THE SMALL TOOL SPECIALISTS

NEW!
Model Airways
Fokker Eindecker
Wood Aircraft
Model Kit
See page 2

Shop Online:
www.micromark.com
Order Toll Free: 1-800-225-1066
Early Spring 2022 • Prices in this catalog valid April 1, 2022, through June 10, 2022.
 See more Model Airways kits on page 89 See additional details and accessories
on pages 30 – 33

Painted and
finished model
shown.

Model Airways Fokker Eindecker E-IV

Wooden Model Aircraft Kit, 1/16 Scale MicroLux® 7 x 16 HOTROD Lathe Super Value Package
Model Airways Kits Museum-quality kits include laser-cut wood, fine cast Britannia We start with our ever-popular, high-precision, heavy-duty MicroLux® 7 x 16 Mini Lathe, then
metal parts and are historically accurate with exceptional detail and step-by-step plans. “HOTROD” it with our most-asked-for selection of premium upgrades. The end result is a true
The planes are open airframe to show the structural detail. Made in America. high-performance machine that looks as good as it works! Package includes:
The Fokker Eindecker fighters were a series of German World War I monoplane single-seat MicroLux® 7 x16 Lathe with 3-jaw self-centering chuck including inside/outside jaws and
fighter aircraft designed by Dutch engineer Anthony Fokker. Developed in April 1915, the wrench, compound slide with 5/8” capacity four-position tool post and chip deflector,
first Eindecker (“Monoplane”) was the first purpose-built German fighter aircraft and the MT2 dead center for tailstock, carriage power feed with change-gear set for threading,
first aircraft to be fitted with a synchronization gear, enabling the pilot to fire a machine thread position indicator, splash guard, chip tray, tool set and instruction manual.
gun through the arc of the propeller without striking the blades. The Eindecker gave the Handwheel & Lever Kit Chrome-plated levers and anodized aluminum handwheels add
German Army’s Air Service (then the Fliegertruppen des deutschen Kaiserreiches) a gleaming shine and a blast of color. Plus, they feel as good as they look!
degree of air superiority from July 1915 until early 1916. #86681 Metal Gear Kit replaces stock plastic gears with strong, dependable metal parts.
This impressive model kit is 20” long, 7-1/4” high, and features a 25” wingspan. Never worry about broken gears again. Includes 80-tooth gears for power feed.
#90334 Model Airways Fokker Eindecker E-IV Wooden Model Aircraft Kit, 1/16 Scale #88175 MicroLux® 7 x 16 Hotrod Lathe Super Value Package
List Price $299.99 . . . Our Price $249.95 Value $2,069.75 . . . Super Buy $1,799.95*

#90248 TinyArcade DIY Kit by TinyCircuits It’s all in the name: an arcade so itty-bitty it
Functional Micro-Size TV, fits in the palm of your hand. The TinyArcade by TinyCircuits puts the “fun” in “functional,”
giving you a miniature that doesn’t just imitate a life-sized machine but performs like one
Arcade Game, Pocket-Size Video too. Enjoy classic video games on this fully-functioning mini arcade wherever and
Game, and Other DIY Electronic whenever you want. Whether you are looking to recreate your childhood memories or
make new ones, the TinyArcade is quick and easy to build and simple to use. $59.95
Kits are Big Fun on
a Miniature Scale! #90250 Tiny Pocket Arcade DIY Kit by TinyCircuits The Pocket Arcade is a handheld
mini arcade that offers hours of non-stop game play. Now you can enjoy classic video
games wherever and whenever you want. Recreate your childhood memories or make
new ones, the Pocket Arcade is easy to use and can be built within minutes of opening
the box. The Pocket Arcade comes loaded with three games and a whole slew of throw-
backs that can be downloaded for free. If you’re looking to exercise your programming
skills, you can learn how to develop your own games to play on the Pocket Arcade and
share in the TinyCircuits community under our forum. $59.95
NOTE: Watching videos, movies and more on the two Tiny Arcades above is simple! Just use the
TSVconverter – a free tool to convert any MP4 file – and load the files on to a micro SD card to
enjoy hours of entertainment!
#90251 TinySaber DIY Kit by TinyCircuits features sixteen vibrant SK6812mini RGB LEDs,
capacitive touch sensors, an accelerometer and a micro-USB port for battery charging and
#90247 TinyTV® DIY Kit by TinyCircuits Want to watch a little TV? The TinyTV® DIY Kit device programming. You can use the touch sensors to turn the device on and off, change
assembles easily in less than 5 minutes with no soldering or special tools required. Load color patterns, and even display Persistence-Of-Vision (POV) text! A double-tap can
up to 5 hours of your own videos, movies, and TV shows easily using our TSVconverter – change the base color of the TinySaber to red, green, or blue. The ATtiny841 is reprogram-
a free tool to convert any MP4 file. Then load the files onto the included micro SD card, sit mable, allowing you to customize your TinySaber experience with some basic coding
back, relax, and enjoy hours of entertainment! Note: TinyTV® does NOT receive over-the-air knowledge. You can display your own POV text or make custom color patterns. $24.95
television content, nor can it livestream, it can only play video content from the micro SD card. #90249 Tiny Piano DIY Kit $9.95 #90252 Tiny Violin DIY Kit $9.95
The TinyTV® DIY Kit is 3D printed, has 4 push buttons, and an ON/OFF switch. It also includes Compose tiny tunes with the TinyPiano and Tiny Violin! Built around the ATtiny841 micro-
the Tiny Remote, so you can easily change channels, power on or off, and adjust the controller, these fun mini “instruments” feature 9 capacitive touch sensors, 10 pre-loaded
volume. The TinyTV® is provided in white, but is highly customizable with acrylic paint or Nokia style ringtones, magnetic buzzer, and simple coin cell power. The 7 keys on the
even metallic sharpies. $74.95 piano and 4 strings of the violin are capacitive touch sensors that play different pitches.

2 • ORDER TOLL FREE 1-800-225-1066 *Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance. See our website for video
 Follow us on SUPPLIES HAND TOOLS POWER TOOLS
FormBox Large-Format Vacuum Forming Machine
Seeing Those Big Ideas Come To Life Never Seemed So Simple Forget Everything You’ve Ever Known about Cutting…
the More Powerful Wondercutter S is Here!
See videos
on YouTube

Micro-Mark
has exclusive rights to
distribute Wondercutter
in North America. Companies
The Mayku FormBox is a desktop vacuum former that brings your ideas to life. It works interested in reselling Wondercutter,
with any vacuum cleaner and a whole selection of different materials. Use it to make please contact us for details. Note: faceplate color may vary.
molds in minutes with no additional software or digital model manipulation needed.
As a perfect partner for your 3D printer, the Mayku FormBox offers you total power over Wondercutter uses the amazing power of ultrasonic technology to revolutionize cutting
the design and pace of production. Print one, mold 20 and start your production line from this moment forward. Producing a mind-boggling 40,000 vibrations PER SECOND,
from home. Experiment with materials to find the perfect design. It’s your creation. Wondercutter breezes through an amazing array of materials with such ease you simply
Features at a glance Universal vacuum adapter Connect the Mayku FormBox using will not believe your eyes…in fact, the oscillations are so rapid, you literally can’t see
the provided adapter that fits any standard vacuum cleaner. Auto on/off When the trays or feel it move! This innovative tool will not only replace practically every other knife in
are pulled down, an automatic trigger will turn on the suction of your connected vacuum your shop, it will expand your capabilities, enhance your creativity and allow you to
cleaner. Timer A timer is activated after the plastic has been inserted and the tempera- execute the most intricate cuts even in the most difficult materials with a level of
ture set. The built-in speakers will alert you when the plastic is ready to be formed. precision, ease and accuracy that was never possible before. Model makers, prototype
Heat control A 200W ceramic heater with a range of 160C to 340C, and a dial to precisely builders, industrial designers, crafters, leather workers, florists and DIYers of all kinds will
set the correct temperature for your plastic to form. find this ingenious, ground-breaking tool essential for cutting plastic, cardboard, balsa,
Specifications Height: 12.4” / 315 mm • Length (with handles): 18.3” / 466 mm fabrics, plywood, rubber, acrylic, MDF, leather, bonsai and more! Ergonomic handpiece
• Width: 10.7” / 274 mm • Forming bed: 7.8” x 7.8” / 200 mm x 200 mm is comfortable and easy to hold, even for people with hand problems. Best of all, the tool
• Draw Depth: 5.1” / 130 mm • Weight: 28.66 lbs. / 13 kg. does all the work for you! Set includes base workstation with built-in lithium-ion battery
#88422 FormBox Vacuum Forming Machine Super Buy $699.00 pack, handpiece, charger cable, 40 extra blades and user’s manual.
#88195 Wondercutter S $399.95
NEW! Use Genuine Mayku Materials for Best Results with Your FormBox Machine
#90121 Mayku Clear Sheets, 0.5 mm, 30 Pieces. Transparent and food-safe PETG (poly- #88475 Blades for Wondercutter, package of 40 $6.95
ethylene terephthalate) sheets for making reusable molds. The slight flex and non-stick
surface ensures that your templates and casts can be removed with ease. $39.99 Compact All-In-One Vacuum Forming Machine
#90123 Mayku Clear Sheets, 1 mm, 20 Pieces. $49.99 For making small, highly-detailed vacuum formed components,
#90122 Mayku Form Sheets, 0.5 mm, 30 Pieces. Versatile, easy-to-use white sheets. Great this desktop machine can’t be beat. The all-in-one
for product packaging, prototyping and enhancing decorative craft projects. $39.99 design includes an overhead heater for softening the
plastic sheet, a clever lever-operated transport
#90124 Mayku Resin Sheets, 1.5 mm, 20 Pieces. Translucent, milky-colored sheets made
frame that lowers the plastic sheet over the pattern,
of low-density polyethylene. Designed specifically for making custom molds for casting
and a base unit containing an extra-strong vacuum
resin. These sheets can also be used for prototyping, model-making and more. $39.99
chamber to draw the plastic tightly over the
#90125 Mayku Formbox Heat Shield. Allows the FormBox to work with thicker sheets pattern. Use it to make aircraft canopies, tire
by improving the distribution of heat across the material. An essential accessory for using molds, rock and retaining wall molds, hopper car
#90124 Mayku Resin Sheets (above) as well as other professional materials. $39.99 loads, coal piles, wall and roof panels and so much
more. Industrial-quality machine is capable of
#80868 Do It Yourself Vacuum Forming is an illustrated guide to small- making thousands of moldings. Works with clear,
scale vacuum forming you can do at home without special skills and little white, black, tinted or opaque plastic sheets up to
equipment. By Douglas E. Walsh. 129 pages. $15.95 .040” thick. (Note: Not for use with polycarbonate.)
Sheet size: 5” square. Maximum pattern length: 5”
when placed diagonally in the 4” square chamber.
Includes steel beads that support patterns with
Item # Size Thick Material Pcs./Pkg. Price/Pkg. Multipurpose irregular bottom surfaces. Overall dimensions:
85881 8.5” x 11” .010” Clear Vivak 6 $18.95 Plastic Sheets 8” wide x 10” deep x 12” high. Weight: 10-1/4 lbs.
85882 8.5” x 11” .015” Clear Vivak 6 $20.95
Use for fabricating 4’ long cord plugs into standard household outlet.
85883 8.5” x 11” .030” Clear Vivak 6 model structures,
$20.95 #85756 Compact Vacuum Forming Machine
81335 11” x 14” .020” White Styrene 6 airplane cowls, car
$23.95 List $224.95 . . . Our Price $124.95
bodies, dollhouse
80902 11” x 14” .030” White Styrene 3 $23.95
and miniature
80903 11” x 14” .060” White Styrene 3 $29.95
furniture ”glass,” #81477 Nibbling Cutter Squeezing the handle of our uniquely designed
windshields and nibbling cutter actuates an ultra-sharp punch and die set which quickly
83478 11” x 14” .030” Black Styrene 3 $23.95
other window and cleanly “nibbles” its way (3/32” at a time) through soft metal and
83479 11” x 14” .060” Black Styrene 3 $23.95 plastic sheet up to 1/16” thick.
glazing. Easily
81336 11” x 14” .020” Clear Vivak 6 $35.95
glued, they can Use it to cut out window and
80905 11” x 14” .030” Clear Polycarbonate 2 also be vacuum
$21.95 door openings, make sheet
formed to create metal templates and gauges,
80906 11” x 14” .060” Clear Polycarbonate 2 $27.95 etc. Specially contoured handle
specialized shapes.
provides a comfortable grip.
STYRENE Multipurpose high-strength opaque plastic. Great for structure walls and roofs.
Cutter width is 1/4”; overall
VIVAK Multipurpose high-strength clear plastic. Use for airplane canopies and other glazing. length is approx. 8”. $14.95
POLYCARBONATE An unbreakable, high-temperature plastic.

See our website for a video of this item in use 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 3
 NEW ITEMS HAND TOOLS SUPPLIES MODEL TRAINS
#90440 Shaviv Premium Duburring and Filing Kit Shaviv is the answer to #90441 Shaviv Tool & Die Maker Kit with Leather
unwanted burrs on a wide variety of materials such as metal, plastics, wood Pouch This premium set contains UF1 Flat Dia-
and more. Wherever the burr, Shaviv has the tool in its extensive range to mond Coated File, US1 Triangular Scraper, US3
solve your problem. This is a great set for precision work on holes, slots, Round Scraper, US4 Hooked Corner Scraper,
and edges featuring a variety of different diamond UB38 Miniature Rotational Deburring Tool for
coated files. Perfect for Straight Edge, Hole Edge, min. hole diameter 0.08” (2 mm) in leather case.
Hole Back Edge, Hole Inner Surface, and Flat Made in Israel. List $126.57 . . . Our Price $99.95
Surface applications. This set includes one
each MB2020E Handle, E100S Blade,
E400 Blade and 5 styles of diamond
coated files. Made in Israel.
List $194.66 . . . Our Price $159.95

#90271 OcCre® Workshop Cabinet Kit

This all-in-one workstation/organizer is an
essential element for any modeler in the
Now in See-Through Clear, these process of assembling and
Amazing “Easy Cutting Guides” are Ideal for Masking Projects fitting out a model kit. It allows
you to keep your tools and model
in a neat and compact space, with
the added convenience of being
able to move your whole project
from one area to another quickly
and securely. In this DIY kit, you
will find pre-cut pieces ready for
the fast and easy assembly of your
workshop cabinet. Included are
compartmentalized plastic drawers
for organizing and storing parts
and accessories. The cabinet is
Working directly with the exceptional engineering team at Infini Models, we’ve developed suitable for all types of modeling,
these See-Through Clear Precision Cutting Guides because we need them, too! Place them from ships to railway to aircraft and more.
over scale drawings, photos, etc. to determine the exact line spacing, curve, pattern, etc. The MDF wooden parts are unfinished. Model, tools and
you need for your masking project. Perfect for modelers and crafters, you just won’t Assembly required. $69.95 supplies not included.
believe how smooth, clean and sharp the cuts you make can be using an ordinary hobby
knife and a fresh blade. Delicate laser-etched grooves in the acrylic surface are almost too
Start Stamping the
fine to feel with your finger, yet provide surgically accurate cuts with almost zero effort. Fast, Easy Way
Take it from us, you need these! See our website for details. $19.95 each with ImpressArt
#90488 TYPE A, CLEAR #90489 TYPE B, CLEAR #90490 Infini TYPE C, CLEAR #90491 Infini TYPE D, CLEAR
Tools and
Standard Easy Cutting Guides, Orange with Black Markings $19.95 ea. Supplies
#88073 Infini TYPE A #88074 Infini TYPE B #88075 Infini TYPE C #88076 Infini TYPE D

#90326 ImpressArt Essential Hand Stamping Kit These user-friendly tools, stamps, and
Models, track and
roadbed not included. accessories are for makers of all aptitudes. Set includes Ergo-Angle™ Hammer - Produces
deep, crisp impressions; Large Steel Block - Provides solid work surface for stamping;
Stamp Tape - Safely secures blanks to steel block without leaving any residue; Stamp
Premium Display Cases by Scientific Enamel Marker - Darkens stamped impressions; Stamp Guide Book - Contains 72 sticker
Scale modeling is a marvel of miniature engineering that is often taken for granted; guides to help evenly space-out letters and align stamped impressions in a straight line,
seen but not fully appreciated for its remarkable detail and precision. Whether it’s the on a curve, or in a pattern; Bridgette™ Signature Letter Stamps, Uppercase, 3 mm - Forged
magnificence of a shinning locomotive or a sleek diecast roadster, showcasing these from hardened steel and rated to endure stamping on soft and hard metals up to Stainless
collectibles is often an afterthought. Steel*. Includes full uppercase alphabet and 7 bonus design stamps; Large Practice Blank;
Scientific offers a perfect solution for highlighting that artistry with these high-quality, 4 Key Chain Projects; Gift/Storage Box; Instructions. $100.00
hand-crafted, American-made display cases. Now your favorite miniatures can become *Rated for stamping on Alkemé, aluminum, pewter, copper, brass, silver, gold, Stainless Steel 304-308, and other metals up
decorative focal points on your bookshelf, desk or coffee table. to 66HRC Rockwell Hardness.
The crystal-clear acrylic top lifts from the handsome finely grained matte black ABS base, #90332 ImpressArt Metal Stamp Enamel Marker, Black $9.95
allowing you to switch-out models if you choose. Affix roadbed and a section of track to #90327 ImpressArt Guitar Pick Gift Set includes three 16 gauge, 1” x 1-1/4” aluminum
the base to display a locomotive or rolling stock. Though essentially clear as glass, our guitar pick stamping blanks and one guitar pick holder. $10.00
artisan-formed acrylic tops are lightweight and non-yellowing with durable end joints #90328 ImpressArt Bookmark Metal Stamping Blanks Kit includes three 14 gauge,
that will not pop off. Each case is quality inspected and securely packed for safe transport. 6” x 1/2” aluminum stampable bookmarks and three ribbons. $10.00
#89888 Scientific 9” Premium Display Case. Base: 10-1/4” long x 4-1/4” wide x 3/4” thick. #90329 ImpressArt Dog/Pet Tag Engraving and Metal Stamping Blanks includes four 16
Interior: 9-1/16” long x 2-13/16” wide x 2-1/8” high. 4” high overall. $69.95 gauge, 1-5/8” x 7/8” aluminum stampable and engraveable tags, plus four split rings. $10.00
#89889 Scientific 18” Premium Display Case. Base: 19-1/4” long x 4-1/4” wide x 3/4” 90331 ImpressArt Wine Charm Metal Stamping Blanks Kit includes six 16 gauge
thick. Interior: 18” long x 2-3/4” wide x 3-1/4”. $89.95 aluminum stampable wine charms (3/4” to 1-1/2”) and six wine charm rings. $10.00

4 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 MODEL KITS SUPPLIES
Gerstner Tool Chests…the Tradition of Excellence Continues
When you purchase a Gerstner Chest, you make an investment. You invest in the valuable precision tools, prized collections, and other precious treasures you keep inside it. You also
invest in the finest materials and craftsmanship, so you can enjoy a lifetime of dependable use from something worth passing down through the generations. A Gerstner is built with
carefully selected hardwoods and veneers that provide a moisture-free environment for ultimate organization and protection of your items. Each Gerstner Chest features tongue and
groove joinery, polished chrome hardware, security locking system, and green felt interior lining. NOTE: All items ship direct from Ohio to contiguous 48 states only.

#89940 Gerstner 5-Drawer Oak Top Chest

Overall size: 20” wide x 14-5/8” tall x 10” deep; Drawers:
three 17-7/8” wide x 1” tall x 6-5/8” deep, two 17-7/8”
wide x 2-1/4” tall x 6-5/8” deep. Super Buy $329.00

#89940 Gerstner 4-Drawer Red Oak Mini Chest

Overall size: 11-7/8” wide x 8-1/8” tall x 5-3/4” deep;
Drawers: 9-3/4” wide x 1-1/4” tall x 3-7/8” deep.
Super Buy $179.00
#89762 Gerstner 2-Drawer Oak Mid-Base
Overall size: 21-1/2” wide x 7-3/8” tall x 11-1/4” deep; Top
#89758 Gerstner 11-Drawer Red Oak Top Chest Overall shelf: 20-1/2” wide x 10-7/8” deep; Drawers: one 19-1/4”
size: 24” wide x 15-7/8” tall x 10” deep; Top compartment: wide x 1-1/4” tall x 8” deep, one 19-1/4” wide x 2-5/8” tall
22-7/8” wide x 3-1/4” tall x 8-7/8” deep; Drawers: six 7-1/2” x 8” deep. Super Buy $269.00
wide x 7/8” tall x 6-5/8” deep, two 3-5/8” wide x 1-5/8” tall
x 6-5/8” deep, two 21-7/8” wide x 7/8” tall x 6-5/8” deep, one
21-7/8” wide x 1-5/8” tall x 6-5/8” deep. Super Buy $489.00 #89942 Gerstner 11-Drawer Red Oak Tool Chest
Overall size: 21-1/2” wide x 24-1/2” tall x 11” deep; Top
compartment: 20-1/4” wide x 3-1/4” tall x 9-3/4” deep;
Drawers: six 9” wide x 1-1/8” tall x 9-1/8” deep, three
19-1/2” wide x 1-1/2” tall x 9-1/8” deep, two 19-1/2” wide
x 3” tall x 9-1/8” deep. Super Buy $709.00

#89760 Gerstner 5-Drawer Red Oak Roller Bottom Cabinet

with Side Table Overall size: 27-3/4” wide x 33-3/4” tall x 17”
deep; Drawers: two 22-3/8” wide x 3-3/8” tall x 12-5/8” deep, one
22-3/8” wide x 5-1/4” tall x 12-5/8” deep, two 9-7/8” wide x 9-1/2”
tall x 12-5/8” deep; Side table: 10-3/8” wide x 16” deep.
Super Buy $1389.00
#89941 Gerstner 6-Drawer Red Oak Mini Chest
Overall size: 12-1/4” wide x 14” tall x 8” deep; Top See our website for
compartment: 11-1/4” wide x 2” tall x 7” deep; Drawers: additional items and complete #89763 Gerstner 5-Drawer Oak Roller Bottom
four 10-1/4” wide x 1” tall x 6-1/8” deep, two 10-1/4” wide details on each Gerstner Chest. Cabinet with Side Table Overall size: 23-5/8” wide x
x 2” tall x 6-1/8” deep. Super Buy $339.00 33-3/4” tall x 17” deep; Drawers: two 18-3/8” wide x 3-3/8”
Wooden City® NEW Augustree Wooden tall x 12-5/8” deep, one 18-3/8” wide x 5-1/4” tall x
Fascinating laser-cut wood model kits require no glue or tools to build! 12-5/8” deep, two 7-7/8” wide x 9-1/2” tall x 12-5/8” deep;
Kinetic Models Everything you need, including highly detailed instructions, is right in the box!
Model Kits – No Glue Needed! Side table: 10-3/8” wide x 16” deep. Super Buy $1299.00

#88909
Ferris Wheel
#89717 Kinetic Safe
Rotates by rubber
Mechanism replicates a
band power
working bank safe with
when you turn
a digital/mechanical
the special key.
lock and 3-number Phone not included.
8.7” x 10.2”
code combination.
x 12.7”;
$59.95
429 pieces.
$119.95
#90474 Retro Pinhole Camera Wooden Model Kit
#89721 High-end hardwood 3D puzzle that serves as a working
London Bus retro film camera for use with 35 mm film. Finish as UV
Runs on rubber coated. Assembly required. 6” x 2.7” x 3.5”. $72.95
band power!
216 pieces. #90473 Retro Clock Wooden Model Kit
$60.95 Reminiscent of the tube radios of the 1950s and 60s, this
kit is a hardwood 3D puzzle that you assemble yourself
and can use as an acoustic (non-powered) amplifier for
your smartphone’s speaker! Requires no glue. Measures
7” x 3” x 3.5” when assembled. $44.95

