 94 110 125 140 196

additional height division 33.0 cm from
bottom edge, recessed handle continuous
with internal mitre

Suitable for 90° corner blenders and

corner blenders.

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

1/2022 53.11
 Surface style
Support panels with plinth Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MC H
Support panel with plinth AHWSP21756 L/R 56 233 233 469 618 682 745 851 663
for blender AHWSP21766 L/R 66 256 256 540 711 780 848 965 760
Thickness 1.6 cm
prepared for connection to
tall unit blenders with
recessed handle milling

Only as accessory type for blenders AHP ..,

not available loose!
For use next to appliances or an open niche.
Visible side facing the appliance or the open niche,
Diagram shows R
please state left/right version.

Support panel with plinth up to

Thickness 1.6 cm HWS21758 L/R 63 206 206 443 593 658 723 829 633
both sides finished HWS21768 L/R 70 234 234 502 673 750 827 946 728

Please state required depth.

Please state whether placed L/R and plinth height.
Fit plinth return (7 mm) on site.
Plinth height 1.5 cm larger for floor adjustment.

Diagram shows R

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 217.15 cm
flush with carcase HSB20217 20 62 68 77 102 110 117 139 96

Price group
Rear panels
Front finish
Neutral

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Rear panel in per metre
front finish charge per started 10 cm
Texture direction as front Front line 66 cm
in variable sizes RWF217Y 505 574 678 857 1064 1269 1430
Height up to 216.9 cm
150,65 Max. width 120 cm
without recessed handle
with loose plinth
66,0
Minimum charged 0.5 metres.

Rear panel in Front line 66 cm

front finish RWF30217Y 30 260 284 326 396 501 606 675
in fixed front sizes RWF45217Y 45 277 306 367 452 556 662 739
without recessed handle RWF50217Y 50 280 320 377 476 591 704 795
with loose plinth RWF60217Y 60 294 346 410 517 651 784 874
150,65 For carcase height 217.15 cm old RW .. 217 Y

66,0

53.12 1/2022
AVANCE
Modular housing units / Top cupboards

CARCASE LINE 80

Modular housing units - Planning tips 54. 01

Basic units for modular housing units - Carcase heights 154.15 / 190.65 / 203.9 / 217.15 cm, carcase depth 56 cm 54. 02

Modules Below - open below appliance niche 54. 02-03

Modules Below - below appliance niche with door 54. 03

Modules Below - Appliance niche with door, open below appliance niche 54. 04

Modules Appliance niche (open) - below touch opening 54. 04

Modules Appliance niche (open) - with recessed handle and blender 54. 05

Modules Appliance niche with door - Modular housing units 54. 06-07

Modules Above for recessed handle - Modules heights 33, 36, 50, 54, 63, 68, 81 and 93 cm 54. 07-08

Modules Above with touch opening - Modules heights 27, 40, 53, 66, 80 and 93 cm 54. 08

Tall unit top cupboards - Carcase height 26.5 / 39.75 / 53.0 cm, carcase depth 56 cm 54. 09

Visible carcase sides - Modular housing units 54. 10

Blenders - Modular housing units 54. 11-12

Modular tall units /

Blenders - Modular housing units 54. 12

Top cupboards
54.

1/2022 54.
 AVANCE
Modular housing units / Top cupboards
T: Cupboard depth cm
H: Cupboard height cm

Basic units Modules Below Modules Appliance niche Modules Above

54.02 T: 58 cm 54.02-54.04 54.04 54.07-54.08

AMU 60 ... AMGN 60 ... AMO 60 ...
H: 154 cm
AHGM 60 154
AHGM 76 154
H: 190 cm
AHGM 60 190
AHGM 76 190
H: 204 cm
AHGM 60 204 54.06
AHGM 76 204 AMGT 60 ...
H: 217 cm
AHGM 60 217
AHGM 76 217
Modular tall units /
Top cupboards

54.

Top cupboards
54.09 T: 36 / 48 / 58 cm 54.09 T: 36 / 48 / 58 cm 54.09 T: 36 / 48 / 58 cm
AHAK 30 27 S AHA 30 40 S AHA 30 53 S
AHAK 45 27 S AHA 45 40 S AHA 45 53 S
AHAK 50 27 S AHA 50 40 S AHA 50 53 S
AHAK 60 27 S AHA 60 40 S AHA 60 53 S
AHAK 90 27 S

54.09 T: 36 / 48 / 58 cm 54.09 T: 36 / 48 / 58 cm
AHA 90 40 S AHA 90 53 S

54.09 T: 36 / 48 / 58 cm
AHAK 30 40 S
AHAK 45 40 S
AHAK 50 40 S
AHAK 60 40 S
AHAK 90 40 S

54. 1/2022
AVANCE Modular housing units - Planning tips

CARCASE LINE 80

1. Choice of basic cupboard The basic cupboard is the building block in kitchen planning and
is described by planning measurements (height, width and depth).
• All tall unit heights are available
• Modular housing units are available with 60 cm and 76 cm width

Relevant to the use, the basic cupboard will be stocked with modules:

Examples:

Modular housing units

AHGM 60 XXX (XXX = cupboard height)

Appliance position below / middle / above

Module above AMO 60 40 ... S AMO 60 53 ... S

CMO...
AMO 60 50 ... AMO 60 54 ... Adjustment through
door/lift-up door

AMGT 60 96 AMGN 60 84 D
Module niche
e.g. 204 cm

e.g. 204 cm

CMGN / CMGT...
AMGT 60 96 AMGN 60 78 B

Adjustment through
blender/drawer

Grip ha
ndle 62
,75 cm
Module below AMU 60 63 ... AMU 6083
CMU 60 70B...
B...
CMU...
Grip h
andle
33,0
cm
AMU 60 63 ... AMU 60 70 B...

Summary of the modules = height of basic cupboard

(e.g. 204 cm). Permitted deviation +/- 6 cm
because of the rounded module-planning dimensions.

2. Selecting the modules • Determining height and furnishing of the lower module AMU… or For further examples of modular configurations, see standard tall
AMGT… Considerations are the ergonomically desired position of units, chapter 50. to 53.
the appliance (module height) and the line layout of the adjoining The difference between module-planning dimension AMGN... and
cupboards (front divisions). the respectively necessary appliance niche, is adjusted with front
• Appliance niche. For the respective appliance type and its neces- blenders for frame programmes. All other programmes in 2-dimen-
sary niche, the appropriate module with door AMGT… or without sional design have a dimensionally adjusted upper front (AMO…)
door AMGN… is selected. with front coloured thick-edge end adjacent the appliance.
• Choice of the upper module AMO…. The upper module is de- When using 2 appliances, add the thickness of 2 cm for a middle
termined from the rest by the dimensions of the various module shelf according to the construction of the overall niche height. With
heights. appliances that can be stacked or when using bearing rails GUWIN
The following applies for planning programmes: based on the cal- the 2 cm addition is not necessary.
culated remainder of the measurement, the next smaller module
AMO ... must be selected!

All basic cupboards and module variants can be found on the fol-
lowing pages.

1/2022 54.01
 Price group
Basic units for modular housing units
Carcase heights 154.15 / 190.65 / 203.9 / 217.15 cm, carcase depth 56 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Basic unit Carcase height 154.15 cm
for furnishing with modules AHGM60154 60 239 239 239 239 239 239 239
AMU 60 ..., AMGT 60 ..., AMGN 60 ... AHGM76154 76 395 395 395 395 395 395 395
and AMO 60 ...
Carcase height 190.65 cm
Please use the 76 cm wide basic unit for the 60 cm wide AHGM60190 60 261 261 261 261 261 261 261
modules. These will be adapted to the 76 cm width at the AHGM76190 76 417 417 417 417 417 417 417
factory without extra charge.
Width alterations of between 60 cm up to 76 cm are Carcase height 203.9 cm
charged with the price AHGM 76 .. . AHGM60204 60 268 268 268 268 268 268 268
AHGM76204 76 424 424 424 424 424 424 424

Carcase height 217.15 cm

AHGM60217 60 277 277 277 277 277 277 277
AHGM76217 76 433 433 433 433 433 433 433

Price group
Modules Below
open below appliance niche

Neutral
Modules heights 40, 50, 70, 80 and 100 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Module Below 40 AMU6040BZ 60 385 424 449 479 565 648 688
module height 40 cm
1 blender 3.5 cm
1 recessed handle 3.5 cm
1 pullout

Module Below 50 AMU6050SZ 60 492 543 575 614 723 830 884
module height 50 cm
1 drawer
1 recessed handle 3.5 cm
1 pullout

Module Below 70 AMU6070BT L/R 60 299 332 351 372 440 508 538
module height 70 cm
1 blender 3.5 cm
1 recessed handle 3.5 cm
1 door
Diagram shows L 2 adjustable shelves

Module Below 70 AMU6070BZ 60 404 448 474 505 595 683 726
module height 70 cm
1 blender 3.5 cm
1 recessed handle 3.5 cm
1 pullout

Module Below 70 AMU6070BZIZ 60 586 648 686 732 859 990 1053
module height 70 cm
1 blender 3.5 cm
1 recessed handle 3.5 cm
1 pullout
1 inner pullout

Module Below 70 AMU6070BZ2 60 659 726 769 822 967 1112 1181
module height 70 cm
1 blender 3.5 cm
2 recessed handles, 3.5 cm each
2 pullouts

Module Below 70 AMU6070BS2Z 60 835 922 975 1041 1225 1409 1497
module height 70 cm
1 blender 3.5 cm
2 recessed handles, 3.5 cm each
2 drawers
1 pullout

Module Below 80 AMU6080ST L/R 60 413 456 482 517 606 695 740
module height 80 cm
1 drawer
1 recessed handle 3.5 cm
1 door
Diagram shows L 2 adjustable shelves

54.02 1/2022
 Price group
Modules Below
open below appliance niche

Neutral
Modules heights 40, 50, 70, 80 and 100 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Module Below 80 AMU6080SZ 60 520 573 607 648 762 876 931
module height 80 cm
1 drawer
1 recessed handle 3.5 cm
1 pullout

Module Below 80 AMU6080SZIZ 60 699 772 818 873 1026 1180 1252
module height 80 cm
1 drawer
1 recessed handle 3.5 cm
1 pullout
1 inner pullout

Module Below 80 AMU6080SZ2 60 810 895 948 1013 1190 1367 1454
module height 80 cm
1 drawer
2 recessed handles, 3.5 cm each
2 pullouts

Module Below 80 AMU6080S3Z 60 914 1012 1070 1143 1344 1545 1641
module height 80 cm
3 drawers
2 recessed handles, 3.5 cm each
1 pullout

Module Below 100 AMU60100BT L/R 60 343 382 403 428 506 581 616
module height 100 cm
1 blender 3.5 cm
1 recessed handle 3.5 cm
1 door
3 adjustable shelves
Diagram shows L

Price group
Modules Below
below appliance niche with door

Neutral
Modules heights 33 and 63 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Module Below 33 AMU6033Z 60 312 346 365 391 459 527 562
module height 33 cm
1 pullout

Module Below 63 AMU6063T L/R 60 212 231 245 263 308 356 377
module height 63 cm
1 door
2 adjustable shelves
Diagram shows L

Module Below 63 AMU6063Z 60 311 345 362 390 458 525 559
module height 63 cm
1 pullout

Module Below 63 AMU6063ZIZ 60 479 526 559 597 700 805 854
module height 63 cm
1 pullout
1 inner pullout

Module Below 63 AMU6063Z2 60 627 690 732 780 917 1056 1121
module height 63 cm
2 pullouts
1 recessed handle 3.5 cm

Module Below 63 AMU6063S2Z 60 729 804 851 909 1069 1228 1307
module height 63 cm
2 drawers
1 recessed handle 3.5 cm
1 pullout

1/2022 54.03
 Price group
Modules Below
Appliance niche with door, open below appliance niche

Neutral
Modules heights 88, 100, 102, 115, 128 and 140 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Module Below .
Appliance niche with door
1 blender 3.5 cm
1 recessed handle 3.5 cm

Diagram shows L 1 door 81 cm high in front of AMGT6088B L/R 60 278 305 325 347 407 467 498
appliance niche 72 cm
module height 88 cm

1 door 92.5 cm high in front of AMGT60100B L/R 60 290 318 341 359 424 489 520
appliance niche 88 cm
module height 100 cm

1 door 95 cm high in front of AMGT60102B L/R 60 290 318 341 359 424 489 520
appliance niche 88 cm
module height 102 cm

1 door 108 cm high in front of AMGT60115B L/R 60 299 332 351 372 440 508 538
appliance niche 103 cm
module height 115 cm

1 door 121 cm high in front of AMGT60128B L/R 60 313 347 367 393 461 529 565
appliance niche 103 cm
module height 128 cm

1 door 133 cm high in front of AMGT60140B L/R 60 321 355 375 401 473 545 578
appliance niche 122 cm
module height 140 cm

Price group
Modules Appliance niche (open)
below touch opening

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Module Appliance niche .
(open)

1 appliance niche 33 - 43 cm AMGN6045 60 40 43 45 48 55 61 64

1 appliance niche 44 - 56 cm AMGN6058 60 40 43 45 48 55 61 64

1 appliance niche 57 - 60 cm AMGN6071 60 40 43 45 48 55 61 64

1 appliance niche 82 - 95 cm AMGN6097 60 40 43 45 48 55 61 64

1 appliance niche 96 - 108 cm AMGN60110 60 40 43 45 48 55 61 64

1 appliance niche 109 - 122 cm AMGN60124 60 40 43 45 48 55 61 64

Bracket for appliance per pair

1 pair of steel appliance brackets GUWIN 44
6 x 6 cm, 50 cm long
for receiving appliances
For optimising gaps (min. 0.3 cm)
between two appliances.
Installation on site.

2 appliances can be placed in one niche if

GUWIN is ordered in addition.
For the relevant appliance niche MGN.. both
appliance types must be stated.

Module Appliance double niche .

(open)

1 appliance double niche 66 - 76 cm AMGN6084D 60 40 43 45 48 55 61 64

1 appliance double niche 82 - 95 cm AMGN6097D 60 40 43 45 48 55 61 64

1 appliance double niche 96 - 108 cm AMGN60110D 60 40 43 45 48 55 61 64

1 appliance double niche 109 - 122 cm AMGN60124D 60 40 43 45 48 55 61 64

54.04 1/2022
 Price group
Modules Appliance niche (open)
with recessed handle and blender

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Module Appliance niche .
(open)
1 recessed handle 3.5 cm
1 blender 3.5 cm

1 appliance niche 33 - 43 cm AMGN6052B 60 176 192 208 221 259 296 314

1 appliance niche 44 - 56 cm AMGN6065B 60 176 192 208 221 259 296 314

1 appliance niche 57 - 60 cm AMGN6078B 60 176 192 208 221 259 296 314

1 appliance niche 61 - 74 cm AMGN6081B 60 176 192 208 221 259 296 314

1 appliance niche 82 - 95 cm AMGN60104B 60 176 192 208 221 259 296 314

1 appliance niche 96 - 108 cm AMGN60117B 60 176 192 208 221 259 296 314

1 appliance niche 109 - 122 cm AMGN60131B 60 176 192 208 221 259 296 314

Bracket for appliance per pair

1 pair of steel appliance brackets GUWIN 44
6 x 6 cm, 50 cm long
for receiving appliances
For optimising gaps (min. 0.3 cm)
between two appliances.
Installation on site.

2 appliances can be placed in one niche if

GUWIN is ordered in addition.
For the relevant appliance niche MGN.. both
appliance types must be stated.

Module Appliance double niche .

(open)
1 recessed handle 3.5 cm
1 blender 3.5 cm

1 appliance double niche 66 - 76 cm AMGN6091DB 60 176 192 208 221 259 296 314

1 appliance double niche 82 - 95 cm AMGN60104DB 60 176 192 208 221 259 296 314

1 appliance double niche 96 - 108 cm AMGN60117DB 60 176 192 208 221 259 296 314

1 appliance double niche 109 - 122 cm AMGN60131DB 60 176 192 208 221 259 296 314

1/2022 54.05
 Price group
Modules Appliance niche with door

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Module Appliance niche with .
door
1 recessed handle 3.5 cm

1 door 81 cm high in front of AMGT6084 L/R 60 135 154 163 173 204 234 247
Diagram shows L appliance niche 72 cm

1 door 92.5 cm high in front of AMGT6096 L/R 60 149 166 175 184 219 249 270
appliance niche 88 cm

1 door 95 cm high in front of AMGT6098 L/R 60 149 166 175 184 219 249 270
appliance niche 88 cm

1 door 108 cm high in front of AMGT60111 L/R 60 170 184 195 213 247 285 302
appliance niche 103 cm

1 door 121 cm high in front of AMGT60124 L/R 60 175 190 207 220 255 293 312
appliance niche 103 cm

1 door 124.15 cm high in front of AMGT60128 L/R 60 175 190 207 220 255 293 312
appliance niche 103 cm

1 door 133 cm high in front of AMGT60136 L/R 60 181 203 216 227 271 308 326
appliance niche 122 cm

1 door 137.4 cm high in front of AMGT60141 L/R 60 181 203 216 227 271 308 326
appliance niche 122 cm

2 doors or 1 door 150.65 cm high AMGT60154 L/R 60 305 341 358 384 452 518 549
in front of appliance niche 140 cm

Module Appliance niche with .

door

2 doors or 1 door strap. together 190 cm AMGT60190 L/R 60 408 450 475 508 595 681 726
high in front of appliance niche 178 cm
with special handle
1 support hinge SSCH
when the front projects more than 26 cm
from the appliance

Diagram shows L 2 doors or 1 door strap. together 204 cm AMGT60204 L/R 60 439 482 510 543 639 733 778
high in front of appliance niche 178 cm
with special handle
1 support hinge SSCH
when the front projects more than 26 cm
from the appliance

2 doors or 1 door strap. together 217 cm AMGT60217 L/R 60 485 535 566 603 707 811 860
high in front of appliance niche 178 cm
with special handle
1 support hinge SSCH
when the front projects more than 26 cm
from the appliance

Module Appliance niche with .

door
2 recessed handles, 3.5 cm each

1 door 97.65 cm high in front of AMGT60105 L/R 60 157 171 179 189 226 263 277
appliance niche 88 cm
Diagram shows L
1 door 114 cm high in front of AMGT60121 L/R 60 170 184 195 213 247 285 302
appliance niche 103 cm

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

54.06 1/2022
 Price group
Modules Appliance niche with door

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Support hinge for fridge and freezers ZSSCH 32
with appliance hinge
1 support hinge with base plate
for fitting on site
for additional requirement

For doors with more than 26 cm overhang from the appliance.

Hinge can be used left/right and is fitted after installation of
fridge or freezer.
Delivery includes installation instructions, installation template
and screws.
To be used in combination with fridges and freezers of the
brands: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux,
Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense, LG,
Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung,
Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei

With doors, projecting more than 26 cm from the fridge or freezer, the factory supplies a support hinge to avoid warping of the front. This is the case with
the appliances of the following manufacturers: AEG, Amica, Arcelik, Bauknecht, Bosch, Electrolux, Fisher & Paykel, Gaggenau, GE, Gorenje, Haier, Hisense,
LG, Liebherr, Maytag, Miele, Neff, Panasonic, Sanyo, Samsung, Siemens, Subzero, Teka, Vestel, V-Zug, Whirlpool, Wolf, Xinfei. For appliances of other manu-
facturers the front alignment fitting FRAUSR must be ordered.

Price group
Modules Above for recessed handle
Modules heights 33, 36, 50, 54, 63, 68, 81 and 93 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Module Above 33 AMO6033T L/R 60 110 122 128 134 161 184 195
module height 33 cm
1 door
Diagram shows L

Module Above 33 AMO6033K 60 143 159 168 177 208 235 245
module height 33 cm
1 top hinged door

Module Above 36 AMO6036T L/R 60 110 122 128 134 161 184 195
module height 36 cm
1 door
Diagram shows L

Module Above 36 AMO6036K 60 143 159 168 177 208 235 245
module height 36 cm
1 top hinged door

Module Above 50 AMO6050T L/R 60 128 142 152 163 191 221 231
module height 50 cm
1 door
1 adjustable shelf
Diagram shows L

Module Above 50 AMO6050K 60 163 178 186 199 233 268 282
module height 50 cm
1 top hinged door
1 adjustable shelf

Module Above 54 AMO6054T L/R 60 128 142 152 163 191 221 231
module height 54 cm
1 door
1 adjustable shelf
Diagram shows L

Module Above 54 AMO6054K 60 163 178 186 199 233 268 282
module height 54 cm
1 top hinged door
1 adjustable shelf

Module Above 63 AMO6063T L/R 60 162 176 184 200 235 272 288
module height 63 cm
1 door
2 adjustable shelves

Diagram shows L

1/2022 54.07
 Price group
Modules Above for recessed handle
Modules heights 33, 36, 50, 54, 63, 68, 81 and 93 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Module Above 68 AMO6068T L/R 60 162 176 184 200 235 272 288
module height 68 cm
1 door
2 adjustable shelves

Diagram shows L

Module Above 81 AMO6081T L/R 60 174 189 205 218 253 292 310
module height 81 cm
1 door
2 adjustable shelves

Diagram shows L

Module Above 93 AMO6093T L/R 60 207 225 238 254 300 345 365
module height 93 cm
1 door
3 adjustable shelves

Diagram shows L

Price group
Modules Above with touch opening
Modules heights 27, 40, 53, 66, 80 and 93 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Module Above 27 AMO6027KS 60 124 133 142 152 176 203 218
module height 27 cm
1 top hinged door with „sesame-closure“

Module Above 40 AMO6040TS L/R 60 110 122 128 134 161 184 195
module height 40 cm
1 door with „sesame-closure“
1 adjustable shelf
Diagram shows L

Module Above 40 AMO6040KS 60 152 166 175 184 217 245 263
module height 40 cm
1 top hinged door with „sesame-closure“
1 adjustable shelf

Module Above 53 AMO6053TS L/R 60 128 142 152 163 191 221 231
module height 53 cm
1 door with „sesame-closure“
1 adjustable shelf
Diagram shows L

Module Above 53 AMO6053KS 60 157 169 177 188 222 253 275
module height 53 cm
1 top hinged door with „sesame-closure“
1 adjustable shelf

Module Above 66 AMO6066TS L/R 60 162 176 184 200 235 272 288
module height 66 cm
1 door with „sesame-closure“
2 adjustable shelves

Diagram shows L

Module Above 80 AMO6080TS L/R 60 174 189 205 218 253 292 310
module height 80 cm
1 door with „sesame-closure“
2 adjustable shelves

Diagram shows L

Module Above 93 AMO6093TS L/R 60 207 225 238 254 300 345 365
module height 93 cm
1 door with „sesame-closure“
3 adjustable shelves

Diagram shows L

54.08 1/2022
 Price group
Tall unit top cupboards
Carcase height 26.5 / 39.75 / 53.0 cm, carcase depth 56 cm

Neutral
Cupboard depth 36 / 48 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Tall unit top cupboard AHAK3027S 30 173 177 193 208 243 281 303
Carcase height 26.5 cm AHAK4527S 45 185 191 207 222 263 302 327
1 top hinged door with „sesame-closure“ AHAK5027S 50 188 195 213 229 270 306 336
AHAK6027S 60 194 205 221 239 280 317 345
No wall fixing. AHAK9027S 90 281 307 331 377 433 489 541

Tall unit top cupboard AHA3040S L/R 30 170 175 188 207 242 280 308
Carcase height 39.75 cm AHA4540S L/R 45 178 183 203 222 266 306 343
1 door with „sesame-closure“ AHA5040S L/R 50 181 190 213 230 280 330 349
1 adjustable shelf AHA6040S L/R 60 190 201 223 242 291 338 367
Diagram shows L
No wall fixing.

Tall unit top cupboard AHA9040S 90 271 302 332 377 444 509 577
Carcase height 39.75 cm
2 doors
(right hand door with touch opening)
1 adjustable shelf

No wall fixing.

Tall unit top cupboard AHAK3040S 30 192 199 214 232 270 303 335
Carcase height 39.75 cm AHAK4540S 45 203 209 229 245 290 333 367
1 top hinged door with „sesame-closure“ AHAK5040S 50 207 216 237 251 302 353 372
1 adjustable shelf AHAK6040S 60 216 227 246 268 313 361 393
AHAK9040S 90 297 327 355 419 475 530 601
No wall fixing.

Tall unit top cupboard AHA3053S L/R 30 193 203 225 240 270 295 339
Carcase height 53.0 cm AHA4553S L/R 45 195 209 229 266 297 331 349
1 door with „sesame-closure“ AHA5053S L/R 50 207 215 232 268 318 370 383
1 adjustable shelf AHA6053S L/R 60 213 223 240 280 327 372 403

Diagram shows L No wall fixing.

Tall unit top cupboard AHA9053S 90 308 325 359 429 469 548 628
Carcase height 53.0 cm
2 doors
(right hand door with touch opening)
1 adjustable shelf

No wall fixing.

1/2022 54.09
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 26.5 cm
Side depth 34 cm FS2734 L/R 34 0 0 43 60 90 113 59
Side depth 46 cm FS2746 L/R 46 0 0 52 76 116 145 76
Side depth 56 cm FS2756 L/R 56 0 0 52 76 116 145 76
Side depth 61 cm FS2761 L/R 61 0 0 62 87 134 166 89
Side depth 66 cm FS2766 L/R 66 0 0 62 87 134 166 89
Side depth 76 cm FS2776 L/R 76 0 0 65 93 142 177 93

Carcase height 39.75 cm

Diagram shows R Side depth 34 cm FS4034 L/R 34 0 0 43 63 93 116 60
Side depth 46 cm FS4046 L/R 46 0 0 58 83 122 153 79
Side depth 56 cm FS4056 L/R 56 0 0 58 83 122 153 79
Side depth 61 cm FS4061 L/R 61 0 0 66 97 141 176 92
Side depth 66 cm FS4066 L/R 66 0 0 66 97 141 176 92
Side depth 76 cm FS4076 L/R 76 0 0 70 102 149 186 98

Carcase height 53.0 cm

Side depth 34 cm FS5334 L/R 34 0 0 44 65 93 117 62
Side depth 46 cm FS5346 L/R 46 0 0 65 93 129 161 84
Side depth 56 cm FS5356 L/R 56 0 0 65 93 129 161 84
Side depth 61 cm FS5361 L/R 61 0 0 77 112 158 201 105
Side depth 66 cm FS5366 L/R 66 0 0 77 112 158 201 105
Side depth 76 cm FS5376 L/R 76 0 0 84 122 170 214 110

Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all tall unit top cupboards FSOL L/R 46 46 - - - - -

Leading edge as carcase exterior side.

Visible carcase side with .

depth increase
Carcase height 26.5 cm
Side depth up to 34 cm FSUEL2734 L/R 34 66 66 109 126 156 179 125
Side depth up to 46 cm FSUEL2746 L/R 46 66 66 118 142 182 211 142
Side depth up to 58 cm FSUEL2758 L/R 58 66 66 118 142 182 211 142
Side depth up to 63 cm FSUEL2763 L/R 63 66 66 128 153 200 232 155
Side depth up to 68 cm FSUEL2768 L/R 68 107 107 169 194 241 273 196
Side depth up to 76 cm FSUEL2776 L/R 76 107 107 172 200 249 284 200

Diagram shows R
Carcase height 39.75 cm
Side depth up to 34 cm FSUEL4034 L/R 34 66 66 109 129 159 182 126
Side depth up to 46 cm FSUEL4046 L/R 46 66 66 124 149 188 219 145
Side depth up to 58 cm FSUEL4058 L/R 58 66 66 124 149 188 219 145
Side depth up to 63 cm FSUEL4063 L/R 63 66 66 132 163 207 242 158
Side depth up to 68 cm FSUEL4068 L/R 68 107 107 173 204 248 283 199
Side depth up to 76 cm FSUEL4076 L/R 76 107 107 177 209 256 293 205

Carcase height 53.0 cm

Side depth up to 34 cm FSUEL5334 L/R 34 66 66 110 131 159 183 128
Side depth up to 46 cm FSUEL5346 L/R 46 66 66 131 159 195 227 150
Side depth up to 58 cm FSUEL5358 L/R 58 66 66 131 159 195 227 150
Side depth up to 63 cm FSUEL5363 L/R 63 66 66 143 178 224 267 171
Side depth up to 68 cm FSUEL5368 L/R 68 107 107 184 219 265 308 212
Side depth up to 76 cm FSUEL5376 L/R 76 107 107 191 229 277 321 217

Leading edge as carcase exterior side.

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“.

54.10 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Tall unit blender Carcase height 154.15 cm
Front finish with recessed handle above
AHP20154 L/R 20 117 123 128 133 154 170 209
Front finish blenders are manufactured with a maximum
20 cm width. Carcase height 190.65 cm
AHP20190 L/R 20 95 102 111 117 129 143 148

Carcase height 203.9 cm

AHP20204 L/R 20 100 114 119 127 142 158 161
Diagram shows L
Carcase height 217.15 cm
AHP20217 L/R 20 115 127 131 143 164 182 189

Carcase height 250 cm

AHP20250 L/R 20 159 193 199 220 251 291 311

Tall unit corner blender 90° Carcase height 154.15 cm

Front finish with recessed handle above
freely selectable leg measurement AHPE154 10 218 229 247 260 286 311 384
from 4 x 4 cm to 10 x 10 cm width
Carcase height 190.65 cm
Flush with front. AHPE190 10 194 218 229 240 270 295 304
Please state rear length (inside measurement)
from l to r on order. Carcase height 203.9 cm
AHPE204 10 211 232 248 268 298 330 341
4
Carcase height 217.15 cm
AHPE217 10 221 246 259 283 323 360 370
4

Carcase height 250 cm

AHPE250 10 247 286 295 325 384 438 446

Extra charge AMPHP5 5 34 36 36 41 45 49 67

per 5 cm extra width
(from 10 cm to max. 20 cm)

Tall unit corner blender Carcase height 154.15 cm

Front finish with recessed handle above
Freely selectable angle up to max. 270° AHPEW154 10 229 243 260 275 300 327 402
and freely selectable leg measurement from
3 x 3 cm up to 10 x 10 cm width Carcase height 190.65 cm
AHPEW190 10 201 223 235 242 273 298 307
Flush with front.
Please state rear length (inside measurement) Carcase height 203.9 cm
from l to r on order. AHPEW204 10 216 238 256 271 302 338 343
3
Carcase height 217.15 cm
3

AHPEW217 10 236 263 277 297 336 374 385

Carcase height 250 cm

AHPEW250 10 288 320 327 365 423 464 490

Extra charge AMPHP5 5 34 36 36 41 45 49 67

per 5 cm extra width
(from 10 cm to max. 20 cm)

Divided blender .
Divided over front height 33.0 cm AANBT33 39
with recessed handle

Divided over front height 62.75 cm AANBT66 39

with recessed handle

Divided over front height 150.65 cm AANBT150 39

with recessed handle

Suitable for blenders.

Divided corner blender AANEBT33 61 73 94 110 125 140 196

additional height division 33.0 cm from
bottom edge, recessed handle continuous
with internal mitre

Suitable for 90° corner blenders and

corner blenders.

1/2022 54.11
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
TFA .. Carcase-connection strip ANTFA 26
for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Tall unit blender Carcase height 154.15 cm
flush with carcase HSB20154 20 46 49 53 72 77 82 99 67

Carcase height 190.65 cm

HSB20190 20 53 55 68 87 94 101 118 81

Carcase height 203.9 cm

HSB20204 20 58 60 70 90 98 105 123 83

Carcase height 217.15 cm

HSB20217 20 62 68 77 102 110 117 139 96

Carcase height 230 cm

HSB20230 20 65 71 83 109 117 124 148 102

54.12 1/2022
CONTINO | AVANCE
Wall units

CONTINO

Wall units, carcase heights 39,75 / 53,0 cm 60. Chapter

Wall units, carcase height 66,25 cm 61. Chapter

Wall units, carcase height 79,5 cm 62. Chapter

Wall units, carcase height 92,75 / 119,25 cm 63. Chapter

AVANCE

Wall units, carcase heights 53,0 cm 65. Chapter

CONTINO | AVANCE
Wall units, carcase height 66,25 cm 66. Chapter

Wall units
Wall units, carcase height 79,5 cm 67. Chapter

6.

Wall units, carcase height 92,75 / 119,25 cm 68. Chapter

1/2022 6.
 CONTINO
Wall units – type logic

Article definition Dimension definition Front definition/

function equipment

Wall unit Width / Height / Depth*

CO 60 80 *
CO 60 80
* depth only if different from standard 36 cm

Corner wall unit, inserted Width / Height / Depth*

COEE 90 80
COEE 90 80
* depth only if different from standard 36 cm

Wall unit with sliding doors Width / Height / Depth* T2 2 doors

COSS 160 66 T2
CONTINO | AVANCE

COSS 160 66 T2
* depth only if different from standard 36 cm
Wall units

Article definition Article definition Front definition / function equip-

ment
6. CO wall unit AO wall unit
COE corner wall unit with angled door AOAW end wall unit with angled door BL blender
COED diagonal corner wall unit 135º AOE corner wall unit with angled door BLH blender horizontally divided
COEE corner wall unit, inserted AOED diagonal corner wall unit 135º BLV blender vertically divided
COFK wall unit with folding flaps AOEE corner wall unit, inserted D prepared for appliance
COFT wall unit with folding doors AOFT wall unit with folding doors DE extractor
COHD wall unit for extractor AOFK folding-flaps wall unit I Interior+
COHDFK wall unit with fold-up doors for extractor AOHD wall unit for extractor PG programme glass front
COHDSK swing flap door wall unit for extractor AOHDFK wall unit with fold-up doors for extractor T2 2 doors
COHS extractor wall unit AOHDSK swing flap door wall unit for extractor
COHSK extractor wall unit with flap AOHS extractor wall unit
COHSSK extractor wall unit with swing flaps AOHSSK extractor wall unit with swing flaps
COK wall unit with flaps AOK wall unit with flaps
COM microwave wall housing unit AOM wall housing unit for microwave
COP wall unit blender AOP wall unit blender
COPE wall unit corner blender AOPE wall unit corner blender
COPEW wall unit corner blender 135º AOPEW wall unit corner blender 135º
COSS wall unit with sliding doors (segmented) AO3R wall shelf unit
COSK wall unit with swing flaps AOSS wall unit with sliding doors (segmented)
COW wall unit end panel AOW wall unit end panel
OR wall shelf unit
O3R wall shelf unit

6. 1/2022
Corner solutions
Planning tips

90° Corner solution with inserted corner wall units A

Floor space according to door width
81,7 cm (78 - 94 cm)
Inserted corner wall units can be planned in a cupboard run via the door width as 1,7 cm 91,7 cm (88 - 104 cm)

dimensional compensation. They have a predefined floor space with a fixed interior
blender and a corner blender COPEEW 8 (7.7 x 7.7 cm). By altering the leg length
of the corner blender, floor space A and planning depth B can be adjusted. The 80 / 90 cm
B
corner unit is positioned with a 1.7 cm clearance to the wall. Please state the exact 41,7 cm 7,7 cm 34 cm
measurements on the order. The leg lengths are adjusted at the factory.
0,2 cm
Please note: The leg lengths of the corner blender from 4 cm – 10 cm width are free 1,8 - 2,1 cm
7,7 cm
to choice. For widths of more than 10 cm there will be an extra charge MP TP 5 (calcu- Door width
lated for each started 5 cm per leg length). 40 cm
50 cm

34cm

90º corner solution “fixed measurement” 60 65

Corner units of this style specify two fixed cupboard lengths. For special planning situ-
ations the choice lies between cupboards with folding doors or with two single doors.
60

65
Protruding elements such as extractors etc. must not be planned into the front elevation.

COE 60 ... COE 65 ...

Minimum distance

Wall units with fold-up doors 21,5

Please allow at least 21.5 cm free space above the cupboard. By using the provided
opening inhibitor, the measurement is reduced to 12 cm.
Electric drive mechanism see page 10.12. 41
34

Swing flap door wall units

66
52,75
Allow at least 18 cm space above the cupboard. 18
9
Electric drive mechanism see page 10.12. max. 4

40,5
53
34
36,2

1/2022 6.01
Corner solutions
Planning tips

90° Corner solution with inserted corner wall units A

Floor space according to door width
81,7 cm (78 - 94 cm)
Inserted corner wall units can be planned in a cupboard run via the door width as 1,7 cm 91,7 cm (88 - 104 cm)

dimensional compensation. They have a predefined floor space with a fixed interior
blender and a corner blender AOPEEW 8 (7.7 x 7.7 cm). By altering the leg length
of the corner blender, floor space A and planning depth B can be adjusted. The 80 / 90 cm
B
corner unit is positioned with a 1.7 cm clearance to the wall. Please state the exact 41,7 cm 7,7 cm 34 cm
measurements on the order. The leg lengths are adjusted at the factory.
0,2 cm
Please note: The leg lengths of the corner blender from 4 cm – 10 cm width are free 1,8 - 2,0 cm
7,7 cm
to choice. For widths of more than 10 cm there will be an extra charge MP TP 5 (calcu- Door width
lated for each started 5 cm per leg length). 40 cm
50 cm

34cm

90º corner solution “fixed measurement” 60 65

Corner units of this style specify two fixed cupboard lengths. For special planning situ-
ations the choice lies between cupboards with folding doors or with two single doors.
60

65
Protruding elements such as extractors etc. must not be planned into the front elevation.

AOE 60 ... AOE 65 ...

Minimum distance

Wall units with fold-up doors 21,5

Please allow at least 21.5 cm free space above the cupboard. By using the provided
opening inhibitor, the measurement is reduced to 12 cm.
Electric drive mechanism see page 10.12. 41
34

Swing flap door wall units

66
52,75
Allow at least 18 cm space above the cupboard. 18
9
Electric drive mechanism see page 10.12. max. 4

40,5
53
34
36,2

6.02 1/2022
Wall units with extractor hood ELICA
Planning tips

This extractor unit with appliance offers you a complete Module

for the starter price. Extractor and cupboard are constructively
coordinated thus giving the kitchen user a larger storage space.
The appliance is adjustable in three fan speeds and comprises
2 LED lights in neutral white (4000 K). An air recirculating set for
on-site conversion of the extractor is optionally available.
The cupboard is factory-prepared for easy installation.

Appliance description Edge extraction around glass blender

Foldable glass blender (vapour protection)
Adjustment via rotary switch
Duct connection diameter 15 cm
Fan speed 272 - 647 m³/h
Sound pressure 55 - 68 dB(A)
Electrical data 220/240 V, 260 Watt, 50 Hz
The appliance is arranged for air extraction
Energy efficiency class B

1/2022 6.03
1/2022
 39.75 / 53.0 cm
CONTINO

Wall units
Wall units, carcase height 39.75 / 53.0 cm

CONTINO
60.

Wall units - Carcase height 39.75 cm, carcase depth 34 cm 60. 01

Wall units for extractor - Carcase height 39.75 cm, carcase depth 34 cm 60. 01

Wall shelf units - Carcase height 39.75 cm, shelf unit depth 36.2 cm 60. 01

Wall shelf units, thick 2.8 cm - Carcase height 39.75 cm, shelf unit depth 36.2 cm 60. 02

Wall units - Carcase height 53.0 cm, carcase depth 34 cm 60. 02

Corner wall units - Carcase height 53.0 cm, carcase depth 34 cm 60. 03

Wall units for extractor - Carcase height 53.0 cm, carcase depth 34 cm 60. 03-04

Wall units with extractor ELICA - Carcase height 53.0 cm, carcase depth 34 cm 60. 04

Swing flap door wall units - Carcase height 53.0 cm, carcase depth 34 cm 60. 05

Wall units with sliding doors - Carcase height 53.0 cm, carcase depth 34 cm 60. 05

Wall shelf units - Carcase height 53.0 cm, shelf unit depth 36.2 cm 60. 06

Wall shelf units, thick 2.8 cm - Carcase height 53.0 cm, shelf unit depth 36.2 cm 60. 06

Visible carcase sides - Wall units, carcase height 39.75 / 53.0 cm 60. 06

End panels - Width 5 cm 60. 07

Blenders - Wall units, carcase height 39.75 / 53.0 cm 60. 07-08

Blenders - Wall units, carcase height 39.75 / 53.0 cm 60. 08

Original fronts - Wall units, carcase height 39.75 / 53.0 cm 60. 08

1/2022 60.
39.75 / 53.0 cm CONTINO
Wall units

Wall units, carcase height 39.75 / 53.0 cm

CONTINO

T: Cupboard depth cm
H: Cupboard height cm

60.
Carcase height 40 cm Carcase height 53 cm Extractor units Swing flap door

60.01 T: 36 cm 60.02 T: 36 cm 60.03 T: 36 cm 60.05 T: 36 cm

CO 30 40 CO 30 53 COHS 60 53 COSK 45 53
CO 40 40 CO 40 53 COSK 50 53
CO 45 40 CO 45 53 COSK 60 53
CO 50 40 CO 50 53 COSK 80 53
CO 60 40 CO 60 53 COSK 90 53
COSK 100 53
COSK 120 53
60.01 T: 36 cm 60.02 T: 36 cm 60.03 T: 36 cm 60.05 T: 36 cm
CO 80 40 CO 80 53 COHS 90 53 COSKS 150 53
CO 90 40 CO 90 53
CO 100 40 CO 100 53

60.01 T: 36 cm 60.02 T: 36 cm 60.03 T: 36 cm 60.05 T: 36 cm

COK 30 40 COK 30 53 COHS 90 53 M COSKS 180 53
COK 40 40 COK 40 53
COK 45 40 COK 45 53
COK 50 40 COK 50 53
COK 60 40 COK 60 53
COK 80 40 COK 80 53
COK 90 40 COK 90 53
COK 100 40 COK 100 53
COK 120 40 COK 120 53 60.03 T: 36 cm 60.05 T: 36 cm
COHSK 90 53 COSKS 200 53
60.02 T: 36 cm COHSK 100 53
COM 50 53 COHSK 120 53
COM 60 53

Extractor units
60.03 T: 36 cm
COHS 90 53 BL
60.01 T: 36 cm COHS 100 53 BL
COHS 60 40 COHS 120 53 BL

Sliding doors
Corner units
60.04 T: 36 cm 60.05 T: 36 cm
COHD 60 53 COSS 120 53 T2
60.01 T: 36 cm 60.03 T: 36 cm COSS 160 53 T2
COHS 60 40 BL COEE 80 53 COSS 180 53 T2
COHS 90 40 BL COEE 90 53

60.04 T: 36 cm
COHD 90 53

Shelves
Shelves
60.04 T: 36 cm 60.06 T: 36 cm
COHD 60 53 D OR 30 53
60.01 T: 36 cm OR 40 53
OR 30 40 OR 45 53
OR 40 40 OR 50 53
OR 45 40 OR 60 53
OR 50 40 OR 90 53
OR 60 40
OR 90 40
60.04 T: 36 cm 60.06 T: 36 cm
COHD 90 53 D O3R 30 53
60.02 T: 36 cm COHD 120 53 D O3R 60 53
O3R 30 40 O3R 90 53
O3R 60 40
O3R 90 40

60.04 T: 36 cm
COHD 60 53 DE

60.04 T: 36 cm
COHD 90 53 DE
COHD 120 53 DE

60. 1/2022
 Price group
Wall units
Carcase height 39.75 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit CO3040 L/R 30 170 178 186 222 240 259 295 323
1 door CO4040 L/R 40 174 182 196 233 260 285 314 344
1 adjustable shelf CO4540 L/R 45 176 184 204 238 271 298 326 354
1 grip profile in the lower shelf CO5040 L/R 50 178 186 209 243 279 310 335 364
CO6040 L/R 60 182 199 215 255 287 317 349 382
Diagram shows L

Wall unit CO8040 80 266 291 313 385 434 482 549 599
2 doors CO9040 90 276 295 335 400 451 499 571 621
1 adjustable shelf CO10040 100 283 301 338 406 475 543 584 636
1 grip profile in the lower shelf

Flap wall unit COK3040 30 220 227 240 276 295 313 351 383
1 top hinged door COK4040 40 222 232 244 288 311 335 370 403
1 adjustable shelf COK4540 45 223 234 255 288 314 342 378 413
1 grip profile in the lower shelf COK5040 50 225 235 256 290 325 358 390 425
COK6040 60 233 251 261 310 344 376 401 439
Electric drive mechanism see page 10.12. COK8040 80 329 353 364 442 475 511 549 599
With 120 cm width with centre panel and COK9040 90 369 410 431 504 550 598 652 710
2 adjustable shelves. COK10040 100 408 439 480 528 591 652 696 760
COK12040 120 462 499 557 603 669 736 790 859

Price group
Wall units for extractor
Carcase height 39.75 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit for extractor COHS6040 L/R 60 281 285 299 357 385 409 456 498
installation height up to 37.5 cm
1 door
up to 1 shelf, 8.5 cm deep
Diagram shows L 1 construction shelf

Only possible with touch opening.

Wall unit for extractor COHS6040BL 60 281 285 299 357 385 409 456 498
1 removable front blender COHS9040BL 90 365 382 402 419 462 507 547 596

Necessary to state appliance.

Necessary to state appliance.

Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)
Cupboard division dependent on appliance.

Surface style
Wall shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 39.75 cm, shelf unit depth 36.2 cm

Neutral

FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit OR3040 10-30 163 185 197 230 - 257 293 248
1 adjustable shelf OR4040 30-40 184 206 229 292 - 327 372 307
OR4540 40-45 194 218 246 327 - 363 413 342
Widths in mm grid variably available. OR5040 45-50 205 227 264 359 - 396 455 374
Please state desired width. OR6040 50-60 225 249 297 421 - 465 535 438
OR9040 60-90 287 313 397 612 - 673 777 628

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.
If the exterior of the shelves is requested to be the same colour as the inside, please confirm type AN EINREG.

1/2022 60.01
 Surface style
Wall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 39.75 cm, shelf unit depth 36.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit, O3R3040 10-30 212 232 238 315 330 344 388 347
thick 2.8 cm O3R6040 30-60 267 295 342 476 499 522 584 511
back panel with circumferential shadow joint O3R9040 60-90 322 358 446 637 669 700 780 675
and suspension fixing

Shelf unit interior colour = shelf unit exterior colour.

Widths in mm grid variably available.
Please state desired width.

Price group
Wall units
Carcase height 53.0 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit CO3053 L/R 30 170 179 193 233 255 281 312 341
1 door CO4053 L/R 40 176 185 207 243 272 295 336 365
1 adjustable shelf CO4553 L/R 45 177 188 213 248 278 302 347 378
1 grip profile in the lower shelf CO5053 L/R 50 182 189 215 253 283 316 352 385
CO6053 L/R 60 185 201 217 272 304 341 370 403

Diagram shows L

Wall unit CO8053 80 268 292 317 386 445 494 555 605
2 doors CO9053 90 277 295 340 400 452 505 582 634
1 adjustable shelf CO10053 100 286 307 343 416 485 550 610 666
1 grip profile in the lower shelf

Interior+ spice jar swing-out frame IPGR L/R 237

2 fixed profile shelves
height 37.9 cm, width 37.9 cm,
depth 9 cm
Cupboard prepared for on-site installation

Available for standard wall units from

Diagram shows L 50 cm width and from 53 cm height.
Turning position as hinged side of door.
For two-door cupboards, state hinged side
right or left.

Interior+ glass railing insert IPGRE 38

1 insert with glass railing
height 7.7 cm, width 34.8 cm

For use with Interior+ spice jar swing-out frame.

Flap wall unit COK3053 30 226 233 249 284 304 327 367 400
1 top hinged door COK4053 40 227 237 260 294 324 352 386 419
1 adjustable shelf COK4553 45 232 239 272 303 332 358 397 433
1 grip profile in the lower shelf COK5053 50 235 241 273 305 343 378 405 444
COK6053 60 239 251 278 318 353 386 421 459
Electric drive mechanism see page 10.12. COK8053 80 321 346 376 451 501 551 620 676
With 120 cm width with centre panel and COK9053 90 367 401 448 475 547 611 683 744
2 adjustable shelves. COK10053 100 413 449 498 524 591 656 734 799
COK12053 120 474 511 576 603 671 737 824 899

Wall unit microwave housing COM5053 50 218 230 234 263 280 299 317 346
1 blender COM6053 60 222 237 237 269 296 323 342 372
1 appliance niche

For microwave (built-in trim kit

will be necessary).
Please state appliance model on order!

60.02 1/2022
 Price group
Corner wall units
Carcase height 53.0 cm, carcase depth 34 cm

Neutral
Please note planning instructions on page 60.01!

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Corner wall unit .
Planning depth 41.7 cm Door width 40 cm
Planning dimension 81.7 cm (78 - 94 cm) COEE8053 L/R 80 292 323 352 421 472 522 560 610
Door width 50 cm
Planning dimension 91.7 cm (88 - 104 cm) COEE9053 L/R 90 323 354 390 476 515 551 607 662
1 door
1 adjustable shelf
1 inner blender with angle blender COPEEW853 8 0 0 0 0 0 0 0 0
Diagram shows L adjustable from 4 to 10 cm
1.7 Actual space Extra charge per 5 cm additional CMPTP5 5 6 8 8 8 11 14 14 16
width (up to max. 20 cm)
Pl.depth

34 80/90

7.7 Only possible with touch opening.

Door width Attention: imperative to state the actual planning
measurement. The angle blender COPEEW 8 .. is
adjusted at factory.

Price group
Wall units for extractor
Carcase height 53.0 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit for extractor COHS6053 L/R 60 323 338 351 415 450 482 529 578
1 door
up to 2 shelves, 8.5 cm deep
1 construction shelf

Diagram shows L Only possible with touch opening.

Wall unit for extractor COHS9053 90 445 466 496 585 642 698 776 845
2 doors
up to 2 shelves, 8.5 cm deep
1 construction shelf

Only possible with touch opening.

Wall unit for extractor COHS9053M 90 552 575 605 696 758 813 891 953
2 doors
up to 2 shelves, 8.5 cm deep
1 construction shelf
2 centre panels
1 each adjustable shelf right and left

Only possible with touch opening.

Wall unit for extractor COHSK9053 90 495 518 547 635 692 749 826 901
1 top hinged door COHSK10053 100 522 543 574 663 720 776 851 926
up to 2 shelves, 8.5 cm deep COHSK12053 120 604 631 670 777 848 917 1015 1106
1 construction shelf
2 centre panels
1 each adjustable shelf right and left

Only possible with touch opening.

Electric drive mechanism see page 10.12.

Wall unit for extractor COHS9053BL 90 414 437 476 543 596 646 692 754
1 removable front blender COHS10053BL 100 440 464 503 571 620 671 720 783
COHS12053BL 120 522 551 600 682 750 817 883 963
Necessary to state appliance.

Necessary to state appliance.

Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)
Cupboard division dependent on appliance.

1/2022 60.03
 Price group
Wall units for extractor
Carcase height 53.0 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit for extractor COHD6053 L/R 60 323 338 351 415 450 482 529 578
1 door
1 hose covering above intermediate shelf
1 fixed shelf
Diagram shows L
1 inner blender
1 shelf below according to appliance
requirement

Only possible with touch opening.

Wall unit for extractor COHD9053 90 445 466 496 585 642 698 776 845
2 doors
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender in two parts
1 shelf below according to appliance
requirement

Only possible with touch opening.

Smaller appliances can also be positioned eccentrically.

The hose covering above the intermediate shelf can be individually positioned and adjusted on site.
Only intended for installation of ventilation components.
Necessary to state appliance.
Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)

Wall unit for extractor COHD6053D L/R 60 333 355 378 459 510 565 609 720
1 door
1 fixed shelf

Diagram shows L Only possible with touch opening.

Necessary to state appliance.

Wall unit for extractor COHD9053D 90 425 452 510 594 664 735 841 977
2 doors COHD12053D 120 545 573 682 760 873 965 1136 1313
1 fixed shelf

Only possible with touch opening.

Necessary to state appliance.

Permitted appliances:
Elica: BOXIN PLUS, GLASSOUT, FILO, INSIDE
Falmec: MOVE, VIRGOLA
Novy: FUSION PRO

Price group
Wall units with extractor ELICA
Carcase height 53.0 cm, carcase depth 34 cm
Neutral

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Wall unit with extractor COHD6053DE L/R 60 591 605 619 670 701 736 763 832
1 door
1 fixed shelf
1 extractor 34 cm deep
Diagram shows L
Only possible with touch opening.
Appliance description see page 60.03.

Wall unit with extractor COHD9053DE 90 689 705 741 794 838 882 948 1033
2 doors COHD12053DE 120 866 884 952 1000 1070 1128 1235 1345
1 fixed shelf
1 extractor 34 cm deep

Only possible with touch opening.

Appliance description see page 60.03.

Recirculating set DEUMS 58

Set for on-site conversion
consisting of:
1 air circulation filter
1 recirculation pipe with ventilation grille

60.04 1/2022
 Price group
Swing flap door wall units
Carcase height 53.0 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Swing flap door wall unit COSK4553 45 374 386 407 445 470 499 542 591
1 swing flap door COSK5053 50 379 387 413 451 477 506 547 596
1 adjustable shelf COSK6053 60 384 398 418 466 503 536 567 617
1 grip profile in the lower shelf COSK8053 80 460 480 509 565 607 650 686 748
COSK9053 90 498 523 553 615 662 706 746 812
With 120 cm width with centre panel and COSK10053 100 537 565 599 666 714 763 804 877
2 adjustable shelves. COSK12053 120 610 650 688 765 822 878 922 1006

Swing flap door wall unit COSKS15053 L/R 150 823 857 909 1004 1103 1115 1181 1286
consisting of:
Not available in ALURO-C, BOSSA-C, MINERA-C, TOCCO-C
1 swing flap door
1 carcase COSK 90 53
1 carcase COSK 60 53
1 adjustable shelf per carcase
1 grip profile in the lower shelf

The positioning of the widest carcase is

determined by the style L/R.

Swing flap door wall unit COSKS18053 180 926 975 1033 1149 1258 1270 1342 1464
consisting of:
Not available in ALURO-C, BOSSA-C, MINERA-C, TOCCO-C
1 swing flap door
2 carcases COSK 90 53
1 adjustable shelf per carcase
1 grip profile in the lower shelf

Swing flap door wall unit COSKS20053 200 1001 1054 1117 1242 1359 1370 1448 1578
consisting of:
Not available in ALURO-C, BOSSA-C, MINERA-C, TOCCO-C
1 swing flap door
2 carcases COSK 100 53
1 adjustable shelf per carcase
1 grip profile in the lower shelf

Allow at least 18 cm space above the cupboard.

Electric drive mechanism see page 10.12.

Swing flap door wall units from 150 cm width can be reduced in cupboard module free of charge.

Price group
Wall units with sliding doors
Carcase height 53.0 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit with sliding doors COSS12053T2 120 1389 1405 1420 1480 1522 1563 1596 1741
consisting of: COSS16053T2 160 1506 1526 1549 1619 1671 1722 1765 1924
2 sliding doors on one front level COSS18053T2 180 1593 1620 1646 1731 1791 1851 1907 2079
1 carcase, left in half the planning width
Cupboard width 120, 160, 180 cm:
1 carcase, right in half the planning width
Not available in IOS-C, IOS-M-C
1 adjustable shelf per carcase
1 fitting-set for on-site installation
1 grip profile in the lower shelf

Sliding doors in closed position on one level.

Guide-fitting on top shelf, top cupboard not possible.
Installation space above at least 3 cm.
The cupboard is supplied in separate modules.
Width alterations not possible!

1/2022 60.05
 Surface style
Wall shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 53.0 cm, shelf unit depth 36.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit OR3053 10-30 181 203 231 288 - 321 367 312
1 adjustable shelf OR4053 30-40 206 228 269 351 - 392 447 375
OR4553 40-45 218 242 289 385 - 428 488 410
Widths in mm grid variably available. OR5053 45-50 231 253 309 417 - 462 530 443
Please state desired width. OR6053 50-60 255 279 348 480 - 532 611 509
OR9053 60-90 327 357 465 669 - 742 854 707

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.
If the exterior of the shelves is requested to be the same colour as the inside, please confirm type AN EINREG.

Surface style
Wall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 53.0 cm, shelf unit depth 36.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit, O3R3053 10-30 239 261 286 365 382 398 449 401
thick 2.8 cm O3R6053 30-60 310 336 405 541 568 595 670 584
back panel with circumferential shadow joint O3R9053 60-90 381 411 524 717 755 792 891 767
and suspension fixing

Shelf unit interior colour = shelf unit exterior colour.

Widths in mm grid variably available.
Please state desired width.

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 39.75 cm
Side depth 34 cm FS4034 L/R 34 0 0 43 63 93 116 60
Side depth 56 cm FS4056 L/R 56 0 0 58 83 122 153 79

Carcase height 53.0 cm

Diagram shows L Side depth 34 cm FS5334 L/R 34 0 0 44 65 93 117 62
Side depth 56 cm FS5356 L/R 56 0 0 65 93 129 161 84

Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all wall units FSOL L/R 46 46 - - - - -

Leading edge as carcase exterior side.

Diagram shows L

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“ on page 10.07.

60.06 1/2022
 Price group
End panels
Width 5 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit end panel Carcase height 39.75 cm
Front finish Depth 36.2 cm
wall-bound solution (one-sided) COW54036 L/R 5 234 243 261 291 310 332 354 376
Width 5 cm
Carcase height 53.0 cm
Please state the relevant L/R. Depth 36.2 cm
Diagram shows L
The end panel width is always 5 cm. COW55336 L/R 5 237 246 264 295 314 337 358 382

Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit blender Carcase height 39.75 cm
Front finish COP2040 L/R 20 52 53 56 60 64 67 67 72

Front finish blenders are manufactured with a maximum Carcase height 53.0 cm
20 cm width. COP2053 L/R 20 52 53 57 65 67 69 70 77

Diagram shows L

Wall unit blender Carcase height 39.75 cm

with sides, shelf below and above COPB2040 20 104 105 109 114 118 121 121 126
Bottom in carcase colour
Front finish Carcase height 53.0 cm
COPB2053 20 104 105 110 119 121 123 124 130
Front finish blenders are manufactured with a maximum
20 cm width.

Wall unit corner blender 90° Carcase height 39.75 cm

Front finish COPE40 10 89 93 97 107 112 117 123 133

freely selectable leg measurement Carcase height 53.0 cm

from 4 x 4 cm to 10 x 10 cm width COPE53 10 89 93 97 111 118 123 129 142

Flush with front.

4 Please state rear length (inside measurement)
from l to r on order.
4

Wall unit corner blender 90° Carcase height 39.75 cm

with sides, shelf below and above COPEB40 10 257 263 267 276 281 285 292 302
Bottom in carcase colour
Front finish Carcase height 53.0 cm
freely selectable leg measurement COPEB53 10 257 263 267 280 286 292 298 310
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Wall unit corner blender Carcase height 39.75 cm

Front finish COPEW40 10 94 96 100 111 117 122 126 136

Freely selectable angle up to max. 270° Carcase height 53.0 cm

(Programme BOSSA-C permitted up to 180°) COPEW53 10 98 100 107 117 122 127 131 145
and freely selectable leg measurement from
Carcase height 39.75 / 53.0 cm:
2 x 2 cm up to 10 x 10 cm width
Not available in IOS-C, IOS-M-C
2
Flush with front.
Please state rear length (inside measurement)
2

from l to r on order.

1/2022 60.07
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit corner blender Carcase height 39.75 cm
with sides, shelf below and above COPEWB40 10 272 274 278 288 294 299 303 314
Bottom in carcase colour
Front finish Carcase height 53.0 cm
Freely selectable angle up to max. 270° COPEWB53 10 276 278 284 294 299 304 308 322
(Programme BOSSA-C permitted up to 180°)
Carcase height 39.75 / 53.0 cm:
and freely selectable leg measurement from
Not available in IOS-C, IOS-M-C
2 x 2 cm up to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall unit blender Carcase height 39.75 cm
flush with carcase OSB2040 20 28 30 34 44 47 50 61 43

Carcase height 53.0 cm

OSB2053 20 29 32 37 47 51 55 65 47

Price group
Original fronts

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Front part height 39.5 cm CFT030395 30 64 69 89 111 131 154 178 207
CFT040395 40 67 72 96 119 142 165 196 222
Please state intended purpose. CFT045395 45 67 77 97 120 143 168 205 231
CFT050395 50 70 78 102 125 153 177 212 235
CFT060395 60 71 82 111 131 163 191 235 261
CFT080395 80 135 152 191 233 277 318 379 379
CFT090395 90 145 160 205 248 299 349 416 472
CFT100395 100 149 163 209 251 302 353 419 476
CFT120395 120 157 170 217 260 310 360 427 484

Front part height 52.75 cm CFT030053 30 72 80 104 130 157 180 220 247
CFT040053 40 77 82 112 136 168 195 231 266
Please state intended purpose. CFT045053 45 77 89 114 143 172 199 237 275
CFT050053 50 78 94 119 149 181 216 244 280
CFT060053 60 81 98 123 155 189 225 275 305
CFT080053 80 139 159 192 260 318 377 464 508
CFT090053 90 154 162 195 279 336 393 481 529
CFT100053 100 168 180 224 312 384 454 556 622
CFT120053 120 191 213 260 360 446 529 652 739

60.08 1/2022
CONTINO
Wall units, carcase height 66.25 cm

Wall units - Carcase height 66.25 cm, carcase depth 34 cm 61. 01

Corner wall units - Carcase height 66.25 cm, carcase depth 34 cm 61. 01-02

Wall units
CONTINO

66.25 cm
Wall units for extractor - Carcase height 66.25 cm, carcase depth 34 cm 61. 02-03

Wall units with extractor ELICA - Carcase height 66.25 cm, carcase depth 34 cm 61. 04
61.
Swing flap door wall units - Carcase height 66.25 cm, carcase depth 34 cm 61. 04

Wall units with fold-up doors - Carcase height 66.25 cm, carcase depth 34 cm 61. 05

Wall units with sliding doors - Carcase height 66.25 cm, carcase depth 34 cm 61. 05

Interior+ wall units - Carcase height 66.25 cm, carcase depth 34 cm 61. 06

Glass door wall units - Carcase height 66.25 cm, carcase depth 34 cm 61. 07

Wall shelf units - Carcase height 66.25 cm, shelf unit depth 36.2 cm 61. 07

Wall shelf units, thick 2.8 cm - Carcase height 66.25 cm, shelf unit depth 36.2 cm 61. 07

Visible carcase sides - Wall units, carcase height 66.25 cm 61. 08

End panels - Width 5 cm 61. 08

Blenders - Wall units, carcase height 66.25 cm 61. 08-09

Blenders - Wall units, carcase height 66.25 cm 61. 09

Original fronts - Wall units, carcase height 66.25 cm 61. 10

1/2022 61.
 CONTINO
Wall units, carcase height 66.25 cm
T: Cupboard depth cm
H: Cupboard height cm

Wall units Extractor units Swing flap door Sliding doors Glass cupboards

61.01 T: 36 cm 61.02 T: 36 cm 61.04 T: 36 cm 61.05 T: 36 cm 61.07 T: 36 cm

CO 20 66 COHS 60 66 COSK 45 66 COSS 120 66 T2 CO 45 66 PG
CO 30 66 COSK 50 66 COSS 160 66 T2 CO 50 66 PG
CO 40 66 COSK 60 66 COSS 180 66 T2 CO 60 66 PG
Wall units
CONTINO

66.25 cm

CO 45 66 COSK 80 66
CO 50 66 COSK 90 66
CO 60 66 COSK 100 66
COSK 120 66
61.01 T: 36 cm 61.02 T: 36 cm 61.04 T: 36 cm 61.07 T: 36 cm
CO 80 66 COHS 90 66 COSKS 150 66 CO 90 66 PG
61. CO 90 66 CO 100 66 PG
CO 100 66

Interior+

61.01 T: 36 cm 61.02 T: 36 cm 61.04 T: 36 cm 61.06 T: 36 cm

COM 50 66 COHS 90 66 M COSKS 180 66 CO 50 66 I
COM 60 66 CO 60 66 I

Shelves

61.07 T: 36 cm
61.03 T: 36 cm 61.04 T: 36 cm 61.06 T: 36 cm
COHD 60 66 COSKS 200 66 CO 100 66 I OR 30 66
OR 40 66
OR 45 66
OR 50 66
OR 60 66
Corner units OR 90 66

61.07 T: 36 cm
61.01 T: 36 cm 61.03 T: 36 cm
COEE 80 66 COHD 90 66 O3R 30 66
COEE 90 66 O3R 60 66
O3R 90 66

Fold-up door

61.01 T: 36 cm 61.03 T: 36 cm 61.05 T: 36 cm

COE 60 66 COHDSK 60 66 COFK 60 66
COFK 80 66
COFK 90 66
COFK 100 66
COFK 120 66

61.01 T: 36 cm 61.03 T: 36 cm
COE 65 66 COHD 60 66 D

61.02 T: 36 cm 61.03 T: 36 cm
COE 60 66 T2 COHD 90 66 D
COHD 120 66 D

61.02 T: 36 cm 61.03 T: 36 cm
COE 65 66 T2 COHDSK 60 66 D
COHDSK 90 66 D
COHDSK 120 66 D

61.02 T: 36 cm 61.04 T: 36 cm
COED 60 66 COHD 60 66 DE

61.04 T: 36 cm
COHD 90 66 DE
COHD 120 66 DE

61. 1/2022
 Price group
Wall units
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit CO2066 L/R 20 179 189 207 243 271 294 333 362
1 door CO3066 L/R 30 179 189 207 243 271 294 333 362
2 adjustable shelves CO4066 L/R 40 181 191 220 253 283 308 348 379
1 grip profile in the lower shelf CO4566 L/R 45 183 195 223 260 290 317 365 399
CO5066 L/R 50 191 203 224 273 298 326 370 403
Diagram shows L CO6066 L/R 60 195 213 227 284 320 356 391 426

Wall unit CO8066 80 272 293 325 386 448 508 585 639
2 doors CO9066 90 278 295 344 400 464 528 610 666
2 adjustable shelves CO10066 100 288 313 348 425 495 565 643 700
1 grip profile in the lower shelf

Wall unit microwave housing COM5066 50 235 246 259 288 307 329 360 393
1 top hinged door COM6066 60 241 256 268 299 330 357 387 420
1 appliance niche

Only possible with touch opening.

For microwave (built-in trim kit
will be necessary).
Please state appliance model on order!

Price group
Corner wall units
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Please note planning instructions on page 60.01!

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Corner wall unit .
Planning depth 41.7 cm Door width 40 cm
Planning dimension 81.7 cm (78 - 94 cm) COEE8066 L/R 80 316 347 385 457 512 565 621 677
Door width 50 cm
Planning dimension 91.7 cm (88 - 104 cm) COEE9066 L/R 90 347 377 423 509 552 598 670 731
1 door
Diagram shows L 2 adjustable shelves
1 inner blender with angle blender COPEEW866 8 0 0 0 0 0 0 0 0
1.7 Actual space
adjustable from 4 to 10 cm
Extra charge per 5 cm additional CMPTP5 5 6 8 8 8 11 14 14 16
Pl.depth

34 80/90
width (up to max. 20 cm)
7.7
Door width
Only possible with touch opening.
Attention: imperative to state the actual planning
measurement. The angle blender COPEEW 8 .. is
adjusted at factory.

Corner wall unit COE6066 L/R 60 351 385 414 495 547 598 651 709
rear length 60 x 60 cm
Not available in IOS-C, IOS-M-C, VALAIS-C
1 double hinged door
2 adjustable shelves
1 grip profile in the lower shelf

Do not plan protruding items such as extractors etc.

in the front elevation.
Diagram shows L

Corner wall unit COE6566 L/R 65 382 417 453 537 591 645 698 762
rear length 65 x 65 cm
Not available in IOS-C, IOS-M-C, VALAIS-C
1 double hinged door
2 adjustable shelves
1 grip profile in the lower shelf

Do not plan protruding items such as extractors etc.

in the front elevation.
Diagram shows L

1/2022 61.01
 Price group
Corner wall units
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Please note planning instructions on page 60.01!

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Corner wall unit COE6066T2 L/R 60 351 385 414 495 547 598 651 709
rear length 60 x 60 cm
Not available in IOS-C, IOS-M-C, VALAIS-C
2 doors with wide angle hinges
2 adjustable shelves
1 grip profile in the lower shelf

Style left/right determines the hinged side of the

less wide door, which must be opened first.
Do not plan protruding items such as extractors etc.
in the front elevation.

Corner wall unit COE6566T2 L/R 65 382 417 453 537 591 645 698 762
rear length 65 x 65 cm
Not available in IOS-C, IOS-M-C, VALAIS-C
2 doors with wide angle hinges
2 adjustable shelves
1 grip profile in the lower shelf

Style left/right determines the hinged side of the

less wide door, which must be opened first.
Do not plan protruding items such as extractors etc.
in the front elevation.

Diagonal corner wall unit 135° COED6066 L/R 60 413 428 437 515 555 596 645 703
1 door
Not available in IOS-C, IOS-M-C
2 corner blenders
2 adjustable shelves

Only possible with touch opening.

Diagram shows L

Price group
Wall units for extractor
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit for extractor COHS6066 L/R 60 343 352 370 433 470 511 557 607
1 door
up to 3 shelves, 8.5 cm deep
1 construction shelf

Only possible with touch opening.

Diagram shows L

Wall unit for extractor COHS9066 90 468 492 522 615 674 732 817 890
2 doors
up to 3 shelves, 8.5 cm deep
1 construction shelf

Only possible with touch opening.

