Scribd
Upload
85 views

XR400 July 2011

The document summarizes the specifications of the Terex Pegson XR400 track mounted primary jaw crushing plant. The plant features a Terex Pegson "M" series single toggle jaw crusher capable of throughput up to 400 tph. It is recommended for applications with uncrushable material in the feed up to 200mm cube. The plant has a vibrating feeder, preliminary screenbox, product conveyor, and is powered by a Caterpillar C9 Tier III Acert diesel engine. Optional equipment includes a magnetic separator, belt weigher, and hydraulic pick breaker.

Uploaded by

Andres Astudillo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
85 views

XR400 July 2011

The document summarizes the specifications of the Terex Pegson XR400 track mounted primary jaw crushing plant. The plant features a Terex Pegson "M" series single toggle jaw crusher capable of throughput up to 400 tph. It is recommended for applications with uncrushable material in the feed up to 200mm cube. The plant has a vibrating feeder, preliminary screenbox, product conveyor, and is powered by a Caterpillar C9 Tier III Acert diesel engine. Optional equipment includes a magnetic separator, belt weigher, and hydraulic pick breaker.

Uploaded by

Andres Astudillo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

RTM Equipment

Terex Pegson XR400

Track mounted fully mobile primary jaw crushing


plant
The XR400 incorporates the remarkable The XR400 is recommended for applications
performance of the TEREX Pegson where there is a risk of steel or other
1100x650 Premiertrak hydraulic adjust uncrushable material in the feed up to 200
jaw crusher. This will give exceptional mm cube. The crusher will self protect and
levels of throughput, reduction and open in the event of this creating a crusher
reability. overload.
Features: Options:

• Terex Pegson "M" series single • Extended one piece hydraulic folding
toggle jaw. hopper.
• High throughput capacities up to • Fixed 15 mm thick Hardox feed
400 tph. hopper liners can be supplied fitted to
• Aggressive crushing action with the internal rear and side of the feed
high swing jaw. hopper (available on the standard
• Hydraulic crusher overload system feed hopper only).
ideal for applications with • Wire mesh for underscreen.
uncrushable material in feed up to • Multi tooth jaw plates in lieu of super
200mm cube in feed. tooth profile.
• Hydraulic unblocking facility. • Premium jaw plates in lieu of super
• Very low fuel consumption, tooth profile.
typically only 22 litres/hour • Deflector plate under crusher.
depending on application, due to • Hydraulically folding 600 mm wide
highly efficient hydraulic fluid side/dirt stockpile conveyor with a

www.rtmequipment.com

PDF created with pdfFactory trial version www.pdffactory.com


RTM Equipment

operated direct drive system. discharge height of 2300 mm.


• Low running cost due to direct • Overband magnetic separator with
crusher drive and efficient plant permanent magnet suspended over
control. the main on plant product conveyor
• Quick set up time. and complete with hydraulic drive.
• Maximum mobility with heavy • Single idler belt weigher with
duty, low ground pressure crawler integrator and speed sensing wheel
track. fitted to the main product conveyor.
• 1100×650 mm feed opening. • Hydraulic driven water pump
• Hydraulic CSS adjustment from 50 assembly to provide a pressurized
to 125 mm. water supply to the dust suppression
• Hydraulic folding feed hopper with system.
wedge fixing system. • Plant mounted hydraulic pick breaker
• Feed hopper capacity 10.0 m³. fitted to the side of the chassis.
• 4080×1060 mm vibrating feeder. • Electric re-fuelling pump kit.
• 2-deck preliminary screenbox. Top • Radio remote control.
deck - 2120×1060 mm Grizzly, • Engine fire extinguisher system.
bottom deck - rubble blanking mat • Plant lighting mast.
or various aperture wire mesh
(available as optional extra).
• A two-way dirt chute is provided to
discharge to the product conveyor
or the optional dirt conveyor when
fitted.
• Caterpillar C9 Tier III Acert diesel
engine developing 172kW (230 hp)
@ 1800 rpm.
• 1000 mm wide plain troughed
product conveyor with a discharge
height of 3905 mm.
• Product conveyor can be
hydraulically raised and lowered for
transport and maintenance
purposes.
• Excellent under crusher access for
removal of wire with hydraulic
tilting conveyor system
• A hard wired umbilical control unit
for the track motion, feeder
stop/start and a stop button for the
plant.
• Dust suppression sprays fitted as
standard.
• Operator walkways and access
ladder.

www.rtmequipment.com

PDF created with pdfFactory trial version www.pdffactory.com


RTM Equipment

Dimensions & Weight:


Operational width, mm 2800
Operational width with dirt conveyor, mm 4290
Operational length, mm 14960
Operational height, mm 4135
Transport width, mm 2790
Transport length, mm 15365
Transport height, mm 3150
Total weight of the basic plant, kg 43000
Total weight with dirt conveyor & magnet, kg 45000
All given data is for information only and is subject to change without notice.

www.rtmequipment.com

PDF created with pdfFactory trial version www.pdffactory.com

You might also like