#90475
#89209 Wooden Express Retro Classic Clock
Locomotive & Tender with Rails Starts with a special key. Wooden Model Kit
Wheels turn; moves forward and back. 384 pieces. $119.95 This wooden retro
#88907 #88908 4x4 Vehicle classic clock model
Royal Clock Runs on rubber kit is a hardwood
#90476 Turntable Clock Wooden Model Kit
Wound with an band power! 3D puzzle that you
This wooden turntable clock model kit is a hardwood 3D
adjustable plummet Steerable assemble yourself
puzzle that you assemble yourself without glue. Measures
to ensure accuracy. wheels. 11” x without glue.
8.5” x 2.5” x 6.9” when assembled. $44.95
Pendulum includes a hidden 5.9” x 5.8”; Measures 3.9” x 2.4” x
niche for coins. 126 pieces. 569 pieces. See more wooden model kits in this 5.6” when assembled.
$62.95 $97.95 catalog and at www.micromark.com $44.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 5
 NEW ITEMS POWER TOOLS HAND TOOLS SUPPLIES
Custom Brush Sets Offer Great Versatility for Makers
The Ultimate Mini Paint Mixer,
Only from Micro-Mark
Sourced from the scientific world and re-purposed
for makers, our powerful Mini Vortexer offers
immediate orbital vortex shaking at an astounding
4500 rpm for a wide variety of paint bottle sizes. Just
hold your paint bottle or can to the rubber pad to
start operation. Never before has paint mixing
been so thorough, quick and easy. One hand
is all it takes! Mini Vortexer has the motor
power and orbit circle of larger units,
operates at nearly double the speed of
competitive models, and still costs
Custom-made for Micro-Mark, these high-quality paint brush sets brings together the
less. Includes 100 – 240VAC
most versatile and desirable sizes for the widest range of paints and applications. Premium
Vortexer unit, 12VDC power
nylon bristles hold paints, inks, dyes, etc. very well and keep their shape when treated
supply with interchangeable
with basic care. Handles are nicely formed and feel great in the hand. $9.95/set
plugs for standard US, UK, EU and
Austrialian household outlets, two #90237 Micro-Mark 7-piece Flat Brush Set #90238 Micro-Mark 7-Piece Round Brush
rubber base pads, and instructions. includes 7 brushes in the following sizes: Set includes 7 brushes in the following
Backed by a 5-year manufacturer’s warranty! P00, P01, P02, F01, F03, F05, F08. sizes: P01, P02, P03, P04, P05, P06, P07.
#90495 Mini Vortex Mixer $119.95
Keep Your Workspace Neat and Organized While
Keeping Your Paint Brushes Clean and Ready-to-Use
NEW Paint Sets and Diorama Products by Vallejo Its clever, all-in-one,
compact design
takes up only 7-1/2”
x 4” x 3” of space, yet
holds up to 14 paint
brushes, 8 ounces
of water/cleaning
solution, and includes
a separate palette
with lid, sponge and
10 sheets of 6” x 2”
#90266 Model Air Italian WWII Regio disposable palette
Esercito Camo Colors AFV Color Series paper – ideal for
8-color paint set. 17 ml each. $19.95 mixing new colors
and then keeping
them moist as you
work. The cleaning
tank is divided into two equal 4-ounce containers for clean water and dirty water. A variety
#90264 Created in collaboration with of ridges and combs molded into the tank are provided to gently remove paint from bristles
Alpine miniatures, a brand known interna- without causing damage to brushes. The palette stores inside the top of the tank, covering
tionally for the quality and detail of their the water/solution inside and preventing evaporation.
WWII historical figures, this 8-color paint #90222 Paint Brush Cleaning Station $14.95
set also contains an exclusive 1/35 scale
#90223 Palette Paper Refills. Eighty 6” x 2” disposable sheets for color mixing. $6.95
figure sculpted by Taesung Harmms, and #90265 Model Air French Camo Colors
a detailed painting guide by Jaume Ortiz. Pre-War & WWII AFV Color Series 8-color
$34.95 paint set. 17 ml each. $19.95
More Innovative Painting Solutions from Infini Models

The Ultimate Guide for Painting

and Weathering with Vallejo Acrylics
This exceptional how-to book examines 10 years of work by the
great modeler José Brito; throughout the 552 pages, the author
shows his techniques and tricks to construct and paint models,
almost always in the setting of a diorama. Written as much for
novices as for experienced modelers, the book discusses the tools,
materials and colors used by José Brito, followed by step-by-step
descriptions of the models shown. Subjects include buildings of
different periods, sea and beaches, wooded areas and deserts,
realistic settings, sci-fi scenes, figures, military vehicles, and more.
#89749 Master Scale Modelling, by José Brito $59.95

#89903 Vallejo Scenics

Garbage Cans, 1/35 scale. #89904 Vallejo Scenics
#89902 Set of 3, unpainted. Stumps with Roots, 1/35
Vallejo Scenics Country $12.95 scale. Unpainted. $10.95
Road with Railway, 1/35 Scale #85842
With its high-quality detail, this diorama base offers Make painting small parts easier by using these alligator-type spring clips. Use one per
Acrylicos piece, or several to suspend longer pieces. 36 clips per packgage. Choose style below.
many possibilities. The irregular features of the terrain, Vallejo
the level of the railroad tracks and the stones in the road #90233 Infini Regular Paint Clips Wood handle with metal clip. Pack of 36. $13.95
Still Water.
form a perfectly natural terrain. Scenic base supplied #89905 Vallejo Scenics Use to create all #90234 Infini Advanced Paint Clips Metal handle with scratch-protecting silicone-
unassembled. Features include a corner of a loading Wooden Barrels, 1/35 kinds of water coated tips on metal clip. Pack of 36 clips. $16.95
platform and the remains of a wall. 12” x 8.25”. $45.95 scale. Set of 5, unpainted. effects. 200 ml. #90339 Infini Models Paint Clip Stand Custom-designed to hold the paint clips above.
Note: Bases are unpainted. Finished examples shown. $12.95 $13.95 Contains 1 stand, 1 Advanced paint clip, and 1 Regular paint clip. Made in Korea. $18.95

6 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 Painted and finished
model shown. Scenery and
vehicles not included.

#90449 Branchline Milk Shed Kit, HO Scale, by Scientific Before industrialized farming,
family dairy farmers would join co-ops which would accumulate milk to bring to these track-
side shelters to transport via rail to market. This laser-cut basswood structure complements
any rural dairy farm scene on your HO scale layout or diorama. 6” x 3.25” footprint. $29.95
#89707 American Heritage
Models Melville Dairy Foods
Divco Delivery Truck,
HO Scale $19.95
The Scientific HO Camera Car is Back and Better Than Ever!
Bring your layout to life with the Scientific HO Camera Car. This newly-upgraded version
#74781 Bachmann Dairymen’s
for 2022 enables you to enjoy first-person viewing of your miniature world, via the 1080p
League 40’ Refrigerated Box Car,
full hi-definition camera mounted in a WalthersMainline® RailGon open-top gondola car.
HO Scale $37.95
Features include:
• WalthersMainline® 53’ RailGon Gondola
HO 40’ Boxcar Case • 100-ton roller-bearing trucks
Railroad boxcars are perhaps not • Correct 36” turned metal wheelsets
only the best recognized pieces of • Proto MAXTM metal knuckle couplers
equipment ever put into service, but
• 1080p WiFi camera
also one of the most identifiable
symbols of the industry itself. #90154 Scientific
Now you can safely store and HO Camera Car with
transport these valuable Deluxe Carry Case $124.95
assets in our custom HO Includes a deluxe,
Boxcar Case. Crafted custom-made foam-lined
with wood and foam wood carrying case
to assure a secure fit, for safe transport and
our 17” x 12” case holds storage of the gondola,
up to eight HO 40’ boxcars. camera and USB charging wire.
#90520 HO Boxcar Case,
Boxcars are by Scientific $35.95
not included. 3 or more $32.95 ea.

#89662 Trains® Magazine

“Union Pacific’s Big Boys” NEW! Model Railroad Track and More
Hardcover Book is the complete story #90096 Bachmann® 36” Code 100 Nickel Silver Flex Track, HO Scale, box of 25 pieces $199.95
of the best-known and most-popular #90097 Bachmann® E-Z Track® 9” Straight Steel Alloy Rail with Black Roadbed, HO Scale, 4-pack $12.95
steam locomotives ever built, from #90098 Bachmann® E-Z Track® 18” Radius Curved Steel Alloy Rail with Black Roadbed, HO Scale, 4-pack $12.95
their origins all the way through the #90101 Bachmann® E-Z Track® 22” Radius Curved Steel Alloy Rail with Black Roadbed, HO Scale, 4-pack $14.95
much-anticipated restoration #90102 Bachmann® E-Z Track® Steel Alloy “Your First Railroad Track Pack,” HO Scale $209.95
of No. 4014. This handsome edition,
#90099 Bachmann® E-Z Track® 9” Straight Rerailer with Wire Steel Alloy Rail and Black Roadbed, HO Scale $12.95
with a foreword by Trains editor Jim
Wrinn, is the perfect reference book #90100 Bachmann® Power Pack and Speed Controller $89.95 See our website for details on these
and collector’s item! $44.95 #90113 Atlas® HO Code 83 Super-Flex Track (3’ sections), 5-pack $36.95 items, plus more track products.

Animation Brings Your #89536 Micro-Mark UncoupleLITETM Designed by our

Product Development Team and manufactured exclusively You Need ‘Em, We’ve Got ‘Em!
Projects to Life Makes a great for Micro-Mark, UncoupleLITETM provides the easiest, most
go-anywhere accurate way of uncoupling many HO, On30 and O scale
precision pinoint locomotives and cars (plus some N scale) at any location
flashlight, too! on your model railroad, even in total darkness. A click of
the button sends a brilliant beam of cool LED light through
the clear acrylic rod right to the tip of the tool, illumi-
nating couplers with a clarity and focus no other tool can
match for precision uncoupling action. To use, simply slide
the tapered tip of the tool between the knuckles of the
Uncouple locomotives couplers and twist gently, smoothly separating the cars.
What makes this high-torque, permanent magnet, DCC- and cars anywhere on With a lighted tip length of 4” and less than 1/4” dia. at
compatible, 12V variable speed motor special? It is your model railroad, its thickest, UncoupleLITE is also extremely useful as a
reversible*, which means you have so many more options even in total darkness! precision pinpoint flashlight, providing focused, non- #90246 Metal Coupler Covers, HO Scale,
for creating special effects and visual interest. Lifetime- glare illumination inside machinery and confined areas by Scientific, Pack of 20 Because these HO Scale Metal
lubricated motor is designed to provide consistent, reliable where no other light can go. Includes 4” x 1/2” diameter Coupler Covers are always in demand and not-so-readily
service and long life. Depending on power supply, you can stainless steel body with push-button on/off switch, available, we decided to manufacture our own to make it
set it to run from 6 to 60 rpm. 1:76.8 reduction ratio • 5/32” removable 4” x 1/4” acrylic light rod, and key ring. easy for you to get them and add them to your rolling
dia. x 3/8” long output shaft • 047” drive shaft hole • 1” dia. Requires one AAA battery, not included. $19.95 stock fleet. Like their hard-to-find counterparts,
x 2” long, plus 9/16” output shaft and collar.
Scientific’s Metal Coupler Covers fit virtually all coupler
*When wired with #83257 Toggle Switch.
styles and manufacturers. Use them to snap and lock
#87360 High-Torque Animation Motor $24.95 couplers tightly into place, securing the connection
#83257 Toggle Switch (3-Pole, Double Throw) $5.95 between railcars. Provided in packs of 20. Couplers and
10–24 pcs. $4.95 each 25 or more $3.45 each rolling stock are not included. $15.95

See our website for a video of this item in use 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 7
 Introducing the Best High-Quality, Precision
Hand Tools from Knipex
Precision Hand Drills
Available for the
Discerning
Craftsperson #90199 #90198

#89875
KNIPEX®
Cobra® XS
Introducing the smallest
fully-functioning precision slip-joint
plier in the world…the KNIPEX® Cobra® XS.
This tiny titan of a tool is only 100 mm long and fits
#90200 comfortably in the palm of your hand, but don’t let its
compact size fool you. The Cobra® XS is designed and
engineered to be among the very best of its kind,
featuring eleven position settings which capably and
securely “bite” fasteners, pipe, fittings and more up to
24 mm. Fits in spaces far too small for its larger siblings
and can be operated easily with just one hand. $44.95
See our website for
additional images of each drill.
Micro Mark’s Premier Elite Line of Tooling now offers these 3 top-of-the-line Surgical Hand Drills! Used by professionals for precision
surgeries, they have a perfect application for serious craftspeople and hobbyists of all levels! Each drill features stainless steel universal
keyed chucks that open to 1/4” and close to zero. As with any high-quality tool, each drill includes its own case with hard-foam-lined #89880
interior and formed nesting cut-outs for each tool’s unique form. Buckling straps within hold each drill securely inside. Flip-top magnetic KNIPEX®
closure and leather strap handles finish the beautiful packaging. Made from Japanese stainless steels. Needle-Nose
#90199 Premier Elite Moore Surgical Hand Drill A beautifully crafted solid surgical stainless steel manual T-handle drill. Based on 45° Plier
the ageless design of dual 90° angled bevel gears working in unison with the rotated crank handle for drilling and burring operations. A High-Quality 45°
11” in length with a 4” tall x 3/4” wide solid contoured “T” handle. 1.6 lbs. Includes two 1/8” drills. $159.95 Needle-Nose Plier.
#90200 Premier Elite Surgical Hand Drill with Reinforced Fiber Handle A beautifully machined, contoured, reinforced handle This is the perfect precision plier
permanently pinned to the stainless steel shaft and chuck highlights this hand drill. Opposing flats on the handle prevent roll-away. for exact assembly, bending, and adjusting work.
At just over a half-pound, its 6-1/2” length fits agreeably in your hand for precise drilling and burring of materials. $79.95 With extra-long 55 mm jaws, the plier features a smooth
gripping surface with carefully deburred edges. The 45°
#90198 Premier Elite Ralk Surgical Hand Drill Beautifully crafted stainless steel manual drill designed with a left-handed offset bent jaws are made of chrome vanadium electric steel,
ergonomic gripping handle and a smooth-running right-handed gear driver handle that offers comfort and control of drilling and forged and oil-hardened.
deburring operations. Twin shaft bearings provide smooth revolutions in either direction. Body is black powder coated, and the 1.3 lbs. List $75.95 Our Price $68.95
feels good in the hand and beckons the quality of workmanship that you should expect. Unit is 6” high, 7” long (rear bearing to tip of
the chuck) and just shy of 5” wide from offset handle to the driver handle tip. $169.95

#89881
KNIPEX®
Electronics
Super Knips
A High-Quality Electronics
Plier for Ultra-Fine Assembly
Work in Electronics and Fine Mechanics.
Ideal for working inside the confined interiors of delicate
#90145 Non-Marrring Nylon Jaw Tube #90144 Non-Marring Brass Jaw #90146 Coil Cutting Plier electronic equipment, on printed circuit boards, and
and Rod Plier This non-marring plier uses Flat-Nosed Plier for Jump Rings precision devices such as measuring equipment and
nylon jaw inserts to eliminate marks and Typically, non-marring metal-forming pliers It may look funny on its own, but this other sensitive apparatus, this compact tool goes where
nicks when working with wire, rods and are the nylon-lined type that serve very unique specialty plier was specifically full-size tools can’t. Electronics Super Knips’ cutting
tubing. Designed with mating semi-circular well for scratch-free bending and forming. designed to make perfectly round jump edges are ground without bevel and hardened to
indentations in each jaw side, the plier This brass-lined piler offers a much firmer rings quickly and easily. Review our video approx. 64 HRC for superior flush-cutting. Precision tips
safely holds #6 – #16 gauge wire and tubing, platform for superior bending, and the flat, and see how well this special tool performs make extremely accurate cuts in fine wire and fiber optic
and rods from .050” to .160” dia. Tips close half-hard brass won’t damage the material an otherwise arduous and time-consuming cable. Made of oil-hardened, high-grade special tool
to zero to grab even thinner material. being formed. The 1/4” wide by 7/8” long task. Made from stainless steel, this 7” steel. List $48.95 . . . Our Price $44.95
Made from stainless steel, this 6-1/2” brass jaw linings have tips that close to long plier features leaf springs, box joint
long plier features leaf springs, box joint zero. Made from stainless steel, this 5-3/4” construction, and super-comfortable foam
construction, and super-comfortable foam long plier features leaf springs, box joint grip handles. Works best on 1/8” to 5/16”
grip handles. Includes an extra pair of construction, and super-comfortable foam diameter jump rings.
nylon jaw linings and screws. $15.95 grip handles. $15.95 $15.95
#89878
NEW “Parrot Peak“ #90143 #90142 #90149
KNIPEX CoBolt S
Gem-Setting Pliers Compact Bolt Cutter
Parrot Parrot Jeweler’s
A Tiny Giant with 25-Fold
These three specialized Peak Peak Vecorting
Manual Force Amplification!
pliers are essential for Prong Stone Plier
The KNIPEX CoBolt S Compact Bolt Cutter
properly setting gems Opening Setting $14.95
is a little tool with a big impact, cutting soft and hard
and adjusting the prongs Plier Plier
wire as well as piano wire with ease. Thanks to its small
of fine jewelry pieces. $14.95 $14.95
Grooved, size of 6.7” and its light weight of less than 7 oz, the
Commonly called CoBolt S fits comfortably in the hand without fatigue.
Parrot Peak pliers, each specially Flat, tapered jaws
formed tip Offset, grooved draw prongs toward It will reliably handle piano wire up to 3.0 mm and
has been designed to makes quick work of cutting bolts, nails, rivets, and
accomplish specific gently bends jaw holds prongs each other laterally
prongs outward securely, yet around the gem other medium-hard materials up to 4.4 mm in diameter.
operations. Made of chrome vanadium heavy-duty steel, forged
to remove gently while ensuring a
See our website for complete gems. and multi-stage oil-hardened. Made in Germany.
tightening. perfect fit.
details on using each plier. List $67.95 . . . Our Price $59.95

8 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 MODEL TRAINS SUPPLIES HAND TOOLS NEW ITEMS
Step Up to Our Very Best Wire Cutters Slim Line Titanium Coated
These slim precision tools are right at home Precision Metal Forming Plier Set
working in confined spaces; These beautifully-crafted wire
plus, their carbide cutting forming pliers are made of
inserts leave a smooth, surgical-quality Japanese
burr-free edge on both hard stainless steel and titanium
and soft wire. Made of high carbon 420 plated for precision and durability.
Japanese surgical stainless steel with Set includes a Micro 3-Step
gold electro-polished handle Looping Plier with 3/64”,
ends, these powerful cutters 1/16” and 5/64” looping
will even slice through music wire pin and matching concave
up to .026” with ease. Set includes a 45° angled receiver on the opposite side,
flush cutter that cleanly snips wire right-to-the-tip, and a 4-Step Bending Plier with 1/8”,
and a straight-jaw cutter with a perfectly matched pair 11/64”, 7/32” and 1/4” steps and flat-facing
of “L” shaped carbide edges that act as a male / female internal jaws with one slightly serrated side
die set, leaving a flat, distortion-free end. These for gripping and one non-serrated side.
beautifully made cutters are ideal for jewelry #89944 Slim Line These high-quality tools are #89945 Slim Line
designers and other serious 2-piece Hard Wire excellent for use in jewelry 2-piece Titanium Coated
makers. Each plier is and Soft Wire Cutter Set design and other fine wire Precision Metal Forming Plier Set
5” long. List $129.95 . . . Our Price $64.95 work. Each plier is 5” long. List $79.95 . . . Our Price $46.95

Our high-quality, non-marring, Nylon-Head Metal Forming Pliers are perfect for forming and contouring brass, copper and precious metal wire and metal strip stock without
marring the material. Made of stainless steel, these pliers feature box-joint construction, leaf spring return and medium density foam handles which provide superior comfort and
ergonomics compared to pliers with PVC-coated handles. Also, the nylon heads can be customized to your own design, if desired, by carving and shaping the existing head shape
to your own specifications. Each plier includes an additional head for this purpose, or, to use as a replacement if the original head becomes damaged. Pliers are 5-3/4” long.

#89796 Large-Radius Nylon-Head Metal Forming #89797 Medium-Radius Nylon-Head #89798 Medium U-Shape Nylon-Head Metal #89799 V-Shape Nylon-Head Metal Forming Plier
Plier Perfect for creating wide-diameter rings, earrings, Metal Forming Plier Forming Plier makes smooth curves up to 3/8”. Head is makes 1˚– 90˚angular bends ; also forms rings and curves
cuff bracelets, and more. Head is 7/8” x 3/8”; forms 3” Makes 5/8” to 1” diameter circles. Head is 3/4” x 3/8”. 11/16” x 3/8”; inner “U” shape has a 13/32” wide male when light bends are made at close intervals. Head is
to 4” circles. $11.95 $11.95 head centered in the female side of the head. $11.95 1-1/8” with a 1/2” wide x 9/32” deep V notch. $13.95

Not for use with soft wire.

#89244 #89117 Hard Wire-Cutting Plier with #89119 90° Bent Nose Plier
12-Space Carbide Jaw Inserts Got a hard wire This clever variation of needle nose pliers
Wooden cutting job? Either you can get this plier features non-serrated tapered jaws that
Tool or plan on trashing anything else! Carbide are bent at a 90° angle, 3/8” from the tip.
Organizer inserts at the jaws’ cutting edge bite This allows the jaws to grip in tight spaces
through music wire up to 13 gauge (.031”) and at angles which ordinary pliers can’t.
#89245 16-Slot Wooden Tool Organizer Hold up to 12 small tools in a 4” diameter and other spring-type wire up to .048” with Useful for many applications including
Store up to 16 small tools in 7” x 4” x 3-1/4” space with this nicely-made wooden ease. Other quality features include box soldering, wire and jewelry work, model
of space with this handsome organizer. organizer. Round holes are approx. joint fulcrum for exceptional leverage building and more. Box joint construction
Offset rows keep tools visible and 1/2” diameter. Approx. 3” tall. without straining and spring return action. with leaf spring return. 5-1/2” long.
accessible. $17.95 2 or more $14.95 ea. $15.95 2 or more $12.95 ea. 7” long overall with 1” nose. $25.95 $9.95

High-Power Rare Earth Super Hold It However

Magnets Have Dozens of Uses You Want It with Our #90189 Brass
Parallel Hand Vise
With massive pull force of nearly 6.5 lbs. each, Universal Clamp holds small parts
these small but powerful Super Magnets are Ingenious tool holds small and while working in
sure to find their way into all sorts of projects odd-shaped parts at any angle the hand or on the
where a strong and durable – yet removable – and hands-free for carving, workbench. Metal
closure, holder, etc. is needed. Magnets are sawing, filing, etc. The eight guide pin holds the jaws
only 1/8” thick x 1/4” wide x 1/2” long and included steel pins adjust to 60 different in perfect alignment and
magnetized all the way through. Great for positions to hold even the most irregular opens from zero to 9/16”.
cosplay and prop-making applications too! shapes. The heavy base features Inner faces of the jaws are
Railroad modelers: Repower, restore and molded-in holes for bench grooved to hold round
improve performance of old motors by mounting. Includes 2” diameter stock. Jaws are 3/8” wide
replacing original Alnico magnets with solid aluminum head with steel and 11/16” deep.
Super Magnets! guide pins and screw. Lacquered hex machined
#89252 All-Position handle is comfortable in
Ships by ground to 48 contiguous U.S. only. Universal Clamp with Base your hand and overall
#84991 Super Magnets (Pkg. of 20) $19.95 $30.95 length is 6”. $20.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 9
 NEW Multi-Purpose Driver Sets Provide Exceptional Utilty and Excellent Value

Goodbye, Heavy, Bulky, Expensive Drivers and Drills…Hello HYBRO!

Sleek and powerful, beautiful yet practical, the multi-purpose HYBRO 400
Power Driver does everything you need it to do with style and ease.
HYBRO is well-balanced, compact, and fits perfectly in the hand
with just the right weight; substantial, but not at all heavy. This
ergonomically contoured driver is so simple to use, you can
easily operate the push-button activated tool at any angle
with one hand. Just pick up HYBRO and go to work. You
won’t want to put it down! With high-end features including
go-anywhere portability, USB rechargable internal 3.7V battery,
quick-release chuck, choice selection of bits and elegant case, HYBRO
is a great addition to anyone’s tool collection. Makes an excellent gift, too!
Set includes: #89995 Ratchet Wrench Driver Set
• 3.7V HYBRO 400 Powered Driver This great multi-purpose set includes a double-sided,
• Fourteen 25 mm bits: PH1, PH2, PH3; SL4, SL5; H3, H4, H5, H6; direction-reversible 1/4” driver (one side for bits, the
T5, T10, T15, T20, T25 other for sockets), magnetic extension adapter, speed
• Two 75 mm bits: PH2, SL5.5/PH1 (slim) cap and 20 of the most useful driver bits and sockets:
• 25 mm hex adapter and 25 mm quick release adapter 9 Metric sockets: 4, 5, 6, 7, 8, 9, 10, 11, and 12 mm;
• Micro USB charging cable 2 slotted drivers: 5/32” and 3/16”; 2 Phillips drivers:
• Key chain tool tether with mini carabiner-style clip #1 and #2; 3 Torx drivers: 20, 25, and 30; 4 hex drivers:
• Fitted, high-density foam lined case with magnetic closure 3, 4, 5, 6 mm; hex-to-square driver adapter. Snap-lock
#89867 HYBRO 400 Power Driver Set $69.95 lid keeps everything neat and organized inside the
sturdy 6” x 3-1/2” x 1-1/4” plastic case. $12.95

Sleek, Light and Powerful Ultra-Slim Power Driver Set This Power Driver is a Torque Monster!