Wall unit for extractor COHS9066M 90 590 613 644 740 803 859 947 1013
2 doors
up to 3 shelves, 8.5 cm deep
1 construction shelf
2 centre panels
2 each adjustable shelves right and left

Only possible with touch opening.

Necessary to state appliance.

Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)
Cupboard division dependent on appliance.

61.02 1/2022
 Price group
Wall units for extractor
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit for extractor COHD6066 L/R 60 343 352 370 433 470 511 557 607
1 door
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender
Diagram shows L 1 shelf below according to appliance
requirement

Only possible with touch opening.

Wall unit for extractor COHD9066 90 468 492 522 615 674 732 817 890
2 doors
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender in two parts
1 shelf below according to appliance
requirement

Only possible with touch opening.

Smaller appliances can also be positioned eccentrically.

Swing flap door wall unit COHDSK6066 60 555 572 584 635 704 707 754 797
for extractor
1 swing flap door
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender
1 shelf below according to appliance
requirement

Allow at least 18 cm space above

the cupboard.
Exclusively possible with electric drive AN OSKE,
see page 10.12!
Drive has to be ordered separately.

The hose covering above the intermediate shelf can be individually positioned and adjusted on site.
Only intended for installation of ventilation components.
Necessary to state appliance.
Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)

Wall unit for extractor COHD6066D L/R 60 346 371 393 479 531 586 639 752
1 door
1 fixed shelf

Only possible with touch opening.

Diagram shows L Necessary to state appliance.

Wall unit for extractor COHD9066D 90 430 454 519 597 685 768 878 1017
2 doors COHD12066D 120 550 577 688 763 889 1013 1184 1369
1 fixed shelf

Only possible with touch opening.

Necessary to state appliance.

Swing flap door wall unit COHDSK6066D 60 641 664 688 770 827 883 933 1071
for extractor COHDSK9066D 90 738 773 807 903 967 1032 1088 1246
1 swing flap door COHDSK12066D 120 905 951 999 1113 1192 1273 1338 1533
1 fixed shelf

Allow at least 18 cm space above

the cupboard.
Exclusively possible with electric drive AN OSKE,
see page 10.12!
Drive has to be ordered separately.
Necessary to state appliance.

Permitted appliances:
Elica: BOXIN PLUS, GLASSOUT, FILO, INSIDE
Falmec: MOVE, VIRGOLA
Novy: FUSION PRO

1/2022 61.03
 Price group
Wall units with extractor ELICA
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit with extractor COHD6066DE L/R 60 600 615 629 682 716 750 782 852
1 door
1 fixed shelf
1 extractor 34 cm deep

Diagram shows L Only possible with touch opening.

Appliance description see page 60.03.

Wall unit with extractor COHD9066DE 90 692 706 748 796 850 903 971 1058
2 doors COHD12066DE 120 870 886 955 1002 1081 1158 1265 1379
1 fixed shelf
1 extractor 34 cm deep

Only possible with touch opening.

Appliance description see page 60.03.

Recirculating set DEUMS 58

Set for on-site conversion
consisting of:
1 air circulation filter
1 recirculation pipe with ventilation grille

Price group
Swing flap door wall units
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Swing flap door wall unit COSK4566 45 382 393 418 457 485 515 560 610
1 swing flap door COSK5066 50 389 399 419 467 496 523 567 617
2 adjustable shelves COSK6066 60 393 406 424 479 517 553 586 640
1 grip profile in the lower shelf COSK8066 80 468 491 514 579 622 667 706 769
COSK9066 90 508 530 558 628 676 725 765 834
With 120 cm width with centre panel and COSK10066 100 545 574 604 679 731 781 825 900
4 adjustable shelves. COSK12066 120 620 658 693 779 837 894 945 1031

Swing flap door wall unit COSKS15066 L/R 150 787 876 916 1034 1136 1149 1218 1329
consisting of:
Not available in ALURO-C, BOSSA-C, MINERA-C, TOCCO-C
1 swing flap door
1 carcase COSK 90 66
1 carcase COSK 60 66
2 adjustable shelves per carcase
1 grip profile in the lower shelf

The positioning of the widest carcase is

determined by the style L/R.

Swing flap door wall unit COSKS18066 180 945 993 1044 1174 1290 1303 1375 1500
consisting of:
Not available in ALURO-C, BOSSA-C, MINERA-C, TOCCO-C
1 swing flap door
2 carcases COSK 90 66
2 adjustable shelves per carcase
1 grip profile in the lower shelf

Swing flap door wall unit COSKS20066 200 1018 1072 1127 1269 1392 1407 1483 1617
consisting of:
Not available in ALURO-C, BOSSA-C, MINERA-C, TOCCO-C
1 swing flap door
2 carcases COSK 100 66
2 adjustable shelves per carcase
1 grip profile in the lower shelf

Allow at least 18 cm space above the cupboard.

Electric drive mechanism see page 10.12.

Swing flap door wall units from 150 cm width can be reduced in cupboard module free of charge.

61.04 1/2022
 Price group
Wall units with fold-up doors
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit with fold-up doors COFK6066 60 414 450 464 552 604 658 709 776
2 fold-up doors in programme style COFK8066 80 470 506 525 624 681 742 795 868
2 adjustable shelves COFK9066 90 496 536 557 659 719 783 841 917
1 grip profile in the lower shelf COFK10066 100 551 588 616 718 784 854 913 995
COFK12066 120 603 638 674 770 844 924 974 1063
With 120 cm width with centre panel and
4 adjustable shelves.

Please allow at least 21.5 cm free space above the cupboard. By using the provided opening inhibitor, the measurement is reduced to 12 cm.
Electric drive mechanism see page 10.12.

Price group
Wall units with sliding doors
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit with sliding doors COSS12066T2 120 1417 1437 1461 1527 1575 1623 1673 1823
consisting of: COSS16066T2 160 1533 1558 1588 1668 1726 1783 1842 2006
2 sliding doors on one front level COSS18066T2 180 1624 1649 1687 1778 1846 1911 1981 2160
1 carcase, left in half the planning width
Cupboard width 120, 160, 180 cm:
1 carcase, right in half the planning width
Not available in IOS-C, IOS-M-C
2 adjustable shelves per carcase
1 fitting-set for on-site installation
1 grip profile in the lower shelf

Sliding doors in closed position on one level.

Guide-fitting on top shelf, top cupboard not possible.
Installation space above at least 3 cm.
The cupboard is supplied in separate modules.
Width alterations not possible!

1/2022 61.05
 Price group
Interior+ wall units
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Interior+ base wall unit CO5066I L/R 50 191 203 224 273 298 326 370 403
1 door CO6066I L/R 60 195 213 227 284 320 356 391 426
2 adjustable shelves (depth 15 cm)
1 grip profile in the lower shelf
additional Interior+ swing-out frame
Diagram shows L essential
Interior+ swing-out frame For cupboard width 50 cm
1 swing-out frame with: IP5066 798
2 adjustable profile shelves For cupboard width 60 cm
6 railings IP6066 832

Interior+ base wall unit CO10066I 100 288 313 348 425 495 565 643 700
2 doors
2 adjustable shelves (depth 15 cm)
1 grip profile in the lower shelf
additional Interior+ swing-out frame
essential
Interior+ swing-out frame For cupboard width 100 cm
2 swing-out frames with each: IP10066 1570
2 adjustable profile shelves
6 railings

Possible accessories
precise description see page 90.34.

Interior+ shelf IP50B 50 155

IP60B 60 160

Interior+ railing IP50R 50 73

IP60R 60 74

Interior+ glass jar set IPGD3 72

IPGD4 94

Interior+ container IP1423C 67

IP1435C 67

Interior+ spice jar swing-out frame IPGR L/R 237

2 fixed profile shelves
height 37.9 cm, width 37.9 cm,
depth 9 cm
Cupboard prepared for on-site installation

Available for standard wall units from

Diagram shows L 50 cm width and from 53 cm height.
Turning position as hinged side of door.
For two-door cupboards, state hinged side
right or left.

Interior+ glass railing insert IPGRE 38

1 insert with glass railing
height 7.7 cm, width 34.8 cm

For use with Interior+ spice jar swing-out frame.

61.06 1/2022
 Price group
Glass door wall units
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Glass door wall unit Basic type
1 programme glass door CO4566PG L/R 45 313 348 351 368 378 389 391 426
2 adjustable glass shelves CO5066PG L/R 50 332 361 364 386 395 403 405 444
1 grip profile in the lower shelf CO6066PG L/R 60 356 392 393 410 424 435 439 477
Always state interior style,
possible colours see chapter 11! Extra charge interior
Diagram shows L MPK/KH/KG 0
See glass front type on page 10.13. MPFF/PF/VM 89
MPFS/ME 130
MPFG 203
MPH 195
Cupboard width 45, 50, 60 cm:
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, SOLID-C, VALAIS-C

Glass door wall unit Basic type

2 programme glass doors CO9066PG 90 589 653 657 693 712 732 736 802
2 adjustable glass shelves CO10066PG 100 616 679 681 723 738 754 764 833
1 grip profile in the lower shelf
Always state interior style, Extra charge interior
possible colours see chapter 11! MPK/KH/KG 0
MPFF/PF/VM 147
See glass front type on page 10.13. MPFS/ME 215
MPFG 337
MPH 254
Cupboard width 90, 100 cm:
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, SOLID-C, VALAIS-C

Surface style
Wall shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 66.25 cm, shelf unit depth 36.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit OR3066 10-30 199 221 265 346 - 385 441 376
2 adjustable shelves OR4066 30-40 228 250 309 410 - 457 522 443
OR4566 40-45 242 266 332 443 - 493 563 478
Widths in mm grid variably available. OR5066 45-50 257 279 354 475 - 528 605 512
Please state desired width. OR6066 50-60 285 309 399 539 - 599 687 580
OR9066 60-90 369 399 534 731 - 812 933 784

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.
If the exterior of the shelves is requested to be the same colour as the inside, please confirm type AN EINREG.

Surface style
Wall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 66.25 cm, shelf unit depth 36.2 cm Neutral

FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit, O3R3066 10-30 291 316 366 455 477 499 561 500
thick 2.8 cm O3R6066 30-60 395 422 527 685 721 756 857 744
back panel with circumferential shadow joint O3R9066 60-90 498 526 688 915 964 1013 1152 986
and suspension fixing
2 shelves

Shelf unit interior colour = shelf unit exterior colour.

Widths in mm grid variably available.
Please state desired width.

1/2022 61.07
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 66.25 cm
Side depth 34 cm FS6634 L/R 34 0 0 49 72 104 130 69
Side depth 56 cm FS6656 L/R 56 0 0 77 113 161 203 108

Leading edge as carcase exterior side.

Diagram shows L

Visible carcase side .

for additional planning
for all wall units FSOL L/R 46 46 - - - - -

Leading edge as carcase exterior side.

Diagram shows L

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“ on page 10.07.

Price group
End panels
Width 5 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit end panel Carcase height 66.25 cm
Front finish Depth 36.2 cm
wall-bound solution (one-sided) COW56636 L/R 5 238 247 266 297 316 339 360 385
Width 5 cm

Please state the relevant L/R.

Diagram shows L
The end panel width is always 5 cm.

Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit blender Carcase height 66.25 cm
Front finish COP2066 L/R 20 56 57 59 67 69 71 73 80

Front finish blenders are manufactured with a maximum

20 cm width.

Diagram shows L

Wall unit blender Carcase height 66.25 cm

with sides, shelf below and above COPB2066 20 109 110 112 121 123 125 127 133
Bottom in carcase colour
Front finish

Front finish blenders are manufactured with a maximum

20 cm width.

61.08 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit corner blender 90° Carcase height 66.25 cm
Front finish COPE66 10 95 97 111 123 130 138 142 156

freely selectable leg measurement

from 4 x 4 cm to 10 x 10 cm width

Flush with front.

4 Please state rear length (inside measurement)
from l to r on order.
4

Wall unit corner blender 90° Carcase height 66.25 cm

with sides, shelf below and above COPEB66 10 265 267 280 292 299 306 310 325
Bottom in carcase colour
Front finish
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Wall unit corner blender Carcase height 66.25 cm

Front finish COPEW66 10 107 111 124 138 149 158 160 174
Not available in IOS-C, IOS-M-C
Freely selectable angle up to max. 270°
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
2 x 2 cm up to 10 x 10 cm width
2
Flush with front.
Please state rear length (inside measurement)
2

from l to r on order.

Wall unit corner blender Carcase height 66.25 cm

with sides, shelf below and above COPEWB66 10 284 288 301 315 326 335 338 352
Bottom in carcase colour
Not available in IOS-C, IOS-M-C
Front finish
Freely selectable angle up to max. 270°
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
2 x 2 cm up to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.
Neutral

FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall unit blender Carcase height 66.25 cm
flush with carcase OSB2066 20 30 37 40 51 56 61 71 49

1/2022 61.09
 Price group
Original fronts

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Front part height 66.0 cm CFT020066 20 78 83 112 136 165 191 231 266
CFT030066 30 78 83 112 136 165 191 231 266
Please state intended purpose. CFT040066 40 79 87 118 146 176 207 242 279
CFT045066 45 79 95 119 152 179 211 249 286
CFT050066 50 80 97 124 156 188 223 265 293
CFT060066 60 87 104 128 163 201 239 287 326
CFT080066 80 149 165 201 275 333 392 482 526
CFT090066 90 171 191 235 310 377 445 545 597
CFT100066 100 192 220 270 349 423 496 608 667
CFT120066 120 238 276 335 424 513 600 734 807

61.10 1/2022
CONTINO
Wall units, carcase height 79.5 cm

Wall units - Carcase height 79.5 cm, carcase depth 34 cm 62. 01

Corner wall units - Carcase height 79.5 cm, carcase depth 34 cm 62. 01-02

Wall units for extractor - Carcase height 79.5 cm, carcase depth 34 cm 62. 02-03

Wall units with extractor ELICA - Carcase height 79.5 cm, carcase depth 34 cm 62. 04

Wall units with fold-up doors - Carcase height 79.5 cm, carcase depth 34 cm 62. 04

Wall units with sliding doors - Carcase height 79.5 cm, carcase depth 34 cm 62. 05

Interior+ wall units - Carcase height 79.5 cm, carcase depth 34 cm 62. 05-06

Wall units
CONTINO

79.5 cm
Glass door wall units - Carcase height 79.5 cm, carcase depth 34 cm 62. 06

Wall shelf units - Carcase height 79.5 cm, shelf unit depth 36.2 cm 62. 06
62.
Wall shelf units, thick 2.8 cm - Carcase height 79.5 cm, shelf unit depth 36.2 cm 62. 07

Visible carcase sides - Wall units, carcase height 79.5 cm 62. 07

End panels - Width 5 cm 62. 07

Blenders - Wall units, carcase height 79.5 cm 62. 08

Blenders - Wall units, carcase height 79.5 cm 62. 09

Original fronts - Wall units, carcase height 79.5 cm 62. 09

1/2022 62.
 CONTINO
Wall units, carcase height 79.5 cm
T: Cupboard depth cm
H: Cupboard height cm

Wall units Extractor units Fold-up doors Sliding doors Glass cupboards

62.01 T: 36 cm 62.02 T: 36 cm 62.04 T: 36 cm 62.05 T: 36 cm 62.06 T: 36 cm

CO 20 80 COHS 60 80 COFK 60 80 COSS 120 80 T2 CO 45 80 PG
CO 30 80 COFK 80 80 COSS 160 80 T2 CO 50 80 PG
CO 40 80 COFK 90 80 COSS 180 80 T2 CO 60 80 PG
CO 45 80 COFK 100 80
CO 50 80 COFK 120 80
CO 60 80

62.01 T: 36 cm 62.02 T: 36 cm 62.04 T: 36 cm 62.06 T: 36 cm

CO 80 80 COHS 90 80 COFK 60 80 PPG CO 90 80 PG
CO 90 80 COFK 80 80 PPG CO 100 80 PG
CO 100 80 COFK 90 80 PPG
COFK 100 80 PPG
COFK 120 80 PPG Interior+

62.01 T: 36 cm 62.02 T: 36 cm 62.05 T: 36 cm

Wall units
CONTINO

COM 50 80 COHS 90 80 M CO 50 80 I
79.5 cm

COM 60 80 CO 60 80 I

Shelves
62.
62.03 T: 36 cm 62.05 T: 36 cm 62.06 T: 36 cm
COHSFK 90 80 M CO 100 80 I OR 30 80
OR 40 80
OR 45 80
OR 50 80
Corner units OR 60 80
OR 90 80

62.01 T: 36 cm 62.03 T: 36 cm 62.07 T: 36 cm

COEE 80 80 COHD 60 80 O3R 30 80
COEE 90 80 O3R 60 80
O3R 90 80

62.01 T: 36 cm 62.03 T: 36 cm
COE 60 80 COHD 90 80

62.01 T: 36 cm 62.03 T: 36 cm
COE 65 80 COHD 60 80 D

62.02 T: 36 cm 62.03 T: 36 cm
COE 60 80 T2 COHD 90 80 D
COHD 120 80 D

62.02 T: 36 cm 62.04 T: 36 cm
COE 65 80 T2 COHD 60 80 DE

62.02 T: 36 cm 62.04 T: 36 cm
COED 60 80 COHD 90 80 DE
COHD 120 80 DE

62. 1/2022
 Price group
Wall units
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit CO2080 L/R 20 193 208 225 266 292 317 362 395
1 door CO3080 L/R 30 193 208 225 266 292 317 362 395
2 adjustable shelves CO4080 L/R 40 200 213 239 281 310 341 386 419
1 grip profile in the lower shelf CO4580 L/R 45 203 217 243 288 317 347 401 439
CO5080 L/R 50 213 222 245 296 329 359 413 450
CO6080 L/R 60 219 230 254 311 352 392 434 472
Diagram shows L

Wall unit CO8080 80 293 314 358 423 484 547 645 703
2 doors CO9080 90 300 321 377 436 509 578 677 738
2 adjustable shelves CO10080 100 316 346 391 472 548 624 720 783
1 grip profile in the lower shelf

Wall unit microwave housing COM5080 L/R 50 251 267 283 314 338 357 403 442
1 door COM6080 L/R 60 263 279 295 332 361 393 431 468
1 appliance niche

Only possible with touch opening.

For microwave (built-in trim kit
Diagram shows L will be necessary).
Please state appliance model on order!

Price group
Corner wall units
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Please note planning instructions on page 60.01!

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Corner wall unit .
Planning depth 41.7 cm Door width 40 cm
Planning dimension 81.7 cm (78 - 94 cm) COEE8080 L/R 80 343 371 418 492 550 608 683 744
Door width 50 cm
Planning dimension 91.7 cm (88 - 104 cm) COEE9080 L/R 90 371 402 457 541 594 645 735 801
1 door
2 adjustable shelves
Diagram shows L 1 inner blender with angle blender COPEEW880 8 0 0 0 0 0 0 0 0
adjustable from 4 to 10 cm
1.7 Actual space
Extra charge per 5 cm additional CMPTP5 5 6 8 8 8 11 14 14 16
Pl.depth

34 80/90 width (up to max. 20 cm)

7.7
Door width Only possible with touch opening.
Attention: imperative to state the actual planning
measurement. The angle blender COPEEW 8 .. is
adjusted at factory.

Corner wall unit COE6080 L/R 60 383 421 452 538 595 650 704 767
rear length 60 x 60 cm
Not available in IOS-C, IOS-M-C, VALAIS-C
1 double hinged door
2 adjustable shelves
1 grip profile in the lower shelf

Do not plan protruding items such as extractors etc.

in the front elevation.
Diagram shows L

Corner wall unit COE6580 L/R 65 419 460 500 591 650 708 774 844
rear length 65 x 65 cm
Not available in IOS-C, IOS-M-C, VALAIS-C
1 double hinged door
2 adjustable shelves
1 grip profile in the lower shelf

Do not plan protruding items such as extractors etc.

in the front elevation.
Diagram shows L

1/2022 62.01
 Price group
Corner wall units
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Please note planning instructions on page 60.01!

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Corner wall unit COE6080T2 L/R 60 383 421 452 538 595 650 704 767
rear length 60 x 60 cm
Not available in IOS-C, IOS-M-C, VALAIS-C
2 doors with wide angle hinges
2 adjustable shelves
1 grip profile in the lower shelf

Style left/right determines the hinged side of the

less wide door, which must be opened first.
Do not plan protruding items such as extractors etc.
in the front elevation.

Corner wall unit COE6580T2 L/R 65 419 460 500 591 650 708 774 844
rear length 65 x 65 cm
Not available in IOS-C, IOS-M-C, VALAIS-C
2 doors with wide angle hinges
2 adjustable shelves
1 grip profile in the lower shelf

Style left/right determines the hinged side of the

less wide door, which must be opened first.
Do not plan protruding items such as extractors etc.
in the front elevation.

Diagonal corner wall unit 135° COED6080 L/R 60 449 468 483 569 614 659 720 783
1 door
Not available in IOS-C, IOS-M-C
2 corner blenders
2 adjustable shelves

Only possible with touch opening.

Diagram shows L

Price group
Wall units for extractor
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit for extractor COHS6080 L/R 60 358 374 399 463 504 542 601 656
1 door
up to 4 shelves, 8.5 cm deep
1 construction shelf

Only possible with touch opening.

Diagram shows L

Wall unit for extractor COHS9080 90 494 517 557 652 718 780 882 962
2 doors
up to 4 shelves, 8.5 cm deep
1 construction shelf

Only possible with touch opening.

Wall unit for extractor COHS9080M 90 609 632 672 767 859 916 1018 1213
2 doors
up to 4 shelves, 8.5 cm deep
1 construction shelf
2 centre panels
2 each adjustable shelves right and left

Only possible with touch opening.

Necessary to state appliance.

Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)
Cupboard division dependent on appliance.

62.02 1/2022
 Price group
Wall units for extractor
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit with fold-up doors COHSFK9080M 90 680 719 747 855 912 1000 1073 1235
for extractor
2 fold-up doors in programme style
up to 4 shelves, 8.5 cm deep
1 construction shelf
2 centre panels
2 each adjustable shelves right and left

Exclusively possible with electric drive AN OKE,

see page 10.12!
Drive has to be ordered separately.

Necessary to state appliance.

Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)
Cupboard division dependent on appliance.

Please allow at least 21.5 cm free space above the cupboard. By using the provided opening inhibitor, the measurement is reduced to 12 cm.

Wall unit for extractor COHD6080 L/R 60 358 374 399 463 504 542 601 656
1 door
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender
1 shelf below according to appliance requirement
Diagram shows L
Only possible with touch opening.

Wall unit for extractor COHD9080 90 494 517 557 652 718 780 882 962
2 doors
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender in two parts
1 shelf below according to appliance requirement

Only possible with touch opening.

Smaller appliances can also be positioned eccentrically.

The hose covering above the intermediate shelf can be individually positioned and adjusted on site.
Only intended for installation of ventilation components.
Necessary to state appliance.
Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)

Wall unit for extractor COHD6080D L/R 60 382 397 435 519 580 639 703 822
1 door
1 fixed shelf

Only possible with touch opening.

Necessary to state appliance.
Diagram shows L

Wall unit for extractor COHD9080D 90 461 488 565 644 739 834 969 1117
2 doors COHD12080D 120 583 622 739 820 962 1098 1305 1498
1 fixed shelf

Only possible with touch opening.

Necessary to state appliance.

Permitted appliances:
Elica: BOXIN PLUS, GLASSOUT, FILO, INSIDE
Falmec: MOVE, VIRGOLA
Novy: FUSION PRO

1/2022 62.03
 Price group
Wall units with extractor ELICA
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit with extractor COHD6080DE L/R 60 621 631 656 707 746 782 822 896
1 door
1 fixed shelf
1 extractor 34 cm deep

Only possible with touch opening.

Diagram shows L
Appliance description see page 60.03.

Wall unit with extractor COHD9080DE 90 710 728 776 825 885 944 1028 1120
2 doors COHD12080DE 120 890 914 987 1038 1126 1211 1340 1461
1 fixed shelf
1 extractor 34 cm deep

Only possible with touch opening.

Appliance description see page 60.03.

Recirculating set DEUMS 58

Set for on-site conversion
consisting of:
1 air circulation filter
1 recirculation pipe with ventilation grille

Price group
Wall units with fold-up doors
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit with fold-up doors COFK6080 60 437 466 491 579 636 694 753 821
2 fold-up doors in programme style COFK8080 80 499 530 558 659 726 792 856 933
2 adjustable shelves COFK9080 90 528 565 595 699 769 840 910 992
1 grip profile in the lower shelf COFK10080 100 586 621 657 762 841 918 991 1078
COFK12080 120 643 679 721 823 913 1002 1069 1166
With 120 cm width with centre panel and
4 adjustable shelves.

Wall unit with fold-up doors Basic type

1 fold-up door above in programme style COFK6080PPG 60 521 568 591 704 708 723 783 854
1 framed fold-up glass door below
in programme style Extra charge interior
2 adjustable glass shelves MPK/KH/KG 0
1 grip profile in the lower shelf MPFF/PF/VM 89
Always state interior style, MPFS/ME 130
possible colours see chapter 11! MPFG 203
MPH 195
See glass front type on page 10.13.
With 120 cm width with centre panel and Basic type
4 adjustable glass shelves. COFK8080PPG 80 595 645 674 802 809 824 892 972
COFK9080PPG 90 630 687 714 852 858 876 948 1033
COFK10080PPG 100 697 757 790 925 937 957 1029 1121
COFK12080PPG 120 764 826 866 1001 1017 1043 1112 1212

Extra charge interior

MPK/KH/KG 0
MPFF/PF/VM 147
MPFS/ME 215
MPFG 337
MPH 254
Cupboard width 60, 80, 90, 100, 120 cm:
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, SOLID-C, VALAIS-C

Please allow at least 21.5 cm free space above the cupboard. By using the provided opening inhibitor, the measurement is reduced to 12 cm.
Electric drive mechanism see page 10.12.

62.04 1/2022
 Price group
Wall units with sliding doors
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit with sliding doors COSS12080T2 120 1446 1468 1503 1577 1630 1682 1748 1906
consisting of: COSS16080T2 160 1563 1588 1630 1714 1778 1842 1917 2090
2 sliding doors on one front level COSS18080T2 180 1651 1681 1731 1826 1899 1970 2058 2243
1 carcase, left in half the planning width
Cupboard width 120, 160, 180 cm:
1 carcase, right in half the planning width
Not available in IOS-C, IOS-M-C
2 adjustable shelves per carcase
1 fitting-set for on-site installation
1 grip profile in the lower shelf

Sliding doors in closed position on one level.

Guide-fitting on top shelf, top cupboard not possible.
Installation space above at least 3 cm.
The cupboard is supplied in separate modules.
Width alterations not possible!

Price group
Interior+ wall units
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Interior+ base wall unit CO5080I L/R 50 213 222 245 296 329 359 413 450
1 door CO6080I L/R 60 219 230 254 311 352 392 434 472
2 adjustable shelves (depth 15 cm)
1 grip profile in the lower shelf
additional Interior+ swing-out frame
Diagram shows L
essential

Interior+ swing-out frame For cupboard width 50 cm

1 swing-out frame with: IP5080 809
2 adjustable profile shelves For cupboard width 60 cm
6 railings IP6080 843

Interior+ base wall unit CO10080I 100 316 346 391 472 548 624 720 783
2 doors
2 adjustable shelves (depth 15 cm)
1 grip profile in the lower shelf
additional Interior+ swing-out frame
essential

Interior+ swing-out frame For cupboard width 100 cm

2 swing-out frames with each: IP10080 1593
2 adjustable profile shelves
6 railings

Possible accessories
precise description see page 90.34.

Interior+ shelf IP50B 50 155

IP60B 60 160

Interior+ railing IP50R 50 73

IP60R 60 74

Interior+ glass jar set IPGD3 72

IPGD4 94

Interior+ container IP1423C 67

IP1435C 67

Interior+ spice jar swing-out frame IPGR L/R 237

2 fixed profile shelves
height 37.9 cm, width 37.9 cm,
depth 9 cm
Cupboard prepared for on-site installation

Available for standard wall units from

Diagram shows L 50 cm width and from 53 cm height.
Turning position as hinged side of door.
For two-door cupboards, state hinged side
right or left.

1/2022 62.05
 Price group
Interior+ wall units
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Interior+ glass railing insert IPGRE 38
1 insert with glass railing
height 7.7 cm, width 34.8 cm

For use with Interior+ spice jar swing-out frame.

Price group
Glass door wall units
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Glass door wall unit Basic type
1 programme glass door CO4580PG L/R 45 347 379 382 414 425 436 440 479
2 adjustable glass shelves CO5080PG L/R 50 361 394 397 435 445 453 456 498
1 grip profile in the lower shelf CO6080PG L/R 60 391 425 429 464 475 486 490 533
Always state interior style,
possible colours see chapter 11! Extra charge interior
Diagram shows L MPK/KH/KG 0
See glass front type on page 10.13. MPFF/PF/VM 89
MPFS/ME 130
MPFG 203
MPH 195
Cupboard width 45, 50, 60 cm:
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, SOLID-C, VALAIS-C

Glass door wall unit Basic type

2 programme glass doors CO9080PG 90 635 707 709 793 811 828 835 911
2 adjustable glass shelves CO10080PG 100 663 734 737 822 838 853 860 939
1 grip profile in the lower shelf
Always state interior style, Extra charge interior
possible colours see chapter 11! MPK/KH/KG 0
MPFF/PF/VM 147
See glass front type on page 10.13. MPFS/ME 215
MPFG 337
MPH 254
Cupboard width 90, 100 cm:
Not available in ALURO-C, BOSSA-C, IOS-C, IOS-M-C, SOLID-C, VALAIS-C

Surface style
Wall shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 79.5 cm, shelf unit depth 36.2 cm

Neutral

FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit OR3080 10-30 216 240 312 395 - 439 502 430
2 adjustable shelves OR4080 30-40 253 277 362 465 - 517 592 504
OR4580 40-45 272 295 387 500 - 556 636 541
Widths in mm grid variably available. OR5080 45-50 291 313 412 535 - 594 682 579
Please state desired width. OR6080 50-60 328 350 462 605 - 672 772 654
OR9080 60-90 439 461 612 815 - 906 1042 880

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.
If the exterior of the shelves is requested to be the same colour as the inside, please confirm type AN EINREG.

62.06 1/2022
 Surface style
Wall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 79.5 cm, shelf unit depth 36.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit, O3R3080 10-30 307 333 413 503 528 552 621 552
thick 2.8 cm O3R6080 30-60 438 463 591 751 789 827 941 819
back panel with circumferential shadow joint O3R9080 60-90 569 592 768 998 1050 1102 1261 1086
and suspension fixing
2 shelves

Shelf unit interior colour = shelf unit exterior colour.

Widths in mm grid variably available.
Please state desired width.

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 79.5 cm
Side depth 34 cm FS8034 L/R 34 0 0 62 87 121 153 79
Side depth 56 cm FS8056 L/R 56 0 0 102 147 207 258 135

Leading edge as carcase exterior side.

Diagram shows L

Visible carcase side .

for additional planning
for all wall units FSOL L/R 46 46 - - - - -

Leading edge as carcase exterior side.

Diagram shows L

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“ on page 10.07.

Price group
End panels
Width 5 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit end panel Carcase height 79.5 cm
Front finish Depth 36.2 cm
wall-bound solution (one-sided) COW58036 L/R 5 241 250 269 301 321 344 364 390
Width 5 cm

Please state the relevant L/R.

Diagram shows L
The end panel width is always 5 cm.

1/2022 62.07
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit blender Carcase height 79.5 cm
Front finish COP2080 L/R 20 60 63 67 73 80 87 89 96

Front finish blenders are manufactured with a maximum

20 cm width.

Diagram shows L

Wall unit blender Carcase height 79.5 cm

with sides, shelf below and above COPB2080 20 114 117 121 127 133 139 142 150
Bottom in carcase colour
Front finish

Front finish blenders are manufactured with a maximum

20 cm width.

Wall unit corner blender 90° Carcase height 79.5 cm

Front finish COPE80 10 101 103 121 131 143 155 164 178

freely selectable leg measurement

from 4 x 4 cm to 10 x 10 cm width

Flush with front.

4 Please state rear length (inside measurement)
from l to r on order.
4

Wall unit corner blender 90° Carcase height 79.5 cm

with sides, shelf below and above COPEB80 10 271 273 290 300 311 324 333 347
Bottom in carcase colour
Front finish
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Wall unit corner blender Carcase height 79.5 cm

Front finish COPEW80 10 116 119 133 154 161 169 175 190
Not available in IOS-C, IOS-M-C
Freely selectable angle up to max. 270°
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
2 x 2 cm up to 10 x 10 cm width
2
Flush with front.
Please state rear length (inside measurement)
2

from l to r on order.

Wall unit corner blender Carcase height 79.5 cm

with sides, shelf below and above COPEWB80 10 293 296 311 331 339 346 353 368
Bottom in carcase colour
Not available in IOS-C, IOS-M-C
Front finish
Freely selectable angle up to max. 270°
(Programme BOSSA-C permitted up to 180°)
and freely selectable leg measurement from
2 x 2 cm up to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

62.08 1/2022
 Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall unit blender Carcase height 79.5 cm
flush with carcase OSB2080 20 36 40 44 58 64 70 81 53

Price group
Original fronts

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Front part height 79.25 cm CFT020080 20 94 100 128 160 188 218 261 296
CFT030080 30 94 100 128 160 188 218 261 296
Please state intended purpose. CFT040080 40 97 105 135 171 203 233 280 314
CFT045080 45 97 112 136 174 208 239 287 326
CFT050080 50 98 116 146 179 218 251 298 336
CFT060080 60 104 123 158 190 233 276 332 370

1/2022 62.09
1/2022
CONTINO
Wall units, carcase height 92.75 / 119.25 cm

Wall units - Carcase height 92.75 cm, carcase depth 34 cm 63. 01

Corner wall units - Carcase height 92.75 cm, carcase depth 34 cm 63. 01-02

Wall units for extractor - Carcase height 92.75 cm, carcase depth 34 cm 63. 02-03

Wall units with extractor ELICA - Carcase height 92.75 cm, carcase depth 34 cm 63. 04

Wall units with sliding doors - Carcase height 92.75 cm, carcase depth 34 cm 63. 04

Interior+ wall units - Carcase height 92.75 cm, carcase depth 34 cm 63. 04-05

Wall shelf units - Carcase height 92.75 cm, shelf unit depth 36.2 cm 63. 05

Wall shelf units, thick 2.8 cm - Carcase height 92.75 cm, shelf unit depth 36.2 cm 63. 06

Wall units - Carcase height 119.25 cm, carcase depth 34 cm 63. 06

Wall units for extractor - Carcase height 119.25 cm, carcase depth 34 cm 63. 07

92.75 / 119.25 cm
Wall units with extractor ELICA - Carcase height 119.25 cm, carcase depth 34 cm 63. 07

Wall units
Wall shelf units - Carcase height 119.25 cm, shelf unit depth 36.2 cm 63. 08

CONTINO
Wall shelf units, thick 2.8 cm - Carcase height 119.25 cm, shelf unit depth 36.2 cm 63. 08

Visible carcase sides - Wall units, carcase height 92.75 / 119.25 cm 63. 08
63.
End panels - Width 5 cm 63. 09

Blenders - Wall units, carcase height 92.75 / 119.25 cm 63. 09-10

Blenders - Wall units, carcase height 92.75 / 119.25 cm 63. 10

Original fronts - Wall units, carcase height 92.75 / 119.25 cm 63. 10

1/2022 63.
 CONTINO
Wall units, carcase height 92.75 / 119.25 cm
T: Cupboard depth cm
H: Cupboard height cm

Carcase height 92,7 cm Extractor units Sliding doors Carcase height 119,2 cm
63.01 T: 36 cm 63.02 T: 36 cm 63.04 T: 36 cm 63.06 T: 36 cm
CO 20 93 COHS 60 93 COSS 120 93 T2 CO 30 119
CO 30 93 COSS 160 93 T2 CO 40 119
CO 40 93 COSS 180 93 T2 CO 45 119
CO 45 93 CO 50 119
CO 50 93 CO 60 119
CO 60 93

63.01 T: 36 cm 63.02 T: 36 cm 63.06 T: 36 cm

CO 80 93 COHS 90 93 COM 50 119
CO 90 93 COM 60 119
CO 100 93

Interior+

63.01 T: 36 cm 63.02 T: 36 cm 63.04 T: 36 cm 63.07 T: 36 cm

COM 50 93 COHS 90 93 M CO 50 93 I COHS 60 119
COM 60 93 CO 60 93 I

63.03 T: 36 cm 63.05 T: 36 cm
COHD 60 93 CO 100 93 I
92.75 / 119.25 cm

Corner units Extractor units

Wall units
CONTINO

63.01 T: 36 cm 63.03 T: 36 cm 63.07 T: 36 cm

COEE 80 93 COHD 90 93 COHD 60 119
COEE 90 93

63.
Shelves

63.01 T: 36 cm 63.03 T: 36 cm 63.05 T: 36 cm 63.07 T: 36 cm

COE 60 93 COHD 60 93 D OR 30 93 COHD 60 119 D
OR 40 93
OR 45 93
OR 50 93
OR 60 93
OR 90 93

63.01 T: 36 cm 63.03 T: 36 cm 63.06 T: 36 cm 63.07 T: 36 cm

COE 65 93 COHD 90 93 D O3R 30 93 COHD 60 119 DE
COHD 120 93 D O3R 60 93
O3R 90 93

63.02 T: 36 cm 63.04 T: 36 cm
COE 60 93 T2 COHD 60 93 DE

Shelves

63.02 T: 36 cm 63.04 T: 36 cm 63.08 T: 36 cm

COE 65 93 T2 COHD 90 93 DE OR 30 119
COHD 120 93 DE OR 40 119
OR 45 119
OR 50 119
OR 60 119

63.02 T: 36 cm 63.08 T: 36 cm
COED 60 93 O3R 30 119
O3R 60 119
O3R 90 119

63. 1/2022
 Price group
Wall units
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit CO2093 L/R 20 230 245 272 312 343 370 418 456
1 door CO3093 L/R 30 230 245 272 312 343 370 418 456
3 adjustable shelves CO4093 L/R 40 243 255 281 323 359 397 440 479
1 grip profile in the lower shelf CO4593 L/R 45 245 260 285 336 379 423 462 506
CO5093 L/R 50 247 267 290 341 390 437 466 510
CO6093 L/R 60 266 282 302 367 414 459 513 559
Diagram shows L

Wall unit CO8093 80 345 362 417 501 573 643 714 779
2 doors CO9093 90 351 377 436 522 597 671 756 824
3 adjustable shelves CO10093 100 365 400 453 547 628 706 783 854
1 grip profile in the lower shelf

Wall unit microwave housing COM5093 L/R 50 273 284 305 343 364 387 448 486
1 door COM6093 L/R 60 283 298 324 362 396 427 474 518
1 adjustable shelf
1 appliance niche

Only possible with touch opening.

For microwave (built-in trim kit
Diagram shows L will be necessary).
Please state appliance model on order!

Price group
Corner wall units
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Please note planning instructions on page 60.01!

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Corner wall unit .
Planning depth 41.7 cm Door width 40 cm
Planning dimension 81.7 cm (78 - 94 cm) COEE8093 L/R 80 368 397 452 526 588 651 746 812
Door width 50 cm
Planning dimension 91.7 cm (88 - 104 cm) COEE9093 L/R 90 397 427 492 574 633 693 799 871
1 door
3 adjustable shelves
Diagram shows L 1 inner blender with angle blender COPEEW893 8 0 0 0 0 0 0 0 0
adjustable from 4 to 10 cm
1.7 Actual space
Extra charge per 5 cm additional CMPTP5 5 6 8 8 8 11 14 14 16
width (up to max. 20 cm)
Pl.depth

34 80/90

7.7
Door width Only possible with touch opening.
Attention: imperative to state the actual planning
measurement. The angle blender COPEEW 8 .. is
adjusted at factory.

Corner wall unit COE6093 L/R 60 414 458 490 580 636 701 757 825
rear length 60 x 60 cm
Not available in IOS-C, IOS-M-C, VALAIS-C
1 double hinged door
3 adjustable shelves
1 grip profile in the lower shelf

Do not plan protruding items such as extractors etc.

in the front elevation.
Diagram shows L

Corner wall unit COE6593 L/R 65 457 504 546 645 703 771 850 925
rear length 65 x 65 cm
Not available in IOS-C, IOS-M-C, VALAIS-C
1 double hinged door
3 adjustable shelves
1 grip profile in the lower shelf

Do not plan protruding items such as extractors etc.

in the front elevation.
Diagram shows L

1/2022 63.01
 Price group
Corner wall units
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Please note planning instructions on page 60.01!

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Corner wall unit COE6093T2 L/R 60 414 458 490 580 636 701 757 825
rear length 60 x 60 cm
Not available in IOS-C, IOS-M-C, VALAIS-C
2 doors with wide angle hinges
3 adjustable shelves
1 grip profile in the lower shelf

Style left/right determines the hinged side of the

less wide door, which must be opened first.
Do not plan protruding items such as extractors etc.
in the front elevation.

Corner wall unit COE6593T2 L/R 65 457 504 546 645 703 771 850 925
rear length 65 x 65 cm
Not available in IOS-C, IOS-M-C, VALAIS-C
2 doors with wide angle hinges
3 adjustable shelves
1 grip profile in the lower shelf

Style left/right determines the hinged side of the

less wide door, which must be opened first.
Do not plan protruding items such as extractors etc.
in the front elevation.

Diagonal corner wall unit 135° COED6093 L/R 60 483 511 529 621 673 723 793 863
1 door
Not available in IOS-C, IOS-M-C
2 corner blenders
3 adjustable shelves

Only possible with touch opening.

Diagram shows L

Price group
Wall units for extractor
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit for extractor COHS6093 L/R 60 415 434 453 527 578 627 675 736
1 door
up to 5 shelves, 8.5 cm deep
1 construction shelf

Only possible with touch opening.

Diagram shows L

Wall unit for extractor COHS9093 90 559 589 632 738 814 889 980 1069
2 doors
up to 5 shelves, 8.5 cm deep
1 construction shelf

Only possible with touch opening.

Wall unit for extractor COHS9093M 90 644 668 711 812 909 967 1077 1153
2 doors
up to 5 shelves, 8.5 cm deep
1 construction shelf
2 centre panels
3 each adjustable shelves right and left

Only possible with touch opening.

Necessary to state appliance.

Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)
Cupboard division dependent on appliance.

63.02 1/2022
 Price group
Wall units for extractor
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit for extractor COHD6093 L/R 60 415 434 453 527 578 627 675 736
1 door
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender
1 shelf below according to appliance
requirement
Diagram shows L

Only possible with touch opening.

Wall unit for extractor COHD9093 90 559 589 632 738 814 889 980 1069
2 doors
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender in two parts
1 shelf below according to appliance
requirement

Only possible with touch opening.

Smaller appliances can also be positioned eccentrically.

The hose covering above the intermediate shelf can be individually positioned and adjusted on site.
Only intended for installation of ventilation components.
Necessary to state appliance.
Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)

Wall unit for extractor COHD6093D L/R 60 449 476 506 604 672 739 820 950
1 door
1 fixed shelf

Only possible with touch opening.

Necessary to state appliance.
Diagram shows L

Wall unit for extractor COHD9093D 90 528 565 644 760 859 962 1074 1233
2 doors COHD12093D 120 656 704 834 978 1117 1254 1413 1616
1 fixed shelf

Only possible with touch opening.

Necessary to state appliance.

Permitted appliances:
Elica: BOXIN PLUS, GLASSOUT, FILO, INSIDE
Falmec: MOVE, VIRGOLA
Novy: FUSION PRO

1/2022 63.03
 Price group
Wall units with extractor ELICA
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit with extractor COHD6093DE L/R 60 664 680 699 760 803 845 895 976
1 door
1 fixed shelf
1 extractor 34 cm deep

Only possible with touch opening.

Diagram shows L Appliance description see page 60.03.

Wall unit with extractor COHD9093DE 90 753 776 825 898 960 1024 1094 1192
2 doors COHD12093DE 120 935 966 1046 1136 1222 1308 1408 1533
1 fixed shelf
1 extractor 34 cm deep

Only possible with touch opening.

Appliance description see page 60.03.

Recirculating set DEUMS 58

Set for on-site conversion
consisting of:
1 air circulation filter
1 recirculation pipe with ventilation grille

Price group
Wall units with sliding doors
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit with sliding doors COSS12093T2 120 1474 1499 1546 1623 1683 1743 1823 1988
consisting of: COSS16093T2 160 1591 1620 1673 1763 1831 1900 1993 2172
2 sliding doors on one front level COSS18093T2 180 1681 1712 1773 1875 1952 2030 2132 2324
1 carcase, left in half the planning width
Cupboard width 120, 160, 180 cm:
1 carcase, right in half the planning width
Not available in IOS-C, IOS-M-C
3 adjustable shelves per carcase
1 fitting-set for on-site installation
1 grip profile in the lower shelf

Sliding doors in closed position on one level.

Guide-fitting on top shelf, top cupboard not possible.
Installation space above at least 3 cm.
The cupboard is supplied in separate modules.
Width alterations not possible!

Price group
Interior+ wall units
Carcase height 92.75 cm, carcase depth 34 cm
Neutral

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Interior+ base wall unit CO5093I L/R 50 247 267 290 341 390 437 466 510
1 door CO6093I L/R 60 266 282 302 367 414 459 513 559
3 adjustable shelves (depth 15 cm)
1 grip profile in the lower shelf
additional Interior+ swing-out frame
essential
Diagram shows L
Interior+ swing-out frame For cupboard width 50 cm
1 swing-out frame with: IP5093 963
2 adjustable profile shelves For cupboard width 60 cm
6 railings IP6093 1007

63.04 1/2022
 Price group
Interior+ wall units
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Interior+ base wall unit CO10093I 100 365 400 453 547 628 706 783 854
2 doors
3 adjustable shelves (depth 15 cm)
1 grip profile in the lower shelf
additional Interior+ swing-out frame
essential

Interior+ swing-out frame For cupboard width 100 cm

2 swing-out frames with each: IP10093 1900
2 adjustable profile shelves
6 railings

Possible accessories
precise description see page 90.34.

Interior+ shelf IP50B 50 155

IP60B 60 160

Interior+ railing IP50R 50 73

IP60R 60 74

Interior+ glass jar set IPGD3 72

IPGD4 94

Interior+ container IP1423C 67

IP1435C 67

Interior+ spice jar swing-out frame IPGR L/R 237

2 fixed profile shelves
height 37.9 cm, width 37.9 cm,
depth 9 cm
Cupboard prepared for on-site installation

Available for standard wall units from

Diagram shows L 50 cm width and from 53 cm height.
Turning position as hinged side of door.
For two-door cupboards, state hinged side
right or left.

Interior+ glass railing insert IPGRE 38

1 insert with glass railing
height 7.7 cm, width 34.8 cm

For use with Interior+ spice jar swing-out frame.

Surface style
Wall shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 92.75 cm, shelf unit depth 36.2 cm

Neutral

FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit OR3093 10-30 236 258 334 462 - 514 589 505
3 adjustable shelves OR4093 30-40 272 295 390 528 - 587 672 579
OR4593 40-45 291 314 418 560 - 624 714 615
Widths in mm grid variably available. OR5093 45-50 309 332 445 592 - 660 755 651
Please state desired width. OR6093 50-60 345 369 501 658 - 733 840 723
OR9093 60-90 454 480 668 854 - 952 1091 941

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.
If the exterior of the shelves is requested to be the same colour as the inside, please confirm type AN EINREG.

1/2022 63.05
 Surface style
Wall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 92.75 cm, shelf unit depth 36.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit, O3R3093 10-30 326 350 434 571 600 628 710 631
thick 2.8 cm O3R6093 30-60 453 480 629 802 845 887 1007 888
back panel with circumferential shadow joint O3R9093 60-90 579 609 822 1032 1088 1144 1303 1143
and suspension fixing
3 shelves

Shelf unit interior colour = shelf unit exterior colour.

Widths in mm grid variably available.
Please state desired width.

Price group
Wall units
Carcase height 119.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit CO30119 L/R 30 310 338 367 417 452 483 543 592
1 door CO40119 L/R 40 341 354 374 426 473 520 572 622
3 adjustable shelves CO45119 L/R 45 343 357 379 445 506 567 598 652
1 grip profile in the lower shelf CO50119 L/R 50 351 363 390 465 522 601 615 670
CO60119 L/R 60 367 385 415 489 545 634 676 737

Diagram shows L

Interior+ spice jar swing-out frame IPGR L/R 237

2 fixed profile shelves
height 37.9 cm, width 37.9 cm,
depth 9 cm
Cupboard prepared for on-site installation

Available for standard wall units from

Diagram shows L 50 cm width and from 53 cm height.
Turning position as hinged side of door.
For two-door cupboards, state hinged side
right or left.

Interior+ glass railing insert IPGRE 38

1 insert with glass railing
height 7.7 cm, width 34.8 cm

For use with Interior+ spice jar swing-out frame.

Wall unit microwave housing COM50119 L/R 50 290 301 331 369 394 416 490 533
1 door COM60119 L/R 60 302 318 352 395 428 462 519 567
2 adjustable shelves
1 appliance niche

Only possible with touch opening.

For microwave (built-in trim kit
will be necessary).
Diagram shows L Please state appliance model on order!

63.06 1/2022
 Price group
Wall units for extractor
Carcase height 119.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit for extractor COHS60119 L/R 60 452 475 493 576 631 686 734 799
1 door
up to 5 shelves, 8.5 cm deep
1 construction shelf

Only possible with touch opening.

Diagram shows L

Necessary to state appliance.

Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)
Cupboard division dependent on appliance.

Wall unit for extractor COHD60119 L/R 60 452 475 493 576 631 686 734 799
1 door
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender
1 shelf below according to appliance
requirement
Diagram shows L
Only possible with touch opening.

The hose covering above the intermediate shelf can be individually positioned and adjusted on site.
Only intended for installation of ventilation components.
Necessary to state appliance.
Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)

Wall unit for extractor COHD60119D L/R 60 516 553 578 686 765 843 938 1077
1 door
1 fixed shelf

Only possible with touch opening.

Necessary to state appliance.

Diagram shows L

Permitted appliances:
Elica: BOXIN PLUS, GLASSOUT, FILO, INSIDE
Falmec: MOVE, VIRGOLA
Novy: FUSION PRO

Price group
Wall units with extractor ELICA
Carcase height 119.25 cm, carcase depth 34 cm

Neutral

Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8

Wall unit with extractor COHD60119DE L/R 60 705 729 744 812 860 909 969 1056
1 door
1 fixed shelf
1 extractor 34 cm deep

Only possible with touch opening.

Appliance description see page 60.03.
Diagram shows L

Recirculating set DEUMS 58

Set for on-site conversion
consisting of:
1 air circulation filter
1 recirculation pipe with ventilation grille

1/2022 63.07
 Surface style
Wall shelf units Descriptions / colours see surround accessories chapter 11.

Carcase height 119.25 cm, shelf unit depth 36.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit OR30119 10-30 274 296 404 578 - 644 737 634
4 adjustable shelves OR40119 30-40 316 341 472 646 - 717 822 715
OR45119 40-45 341 362 504 678 - 753 866 751
Widths in mm grid variably available. OR50119 45-50 361 386 537 710 - 792 905 792
Please state desired width. OR60119 50-60 405 429 603 778 - 867 994 865

Carcase exterior sides colour matching interior free of charge, under and top view in standard carcase colour 273 / 284.
Please state visible side.
If the exterior of the shelves is requested to be the same colour as the inside, please confirm type AN EINREG.

Surface style
Wall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 119.25 cm, shelf unit depth 36.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit, O3R30119 10-30 364 387 529 706 743 780 886 786
thick 2.8 cm O3R60119 30-60 540 563 756 934 983 1031 1178 1040
back panel with circumferential shadow joint O3R90119 60-90 716 739 984 1159 1219 1278 1466 1292
and suspension fixing
3 shelves

Shelf unit interior colour = shelf unit exterior colour.

Widths in mm grid variably available.
Please state desired width.

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 92.75 cm
Side depth 34 cm FS9334 L/R 34 0 0 69 97 136 171 88
Side depth 56 cm FS9356 L/R 56 0 0 114 165 232 289 151

Carcase height 119.25 cm

Diagram shows L Side depth 34 cm FS11934 L/R 34 0 0 79 116 174 217 114

Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all wall units FSOL L/R 46 46 - - - - -

Leading edge as carcase exterior side.

Diagram shows L

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“ on page 10.07.

63.08 1/2022
 Price group
End panels
Width 5 cm

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit end panel Carcase height 92.75 cm
Front finish Depth 36.2 cm
wall-bound solution (one-sided) COW59336 L/R 5 244 253 273 305 327 351 369 396
Width 5 cm
Carcase height 119.25 cm
Please state the relevant L/R. Depth 36.2 cm
Diagram shows L
The end panel width is always 5 cm. COW511936 L/R 5 245 254 276 307 330 354 372 400

Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit blender Carcase height 92.75 cm
Front finish COP2093 L/R 20 68 69 71 89 97 103 111 121

Front finish blenders are manufactured with a maximum Carcase height 119.25 cm
20 cm width. COP20119 L/R 20 77 78 80 102 110 118 127 138

Diagram shows L

Wall unit blender Carcase height 92.75 cm

with sides, shelf below and above COPB2093 20 122 123 125 142 151 157 164 174
Bottom in carcase colour
Front finish Carcase height 119.25 cm
COPB20119 20 130 131 133 156 163 171 180 191
Front finish blenders are manufactured with a maximum
20 cm width.

Wall unit corner blender 90° Carcase height 92.75 cm

Front finish COPE93 10 125 127 133 157 174 190 200 218

freely selectable leg measurement Carcase height 119.25 cm

from 4 x 4 cm to 10 x 10 cm width COPE119 10 160 162 171 185 216 242 256 281

Flush with front.

4 Please state rear length (inside measurement)
from l to r on order.
4

Wall unit corner blender 90° Carcase height 92.75 cm

with sides, shelf below and above COPEB93 10 294 296 302 326 343 359 368 387
Bottom in carcase colour
Front finish Carcase height 119.25 cm
freely selectable leg measurement COPEB119 10 329 331 340 355 385 410 426 450
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Wall unit corner blender Carcase height 92.75 cm

Front finish COPEW93 10 135 142 156 169 189 212 218 237

Freely selectable angle up to max. 270° Carcase height 119.25 cm

(Programme BOSSA-C permitted up to 180°) COPEW119 10 170 174 182 195 231 266 276 299
and freely selectable leg measurement from
Carcase height 92.75 / 119.25 cm:
2 x 2 cm up to 10 x 10 cm width
Not available in IOS-C, IOS-M-C
2
Flush with front.
Please state rear length (inside measurement)
2

from l to r on order.

1/2022 63.09
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall unit corner blender Carcase height 92.75 cm
with sides, shelf below and above COPEWB93 10 313 318 333 346 367 389 395 415
Bottom in carcase colour
Front finish Carcase height 119.25 cm
Freely selectable angle up to max. 270° COPEWB119 10 347 352 360 373 407 443 453 476
(Programme BOSSA-C permitted up to 180°)
Carcase height 92.75 / 119.25 cm:
and freely selectable leg measurement from
Not available in IOS-C, IOS-M-C
2 x 2 cm up to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall unit blender Carcase height 92.75 cm
flush with carcase OSB2093 20 43 44 46 61 68 74 86 58

Carcase height 119.25 cm

OSB20119 20 49 54 58 76 83 90 104 71

Price group
Original fronts

Neutral
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Front part height 92.5 cm CFT020093 20 104 119 138 181 220 243 292 335
CFT030093 30 104 119 138 181 220 243 292 335
Please state intended purpose. CFT040093 40 112 123 152 185 229 265 304 349
CFT045093 45 117 126 156 192 239 279 318 361
CFT050093 50 117 128 159 199 248 290 331 374
CFT060093 60 126 136 174 221 279 317 372 423

Front part height 119.0 cm CFT020119 20 124 158 162 217 285 299 352 408
CFT030119 30 124 158 162 217 285 299 352 408
Please state intended purpose. CFT040119 40 135 162 174 219 287 324 364 423
CFT045119 45 148 162 179 230 304 343 379 435
CFT050119 50 154 173 186 261 340 382 433 495
CFT060119 60 163 181 204 284 365 408 474 543

63.10 1/2022
AVANCE
Wall units, carcase height 53.0 cm

Wall units - Carcase height 53.0 cm, carcase depth 34 cm 65. 01

Wall units for extractor - Carcase height 53.0 cm, carcase depth 34 cm 65. 01-02

Wall units with extractor ELICA - Carcase height 53.0 cm, carcase depth 34 cm 65. 02

Swing flap door wall units - Carcase height 53.0 cm, carcase depth 34 cm 65. 03

Wall units with sliding doors - Carcase height 53.0 cm, carcase depth 34 cm 65. 03

Wall shelf units, thick 2.8 cm - Carcase height 54.7 cm, shelf unit depth 36.2 cm 65. 04

Visible carcase sides 65. 04

End panels 65. 04

Blenders 65. 05

Blenders 65. 06

Original fronts 65. 06

Wall units
AVANCE

53.0 cm
65.

1/2022 65.
 AVANCE
Wall units, carcase height 53.0 cm
T: Cupboard depth cm
H: Cupboard height cm

Wall units Extractor units Swing flap door Sliding doors Shelves

65.01 T: 36 cm 65.01 T: 36 cm 65.03 T: 36 cm 65.03 T: 36 cm 65.04 T: 36 cm

AO 30 53 AOHS 90 53 BL AOSK 45 53 AOSS 120 53 T2 AO3R 30 55
AO 40 53 AOHS 100 53 BL AOSK 50 53 AOSS 160 53 T2 AO3R 60 55
AO 45 53 AOHS 120 53 BL AOSK 60 53 AOSS 180 53 T2 AO3R 90 55
AO 50 53 AOSK 80 53
AO 60 53 AOSK 90 53
AOSK 100 53
AOSK 120 53
65.01 T: 36 cm 65.02 T: 36 cm 65.03 T: 36 cm
AO 80 53 AOHD 60 53 AOSKS 150 53
AO 90 53
AO 100 53

65.01 T: 36 cm 65.02 T: 36 cm 65.03 T: 36 cm

AOK 30 53 AOHD 90 53 AOSKS 180 53
AOK 40 53
AOK 45 53
AOK 50 53
AOK 60 53
AOK 80 53
AOK 90 53
AOK 100 53
AOK 120 53 65.02 T: 36 cm 65.03 T: 36 cm
65.01
AOHD 60 53 D AOSKS 200 53
T: 36 cm
AOM 50 53
AOM 60 53

65.02 T: 36 cm
AOHD 90 53 D
AOHD 120 53 D

65.02 T: 36 cm
AOHD 60 53 DE

65.02 T: 36 cm
AOHD 90 53 DE
AOHD 120 53 DE
Wall units
AVANCE

53.0 cm

65.

65. 1/2022
 Price group
Wall units
Carcase height 53.0 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit AO3053 L/R 30 177 193 200 226 261 295 317
1 door AO4053 L/R 40 181 199 212 239 279 316 340
1 adjustable shelf AO4553 L/R 45 184 204 217 241 284 325 347
AO5053 L/R 50 190 209 222 254 294 333 355
AO6053 L/R 60 200 216 227 267 316 367 391

Diagram shows L

Wall unit AO8053 80 295 317 345 378 463 548 583
2 doors AO9053 90 298 323 360 398 482 569 609
1 adjustable shelf AO10053 100 317 342 367 404 508 608 652

Interior+ spice jar swing-out frame IPGR L/R 237

2 fixed profile shelves
height 37.9 cm, width 37.9 cm,
depth 9 cm
Cupboard prepared for on-site installation

Available for standard wall units from

Diagram shows L 50 cm width and from 53 cm height.
Turning position as hinged side of door.
For two-door cupboards, state hinged side
right or left.

Interior+ glass railing insert IPGRE 38

1 insert with glass railing
height 7.7 cm, width 34.8 cm

For use with Interior+ spice jar swing-out frame.

Flap wall unit AOK3053 30 277 293 317 338 377 417 426
1 top hinged door AOK4053 40 283 300 324 349 389 426 437
1 adjustable shelf AOK4553 45 286 304 327 356 394 431 450
AOK5053 50 290 307 330 361 399 435 460
Electric drive mechanism see page 10.18. AOK6053 60 296 316 335 374 408 445 482
With 120 cm width with centre panel and AOK8053 80 404 431 452 526 611 695 716
2 adjustable shelves. AOK9053 90 451 493 527 595 695 795 821
AOK10053 100 495 539 580 643 752 858 878
AOK12053 120 556 607 665 725 843 961 977

Wall unit microwave housing AOM5053 50 221 236 260 269 294 321 339
1 fixed blender AOM6053 60 225 244 266 277 313 351 374
1 appliance niche

Carcase 1.7 cm higher than the normal carcase!

Top hinged door with touch opening.
For microwave (built-in trim kit will be necessary).
Please state appliance model on order!

Price group
Wall units for extractor
Carcase height 53.0 cm, carcase depth 34 cm
Neutral

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Wall unit for extractor AOHS9053BL 90 458 522 546 555 592 630 770
1 removable front blender AOHS10053BL 100 505 569 606 612 652 691 871
AOHS12053BL 120 609 679 729 744 788 830 994
Necessary to state appliance.

1/2022 65.01
 Price group
Wall units for extractor
Carcase height 53.0 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit for extractor AOHD6053 L/R 60 349 377 390 428 511 538 553
1 door
1 hose covering above intermediate shelf
1 fixed shelf
Diagram shows L
1 inner blender
1 shelf below according to appliance
requirement

Wall unit for extractor AOHD9053 90 470 536 560 571 613 647 791
2 doors
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender in two parts
1 shelf below according to appliance
requirement

Smaller appliances can also be positioned eccentrically.

The hose covering above the intermediate shelf can be individually positioned and adjusted on site.
Only intended for installation of ventilation components.
Necessary to state appliance.
Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)

Wall unit for extractor AOHD6053D L/R 60 353 376 393 451 526 604 639
1 door
1 fixed shelf

Necessary to state appliance.

Diagram shows L

Wall unit for extractor AOHD9053D 90 459 489 543 594 706 822 878
2 doors AOHD12053D 120 602 645 731 784 942 1103 1180
1 fixed shelf

Necessary to state appliance.

Permitted appliances:
Elica: BOXIN PLUS, GLASSOUT, FILO, INSIDE
Falmec: MOVE, VIRGOLA
Novy: FUSION PRO

Price group
Wall units with extractor ELICA
Carcase height 53.0 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit with extractor AOHD6053DE L/R 60 604 618 629 665 712 760 782
1 door
1 fixed shelf
1 extractor 34 cm deep
Diagram shows L
Appliance description see page 60.03.

Wall unit with extractor AOHD9053DE 90 709 729 762 794 864 937 971
2 doors AOHD12053DE 120 902 929 982 1015 1114 1214 1263
1 fixed shelf
1 extractor 34 cm deep

Appliance description see page 60.03.

Recirculating set DEUMS 58

Set for on-site conversion
consisting of:
1 air circulation filter
1 recirculation pipe with ventilation grille

65.02 1/2022
 Price group
Swing flap door wall units
Carcase height 53.0 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Swing flap door wall unit AOSK4553 45 384 393 410 449 489 528 541
1 swing flap door AOSK5053 50 390 402 424 466 514 559 574
1 adjustable shelf AOSK6053 60 396 426 445 489 541 594 606
AOSK8053 80 473 510 535 588 649 708 725
With 120 cm width with centre panel and AOSK9053 90 511 550 581 640 704 767 785
2 adjustable shelves. AOSK10053 100 548 595 627 690 758 826 845
AOSK12053 120 626 677 719 791 868 944 966

Swing flap door wall unit AOSKS15053 L/R 150 817 882 924 1016 1120 1222 1250
consisting of:
Not available in MINERA-A, TOCCO-A
1 swing flap door
1 carcase AOSK 90 53
1 carcase AOSK 60 53
1 adjustable shelf per carcase

Diagram shows L The positioning of the widest carcase is

determined by the style L/R.

Swing flap door wall unit AOSKS18053 180 917 993 1046 1151 1268 1381 1413
consisting of:
Not available in MINERA-A, TOCCO-A
1 swing flap door
2 carcases AOSK 90 53
1 adjustable shelf per carcase

Swing flap door wall unit AOSKS20053 200 989 1070 1128 1242 1364 1487 1520
consisting of:
Not available in MINERA-A, TOCCO-A
1 swing flap door
2 carcases AOSK 100 53
1 adjustable shelf per carcase

Allow at least 18 cm space above the cupboard.

Electric drive mechanism see page 10.18.

Swing flap door wall units from 150 cm width can be reduced in cupboard module free of charge.

Price group
Wall units with sliding doors
Carcase height 53.0 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit with sliding doors AOSS12053T2 120 1437 1454 1470 1532 1638 1741 1754
consisting of: AOSS16053T2 160 1559 1580 1601 1678 1802 1926 1937
2 sliding doors on one front level AOSS18053T2 180 1652 1679 1706 1796 1941 2082 2094
1 carcase, left in half the planning width
1 carcase, right in half the planning width
1 adjustable shelf per carcase
1 fitting-set for on-site installation

Sliding doors in closed position on one level.

Guide-fitting on top shelf, top cupboard not possible.
Installation space above at least 3 cm.
The cupboard is supplied in separate modules.
Width alterations not possible!

1/2022 65.03
 Surface style
Wall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 54.7 cm, shelf unit depth 36.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit, AO3R3055 10-30 239 261 286 365 382 398 449 401
thick 2.8 cm AO3R6055 30-60 310 336 405 541 568 595 670 584
back panel with circumferential shadow joint AO3R9055 60-90 381 411 524 717 755 792 891 767
and suspension fixing

Shelf unit interior colour = shelf unit exterior colour.

Widths in mm grid variably available.
Please state desired width.

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 53.0 cm
Side depth 34 cm FS5334 L/R 34 0 0 44 65 93 117 62
Side depth 56 cm FS5356 L/R 56 0 0 65 93 129 161 84

Leading edge as carcase exterior side.

Diagram shows L

Visible carcase side .

for additional planning
for all wall units FSOL L/R 46 46 - - - - -

Leading edge as carcase exterior side.

Diagram shows L

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“ on page 10.07.

Price group
End panels
Width 5 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit end panel Carcase height 53.0 cm
Front finish Depth 36.2 cm
wall-bound solution (one-sided) AOW55336 L/R 5 225 236 253 287 325 364 391
Width 5 cm

Please state the relevant L/R.

Diagram shows L
The end panel width is always 5 cm.

65.04 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit blender Carcase height 53.0 cm
Front finish AOP2053 L/R 20 58 61 68 71 79 87 104

Front finish blenders are manufactured with a maximum

20 cm width.

Diagram shows L

Wall unit blender Carcase height 53.0 cm

with sides, shelf below and above AOPB2053 20 111 115 122 125 132 139 158
Bottom in carcase colour
Front finish

Front finish blenders are manufactured with a maximum

20 cm width.

Wall unit corner blender 90° Carcase height 53.0 cm

Front finish AOPE53 10 98 103 109 117 129 143 178
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
4 from l to r on order.
4

Wall unit corner blender 90° Carcase height 53.0 cm

with sides, shelf below and above AOPEB53 10 268 273 278 285 298 311 347
Bottom in carcase colour
Front finish
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Wall unit corner blender Carcase height 53.0 cm

Front finish AOPEW53 10 105 116 122 127 136 149 182
Freely selectable angle up to max. 270°
and freely selectable leg measurement from
2 x 2 cm up to 10 x 10 cm width

Flush with front.

2
Please state rear length (inside measurement)
from l to r on order.
2

Wall unit corner blender Carcase height 53.0 cm

with sides, shelf below and above AOPEWB53 10 283 293 299 304 314 326 360
Bottom in carcase colour
Front finish
Freely selectable angle up to max. 270°
and freely selectable leg measurement from
2 x 2 cm up to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

1/2022 65.05
 Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall unit blender Carcase height 53.0 cm
flush with carcase OSB2053 20 29 32 37 47 51 55 65 47

Price group
Original fronts

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Front part height 54.45 cm AFT030053 30 97 102 127 146 179 215 242
AFT040053 40 100 107 131 151 185 223 253
Please state intended purpose. AFT045053 45 103 111 135 156 192 232 265
AFT050053 50 107 115 140 160 200 240 275
AFT060053 60 114 120 148 165 213 255 292
AFT080053 80 129 135 168 183 239 295 338
AFT090053 90 149 160 185 208 278 347 393
AFT100053 100 181 193 227 246 342 435 492
AFT120053 120 204 213 235 261 363 465 539

65.06 1/2022
AVANCE
Wall units, carcase height 66.25 cm

Wall units - Carcase height 66.25 cm, carcase depth 34 cm 66. 01

Corner wall units - Carcase height 66.25 cm, carcase depth 34 cm 66. 01-02

Wall units for extractor - Carcase height 66.25 cm, carcase depth 34 cm 66. 02-03

Wall units with extractor ELICA - Carcase height 66.25 cm, carcase depth 34 cm 66. 03

Swing flap door wall units - Carcase height 66.25 cm, carcase depth 34 cm 66. 04

Wall units with fold-up doors - Carcase height 66.25 cm, carcase depth 34 cm 66. 04

Wall units with sliding doors - Carcase height 66.25 cm, carcase depth 34 cm 66. 05

Interior+ wall units - Carcase height 66.25 cm, carcase depth 34 cm 66. 05-06

Wall shelf units, thick 2.8 cm - Carcase height 67.95 cm, shelf unit depth 36.2 cm 66. 06

Visible carcase sides 66. 06

End panels 66. 06

Blenders 66. 07

Blenders 66. 08

Original fronts 66. 08

Wall units
66.25 cm
AVANCE
66.

