Scribd
Upload
600 views2 pages

ISO 3834 Technical Review

The document is an ISO 3834 technical review for a welding project. It lists 20 items to be addressed in the review including parent material specifications, weld quality requirements, welding and inspection procedures, personnel qualifications, subcontracting, post-weld heat treatment, inspections, quality control, traceability, special welding methods, joint details, non-conformances, shop versus field welds, environmental conditions, pressure equipment design requirements, third party inspections, and equipment category. Responsible parties must sign off on the review.

Uploaded by

GvdB75
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
600 views2 pages

ISO 3834 Technical Review

The document is an ISO 3834 technical review for a welding project. It lists 20 items to be addressed in the review including parent material specifications, weld quality requirements, welding and inspection procedures, personnel qualifications, subcontracting, post-weld heat treatment, inspections, quality control, traceability, special welding methods, joint details, non-conformances, shop versus field welds, environmental conditions, pressure equipment design requirements, third party inspections, and equipment category. Responsible parties must sign off on the review.

Uploaded by

GvdB75
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ISO 3834 Technical Review

Project: Client:
Tender number: Date:
DESCRIPTION COMMENTS

1. Parent materials specification and


welded Joint properties

2. Quality and acceptance requirements for


welds

3. Location, accessibility and sequence of


welds, Including accessibility for
inspection and non-destructive testing

4. The specification of welding procedures,


non- destructive testing procedures and
heat treatment procedures

5. The approach to be used for the


qualification of welding procedures

6. The qualification of personnel

7. Sub-contracting

8. Post weld heat treatment

9. Inspection and testing

10. Quality-control arrangements, including


any involvement of an independent
inspection body
11. Selection, identified and/or traceability
(e.g., for materials, welds)

12. Other welding requirements, e.g., batch


testing of consumables, ferrite content of
weld metal, ageing, hydrogen content,
permanent backing, use of peening,
surface finish, weld profile

13. Use of special methods (e.g., to achieve


full penetration without backing when
welded from one side only)

14. Dimensions and details of joint


penetration and completed weld

15. Handling of non-conformances

16. Welds which are to be made in the


workshop, or elsewhere

17. Environmental conditions relevant to the


application of the process (e.g., very low
temperature ambient conditions or/ and
necessity to provide protection against
adverse weather conditions)

18. The design of pressurized equipment


must be Performed by a P.r Engineer

19. Third Party Inspections

20. Category of the pressurized equipment

DEPARTMENT RESPONSIBLE PERSON SIGNATURE


Commercial
Responsible welding co-ordinator

You might also like