This unique 4V rated DC lithium-powered Ultra-Slim Driver Set is ideal for technicians The beast is unleashed with this powerhouse 1/4” hex drive Variable Torque Power Driver!
and hobbyists. At just 2.5 oz, this feather-light, yet powerful driver is comfortable in your Adjustable torque levels from 1 to 3 newtons of force handle jobs from the most delicate
hand and a workhorse on the bench or on-the-go. Features include an in-line forward to the most demanding with finesse and control, so driving 1” wood screws repeatedly
and reverse switch and 3 bright LED lights that illuminate your work. Internal battery is into 2 x 4 lumber will go just as easily as removing dozens of mini screws from a mechanical
USB rechargeable and is back to full power in only 50 minutes; LED indicator shows when assembly. 1-1/2” diameter x 7-3/4” long body includes rubberized side panels for sure
charge is complete. Ultra-Slim driver body is only 5/8” in diameter with two built-in flats grip, in-line forward and reverse rocker switch, anti-roll-away projections molded into
to prevent tool from rolling; 7” long overall. Provides .25 Newtons / .185 ft. lbs. of torque. the head, 4 bright LEDs to illuminate your work, and a USB-C socket with a moisture
4 mm drive. Set includes • Ultra-Slim 4V Power Driver • 6 nut driver sockets: 2.5 mm, protected rubber door at the back end of the tool. Plugs into standard USB connector to
3 mm, 3.5 mm, 4 mm, 5 mm, 6 mm • 12 M4*45 mm bits: Phillips #0, #1; Torx 7, 8, 9, 10; recharge. Set includes: • 3.7V DC Lithium Powered Driver • Pozi drive: #0, #1 (2 pieces.),
spanner/snake eyes: 2.0, 3.0; triangle: 2.5, 3.0; tri-wing: 0.6, 2.0 • 12 M4*28 mm bits: #2 (3 pieces), 3; Phillips: #0, #1 (2 pieces), #2 (3 pieces), #3; Torx: 10, 15, 20, 25, 27, 30;
slotted #1, #2, #3; 5-node: #4, #5, #6; Phillips: #000, #00; Torx 3, 4, 5, 6 • Tweezer • Mini pry hex: 3, 4, 5, 6; square: 0, 1, 2; slotted: #2, #3, #4, #5, #6 • 1/4” x 1-3/8” drive bit extension
bar • Manual screwdriver • iPhone sim card removal tool • USB / USB-C cable • Plastic case. • 2” long P2 driver • USB charger cable • Plastic storage/transport case.
#89993 Ultra-Slim Power Driver Set $34.95 #89994 Variable Torque Power Driver Set $44.95
Add the optional #86259 Drill Chuck to transform your Ultra-Slim Power Driver into a Add the optional #81852 1/4” Shank 3-Jaw Chuck to transform your Variable Torque
slow-speed micro drill! Compatible with drill sizes from 1/64” to 1/8”. $19.95 Power Driver into a power drill. $11.95

#89998 Ratchet Screwdriver/Wrench Combo Set

This is the Ratcheting Screwdriver and Wrench Set that
truly does it all! Part of our NEW Precision Driver Line,
this all-in-one set includes a sleek, rubberized
screwdriver handle with magnetized bit holder and
3-position driver for right and left ratcheting action,
plus center-position lock, and an ergonomically
contoured 1/4” drive ratchet wrench handle. This
extensive, yet easily portable set is ready to tackle a
wide variety of projects from your workbench to the
jobsite. Makes an excellent gift, too! $18.95
1/4” drive sockets, bits and accessories include:
#89997 Ratchet Screwdriver Set #89996 Metric Ratchet Screwdriver Set
8 sockets: 5, 6, 7, 8, 9, 10, 11, and 12 mm; 18 driver bits:
This stout 1/4” drive ratcheting screwdriver fits well in Perfect for technicians, this 4 mm drive screwdriver set
Phillips #1, #2 and #3; Pozi drive #1, #2, and #3; slotted
the hand and features a 3-position driver for right and includes a sleek, rubberized handle with magnetized
#3, #4, #5, #6, and #7; Torx 10, 15, 20 and 25; hex #4, #5,
left ratcheting action, plus center-position lock. 5” long x bit holder and 3-position driver for right and left
and #6; 2-1/4” long extension.
1” diameter handle also features a swivel top. Set includes ratcheting action, plus center-position lock. 5” long x
4 mm drive bits include: 7 slotted screwdriver bits: 2, 2.5, 3, 4, 5, 5.5 and 6 mm; 3/4” diameter handle also features a swivel top.
Phillips #00, #0 and #1; Pozi drive #00, #0 and #1; 7 Phillips screwdriver bits: two each #0, #1 and #2 and Drivers and accessories include Torx 4, 5, 6, 7, 8, 9, 10
slotted 2, 2.5, 3, and 4 mm; Torx 5, 6, 8, 9 and 10; one #3; 8 Pozi drivers: two each #0, #1, #2 and #3; and 15; Phillips #00, #0, #1, 2; slotted 2 mm, 2.5 mm,
hex 2, 2.5 and 3 mm. 7 hex drivers: 2, 2.5, 3, 4, 5, 5.5, and 6 mm; 6 Torx drivers: 3.0 mm and 4 mm; 4-3/4” extension bar. Snap-lock lid
Snap-lock lid keeps everything neat and organized 10, 15, 20, 25, 30, and 40; 2 square drivers: S1 and S2. keeps everything neat and organized inside the sturdy
inside the sturdy 9” x 4” x 1-1/4” plastic case. Sturdy case keeps everything neatly organized. $12.95 6” x 3-1/2” x 1-1/4” plastic case. $12.95

10 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 Fujiya “Kuorkin” (Black Gold) Premium Quality Hand Tools are the Pinnacle of Innovation

#89630 Fujiya Thin Jaw Adjustable Wrench #89631 Fujiya 2-in-1 Adjustable Wrench with Quick
This is not your ordinary adjustable wrench! The thinnest Alligator Jaw If you have multiple nuts and bolts to
#89633 Fujiya Reversible Jaw Adjustable Wrench of jaws allow you to access nuts and bolts in those remove and install…metric, standard and square head… #89632 Fujiya Rapid Clutch Plier / Wrench Combo
and Pipe Wrench otherwise impossible-to-access areas, like when two this is a must-have tool. Its quick multi-notched alligator With a simple push of the button in the center channel,
Two tools in one compact design! Measuring just 8-1/2” nuts are jammed together to prevent component jaw turns nut and bolt head sizes from 3/16” to 11/16” the clutch mechanism of this Plier / Wrench Combo
in length, this clever tool allows you to put its hardened slippage and a regular wrench is too wide to grab only without damaging corners. Just grasp the head, latch rapidly adjusts jaws from 0 to 1-5/8” to fit hardware size.
jaws to work in close and confined spaces where other one nut; or, when you find that the clearance provided to onto the corners and go to work. This tool is great for Toothed grooves inside the slip joint allow the jaws to be
wrenches can’t fit. With a smooth jaw on one side and mount a caster wheel onto a chair is nowhere near holding one side of a bolt and nut combo while fastening, adjusted to 18 different positions for the most secure fit.
finely serrated, angled teeth on the other, this wrench enough for your regular adjustable wrench. Problems and it can also be used to grab the round shanks of most Unlike other adjustable-jaw tools on the market, this
easily handles all bolts sizes from 0 to 1-5/16” and pipe solved! This tool will save valuable time because you’ll stripped slotted, phillips or hex driven screws within its tool’s adjustable jaw features a spring-like closing action
sizes from 5/32” to 1-3/4”. The serrated jaw side will always have the right wrench for the job in-hand. working range in order to remove them. which moves the jaw over 1/4” toward the fixed jaw in
even help remove damaged, stripped hardware by Jaws are just over 1/8” thick and open from 0 to 1-5/16” The adjustable wrench side securely fits screw sizes parallel, providing far more gripping strength than
grabbing screws and bolts by their heads. Heavy duty with a depth of 1-1/8”. Handle is rubber coated for sure from 0 to 1-5/16” across the flats on bolts and nuts. angled jaws as you close the handles. Smooth jaws are
rubberized handle covering provides sure grip. grip. Overall length: 6-5/8”. A well-made tool for serious craftsmen and mechanics. 5/16” wide x over 1” deep; overall tool length is 10-1/4”.
List $45.95 . . . Our Price $35.95 List $44.95 . . . Our Price $35.95 7-3/4” total length. List $42.95 . . . Our Price $33.95 List $69.95 . . . Our Price $57.95

#89636 #89637 #89634 #89635

Fujiya Heavy Duty Wire / Bolt Cutters Fujiya Electrician’s and Mechanic’s Pliers Professional quality 8-1/2” long electrician’s and mechanic’s pliers by
Typically, wire and bolt cutters are made of steel, are over-weight, and feel heavy in the hand. Fujiya solved this problem Fujiya are beautifully crafted and well-balanced in the hand. Angled channels guide stranded and solid core wire into
by using aluminum alloy in the handles of these well-designed tools, wrapping them in comfortable, nicely-formed super-sharp cutting edges that easily remove wire coatings from 10 to 22-gauge wire (Curved Handle Plier) or 10 to
resin hand grips, and topping them with finely-crafted, hardened steel cutting heads. Just shy of 8-1/2” in length, 22-gauge wire (Straight Handle Plier). 3” long serrated noses reach into narrow openings to retrieve wires, and
each Fujiya Wire / Bolt Cutter weighs only about 5 ounces, but packs the strength and toughness of much bigger and concave, serrated jaw tips are ideal for grasping bolt heads. Two integral screw cutters (M4 .125” and M3 .094”) cut-off
heavier counterparts. Cuts steel bolts and wire up to 4 mm (5/32”/.156”) or equivalent to AWG 11, and piano wire up screws that are too long for the job, and two built-in crimpers put the finishing touch on wire connectors. Tools are
to 2 mm (5/64”/ .078”) or equivalent to AWG 14. Each includes adjustable stopper bolt and handle closure strap. designed for use with copper and tin-coated copper wires only. Choose handle style below.
#89636 Fujiya Heavy Duty Wire / Bolt Cutter with Flat, Straight Jaws. $29.95 #89634 Fujiya Electrician’s Plier with Straight Handles. List $44.95 . . . Our Price $41.95
#89637 Fujiya Heavy Duty Wire / Bolt Cutter with Curved, Angled Jaws. $33.95 #89635 Fujiya Electrician’s Plier with Ergonomic Curved Handles. List $44.95 . . . Our Price $41.95

More Superior Quality Hand Tools from Fujiya of Japan #88692 5-piece
Our strong relationship with Fujiya has allowed us to offer a selection of top-quality tools you won’t find anywhere else in the United States. Joining our Fujiya Hand Tool Set
selection of superior quality Fujiya tools are these exceptional items: $104.95
#88618 Fujiya Super-Long-Nose Straight Pliers with Cutter Set includes the two Fujiya
Slim, pencil-thin, black powder treated tips are thin and long
enough to reach almost anywhere. Blackened finish reduces
Made in Long-Nose Pliers and Short
Handle Adjustable Wrench
glare. Tips reach 2”; 6” long overall. Includes internal soft Japan shown at left, plus:
wire cutter with smooth jaws and spring return. $19.95
#88619 Fujiya Super-Long-Nose Angled-Tip
Pliers with Cutter same features as above,
but with 3/4” tips angled at 45˚. $19.95
#88620 Fujiya Short-Handle Adjustable Wrench #87609 Fujiya 13˚ Super-Sharp
This must-have tool packs full-size 1-1/8” jaw capacity into Sprue Cutter slices through plastic
only 4-1/4” of space. Specially notched jaws prevent sprues up to 3/16” diameter with virtually zero stress, leaving the cleanest parts
round-off and hold tight with 1-1/4” deep reach; we’ve ever seen. AND #87626 Fujiya 25˚ Sprue Cutter Originally designed for
rubberized handle coating provides sure grip. $19.95 superior plastic sprue cutting, we have also found this amazing tool to be the best
soft wire cutter on the market, making the quickest, cleanest cuts in common soft
#88691 3-piece Fujiya Plier & Wrench Set 30 gauge to 14 gauge wire (.010” to .064”, or 1/16”) with ease.
Includes all three of the tools above for one great price. $54.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 11
 TITANIUM
Micro-Mark® Premier Elite Titanium Plated Micro Chisel and Gouge Sets – Ultimate Carving Tools for the Discerning Craftsperson
For years, Micro-Mark customers have been asking us for an expansion line to our super-popular 7-Piece Stainless Steel Chisel Set. After much work to develop an exclusive selection,
we are proud to introduce The Premier Elite Line of Chisels and Gouges by Micro-Mark. Over a 2-year period, we designed and tested a wide variety of materials, shapes and designs
to provide our customers with the best micro hand-chiseling tools on the market in terms of quality, durability and utility. We then secured a manufacturer with decades of experience,
capable of meeting or exceeding our requirements for consistently high workmanship. We are pleased to say that we have not been disappointed, and neither will you!
Expertly crafted from premium Japanese and French stainless steels and combined our special titanium plating
process, each top-quality chisel and gouge is hand-honed to perfection. Their unique handle design employs a
joined deep diamond knurling with lateral channels that provide a positive gripping area for precise control.
Unless otherwise noted, each tool is 6-1/2” long with 3/8” diameter handle. Premier Elite chisels feature an
extremely low profile of approximately 25˚. These exceptional and handsome tool sets will
provide the precision and long-life that enthusiasts demand and deserve.

Introducing our Premier Elite U Gouge and Dog Leg V Gouge Sets
Complementing and expanding our line of Premier Elite tools are these U and V Gouge sets.
Both sets are ideal for adding detail, texturing, creating soft curves and delicate undercuts in your
projects. These beautifully made gouges are hand-honed on the top and bottom of the cutting
edge to provide the very sharpest cuts.
#88704 Premier Elite 7-piece U Gouge Set
This set is equivalent to a #8 design, as we consider the #8 to be one of most useful U Gouge
styles. U Gouge widths included are approximately: 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm,
7 mm and 7.5 mm. Each tool is 5-3/4” long. List $99.95 . . . Our Price $89.95
#88707 Premier Elite 5-piece Dog Leg V Gouge Set
Also known as parting tools, these Dog Leg V Gouges include the following
approximate widths: 2.5 mm, 3 mm, 4 mm, 4.5 mm and 5.5 mm.
Each tool is 6-5/8” long. List $99.95 . . . Our Price $89.95 #88704 #88707

#88702 Premier Elite #88701 Premier Elite #88705 Premier Elite 3-piece
10-piece Straight Tip 10-piece Skew Tip Specialty Blade Chisel Set
Micro Chisel Set Micro Chisel Set features the most sought-after
in widths separated in widths separated angles and shapes for working
by approximately by approximately in places where standard
.5 mm in the .5 mm in the chisels cannot go. Includes
following sizes: 0.5, following sizes: 0.5, ”sheep’s foot” straight-
1.0, 1.5, 2.0, 2.5, 1.0, 1.5, 2.0, 2.5, angled side chisel,
3.0, 3.5, 4.0, 4.5 3.0, 3.5, 4.0, 4.5 needle point angled
and 5.0 mm. and 5.0 mm. chisel and concave
List $149.95 List $149.95 curved chisel for
Our Price Our Price side removal and
$129.95 $129.95 pull removal in
carvings.
List $39.95
Our Price
$34.95

Titanium Plated
Super-Fine Tweezer Set
With the luster and durability of titanium, these super-
fine-tipped, non-serrated forceps/tweezers have perfectly
mating halves for ultimate precision. Set includes: 2 Rose
Gold Titanium Forceps, each with 3 pairs of stamped holes
in the handle for reduced weight and non-slip grip. Raised
1/4” flat shoulders inside the tip halves provide extra grip-
#88703 Premier Elite 10-piece Left and Right Radius Chisel Set #88706 Premier Elite
ping power. Rose Gold Forceps are 3-1/2” and 4-1/4” long.
with widths separated by approximately 1 mm in the following sizes 5-piece Dog Leg Chisel Set in widths of 1, 2, 3,
for both left and right removal: 1, 2, 3, 4 and 5 mm. The range provided 4 and 5 mm provide a higher angle of stock 2 Dynamic Blue Titanium Forceps, one featuring a super-
allows easy carving of slow and tight-area curved forms on flat surfaces removal, allowing deeper, quicker carving than fine, shouldered and angled tip, weight-reducing oblong
and, since the working angle is from the side, it enables you to carve standard straight chisels. The location of the cut-out, and grooved gripping area; the other is a Boley-
raised (convex) and receded (concave) sloped sections as well, such as bevel is ideal for finishing flat recesses and style, featuring a long nose and super-fine, non-shouldered,
carving ears in a figure, for example. These shapes cannot be carved backgrounds on a relief carving where clearance pointed tip. Dynamic Blue Forceps are 3-5/8” and 4-3/4”
with straight or skewed chisels since the direction of removal is forward is limited. long overall.
only. List $155.95 . . . Our Price $124.95 List $84.45 . . . Our Price $69.95 #88591 4-piece Titanium Plated Tweezer Set $84.95

12 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE See our website for a video of this item in use
 The All-In-One #89589 Titanium Plated “B&W”
Micro Squeeze Scissor Set
Carving Set You’ve
Been Asking
for Has Now
Arrived!

These unique scissors provide the most delicate, precise control

imaginable, even in awkward positions. Fingertip squeezing action
actuates the ultra-sharp, super-hard, 60˚angled offset blades for the
finest cuts. Made of Japanese surgical stainless steel combined with
our special titanium plating process, these professional-quality,
long-lasting scissors will be your go-to choice for precision cutting
from the moment you try them. The “B” style scissor is 2-1/2” long;
the “W” style is 4-3/8” long; cutting tips of both are 3/8” long. $44.95

#89775 Specialty Tool

Protective Case
This exceptional and most useful 15-piece collection of our Premier Elite Chisels and Gouges allows the Synthetic leather
user to jump right into the world of wood carving. These beautiful tools are sure to become your favorites. zippered tool case
#88708 Premier Elite 15-piece Micro Chisel and Gouge Set includes three Skew Chisels, 1 mm, 2.5 mm stores, protects and
and 4 mm; three Straight Chisels, 2 mm, 3 mm and 5 mm; two Radius Chisels, 3 mm left and 3 mm right; one transports up to 15
Specialty Needle Point Angled Chisel; two Dog Leg Straight Chisels, 1 mm and 3 mm, two #8 U Gouges, of your most prized Tools not incl.
2 mm and 4 mm; and two V Gouges, 2 mm and 4 mm. This exclusive set also includes a custom-designed, tools. $13.95
foam-lined, slide-out drawer case for safe-keeping and transport in style. List $199.95 . . . Our Price $179.95

#88578 Curved Watchmaker’s #88581 Slide Lock Soldering #88577 Swiss Style #88579 Boley Style GG #88582 Cross Locking,
Tweezer Titanium plated. Tweezer Watchmaker’s Tweezer Tweezer Titanium plated for Self-Closing Tweezer
Smooth points. 4-5/8” long. Titanium plated for luster and Titanium plated for luster and luster and durability. Hollow, Titanium plated for luster and
Bend lets you rest your hand on a durability. Medium sharp points. durability. Fine, smooth points. very light spring tension. Smooth durability. Serrated points.
workbench while using. $12.95 4-3/4” long. $14.95 4-5/8” long. $12.95 points. 4-3/4” long. $12.95 6-1/2” long. $19.95

#88585 Micro Tweezer, #88586 Micro Tweezer, #88587 Micro Tweezer, #88588 Flat / Smooth Decal #88580 Double Bend Dental
Straight Tips 45˚ Curved Tips 90˚ Curved Tips Tweezer Tweezer
Titanium plated for luster and Titanium plated for luster and Titanium plated for luster and Titanium plated for luster and Titanium plated for luster and
durability. Fine serrated points. durability. Fine serrated points. durability. Fine serrated points. durability. For perfect decal durability. Fine serrated points.
Approx. 4” long. $12.95 Approx. 4” long. $13.95 Approx. 4” long. $13.95 placement. 4-1/2” long. $12.95 6” long. $14.95

#88589
Giant
Long-Reach #88590 Pearl Tweezer
Tweezer Spherical indentations in the tips of our
Surgical Hemostats, Titanium Plated Pearl Tweezer securely grip round or
Titanium plated for
Originally made for surgeons, hemostats are now used extensively by makers. Use these small, irregularly contoured objects so you can
luster and durability.
light duty hemostats as a super slim needle nose plier, clamp, heat sink, vise, etc. Quality box joint easily place them in the exact position
Serrated, rounded
construction. Titanium plated for luster and durability. Approx. 5” long. Choose tip style below: you need. Titanium plated for luster and
tips. 12” long. $22.95
#88583 Surgical Hemostat, Straight Tip $14.95 #88584 Hemostat, Curved Tip $15.95 durability. Approx. 4-1/2” long. $19.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 13
 NEW ITEMS SUPPLIES MODEL TRAINS
Explore Micro-Mark’s top-shelf library of hobby books, how-to guides, reference books and more!

#89752 Metalworking for #88028 #87144 #87143 #88981 #89601 #89602

Home Machinists: 53 Practical Mini-Lathe Tools and Mini-Lathe for Home The Milling Machine for Home Gears & Gear Cutting for Home Basic Benchwork for Basic Lathework for
Projects to Build Yourself, Projects for Home Machinists, Machinists, by David Fenner Machinists, by Harold Hall Machinists, by Ivan Law Home Machinists, Home Machinists,
by Tubal Cain $12.95 by David Fenner $12.95 $12.95 $14.99 $12.95 by Les Oldridge $14.95 by Stan Bray $14.95

#90114 Electroplating for #88988 #87605 #87124 #87142 #87131 #88979

Amateurs: Classic Reference Learn to Turn, 3rd Edition Band Saw, The Missing Whittling Twigs & Branches, Learn to Carve Eyes and Lips, How to Carve a Wood Spirit in a Cane Topper Woodcarving,
for Small Workshops, Revised & Expanded, Shop Manual by Chris Lubkemann by Harold Enlow Hiking Stick, by Skylar Johnson by Lora S. Irish
by J. Poyner $11.95 by Barry Gross $19.95 $12.95 $12.95 $5.99 $9.95 $19.95

#90444 Eaglemoss Collections #89857 #82056 #87608 #88987 #88029 #88634

“Ghostbusters: The Inside Story” Learn To Make Amazing Resin & Pocket Ref Great Book of Wooden Toys, Making Innovative Wooden Power Carving Manual, Carving the Little Guys,
hardcover edition Epoxy Clay Jewelry, by Gay Isber 4th Edition Paperback by Norm Marshall and Bill Jones Toys, by Bob Gilsdorf The Best of Woodcarving by Keith Randich
$29.95 $15.99 $12.95 $19.95 $19.95 $19.95 $9.95

#88978 #88980 #88615 #88616 #89140 #87604 #87133

Making Poor Man’s Guitars, Complete Guide to Little Book of Wooden Boxes, Little Book of Wooden Bowls, Crafting with Gourds, Making Wooden Fishing Lures, The Beginners Guide: How to
by Shane Speal Making Wooden Clocks, Curated by Peter Korn Curated by Kevin Wallace & by Lora S. Irish by Rich Rousseau Sharpen Woodcarving Tools,
$19.95 by John A. Nelson $24.95 $12.99 Terry Martin $12.99 $17.99 $19.95 by Skylar Johnson $9.95

#89983 #89175 B-29 Photo Combat #89178 Deadly Duo: #89195 #89984 #89203 3D Printing & Laser #88033
Modeling World War II in the Diary: The Superfortress The B-25 and B-26 in WWII, Helicopter Gunships: Deadly Guide to Signals and Cutting: A Railway Modelling Getting Started in Model
Pacific, edited by Aaron Skinner in WWII and Korea, by Charles A. Mendenhall Combat Weapon Systems, Interlockings, by Dave Abeles Companion, by Jeff Geary & Railroading, by Jeff Wilson
$24.95 by Chester W. Marshall $27.95 $27.95 by Wayne Mutza $34.95 $24.95 Dave Renshaw $24.95 $21.95

#90323 #87361 #88445 #89267 #88034 #88055 #88056

The Model Railroader’s Guide Bachmann E-Z Model Railroads How to Build Realistic Creating a Back Scene, N Scale Railroading, Getting How to Build First Rate Ship Planking the Built-Up Ship
to Bridges & Trestles, Track Planning Book, HO, Model Railroad Scenery, Hardcover, by Paul Bambrick Started in the Hobby, Models From Kits, Model, by Jim Roberts
by Jeff Wilson $21.95 by Chris Lane $24.95 by Dave Frary $24.95 and John Ellis-Cockell $39.95 by Marty McGuirk $19.95 by Ben Lankford $19.95 $16.99

14 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 POWER TOOLS ALL NEW ITEMS
Finally, a Powered Sander Designed and Built with Modelers, Makers and Hobbyists in Mind!
After years of searching, this smooth-running sander is the winner all of us have been waiting for! Combining the
versatility of variable speed control with power boost circuitry that can maintain torque at slower speeds, this
compact yet powerful 5” Disk Sander may be the only powered sander you will find that is as capable with
plastic as it is with hardwood. Just dial in the speed you need from 1150 to 3600 rpm and you’re ready
to go to work. Its 5-1/2” wide x 3-3/4” table tilts down from 0˚ to 50˚ or up from 0˚ to 10˚ with a quick
turn of the side-mounted knobs. Use the tilt feature with the included angle gauge to make
perfect precision compound miters. At only 11-1/4” x 5-3/4” x 6-1/2” high, this small
sander will make a huge impact on your projects for years to come. Includes
an adjustable T-slot miter gauge, bench clamp for mounting your sander
to any work surface from 1/2” to 2-3/4” thick, on-board magnetic tool
holder, abrasive cleaning bar, vacuum port and hose adapter,
wrench, and six sanding disks: two each: 80, 150 and 240 grit.
Plugs into standard 120V 60 Hz AC outlet. Draws 1.1 Amp.
#90037 Variable Speed 5” Disk Sander $94.95
#90037K Variable Speed 5” Disk Sander Super Value Package
includes #90037 Variable Speed 5” Disk Sander and all
accessories listed above, plus a Micro-Mark Heavy Duty
Tool Case and 30 five-inch Sanding Disks (six 5-packs)
in the following grits: 80, 120, 240, 320 and 400.
Value $204.65 . . . Super Buy $189.95
Replacement 5” Sanding Disks
$9.95/pkg. of 5
#38109 #38110 #90059 #90060 #90061
80 grit 120 grit 240 grit 320 grit 400 grit

Micro-Mark FlexCam is the Next-Best Thing to X-Ray Vision!