1/2022 66.
 AVANCE
Wall units, carcase height 66.25 cm
T: Cupboard depth cm
H: Cupboard height cm

Wall unit Extractor units Swing flap door Sliding doors Shelves

66.01 T: 36 cm 66.02 T: 36 cm 66.04 T: 36 cm 66.05 T: 36 cm 66.06 T: 36 cm

AO 20 66 AOHS 60 66 AOSK 45 66 AOSS 120 66 T2 AO3R 30 68
AO 30 66 AOSK 50 66 AOSS 160 66 T2 AO3R 60 68
AO 40 66 AOSK 60 66 AOSS 180 66 T2 AO3R 90 68
AO 45 66 AOSK 80 66
AO 50 66 AOSK 90 66
AO 60 66 AOSK 100 66
AOSK 120 66
66.01 T: 36 cm 66.02 T: 36 cm 66.04 T: 36 cm
AO 80 66 AOHS 90 66 AOSKS 150 66
AO 90 66
AO 100 66

Interior+

66.01 T: 36 cm 66.03 T: 36 cm 66.04 T: 36 cm 66.05 T: 36 cm

AOM 50 66 AOHD 60 66 AOSKS 180 66 AO 50 66 I
AOM 60 66 AO 60 66 I

66.01 T: 36 cm 66.03 T: 36 cm 66.04 T: 36 cm 66.05 T: 36 cm

AO 60 66 T AOHD 90 66 AOSKS 200 66 AO 100 66 I

66.01 T: 36 cm 66.03 T: 36 cm
AO 90 66 T AOHD 60 66 D

Fold-up door

66.03 T: 36 cm 66.04 T: 36 cm
AOHD 90 66 D AOFK 60 66
AOHD 120 66 D AOFK 80 66
AOFK 90 66
AOFK 100 66
Corner units AOFK 120 66

66.01 T: 36 cm 66.03 T: 36 cm
AOEE 80 66 AOHD 60 66 DE
AOEE 90 66

66.01 T: 36 cm 66.03 T: 36 cm
AOE 60 66 AOHD 90 66 DE
AOHD 120 66 DE

66.02 T: 36 cm
AOE 65 66
Wall units
66.25 cm
AVANCE

66.02 T: 36 cm
AOE 60 66 T2

66.

66.02 T: 36 cm
AOE 65 66 T2

66.02 T: 36 cm
AOED 60 66

66. 1/2022
 Price group
Wall units
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit AO2066 L/R 20 195 215 227 249 293 335 357
1 door AO3066 L/R 30 195 215 227 249 293 335 357
2 adjustable shelves AO4066 L/R 40 203 218 236 266 307 353 377
AO4566 L/R 45 207 221 240 270 314 361 387
AO5066 L/R 50 213 225 246 281 326 370 396
Diagram shows L AO6066 L/R 60 220 232 253 295 349 403 432

Wall unit AO8066 80 312 339 370 407 496 583 624
2 doors AO9066 90 316 342 389 427 518 607 651
2 adjustable shelves AO10066 100 339 358 393 434 540 646 691

Wall unit microwave housing AOM5066 50 230 246 268 284 314 346 367
1 top hinged door AOM6066 60 237 255 277 296 339 379 404
1 appliance niche

Carcase 1.7 cm higher than the normal carcase!

Top hinged door with touch opening.
For microwave (built-in trim kit will be necessary).
Please state appliance model on order!

Air-drying wall unit for plates AO6066T L/R 60 310 339 353 398 455 511 533
1 door
2 chromium plated wire mesh inserts
1 removable drain tray

Diagram shows L

Air-drying wall unit for plates AO9066T 90 427 461 510 560 649 736 770
2 doors
2 chromium plated wire mesh inserts
1 removable drain tray

Price group
Corner wall units
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Please note planning instructions on page 60.02!

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Corner wall unit .
Planning depth 41.7 cm Door width 40 cm
Planning dimension 81.7 cm (78 - 94 cm) AOEE8066 L/R 80 391 423 461 509 606 704 744
Door width 50 cm
Planning dimension 91.7 cm (88 - 104 cm) AOEE9066 L/R 90 419 453 499 547 642 736 781
1 door
Diagram shows L 2 adjustable shelves
1 inner blender with angle blender AOPEEW866 8 0 0 0 0 0 0 0
1.7 Actual space
adjustable from 4 to 10 cm
Extra charge per 5 cm additional AMPTP5 5 11 14 14 17 21 24 35
Pl.depth

34 80/90
width (up to max. 20 cm)
7.7
Door width
Attention: imperative to state the actual planning
measurement. The angle blender AOPEEW 8 .. is
adjusted at factory.

Corner wall unit AOE6066 L/R 60 399 432 459 506 592 679 728
rear length 60 x 60 cm
1 double hinged door
2 adjustable shelves

Do not plan protruding items such as extractors etc.

in the front elevation.
Diagram shows L

1/2022 66.01
 Price group
Corner wall units
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Please note planning instructions on page 60.02!

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Corner wall unit AOE6566 L/R 65 428 462 499 547 639 731 782
rear length 65 x 65 cm
1 double hinged door
2 adjustable shelves

Do not plan protruding items such as extractors etc.

in the front elevation.
Diagram shows L

Corner wall unit AOE6066T2 L/R 60 399 432 459 506 592 679 728
rear length 60 x 60 cm
2 doors with wide angle hinges
2 adjustable shelves

Style left/right determines the hinged side of the

less wide door, which must be opened first.
Do not plan protruding items such as extractors etc.
in the front elevation.

Corner wall unit AOE6566T2 L/R 65 428 462 499 547 639 731 782
rear length 65 x 65 cm
2 doors with wide angle hinges
2 adjustable shelves

Style left/right determines the hinged side of the

less wide door, which must be opened first.
Do not plan protruding items such as extractors etc.
in the front elevation.

Diagonal corner wall unit 135° AOED6066 L/R 60 467 505 539 569 640 710 758
1 door
2 corner blenders
2 adjustable shelves

Diagram shows L

Price group
Wall units for extractor
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit for extractor AOHS6066 L/R 60 368 398 414 456 516 575 595
1 door
up to 3 shelves, 8.5 cm deep
1 construction shelf
Cupboard division dependent on appliance.

Diagram shows L

Wall unit for extractor AOHS9066 90 522 567 612 674 760 845 877
2 doors
up to 3 shelves, 8.5 cm deep
1 construction shelf
Cupboard division dependent on appliance.

Necessary to state appliance.

Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)
When using a pull-out extractor, the carcase is 1.7 cm higher than the normal carcase and doors have touch opening resp. swing flap doors needs an electric
drive!

66.02 1/2022
 Price group
Wall units for extractor
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit for extractor AOHD6066 L/R 60 368 398 414 456 516 575 595
1 door
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender
Diagram shows L 1 shelf below according to appliance
requirement

Wall unit for extractor AOHD9066 90 522 567 612 674 760 845 877
2 doors
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender in two parts
1 shelf below according to appliance
requirement

Smaller appliances can also be positioned eccentrically.

The hose covering above the intermediate shelf can be individually positioned and adjusted on site.
Only intended for installation of ventilation components.
Necessary to state appliance.
Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)

Wall unit for extractor AOHD6066D L/R 60 384 400 434 494 577 659 699
1 door
1 fixed shelf

Necessary to state appliance.

Diagram shows L

Wall unit for extractor AOHD9066D 90 483 516 580 632 755 875 935
2 doors AOHD12066D 120 624 676 771 820 992 1157 1239
1 fixed shelf

Necessary to state appliance.

Permitted appliances:
Elica: BOXIN PLUS, GLASSOUT, FILO, INSIDE
Falmec: MOVE, VIRGOLA
Novy: FUSION PRO

Price group
Wall units with extractor ELICA
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit with extractor AOHD6066DE L/R 60 622 633 655 692 743 795 820
1 door
1 fixed shelf
1 extractor 34 cm deep

Diagram shows L Appliance description see page 60.03.

Wall unit with extractor AOHD9066DE 90 725 746 785 818 894 969 1006
2 doors AOHD12066DE 120 915 948 1007 1038 1145 1248 1299
1 fixed shelf
1 extractor 34 cm deep

Appliance description see page 60.03.

Recirculating set DEUMS 58

Set for on-site conversion
consisting of:
1 air circulation filter
1 recirculation pipe with ventilation grille

1/2022 66.03
 Price group
Swing flap door wall units
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Swing flap door wall unit AOSK4566 45 391 416 436 485 527 571 583
1 swing flap door AOSK5066 50 407 423 440 486 548 608 614
2 adjustable shelves AOSK6066 60 414 439 459 509 575 641 648
AOSK8066 80 491 515 549 609 683 758 779
With 120 cm width with centre panel and AOSK9066 90 528 550 597 659 738 817 848
4 adjustable shelves. AOSK10066 100 586 609 665 733 819 904 938
AOSK12066 120 643 666 732 808 900 993 1027

Swing flap door wall unit AOSKS15066 L/R 150 849 892 951 1051 1182 1311 1340
consisting of:
Not available in MINERA-A, TOCCO-A
1 swing flap door
1 carcase AOSK 90 66
1 carcase AOSK 60 66
2 adjustable shelves per carcase

Diagram shows L The positioning of the widest carcase is

determined by the style L/R.

Swing flap door wall unit AOSKS18066 180 953 993 1072 1185 1328 1469 1526
consisting of:
Not available in MINERA-A, TOCCO-A
1 swing flap door
2 carcases AOSK 90 66
2 adjustable shelves per carcase

Swing flap door wall unit AOSKS20066 200 1022 1061 1154 1277 1426 1575 1634
consisting of:
Not available in MINERA-A, TOCCO-A
1 swing flap door
2 carcases AOSK 100 66
2 adjustable shelves per carcase

Allow at least 18 cm space above the cupboard.

Electric drive mechanism see page 10.18.

Swing flap door wall units from 150 cm width can be reduced in cupboard module free of charge.

Price group
Wall units with fold-up doors
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit with fold-up doors AOFK6066 60 565 610 609 680 725 776 795
2 fold-up doors in programme style AOFK8066 80 633 688 678 757 805 859 879
2 adjustable shelves AOFK9066 90 663 727 711 795 846 901 920
AOFK10066 100 732 799 784 860 916 978 991
With 120 cm width with centre panel and AOFK12066 120 793 866 845 912 976 1044 1047
4 adjustable shelves.

Please allow at least 21.5 cm free space above the cupboard. By using the provided opening inhibitor, the measurement is reduced to 12 cm.
Electric drive mechanism see page 10.18.

66.04 1/2022
 Price group
Wall units with sliding doors
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit with sliding doors AOSS12066T2 120 1468 1487 1514 1584 1706 1826 1837
consisting of: AOSS16066T2 160 1589 1615 1646 1730 1872 2011 2021
2 sliding doors on one front level AOSS18066T2 180 1683 1710 1752 1848 2008 2169 2179
1 carcase, left in half the planning width
1 carcase, right in half the planning width
2 adjustable shelves per carcase
1 fitting-set for on-site installation

Sliding doors in closed position on one level.

Guide-fitting on top shelf, top cupboard not possible.
Installation space above at least 3 cm.
The cupboard is supplied in separate modules.
Width alterations not possible!

Price group
Interior+ wall units
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Interior+ base wall unit AO5066I L/R 50 213 225 246 281 326 370 396
1 door AO6066I L/R 60 220 232 253 295 349 403 432
2 adjustable shelves (depth 15 cm)
additional Interior+ swing-out frame
essential
Diagram shows L

Interior+ swing-out frame For cupboard width 50 cm

1 swing-out frame with: IP5066 798
2 adjustable profile shelves For cupboard width 60 cm
6 railings IP6066 832

Interior+ base wall unit AO10066I 100 339 358 393 434 540 646 691
2 doors
2 adjustable shelves (depth 15 cm)
additional Interior+ swing-out frame
essential

Interior+ swing-out frame For cupboard width 100 cm

2 swing-out frames with each: IP10066 1570
2 adjustable profile shelves
6 railings

Possible accessories
precise description see page 90.34.

Interior+ shelf IP50B 50 155

IP60B 60 160

Interior+ railing IP50R 50 73

IP60R 60 74

Interior+ glass jar set IPGD3 72

IPGD4 94

Interior+ container IP1423C 67

IP1435C 67

Interior+ spice jar swing-out frame IPGR L/R 237

2 fixed profile shelves
height 37.9 cm, width 37.9 cm,
depth 9 cm
Cupboard prepared for on-site installation

Available for standard wall units from

Diagram shows L 50 cm width and from 53 cm height.
Turning position as hinged side of door.
For two-door cupboards, state hinged side
right or left.

1/2022 66.05
 Price group
Interior+ wall units
Carcase height 66.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Interior+ glass railing insert IPGRE 38
1 insert with glass railing
height 7.7 cm, width 34.8 cm

For use with Interior+ spice jar swing-out frame.

Surface style
Wall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 67.95 cm, shelf unit depth 36.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit, AO3R3068 10-30 291 316 366 455 477 499 561 500
thick 2.8 cm AO3R6068 30-60 395 422 527 685 721 756 857 744
back panel with circumferential shadow joint AO3R9068 60-90 498 526 688 915 964 1013 1152 986
and suspension fixing
2 shelves

Shelf unit interior colour = shelf unit exterior colour.

Widths in mm grid variably available.
Please state desired width.

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 66.25 cm
Side depth 34 cm FS6634 L/R 34 0 0 49 72 104 130 69
Side depth 56 cm FS6656 L/R 56 0 0 77 113 161 203 108

Leading edge as carcase exterior side.

Diagram shows L

Visible carcase side .

for additional planning
for all wall units FSOL L/R 46 46 - - - - -

Leading edge as carcase exterior side.

Diagram shows L

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“ on page 10.07.

Price group
End panels
Width 5 cm
Neutral

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Wall unit end panel Carcase height 66.25 cm
Front finish Depth 36.2 cm
wall-bound solution (one-sided) AOW56636 L/R 5 227 238 255 291 329 368 396
Width 5 cm

Please state the relevant L/R.

Diagram shows L
The end panel width is always 5 cm.

66.06 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit blender Carcase height 66.25 cm
Front finish AOP2066 L/R 20 62 68 70 73 81 91 109

Front finish blenders are manufactured with a maximum

20 cm width.

Diagram shows L

Wall unit blender Carcase height 66.25 cm

with sides, shelf below and above AOPB2066 20 116 122 124 127 134 145 162
Bottom in carcase colour
Front finish

Front finish blenders are manufactured with a maximum

20 cm width.

Wall unit corner blender 90° Carcase height 66.25 cm

Front finish AOPE66 10 102 109 123 128 148 164 203
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
4 from l to r on order.
4

Wall unit corner blender 90° Carcase height 66.25 cm

with sides, shelf below and above AOPEB66 10 272 278 292 297 316 333 371
Bottom in carcase colour
Front finish
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Wall unit corner blender Carcase height 66.25 cm

Front finish AOPEW66 10 117 123 135 145 162 178 221
Freely selectable angle up to max. 270°
and freely selectable leg measurement from
2 x 2 cm up to 10 x 10 cm width

Flush with front.

2
Please state rear length (inside measurement)
from l to r on order.
2

Wall unit corner blender Carcase height 66.25 cm

with sides, shelf below and above AOPEWB66 10 294 300 313 322 340 356 398
Bottom in carcase colour
Front finish
Freely selectable angle up to max. 270°
and freely selectable leg measurement from
2 x 2 cm up to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

1/2022 66.07
 Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall unit blender Carcase height 66.25 cm
flush with carcase OSB2066 20 30 37 40 51 56 61 71 49

Price group
Original fronts

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Front part height 67.7 cm AFT020066 20 103 110 134 166 199 232 265
AFT030066 30 103 110 134 166 199 232 265
Please state intended purpose. AFT040066 40 105 116 143 172 209 242 279
AFT045066 45 116 121 146 176 213 245 283
AFT050066 50 117 123 154 180 224 267 300
AFT060066 60 123 129 160 184 233 281 317
AFT080066 80 138 146 172 203 259 314 357
AFT090066 90 168 173 195 226 303 382 434
AFT100066 100 219 223 240 272 386 500 568
AFT120066 120 234 238 254 286 409 535 607

66.08 1/2022
AVANCE
Wall units, carcase height 79.5 cm

Wall units - Carcase height 79.5 cm, carcase depth 34 cm 67. 01

Corner wall units - Carcase height 79.5 cm, carcase depth 34 cm 67. 01-02

Wall units for extractor - Carcase height 79.5 cm, carcase depth 34 cm 67. 02-03

Wall units with extractor ELICA - Carcase height 79.5 cm, carcase depth 34 cm 67. 04

Wall units with fold-up doors - Carcase height 79.5 cm, carcase depth 34 cm 67. 04

Wall units with sliding doors - Carcase height 79.5 cm, carcase depth 34 cm 67. 04

Interior+ wall units - Carcase height 79.5 cm, carcase depth 34 cm 67. 05

Wall shelf units, thick 2.8 cm - Carcase height 81.2 cm, shelf unit depth 36.2 cm 67. 06

Visible carcase sides 67. 06

End panels 67. 06

Blenders 67. 07

Blenders 67. 08

Original fronts 67. 08

Wall units
AVANCE

79.5 cm

67.

1/2022 67.
 AVANCE
Wall units, carcase height 79.5 cm
T: Cupboard depth cm
H: Cupboard height cm

Wall unit Extractor units Fold-up doors Sliding doors Shelves

67.01 T: 36 cm 67.02 T: 36 cm 67.04 T: 36 cm 67.04 T: 36 cm 67.06 T: 36 cm

AO 20 80 AOHS 60 80 AOFK 60 80 AOSS 120 80 T2 AO3R 30 82
AO 30 80 AOFK 80 80 AOSS 160 80 T2 AO3R 60 82
AO 40 80 AOFK 90 80 AOSS 180 80 T2 AO3R 90 82
AO 45 80 AOFK 100 80
AO 50 80 AOFK 120 80
AO 60 80

67.01 T: 36 cm 67.02 T: 36 cm
AO 80 80 AOHS 90 80
AO 90 80
AO 100 80

Interior+

67.01 T: 36 cm 67.03 T: 36 cm 67.05 T: 36 cm

AOM 50 80 AOHD 60 80 AO 50 80 I
AOM 60 80 AO 60 80 I

67.01 T: 36 cm 67.03 T: 36 cm 67.05 T: 36 cm

AO 60 80 T AOHD 90 80 AO 100 80 I

67.01 T: 36 cm 67.03 T: 36 cm
AO 90 80 T AOHDFK 90 80
AOHDFK 100 80
AOHDFK 120 80

67.03 T: 36 cm
AOHD 60 80 D

Corner units

67.01 T: 36 cm 67.03 T: 36 cm
AOEE 80 80 AOHD 90 80 D
AOEE 90 80 AOHD 120 80 D

67.01 T: 36 cm 67.03 T: 36 cm
AOE 60 80 AOHDFK 60 80 D
AOHDFK 90 80 D
AOHDFK 120 80 D

67.02 T: 36 cm 67.04 T: 36 cm
AOE 65 80 AOHD 60 80 DE

67.02 T: 36 cm 67.04 T: 36 cm
AOE 60 80 T2 AOHD 90 80 DE
AOHD 120 80 DE

67.02 T: 36 cm 67.04 T: 36 cm
AOE 65 80 T2 AOHDFK 60 80 DE
AOHDFK 90 80 DE
Wall units

AOHDFK 120 80 DE
AVANCE

79.5 cm

67.02 T: 36 cm
67. AOED 60 80

67. 1/2022
 Price group
Wall units
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit AO2080 L/R 20 217 229 247 275 317 361 387
1 door AO3080 L/R 30 217 229 247 275 317 361 387
2 adjustable shelves AO4080 L/R 40 220 232 263 290 336 382 409
AO4580 L/R 45 222 236 267 294 343 392 417
AO5080 L/R 50 227 243 273 304 356 406 436
AO6080 L/R 60 236 253 279 323 382 439 470
Diagram shows L

Wall unit AO8080 80 340 359 404 445 536 627 671
2 doors AO9080 90 344 367 423 465 564 661 705
2 adjustable shelves AO10080 100 365 391 436 480 596 709 761

Wall unit microwave housing AOM5080 L/R 50 238 259 275 300 338 371 396
1 door AOM6080 L/R 60 248 270 288 316 362 407 436
1 appliance niche

Carcase 1.7 cm higher than the normal carcase!

Door with touch opening.
Diagram shows L For microwave (built-in trim kit will be necessary).
Please state appliance model on order!

Air-drying wall unit for plates AO6080T L/R 60 329 355 383 431 490 548 573
1 door
2 chromium plated wire mesh inserts
1 removable drain tray

Diagram shows L

Air-drying wall unit for plates AO9080T 90 452 486 543 599 693 785 826
2 doors
2 chromium plated wire mesh inserts
1 removable drain tray

Price group
Corner wall units
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Please note planning instructions on page 60.02!

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Corner wall unit .
Planning depth 41.7 cm Door width 40 cm
Planning dimension 81.7 cm (78 - 94 cm) AOEE8080 L/R 80 408 443 489 539 644 749 795
Door width 50 cm
Planning dimension 91.7 cm (88 - 104 cm) AOEE9080 L/R 90 437 473 527 581 683 785 835
1 door
2 adjustable shelves
Diagram shows L 1 inner blender with angle blender AOPEEW880 8 0 0 0 0 0 0 0
adjustable from 4 to 10 cm
1.7 Actual space
Extra charge per 5 cm additional AMPTP5 5 11 14 14 17 21 24 35
Pl.depth

34 80/90 width (up to max. 20 cm)

7.7
Door width Attention: imperative to state the actual planning
measurement. The angle blender AOPEEW 8 .. is
adjusted at factory.

Corner wall unit AOE6080 L/R 60 433 466 498 546 641 735 787
rear length 60 x 60 cm
1 double hinged door
2 adjustable shelves

Do not plan protruding items such as extractors etc.

in the front elevation.

Diagram shows L

1/2022 67.01
 Price group
Corner wall units
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Please note planning instructions on page 60.02!

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Corner wall unit AOE6580 L/R 65 467 505 546 601 699 798 854
rear length 65 x 65 cm
1 double hinged door
2 adjustable shelves

Do not plan protruding items such as extractors etc.

in the front elevation.

Diagram shows L

Corner wall unit AOE6080T2 L/R 60 433 466 498 546 641 735 787
rear length 60 x 60 cm
2 doors with wide angle hinges
2 adjustable shelves

Style left/right determines the hinged side of the

less wide door, which must be opened first.
Do not plan protruding items such as extractors etc.
in the front elevation.

Corner wall unit AOE6580T2 L/R 65 467 505 546 601 699 798 854
rear length 65 x 65 cm
2 doors with wide angle hinges
2 adjustable shelves

Style left/right determines the hinged side of the

less wide door, which must be opened first.
Do not plan protruding items such as extractors etc.
in the front elevation.

Diagonal corner wall unit 135° AOED6080 L/R 60 505 546 564 617 698 779 830
1 door
2 corner blenders
2 adjustable shelves

Diagram shows L

Price group
Wall units for extractor
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit for extractor AOHS6080 L/R 60 386 415 442 484 547 609 632
1 door
up to 4 shelves, 8.5 cm deep
1 construction shelf
Cupboard division dependent on appliance.

Diagram shows L

Wall unit for extractor AOHS9080 90 547 592 648 713 805 896 931
2 doors
up to 4 shelves, 8.5 cm deep
1 construction shelf
Cupboard division dependent on appliance.

Necessary to state appliance.

Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)
When using a pull-out extractor, the carcase is 1.7 cm higher than the normal carcase and doors have touch opening resp. swing flap doors needs an electric
drive!

67.02 1/2022
 Price group
Wall units for extractor
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit for extractor AOHD6080 L/R 60 386 415 442 484 547 609 632
1 door
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender
1 shelf below according to appliance
Diagram shows L requirement

Wall unit for extractor AOHD9080 90 547 592 648 713 805 896 931
2 doors
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender in two parts
1 shelf below according to appliance
requirement

Wall unit with fold-up doors AOHDFK9080 90 821 852 896 933 1091 1139 1215
for extractor AOHDFK10080 100 851 892 934 975 1143 1193 1269
2 fold-up doors in programme style AOHDFK12080 120 911 973 1010 1061 1248 1303 1373
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender
1 shelf below according to appliance
requirement

Smaller appliances can also be positioned eccentrically.

The hose covering above the intermediate shelf can be individually positioned and adjusted on site.
Only intended for installation of ventilation components.
Necessary to state appliance.
Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)

Please allow at least 21.5 cm free space above the cupboard. By using the provided opening inhibitor, the measurement is reduced to 12 cm.
Electric drive mechanism see page 10.18.

Wall unit for extractor AOHD6080D L/R 60 406 434 470 537 622 709 760
1 door
1 fixed shelf

Necessary to state appliance.

Diagram shows L

Wall unit for extractor AOHD9080D 90 519 551 626 685 814 945 1007
2 doors AOHD12080D 120 676 714 830 889 1069 1254 1332
1 fixed shelf

Necessary to state appliance.

Wall unit with fold-up doors AOHDFK6080D 60 921 1000 1005 1113 1187 1270 1300
for extractor AOHDFK9080D 90 1000 1088 1091 1212 1293 1380 1413
2 fold-up doors in programme style AOHDFK12080D 120 1214 1308 1321 1423 1530 1647 1662
1 fixed shelf

Necessary to state appliance.

Permitted appliances:
Elica: BOXIN PLUS, GLASSOUT, FILO, INSIDE
Falmec: MOVE, VIRGOLA
Novy: FUSION PRO

Please allow at least 21.5 cm free space above the cupboard. By using the provided opening inhibitor, the measurement is reduced to 12 cm.
Electric drive mechanism see page 10.18.

1/2022 67.03
 Price group
Wall units with extractor ELICA
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit with extractor AOHD6080DE L/R 60 638 655 677 719 771 826 857
1 door
1 fixed shelf
1 extractor 34 cm deep

Appliance description see page 60.03.

Diagram shows L

Wall unit with extractor AOHD9080DE 90 748 767 814 850 931 1013 1052
2 doors AOHD12080DE 120 948 972 1044 1081 1193 1308 1357
1 fixed shelf
1 extractor 34 cm deep

Appliance description see page 60.03.

Wall unit with fold-up doors AOHDFK6080DE 60 959 1007 1010 1077 1124 1176 1194
and extractor AOHDFK9080DE 90 1047 1102 1104 1180 1229 1284 1305
2 fold-up doors in programme style AOHDFK12080DE 120 1283 1342 1350 1413 1481 1554 1562
1 fixed shelf
1 extractor 34 cm deep

Appliance description see page 60.03.

Recirculating set DEUMS 58

Set for on-site conversion
consisting of:
1 air circulation filter
1 recirculation pipe with ventilation grille

Please allow at least 21.5 cm free space above the cupboard. By using the provided opening inhibitor, the measurement is reduced to 12 cm.
Electric drive mechanism see page 10.18.

Price group
Wall units with fold-up doors
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit with fold-up doors AOFK6080 60 580 632 635 708 757 812 833
2 fold-up doors in programme style AOFK8080 80 663 721 725 808 864 926 950
2 adjustable shelves AOFK9080 90 700 765 768 857 918 983 1008
AOFK10080 100 777 843 850 933 1001 1076 1095
With 120 cm width with centre panel and AOFK12080 120 852 921 932 1007 1088 1174 1185
4 adjustable shelves.

Please allow at least 21.5 cm free space above the cupboard. By using the provided opening inhibitor, the measurement is reduced to 12 cm.
Electric drive mechanism see page 10.18.

Price group
Wall units with sliding doors
Carcase height 79.5 cm, carcase depth 34 cm
Neutral

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Wall unit with sliding doors AOSS12080T2 120 1497 1521 1559 1636 1773 1912 1922
consisting of: AOSS16080T2 160 1620 1646 1692 1780 1938 2096 2106
2 sliding doors on one front level AOSS18080T2 180 1712 1744 1796 1898 2076 2252 2261
1 carcase, left in half the planning width
1 carcase, right in half the planning width
2 adjustable shelves per carcase
1 fitting-set for on-site installation

Sliding doors in closed position on one level.

Guide-fitting on top shelf, top cupboard not possible.
Installation space above at least 3 cm.
The cupboard is supplied in separate modules.
Width alterations not possible!

67.04 1/2022
 Price group
Interior+ wall units
Carcase height 79.5 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Interior+ base wall unit AO5080I L/R 50 227 243 273 304 356 406 436
1 door AO6080I L/R 60 236 253 279 323 382 439 470
2 adjustable shelves (depth 15 cm)
additional Interior+ swing-out frame
essential
Diagram shows L

Interior+ swing-out frame For cupboard width 50 cm

1 swing-out frame with: IP5080 809
2 adjustable profile shelves For cupboard width 60 cm
6 railings IP6080 843

Interior+ base wall unit AO10080I 100 365 391 436 480 596 709 761
2 doors
2 adjustable shelves (depth 15 cm)
additional Interior+ swing-out frame
essential

Interior+ swing-out frame For cupboard width 100 cm

2 swing-out frames with each: IP10080 1593
2 adjustable profile shelves
6 railings

Possible accessories
precise description see page 90.34.

Interior+ shelf IP50B 50 155

IP60B 60 160

Interior+ railing IP50R 50 73

IP60R 60 74

Interior+ glass jar set IPGD3 72

IPGD4 94

Interior+ container IP1423C 67

IP1435C 67

Interior+ spice jar swing-out frame IPGR L/R 237

2 fixed profile shelves
height 37.9 cm, width 37.9 cm,
depth 9 cm
Cupboard prepared for on-site installation

Available for standard wall units from

Diagram shows L 50 cm width and from 53 cm height.
Turning position as hinged side of door.
For two-door cupboards, state hinged side
right or left.

Interior+ glass railing insert IPGRE 38

1 insert with glass railing
height 7.7 cm, width 34.8 cm

For use with Interior+ spice jar swing-out frame.

1/2022 67.05
 Surface style
Wall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 81.2 cm, shelf unit depth 36.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit, AO3R3082 10-30 307 333 413 503 528 552 621 552
thick 2.8 cm AO3R6082 30-60 438 463 591 751 789 827 941 819
back panel with circumferential shadow joint AO3R9082 60-90 569 592 768 998 1050 1102 1261 1086
and suspension fixing
2 shelves

Shelf unit interior colour = shelf unit exterior colour.

Widths in mm grid variably available.
Please state desired width.

Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 79.5 cm
Side depth 34 cm FS8034 L/R 34 0 0 62 87 121 153 79
Side depth 56 cm FS8056 L/R 56 0 0 102 147 207 258 135

Leading edge as carcase exterior side.

Diagram shows L

Visible carcase side .

for additional planning
for all wall units FSOL L/R 46 46 - - - - -

Leading edge as carcase exterior side.

Diagram shows L

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“ on page 10.07.

Price group
End panels
Width 5 cm

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7 Neutral

Wall unit end panel Carcase height 79.5 cm
Front finish Depth 36.2 cm
wall-bound solution (one-sided) AOW58036 L/R 5 232 242 260 296 336 374 403
Width 5 cm

Please state the relevant L/R.

Diagram shows L
The end panel width is always 5 cm.

67.06 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit blender Carcase height 79.5 cm
Front finish AOP2080 L/R 20 70 73 77 81 95 104 127

Front finish blenders are manufactured with a maximum

20 cm width.

Diagram shows L

Wall unit blender Carcase height 79.5 cm

with sides, shelf below and above AOPB2080 20 124 127 130 134 149 158 180
Bottom in carcase colour
Front finish

Front finish blenders are manufactured with a maximum

20 cm width.

Wall unit corner blender 90° Carcase height 79.5 cm

Front finish AOPE80 10 110 119 132 138 159 176 219
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
4 from l to r on order.
4

Wall unit corner blender 90° Carcase height 79.5 cm

with sides, shelf below and above AOPEB80 10 279 287 301 306 328 345 388
Bottom in carcase colour
Front finish
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Wall unit corner blender Carcase height 79.5 cm

Front finish AOPEW80 10 124 130 152 161 176 191 236
Freely selectable angle up to max. 270°
and freely selectable leg measurement from
2 x 2 cm up to 10 x 10 cm width

Flush with front.

2
Please state rear length (inside measurement)
from l to r on order.
2

Wall unit corner blender Carcase height 79.5 cm

with sides, shelf below and above AOPEWB80 10 301 307 329 339 354 369 414
Bottom in carcase colour
Front finish
Freely selectable angle up to max. 270°
and freely selectable leg measurement from
2 x 2 cm up to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

1/2022 67.07
 Surface style
Blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall unit blender Carcase height 79.5 cm
flush with carcase OSB2080 20 36 40 44 58 64 70 81 53

Price group
Original fronts

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Front part height 80.95 cm AFT020080 20 120 126 160 184 223 259 293
AFT030080 30 120 126 160 184 223 259 293
Please state intended purpose. AFT040080 40 124 130 166 192 234 276 311
AFT045080 45 128 134 169 195 238 281 316
AFT050080 50 131 138 175 207 249 296 340
AFT060080 60 138 152 183 218 271 320 360

67.08 1/2022
AVANCE
Wall units, carcase height 92.75 / 119.25 cm

Wall units - Carcase height 92.75 cm, carcase depth 34 cm 68. 01

Corner wall units - Carcase height 92.75 cm, carcase depth 34 cm 68. 01-02

Wall units for extractor - Carcase height 92.75 cm, carcase depth 34 cm 68. 02-03

Wall units with extractor ELICA - Carcase height 92.75 cm, carcase depth 34 cm 68. 03

Wall units with sliding doors - Carcase height 92.75 cm, carcase depth 34 cm 68. 04

Interior+ wall units - Carcase height 92.75 cm, carcase depth 34 cm 68. 04-05

Wall shelf units, thick 2.8 cm - Carcase height 94.45 cm, shelf unit depth 36.2 cm 68. 05

Wall units - Carcase height 119.25 cm, carcase depth 34 cm 68. 06

Wall units for extractor - Carcase height 119.25 cm, carcase depth 34 cm 68. 06-07

Wall units with extractor ELICA - Carcase height 119.25 cm, carcase depth 34 cm 68. 07

Wall shelf units, thick 2.8 cm - Carcase height 120.75 cm, shelf unit depth 36.2 cm 68. 07

Visible carcase sides - Wall units, carcase height 92.75 / 119.25 cm 68. 08

End panels - Width 5 cm 68. 08

Blenders - Wall units, carcase height 92.75 / 119.25 cm 68. 08-09

Blenders - Wall units, carcase height 92.75 / 119.25 cm 68. 09

Original fronts - Wall units, carcase height 92.75 / 119.25 cm 68. 10

92.75 / 119.25 cm
Wall units
AVANCE

68.

1/2022 68.
 AVANCE
Wall units, carcase height 92.75 / 119.25 cm
T: Cupboard depth cm
H: Cupboard height cm

Carcase height 93 cm Extractor units Sliding doors Carcase height 119 cm

68.01 T: 36 cm 68.02 T: 36 cm 68.04 T: 36 cm 68.06 T: 36 cm
AO 20 93 AOHS 60 93 AOSS 120 93 T2 AO 30 119
AO 30 93 AOSS 160 93 T2 AO 40 119
AO 40 93 AOSS 180 93 T2 AO 45 119
AO 45 93 AO 50 119
AO 50 93 AO 60 119
AO 60 93

68.01 T: 36 cm 68.02 T: 36 cm 68.06 T: 36 cm

AO 80 93 AOHS 90 93 AOM 50 119
AO 90 93 AOM 60 119
AO 100 93

Interior+

68.01 T: 36 cm 68.03 T: 36 cm 68.04 T: 36 cm

AOM 50 93 AOHD 60 93 AO 50 93 I
AOM 60 93 AO 60 93 I

Extractor units

68.03 T: 36 cm 68.04 T: 36 cm 68.06 T: 36 cm

AOHD 90 93 AO 100 93 I AOHS 60 119

Corner units

68.01 T: 36 cm 68.03 T: 36 cm 68.07 T: 36 cm

AOEE 80 93 AOHD 60 93 D AOHD 60 119
AOEE 90 93

Shelves

68.01 T: 36 cm 68.03 T: 36 cm 68.05 T: 36 cm 68.07 T: 36 cm

AOE 60 93 AOHD 90 93 D AO3R 30 95 AOHD 60 119 D
AOHD 120 93 D AO3R 60 95
AO3R 90 95

68.01 T: 36 cm 68.03 T: 36 cm 68.07 T: 36 cm

AOE 65 93 AOHD 60 93 DE AOHD 60 119 DE

68.02 T: 36 cm 68.03 T: 36 cm
AOE 60 93 T2 AOHD 90 93 DE
AOHD 120 93 DE

Shelves

68.02 T: 36 cm 68.07 T: 36 cm
AOE 65 93 T2 AO3R 30 121
AO3R 60 121

68.02 T: 36 cm
AOED 60 93
92.75 / 119.25 cm
Wall units
AVANCE

68.

68. 1/2022
 Price group
Wall units
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit AO2093 L/R 20 233 243 271 296 344 391 415
1 door AO3093 L/R 30 233 243 271 296 344 391 415
3 adjustable shelves AO4093 L/R 40 236 247 288 313 362 410 443
AO4593 L/R 45 237 251 292 317 368 419 449
AO5093 L/R 50 242 266 297 332 389 444 477
AO6093 L/R 60 253 276 302 349 410 472 511
Diagram shows L

Wall unit AO8093 80 361 385 440 482 577 670 720
2 doors AO9093 90 369 393 458 506 608 710 761
3 adjustable shelves AO10093 100 394 421 480 525 649 771 826

Wall unit microwave housing AOM5093 L/R 50 246 272 281 317 358 398 424
1 door AOM6093 L/R 60 263 280 300 338 387 436 467
1 adjustable shelf
1 appliance niche

Carcase 1.7 cm higher than the normal carcase!

Door with touch opening.
Diagram shows L For microwave (built-in trim kit will be necessary).
Please state appliance model on order!

Price group
Corner wall units
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Please note planning instructions on page 60.02!

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Corner wall unit .
Planning depth 41.7 cm Door width 40 cm
Planning dimension 81.7 cm (78 - 94 cm) AOEE8093 L/R 80 428 462 515 570 681 795 845
Door width 50 cm
Planning dimension 91.7 cm (88 - 104 cm) AOEE9093 L/R 90 456 495 557 615 726 837 890
1 door
3 adjustable shelves
Diagram shows L 1 inner blender with angle blender AOPEEW893 8 0 0 0 0 0 0 0
adjustable from 4 to 10 cm
1.7 Actual space
Extra charge per 5 cm additional AMPTP5 5 11 14 14 17 21 24 35
width (up to max. 20 cm)
Pl.depth

34 80/90

7.7
Door width Attention: imperative to state the actual planning
measurement. The angle blender AOPEEW 8 .. is
adjusted at factory.

Corner wall unit AOE6093 L/R 60 465 504 535 586 690 791 845
rear length 60 x 60 cm
1 double hinged door
3 adjustable shelves

Do not plan protruding items such as extractors etc.

in the front elevation.

Diagram shows L

Corner wall unit AOE6593 L/R 65 509 545 594 656 761 865 925
rear length 65 x 65 cm
1 double hinged door
3 adjustable shelves

Do not plan protruding items such as extractors etc.

in the front elevation.

Diagram shows L

1/2022 68.01
 Price group
Corner wall units
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Please note planning instructions on page 60.02!

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Corner wall unit AOE6093T2 L/R 60 465 504 535 586 690 791 845
rear length 60 x 60 cm
2 doors with wide angle hinges
3 adjustable shelves

Style left/right determines the hinged side of the

less wide door, which must be opened first.
Do not plan protruding items such as extractors etc.
in the front elevation.

Corner wall unit AOE6593T2 L/R 65 509 545 594 656 761 865 925
rear length 65 x 65 cm
2 doors with wide angle hinges
3 adjustable shelves

Style left/right determines the hinged side of the

less wide door, which must be opened first.
Do not plan protruding items such as extractors etc.
in the front elevation.

Diagonal corner wall unit 135° AOED6093 L/R 60 539 587 585 666 757 846 903
1 door
2 corner blenders
3 adjustable shelves

Diagram shows L

Price group
Wall units for extractor
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit for extractor AOHS6093 L/R 60 402 434 466 513 577 641 671
1 door
up to 5 shelves, 8.5 cm deep
1 construction shelf
Cupboard division dependent on appliance.

Diagram shows L

Wall unit for extractor AOHS9093 90 573 618 681 751 846 943 985
2 doors
up to 5 shelves, 8.5 cm deep
1 construction shelf
Cupboard division dependent on appliance.

Necessary to state appliance.

Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)
When using a pull-out extractor, the carcase is 1.7 cm higher than the normal carcase and doors have touch opening resp. swing flap doors needs an electric
drive!

68.02 1/2022
 Price group
Wall units for extractor
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit for extractor AOHD6093 L/R 60 402 434 466 513 577 641 671
1 door
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender
1 shelf below according to appliance
requirement
Diagram shows L

Wall unit for extractor AOHD9093 90 573 618 681 751 846 943 985
2 doors
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender in two parts
1 shelf below according to appliance
requirement

The hose covering above the intermediate shelf can be individually positioned and adjusted on site.
Only intended for installation of ventilation components.
Necessary to state appliance.
Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)

Wall unit for extractor AOHD6093D L/R 60 434 465 506 577 669 762 817
1 door
1 fixed shelf

Necessary to state appliance.

Diagram shows L

Wall unit for extractor AOHD9093D 90 553 586 674 736 876 1013 1083
2 doors AOHD12093D 120 720 755 894 956 1150 1345 1429
1 fixed shelf

Necessary to state appliance.

Permitted appliances:
Elica: BOXIN PLUS, GLASSOUT, FILO, INSIDE
Falmec: MOVE, VIRGOLA
Novy: FUSION PRO

Price group
Wall units with extractor ELICA
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit with extractor AOHD6093DE L/R 60 655 674 699 743 801 858 893
1 door
1 fixed shelf
1 extractor 34 cm deep

Appliance description see page 60.03.

Diagram shows L

Wall unit with extractor AOHD9093DE 90 768 790 844 883 970 1056 1099
2 doors AOHD12093DE 120 975 997 1084 1123 1244 1365 1418
1 fixed shelf
1 extractor 34 cm deep

Appliance description see page 60.03.

Recirculating set DEUMS 58

Set for on-site conversion
consisting of:
1 air circulation filter
1 recirculation pipe with ventilation grille

1/2022 68.03
 Price group
Wall units with sliding doors
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit with sliding doors AOSS12093T2 120 1527 1553 1601 1683 1838 1994 2005
consisting of: AOSS16093T2 160 1649 1679 1735 1830 2005 2179 2188
2 sliding doors on one front level AOSS18093T2 180 1743 1778 1841 1949 2143 2337 2347
1 carcase, left in half the planning width
1 carcase, right in half the planning width
3 adjustable shelves per carcase
1 fitting-set for on-site installation

Sliding doors in closed position on one level.

Guide-fitting on top shelf, top cupboard not possible.
Installation space above at least 3 cm.
The cupboard is supplied in separate modules.
Width alterations not possible!

Price group
Interior+ wall units
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Interior+ base wall unit AO5093I L/R 50 242 266 297 332 389 444 477
1 door AO6093I L/R 60 253 276 302 349 410 472 511
3 adjustable shelves (depth 15 cm)
additional Interior+ swing-out frame
essential

Diagram shows L

Interior+ swing-out frame For cupboard width 50 cm

1 swing-out frame with: IP5093 963
2 adjustable profile shelves For cupboard width 60 cm
6 railings IP6093 1007

Interior+ base wall unit AO10093I 100 394 421 480 525 649 771 826
2 doors
3 adjustable shelves (depth 15 cm)
additional Interior+ swing-out frame
essential

Interior+ swing-out frame For cupboard width 100 cm

2 swing-out frames with each: IP10093 1900
2 adjustable profile shelves
6 railings

Possible accessories
precise description see page 90.34.

Interior+ shelf IP50B 50 155

IP60B 60 160

Interior+ railing IP50R 50 73

IP60R 60 74

Interior+ glass jar set IPGD3 72

IPGD4 94

Interior+ container IP1423C 67

IP1435C 67

Interior+ spice jar swing-out frame IPGR L/R 237

2 fixed profile shelves
height 37.9 cm, width 37.9 cm,
depth 9 cm
Cupboard prepared for on-site installation

Available for standard wall units from

Diagram shows L 50 cm width and from 53 cm height.
Turning position as hinged side of door.
For two-door cupboards, state hinged side
right or left.

68.04 1/2022
 Price group
Interior+ wall units
Carcase height 92.75 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Interior+ glass railing insert IPGRE 38
1 insert with glass railing
height 7.7 cm, width 34.8 cm

For use with Interior+ spice jar swing-out frame.

Surface style
Wall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 94.45 cm, shelf unit depth 36.2 cm

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit, AO3R3095 10-30 326 350 434 571 600 628 710 631
thick 2.8 cm AO3R6095 30-60 453 480 629 802 845 887 1007 888
back panel with circumferential shadow joint AO3R9095 60-90 579 609 822 1032 1088 1144 1303 1143
and suspension fixing
3 shelves

Shelf unit interior colour = shelf unit exterior colour.

Widths in mm grid variably available.
Please state desired width.

1/2022 68.05
 Price group
Wall units
Carcase height 119.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit AO30119 L/R 30 320 347 377 429 467 509 572
1 door AO40119 L/R 40 351 362 386 439 492 545 599
3 adjustable shelves AO45119 L/R 45 353 368 392 458 524 592 627
AO50119 L/R 50 360 374 401 467 537 618 632
AO60119 L/R 60 377 397 428 503 567 630 709

Diagram shows L

Interior+ spice jar swing-out frame IPGR L/R 237

2 fixed profile shelves
height 37.9 cm, width 37.9 cm,
depth 9 cm
Cupboard prepared for on-site installation

Available for standard wall units from

Diagram shows L 50 cm width and from 53 cm height.
Turning position as hinged side of door.
For two-door cupboards, state hinged side
right or left.

Interior+ glass railing insert IPGRE 38

1 insert with glass railing
height 7.7 cm, width 34.8 cm

For use with Interior+ spice jar swing-out frame.

Wall unit microwave housing AOM50119 L/R 50 255 282 287 335 379 424 453
1 door AOM60119 L/R 60 276 291 312 357 410 464 500
2 adjustable shelves
1 appliance niche

Carcase 1.7 cm higher than the normal carcase!

Door with touch opening.
For microwave (built-in trim kit will be necessary).
Diagram shows L Please state appliance model on order!

Price group
Wall units for extractor
Carcase height 119.25 cm, carcase depth 34 cm
Neutral

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7

Wall unit for extractor AOHS60119 L/R 60 419 453 494 540 608 692 741
1 door
up to 5 shelves, 8.5 cm deep
1 construction shelf
Cupboard division dependent on appliance.

Diagram shows L

Necessary to state appliance.

Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)
When using a pull-out extractor, the carcase is 1.7 cm higher than the normal carcase and doors have touch opening resp. swing flap doors needs an electric
drive!

68.06 1/2022
 Price group
Wall units for extractor
Carcase height 119.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit for extractor AOHD60119 L/R 60 419 453 494 540 608 692 741
1 door
1 hose covering above intermediate shelf
1 fixed shelf
1 inner blender
1 shelf below according to appliance
requirement
Diagram shows L

The hose covering above the intermediate shelf can be individually positioned and adjusted on site.
Only intended for installation of ventilation components.
Necessary to state appliance.
Additional information:
- Control mode circulation/ducted out and the use of planned external motors
- Accessories such as lowering frame or installation kit (for installation in wider cupboards)

Wall unit for extractor AOHD60119D L/R 60 461 494 545 617 714 814 875
1 door
1 fixed shelf

Necessary to state appliance.

Diagram shows L

Permitted appliances:
Elica: BOXIN PLUS, GLASSOUT, FILO, INSIDE
Falmec: MOVE, VIRGOLA
Novy: FUSION PRO

Price group
Wall units with extractor ELICA
Carcase height 119.25 cm, carcase depth 34 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit with extractor AOHD60119DE L/R 60 671 692 724 768 829 891 929
1 door
1 fixed shelf
1 extractor 34 cm deep

Appliance description see page 60.03.

Diagram shows L

Recirculating set DEUMS 58

Set for on-site conversion
consisting of:
1 air circulation filter
1 recirculation pipe with ventilation grille

Surface style
Wall shelf units, thick 2.8 cm Descriptions / colours see surround accessories chapter 11.

Carcase height 120.75 cm, shelf unit depth 36.2 cm

Neutral

FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall shelf unit, AO3R30121 10-30 364 387 529 706 743 780 886 786
thick 2.8 cm AO3R60121 30-60 540 563 756 934 983 1031 1178 1040
back panel with circumferential shadow joint
and suspension fixing
3 shelves

Shelf unit interior colour = shelf unit exterior colour.

Widths in mm grid variably available.
Please state desired width.

1/2022 68.07
 Surface style
Visible carcase sides Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Depth KH KG VM ME FG MC H
Visible carcase side .
Carcase height 92.75 cm
Side depth 34 cm FS9334 L/R 34 0 0 69 97 136 171 88
Side depth 56 cm FS9356 L/R 56 0 0 114 165 232 289 151

Carcase height 119.25 cm

Diagram shows L Side depth 34 cm FS11934 L/R 34 0 0 79 116 174 217 114

Leading edge as carcase exterior side.

Visible carcase side .

for additional planning
for all wall units FSOL L/R 46 46 - - - - -

Leading edge as carcase exterior side.

Diagram shows L

Cost calculation of visible sides:

Visible sides in K, KH and KG style in the standard cupboard depth remain without charge.
The listed point values for visible sides are extra charge for the superior grade surface styles.
Visible sides mean exclusively the visible sides in a kitchen arrangement!
Please note the definition „visible sides / carcase exterior sides“ on page 10.07.

Price group
End panels
Width 5 cm

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit end panel Carcase height 92.75 cm
Front finish Depth 36.2 cm
wall-bound solution (one-sided) AOW59336 L/R 5 236 246 263 300 341 381 410
Width 5 cm
Carcase height 119.25 cm
Please state the relevant L/R. Depth 36.2 cm
Diagram shows L
The end panel width is always 5 cm. AOW511936 L/R 5 237 247 266 303 345 386 415

Price group
Blenders

Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7 Neutral

Wall unit blender Carcase height 92.75 cm

Front finish AOP2093 L/R 20 78 79 85 94 105 117 143

Front finish blenders are manufactured with a maximum Carcase height 119.25 cm
20 cm width. AOP20119 L/R 20 91 95 101 109 127 146 178

Diagram shows L

Wall unit blender Carcase height 92.75 cm

with sides, shelf below and above AOPB2093 20 131 132 138 148 159 170 195
Bottom in carcase colour
Front finish Carcase height 119.25 cm
AOPB20119 20 145 149 155 162 180 199 232
Front finish blenders are manufactured with a maximum
20 cm width.

68.08 1/2022
 Price group
Blenders

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Wall unit corner blender 90° Carcase height 92.75 cm
Front finish AOPE93 10 119 127 145 152 169 185 233
freely selectable leg measurement
from 4 x 4 cm to 10 x 10 cm width Carcase height 119.25 cm
AOPE119 10 126 129 149 159 180 204 251
Flush with front.
Please state rear length (inside measurement)
4 from l to r on order.
4

Wall unit corner blender 90° Carcase height 92.75 cm

with sides, shelf below and above AOPEB93 10 287 296 313 321 338 355 401
Bottom in carcase colour
Front finish Carcase height 119.25 cm
freely selectable leg measurement AOPEB119 10 295 298 317 328 349 372 421
from 4 x 4 cm to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

Wall unit corner blender Carcase height 92.75 cm

Front finish AOPEW93 10 131 138 165 174 189 207 253
Freely selectable angle up to max. 270°
and freely selectable leg measurement from Carcase height 119.25 cm
2 x 2 cm up to 10 x 10 cm width AOPEW119 10 140 143 166 176 199 222 273

Flush with front.

2
Please state rear length (inside measurement)
from l to r on order.
2

Wall unit corner blender Carcase height 92.75 cm

with sides, shelf below and above AOPEWB93 10 308 315 343 352 367 384 431
Bottom in carcase colour
Front finish Carcase height 119.25 cm
Freely selectable angle up to max. 270° AOPEWB119 10 317 320 344 354 375 399 450
and freely selectable leg measurement from
2 x 2 cm up to 10 x 10 cm width

Flush with front.

Please state rear length (inside measurement)
from l to r on order.

TFA .. Carcase-connection strip ANTFA 26

for use with filler with
front fixing bracket

Carcase connection strip for rear panels and original

fronts when used as blender with width of more
than 20 cm.

Surface style
Blenders Descriptions / colours see surround accessories chapter 11.
Neutral

FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME KM FG MC H
Wall unit blender Carcase height 92.75 cm
flush with carcase OSB2093 20 43 44 46 61 68 74 86 58

Carcase height 119.25 cm

OSB20119 20 49 54 58 76 83 90 104 71

1/2022 68.09
 Price group
Original fronts

Neutral
Type sketch Description/Planning Type Width A1 A2 A3 A4 A5 A6 A7
Front part height 94.2 cm AFT020093 20 135 145 180 212 244 280 314
AFT030093 30 135 145 180 212 244 280 314
Please state intended purpose. AFT040093 40 143 149 186 217 250 287 327
AFT045093 45 145 154 188 220 256 292 335
AFT050093 50 152 162 201 225 275 313 348
AFT060093 60 158 171 212 231 280 327 371

Front part height 120.7 cm AFT030119 30 140 149 180 212 268 306 331
AFT040119 40 151 158 191 221 286 321 346
Please state intended purpose. AFT045119 45 156 163 197 226 296 328 355
AFT050119 50 161 168 203 231 305 335 362
AFT060119 60 201 212 243 276 340 364 392

68.10 1/2022
Accessory surround

Units – Surround components 70. Chapter

Side panels / floors / Side panel tables 71. Chapter

Niche 72. Chapter

Wall claddings 73. Chapter

Accessory surround
7.

1/2022 7.
 Accessory surround
Accessory surround

7.

7. 1/2022
 Units - Surround
Units - Surround components

components
70.

Plinth covers 70. 01

Plinth covers - Fixed length 410 cm 70. 01

Plinth covers - Alterations / Accessories 70. 02

Slat appearance plinth blenders 70. 03

Plinth covers flush front 70. 03

Plinths flush with carcase 70. 04

Ceiling blenders 70. 05

Ceiling blenders flush with front 70. 06

Cornice 70. 07

Top shelves with cornice attached 70. 08

Top shelves - Processing / Accessories 70. 09

Light blenders 70. 10

1/2022 70.
 Units - Surround

70.
components

70.
1/2022
 Surface style
Plinth covers Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Length KH KG VM ME KM FG MC H VS
Plinth cover VSF120 120 - - - - - - - - 59
Heights from 7 up to 20 cm VSF130 130 - - 58 80 83 85 129 83 -
Fixed lengths depending on the VSF135 135 0 0 - - - - - - -
material types. VSF240 240 - - - - - - - - 98
VSF260 260 - - 96 134 139 143 215 137 -
Colours: K 286 and K 408 maximum length 260 cm VSF270 270 0 0 - - - - - - -

Plinth cover VSF180W 180 - - - - - - - - 87

waterproof VSF360W 360 - - - - - - - - 172
Heights from 7 up to 20 cm

Plinth cover VSFD90 90 0 0 72 99 110 120 153 85 92

diagonal
Heights from 7 up to 20 cm

Plinth cover VSFD90W 90 - - - - - - - - 80

waterproof, diagonal
Heights from 7 up to 20 cm

Plinth cover For cupboards up to depth 58 cm

side VSS58 52 0 0 21 39 51 63 78 39 21
Heights from 7 up to 20 cm For cupboards up to depth 112 cm
VSS112 104 0 0 37 55 64 73 92 44 35

Plinth cover For cupboards up to depth 58 cm

waterproof, side VSS58W 52 - - - - - - - - 42
Heights from 7 up to 20 cm For cupboards up to depth 112 cm
VSS112W 104 - - - - - - - - 56

Alteration of plinth height per metre

higher than 20 cm up to max. 50 cm plinth height charge per started 10 cm
Extra charge per 5 cm add height MPBS5 9 9 18 23 26 29 30 30 22

Additional plinth cover VSF120L 120 - - - - - - - - 70

Heights from 7 up to 20 cm VSF130L 130 - - 73 97 100 102 145 101 -
Fixed lengths depending on the VSF135L 135 25 25 - - - - - - -
material types. VSF240L 240 - - - - - - - - 116
VSF260L 260 - - 121 159 164 169 241 168 -
Colours: K 286 and K 408 maximum length 260 cm VSF270L 270 41 41 - - - - - - -

We supply a plinth cover, laminate version K, KH or KG, free of charge for all cupboards. For all plain laminate programmes or decor reproductions, as well as
for most lacquer colours, the plinths are usually available in the same colour. Plinths with a higher quality finish such as wood veneer or metallic lacquer are
available at extra charge. Their use is particularly recommended when visible sides in the same finish are ordered. If a free of charge plinth is also desired for
this, please state the colour. The carcase interior colour can possibly serve as a contrasting colour recommendation.

Please note: the point values shown are surcharge prices for higher quality finishes, therefore not individual plinth cover prices. Therefore the laminate styles
are marked 0 = no charge. For extra length plinth covers VSF 410, we always apply extra charge.

Surface style
Plinth covers Descriptions / colours see surround accessories chapter 11.

Fixed length 410 cm

Neutral

FS
Type sketch Description/Planning Type Length K KG FF ME FG
Plinth cover VSF410 410 61 100 200 256 270
Heights from 7 up to 20 cm
Fixed length 410 cm

K = Laminate KG = Laminate gloss all FF / FS / ME / FG colours

032 magnolia 138 fossil grey 032 magnolia 120 frosty white (except RAL-colours in FG)
100 arctic 273 platinum 100 arctic 136 sand grey
103 merino 282 alpine grey 103 merino
120 frosty white 284 carbon grey
130 mohair 286 black slate
134 olive grey 408 metallic
136 sand grey

1/2022 70.01
 Surface style
Plinth covers Descriptions / colours see surround accessories chapter 11.

Alterations / Accessories

Neutral
FF
K PF FS
Type sketch Description/Planning Type Length KH KG VM ME KM FG MC H VS
Plinth cover profile VSF135ADP 135 10
can be clipped onto 1.6 cm thick material VSF270ADP 270 12
KF = Plastic coloured
273 platinum 284 carbon grey

Please state colour.

Mitre profile for plinth connection MS 405 stainless steel colour

stainless steel colour or lacquered in F SGP10MS 19
for fitting on site SGP16MS 21
Aluminium profile cut to length SGP20MS 22
SGP 10 (height 7 to 12 cm)
SGP 16 (height 12.1 to 18 cm) lacquered in F
SGP 20 (height 18.1 to 22 cm) SGP10F 24
SGP16F 26
Not possible with VB and VSL! SGP20F 27
The lacquer colour is assigned at factory via the
colour of the plinth cover.

Longitudinal plinth connection VSVL 5

Plinth parts butt jointed
1 connection sheet
for fitting at the back

For connecting two VSF plinths on site.

Ventilator grille BLG 13

width 46 cm, height 6.5 cm
plastic
120 frosty white 225 light brown
132 ivory 405 stainless steel

For installation in plinth cover (VSF..) and

ceiling blenders (BDZ..) for electrical appliance ventilation.
Please state colour.

Folding step ladder SKLH60 144 151 156 190 198 206 222 185 189
Blender available in all plinth colour variations,
standing height 37.9 cm

Folded up in 60 cm wide floor and tall units

stored in plinth.
Cannot be used with:
- Less than 11 cm plinth height
- Cupboards with 66 cm carcase depth
37,9

- Housing units
- Cupboards with rear panel

Plinth platform per metre

chipboard substructure charge per started 10 cm
SOPOD 192
Must be covered with plinth.
min. 80 cm, max. 270 cm

Adjustable plinth leg

1 piece

For plinth height: 50 - 60 mm ZSFU50 2

64 - 89 mm ZSFU70 2
74 - 110 mm ZSFU80 2
79 - 104 mm ZSFU85 2
89 - 125 mm ZSFU100 2
99 - 135 mm ZSFU120 2
119 - 155 mm ZSFU130 2
139 - 175 mm ZSFU150 2
149 - 185 mm ZSFU160 2
169 - 205 mm ZSFU180 2
189 - 225 mm ZSFU200 2

70.02 1/2022
 Surface style
Slat appearance plinth blenders

Neutral
Type sketch Description/Planning Type Length MS
Slat appearance plinth blender per metre
Aluminium with stainless steel finish charge per started 10 cm
maximum length 300 cm Height 10.6 cm
maximum plinth height 20 cm VSL10A 79
Height 11.6 - 15.5 cm
Used between panels. VSL16A 131
Height 17.1 - 20.0 cm
VSL20A 147

Cutout for appliance ventilation per piece

Ventilation cutout 200 sq. cm AUSVSL 7

Minimum plinth height 10 cm!

Alteration of plinth height per metre

charge per started 10 cm
Extra charge for plinth height reduction. ANHVSL 7
Height on request.
Not all plinth heights are possible!

Material and colour styles

MS = Metal satin finish

405 stainless steel

Price group
Plinth covers flush front

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Length C1 C2 C3 C4 C5 C6 C7 C8
Plinth cover flush front per metre
Front finish charge per started 10 cm
Heights from 7 up to 20 cm VB 140 146 168 200 223 244 276 293
max. length see page 71.14
Texture direction as front Not available in BOSSA-C, IOS-C, IOS-M-C, VALAIS-C

Only possible underneath tall units!

No grain texture imaging with front.

Mitre for connection per piece

to VBS ANVBGE L/R 15

Plinth cover flush with side per piece

Front finish VBS L/R 97 99 114 130 143 157 175 185
with mitre
Not available in BOSSA-C, IOS-C, IOS-M-C, SOLID-C, VALAIS-C
Heights from 7 up to 20 cm
depth 58 cm

For end cupboard with angled door.

Extra charge for height increase per metre

per 5 cm add height charge per started 10 cm
max. height 50 cm MPHB5 9 9 19 24 33 34 35 36

Ventilator grille
Width 57 cm, height 6 cm
aluminium stainless steel coloured BLGVA 26

FS = Colour lacquered super matt BLGVFS 39

032 magnolia 139 lava
100 arctic 273 platinum
103 merino 277 black
120 frosty white 279 midnight blue
130 mohair 282 alpine grey
134 olive grey 284 carbon grey
136 sand grey 285 basalt grey
137 taupe grey 286 black slate
138 fossil grey RAL RAL/NCS-colours

1/2022 70.03
 Surface style
Plinths flush with carcase Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type Length KH KG VM ME KM FG MC H VS
Plinth flush with carcase VSFKB120 120 - - - - - - - - 59
Heights from 7 up to 20 cm VSFKB130 130 - - 58 80 83 85 129 83 -
Delivery lengths according to VSFKB135 135 0 0 - - - - - - -
the material types VSFKB240 240 - - - - - - - - 98
VSFKB260 260 - - 96 134 139 143 215 137 -
Always in combination with front extensions VSFKB270 270 0 0 - - - - - - -
AN TU 85.
Colours: K 286 and K 408 maximum length 260 cm

Plinth flush with carcase, VSFKB180W 180 - - - - - - - - 87

waterproof VSFKB360W 360 - - - - - - - - 172
Heights from 7 up to 20 cm

Always in combination with front extensions

AN TU 85.

Plinth flush with carcase VSFKBGU 60 17 17 53 63 66 69 96 69 55

Heights from 7 up to 20 cm
for use below housing units

Always in combination with front extensions

AN TU 85.
Per housing unit this type is essential once.

Plinth flush with carcase, VSFKBGUW 60 - - - - - - - - 59

waterproof
Heights from 7 up to 20 cm
for use below housing units

Always in combination with front extensions

AN TU 85.
Per housing unit this type is essential once.

Plinth flush with carcase, VSSKB60 60 0 0 21 39 51 63 78 39 21

lateral VSSKB130 130 0 0 37 55 64 73 92 44 35
Heights from 7 up to 20 cm

Always in combination with front extensions

AN TU 85.

Plinth flush with carcase, VSSKB60W 60 - - - - - - - - 42

waterproof, lateral VSSKB130W 130 - - - - - - - - 56
Heights from 7 up to 20 cm

Always in combination with front extensions

AN TU 85.

70.04 1/2022
 Surface style
Ceiling blenders Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type KH KG VM ME KM FG MC H
Front ceiling blender per metre
charge per started 10 cm
Set back 1 cm from carcase. up to 10 cm high
Max. length 250 cm. BDZ10 43 48 58 74 88 101 119 69
BLG.. necessary above fridge.
up to 20 cm high
BDZ20 55 58 86 109 129 148 176 106
Diagram shows R

Extra charge per metre

per 5 cm add height charge per started 10 cm
MPBD5 9 9 18 23 26 29 30 30

BDZ 10 .., BDZ 20 ..

Side ceiling blender up to 10 cm high

36 or 58 cm deep BDS1036 37 39 42 52 62 71 83 48
BDS1058 40 41 43 56 66 76 89 50
Set back 0.2 cm from carcase.
Length adaptation on site. up to 20 cm high
BDS2036 38 41 43 56 66 76 89 57
BDS2058 43 44 50 66 78 89 104 63

Extra charge per metre

per 5 cm add height charge per started 10 cm
MPBD5 9 9 18 23 26 29 30 30

56

BDS 10 58 ..

34

BDS 10 36 ..

1/2022 70.05
 Price group
Ceiling blenders flush with front

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type C1 C2 C3 C4 C5 C6 C7 C8
Ceiling blender flush with front per metre
Front finish charge per started 10 cm
Heights from 10 up to 20 cm DB 124 127 153 180 208 232 260 278
max. height 20 cm
max. length see page 71.14 Not available in BOSSA-C, IOS-C, IOS-M-C, VALAIS-C
Texture direction as front

Straight ceiling blender for use

between panels.
No grain texture imaging with front.

Mitre for connection per piece

to DBS ANDBGE L/R 15

Ceiling blender flush with side per piece

Front finish DBS L/R 83 87 101 120 133 149 166 177
with mitre
Not available in BOSSA-C, IOS-C, IOS-M-C, SOLID-C, VALAIS-C
Heights from 10 up to 20 cm
max. height 20 cm
depth 58 cm

For end cupboard with angled door.

Extra charge for height increase per metre

per 5 cm add height charge per started 10 cm
max. height 50 cm MPHB5 9 9 19 24 33 34 35 36

Ventilator grille
Width 57 cm, height 6 cm
aluminium stainless steel coloured BLGVA 26

FS = Colour lacquered super matt BLGVFS 39

032 magnolia 139 lava
100 arctic 273 platinum
103 merino 277 black
120 frosty white 279 midnight blue
130 mohair 282 alpine grey
134 olive grey 284 carbon grey
136 sand grey 285 basalt grey
137 taupe grey 286 black slate
138 fossil grey RAL RAL/NCS-colours

70.06 1/2022
Side panels / Floors / Side panel tables

Side panels / Floors /

Side panel tables
Side panels / bases / side panel tables - Planning tips 71. 01-02

Side panels W1.. in variable sizes 71. 03

Shelves B1.. - for finishing tops, top and bottom and shelves 71. 03

Side panels W2.. in variable sizes 71. 04

71.
Shelves B2.. - for finishing tops, top and bottom and shelves 71. 04

Bottom shelves - Thickness 1.6 cm 71. 04

Side panels W3.. in variable sizes 71. 05

Shelves B3.. - for finishing tops, top and bottom and shelves 71. 06

Table tops B3T.. 71. 06

Side panels W4.. in variable sizes 71. 07

Shelves B4.. - for finishing tops, top and bottom and shelves 71. 08

Table tops B4T.. 71. 08

Side panels W6.. in variable sizes 71. 09

Shelves B6.. - for finishing tops, top and bottom and shelves 71. 10

Table tops B6T.. 71. 10

Processing / Accessories - for finishing tops, top and bottom and shelves 71. 11-12

Side panels in front finish 71. 13

Front panel material 71. 14

Side panel material STMAT/STMAT2 71. 15-19

Glass side panels - Thickness 0.7 cm 71. 20

Side panel tables - Thickness 2.8 cm 71. 21

Side panel tables - Thickness 4 cm 71. 22

Side panel tables - Thickness 6 cm 71. 23

1/2022 71.
 Side panels / Floors /

71.
Side panel tables

71.
1/2022
Side panels and Shelves
Planning tips

10

14 9
8 13 13

2 12
1

11
15
16
7
5

W2/3/6

6 1
3

0,6 cm
1,7 cm

Side Panels, finishing tops, bottom and tops, shelves and table Shelves
tops, finished on both sides, visible edge surround. B1, B2, B3, B4 and B6 Shelves can be used in various situ-
ations.
Side panels
1 Side panel in variable dimensions W1, W2, W3, W4, 8 Top shelves can be used as covering above tall units or
W6, WF tall shelf units as the view from above always matches
The height dimension of the side panel (ordering dimen- the carcase colour. It is therefore recommended to cover
sion) = cupboard height plus plinth height. directly visible surfaces with a top shelf.
For height adjustment floor profile. Do not use self-supporting B1 shelves.

