Scribd
Upload
91 views23 pages

Civil Nano Concrete

This document discusses nano concrete, which is concrete made with Portland cement particles less than 500nm. Nanotechnology can improve concrete's properties at the atomic scale, enabling thinner products, faster setting, and cost and environmental benefits. Key nano materials discussed are carbon nanotubes, nano-silica, and polycarboxylates. Nano concrete provides significant increases in compressive strength, reduces water and cement needs, and eliminates risks from micro silica. However, availability of nano materials and equipment to produce them remain challenges. Further development could enable "smart" and more economical concrete composites.

Uploaded by

Dark Devil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
91 views23 pages

Civil Nano Concrete

This document discusses nano concrete, which is concrete made with Portland cement particles less than 500nm. Nanotechnology can improve concrete's properties at the atomic scale, enabling thinner products, faster setting, and cost and environmental benefits. Key nano materials discussed are carbon nanotubes, nano-silica, and polycarboxylates. Nano concrete provides significant increases in compressive strength, reduces water and cement needs, and eliminates risks from micro silica. However, availability of nano materials and equipment to produce them remain challenges. Further development could enable "smart" and more economical concrete composites.

Uploaded by

Dark Devil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 23

Nano Concrete

By
Mergu.Pravalika
20N05A0149
Content
 INTRODUCTION
 WHAT IS NANO CONCRETE?
 WHY NANOTECHNOLOGY FOR CONCRETE ?
 NANO MATERIALS
 NANO SILICA
 ADVANTAGES OF NANO CONCRETE
 DISADVANTAGES OF NANO CONCRETE
 CONCLUSION
 SCOPE
INTRODUCTION
• Nanotechnology is one of the most active research areas
which has wide applications in almost all the fields.
• As concrete is most usable material in construction industry
it’s been required to improve its quality.
• Improving concrete properties by addition of nano particles
have shown significant improvement than conventional
concrete.
What is nano concrete?
 A concrete made with portland cement particles that are less
than 500nm as a cementing agent.
 Currently cement particle sizes range from a few nano-
meters to a maximum of about100 micro meters.
Why nanotechnology for concrete?
 Improves the materials’ bulk properties.
 Ability to control or manipulate materials at the atomic scale.
NANOSCALE ATTACK ON ASR (ALKALI SILICATE REACTION)
 To obtain thinner final products and faster setting time.
 Cost effectiveness.
 Lowered levels of environmental contamination.
NANO MATERIALS
 Carbon Nanotubes.
 Nano-silica.
 Polycarboxylates.
CARBON NANO TUBES
 Carbon nanotubes are molecular-scale tubes of graphitic carbon
with outstanding properties.
 They can be several millimetres in length and can have one “layer”
or wall (single walled nanotube) or more than one wall (multi
walled nanotube).
Single Walled Nano Tubes
MULTI WALLED CARBON NANO TUBES
PROPERTIES
 CNT are also highly flexible.
 Mechanically, CNT appear to be the strongest material.
 The smaller diameters.
 Stiffest and strongest fibers.
NANO SILICA
 Is the first nano product that replaced the micro silica.
 Advancement made by the study of concrete at nano scale
have proved nano silica much better than silica used in
conventional concrete.
NANO SILICA
PROPERTIES
 High compressive strengths concretes ( 15 MPa and 75 MPa at 1
day; 40 MPa and 90 MPa at 28 days and 48 MPa and 120 MPa at 120 days.)
 High workability with reduced water/cement ratio.
 Use of super plasticizing additives is unnecessary.
 Fills up all the micro pores and micro spaces.
 Cement saving upto 35-45%.
POLYCARBOXYLATES
 Polycarboxylates or polymer based concrete admixtures are High
Range Water Reducing admixture (HRWR).
 low dosage-reduce water as much as high dosage of conventional
admixtures.
 Higher dosage-produce Self Compacting Concrete (SCC).
 This admixture type is very suitable for underwater anti-washout
concrete.
POLYCARBOXYLATES
RESULTS
 Resistance to compression - 40 to 90MPa in 1 day.Resistance
to compression from 70 a 100 MPa (or more) in 28 days.
 Produces high resistance even with low addition (1 to 1.5 %
of the cements weight) and gives self compacting
characteristics with higher proportions (2.5 %).
 Meets the norms of environmental protection.

 70% less use of additives as traditional silica, super plasticizers or


traditional fibres.
ADVANTAGES OF NANO CONCRETE
 Cessation of contamination caused by micro silica solid particles.
 Lower cost per building site.
 Concrete with high initial and final compressive and tensile
strengths.
 Concrete with good workability.
 Cessation of super plasticizing utilization.
 Cessation of silicosis risk.
DISADVANTAGES OF NANO CONCRETE
 Availability of sources for producing Nano materials is less.
 For producing Nano materials there are no such equipment's
tograin the materials up to Nano size.
 Usage of Nano materials in concrete is difficult to replace
the materials in concrete like cement.
SCOPE
 If Portland cement can be formulated with nano-size cement
particles, it will open up a large number of opportunities.
 The cement will not only be more economical than organic
polymers but also will be fire resistant.
 A number of investigations have been carried out for
developing smart concrete using carbon fibers.
 This will become a reality with nano-cement because nano-
carbontubes are much more effective than carbon fibers. The
thickness of the composite can be reduced to microns and hence
flexible and smart cement composite can be manufactured.
CONCLUSION
 Well dispersed nano particles increase the viscosity of the
liquid phase, improves the segregation resistance and
workability of the system.
 Accelerates the hydration.
 Better bond between aggregates and cement paste.
 Improves the toughness,shear,tensile strength and flexural
strength of concrete.
Thanks

You might also like