For all the times you’ve thought, “If only I could see into…” this amazing tool is for you!
With a high-resolution, self-illuminating camera measuring only 8 mm in diameter
integrated into the end of a 9.8’ long flexible digital video transfer cable, you will not
only be able to see that which was previously unseen with remarkable clarity and detail,
you can even capture and save still images and real-time video.* Whether in total darkness,
inside the smallest of spaces and even under water, FlexCam opens up a whole new
world for viewing, inspecting, examining and diagnosing that which could never be
seen before with your eyes alone.
The FlexCam system places a tiny full-color camera at the end of a flexible, yet resilient
cable that sends high-resolution real-time video to its scratch-resistant 4.3” solid glass,
1080P HD LCD screen. Six brightness-adjustable LEDs surround the durable camera lens,
providing as much illumination as you need to clearly see in the tightest of spaces, even
in total darkness. With a focal length of approximately 1.5 inches to over 16 feet, FlexCam
provides exceptional versatility for a wide variety of applications. A push-button control
pad integrated into the viewing screen operates all of the camera’s functions, including
image up, down and rotation, brightness, image capture and more. Equipped with
IP67 waterproof technology, FlexCam’s camera can remain one meter under water for up to 60 minutes of continuous use without damage. Internal 2600mAh large-capacity
USB-rechargeable battery provides up to 4 hours of working time; recharges to full capacity in 3.5 hours. LED indicator shows when the unit has reached full charge.
Model builders use FlexCam to show off all of that unseen detail painstakingly included inside their models; model railroad enthusiasts use it locate trouble spots with track and
wiring in otherwise inaccessible areas inside tunnels, behind buildings and under benchwork; D-I-Yers and tradespeople use it to inspect and diagnose hidden issues inside walls,
under cabinets, behind appliances, even inside pipes and conduits; mechanics use it to examine the interiors of combustion chambers and behind dashboards. The list goes on
and on. The bottom line is that FlexCam is so versatile that there are literally hundreds of applications that make it an indispensable tool for just about everyone.
Micro-Mark FlexCam Set includes a detachable 4.3” LCD 1080P HD viewing screen with push-button camera controls and built-in micro SD card slot for image and video capture*,
molded handle, detachable 9.8’ (3 meter) flexible camera cable with 1920*1080 resolution camera lens and six brightness-adjustable LEDs, 4 handy camera-tip accessories: magnet,
hang-up hook, sideview mirror and protective cap, USB charging cable, and user’s manual. #90063 Micro-Mark FlexCam Set. List $357.99 . . . Our Price $129.95
*Image and video capture requires a readily-available micro SD card. Micro SD card is not included.

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 15
FREE! POWER TOOLS HAND TOOLS
Super Value Packages are an economical way to expand your workshop or get involved in a new hobby.
MICRO-MAKETM

SPECIAL OFFER! Purchase ANY Super Value Package

and you’ll receive a FREE pair of our Micro-Mark Exclusive Ultimate Airbrush
custom-designed, panoramic polycarbonate Shop Glasses – Outfit Super Value
a $19.95 value. Get yours now while they last!
Package
Variable Speed 5” Disk Sander
Super Value Package
The best variable speed 5” Disk Sander
is back with a complete, multi-purpose
package that will finish your projects to
perfection in your shop and on-the-go.
Package includes: #90037 Variable Speed 5”
Disk Sander with #90058 Abrasive Cleaning Stick,
6 Sanding Disks, Bench Mount Clamp, Miter Guide
and Dust Adapter • #89348 Micro-Mark Heavy
Duty Tool Case • 30 five-inch Sanding Disks
(six 5-packs) in the following grits:
#38109 80 Grit, #38110 120 Grit,
#90059 240 Grit, #90060
320 Grit, #90061 400 Grit. Getting started
#90037K with airbrushing
Variable Speed 5” Disk Sander has never been easier!
Super Value Package.
Value $204.65 Package includes: #86112 MicroLux® Airbrush Set • #86104 Fold-Up Spray Booth • #86108 MicroLux® Portable Compressor
Super Buy $189.95 • #80975 Cordless Paint Mixer • #86113 Regulator • #86117 Paint Jars • #29037 Acrylic Paint Set.
#86790 Micro-MakeTM Ultimate Airbrush Outfit Super Value Package. Value $351.65 Super Buy $249.95*

Proxxon Heavy Duty Resistance Soldering Wire Jewelry

Miter/Chop Saw Starter Set
Super Value Super Value
Package Package

Super Value Package

High power and high precision make this saw a winner. You’ll never go back to regular soldering again!
Package includes: #83418 Proxxon Heavy Duty Miter/Chop Saw • #80464 Package includes: #85522 MicroLux® Resistance Soldering Unit • #86589 Making wire jewelry is fun and easy with this all-inclusive set.
80 Tooth Standard Blade • #86326 40 Tooth Carbide Blade • #82593 Ferrous MicroLux® Soldering Tweezer • #80822 Stay Brite Silver Solder and Flux • #85151 Package includes: #86588 Micro Bending Plier • #85135 Wire Shaping Jig
Cut-Off Disk • #82594 Non-Ferrous Cut-Off Disk. Soldering Tweezer with Stand • #60381 Soldering Iron Stand • #70219 6” x 6” • #86487 Micro Plier Set • #86705 Double Flush Cutter • #86729 Cup Burr Tool
#87897 Proxxon Heavy Duty Miter/Chop Saw Super Value Package Soldering Pad • #14318 50 T-Pins • Metal Assortment. • #86730 Nylon Jaw Pliers • #86731 20 Gauge Brass Wire, 15 yards • #86732
Value $365.75 Super Buy $319.95* #87726 Resistance Soldering Set Super Value Package Wire Straightener • #86733 One-Step Wire Looping Tool • #86700 Jewelry with
#87897K Proxxon Heavy Duty Miter/Chop Saw Accessory Value Package includes Value $307.14 Super Buy $199.95** Wire book by Suzanne McNeill.
the 2 saw blades and 2 cut-off wheels from the set above, without the saw. #87726K Resistance Soldering Accessory Value Package includes everything #86734 Wire Jewelry Starter Set Super Value Package
Value $105.80 Super Buy $59.95 in the set above except the R.S.U. Value $140.19 Super Buy $119.95 Value $218.45 Super Buy $159.95

Magnetic Gluing Jig Wood Ship Modeler’s Super Value Inkjet Decal-Making Super Value
Super Value Package Package
Package

Perfect for precision mini assembly, this package takes The right set of tools to build wood ship models like a pro.
one of our all-time most popular tools to the next level. Package includes: Everything you need to make your own custom decals.
Package includes: #60304 Magnetic Gluing Jig, 10-1/4” Square, with eight #60378 5-piece Rigging Tool Set • #26104 20-Piece Micro-Size Drill Bit Set With Package includes: #82272 Decal Paper for Inkjet Printers (5 Sheets) • #82858
Magnetic Plates • One #89328 Wide Base 2”Vertical Steel Square • Two #89329 Index, #61 – #80 • #60348 Micro Hand Drill • #84048 Sand-It • #15215 Dobson Acrylic Gloss Fixative Spray (6 oz) • #81204 Squizzers Decal Scissors • #85821
Wide Base 3” Vertical Steel Squares • One #89330 Wide Base 4” Vertical Steel Miter-Rite • #85282 Pin Insertion Plier • #84419 Pin Collar Set • #14318 Sponge Applicators • 60907 Flat/Smooth Decal Tweezers • #88676 Decal
Square • #60305 Set of 8 Additional Magnetic Plates. 50 T-Pins • #60357 Ear Polypus, 5-1/2” • #84737 Tight Spot Scissor, 8”. Finishing System • #81742 Palette • #60416 Golden Eagle Paint Brush (#4, Flat).
#89639 Magnetic Gluing Jig Super Value Package #87891 Wood Ship Modeler’s Super Value Package #86791 Inkjet Decal-Making Super Value Package
Value $103.75 Super Buy $79.95 Value $227.70 Super Buy $149.95 Value $88.15 Super Buy $59.95**

16 • ORDER TOLL FREE 1-800-225-1066 *Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance. **Item ships by ground to 48 contiguous U.S. only.
 MICRO-MAKETM Follow us on POWER TOOLS

MicroLux® Mega Mini R8 Milling Machine

Multi-Saw Super Value Package
Everything you need to start your own mini machine shop
Super Value Package includes: #84630 MicroLux® High Precision Heavy Duty R8
Package Miniature Milling Machine with 1/2” drill chuck and drawbar, table locks,
column lock and drill stop, power supply with feedback-sensing power boost
circuitry, V-way chip guards, chuck/collet chip guard, indicator scales for the X
and Z directions, fine-adjust knob for the Z direction, safety cut-off switch,
wrench set and instruction manual/parts diagram.
#84692 Digital Speed Readout with magnetic base plugs into control panel;
displays spindle speed in RPM.
#87348 Super Duty Power Feed controls table speed from 0 to 20” per
minute in both directions to automatically power off motor at end of run.
#84700 ER Collet Set includes 3/64, 3/32, 1/8, 3/16, 7/32, 1/4, 5/16, 11/32,
3/8, 13/32, 7/16, 1/2, 17/32, 9/16 and 5/8 inch collets, plus wood case.
#82576 8-piece End Mill Set (Single End) includes eight center cut,
Perfect for hobbyists, jewelers, crafters and DIYers,
2-flute end mills: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 9/16 and 5/8 inch.
Multi-Saw is a power coping saw and scroll saw all in one!
Package includes: #87776 MicroLux® Variable Speed Multi-Saw • #81387 Easy- #82577 Quick-Lock Milling Vise bolts directly to top of milling table. Jaws
Mount Bench Bracket • #87607 “Big Book Of Scroll Saw Woodworking” • Plus 30 are 4” wide x 7/8” deep and open 3-1/8”. Overall height 2-5/8”.
premium saw blades: 10 each #80856, #80857 and #87937. #89255 Mega Mini R8 Milling Machine Super Value Package
#87947 MicroLux® Multi-Saw Super Value Package Value $2,589.75 Super Buy $2,299.95*
Value $259.70 Super Buy $209.95 #89255K Mega Mini R8 Milling Machine Accessory Value Package
#87947K MicroLux® Multi-Saw Accessory Value Package includes the bracket, If you already own the Mini R8 Milling Machine, you can still get all the
book and blades only. Value $109.75 Super Buy $79.95 accessories above for one great price! Value $989.70 Super Buy $899.95

MicroLux® Powered Chisel Fold-Up Spray Booth

Super Value Package Super Value Package

MicroLux® MINI
Rotary Tool Super Value Package
The thinnest rotary tool available in this power range. Create amazing carvings in a fraction 2 spray booths connect together
Package includes: #86698 MicroLux® MINI Rotary Tool • #15238 3-Jaw Keyless of the time it would take to carve by hand. to paint models up to 31” long,
Chuck • #86340 265-piece Accessory Set • #86676 10-piece Carbide Drill Bit Package includes: #86720 MicroLux® Powered Chisel • #86721 5-piece Carving then fold-up to save space.
Inch Set. Blade Set • #86727 Chisel Sharpening Stone. Package includes: TWO EACH #86104 Fold-Up Spray Booths • #86105 Spray
#87895 MicroLux® MINI Rotary Tool Super Value Package #87893 MicroLux® Powered Chisel Super Value Package Booth Exhaust Ducts with Window Vent • #86106 Spray Booth Filters (10 total).
Value $189.80 Super Buy $144.95 Value $192.95 Super Buy $169.95 #87898 Fold-Up Spray Booth Super Value Package
#87895K MicroLux® MINI Rotary Tool Accessory Value Package includes the chuck, #87893K Powered Chisel Accessory Value Package includes the carving blade set Value $355.70 Super Buy $269.45*
265-piece accessory set and drill bits from the set above, minus the rotary tool. and sharpening stone from the set above, without the powered chisel. Used individually, each spray booth is 16” wide x 13” high
Value $114.85 Super Buy $89.95 Value $62.90 Super Buy $49.95 x 15” deep; 16” wide x 8” high x 6” deep when folded.

MicroLux® MICRO Rotary Tool Unimat 6-in-1 MetalLine Modular Power Tool System
For superior performance, precision and practically limitless utility, there’s not
Super Value Package another mini tool system available that compares to the Unimat 6-in-1 MetalLine…
the ultimate modular power tool system! The Unimat is a professional-quality
production powerhouse, packing the functionality of a horizontal metal-turning
lathe, vertical milling/drilling machine, horizontal mill, center drilling machine,
benchtop and hand-held disk sander and hand drill into
one incredible system which takes up less than 18” of
workspace and weighs under 15 lbs.! Unimat is
the ideal tool system for model builders, miniature
crafters and all other makers for its compact size,
robust construction and exceptional features.
See our website for a full description
of features, specifications and capacities
of each tool configuration.
#88037 Unimat 6-in-1 MetalLine Modular
Step up to the most ergonomic rotary tool in the world. Power Tool System includes machine bed
Package includes: #86694 MicroLux® MICRO Rotary Tool • #86675 10-piece (271 mm + 140 mm), 12V motor, 12V safety
Metric High-Speed Steel Drill Bit Set • #60475 Micro Cutters, set of 4 • #87505 adapter, headstock, tailstock, 2 cross slides
6-piece Grinding Wheel Set • #84447 Diamond Bits, set of 2. (90 mm), longitudinal slide (200 mm), metal
#87894 MicroLux® MICRO Rotary Tool Super Value Package intermediate pieces, metal-3 jaw chuck, ten
Value $113.95 Super Buy $79.95 precision collets (1 mm to 6 mm), stabiliza-
#87894K MicroLux® MICRO Rotary Tool Accessory Value Package includes all the tion plates, steel face plate, stabilizing angle
bits, wheels and cutters from the set above, minus the rotary tool. and precision live center.
Value $58.80 Super Buy $34.95 List $899.00 . . . Our Price $749.95

See additional Super Value Packages throughout the catalog and at www.micromark.com

See our website for video *Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance. ORDER ONLINE www.micromark.com • 17
M I N I AT U R E P O W E R TO O L L I N E
These versatile German-made hobby
tools easily fit in the palm of your hand,
but don’t let their small size fool you.
They’re dependable and powerful enough
even for the most demanding hobby projects.

Micro-MakeTM
Digital Transformer
This latest evolution 15 amp maximum output transformer not only contains special
feedback circuitry that automatically boosts the power to the tool when it is under
load so that the speed remains constant, it now offers separate controls for speed and
torque. Switchable LED display shows the exact setting for each control for ultimate
precision. Compact unit includes 2 power output sockets and built-in cooling fan for
See our website for videos of these items in action longer run-time. Plugs into standard 110VAC household outlet.
#87365 Micro-MakeTM Digital Transformer. List $115.95 Price $69.95

Please note: The #87365 Transformer is REQUIRED for ALL Micro-Make TM Power Tools. The tools will not operate without it.

Micro-MakeTM Micro-MakeTM Micro-MakeTM

Palm-Size High Torque Gourd /
Belt Sander 1/4” Drill Cross Saw
Performs those tough sanding jobs with ease. Fabric- Generates 3 times the torque of previous models which, Our Cross Saw easily cuts through irregular, non-flat
backed belt rides on nylon rollers mounted in ball bearings. combined with its extra-low-speed capability, lets you objects, including gourds. The saw’s small, rounded shoe
Pressure pad is impregnated with graphite to prevent drill perfect holes in steel, brass and other metals without permits high maneuverability on both smooth and bumpy
friction and heat build up. Has 1” wide belt and 7/8” dia. overheating bits…and plastic won’t melt, because there’s surfaces and keeps the cutting line visible for increased
rollers. Includes one 120 grit belt and Allen wrench. virtually no friction heat build-up. Speed: 140 to 1,500 rpm; accuracy. Max. cutting thickness: 9/32”. Includes Allen
#15229 Palm-size Belt Sander $99.95 motor output: 110 watt peak; stall torque: 23 in-oz. wrench and 10 blades for soft woods and other craft items.
Palm-Size Belt Sander Accessories Includes 3-jaw keyless chuck with 1/64” to 1/4” capacity and #82088 Gourd / Cross Saw. List $89.95 Our Price $79.95
on/off trigger switch. Gourd / Cross Saw Accessories
Sanding Belts – $7.95 each
#82822 High Torque 1/4” Drill $79.95 #84563 Coarse Saw Blades (10) $8.95
#15239 80 grit #15240 120 grit
#60528 Benchtop Belt Sander Holder secures the tool #15244 Fine Saw Blades (10) $8.95
on its side so you can use the tool hands-free. $14.95 #15252 Diamond Grinding Blade for micro filing
and grinding most materials. $17.95

Use #15245
attachment
to turn your
Jigsaw into
a table saw!
Micro-MakeTM Micro-MakeTM
Powered Orbital Micro-MakeTM
Sander / Filer Sander Jig Saw / Scroll Saw
Weighing in at a mere 6 oz, this ergonomic detail tool Orbital Sander oscillates in a circular pattern, giving you Cuts intricate patterns and model parts in softwood, hard-
features a 360° pivoting head and rapid 5 mm (3/16”) smooth, scratch-free finishes. Use whenever you need a wood, plastic, fiberglass, thin plywood and non-ferrous
sanding/filing action. Includes 6 different heads that snap small, compact sanding tool. Now includes our new Hook- metal. Max. cutting thickness: 9/32”; speed: 1,800 to 6,900
onto the ball-joint mandrel at the end of the tool: 7/16” and and-Loop Sandpaper System, with 2 sheets of loop-backed rpm. Includes Allen wrench and 10 saw blades for wood.
11/16” circular, 3/4” and 1/2” triangular, 5/8” square and sandpaper and one PSA-backed hook sheet to be applied #15226 Jig Saw / Scroll Saw $69.95
3/16” x 1” rectangular, plus 2 sheets of 120 grit sandpaper to the tool’s sanding pad. Jig Saw / Scroll Saw Accessories
you trim to size for each sanding head. The tool also accepts #15225 Orbital Sander $74.95 #84563 Coarse Saw Blades (10) $8.95
smooth file shanks up to 1/8” diameter to a depth of 1-1/2”. Orbital Sander Accessories #15244 Fine Saw Blades (10) $8.95
#86844 Powered Sander / Filer $79.95 #88199 Hook-And-Loop Sandpaper, 10 sheets; 3 each #15252 Diamond Grinding Blade for micro filing and
Powered Sander / Filer Accessories 80 and 120 grit, 4 sheets 180 grit; aluminum oxide. $8.45 grinding most materials $17.95
#86845 Extra Sanding Heads and Sandpaper $14.95 #15248 Extra Sander Pad lets you keep different #15245 Stationary Table Attachment holds tool securely
#87190 12-piece Micro File Set $16.95 grits mounted and ready to use. $6.95 for hands-free use; saw turns on automatically. $11.95

18 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 Please note: The #87365 Transformer is REQUIRED for ALL Micro-Make TM Power Tools. The Next Generation
of Lighting is Here…
MicroBRYTETM by Micro-Mark
MicroBRYTETM puts brilliant, sharp-focused,
color-adjustable LED lighting wherever
you want it to go, no cords, no cables, no
boundaries! At less than 1” in diameter
and 12” long, this versatile light gives off
virtually zero heat and can be hand-held
or mounted to shine its 200 lumen beam
up, down and sideways. Includes a high-
capacity 3.7V rechargeable lithium-ion
Micro-MakeTM Micro-MakeTM battery built into its sturdy satin nickel
finished metal housing. Touch-control
Power Plane Sword Saw button activates the LEDs and allows the
Special spiral cutter works as well on balsa as it will on Twin blades slide back-and-forth next to each other at 100 user to switch between neutral white
hardwood or even Plexiglass! Easy-to-adjust knob lets to 2,000 strokes per minute. You can hold it like a pencil 4000K, cool “daylight” 6500K, and warm
you set depth of cut in an instant. Will plane material up and cut the most intricate patterns in balsa, basswood 3000K light; press and hold the button to
to 1” wide in one pass. A truly unique and versatile tool. and other soft materials up to 3/8” thick; pine up to 3/16” control the brightness from 2% to 100%.
Includes Allen wrench for cutter replacement. thick. Includes 1 pair of blades. Work for up to 10 continuous hours with
#15228 Power Plane $74.95 #81858 Sword Saw. List $89.95 Our Price $74.95 the dimmer at 50%, or up to 4 hours at
#15237 Extra Cutter for Power Plane $18.95 #81859 Extra Blades (2 pair) $7.95 100%; then use the included USB cable to
recharge. In 2 to 3 hours, you’re ready to
do it all again. Or, leave it plugged in and
Micro-Mark Tip: let the light shine on as long as you wish.
This is also the perfect
tool for cleaning and Complete set includes: MicroBRYTE light,
finishing gourds! 3’ USB cable, 1 removable magnetic mount,
1 screw, 1 mounting plate and 1 pre-cut,
double-sided 3M foam adhesive pad.

#89861 MicroBRYTETM
Micro-MakeTM by Micro-Mark
Heavy-Duty List $35.00
Micro-MakeTM Right Angle Our Price
$29.95
High Speed Disk Sander /
Drill / Grinder Drill*
The smallest and lightest drill/grinder available. It weighs A versatile tool for removing rust, grinding metal, shaping
just 5.4 oz. compared to the Dremel rotary tool at 16 oz. and smoothing wood, plastic and more, plus drilling holes*
It’s only 6-3/4” long and 5/8” in dia. at the working end, yet in places no other tool will go. Uses hook-and-loop sanding
powerful enough for the toughest modeling projects. disks. Speed: 400 to 3,300 rpm. Includes semi-rigid disk
5,600 to 21,000 rpm operating speed. Includes 3 precision mounting wheel for flat surfaces, hex wrench and 2 sanding
collets and wrench. disks. #82376 Sander/Drill. List $109.95 Our Price $99.95
#15230 Drill / Grinder. List $69.95 Our Price $59.95 Hook-and-Loop Sanding Disks (6/pkg.) $8.45/pkg. #88040 Mini
#15238 3-Jaw Keyless Chuck. Use in place of collets for #88196 60 grit #88197 120 grit #88198 240 grit Angled Precision Shear
quick change of bits. 1/64” to 1/8” capacity. $14.95 Disk Mounting Wheels (3/pkg.) $12.95/pkg. Ergonomically designed
#82378 For curved surfaces #82379 For flat surfaces shear is a pleasure to use while
*#15238 3-jaw Keyless Chuck; REQUIRED to convert sander slicing your way through all kinds
to drill. 1/64” – 1/8”. $14.95 of materials. Leaf spring action
takes the work out of manually
reopening the handles to perform
long line cutting. Super-sharp
blades cut plastic, leather, rubber,
wood veneers, paper, and even thin
sheet metal with minimal effort.
$14.95
Micro-MakeTM
Power
Screwdriver Cushioned
Ideal for slow-speed drilling as well as driving screws, this 3 rotating pendulum
powerful tool delivers 12.5 ft./lbs. of torque at speeds from wheels hug tight to
Sanders
240 to 2,500 rpm. Includes 1/64” to 1/4” capacity precision concave, convex and
chuck, no. 1 Phillips bit, hang-up hook and 44” cord. planed surfaces.
#82478 Power Screwdriver. List $89.95 Our Price $79.95
#82479 Phillips Bit Set (1 each #0 and #1) $9.95
#82480 Flat Blade Bit Set (1 each 1/8” and 5/32”) $9.95
Micro-MakeTM
More Micro-MakeTM Accessories 3D Contour
#15233 Auto Adapter Sander Cushioned Sanders are just the right size for smoothing
powers tools from contours with delicate control, gliding over rounded sur-
your car’s 12V port. Unique sander makes easy, clean work of the difficult task
faces instead of digging into them. Great for smoothing
$14.95 of shaping/finishing 3D objects. 3 rotating pendulum
lathe-turned workpieces to perfection. Hook-and-loop
#15234 Bare-End wheels, spinning from 100 to 1,500 rpm, hug tight to
fastening for quick disk swaps (disks sold separately).
Battery Adapter turns concave, convex and planed surfaces. From quick material
removal to fine finishing on all kinds of complex objects, #86926 #86925 #86924
any 12VDC power
this tool gets it done. Includes 1 set of 3 quick-change 1” Cushioned Sander; 1” Cushioned Sander; 2” Cushioned Sander;
source into a mobile
hook-and-loop-backed sanding disks. 1-9/16” diameter 1/8” Shank $11.95 1/4” Shank $11.95 1/4” Shank $12.95
power unit. $7.95
#15235 10 Foot disks sand a 3-3/8” path in a single pass. #86930 1” Abrasive #86931 1” Abrasive #86932 1” Abrasive
Extension Cord #87470 3D Contour Sander $129.95 Disks; 80 Grit $10.95 Disks; 120 Grit $10.95 Disks; 220 Grit $10.95
extends reach of the Hook-and-Loop Sanding Disks (9/pkg.) $9.95/pkg. #86927 2” Abrasive #86928 2” Abrasive #86929 2” Abrasive
above. $11.95 #87471 60 grit #87472 120 grit #87473 220 grit Disks; 80 Grit $10.95 Disks; 120 Grit $10.95 Disks; 220 Grit $10.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 19
 The MicroLux® Tilt Arbor Table Saw…the World’s Best Miniature Table Saw with the Features and Precision You Need

Scan this
code for
a unique
Augmented
Reality
experience!