2 Side panel in variable dimensions W1, W2, W3, W4, 9 Top shelves can be planned to arrange the lines of wall
W6, WF and tall units. Top shelves, placed on cupboards, connect
cupboard and wall areas, or are placed in interposed posi-
3 Side panel in variable dimensions W3, W4, W6 tion. B1 shelves must be planned lying on top only.
Side panel tables are possible from 2,8 cm thickness.
Plan connection to table top SV… 10 Bottom shelves are for arranging the lower lines of wall
units because their underside is always in carcase colour. It
4 Side panel floor sealing profile WBAP is therefore recommended to use a top shelf for covering
For height adjustment and possibly additional floor fixing directly visible surfaces. The door joint is realised with spa-
of free standing side panels. Length to be reduced on site. cer strips (included in delivery).

Alternative side panel floor fixings WB3, WB4, WB6 with 11 BEAH suspension arrangement
additional tilt protection when planned free standing. Plan additionally for self-supporting top shelves.

Side panel tables Shelves with shelf holder

5 Table top B3T, B4T, B6T 12 Shelves B3FH…, B4FH…, B6FH…
Shelf depth maximum 36,5 cm.
6 Cross bar TRA3, TRA4, TRA6 An additional side fixing or support is necessary with a
Essential for stabilising of table solutions. Connection to depth of 36 cm e.g. BVF.
table top and side panel with eccentric fittings.
Support for shelves and bottom shelves
7 Tongue and groove connection BVF3, BVF4, BVF6 13 Plan shelf support FBH 3, FBH 4 or FBH 6 for additional,
Concealed fixing to the wall or other elements. concealed wall fixing of self-supporting bottom shelves
fixing of self-supporting bottom shelves.

1/2022 71.01
Side panels and Shelves
Planning tips

Lighting for top shelves Lighting for bottom shelves and self-supporting areas
14 Light drill holes for BO 78 for lights LER of finishing shelves
Almost flush with surface light installation. The light pro- Light cutouts have a concealed cable channel towards the rear
trudes from the shelf by 2 mm. Light positioning in the edge in the self-supporting shelf area.
area of door opening in corner layouts is possible.
15 Light drill holes BO 78 for built-in lights LER

16 Built-in lights BLE ... incl. cutout

Lighting incl. accessories see chapter 91.

Overhang at the carcase edge a) Wall-bound b) Free standing

1,8 - 2,1 cm
The illustrations show standard meas- Front thickness 0,2 cm 0,2 cm
overhang
rear wall1,6 cm overhang
urements. Additional 2 mm with Tip- front 0,2 cm 0,2 cm
1,6 cm
overall carcase depth 0,2 cm
Softclose and SensoMatic will be taken
0,2 cm

into consideration free of charge by our

overall carcase depth

cm
(66 cm)
side panel

order processing dept.

66 cm

0,2 cm 1,6 cm
67,7
cmcm
(56 cm)

side panel
66 cm

side panel
57,7

0,2 cm
56
56 cm

34 cm
0,2 cm

0,2 cm

0,2 cm
34 cm
0,2 cm

0,2 cm

0,2 cm
66 cm

0,2 cm 0,2 cm 0,2 cm

56 cm

front overhang
1,8 - 2,1 cm 0,2 cm 0,2 cm 0,2 cm
34 cm

Front thickness front overhang front overhang

0,2 cm

0,2 cm

0,2 cm
1,8 - 2,1 cm
Front thickness
0,2 cm
0,2 cm 0,2 cm
0,2 cm

Overhang at the side Side overhang for side panels, visible side, etc. 0,2 cm

0,2 cm

Edge types K / KH / KG / KM and L have thick edges.

for side panels and shelves

71.02 1/2022
 Surface style
Side panels W1.. in variable sizes Descriptions / colours see surround accessories chapter 11.

Neutral
FS
Type sketch Description/Planning Type Depth FF ME FG
Side panel W1.. per metre
thickness 1.2 cm charge per started 10 cm
maximum height 255 cm up to
both sides finished W110 L/R 10 96 125 148
visible edge allround W136 L/R 36,5 135 175 228
W148 L/R 48,5 165 216 272
W1.. side panels always require a W158 L/R 60 195 257 317
cupboard side for fixing! W168 L/R 70 226 298 362
Please state height and depth on order! W180 L/R 80 257 339 406
Indicate L/R for visible side. W190 L/R 90 288 380 450
If required, plan side panel floor W1100 L/R 100 318 422 495
connecting profile WBAP1 120. W1120 L/R 120 349 463 539

Side panel floor connecting profile stainless steel colour

1,7 cm

stainless steel colour or lacquered in F WBAP1120 0

0,6 cm

Length 120 cm
1 end cap glued on lacquered in F
1 end cap loose WBAPF1120 31

Length adaptation on site.

The lacquer colour is assigned at factory via the
colour of the side panel.

Length connection per top part

tongue and groove joint VL 23
without pop-up fitting

Recess for side panel WAUKS 92

90° recess for plinth recess
with colour matching edge

Please state height and depth of the recess.

For islands please plan type 2x.
Not possible in combination with side panels
in front finish WF .. .

Surface style
Shelves B1.. Descriptions / colours see surround accessories chapter 11.

for finishing tops, top and bottom and shelves

Neutral
FS
Type sketch Description/Planning Type Depth FF ME FG
Shelf B1.. per metre
thickness 1.2 cm charge per started 10 cm
max. length 260 cm up to
both sides finished B110 10 96 125 148
visible edge allround B125 25 116 150 188
B136 36,5 135 175 228
Please state length and depth on order! B148 48,5 165 216 272
B158 60 195 257 317
B168 70 226 298 362
B180 80 257 339 406
B190 90 288 380 450
B1100 100 318 422 495
B1120 120 349 463 539

1/2022 71.03
 Surface style
Side panels W2.. in variable sizes Descriptions / colours see surround accessories chapter 11.

Worktop decors
AL

Neutral
FF FB
K PF FS MC
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MF H L
Side panel W2.. per metre
Thickness 1.6 cm charge per started 10 cm
maximum height 255 cm up to
both sides finished W210 L/R 10 37 37 96 125 140 148 170 130 87
visible edge allround W236 L/R 36,5 74 74 135 175 193 228 261 202 145
W248 L/R 48,5 82 82 165 216 239 272 312 244 169
Please state height and depth on order! W258 L/R 60 90 90 195 257 284 317 363 285 193
Indicate L/R for visible side. W268 L/R 70 100 100 226 298 330 362 413 328 218
If required, plan side panel floor W280 L/R 80 108 108 257 339 375 406 464 369 242
connecting profile WBAP2 120. W290 L/R 90 116 116 288 380 421 450 515 411 266
W2100 L/R 100 124 124 318 422 466 495 566 452 291
W2120 L/R 120 134 134 349 463 511 539 616 494 315

Side panel floor connecting profile stainless steel colour

1,7 cm

stainless steel colour or lacquered in F WBAP2120 0

0,6 cm

Length 120 cm
1 end cap glued on lacquered in F
1 end cap loose WBAPF2120 31

Length adaptation on site.

The lacquer colour is assigned at factory via the
colour of the side panel.

Length connection per top part

tongue and groove joint VL 23
without pop-up fitting

Recess for side panel WAUKS 92

90° recess for plinth recess
with colour matching edge

Please state height and depth of the recess.

For islands please plan type 2x.
Not possible in combination with side panels
in front finish WF .. .

Surface style
Shelves B2.. Descriptions / colours see surround accessories chapter 11.

for finishing tops, top and bottom and shelves

Worktop decors
AL

Neutral
FF FB
K PF FS MC
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MF H L
Shelf B2.. per metre
Thickness 1.6 cm charge per started 10 cm
maximum length 260 cm up to
(style KG 270 cm, B210 10 37 37 96 125 140 148 170 130 87
style L 405 cm) B225 25 55 55 116 150 187 188 216 167 116
both sides finished B236 36,5 74 74 135 175 193 228 261 202 145
visible edge allround B248 48,5 82 82 165 216 239 272 312 244 169
B258 60 90 90 195 257 284 317 363 285 193
Please state length and depth on order! B268 70 100 100 226 298 330 362 413 328 218
B280 80 108 108 257 339 375 406 464 369 242
B290 90 116 116 288 380 421 450 515 411 266
B2100 100 124 124 318 422 466 495 566 452 291
B2120 120 134 134 349 463 511 539 616 494 315

Surface style
Bottom shelves Descriptions / colours see surround accessories chapter 11.

Thickness 1.6 cm
Neutral

FF
K PF FS
Type sketch Description/Planning Type KH KG VM ME FG MC H
Bottom shelf per metre
Thickness 1.6 cm charge per started 10 cm
Front edge chamfered UBS 98 98 148 203 213 246 201
depth 33.9 cm

71.04 1/2022
 Surface style
Side panels W3.. in variable sizes Descriptions / colours see surround accessories chapter 11.

Worktop decors
AL

Neutral
FF FB
K PF FS MC
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MF H L
Side panel W3.. per metre
thickness 2.8 cm charge per started 10 cm
maximum height 255 cm up to
both sides finished W310 L/R 10 39 39 112 148 163 185 213 156 98
visible edge allround W336 L/R 36,5 78 78 157 205 228 284 328 238 165
W348 L/R 48,5 86 86 193 253 281 339 391 284 191
Please state height and depth on order! W358 L/R 60 96 96 229 300 334 394 454 331 218
Indicate L/R for visible side. W368 L/R 70 104 104 265 348 387 449 518 376 244
If required, plan side panel floor W380 L/R 80 112 112 301 395 440 504 581 423 270
connecting profile WBAP3 120. W390 L/R 90 120 120 337 443 493 559 645 470 297
W3100 L/R 100 129 129 373 490 545 614 708 517 324
W3120 L/R 120 138 138 409 538 598 669 771 563 350

Side panel floor connecting profile stainless steel colour

1,7 cm

stainless steel colour or lacquered in F WBAP3120 0

0,6 cm

Length 120 cm
1 end cap glued on lacquered in F
1 end cap loose WBAPF3120 31

Length adaptation on site.

The lacquer colour is assigned at factory via the
colour of the side panel.

Side panel height adjustment WH3 37

2 round legs

Adjustment + 2 cm

Side panel floor fixing WB3 42

tongue and groove connection

With tipping safety for free standing planning

through bolting to side on site.

Length connection per top part

tongue and groove joint VL 23
without pop-up fitting

Recess for side panel WAUKS 92

90° recess for plinth recess
with colour matching edge

Please state height and depth of the recess.

For islands please plan type 2x.
Not possible in combination with side panels
in front finish WF .. .

These components are not combinable with each other!

1/2022 71.05
 Surface style
Shelves B3.. Descriptions / colours see surround accessories chapter 11.

for finishing tops, top and bottom and shelves

Worktop decors
AL

Neutral
FF FB
K PF FS MC
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MF H L
Shelf B3.. per metre
thickness 2.8 cm, charge per started 10 cm
maximum length 260 cm up to
(style KG 270 cm, B310 10 39 39 112 148 163 185 213 156 98
style L 405 cm) B325 25 59 59 136 177 215 235 270 169 129
both sides finished B336 36,5 78 78 157 205 228 284 328 238 165
visible edge allround B348 48,5 86 86 193 253 281 339 391 284 191
B358 60 96 96 229 300 334 394 454 331 218
Please state length and depth on order! B368 70 104 104 265 348 387 449 518 376 244
B380 80 112 112 301 395 440 504 581 423 270
B390 90 120 120 337 443 493 559 645 470 297
B3100 100 129 129 373 490 545 614 708 517 324
B3120 120 138 138 409 538 598 669 771 563 350

Shelf B3F.. with support per metre

thickness 2.8 cm, charge per started 10 cm
maximum length 260 cm up to
(style KG 270 cm, B3FH25 25 136 136 213 254 309 312 347 252 206
style L 280 cm) B3FH36 36,5 155 155 234 282 314 361 405 321 242
Minimum depth 15 cm
both sides finished
three-sided visible edge
with shelf support FBH3

Shelf width
30 to 50 cm = 2 pieces
51 to 100 cm = 3 pieces
101 to 160 cm = 4 pieces
161 to 280 cm = 5 pieces

Please state length and depth on order!

Essential to plan a side fixing or support
for depth of 36 cm.

Surface style
Table tops B3T.. Descriptions / colours see surround accessories chapter 11.

Worktop decors
AL

Neutral
FF FB
K PF FS MC
Type sketch Description/Planning Type KH KG VM ME KM FG MF H L
Table top B3T.. per metre
thickness 2.8 cm, charge per started 10 cm
maximum length 260 cm up to
(style KG 270 cm, B3T25 25 59 59 136 177 215 235 270 169 129
style L 405 cm) B3T36 36,5 78 78 157 205 228 284 328 238 165
both sides finished B3T48 48,5 86 86 193 253 281 339 391 284 191
visible edge allround B3T58 60 96 96 229 300 334 394 454 331 218
B3T68 70 104 104 265 348 387 449 518 376 244
Please state length and depth on order! B3T80 80 112 112 301 395 440 504 581 423 270
B3T ... not possible in VM! B3T90 90 120 120 337 443 493 559 645 470 297
B3T100 100 129 129 373 490 545 614 708 517 324
B3T120 120 138 138 409 538 598 669 771 563 350

Cross beam per metre

thickness 2.8 cm, height 20 cm charge per started 10 cm
with connections TRA3 71 71 148 187 206 235 268 185 138

For table top solutions, cross beams

are necessary for table tops and side
panels!

Butt connection per top part

with connection fixings SV3 L/R 40

For connecting table top

to side panel W3.. .
Total price = 2x SV3

Batten per metre

3 x 3 cm charge per started 10 cm
incl. fixing material AL33 21
max. length 300 cm

Please state required length on order.

71.06 1/2022
 Surface style
Side panels W4.. in variable sizes Descriptions / colours see surround accessories chapter 11.

Worktop decors

Neutral
Type sketch Description/Planning Type Depth KM L
Side panel W4.. per metre
thickness 4 cm, charge per started 10 cm
maximum height 255 cm up to
both sides finished W410 L/R 10 150 100
visible edge allround W436 L/R 36,5 232 168
W448 L/R 48,5 267 195
Please state height and depth on order! W458 L/R 60 317 223
Indicate L/R for visible side. W468 L/R 70 347 251
If required, plan side panel floor W480 L/R 80 381 278
connecting profile WBAP4 120. W490 L/R 90 467 305
W4100 L/R 100 497 333
W4120 L/R 120 557 360

Side panel floor connecting profile stainless steel colour

1,7 cm

stainless steel colour or lacquered in F WBAP4120 0

0,6 cm

Length 120 cm
2 end caps loose lacquered in F
WBAPF4120 31
Length adaptation on site.
The lacquer colour is assigned at factory via the
colour of the side panel.

Side panel height adjustment WH4 47

2 round legs

Adjustment + 2 cm

Side panel floor fixing WB4 63

tongue and groove connection

With tipping safety for free standing planning

through bolting to side on site.

Length connection per top part

tongue and groove joint VL 23
without pop-up fitting

Recess for side panel WAUKS 92

90° recess for plinth recess
with colour matching edge

Please state height and depth of the recess.

For islands please plan type 2x.
Not possible in combination with side panels
in front finish WF .. .

These components are not combinable with each other!

1/2022 71.07
 Surface style
Shelves B4.. Descriptions / colours see surround accessories chapter 11.

for finishing tops, top and bottom and shelves

Worktop decors

Neutral
Type sketch Description/Planning Type Depth KM L
Shelf B4.. per metre
thickness 4 cm, charge per started 10 cm
maximum length 405 cm up to
both sides finished B410 10 150 100
visible edge allround B425 25 197 131
B436 36,5 232 168
Please state length and depth on order! B448 48,5 267 195
B458 60 317 223
B468 70 347 251
B480 80 381 278
B490 90 467 305
B4100 100 497 333
B4120 120 557 360

Shelf B4F.. with support per metre

thickness 4 cm, charge per started 10 cm
max. length 280 cm up to
Minimum depth 25 cm B4FH25 25 392 261
both sides finished B4FH36 36,5 412 298
three-sided visible edge
with shelf support FBH4

Shelf width
70 to 140 cm = 2 pieces
141 to 210 cm = 3 pieces
211 to 280 cm = 4 pieces

Please state length and depth on order!

Essential to plan a side fixing or support
for depth of 36 cm.

Surface style
Table tops B4T.. Descriptions / colours see surround accessories chapter 11.
Worktop decors

Neutral
Type sketch Description/Planning Type KM L
Table top B4T.. per metre
thickness 4 cm, charge per started 10 cm
maximum length 405 cm up to
both sides finished B4T25 25 197 131
visible edge allround B4T36 36,5 232 168
B4T48 48,5 267 195
Please state length and depth on order! B4T58 60 317 223
B4T68 70 347 251
B4T80 80 381 278
B4T90 90 467 305
B4T100 100 497 333
B4T120 120 557 360

Cross beam per metre

thickness 4 cm, height 20 cm charge per started 10 cm
with connections TRA4 233 140

For table top solutions, cross beams

are necessary for table tops and side
panels!

Butt connection SV4 L/R 62

with connection fixings

For connecting table top

to side panel W4.. .
Total price = 2x SV4

Batten per metre

3 x 3 cm charge per started 10 cm
incl. fixing material AL33 21
max. length 300 cm

Please state required length on order.

71.08 1/2022
 Surface style
Side panels W6.. in variable sizes Descriptions / colours see surround accessories chapter 11.

Worktop decors

Neutral
FF FB
K PF FS MC
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MF H L
Side panel W6.. per metre
thickness 6 cm charge per started 10 cm
maximum height 255 cm up to
both sides finished W610 L/R 10 89 89 177 238 249 254 265 207 103
visible edge allround W636 L/R 36,5 137 137 235 287 331 336 354 275 173
W648 L/R 48,5 158 158 295 358 413 421 443 342 201
Please state height and depth on order! W658 L/R 60 181 181 353 430 496 505 532 411 229
Indicate L/R for visible side. W668 L/R 70 203 203 412 502 578 589 620 478 258
If required, plan side panel floor W680 L/R 80 225 225 471 574 660 675 709 545 287
connecting profile WBAP6 120. W690 L/R 90 248 248 531 646 743 759 798 613 315
W6100 L/R 100 269 269 589 718 826 843 886 683 343
W6120 L/R 120 292 292 649 790 908 927 976 749 372

Side panel floor connecting profile stainless steel colour

1,7 cm

stainless steel colour or lacquered in F WBAP6120 0

0,6 cm

Length 120 cm
1 end cap glued on lacquered in F
1 end cap loose WBAPF6120 31

Length adaptation on site.

The lacquer colour is assigned at factory via the
colour of the side panel.

Side panel height adjustment WH6 63

2 round legs

Adjustment + 2 cm

Side panel floor fixing WB6 63

tongue and groove connection

With tipping safety for free standing planning

through bolting to side on site.

Length connection per top part

tongue and groove joint VL 23
without pop-up fitting

Recess for side panel WAUKS 92

90° recess for plinth recess
with colour matching edge

Please state height and depth of the recess.

For islands please plan type 2x.
Not possible in combination with side panels
in front finish WF .. .

These components are not combinable with each other!

1/2022 71.09
 Surface style
Shelves B6.. Descriptions / colours see surround accessories chapter 11.

for finishing tops, top and bottom and shelves

Worktop decors

Neutral
FF FB
K PF FS MC
Type sketch Description/Planning Type Depth KH KG VM ME KM FG MF H L
Shelf B6.. per metre
thickness 6 cm charge per started 10 cm
maximum length 260 cm up to
(style KG 270 cm, B610 10 89 89 177 238 249 254 265 207 103
style L 405 cm) B625 25 113 113 206 262 290 295 309 240 138
both sides finished B636 36,5 137 137 235 287 331 336 354 275 173
visible edge allround B648 48,5 158 158 295 358 413 421 443 342 201
B658 60 181 181 353 430 496 505 532 411 229
Please state length and depth on order! B668 70 203 203 412 502 578 589 620 478 258
B680 80 225 225 471 574 660 675 709 545 287
B690 90 248 248 531 646 743 759 798 613 315
B6100 100 269 269 589 718 826 843 886 683 343
B6120 120 292 292 649 790 908 927 976 749 372

Shelf B6F.. with support per metre

thickness 6 cm charge per started 10 cm
maximum length 260 cm up to
(style KG 270 cm, B6FH25 25 243 243 336 392 414 425 439 381 268
style L 280 cm) B6FH36 36,5 267 267 365 417 452 466 484 415 303
Minimum depth 25 cm
both sides finished
three-sided visible edge
with shelf support FBH6

Shelf width
70 to 140 cm = 2 pieces
141 to 210 cm = 3 pieces
211 to 280 cm = 4 pieces

Please state length and depth on order!

Essential to plan a side fixing or support
for depth of 36 cm.

Surface style
Table tops B6T.. Descriptions / colours see surround accessories chapter 11.

Worktop decors

Neutral
FF FB
K PF FS MC
Type sketch Description/Planning Type KH KG VM ME KM FG MF H L
Table top B6T.. per metre
thickness 6 cm charge per started 10 cm
maximum length 260 cm up to
(style KG 270 cm, B6T25 25 113 113 206 262 290 295 309 240 138
style L 405 cm) B6T36 36,5 137 137 235 287 331 336 354 275 173
both sides finished B6T48 48,5 158 158 295 358 413 421 443 342 201
visible edge allround B6T58 60 181 181 353 430 496 505 532 411 229
B6T68 70 203 203 412 502 578 589 620 478 258
Please state length and depth on order! B6T80 80 225 225 471 574 660 675 709 545 287
B6T ... not possible in VM! B6T90 90 248 248 531 646 743 759 798 613 315
B6T100 100 269 269 589 718 826 843 886 683 343
B6T120 120 292 292 649 790 908 927 976 749 372

Cross beam per metre

thickness 6 cm, height 20 cm charge per started 10 cm
with connections TRA6 124 124 217 276 289 302 314 247 145

For table top solutions, cross beams

are necessary for table tops and side
panels!

Butt connection per top part

with connection fixings SV6 L/R 62

For connecting table top

to side panel W6.. .
Total price = 2x SV6

Batten per metre

3 x 3 cm charge per started 10 cm
incl. fixing material AL33 21
max. length 300 cm

Please state required length on order.

71.10 1/2022
Processing / Accessories
for finishing tops, top and bottom and shelves

Type sketch Description Planning Type

Length connection per top part

tongue and groove joint VL 23
without pop-up fitting
Can be used with material thicknesses
of 1 up 6 cm

Length connection Extra charge for additional labour content. per top part
tongue and groove joint State required joint length. BVL 52
With excenter connection to the side This is necessary for longer than
that is not visible maximum length sizes.
Can be used with material thicknesses Total price = 2x BVL
of 1.6 up 6 cm

Corner connection Extra charge for additional labour content. per top part
tongue and groove joint State required joint length. BEV L/R 52
With excenter connection to the side When calculating top shelves, always
that is not visible start with longest length.
Can be used with material thicknesses Total price = 2x BEV
of 1.6 up 6 cm

Corner connection Extra charge for mitre cut and connection. per top part
tongue and groove joint When calculating top shelves, always BEVS L/R 115
for any angle start with longest length.
With excenter connection to the side Necessary to state angle (sketch).
that is not visible Total price = 2x BEVS
Can be used with material thicknesses
of 1.6 up 6 cm

External angle Extra charge for angle cut. BAO L/R 44

unedged When calculating top shelves, always
for any angle start with longest length.
Necessary to state angle (sketch).

External angle Extra charge for additional labour content. BA L/R 90

with edge for free angle When calculating top shelves, always
or exterior chamfer for start with longest length.
diagonal cupboards Necessary to state angle (sketch).
Not available for bottom shelves UBS.

External radii Extra charge for additional labour content. BARF 90

for KD and lacquered edges, the Only to sketch,
minimum radius is 2.5 cm and for necessary to state radius.
H edges the minimum radius is 15 cm Not available for bottom shelves UBS.

Cutout Extra charge for additional labour content. BAUK 141

chamfered and angled cutouts Necessary to state cutout (sketch).
with edge Not available for bottom shelves UBS.
90°

Well for power supply Minimum length for 6 cm thick shelves is 80 cm. for B6F..
1 milled groove in shelves Position is set at the factory. B6TF 55
depth 20 cm, width 17 cm, height 4 cm Not available for surface KG, FG, FB.
Please note: heat build-up on
shelf surface.

Drill hole for built-in lights Extra charge for drill holes and, diameter 7.8 cm
with diameter 7.8 cm for LE R if applicable, cutout for cable BO78 33
channel.
Possible from 1.6 cm strength.

Suspension fixing For additional fixing of top shelves. BEAH 58

Length 74 cm
height adjustable

MS 405 stainless steel

1/2022 71.11
Processing / Accessories
for finishing tops, top and bottom and shelves

Type sketch Description Planning Type

Tongue and groove connection for B3..

for continuing shelves BVF3 42

for B4..
BVF4 63

for B6..
BVF6 63

Eccentric connection For individual connection with side panels for B3..
fitted into side panels or shelves, or table tops. BVX3 47
connection bolt loose
for B4..
BVX4 65

for B6..
BVX6 65

Shelf support Shelf depth: min. 15 cm, max. 25 cm per piece

for shelf thicknesses from 1 to 2.8 cm minimum length 30 cm FBH2 17
MS 405 stainless steel look Permissible load: 12.5 kg/m
incl. fixing material
Necessary number:
Shelf width
30 to 100 cm = 2 pieces
101 to 150 cm = 3 pieces
151 to 200 cm = 4 pieces
201 to 280 cm = 5 pieces

Shelf support for B3F.. Essential to plan a side fixing or support per piece
for hidden shelf fixing for depth of 36 cm. FBH3 16
incl. milled recess in shelf Minimum depth 15 cm,
Necessary number: minimum length 30 cm.
Shelf width
30 to 50 cm = 2 pieces
51 to 100 cm = 3 pieces
101 to 160 cm = 4 pieces
161 to 280 cm = 5 pieces

Shelf support for B4F.. and B6F.. Essential to plan a side fixing or support per piece
for hidden shelf fixing for depth of 36 cm. for B4F..
incl. milled recess in shelf Minimum depth 25 cm, FBH4 53
Necessary number: minimum length 70 cm.
Shelf width for B6F..
70 to 140 cm = 2 pieces FBH6 53
141 to 210 cm = 3 pieces
211 to 280 cm = 4 pieces

71.12 1/2022
 Price group
Side panels in front finish

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type C1 C2 C3 C4 C5 C6 C7 C8
Side panel in front finish per metre .
Texture direction as front charge per started 10 cm
max. height 255 cm
with texture direction horizontal 201 cm
with VALAIS-C max. 153 cm
with ALURO-C colour 167 oxid silver max. 246 cm

Please state height and depth on order!

Indicate L/R for visible side.
Minimum charged 0.5 metres.

depth 10 cm WF10 L/R 64 74 92 117 138 160 191 217

up to depth 36.5 cm WF36 L/R 97 112 136 174 208 239 287 326
up to depth 48.5 cm WF48 L/R 110 123 175 229 270 304 351 390
up to depth 60 cm WF58 L/R 120 131 208 274 322 360 403 443
up to depth 70 cm WF68 L/R 130 142 238 320 374 415 456 496
up to depth 80 cm WF80 L/R 145 152 277 372 436 480 519 559
up to depth 90 cm WF90 L/R 154 161 307 418 486 536 573 612
up to depth 100 cm WF100 L/R 164 170 340 462 539 589 625 666
up to depth 120 cm WF120 L/R 184 188 402 553 642 699 731 771

Not available in IOS-C, IOS-M-C

For exposed walls (e.g. on islands) from the BOSSA-C range, please note: in order to ensure a suitable edge end in the grid, please order the side panel depth
as for front width or shortened in 2.5 cm steps.

1/2022 71.13
 Price group
Front panel material

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type C1 C2 C3 C4 C5 C6 C7 C8
Front panel material price per square metres
Length / Height

4 sides with blind edge FRMAT 182 188 341 477 531 586 658 701
thickness and reverse side décor correspond
Not available in IOS-C, IOS-M-C
with the respective front style

Width Please state length and width.

Texture direction = length
Ordered size of less than 0.4 m²
are calculated on the price of 0.4 m².
Alterations and adaptations not possible!
Minimum dimensions 10 x 25 cm.

Visible edge price per square metres

extra charge for 4 sided edging

in surface decor KAF4 0 0 32 32 32 32 32 32

Edges rounded / bevelled
F45 bevelled

Ordered size of less than 0.4 m²

are calculated on the price of 0.4 m².

Maximum ordering sizes

ALURO max. L/H 276 x W 120 cm LARGO-FG max. L/H 261 x W 120 cm STEEL max. L/H 261 x W 120 cm
Colour 167 oxid silver max. L/H 246 x W 120 cm
MADERO max. L/H 261 x W 120 cm STONE max. L/H 250 x W 76 cm
BONDI max. L/H 276 x W 120 cm
MARMO max. L/H 276 x W 120 cm SYNTHIA max. L/H 276 x W 120 cm
BOSSA max. L/H 270 x W 119.5 cm
MINERA max. L/H 276 x W 120 cm TERMA max. L/H 261 x W 120 cm
CERES max. L/H 276 x W 120 cm
ORLANDO max. L/H 276 x W 120 cm TOCCO max. L/H 276 x W 115 cm
CLASSIC-FF / -FS max. L/H 261 x W 120 cm
PEARL max. L/H 276 x W 120 cm TOPOS max. L/H 261 x W 120 cm
CONCRETE max. L/H 250 x W 76 cm
SELVA max. L/H 276 x W 120 cm VALAIS max. L/H 261 x W 120 cm
F 45 max. L/H 276 x W 120 cm max. L/H 120 x W 190 cm
SIRIUS max. L/H 276 x W 118 cm
IKONO max. L/H 276 x W 120 cm
SOLID max. L/H 276 x W 120 cm
LAIKA max. L/H 261 x W 120 cm

71.14 1/2022
Accessory surround STMAT STMAT PL STMAT2 STMAT2 PL
Maximum ordering sizes 1.6 cm 1.6 cm 1.6 cm 1.6 cm
finished one side half size panel finished both sides half size panel

Graining
Side panel material STMAT / STMAT2 max. max. max. max.
length/height x width length/height x width length/height x width length/height x width

K K = Laminate
032 magnolia 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
100 arctic 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
103 merino 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
120 frosty white 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
130 mohair 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
134 olive grey 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
136 sand grey 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
138 fossil grey 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
139 lava 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
201 keraton v 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
202 liton v 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
205 neroton v 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
273 platinum 276 x 120 cm 280 x 210 cm 276 x 120 cm 280 x 210 cm
282 alpine grey 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
284 carbon grey 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
286 black slate 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
408 metallic 261 x 120 cm 265 x 210 cm 261 x 120 cm 265 x 210 cm

KH KH = Laminate wood decor

227 japanese pine v 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
228 weather oak v 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
229 fjord oak v 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
233 antique oak v 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
234 highland oak v 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
239 karst oak v 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
240 walnut le midi v 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
241 black walnut v 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
345 mountain robinia v 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
368 tennessee walnut v 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm
386 stone oak  v 276 x 120 cm 280 x 207 cm 276 x 120 cm 280 x 207 cm

KG KG = Laminate gloss
032 magnolia 276 x 120 cm 280 x 210 cm 276 x 120 cm 280 x 210 cm
100 arctic 276 x 120 cm 280 x 210 cm 276 x 120 cm 280 x 210 cm
103 merino 276 x 120 cm 280 x 210 cm 276 x 120 cm 280 x 210 cm
120 frosty white 276 x 120 cm 280 x 210 cm 276 x 120 cm 280 x 210 cm
130 mohair 276 x 120 cm 280 x 210 cm 276 x 120 cm 280 x 210 cm
134 olive grey 276 x 120 cm 280 x 210 cm 276 x 120 cm 280 x 210 cm
136 sand grey 276 x 120 cm 280 x 210 cm 276 x 120 cm 280 x 210 cm
138 fossil grey 276 x 120 cm 280 x 210 cm 276 x 120 cm 280 x 210 cm
273 platinum 276 x 120 cm 280 x 210 cm 276 x 120 cm 280 x 210 cm
277 black 276 x 120 cm 280 x 210 cm 276 x 120 cm 280 x 210 cm
282 alpine grey 276 x 120 cm 280 x 210 cm 276 x 120 cm 280 x 210 cm
284 carbon grey 276 x 120 cm 280 x 210 cm 276 x 120 cm 280 x 210 cm

FF FF = Colour lacquered finely textured

032 magnolia 261 x 120 cm 261 x 120 cm
100 arctic 261 x 120 cm 261 x 120 cm
103 merino 261 x 120 cm 261 x 120 cm
120 frosty white 261 x 120 cm 261 x 120 cm
130 mohair 261 x 120 cm 261 x 120 cm
134 olive grey 261 x 120 cm 261 x 120 cm
136 sand grey 261 x 120 cm 261 x 120 cm
137 taupe grey 261 x 120 cm 261 x 120 cm
138 fossil grey 261 x 120 cm 261 x 120 cm
139 lava 261 x 120 cm 261 x 120 cm
273 platinum 261 x 120 cm 261 x 120 cm
277 black 261 x 120 cm 261 x 120 cm
279 midnight blue 261 x 120 cm 261 x 120 cm
282 alpine grey 261 x 120 cm 261 x 120 cm
284 carbon grey 261 x 120 cm 261 x 120 cm
285 basalt grey 261 x 120 cm 261 x 120 cm
448 cotta 261 x 120 cm 261 x 120 cm
449 fossena 261 x 120 cm 261 x 120 cm
488 dakar 261 x 120 cm 261 x 120 cm
489 manhattan 261 x 120 cm 261 x 120 cm
491 le havre 261 x 120 cm 261 x 120 cm
492 brasilia 261 x 120 cm 261 x 120 cm
497 corten 261 x 120 cm 261 x 120 cm
498 ferro 261 x 120 cm 261 x 120 cm
741 marès 261 x 120 cm 261 x 120 cm
742 cordillera 261 x 120 cm 261 x 120 cm
744 nasca 261 x 120 cm 261 x 120 cm

1/2022 71.15
Accessory surround STMAT STMAT PL STMAT2 STMAT2 PL
Maximum ordering sizes 1.6 cm 1.6 cm 1.6 cm 1.6 cm
finished one side half size panel finished both sides half size panel

Graining
Side panel material STMAT / STMAT2 max. max. max. max.
length/height x width length/height x width length/height x width length/height x width

745 iguazu 261 x 120 cm 261 x 120 cm

783 taj mahal sanded 261 x 120 cm 261 x 120 cm
784 white fantasy sanded 261 x 120 cm 261 x 120 cm
785 nero san marcos satined 261 x 120 cm 261 x 120 cm
786 steel gray satined 261 x 120 cm 261 x 120 cm
787 nero assoluto waterjet 261 x 120 cm 261 x 120 cm
789 negresco satined 261 x 120 cm 261 x 120 cm
790 breccia imperiale satined 261 x 120 cm 261 x 120 cm
791 black musk waterjet 261 x 120 cm 261 x 120 cm
RAL RAL-colours 261 x 120 cm 261 x 120 cm

PF PF = Colour lacquered grain texture

079 ash midnight blue v 276 x 120 cm 276 x 120 cm
082 ash alpine grey v 276 x 120 cm 276 x 120 cm
084 ash carbon grey v 276 x 120 cm 276 x 120 cm
085 ash basalt grey v 276 x 120 cm 276 x 120 cm
086 black slate v 276 x 120 cm 276 x 120 cm
400 ash arctic v 276 x 120 cm 276 x 120 cm
403 ash merino v 276 x 120 cm 276 x 120 cm
420 ash frosty white v 276 x 120 cm 276 x 120 cm
430 ash mohair v 276 x 120 cm 276 x 120 cm
432 ash magnolia v 276 x 120 cm 276 x 120 cm
434 ash olive grey v 276 x 120 cm 276 x 120 cm
436 ash sand grey v 276 x 120 cm 276 x 120 cm
437 ash taupe grey v 276 x 120 cm 276 x 120 cm
438 ash fossil grey v 276 x 120 cm 276 x 120 cm
439 ash lava v 276 x 120 cm 276 x 120 cm
473 ash platinum v 276 x 120 cm 276 x 120 cm
RAES RAL-colours ash v 276 x 120 cm 276 x 120 cm

FS FS = Colour lacquered silk matt

032 magnolia 261 x 120 cm 261 x 120 cm
100 arctic 261 x 120 cm 261 x 120 cm
103 merino 261 x 120 cm 261 x 120 cm
120 frosty white 261 x 120 cm 261 x 120 cm
130 mohair 261 x 120 cm 261 x 120 cm
134 olive grey 261 x 120 cm 261 x 120 cm
136 sand grey 261 x 120 cm 261 x 120 cm
137 taupe grey 261 x 120 cm 261 x 120 cm
138 fossil grey 261 x 120 cm 261 x 120 cm
139 lava 261 x 120 cm 261 x 120 cm
273 platinum 261 x 120 cm 261 x 120 cm
277 black 261 x 120 cm 261 x 120 cm
279 midnight blue 261 x 120 cm 261 x 120 cm
282 alpine grey 261 x 120 cm 261 x 120 cm
284 carbon grey 261 x 120 cm 261 x 120 cm
285 basalt grey 261 x 120 cm 261 x 120 cm
286 black slate 261 x 120 cm 261 x 120 cm
RAL RAL-colours 261 x 120 cm 261 x 120 cm

KM KM = Laminate matt
100 arctic 276 x 120 cm
103 merino 276 x 120 cm
120 frosty white 276 x 120 cm
130 mohair 276 x 120 cm
134 olive grey 276 x 120 cm
137 taupe grey 276 x 120 cm
138 fossil grey 276 x 120 cm
279 midnight blue 276 x 120 cm
284 carbon grey 276 x 120 cm
286 black slate 276 x 120 cm

FG FG = Colour lacquered gloss

032 magnolia 261 x 120 cm 261 x 120 cm
100 arctic 261 x 120 cm 261 x 120 cm
103 merino 261 x 120 cm 261 x 120 cm
106 brilliant white 261 x 120 cm 261 x 120 cm
120 frosty white 261 x 120 cm 261 x 120 cm
130 mohair 261 x 120 cm 261 x 120 cm
134 olive grey 261 x 120 cm 261 x 120 cm
136 sand grey 261 x 120 cm 261 x 120 cm
137 taupe grey 261 x 120 cm 261 x 120 cm
138 fossil grey 261 x 120 cm 261 x 120 cm
139 lava 261 x 120 cm 261 x 120 cm

71.16 1/2022
Accessory surround STMAT STMAT PL STMAT2 STMAT2 PL
Maximum ordering sizes 1.6 cm 1.6 cm 1.6 cm 1.6 cm
finished one side half size panel finished both sides half size panel

Graining
Side panel material STMAT / STMAT2 max. max. max. max.
length/height x width length/height x width length/height x width length/height x width

270 graphite grey 261 x 120 cm 261 x 120 cm

273 platinum 261 x 120 cm 261 x 120 cm
277 black 261 x 120 cm 261 x 120 cm
279 midnight blue 261 x 120 cm 261 x 120 cm
282 alpine grey 261 x 120 cm 261 x 120 cm
284 carbon grey 261 x 120 cm 261 x 120 cm
285 basalt grey 261 x 120 cm 261 x 120 cm
286 black slate 261 x 120 cm 261 x 120 cm
292 silver 261 x 120 cm 261 x 120 cm
293 metal 261 x 120 cm 261 x 120 cm
294 anthracite 261 x 120 cm 261 x 120 cm
RAL RAL-colours 261 x 120 cm 261 x 120 cm

MC MC = Metallic lacquer iridescent

093 copper shadow 261 x 120 cm 261 x 120 cm
094 lava shadow 261 x 120 cm 261 x 120 cm

H H = Wood veneer
218 elm natural v 261 x 120 cm 261 x 120 cm
221 textured oak abruzzo v 261 x 120 cm 261 x 120 cm
222 textured natural oak v 261 x 120 cm 261 x 120 cm
223 textured oak barrique v 261 x 120 cm 261 x 120 cm
262 wild oak alpine v 261 x 120 cm 261 x 120 cm
263 wild oak copper v 261 x 120 cm 261 x 120 cm
264 wild oak abruzzo v 261 x 120 cm 261 x 120 cm
266 wild oak barrique v 261 x 120 cm 261 x 120 cm
267 wild oak marsh v 261 x 120 cm 261 x 120 cm
309 bergamo elm v 261 x 120 cm 261 x 120 cm
310 ash madeira v 261 x 120 cm 261 x 120 cm
312 walnut v 261 x 120 cm 261 x 120 cm
313 textured oak copper v 261 x 120 cm 261 x 120 cm
316 textured oak marsh v 261 x 120 cm 261 x 120 cm
360 maraval chestnut v 261 x 120 cm 261 x 120 cm
435 alpine natural oak v 261 x 120 cm 261 x 120 cm
750 alpine oak smooth v 261 x 120 cm 261 x 120 cm
752 walnut smooth v 261 x 120 cm 261 x 120 cm

VM VM = Coloured with special matt lacquer finish

100 arctic 276 x 120 cm
103 merino 276 x 120 cm
120 frosty white 276 x 120 cm
130 mohair 276 x 120 cm
134 olive grey 276 x 120 cm
138 fossil grey 276 x 120 cm
152 kiruna v 276 x 120 cm 276 x 120 cm
210 marmobianco v 276 x 120 cm 276 x 120 cm
211 marmonero v 276 x 120 cm 276 x 120 cm
284 carbon grey 276 x 120 cm 276 x 120 cm
286 black slate 276 x 120 cm 276 x 120 cm

VS VS = Metal foil satin finish smooth

405 stainless steel 240 x 118 cm 240 x 118 cm

L L = Worktop decor
032 magnolia 405 x 100 cm 405 x 100 cm
100 arctic 405 x 100 cm 405 x 100 cm
103 merino 405 x 100 cm 405 x 100 cm
120 frosty white 405 x 100 cm 405 x 100 cm
130 mohair 405 x 100 cm 405 x 100 cm
134 olive grey 405 x 100 cm 405 x 100 cm
136 sand grey 405 x 100 cm 405 x 100 cm
138 fossil grey 405 x 100 cm 405 x 100 cm
152 kiruna v 405 x 100 cm 405 x 100 cm
177 trentino porphyr 405 x 100 cm 405 x 100 cm
201 keraton v 405 x 100 cm 405 x 100 cm
202 liton v 405 x 100 cm 405 x 100 cm
204 carboton v 405 x 100 cm 405 x 100 cm
205 neroton v 405 x 100 cm 405 x 100 cm
210 marmobianco v 405 x 100 cm 405 x 100 cm
211 marmonero v 405 x 100 cm 405 x 100 cm
227 japanese pine v 405 x 100 cm 405 x 100 cm
228 weather oak v 405 x 100 cm 405 x 100 cm
229 fjord oak v 405 x 100 cm 405 x 100 cm
233 antique oak v 405 x 100 cm 405 x 100 cm

1/2022 71.17
Accessory surround STMAT STMAT PL STMAT2 STMAT2 PL
Maximum ordering sizes 1.6 cm 1.6 cm 1.6 cm 1.6 cm
finished one side half size panel finished both sides half size panel

Graining
Side panel material STMAT / STMAT2 max. max. max. max.
length/height x width length/height x width length/height x width length/height x width

234 highland oak v 405 x 100 cm 405 x 100 cm

239 karst oak v 405 x 100 cm 405 x 100 cm
240 walnut le midi v 405 x 100 cm 405 x 100 cm
241 black walnut v 405 x 100 cm 405 x 100 cm
273 platinum 405 x 100 cm 405 x 100 cm
282 alpine grey 405 x 100 cm 405 x 100 cm
345 mountain robinia v 405 x 100 cm 405 x 100 cm
368 tennessee walnut v 405 x 100 cm 405 x 100 cm
453 ouro preto 405 x 100 cm 405 x 100 cm
456 oxide brown 405 x 100 cm 405 x 100 cm
458 oxide grey beige 405 x 100 cm 405 x 100 cm
481 dark concrete 405 x 100 cm 405 x 100 cm

71.18 1/2022
 Surface style
Side panel material STMAT
Maximum order sizes see pages 71.15 - 18.

Worktop decors

Neutral
FF
K PF FS
Type sketch Description/Planning Type KH KG VM ME KM FG MC H VS L
Side panel material, finished one side price per square metres
Length / Height

1.6 cm thick STMAT 111 111 212 269 - 301 350 276 250 201
4 sides with blind edge
reverse side without surface requirement

Width Please state length and width.

Texture direction = length
Ordered size of less than 0.4 m²
are calculated on the price of 0.4 m².
Alterations and adaptations not possible!

Visible edge price per square metres

extra charge for 4 sided edging in KA4 0 0 30 30 30 30 30 33 - -
surface decor
edges soft

Ordered size of less than 0.4 m²

are calculated on the price of 0.4 m².

Side panel material, finished one side price per piece

Length / Height

Half size panel STMATPL 226 247 - - - - - - - -

unedged
1.6 cm thick
reverse side without surface requirement
Width

Alterations and adaptations not possible!

Edgings at factory not possible.

Edge material per metre

Plastic edge 23 x 1.3 mm KAA23 4 4 - - - - - - - -

Minimum calculation 5 metres.

Surface style
Side panel material STMAT2
Maximum order sizes see pages 71.15 - 18.

Worktop decors

Neutral
FF
K PF FS
Type sketch Description/Planning Type KH KG VM ME KM FG MC H VS L
Side panel material, finished both sides price per square metres
Length / Height

1.6 cm thick STMAT2 115 115 280 386 420 454 539 419 - -
4 sides with blind edge
reverse side and front

Width Please state length and width.

Texture direction = length
Ordered size of less than 0.4 m²
are calculated on the price of 0.4 m².
Alterations and adaptations not possible!

Visible edge price per square metres

extra charge for 4 sided edging in KA4 0 0 30 30 30 30 30 33 - -
surface decor
edges soft

Ordered size of less than 0.4 m²

are calculated on the price of 0.4 m².

Side panel material, finished both sides price per piece

Length / Height

Half size panel STMAT2PL 249 253 - - - - - - - -

unedged
1.6 cm thick
reverse side and front
Width

Alterations and adaptations not possible!

Edgings at factory not possible.

Edge material per metre

Plastic edge 23 x 1.3 mm KAA23 4 4 - - - - - - - -

Minimum calculation 5 metres.

1/2022 71.19
Glass side panels
Thickness 0.7 cm

Type sketch Description Planning Type

Glass side panel WGL.. Please state height and depth on order! per metre
thickness 0.7 cm Minimum length for calculation, 50 cm. charge per started 10 cm
glass thickness 0.6 cm For fixing, glass panels always require .
White glass (ESG) glossy on one side, a cupboard side!
reverse colour lacquered
all edges bevelled and chamfered,
corners chamfered up to a depth of 60 cm WGL1260 L/R 478
special adhesive tape up to a depth of 70 cm WGL1270 L/R 552
maximum height 250 cm up to a depth of 90 cm WGL1290 L/R 698
up to a depth of 120 cm WGL12120 L/R 917
up to a depth of 130 cm WGL12130 L/R 984

Glass side panel WGS.. Please state height and depth on order! per metre
thickness 0.7 cm Minimum length for calculation, 50 cm. charge per started 10 cm
glass thickness 0.6 cm For fixing, glass panels always require .
White glass (ESG) satin finished one side, a cupboard side!
reverse colour lacquered
all edges bevelled and chamfered,
corners chamfered up to a depth of 60 cm WGS1260 L/R 555
special adhesive tape up to a depth of 70 cm WGS1270 L/R 641
maximum height 250 cm up to a depth of 90 cm WGS1290 L/R 815
up to a depth of 120 cm WGS12120 L/R 1071
up to a depth of 130 cm WGS12130 L/R 1170

Extra charge RAL / NCS MPRAL 423

Coloured glass elements such as fronts, worktops, side panels and niche rear panels are matched with great care. The white glass used, forms the basis of a
high degree of neutral colouring. However, even this high quality glass is subject to slight colour fluctuations - even within a batch.
Hence, glass elements of the same colour can only be manufactured with approximately matching colours.
The refraction of glass, based on physical reasons, produces additional colour effects, depending on the installation position, the thickness of the glass, illu-
mination and selected colour of the glass elements.

Colour choice

Style GL and GS
032 magnolia 139 lava
100 arctic 273 platinum
103 merino 277 black
120 frosty white 279 midnight blue
130 mohair 282 alpine grey
134 olive grey 284 carbon grey
136 sand grey 285 basalt grey
137 taupe grey 286 black slate
138 fossil grey RAL RAL/NCS-colours

For RAL colours please remember extra charge

type MP RAL.

71.20 1/2022
 Surface style
Side panel tables Descriptions / colours see surround accessories chapter 11.

Thickness 2.8 cm

Worktop decors
AL

Neutral
FF FB
K PF FS MC
Type sketch Description/Planning Type KH KG VM ME KM FG MF H L
Side panel table .
Length up to 160 cm
height 73 cm
1 table top
2 side panels
1 stabilising bar 20 cm high
prepared for installation
in centre of the table
1 set of connection fixings
for fitting on site

up to depth 80 cm W3WT80 462 462 975 1248 1390 1496 1709 1448 966
up to depth 90 cm W3WT90 483 483 1060 1362 1516 1617 1850 1570 1038
up to depth 100 cm W3WT100 507 507 1145 1473 1638 1739 1990 1694 1109
up to depth 120 cm W3WT120 530 530 1230 1586 1763 1861 2129 1817 1178

Side panel dock-on table .

Length up to 160 cm
height 73 cm
1 table top
1 side panel
1 stabilising bar 20 cm high
prepared for installation
in centre of the table
1 set of connection fixings
for fitting on site

up to depth 80 cm W3AT80 362 362 765 984 1096 1168 1337 1163 775
up to depth 90 cm W3AT90 378 378 828 1068 1189 1257 1440 1257 830
up to depth 100 cm W3AT100 397 397 892 1151 1280 1345 1541 1352 885
up to depth 120 cm W3AT120 415 415 955 1235 1373 1434 1643 1447 938

Please state length and depth on order!

Extendible to max. 200 cm length, max. 120 cm depth and max. 120 cm height.
Plan optional side panel height adjustment WH3 or side panel floor fixing WB3.

Table extension per 10 cm

per 10 cm length W3TV 17 17 37 48 53 56 64 59 39
from 161 cm up to max. 200 cm length

Side panel extension for per 10 cm

dock-on table W3WV1 11 11 30 40 44 50 58 43 27
per 10 cm height
from 74 cm up to max. 120 cm height

Side panel extension for table per 10 cm

per 10 cm height W3WV2 19 19 54 71 79 89 103 74 48
from 74 cm up to max. 120 cm height

Side panel bench W3WB50 366 366 659 833 925 1021 1161 989 696
Length up to 160 cm
up to depth 50 cm
Height 53 cm
1 seat panel
2 side panels
1 stabilising bar 20 cm high
prepared for installation
in centre of bench
1 set of connection fixings
for fitting on site

Please state length and depth

on order!
Extendible to max. 200 cm length.
Plan optional side panel height adjustment WH3.

Bench extension per 10 cm

per 10 cm length W3BV 14 14 27 35 39 42 48 43 29
from 161 cm up to max. 200 cm length

1/2022 71.21
 Surface style
Side panel tables Descriptions / colours see surround accessories chapter 11.

Thickness 4 cm

Worktop decors

Neutral
Type sketch Description/Planning Type KM L
Side panel table .
Length up to 160 cm
height 73 cm
1 table top
2 side panels
1 stabilising bar 20 cm high
prepared for installation
in centre of the table
1 set of connection fixings
for fitting on site

up to depth 80 cm W4WT80 1857 1030

up to depth 90 cm W4WT90 1862 1101
up to depth 100 cm W4WT100 2049 1175
up to depth 120 cm W4WT120 2294 1247

Side panel dock-on table .

Length up to 160 cm
height 73 cm
1 table top
1 side panel
1 stabilising bar 20 cm high
prepared for installation
in centre of the table
1 set of connection fixings
for fitting on site

up to depth 80 cm W4AT80 1468 814

up to depth 90 cm W4AT90 1469 869
up to depth 100 cm W4AT100 1614 926
up to depth 120 cm W4AT120 1804 981

Please state length and depth on order!

Extendible to max. 200 cm length, max. 120 cm depth and max. 120 cm height.
Plan optional side panel height adjustment WH4 or side panel floor fixing WB4.

Table extension per 10 cm

per 10 cm length W4TV 72 40
from 161 cm up to max. 200 cm length

Side panel extension for per 10 cm

dock-on table W4WV1 49 27
per 10 cm height
from 74 cm up to max. 120 cm height

Side panel extension for table per 10 cm

per 10 cm height W4WV2 88 49
from 74 cm up to max. 120 cm height

Side panel bench W4WB50 1215 747

Length up to 160 cm
up to depth 50 cm
Height 53 cm
1 seat panel
2 side panels
1 stabilising bar 20 cm high
prepared for installation
in centre of bench
1 set of connection fixings
for fitting on site

Please state length and depth

on order!
Extendible to max. 200 cm length.
Plan optional side panel height adjustment WH4.

Bench extension per 10 cm

per 10 cm length W4BV 54 30
from 161 cm up to max. 200 cm length

71.22 1/2022
 Surface style
Side panel tables Descriptions / colours see surround accessories chapter 11.

Thickness 6 cm

Worktop decors

Neutral
FF FB
K PF FS MC
Type sketch Description/Planning Type KH KG VM ME KM FG MF H L
Side panel table .
Length up to 160 cm
height 73 cm
1 table top
2 side panels
1 stabilising bar 20 cm high
prepared for installation
in centre of the table
1 set of connection fixings
for fitting on site

up to depth 80 cm W6WT80 869 869 1506 1826 1948 2000 2092 1899 1060
up to depth 90 cm W6WT90 930 930 1647 1996 2129 2186 2289 2079 1134
up to depth 100 cm W6WT100 986 986 1784 2166 2310 2372 2483 2259 1208
up to depth 120 cm W6WT120 1047 1047 1926 2335 2491 2558 2683 2435 1285

Side panel dock-on table .

Length up to 160 cm
height 73 cm
1 table top
1 side panel
1 stabilising bar 20 cm high
prepared for installation
in centre of the table
1 set of connection fixings
for fitting on site

up to depth 80 cm W6AT80 685 685 1178 1439 1519 1553 1625 1520 839
up to depth 90 cm W6AT90 732 732 1283 1565 1652 1689 1768 1659 896
up to depth 100 cm W6AT100 774 774 1385 1691 1784 1824 1910 1799 953
up to depth 120 cm W6AT120 821 821 1490 1818 1917 1959 2055 1933 1013

Please state length and depth on order!

Extendible to max. 200 cm length, max. 120 cm depth and max. 120 cm height.
Plan optional side panel height adjustment WH6 or side panel floor fixing WB6.

Table extension per 10 cm

per 10 cm length W6TV 33 33 57 71 73 74 78 77 41
from 161 cm up to max. 200 cm length

Side panel extension for per 10 cm

dock-on table W6WV1 22 22 48 58 65 68 72 56 28
per 10 cm height
from 74 cm up to max. 120 cm height

Side panel extension for table per 10 cm

per 10 cm height W6WV2 40 40 85 103 116 121 128 99 50
from 74 cm up to max. 120 cm height

Side panel bench W6WB50 642 642 996 1202 1272 1302 1360 1250 768
Length up to 160 cm
up to depth 50 cm
Height 53 cm
1 seat panel
2 side panels
1 stabilising bar 20 cm high
prepared for installation
in centre of bench
1 set of connection fixings
for fitting on site

Please state length and depth

on order!
Extendible to max. 200 cm length.
Plan optional side panel height adjustment WH6.

Bench extension per 10 cm

per 10 cm length W6BV 25 25 40 50 52 53 56 53 31
from 161 cm up to max. 200 cm length

1/2022 71.23
1/2022
Niche

Niche panels 72. 01

Niche panels in front finish 72. 02

Niche panels - Accessories 72. 03

Glass niche panels 72. 04

Glass niche panels - Variations 72. 05-06

Niche system DOMO 72. 06-07

Niche
72.

1/2022 72.
Niche

72.

72. 1/2022
 Surface style
Niche panels Descriptions / colours see surround accessories chapter 11.

Worktop decors
AL

Neutral
FF FB
K PF FS MC
Type sketch Description/Planning Type Height KH KG VM ME KM FG MF H L
Niche panel per metre
with horizontal grain direction charge per started 10 cm
1.6 cm thick up to
visible edge allround WVW30 30 21 25 38 40 102 90 128 108 58
Grain direction Max. width 260 cm (detailed dimension information WVW54 54 38 44 68 72 184 162 231 195 104
horizontal can be found in chapter 71). WVW68 68 48 56 85 91 231 204 291 245 131
With heights of more than 120 cm, WVW81 81 57 66 101 109 275 243 347 293 155
max. width 120 cm. WVW100 100 70 82 125 134 340 300 428 361 192
WVW120 120 84 98 150 161 408 360 514 433 230
Add niche profiles WV PU .. for worktop or WVW150 150 105 123 188 201 510 450 642 541 287
floor connection together with wall unit
connection WV PO .. .
An arrangement with shelves or DOMO necessitates
drilling on site.
Do not plan niche panels in surface finish FB
behind hobs.
WVW 150 in the surfaces KM and L only possible
up to height 128 cm.

Niche panel per metre

with vertical grain direction charge per started 10 cm
1.6 cm thick up to
visible edge allround WVS30 30 21 - 38 - - - - 108 -
Grain direction maximum widths: WVS54 54 38 - 68 - - - - 195 -
vertical styles K / KH max. 200 cm, WVS68 68 48 - 85 - - - - 245 -
styles PF / VM / H max. 120 cm WVS81 81 57 - 101 - - - - 293 -
With heights of more than 120 cm, WVS100 100 70 - 125 - - - - 361 -
max. width 120 cm. WVS120 120 84 - 150 - - - - 433 -
WVS150 150 105 - 188 - - - - 541 -
Add niche profiles WV PU .. for worktop or
floor connection together with wall unit
connection WV PO .. .
An arrangement with shelves or DOMO necessitates
drilling on site.
For higher niche panels please use
the type WVSW .., see page 73.01.

1,6 Niche profile below per piece

stainless steel look Length 200 cm
for bottom fixing of WVPU200 23
niche cladding with
1,7

0,8
sealing lip and fixing Length 400 cm
2,7 screws WVPU400 32

1 Niche profile above per piece

5
stainless steel look Length 200 cm
1,5 for upper fixing of WVPO200 26
2,2

niche cladding with

fixing screws Length 400 cm
WVPO400 36
1,6

Accessory bag per piece

Contents: WVZB 8
2 end caps each left and right
for profile above and below

Metal covering profile per metre

0,2 stainless steel colour charge per started 10 cm
as upper finishing edge WVWAP 9
to niche panels

1,6 Apply on site, self adhesive,

max. length 250 cm.

Length connection per top part

tongue and groove joint VL 23
without pop-up fitting

1/2022 72.01
 Price group
Niche panels in front finish

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Height C1 C2 C3 C4 C5 C6 C7 C8
Niche panel per metre
in front finish charge per started 10 cm
Texture direction as front up to
Max. width 250 cm (detailed dimension information WVF30 30 24 33 68 143 166 188 213 -
can be found on page 71.14). WVF54 54 44 60 155 255 300 339 383 -
With heights of more than 120 cm, WVF68 68 56 74 190 320 374 415 456 -
max. width 120 cm. WVF81 81 66 89 224 377 440 485 524 -
WVF100 100 81 110 272 462 539 589 625 -
Minimum charged 0.5 metres. WVF120 120 97 132 323 553 642 699 731 -
An arrangement with shelves or DOMO necessitates WVF150 150 122 165 398 688 798 864 889 -
drilling on site.
Not available in BOSSA-C, IOS-C, IOS-M-C, VALAIS-C

Niche panel per metre

programme VALAIS charge per started 10 cm
with horizontal plank appearance up to
Alternate plank thicknesses WVF30B 30 - - - - - - - 171
17.4 / 18.9 and 20.4 mm WVF54B 54 - - - - - - - 307
Max. width 260 cm, with heights of more than WVF68B 68 - - - - - - - 390
120 cm, max. width 120 cm. WVF81B 81 - - - - - - - 462
Possible colours: 335h alpine natural oak WVF100B 100 - - - - - - - 572
WVF120B 120 - - - - - - - 686
Minimum charged 0.5 metres. WVF150B 150 - - - - - - - 857
Niche profiles WV PU and WV PO not possible. old WVW .. B

Available in VALAIS-C

Niche panel for sockets per metre

programme VALAIS charge per started 10 cm
with horizontal plank appearance up to
Alternate plank thicknesses WVF30SB 30 - - - - - - - 171
17.4 / 18.9 and 20.4 mm WVF54SB 54 - - - - - - - 307
Max. width 260 cm, with heights of more than WVF68SB 68 - - - - - - - 390
120 cm, max. width 120 cm. WVF81SB 81 - - - - - - - 462
Possible colours: 335h alpine natural oak WVF100SB 100 - - - - - - - 572
WVF120SB 120 - - - - - - - 686
Minimum charged 0.5 metres. WVF150SB 150 - - - - - - - 857
The lowest board is 16 cm high for fitting sockets old WVW .. SB
on site. Please place the cut-outs of this height
in the middle. Available in VALAIS-C
Niche profiles WV PU and WV PO not possible.

Niche panel per metre

programme BOSSA charge per started 10 cm
With vertical embossed lines up to
Max. width 119.5 cm WVF30L 30 - - - - - - 213 -
WVF54L 54 - - - - - - 383 -
Minimum charged 0.5 metres. WVF68L 68 - - - - - - 456 -
To ensure a continuous line grid and a matching edge WVF81L 81 - - - - - - 524 -
end, the panels should be set with a 0.5 cm joint. WVF100L 100 - - - - - - 625 -
Therefore, please order either the niche panel like front WVF120L 120 - - - - - - 731 -
width (e.g. 60 cm door width = final dimension 59.5 cm) WVF150L 150 - - - - - - 889 -
or shortened in 2.5 cm steps.
When planning sockets, please note the recesses between Available in BOSSA-C
socket blender and embossed rear wall.
Niche system DOMO not possible.
Niche profiles WV PU and WV PO not possible.

72.02 1/2022
 Price group
Niche panels
Accessories

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Width C1 C2 C3 C4 C5 C6 C7 C8
Wall panel with LED-lighting 6.5 watt
for fixed positioning on WBLE60 60 205
niche cladding 8.5 watt
Depth 16 cm WBLE80 80 233
F = Coloured 10 watt
100 arctic 138 fossil grey WBLE90 90 244
103 merino 282 alpine grey 11 watt
120 frosty white 284 carbon grey WBLE100 100 259
130 mohair 286 black slate 13 watt
134 olive grey 307 carbon glimmer WBLE120 120 287
1 light with LED-strip
mounted in wall panel below
Light temperature 4000K or variable of
2700 to 6400K with dimmer possible
Cable outlet right
1 connection cable 300 cm
Energy efficiency class E up to F

The light can be operated either with the power

supply set S24 4000K or with the dynamic light
control S24 DL .. .
State position on niche panels:
a = distance measurement from left
R1 = height measurement in the grid of 20 cm
R2 = height measurement in the grid of 30 cm
Planning over longitudinal joints of niche cladding
not possible!
Only possible with niche cladding WVW .., WVS ..
or WVF .. (except for glass niche cladding).

R1 R2

100 105

80 75
60 WB LE 60

40 45

20 15

1/2022 72.03
Glass niche panels

Type sketch Description Planning Type

Glass niche panel Maximum measurement: 250 x 70 cm or 150 x 125 cm .

with support top minimum measurement: 25 x 25 cm
total thickness 1.6 cm Minimum charged 0.5 square metres.
Add niche profiles WV PU .. for worktop or floor connection
together with wall unit connection WV PO .. .
1 white glass top, glossy (ESG) For the silicone joint 0.25 cm will be deducted from the price per square metres
0.4 cm thick height measurement ordered. That means the supplied WVWGL2 358
all edges polished glass height is 0.25 cm smaller than that ordered.
1,2 1 support top with metal-look
0,4 surround edge
1 spacer for silicone joint with worktop

1 white glass top satin finished (ESG) price per square metres
0.4 cm thick WVWGS2 358
all edge polished
1 support top with metal-look
surround edge
1 spacer for silicone joint with worktop

Glass niche panel Maximum measurement: 250 x 70 cm or 150 x 125 cm .

thickness 0.4 cm minimum measurement: 25 x 25 cm
Minimum charged 0.5 square metres.
For the silicone joint 0.25 cm will be deducted from the
1 white glass top, glossy (ESG) height measurement ordered. That means the supplied price per square metres
0.4 cm thick glass height is 0.25 cm smaller than that ordered. GVGL2 287
all edges polished
1 spacer for silicone joint with worktop
0,4

1 white glass top satin finished (ESG) price per square metres
0.4 cm thick GVGS2 287
all edge polished
1 spacer for silicone joint with worktop

Extra charge RAL / NCS MPRAL 423

Coloured glass elements such as fronts, worktops, side panels and niche rear panels are matched with great care. The white glass used, forms the basis of a
high degree of neutral colouring. However, even this high quality glass is subject to slight colour fluctuations - even within a batch.
Hence, glass elements of the same colour can only be manufactured with approximately matching colours.
The refraction of glass, based on physical reasons, produces additional colour effects, depending on the installation position, the thickness of the glass, illu-
mination and selected colour of the glass elements.

Colour choice

GL2 = Glossy white glass GS2 = White glass satin finished For RAL colours please remember extra charge
032 magnolia 273 platinum 032 magnolia 139 lava type MP RAL.
100 arctic 277 black 100 arctic 273 platinum
103 merino 279 midnight blue 103 merino 277 black
120 frosty white 282 alpine grey 120 frosty white 279 midnight blue
130 mohair 284 carbon grey 130 mohair 282 alpine grey
134 olive grey 286 black slate 134 olive grey 284 carbon grey
136 sand grey 292 silver 136 sand grey 286 black slate
137 taupe grey 293 metal 137 taupe grey RAL RAL/NCS-colours
138 fossil grey 294 anthracite 138 fossil grey
139 lava RAL RAL/NCS-colours

72.04 1/2022
Glass niche panels
Variations

Type sketch Description Planning Type

Chamfer External chamfer to sketch, 1.6 cm thick

with free angle necessary to state angle. ASWVWGL 73
with polished edge
0.4 cm thick
ASGVGL 54

External radii Only to sketch, 1.6 cm thick

with polished edge necessary to state radius. ARFWVWGL 73

0.4 cm thick
ARFGVGL 54

Inner curve Only to sketch, 1.6 cm thick

inner radius minimum 6 cm necessary to state radius. IRWVWGL 166
min. 12 cm

with polished edge

0.4 cm thick
IRGVGL 135

Cutout Please state desired size and position (sketch). 1.6 cm thick
with interior radius 1 cm Necessary to state angle. AUKWVWGL 166
min. 12 cm

unpolished edge
0.4 cm thick
AUKGVGL 135

Socket cutout Please state position (sketch). 1.6 cm thick

for 1 socket Please state measurements from left (x) and from below (y) S1WVWGL 34
min. 5 cm

cutout Ø 6.8 cm up to cut-out centre!

y

0.4 cm thick
x S1GVGL 29
min. 6 cm

Socket cutout Please state position (sketch). 1.6 cm thick

for 2 sockets Please state measurements from left (x) and from below (y) S2WVWGL 50
min. 5 cm

cutout 13.9 x 6.8 cm up to cut-out centre!

y

0.4 cm thick
x S2GVGL 42
min. 6 cm

Socket cutout Please state position (sketch). 1.6 cm thick

for 3 sockets Please state measurements from left (x) and from below (y) S3WVWGL 61
min. 5 cm

cutout 21 x 6.8 cm up to cut-out centre!

y

0.4 cm thick
x S3GVGL 54
min. 6 cm

Socket cutout Please state position (sketch). 1.6 cm thick

for 4 sockets Please state measurements from left (x) and from below (y) S4WVWGL 88
min. 5 cm

cutout 28.1 x 6.8 cm up to cut-out centre!

y

0.4 cm thick
x S4GVGL 78
min. 6 cm

Socket cutout Please state position (sketch). 1.6 cm thick

R1 for 1 socket USA-standard Please state measurements from left (x) and from below (y) S1WVWUSGL 61
min. 5 cm

cutout 10 x 6 cm up to cut-out centre!

y

all four corners with 1 cm inner radius 0.4 cm thick

x S1GVUSGL 69
min. 6 cm

R1 Socket cutout Please state position (sketch). 1.6 cm thick

for 2 sockets USA-standard Please state measurements from left (x) and from below (y) S2WVWUSGL 61
min. 5 cm

cutout 10 x 10 cm up to cut-out centre!

y

all four corners with 1 cm inner radius 0.4 cm thick

x S2GVUSGL 54
min. 6 cm

Drill hole 0.5 to 1.2 cm diameter Please state diameter and position per drilling
(sketch). 1.6 cm thick
AMBOWVW 28

0.4 cm thick
AMBOGV 23

Drill holes for DOMO-railing Please state position (sketch). Drill holes per railing
Upper edge of the DOMO-railing min. 36 cm 1.6 cm thick
above worktop. NSMBOWVW 61
Not straddling worktop joints.
Available for WVW GL2 and WVW GS2.
min. 36 cm

1/2022 72.05
Glass niche panels
Variations

Type sketch Description Planning Type

Drill holes for tablet PC holder Please state position (sketch). 1.6 cm thick
2 drill holes for holder Upper edge of the tablet PC holder min. 24 cm TPCHBOWVW 61
1 drill hole for cable above worktop.
Available for WVW GL2 and WVW GS2.

min. 24 cm

Niche system DOMO

Type sketch Description Planning Type AE

DOMO-railing Minimum length 30 cm and per metre
Anodised aluminium maximum length 300 cm. charge per started 10 cm
4 x 1 cm From 91 cm length with additional mid-fixing. NSM 77
Upper edge of the DOMO-railing min. 36 cm
above worktop.

