100% found this document useful (1 vote)
131 viewsM-9900D Manual
Uploaded by
Puput PutraCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
100% found this document useful (1 vote)
131 viewsM-9900D Manual
Uploaded by
Puput PutraCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
/ 9
‘Analog Dual-mode high-power mobile radio, support to various services of public
network radio, with single call, group call, standby group, group automatic update,
PTT call application/preemption/PTT call rights, and so on; Edit frequency, func-
tion menu selection, notify the user through liquid crystal display and TTS voice
broadcast, the operation is simple and clear. CONTENTS
RADIO OVERVIEW
RADIO OVERVIEW.
INSTALL THE USIM CARD
INDICATOR DESCRIPTION
MENU TYPE.
BASIC DESCRIPTION
MAIN FUNCTION,
NATIVE INFORMATION.....
SYSTEM PARAMETERS
ANALOG SETTING.
CHANNEL SETTING.
GROUP SELECTION
MEMBER/FRIEND SELECTION
PUBLIC NETWORK SETTING,
‘TROUBLESHOOTING
BRIEF TECHNICAL INDICATORS.
10
"
2
@ Power/Volume key
Inthe off state, press and hold for 2 seconds to tum iton.
In normal standby mode, press and hold for 3 seconds to
power of.
In normal standby mode, tum left to decrease volume, tun to
right to increase volume
Indicator ight
@Microphonelwrite frequency interface
@ Select / Confirm key
+ In standby mode, short press to enter the system setting
menu.
+ In the system setting menu state, tum left and right to se-
lect setting options
Up button
@Down button
MENU key
In standby mode, short press to enter the system setting
menu.
OF key
+ In standby mode, press [F] key TTS to broadcast the cur-
rent signal strength.
+ Press and hold in standby mode to switch between SIM
‘card 1 and card 2
CALL key
Inthe standby mode, press to activate SOS function,
EXIT: Retum key
When entering the menu state, short press to return to the
previous menu or exit programming, @SIM card 1, card 2 insertion port
(® External speaker interface
®
@GPS antenna connector
@ 4G antenna connector
2
(@ Analog antenna connector
® Built.in speaker
@Fan
@Microphone side button PTT: public network button
In standby mode, press and hold the call (PTT).
@Microphone side button PTT2: analog bution
In standby mode, press and hold the call (PTT).
Microphone hole
Microphone keyboard
+ Press the [FUN] key to enter the menu.
+ Press the [CLR] key to ext processing,
+ Press the [M] key to dial
+ Press the [CLR] button to hang up or exit the call
+ Press the [A/B] key to switch the A/B channel group.
+ Press the [4] / [¥] key to switch the frequency or channel
‘number,
+ Press the 123466... bution to enter the frequency or chan-
‘nel number or phone number
+ Press * to enter 4 numbers, you can directly call the mem-
ber. When entering 4 or less numbers, press [FUN] to sin-
gle call the member,
INSTALL THE USIM CARD
Please prepare a valid USIM card (user identification card) be-
fore using this unt.
Open the card slot waterproof cover and insert the USIM card
Into the card holder, paying attention to the direction of the notch.
INDICATOR DESCRIPTION
Host Status | Indicatorstatus | Times
Looking for network | Green light. quick | 0.25 bright,
status flashing 0.28 off
: Green ight, Siow
Waiting state Taking | 18 bight, 18 of
‘Waiting state (when | Yeliow light, siow | 0.38 bright
there isa GPS signal) | __ flashing 078 off
tniating call Red light
‘Answer voice status | Green ight
MENU TYPE
1, Press [FUN] to enter the menu, There are 8 types.
2, Press the [A] [1] key o select the type;
3. Press the [FUN] key to confirm the menu type.
4, Press the [CLR] key or long press the menu key to exit pro-
cessing
BASIC DESCRIPTION
1. Power on: In the off state, long press [Poweri/Volume] key,
it will be turned on, during the boot process. There will be a
\oice prompt "Beep... Start... Search Network (Green Light
Flash)... Affer successfully logging in to the network (green
light flashes slowy), there will be volce prompts for the cur-
rent group and members.
2. Power off: In the power on state, long press [PowerlVol-
‘ume] key, untl the switch is turned off, it will shut down
3. Adjust the volume: Tur the [Power/Volume] key to the ap-
propriate volume when the power is on,
4, Select group (group call), single call selection (single
call), select friend os
+ Group selection: Select the group you want to enter by
rotating [Select/Confirm] key or [Up/Down] key on the
menu page. Press [Select/OK] to confirm entering the
‘group.
+ Single call selection: enter the group. display the mem-
ber lst, rotate the [Select/Confirm] key or [Up/Down] key
to select the member, short press [Select/Confirm] key to
3 confirm the selection:
+ Select a friend: Rotate [Select / Confirm] key or [Up/Down] key on the menu page to select a triend list, press [Select / Con-
firm] key to enter the friend lst, and display all the added friends, The operation is the same as the single call selection.
NATIVE INFORMATION
5. System setting oporation (00 menu list for specific options): Short press the [MENU] function key or keypad [FUN] to enter the ca SS es pa
system menu and operate the corresponding button according to the screen prompts, In this mode, if itis not operated for more than 1 ‘account info 1 Display the public network account information ofthis
18 seconds, it wll automaticaly exit the selection mode, or short press [EXIT] to exit or return to the default group mode standby. radio
6. GPS: After the platform is set, you can reboot and og in, only support GPS models. 2 Version info 7 Display software version information
3 Tocate info r Display longitude, latitude, speed
MAIN FUNCTION 4 Embed info 7 Display embedded information
5 _|_ Programming Time 7 [Display final programming time
+ AGILTE POC +dual band analog radio 6 Retuin 7 1
+ Analog output power 25
+ Double PTT,
+ SOS & APRS function;
+ GPS Function;
+ Repeater function
+ Group Call, Private Call, Friends Call, Emergency Call
+ Dual SIM Card slots
+ Network Signal Strength Prompt
SYSTEM PARAMETERS
Num [Display character | Secondary menu display characters ‘Secondary menu setting instructions
of [The backlight is turned off (the backlight will be Ii
when there is an operation)
1 backiight on [The backlight is always on
Automatic § seconds /
[The backlight is off after the set time (the number ind
cates the time)
Byhand
[Manual lock keyboard
‘Automatic § seconds /
Lock the keyboard after setting the time, do not save|
2 Ley lock mode the lock state
aw Svcd! Lock he Keyboard ater sting he tine, save the ck
3 Power on tone (Off prompt tone — 1.5 [Boot tone selection Num] Display character | Secondary menu display characters ‘Secondary menu setting instructions ANALOG SETTING
Off Close waiting
Pubic network only [Open only the publi network Num [Display character Secondary menu dieplay charactors | Secondary menu setting instructions
4 wat con Pubic network +A and B Public network and AB group channels open 1 Step 2.5KHZ../S00K choose fom 2.5kHz,.500KHe
'o Public network +A or B Public network and A or B group channels open i