#88865 Perma-Grit
Tungsten Carbide Abrasive Blade
Specially designed 3-1/4” diameter
abrasive blade adds even greater
versatility to our #80463 Tilt Arbor
Table Saw and #83418 Proxxon
Miter/Chop Saw, allowing you to
cleanly cut the widest variety of
materials with precision. Fine grit.
10 mm arbor; .097” kerf. $48.95

The MicroLux® Tilt Arbor Table Saw is more powerful, more accurate, and smoother running than any other saw
its size. And it’s the world’s first variable speed table saw…so it will cut metal and plastic, as well as wood. This is,
without a doubt, the most feature-packed machine ever designed for the precision craftsperson:
• High torque, electronically rectified 3,600 to 7,000 rpm variable speed • 11-1/2” x 9-1/2” table with 9-1/2” x 9-1/2” machined aluminum
DC motor produces more torque and power than many 1/2 hp motors… surface and two miter gauge slots
and torque remains high, even at low rpm; cuts plastic, aluminum, brass • Up-front controls for on/off, speed, blade height and tilt; includes
and non-ferrous metals without overheating vacuum cleaner attachment for dust control and table extension for
• Ball bearing spindle and no-slip timing belt for more torque cross-cutting long sheet stock
• Blade height adjusts from 0” to 1” and cuts a full 1” at 90°, 3/4” at 45°; • Compact size – only 10” long x 11-1/2” wide x 7” high;
tilting arbor for angle cuts up to 45° weighs approximately 11 lbs.
#80463 MicroLux® Tilt Arbor Table Saw includes self-aligning rip fence, calibrated miter gauge, blade guard
and 80 tooth fine cut blade for balsa and basswood up to 1” thick; hardwood up to 1/4” thick (for hardwood up
to 1”, use #86326 Carbide Blade). Uses 3-1/4” blades with 10 mm hole. Plugs into a standard household outlet.
This high-quality saw is made in Japan and backed by a 1 year warranty. List $537.95 . . . Our Price $349.95 GOT WOOD?
Visit the Micro-Mark
#81387 Easy-Mount Bench Bracket for Table Saw (mounts to tables up to 2” thick). $39.95
Lumber Yard on page 56

MicroLux® Tilt Arbor Table Saw Super Value Package

Take our best-selling saw, add some of our most popular accessories for it, and what do you get?
A versatile mini woodworking and metal-cutting workstation like no other.
Package includes:
• #80463 MicroLux® Tilt Arbor Table Saw
• #80898 Featherboard and Fence Set
• #86326 40 Tooth Carbide Blade
• #82593 Ferrous Cut-Off Disk
• #70224 Ripping Gauge Set
• #84904 Blank Blade Plates
• #60299 Angle Setter/Protractor
• #80605 Taper Jig
#87727
MicroLux® Tilt Arbor Saw
Super Value Package.
Value $529.60
Super Buy $399.95*
#87727K MicroLux® Tilt Arbor Saw
Accessory Value Package.
Includes 7 accessories from #87727,
minus the saw, for one great price.
#87727 Value $189.65 Super Buy $119.95

20 • ORDER TOLL FREE 1-800-225-1066 *Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance.
 MicroLux® Tilt Arbor Table Saw Accessories

Saw Blades and Accessories #82593 Aluminum oxide disk for ferrous
3-1/4” dia. with 10 mm hole unless otherwise noted materials like steel and cast iron. $12.95
#82594 Silicon carbide disk for non-ferrous
#80464 80 Tooth Standard Blade, .070”
materials like brass, aluminum, copper,
kerf. For softwood up to 1” and hardwood
bronze, zinc, white metal, etc. $12.95
up to 1/4” thick. $29.95
High Speed Steel Slitting Saws. 3” dia., 1/2”
#80465 24 Tooth Carbide Tip Blade, .070” hole. Must be used with adapter #83515,
kerf. For super-smooth cuts in all softwood, sold below. For slitting and slotting thin
plywood and hardwood up to 1” thick, wood and plywood; cross-cutting brass
plastic over 1/16” thick, plus thin soft brass tubing and soft brass sheet under 1/16”
and aluminum. $50.95 thick; cross cutting delicate wood and
#86326 40 Tooth Carbide Tip Blade, .070” plastic structural shapes. $25.95 each
kerf. For superior ultra-smooth cuts #80466 168 teeth, .045” kerf
(including rip cuts) in all softwood, #80803 168 teeth, .032” kerf #87355 MicroLux® Dado Cutting System #80467 The Accuriser II Rip stock to pre-
plywood and hardwood up to 1” thick and #80804 230 teeth, .025” kerf Specially designed washers mount behind cise tolerances with this vernier adjustable
plastic over 1/16” thick (not recommended #80805 230 teeth, .020” kerf the blade to create a controlled “wobble” rip fence. Self-aligning T-square design
for cutting metal). $50.95 which allows the blade to cut perfect includes positive lock that holds it per-
#83515 Adapter for blades 80466 – 80805.
1/16”, 3/32”, 1/8” and 3/16” dado slots every fectly parallel to the blade. The sliding face
#81524 Premium Quality Diamond Blade Reduces 1/2” blade hole to fit 10 mm shaft
time. Includes 4 color-coded dado washers, of the fence adjusts in .005” increments so
for tile, stone, etc. .040” kerf. $69.95 on MicroLux® Table Saw. $7.95
80-tooth saw blade (3-1/4” diameter, .070” your cuts will be more accurate than you
kerf ) and a special blade guard. $44.95 ever thought possible. Order today and
#88640 MicroLux® Tilt Arbor Table Saw Blade Super Value Package includes all 10
blades and adapter above for one unbeatable price. Value $337.45 Super Buy $299.95 #87355B Exact Replacement 80-tooth Saw experience the difference precise cuts can
Blade for Dado Cutting System $22.95 make. List $93.95 . . . Our Price $69.95

#84904 Blank Blade Plates The MicroLux®

Tilt Arbor Saw has a gap alongside the
blade which permits the blade to be tilted,
but also allows thin strips of wood to fall
#80898 Featherboard & Fence Set The #80468 Sliding Table Guides on the bot- #80605 Taper Jig Beautifully machined through the table. To eliminate the gap,
support provided by a high fence allows tom of the table slide in the grooves of the tool is used for making a wood or plastic install the blank plate and raise the blade
you to make cuts that are safer, easier and saw for precise cross cuts. The wide fence part with an angled cut on its long dimen- to cut a new slot. Now, thin strips of wood
more accurate. A high fence also allows gives your work more support for 90° cuts. sion. Adjusts easily to any taper. Made of will stay above the table. For MicroLux® Tilt
you to mount jigs and other attachments. The triangles we supply give you perfect machined aluminum and steel with a Arbor Saws with 5-3/8” long blade plates
Set includes 2” high x 10” long extruded 30°, 45° and 60° cuts without resetting the nylon handle. 6” long. $29.95 only. Set of 4 blank blade plates. $24.95
aluminum Rip Fence; Vertical Featherboard miter gauge each time you change the
to help prevent kick-back; Horizontal angle of cut. Recommended for cuts in #70224 Ripping Gauge Set (not shown) helps rip stock into strips quickly and accurately
Featherboard with flexible fingers holds material up to 1/2” thick. Table is 10” x 12”. to within .003”. Set includes 1/16”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8” and 1/2” gauges.
stock tight against rip fence. $39.95 Fence is 1-1/2” high. $29.95 For other widths, use 2 or more gauges in combination. All gauges approx. 4” long. $14.95

Introducing the Micro-Mark HD Tool Case

Our Mini Tilt Arbor Table Saw is renowned for its precision, capability, power and reliability.
And now, with the custom-fit Micro-Mark HD Tool Case, you can add true go-anywhere
portability to that impressive list of attributes. From your workbench to the jobsite and back
again, the Micro-Mark HD Tool Case assures that your saw gets there easily and safely in style.
Because the best deserves the best, we designed the Micro-Mark HD Tool Case from the
ground up, selecting only the toughest, premium-quality materials and assembling them with
a fit and finish typically reserved for high-end luggage. Features include a water-, scuff- and
tear-resistant heavy-gauge woven nylon outer cover with dual zipper closure, thick padded
top with impact-resistant inner core, 3/16” rigid, high-impact plastic interior shell with full
wrap-around, high-density foam lining.
Additional clever interior features include two large 6” x 5-1/2” x 2” deep storage pockets with
hook-and-loop closures for safely and securely holding extra blades, gauges, tape measures
and more, plus a 3” x 4” x 2” deep open-top pocket and hook-and-loop strap for holding rulers,
fences and other long accessories. Built-in carry handle and adjustable-length, over-the-shoulder
strap with thick shoulder pad and metal swivel connectors attaching to metal D-rings round
out this beautifully-made case. Interior dimensions are 12-1/4” x 11-1/2” x 8-1/2”; exterior
dimensions are 13” x 12-1/4” x 9”. While designed as an exact-fit for the Tilt Arbor Table Saw,
the Micro-Mark HD Tool Case can be used to transport and protect many other tools as well.
#89348 Micro-Mark HD Tool Case. $59.95

See our website for a video of this item in use 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 21
 POWER TOOLS
Proxxon Professional-Quality 10” Variable Speed Disk Sander
Proxxon Heavy Duty
Miter / Chop Saw Use Dry
Combines High Power or Wet!
with High Precision
#86794 #87344
Uses the same blades as the
MicroLux® Tilt Arbor Table Saw!
#80464 80 Tooth Standard Blade $29.95
#80465 24 Tooth Carbide Tip Blade $50.95
#86326 40 Tooth Carbide Tip Blade $50.95
#81524 Premium Diamond Blade $69.95
#82593 Aluminum Oxide Disk $12.95
#82594 Silicon Carbide Disk $12.95
High Speed Steel Slitting Saws $25.95 ea.
#80466 168 teeth, .045” kerf
#80803 168 teeth, .032” kerf
#80804 230 teeth, .025” kerf
#80805 230 teeth, .020” kerf
#83515 Adapter for blades 80466 – 80805.
Overall size: REQUIRED for use with #83418 saw $7.95
9” x 9” x 9”

The Proxxon Heavy Duty Miter/Chop Saw cuts and miters hobby materials precisely and For smoothing, polishing, deburring and beveling of hard and soft wood, non-ferrous
quickly. The rotating work table incorporates a beautifully machined vise which clamps the metal, steel, plastic (also plexiglas and fiberglass reinforced plastics), cork and rubber.
workpiece at the exact angle you need. Vise jaws have a V-groove to securely hold round Includes miter gauge and a silicon disk attachment which allows sanding disks to be easily
pieces, plus a top groove to hold thin stock. The blade is belt-driven at 4,000 rpm by a removed and replaced. Includes 2 each 80 and 240 grit aluminum oxide sanding disks.
smooth-running 1/4 hp DC motor. Cutting capacity is 1” at 90˚ and 3/4” at 45˚. The base High-quality, made in Germany. 2 year warranty.
rotates 45˚ in both directions from 0, with latching detents every 15˚ for quick and accurate #86794 Proxxon Professional-Quality 10” Variable Speed Disk Sander $359.95
setup. Includes 3-1/8” dia. carbide-tipped saw blade for cutting non-ferrous metals, wood 10” Aluminum Oxide Cloth-backed Self-adhesive Disks – $6.95 each
and plastic, plus finger-tip safety release, motor-start switch, automatic blade guard and
#80862 80 grit #80863 120 grit #80864 180 grit #80865 240 grit
adjustable stop plate for lengths up to 12”. Plugs into 120VAC wall socket.
#82212 Cooling Set for Proxxon 10” Sander includes reservoir, adjustable valve, tubing,
#83418 Proxxon Miter/Chop Saw. List $329.95 . . . Our Price $259.95*
gasket and collection tray for water-drip cooling of sandpaper and workpiece. Necessary
#87897 Proxxon Miter/Chop Saw Super Value Package includes saw plus when sanding hardened steel tools, stone, ceramics, tiles, glass and other hard, heat-
80 tooth standard blade, 40 tooth carbide blade and 2 cut-off disks. generating materials. Must be used with special waterproof sanding disks. $49.95
Value $365.75 Super Buy $319.95*
10” Silicon Carbide Waterproof Self-adhesive Disks – $6.95 each
#87897K Proxxon Miter/Chop Saw Accessory Value Package includes the 4 blades/cut-off
#82229 80 grit #82230 120 grit #82231 180 grit #82232 240 grit
disks in the set above, minus the saw. Value $105.80 Super Buy $59.95
#87344 Water-Cooled Sanding System includes: Proxxon 10” Disk Sander, Cooling
System, 240 Grit Sanding Disk and MicroFlow Coolant (#83340). List $475.00 $424.95
16” Benchtop Scroll Saw with Flexible Shaft Attachment
Beware of Powered Miter / Cut-Off Saw
cheap imitations!
for Wood, Metal, Plastic

Our Miter/Cut-Off
Saw cuts steel,
aluminum, brass,
wood and just
about everything
else in a fraction of
Overall size: the time it takes to
5” x 8” x 6” cut by hand. The
cuts are so smooth
and accurate, you
may never have to
file or sand cut
ends again!

Cuts rods, tubing, squares, miniature molding, brass and plastic shapes. Has a built-in
vise that adjusts for cuts from 45 to 90 degrees. 2” diameter blade cuts material 3/8”
thick x 1/2” wide x any length at 90˚ and 3/8” wide at 45˚. 110/120VAC, 7800 rpm
motor is encased in a high impact plastic housing. Base and vise are die cast
aluminum. Includes one fine-cut high speed steel saw blade for wood and plastic.
#84656 MicroLux® Mini Miter/Cut-Off Saw. List $75.00 . . . Our Price $49.95
See our website
#84657 Extra steel blade for above $14.95
for scroll saw blades
Reinforced Abrasive Cut-Off Wheels, .040” thick, package of 3
#84689 For Ferrous Metals $8.95 #84690 For Non-Ferrous Metals $9.95
Designed for the hobbyist with limited shop space, this well-made, versatile machine
combines a sturdy, variable-speed, full function scroll saw with a flexible shaft attachment
compatible with hundreds of Dremel-type accessories.
Features: 16” throat depth and metal frame • Cutting capacity: 2” at 0˚; 1” at 45˚• Variable #80243 Anti-Vibration Pad
speed: 550–1600 strokes per minute (saw); 1650 – 4800 RPM (flex shaft) • Tool-less blade holder reduces noise and vibration of benchtop
• Blade stroke: .593” • Uses 5” long pin-end or pin-less blades • Blade can be turned 90˚• Power- power tools including saws, sanders, air
take-off for 42” flex shaft (included) • Integrated flex-arm lamp • 10” x 16-1/4” cast-aluminum compressors and more. Cut to size with
table tilts up to 45˚ • Self-powered blower • Vacuum port • Overall dimensions: 15” high x 13” a scissor. 12” x 18”; 3/8” thick.
wide x 25” deep • Motor: 120V 60Hz, 1.2 amps • Weight: 32 lbs. • Includes starter set of blades, $14.95
blade holder, drill bit and wrenches. #84641 16” Scroll Saw. List $237.45 Our Price $224.95

22 • ORDER TOLL FREE 1-800-225-1066 *Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance. See our website for a video of this item
 Follow us on POWER TOOLS

Micro Power Our Micro Reciprocating Sander does in minutes what used to take hours...if you could
do it at all! And it works in places even your fingertip can’t fit. 8 different interchangeable
Sander Gives sanding shapes snap into the working end with just a twist. Works on wood, metal or
You Professional plastic. If you build models or miniatures, it’s the tool you’ve been waiting for! Set
Finishes with includes power sander, 8 tips (4 straight and 4 curved), and 60 self-stick sanding pads.
120VAC. 7-1/2” long overall. 7,000 strokes/minute. Made in Japan.
Little Effort #81266 Micro Power Sander. List $117.50 . . . Our Price $79.95
Extra Sanding Tips (set of 4) – $11.95 each 81266A Straight 81266B Curved
60 Replacement Sanding Pads
(15 of each shape) $6.95 each
#81279 #81280 #81281
Stroke: 2.5mm
180 grit 240 grit 400 grit
(3/32”) Sanding pad shapes shown actual size

Turn Your Shop into a Mini Lumber Mill Sands

Benchtop Mini
wood up to
Disk/Belt Sander 1/2” thick and
Our disk/belt sander is 5” wide
a rugged, solidly-built
tool that can save you
hours of hand sanding.
Beautifully designed,
with features found in
heavy duty
professional
woodworking
machinery.
Use for
shaping,
smoothing,
sharpening
and for trimming
parts precisely to
your marked line.
Can be used on all
woods, metals
and plastics.
Miter gauge and
calibrated disk tilt
table allow sanding
of compound shapes. Color may vary

Benchtop Mini Disk/Belt Sander Features:

• 5-3/4” round cast aluminum table tilts up to 60˚ for bevel sanding • Uses 1” wide x 30” long sanding belts
• Removable belt support platen for finishing intricate or curved work • Top pulley lets you sand inside curves
• Belt tracking and tension adjustment keeps belts on rollers and • 5” disk sander with a 7-1/4” x 4” cast
makes belt changes easy aluminum tilting table with miter gauge
• Heavy duty metal frame • Overall dimensions: 15” wide x
• 1/3 hp, 120VAC quiet-running induction motor 11” deep x 15-1/2” high
• Base is fitted with rubber feet for smoother, quieter operation • Weight approx. 16 lbs.
• Includes one sanding disk and one belt Weighted in-feed roller (non-powered) and Fine adjuster for fast, easy and 1-1/4” vacuum port on
• On/off rocker switch
table locks assure precise sanding. accurate thickness setting. back for dust removal.
• Outlets for attaching standard vacuum cleaner hoses
The MicroLux® Drum Thickness Sander is designed for serious hobbyists who need wood
#86174 Allwin Disk/Belt Sander. List $150.00 . . . Our Price $134.95* in sizes not available commercially. The rotating drum sands wood sheets and strips to
the exact size needed for your project, and can even be used to manufacture lumber
from resawn board or other sources.
Sanding Belts and Disks – $9.95 per package
#38103 80 grit (medium) belt (2) #38106 240 grit (ultra-fine) belt (2) “I needed about ten sheets of scribed sheet wood reduced from 1/16” to 1/32” thick. The drum
#38104 120 grit (fine) belt (2) #38109 80 grit (medium) disk (5) thickness sander was a trooper and buzzed through them in a few minutes. I used a micrometer
and the variation between boards and along each board was less than 0.003 inch. Bravo!”
#38105 180 grit (extra-fine) belt (2) #38110 120 grit (fine) disk (5)
– Wayne W., Tucson, AZ
Specifications
Long Lasting Nylon Mesh Abrasive Drum size: 2” diameter x 5-1/2” long Drive system: Multi-V-belt
A Belts for Cleaning and Buffing Capacity: Sands wood up to 1/2” thick
and 5” wide
Accuracy: Table is adjustable side-to-side
Nylon mesh belts impregnated with silicon carbide for uniform thickness
abrasive remove tarnish, rust and scale, and buff Motor: 1/3 horsepower, 120VAC Vacuum port: Located on rear…
rough surfaces to a smooth finish. The open pores Drum speed: 5800 rpm 1-1/4” diameter
B of the mesh work as a kind of “air conditioning” Sanding sleeves: Various grits available Overall size: 9” wide x 10” deep x 11” high
to carry off heat that would otherwise damage (see below) Weight: 33 lbs.
delicate finishes. Abrasive particles are embedded Machine construction: Cast iron Includes one 120 grit
throughout the mesh, so fresh abrasive is exposed and steel plate sanding sleeve
C as the belt wears, giving up to 10 times the life of
#83507 MicroLux® Drum Thickness Sander. List $639.95 . . . Our Price $399.95*
a standard sanding belt. Tap water washable. Fits
A. #85653 Fine Grit our disk/belt sander and other machines that use Extra Sanding Sleeves
B. #85654 Medium grit a 1” wide x 30” long belt. Sold in packs of 3 – $14.95/pack
C. #85655 Coarse grit $14.95 ea. 3 or more of any one grit $11.95 ea. #83508X3 #83556X3 #83543X3
120 grit 240 grit 320 grit