DOMO-railing Minimum length 30 cm and per metre

with LED-lighting maximum length 300 cm. charge per started 10 cm
Light temperature 4000K, neutral white From 91 cm length with additional mid-fixing. NSMLED 165
Luminous flux 500 lm/m Upper edge of the DOMO-railing min. 36 cm
Anodised aluminium above worktop.
4 x 1 cm Possible to connect to central
Cable outlet left switch ZSM, BZS and FZS.
1 adapter 240 volt, 12 volt, 15 watt
Energy efficiency class G

DOMO-board NSMB 42
40 cm long
storage tray 12 cm deep

DOMO-household paper holder NSMPH 67

35 cm long
storage tray 6 cm deep
1 rail lacquered natural oak

DOMO-hook bar NSMHL 84

30 cm long
storage tray 6 cm deep

DOMO-receptacle NSMK 104

15 cm long
storage tray 6 cm deep
1 receptacle, lacquered natural oak
with 2 plug-in dividing bars

DOMO-knife holder Provide at least 15 cm free space upwards to the wall unit. NSMMH 156
30 cm long
storage tray 6 cm deep
1 knife holder lacquered natural oak
for 5 knives

DOMO-knife holder Provide at least 15 cm free space upwards to the wall unit. NSMMH5 232
with knife-set
30 cm long
storage tray 6 cm deep
1 knife holder lacquered natural oak
for 5 knives
1 5-part knife set
- vegetable knife
- boning knife
- filleting knife
- chefs knife
- bread knife

72.06 1/2022
Niche system DOMO

Type sketch Description Planning Type AE

DOMO-tablet PC holder NSMTPCH 75
20 cm long
1 stand for tablet PC
with cut-out for power cable

DOMO-fresh herbs tray NSMFKA 220

42 cm long
storage tray 15 cm deep
1 shelf lacquered natural oak
3 overpots in aluminium diameter 13 cm
for fresh herbs

DOMO-spice jar holder NSMGDH8 157

lacquered natural oak
15 cm long
with 8 jars

Material and colour styles

AE = Anodised aluminium
405 stainless steel 417 steel black

1/2022 72.07
1/2022
Wall claddings

Wall claddings 73. 01

Wall claddings in front finish 73. 01-02

Wall claddings
73.

1/2022 73.
 Wall claddings

73.

73.
1/2022
 Surface style
Wall claddings Descriptions / colours see surround accessories chapter 11.

Worktop decors
AL

Neutral
FF FB
K PF FS MC
Type sketch Description/Planning Type Height KH KG VM ME KM FG MF H L
Wall cladding per metre
with vertical grain direction charge per started 10 cm
1.6 cm thick up to
visible edge allround WVSW190 190 133 155 238 255 646 570 814 686 -
Minimum height 150 cm WVSW230 230 161 188 288 309 782 690 985 830 -
Max. width 120 cm WVSW270 270 189 221 337 362 918 810 1156 974 -

Minimum charged 0.5 metres.

Can be equipped with WB LE.. wall panel with
LED-lighting, see page 72.03.
Grain direction
Fittings with shelves as well as socket cut-outs
vertical
require processing on site.

Hanging fixing for per piece

wall cladding WVAUFH 65
1 aluminium hanging profile set
for concealed suspension of
wall cladding
Length 250 cm (for fitting on site)

The distance between two suspension profiles at the height

must not be greater than 60 cm.
Please observe a measurement compensation of 0.5 cm for
corner connections.
A gap of 1.5 cm to the top is necessary for suspending.

Price group
Wall claddings in front finish

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Height C1 C2 C3 C4 C5 C6 C7 C8
Wall cladding in front finish per metre
Texture direction as front charge per started 10 cm
Max. width 120 cm up to
Minimum height 150 cm WVFSW190 190 154 209 512 870 1009 1091 1119 1169
WVFSW230 230 187 253 618 1052 1219 1314 1340 1396
Minimum charged 0.5 metres. WVFSW270 270 219 298 726 1233 1429 1538 1560 1621
Can be equipped with WB LE.. wall panel with
LED-lighting, see page 72.03. Not available in BOSSA-C, IOS-C, IOS-M-C, VALAIS-C
Fittings with shelves as well as socket cut-outs
require processing on site.
For installation of the suspension fitting WV AUFH
can be used.

Wall cladding per metre

BOSSA programme charge per started 10 cm
With vertical embossed lines up to
Max. width 119.5 cm WVFSW190L 190 - - - - - - 1137 -
WVFSW230L 230 - - - - - - 1365 -
Minimum charged 0.5 metres. WVFSW270L 270 - - - - - - 1601 -
Maximum order sizes see page 71.14.
Available in BOSSA-C
To ensure a continuous line grid and a matching edge
end, the panels should be set with a 0.5 cm joint.
Therefore, please order either the wall cladding like front
width (e.g. 60 cm door width = final dimension 59.5 cm)
or shortened in 2.5 cm steps.
Can be equipped with WB LE.. wall panel with
LED-lighting, see page 72.03.
Fittings with shelves as well as socket cut-outs
require processing on site.
Please note indentations due to groove embossing.
Niche system DOMO not possible.
For installation of the suspension fitting WV AUFH
can be used.

1/2022 73.01
 Price group
Wall claddings in front finish

Neutral
A1 A2 A3 A4 A5 A6 A7
Type sketch Description/Planning Type Height C1 C2 C3 C4 C5 C6 C7 C8
Wall cladding outer corner per piece
BOSSA programme WVFSWAE190L 190 - - - - - - 605 -
Mitred glued with vertical embossed lines WVFSWAE230L 230 - - - - - - 724 -
Leg measurements 14.5 cm x 14.5 cm WVFSWAE270L 270 - - - - - - 843 -
Available in BOSSA-C
For transitions at outer corners in connection with
BOSSA wall cladding.

Front division ANFT 81

one front horizontally divided

For non-changeable programmes the division

is only in the height grid possible.
If different programmes are used, we will charge
the next higher price group for the cupboard!
Please inquire the technical feasibility!

73.02 1/2022
Worktops

Laminate 80. Chapter

Compact material 81. Chapter

Natural stone 82. Chapter

Glass 83. Chapter

Solid wood 84. Chapter

Porcelain ceramic 85. Chapter

Worktops
8.

1/2022 8.
 Worktops
Planning notes for up to 2 cm thick worktops in
Laminate / Compact material / Quartz material / Solid surface

Worktops less than 2 cm thickness need to be supported by metal frames for the following cupboards:
- cupboards from 80 cm width
- hob units ATH .. / CTH ..
- cupboards with hob above

Sink base units have a fixed blender (not removable).

The reinforcement measures are included the worktop price.
Please note: if thin worktops are being used on site, we recommend planning appropriate cupboard strengthening.
Please take the chargeable order processing types from chapter 14 / 15.

Rinsing
If built-in sinks are being used then the fixing technique below is necessary.

For laminate and compact material sinks we recommend a built-under installation.

The sink fixed to the support gives the narrow bridges of the worktop the necessary stability and makes it installation friendly.

Dishwasher
If a dishwasher is planned in a corner then a W2 support panel is essential.

Cupboards with hobs above

The height of hobs underneath the worktop must be taken into consideration. In order to have the necessary space for drawers,
preparation can be made at the factory at extra charge, see page 20.05 / 22.06 / 24.05 / 26.05.

ATH .. / CTH .. cupboards have front blender above.

Exceptions!
Cupboards which cannot have worktops less than 2 cm thick:
- cupboards with 2 adjoining drawers: AT 80 .. up to AT 120 .. SG
- carousel cupboards: ATE 82 .. K / ATE 92 .. K / CTE 82 .. K / CTE 92 .. K
- Hob units more than 60 cm wide with appliance ventilation at the front, i.e. for induction hobs.

Please note:
Cupboard widths alterations from 80 cm are not possible!
From cupboard width 80 cm no ASA and spice jars possible in the upper drawer.
Worktops

8.

8. 1/2022
Laminated worktops

Laminates
80.

Decors L 80. 01-03

Recommended worktop decors 80. 04-05

Edge types 80. 06

Decors KM 80. 07

Order processing examples / Planning tips 80. 08-10

Laminated worktops - Decors L 80. 11-12

Laminated worktops - Fenix® Decors KM 80. 13

Processing (extra charge) 80. 14-16

Accessories 80. 17-19

Support bracket U-shape 80. 20

1/2022 80.
 Planning tips cooking / rinsing
Laminates

Minimum distance for fitted worktop elements

80.
G
Minimum bridge widths
for all worktop thicknesses F
B B
E

D C

A A
Clamp fittings

Minimum bridge widths B B

for sink installation in the corner
C

H A
No Clamp fittings
clamp fittings

max. 10

Installation
from above synthetic resin frame flush
Minimum bridge width for * cut-out raw cut-out grooved underneath
A Cut-out to front edge 5 cm 5,5 cm 5 cm

B Cut-out to rear edge 4 cm 4 cm 4 cm

C Cut-out to side edge 4 cm 10 cm 10 cm

D Cut-out to cut-out 4 cm 8 cm 10 cm

E Drill hole to cut-out 3 cm 3 cm 3 cm

* this value represents the smallest technically possible F Drill hole to edge 3 cm 3 cm 3 cm
bridge width, depending on the worktop material. Please
also take into consideration the worktop overhang, G Drill hole to drill hole 3 cm 3 cm 3 cm
possible reinforcing strips to the underside of thin tops
H Cut-out to front edge 7,5 cm 7,5 cm 7,5 cm
and the construction of the cupboard.

Special sink installations 4 Coating Built-under sink installation

4
Adhesion
Built-under sinks may be installed in laminate
Sink worktops.
The mountable stainless steel and artificial stone sinks
can be found in chapter 92.
Please indicate the desired sink position exactly in you
order.
All built-under sinks are installed waterproof in an
elaborate procedure.
Cast resin bed
Worktop

5a Silicone 6 Silicone Flush mounted sink installation

5a
Coating Coating
For all worktop thicknesses.
For on-site installation of flush mounted hobs in lami-
nated worktops.

Cut-out with resin frame

Stainless steel sink 6
Ceramic /
Artificial stone For worktop thickness 1,7 / 1,8 cm.
Cast resin sink
For on site installation of surface-flush ceramic and
Cast resin artificial stone sinks in laminate worktops.
Worktop Worktop

80. 1/2022
Laminated worktops
Decors L

K
Laminate = K

K 032 magnolia K 100 arctic K 103 merino

K 120 frosty white K 130 mohair K 134 olive grey

K 136 sand grey K 138 fossil grey K 152 kiruna

Please note:
All decors show differing zones of de-
cor and colour in their structural direc-
tion which enhance their liveliness. The
stone design is a reproduction of the
natural stone and has been printed in
an elaborate process with selected high
quality colours. The design even shows
the light-, colour- and structural nu-
ances contained in the natural materi-
al. These natural- and colour differenc- K 177 trentino porphyr K 201 keraton K 202 liton
es giving the design its special appeal
may, under certain circumstances show
up clearly at the joint of two worktops
and are unavoidable and therefore do
not represent a faulty manufacture of
the natural stone reproduction. They
merely emphasise the individual, natu-
ral character of the worktop. Produc-
tion methods designed to enhance the
natural quality of the material prevent
continual colour and grain direction at K 204 carboton K 205 neroton K 210 marmobianco
worktops joints.
For technical reasons colour- and tex-
tural variations can occur on additions
to existing worktops.

K 211 marmonero K 273 platinum K 282 alpine grey

1/2022 80.01
Laminated worktops
Decors L

K
Laminate = K

K 453 ouro preto K 456 oxide brown K 458 oxide grey beige

K 481 dark concrete

Please note:
All decors show differing zones of de-
cor and colour in their structural direc-
tion which enhance their liveliness. The
stone design is a reproduction of the
natural stone and has been printed in
an elaborate process with selected high
quality colours. The design even shows
the light-, colour- and structural nu-
ances contained in the natural materi-
al. These natural- and colour differenc-
es giving the design its special appeal
may, under certain circumstances show
up clearly at the joint of two worktops
and are unavoidable and therefore do
not represent a faulty manufacture of
the natural stone reproduction. They
merely emphasise the individual, natu-
ral character of the worktop. Produc-
tion methods designed to enhance the
natural quality of the material prevent
continual colour and grain direction at
worktops joints.
For technical reasons colour- and tex-
tural variations can occur on additions
to existing worktops.

80.02 1/2022
Laminated worktops
Decors L

KH
Laminate wood decor = KH
* without sawn appearance

KH 227 japanese pine KH 228 weather oak KH 229 fjord oak

KH 233 antique oak KH 234 highland oak KH 239 karst oak

KH 240 walnut le midi KH 241 black walnut KH 345 mountain robinia

Please note:
All decors show differing zones of de-
cor and colour in their structural direc-
tion which enhance their liveliness. The
stone design is a reproduction of the
natural stone and has been printed in
an elaborate process with selected high
quality colours. The design even shows
the light-, colour- and structural nu-
ances contained in the natural materi-
al. These natural- and colour differenc- KH 368 tennessee walnut
es giving the design its special appeal
may, under certain circumstances show
up clearly at the joint of two worktops
and are unavoidable and therefore do
not represent a faulty manufacture of
the natural stone reproduction. They
merely emphasise the individual, natu-
ral character of the worktop. Produc-
tion methods designed to enhance the
natural quality of the material prevent
continual colour and grain direction at
worktops joints.
For technical reasons colour- and tex-
tural variations can occur on additions
to existing worktops.

1/2022 80.03
Laminated worktops
Recommendation for the choice of matching front colour décor reproduction

Recommended
worktop
decors

152

177

201

202

204

205

210

211

453

456

458

481
Front colours
032 magnolia • • • •
070 citrine • • • • • •
071 opal • • • •
093 copper shadow • •
094 lava shadow • • • • •
100 arctic • • • • • • •
103 merino • • • • • • • •
120 frosty white • • • • •
123 chrome brushed • • • • • •
124 cobalt brushed •
130 mohair • • • • • • • • •
134 olive grey • • • • • • • • •
136 sand grey • • • • • •
137 taupe grey • • • • • • • • •
138 fossil grey • • • •
139 lava • • •
148 cotta • • •
149 fossena • • • •
152 kiruna •
167 oxid silver • • • • •
168 oxid bronze • • • • •
169 oxid titan • • • • •
188 dakar • •
189 manhattan • • •
191 le havre • •
192 brasilia • •
201 keraton • • •
202 liton • • • • • • •
205 neroton • •
210 marmobianco • • • • • •
211 marmonero • • • •
218 elm natural • • • • • • • •
221 textured oak abruzzo • • •
222 textured natural oak • • • • • • • •
223 textured oak barrique • • • • • •
227 japanese pine • • • • • • • • •
228 weather oak • • • •
229 fjord oak • • • • • •
233 antique oak • • • • •
234 highland oak • • • • • • •
239 karst oak • • • • • •
240 walnut le midi • • • • • • •
241 black walnut • • • • • •
242 virginia oak • • • •
262 wild oak alpine • • • • • • •
263 wild oak copper • • • • • • •
264 wild oak abruzzo • •
266 wild oak barrique • • • •
267 wild oak marsh • • •
270 graphite grey • • • •
273 platinum • • • • • • •
277 black • • • •
279 midnight blue • • • • • • •
282 alpine grey • • • •
284 carbon grey • • • •
286 black slate • • • •
297 corten • • • • •
298 ferro • • • • •
309 bergamo elm • • • •
310 ash madeira • • • • • • •
312 walnut • • • • • • •
313 textured oak copper • • • • • •
316 textured oak marsh • • •
335 alpine natural oak • • • • • • •
345 mountain robinia • •
350 alpine oak lined • • • • •
352 walnut lined • • • • •
360 maraval chestnut • • • •
368 tennessee walnut • • •
80.04 1/2022
Laminated worktops
Recommendation for the choice of matching front colour wood decors

Recommended
worktop
decors

227

228

229

233

234

239

240

241

345

368
Front colours
032 magnolia • • • • • • •
070 citrine • • •
071 opal • • • •
093 copper shadow
094 lava shadow • • • • • • • •
100 arctic • • • • • •
103 merino • • • • •
120 frosty white • • • • • •
123 chrome brushed • • •
124 cobalt brushed • • • •
130 mohair • • • •
134 olive grey • • • • • • • •
136 sand grey • •
137 taupe grey • • • • • • •
138 fossil grey • • • •
139 lava • • •
148 cotta • • • • •
149 fossena • • • • • • •
152 kiruna • • • • • • • •
167 oxid silver • • • • • • • • • •
168 oxid bronze • •
169 oxid titan • • • •
188 dakar • • • •
189 manhattan • • • •
191 le havre • •
192 brasilia • • •
201 keraton • • • • •
202 liton • • • • • •
205 neroton • • • • •
210 marmobianco • • • • • •
211 marmonero • • • • • • •
218 elm natural
221 textured oak abruzzo
222 textured natural oak
223 textured oak barrique •
227 japanese pine •
228 weather oak •
229 fjord oak •
233 antique oak •
234 highland oak •
239 karst oak •
240 walnut le midi •
241 black walnut •
242 virginia oak • • • • •
262 wild oak alpine
263 wild oak copper
264 wild oak abruzzo
266 wild oak barrique •
267 wild oak marsh
270 graphite grey • • • •
273 platinum • • • • •
277 black • • • • •
279 midnight blue • • •
282 alpine grey • • • • •
284 carbon grey • • • •
286 black slate • • • • • •
297 corten • •
298 ferro • • •
309 bergamo elm
310 ash madeira
312 walnut
313 textured oak copper
316 textured oak marsh
335 alpine natural oak
345 mountain robinia •
350 alpine oak lined
352 walnut lined
360 maraval chestnut •
368 tennessee walnut •
1/2022 80.05
Laminated worktops
Edge styles RR / KD / MGV

DOUBLE ROUND EDGE

Top thickness 4 cm
Combinable with all laminate facing L of pages
80.01-03.

Not available in:

K 100 arctic KH 227 japanese pine
K 103 merino KH 234 higland oak
K 130 mohair KH 240 walnut le midi
AP4RR edge same decor
K 136 sand grey KH 241 black walnut
K 210 marmobianco KH 345 mountain robinia
K 211 marmonero
K 282 alpine grey
K 453 ouro preto

LAMINATE THICK EDGE

Top thickness 1,7 cm / 3 cm / 4 cm / 6 cm
Combinable with all laminate facing L of pages
80.01-03.

AP2KD (Top thickness 1,7 cm) Edge same decor AP2KD (Top thickness 1,7 cm) Contrasting edge
AP3KD (Top thickness 3 cm) AP3KD (Top thickness 3 cm)
AP4KD (Top thickness 4 cm) AP4KD (Top thickness 4 cm)
AP6KD (Top thickness 6 cm) AP6KD (Top thickness 6 cm)

AP2KD (Top thickness 1,7 cm) VS 405 stainless steel AP3KD (Top thickness 3 cm) KG 407 alu
AP3KD (Top thickness 3 cm) AP4KD (Top thickness 4 cm)
AP4KD (Top thickness 4 cm) AP6KD (Top thickness 6 cm)
AP6KD (Top thickness 6 cm)

AP3KD (Top thickness 3 cm) KH 427 multiplex

AP4KD (Top thickness 4 cm)
AP6KD (Top thickness 6 cm)

METAL EDGE (EDGE APPLIED)

Top thickness 1,7 cm / 3 cm / 4 cm / 6 cm

Combinable with all laminate facing L of pages
80.01-03.

AP2MGV (Top thickness 1,7 cm) A 422 stainless steel colour

AP3MGV (Top thickness 3 cm)
AP4MGV (Top thickness 4 cm)
AP6MGV (Top thickness 6 cm)

80.06 1/2022
Laminated worktops
Fenix® Decors KM

KM
Laminate mat = KM

Low light reflectivity Soft touch Anti-fingerprint Thermal healing

KM 100 arctic KM 103 merino

Worktops with laminate coating in style KM are char-

acterised by super matt surfaces in original
material. Special laminates with extremely high dura-
bility are used. They also feature an anti-fingerprint
effect. All visible narrow surfaces have 1.5 mm
thick laminate thick edge. The edges are cham-
fered towards the surface.
In order to maintain the elegance of this super matt
KM 120 frosty white KM 130 mohair
surface, regular cleaning is necessary. Stubborn dirt
and signs of usage can easily be removed with a dirt
eraser sponge. Items with rough undersides (e.g. un-
glazed ceramic) must be very carefully moved on the
surface.
See also the special advice in the care and
maintenance instructions manual.

KM 134 olive grey KM 137 taupe grey

KM 138 fossil grey KM 279 midnight blue

KM 284 carbon grey KM 286 black slate

LAMINATE THICK EDGE

Top thickness 1,8 cm / 3 cm / 4 cm / 6 cm
Combinable with all laminate facing KM.

AP2LK (Top thickness 1,8 cm) edge same decor

AP3LK (Top thickness 3 cm)
AP4LK (Top thickness 4 cm)
AP6LK (Top thickness 6 cm)

1/2022 80.07
Laminated worktops
Calculation examples

5 worktop formats are available for dimensional choice.

AP ... 60 60
70
AK... 90
120
AP ... 70
128
AP ... 90

AP ... 120

AP ... 128
AK...

The front edge is included in the price per metre for a straight style in all 5 worktop
formats. Rear edges will be calculated per 10 cm edge length according to edge style
(AK..) or are available in certain forms as independent types. Side edges are calculated
per 10 cm depth (AK..). The calculation measurement is based on the greatest depth
of the worktop.

Additional edge charges become relevant with cutouts or chamfers depending on

edge type. Please note the calculation examples for this on pages 80.09.

Worktops with cutouts AUS.. or chamfers AS.. are calculated as for full formats for
edge calculations. The front edges are included in the worktop price, side edges are
calculated according to the largest worktop depth (AK.. per 10 cm).
Exceptions: Additional costs arise for inset pieces with cutouts on worktops with edge
type RR. In such cases the cutout-areas to be edged are charged as edge length.
For this calculation please note the calculation example on page 80.09.

For side edge calculation on external one- or two-sided chamfers AS.. the worktop
depth is used.

Free cutouts with edges AUS.. (please state relevant measurements and angles) do
not need a separate edge calculation for all worktop edge types, except for the edge
type RR. In these cases the relevant inset pieces are charged, according to the lengths
of the cutout area.
Exceptions: Cutouts with edges without side edging will be calculated according to the
actual edge length of the cutout area.

External curves ARF.. are not possible with edge form RR. The total worktop depth
is relevant for side edge calculation.

80.08 1/2022
Laminated worktops
Calculation examples

Example: Type Size/Quantity Notes

1 Worktop AP ... 70 250 x 65 cm

+ Chamfer AS ... 1 number
+ Corner connection 90° EV ... 90 1 number
+ Worktop edge AK ... 45 cm Calculated to full 10 cm

2 Worktop AP ... 60 200 x 60 cm

+ Corner connection EV ... 90 1 number
+ Built-under sink installation SPU U 1 number Note minimum bridge
+ Tap hole waterproof AM BO S 1 number
+ Worktop edge AK ... 60 cm

3 Worktop AP ... 120 180 x 100 cm

+ Cut-out AUS KKF 1 number Note minimum bridge
+ Cutout AUK ... 1 number
+ Worktop edge AK ... 3 number

min. 3 cm

2 min. 3 cm
AM BO S
EV ... 90

AK ...
AP ... 60 60 cm
SPU U

min. 5 cm

200 cm

1
250 cm

AP ... 70 min. 5 cm

AUS KKF
AK ...

AK ...

100 cm

3
AP ... 120
AUK ...

AK ...
...
AS

180 cm
AK ...

45 cm
65 cm

1/2022 80.09
Laminated worktops
Worktop edges / Available shapes

Worktop standard overhang 4,0 cm 2,3 cm

To the carcase front edge 4 cm.
AP AP
At the end, with free-ending floor unit runs at least 2 cm.

Worktop overhang “flush”

Design orientated plans require an almost flush overhang. front front
Overhang to carcase front edge 2,3 cm.
0,2 cm 0,2 cm
At the end on free-ending floor unit runs 0,2 cm.
Front thickness 1,8 - 2,1 cm Front thickness 1,8 - 2,1 cm

standard „flush“

Worktop side edges

Free ending worktops are supplied with following side edges to choice:
a) Same type as front edge
- square edged with slight curve KD and MGV
- edges with chamfer KD
- square edged as single inset piece RR
- with chamfer from 3 cm KD and MGV
- with chamfer and inset piece RR.
Plan a side worktop overhang of 3 cm with chamfer.

- with external curve KD and MGV.

Please note minimum radii, worktops with edge type RR cannot be rounded.

b) Smooth laminate edge in worktop decor

Available for all worktop forms.

Tall unit connection

KD and MGV edges are of the same style as the front edge.
For edge form RR smooth side edges are used.

KD, MGV RR

90 degree corner connections

Corner connections are supplied with a specific tongue and groove connection and
bolt fittings, depending on the type of edge. The installation must be carried out ac-
cording to enclosed fitting instructions.
Corner connections with varying angles are possible.

Cutouts
Cutouts are possible in all desired shapes with consideration of the minimum measure-
ment for chamfers and inner/ exterior radii.
Cutouts on edge form RR are only possible in straight form. Rounded cutouts are pos-
sible only without or with another edge type.

80.10 1/2022
Laminated worktops - Decors L
Top thickness 1.7 cm
with laminate thick edge / metal edge

Type sketch Description Planning Type Depth

Worktop Worktop decors and edge colours per metre

one-sided laminate faced see contents page 80.01 - 06, charge per started 10 cm
edges applied necessary to state colour. up to
Laminate thick edge KD (1.5 mm thick) AP2KD60 60 201
AP2KD70 70 247
Long edge front (Exception KH 234 highland oak, KH 241 AP2KD90 90 274
all decors max. length 510 cm, black walnut, K 273 platinum, KH 345 AP2KD120 120 351
for depths of more than 90 cm mountain robinia and K 453 ouro preto AP2KD128 128 386
max. length only 420 cm generally max. length only 400 cm)

Worktop Worktop decors and edge colours per metre

one-sided laminate faced see contents page 80.01 - 06, charge per started 10 cm
edges applied necessary to state colour. up to
Metal edge MGV (1.5 mm thick) AP2MGV60 60 254
AP2MGV70 70 293
Long edge front (Exception KH 234 highland oak, KH 241 AP2MGV90 90 312
all decors max. length 510 cm, black walnut, K 273 platinum, KH 345 AP2MGV120 120 387
for depths of more than 90 cm mountain robinia and K 453 ouro preto AP2MGV128 128 426
max. length only 420 cm generally max. length only 400 cm)

Laminated worktops - Decors L

Top thickness 3 cm
with laminate thick edge / metal edge

Type sketch Description Planning Type Depth

Worktop Worktop decors and edge colours per metre

one-sided laminate faced see contents page 80.01 - 06, charge per started 10 cm
edges applied necessary to state colour. up to
Laminate thick edge KD (1.5 mm thick) AP3KD60 60 162
AP3KD70 70 205
Long edge front (Exception KH 234 highland oak, KH 241 AP3KD90 90 235
all decors max. length 510 cm, black walnut, K 273 platinum, KH 345 AP3KD120 120 319
for depths of more than 90 cm mountain robinia and K 453 ouro preto AP3KD128 128 350
max. length only 420 cm generally max. length only 400 cm)

Worktop Worktop decors and edge colours per metre

one-sided laminate faced see contents page 80.01 - 06, charge per started 10 cm
edges applied necessary to state colour. up to
Metal edge MGV (1.5 mm thick) AP3MGV60 60 181
AP3MGV70 70 223
Long edge front (Exception KH 234 highland oak, KH 241 AP3MGV90 90 250
all decors max. length 510 cm, black walnut, K 273 platinum, KH 345 AP3MGV120 120 322
for depths of more than 90 cm mountain robinia and K 453 ouro preto AP3MGV128 128 354
max. length only 420 cm generally max. length only 400 cm)

1/2022 80.11
Laminated worktops - Decors L
Top thickness 4 cm
with double round edge / laminate thick edge / metal edge

Type sketch Description Planning Type Depth

Worktop Worktop decors and edge colours per metre

one-sided laminate faced see contents page 80.01 - 06, charge per started 10 cm
double round edge RR (radius 4 mm) necessary to state colour. up to
AP4RR60 60 110
Long edge front K 100 arctic, K 103 merino, K 130 mohair, AP4RR70 70 146
all decors max. length 510 cm, K 136 sand grey, K 210 marmobianco, AP4RR90 90 180
for depths of more than 90 cm K 211 marmonero, KH 227 japanese pine, AP4RR120 120 252
max. length only 420 cm KH 234 highland oak, KH 240 walnut le midi,
KH 241 black walnut, K 282 alpine grey,
KH 345 mountain robinia and K 453 ouro preto
not available!

Worktop Worktop decors and edge colours per metre

one-sided laminate faced see contents page 80.01 - 06, charge per started 10 cm
edges applied necessary to state colour. up to
Laminate thick edge KD (1.5 mm thick) AP4KD60 60 142
AP4KD70 70 179
Long edge front (Exception KH 234 highland oak, KH 241 AP4KD90 90 205
all decors max. length 510 cm, black walnut, K 273 platinum, KH 345 AP4KD120 120 278
for depths of more than 90 cm mountain robinia and K 453 ouro preto AP4KD128 128 306
max. length only 420 cm generally max. length only 400 cm)

Worktop Worktop decors and edge colours per metre

one-sided laminate faced see contents page 80.01 - 06, charge per started 10 cm
edges applied necessary to state colour. up to
Metal edge MGV (1.5 mm thick) AP4MGV60 60 158
AP4MGV70 70 195
Long edge front (Exception KH 234 highland oak, KH 241 AP4MGV90 90 218
all decors max. length 510 cm, black walnut, K 273 platinum, KH 345 AP4MGV120 120 292
for depths of more than 90 cm mountain robinia and K 453 ouro preto AP4MGV128 128 323
max. length only 420 cm generally max. length only 400 cm)

Laminated worktops - Decors L

Top thickness 6 cm
with laminate thick edge / metal edge

Type sketch Description Planning Type Depth

Worktop Worktop decors and edge colours per metre

one-sided laminate faced see contents page 80.01 - 06, charge per started 10 cm
edges applied necessary to state colour. up to
Laminate thick edge KD (1.5 mm thick) AP6KD60 60 183
AP6KD70 70 221
Long edge front (Exception KH 234 highland oak, KH 241 AP6KD90 90 241
all decors max. length 510 cm, black walnut, K 273 platinum, KH 345 AP6KD120 120 323
for depths of more than 90 cm mountain robinia and K 453 ouro preto AP6KD128 128 356
max. length only 420 cm generally max. length only 400 cm)

Worktop Worktop decors and edge colours per metre

one-sided laminate faced see contents page 80.01 - 06, charge per started 10 cm
edges applied necessary to state colour. up to
Metal edge MGV (1.5 mm thick) AP6MGV60 60 272
AP6MGV70 70 313
Long edge front (Exception KH 234 highland oak, KH 241 AP6MGV90 90 334
all decors max. length 510 cm, black walnut, K 273 platinum, KH 345 AP6MGV120 120 409
for depths of more than 90 cm mountain robinia and K 453 ouro preto AP6MGV128 128 450
max. length only 420 cm generally max. length only 400 cm)

80.12 1/2022
Laminated worktops - Fenix® Decors KM
Top thickness 1.8 cm, 3 cm, 4 cm and 6 cm
with laminate thick edge

Type sketch Description Planning Type Depth

Worktop Worktop decors and edge colours per metre

thickness 1.8 cm see contents page 80.07, charge per started 10 cm
one-sided laminate faced necessary to state colour. up to
edges applied AP2LK60 60 244
Laminate thick edge KD (1.5 mm thick) AP2LK70 70 299
AP2LK90 90 383
Long edge front AP2LK120 120 522
all decors max. length 405 cm AP2LK128 128 568

Worktop Worktop decors and edge colours per metre

thickness 3 cm see contents page 80.07, charge per started 10 cm
one-sided laminate faced necessary to state colour. up to
edges applied AP3LK60 60 209
Laminate thick edge KD (1.5 mm thick) AP3LK70 70 264
AP3LK90 90 348
Long edge front AP3LK120 120 487
all decors max. length 405 cm AP3LK128 128 533

Worktop Worktop decors and edge colours per metre

thickness 4 cm see contents page 80.07, charge per started 10 cm
one-sided laminate faced necessary to state colour. up to
edges applied AP4LK60 60 191
Laminate thick edge KD (1.5 mm thick) AP4LK70 70 234
AP4LK90 90 296
Long edge front AP4LK120 120 400
all decors max. length 405 cm AP4LK128 128 435

Worktop Worktop decors and edge colours per metre

thickness 6 cm see contents page 80.07, charge per started 10 cm
one-sided laminate faced necessary to state colour. AP6LK60 60 278
edges applied
Laminate thick edge KD (1.5 mm thick) AP6LK70 70 342
AP6LK90 90 435
Long edge front AP6LK120 120 591
all decors max. length 405 cm AP6LK128 128 643

1/2022 80.13
Processing (extra charge)

Laminate thick edge

Double round edge

Laminate edge

without edge
Metal edge
Type sketch Description/Planning Type RR KD MGV SK
Worktop edge per 10 cm
as side edge or 1.7 cm / 1.8 cm thick
additional edge AK2 - 3 10 2 -

Edges are calculated according 3 cm thick

to the greatest worktop depth. AK3 - 3 7 2 -
Additional edges relate to the
relevant worktop area. 4 cm thick
AK4 13 3 7 2 -

6 cm thick
AK6 - 6 12 4 -

Chamfer 1.7 cm / 1.8 cm thick

with free angle AS2 - 79 116 - 35

To sketch, necessary to state angle. 3 cm thick

Either with or without edge. AS3 - 79 112 - 35
Smallest chamfer 3/3 cm,
with RR edges 5/5 cm. 4 cm thick
AS4 112 79 112 - 35

6 cm thick
AS6 - 104 127 - 35

External radii 1.7 cm / 1.8 cm thick

free radii up to quarter circle ARF2 - 91 116 - 35
max. 100 cm radius
3 cm thick
To sketch, necessary to state radius. ARF3 - 91 112 - 35
Either with or without edge.
Smallest radii: 4 cm thick
KD = 2.5 cm (except VS 405 / KG 407 / KH 427 ARF4 - 91 112 - 35
minimum radius = 6 cm)
MGV = 25 cm 6 cm thick
without edge = 1.6 cm ARF6 - 104 127 - 35

Planning tips worktop edges

68
80
Calculation length 68 cm = 70 cm 90

60
Calculation lengths
side edge 80 cm RR edge (greatest worktop length)
Cutout edging 90 cm (relevant to worktop area) 60 60

Cutout 1.7 cm / 1.8 cm thick

with free angle AUKF2 - 148 168 - 41

To sketch, necessary to state angle. 3 cm thick

Either with or without edge. AUKF3 - 148 168 - 41
RR edge calculation according
to layout instruction. 4 cm thick
AUKF4 112 148 168 - 41

6 cm thick
AUKF6 - 194 221 - 41

Cutout rounded 1.7 cm / 1.8 cm thick

free radii up to quarter circle AUKR2 - 148 168 - 41
max. 100 cm radius
3 cm thick
To sketch, necessary to state radius. AUKR3 - 148 168 - 41
or Either with or without edge.
Smallest radii: 4 cm thick
KD = 4.5 cm (except VS 405 / KG 407 / KH 427 AUKR4 - 148 168 - 41
minimum radius = 6 cm)
MGV = 25 cm 6 cm thick
without edge = 1.6 cm AUKR6 - 194 221 - 41

Planning tips

Calculation according for cutouts at RR edges.

RR edges are calculated according to the overall length of the cutout area.
Calculation example: cutout area 120 cm x AK4 RR per 10 cm

Cutout area 120 cm 120

80.14 1/2022
Processing (extra charge)

Type sketch Description Planning Type

Cutout Supplied according to drawing AUS 47

not edged and appliance specification. 1
for sinks and hobs For transport protection with cut-out core.
rectangular or round shape

Coating Built-under sink installation Built-under sinks may be installed in laminate SPUU 280
incl. cut-out worktops. 4
Adhesion
The mountable stainless steel, Silgranite and
Sink
Fragranite sinks can be found in the chapter 92.
Please indicate the desired sink position exactly
in you order.
All built-under sinks are installed waterproof in
an elaborate procedure.

Cast resin bed

Worktop

Silicone Cutout with resin frame Only to statement of sink type. AUSKSF 275
for sinks Ceramic and artificial stone sinks see chapter 92. 6
Coating
with worktops 1.7 / 1.8 / 3 / 4 and Please plan a minimum bridge width of 9 cm when
6 cm thickness using a worktop thickness of 1,7 / 1,8 / 3 cm in
For on site installation of surface-flush combination with a ceramic sink.
ceramic and artificial stone sinks in
laminate worktops.
Minimum radius 1 cm

Ceramic /
Artificial stone
sink
Cast resin
Worktop

Silicone Cutout with synthetic resin frame Please indicate the desired sink AUSKFS 275
for surface flush sinks position exactly in you order. 5a
Coating
with worktops 1.7 / 1.8 / 3 / 4 and
6 cm thickness
For on-site installation of stainless steel sinks
with flat edge from our laminated worktops
programme.

Stainless steel
sink

Cast resin

Worktop

Silicone Cutout with resin frame Only to sketch and make of hob. AUSKKF 275
for hobs Mounting option subject to checking at factory.
Coating
with worktops 1.7 / 1.8 / 3 / 4 and Special instructions:
6 cm thickness In order to avoid edge damage to the laminate, it is
For on site installation of essential to ensure that the hob is not installed lower
surface-flush hobs in than the worktop surface.
laminate worktops. Hot pots and pans, protruding from the hob
Minimum radius 0.4 cm edge, can cause damage (burns) to the laminate!
In these cases we assume no liability!

Hob

Cast resin

Worktop

Corner connection 90° Extra charge for corner and length per top part
with connecting bolt connections. 1.7 cm / 1.8 cm thick
tongue and groove connection Note for calculation: EV290 31
total price = 2x EV ..
3 cm thick
EV390 24

4 cm thick
EV490 24

6 cm thick
EV690 31

1/2022 80.15
Processing (extra charge)

Type sketch Description Planning Type

Corner connection 135° Extra charge for corner connections. per top part
with connecting bolt Note for calculation: 1.7 cm / 1.8 cm thick
tongue and groove connection total price = 2x EV .. EV2135 31

3 cm thick
EV3135 24

4 cm thick
EV4135 24

6 cm thick
EV6135 31

Special corner connection 135° Extra charge for corner connection per top part
with connecting bolt 135° with staggered worktop joint. 1.7 cm / 1.8 cm thick
tongue and groove connection Recommended for cutouts close to EVS2 41
work-top joint, e.g. with flush sinks.
Note for calculation: 3 cm thick
total price = 2x EV .. EVS3 34

4 cm thick
EVS4 34

6 cm thick
EVS6 41

Corner connection Worktop calculation: per top part

for any angle per top longest length. 1.7 cm / 1.8 cm thick
with connecting bolt With metre joint only! EVF2 41
tongue and groove connection Note for calculation:
total price = 2x EV .. 3 cm thick
EVF3 34

4 cm thick
EVF4 34

6 cm thick
EVF6 41

Depth connection Format depth extension for work- STF 68

with connecting bolt tops of more than 120 and 128 cm.
tongue and groove connection Worktop calculation:
Smallest depth 10 cm size of basic top plus
the added piece + STF.

Underside counter balanced per metre

laminate, both sides same colour charge per started 10 cm
HBP60 48
HBP70 57
HBP90 74
HBP120 99
HBP128 108

Cutout Please state position (sketch). AUSBF 32

for socket element STE BF 2

Drill hole 10.2 cm diameter Please state position (sketch). per drilling
Ø 10,2 for socket element STE 10 3 and STEU 10 2 STBO10 33

Coating Tap hole waterproof Please state diameter. per drilling

Ø2-5 diameter 2 - 5 cm If standard position is not desired, sketch AMBOS 107
for laminate worktops from 1.7 cm thickness will be necessary.
Standard position: bowl in the middle, distance
from bowl edge to middle drill hole 5.5 cm

Cast resin
Worktop

80.16 1/2022
 Surface style
Accessories

Neutral
FS
Type sketch Description/Planning Type Length FF ME KM H VS L MG MS
Wall contour blender WPD12 125 - - - - 19 - - -
in 2 parts, height 3 cm WPD25 250 - - - - 31 - - -
basic profile with soft lipping WPD37 375 - - - - 49 - - -
405 stainless steel WPD50 500 - - - - 62 - - -

Accessory bag WPDZB 18

consisting of:
2 end caps left
2 end caps right
3 inner corners 90°
2 inner corners 135°
2 exterior corners

Wall contour blender WAN10 100 - - 17 - - 17 - -

in 2 parts, height 3 cm, depth 2.8 cm WAN20 200 - - 32 - - 32 - -
1 basic profile WAN40 400 - - 66 - - 66 - -
1 wall contour blender with soft lip and
insert with worktop decor

Please state colour.

Accessory bag WANZB 15

consisting of:
2 end caps left
2 end caps right
3 inner corners 90°
2 inner corners 135°
2 exterior corners

Wall contour blender WAV20 210 - - - - - - - 36

in aluminium WAV40 420 - - - - - - - 69
405 stainless steel colour
height 3.2 cm, depth 2.1 cm

Accessory bag WAVZB 15

consisting of:
2 end caps left
2 end caps right
2 inner corners 90°
2 exterior corners 270°

Material and colour styles

KM = Laminate matt L = Worktop decor MS = Metal satin finish

100 arctic 137 taupe grey 032 magnolia 227 japanese pine 405 stainless steel
103 merino 138 fossil grey 100 arctic 228 weather oak
120 frosty white 279 midnight blue 103 merino 229 fjord oak
130 mohair 284 carbon grey 120 frosty white 233 antique oak
134 olive grey 286 black slate 130 mohair 234 highland oak
134 olive grey 239 karst oak
VS = Metal foil satin finish smooth 136 sand grey 240 walnut le midi
405 stainless steel 138 fossil grey 241 black walnut
152 kiruna 273 platinum
177 trentino porphyr 282 alpine grey
201 keraton 345 mountain robinia
202 liton 368 tennessee walnut
204 carboton 453 ouro preto
205 neroton 456 oxide brown
210 marmobianco 458 oxide grey beige
211 marmonero 481 dark concrete

1/2022 80.17
 Surface style
Accessories

Neutral
FS
Type sketch Description/Planning Type Length FF ME KM H VS L MG MS
Bar support KWH - - - - - - - 41
Height 16 cm
405 stainless steel colour
16
22,6
16 /

25
For panelled-in raised bar back panel.
Distance of support bracket max. 60 cm.

Bar support KWE - - - - - - - 92

square 5 x 5 cm
height 22 cm
21 405 stainless steel colour

For reduced height bar tops.

22

Distance of support bracket max. 60 cm.

Bar support KHHE17 - - - - - - - 78

square 5 x 5 cm
height 17 cm
17

405 stainless steel colour

with screw fixing plate

For raised bar top set onto worktop.

Distance of support bracket max 60 cm.
For worktops to screw on.

Bar support KHH17 - - - - - - - 78

height 17 cm
405 stainless steel colour
17

with screw fixing plate

For raised bar top set onto worktop.

Distance of support bracket max 60 cm.
For worktops to screw on.

Bar support BSHE17 - - - - - - - 68

square 5 x 5 cm
height 17 cm
405 stainless steel
with screw fixing plate

Distance of bartop support max. 60 cm.

For screwing onto worktop.

Material and colour styles

MS = Metal satin finish

405 stainless steel

80.18 1/2022
 Surface style
Accessories

Neutral
FS
Type sketch Description/Planning Type Length FF ME KM H VS L MG MS
Support leg .
square 8 x 8 cm
with height adjustment

Height 69 cm SFE69MS - - - - - - - 97
Height 73 cm SFE73MS - - - - - - - 97
Height 82 cm SFE82MS - - - - - - - 113
Height 87 cm SFE87MS - - - - - - - 116
Height 90 cm SFE90MS - - - - - - - 119
Height 110 cm SFE110MS - - - - - - - 135

For other heights up to 110 cm,

please use the type SFE 110 MS
and state required height.

Support leg .
square 10 x 10 cm

Height 60 to 75 cm SFE1075 145 196 - 209 - - - -

Height 76 to 90 cm SFE1090 153 207 - 220 - - - -
Height 91 to 110 cm SFE10110 160 217 - 232 - - - -

Please state required height.

Plan height adjustment SFEH separately.

Support leg height adjustment SFEH 24

1 adjustment screw in foot

Adjustment + 2 cm

Support leg .
Ø 6 cm

Height 69 cm SFR69 53 68 - - - - 49 88
Height 73 cm SFR73 53 68 - - - - 49 88
Height 82 cm SFR82 64 84 - - - - 54 94
Height 87 cm SFR87 64 84 - - - - 54 94
Height 90 cm SFR90 68 90 - - - - 57 97
Height 110 cm SFR110 82 106 - - - - 65 108

Adjustment of legs is max. 3 cm,

this allows higher worktop height.
For other heights up to 110 cm,
please use the type SFR 110 ..
and state required height.

Material and colour styles

FF = Colour lacqu. finely textured FS = Colour lacquered super matt H = Wood veneer
032 magnolia 489 manhattan 032 magnolia 139 lava 079 ash midnight blue 316 textured oak marsh
100 arctic 491 le havre 100 arctic 273 platinum 082 ash alpine grey 360 maraval chestnut
103 merino 492 brasilia 103 merino 277 black 084 ash carbon grey 400 ash arctic
120 frosty white 497 corten 120 frosty white 279 midnight blue 085 ash basalt grey 403 ash merino
130 mohair 498 ferro 130 mohair 282 alpine grey 086 ash black slate 420 ash frosty white
134 olive grey 741 marès 134 olive grey 284 carbon grey 218 elm natural 430 ash mohair
136 sand grey 742 cordillera 136 sand grey 285 basalt grey 221 textured oak abruzzo 432 ash magnolia
137 taupe grey 744 nasca 137 taupe grey 286 black slate 222 textured natural oak 434 ash olive grey
138 fossil grey 745 iguazu 138 fossil grey RAL RAL/NCS-colours 223 textured oak barrique 435 alpine natural oak
139 lava 783 taj mahal sanded 262 wild oak alpine 436 ash sand grey
273 platinum 784 white fantasy sanded ME = Metallic lacquer 263 wild oak copper 437 ash taupe grey
277 black 785 nero san marcos satin. 467 oxid silver 770 citrine 264 wild oak abruzzo 438 ash fossil grey
279 midnight blue 786 steel gray satined 468 oxid bronze 771 opal 266 wild oak barrique 439 ash lava
282 alpine grey 787 nero assoluto waterjet 469 oxid titan 267 wild oak marsh 473 ash platinum
284 carbon grey 789 negresco satined 309 bergamo elm 750 alpine natural oak
285 basalt grey 790 breccia imperiale satin. 310 ash madeira 752 walnut
448 cotta 791 black musk waterjet 312 walnut RAES RAL-colours (ash)
449 fossena RAL RAL/NCS-colours 313 textured oak copper
488 dakar
MG = Metal gloss
302 chrome gloss

MS = Metal satin finish

405 stainless steel

1/2022 80.19
 Style
Support bracket U-shape

Neutral
Type sketch Description Planning Type FS MS

Support bracket U-shape Please state height and depth. SFU 564 631
with one-sided connection to The depth of the support bracket must
support profile TPH .. match the carcase depth.
and drill holes for worktop fixing The support bracket has 2 adjustable feet
Metal tube 6 x 2 cm with an adjustment variation of 1 cm.
Height up to 100 cm
Depth up to 120 cm

Support bracket U-shape Please state height and depth. SFU2 564 631
with connection on either side The depth of the support bracket must
to support profile TPH .. match the carcase depth.
and drill holes for worktop fixing The support bracket has 2 adjustable feet
Metal tube 6 x 2 cm with an adjustment variation of 1 cm.
Height up to 50 cm
Depth up to 120 cm

Batten for Length up to 200 cm TPH200 1044 -

support bracket SFU .. Length from 201 up to 250 cm TPH250 1182 -
3 metal bracket profiles with connection
to SFU .. or to cupboard/side panel Please state exact measurements.

Batten for Length up to 200 cm TPH2200 1121 -

support bracket SFU .. Length from 201 up to 250 cm TPH2250 1259 -
3 metal bracket profiles with connection
to SFU .. on both sides Please state exact measurements.

Material and colour styles

Support bracket SFU .. Batten TPH ..

FS = Colour lacquered super matt FS = Colour lacquered super matt
120 frosty white 277 black 120 frosty white 410 metal coloured
MS = Metal satin finish 277 black
405 stainless steel

80.20 1/2022
Compact material worktops

Compact material
Styles 81. 01

Compact material worktops - Top thickness 1 cm 81. 02

Processing 81. 02-03

Compact material side panels - Thickness 1 cm 81. 04

81.
Compact material base plates - for finishing tops, bottom and shelves 81. 04

1/2022 81.
 Planning tips cooking / rinsing
Minimum distance for fitted worktop elements

G
Minimum bridge widths
Compact material

for all worktop thicknesses F

B B
E

D C

81.

A A
No
clamp fittings

Minimum bridge widths B

for sink installation in the corner
C

H
No
clamp fittings

Installation
from above flush with surface flush
Minimum bridge width for * cut-out raw cut-out rebated underneath
A Cut-out to front edge 5,5 cm 5,5 cm 5,5 cm

B Cut-out to rear edge 4 cm 4 cm 4 cm

C Cut-out to side edge 4 cm 5 cm 10 cm

D Cut-out to cut-out 5 cm 7 cm 10 cm

E Drill hole to cut-out 3 cm 3 cm 3 cm

* this value represents the smallest technically possible F Drill hole to edge 3 cm 3 cm 3 cm
bridge width, depending on the worktop material. Please
also take into consideration the worktop overhang, G Drill hole to drill hole 3 cm 3 cm 3 cm
possible reinforcing strips to the underside of thin tops
H Cut-out to front edge 5,5 cm 5,5 cm 5,5 cm
and the construction of the cupboard.

Special sink installations Coating Built-under sink installation

4
Adhesion
Built-under sinks may be installed in compact material
Sink worktops.
The mountable stainless steel and artificial stone sinks
can be found in chapter 92.
Please indicate the desired sink position exactly in you
order.
All built-under sinks are installed waterproof in an
elaborate procedure.
Cast resin bed
Worktop

Silicone Flush mounted sink installation

5b
Coating
For on-site installation of flush mounted hobs in
worktops.

Stainless steel sink

Worktop

81. 1/2022
Worktop compact material
Compact worktop KP

STYLE KPS

AP KP1 ... KPS K 100 arctic K 103 merino K 120 frosty white

Top thickness 1 cm
Edge colour: K 277 black

K 130 mohair K 134 olive grey

K 177 trentino porphyr K 453 ouro preto K 481 dark concrete

K 482 corvo

STYLE KPW

AP KP1 ... KPW K 120 frosty white

Top thickness 1 cm
Edge colour: K 120 frosty white

Compact worktops consist of solid laminate with décor covering layers. The mate-
rial is fully damp proof. The physical material properties allow slim material thick-
nesses which, together with the dark or white core of the top, present a contem-
porary design.
In visible areas, the edges have small bevels. To enhance the material character, the
bevels are continued along the butt joints. A built-under sink installation is recom-
mended so that the material properties for this function area can be put to full use.
We recommend the disposition of cut-outs in the order!

1/2022 81.01
 Style
Compact material worktops
Top thickness 1 cm

Neutral
Type sketch Description/Planning Type KPS KPW
Compact material worktop per metre
thickness 1 cm Depth charge per started 10 cm
Edge colour K 277 black up to 60 cm APKP160KPS 269 -
Front edge polished and bevelled up to 70 cm APKP170KPS 307 -
all decors max. length 405 cm up to 90 cm APKP190KPS 398 -
1
up to 120 cm APKP1120KPS 538 -
Max. worktop projection 4 cm! up to 128 cm APKP1128KPS 583 -

Compact material worktop per metre

thickness 1 cm Depth charge per started 10 cm
Edge colour K 120 frosty white up to 60 cm APKP160KPW - 298
Front edge polished and bevelled up to 70 cm APKP170KPW - 342
all decors max. length 405 cm up to 90 cm APKP190KPW - 440
1
up to 120 cm APKP1120KPW - 582
Max. worktop projection 4 cm! up to 128 cm APKP1128KPW - 631

Style
Processing

Neutral
Type sketch Description Planning Type KPS KPW
Cutout Only to sketch and type of hob or sink. AUSKP 100
for sinks and hobs Note minimum bridge widths! 1
not edged
rectangular or round shape

Cutout for surface flush installation Only to sketch and type of hob. AUSKPF 390
of hobs Note minimum bridge widths! 2
with seam
rectangular or round shape
Minimum radius 0.4 cm
Rebate depth 0.7 cm

Silicone Cutout for surface flush installation Please indicate the desired sink AUSKPFS 390
of stainless steel sinks position exactly in you order. 5b
Coating
with seam
For on-site installation of stainless steel sinks
with flat edge from our compact material
programme.

Stainless steel
sink
Worktop

Décor Built-under sink installation Built-under sinks can be installed in SPUKPU 390
incl. cut-out compact material worktops. 4
Adhesion
The mountable stainless steel, Silgranite
Sink / Bowl
and Fragranite sinks can be found in the
chapter 92.
Please indicate the desired sink position
exactly in you order.
All built-under sinks are installed water-
proof in an elaborate procedure.
Cast resin bed
Compact top

Cutout Please state desired size and position (sketch). .

with free angle Necessary to state angle.
inside corner at least 1.6 cm radius

R 1,6 edge polished and bevelled AUKKP1FK 83

without finished edge AUKKP1F 71

81.02 1/2022
 Style
Processing

Neutral
Type sketch Description Planning Type KPS KPW
Cutout rounded Only to sketch, AUKKP1RK 94
inside corner at least 2.5 cm radius necessary to state radius.
edge polished and bevelled
R 2,5

or

R 2,5

Chamfer External chamfer to sketch, .

with free angle necessary to state angle.

edge polished and bevelled ASKP1FK 63

without finished edge ASKP 52

External radii Only to sketch, ARFKP1 74

free radii up to quarter circle necessary to state radius.
smallest radius 0.1 cm
edge polished and bevelled

Corner connection 90° Extra charge for corner and length per top part
Both parts butt-jointed with connections. EVKP90 20
continuous bevelled edge Note for calculation:
tongue and groove connection total price = 2x EV ..

Corner connection, angled Worktop calculation: per top part

for any angle per top longest length. EVKPF 31
with tongue and groove connection With metre joint only!
Note for calculation:
total price = 2x EV ..

Depth connection Format depth extension for work- STFKP 46

Both parts butt-jointed with tops of more than 130 cm.
continuous bevelled edge Worktop calculation:
tongue and groove connection size of basic top plus
the added piece + STF KP.

Covering panel visible HBPKP60 0

HBPKP70 0
HBPKP90 0
HBPKP120 0
HBPKP128 0

Edge finish For additional edge processing. per 10 cm

edge polished and bevelled AKKP1 3

Cutout Please state position (sketch). AUSBFKP 95

for socket element STE BF 2

Drill hole 0.5 to 5 cm diameter Please state diameter and position per drilling
Ø max. 5 for taps or eccentric valve (sketch). AMBOKP 21

Drill hole 10.2 cm diameter Please state position (sketch). per drilling
Ø 10,2 for socket element STE 10 3 and STEU 10 2 STBOKP 34

1/2022 81.03
 Style
Compact material side panels
Thickness 1 cm

Neutral
Type sketch Description Planning Type KPS KPW
Compact material side panel W1KP.. Please state height and depth on order! per metre
thickness 1 cm W1.. side panels always require a charge per started 10 cm
both sides finished cupboard side for fixing! .
visible edge allround Minimum length for calculation, 50 cm.
maximum height 255 cm Indicate L/R for visible side.

depth 10 cm W1KP2210 L/R 61 70

up to depth 36.5 cm W1KP2236 L/R 145 163
up to depth 60 cm W1KP2260 L/R 236 266
up to depth 70 cm W1KP2270 L/R 274 308
up to depth 90 cm W1KP2290 L/R 352 395
up to depth 120 cm W1KP22120 L/R 481 508
up to depth 128 cm W1KP22128 L/R 522 553

Style
Compact material shelves
for finishing tops, bottom and shelves

Neutral
Type sketch Description Planning Type KPS KPW
Shelf B1KP.. No top shelves available. per metre
thickness 1 cm Do not plan projecting covering charge per started 10 cm
both sides finished tops and lining shelves! .
visible edge allround Processing types for shelves,
special adhesive tape see worktops.
maximum length 405 cm Please state length and depth
on order!
Minimum length for calculation, 50 cm.

depth 10 cm B1KP10 61 70
up to depth 36.5 cm B1KP36 145 163
up to depth 60 cm B1KP60 236 266
up to depth 70 cm B1KP70 274 308
up to depth 90 cm B1KP90 352 395
up to depth 120 cm B1KP120 481 508
up to depth 128 cm B1KP128 522 553

81.04 1/2022
Natural stone worktops

Styles 82. 01-02

Natural stone worktops - Top thickness 2.6 cm and 4 cm 82. 03

Natural stone worktops - Processing / Accessories 82. 03-04

Natural stone niche panels - Top thickness 1.1 cm 82. 05

Natural stone side panels in variable sizes - Thickness 2.6 cm and 4 cm 82. 06

Natural stone
82.

1/2022 82.
 Planning tips cooking / rinsing
Minimum distance for fitted worktop elements

G
Minimum bridge widths
for all worktop thicknesses F
B B
Natural stone E

D C

A A
Natural stone

82. Minimum bridge widths B

for sink installation in the corner
C

Natural stone worktops Installation

from above flush with surface built-under
Minimum bridge width for * cut-out raw cut-out rebated cut-out polished
A Cut-out to front edge 5 cm 5 cm 8,5 cm

B Cut-out to rear edge 4 cm 4 cm 6,5 cm

C Cut-out to side edge 4 cm 4 cm 10 cm

D Cut-out to cut-out 4 cm 4 cm 10 cm

E Drill hole to cut-out 3 cm 3 cm 5,5 cm

* this value represents the smallest technically possible F Drill hole to edge 4 cm 4 cm 4 cm
bridge width, depending on the worktop material. Please
also take into consideration the worktop overhang, G Drill hole to drill hole 3 cm 3 cm 3 cm
possible reinforcing strips to the underside of thin tops
H Cut-out to front edge 5 cm 5 cm 8,5 cm
and the construction of the cupboard.

82. 1/2022
Natural stone worktops
Styles

STYLE R1

685 nero san marcos satined

STYLE R2

686 steel gray satined

STYLE R3

687 nero assoluto waterjet

STYLE R4

689 negresco satined 690 breccia imperiale satined 691 black musk waterjet

STYLE R5

683 taj mahal sanded 684 white fantasy sanded

Please note: The weight of natural stone worktops is approx. 40 kg/m²! Worktops and niche claddings must be stored and transported upright
only, preferably on the rear edge. Worktops must not be transported lying flat. A twisting of the tops can cause cracks at cut-outs.
All transports and placement on kitchen cupboards must be done with great care.
Natural stone worktops are delivered standing up. The usually very heavy worktops may only be moved with sufficient personnel
and suitable lifting equipment.

1/2022 82.01
82.02 1/2022
 Style
Natural stone worktops
Top thickness 2.6 cm and 4 cm

Neutral
Type sketch Description/Planning Type R1 R2 R3 R4 R5
Natural stone worktop per metre
thickness 2.6 cm Standard depth charge per started 10 cm
mitred edge filler up to 60 cm APGR360 560 690 888 1040 1381
Front edge processed up to 90 cm APGR390 848 1046 1324 1553 2068
2,6
max. length 280 cm up to 130 cm APGR3130 1119 1379 1759 2062 2745

Natural stone worktop per metre

thickness 4 cm Standard depth charge per started 10 cm
mitred edge filler up to 60 cm APGR460 560 690 888 1040 1381
Front edge processed up to 90 cm APGR490 848 1046 1324 1553 2068
4
max. length 280 cm up to 130 cm APGR4130 1119 1379 1759 2062 2745

Style
Natural stone worktops
Processing / Accessories

Neutral
Type sketch Description/Planning Type R1 R2 R3 R4 R5
Cutout AUSGR 262
unfinished edges 1
for sinks and hobs
rectangular or round shape
Minimum radius 0.5 cm

Only to sketch and type of hob or sink.

Installation possibility subject to checking of feasibility at factory
(cutouts in danger of breaking if placed to close).

Cutout AUSGRF 393

flush-surface installation 2
for sinks and hobs
rectangular or round shape
Minimum radius 0.5 cm
with seam

Only to sketch and type of hob or sink.

Cutout AUSGRP 652

polished edges 3a
for built-under sinks
rectangular or round shape
Minimum radius 0.5 cm
incl. fixing material

Only to sketch and type of sink.

For stainless steel and artificial stone sinks.

Corner connection 90° per top part

Butt-joint finish EVGR 0
blunt, refracted edges

Cutout .
with free angle

with finished edge AUKGRFK 262

without radius

without finished edge AUKGRF 75

R 0,5 Minimum radius 0.5 cm

Please state desired size and position (sketch).

Necessary to state angle.

1/2022 82.03
 Style
Natural stone worktops
Processing / Accessories

Neutral
Type sketch Description/Planning Type R1 R2 R3 R4 R5
Chamfer .
with free angle

with finished edge ASGRFK 199

without finished edge ASGRF 75

External chamfer to sketch,

necessary to state angle.

Length connection per top part

Butt-joint finish LVGR 0
blunt, refracted edges

Edge finish per 10 cm

mitred edge filler 2.6 cm thick
Front edge processed AKGR3 12

4 cm thick
AKGR4 12

Cutout AUSBFGR 262

for socket element STE BF 2

Please state position (sketch).

Drill hole 0.5 to 5 cm diameter per drilling

Ø max. 5 for taps or eccentric valve AMBOGR 47

Please state diameter and position (sketch).

Drill hole 10.2 cm diameter per drilling

Ø 10,2 for socket element STE 10 3 and STEU 10 2 STBO10GR 47

Please state position (sketch).

Natural stone wall contour blender per metre

Surface finished on one side charge per started 10 cm
Visible edges processed WAAGR1 74 100 128 150 199
thickness 1.1 cm, max. length 90 cm
4 cm high

Please state exact fixed lengths. Corners are butted (no mitre).
Please allow for material thickness.
Use only natural stone-silicon for fixing.

Care product for natural stone ZPFAPGR 24

82.04 1/2022
 Style
Natural stone niche panels
Top thickness 1.1 cm

Neutral
Type sketch Description/Planning Type R1 R2 R3 R4 R5
Natural stone niche panel price per square metres
in variable height and width TRUGR1 418 544 851 998 1325
top thickness 1.1 cm
unfinished edges
maximum height 130 cm
maximum width 200 cm

Minimum charged 0.3 square metres.

Edge finish per 10 cm

Edge processed and chamfered AKGR1 5

Socket cutout S1TRUGR 141

for 1 socket
min. 5 cm

cutout Ø 6.8 cm
y

x Please state position (sketch).

min. 6 cm
Please state measurements from left (x) and from below (y)
up to cut-out centre!

Socket cutout S2TRUGR 141

for 2 sockets
min. 5 cm

cutout 13.9 x 6.8 cm

y

x Please state position (sketch).

min. 6 cm
Please state measurements from left (x) and from below (y)
up to cut-out centre!

Socket cutout S3TRUGR 141

for 3 sockets
min. 5 cm

cutout 21 x 6.8 cm
y

x Please state position (sketch).

min. 6 cm
Please state measurements from left (x) and from below (y)
up to cut-out centre!

Socket cutout S4TRUGR 141

for 4 sockets
min. 5 cm

cutout 28.1 x 6.8 cm

y

x Please state position (sketch).

min. 6 cm
Please state measurements from left (x) and from below (y)
up to cut-out centre!

1/2022 82.05
 Style
Natural stone side panels in variable sizes
Thickness 2.6 cm and 4 cm

Neutral
Type sketch Description/Planning Type R1 R2 R3 R4 R5
Natural stone side panel W3GR.. per metre
one side visible charge per started 10 cm
thickness 2.6 cm
maximum height 120 cm

1 long edge finished .

up to a depth of 60 cm W3GR1160 L/R 662 779 957 1094 1433
10 cm
up to a depth of 90 cm W3GR1190 L/R 921 1100 1350 1556 2051
up to a depth of 130 cm W3GR11130 L/R 1166 1399 1741 2014 2692

10 cm 2 long edges finished .

up to a depth of 60 cm W3GR1260 L/R 820 938 1115 1253 1623
up to a depth of 90 cm W3GR1290 L/R 1079 1258 1508 1714 2241
10 cm
up to a depth of 130 cm W3GR12130 L/R 1324 1557 1900 2172 2851

Please state height and depth on order!

Indicate L/R for visible side.

Natural stone side panel W4GR.. per metre

one side visible charge per started 10 cm
thickness 4 cm
maximum height 120 cm

1 long edge finished .

up to a depth of 60 cm W4GR1160 L/R 662 779 957 1094 1433
10 cm
up to a depth of 90 cm W4GR1190 L/R 921 1100 1350 1556 2051
up to a depth of 130 cm W4GR11130 L/R 1166 1399 1741 2014 2692

10 cm 2 long edges finished .

up to a depth of 60 cm W4GR1260 L/R 820 938 1115 1253 1623
up to a depth of 90 cm W4GR1290 L/R 1079 1258 1508 1714 2241
10 cm
up to a depth of 130 cm W4GR12130 L/R 1324 1557 1900 2172 2851

Please state height and depth on order!

Indicate L/R for visible side.

Safety instructions:
- side panels must only be planned floor standing
- not possible with dishwashers or other below-table appliances at the end of a run

82.06 1/2022
Glass worktops

Styles 83. 01

Glass worktops - Top thickness 1.3 cm 83. 02

Processing 83. 02-03

Glass niche panels 83. 03-04

Glass side panels - Thickness 1.3 cm 83. 04

Glass
83.

1/2022 83.
 Planning tips cooking / rinsing
Minimum distance for fitted worktop elements

G
Minimum bridge widths
for all worktop thicknesses F
B B
E

D C

A A
No
clamp fittings

Minimum bridge widths B

for sink installation in the corner
C

A
No
clamp fittings
Glass

83.

Installation
from above flush with surface built-under
Minimum bridge width for * cut-out raw cut-out rebated cut-out polished
A Cut-out to front edge 5 cm 5 cm 10 cm

B Cut-out to rear edge 5 cm 5 cm 5 cm

C Cut-out to side edge 8 cm 8 cm 8 cm

D Cut-out to cut-out 6 cm 6 cm 6 cm

E Drill hole to cut-out 3 cm 3 cm 3 cm

* this value represents the smallest technically possible F Drill hole to edge 3 cm 3 cm 3 cm
bridge width, depending on the worktop material. Please
also take into consideration the worktop overhang, G Drill hole to drill hole (to Ø 50 mm) 3 cm 3 cm 3 cm
1
possible reinforcing strips to the underside of thin tops
G Drill hole to drill hole (from Ø 51 mm) 5 cm 5 cm 5 cm
and the construction of the cupboard. 2

Special installations Silicone 2

Flush mounted hob installation

Worktop For on-site installation of flush mounted hobs in glass

worktops.

Folding strip
Hob

Silicone Flush mounted sink installation

5b

Worktop For on-site installation of flush mounted sinks in glass

worktops.

Stainless steel sink

83. 1/2022
Glass worktops
Top thickness 1,3 cm

The 1,3 cm thick glass worktop has a 0,06 cm thick protective

layer on the underside. For aesthetic reasons it is recessed by
2 cm.
The glass cover is 1,2 cm thick and coated on both sides.
The surface is satin-finished, the underside individually coat-
ed with RAL-colours from the colour spectrum “Classic” /
“Design” or NCS-colours. We use a white safety glass type.
Safety glass is resistant against common temperatures in the
APGL1 kitchen (approx. 220 degrees) and is largely shockproof. If
the glass fails (which would only occur through damage by
Available colours extremely hard and pointed objects), it disintegrates into very
Available exclusively from the RAL-colour system “Classic” / small pieces, making the risk of injury almost nonexistent.
“Design” or NCS-colour system, excluding metallic and The satin-finished surface is largely insensitive to mechani-
luminescent paints. cal damage. Minor traces of use, particularly with dark colour
tones are unavoidable.
A particularly good appearance is achieved with a built-under

RAL / NCS sink bowl. The glass top has a polished cutout. A factory instal-
lation of the bowl is essential.
Rear panels in the same thickness glass are also available.
Please note:
Requested colours from the RAL-colour range can only be re-
produced approximately because of the physical glass proper-
ties. The refraction characteristics of the glass, the softness of
the satin-finished surface and the different reflection perspec-
tives lead to diverging colour perception. Differing colour ef-
fects between worktops and rear panels are also possible. The
reason for this are once again the varying light effects.
RAL-/NCS-colours

1/2022 83.01
Glass worktops
Top thickness 1.3 cm

Type sketch Description/Planning Type

Glass worktop per metre

thickness 1.3 cm Depth charge per started 10 cm
glass top 1.2 cm up to 60 cm APGL160 974
HPL protection on underside, up to 70 cm APGL170 1162
1,2 2 cm recessed on visible edges up to 90 cm APGL190 1462
0,1 matted glass edge up to 120 cm APGL1120 1885
max. length 300 cm up to 130 cm APGL1130 2073

Processing

Type sketch Description Planning Type

Cutout Only to sketch and type of hob or sink. AUSGL 415

smoothed edges Installation possibility subject to checking 1
for sinks and hobs of feasibility at factory.
rectangular or round shape
Attention:
smallest possible inner radius 0.8 cm

Silicone Cutout for surface flush installation Please indicate the desired sink AUSGLFS 968
of stainless steel sinks position exactly in you order. 5b
Worktop
with seam
smoothed edges
Attention:
smallest possible inner radius 1.2 cm
For on-site installation of stainless steel sinks
with flat edge from our glass worktops
Stainless steel sink
programme.

