Scribd
Upload
97 views

Crack Width Cal-T Beam-Euro Code

This document summarizes the calculations for a reinforced concrete tee section in compression. Key inputs include a factored moment of 114.2 kNm, concrete compressive strength of 35 MPa, and steel yield strength of 500 MPa. The calculations determine the cracking moment, cracked neutral axis depth, concrete and steel stresses, crack spacing, and crack width.

Uploaded by

Gautham Allimuthu
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
97 views

Crack Width Cal-T Beam-Euro Code

This document summarizes the calculations for a reinforced concrete tee section in compression. Key inputs include a factored moment of 114.2 kNm, concrete compressive strength of 35 MPa, and steel yield strength of 500 MPa. The calculations determine the cracking moment, cracked neutral axis depth, concrete and steel stresses, crack spacing, and crack width.

Uploaded by

Gautham Allimuthu
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Project 0

Client 0
Location Grid line 2
0

COMPRESSION

LEGEND

INPUT
fck = 35 MPa Area of tension steel,
fyk = 500 MPa
bw = 300 mm Area of compression steel,
h= 450 mm
bf = 2170 mm Maxmum tension bar spacing,
hf = 125 mm Max tension bar dia,
QP moment, M = 114.2 KNm Short term or long term ?
Age at cracking = 14 days Cover to A
Cement type = R (S, N, or R)
Creep factor, φ = 2.0
CALCULATIONS modulus of elasticity of concrete = 22[(fck+8)/10]0.3
moduli of elasticity of steel
Modular ratio
mean concrete strength at cracking
mean concrete tensile strength
uncracked neutral axis depth
[bwh²/2+(bf-bw)hf²/2+(αe-1)(Asd+As2d2)]/[bwh+(bf-bw)hf+(αe-1)(As+As2)]
uncracked 2nd moment of area
bwh³/12+bwh(h/2-x)²+(bf-bw)hf³/12+(bf-bw)hf(x-hf/2)²+(αe-1)[As(d-x)²+As2(x-d2)²]
cracking moment = fctI/(h-x)
< 114.2 kNm
fully cracked x (within flange)
concrete stress (x within flange)
stress in tension steel = σc∙αe(d-x)/x
effective tension area = min[2.5(h-d), (h-x)/3, h/2]b w - As
As /Ac,eff
max final crack spacing = min[1.3/(h-x),3.4c+0.17Ø/ρ p,eff)]
average strain for crack width calculation
CALCULATED CRACK WIDTH
0
Made by Date Page
0 00-Jan-00 33
TEE IN Checked Revision Job No
COMPRESSION 0 - 0

Area of tension steel, As = 1473 mm2


d= 399.5 mm
rea of compression steel, As2 = 236 mm2
d2 = 33 mm
xmum tension bar spacing, S = 87 mm
Max tension bar dia, Øeq = 25 mm
Short term or long term ? L (S or L)
Cover to As, c = 38 mm

Ecm = 34.1 GPa


Es = 200.0 GPa
αe = 17.61
fcm,t = 39.58 MPa
fct,eff = 2.95 MPa

xu = 138.21 mm

Iu = 6653 mm4 106


Mcr = 63.05 kNm
→ section is CRACKED
xc = 85.53 mm
σc = 3.234 MPa
σs = 209.0 MPa
Ac,eff = 34974 mm2
ρp,eff = 0.0421
sr,max = 230.1 mm
εsm-εcm = 800.8 μstrain
Wk = 0.184 mm
OPERATING INSTRUCTIONS

ENTER DATA IN BLUE CELLS ONLY.


RED MESSAGES INDICATE ENTRY ERRORS.

Table 3.1

Table 3.1 & equation (3.4)


Table 3.1

Below
x is within flange 0 Within
√
√ Below
7.3.2 (3) Within
7.3.4 (2)
Equations (7.11) & (7.14)
Equation (7.9)
Equation (7.8) 1
a b c
-150 263604.55 25099852 90.5519 bx^2/2 - bx^2 - x[(bf-bw)hf + (ae-1)As' + ae.As] + (bf-bw)hf^2/2 +
-1085 29854.548 10490477 85.5292 bf.x^2/2 - bf.x^2 - x[(ae-1)As' + ae.As] + (ae-1)As'd' + ae.As.d =
f z m
33.657 200.57774 5.9594776 3.75527
3.23423 M/[bfx(d-x/3)/2+(αe-1)As2(x-d2)/x(d-d2)]
f-bw)hf + (ae-1)As' + ae.As] + (bf-bw)hf^2/2 + (ae-1)As'd' + ae.As.d = 0
[(ae-1)As' + ae.As] + (ae-1)As'd' + ae.As.d = 0
)]

You might also like