See our website for a video of this item *Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance. ORDER ONLINE www.micromark.com • 23
 NEW ITEMS POWER TOOLS
The MicroLux® Variable Speed Multi-Saw is a Turn Your Flex Shaft Machine*
Power Coping Saw And Scroll Saw…All In One! into a Reciprocating
Perfect for Hobbyists, Jewelers, Crafters and Do-It-Yourselfers! Carving Tool
After 25 years in production, one of the most popular Micro-Mark saws ever offered has
been re-engineered, making this already great saw better than ever!
Packed with these great features: Almost twice the stroke length – increased from .200”
to .375” (3/8”) • Integrated blower device provides a clean view of your sawing line • Elbow-
jointed overhead yoke arm provides easy, fast (45 seconds or less) re-positioning of material
being sawn; ideal for making complex interior cuts • Larger-size side compartment with
tool-less push-button removal mechanism • Easier blade installation for quicker
blade swaps • Improved vacuum port attachment design.
This is one of the few power saws in the world that can use coarser
coping saw-type blades and ultra-fine blades for the finest cuts
you’ve ever seen…re-designed and sized for hundreds of small This reciprocating chisel handpiece is for
projects. Cuts just about everything from balsa to pine, basswood, carving in all types of wood, plastic, plaster
cherry, walnut, mahogany and other exotic woods to light gauge, and soft carving stone. It connects to a key
non-ferrous materials…copper, brass, silver and other precious tip quick disconnect flexible shaft machine
metals, aluminum, and plastics. It will even cut styrofoam without like our #85288 (sold separately). Simply
shredding or tearing! pull the handpiece off of the cable (with
Made in Japan for Micro-Mark, Multi-Saw features a 90 watt (1/10 hp) the motor unplugged) and insert this
motor which runs on 110VAC household current. Variable speed: handpiece in its place. The handle converts
500 – 1,700 strokes per minute. Overall size: 12” high x 13-1/2” wide the rotary action of the driven cable into
(with vacuum adapter installed: 9-1/2” without adapter) x 19” deep. a reciprocating “hammer” type handpiece
Weight: 7 lbs. Table size: 6-1/4” x 6-1/4” cast aluminum with smoothly machined that requires a light pressure to start the
surface. Multi-Saw cuts soft woods up to 2” thick, hardwood up to 1/2” thick, circuit hammering chisel action. 6
long x 1

boards and non-ferrous metals up to 5/64” thick. diameter handpiece weighs only 4.6 oz
#87776 MicroLux® Multi-Saw includes 6 premium blades: 2 fine (#80856) and 2 medium blades and has a stroke length of 1/8
(3.2 mm).
(#87937) for wood, plastic and metals such as aluminum, brass, silver, gold, plus 2 coarse blades The textured plastic barrel and tapered
(#80857), primarily for wood cutting; adjustable rip fence; 0 – 90 o miter gauge; 2 C-style bench clamps for mounting the saw on work aluminum front end provide comfort and
surfaces up to 1-7/8” thick; assorted mounting screws; extra-long hex key and set-up instructions. List $229.95 . . . Our Price $149.95 zero hammering feedback into the user’s
hand. Includes six chisels with 18 mm-long
#87947 MicroLux® Multi-Saw Super Value Package Includes #87776 saw, #81387 Easy-Mount Bench Bracket, #87607 ”Big Book Of tangs and 55 mm and 75 mm overall
Scroll Saw Woodworking,” plus 30 premium saw blades (10 each #80856, #80857 and #87937). Value $259.70 Super Buy $209.95 lengths from cutting edge to end of tang:
#87947K MicroLux® Multi-Saw Accessory Value Package Includes everything in the Super Value Package above except the saw. 3/8” straight, 11/32” 45° skew, 1/4” V gouge
Value $109.75 Super Buy $79.95 and 3/8” wide #3, #7 and 3/16” #10 U
Premium-Quality Plain-End Saw Blades for MicroLux® Multi-Saw • 10 Blades Per Package • $14.95/package gouges, plus lube, wrench and instructions.
#80857 Premium Saw Blades for Wood; #87937 Premium Saw Blades for Wood, #80856 Premium Saw Blades for Wood, *Handpiece must be used in a forward motor direction tool,
17 tpi; .069” wide x .027” thick Plastic & Metal; 20 tpi; .040 wide x .016” thick Plastic & Metal; 40 tpi; .045 wide x .020” thick such as our #85288 Flex Shaft Machine, which spins the
handpiece chuck counter-clockwise.
#90118 Reciprocating Carving Handpiece
MicroLux® Miniature Table Saw List $86.32 . . . Our Price $76.95
is Ideal for Ultra-Miniature Sizes
Designed specifically for rip-cutting narrow strips from sheet stock Foot Pedal and Table Top
and for cross-cutting to close tolerances, the MicroLux® Mini Table Switches for Hands-Free
Saw will even cut plastic, thin non-ferrous metals and printed
circuit board with our optional fine-tooth blades. Control of Your Power Tools
Features include: Pivoting action clear blade guard for better
visibility • Tool-less dust compartment door latch • Adjustable,
angled vacuum port attachment • Built-in sliding scale on the
table top for precise cuts • Wide-body, self-aligning rip fence
with undercut clamp for more secure positioning.
#87775 MicroLux® Miniature Table Saw
Includes sturdy 6-1/4” x 6-1/4” stationary aluminum table, adjustable
rip fence, 0–90 o miter gauge, blade guard, dust catcher compartment, benchtop
mounting holes, up-front on/off switch, standard blade (#50320, 2” dia. with 10 mm hole
#80766
and 80 teeth), 3600 rpm, 1/10 hp, 110VAC motor with belt drive and 6’ cord. Fixed-position 2” blade.
On / Off
Overall size: 9-1/2” wide x 7-1/4” deep x 4” high. Weight: 4 lbs. High-quality, made in Japan for Micro-Mark.
List $239.95 . . . Our Price $129.95
#87775K MicroLux® Mini Table Saw Super Value Package Includes #87775 saw, #15220 and #86619 saw blades, and #82147 Mini
Square. Value $275.00 Super Buy $169.95
#50320 Standard Saw Blade, 80 teeth, .040” kerf. For soft wood up to 3/8”; hard wood up to 3/16”. $34.95
#15220 Fine Saw Blade, 100 teeth, .020” kerf. Produces extra smooth cross cuts (not for ripping). Cuts thin woods and non-ferrous soft
metals up to 1/32”; plastic up to 3/32”. $32.95
#86619 Carbide-Tipped Saw Blade, 20 teeth, produces a thin .043” kerf. Long-lasting, razor-sharp blade makes fast, smooth cuts in soft
and hard woods – even plywood – up to 3/16” thick; PCB up to 3/64” and plastic up to 1/8”. $34.95
#81387 Easy-Mount Bench Bracket Custom-fit bracket includes hardware and instructions for securely mounting saws #80463, #88343
#87775 and #87776 to work tables up to 2” thick. Foam pads protect table surface. $39.95 Variable Speed

#80766 This high quality industrial foot

#84446 Powered Detail Engraver lets you carve and engrave the finest details in metal, wood, switch is ideal for use with scroll saws, disk
plastic and glass. And, because it’s so lightweight (just 2 ounces), you’ll have more control sanders, drill presses, airbrush compressors,
than you ever thought possible. Beautifully finished machined etc. Press pedal for ”on,” release for ”off.”
aluminum barrel includes finger-tip on/off push button switch; Has no-slip rubber pads on both sides. 10
holds two AAA cells (included) for cordless power. Set-screw- amp capacity. 6’ cord. List $64.95 $29.95
type 3/32” chuck holds miniature diamond engraving bit
(also included). Packed in a handsome molded case. #88343 Table-top speed control for power
List $27.05 . . . Our Price $19.95 tools lets you dial in the desired speed to
#84447 Diamond bits, 3/32” shank (pkg. of 2) $8.95 suit the project at hand. 5” long x 5-7/8”
wide; 2-3/4” high. 3 amps max. $99.95

24 • ORDER TOLL FREE 1-800-225-1066 • OUTSIDE USA CALL 1-908-464-2984 See our website for a video of this item in use
 Follow us on HAND TOOLS POWER TOOLS
MicroLux® Mini and Micro Rotary Tools Bring Precision #86694
Carving, Shaping, Sanding and Grinding to the Next Level
#86694 MicroLux® Micro Rotary Tool is the most ergonomic hand-held rotary tool we’ve ever used. At
just over 6 oz, it is extremely lightweight and perfectly balanced. Attachment of the 110V power cord to
the side of the unit eliminates the awkward, top-heavy feel of other hand-held rotary tools and allows
for more precise movements and amazing control. Speed is variable from 7,000 to 16,500 rpm; 20 watts;
50/50 duty cycle. Includes 8 accessories: 2 diamond bits, 2 steel cutters, 3 stone bits, 1 felt-tipped bit, plus
collet nut wrench and storage case. Other 3/32” shank bits available separately. Made in Japan. $59.95
#86675 10-piece Metric High-Speed Steel Drill #86811 12-piece Metric Drill Set Polished steel
Bit Set 3/32” shank is a perfect fit with our twist drills with uniform 3/32” shanks are a perfect
#86698
MicroLux® Micro Rotary Tool. Includes sizes: 0.7, 0.8, fit with our MicroLux® Micro Rotary Tool. Includes
0.9, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2 mm, plus sturdy 12 popular sizes from .45 mm to 1.55 mm in .10 mm
storage box. Max. rpm: 18,000. $29.95 increments. $29.95
#86698 MicroLux® Mini Rotary Tool 35 watts of power and a variable operating speed between 8,000
and 18,000 rpm make the MicroLux® Mini Rotary tool strong enough for the most challenging projects.
A total weight of just 8 oz and the thinnest design available in this power range (3/4” at the tip and
1-5/16” along the barrel) make for one of the most ergonomic high-powered rotary tools in the world.
Includes collet set (1/32”, 3/32” and 1/8”) and wrench. Uses a wide variety of standard rotary tool bits and
accessories. See website for details. 110V; 50/50 duty cycle. Made in Japan. $79.95

4300 Platinum Tool Set is a Complete Workshop in a Box

#87831 Dremel 4300 Platinum Rotary Tool Set Since inventing the high-speed rotary tool in 1934,
Dremel has continued serving makers with its full line of versatile, easy-to-use tool systems that
deliver the perfect solution for almost any job. Billed as Dremel’s ”most versatile rotary tool,” the
4300 is a bold next step in that evolution, as it’s the first model designed to be fully compatible with
ALL dremel accessories regardless of size. Leading the way to innovation is a new universal 3-jaw
chuck for quick and easy tool-free accessory changes, an all-new adjustable pivot light to provide
illumination even in the most difficult-to-reach angles and spaces, plus their most powerful motor
ever with built-in variable speed (5,000 to 35,000 rpm) and electronic feedback circuitry. This amazing
Platinum Edition Set offers a superior value, with 8 great attachments including the ever-popular
Flex Shaft, plus 64 Dremel accessories. The beautiful ultra-large storage case is worth the price of
admission alone, with metal latches,reinforced corners and foam-lined drawer with stay-closed glide
system. List $299.99 . . . Our Price $219.95
#87832 Dremel 4300 Standard Rotary Tool Set includes the Model 4300 tool described
above, plus 5 attachments, 40 accessories and deluxe molded plastic storage/carry case.
Super Buy $125.95

Ultra-Saw Mini Circular Saw The Dremel

Tool Kit 4300 Platinum
Tool Set Makes
an Excellent Gift!

Stylo+ Craft Tool

#89030 Dremel Stylo+ Craft Tool Set The Stylo+ offers the
precision you expect from a Dremel rotary tool, packaged
into a sleek, light-weight design. Crafted with the
comfortable ergonomics of a pen, the narrow profile
and soft grip of Stylo+ allow creative users to etch,
engrave, polish and sand with ease at speeds
from 5,000 to 22,000 rpm. Set includes Stylo+
#90152 Dremel US40-04 Ultra-Saw Tool Kit With a strong 7.5-amp motor and durable rotary tool, 15 accessories for engraving,
drive train operating at 13,000 rpm, Ultra-Saw has the power and speed to take on a wide carving, cleaning, polishing, sanding and
variety of jobs lighter-weight tools just can’t handle. 3.5” and 4” wheels provide fast cutting more, plus a two-year manufacturer’s
speeds and improved performance in a wide variety of materials. A metal foot and guard warranty. List $88.62 Super Buy $59.99
resists the heat generated by heavy-duty jobs like grinding and cutting metal. Plus, with
Dremel’s exclusive accessories, Ultra-Saw offers the added ability to perform surface #90151 Dremel US700 Ultra-Saw 6-piece
preparation tasks like removing paint, rust, and thin-set mortar. Set includes corded 120V Cutting Kit includes one tile diamond wheel,
Ultra-Saw tool, 3 cutting wheels: wood, wood flush cut and metal, and auxiliary handle. two wood and plastic carbide wheels, and three
Super Buy $135.95 See additional blades at right metal cut-off wheels, plus info/use guide. $39.95

#89218 Dremel Lite 4V Cordless Multi-Purpose Rotary Tool Kit

The combination of ergonomic design, Lithium-Ion battery
technology, and reliable motor makes the Dremel Lite
beginner-friendly, ideal for precise work and great for a
#86047 #85304 wide variety of tasks. Integrated EZ Twist nose cap
6-piece HSS Saw Dremel Right Angle makes accessory changes tool-less, fast and easy.
Blade Set with Mandrel Drive Attachment Convenient slide switch controls speed. Includes
attaches in seconds 10-piece accessory assortment with storage
Use with your rotary tool to slice through to Dremel rotary tools. box. Compatible with all Dremel rotary
soft woods with ease. Rated for use up to It will drill, cut, sand tool accessories. Super Buy $54.99
20,000 rpm, these small-size blades provide and grind in places
big cutting power in places larger saws you never could before.
can’t fit. Set includes 1 each: 23 mm x 60 Quick connect system
teeth, 25 mm x 36 teeth, 33 mm x 36 teeth, easily attaches to your
35 mm x 36 teeth, and 44 mm x 72 teeth, rotary tool in place of
plus one heavy duty mandrel with 3 mm the housing cap, no
shank; 2” long overall. $15.95 wrenches required. $33.95

See our website for a video of this item in use 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 25
 POWER TOOLS

Rotary Tools, Attachments & Accessories See our website for complete descriptions and more Dremel items

4300-5/40 Rotary Tool Set Rotary Tool Hobby Set 8220 Cordless
This feature-packed Maximum versatility and constant 120V power make this Dremel’s most powerful cordless rotary tool
tool includes a rotary tool the standard by which all others are measured offers unmatched performance and versatility with
comprehensive set superior 12V MAX batteries
of accessories for the
widest variety of
applications

Includes
carrying case and
two Lithium-Ion battery packs

#87832 Dremel 4300-5/40 Rotary Tool Set includes #85177 Dremel Hobby Set (model 3000-1/24) #85515 Dremel 8220-2/28 Rotary Tool Set includes
120VAC corded Model 4300 high performance rotary includes 120VAC corded Model 3000 rotary tool Cordless rotary tool with 2 high-capacity 12VMAX Lithium-
tool • 5,000 to 35,000 rpm speed control • Universal 3-jaw • 5,000 to 32,000 rpm speed control • EZ TwistTM nose Ion batteries • 5,000 to 30,000 rpm speed control • EZ
chuck for fast, tool-less accessory swaps • Pivot Light cap for fast accessory changes • Sanding/grinding guide Twist nose cap for fast accessory changes • Comfort grip
• Shield • Sanding/grinding guide • Saw cutting guide • Starter selection of accessories • Accessory organizer housing • Battery fuel gauge • 1-hour battery charger
• Garden tool sharpener • 40 accessories • Accessory case • Guide book and storage case. • 2-year warranty • Cutting guide • 28 accessories
organizer case • Rugged carry case. Super Buy $125.95 List $144.95 . . . Our Price $89.95 • Carrying case. List $246.80 . . . Our Price $149.95

265-piece 18 D H J K L M N
Accessory Set each
for Rotary Tools
2x 2x 6x
E
6 each
P
36x 30x 36x

2x F

G
2x 4x
You’ll be impressed with this most-complete selection of accessories that fit any
rotary tool with a 1/8” collet or chuck. Includes sanders, grinders, drill bits, buffers,
polishing cream, diamond bits, brushes and cut-off wheels…265 pieces in all!…
everything you need to put your Dremel or other rotary tool to good use.
#86340 265-piece Rotary Tool Accessory Set. Value $126.50 . . . Our Price $59.95
D.– F. Diamond Coated Micro Burrs grind, engrave, smooth, shape and sharpen almost
everything. 1/8” shanks. Each set includes a plastic storage case.
A B C D. #80919 Standard Set 20 different shapes; cutting diameters up to 1/8” $16.45
E. #82260 Expanded Set 30 different shapes; cutting diameters up to 3/16” $25.45
F. #86573 Jumbo Set 10 different shapes; cutting diameters up to 5/16” $17.45

G. #80470 10-piece Titanium Coated High Speed Steel Cutter Set includes all shapes
shown. Use for shaping, cutting and hollowing soft brass, wood and plastic. 1/8” shank.
Value $64.05 . . . Our Price $45.95

A. #87505 6-Piece Grinding Wheel Set includes one each coarse, medium and fine grit. H. – N. Solid Carbide Cutters last up to 20 times longer than steel. 1/8” shanks. Use to
Approx. 7/8” in diameter by 7/64” thick; included mandrels have 3/32” shanks. $9.95 shape all materials except hard steel. $14.95 ea.
B. Mini Saw Blades cut wood, soft metals, plastic, fiberglass. Precision ground tools of Item # Diameter Item # Diameter Item # Diameter
drop forged, tempered high carbon steel. All are .015” thick with 1/8” hole. H. 60672 1/4” K. 60676 1/4” M. 38185 1/8”
#14133 3/4” dia., 36 teeth $13.95 #14137 2” dia., 140 teeth $24.95 J. 60674 1/4” L. 60677 1/4” N. 60679 1/16”
#14134 3/4” dia., 60 teeth $13.95 #14138X2 1/8” shank mandrel (2) $7.95
#14135 1” dia., 68 teeth $13.95 P. #12101 14-piece Drum Sander Set Get professional results in wood or metal with
BUY THE SET AND SAVE! these hard-to-find tools. Abrasive band slips over rubber drum; tightening the screw or
#14136 1” dia., 34 teeth $14.95 #81043 Saw and mandrel set. Includes nut on arbor expands the drum to hold band securely in place. 1/8” shank fits rotary tools,
#80324 1-1/2” dia., 100 teeth $19.95 1 each of the above. $94.95 flex shafts and drill presses. $14.95 See our website for sanding band refills.
C. Tungsten Carbide Sanding Bands won’t load up, break down, or overheat. Use on
wood, fiberglass and plastic. Bands are 1/2” dia. x 1/2” long. Q. #83165 Radial Bristle Disk Set Embedded with 3M CubitronTM and aluminum oxide
grains, these radial bristle disks clean, deburr, sand and polish hard-to-reach intricate or
#14463 Coarse Grit Band $7.95 #14563 Drum, 1/8” Shank $3.95 flat areas on wood, metal, plastic or ceramics. 38-piece set includes 3/4” diameter disks
#14464 Fine Grit Band $7.95 #50292 SAVE! Set of all three $17.95 in 80, 220, 400, 6 micron and 1 micron grits, plus pumice grit and 2 mandrels. $56.95

26 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 Follow us on POWER TOOLS

Versatile 100-piece Accessory T Workstation

MicroLux® Heavy Duty
Set is an Amazing Value! • Workstation combines a drill
press, rotary tool holder and Flex Shaft Machine
flex shaft machine in one Designed and engineered for #85288
space-saving attachment. professional and serious craftsmen.
• Headstock rotates for angle Gives you much more power than
drilling; holds rotary tool at standard rotary tools and other
U angle for sanding and shaping. flexible shaft machines. Includes
pendant-style 1/4 horsepower ball
• 6” square metal work surface,
bearing motor with metal housing;
4” throat, 6” clearance under
electronic foot pedal to control speed
collet, slotted table.
from 500 to 22,000 rpm; #30 style
• Column extends to 29” high ball-bearing handpiece with 5/32”
for flex shaft use. (4 mm) capacity key-type chuck; and
1/8” and • Includes calibrated depth stop durable 40” long flexible shaft. 56” long
3/32” shanks
and storage system for line cord plugs into 120VAC wall socket.
Includes an assortment of cutters, grinding accessories. #85288 MicroLux® Flex Shaft Machine
stones, brushes, mandrels, sanding drums, See our website for a rotary tool List $169.95 . . . Our Price $84.95
cut-off wheels, reinforced abrasive disks, compatibility chart
sanding bands, buffing tips, wheels and T. #83453 Dremel Workstation Flex Shaft Stand
more, all contained in a finished wooden List $61.06 . . . Our Price $47.95
organizer/storage case. A great value! • Adjusts from 24” to 45” high.
#83097 100-piece Accessory Set • Bolts to any work table.
Dremel Rotary Tool, #82546 Quick-Jaw Vise and
Value $69.45 . . . Our Price $19.95 #83239 Drill Bit Set are shown attached #85143 Flex Shaft Stand #85143 Stand
but are not included. $38.50 sold separately.
Emery Cutting Wheels V

U. #83239 Workstation
Drill Bit Set includes 1/32,
3/64, 1/16, 5/64, 3/32, 7/64 and
For cutting off metal rods, tubes, music 1/8 inch drill bits, plus plastic index. $9.95
wire and other hardened steel. 15/16” dia.
#38249X2 72 pieces/pkg. $9.95/pkg. V. #82546 Quick-Jaw Vise Spring action spindle latch holds Includes motor,
#14142X2 Mandrels for above (2) $4.95 work tightly or releases in an instant. Jaws are 2-3/4” wide x 1” 40” flexible shaft,
deep. One jaw has horizontal “V” grooves to hold round stock. foot pedal, handpiece
2-1/4” capacity. $29.95 and chuck key
Carbide Router Drills & Bits
R S #84611X2 Diamond Cut-Off Wheel Convert your Rotary Tool into a
with Mandrel Large 1-5/8” diameter
80 grit diamond-coated cut-off wheel Flexible Shaft Machine
slices through hard materials quickly • Screws directly to end of rotary tool.
and easily. Includes special 1/8” shank • Provides fingertip control.
mandrel for use with all brands of • 36” long with 1/2” dia.
rotary tools and flex shafts, plus foam- ball-bearing handpiece.
lined storage case. 2-pack. $14.95 See our website for a rotary
tool compatibility chart
R. Carbide Router Drills These unique
tools let you cut any shape in wood, High #50352 Dremel Flexible Shaft
List $43.12 . . . Our Price $34.95
plastic, glass, ceramic, aluminum, brass, Speed
fiberglass and almost any material except
hard steel. Use for enlarging and shaping
Steel Protect Yourself Tool and saw not included.
holes, scroll cutting, smoothing. Cuts its Micro Heavy duty screw-on
own starting hole and any shape in any Cutters plastic shield provides a
direction tool is moved. 1/8” shank fits in clear view of your work
$9.95/set
any rotary tool. Made of solid carbide for while protecting you
#60474 #60475 #60476
30 times longer life than steel. from sparks and other
These small high speed steel engraving cutters are ideal for power
#60717 1/16” Cutting Diameter $13.95 debris while cutting,
engraving intricate details in wood, fiber, plastic and soft metals.
#60718 3/32” Cutting Diameter $13.95 grinding, etc.
3/32” shanks fit Dremel and other high speed rotary tools. Sets of 4.
#60719 1/8” Cutting Diameter $13.95 #87404 Rotary Tool Shield
#60474 Approx. #60475 Approx. #60476 Approx. $11.45
#60795 Set of all 3 Router Drills $38.95 1/32” dia. head 3/64” dia. head 1/16” dia. head
S. Fish Tail Carbide Router Bits cut Bits and
Rotary Tool Chucks Make Bit Changes Easy A New Spin on tools not
smooth, flat bottom holes in wood, hard
plastic and fiberglass. 1/8” shanks make #15264 Rotary Tool Bit Holders included.
Universal 3-jaw Chuck Color may
them ideal for use in the Dremel router or vary.
shaper attachment (available separately). 1/8” shank fits all brands.
Can also be used in a drill press. Diamond 1/64” to 1/8” capacity. Our rotary bit holder has 114
pattern milled into side lets you smooth or $19.95 1/8” dia. holes that neatly
shape edges of thin wood. 1-1/2” long. #60301 store your tool bits in full view
#80245 1/32” Cutting Diameter $13.95 Micro Drill Chuck for easy identification. Ball-
1/8” shank. #61 (.039”) to bearing base lets you quickly
#80246 1/16” Cutting Diameter $13.95
#80 (.0135”) capacity. spin to the tool bit you need.
#80247 3/32” Cutting Diameter $13.95 Closes to 0. #84285 Rotary Bit Holder
#80248 1/8” Cutting Diameter $13.95 $9.95 List $21.60
#80254 Set of all 4 Fish Tail Bits $39.95 #15264 #60301 Use above chucks up to 10,000 rpm. Our Price $17.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 27
 NEW ITEMS POWER TOOLS HAND TOOLS
#90464 Crafting with Digital Cutting Machines, by Libby Ashcraft
Whether you’re in the market to buy a digital cutting machine or looking for guidance
and inspiration for the machine you recently purchased, this complete how-to
manual is here to help! With overviews on the top three brands – Silhouette,
Cricut, and Brother – clear instructions for foolproof preparation and cutting a
variety of materials, technique tutorials, handy hacks, and 6 unique step-by-step
fabric-based projects, Crafting with Digital Cutting Machines will help you make
the most of your machine!
From appliqué and making cards to transferring designs, cutting vinyl and leather,
and so much more, digital cutting machines are revolutionizing how people craft!
Whether you’re a paper crafter, sewist, quilter, scrapbooker, designer, teacher, or
other type of artist or crafter, you’ll love your digital cutting machine for all its
amazing capabilities. $14.99