Cutout with sink installation Only to sketch and type of sink. AUSGLPE 726
matted glass edge 3b
for built-under sinks
factory installation
Attention:
smallest possible inner radius 1.1 cm

Silicone Cutout for surface flush installation Only to sketch and make of hob. AUSFGL 605
of hobs Mounting option subject to checking at factory.
Worktop
soft edges Worktop depth min. 65 cm,
radius min. 0.6 cm cutout to front edge min. 5 cm.
Please note radii of the hob.

Folding strip
Hob

Cutout Please state desired size and position (sketch). .

R 1,3 with free angle Necessary to state angle.
Glass transitions to internal angles
with finished edge always have an inner radius of 1.3 cm. AUKGLFK 356

without finished edge AUKGLF 312

Cutout rounded Only to sketch, AUKGLRK 400

with finished edge necessary to state radius.
radius 10 cm up to 100 cm Glass transitions to internal angles
always have an inner radius of 1.3 cm.
R 1,3
or

83.02 1/2022
Processing

Type sketch Description Planning Type

Chamfer External chamfer to sketch, ASGL 248

with free angle necessary to state angle.
with finished edge Calculations: chamfer AS GL
+ edge processing AK GL
in full (largest) worktop depth.
External radii Sketch required, essential to ARFGL 274
with finished edge state radii (max. 100 cm).
quarter circle Calculations: external radii ARF GL
+ edge processing AK GL
in full (largest) worktop depth.
Corner connection 90° Note for calculation: EVGL1 61
Butt-joint finish total price = 2x EV ..
front polished mitre
Seal worktop joint with chemically stable
curing natural stone silicone

Length connection Note for calculation: per top part

Butt-joint finish total price = 2x LV .. LVGL1 61
Seal worktop joint with chemically stable
curing natural stone silicone

Edge finish For additional edge processing. per 10 cm length

polished glass edge AKGL 11

Cutout Please state position (sketch). AUSBFGL 445

for socket element STE BF 2 Because of the lower lateral cover, it is possible to see
the shadow of the cut edges.

Drill hole 1.3 to 5 cm diameter Please state diameter and position per drilling
Ø max. 5 for taps or eccentric valve (sketch). AMBOGL 51

Drill hole 10.2 cm diameter Please state position (sketch). per drilling
Ø 10,2 for socket element STE 10 3 and STEU 10 2 STBO10GL 111

Glass niche panels

Type sketch Description Planning Type

Glass niche panel Minimum charged 0.5 square metres. price per square metres
in variable height and width TRUGL 1034
White glass (ESG) satin finished one side
glass thickness 1.2 cm
all edges bevelled and polished
maximum height 130 cm
maximum width 300 cm

Chamfer External chamfer to sketch, ASTRUGL 62

with free angle necessary to state angle.
with polished edge

Coloured glass elements such as fronts, worktops, side panels and niche rear panels are matched with great care. The white glass used, forms the basis of a
high degree of neutral colouring. However, even this high quality glass is subject to slight colour fluctuations - even within a batch.
Hence, glass elements of the same colour can only be manufactured with approximately matching colours.
The refraction of glass, based on physical reasons, produces additional colour effects, depending on the installation position, the thickness of the glass, illu-
mination and selected colour of the glass elements.

1/2022 83.03
Glass niche panels

Type sketch Description Planning Type

External radii Only to sketch, ARFTRUGL 87

with polished edge necessary to state radius.

Inner curve Only to sketch, IRTRUGL 373

with polished edge necessary to state radius.
min. 12 cm

Cutout Please state desired size and position (sketch). AUKTRUGL 373
with interior radius 1.3 cm and Necessary to state angle.
min. 12 cm

polished edge

Socket cutout Please state position (sketch). S1TRUGL 104

for 1 socket Please state measurements from left (x) and from below (y)
min. 5 cm

cutout Ø 6.8 cm up to cut-out centre!

y

x
min. 6 cm

Socket cutout Please state position (sketch). S2TRUGL 189

for 2 sockets Please state measurements from left (x) and from below (y)
min. 5 cm

cutout 13.9 x 6.8 cm up to cut-out centre!

y

x
min. 6 cm

Socket cutout Please state position (sketch). S3TRUGL 276

for 3 sockets Please state measurements from left (x) and from below (y)
min. 5 cm

cutout 21 x 6.8 cm up to cut-out centre!

y

x
min. 6 cm

Socket cutout Please state position (sketch). S4TRUGL 343

for 4 sockets Please state measurements from left (x) and from below (y)
min. 5 cm

cutout 28.1 x 6.8 cm up to cut-out centre!

y

x
min. 6 cm

Drill hole 1.3 to 5 cm diameter Please state diameter and position per drilling
(sketch). AMBOTRU 38

Glass side panels

Thickness 1.3 cm

Type sketch Description Planning Type

Glass side panel W1GL.. Please state height and depth on order! per metre
thickness 1.3 cm Use preferably with APGL.. . charge per started 10 cm
glass thickness 1.2 cm Minimum depth in relation to the length 1:10. .
White glass (ESG) satin finished one side, Minimum length for calculation, 50 cm.
reverse colour lacquered Indicate L/R for visible side.
all edges bevelled and polished, Safety instructions:
corners bevelled - side panels must only be planned floor standing
special adhesive tape - not possible with dishwashers
maximum height 250 cm or other below-table appliances
at the end of a run

up to a depth of 60 cm W1GL1260 L/R 848

up to a depth of 70 cm W1GL1270 L/R 976
up to a depth of 90 cm W1GL1290 L/R 1233
up to a depth of 120 cm W1GL12120 L/R 1617
up to a depth of 130 cm W1GL12130 L/R 1748

Coloured glass elements such as fronts, worktops, side panels and niche rear panels are matched with great care. The white glass used, forms the basis of a
high degree of neutral colouring. However, even this high quality glass is subject to slight colour fluctuations - even within a batch.
Hence, glass elements of the same colour can only be manufactured with approximately matching colours.
The refraction of glass, based on physical reasons, produces additional colour effects, depending on the installation position, the thickness of the glass, illu-
mination and selected colour of the glass elements.

83.04 1/2022
Solid wood worktops

Styles 84. 01

Solid wood worktops - Top thickness 3 cm 84. 02

Solid wood worktops - Top thickness 4 cm 84. 02

Solid wood worktops - Top thickness 6 cm 84. 03

Processing / Accessories - Front edge with 45 degrees bevel both sides 84. 03-04

Solid wood side panels in variable sizes - Top thickness 3 cm and 4 cm 84. 05

Solid wood side panels in variable sizes - Top thickness 6 cm 84. 06

Solid wood
84.

1/2022 84.
 Planning tips cooking / rinsing
Minimum distance for fitted worktop elements

G
Minimum bridge widths
for all worktop thicknesses F
B B
E

D C

A A
Clamp fittings

Minimum bridge widths B B

for sink installation in the corner
C

H A
No
clamp fittings Clamp fittings

Installation
from above
Solid wood

Minimum bridge width for * cut-out raw

A Cut-out to front edge 5 cm

B Cut-out to rear edge 5 cm

84.
C Cut-out to side edge 10 cm **

D Cut-out to cut-out 8 cm ***

E Drill hole to cut-out 3 cm

F Drill hole to edge 3 cm

G Drill hole to drill hole 3 cm

* this value represents the smallest technically possible H Cut-out to front edge 7,5 cm
bridge width, depending on the worktop material. Please
also take into consideration the worktop overhang,
possible reinforcing strips to the underside of thin tops ** From AP depth 90 cm, the distance is 20 cm.
and the construction of the cupboard. *** 2 adjoining cut-outs are not recommended, danger or warping.

84. 1/2022
Solid wood worktops
Top thickness 3 cm, 4 cm and 6 cm

STYLE MR1

H 118 oak limed

STYLE MR3

H 117 oak distinctive

STYLE MR4

H 116 walnut

Please note:
Being a naturally grown material, wood always shows
slight variations in grain and colour, which add to its
appeal. These are genuine characteristics which are
emphasised when oiled and lend each wood worktop
its special character. Due to ultra violet light and other
environment influences, changes to colour are inevita-
ble, therefore this sample colour cannot be guaranteed.
Every kitchen is supplied with a care and main-
tenance instruction booklet, please hand this to
your customer.

1/2022 84.01
 Style
Solid wood worktops
Top thickness 3 cm

Neutral
Type sketch Description/Planning Type MR1MR3MR4
Solid wood worktop per metre
thickness 3 cm Depth charge per started 10 cm
maximum supplied length 490 cm up to 60 cm APMF360 419 479 800
edge type as surface up to 70 cm APMF370 515 552 946
Front edge with 45° bevel both sides up to 90 cm APMF390 612 698 1147
up to 120 cm APMF3120 833 974 1496
3 up to 130 cm APMF3130 917 1072 1646

The other side is visible per metre

with 3 cm thick worktops and Depth charge per started 10 cm
side panels up to 60 cm USS360 126 144 240
up to 70 cm USS370 155 166 284
up to 90 cm USS390 184 209 344
up to 120 cm USS3120 250 292 449
up to 130 cm USS3130 275 321 494

Solid wood worktop per metre

with mitred edge blender Depth charge per started 10 cm
thickness 3 cm up to 60 cm APMF36027 707 793 1241
All edges in visible edge style up to 70 cm APMF37027 755 928 1346
Max. edge height 27 cm + AP-thickness up to 90 cm APMF39027 928 1069 1591
max. 27 Maximum supplied length 300 cm up to 120 cm APMF312027 1083 1266 1945
up to 130 cm APMF313027 1170 1367 2101
Possible processing: AUS M

Style
Solid wood worktops
Top thickness 4 cm

Neutral
Type sketch Description/Planning Type MR1MR3MR4
Solid wood worktop per metre
thickness 4 cm Depth charge per started 10 cm
maximum supplied length 490 cm up to 60 cm APMF460 474 543 906
edge type as surface up to 70 cm APMF470 583 625 1113
Front edge with 45° bevel both sides up to 90 cm APMF490 693 790 1298
up to 120 cm APMF4120 943 1103 1694
4
up to 130 cm APMF4130 1037 1212 1862

The other side is visible per metre

with 4 cm thick worktops and Depth charge per started 10 cm
side panels up to 60 cm USS460 156 179 299
up to 70 cm USS470 192 206 367
up to 90 cm USS490 229 261 428
up to 120 cm USS4120 311 364 559
up to 130 cm USS4130 337 394 606

Solid wood worktop per metre

with mitred edge blender Depth charge per started 10 cm
thickness 4 cm up to 60 cm APMF46027 808 906 1413
All edges in visible edge style up to 70 cm APMF47027 890 963 1551
Max. edge height 27 cm + AP-thickness up to 90 cm APMF49027 1058 1218 1808
max. 27 Maximum supplied length 300 cm up to 120 cm APMF412027 1359 1552 2281
up to 130 cm APMF413027 1466 1675 2467
Possible processing: AUS M

84.02 1/2022
 Style
Solid wood worktops
Top thickness 6 cm

Neutral
Type sketch Description/Planning Type MR1MR3MR4
Solid wood worktop per metre
thickness 6 cm Depth charge per started 10 cm
maximum supplied length 300 cm up to 60 cm APMF660 806 922 1333
edge type as surface up to 70 cm APMF670 991 1063 1555
Front edge with 45° bevel both sides up to 90 cm APMF690 1179 1343 1951
up to 120 cm APMF6120 1603 1875 2541
up to 130 cm APMF6130 1763 2061 2793

The other side is visible per metre

with 6 cm thick worktops and Depth charge per started 10 cm
side panels up to 60 cm USS660 266 304 440
up to 70 cm USS670 327 351 513
up to 90 cm USS690 389 443 644
up to 120 cm USS6120 529 619 839
up to 130 cm USS6130 573 671 909

Solid wood worktop per metre

with mitred edge blender Depth charge per started 10 cm
thickness 6 cm up to 62 cm APMF66027 1293 1458 2027
All edges in visible edge style up to 72 cm APMF67027 1445 1574 2116
Max. edge height 27 cm + AP-thickness up to 90 cm APMF69027 1719 1989 2655
max. 27 Maximum supplied length 300 cm up to 120 cm APMF612027 1874 2447 3385
up to 130 cm APMF613027 2032 2647 3666
Possible processing: AUS M

Ordering tip:
Please include sketch with dimensions when ordering (State angles, appliance manufacturer, radius etc).

Maintenance tip:
Solid wood worktop surfaces must always be properly maintained. Once a week apply oil thinly, for additional treatment order maintenance set.

Style
Processing / Accessories
Front edge with 45° bevel both sides

Neutral
Type sketch Description/Planning Type MR1MR3MR4
Cutout Supplied according to drawing AUSM 49
for sinks and hobs and appliance specification. 1
rectangular or round shape

Cutout Please state desired size and position .

with free angle (sketch).
Necessary to state angle.

with finished edge AUKMFK 50

without finished edge AUKMF 29

Chamfer External chamfer to sketch, ASMF 29

with free angle necessary to state angle.
without finished edge For chamfers with finished
edge, please plan AK MR .

External radii For external curves with finished ARMF 53

free radius edge please plan AK MR.
without finished edge Please state radius.

Corner connection 90° Note for calculation: per top part

with connecting bolts total price = 2x EV .. EVM 40
tongue and groove connection
with bolts per joint

1/2022 84.03
 Style
Processing / Accessories
Front edge with 45° bevel both sides

Neutral
Type sketch Description/Planning Type MR1MR3MR4
Corner connection, angled Worktop calculation: per top part
for any angle per top longest length. EVMF 127
with tongue and groove connection With metre joint only!
Note for calculation:
total price = 2x EV ..

Corner connection mitred Worktop and side panel must be per top part
of worktops and side panels equally deep. EVGMF 55
with fitment Gluing on site.
max. side panel height 120 cm Note for calculation:
total price = 2x EV ..

Side edge finish up to 60 cm depth PKAMR 20

side edge with 45° bevel both sides, from 61 cm - 130 cm depth PKATMR 40
90° angle

Edge finish For rear and side edge finish, per 10 cm length
edge with 45° bevel both sides e.g. with free standing bars etc. AKMR 3

Cutout Please state position (sketch). AUSBFMF 32

for socket element STE BF 2

Drill hole 10.2 cm diameter Please state position (sketch). per drilling
for socket element STE 10 3 and STEU 10 2 STBO10M 35

Maintenance set For care of solid wood worktops. ZPFAPM 30

maintenance oil 0.25/P3
polishing sponge
2 lint free cloths

Side panel height adjustment Adjustment + 2 cm WH3 37

2 round legs WH4 47
WH6 63

Side panel floor fixing With tipping safety for free standing WB3 42
tongue and groove connection planning through bolting to side on site. WB4 63
WB6 63

Solid wood wall contour blender per metre

single piece charge per started 10 cm
height 4 cm, depth 1.2 cm WAP 42 48 51
maximum length 400 cm

Junctions are sealed with silicon

at time of installation.

84.04 1/2022
 Style
Solid wood side panels in variable sizes
Top thickness 3 cm and 4 cm

Neutral
Type sketch Description/Planning Type MR1MR3MR4
Solid wood side panel per metre
thickness 3 cm Depth charge per started 10 cm
One side visible, the other side front up to 60 cm W3MF1160 L/R 419 479 800
approx. 10 cm finished to be visible up to 70 cm W3MF1170 L/R 515 552 946
Front edge on both sides with 45° chamfer up to 90 cm W3MF1190 L/R 612 698 1147
maximum height 250 cm up to 120 cm W3MF11120 L/R 833 974 1496
up to 130 cm W3MF11130 L/R 917 1072 1646
Please state height and depth on order!
For two-sided visible planning
order USS ... in addition.
Indicate L/R for visible side.

Solid wood side panel per metre

thickness 3 cm Depth charge per started 10 cm
One side visible, the other side front up to 60 cm W3MF1260 L/R 461 527 880
approx. 10 cm finished to be visible up to 70 cm W3MF1270 L/R 567 607 1041
Front and rear edge both sides up to 90 cm W3MF1290 L/R 673 768 1262
with 45° chamfer up to 120 cm W3MF12120 L/R 916 1071 1646
maximum height 250 cm up to 130 cm W3MF12130 L/R 1009 1179 1811

Please state height and depth on order!

For two-sided visible planning
order USS ... in addition.
Indicate L/R for visible side.

Solid wood side panel per metre

thickness 4 cm Depth charge per started 10 cm
One side visible, the other side front up to 60 cm W4MF1160 L/R 474 543 906
approx. 10 cm finished to be visible up to 70 cm W4MF1170 L/R 583 625 1113
Front edge on both sides with 45° chamfer up to 90 cm W4MF1190 L/R 693 790 1298
maximum height 250 cm up to 120 cm W4MF11120 L/R 943 1103 1694
up to 130 cm W4MF11130 L/R 1037 1212 1862
Please state height and depth on order!
For two-sided visible planning
order USS ... in addition.
Indicate L/R for visible side.

Solid wood side panel per metre

thickness 4 cm Depth charge per started 10 cm
One side visible, the other side front up to 60 cm W4MF1260 L/R 501 574 958
approx. 10 cm finished to be visible up to 70 cm W4MF1270 L/R 616 661 1174
Front and rear edge both sides up to 90 cm W4MF1290 L/R 732 835 1372
with 45° chamfer up to 120 cm W4MF12120 L/R 997 1166 1790
maximum height 250 cm up to 130 cm W4MF12130 L/R 1096 1281 1968

Please state height and depth on order!

For two-sided visible planning
order USS ... in addition.
Indicate L/R for visible side.

1/2022 84.05
 Style
Solid wood side panels in variable sizes
Top thickness 6 cm

Neutral
Type sketch Description/Planning Type MR1MR3MR4
Solid wood side panel per metre
thickness 6 cm Depth charge per started 10 cm
One side visible, the other side front up to 60 cm W6MF1160 L/R 806 922 1333
approx. 10 cm finished to be visible up to 70 cm W6MF1170 L/R 991 1063 1555
Front edge on both sides with 45° chamfer up to 90 cm W6MF1190 L/R 1179 1343 1951
maximum height 250 cm up to 120 cm W6MF11120 L/R 1603 1875 2541
up to 130 cm W6MF11130 L/R 1763 2061 2793
Please state height and depth on order!
For two-sided visible planning
order USS ... in addition.
Indicate L/R for visible side.

Solid wood side panel per metre

thickness 6 cm Depth charge per started 10 cm
One side visible, the other side front up to 60 cm W6MF1260 L/R 852 975 1410
approx. 10 cm finished to be visible up to 70 cm W6MF1270 L/R 1047 1124 1644
Front and rear edge both sides up to 90 cm W6MF1290 L/R 1246 1420 2062
with 45° chamfer up to 120 cm W6MF12120 L/R 1694 1982 2686
maximum height 250 cm up to 130 cm W6MF12130 L/R 1863 2178 2952

Please state height and depth on order!

For two-sided visible planning
order USS ... in addition.
Indicate L/R for visible side.

84.06 1/2022
Porcelain ceramic worktops

Styles 85. 01

Porcelain ceramic worktops - Top thickness 1.2 cm, 2.2 cm and 4.1 cm 85. 02

Processing / Accessories 85. 03

Processing - Top thickness 1.2 cm 85. 03-04

Processing - Top thickness 2.2 cm and 4.1 cm 85. 04

Niche cladding porcelain ceramic 85. 05

Porcelain ceramic side panels in variable sizes 85. 06

Porcelain ceramic
85.

1/2022 85.
 Planning tips cooking / rinsing
Minimum distance for fitted worktop elements

G
Minimum bridge widths
for all worktop thicknesses F
B B
E

D C

*** A A
No
clamp fittings

Minimum bridge widths B

for sink installation in the corner
C

***
H
No
clamp fittings

*** Corner connection butt joined

with AP-thickness 1.2 cm.

Installation
from above flush with surface
Minimum bridge width for * cut-out raw cut-out rebated
A Cut-out to front edge 5 cm ** 5 cm **

B Cut-out to rear edge 5 cm ** 5 cm **

C Cut-out to side edge 8 cm 8 cm

D Cut-out to cut-out 5 cm ** 5 cm **
Porcelain ceramic

E Drill hole to cut-out 3 cm 3 cm

F Drill hole to edge 3 cm 3 cm

* this value represents the smallest technically possible
G Drill hole to drill hole 3 cm 3 cm
bridge width, depending on the worktop material. Please
also take into consideration the worktop overhang, H Cut-out to front edge 7,5 cm ** 7,5 cm **
85. possible reinforcing strips to the underside of thin tops
and the construction of the cupboard. ** 8 cm for AP-thickness 1,2 cm

Special installations Porcelain

Silicone
2
Flush mounted sink/hob installation
ceramic Folding strip
For on-site installation of flush mounted sinks/hobs in
worktops.

Sinks / hobs
Worktop

Silicone Flush mounted sink installation

5b
For on-site installation of flush mounted sinks in
worktops.

Porcelain ceramic
Stainless steel sink

85. 1/2022
Porcelain ceramic worktops
Worktop thickness 1,2 cm, 2,2 cm and 4,1 cm

STYLE PK1

535 namib 551 pietra di piombo

STYLE PK2

539 askja 540 pamir 541 marès

542 cordillera 544 nasca 545 iguazu

550 antarctica

Please note: Porcelain ceramic is a natural material. For its production, finely ground mineral raw materials are mixed, pressed and sintered in
specially designed high temperature furnaces. The surface, homogeneously compressed and hardened by the sintering process, is
extremely robust, scratch resistant and absolutely impervious to chemical influences. Above all it is food-safe and extremely easy to
care for. The décor is burnt into the surface.
The décors range from very plain colours to stone surfaces with a ‘close-to-nature’ appearance with an appealing feel. In order
to protect porcelain ceramic against breakage, the worktops are reinforced by an additional layer of tissue. 1.2 cm thick ceramic
worktops are made of solid raw material. For the 2.2 cm and 4.1 cm worktops thickness a 0.6 cm thick raw material is used, with
a colour matching edge mitred and glued. The sub-structure of these tops consists of a resilient honeycomb panel (2.2 cm) or of
aluminium hollow chamber profiles (4.1 cm).
Due to the brittle nature of the material, cut-outs and recesses are available only with a minimum radius of 0.6 cm. Built-under sinks
are not permitted, because of the increased impact load to edges around the sinks.
See also the special instructions in the care and maintenance manual!

1/2022 85.01
 Style
Porcelain ceramic worktops
Top thickness 1.2 cm, 2.2 cm and 4.1 cm

Type sketch Description/Planning Type PK1 PK2

Porcelain ceramic worktop per metre
thickness 1.2 cm Standard depth charge per started 10 cm
Front edge polished and bevelled up to 60 cm APPK160 495 568
1,2 max. length 315 cm up to 70 cm APPK170 615 696
up to 90 cm APPK190 779 877
up to 130 cm APPK1130 974 1130

Porcelain ceramic worktop per metre

thickness 2.2 cm Standard depth charge per started 10 cm
Porcelain ceramic 0.6 cm thick up to 60 cm APPK260 490 551
2,2 with under glued lightweight support panel up to 70 cm APPK270 565 635
and edge blender mitred up to 90 cm APPK290 671 755
max. length 315 cm up to 130 cm APPK2130 843 972

Porcelain ceramic worktop per metre

thickness 4.1 cm Standard depth charge per started 10 cm
Porcelain ceramic 0.6 cm thick up to 60 cm APPK460 526 588
with under glued lightweight support panel up to 70 cm APPK470 610 682
4,1
and edge blender mitred up to 90 cm APPK490 723 810
max. length 315 cm up to 130 cm APPK4130 952 1082

85.02 1/2022
Processing / Accessories

Type sketch Description Planning Type

Cutout Only to sketch and type of hob or sink. AUSPK 164

for sinks and hobs Note minimum bridge widths! 1
not edged
rectangular or round shape
inside corner at least 0.6 cm radius

Cutout for surface flush installation Only to sketch and type of sink. AUSPKFS 264
of stainless steel sinks Note minimum bridge widths! 5b
with seam
inside corner at least 0.6 cm radius
For on-site installation of stainless steel sinks
with flat edge from our porcelain ceramic
programme.

Cutout for surface flush installation Only to sketch and type of hob or sink. AUSPKF 264
of sinks and hobs Note minimum bridge widths! 2
with seam
rectangular or round shape

Cutout Please state position (sketch). AUSBFPK 87

for socket element STE BF 2

Drill hole 0.5 to 5 cm diameter Please state diameter and position per drilling
Ø max. 5 for taps or eccentric valve (sketch). AMBOPK 35

Drill hole 10.2 cm diameter Please state position (sketch). per drilling
Ø 10,2 for socket element STE 10 3 and STEU 10 2 STBO10PK 78

Porcelain ceramic Please state exact measurements. per metre

wall contour blender charge per started 10 cm
1 long edge polished and bevelled WAAPK 89
thickness 0.6 cm, max. length 290 cm
from 4 cm up to 10 cm high

Side edge processing per side edge

Leading edge polished and bevelled WAAPKS 20

Processing
Top thickness 1.2 cm

Type sketch Description Planning Type

Cutout Please state desired size and position (sketch). .

R 0,6 with free angle Necessary to state angle.
inside corner at least 0.6 cm radius 1.2 cm thick
with finished edge AUKPK1FK 120

without finished edge AUKPK1F 58

1/2022 85.03
Processing
Top thickness 1.2 cm

Type sketch Description Planning Type

Chamfer External chamfer to sketch, .

with free angle necessary to state angle. 1.2 cm thick
with finished edge ASPK1FK 95

without finished edge ASPK1F 33

Corner connection 90° Note for calculation: per top part

Butt-joint finish total price = 2x EV .. EVPK1 22
blunt, refracted edges

Length connection Note for calculation: per top part

Butt-joint finish total price = 2x LV .. LVPK1 22
blunt, refracted edges

Edge finish per 10 cm

edge polished and bevelled 1.2 cm thick
AKPK1 15

Processing
Top thickness 2.2 cm and 4.1 cm

Type sketch Description Planning Type

Cutout Please state desired size and position (sketch). AUKPKGF 58

R 0,6 with free angle Necessary to state angle.
inside corner at least 0.6 cm radius Because of the edge blender, recesses are only possible
without finished edge at the rear edge.

Chamfer External chamfer to sketch, .

with free angle necessary to state angle. 2.2 cm thick
with finished edge ASPK2FK 153

4.1 cm thick
ASPK4FK 153

without finished edge ASPKGF 33

Corner connection 90° Note for calculation: per top part

milled contour for tops total price = 2x EV .. EVPKG 184
with edge blender
edges blunted

Length connection Note for calculation: per top part

Butt-joint finish blunt total price = 2x LV .. LVPKG 45
for tops with edge blender
edges blunted

Edge finish For additional edge processing, e.g. with free-standing per 10 cm
mitred edge filler counters etc. 2.2 cm thick
AKPK2 17

4.1 cm thick
AKPK4 17

85.04 1/2022
 Style
Porcelain ceramic niche panels

Type sketch Description/Planning Type PK1 PK2

Porcelain ceramic niche panel price per square metres
in variable height and width TRUPK 398 484
top thickness 0.6 cm
Edges rough cut
maximum height 150 cm
maximum width 315 cm

Minimum charged 0.3 square metres.

Please state style ceramic and colour number
on order!

Edge finish per 10 cm

edge polished and bevelled 0.6 cm thick
AKPK 15

Socket cutout S1TRUPK 48

for 1 socket
min. 5 cm

cutout Ø 6.8 cm
y

x Please state position (sketch).

min. 6 cm
Please state measurements from left (x) and from below (y)
up to cut-out centre!

Socket cutout S2TRUPK 80

for 2 sockets
min. 5 cm

cutout 13.9 x 6.8 cm

y

x Please state position (sketch).

min. 6 cm
Please state measurements from left (x) and from below (y)
up to cut-out centre!

Socket cutout S3TRUPK 112

for 3 sockets
min. 5 cm

cutout 21 x 6.8 cm
y

x Please state position (sketch).

min. 6 cm
Please state measurements from left (x) and from below (y)
up to cut-out centre!

Socket cutout S4TRUPK 143

for 4 sockets
min. 5 cm

cutout 28.1 x 6.8 cm

y

x Please state position (sketch).

min. 6 cm
Please state measurements from left (x) and from below (y)
up to cut-out centre!

Drill holes for DOMO-railing Drill holes per railing

NSMBOPK 20
Please state position (sketch).
Upper edge of the DOMO-railing min. 36 cm
above worktop.
min. 36 cm

1/2022 85.05
 Style
Porcelain ceramic side panels in variable sizes

Type sketch Description/Planning Type PK1 PK2

Porcelain ceramic side panel W1PK.. per metre
thickness 1.2 cm charge per started 10 cm
maximum height 250 cm

Please state height and depth on order!

Indicate L/R for visible side.

Porcelain ceramic side panel W1PK..

one side visible

1 long edge finished .

up to a depth of 60 cm W1PK1160 L/R 557 629
up to a depth of 70 cm W1PK1170 L/R 677 757
up to a depth of 90 cm W1PK1190 L/R 841 938
up to a depth of 130 cm W1PK11130 L/R 1036 1192

2 long edges finished .

up to a depth of 60 cm W1PK1260 L/R 680 753
up to a depth of 70 cm W1PK1270 L/R 800 881
up to a depth of 90 cm W1PK1290 L/R 964 1062
up to a depth of 130 cm W1PK12130 L/R 1159 1315

85.06 1/2022
Accessories

Accessories 90. Chapter

Lighting / Electrical accessories 91. Chapter

Sinks / Taps 92. Chapter

Accessories

9.

1/2022 9.
 Accessories
Accessories

9.

9. 1/2022
Accessories

Accessories
90.

Combo 90. 01

Combo basic set for drawer boxes 90. 02

Combo function elements 90. 03

Combo for pullouts 90. 04-05

Combo drawer-sets 90. 06-07

Q-Box / Q-Vario 90. 08-09

Q-Box for drawers 90. 10-11

Q-Vario for pullouts 90. 11-12

Beech equipment 90. 13

Beech equipment for drawers 90. 14-15

Beech equipment for pullouts 90. 15

L-Box in oak 90. 16

L-Box in walnut 90. 17

L-Box in oak for drawers and pullouts 90. 18

L-Box in walnut for drawers and pullouts 90. 19

L-Box in oak drawer-sets 90. 20-21

L-Box in walnut drawer-sets 90. 22-23

Plastic equipment 90. 24

Plastic equipment for drawers 90. 25-26

Equipment for pullouts 90. 27

Inner drawers / Inner pullouts 90. 27-30

Anti slip mats 90. 31

Shelves 90. 32-34

Interior+ 90. 34

Wire accessories / Drop-in trays 90. 35

Built-in refuse container 90. 35

Slicer / Folding steps 90. 36

Further accessories 90. 36

Pull-out and drawer system

M8
M8 Special article variant for M8, The permissible equipment articles for M8 are described in the hea-
Add a …U to the order type. dings of the accessories chapters. Article variants on these pages
that have been specially modified for M8 are marked with a sym-
M8 Article not available for M8. bol, articles that are not available are explicitly excluded.

1/2022 90.
 Accessories
Accessories

90.

90. 1/2022
Combo
for pullout-/drawer system L3/M3 and M8

Interior arrangements Combo is a trailblazing interior design system with an unclut-

tered arrangement resulting from its clearly defined and calm
design. In contrast with existing organising systems, it is ar-
ranged predominantly transversely, thus emphasising the gener-
ous width of the drawer. It can be freely designed as the basic
configuration specifies only one division in compartments of
equal depth. The anthracite powder-coated profile and metal
components are combined with inserts of natural oak.
There are numerous function elements for drawers and pull-
outs available to choose from. The system can be individually ar-
ranged but can also be conveniently ordered as a pre-configured
set.

Combo for drawers The principle of Combo is very simple. Two U-profiles are in-
serted across the entire width of the drawer on a matt black
non-slip mat. Between these profiles and towards the front, two
space dividers hold the profiles in position and form four identi-
cally deep cross compartments (Cupboard depth 58 cm ). Thus
the basic configuration for drawers from 60 cm depth is given.
Smaller widths are equipped with a lengthwise inserted profile.
The basic arrangements can be found as basic sets CBU1 …
and CBU2 … on the following pages.
There are numerous items available as function elements, from
cutlery trays of various types, glass container sets to utensil box-
es and removable foil dispensers. They can be positioned vari-
ably in the basic arrangement. Basic sets, already pre-configured
with function elements, can easily be ordered via the CBSET ….
types. A special feature is the variable space CBPY … for spice
jars or utensils: for this purpose one of the two basic profiles
are shortened so as to provide a generous storage space in the
drawer. The easiest way to order is via the Set-type CBSET ... 4

Combo for pull-outs The pull-outs can also be very flexibly arranged with Combo.
Larger items such as a tray, the Combo bread box or the bread
cutting board, are merely sitting on the matt-black non-slip mat
CBRM ..., that covers the full surface area. The basic set for
pull-outs CBL … B, with which the storage space can be sen-
sibly sub-divided, serves as storage for food. It can also easily
be combined with other items such as bottle inserts or storage
jars. For pull-outs with cookware, our L-profile compartment
CBLU ... with lid-holders that keep the lids fixed to the inside
of the front to minimise noise, is ideally suited.

1/2022 90.01
Combo basic set for drawer boxes
Cupboard depth 36 / 48 / 58 / 68 cm for pullout-/drawer system L3/M3 and M8 (no extra charge)
M8 Special M8 - article variant, extend type with „U“ (Ex.: CBU2 60 58 B U)

Type sketch Description Planning Type Width

Combo drawer box basic set For cupboard depth 36 cm

1 full surface non-slip mat, matt black M8 CBU15036B 50 61
1 U-profile powder coated CBU16036B 60 67
incl. 1 non-slip mat strip, matt black CBU18036B 80 84
1 U-divider CBU19036B 90 96
1 aligning bar CBU110036B 100 97
CBU112036B 120 112

Combo drawer box basic set For cupboard depth 48 cm

1 full surface non-slip mat, matt black M8 CBU13048B 30 36
1 U-profile powder coated CBU14048B 40 37
incl. 1 non-slip mat strip, matt black CBU14548B 45 38

Combo drawer box basic set For cupboard depth 48 cm

1 full surface non-slip mat, matt black M8 CBU25048B 50 85
2 U-profiles powder coated CBU26048B 60 94
incl. 2 non-slip mat strips, matt black CBU28048B 80 120
1 U-divider CBU29048B 90 124
1 aligning bar CBU210048B 100 142
CBU212048B 120 166

Combo hob drawer box basic set For cupboard depth 48 cm

for 6.3 cm frame M8 CBU2N6048B 60 90
1 full surface non-slip mat, matt black CBU2N8048B 80 118
2 U-profiles flat, powder coated CBU2N9048B 90 120
incl. 2 non-slip mat strips, matt black CBU2N10048B 100 139
1 U-divider CBU2N12048B 120 164
1 aligning bar

Combo drawer box basic set For cupboard depth 58 cm

1 full surface non-slip mat, matt black M8 CBU13058B 30 40
1 U-profile powder coated CBU14058B 40 41
incl. 1 non-slip mat strip, matt black CBU14558B 45 42

Combo drawer box basic set For cupboard depth 58 cm

1 full surface non-slip mat, matt black M8 CBU25058B 50 79
2 U-profiles powder coated CBU26058B 60 85
incl. 2 non-slip mat strips, matt black CBU28058B 80 112
2 U-dividers CBU29058B 90 116
CBU210058B 100 127
CBU212058B 120 148

Combo hob drawer box basic set For cupboard depth 58 cm

for 6.3 cm frame M8 CBU2N6058B 60 85
1 full surface non-slip mat, matt black CBU2N8058B 80 95
2 U-profiles flat, powder coated CBU2N9058B 90 107
incl. 2 non-slip mat strips, matt black CBU2N10058B 100 122
2 U-dividers CBU2N12058B 120 146

Combo drawer box basic set For cupboard depth 68 cm

1 full surface non-slip mat, matt black M8 CBU13068B 30 47
1 U-profile powder coated CBU14068B 40 49
incl. 1 non-slip mat strip, matt black CBU14568B 45 50

Combo drawer box basic set For cupboard depth 68 cm

1 full surface non-slip mat, matt black M8 CBU25068B 50 98
2 U-profiles powder coated CBU26068B 60 109
incl. 2 non-slip mat strips, matt black CBU28068B 80 129
2 U-dividers CBU29068B 90 139
2 U-compensation dividers CBU210068B 100 150
CBU212068B 120 173

Combo hob drawer box basic set For cupboard depth 68 cm

for 6.3 cm frame M8 CBU2N6068B 60 103
1 full surface non-slip mat, matt black CBU2N8068B 80 128
2 U-profiles flat, powder coated CBU2N9068B 90 132
incl. 2 non-slip mat strips, matt black CBU2N10068B 100 148
2 U-dividers CBU2N12068B 120 166
2 U-compensation dividers

90.02 1/2022
Combo function elements
for inserting in compartments of the basic sets for pullout-/drawer system L3/M3 and M8 (no extra charge)
M8 Special M8 - article variant, extend type with „U“ (Ex.: CBPY 80 U U)

Type sketch Description Planning Type Width

Combo knife holder The knife holder CBM can also be used in the shallow hob CBM 77
Oak and linoleum drawer, necessary length min. 40 cm.
3 magnetic bars for max. 6 knives
2 little knife rests

Combo foil dispenser The foil holder CBF 2 cannot be placed in the shallow hob CBF2 177
Steel powder coated drawer!
2 removable foil dispensers Length 38 cm

Combo insert with 3 glass jars Length 38 cm CBGD3 70

1 hole insert steel powder coated
3 glass jars 0.25 l with oak lid

Combo insert with 3 glass jars Length 38 cm CBGDN3 69

for 6.3 cm frame
1 hole insert steel powder coated
3 glass jars 0.15 l with oak lid

Combo utensil box Measurements: 11.6 x 11.6 x 5.9 cm CBUD 38

Oak
1 square box with lid

Combo utensil box Measurements: 11.6 x 11.6 x 3.9 cm CBUDN 36

for 6.3 cm frame
Oak
1 square box with lid

Combo cutlery tray oak Length 15 cm CBBE15 24

Oak, steel powder coated Length 20 cm CBBE20 25
1 tray with interior curve Length 25 cm CBBE25 26
CBBE 15 CBBE 20 CBBE 25

Combo cutlery tray oak Length 15 cm CBBEN15 23

for 6.3 cm frame Length 20 cm CBBEN20 24
CBBEN 15 CBBEN 20 CBBEN 25 Oak, steel powder coated Length 25 cm CBBEN25 25
1 shallow tray with interior curve

Combo cutlery tray linoleum Length 15 cm CBBL15 27

Linoleum black, MDF, steel powder coated Length 20 cm CBBL20 28
1 tray with interior curve Length 25 cm CBBL25 29
CBBL 15 CBBL 20 CBBL 25

Combo cutlery tray linoleum Length 15 cm CBBLN15 26

for 6.3 cm frame Length 20 cm CBBLN20 27
CBBLN 15 CBBLN 20 CBBLN 25 Linoleum black, MDF, steel powder coated Length 25 cm CBBLN25 28
1 shallow tray with interior curve

Combo U-divider Measurements: 15.0 x 11.6 x 5 cm CBU15 16

Steel powder coated
1 folded sheet metal for subdivision of the
transverse U-profiles
incl. 1 non-slip mat strip, matt black

Combo U-divider Measurements: 15.0 x 11.6 x 3.5 cm CBUN15 15

for 6.3 cm frame
Steel powder coated
1 folded sheet metal for subdivision of the
transverse U-profiles
incl. 1 non-slip mat strip, matt black

Combo insert for spice mills Length 38 cm CBGM 25

1 insert steel for up to 4 spice mills
CBGML, powder coated

Combo spice mills CBGML2 30

Set of 2 spice mills

Combo spice jars and The items of type CBPY .. are exchanged for a CBPY80U 146
utensil tray U-profile of the corresponding basic set. M8 CBPY90U 148
1 tray 38 x 35.6 cm, CBPY100U 151
with pyramidal surface texture CBPY120U 157
in oak
incl. 1 connection angle powder coated
1 U-profile section powder coated
incl. 1 non-slip mat strip, matt black

1/2022 90.03
Combo for pullouts
for pullout-/drawer system L3/M3 and M8 (no extra charge)
M8 Special M8 - article variant, extend type with „U“ (Ex.: CBL 60 58 B U)

Type sketch Description Planning Type Width

Combo pullout basic set For cupboard depth 58 cm

1 full surface non-slip mat, matt black M8 CBL6058B 60 109
1 L-profile compartment in aluminium powder CBL8058B 80 124
coated CBL9058B 90 131
1 U-divider for L-profile compartment
1 compartment divider for the area For cupboard depth 68 cm
behind L-profile compartment CBL6068B 60 120
all incl. non-slip mats strips matt black CBL8068B 80 136
CBL9068B 90 144

Combo pullout basic set For cupboard depth 58 cm

1 full surface non-slip mat, matt black M8 CBL10058B 100 197
1 L-profile compartment in aluminium powder CBL12058B 120 211
coated
2 U-dividers for L-profile compartment For cupboard depth 68 cm
2 compartment dividers for the area CBL10068B 100 218
behind L-profile compartment CBL12068B 120 233
all incl. non-slip mats strips matt black

Combo non-slip mat For cupboard depth 58 cm

Full surface non-slip matt black CBRM3058 30 7
CBRM4058 40 8
M8 CBRM4558 45 8
CBRM5058 50 8
CBRM6058 60 10
CBRM8058 80 15
CBRM9058 90 17
CBRM10058 100 24
CBRM12058 120 26

For cupboard depth 68 cm

CBRM3068 30 8
CBRM4068 40 9
CBRM4568 45 10
CBRM5068 50 11
CBRM6068 60 14
CBRM8068 80 20
CBRM9068 90 22
CBRM10068 100 30
CBRM12068 120 33

Combo L-profile compartment For dividing the pullout. CBL30 30 25

1 L-profile compartment in aluminium powder Installation behind the front on pullout floor. M8 CBL40 40 31
coated Possible use as insert elements: U-divider CBLU 24, CBL45 45 35
incl. 1 non-slip mat strip, matt black lid holder CBLDH .., storage jar sets CBVD .. and CBL50 50 37
bottle insert CBLF. CBL60 60 41
CBL80 80 53
CBL90 90 58
CBL100 100 64
CBL120 120 76

Combo U-divider for L-profile Length 24 cm CBLU24 24

compartment
Steel powder coated
1 folded sheet metal for subdivision
incl. 1 non-slip mat strip, matt black

Combo compartment divider behind Length 36 cm CBLFT58 45

L-profile compartment Length 46 cm CBLFT68 54
1 compartment divider for the area To be used only in combination with L-profile compartment.
behind L-profile compartment

Combo lid holder for L-profile CBLDH60 60 94

compartment M8 CBLDH80 80 102
1 grooved insert in oak for L-profile CBLDH90 90 112
compartment CBLDH100 100 123
1 elastic band and felt strip to secure CBLDH120 120 158
lids to the front

Combo bottle insert for L-profile Length 38 cm CBLF3 53

compartment
1 insert for 3 bottles

90.04 1/2022
Combo for pullouts
for pullout-/drawer system L3/M3 and M8 (no extra charge)
M8 Special M8 - article variant, extend type with „U“ (Ex.: CBL 60 58 B U)

Type sketch Description Planning Type Width

Combo container box Measurements: 24 x 12 x 13 cm CBC1224 66

1 container box in aluminium powder coated, Measurements: 24 x 16 x 13 cm CBC1624 71
handle in oak
CBC 12 24 CBC 16 24

Combo plate holder Height 16 cm CBTH 77

1 plate holder steel powder coated and
rods in oak, adjustable to plate diameter

Combo storage jar set Length 38 cm, height 16.3 cm CBVD348 76

1 hole insert steel powder coated The storage jar set corresponds to the depth of the pullout
3 glass storage jars 1 l with oak lid and is therefore not compatible with the L-profile compart-
ment CBL .., it can however be used transversely in the
L-profile compartment CBL .. .

Combo storage jar set Length 48 cm, height 16.3 cm CBVD458 95

1 hole insert steel powder coated The storage jar set corresponds to the depth of the pullout
4 glass storage jars 1 l with oak lid and is therefore not compatible with the L-profile compart-
ment CBL .., it can however be used transversely in the
L-profile compartment CBL .. .

Combo storage jar set Length 58 cm, height 16.3 cm CBVD568 129
1 hole insert steel powder coated The storage jar set corresponds to the depth of the pullout
5 glass storage jars 1 l with oak lid and is therefore not compatible with the L-profile compart-
ment CBL .., it can however be used transversely in the
L-profile compartment CBL .. .

Combo cutting board Measurements: 48 x 24 x 5.5 cm CBSB 175

1 cutting board oak

Combo bread cutting board Measurements: 48 x 24 x 5 cm CBBSB 175

1 bread cutting board oak, steel powder coated

Combo tray Measurements: 48 x 24 x 5 cm CBTL 109

1 tray, frame in oak/aluminium powder coated,
floor linoleum

Combo bread box with lid Measurements: 36 x 36 x 18.2 cm CBBB 484

1 bread box in ceramic anthracite with
oak-floor and -lid

1/2022 90.05
Combo drawer-sets
for pullout-/drawer system L3/M3 and M8
Sets for the crossbar system M8 have a “U” at the end of the type (Ex.: CBSET 60 58 1 U)

Carcase depth 56 cm
Width:
Set 1 Set 2 Set 3 Set 4

30

CBSET 30 58 1 CBSET 30 58 2 CBSET 30 58 3

40

CBSET 40 58 1 CBSET 40 58 2 CBSET 40 58 3

45

CBSET 45 58 1 CBSET 45 58 2 CBSET 45 58 3

50

CBSET 50 58 1 CBSET 50 58 2 CBSET 50 58 3

60

CBSET 60 58 1 CBSET 60 58 2 CBSET 60 58 3

80

CBSET 80 58 1 CBSET 80 58 2 CBSET 80 58 3 CBSET 80 58 4

90

CBSET 90 58 1 CBSET 90 58 2 CBSET 90 58 3 CBSET 90 58 4

100

CBSET 100 58 1 CBSET 100 58 2 CBSET 100 58 3 CBSET 100 58 4

120

CBSET 120 58 1 CBSET 120 58 2 CBSET 120 58 3 CBSET 120 58 4

90.06 1/2022
Combo drawer-sets
for pullout-/drawer system L3/M3 and M8 (no extra charge)
M8 Special M8 - article variant, extend type with „U“ (Ex.: CBSET 60 58 1 U)

Type sketch Description/Planning Type Width

Combo drawer-set 1 For cupboard depth 58 cm

30 1x cutlery tray CBBE 25 M8 CBSET30581 30 60
40 1x cutlery tray CBBE 25 CBSET40581 40 61
45 1x cutlery tray CBBE 25 CBSET45581 45 62
50 2x cutlery tray CBBE 20, 2x CBBE 15 CBSET50581 50 151
60 3x cutlery tray CBBE 25, 2x CBBE 15, 1x utensil box CBUD CBSET60581 60 219
80 4x cutlery tray CBBE 25, 2x CBBE 15, 1x utensil box CBUD CBSET80581 80 260
90 3x cutlery tray CBBE 25, 3x CBBE 20, 1x CBBE 15, 1x utensil box CBUD CBSET90581 90 283
100 3x cutlery tray CBBE 25, 3x CBBE 20, 1x CBBE 15, 1x utensil box CBUD CBSET100581 100 300
120 4x cutlery tray CBBE 25, 2x CBBE 20, 2x CBBE 15, 2x utensil box CBUD CBSET120581 120 371

1 basic equipment

Combo drawer-set 2 For cupboard depth 58 cm

30 1x knife holder CBM M8 CBSET30582 30 106
40 1x knife holder CBM CBSET40582 40 108
45 1x knife holder CBM CBSET45582 45 109
50 1x knife holder CBM, 1x insert for spice mills CBGM, 2x spice mills CBGML 2 CBSET50582 50 226
60 1x knife holder CBM, 1x insert for spice mills CBGM, 2x spice mills CBGML 2 CBSET60582 60 232
80 1x knife holder CBM, 1x insert for spice mills CBGM, 2x spice mills CBGML 2 CBSET80582 80 254
90 1x knife holder CBM, 1x insert for spice mills CBGM, 2x spice mills CBGML 2, CBSET90582 90 322
1x insert with 3 glass jars CBGD 3
100 1x knife holder CBM, 1x insert for spice mills CBGM, 2x spice mills CBGML 2, CBSET100582 100 339
1x insert with 3 glass jars CBGD 3
120 1x knife holder CBM, 1x insert for spice mills CBGM, 2x spice mills CBGML 2, CBSET120582 120 356
1x insert with 3 glass jars CBGD 3

1 basic equipment

Combo drawer-set 3 For cupboard depth 58 cm

30 1x foil dispenser CBF 2 M8 CBSET30583 30 225
40 1x foil dispenser CBF 2 CBSET40583 40 226
45 1x foil dispenser CBF 2 CBSET45583 45 227
50 1x foil dispenser CBF 2, 1x utensil box CBUD CBSET50583 50 300
60 1x foil dispenser CBF 2, 1x utensil box CBUD CBSET60583 60 304
80 1x foil dispenser CBF 2, 1x utensil box CBUD CBSET80583 80 328
90 1x foil dispenser CBF 2, 1x utensil box CBUD, 1x insert with 3 glass jars CBGD 3 CBSET90583 90 395
100 1x foil dispenser CBF 2, 1x utensil box CBUD, 1x insert with 3 glass jars CBGD 3 CBSET100583 100 411
120 1x foil dispenser CBF 2, 1x utensil box CBUD, 1x insert with 3 glass jars CBGD 3 CBSET120583 120 430

1 basic equipment

Combo drawer-set 4 For cupboard depth 58 cm

80 1x spice jars and utensil tray CBPY 80 U M8 CBSET80584 80 209
90 1x spice jars and utensil tray CBPY 90 U, 1x insert with 3 glass jars CBGD 3 CBSET90584 90 276
100 1x spice jars and utensil tray CBPY 100 U, 1x insert with 3 glass jars CBGD 3, CBSET100584 100 321
1x utensil box CBUD
120 1x spice jars and utensil tray CBPY 120 U, 1x insert with 3 glass jars CBGD 3, CBSET120584 120 342
1x utensil box CBUD

1 basic equipment

Combo drawer-set 1 to 4 for depth 68 cm

The sets described above are available with depth adjustment part for the depth of 68 cm at extra
charge of 22 HLP.
With this type, replace the depth measurement 58 with 68.
Example: CBSET 60 58 1 = for depth 58 cm
CBSET 60 68 1 = for depth 68 cm

1/2022 90.07
Q-Box / Q-Vario
for pullout-/drawer system L3/M3

Interior arrangement A modular equippable interior arrangement of drawers and in praxis Q-Box describes the variable organisation in drawers,
pullouts, sophisticated in design and material, enhances any Q-Vario the functional division of the pullouts.
kitchen. Under the name “Q-Box / Q-Vario”, we present an el-
egant and well developed organisation system for drawers and
pullouts. Unadorned and of high quality in appearance, flexible

Q-Box for drawers

The Q-Box cutlery tray of solid oak has form-fitting, hard-elastic The Q-Box module inserts are available in all carcase depths and
profile trays in carbon-look. They are cushioning and prevent in the planning widths of 30 cm, 40 cm, 45 cm, 50 cm and 60
sliding at the same time. Particularly attractive and elegant is cm. The furnishing of wider drawers will consist of these widths
the raised flush material transition from profile tray to wooden and an additional connection piece. The added planning widths
level. The profile trays are removable for easy cleaning. Function of the Q-Box inserts are determined by the planning width of
elements such as knife block and foil holder can be optionally the drawer (the connection piece is not included in the addi-
inserted. The range also includes tightly closing porcelain con- tion).
tainer sets of 5 or 10 pieces.
Combination example for drawer with 100 cm:
EBF 40 58 + EBVS 58 + EBF 60 58 = 100 cm planning width
EBF 50 58 + EBVS 58 + EBF 50 58 = 100 cm planning width

Q-Vario for pullouts

Perforated grid plates in all planning widths from 50 cm – 120 In addition, a felt covered compartment for lids or cutting
cm and dividing boards are used in the Q-Vario arrangement. boards is available along the reverse side of the front. Further
If required, the grid holes can be covered with enclosed anti- functions available: bottle holders, plate holders and glass jars.
slipmats, e.g. for prevention of sliding of pots and pans.

90.08 1/2022
Q-Box for drawers
Cutlery trays for pullout-/drawer system L3/M3

Type sketch Description Planning Type Width

Cutlery tray Optional stocking with foil elements For cupboard depth 58 cm
solid oak wood or knife holder possible. EBF3058 30 74
with plastic floor mat EBF4058 40 102
EBF4558 45 103
Division varies with widths. EBF5058 50 107
For widths from 80 cm with connecting EBF6058 60 129
piece in oak. EBF8058 80 204
EBF9058 90 229
EBF 30 58 EBF 40 58 EBF 45 58 EBF 50 58 EBF 60 58 EBF 80 58 EBF10058 100 253
167 * * * EBF12058 120 281

479
306

EBF 90 58 EBF 100 58 EBF 120 58

* * * *

EBF ... 48 EBF ... 36

94 *
94
379
279 279
179

Cutlery tray Optional stocking with foil elements For cupboard depth 68 cm
solid oak wood or knife holder possible. EBF3068 30 93
with plastic floor mat EBF4068 40 121
1 depth adjustment part EBF4568 45 125
EBF5068 50 131
Division varies with widths. EBF6068 60 158
For widths from 80 cm with connecting EBF8068 80 234
piece in oak. EBF9068 90 264
EBF10068 100 288
EBF 30 68 EBF 40 68 EBF 45 68 EBF 50 68 EBF 60 68 EBF 80 68 EBF12068 120 321
94

167 * * *
579
306

EBF 90 68 EBF 100 68 EBF 120 68

* * * *

Foil element To be put into fields marked with *. EBFF 116

solid oak wood Not for cupboard depth 36 cm.
3 foil compartments Not for 6.3 cm high drawers.
metal flap with tear-off edge Not for cupboard depth of 48 cm at CONTINO.
for putting into 50 or 60 cm
cutlery trays

Knife holder To be put into fields marked with *. EBFM 89

solid oak wood Not for cupboard depth 36 cm.
for 6 knives Not for 6.3 cm high drawers.
for putting into 50 or 60 cm
cutlery trays

1/2022 90.09
Q-Box for drawers
Cutlery trays modular for pullout-/drawer system L3/M3

Type sketch Description Planning Type Width

EBVS Drawers from 80 cm width can be fitted individually

EBFM 50 58 EBF 40 58 with cutlery trays and various function elements.
The combination always requires a connection piece,
EBVS or EBVS 5P, for linking two cutlery or
porcelain jar inserts.
66 cm deep drawers need an additional depth
adjustment part EBFA ... 68 in full planning width.

EBF 50 58 EBF 60 58
EBF 40 58 EBF 45 58
EBF 30 58

Cutlery tray with 3 foil Not for 6.3 cm high drawers. For cupboard depth 58 and 68 cm
storage compartments EBFF5058 50 216
solid oak wood EBFF6058 60 240
with plastic floor mat
For cupboard depth 48 cm
EBFF5048 50 216
EBFF6048 60 240

Cutlery tray with knife holder Not for 6.3 cm high drawers. For cupboard depth 58 and 68 cm
solid oak wood EBFM5058 50 189
with plastic floor mat EBFM6058 60 212

For cupboard depth 48 cm

EBFM5048 50 189
EBFM6048 60 212

Insert with 10 porcelain jars Not for 6.3 cm high drawers. For cupboard depth 58 cm
in oak EB305810P 30 262

For cupboard depth 68 cm

EB306810P 30 278

Insert for spice jars Not for 6.3 cm high drawers. For cupboard depth 58 cm
in oak EB3058G 30 54
for standard spice jars
For cupboard depth 68 cm
EB3068G 30 71

Set of porcelain jars EB5P 104

5 porcelain jars with lid

Connecting piece For cupboard depth 58 and 68 cm

in oak EBVS58 23
for coupling two cutlery trays

Connecting piece with Not for 6.3 cm high drawers. For cupboard depth 68 cm
5 porcelain jars EBVS5P 145
in oak
for coupling two cutlery trays

For 68 cm depth, order additional EBFA .. 68.

90.10 1/2022
Q-Box for drawers
Cutlery trays modular for pullout-/drawer system L3/M3

Type sketch Description Planning Type Width

Depth adjustment part Essential for drawers of depth 68 cm. For cupboard depth 68 cm
in oak EBFA3068 30 23
EBFA4068 40 25
EBFA4568 45 29
EBFA5068 50 30
EBFA6068 60 33
EBFA8068 80 37
EBFA9068 90 41
EBFA10068 100 42
EBFA12068 120 47

Q-Vario for pullouts

for pullout-/drawer system L3/M3

Type sketch Description Planning Type Width

Vario insert base For cupboard depth 58 cm

oak wood veneer base with grid holes EBG5058 50 53
and anti slip pads EBG6058 60 59
EBG8058 80 90
EBG9058 90 97
EBG10058 100 103
EBG12058 120 125

For cupboard depth 68 cm

EBG5068 50 67
EBG6068 60 75
EBG8068 80 100
EBG9068 90 117
EBG10068 100 133
EBG12068 120 158

Vario insert for stock

oak wood veneer base with grid holes
and anti slip pads
flexibly adjustable dividing boards of
solid oak wood

EBV 50 58 EBV 60 58 EBV 80 58 EBV 90 58 For cupboard depth 58 cm

EBV5058 50 125
EBV6058 60 142
EBV8058 80 222
EBV9058 90 232
EBV10058 100 244
EBV12058 120 321

EBV 100 58 EBV 120 58

EBV 50 68 EBV 60 68 EBV 80 68 EBV 90 68 For cupboard depth 68 cm

EBV5068 50 138
EBV6068 60 170
EBV8068 80 251
EBV9068 90 261
EBV10068 100 231
EBV12068 120 272

EBV 100 68 EBV 120 68

1/2022 90.11
Q-Vario for pullouts
for pullout-/drawer system L3/M3

Type sketch Description Planning Type Width

Vario insert for pots For cupboard depth 58 cm

oak wood veneer base with grid holes EBT5058 50 121
and anti slip pads EBT6058 60 139
felt lined tray for lids EBT8058 80 181
EBT9058 90 198
EBT10058 100 209
EBT12058 120 248

For cupboard depth 68 cm

EBT5068 50 137
EBT6068 60 153
EBT8068 80 201
EBT9068 90 218
EBT10068 100 274
EBT12068 120 359

Bottle insert For optional placement in For cupboard depth 58 cm

for 5 (carcase depth 56 cm) or vario inserts EBG .. or EBV .. . EBFL58 55
6 bottles (carcase depth 66 cm)
2 pieces For cupboard depth 68 cm
EBFL68 59

Storage glass insert For optional placement in For cupboard depth 58 cm

with 3 (carcase depth 56 cm) or vario inserts EBG .. or EBV .. . EBEDO58 125
4 containers (carcase depth 66 cm)
content per jar 1.2 litres For cupboard depth 68 cm
EBEDO68 152

Plate insert EBS4 28

4 flexibly usable intermediate divisions

Container EB1423C 71
1 container in oak
22.6 x 14 x 10.8 cm

Container EB1923C 78
1 container in oak
22.6 x 19 x 10.8 cm

Bread bin Only for pullouts from width 45 cm. BKTE 183
1 bread box of clay For carcase depth 56 and 66 cm.
1 oak covering panel

90.12 1/2022
Beech equipment
for pullout-/drawer system L3/M3

Drawer variants

Solid wood cutlery insert with compartment for foils Solid wood cutlery insert with knife holder

Pullout variants

Solid wood vario insert HBT... Solid wood plate insert HBV...

Solid wood spice jar insert HBARDO

1/2022 90.13
Beech equipment for drawers
Cutlery trays for pullout-/drawer system L3/M3

Type sketch Description Planning Type Width

Cutlery tray Division varies with widths.

solid beech wood

HBF 30 58 HBF 40 58 HBF 45 58 HBF 50 58 HBF 60 58 HBF 80 58 For cupboard depth 58 cm

HBF3058 30 60
HBF4058 40 68
HBF4558 45 71
HBF5058 50 78
HBF6058 60 88
HBF8058 80 133
HBF9058 90 141
HBF 90 58 HBF 100 58 HBF 120 58
HBF10058 100 153
HBF12058 120 165

Cutlery tray Division varies with widths.

with compartment for foils
solid beech wood
2 foil compartments
foil compartment lid with
serrated stainless steel cutting edge

HBFF 40 58 HBFF 45 58 HBFF 50 58 HBFF 60 58 HBFF 80 58 For cupboard depth 58 cm

HBFF4058 40 93
HBFF4558 45 101
HBFF5058 50 108
HBFF6058 60 115
HBFF8058 80 160
HBFF9058 90 170
HBFF10058 100 182
HBFF 90 58 HBFF 100 58 HBFF 120 58
HBFF12058 120 196

Cutlery tray Division varies with widths.

with knife holder
solid beech wood

HBFM 40 58 HBFM 45 58 HBFM 50 58 HBFM 60 58 HBFM 80 58 For cupboard depth 58 cm

HBFM4058 40 99
HBFM4558 45 101
HBFM5058 50 103
HBFM6058 60 112
HBFM8058 80 142
HBFM9058 90 147
HBFM10058 100 154
HBFM 90 58 HBFM 100 58 HBFM 120 58
HBFM12058 120 167

Connecting piece For drawers 80, 90, 100 or 120 cm For cupboard depth 58 cm
for coupling two cutlery trays width as coupling piece for solid HBVS58 26
solid beech wood wood cutlery trays.
Combination examples
Drawers 80 cm:
2x 40 cm or 30 + 50 cm
Drawers 90 cm:
2x 45 cm or 40 + 50 cm
Drawers 100 cm:
2x 50 cm or 40 + 60 cm
Drawers 120 cm:
2x 60 cm

90.14 1/2022
Beech equipment for drawers
Cutlery trays for pullout-/drawer system L3/M3

Type sketch Description Planning Type Width

Knife holder insert For cupboard depth 58 cm

for combination with one cutlery tray HBAM2058 20 93
solid beech wood

Beech equipment for pullouts

for pullout-/drawer system L3/M3

Type sketch Description Planning Type Width

Vario insert Only for pullouts.

beech wood veneer base with grid holes
and flexibly adjustable divisions of
solid beech wood

HBT 50 58 HBT 60 58 HBT 80 58 HBT 90 58 For cupboard depth 58 cm

HBT5058 50 105
HBT6058 60 115
HBT8058 80 126
HBT9058 90 200
HBT10058 100 207
HBT12058 120 225

HBT 100 58 HBT 120 58

Plate insert Only for pullouts. For cupboard depth 58 cm

beech wood veneer base with grid holes 16 HBV plugs HBV5058 50 97
and flexibly adjustable dividers of 16 HBV plugs HBV6058 60 101
solid beech wood 20 HBV plugs HBV8058 80 130
24 HBV plugs HBV9058 90 145
28 HBV plugs HBV10058 100 167
32 HBV plugs HBV12058 120 194

Plate holder For pullouts from 40 cm width and 40 cm height. For cupboard depth 58 cm
solid beech wood HBTH58 51
Width 26 cm, height 9 cm
for 22 plates

Spice jar insert Length divider for Z2 pullouts, For cupboard depth 58 cm
beech veneer base to be used right or left. HBARDO58 122
Width 17.3 cm, height 5 cm,
depth 47.9 cm
incl. 3 metal aroma jars
diameter 12.5 cm, height 19 cm
holds 1.5 litres

Bread bin Only for pullouts from width 45 cm. BKTB 183
1 bread box of clay For carcase depth 56 and 66 cm.
1 beech covering panel

1/2022 90.15
L-Box in oak
for pullout-/drawer system L3/M3 and M8

Interior arrangement L-Box is a arrangement system in natural lacquered oak for par-
tial equipment of drawers and pullouts. The L-Box elements are
spaced on a rubbery-moss anti-slip mat, resulting in a lively col-
our and material match between the wood surface and of the
slightly textured mat.

L-Box for drawers

L-Box for pullouts

90.16 1/2022
L-Box in walnut
for pullout-/drawer system L3/M3 and M8

Interior arrangement L-Box is a arrangement system in natural lacquered walnut for

partial equipment of drawers and pullouts. The L-Box elements
are spaced on a rubbery-moss anti-slip mat, resulting in a lively
colour and material match between the wood surface and of
the slightly textured mat.

L-Box for drawers

1/2022 90.17
L-Box in oak for drawers and pullouts
Cutlery trays modular for pullout-/drawer system L3/M3 and M8 (no extra charge)
M8 Special M8 - article variant, extend type with „U“ (Ex.: LBFA 60 68 U)

Type sketch Description Planning Type Width

L-Box cutlery tray For cupboard depth 36 cm

solid oak wood 30 x 29.7 x 4.3 cm LBF36 34

For cupboard depth 48 cm

30 x 37.9 x 4.3 cm LBF48 40

For cupboard depth 58 and 68 cm

30 x 47.9 x 4.3 cm LBF58 50

L-Box bowl For cupboard depth 36 cm

solid oak wood 15 x 29.7 x 4.3 cm LBFU36 28

For cupboard depth 48 cm

15 x 37.9 x 4.3 cm LBFU48 28

For cupboard depth 58 and 68 cm

15 x 47.9 x 4.3 cm LBFU58 28

L-Box foil dispenser For cupboard depth 48 cm

solid oak wood 15 x 37.9 x 4.8 cm LBFF48 61
2 foil compartments
metal flap with tear-off edge For cupboard depth 58 and 68 cm
15 x 47.9 x 4.8 cm LBFF58 61

L-Box knife holder For cupboard depth 48 cm

solid oak wood 15 x 37.9 x 4.3 cm LBFM48 47
for 5 knives
For cupboard depth 58 and 68 cm
15 x 47.9 x 4.3 cm LBFM58 47

L-Box spice tray For cupboard depth 48 cm

solid oak wood 15 x 37.9 x 4.3 cm LBFG48 48
for standard spice jars
For cupboard depth 58 and 68 cm
15 x 47.9 x 4.3 cm LBFG58 51

L-Box bowl for small items For cupboard depth 58 and 68 cm

solid oak wood 15 x 47.9 x 4.3 cm LBFK58 40
with 6 compartments

Depth adjustment part Essential for drawers of depth 68 cm. For cupboard depth 68 cm
in oak Please state the required width in the type. LBFA..68 29
Width 30 - 120 cm Example LBFA 60 68
M8

L-Box container Can also be used as a second level with L-Box container LBFC1 31
solid oak wood LBFC 2 and LBFC 3.
24 x 24 x 4.3 cm

L-Box container Only for pullouts. LBFC2 53

solid oak wood
24 x 24 x 11 cm

L-Box container Only for pullouts. LBFC3 80

solid oak wood
24 x 47.9 x 11 cm

Order an additional anti slip mat in the appropriate drawer size.

For 68 cm depth, order additional LBFA .. 68.

90.18 1/2022
L-Box in walnut for drawers and pullouts
Cutlery trays modular for pullout-/drawer system L3/M3 and M8 (no extra charge)
M8 Special M8 - article variant, extend type with „U“ (Ex.: LBNA 60 68 U)

Type sketch Description Planning Type Width

L-Box cutlery tray For cupboard depth 36 cm

solid walnut 30 x 29.7 x 4.3 cm LBN36 60

For cupboard depth 48 cm

30 x 37.9 x 4.3 cm LBN48 70

For cupboard depth 58 and 68 cm

30 x 47.9 x 4.3 cm LBN58 88

L-Box bowl For cupboard depth 36 cm

solid walnut 15 x 29.7 x 4.3 cm LBNU36 49

For cupboard depth 48 cm

15 x 37.9 x 4.3 cm LBNU48 49

For cupboard depth 58 and 68 cm

15 x 47.9 x 4.3 cm LBNU58 49

L-Box foil dispenser For cupboard depth 48 cm

solid walnut 15 x 37.9 x 4.8 cm LBNF48 108
2 foil compartments
metal flap with tear-off edge For cupboard depth 58 and 68 cm
15 x 47.9 x 4.8 cm LBNF58 108

L-Box knife holder For cupboard depth 48 cm

solid walnut 15 x 37.9 x 4.3 cm LBNM48 82
for 5 knives
For cupboard depth 58 and 68 cm
15 x 47.9 x 4.3 cm LBNM58 82

L-Box spice tray For cupboard depth 48 cm

solid walnut 15 x 37.9 x 4.3 cm LBNG48 84
for standard spice jars
For cupboard depth 58 and 68 cm
15 x 47.9 x 4.3 cm LBNG58 90

L-Box bowl for small items For cupboard depth 58 and 68 cm

solid walnut 15 x 47.9 x 4.3 cm LBNK58 70
with 6 compartments

Depth adjustment part Essential for drawers of depth 68 cm. For cupboard depth 68 cm
in walnut Please state the required width in the type. LBNA3068 51
Width 30 - 120 cm Example LBNA 60 68
M8

L-Box container Can also be used as a second level with L-Box container LBNC1 55
solid walnut LBNC 2 and LBNC 3.
24 x 24 x 4.3 cm

L-Box container Only for pullouts. LBNC2 93

solid walnut
24 x 24 x 11 cm

L-Box container Only for pullouts. LBNC3 141

solid walnut
24 x 47.9 x 11 cm

Order an additional anti slip mat in the appropriate drawer size.