Model High-Precision Miniature

makers and Digital Level Measures Exact Angles
airbrush artists take note:
this is an amazing tool for cutting
of Machine Tool Set Ups
paint masks in a fraction of the time and with Carpenter levels are just too large and inaccurate for
greater accuracy than you ever could by hand! And machine set-up. So, we encased our high precision
Cosplayers, you will find this an invaluable tool for prototyping, digital level in a compact housing that’s only 2” square
making patterns and creating costume parts more easily than ever before! by 1” deep. At the press of a button, the large LCD
reads the relative angle between machine surfaces
Meet the Go-Anywhere Silhouette Portrait® 3 or the percent grade from sea level. Magnets embed-
The Silhouette Portrait® 3 is the smallest desktop cutting machine Silhouette has to offer. ded in the housing attach it securely to cast-iron/steel
It’s perfect for cutting materials up to 8” wide and up to 60 feet long. The Portrait is ideal surfaces for hands-free measurement. Range: 0 to
for cutting any letter and A4-sized material, including paper, cardstock and sticker sheets, 45˚/100%. Readability: 0.05˚/0.01%. Hold button
as well as longer rolls of material, such as vinyl or heat transfer. Model makers and airbrush remembers last reading. Housing made from durable
artists take note: this is an amazing tool for cutting paint masks in a fraction of the time CNC-machined, satin-finish alloy. Includes 9V battery
and with greater accuracy than you ever could by hand! And Cosplayers, you will find this and auto shut-off battery saver.
an invaluable tool for prototyping, making patterns and even creating costume parts #84519 Digital Level. List $64.95 . . . Our Price $49.95
quickly and more easily than ever before. The applications are unlimited! The Portrait 3
was built with ease-of-use and portability in mind. Small machine, big possibilities! Indicators Locate Drill and Mill Chucks Exactly On Center
The Portrait 3 works with the new AutoBlade and can create pop-out cuts on paper materials. Never drill off-center holes again! Our
It can also cut from rolls of material that are 9” wide, with a maximum cutting area of up Center Finders quickly and easily posi-
to 8” wide and 60 feet long. The Portrait 3 can register Print & Cut designs on materials tion drill press and mill chucks directly
like cardstock, printable vinyl and heat transfer, making it really easy to cut above the exact center of a round work-
around prints. You can take this machine anywhere you go and create perfect OFF ON piece. Indicator amplifies the slightest
CENTER CENTER
cuts using the new Silhouette Go™ mobile app. misalignment so you can adjust before
#89617 Silhouette Portrait® 3 Portable Electronic Cutting Tool drilling. Choose size below.
Super Buy $199.99* See Our Website for Genuine Silhouette Accessories and Materials #89326 Mini Center Finder,
1/4” dia. x 7/8” long shank. $11.95
#89618 Silhouette Autoblade, Generation 2 for cutting paper, card stock,
sticker sheets, heat transfer materials, vinyl and select specialty materials.
Fits MicroLux® Drill Presses!
Compatible with Cameo 4 and Portrait 3 only. Super Buy $12.99 #82281 Center Finder,
3/8” dia. x 1-1/2” long shank.
#86720 MicroLux® Powered Chisel Hammer-like reciprocating action List $17.95 . . . Our Price $14.95
activates automatically, providing incredible cutting power. Includes 3
blades: 9 mm #1 flat chisel, 6.4 mm 90˚ V parting chisel and 9 mm #9
sweep gouge, plus collet wrench. 110V; 50/50 Duty Cycle. High Variable Speed Mini Bench
quality, Made in Japan. List $165.86 . . . Our Price $129.95 Grinder with Flex Shaft
See page 17 for MicroLux® Powered Chisel Super Value Packages!
Super-Sharp, Bi-Metal Chisel Blades
List $16.95 each . . . Our Price $11.95 each
#86722 14 mm #7 Sweep Gouge
#86723 7 mm (60˚) V Parting Tool
#86724 16 mm #1 Flat Rounded Chisel
#86725 7 mm (90˚) V Parting Tool Like most grinding
#86726 Special Offer! machines, ours will shape,
Set of 4 Chisel Blades above smooth and deburr metal.
for one low price. Only $39.95 It will also sharpen
#86721 Set of 5 Chisel Blades includes 9 mm #1 rounded flat chisel, 6 mm #9 sweep cutting tools and
gouge, 9 mm #1 flat chisel**, 6.4 mm 90˚ V parting chisel**, 9 mm #9 sweep gouge**. renew the edges
$37.95 **Included with Chisel on screwdrivers, pliers,
tweezers, scribers and
#86727 Chisel Blade Sharpening Stone Approx. 4” x 2-1/2” x 5/8”. $24.95 hundreds of other items. Unlike
other grinders, ours includes a unique wheel
made of woven fibers impregnated with abrasive
grains. So, it will remove rust, paint and tarnish
from most metals as well. The variable
speed control, another unique
#86566 Wet / Dry
feature, lets you do intricate shaping
Utility Sharpener
of miniature parts. And, it includes a detachable 42” long flexible shaft with
spins at a slow
ergonomic handpiece and 1/8” collet to hold accessories that grind, buff, sand, drill
170 rpm through
and saw metal, wood and plastic. The all-metal motor housing with rubber feet
a water bath which
includes a repositionable protective face shield. Overall size: 5” x 6” x 7”. Wheels are
washes away ground
3” diameter x 3/4” wide with 10 mm hole. Variable speed: 0 to 10,000 rpm. Weighs
particles and prevents
just 6-1/2 pounds. 110VAC motor with 5’ cord.
overheating. Twin tool
rests and reversible motor #85287 Miniature Bench Grinder. List $100.00 . . . Our Price $74.95
accommodate a wide range of Order Extra Wheels Below – $9.95 each
grinding angles. 120VAC. Wheel size: #85919 3” Grinding Wheel, 120 Grit #60736 3” Woven Abrasive Wheel
5-1/2” diameter x 1-1/2” wide; 120 grit. $99.95

28 • ORDER TOLL FREE 1-800-225-1066 *Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance. See our website for a video of this item in use
 Follow us on POWER TOOLS NEW CONTEST!

How to Turn Your Idea into a Successful Product

For Makers, Hobbyists, and Crafters
How to Turn Your Idea into a Successful Product is for anyone who ever had a suggestion
or thought about a product invention or improvement. Almost everyone has had a similar
Model Challenge
Build a wooden model of any vessel
notion. This book provides a guide and options to consider to take that idea to fruition.
The steps provided will make the process more efficient and cost less money. Dr. Chas in any scale and make it your own
Fox, the CEO of Micro-Mark, has introduced over 1000 successful products in his career. Your contest entry should display solid modeling skills, creativity
Micro-Mark is known for the many innovative products launched over many years. This and attention to detail, and must be constructed primarily of
book describes the product development process, how to get a design, how to protect wood. In order to qualify, submit your contest entry by the June
your idea, and market research. It also provides considerations for manufacturing, testing, 1, 2022 deadline. SEE OFFICIAL RULES ON OUR WEBSITE.
certifications, packaging, and customer service. Many ideas never happen because The Grand Prize Winner will receive a $1,000.00 Gift Certificate
many don’t know the required steps to make the transition from concept to a real product. redeemable at Micro-Mark, and a custom recognition plaque.
You can do it yourself with the information in the book. Do it on your own, or learn how For contest rules, and to submit your entries, go
to work directly with Micro-Mark to reap the rewards of innovation. to micromark.com/Modeler-Of-The-Year-2023,
#90055 How to Turn Your Idea into a Successful Product $9.95 or, type MOY2023 into the search field.

Precision-Engineered Proxxon Tools are World-Renowned for Quality Construction and Value A
#88512 Micro Mill MF 70 The unit is supplied with a stable base of cast iron. Both vertical column and compound table are of treated, high
quality aluminum. All axes are play-free and have adjustable slides. The headstock, made of die-cast aluminum, houses the 24 pole balanced
special motor and provides stability even at high operating speeds. This stability facilitates the use of the finest cutters. Six triple slit, hardened
Micromot steel collets come with the machine and cover shank sizes of 1/32”, 1/16”, 5/64”, 3/32”, 7/64” and 1/8” (1.0, 1.5, 2.0, 2.35, 3.0, 3.2 mm).
The table is fitted with three T-slots of the 15/32” x 15/64” x 13/64” (12 x 6 x 5 mm) Micromot-norm. An adjustable ruler scale eases the
positioning of the workpiece. All handwheels are zero adjustable with 1 revolution = 1/32” (1.0 mm), 1 division = .002” (0.05 mm). $399.95
Specifications Footprint 5-7/64” x 8-55/64” (130 x 225 mm) Features
B
Speed 5,000 – 20,000 rpm Height 13-25/64” (340 mm) A. Hand wheels with zero adjustable scales: 1 revolution = 3/64” (1.0mm).
Table Size 7-7/8” x 2-3/4” (200 x 70 mm) Max. Power 1/8 hp (100W) B. Continuously variable speeds from 5,000 – 20,000 rpm
X-Y Travel 5-17/64” and 1-13/16” (134 & 46 mm) Volts 110 – 120VAC, 60Hz C. Cutter clamping in Micromot system collets.
Vertical Travel 2-3/4” (70 mm) Weight 15.5 lb. (7 kg) D. Aluminum KT 70 MICRO Compound Table with adjustable dovetail slide axes.
E. Micromot Steel Collet Set, triple slit and hardened, from 1.0 to 3.2 mm.
C
F. Stable cast iron base.
G. Supplied complete with steel stepped clamp blocks. D

#88511 Hot Wire Cutter Thermocut 115/E Ideal for makers,

model builders, crafters, teachers and more. For building
architectural models and prototypes as well as classic model G
railroad, plane and boat items. 15-11/32” x 11” table ensures
smooth and easy movement of the workpiece, while the
printed grid and protractor assist with marking and cutting.
Solid aluminum overarm has a 13-3/4” throat and 5-1/2”
height. The holder and included wire coil (98’ x 0.008” dia.)
may be shifted and adjusted along the overarm to enable
miter cutting. A LED indicates operation and thus reminds you
not to touch the hot wire to prevent burnt fingers (the wire F
heats to maximum in less than 1 second). $169.95 E

#88514 Angle Polisher WP/E Features include quiet planetary #89257 Cordless Belt Sander BS/A
gear drive in die-cast aluminum housing and continuously variable Light, compact and user-friendly, this 10.8V Lithium-Ion-driven unit makes sanding,
speed control for constant speeds even during high contact pressure. Balanced motor is smoothing and shaping in tight spaces faster and easier than ever. Ideal for use with plastic,
powerful and long-lasting. Includes stylish case, rubber backing disk with hook-and-loop wood and metal, this unique tool is ideal for model building, sculpting, finishing, tool and
fastening system, polishing sponge (medium hard), lambswool polishing disk, polishing die making, and more. Use it for sanding and grinding in tight places, finishing molds,
felt for metals and non-ferrous metals (medium hard), 12 K 2000 sanding disks, Nigrin grooving, deburring, smoothing and chamfering of precision parts. Head rotates through
polishing emulsion (75 ml) and a microfiber cloth. $164.95 60˚ with the push of a button. Features a variable speed control and specially balanced DC
Genuine Proxxon Polishing and Sanding Accessories motor which is powerful, quiet and durable, plus a suction connection with vacuum adapter
to remove dust while working. Runs for up to 30 minutes on a single charge, even at maximum
#89110 Polishing Set includes 80 mm (3.15”) extension and 30 mm (1.2”) backing pad,
power. Set includes Cordless Belt Sander, four sanding belts: two each 80 and 180 grit (belts
twelve each 1,000 and 2,500 grit wave-edged sanding disks, and one each soft, medium
are 13” x 13/32”), battery, rapid charger, and sturdy storage/carry case. $275.00
and hard conical polishing sponges. $39.95
Extra Sanding Belts, $5.95/set of 5
Conical Sanding Sponges, 50 mm (2”), $8.95 each
#89111 Soft #89112 Medium #89113 Hard #89261 80 grit #89262 120 grit
#89263 180 grit
Wave-Edge Sanding Disks, 50 mm (2”), Pack of 12, $6.95/pack
#89286 Silicon Carbide
#89107 400 grit #89108 1000 grit #89109 2000 grit
Sanding Belts for glass,
#89105 Lambswool Polishing Disk $8.95 #89106 Polishing Felt $7.95 ceramic, brass, steel and
#88509 Micromot Tool Clamp for stationary use of Micromot hand-held tools, including cast iron. 180 grit.
the Angle Polisher and Rotary Tool. Note: Must be clamped in a bench vise for use. $10.95 Set of 5. $6.95

#84317 Heavy Duty Transformer

This heavy duty, 5 amp output, variable speed transformer provides the 12VDC power for all our Micro-Make™ / MicroLux
palm-size miniature power tools and a variety of Proxxon tools as well. Transformer contains special feedback circuitry that
automatically boosts the power to the tool when it is under load so that the speed remains constant. Provides twice as much
power and torque as standard transformers. Plugs into standard 120VAC household outlet. List $103.50 . . . Our Price $64.95
See our website for more Proxxon high-precision tools and accessories

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 29
 POWER TOOLS
MicroLux® High-Precision Heavy-Duty 7 x 16 Lathe and R8 Mini Milling Machine…
The ONLY “True InchTM” Machines on the Market!
Feature-packed design and robust construction make the MicroLux® 7 x 16 Lathe and R8 Miniature Milling Machine well-suited
for your most demanding turning and machining projects. Powerful 500W (2/3 hp) variable-speed brushless motors with
ultra-quiet belt-driven spindles provide the muscle, versatility and smooth operation required to create fine finishes on all
machinable metals including carbon steel, stainless steel, cast iron, aluminum, brass, copper, bronze, and nickel-silver, plus
non-metals such as wood and plastic. Careful workmanship and features including hardened and accurately finished main
spindles supported by high precision centripetal roller bearings give you high dimensional accuracy and long life. For
operating convenience, we’ve equipped both machines with .050 inch-per-turn “True Inch” table feed screws and dials…no
tedious metric conversions required. And, with the optional accessories available separately, these machines will perform
virtually any task you’ll ever need. See our website for complete specifications.

Lathe features include: Super rigid, heat-treated cast-iron bed with precision-ground Milling Machine features include: Super rigid, heat-treated cast-iron base, column and
V-ways • Carriage power feed • Reversing switch for bi-directional automatic feed and headstock with precision-ground V-ways • Tilting column for angle milling/drilling • .050”
thread cutting • Zero-resettable handwheels • Four-position tool post • Cam-lock tailstock per turn table feed screws with zero-resettable dials • Powerful adjustable-speed motor
• Packed in sub-assemblies for safe, easy transport. with feedback-sensing power boost circuitry • Lever-actuated spring-assisted headstock.
#84631 MicroLux® 7 x16 Lathe includes: #84630 MicroLux® R8 Miniature Milling Machine includes: 1/2” drill chuck and drawbar,
3-jaw self-centering chuck with inside/outside jaws and wrench, compound slide with table locks, column lock and drill stop, power supply with feedback-sensing power boost
5/8” capacity four-position tool post and chip deflector, MT2 dead center for tailstock, circuitry, V-way chip guards, chuck/collet chip guard, indicator scales for the X and Z
carriage power feed with change-gear set for threading, thread position indicator, splash directions, fine-adjust knob for the Z direction, safety cut-off switch, wrench set and
guard, chip tray, tool set and instruction manual/parts diagram. instruction manual/parts diagram.
List $1,800.00 . . . Our Price $1,599.95* List $1,800.00 . . . Our Price $1,599.95*

MicroLux® 7 x 16 HOTROD Lathe Super Value Package MicroLux®R8 Milling Machine Accessories
#86680
#87348 Super Duty Power Feed
Saves laborious hand cranking and feeds
table at uniform rate to produce fine
milled finishes. Electronic circuitry controls
table speed from 0 to 20” per minute in
both directions to automatically power off
motor at end of run. Includes adjustable limit
stops and clutch mechanism to disengage
motor for easy hand-cranking of the table.
Motor/clutch assembly mounts directly to
the left end of the mill table. Limit switch assembly requires 6 holes
to be drilled and tapped on back of mill table. Designed for use with
MicroLux® Milling Machine. $419.95

#88175 #86681

#88175 Micro-MakeTM Hotrod Lathe Super Value Package includes #84631 MicroLux®
7 x 16 Mini Lathe, #84692 Digital Speed Readout, #86680 Lever & Handwheel Kit and
#86681 Metal Gear Kit. Value $2,069.75 . . . Super Buy $1,799.95*
#86680 Handwheel & Lever Kit Chrome-plated levers and anodized aluminum hand-
wheels add gleaming shine and a blast of color, giving your MicroLux® machine the look of
a hotrod in about 30 minutes. Plus, they feel as good as they look! $84.95
#86681 Metal Gear Kit A superb upgrade
#84692
to your MicroLux® Lathe. Replace your stock #87923 Digital Rotary Table can be mounted horizontally or vertically to the milling
plastic gears with strong, dependable metal table for machining a wide variety of precision parts. One revolution of the handwheel
parts. A must for the professional and com- rotates the 4” diameter table 5˚. Table has rotational accuracy of 10 seconds (0.0027˚).
mitted hobbyist alike. Never worry about Digital readout unit can be set to display in degrees and minutes or in decimal degrees.
downtime due to broken gears. Includes Readout resolution: 1 minute (0.0166˚). Table has a MT2 hole and includes an adapter
80-tooth gears for power feed. $139.95 plate for mounting our #82512 3-jaw lathe chuck and #82505 4-jaw lathe chuck (sold
#84692 Digital Speed Readout for 7 x 16 separately). For use with MicroLux® Milling Machine. $395.95
Lathe and R8 Milling Machine includes
magnetic base. Plugs into control panel to
display spindle speed in RPM. $229.95
See more Lathe and Milling Machine Accessories on the following pages

30 • ORDER TOLL FREE 1-800-225-1066 *Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance. See our website for video
Follow us on POWER TOOLS

Most Popular Lathe Accessories Most Popular Milling Machine Accessories

#84900 Deluxe Starter ER Collet Sets for Milling Machines
Tooling Set for 7 x 16 Lathe and Lathes have a wide gripping
Includes range (about .040”) and provide a fast,
#82501 Cutters, easy and accurate way of holding
#82766 Cut-Off Tool, tooling. When used in a lathe, they
#31114 Center Drills, hold stock more accurately and have
#82507 Tailstock Chuck, a better grip than chucks, and thin-
#82509 Ball Bearing wall tubes can be gripped without
Center, #82506 distortion. They’re quick to set up
Quick Change Tool Post. and can be used at high speed.
List $256.70 . . . Our Price $224.95 Our ER collet sets include a precision
For ground shank, “snap-in” collets with
#84833 Radius Turning Tool turns a Lathes compression nut, a spanner for easy
radius or cuts a ball-shape up to 3/4”
diameter on the end of a workpiece. & Mills! #84700 tightening, and a custom molded case.
Includes high speed steel tool bit.
Set # Price Type Shank Drawbar Hole
Made of blackened steel.
List $87.50 . . . Our Price $59.95 #84699 $149.95 ER25 MT3 (Lathe) M12 x 1.75
#84834X2 Extra Tool Bits (2) $9.95 Includes collet sizes: 3/64, 3/32, 1/8, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8, 13/32, 7/16, 1/2, 17/32, 9/16, 5/8
#84700 $149.95 ER25 R8 (Milling Machine) 7/16-20
Use the
Includes collet sizes: 3/64, 3/32, 1/8, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8, 13/32, 7/16, 1/2, 17/32, 9/16, 5/8
Radius Tool
to make these
shapes: #87469

#83185 MT2 Live Center Set

with 7 Tips Ball bearing-equipped
mandrel with MT2 shank installs in lathe #83383
tailstock. Rotates with the workpiece
while supporting it during turning
operations. Includes 7 interchangeable
tips – 5 point centers in 4 sizes for
center-drilled shafts, a cup center for #87469 2” Self-Centering Machinist’s Vise This 360˚-rotating, self-centering vise features
pointed shafts or small diameter rods, an adjustable gib to control side-play in the movement of the jaws, a removable handle
and a cone for pipe – plus knock out pin that slides off for quick and easy repositioning, and 2” wide steel jaws that open to 2-1/16”
and beautifully finished, compartmented to accommodate a wide variety of projects. Best of all, your workpiece will always be
wood storage box. $109.95 precisely aligned, thanks to the vise’s unique self-centering design. 1/2” thick base
includes 3/8” wide x 1/2” long slots at each end for mounting, either to T-slots on machine
tool tables, or to a workbench. List $210.00 . . . Our Price $189.95
#83383 Two-Way Vise for Milling Machine and Drill Press Mounts to milling machine
#83164 Rotating 3-jaw Live Tailstock or drill press table. Rotates 360 degrees and inclines from 0 to 90 degrees to mill or drill
Chuck spins on smooth, sealed bearing to at any angle in-between. 2” wide x 1” deep jaws open 1-7/8”. Height at 0 incline is 3-5/8”.
support small diameter stock while turning Includes engraved markings for degrees of incline and rotation. $169.95
in the lathe. Use when there is insufficient
room for follower rest. MT2 shank. Includes #84644 Precision 1-2-3 Blocks (1”x2”x3”) are case hardened
chuck key. 1/2” capacity. $74.95 on all sides to 55-60 Rc and ground parallel, flat and square
within 0.0003”. They have 5 tapped holes (3/8-16) and
18 untapped holes so they can be bolted
together in pairs to form custom sizes,
angle plates, V-blocks, etc. Set includes
2 matched blocks. $30.95 per set

#82507 Tailstock Chuck MT2 shank.

Holds drills 1/32” to 1/2” diameter. #82578 42-piece Clamping Set Includes
Includes key. $49.95 12 studs, 6 pairs of step blocks, 4 tee nuts
(for 12 mm wide slots), 4 flange nuts,
#82505 #82502 4 coupling nuts and 6 hold-down bars,
4-Jaw Independent Chuck Face Plate plus easy-access storage rack. $89.95*
Allows turning off-center or holding bolts to lathe
irregular parts. Body dia. = 3.150”. headstock
Internal jaws clamping range = .196 to
1.378”. External jaws clamping range =
spindle using
bolts from 3-jaw
J
1.378 to 3.150”. Approx. 7/8” diameter chuck. 6-1/4”
thru-hole. $109.95 diameter. #82576 8-piece End Mill Set
$40.95 (Single End) Includes eight
#86679 Carriage Stop center cut, 2-flute end mills in
provides adjustable stop #82501 the following sizes: 1/8, 3/16,
for multi-pass turning. Carbide 1/4, 5/16, 3/8, 1/2, 9/16 and
Speeds-up machining Cutters 5/8 inch. $74.95
process and helps 11-piece
to lock carriage in set with
position for facing 5/16” #82283 3-piece Countersink Set
cuts. Locking lever square High-speed steel, six-flute design makes smooth 82° countersinks for flush mounting flat
allows quick tool-less shanks. head screws in wood, plastic, aluminum, brass and soft steel. 3-piece set includes 3/16”,
adjustment. $30.95 $74.95 1/4” and 3/8” dia. with 3/16” and 1/4” shanks. $22.95

*Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance. ORDER ONLINE www.micromark.com • 31
 NEW ITEMS POWER TOOLS

More Lathe and Milling Machine Accessories Check tool holder capacity and shank size before ordering. User provides mounting hardware.