For 68 cm depth, order additional LBNA .. 68.

1/2022 90.19
L-Box in oak drawer-sets
for pullout-/drawer system L3/M3 and M8
Sets for the crossbar system M8 have a “U” at the end of the type (Ex.: LBFS 60 58 1 U)

Carcase depth 56 cm
Width: Set 1 Set 2 Set 3 Set 4

30
LBFS 30 58 1 LBFS 30 58 2 LBFS 30 58 3 LBFS 30 58 4

40
LBFS 40 58 1 LBFS 40 58 2 LBFS 40 58 3 LBFS 40 58 4

45
LBFS 45 58 1 LBFS 45 58 2 LBFS 45 58 3 LBFS 45 58 4

50
LBFS 50 58 1 LBFS 50 58 2 LBFS 50 58 3 LBFS 50 58 4

60
LBFS 60 58 1 LBFS 60 58 2 LBFS 60 58 3 LBFS 60 58 4

80
LBFS 80 58 1 LBFS 80 58 2 LBFS 80 58 3 LBFS 80 58 4

90
LBFS 90 58 1 LBFS 90 58 2 LBFS 90 58 3 LBFS 90 58 4

100
LBFS 100 58 1 LBFS 100 58 2 LBFS 100 58 3 LBFS 100 58 4

120
LBFS 120 58 1 LBFS 120 58 2 LBFS 120 58 3 LBFS 120 58 4

Modular cutlery inserts: Base parts oak 1 cutlery insert anti-slip mat
2 bowl
3 spice tray
4 knife holder
5 bowl for small items
1 2 3 4 5 6 6 foil dispenser
Note:
The listing is valid for carcase depth 56 cm.
Sets for carcase depth 66 cm have in addition a depth compensation part LBF A .. 68 in the appropriate width.

90.20 1/2022
L-Box in oak drawer-sets
for pullout-/drawer system L3/M3 and M8 (no extra charge)
M8 Special M8 - article variant, extend type with „U“ (Ex.: LBFS 60 58 1 U)

Type sketch Description/Planning Type Width

L-Box drawer-set 1 For cupboard depth 58 cm

30 1x bowl for small items LBFK 58 M8 LBFS30581 30 46
40 1x cutlery tray LBF 58 LBFS40581 40 58
45 1x cutlery tray LBF 58 LBFS45581 45 58
50 1x cutlery tray LBF 58 LBFS50581 50 60
60 1x cutlery tray LBF 58, 1x bowl for small items LBFK 58 LBFS60581 60 100
80 1x cutlery tray LBF 58, 1x bowl for small items LBFK 58 LBFS80581 80 107
90 1x cutlery tray LBF 58, 1x bowl for small items LBFK 58, 1x bowl LBFU 58 LBFS90581 90 135
100 1x cutlery tray LBF 58, 1x bowl for small items LBFK 58, 1x bowl LBFU 58 LBFS100581 100 142
120 2x cutlery tray LBF 58, 1x bowl for small items LBFK 58 LBFS120581 120 164

Every set contains an anti slip mat either in colour KF 160 silver grey or in KF 161 carbon and in the size
of the respective drawer.

L-Box drawer-set 2 For cupboard depth 58 cm

30 1x knife holder LBFM 58 M8 LBFS30582 30 53
40 1x knife holder LBFM 58 LBFS40582 40 55
45 1x knife holder LBFM 58, 1x bowl LBFU 58 LBFS45582 45 83
50 1x knife holder LBFM 58, 1x bowl LBFU 58 LBFS50582 50 85
60 1x knife holder LBFM 58, 1x cutlery tray LBF 58 LBFS60582 60 107
80 1x knife holder LBFM 58, 1x cutlery tray LBF 58 LBFS80582 80 114
90 1x knife holder LBFM 58, 1x cutlery tray LBF 58, 1x bowl for small items LBFK 58 LBFS90582 90 154
100 1x knife holder LBFM 58, 1x cutlery tray LBF 58, 1x bowl for small items LBFK 58 LBFS100582 100 161
120 1x knife holder LBFM 58, 2x cutlery tray LBF 58 LBFS120582 120 172

Every set contains an anti slip mat either in colour KF 160 silver grey or in KF 161 carbon and in the size
of the respective drawer.

L-Box drawer-set 3 For cupboard depth 58 cm

30 1x spice tray LBFG 58 M8 LBFS30583 30 57
40 1x spice tray LBFG 58 LBFS40583 40 59
45 1x spice tray LBFG 58, 1x bowl for small items LBFK 58 LBFS45583 45 99
50 1x spice tray LBFG 58, 1x bowl for small items LBFK 58 LBFS50583 50 101
60 1x spice tray LBFG 58, 1x cutlery tray LBF 58 LBFS60583 60 111
80 1x spice tray LBFG 58, 1x cutlery tray LBF 58 LBFS80583 80 119
90 1x spice tray LBFG 58, 1x cutlery tray LBF 58, 1x bowl for small items LBFK 58 LBFS90583 90 158
100 1x spice tray LBFG 58, 1x cutlery tray LBF 58, 1x bowl for small items LBFK 58 LBFS100583 100 165
120 1x spice tray LBFG 58, 1x cutlery tray LBF 58, 1x bowl for small items LBFK 58 LBFS120583 120 165

Every set contains an anti slip mat either in colour KF 160 silver grey or in KF 161 carbon and in the size
of the respective drawer.

L-Box drawer-set 4 For cupboard depth 58 cm

30 1x foil dispenser LBFF 58 M8 LBFS30584 30 68
40 1x foil dispenser LBFF 58 LBFS40584 40 70
45 1x foil dispenser LBFF 58, 1x bowl for small items LBFK 58 LBFS45584 45 109
50 1x foil dispenser LBFF 58, 1x bowl for small items LBFK 58 LBFS50584 50 111
60 1x foil dispenser LBFF 58, 1x cutlery tray LBF 58 LBFS60584 60 122
80 1x foil dispenser LBFF 58, 1x cutlery tray LBF 58 LBFS80584 80 129
90 1x foil dispenser LBFF 58, 1x cutlery tray LBF 58, 1x bowl for small items LBFK 58 LBFS90584 90 168
100 1x foil dispenser LBFF 58, 1x cutlery tray LBF 58, 1x bowl for small items LBFK 58 LBFS100584 100 176
120 1x foil dispenser LBFF 58, 1x cutlery tray LBF 58, 1x bowl for small items LBFK 58 LBFS120584 120 176

Every set contains an anti slip mat either in colour KF 160 silver grey or in KF 161 carbon and in the size
of the respective drawer.

L-Box drawer set 1 to 4 for depth 68 cm

The sets described above are available with depth adjustment part for the depth of 68 cm at extra
charge of 29 HLP.
With this type, replace the depth measurement 58 with 68.
Example: LBFS 60 58 .. = for depth 58 cm
LBFS 60 68 .. = for depth 68 cm

1/2022 90.21
L-Box in walnut drawer-sets
for pullout-/drawer system L3/M3 and M8
Sets for the crossbar system M8 have a “U” at the end of the type (Ex.: LBFS 60 58 1 U)

Carcase depth 56 cm
Width: Set 1 Set 2 Set 3 Set 4

30
LBNS 30 58 1 LBNS 30 58 2 LBNS 30 58 3 LBNS 30 58 4

40
LBNS 40 58 1 LBNS 40 58 2 LBNS 40 58 3 LBNS 40 58 4

45
LBNS 45 58 1 LBNS 45 58 2 LBNS 45 58 3 LBNS 45 58 4

50
LBNS 50 58 1 LBNS 50 58 2 LBNS 50 58 3 LBNS 50 58 4

60
LBNS 60 58 1 LBNS 60 58 2 LBNS 60 58 3 LBNS 60 58 4

80
LBNS 80 58 1 LBNS 80 58 2 LBNS 80 58 3 LBNS 80 58 4

90
LBNS 90 58 1 LBNS 90 58 2 LBNS 90 58 3 LBNS 90 58 4

100
LBNS 100 58 1 LBNS 100 58 2 LBNS 100 58 3 LBNS 100 58 4

120
LBNS 120 58 1 LBNS 120 58 2 LBNS 120 58 3 LBNS 120 58 4

Modular cutlery inserts: Base parts oak 1 cutlery insert anti-slip mat
2 bowl
3 spice tray
4 knife holder
5 bowl for small items
1 2 3 4 5 6 6 foil dispenser
Note:
The listing is valid for carcase depth 56 cm.
Sets for carcase depth 66 cm have in addition a depth compensation part LBN A .. 68 in the appropriate width.

90.22 1/2022
L-Box in walnut drawer-sets
for pullout-/drawer system L3/M3 and M8 (no extra charge)
M8 Special M8 - article variant, extend type with „U“ (Ex.: LBNS 60 58 1 U)

Type sketch Description/Planning Type Width

L-Box drawer-set 1 For cupboard depth 58 cm

30 1x bowl for small items LBNK 58 M8 LBNS30581 30 81
40 1x cutlery tray LBN 58 LBNS40581 40 102
45 1x cutlery tray LBN 58 LBNS45581 45 102
50 1x cutlery tray LBN 58 LBNS50581 50 106
60 1x cutlery tray LBN 58, 1x bowl for small items LBNK 58 LBNS60581 60 176
80 1x cutlery tray LBN 58, 1x bowl for small items LBNK 58 LBNS80581 80 188
90 1x cutlery tray LBN 58, 1x bowl for small items LBNK 58, 1x bowl LBNU 58 LBNS90581 90 238
100 1x cutlery tray LBN 58, 1x bowl for small items LBNK 58, 1x bowl LBNU 58 LBNS100581 100 251
120 2x cutlery tray LBN 58, 1x bowl for small items LBNK 58 LBNS120581 120 289

Every set contains an anti slip mat either in colour KF 160 silver grey or in KF 161 carbon and in the size
of the respective drawer.

L-Box drawer-set 2 For cupboard depth 58 cm

30 1x knife holder LBNM 58 M8 LBNS30582 30 93
40 1x knife holder LBNM 58 LBNS40582 40 97
45 1x knife holder LBNM 58, 1x bowl LBNU 58 LBNS45582 45 146
50 1x knife holder LBNM 58, 1x bowl LBNU 58 LBNS50582 50 150
60 1x knife holder LBNM 58, 1x cutlery tray LBN 58 LBNS60582 60 188
80 1x knife holder LBNM 58, 1x cutlery tray LBN 58 LBNS80582 80 201
90 1x knife holder LBNM 58, 1x cutlery tray LBN 58, 1x bowl for small items LBNK 58 LBNS90582 90 271
100 1x knife holder LBNM 58, 1x cutlery tray LBN 58, 1x bowl for small items LBNK 58 LBNS100582 100 284
120 1x knife holder LBNM 58, 2x cutlery tray LBN 58 LBNS120582 120 302

Every set contains an anti slip mat either in colour KF 160 silver grey or in KF 161 carbon and in the size
of the respective drawer.

L-Box drawer-set 3 For cupboard depth 58 cm

30 1x spice tray LBNG 58 M8 LBNS30583 30 101
40 1x spice tray LBNG 58 LBNS40583 40 104
45 1x spice tray LBNG 58, 1x bowl for small items LBNK 58 LBNS45583 45 174
50 1x spice tray LBNG 58, 1x bowl for small items LBNK 58 LBNS50583 50 178
60 1x spice tray LBNG 58, 1x cutlery tray LBN 58 LBNS60583 60 196
80 1x spice tray LBNG 58, 1x cutlery tray LBN 58 LBNS80583 80 209
90 1x spice tray LBNG 58, 1x cutlery tray LBN 58, 1x bowl for small items LBNK 58 LBNS90583 90 278
100 1x spice tray LBNG 58, 1x cutlery tray LBN 58, 1x bowl for small items LBNK 58 LBNS100583 100 291
120 1x spice tray LBNG 58, 1x cutlery tray LBN 58, 1x bowl for small items LBNK 58 LBNS120583 120 291

Every set contains an anti slip mat either in colour KF 160 silver grey or in KF 161 carbon and in the size
of the respective drawer.

L-Box drawer-set 4 For cupboard depth 58 cm

30 1x foil dispenser LBNF 58 M8 LBNS30584 30 119
40 1x foil dispenser LBNF 58 LBNS40584 40 123
45 1x foil dispenser LBNF 58, 1x bowl for small items LBNK 58 LBNS45584 45 192
50 1x foil dispenser LBNF 58, 1x bowl for small items LBNK 58 LBNS50584 50 196
60 1x foil dispenser LBNF 58, 1x cutlery tray LBN 58 LBNS60584 60 214
80 1x foil dispenser LBNF 58, 1x cutlery tray LBN 58 LBNS80584 80 227
90 1x foil dispenser LBNF 58, 1x cutlery tray LBN 58, 1x bowl for small items LBNK 58 LBNS90584 90 296
100 1x foil dispenser LBNF 58, 1x cutlery tray LBN 58, 1x bowl for small items LBNK 58 LBNS100584 100 309
120 1x foil dispenser LBNF 58, 1x cutlery tray LBN 58, 1x bowl for small items LBNK 58 LBNS120584 120 309

Every set contains an anti slip mat either in colour KF 160 silver grey or in KF 161 carbon and in the size
of the respective drawer.

L-Box drawer set 1 to 4 for depth 68 cm

The sets described above are available with depth adjustment part for the depth of 68 cm at extra
charge of 51 HLP.
With this type, replace the depth measurement 58 with 68.
Example: LBNS 60 58 .. = for depth 58 cm
LBNS 60 68 .. = for depth 68 cm

1/2022 90.23
Plastic equipment
for pullout-/drawer system L3/M3

Drawer variants

Cutlery insert in plastic BFA ... Cutlery insert in plastic BFA ...

Cutlery insert in plastic BFC ...

Electric slicer ASA

90.24 1/2022
Plastic equipment for drawers
Cutlery trays for depth 36, 48, 58 and 68 cm for pullout-/drawer system L3/M3

Type sketch Description Planning Type Width

Cutlery tray per compartment 1 divider For cupboard depth 58 cm

Plastic anthracite BFC3058 30 26
Metal connecting strips black BFC4058 40 31
variable partitioning BFC4558 45 32
BFC5058 50 39
BFC6058 60 42
BFC8058 80 58
BFC9058 90 61
BFC10058 100 66
BFC 30 58 BFC 40 58 BFC 45 58 BFC 50 58 BFC 60 58 BFC 80 58
BFC12058 120 82

9 9 9 9 10 9 9 15 9 9 10 10 15 9 9 15 15 9 9 15 10 10
BFC 90 58 BFC 100 58 BFC 120 58

15 9 9 15 15 15 15 9 9 15 15 15 10 15 9 9 15 15 15 15 15

Cutlery tray per compartment 2 divider For cupboard depth 68 cm

Plastic anthracite BFC3068 30 38
Metal connecting strips black BFC4068 40 42
variable partitioning BFC4568 45 45
BFC5068 50 53
BFC6068 60 56
BFC8068 80 84
BFC9068 90 86
BFC10068 100 92
BFC12068 120 109
BFC 30 68 BFC 40 68 BFC 45 68 BFC 50 68 BFC 60 68 BFC 80 68

9 9 9 9 10 9 9 15 9 9 10 10 15 9 9 15 15 9 9 15 10 10
BFC 90 68 BFC 100 68 BFC 120 68

15 9 9 15 15 15 15 9 9 15 15 15 10 15 9 9 15 15 15 15 15

Cutlery tray-dividers Please note different widths! BFCT9 9 2

for additional requirement BFCT10 10 2
Plastic anthracite BFCT15 15 2

1/2022 90.25
Plastic equipment for drawers
Cutlery trays for depth 58 cm for pullout-/drawer system L3/M3

Type sketch Description Planning Type Width

Cutlery tray with spice tray per compartment 1 divider For cupboard depth 58 cm
Plastic anthracite BFCG6058 60 43
Metal connecting strips black BFCG8058 80 59
variable partitioning BFCG9058 90 61
BFCG10058 100 67
BFCG12058 120 79

BFCG 60 58 BFCG 80 58 BFCG 90 58

9 9 30 9 9 10 10 30 15 9 9 15 30
BFCG 100 58 BFCG 120 58

15 9 9 15 30 10 15 9 9 15 30 15 15

Cutlery tray For cupboard depth 58 cm

plastic BFAN6058 60 13
for 6.3 cm high drawers BFAN8058 80 18
KF = Plastic coloured BFAN9058 90 19
160 silver grey 161 carbon BFAN10058 100 21
BFAN12058 120 25

BFAN 60 58 BFAN 80 58 BFAN 90 58

BFAN 100 58 BFAN 120 58

Cutlery tray For cupboard depth 58 cm

plastic BFA3058 30 10
KF = Plastic coloured BFA4058 40 11
160 silver grey 161 carbon BFA4558 45 11
BFA5058 50 12
BFA6058 60 13
BFA8058 80 18
BFA9058 90 19
BFA10058 100 21
BFA 30 58 BFA 40 58 BFA 45 58 BFA 50 58 BFA 60 58 BFA 80 58 BFA12058 120 25

BFA 90 58 BFA 100 58 BFA 120 58

90.26 1/2022
Equipment for pullouts
for pullout-/drawer system L3/M3 and M8 (no extra charge)
M8 Special M8 - article variant, extend type with „U“ (Ex.: ZTN 60 U)

Type sketch Description Planning Type Width

Pullout-partition width 30 cm, no length divider ZTN30 30 20

1 cross divider infinitely adjustable width 40 cm, no length divider M8 ZTN40 40 22
F = Coloured width 45 cm, 1 length divider ZTN45 45 23
060 silver grey metallic 061 carbon metallic width 50 cm, 2 length dividers ZTN50 50 24
width 60 cm, 2 length dividers ZTN60 60 26
width 80 cm, 3 length dividers ZTN80 80 31
width 90 cm, 3 length dividers ZTN90 90 33
width 100 cm, 4 length dividers ZTN100 100 37
width 120 cm, 4 length dividers ZTN120 120 41

Loose length divider For complementing ZTN .. . ZTNL 5

F = Coloured
060 silver grey metallic 061 carbon metallic

Inner drawers / Inner pullouts

for pullout-/drawer system L3/M3 and M8 (extra charge 30 points)
M8 Special M8 - article variant, extend type with „U“ (Ex.: IGS 60 58 U)

Type sketch Description Planning Type Width

Inner drawer with Behind doors. For floor and tall For cupboard depth 58 cm
metal front units. The actual width of the inner IGSE4558 45 119
with spacer on hinge side drawer is about 2.5 cm less than IGSE5058 50 123
Colours: 060 silver grey metallic listed measurement. M8 IGSE6058 60 132
061 carbon metallic Cutlery trays:
IGSE .. = cutlery tray not possible For cupboard depth 68 cm
IGSE4568 45 136
IGSE5068 50 140
IGSE6068 60 147

Inner drawer with Behind doors. For floor and tall For cupboard depth 58 cm
metal front units. The actual width of the inner IGSD8058 80 182
with spacer on both sides drawer is about 5 cm less than IGSD9058 90 197
Colours: 060 silver grey metallic listed measurement. M8 IGSD10058 100 213
061 carbon metallic Cutlery trays:
IGSD .. = cutlery tray not possible For cupboard depth 68 cm
IGSD8068 80 198
IGSD9068 90 215
IGSD10068 100 231

Inner drawer with Fitted behind pullouts or doors For cupboard depth 58 cm
metal front with special hinges (MP .. SCH 155). IGS2058 20 114
standard width For floor and tall units. IGS3058 30 114
Colours: 060 silver grey metallic The actual width of the inner drawers M8 IGS4058 40 116
061 carbon metallic is equivalent to the nominal. IGS4558 45 119
IGS5058 50 123
IGS6058 60 132
IGS8058 80 182
IGS9058 90 197
IGS10058 100 213
IGS12058 120 244

For cupboard depth 68 cm

IGS2068 20 130
IGS3068 30 130
IGS4068 40 132
IGS4568 45 136
IGS5068 50 140
IGS6068 60 147
IGS8068 80 198
IGS9068 90 215
IGS10068 100 231
IGS12068 120 249

1/2022 90.27
Inner drawers / Inner pullouts
for pullout-/drawer system L3/M3 and M8 (extra charge 30 points)
M8 Special M8 - article variant, extend type with „U“ (Ex.: IGS 60 58 U)

Type sketch Description Planning Type Width

Inner pullout with Behind doors. For floor and tall For cupboard depth 58 cm
metal front units. The actual width of the inner IGZE4558 45 169
with spacer on hinge side pullouts is about 2.5 cm less than IGZE5058 50 175
Colours: 060 silver grey metallic listed measurement. M8 IGZE6058 60 182
061 carbon metallic
For cupboard depth 68 cm
IGZE4568 45 186
IGZE5068 50 190
IGZE6068 60 198

Inner pullout with Behind doors. For floor and tall For cupboard depth 58 cm
metal front units. The actual width of the inner IGZD8058 80 243
with spacer on both sides pullouts is about 5 cm less than IGZD9058 90 261
Colours: 060 silver grey metallic listed measurement. M8 IGZD10058 100 280
061 carbon metallic
For cupboard depth 68 cm
IGZD8068 80 259
IGZD9068 90 278
IGZD10068 100 297

Inner pullout with Fitted behind pullouts or doors For cupboard depth 58 cm
metal front with special hinges (MP .. SCH 155). IGZ2058 20 163
standard width For floor and tall units. IGZ3058 30 163
Colours: 060 silver grey metallic The actual width of the inner pullouts M8 IGZ4058 40 166
061 carbon metallic is equivalent to the nominal. IGZ4558 45 169
IGZ5058 50 175
IGZ6058 60 182
IGZ8058 80 243
IGZ9058 90 261
IGZ10058 100 280
IGZ12058 120 318

For cupboard depth 68 cm

IGZ2068 20 181
IGZ3068 30 181
IGZ4068 40 183
IGZ4568 45 186
IGZ5068 50 190
IGZ6068 60 198
IGZ8068 80 259
IGZ9068 90 278
IGZ10068 100 297
IGZ12068 120 334

1. Catch for inner drawers and Not possible with: Metal front panel
inner pullouts - SensoMatic and Tip-Softclose IGMN 14
can be used for metal front panels
2.
2. and for 1.6 cm thick front panels 1.6 cm front panel
loose for on-site installation IGMNU 14

Wide angle hinges Extra charge per floor or tall unit For floor units
for fitting for factory installation. MPTSCH155 17
inner drawer IGS.. or
inner pullout IGZ.. For tall units
opening angle 155° MPHSCH155 28

The use off the wide angle hinge MP .. SCH 155 allows a flush placement of the front reverse side with the carcase interior.
Please note: by applying the door flush with the carcase interior, the space requirement of the cupboard door opening increases. This is 2-7 mm depending
on the front thickness. It is essential to ensure that the door can be opened at least at 90° (beware of handle).

90.28 1/2022
 Surface style
Inner drawers / Inner pullouts Descriptions / colours see surround accessories chapter 11.

for pullout-/drawer system L3/M3 and M8 (extra charge 30 points)

Neutral
M8 Special M8 - article variant, extend type with „U“ (Ex.: IGSU 60 58 U) FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME FG MC H
Exchange type 1.6 cm front panel MPIGSU20 20 0 0 7 9 39 45 53
for inner drawers MPIGSU30 30 0 0 7 9 39 45 53
MPIGSU40 40 0 0 8 11 41 47 60
Permitted for all IGS ..., AN IGE and AN IGD. MPIGSU45 45 0 0 9 12 42 47 63
Extra charge for a higher quality 1.6 cm surface finish MPIGSU50 50 0 0 10 13 43 48 67
of the inner drawers. MPIGSU60 60 0 0 11 15 44 50 73
MPIGSU80 80 0 0 15 20 48 56 87
MPIGSU90 90 0 0 17 21 51 59 94
MPIGSU100 100 0 0 19 23 53 60 100
MPIGSU120 120 0 0 21 28 57 65 114

Exchange type 1.6 cm front panel MPIGZU20 20 0 0 8 10 42 48 57

for inner pullouts MPIGZU30 30 0 0 8 10 42 48 57
MPIGZU40 40 0 0 9 12 44 50 64
Permitted for all IGZ ..., AN IGE and AN IGD. MPIGZU45 45 0 0 10 13 45 51 68
Extra charge for a higher quality 1.6 cm surface finish MPIGZU50 50 0 0 11 14 46 52 72
of the inner pullouts. MPIGZU60 60 0 0 12 16 47 54 79
MPIGZU80 80 0 0 16 21 52 60 94
MPIGZU90 90 0 0 18 23 55 63 101
MPIGZU100 100 0 0 20 25 57 65 108
MPIGZU120 120 0 0 23 30 61 70 123

Inner drawer with 1.6 cm front For cupboard depth 58 cm

with spacer on hinge side IGSEU4558 45 119 119 128 131 161 166 182
Colours: 060 silver grey metallic IGSEU5058 50 123 123 133 136 166 171 190
061 carbon metallic M8 IGSEU6058 60 132 132 143 147 176 182 205

Behind doors. For floor and tall For cupboard depth 68 cm

units. The actual width of the inner IGSEU4568 45 136 136 145 148 178 183 199
drawer is about 2.5 cm less than IGSEU5068 50 140 140 150 153 183 188 207
listed measurement. IGSEU6068 60 147 147 158 162 191 197 220
Cutlery trays:
IGSEU .. = cutlery tray not possible

Inner drawer with 1.6 cm front For cupboard depth 58 cm

with spacer on both sides IGSDU8058 80 182 182 197 202 230 238 269
Colours: 060 silver grey metallic IGSDU9058 90 197 197 214 218 248 256 291
061 carbon metallic M8 IGSDU10058 100 213 213 232 236 266 273 313

Behind doors. For floor and tall For cupboard depth 68 cm

units. The actual width of the inner IGSDU8068 80 198 198 213 218 246 254 285
drawer is about 5 cm less than IGSDU9068 90 215 215 232 236 266 274 309
listed measurement. IGSDU10068 100 231 231 250 254 284 291 331
Cutlery trays:
IGSDU .. = cutlery tray not possible

Inner drawer with 1.6 cm front For cupboard depth 58 cm

standard width IGSU2058 20 114 114 121 123 153 159 167
Colours: 060 silver grey metallic IGSU3058 30 114 114 121 123 153 159 167
061 carbon metallic M8 IGSU4058 40 116 116 124 127 157 163 176
IGSU4558 45 119 119 128 131 161 166 182
Fitted behind pullouts or doors IGSU5058 50 123 123 133 136 166 171 190
with special hinges (MP .. SCH 155). IGSU6058 60 132 132 143 147 176 182 205
For floor and tall units. IGSU8058 80 182 182 197 202 230 238 269
The actual width of the inner drawers IGSU9058 90 197 197 214 218 248 256 291
is equivalent to the nominal. IGSU10058 100 213 213 232 236 266 273 313
Width alterations not possible! IGSU12058 120 244 244 265 272 301 309 358

For cupboard depth 68 cm

IGSU2068 20 130 130 137 139 169 175 183
IGSU3068 30 130 130 137 139 169 175 183
IGSU4068 40 132 132 140 143 173 179 192
IGSU4568 45 136 136 145 148 178 183 199
IGSU5068 50 140 140 150 153 183 188 207
IGSU6068 60 147 147 158 162 191 197 220
IGSU8068 80 198 198 213 218 246 254 285
IGSU9068 90 215 215 232 236 266 274 309
IGSU10068 100 231 231 250 254 284 291 331
IGSU12068 120 249 249 270 277 306 314 363

1/2022 90.29
 Surface style
Inner drawers / Inner pullouts Descriptions / colours see surround accessories chapter 11.

for pullout-/drawer system L3/M3 and M8 (extra charge 30 points)

Neutral
M8 Special M8 - article variant, extend type with „U“ (Ex.: IGSU 60 58 U) FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME FG MC H
Inner pullout with 1.6 cm front For cupboard depth 58 cm
with spacer on hinge side IGZEU4558 45 169 169 179 182 214 220 237
Colours: 060 silver grey metallic IGZEU5058 50 175 175 186 189 221 227 247
061 carbon metallic M8 IGZEU6058 60 182 182 194 198 229 236 261

Behind doors. For floor and tall For cupboard depth 68 cm

units. The actual width of the inner IGZEU4568 45 186 186 196 199 231 237 254
pullouts is about 2.5 cm less than IGZEU5068 50 190 190 201 204 236 242 262
listed measurement. IGZEU6068 60 198 198 210 214 245 252 277

Inner pullout with 1.6 cm front For cupboard depth 58 cm

with spacer on both sides IGZDU8058 80 243 243 259 264 295 303 337
Colours: 060 silver grey metallic IGZDU9058 90 261 261 279 284 316 324 362
061 carbon metallic M8 IGZDU10058 100 280 280 300 305 337 345 388

Behind doors. For floor and tall For cupboard depth 68 cm

units. The actual width of the inner IGZDU8068 80 259 259 275 280 311 319 353
pullouts is about 5 cm less than IGZDU9068 90 278 278 296 301 333 341 379
listed measurement. IGZDU10068 100 297 297 317 322 354 362 405

Inner pullout with 1.6 cm front For cupboard depth 58 cm

standard width IGZU2058 20 163 163 171 173 205 211 220
Colours: 060 silver grey metallic IGZU3058 30 163 163 171 173 205 211 220
061 carbon metallic M8 IGZU4058 40 166 166 175 178 210 216 230
IGZU4558 45 169 169 179 182 214 220 237
Fitted behind pullouts or doors IGZU5058 50 175 175 186 189 221 227 247
with special hinges (MP .. SCH 155). IGZU6058 60 182 182 194 198 229 236 261
For floor and tall units. IGZU8058 80 243 243 259 264 295 303 337
The actual width of the inner pullouts IGZU9058 90 261 261 279 284 316 324 362
is equivalent to the nominal. IGZU10058 100 280 280 300 305 337 345 388
Width alterations not possible! IGZU12058 120 318 318 341 348 379 388 441

For cupboard depth 68 cm

IGZU2068 20 181 181 189 191 223 229 238
IGZU3068 30 181 181 189 191 223 229 238
IGZU4068 40 183 183 192 195 227 233 247
IGZU4568 45 186 186 196 199 231 237 254
IGZU5068 50 190 190 201 204 236 242 262
IGZU6068 60 198 198 210 214 245 252 277
IGZU8068 80 259 259 275 280 311 319 353
IGZU9068 90 278 278 296 301 333 341 379
IGZU10068 100 297 297 317 322 354 362 405
IGZU12068 120 334 334 357 364 395 404 457

90.30 1/2022
Anti slip mats
for pullout-/drawer system L3/M3 and M8 (no extra charge)
M8 Special M8 - article variant, extend type with „U“ (Ex.: ARE 60 58 U)

Type sketch Description/Planning Type Width

Fully equipped with anti slip mats

Via the Header data of the planning programmes, anti slip mats can efficiently be scheduled for a kitchen order.
Variant key: ARE 60 resp. ARE 61
The full equipment contains anti slip mats for
- drawers and inner drawers
- pullouts and inner pullouts
- swivel shelves
Delivery volume and dimensions meet the requirements of the kitchen order.

The extra charge is calculated automatically and is about 20 % below the value corresponding to a single order.
Alternative equipment such as cutlery trays is not taken into account in determining the amount.

Anti slip mat For cupboard depth 58 cm ARE3058 30 6

KF = Plastic coloured M8 ARE4058 40 8
160 silver grey 161 carbon ARE4558 45 8
ARE5058 50 10
for cupboards with drawers/pullout ARE6058 60 10
ARE7058 70 14
ARE8058 80 17
ARE9058 90 17
ARE10058 100 24
ARE12058 120 24

for cupboards with drawers/pullout For cupboard depth 68 cm ARE3068 30 6

M8 ARE4068 40 9
ARE4568 45 9
ARE5068 50 11
ARE6068 60 11
ARE7068 70 15
ARE8068 80 19
ARE9068 90 19
ARE10068 100 28
ARE12068 120 28

for carousel floor unit ATE 82 .. K, CTE 82 .. K ARETE80 80 20

ATE 92 .. K, CTE 92 .. K ARETE90 90 21

for corner unit with semi-circular ATEE 115 .. SD, CTEE 115 .. D ARETEE115D 100 20
swing-out shelves

for corner unit with swing-out shelves ATEE 110 .. SLM, CTEE 110 .. LM ARETEE110LM L/R 100 20
door width 45 cm

for corner unit with swing-out shelves ATEE 115 .. SLM, CTEE 115 .. LM ARETEE115LM L/R 100 20
door width 50 cm

for corner unit with swing-out shelves ATEE 125 .. SLM, CTEE 125 .. LM ARETEE125LM L/R 100 20
door width 60 cm

for diagonal corner unit ATED 92 .. K, CTED 92 .. K ARETED90 90 23

for VZ-premium equipment MP VZ 30 P .. AREVZ30P 30 10

MP VZ 45 P .. AREVZ45P 45 12

Wool felt cover Cover for drawers and pullouts. WFA3058 30 11

for drawers and pullouts For cupboard depth 58 cm M8 WFA4058 40 15
wool felt, black mottled WFA4558 45 18
WFA5058 50 20
WFA6058 60 24
WFA8058 80 32
WFA9058 90 32
WFA10058 100 41
WFA12058 120 41

For cupboard depth 68 cm WFA3068 30 12

WFA4068 40 18
WFA4568 45 20
WFA5068 50 22
WFA6068 60 28
WFA8068 80 34
WFA9068 90 40
WFA10068 100 44
WFA12068 120 51

Wool felt cover For cupboard depth 58 cm WFATR6058 60 24

for floor shelf units with drawers/ WFATR9058 90 37
pullouts flush with carcase
wool felt, black mottled

1/2022 90.31
Shelves
Dimensional information

Info shelf depths

If you need additional shelves to those already supplied, please find below instructions on how to order the correct shelf dimensions:
You can simply specify the cupboard dimensions (nominal width and depth of the cupboard) and receive the appropriate shelf. For the
standard size of our shelves, 3.35 cm is subtracted from the cabinet width. For depth, the standard shelves are 31 cm for the 34 cm
deep cabinet, 41 cm for the 46 cm deep cabinet, 51 cm for the 56 cm deep cabinet and 61 cm for the 66 cm deep cabinet. Enclosed
are some examples:

For a T6080 cupboard please confirm type F6058.

This is automatically pre-evaluated with shelf dimensions 56.65 cm x 51.0 cm.

For a T808048 cupboard please confirm type F8048.

This is automatically pre-evaluated with shelf dimensions 76.65 cm x 41.0 cm.

There are also some cupboards which have shelf depths in special dimensions. These are listed as follows with the corresponding
special dimensions.

Cupboard Changed shelf dimensions (for carcase depth 56 cm)

Corner floor unit TEE ... Shelf depth 45.8 cm
Vero cupboards with lighting ... VE Shelf depth 48 cm
Tall utility unit H ... HW Shelf depth top 41 cm
Shelf depth bottom 28.3 cm
Tall storage unit with door shelf H ... TA Shelf depth 28.2 cm
Tall shelf unit for ironing HR ... WB Shelf depth 43.2 cm
Slide-away doors tall units HV .. Shelf depth 52 cm
Slide-away doors tall units HV ... CAS and HV ... CA Shelf depth 33.8 cm (always 28 mm thick)
Slide-away doors midway unit HVA ... Shelf depth 41.7 cm
Corner tall unit HEE ... Shelf depth 45.8 cm
Storage-Centre H ... VC Shelf depth top 43 cm
Shelf depth bottom 15.8 cm
Cookware-Centre H ... VT Shelf depth top 27.2 cm
Shelf depth bottom 34 cm
Interior+ base tall unit H ... I Shelf depth 35 cm
Wall unit O ... GA Shelf depth 25.8 cm
Wall unit O ... GW Shelf depth 24.9 cm
Wall unit for extractor OHS ... Shelf depth 7.5 cm
Wall unit with sliding door OS ... Shelf depth 29 cm
Interior+ base wall unit O ... I Shelf depth 15 cm
Wall unit with IPGR Shelf depth 21.4 cm
Corner wall unit OEE ... Shelf depth 25.8 cm
Swing flap door wall unit OSK ... Shelf depth 28 cm
Wall unit with fold-up doors OFK ... Shelf depth 28 cm
Midway unit with sliding doors ESS ... Shelf depth 49 cm
Midway roller shutter units EJ ... Shelf depth 47.5 cm
Midway glass roller shutter units EJ ... G Shelf depth 48.8 cm

90.32 1/2022
 Surface style
Shelves Descriptions / colours see surround accessories chapter 11.

in interior finish

Neutral
FF
K PF FS
Type sketch Description/Planning Type Width KH KG VM ME FG MC H
Shelf F1536 15 23 23 32 43 47 55 46
incl. 4 shelf supports and F2036 20 23 23 32 43 47 55 46
2 pullout protection F3036 30 24 24 33 45 50 57 48
For cupboard depth 36 cm F4036 40 24 24 33 45 50 57 48
Shelf depth 10 - 31 cm F4536 45 25 25 35 46 52 59 50
up to 76 cm width 1.6 cm thickness F5036 50 25 25 35 46 52 59 50
from 80 cm width 1.9 cm thickness F6036 60 26 26 36 48 54 62 52
F6136 61 28 28 39 52 58 66 56
For floor units, tall units and F7036 70 28 28 39 52 58 66 56
wall units. F7636 76 29 29 40 54 60 69 58
F8036 80 29 29 40 54 60 69 58
F9036 90 30 30 42 56 62 71 60
F9136 91 31 31 43 58 64 74 62
F10036 100 31 31 43 58 64 74 62

Shelf F1548 15 23 23 32 43 47 55 46
incl. 4 shelf supports and F2048 20 23 23 32 43 47 55 46
2 pullout protection F3048 30 24 24 33 45 50 57 48
For cupboard depth 48 cm F4048 40 25 25 35 46 52 59 50
Shelf depth 31.1 - 41 cm F4548 45 26 26 36 48 54 62 52
up to 76 cm width 1.6 cm thickness F5048 50 27 27 38 50 56 64 54
from 80 cm width 1.9 cm thickness F6048 60 28 28 39 52 58 66 56
F6148 61 30 30 42 56 62 71 60
For floor units and tall units. F7048 70 30 30 42 56 62 71 60
F7648 76 31 31 43 58 64 74 62
F8048 80 31 31 43 58 64 74 62
F9048 90 33 33 46 61 68 78 66
F9148 91 34 34 47 63 70 81 68
F10048 100 34 34 47 63 70 81 68

Shelf F1558 15 24 24 33 45 50 57 48
incl. 4 shelf supports and F2058 20 24 24 33 45 50 57 48
2 pullout protection F3058 30 25 25 35 46 52 59 50
For cupboard depth 58 cm F4058 40 26 26 36 48 54 62 52
Shelf depth 41.1 - 51 cm F4558 45 27 27 38 50 56 64 54
up to 76 cm width 1.6 cm thickness F5058 50 28 28 39 52 58 66 56
from 80 cm width 1.9 cm thickness F6058 60 29 29 40 54 60 69 58
F6158 61 32 32 45 59 66 76 64
For floor units and tall units. F7058 70 32 32 45 59 66 76 64
F7658 76 34 34 47 63 70 81 68
F8058 80 34 34 47 63 70 81 68
F9058 90 36 36 50 67 74 85 72
F9158 91 37 37 52 69 76 88 74
F10058 100 37 37 52 69 76 88 74

Shelf F1568 15 24 24 33 45 50 57 48
incl. 4 shelf supports and F2068 20 24 24 33 45 50 57 48
2 pullout protection F3068 30 26 26 36 48 54 62 52
For cupboard depth 68 cm F4068 40 27 27 38 50 56 64 54
Shelf depth 51.1 - 61 cm F4568 45 28 28 39 52 58 66 56
up to 76 cm width 1.6 cm thickness F5068 50 29 29 40 54 60 69 58
from 80 cm width 1.9 cm thickness F6068 60 31 31 43 58 64 74 62
F6168 61 34 34 47 63 70 81 68
For floor units. F7068 70 34 34 47 63 70 81 68
F7668 76 36 36 50 67 74 85 72
F8068 80 36 36 50 67 74 85 72
F9068 90 38 38 53 71 78 90 76
F9168 91 39 39 54 72 80 93 78
F10068 100 39 39 54 72 80 93 78

Shelf F39058 90 40 40 56 74 83 95 80
thickness 2.8 cm F312058 120 53 53 74 98 109 126 106
incl. 4 shelf supports and
2 pullout protection
For cupboard depth 58 cm
Shelf depth 10 - 61 cm

For 2-door tall units.

Shelf F3V6068 60 48 48 61 77 84 95 82
thickness 2.8 cm F3V7068 70 51 51 66 83 90 102 88
incl. 4 shelf supports F3V9068 90 54 54 70 88 97 109 94
For cupboard depth 58 cm F3V12068 120 67 67 88 112 123 140 120
Shelf depth 33.8 - 52 cm

For slide-away doors tall units.

1/2022 90.33
Shelves
in K 273 platinum and K 284 carbon grey / Glass shelves

Type sketch Description Planning Type Width

Shelf For AOE 60 .., COE 60 .. FE6036 60 46

incl. shelf supports For AOE 65 .., COE 65 .. FE6536 65 46
for corner wall units
Colours: 273 platinum
284 carbon grey

Shelf For AOED 60 .., COED 60 .. FED6036 60 44

incl. shelf supports
for corner wall units
Colours: 273 platinum
284 carbon grey

Glass shelf For floor units, tall units and F4536G 45 24

incl. glass shelf supports wall units. F5036G 50 24
For cupboard depth 36 cm F6036G 60 26
Shelf depth 31 cm F8036G 80 32
F9036G 90 32
F10036G 100 33

Glass shelf For floor units and tall units. F4558G 45 39

incl. glass shelf supports F5058G 50 39
For cupboard depth 58 cm F6058G 60 42
Shelf depth 48 (Vero) or 51 cm F8058G 80 52
F9058G 90 52
F10058G 100 53

Glass shelf For fold-up / swing flap door wall units, FK4536G 45 20
incl. glass shelf supports for width 120 cm = 2x FK 60 36 G. FK5036G 50 21
For cupboard depth 36 cm For Vero-cupboards. FK6036G 60 22
Shelf depth 28 cm FK8036G 80 25
FK9036G 90 26
FK10036G 100 28

Interior+

Type sketch Description Planning Type Width

Interior+ shelf For use in Interior+ swing-out frame. .

1 profile shelf Equipment for IP 50 B with 1x IP 14 35 C and
for IP 60 B with 2x IP 14 23 C possible.
For cupboard width 50 and 100 cm. IP50B 50 155
For cupboard width 60 cm. IP60B 60 160

Interior+ railing For use in Interior+ swing-out frame. .

2 railings For cupboard width 50 and 100 cm. IP50R 50 73
For cupboard width 60 cm. IP60R 60 74

Interior+ container For use in Interior+ swing-out frame. IP1423C 67

1 container 22.6 x 14 x 10.8 cm For cupboard width 60 cm 2 can be positioned.

Interior+ container For use in Interior+ swing-out frame. IP1435C 67

1 container 35.2 x 14 x 10.8 cm For cupboard width 50 cm 1 can be positioned.

Interior+ glass jar set For use in Interior+ swing-out frame. IPGD3 72
3 glass jars with aroma seal stainless steel
Height 20.7 cm, diameter 9.7 cm
content per jar 1.2 litres

Interior+ glass jar set For use in Interior+ swing-out frame. IPGD4 94
4 glass jars with aroma seal stainless steel
Height 20.7 cm, diameter 9.7 cm
content per jar 1.2 litres

90.34 1/2022
Wire accessories / Drop-in trays

Type sketch Description Planning Type Width

Spice rack .
4 rows

for 12 spice jars For doors with 30 + 40 cm width DRGW12C 55

without drop in tray and 53 cm height.

for 18 spice jars For doors from 45 cm width DRGW18C 69

bottom row with drop in tray for small items and 53 cm height.

Cleaning materials basket Installation dimensions: PMK 30 34

302 chrome gloss width 30 cm, height 11 cm, depth 10 cm

Cleaning materials pullout To be installed in sink units. PMZ 15 133

height 39 cm, depth 46 cm, width 15 cm Watch drain connection.
on telescopic runners Supplied loose for fitting on site.
302 chrome gloss Floor fixing on site, usable left / right.
removable basket with handle

Wire basket For pullouts. DK22 42

chromium plated
width 22 cm, depth 41 cm, height 19 cm

Telescopic towel rails For side and interior fixing. AHS 15 41

3 rails Width 15 cm, depth 50 cm
302 chrome gloss

Telescopic towel rails Width 11 cm, depth 50 cm AHS2 11 41

2 rails
302 chrome gloss

Drop-in tray For use in floor units EZRK30 30 26

plastic AT 30 80 SZRK, CT 30 73 ZRK,
Colour metallic grey CT 30 80 ZRK and CT 30 86 ZRK.

Built-in refuse container

Type sketch Description Planning Type Width

Built-in refuse container For sink units from door width 40 cm. EA L/R 34 49
round, housing stainless steel State L/R on 2-door units.
with plastic bin Installation dimensions:
holds 13 litres width 34 cm, height 47 cm, depth 28.5 cm

Built-in refuse container For sink units and floor units EAE 34 31
plastic from width 45 cm.
angular State L/R on 2-door units.
Colour 161 carbon Installation dimensions:
18 litre contents width 34 cm, height 36 cm, depth 26 cm

Built-in refuse container For sink units from door width 40 cm. EA5 35 127
with fully extendible pullout Installation dimensions:
3 separate rectangular bins width 35 cm, height 32 cm, depth 48 cm
hold 1x 18 and 2x 8.5 litres Supplied loose for fitting on site.
No front connection.
Floor mounting on site.

1/2022 90.35
Slicer / Folding steps

Type sketch Description Planning Type

Electric slicer Fits into 45, 50 and 60 cm wide base ASA 397
with lifting mechanism for opening units (not possible for housing units).
in front of worktop When planning ASA in right corner,
High quality full metal style widen corner blender.
Electrolytically polished serrated blade Not possible:
for high quality cut - in inner drawers behind doors
User friendly bayonet lock - for AVANCE with simultaneous use of interior lighting
for change of knives
Child protection through 2 finger starting
system
230 volt, 65 watt
factory installed in drawer
Bread fed in from the right

Folding steps, loose KLH 93

with fixing
standing height 37.9 cm
Dimension folded:
length 46.3 cm
width 40.1 cm
depth 9.8 cm

Further accessories

Type sketch Description Planning Type Width

Floor unit-base stabilisation For pullout units 100 and 120 cm wide. BU100 100 31
loose We recommend the use for particularly heavy loads, BU120 120 34
Metal profile for minimising e.g. through granite worktops and heavy loads in the
deflection of the plinth base pullouts.
for installation on site. Recessed plinth AN SOS not possible!

Cutting board SDBA 79

Solid maple wood
Width 48 cm, depth 36 cm
With lay-on edge for positioning
on the worktop

Towel rail for CONTINO Not possible with chamfered edges! MS 405 stainless steel colour
aluminium, length 52 cm CHTH52MS 43
For fitting onto fronts or end panels
in the area of the recessed handle powder coated
CHTH52F 63

90.36 1/2022
Lighting / Electrical accessories

Electrical accessories
LED-Linear lights with constant light or optional with dynamic light and dimmer function 91. 01-02

LED-handle profiles with constant light or optional with dynamic light and dimmer function 91. 03

Lighting /
LED-lamps with constant light or optional with dynamic light and dimmer function 91. 03

LED-connectivity technology 91. 04

91.
Cable and appliance covering 91. 05

LED-light 91. 06-07

Switch for all lamp systems 91. 07

Interior lighting 91. 08

LED-pullout interior light 91. 09

Electrical accessories 91. 10

Recessed handle illumination 91. 11

1/2022 91.
 Lighting / Electrical accessories
Installation system 24V

LED-linear lights, built-in lights and LED handle profiles are Several dynamic lighting controls can be managed via remote
Electrical accessories

designed in such a way that they can be operated with a con- control or independently synchronised.
nection technology, particularly created for this purpose. Both, All connection options can be switched on or off via the house
with a constant neutral white or with a dynamic colour tem- installation or with a central switch on the front of the power
perature between warm white and cold white (6400K). Three unit. The last light setting remains when switched off.
Lighting /

different power supply systems are available for this purpose.

With the dynamic lighting control, lights can now in addition 2
be dimmed to change the light temperature. The connected
1
load is expandable as needed with the required number of
91. expansion sets. 4000K-Stick

LED constant light

2
4000K neutral white 1 LED

4000K-Stick

Order type: S24 4000K ...

Constant 1 Power supply 40 W or 75 W

2 Distributor with 4000K-memory stick LED

LED dynamic light

Base set

warm white – cold white

2
1 4

1 Order type: 2 Order type: 3 Order type:

S24 DLF ... S24 DLT ... S24 DLB ...

Dimmable
1 Power supply 1
1 Power supply 1 Power supply
10 32
4
40 W or 75 W 30 W or 75 W 40 W or 75 W
3
3 Distributor 3 Distributor 3 Distributor

4 Radio receiver 4 Radio receiver 9 Blue tooth receiver 1

Functions: 5
10 3
5 Radio 10 Flush-mounted - on/off
remote control keypad - Smooth dimming
Functions: Functions: - Light intensity 3
- on/off - on/off smooth
4
LED
- Smooth dimming - Smooth dimming - can be controlled
- Light intensity - Light intensity via CASAMBI 1
smooth smooth (App in APP Store 5 3
- 6 channels - without batteries, without charge
controllable power supply or available in
6 receivers can be via household Play Store) 9
controlled per channel. installation 4
LED

Expansion set for bigger power input

9
driving power

7
1
3
6
Order type: S24 DLE ...
driving power

1 Power supply 40 W or 75 W

6 Switching amplifier 7
1
7 Control cable for connecting to the base kit 3
n max. ... LED
6

91. 1/2022
Lighting
LED-Linear lights with constant light or optional with dynamic light and dimmer function
24 volt system

Type sketch Description Planning Type Length

Linear glass cupboard light Connected wattage 3.5 W BLEG45 35 78

1 light with LED-strip Connected wattage 4 W BLEG50 40 88
built into the top of the cupboard Connected wattage 5 W BLEG60 50 94
Light temperature 4000K or variable of Connected wattage 6.5 W BLEG70 60 112
2700 to 6400K with dimmer possible Connected wattage 7.5 W BLEG80 70 120
1 extension cable 4 pole, 200 cm Connected wattage 8.5 W BLEG90 80 121
CRI > 95 Connected wattage 10 W BLEG100 90 138
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black Connected wattage 3.5 W BLEG45US 35 86
Connected wattage 4 W BLEG50US 40 96
Can be installed in glass cupboards and shelf units Connected wattage 5 W BLEG60US 50 102
1.6 cm thick with matching nominal length. Connected wattage 6.5 W BLEG70US 60 120
Light always 10 cm shorter than nominal length. Connected wattage 7.5 W BLEG80US 70 128
The light can be operated either with the power Connected wattage 8.5 W BLEG90US 80 129
supply set S24 4000K or with the dynamic light Connected wattage 10 W BLEG100US 90 146
control S24 DL .. . (UL-certified)

Linear niche light Connected wattage 2 W BLEN30 20 68

1 light with LED-strip Connected wattage 3 W BLEN40 30 68
in wall unit floor, Connected wattage 3.5 W BLEN45 35 78
fitted below Connected wattage 4 W BLEN50 40 88
Light temperature 4000K or variable of Connected wattage 5 W BLEN60 50 94
2700 to 6400K with dimmer possible Connected wattage 6.5 W BLEN70 60 112
1 extension cable 4 pole, 200 cm Connected wattage 7.5 W BLEN80 70 120
CRI > 95 Connected wattage 8.5 W BLEN90 80 121
Energy efficiency class E up to F Connected wattage 10 W BLEN100 90 138
AE = Anodised aluminium Connected wattage 12 W BLEN120 110 157
405 stainless steel 417 steel black

Can be installed in wall units and shelf units Connected wattage 2 W BLEN30US 20 76
from 1.6 cm thick with matching nominal length Connected wattage 3 W BLEN40US 30 76
(not for corner- or roller shutter wall units). Connected wattage 3.5 W BLEN45US 35 86
Light always 10 cm shorter than nominal length. Connected wattage 4 W BLEN50US 40 96
However, there is a possibility to plan a lining shelf Connected wattage 5 W BLEN60US 50 102
underneath the wall units and thus be able to use Connected wattage 6.5 W BLEN70US 60 120
Linear lighting, type BLE .. also underneath the Connected wattage 7.5 W BLEN80US 70 128
excluded cupboard types. Connected wattage 8.5 W BLEN90US 80 129
The light can be operated either with the power Connected wattage 10 W BLEN100US 90 146
supply set S24 4000K or with the dynamic light Connected wattage 12 W BLEN120US 110 165
control S24 DL .. . (UL-certified)

Linear shelf light Connected wattage 2 W length 18.8 cm BLE20 20 68

1 light with LED-strip Connected wattage 3 W length 28.8 cm BLE30 30 68
in shelf Connected wattage 4 W length 38.8 cm BLE40 40 88
fitted below Connected wattage 4.5 W length 43.8 cm BLE45 45 93
Light temperature 4000K or variable of Connected wattage 5 W length 48.8 cm BLE50 50 94
2700 to 6400K with dimmer possible Connected wattage 6.5 W length 58.8 cm BLE60 60 112
2 end caps on the sides Connected wattage 7.5 W length 68.8 cm BLE70 70 120
1 extension cable 4 pole, 200 cm Connected wattage 8.5 W length 78.8 cm BLE80 80 121
CRI > 95 Connected wattage 10 W length 88.8 cm BLE90 90 138
Energy efficiency class E up to F Connected wattage 11 W length 98.8 cm BLE100 100 142
AE = Anodised aluminium Connected wattage 13 W length 118.8 cm BLE120 120 171
405 stainless steel 417 steel black

Please state position! Connected wattage 2 W length 18.8 cm BLE20US 20 76

Can be installed in bottom or top shelves from Connected wattage 3 W length 28.8 cm BLE30US 30 76
1.6 cm thickness. Connected wattage 4 W length 38.8 cm BLE40US 40 96
Please observe on the side and between two Linear Connected wattage 4.5 W length 43.8 cm BLE45US 45 101
shelf lights a minimum distance of 4.5 cm. Connected wattage 5 W length 48.8 cm BLE50US 50 102
The light can be operated either with the power Connected wattage 6.5 W length 58.8 cm BLE60US 60 120
supply set S24 4000K or with the dynamic light Connected wattage 7.5 W length 68.8 cm BLE70US 70 128
control S24 DL .. . Connected wattage 8.5 W length 78.8 cm BLE80US 80 129
Connected wattage 10 W length 88.8 cm BLE90US 90 146
Connected wattage 11 W length 98.8 cm BLE100US 100 150
Connected wattage 13 W length 118.8 cm BLE120US 120 179
(UL-certified)

1/2022 91.01
Lighting
LED-Linear lights with constant light or optional with dynamic light and dimmer function
24 volt system

Type sketch Description Planning Type Length

Linear shelf light Minimum length for calculation, 100 cm. per metre
Light in flexible length up to 270 cm Please state placement, light length and colour charge per started 10 cm
Factory grooved into shelves, boards and on order. up to
side panels from 1.6 cm thickness Please note lateral minimum clearance of 5 cm BLE 270 155
1 light with LED-strip to external edges.
Dynamically controlled 2700 - 6400 K The light can be operated either with the power
Power 11 W/m supply set S24 4000K or with the dynamic light BLEUS 270 163
2 end caps on the sides control S24 DL .. . (UL-certified)
1 extension cable 4 pole, 200 cm Luminaire profile can be exchanged.
CRI > 95
Energy efficiency class E up to F
AE = Anodised aluminium
405 stainless steel 417 steel black

Linear lights vertical for shelf units Minimum shelf unit height 39.75 cm per metre
2 LED lights vertical installed at the factory Please state colour. charge per started 10 cm
on both shelf unit inner sides Please order power pack separately. BLEV2 310
Dynamically controlled 2700 - 6400 K The light is positioned 2 cm behind the front edge,
Power 22 W/m the shelves are shortened accordingly.
Cable length 110 cm The light can be operated either with the power BLEV2US 326
2 extension cables 4 pole, 200 cm supply set S24 4000K or with the dynamic light (UL-certified)
CRI > 95 control S24 DL .. .
Energy efficiency class E up to F Length of the light = clear shelf unit height - 2 cm
AE = Anodised aluminium Not available for side panels, slide-in, add-on and
405 stainless steel 417 steel black isle end shelf units.
Minimum length for calculation, 100 cm.

LED-lamp Minimum length for calculation, 100 cm. per metre

Light in flexible length up to 270 cm Please state placement, light length and colour charge per started 10 cm
Factory grooved into shelves, boards and on order. up to
side panels from 1.6 cm thickness Please note lateral minimum clearance of 5 cm LEEB 270 124
Dynamically controlled 2700 - 5000 K to external edges.
Power 16 W/m The light can be operated either with the power
Cable length 110 cm supply set S24 4000K or with the dynamic light
1 extension cable 4 pole, 200 cm control S24 DL .. .
Energy efficiency class F
AE = Anodised aluminium
405 stainless steel 417 steel black

LED-lamps vertical for shelf units Minimum shelf unit height 39.75 cm per metre
2 LED lights vertical installed at the factory Please state colour. charge per started 10 cm
on both shelf unit inner sides Please order power pack separately. LEV2 248
Dynamically controlled 2700 - 5000 K The light is positioned 2 cm behind the front edge,
Power 32 W/m the shelves are shortened accordingly.
Cable length 110 cm The light can be operated either with the power
2 extension cables 4 pole, 200 cm supply set S24 4000K or with the dynamic light
Energy efficiency class F control S24 DL .. .
AE = Anodised aluminium Length of the light = clear shelf unit height - 2 cm
405 stainless steel 417 steel black Not available for side panels, slide-in, add-on and
isle end shelf units.
Minimum length for calculation, 100 cm.

Depending on the depth of the component, the light is positioned 7 cm from the front edge and arranged.
Please define different positions or number of lights per sketch.

For side panels and shelves: please note when planning that the wiring guide is visibly milled at the back.

For shelves: The wiring guide is invisibly drilled, max. depth 36 cm.

91.02 1/2022
Lighting
LED-handle profiles with constant light or optional with dynamic light and dimmer function
24 volt system

Type sketch Description Planning Type Length

LED-handle profile Connected wattage 3 W LPO30 30 64

1 light with LED-strip Connected wattage 4 W LPO40 40 74
built in to wall unit shelf Connected wattage 4.5 W LPO45 45 78
light beam downwards Connected wattage 5 W LPO50 50 84
Light temperature 4000K or variable of Connected wattage 6.5 W LPO60 60 90
2700 to 6400K with dimmer possible Connected wattage 8.5 W LPO80 80 113
1 extension cable 4 pole, 200 cm Connected wattage 10 W LPO90 90 123
Energy efficiency class E up to F Connected wattage 11 W LPO100 100 133
Connected wattage 13 W LPO120 120 153
Can be installed in wall units with matching nominal
length (not for corner wall units, glass wall units and
2-door wall units with the same-side door hinge).
Up to cupboard depth of 36 cm.
Width alterations not possible!
The light can be operated either with the power
supply set S24 4000K or with the dynamic light
control S24 DL .. .

LED-handle profile Connected wattage 9 W LPOG45 45 120

1 light with LED-strip Connected wattage 10 W LPOG50 50 130
is installed in the bottom of the glass Connected wattage 13 W LPOG60 60 146
wall unit Connected wattage 17 W LPOG80 80 185
light beam downwards and upwards Connected wattage 20 W LPOG90 90 203
Light temperature 4000K or variable of Connected wattage 22 W LPOG100 100 221
2700 to 6400K with dimmer possible Connected wattage 26 W LPOG120 120 260
1 extension cable 4 pole, 200 cm
Energy efficiency class E up to F

Installable in glass wall units with matching

nominal length.
Up to cupboard depth of 36 cm.
Width alterations not possible!
The light can be operated either with the power
supply set S24 4000K or with the dynamic light
control S24 DL .. .

Lighting
LED-lamps with constant light or optional with dynamic light and dimmer function
24 volt system

Type sketch Description Planning Type

LED-lamp For fitting into cupboard shelves, lining shelves LER 51

covering 8.3 x 8.3 x 0.2 cm or top shelves.
stainless steel colour Built-in depth 1.3 cm
1 LED-light 3 watt, 24 volt The light can be operated either with the power LERUS 56
Light temperature 4000K or variable of supply set S24 4000K or with the dynamic light (UL-certified)
2700 to 6400K with dimmer possible control S24 DL .. .
Drill hole diameter 7.8 cm
1 connecting cable 4 pole, 200 cm
Energy efficiency class G

Drill hole for built-in lights Extra charge for drill holes and, BO78 33
with diameter 7.8 cm for LE R if applicable, cutout for cable
in shelves B ... channel.

Drill hole for built-in lights BO78U 33

with diameter 7.8 cm for LE R
in lower wall unit shelf with
cable conduit

Drill hole for built-in lights BO78O 33

with diameter 7.8 cm for LE R
in upper cupboard shelf and possibly
with cable conduit

1/2022 91.03
Lighting
LED-connectivity technology 24 volt system

Type sketch Description Planning Type

LED 4000K power supply set, Possible to connect to central 40 watt

24 volt system switch ZSM, BZS and FZS. S244000K40 63
1 adapter 100-240 volt 50/60 HZ, 24 volt,
4000 K

40 or 75 watt For USA 40 watt (UL-certified)

200 cm feed cable S244000K40US 69
Connection cable to distributor 2 pole, 32 cm
1 distributor with 4000K setting and
5 connection sockets 4 pole 75 watt
S244000K75 90

For USA 75 watt (UL-certified)

S244000K75US 97

LED dynamic light control Possible to connect to central 40 watt

basic set radio 24 volt system switch ZSM, BZS and FZS. S24DLF40 144
1 adapter 100-240 volt 50/60 HZ, 24 volt, When using these switches, the last selected light setting
40 or 75 watt is retained! 75 watt
1 distributor with 5 connection sockets and S24DLF75 173
2 pole lead to power supply 32 cm
1 radio receiver for connection to distributor For USA 75 watt (UL-certified)
1 connecting cable 4 pole, 150 cm S24DLF75US 180
1 radio remote control

LED dynamic light control Control exclusively via smartphone or tablet. 40 watt
basic set Bluetooth 24 volt system Essential to install the CASAMBI App (free S24DLB40 183
1 adapter 100-240 volt 50/60 HZ, 24 volt, of charge from the App Store or Play Store).
40 or 75 watt Possible to connect to central 75 watt
1 distributor with 5 connection sockets and switch ZSM, BZS and FZS. S24DLB75 211
2 pole lead to power supply 32 cm When using these switches, the last selected light setting
1 Bluetooth receiver for connection is retained! For USA 75 watt (UL-certified)
to distributor S24DLB75US 218
1 connecting cable 4 pole, 150 cm

LED dynamic light control The keyboard remote control must only be activated by an 30 watt
basic set flush switch authorised skilled person on site! S24DLT30 116
1 adapter 100-240 volt 50/60 HZ, 24 volt, A push button has to be supplied on site. Not supplied!.
30 or 75 watt 75 watt
1 distributor with 6 connection sockets and S24DLT75 140
2 pole lead to power supply 32 cm
1 keypad (transmitter) for on-site
electrical wiring with a standard
push button.
Push button not supplied.
1 receiver for connection in front of distributor

LED dynamic light control Possible to connect to central 40 watt

extension set 24 volt system switch ZSM, BZS and FZS. S24DLE40 80
1 adapter 100-240 volt 50/60 HZ, 24 volt, When using these switches, the last selected light setting
40 or 75 watt is retained! 75 watt
1 switching amplifier with control lead 200 cm S24DLE75 110
1 distributor with 6 connection sockets 4 pole
For USA 75 watt (UL-certified)
S24DLE75US 117

Distributor 24 volt system S24VT4 16

for connection to S24 4000K .. or
S24 DL ..
6 connection sockets 4 pole
1 connecting cable 4 pole, 15 cm

Extension cable 24 volt system S24VK4 10

4 pole, for use after the distributor,
length 200 cm

91.04 1/2022
 Surface style
Cable and appliance covering Descriptions / colours see surround accessories chapter 11.

Neutral
FF
K PF FS
Type sketch Description/Planning Type KH KG VM ME KM FG MC H
Cover for electric cable KMK 45 45 67 79 83 86 97 83
below an island unit
Dimensions: 15 x 15 cm,
height from 25 up to 50 cm.
Items are supplied loose.

Please state height.

Holder for control units and cable KMU 61

Length 108 cm
height 9 cm
colour 273 platinum

For on-site installation below cupboards

for layouts without plinths.

Casing for control units KMI 76

and cable
Length 41.7 cm
height 6.5 cm
Colours: 273 platinum
284 carbon grey

For on-site installation in cupboard interior.

Cable feed through floor or back wall.

1/2022 91.05
Lighting
LED-light
24 volt system

Type sketch Description Planning Type

LED-light To be used at the bottom of wall units LEA 24

Brushed aluminium or in lining shelves.
1 LED-light 5 watt, 24 volt Dimmable with LED-switch LE A SD.
Light temperature 4000K, neutral white
200 cm connecting cable to
power supply unit
height 0.4 cm, depth 19 cm, width 7 cm
Energy efficiency class E up to G

LED-light set To be used at the bottom of wall units LEAS3 72

Brushed aluminium or in lining shelves.
stainless steel colour Dimmable with LED-switch LE A SD.
3 LED-lights a 5 watt, 24 volt
Light temperature 4000K, neutral white
200 cm connecting cable to
power supply unit
height 0.4 cm, depth 19 cm, width 7 cm
Energy efficiency class E up to G
1 power supply
24 volt, 15 watt primarily 220-240 volt
50/60 Hz
200 cm feed cable with Euro flat-plug

LED-light set To be used at the bottom of wall units LEAS5 119

Brushed aluminium or in lining shelves.
stainless steel colour Dimmable with LED-switch LE A SD.
5 LED-lights a 5 watt, 24 volt
Light temperature 4000K, neutral white
200 cm connecting cable to
power supply unit
height 0.4 cm, depth 19 cm, width 7 cm
Energy efficiency class E up to G
1 power supply
24 volt, 30 watt primarily 220-240 volt
50/60 Hz
200 cm feed cable with Euro flat-plug

LED-power supply If the dimmable switch LE A SD is not used, LEANT 34

for LED-light LE A connections can be made via central switch
24 volt, 30 watt primarily 220-240 volt ZSM, BZS and FZS.
50/60 Hz
200 cm feed cable with Euro flat-plug

LED-extension cable LEAVK150 8

for LED-light LE A
Length 150 cm

LED-switch dimmable For positioning in the niche area. LEASD 26

For installation between power supply
and distribution
24 volt
Cable length 2x 200 cm

IN

OUT

91.06 1/2022
Lighting
LED-light
24 volt system

Type sketch Description Planning Type

LED-light set To be used at the bottom of wall units LEAS3US 86

Brushed aluminium or in lining shelves.
stainless steel colour Dimmable with LED-switch LE A SD.
3 LED-lights a 5 watt, 24 volt
Light temperature 4000K, neutral white
200 cm connecting cable to
power supply unit
height 0.4 cm, depth 19 cm, width 7 cm
Energy efficiency class E up to G
1 power supply (UL-certified)
24 volt, 15 watt primarily 110 volt
50/60 Hz
200 cm feed cable

LED-light set To be used at the bottom of wall units LEAS5US 130

Brushed aluminium or in lining shelves.
stainless steel colour Dimmable with LED-switch LE A SD.
5 LED-lights a 5 watt, 24 volt
Light temperature 4000K, neutral white
200 cm connecting cable to
power supply unit
height 0.4 cm, depth 19 cm, width 7 cm
Energy efficiency class E up to G
1 power supply (UL-certified)
24 volt, 30 watt primarily 110 volt
50/60 Hz
200 cm feed cable

Lighting
Switch for all lamp systems

Type sketch Description Planning Type

Touch-free central switch Suitable for all lamp systems in this price list. BZS 78
with plug and coupling Supply voltage 230 V.
plug cable 100 cm long
sensor cable 200 cm long
colour white

Mini central switch Suitable for all power supplies. ZSM 23

Housing stainless steel colour, Supply voltage 230 V.
switch rocker, black
For power supply 230 V
1 power cable 200 cm with
Euro flat-plug
1 connection cable 200 cm
with Euro-flat coupling

Radio central switch Suitable for all lamp systems in this price list. FZS 88
1 hand held remote control transmitter Supply voltage 230 V.
1 remote control receiver
with safety plug and safety connector
plug cable 300 cm long

Additional hand held remote control Max. 5 hand held remote control transmitters can be FZSSL 16
used per remote control receiver.

Module housing For several adjoining switches. FZSM 5

with 2 end pieces

Sensor switch Suitable for all power supplies

for cupboard interior illumination for use behind doors or flaps.

Supply voltage 230 V. HSSC 37

Supply voltage 110 V. HSSCUS 58

(UL-certified)

1/2022 91.07
Lighting
Interior lighting

Type sketch Description Planning Type

LED-cupboard interior illumination SIBD 94

1 light 50 cm, 3.9 W / 24 V
integrated movement sensor
200 cm cable length
Light temperature 4000K, neutral white
1 LED-adaptor, 15 W
with multiple distributor
200 cm power lead
with Euro flat-plug
Energy efficiency class E up to G

LED-cupboard interior illumination SIBD2 163

2 lights 50 cm, à 3.9 W / 24 V
integrated movement sensor
200 cm cable length
Light temperature 4000K, neutral white
1 LED-adaptor, 15 W
with multiple distributor
200 cm power lead
with Euro flat-plug
Energy efficiency class E up to G

91.08 1/2022
Lighting
LED-pullout interior light

Type sketch Description Planning Type Width

LED-pullout interior light per pullout / drawer .

1 light Connected wattage 1.9 W ZBI30 30 92
for installation on site Connected wattage 3.1 W ZBI40 40 92
Light temperature 4000K, neutral white Connected wattage 3.7 W ZBI45 45 92
1 connection cable 5 cm Connected wattage 3.7 W ZBI50 50 93
1 connecting cable 200 cm to power Connected wattage 4.8 W ZBI60 60 96
supply unit Connected wattage 6.2 W ZBI70 70 115
Energy efficiency class D Connected wattage 7.2 W ZBI80 80 115
Connected wattage 7.8 W ZBI90 90 117
Cupboards are generally completely furnished i.e. Connected wattage 9 W ZBI100 100 119
for one cupboard with 1 drawer and 2 pullouts Connected wattage 11 W ZBI120 120 130
50 cm width, plan 3x ZBI 50.
Plan an additional power supply S24 NTV 40
or S24 NTV 75.

LED-power supply 24 volt system Possible to connect to central 40 watt

100-240 volt 50/60 HZ, 24 volt, switch ZSM, BZS and FZS. S24NTV40 58
40 or 75 watt
200 cm feed cable 75 watt
with 5-way distributor, 4 pole S24NTV75 84

Distributor 24 volt system S24VT4 16

for connection to S24 4000K .. or
S24 DL ..
6 connection sockets 4 pole
1 connecting cable 4 pole, 15 cm

Extension cable 24 volt system S24VK4 10

4 pole, for use after the distributor,
length 200 cm

LED-pullout interior light USA per pullout / drawer .

1 light Connected wattage 1.9 W ZBI30US 30 97
for installation on site Connected wattage 3.1 W ZBI40US 40 97
Light temperature 4000K, neutral white Connected wattage 3.7 W ZBI45US 45 97
1 connection cable 5 cm Connected wattage 3.7 W ZBI50US 50 98
1 connecting cable 280 cm to power Connected wattage 4.8 W ZBI60US 60 101
supply unit Connected wattage 6.2 W ZBI70US 70 121
Energy efficiency class D Connected wattage 7.2 W ZBI80US 80 121
Connected wattage 7.8 W ZBI90US 90 123
Cupboards are generally completely furnished i.e. Connected wattage 9 W ZBI100US 100 125
for one cupboard with 1 drawer and 2 pullouts Connected wattage 11 W ZBI120US 120 137
50 cm width, plan 3x ZBI 50 US. (UL-certified)
Plan an additional power supply ZBI S24 NT 75 US.

LED-power supply ZBIS24NT75US 61

110 volt 50/60 Hz, 24 volt, 75 watt (UL-certified)
150 cm feed cable with 6-way distributor

Distributor 24 volt system ZBIS24VTUS 16

for connection to ZBI S24 NT 75 US
6 connection sockets 2 pole
1 connecting cable 15 cm

Not possible in combination with

- function floor units and units with waste systems
- processing types AN MU, AN MU2 and AN HVA (pullouts possible)
- inner pullouts (IGZ..) and inner drawers (IGS..)
- tall units with vertical recessed handle
- some recess ventilators (case-by-case assessment necessary)

1/2022 91.09
Electrical accessories

Type sketch Description Planning Type

Retractable socket element For installation above floor units. STE103 106
in worktops Please bear in mind distance to cupboard interior!
with 3 sockets Please plan additional drill hole ST BO 10 .. . For France
Power cable 300 cm STE103FR 116
Drill hole diameter 10.2 cm
Overall height 35 cm For Switzerland
STE103CH 116

For Great Britain

STE103GB 116

For USA
STE103US 189

Retractable socket element For installation above floor units. STEU102 106
with USB Please bear in mind distance to cupboard interior!
in worktops Please plan additional drill hole ST BO 10 .. . For France
with 2 sockets and a USB port, STEU102FR 116
Power cable 250 cm
Drill hole diameter 10.2 cm For Switzerland
Projection from worktop: 18.6 cm STEU102CH 116
Overall height 26.2 cm
for STEU 10 2 GB and STEU 10 2 US For Great Britain
Projection from worktop: 22.1 cm STEU102GB 116
Overall height: 29.7 cm
For USA
STEU102US 189

Rotating socket element When installing worktop systems with 4 cm thickness STEBF2 109
in worktops or less: note the overhang towards the bottom.
with 2 sockets and a USB port, Please add cutout AUS BF .. . For Switzerland
surface stainless steel look STEBF2CH 120
insert rotates when pressed
Power supply cable 250 cm with mains plug For France
STEBF2FR 120

For Great Britain

STEBF2GB 120

Tablet PC holder TPCH 188

Width 20 cm, height 15 cm
1 stand for tablet PC,
box at back 20 cm with
cut-out for power cable
1 wall adapter with USB port
for charging voltage 5 V
1 connection cable 250 cm
1 adapter 240 volt, 24 volt, 15 watt
All visible parts powder coated
in the following colours:
F = Coloured
100 arctic 282 alpine grey
103 merino 286 black slate
120 frosty white 307 carbon glimmer
130 mohair

Tablet PC holder TPCHUS 197

Width 20 cm, height 15 cm
1 stand for tablet PC,
box at back 20 cm with
cut-out for power cable
1 wall adapter with USB port
for charging voltage 5 V
1 connection cable 250 cm
1 adapter 110-230 volt 50/60 HZ, 24 volt,
15 watt
All visible parts powder coated
in the following colours:
F = Coloured
100 arctic 282 alpine grey
103 merino 286 black slate
120 frosty white 307 carbon glimmer
130 mohair

91.10 1/2022
Recessed handle illumination

Type sketch Description Planning Type

Recessed handle illumination Lacquer colour matches the colour of the lacquered per metre
1 lighting profile in aluminium or lacquered recessed handle. charge per started 10 cm
in F with LED strip The light can be operated either with the power A 413 aluminium
For illuminating the CONTINO recessed handle supply set S24 4000K or with the dynamic light GMBA 99
for floor units under a worktop. control S24 DL .. .
Light temperature 4000K or variable of Only possible for dishwashers with standard recessed lacquered in F
2700 to 6400K with dimmer possible handle. GMBF 117
Length power cable 280 cm Not possible in combination with:
Minimum length of lighting profiles 10 cm - carousel corner units
Maximum length of lighting profiles 410 cm - handle profile 885. .. and 887.413
External corner are supplied. - alteration type AN TK GAUS for hobs
The profile is available in millimeter
measurement in the sizes listed above.
The corresponding LED strip can be cut
to length every 5 cm and will be added at
maximum length.
Connected wattage 11 W per meter
Energy efficiency class E up to F

1/2022 91.11
1/2022
Sinks / Taps

Colour overview artificial stone and ceramic sinks 92. 01-02

BLANCO Built-in sinks stainless steel 92. 03-12

BLANCO Built-in sinks Silgranit 92. 12-13

BLANCO Taps 92. 14

FRANKE Built-in sinks stainless steel 92. 15-19

FRANKE Built-in sinks Fragranit 92. 20-22

Sinks / Taps
FRANKE Taps 92. 23-25

FRANKE Accessories 92. 25

SYSTEMCERAM Built-in sinks ceramic 92. 26-27

92.
CARESSI Built-in sinks stainless steel 92. 28

CARESSI Built-in sinks artificial stone 92. 29

1/2022 92.
 Installation options for sinks and hobs
* Worktops below 2 cm thickness require a sub-
structure support which must be incorporated
into the floor units on site.

Installation of sinks and hobs in worktops differ, depending on We classify these installation options and mark the appropriate
the combination of the installation item and the desired worktop worktop cut-outs as well as the matching sinks from our range
type. Different worktop materials facilitate specific installation ver- with symbols.
sions that in turn have to match the construction of the item to be Note: The symbolised sketches are compounded and do not cor-
installed. respond with the real element contours.

Symbol Type of installation Item Material Cutout

to be installed

Overlay • Hobs • all worktops • AUS

• Sinks • AUS M
For sinks and hobs with supporting edge. • AUS GL
Sinks / Taps

The factory supplied cut-out edges are untreated.

1 • AUS KP
• AUS PK
• AUS GR

92.

Flush with surface * • Hobs • Quartz material • AUS PK F

• Sinks • Ceramic • AUS GR F
For sinks and hobs, for flush with surface installation.
2 The worktop cut-out has a factory supplied rebate, matching
the item to be installed.

Built-under on site * • Sinks • Quartz material • AUS CP

• AUS GRP
Only suitable for sinks and water resistant worktop materials.
3a The cutting edges are made material-specific in visible side
quality. The sink installation must only be undertaken by the
kitchen fitter.

Built-under in factory * • Sinks • Glass • AUS GLPE

Only suitable for sinks and water resistant worktop materials.
3b The cut-out edges are made material-specific in visible side
quality. Sink bowl is inserted in factory.

Built-under * • Sinks • Laminate • SPU U

• Compact material • SPU KP U
This special method is only possible with worktops and
4 compact material. The sinks are inserted from below, up to
the laminate cover,by a special procedure and sealed with
waterproof grouting. Almost all stainless steel sinks can be
built in using this procedure.

Flush-mounted for stainless steel sinks • Sinks • Laminate • AUS KF S

Cutouts of this type are made with a watertight synthetic resin
5a frame in laminate worktops. The frame is adapted to the sink
contours of the desired stainless steel sink and moulded under
the laminate. Only suitable stainless steel sinks are permitted.
The installation is carried out on site.

Flush-mounted for stainless steel sinks * • Sinks • Glass • AUS GFS

• Compact material • AUS KPF S
The worktop cutout has a factory made rebate matching the sink. • Ceramic • AUS PKF S
5b Only suitable stainless steel sinks are permitted. The installation is
carried out on site from above.

Flush-with-surface – for ceramic/artificial stone sinks • Sinks • Laminate • AUS KSF

For laminate worktops, cut-outs of this kind are made with
6 a watertight resin frame. The frame is matched to the desired
ceramic sink outline and poured under the laminate using
a special procedure. Solely approved for surface-flush installation
are suitable ceramic and artificial stone sinks. Installation from
above on site.

92. 1/2022
Artificial stone sinks

BLANCO SILGRANIT SIL

Modern design, durability and a high de-

gree of easy-care are the hallmarks of our
artificial stone sinks.

652 white 654 jasmin 656 alumetallic

Material properties
A Material composition of 80 % granite-
quartz and 20 % composite-resin forms
the basis for the visual appeal of natural
stone and excellent material properties.
• high scratch resistance
• high impact resistance 657 tartufo 658 coffee 659 rock grey
• high temperature stability up to 280°
• high thermal shock resistance

Ease of maintenance
Great care in manufacturing and an op-
timised material formulation ensure the
660 anthracite 663 black
easy maintenance properties:
• smooth surface
• hygiene protection

FRANKE FRAGRANIT FR1

Modern design, durability and a high de-

gree of easy-care are the hallmarks of our
artificial stone sinks.

636 stone grey 640 glacier 643 onyx

Material properties
A Material composition of 80 % granite-
quartz and 20 % composite-resin forms
the basis for the visual appeal of natural
stone and excellent material properties.
• high scratch resistance
• high impact resistance 645 cashmere 649 black matt
• high temperature stability up to 280°
• high thermal shock resistance

Ease of maintenance
Great care in manufacturing and an op-
timised material formulation ensure the
easy maintenance properties:
• smooth surface
• hygiene protection

1/2022 92.01
SYSTEMCERAM Sinks

A mixture of modern surfaces in matt or glossy finish and high quality porcelain stoneware characterises our range of ceramic sinks.
A special sintering process makes ceramic surfaces extremely hygienic and easy to care for.
The material properties of SYSTEMCERAM sinks meet the high demands of norm-tested laboratory ceramics. The special characteris-
tics of ceramic sinks make these the ideal material for all areas which are exposed to intense demands.
- high shock and impact resistance
- acid resistance
- cold and heat resistance
- high cut resistance
- absolutely hygienic due to a totally smooth surface
- dirt and limescale do not adhere to ceramics

Optional with Clean Plus coating: water forms into perfect droplets, picking up the dirt and washing it away. The special coat-
ing supports the high surface tension of the water. As with the lotus effect, water does not accumulate on the surface, it does not
stick and pearls off.

SYSTEMCERAM SC1
SYSTEMCERAM CP1

SC1 = standard coating

CP1 = clean Plus coating
509 sc greenland (glossy) 510 sc polar 511 sc noblesse

515 sc aluminium 518 sc siena 519 sc nero (glossy)

SYSTEMCERAM SC2
SYSTEMCERAM CP2

SC1 = standard coating

CP1 = clean Plus coating
522 sc magnolia (glossy) 523 sc jasmin 524 sc satin

525 sc fango 526 sc titan 527 sc lava

529 sc slate 530 sc nigra

92.02 1/2022
BLANCO Built-in sinks stainless steel

Type sketch Description/Planning Type

Single bowl stainless steel from cupboard width 40 cm

BLANCO Andano 340-U 3a / 3b SPL40153E 292
1 bowl with 3½“ basket valve
and concealed overflow,
InFino drainage system 4
manually operable
Bowl depth 190 mm
1 combination trap system
Inner radius 22 mm

Remote control pop-up can be optionally

retrofitted, see page 92.12.

Single bowl stainless steel from cupboard width 45 cm

BLANCO Andano 400-U 3a / 3b SPL45154E 366
1 bowl with 3½“ basket valve
and concealed overflow,
InFino drainage system 4
manually operable
Bowl depth 190 mm
1 combination trap system
Inner radius 22 mm

Remote control pop-up can be optionally

retrofitted, see page 92.12.

Single bowl stainless steel from cupboard width 50 cm

BLANCO Andano 450-U 3a / 3b SPL50153E 380
1 bowl with 3½“ basket valve
and concealed overflow,
InFino drainage system 4
manually operable
Bowl depth 190 mm
1 combination trap system
Inner radius 22 mm

Remote control pop-up can be optionally

retrofitted, see page 92.12.

Single bowl stainless steel from cupboard width 60 cm

BLANCO Andano 500-U 3a / 3b SPL60158E 388
1 bowl with 3½“ basket valve
and concealed overflow,
InFino drainage system 4
manually operable
Bowl depth 190 mm
1 combination trap system
Inner radius 22 mm

Remote control pop-up can be optionally

retrofitted, see page 92.12.

Built-in sinks stainless steel from cupboard width 60 cm

BLANCO Andano 340/180-U 3a / 3b SPL60159E L/R 589
1 large bowl with 3½“ basket valve
and concealed overflow,
InFino drainage system 4
manually operable
Diagram shows R Bowl depth 190 mm
1 small bowl with 3½“ basket valve,
InFino drainage system
manually operable
Bowl depth 130 mm
1 combination trap system
Inner radius 22 mm

Remote control pop-up can be optionally

retrofitted, see page 92.12.

1/2022 92.03
BLANCO Built-in sinks stainless steel

Type sketch Description/Planning Type

Single bowl stainless steel from cupboard width 40 cm

BLANCO Andano 340-IF 1 SPL40154E 347
1 bowl with 3½“ basket valve
and concealed overflow,
2
InFino drainage system
manually operable
Bowl depth 190 mm 5a / 5b
1 combination trap system
Sink with flat rim
Inner radius 22 mm

Remote control pop-up can be optionally

retrofitted, see page 92.12.

Single bowl stainless steel from cupboard width 45 cm

BLANCO Andano 400-IF 1 SPL45155E 442
1 bowl with 3½“ basket valve
and concealed overflow,
2
InFino drainage system
manually operable
Bowl depth 190 mm 5a / 5b
1 combination trap system
Sink with flat rim
Inner radius 22 mm

Remote control pop-up can be optionally

retrofitted, see page 92.12.

Single bowl stainless steel from cupboard width 50 cm

BLANCO Andano 450-IF 1 SPL50154E 439
1 bowl with 3½“ basket valve
and concealed overflow,
2
InFino drainage system
manually operable
Bowl depth 190 mm 5a / 5b
1 combination trap system
Sink with flat rim
Inner radius 22 mm

Remote control pop-up can be optionally

retrofitted, see page 92.12.

Single bowl stainless steel from cupboard width 60 cm

BLANCO Andano 500-IF 1 SPL60160E 447
1 bowl with 3½“ basket valve
and concealed overflow,
2
InFino drainage system
manually operable
Bowl depth 190 mm 5a / 5b
1 combination trap system
Sink with flat rim
Inner radius 22 mm

Remote control pop-up can be optionally

retrofitted, see page 92.12.

Built-in sinks stainless steel from cupboard width 60 cm

BLANCO Andano 340/180-IF 1 SPL60161E L/R 694
1 large bowl with 3½“ basket valve
and concealed overflow,
2
InFino drainage system
manually operable
Diagram shows R Bowl depth 190 mm 5a / 5b
1 small bowl with 3½“ basket valve,
InFino drainage system
manually operable
Bowl depth 130 mm
1 combination trap system
Sink with flat rim
Inner radius 22 mm

Remote control pop-up can be optionally

retrofitted, see page 92.12.

92.04 1/2022
BLANCO Built-in sinks stainless steel

Type sketch Description/Planning Type

Built-in sinks stainless steel from cupboard width 90 cm

BLANCO Andano 400/400-IF 1 SPL902E 878
2 large bowls with 3½“ basket valve
and concealed overflow,
2
InFino drainage system,
manually operable
Bowl depth 190 mm 5a / 5b
1 combination trap system
Sink with flat rim
Inner radius 22 mm

Remote control pop-up can be optionally

retrofitted, see page 92.12.

Single bowl stainless steel from cupboard width 45 cm

BLANCO Andano 400-IF/A 1 SPL45156E 510
1 bowl with 3½“ basket valve
with eccentric remote control
2
and concealed overflow,
InFino drainage system
Bowl depth 190 mm 4
1 round press button, solid stainless steel
1 combination trap system
Sink with flat rim 5a / 5b
Inner radius 22 mm

Built-under installation = tap Ø < 55 mm

Single bowl stainless steel from cupboard width 60 cm

BLANCO Andano 500-IF/A 1 SPL60162E 550
1 bowl with 3½“ basket valve
with eccentric remote control
2
and concealed overflow,
InFino drainage system
Bowl depth 190 mm 4
1 round press button, solid stainless steel
1 combination trap system
Sink with flat rim 5a / 5b
Inner radius 22 mm

Built-under installation = tap Ø < 55 mm

Built-in sinks stainless steel from cupboard width 60 cm

BLANCO Andano 340/180-IF/A 1 SPL60163E 820
1 large bowl with 3½“ basket valve
with remote control pop-up and
2
concealed overflow,
InFino drainage system
Bowl depth 190 mm 4
1 round press button, solid stainless steel
1 small bowl with 3½“ basket valve,
InFino drainage system 5a / 5b
manually operable
Bowl depth 130 mm
1 combination trap system
Sink with flat rim
Inner radius 22 mm

Built-under installation = tap Ø < 55 mm

Built-in sinks stainless steel from cupboard width 90 cm

BLANCO Andano 400/400-IF/A 1 SPL901E 1057
2 large bowls with 3½“ basket valve
with remote control pop-up and
2
concealed overflow,
InFino drainage system
Bowl depth 190 mm 4
1 round press button, solid stainless steel
1 combination trap system
Sink with flat rim 5a / 5b
Inner radius 22 mm

Built-under installation = tap Ø < 55 mm

1/2022 92.05
BLANCO Built-in sinks stainless steel

Type sketch Description/Planning Type

Built-in sinks stainless steel from cupboard width 50 cm

BLANCO Axis III 5 S-IF 1 SPL5055E L/R 632
1 large bowl with 3½“ basket valve
with remote control pop-up and
2
concealed overflow,
InFino drainage system
Diagram shows R Bowl depth 175 mm 4
1 control knob, stainless steel finish
1 small bowl with 1½“ basket valve,
InFino drainage system 5a / 5b
manually operable
Bowl depth 60 mm
1 stainless steel drip tray
1 white glass cutting board
1 combination trap system
Sink with flat rim

Built-in sinks stainless steel 1000 from cupboard width 60 cm

BLANCO Axis III 6 S-IF 125 65 1 SPL6080E L/R 738
1 large bowl with 3½“ basket valve
with remote control pop-up and
2
420

510
concealed overflow,

340
52
InFino drainage system
Diagram shows R Bowl depth 175 mm 4
340 180
1 control knob, stainless steel finish
45

555 43
1 small bowl with 3½“ basket valve,
InFino drainage system 5a / 5b
manually operable
Bowl depth 110 mm
1 stainless steel drip tray
1 white glass cutting board
1 combination trap system
Sink with flat rim

Single bowl stainless steel from cupboard width 60 cm

BLANCO Claron 500-U 3a / 3b SPL60152E 756
1 bowl with 3½“ basket valve
and concealed overflow,
InFino drainage system 4
manually operable
Bowl depth 190 mm
1 combination trap system
Inner radius 10 mm

Remote control pop-up can be optionally

retrofitted, see page 92.12.

Single bowl stainless steel from cupboard width 60 cm

BLANCO Claron 500-IF/A 1 SPL60156E 929
1 bowl with 3½“ basket valve
with eccentric remote control
2
and concealed overflow,
InFino drainage system
Bowl depth 190 mm 4
1 round press button, solid stainless steel
1 combination trap system
Sink with flat rim 5a / 5b
Inner radius 10 mm

Built-under installation = tap Ø < 55 mm

Built-in sinks stainless steel from cupboard width 60 cm

BLANCO Classic Pro 6 S-IF 1 SPL6087E L/R 568
1 large bowl with 3½“ basket valve
with remote control pop-up,
2
InFino drainage system
Bowl depth 170 mm
Diagram shows R 1 control knob, stainless steel finish 4
1 small bowl with 3½“ basket valve,
InFino drainage system
manually operable 5a / 5b
Bowl depth 130 mm
1 stainless steel multi-function bowl
1 combination trap system
Sink with flat rim

92.06 1/2022
BLANCO Built-in sinks stainless steel

Type sketch Description/Planning Type

Built-in sinks stainless steel from cupboard width 45 cm

BLANCO Classimo 45 S-IF 1 SPL4543E L/R 309
1 bowl with 3½“ basket valve
with eccentric remote control
2
and concealed overflow,
InFino drainage system
Bowl depth 205 mm 4
Diagram shows R 1 round press button, stainless steel
appearance
1 combination trap system 5a / 5b
Sink with flat rim

Built-in sinks stainless steel from cupboard width 60 cm

BLANCO Classimo 6 S-IF 1 SPL6099E L/R 479
1 large bowl with 3½“ basket valve
with remote control pop-up and
2
concealed overflow,
InFino drainage system
Bowl depth 205 mm 4
Diagram shows R 1 round press button, stainless steel
appearance
1 small bowl with 3½“ basket valve, 5a / 5b
InFino drainage system
manually operable
Bowl depth 145 mm
1 stainless steel drip tray
1 combination trap system
Sink with flat rim

Built-in sinks stainless steel from cupboard width 60 cm

BLANCO Classimo XL 6 S-IF 1 SPL60100E L/R 415
1 bowl with 3½“ basket valve
with eccentric remote control
2
and concealed overflow,
InFino drainage system
Bowl depth 205 mm 4
Diagram shows R 1 round press button, stainless steel
appearance
1 combination trap system 5a / 5b
Sink with flat rim

Built-in sinks stainless steel from cupboard width 45 cm

BLANCO Divon II 45 S-IF 1 SPL45118E L/R 641
1 bowl with 3½“ basket valve
with eccentric remote control
2
and concealed overflow,
InFino drainage system
Diagram shows R Bowl depth 196 mm 4
1 control knob, stainless steel finish
1 combination trap system
Sink with flat rim 5a / 5b
Inner radius 10 mm

Built-under installation = tap Ø < 58 mm

Built-in sinks stainless steel from cupboard width 50 cm

BLANCO Divon II 5 S-IF 1 SPL50112E L/R 690
1 bowl with 3½“ basket valve
with eccentric remote control
2
and concealed overflow,
InFino drainage system
Diagram shows R Bowl depth 196 mm 4
1 control knob, stainless steel finish
1 combination trap system
Sink with flat rim 5a / 5b
Inner radius 10 mm

Built-under installation = tap Ø < 58 mm

1/2022 92.07
BLANCO Built-in sinks stainless steel

Type sketch Description/Planning Type

Built-in sinks stainless steel from cupboard width 60 cm

BLANCO Divon II 6 S-IF 1 SPL60148E L/R 998
1 large bowl with 3½“ basket valve
with remote control pop-up and
2
concealed overflow,
InFino drainage system
Diagram shows R Bowl depth 196 mm 4
1 control knob, stainless steel finish
1 small bowl with 3½“ basket valve,
InFino drainage system 5a / 5b
manually operable
Bowl depth 136 mm
1 stainless steel drip tray
1 combination trap system
Sink with flat rim
Inner radius 10 mm

Built-under installation = tap Ø < 58 mm

Single bowl stainless steel from cupboard width 60 cm

BLANCO Etagon 500-IF/A 1 SPL6082E 815
1 bowl with 3½“ basket valve
with eccentric remote control
2
and concealed overflow,
InFino drainage system
Bowl depth 190 mm 4
1 round pull-up knob, chrome
2 support rails for Etagon
1 combination trap system 5a / 5b
Sink with flat rim

Built-under installation = tap Ø < 50 mm

Single bowl stainless steel from cupboard width 60 cm

BLANCO Etagon 500-U 3a / 3b SPL6084E 642
1 bowl with 3½“ basket valve
and concealed overflow,
InFino drainage system 4
manually operable
Bowl depth 190 mm
2 support rails for Etagon
1 combination trap system

Remote control pop-up can be optionally

retrofitted, see page 92.12.

Single bowl stainless steel from cupboard width 80 cm

BLANCO Etagon 700-IF/A 1 SPL801E 921
1 bowl with 3½“ basket valve
with eccentric remote control
2
and concealed overflow,
InFino drainage system
Bowl depth 190 mm 4
1 round pull-up knob, chrome
2 support rails for Etagon
1 combination trap system 5a / 5b
Sink with flat rim
Inner radius 15 mm

Built-under installation = tap Ø < 50 mm

Single bowl stainless steel from cupboard width 80 cm

BLANCO Etagon 700-U 3a / 3b SPL804E 716
1 bowl with 3½“ basket valve
and concealed overflow,
InFino drainage system 4
manually operable
Bowl depth 190 mm
2 support rails for Etagon
1 combination trap system
Inner radius 15 mm

Remote control pop-up can be optionally

retrofitted, see page 92.12.

92.08 1/2022
BLANCO Built-in sinks stainless steel

Type sketch Description/Planning Type

Built-in sinks stainless steel from cupboard width 60 cm

BLANCO Lantos II 6 S-IF 1 SPL60124E L/R 440
1 large bowl with 3½“ basket valve
with remote control pop-up
2
Bowl depth 170 mm
1 control knob, stainless steel finish
1 small bowl with 3½“ basket valve, 4
manually operable
Diagram shows R Bowl depth 90 mm
1 stainless steel drip tray 5a / 5b
1 combination trap system
Sink with flat rim

Built-in sinks stainless steel from cupboard width 45 cm

BLANCO Lantos 45 S-IF Compact 1 SPL4519E L/R 225
1 bowl with 3½“ basket valve
and remote control pop-up
2
Bowl depth 160 mm
1 control knob, stainless steel finish
1 combination trap system 4
Diagram shows R Sink with flat rim

5a / 5b

Built-in sinks stainless steel from cupboard width 45 cm

BLANCO Lantos 45 S-IF 1 SPL4520E L/R 282
1 bowl with 3½“ basket valve
and remote control pop-up
2
Bowl depth 160 mm
1 control knob, stainless steel finish
1 combination trap system 4
Diagram shows R Sink with flat rim

5a / 5b

Built-in sinks stainless steel from cupboard width 50 cm

BLANCO Lantos 5 S-IF 1 SPL5013E L/R 400
1 large bowl with 3½“ basket valve
with remote control pop-up
2
Bowl depth 155 mm
1 control knob, stainless steel finish
1 small bowl 4
Diagram shows R Bowl depth 42 mm
1 stainless steel drip tray
1 combination trap system 5a / 5b
Sink with flat rim

Built-in sinks stainless steel from cupboard width 60 cm

BLANCO Lantos XL 6 S-IF 1 SPL6065E L/R 372
1 bowl with 3½“ basket valve
and remote control pop-up
2
Bowl depth 160 mm
1 control knob, stainless steel finish
1 combination trap system 4
Diagram shows R Sink with flat rim

5a / 5b

Single bowl stainless steel from cupboard width 45 cm

BLANCO Solis 400-IF/A 1 SPL4528E 369
1 bowl with 3½“ basket valve
with eccentric remote control
2
and concealed overflow,
InFino drainage system
Bowl depth 185 mm 4
1 round press button, stainless steel
appearance
1 combination trap system 5a / 5b
Sink with flat rim

Built-under installation = tap Ø < 55 mm

1/2022 92.09
BLANCO Built-in sinks stainless steel

Type sketch Description/Planning Type

Single bowl stainless steel from cupboard width 60 cm

BLANCO Solis 500-IF/A 1 SPL60105E 406
1 bowl with 3½“ basket valve
with eccentric remote control
2
and concealed overflow,
InFino drainage system
Bowl depth 185 mm 4
1 round press button, stainless steel
appearance
1 combination trap system 5a / 5b
Sink with flat rim

Built-under installation = tap Ø < 55 mm

Built-in sinks stainless steel from cupboard width 60 cm

BLANCO Solis 340/180-IF/A 1 SPL60106E 599
1 large bowl with 3½“ basket valve
with remote control pop-up and
2
concealed overflow,
InFino drainage system
Bowl depth 185 mm 4
1 round press button, stainless steel
appearance
1 small bowl with 3½“ basket valve, 5a / 5b
InFino drainage system
manually operable
Bowl depth 125 mm
1 combination trap system
Sink with flat rim

Built-under installation = tap Ø < 55 mm

Single bowl stainless steel from cupboard width 45 cm

BLANCO Solis 400-IF 1 SPL4529E 308
1 bowl with 3½“ basket valve
and concealed overflow,
2
InFino drainage system
manually operable
Bowl depth 185 mm 4
1 combination trap system
Sink with flat rim
5a / 5b
Remote control pop-up can be optionally
retrofitted, see page 92.12.

Single bowl stainless steel from cupboard width 50 cm

BLANCO Solis 450-IF 1 SPL5016E 320
1 bowl with 3½“ basket valve
and concealed overflow,
2
InFino drainage system
manually operable
Bowl depth 185 mm 4
1 combination trap system
Sink with flat rim
5a / 5b
Remote control pop-up can be optionally
retrofitted, see page 92.12.

Single bowl stainless steel from cupboard width 60 cm

BLANCO Solis 500-IF 1 SPL60107E 332
1 bowl with 3½“ basket valve
and concealed overflow,
2
InFino drainage system
manually operable
Bowl depth 185 mm 4
1 combination trap system
Sink with flat rim
5a / 5b
Remote control pop-up can be optionally
retrofitted, see page 92.12.

92.10 1/2022
BLANCO Built-in sinks stainless steel

Type sketch Description/Planning Type

Built-in sinks stainless steel from cupboard width 60 cm

BLANCO Solis 340/180-IF 1 SPL60108E L/R 500
1 large bowl with 3½“ basket valve
and concealed overflow,
2
InFino drainage system
manually operable
Bowl depth 185 mm 4
1 small bowl with 3½“ basket valve,
Diagram shows R InFino drainage system
manually operable 5a / 5b
Bowl depth 125 mm
1 combination trap system
Sink with flat rim

Remote control pop-up can be optionally

retrofitted, see page 92.12.

Single bowl stainless steel from cupboard width 45 cm

BLANCO Solis 400-U 3a / 3b SPL4530E 258
1 bowl with 3½“ basket valve
and concealed overflow,
InFino drainage system 4
manually operable
Bowl depth 185 mm
1 combination trap system

Remote control pop-up can be optionally

retrofitted, see page 92.12.

Single bowl stainless steel from cupboard width 50 cm

BLANCO Solis 450-U 3a / 3b SPL5017E 271
1 bowl with 3½“ basket valve
and concealed overflow,
InFino drainage system 4
manually operable
Bowl depth 185 mm
1 combination trap system

Remote control pop-up can be optionally

retrofitted, see page 92.12.

Single bowl stainless steel from cupboard width 60 cm

BLANCO Solis 500-U 3a / 3b SPL60109E 283
1 bowl with 3½“ basket valve
and concealed overflow,
InFino drainage system 4
manually operable
Bowl depth 185 mm
1 combination trap system

Remote control pop-up can be optionally

retrofitted, see page 92.12.

Built-in sinks stainless steel from cupboard width 60 cm

BLANCO Solis 340/180-U 3a / 3b SPL60123E L/R 418
1 large bowl with 3½“ basket valve
and concealed overflow,
InFino drainage system 4
manually operable
Bowl depth 185 mm
1 small bowl with 3½“ basket valve,
Diagram shows L InFino drainage system
manually operable
Bowl depth 125 mm
1 combination trap system

Remote control pop-up can be optionally

retrofitted, see page 92.12.

1/2022 92.11
BLANCO Built-in sinks stainless steel

Type sketch Description/Planning Type

Retrofit set remote control pop-up InFino ZNIF 18

For retrofitting of remote control pop-up
for sinks with InFino drainage system.
It is essential to order a knob ZNIC,
ZNIES, ZNIDE or ZNIP in addition.

BLANCO chrome pop-up knob ZNIC 25

Drill hole diameter 14 mm essential
Can be combined with every InFino sink.
Only possible in combination with ZNIF.

BLANCO pop-up knob ZNIES 50

stainless steel satin finish
Drill hole diameter 14 mm essential
Can be combined with every InFino sink.
Only possible in combination with ZNIF.

BLANCO round knob ZNIDE 20

stainless steel appearance
Drill hole diameter 35 mm essential
Can be combined with every InFino sink.
Only possible in combination with ZNIF.

BLANCO press button ZNIP 34

stainless steel appearance
Drill hole diameter 35 mm essential
Can be combined with every InFino sink.
Only possible in combination with ZNIF.

BLANCO black overflow set ZUSS 118

Drill hole diameter 14 mm essential
Can be combined with every InFino sink.
Preferably to be used with a Silgranit sink.

BLANCO Built-in sinks Silgranit

Type sketch Description/Planning Type

Single bowl Silgranit from cupboard width 45 cm

BLANCO Dalago 45 1 SPL456G 367
1 bowl with 3½“ basket valve
and remote control pop-up
3a / 3b
Bowl depth 190 mm
1 control knob, stainless steel finish
1 combination trap system
Inner radius 15 mm 4

Please state colour, see page 92.01.

Single bowl Silgranit from cupboard width 50 cm

BLANCO Dalago 5 1 SPL503G 412
1 bowl with 3½“ basket valve
and remote control pop-up
3a / 3b
Bowl depth 190 mm
1 control knob, stainless steel finish
1 combination trap system
Inner radius 15 mm 4

Please state colour, see page 92.01.

92.12 1/2022
BLANCO Built-in sinks Silgranit

Type sketch Description/Planning Type

Single bowl Silgranit from cupboard width 60 cm

BLANCO Dalago 6 1 SPL608G 440
1 bowl with 3½“ basket valve
and remote control pop-up
3a / 3b
Bowl depth 190 mm
1 control knob, stainless steel finish
1 combination trap system
Inner radius 15 mm 4

Please state colour, see page 92.01.

Single bowl Silgranit from cupboard width 60 cm

BLANCO Etagon 500-U 3a / 3b SPL60104G 436
1 bowl with 3½“ basket valve
and concealed overflow,
InFino drainage system 4
manually operable
Bowl depth 200 mm
2 support rails for Etagon
1 combination trap system
Inner radius 20 mm

Please state colour, see page 92.01.

Remote control pop-up can be optionally
retrofitted, see page 92.12.

Sink Silgranit from cupboard width 45 cm

BLANCO Metra 45 S 1 SPL454G L/R 266
1 bowl with 3½“ basket valve
and remote control pop-up
4
Bowl depth 190 mm
1 control knob, stainless steel finish
1 combination trap system
Diagram shows R Inner radius 8 mm

Please state colour, see page 92.01.

Sink Silgranit from cupboard width 50 cm

BLANCO Metra 5 S 1 SPL501G L/R 383
1 bowl with 3½“ basket valve
and remote control pop-up
4
Bowl depth 190 mm
1 control knob, stainless steel finish
1 combination trap system
Diagram shows R Inner radius 8 mm

Please state colour, see page 92.01.

Sink Silgranit from cupboard width 60 cm

BLANCO Metra 6 S 1 SPL606G L/R 457
1 large bowl with 3½“ basket valve
with remote control pop-up
4
Bowl depth 190 mm
1 control knob, stainless steel finish
1 small bowl with 3½“ basket valve,
Diagram shows R manually operable
Bowl depth 130 mm
1 stainless steel multi-function bowl
1 combination trap system
Inner radius 8 mm

Please state colour, see page 92.01.

Single bowl Silgranit from cupboard width 60 cm

BLANCO Subline 500-U 3a / 3b SPL60103G 354
1 bowl with 3½“ basket valve
and concealed overflow,
InFino drainage system 4
manually operable
Bowl depth 190 mm
1 combination trap system

Please state colour, see page 92.01.

Remote control pop-up can be optionally
retrofitted, see page 92.12.

1/2022 92.13
BLANCO Taps

Type sketch Description/Planning Type

Tap ARCUSM 693

BLANCO Culina S Mini
pullout shower hose in metal casing with
backflow prevention
stainless steel look
high pressure
swivel range 360°
Height 43.4 cm / spout projection 20.2 cm
Tap hole with Ø 35 mm essential
Flexible connecting hoses 45 cm long

Wall distance to centre drill hole for taps

min. 4 cm.

Tap ARLI 239

BLANCO Linus
chrome
high pressure
swivel range 360°
Height 28.2 cm / spout projection 22.0 cm
Tap hole with Ø 35 mm essential
Flexible connecting hoses 45 cm long

Wall distance to centre drill hole for taps

min. 4 cm.

Tap ARLIS 286

BLANCO Linus-S
extendible spray head hose
chrome
high pressure
swivel range 140°
Height 28.4 cm / spout projection 21.9 cm
Tap hole with Ø 35 mm essential
Flexible connecting hoses 45 cm long

Wall distance to centre drill hole for taps

min. 4 cm.

92.14 1/2022
FRANKE Built-in sinks stainless steel

Type sketch Description/Planning Type

Built-in sinks stainless steel from cupboard width 45 cm

FRANKE Argos AGX 211 1 SPL4542E L/R 343
1 bowl with 3½“ basket valve (integral)
with eccentric remote control
2
and covered overflow
Bowl depth 175 mm
1 round press button, stainless steel 4
Diagram shows R
1 combination trap system
Sink with flat rim
5a / 5b

Built-in sinks stainless steel from cupboard width 60 cm

FRANKE Argos AGX 211-100 1 SPL6094E L/R 403
1 bowl with 3½“ basket valve (integral)
with eccentric remote control
2
and covered overflow
Bowl depth 180 mm
1 round press button, stainless steel 4
Diagram shows R
1 combination trap system
Sink with flat rim
5a / 5b

Built-in sinks stainless steel from cupboard width 60 cm

FRANKE Argos G AGX 251 G 1 SPL6093E L/R 471
1 large bowl with 3½“ basket valve (integral)
with remote control pop-up and
2
concealed overflow
Bowl depth 175 mm
1 round press button, stainless steel 4
Diagram shows R
1 small bowl with 3½“ basket valve,
manually operable
Bowl depth 120 mm 5a / 5b
1 stainless steel drip tray
1 combination trap system
Sink with flat rim

Single bowl stainless steel from cupboard width 60 cm

FRANKE Bell BCX 610-51 1 SPL60115E 161
1 bowl with 3½“ basket valve
with eccentric remote control
2
and covered overflow
Bowl depth 200 mm
1 control knob, stainless steel finish 4
1 combination trap system
Sink with flat rim
5a / 5b

Single bowl stainless steel 430 0 from cupboard width 45 cm

Ø 35 150 R1 1
FRANKE Box BXX 210-40 TL Standard outlet
1 bowl with 3½“ basket valve SPL4522E 498
45

with eccentric remote control

2
510

and covered overflow

410

Integral outlet
56

Bowl depth 200 mm R12 SPLI4522E 554

5

1 control knob, stainless steel finish 400 5a / 5b

1 combination trap system
Sink with flat rim
Inner radius 12 mm

Single bowl stainless steel 530

65
from cupboard width 60 cm
FRANKE Box BXX 210-50 TL Ø3
5 200 R10 1 Standard outlet
1 bowl with 3½“ basket valve SPL6066E 520
45

with eccentric remote control

2
510

and covered overflow 63 Integral outlet

410

9
Bowl depth 200 mm R12
SPLI6066E 577
1 control knob, stainless steel finish 5a / 5b
500
1 combination trap system
Sink with flat rim
Inner radius 12 mm

1/2022 92.15
FRANKE Built-in sinks stainless steel

Type sketch Description/Planning Type

Built-in sinks stainless steel 570 from cupboard width 60 cm

Ø3 65
FRANKE Box BXX 260-36-16 TL 5 320 R10 1 Standard outlet
1 large bowl with 3½“ basket valve SPL6067E 854

45
with remote control pop-up and
2

510
concealed overflow Integral outlet

410
53
Bowl depth 200 mm 2 SPLI6067E 968
R1

6
1 control knob, stainless steel finish 5a / 5b
1 small bowl with 3½“ basket valve 20
160 360
and concealed overflow,
manually operable
Bowl depth 140 mm
1 combination trap system
Sink with flat rim
Inner radius 12 mm

Single bowl stainless steel 200 from cupboard width 30 cm

FRANKE Box BXX 210/110-16 1 Integral outlet
1 bowl with 3½“ basket valve (integral) SPLI305E 338
manually operable

410
450
2
Bowl depth 140 mm
1 combination trap system
Sink with flat rim 3a / 3b
Inner radius 12 mm 160

5a / 5b

Single bowl stainless steel 3 from cupboard width 45 cm

FRANKE Box BXX 210/110-34 380 R1 1 Standard outlet
1 bowl with 3½“ basket valve SPL405E 332
with eccentric remote control
2
and covered overflow
410
450

Integral outlet
52

Bowl depth 200 mm 2 SPLI405E 382

R1
3

1 round pull-up knob, stainless steel 3a / 3b

(diameter 18 mm drill hole)
1 combination trap system 340
Sink with flat rim 4
Inner radius 12 mm

5a / 5b

Single bowl stainless steel 3 from cupboard width 60 cm

FRANKE Box BXX 210/110-45 490 R1 1 Standard outlet
1 bowl with 3½“ basket valve SPL6069E 347
with eccentric remote control
2
59
410
450

and covered overflow Integral outlet

2 9
Bowl depth 200 mm R1 SPLI6069E 404
1 round pull-up knob, stainless steel 3a / 3b
(diameter 18 mm drill hole) 450
1 combination trap system
Sink with flat rim 4
Inner radius 12 mm

5a / 5b

Single bowl stainless steel 3 from cupboard width 60 cm

FRANKE Box BXX 210/110-50 540 R1 1 Standard outlet
1 bowl with 3½“ basket valve SPL6068E 377
with eccentric remote control
63 2
410
450

and covered overflow 7 Integral outlet

2
Bowl depth 200 mm R1 SPLI6068E 427
1 round pull-up knob, stainless steel 3a / 3b
(diameter 18 mm drill hole) 500
1 combination trap system
Sink with flat rim 4
Inner radius 12 mm

5a / 5b

92.16 1/2022
FRANKE Built-in sinks stainless steel

Type sketch Description/Planning Type

Built-in sinks stainless steel 3 from cupboard width 60 cm

FRANKE Box BXX 260/160-34-16 560 R1 1 Standard outlet
1 large bowl with 3½“ basket valve SPL6070E 663
with remote control pop-up and
2
concealed overflow

410
Integral outlet

450
52
Bowl depth 200 mm 2 SPLI6070E 770
R1

3
1 round pull-up knob, stainless steel 3a / 3b
(diameter 18 mm drill hole) 160 20 340
1 small bowl with 3½“ basket valve
and concealed overflow, 4
manually operable
Bowl depth 140 mm
1 combination trap system 5a / 5b
Sink with flat rim
Inner radius 12 mm

Single bowl stainless steel 384 from cupboard width 40 cm

FRANKE Epos EOX 110-36 3a / 3b SPL406E 211
1 bowl with 3½“ basket valve (integral)

415
390
with eccentric remote control
and covered overflow R50 4
Bowl depth 175 mm
1 round pull-up knob, stainless steel 360
(diameter 18 mm drill hole)
1 combination trap system

Single bowl stainless steel 470 from cupboard width 50 cm

FRANKE Epos EOX 110-45 3a / 3b SPL5014E 220
1 bowl with 3½“ basket valve (integral)
415
with remote control pop-up and
390

concealed overflow R50 4

Bowl depth 175 mm
1 round pull-up knob, stainless steel 445
(diameter 18 mm drill hole)
1 combination trap system

Single bowl stainless steel 530 5 from cupboard width 60 cm

R6 3a / 3b
FRANKE Epos EOX 110-50 SPL6076E 300
1 bowl with 3½“ basket valve (integral)
with eccentric remote control
410
440

and covered overflow 4

0
R5

Bowl depth 175 mm

1 round pull-up knob, stainless steel 500
(diameter 18 mm drill hole)
1 combination trap system

Built-in sinks stainless steel from cupboard width 45 cm

FRANKE Euroform EFX 614-78 1 SPL453E L/R 157
1 bowl with 3½“ basket valve
and remote control pop-up
Bowl depth 150 mm
1 control knob, stainless steel finish
1 combination trap system
Diagram shows R

Built-in sinks stainless steel from cupboard width 45 cm

FRANKE Hydros HDX 214 1 SPL4527E L/R 376
1 bowl with 3½“ basket valve (integral)
with remote control pop-up and
2
concealed overflow
Bowl depth 180 mm
1 round press button, stainless steel 5a / 5b
Diagram shows R 1 combination trap system
Sink with flat rim

1/2022 92.17
FRANKE Built-in sinks stainless steel

Type sketch Description/Planning Type

Built-in sinks stainless steel from cupboard width 60 cm

FRANKE Hydros HDX 254 1 SPL6075E L/R 532
1 large bowl with 3½“ basket valve (integral)
with remote control pop-up and
2
concealed overflow
Bowl depth 180 mm
1 round press button, stainless steel 5a / 5b
Diagram shows R 1 small bowl with 3½“ basket valve (integral),
manually operable
Bowl depth 120 mm
1 stainless steel drip tray
1 combination trap system
Sink with flat rim

Single bowl stainless steel from cupboard width 60 cm

FRANKE Maris MRX 210-50 A 1 SPL6086E 378
1 bowl with 3½“ basket valve
with remote control pop-up and
2
concealed overflow
Bowl depth 180 mm
1 control knob, stainless steel finish 5a / 5b
1 combination trap system
Sink with flat rim
Inner radius 16 mm
Surface satin finish

Single bowl stainless steel from cupboard width 60 cm

FRANKE Maris MRX 210-50 1 SPL6085E 311
1 bowl with 3½“ basket valve
with remote control pop-up and
2
concealed overflow
Bowl depth 180 mm
1 control knob, stainless steel finish 5a / 5b
(diameter 35 mm drill hole)
1 combination trap system
Sink with flat rim
Inner radius 16 mm
Surface satin finish

Single bowl stainless steel from cupboard width 60 cm

FRANKE Mythos MYX 110-50 3a / 3b SPL6097E 488
1 bowl with 3½“ basket valve (integral)
with eccentric remote control
and covered overflow
Bowl depth 200 mm
1 round press button, stainless steel
(diameter 35 mm drill hole)
1 combination trap system
Inner radius 25 mm

Single bowl stainless steel from cupboard width 60 cm

FRANKE Mythos MYX 210-50 1 SPL6098E 613
1 bowl with 3½“ basket valve (integral)
with eccentric remote control
and covered overflow
Bowl depth 200 mm
1 round press button, stainless steel
(diameter 35 mm drill hole)
1 combination trap system
Sink with flat rim
Inner radius 25 mm

Built-in sinks stainless steel 860 from cupboard width 60 cm

0
FRANKE Mythos MYX 211-86 A Ø3
5
151 279 R1 1 SPL60114E L/R 745
1 bowl with 3½“ basket valve (integral)
44,8

with eccentric remote control

2
and covered overflow
520
400

Bowl depth 180 mm 5

R2
1 round press button, stainless steel 4
1 combination trap system
500
Diagram shows R Sink with flat rim
5a / 5b

92.18 1/2022
FRANKE Built-in sinks stainless steel

Type sketch Description/Planning Type

Built-in sinks stainless steel 860 from cupboard width 60 cm

FRANKE Mythos MYX 251-86 A Ø3 0 1 SPL60113E L/R 912
5 187,5 199 R1
1 large bowl with 3½“ basket valve (integral)

44,8
with remote control pop-up and
2
concealed overflow

520
400
Bowl depth 200 mm 5
1 round press button, stainless steel R2
4
1 small bowl with 3½“ basket valve (integral),
160 340
Diagram shows R manually operable
Bowl depth 150 mm 5a / 5b
1 combination trap system
Sink with flat rim

Built-in sinks stainless steel 860 from cupboard width 45 cm

FRANKE Spark SKX 611-86 Ø3
5
420 R8 1 SPL4525E L/R 116

60
1 bowl with 3½“ basket valve
and remote control pop-up

46

420
500
Bowl depth 160 mm

8
1 control knob, stainless steel finish R80

1 combination trap system 340

Diagram shows R

Built-in sinks stainless steel 1000 from cupboard width 60 cm

FRANKE Spark SKX 651 Ø3 420 R8 1 SPL6073E L/R 205

60
5
1 large bowl with 3½“ basket valve
and remote control pop-up

46
280

420
500
Bowl depth 160 mm

7
R80
1 control knob, stainless steel finish
1 small bowl with 3½“ basket valve,
Diagram shows R 170 340
manually operable
Bowl depth 80 mm
1 stainless steel strainer bowl
1 combination trap system

1/2022 92.19
FRANKE Built-in sinks Fragranit

Type sketch Description/Planning Type

Built-in sink Fragranit 780 +03 from cupboard width 45 cm

FRANKE Centro CNG 611-78 401 1 SPL4531G L/R 311
Ø 5
1 bowl with 3½“ basket valve 35 Pre drilled R1

with remote control pop-up and

76
2
concealed overflow

~5
Bowl depth 200 mm

500 +20
~435
34
1 control knob, stainless steel finish R2
0 4
1 combination trap system
Diagram shows R Inner radius 20 mm ~342
6
Please state colour, see page 92.01.

Built-in sink Fragranit 860 +03 from cupboard width 50 cm

FRANKE Centro CNG 611-86 451 1 SPL5018G L/R 332
5
1 bowl with 3½“ basket valve Pre drilled
R1

Ø
35
with remote control pop-up and

76
2
concealed overflow

~5

500 +20
~435
Bowl depth 200 mm

65
1 control knob, stainless steel finish R2
0
4
1 combination trap system
~392
Diagram shows R Inner radius 20 mm
6
Please state colour, see page 92.01.

Built-in sink Fragranit 1000 +03 from cupboard width 60 cm

FRANKE Centro CNG 611-100 551 1 SPL60111G L/R 353
1 bowl with 3½“ basket valve Ø Pre drilled
R1
5
35

with remote control pop-up and

76

2
concealed overflow ~6
35
Bowl depth 200 mm
500 +20
~435

1 control knob, stainless steel finish R2

0
4
1 combination trap system
Diagram shows R Inner radius 20 mm ~492

6
Please state colour, see page 92.01.

Single bowl Fragranit from cupboard width 45 cm

FRANKE Kubus 2 KNG 110-37 3a / 3b SPL4541G 322
1 bowl with 3½“ basket valve
with remote control pop-up and
concealed overflow 4
Bowl depth 200 mm
1 round press button, stainless steel
(diameter 35 mm drill hole)
1 combination trap system
Inner radius 10 mm
incorporated step as a second work level

Please state colour, see page 92.01.

Single bowl Fragranit from cupboard width 60 cm

FRANKE Kubus 2 KNG 110-52 3a / 3b SPL6088G 366
1 bowl with 3½“ basket valve
with remote control pop-up and
concealed overflow 4
Bowl depth 200 mm
1 round press button, stainless steel
(diameter 35 mm drill hole)
1 combination trap system
Inner radius 10 mm
incorporated step as a second work level

Please state colour, see page 92.01.

92.20 1/2022
FRANKE Built-in sinks Fragranit

Type sketch Description/Planning Type

Single bowl Fragranit 440 +30 from cupboard width 45 cm

FRANKE Maris MRG 610-39 A 220 1 SPL4532G 278
1 bowl with 3½“ basket valve 115 115
5
with remote control pop-up and R1

35
2

Ø
concealed overflow
Bowl depth 200 mm

42
1 control knob, stainless steel finish

500 +20
6

~400
1 combination trap system

~5
40
Inner radius 20 mm R20

~390
Please state colour, see page 92.01.

Single bowl Fragranit 590 +03 from cupboard width 60 cm

FRANKE Maris MRG 610-54 A 295
1 SPL60112G 311
1 bowl with 3½“ basket valve 80 115 115 80
with remote control pop-up and
35 R1
5 2
concealed overflow Ø
Bowl depth 200 mm

42
1 control knob, stainless steel finish 6
1 combination trap system

500 +20
~6

~400
54
Inner radius 20 mm
R20

Please state colour, see page 92.01.

~540

Built-in sink Fragranit 780 from cupboard width 45 cm

FRANKE Maris MRG 611 265 1 SPL451G L/R 266
1 bowl with 3½“ basket valve 415
42,5

37,5
and remote control pop-up
Bowl depth 200 mm
1 control knob, stainless steel finish
425
500
1 combination trap system
Diagram shows R Inner radius 10 mm
37,5

Please state colour, see page 92.01. 350 30

Built-in sink Fragranit 970 from cupboard width 60 cm

42,5

FRANKE Maris MRG 611-100 515 1 SPL602G L/R 270

1 bowl with 3½“ basket valve
and remote control pop-up
Bowl depth 200 mm
425
500

1 control knob, stainless steel finish

1 combination trap system
Diagram shows R Inner radius 10 mm
38

450 30
Please state colour, see page 92.01.

Built-in sink Fragranit from cupboard width 60 cm

FRANKE Maris MRG 611-100 XL 1 SPL6018G L/R 326
1 bowl with 3½“ basket valve
with remote control pop-up and
concealed overflow
Bowl depth 200 mm
1 control knob, stainless steel finish
Diagram shows R 1 combination trap system
Inner radius 10 mm

Please state colour, see page 92.01.

1/2022 92.21
FRANKE Built-in sinks Fragranit

Type sketch Description/Planning Type

Built-in sink Fragranit 970 from cupboard width 60 cm

FRANKE Maris MRG 651 225 265 1 SPL601G L/R 332
1 large bowl with 3½“ basket valve 415

42,5

37,5
with remote control pop-up
Bowl depth 200 mm
1 control knob, stainless steel finish

302
425
500
1 small bowl with 3½“ basket valve,
Diagram shows R manually operable
Bowl depth 120 mm

37,5
1 stainless steel drip tray 160 30 350 30
1 combination trap system
Inner radius 10 mm

Please state colour, see page 92.01.

Built-in sink Fragranit 780 from cupboard width 45 cm

FRANKE Strata STG 614-78 409,5 1 SPL453G L/R 178
1 bowl with 3½“ basket valve 159 R15

40
and remote control pop-up
Bowl depth 165 mm

360
435
1 control knob, stainless steel finish
1 combination trap system
Diagram shows R
Inner radius 20 mm
332,5 37,5
Please state colour, see page 92.01.
Colour 649 black matt available from February 2022.

Built-in sink Fragranit from cupboard width 50 cm

FRANKE Urban UBG 611-86 1 SPL5056G L/R 279
1 bowl with 3½“ basket valve
with remote control pop-up and
4
concealed overflow
Bowl depth 220 mm
Diagram shows R 1 control knob, stainless steel finish 6
1 combination trap system
1 plastic draining bowl

Please state colour, see page 92.01.

Built-in sink Fragranit from cupboard width 60 cm

FRANKE Urban UBG 611-100 1 SPL6021G L/R 292
1 bowl with 3½“ basket valve
with remote control pop-up and
4
concealed overflow
Bowl depth 220 mm
Diagram shows R 1 control knob, stainless steel finish 6
1 combination trap system
1 plastic draining bowl

Please state colour, see page 92.01.

92.22 1/2022
FRANKE Taps

Type sketch Description/Planning Type

Tap FRANKE ARLINZ 141

Lina pullout spout
extendible pullout spout
chrome
swivel range 150°
Height 36.0 cm / spout projection 21.5 cm
Tap hole with Ø 35 mm essential
Flexible connecting hoses 45 cm long

Tap FRANKE ARLIN 99

Lina fixed flow outlet
chrome
swivel range 360°
Height 33.0 cm / spout projection 19.5 cm
Tap hole with Ø 35 mm essential
Flexible connecting hoses 45 cm long

Tap FRANKE ARAPZ 368

Active Plus pullout spout
extendible spray head hose
high pressure
swivel range 360°
Operating element right
Height 31 cm / spout projection 23.6 cm
Tap hole with Ø 35 mm essential
Flexible connecting hoses 45 cm long
Available in colours:
649 black matt

Tap FRANKE ARATN 206

Atlas Neo fixed flow outlet
stainless steel
high pressure
swivel range 180°
Operating element right
Height 29.7 cm / spout projection 22.5 cm
Tap hole with Ø 35 mm essential
Flexible connecting hoses 45 cm long
Laminar beam

Tap FRANKE ARATNZ 238

Atlas Neo pullout spout
extendible pullout spout
stainless steel
high pressure
swivel range 180°
Operating element right
Height 29.7 cm / spout projection 22.5 cm
Tap hole with Ø 35 mm essential
Flexible connecting hoses 45 cm long
Laminar beam

Foldable tap FRANKE ARATNW 238

Atlas Neo Window fixed flow outlet
stainless steel
high pressure
swivel range 180°
Operating element right
Height 29.7 cm / spout projection 22.5 cm
Tap hole with Ø 35 mm essential
Flexible connecting hoses 80 cm long
Laminar beam

1/2022 92.23
FRANKE Taps

Type sketch Description/Planning Type

Foldable tap FRANKE ARATNWZ 270

Atlas Neo Window pullout spout
extendible pullout spout
stainless steel
high pressure
swivel range 180°
Operating element right
Height 29.7 cm / spout projection 22.5 cm
Tap hole with Ø 35 mm essential
Flexible connecting hoses 80 cm long
Laminar beam

Tap FRANKE AREN 204

Eos Neo fixed flow outlet
stainless steel
high pressure
swivel range 180°
Operating element right
Height 38.7 cm / spout projection 22.9 cm
Tap hole with Ø 35 mm essential
Flexible connecting hoses 45 cm long
Laminar beam

Tap FRANKE ARENZ 311

Eos Neo pullout spout
extendible spray head hose
stainless steel
high pressure
swivel range 180°
Operating element right
Height 43.3 cm / spout projection 23.1 cm
Tap hole with Ø 35 mm essential
Flexible connecting hoses 45 cm long

Tap FRANKE AROR 204

Orbit fixed flow outlet
stainless steel
high pressure
swivel range 360°
Height 20.8 cm / spout projection 20.9 cm
Tap hole with Ø 35 mm essential
Flexible connecting hoses 45 cm long
Laminar beam

Tap FRANKE ARORZ 236

Orbit pullout spout
extendible pullout spout
stainless steel
high pressure
swivel range 120°
Height 20.9 cm / spout projection 20.9 cm
Tap hole with Ø 35 mm essential
Flexible connecting hoses 45 cm long
Laminar beam

92.24 1/2022
FRANKE Taps

Type sketch Description/Planning Type

Tap ARPEL 356

FRANKE Pescara L
pullout hose shower,
metal spring encased
stainless steel
swivel range 360°
Operating element right
Height 42 cm / spout projection 20 cm
Tap hole with Ø 35 mm essential
Flexible connecting hoses 42 cm long

Tap ARPEXL 400

FRANKE Pescara XL
pullout hose shower,
metal spring encased
stainless steel
swivel range 360°
Operating element right
Height 55 cm / spout projection 23.5 cm
Tap hole with Ø 35 mm essential
Flexible connecting hoses 42 cm long

FRANKE Accessories

Type sketch Description/Planning Type

Drip tray CMXABT 87

Box
stainless steel
Size 15.3 x 40.8 x 5.8 cm

Roll mat CMXRM 69

Box
stainless steel
Size 47 x 44 cm

Preparation surface CMXRBK 131

Box
plastic anti bacterial
Size 19.8 x 46.5 cm

Drip tray CMXTT 102

Box
stainless steel plastic
Size 32.6 x 44 cm

1/2022 92.25
 Style
SYSTEMCERAM Built-in sinks ceramic

Type sketch Description/Planning Type SC1 SC2 CP1 CP2

Built-in sink ceramic from cupboard width 45 cm
SYSTEMCERAM Bela 78 1 SPL451K L/R 542 583 598 639
1 bowl with 3½“ basket valve
and remote control pop-up
Bowl depth 200 mm
1 control knob, stainless steel finish
Diagram shows R 1 combination trap system
Inner radius 10 mm

Please state colour, see page 92.02.

Built-in sink ceramic from cupboard width 45 cm

SYSTEMCERAM Bela 78 F 6 SPL452K L/R 655 708 711 764
1 bowl with 3½“ basket valve
and remote control pop-up
Bowl depth 200 mm
1 control knob, stainless steel finish
Diagram shows R
(diameter 35 mm drill hole)
1 combination trap system
Inner radius 10 mm

Please state colour, see page 92.02.

Built-in sink ceramic from cupboard width 60 cm

SYSTEMCERAM Genea 100 1 SPL60102K L/R 657 720 713 776
1 large bowl with 3½“ basket valve
and remote control pop-up
Bowl depth 200 mm
1 control knob, stainless steel finish
Diagram shows R
1 small bowl with 1½“ basket valve
manually operable
Bowl depth 135 mm
1 combination trap system

Please state colour, see page 92.02.

Single bowl ceramic from cupboard width 50 cm

SYSTEMCERAM Mera 51 1 SPL5019K 468 511 524 567
1 bowl with 3½“ basket valve
and remote control pop-up
Bowl depth 200 mm
1 control knob, stainless steel finish
(diameter 35 mm drill hole)
1 combination trap system

Please state colour, see page 92.02.

Single bowl ceramic from cupboard width 50 cm

SYSTEMCERAM Mera 51 F 6 SPL5020K 510 556 566 612
1 bowl with 3½“ basket valve
with eccentric remote control
and covered overflow
Bowl depth 200 mm
1 control knob, stainless steel finish
1 combination trap system

Please state colour, see page 92.02.

Drill hole for taps existing

The eccentric hole is drilled in the standard position A (see dimension sketch).
Please state if a different position is desired.

92.26 1/2022
 Style
SYSTEMCERAM Built-in sinks ceramic

Type sketch Description/Planning Type SC1 SC2 CP1 CP2

Single bowl ceramic from cupboard width 60 cm
SYSTEMCERAM Mera 57 1 SPL60101K 495 540 551 596
1 bowl with 3½“ basket valve
and remote control pop-up
Bowl depth 200 mm
1 control knob, stainless steel finish
(diameter 35 mm drill hole)
1 combination trap system

Please state colour, see page 92.02.

Single bowl ceramic from cupboard width 60 cm

SYSTEMCERAM Mera 57 F 6 SPL6090K 618 666 674 722
1 bowl with 3½“ basket valve
with eccentric remote control
and covered overflow
Bowl depth 200 mm
1 control knob, stainless steel finish
1 combination trap system
Inner radius 10 mm

Please state colour, see page 92.02.

Built-in sink ceramic from cupboard width 50 cm

SYSTEMCERAM Mera 90 1 SPL501K L/R 541 591 597 647
1 bowl with 3½“ basket valve
and remote control pop-up
Bowl depth 200 mm
1 control knob, stainless steel finish
Diagram shows R 1 combination trap system
Inner radius 10 mm

Please state colour, see page 92.02.

Built-in sink ceramic from cupboard width 50 cm

SYSTEMCERAM Mera 90 F 6 SPL503K L/R 661 715 717 771
1 bowl with 3½“ basket valve
and remote control pop-up
Bowl depth 200 mm
1 control knob, stainless steel finish
Diagram shows R
1 combination trap system
Inner radius 10 mm

Please state colour, see page 92.02.

Built-in sink ceramic from cupboard width 60 cm

SYSTEMCERAM Mera 100 SL 1 SPL6010K L/R 635 693 691 749
1 bowl with 3½“ basket valve
and remote control pop-up
Bowl depth 200 mm
1 control knob, stainless steel finish
Diagram shows R
1 combination trap system
Inner radius 10 mm

Please state colour, see page 92.02.

Built-in sink ceramic from cupboard width 60 cm

SYSTEMCERAM Mera 100 SL F 6 SPL6013K L/R 754 811 810 867
1 bowl with 3½“ basket valve
and remote control pop-up
Bowl depth 200 mm
1 control knob, stainless steel finish
Diagram shows R
1 combination trap system
Inner radius 10 mm

Please state colour, see page 92.02.

Drill hole for taps existing

The eccentric hole is drilled in the standard position A (see dimension sketch).
Please state if a different position is desired.

1/2022 92.27
CARESSI Built-in sinks stainless steel

Type sketch Description/Planning Type

Single bowl stainless steel from cupboard width 45 cm

CARESSI CAPP40R10 1 SPL4533E 222
1 bowl with 3½“ basket valve (integral)
and concealed overflow,
2
manually operable
Bowl depth 185 mm
1 combination trap system 3a / 3b
Inner radius 10 mm

5a / 5b

Single bowl stainless steel from cupboard width 60 cm

CARESSI CAPP50R10 1 SPL60116E 236
1 bowl with 3½“ basket valve (integral)
and concealed overflow,
2
manually operable
Bowl depth 185 mm
1 combination trap system 3a / 3b
Inner radius 10 mm

Remote control pop-up can be optionally 4

retrofitted, see page 92.29.

5a / 5b

Built-in sinks stainless steel from cupboard width 60 cm

CARESSI CAPP3415R10 1 SPL60117E L/R 362
1 large bowl with 3½“ basket valve (integral)
and concealed overflow,
2
manually operable
Bowl depth 185 mm
1 small bowl with 3½“ basket valve (integral), 3a / 3b
Diagram shows R manually operable
Bowl depth 130 mm
1 combination trap system 4
Inner radius 10 mm

Remote control pop-up can be optionally 5a / 5b

retrofitted, see page 92.29.

Single bowl stainless steel from cupboard width 60 cm

CARESSI CAPP50KR10 1 SPL60118E 247
1 bowl with 3½“ basket valve (integral)
and concealed overflow,
2
manually operable
Bowl depth 185 mm
1 combination trap system 4
Inner radius 10 mm

Built-under installation = tap Ø < 50 mm 5a / 5b

Single bowl stainless steel from cupboard width 60 cm

CARESSI CAPP50KR10 1 SPLA60118E 247
with excentre drill hole
1 bowl with 3½“ basket valve (integral)
2
and concealed overflow,
manually operable
Bowl depth 185 mm 4
1 combination trap system
Inner radius 10 mm
5a / 5b
Remote control pop-up can be retrofitted
see page 92.29.
Built-under installation = tap Ø < 50 mm

92.28 1/2022
CARESSI Built-in sinks artificial stone

Type sketch Description/Planning Type

Single bowl artificial stone from cupboard width 60 cm

CARESSI CAGRPP50BKFL 2 SPL60119G 326
Colour black
1 bowl with 3½“ basket valve (integral) 6
and concealed overflow,
manually operable
Bowl depth 185 mm
1 combination trap system
Inner radius 10 mm

Remote control pop-up can be optionally

retrofitted, see page 92.29.

Single bowl artificial stone from cupboard width 60 cm

CARESSI CAGRPP50BKTU 1 SPL60121G 326
Colour black
1 bowl with 3½“ basket valve (integral)
3a / 3b
and concealed overflow,
manually operable
Bowl depth 185 mm
1 combination trap system 4
Inner radius 10 mm

Remote control pop-up can be optionally

retrofitted, see page 92.29.

Single bowl artificial stone from cupboard width 60 cm

CARESSI CAGRPP50WHFL 2 SPL60120G 326
Colour white
1 bowl with 3½“ basket valve (integral) 6
and concealed overflow,
manually operable
Bowl depth 185 mm
1 combination trap system
Inner radius 10 mm

Remote control pop-up can be optionally

retrofitted, see page 92.29.

Single bowl artificial stone from cupboard width 60 cm

CARESSI CAGRPP50WHTU 1 SPL60122G 326
Colour white
1 bowl with 3½“ basket valve (integral)
3a / 3b
and concealed overflow,
manually operable
Bowl depth 185 mm
1 combination trap system 4
Inner radius 10 mm

Remote control pop-up can be optionally

retrofitted, see page 92.29.

CARESSI round excentre knob ZCC 65

Drill hole diameter 35 mm essential
Can be combined with all CARESSI sinks.

1/2022 92.29
1/2022