#82734 Milling Attachment for Mini

Lathes bolts to top of cross slide to hold
stock while milling with a
cutter mounted in the
headstock. Moves 3-1/2”
vertically. Rotates on the cross
slide pivot. Tilts up to 50° left or
#83266 right of vertical. Heavy
Larger Capacity duty 2-5/8” wide vise
Self-Centering 3-Jaw Chuck holds workpieces up to
#83371 Self-Centering 4-Jaw Chuck with 5/8” dia. #82512 Self-Centering 3-Jaw Chuck Body dia. = with 7/8” dia. bore allows full use of 2” high. 16 tpi lead screw.
bore. Body dia. = 3.150”. Internal jaws clamping range = 3.150”. Internal jaws clamping range = .079 to .866”. hole through MicroLux® Lathe spindle. Body dia. = 3.937”. Includes adjustable gibs
.079 to .866”. Internal jaws jamming range = .984 to Internal jaws jamming range = .984 to 2.756”. External Internal jaws clamping range = .078 to 1.181”. Internal and lock lever. Cast iron
2.756”. External jaws clamping range = .866 to 2.480”. jaws clamping range = .866 to 2.480”. Approx. 5/8” dia. jaws jamming range = 1.181 to 3.543”. External jaws and steel with molded
Includes internal and external jaws, plus key. $144.95 thru-hole. $139.95 clamping range = 1.181 to 3.150”. $179.95 handwheel. $299.95*

HSS Lathe Tool Bit Sets include 8 different pre-shaped

high-speed steel square shank lathe tool bits that turn, #82506 Quick Change Tool Post Mounting base with
#90225 10-piece HSS Woodruff Key Cutter Set thread, groove, bore and cut-off. Choose shank size below: #82689 Rocker Tool Post lets you adjust position of dovetail lock and three adjustable holders (3/8” capacity)
Woodruff cutters are used for milling (cutting or shaping) #82757 Eight-Piece HSS MINI Tool Bit Set, 1/4” tool bit to exact center of workpiece without shimming. let you preset tool bits to the perfect cutting height
Woodruff key slots in metal materials. Set includes 1/2” Square Shank x 2-1/2” long. $44.95 Compensates for worn or resharpened cutting tools. without shimming. Makes tool bit changes quick and
shank American Standard #403, 204, 404, 305, 505, 406, #82761 Eight-Piece HSS MICRO Tool Bit Set, 1/8” Double-sided to hold two bits. Indexes on compound rest. easy. $129.95
606, 806, 608, and 808. List $89.95 . . . Our Price $75.95 Square Shank x 2-3/8” long. $39.95 5/8” capacity. $50.95 #82574 Extra Tool Holders (Set of 3) $70.95

#89335 6-piece Shim Set for Lathe Tool Post #82766 Jumbo
provides just the right selection of thick- Cut-Off Tool and
nesses to achieve critical centerline Holder Super sharp 1/2” #82503
alignment when mounting high blade for heavy duty
a cutter. Use individually or cutting-off of large diameter
combined to achieve the stock. 3/8” tool holder with black
height required. Set includes: oxide finish fits lathe tool post. Blade is #82504
.004”, .011”, .019”, .039”, 4-1/2” long x 3/32” wide. Note: Must be used
.059”, and .078”. Each shim is with #82506 Quick Change Tool Post. $29.95
3/8” wide x 1-3/4” long. $9.95
#82767 Extra 1/2” Cut-Off Blade $12.95
#82753 Micro Cut-Off Tool Holder with Blade includes 1/16” wide x 3/16” #82503 Steady Rest clamps onto bed to support long
high x 2-1/2” long pre-sharpened HSS cut-off blade and hex wrench. 5/16” stock up to 1” in diameter. $60.95 #82570 Tool Rest & Spur Driver for Lathe Tool rest
square shank. Black oxide finish. 3” long. $11.95 #82504 Follower Rest bolts to carriage. Follows mounts to tool post for use with wood turning tools.
#82754 Extra Cut-Off Blade $7.95 cutting tool to prevent deflection of thin stock. $50.95 Includes MT3 spur driver for headstock. $64.95

Boring Head
A Use to machine a pre-drilled hole or inside
wall of a cylinder to final size (up to 3” dia.)
B and finish. Head offsets up to .625” and
holds 1/2” shank boring tools sold below.
Includes adjuster dial with .001” gradua-
C tions and 2 wrenches.
$99.95 each
#83379 Boring Head with R8 shank #84753
(fits MicroLux® #84630 Milling Over/Under Chucking Reamer Set
Machine) Includes .001” undersize reamers for press-fit and .001”
#84685 Boring Head with oversize reamers for sliding-fit of pins and shafts. Nominal
A. – C. Rotary Table, Dividing Plate & Tailstock Set
#82577 Quick-Lock Milling Vise bolts directly to top straight 1/2” shank sizes 1/8, 3/16, 1/4, 5/16, 3/8, 7/16 and 1/2 inch...14 high
Buy these 3 precision milling tools together at a
of milling table. Jaws are 4” wide x 7/8” deep and open speed steel reamers in all, plus vinyl storage case.
money-saving combo price. Set includes:
3-1/8”. Overall height 2-5/8”. Made of machined steel. List $129.95 . . . Our Price $109.95
A. Rotary Table 4” diameter. One revolution of the
handwheel rotates the table 5°. Allows you to create an $109.95
#89234
incredible variety of precision parts. Table has MT2 hole. 6-piece End Mill Sets Double end, center cut, 3/8” shank. The Complete
Includes adapter plate to mount the #82512 3-Jaw Chuck Sets include 1/8, 5/32, 3/16, 1/4, 5/16 and 3/8 inch end Metalsmith,
and #82505 4-Jaw Chuck. T-slot size = 5/16”. mills. 3/8” length of cut. 3rd Edition,
See web site for full specifications. by Tim
#84634 6-piece End Mill Set, 4-flute
B. Dividing Plate Replaces the handwheel on the McCreight
for milling steel.
rotary table. Accurately rotates stock a set number of This excellent book
$49.95
degrees. Examples: for milling teeth on a gear, flats on a provides detailed
nut, or drilling equally spaced holes. explanations and
C. Tailstock Supports the end of a shaft when the rotary #84634 up-to-date
table is placed vertically on the machine table. information on
#82795 Rotary Table, #82765 Carbide Tipped Boring Tool Set for use with more than 125
Dividing Plate & Tailstock Set $479.95* boring heads sold above. Includes 9 different sizes in tip techniques, making this the authoritative shop guide for
Each item available separately. lengths from 3/4” to 3” with 1/2” shanks and nicely finished experienced metalworkers, and the single source of
See #82792, #82793 and #82794 at micromark.com wood storage rack. $44.95 practical technical information for all. $39.95

32 • ORDER TOLL FREE 1-800-225-1066 *Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance.
 Follow us on POWER TOOLS NEW ITEMS

See Additional Lathe and Milling Accessories Online! #90469 iGaging 8-piece
“Right On” Precision Setup Block Set
Used to set bit and blade heights, drill press depth stop, plunge
routers and virtually every machine in your shop physically,
#86678 precisely and accurately. Each 3” long block is cast in solid
Knurling Tool aluminum with anodized finish. Blocks are accurate to
produces a fine within a thousandth of an inch in the following
(0.8 mm pitch) #82284 Center Drill Set Drills properly contoured holes thicknesses: 1/16”, 3/32”, 1/8”, 3/16”, 1/4”, 3/8”,
diamond-pattern so workpiece can be mounted between centers. Four-piece 1/2”, 7/8”. Includes foam-lined case. $39.95
knurl on stock set includes nos. 1, 2, 3 and 4. $19.95 See more iGauging Precision Measuring Products
up to 2” (50 mm) throughout the catalog and at www.micromark.com
in diameter.
13 mm mounting bar fits the stock tool post of MicroLux®
Mini Lathe and many other machines. Tool is adjustable #89415 iGaging
for various diameter workpieces and is designed to absorb 15-piece ”Right On”
the stress of the knurling operation without putting Precision Setup Block Set
additional strain on your lathe. $64.95 Used to set bit and blade
heights, drill press depth
stop, plunge routers and
virtually every machine in your
shop physically, precisely and
accurately. Each 3” long block is
cast in solid aluminum with
anodized finish. Blocks are
#89327 Bell Punch Center Finder quickly and easily accurate to within a thousandth
#82883 Grinder Attachment for Mini Lathe bolts to locates the center of any solid, round rod from 3/8” to of an inch in the following
top of cross slide of mini lathes to grind stock smooth while 1-1/2” in diameter and in any material, including wood,
#82771 Diamond Pattern Knurling Tool Raises a plastic and soft metals typically used for production on
thicknesses: 1/16”, 3/32”, 1/8”,
series of crossed, angled ridges in a diamond pattern on turning in the headstock. 1/3 hp motor turns grinding 5/32”, 3/16”, 7/32”, 1/4”, 5/16”,
wheels 6,000 rpm; plugs into 120VAC wall outlet. Includes lathes, mills and drill presses. To use, insert the rod into the 3/8”, 7/16”, 15/32”, 1/2”, 23/32”
workpieces and shafts, making decorative finishes and/or
slip-proof grips. Pivoting head assures equal pressure of two 3-1/8” dia. x 3/8” wide grinding wheels. $209.95* “bell” until the rod is in full 360˚contact with the interior and 3/4”. Also includes a precision
Replacement Grinding Wheels – $24.95 ea. wall of the bell. A hammer-tap to the punch shaft produces 1”x2” x3” block engraved in 1/32”
both wheels on workpiece. Dual 3/4” dia. x 5/16” wide a perfectly centered mark. A quality tool, made entirely of
wheels; 1/2” square x 4” long black oxide steel shank. #82961 Wheel for workpieces (pink, 60/80 grit) increments, plus case. $79.95
machined steel. $25.95
$19.95 #82962 Wheel for tool bits (green, 60/80 grit)
#83291 Machine Stand
#82743 Mini Cut-Off Supports machines
and Boring Bar Set weighing up to 400 lbs.
includes extra-sharp at a comfortable working
3/8” high x 1/16” height of 35”. Adjustable
wide high speed feet provide stability on
steel cut-off uneven floors. 14” x 31”
blade with #86483 Indexable Tool Holder Set Five 6 mm (.235”)
square x 2-1/2” long blackened steel shanks fit MicroLux® composite wood top
3/8” holder, with honey-color veneer
plus 3/8” dia. and other mini lathe tool holders. Triangular carbide inserts
with 1/64” radius cutting tips index to 3 positions to restore includes pull out shelf for
carbide-tipped boring tool holding tools while you
bit (makes cuts inside a cylinder) and 1/2” square holder. the cutting edge when needed. Grade PC300 TiN-TiC-TiN
coated for cutting at higher speeds and with greater work. Frame and legs
Note: Mini Cut-Off holder fits #82689 Rocker Tool Post (sold have rust-resistant black
separately) and standard tool post provided with our lubricity. Includes 5 cutting angles: 2 left, 2 right, and
1 center, plus T8 wrench for retaining screws. $59.95 powder coat finish. No
#84631 7x16 Lathe. Not for use with #82506 Quick Change lightweight…this stand
Tool Post. $50.95 #86484 5-piece Replacement Insert Set $39.95 weighs a hefty 29 lbs.
Shipped unassembled. Machines not included.
#82768 3-piece Fly Cutter Set Used in the milling machine to cut a large flat surface Stand ships unassembled.
$129.95*
on a piece of stock. Includes 3 black oxide steel holders: 3/4”, 1-1/8” and 1-3/8” diameter,
3 ready-to-sharpen tool blanks, and wood storage rack. 1/2” shanks. $29.95
#82769 Set of 3 Fly Cutter Tool Blanks (one for each holder) $9.95

#14255 Precision Ground V Blocks

V Blocks are the best way to hold round tubing or bar stock
securely for milling, cutting, grinding, drilling and filing.
Fine quality hardened tool steel is milled and polished on
all 6 sides, making a perfectly matched set with all sides
square to each other. Holds stock up to 1” dia. Blocks are
approximately 1-1/4” square x 1-5/8” long. Set includes #86548 Lighted Magnifier with Magnetic
two V Blocks and two clamps. $49.95 Base Industrial-quality lighted magnifier
has magnetic base that securely attaches
Keep Your Cool While You Work to machine tool table, machine frame or
#83338 MicroFlowTM Coolant System Compressor-less steel workbench. Push-button activated #85594 High Intensity LED Worklight
system directs a very fine stream of lubricating coolant ring of battery-powered LEDs provides the Includes 3-mode switch for high beam,
only where the cutter meets the workpiece. Includes 4 liter light you need to see your workpiece low beam and flash. Light is housed in a
heavy-duty tank with self-contained low-voltage pump through the crystal-clear 3-1/4” diameter compact aluminum body with 1x2000
and on/off switch, magnetic base with adjustable nozzle magnifying lens. Main magnification: 4x zoom fisheye lens. Includes a detachable
holder, 3 nozzles to adjust flow rate and 32” of tubing. Use plus 3/4” diameter 8x spot viewer. 9” long 8” flexible arm with a super-strong – 40 lbs.
with oil-less synthetic coolants only (see below). $59.95 flexible metal arm holds lens right where of pull – magnetic base. Worklight is ideal
you want it. Bonus: Includes a double-duty for use on the steel work tables of machine
#83340 MicroFlowTM Coolant & Lubricant 16 ounce 8” x 2” steel center-finder ruler/protractor tools, automotive applications and other
concentrate makes up to 4 gallons when mixed with water. that also provides a base for the magnifier. magnetic surfaces. Includes 3-cell AAA
$9.95 Batteries included. $44.95 battery. $39.95

*Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance. ORDER ONLINE www.micromark.com • 33
 POWER TOOLS
Micro-Mark is proud to welcome the return of made-in-the-USA Sherline Products to our machine tool offering!
Sherline tools are used throughout the world in every application from industry and production to hobbyists and model makers; wherever
there is a need for small, high-quality, precision-machined parts in metal, plastic and wood, you’ll find Sherline tools. Designed to be operated
by any craftsperson with a “common sense” knowledge of mechanics, the skills of an experienced machinist are not required to get started
and achieve great results. And, no matter how your interests may change or grow in the future, Sherline tools will adapt to suit your needs.
Unless you are replacing an existing Sherline machine, most machinists new to the hobby have an immediate need for a
selection of key accessories including chucks, holding fixtures and cutting tools in order to set up shop and start making
things. Purchasing these essential accessories as a package with the machine offers two significant advantages: first, we
make it easy to identify exactly what you need by pre-selecting the most important items for you; second, we are able to
offer each machine package at a money-saving price as compared to buying all the items individually. It’s a win/win!

Sherline Ultimate Machine Shop Packages…

Set up a complete mini machine shop with just one purchase!
#88652 Sherline 6280 NexGen Ultimate Machine Shop Package includes: Sherline 5800 Series Milling Machine and all of its
standard equipment; Sherline 4400 Series 3.5” x 17” Lathe and all of its standard equipment; additional milling accessories including
step block hold-down set; fly cutter; boring head; 3-piece mill collet set with drawbolt; boring tool (5/16” min. hole, 1” max. depth);
1/4” drill chuck and key with #1 morse arbor and drawbolt; 3/8” end mill holder; milling vise; 4” manual rotary table; tilting angle
table; 6-piece 3/8” shank double-ended, 2-flute end mill set; additional
lathe accessories including 3.1” 3-jaw self-centering chuck; 3/8” drill
chuck with key; #0 and #1 Morse arbors and drawbolt; steady rest; live
center; rear-mount cut-off tool and holder; 3-piece 1/4” HSS cutting tool
set (rh, lh, boring); plus additional accessories including Sherline 5/32”
hex T-driver; 3-piece center drill set; safety glasses and Sherline Accessories
Shop Guide instruction book. $3,968.00

#88650 Sherline 6000 Deluxe #88651 Sherline 6200 8-Direction

Ultimate Machine Shop Package includes: Ultimate Machine Shop Package includes:
Sherline 5400 Series Milling Machine and Sherline 2000 Series Milling Machine and all of its
all of its standard equipment; Sherline 4400 Series standard equipment; Sherline 4400 Series 3.5” x 17”
3.5” x 17” Lathe and all of its standard equipment; Lathe and all of its standard equipment; plus all of the
plus all of the milling, lathe and milling, lathe and additional accessories listed in the
additional accessories listed in #88652 package above.
the #88652 package above. $2,932.00
$2,639.00

See our website for additional information and specifications.

Learn the Essentials of Small-Scale Machining with these Books
#88654 #88656 #88900 Tabletop
Sherline Sherline Machining, by Joe Martin.
5400 Series 2000 Series 8-1/2” x 11”, softbound
Deluxe 8-Direction with “lay-flat” binding,
Vertical Milling Vertical Milling full color, 344 pages,
Machine Package Machine Package 400+ color photos,
$1,140.00 $1,395.00 200+ illustrations.
Super Buy $44.00

#88901 The Home

Machinist’s Handbook,
by Doug Briney. 7-3/4” x
9-1/4”, softbound, black and
white, 285 pages. $22.00

34 • ORDER TOLL FREE 1-800-225-1066 • OUTSIDE USA CALL 1-908-464-2984 See our website for a video of this item in use
 Follow us on HAND TOOLS POWER TOOLS
MicroLux® Drill Presses Are Just the Right Size with Just the Right Features for All Small Drilling Projects
Features include: Changeable speeds to accommodate various materials • Rugged cast metal housing • No-flex solid steel column • Precision 3-jaw chuck and key • Ball bearing
spindle assures low vibration, high accuracy and long life • Calibrated depth control with positive stop • High-torque motor plugs into standard 120VAC outlet • Quick release handle
lets you adjust chuck-to-base distance instantly • Cast metal base with machined surface keeps your work square and true and takes up minimal workbench space.

MicroLux® Heavy Duty Drill Press with Variable MicroLux®

Speed Control and Digital Depthfinder Standard Duty
• Spindle travel: 1-9/16” • Chuck to base distance: 8” 3-speed Mini
• Center of chuck to front of column: 6-1/2” • Column • High quality…
diameter: 1.181” • Chuck capacity: 1/64” to 1/4”
Drill Press
Made in Japan
• Drive: 2-step pulley with 150W variable speed motor • Spindle travel: 1-1/4”
• Base size: 6-1/2” x 10-13/16” • Spindle: 0 to 3600 rpm;
0 to 5000 rpm; JT1 taper (male) • Headstock and base • Chuck to base distance: 7”
construction: cast iron • Digital depthfinder with • Center of chuck to front of
re-zero indicates spindle movement in inches or mm column: 5-1/2”
• Dial speed control with • Column dia: .787”
PWM for high torque • Chuck capacity: 1/64” to 1/4”
at low speed #88537 MicroLux®
• Weight: 27 lbs.; Variable Speed Mini Drill • Spindle speeds: 2100, 4500,
Height: 16” Press Super Value Package and 6500 rpm
• Spindle: 3/8-24 male
• Drive system:
3-step pulley with
90 watt constant
speed motor
• Base size: 5” x 9”;
Height: 14”
• Headstock and base
#82959 construction:
MicroLux® cast aluminum
Heavy Duty
• Weight: 8 lbs.
Variable Speed #87728
Drill Press ONLY MicroLux® Heavy Duty #81631 MicroLux® Standard Duty 3-speed Mini
List $419.95 Variable Speed Drill Press Drill Press ONLY. List $280.00 Our Price $209.95
Our Price $359.95* Super Value Package #15117 Extra Drive Belt for above $9.95

MicroLux® Heavy Duty Variable Speed Drill Press Super Value Package MicroLux® Variable Speed Mini Drill Press Super Value Package
Package includes: #82959 MicroLux® Heavy Duty Variable Speed Drill Press with Depthfinder • #88421 60-piece High Speed This package transforms the MicroLux® Standard Duty 3-speed Mini Drill Press into a variable speed machine.
Steel Drill Bit Set • #82546 Quick Jaw Vise • #10101 Machinist’s Center Punch. Package includes: #81631 MicroLux® Mini Drill Press • #88343 Table-top Speed Control • #15118 Drill Press Vise • #14143
#87728 MicroLux® Heavy Duty Variable Speed Drill Press Super Value Package. Value $429.85 Super Buy $394.95* 8-Piece Drill Bit Set, 1/64” to 1/8”. #88537 V.S. Mini Drill Press Super Value Package. Value $327.80 Super Buy $299.95
#87728K Variable Speed Drill Press Accessory Value Package includes the drill bit set, vise and center punch from the #88537K MicroLux® Variable Speed Mini Drill Press Accessory Value Package converts your existing #81631 MicroLux
set above, minus the drill press. Value $79.90 Super Buy $59.95 3-Speed Standard Duty Mini Drill Press into a variable speed machine. Includes the 3 accessories from #88537, minus
*Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance. the Drill Press, for one great price. Value $137.95 Super Buy $119.95

Drill Press Vise X-Y Table Attachment Increases Drill Press Accuracy by 30 Times!
The MicroLux® X-Y Table Attachment increases the accuracy of hole locations to
within .0005” of true position – 30 times better than “eyeball” center-punching!
Table positioning is controlled in the X and Y directions by smooth-acting zero-
adjustable handwheels. Adjustable gibs in dovetail guides maintain accuracy
and eliminate side play even after many years of use, and special retractable
covers keep the lead screws free of chips. Although designed specifically for
both MicroLux® Drill Presses, our table attachment can be easily mounted to
other machines. Includes sliding front scale, hold-down clamps, mounting
hardware and template, and hardware for mounting the #15118 Vise (at left).
Made of steel, aluminum and engineering polymers.
X Direction travel: 5-1/4” Y Direction travel: 1-3/4”
Table size: 8-1/4” L x 2-3/4” D Dial graduations: .001”; .050” per revolution
Base size: 3-3/4” x 5-1/2” Overall size:10-1/2” L x 7-1/2” D x 1-11/16” H
Grooved base fits on MicroLux® Standard #82389 MicroLux® X-Y Table Attachment. List $155.80 . . . Our Price $99.95
Duty Drill Press sliding gauge, or mount
with clamps to X-Y Table. Made of cast Step Clamp Set for X-Y Table
aluminum with easy grip plastic knob
and steel screw. Jaws are 2” wide with
grooves for holding round stock. Also Step blocks and clamp bars adjust to the
has a handy anvil top with a cast-in hole height you need to clamp workpieces to
for supporting micro size parts while the #82389 X-Y Table Attachment shown
drilling. Jaws open to 1-1/4”. above. See our website for details.
#15118 Drill Press Vise $29.95 #84762 Step Clamp Set $49.95
10-piece Carbide Drill Bit Sets These super sharp, longer-lasting bits
cut cleaner holes – and do it fast – in a wide variety of materials. 1/8”
shank. Plastic storage case included. List $45.00 ea. Our Price $39.95 ea.
#86676 10-piece Carbide Drill Bit Inch Set includes: 1/64, #75
(.021”), 1/32, # 61 (.039”), 3/64, 1/16, 5/64, 3/32, 7/64 and 1/8.
#86677 10-piece Carbide Drill Bit Metric Set
includes: .5, .6, .7, .8, .9, 1.0, 1.5, 2.0, 2.5, 3.0 mm.
#86675 10-piece HSS Metric Drill Bit Set with 3/32” shanks:
#86676 #86677 #86675
.7, .8, .9, 1.0, 1.4, 1.6, 1.8, 2.0, 2.2 mm. $29.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 35
 NEW ITEMS HAND TOOLS SUPPLIES
#88420 115-piece High Speed Steel Drill
#86372
Bit Set The ultimate drill bit set!
50-piece
115 sizes in high speed steel
Titanium Nitride
with titanium nitride
(TiN) Coated
coating.
Mini Drill Bit Set

Sizes:
#1 – #60
with equivalent
dimensional sizing
clearly marked in #88421 60-piece High Speed Steel Drill Bit
thousandths of an Set The titanium nitride (TiN) coating on this
inch, 29 fractional bits from 60-piece #1 – #60 high speed steel drill bit set
1/16” to 1/2” by 1/64” increments, ensures significantly cooler cutting temps. Bits Includes 10 each 1/16, 5/64, 3/32, 7/64
and 26 letter bits, A – Z. All bits are will last 4 times longer than standard. 135° and 1/8 inch diameter high speed steel
ground to 135° pointed angles for pointed angle grinds for general purpose use mini bits packaged in a compartmented
general purpose use on wood, metal, and on wood, metal, plastic and more. Comes in a plastic case. Use on wood, metal, plastic
plastic as well as most other materials. Comes in sturdy metal box with multi-tiered, easy-access and more. List $30.00 Our Price $24.95
a sturdy metal box with easy-access racks. $99.95 rack. List $40.00 . . . Our Price $34.95
#10101
Hard-to-Find High Speed Steel Drill Bit Sets Automatic Center Punches
#82727 This most-asked-for 20-piece set includes one each of #41 (.096”) through Save Time, Increase
#10102
#60 (.040”) in a pouch that’s numbered for easy identification. $24.95 Accuracy
#14143 8-piece inch set includes Excellent for creating a dimple in wood, plastic and metal to keep your drill bit from
one each 1/64”, 1/32”, 3/64”, wandering. They’re also used for marking, starting wood screws, perforating, embossing,
1/16”, 5/64”, 3/32”, 7/64” simulating rivets and countersinking miniature nails. Just set variable pressure adjust-
and 1/8”. $12.95 ment screw for light, medium or heavy stroke, press point against surface and the
#60437 10-piece metric set self-contained hammer mechanism automatically releases.
includes 1 each .5 mm to #10101 Machinist’s Type #10102 Jeweler’s Type Center Punch
5 mm, in .5 mm increments. Center Punch Lightweight, pencil size with aluminum body,
$14.95 Hardened and tempered point. pocket clip and hardened steel point.
#82727
1/2” dia. x 5” long. $14.95 5/16” diameter x 5-1/2” long. $29.95

Toolmaker’s Vises Hold Tight Gentle Jaws Hold Parts Securely Without Marring
for Drill Press Work

#21134 #60282
#80848 #89241 #89242
Non-marring jaw faces hold parts securely, yet gently, preventing damage to soft and
Machinists and toolmakers always lock their work in a vise. Our vises are cast and ground
delicate items. Magnets on the back side keep the jaws in place on steel and cast iron
tool steel. Both will stand flat on base or side and have vertical and horizontal V grooves in
vises (like #21134, at left). Gentle Jaws are 3” wide. Sold in sets of 2.
jaw faces for holding round stock. Heavy-duty, well-made tools for a lifetime of use.
#80848 Rubber-Lined Gentle Jaws, 3” wide x 1-1/4” tall. List $19.95 Our Price $14.95
#21134 Full-size model weighs over 5 lbs. #60282 Mini model weighs 1-1/2 lbs.
Has 2-1/2” wide x 1-1/2” deep jaws. 2-1/2” 1-7/16” wide x 7/8” deep jaws. 1-3/4” #89241 Leather-Lined Gentle Jaws, 3” wide x 1-3/8” tall. $13.95
capacity. List $53.95 . . . Our Price $49.95 capacity. List $44.75 . . . Our Price $39.95 #89242 Semi-Firm Foam-Lined Gentle Jaws, 3” wide x 1-3/8” tall. $13.95

Micro-Size Drill Bits Beware #86136 Pin Vise with Wood Swivel
Our drill bits are top quality of Cheap Head Wood swivel head fits your palm
high speed steel for use on Imitations! perfectly while drilling, tapping and
wood, plastic and metal and holding workpieces. Sure-grip
will stay sharp far longer than knurled barrel contains two
ordinary carbon bits. blackened steel,
#26104 Micro Drill Bit Set double-ended
with Steel Index includes collets
that hold
20 bits from #61 (.039”) to #80 all sizes from 0
(.0135”). Folding index features to 1/8” diameter.
embossed I.D. for each bit. 4” long overall. $12.95
#26104
List $24.95 . . . Our Price $14.95

Drill Bit Six-Packs* – $7.95 each *Six of the same size bit in an envelope
Six-packs include six same-size high speed steel drill bits in an envelope. For use on wood, plastic and metal. #90317 Slim Line Precision Pin Vise offers
#15167 #61 (.039”) #15169 #63 (.037”) #15171 #65 (.035”) #15173 #67 (.032”) #15175 #69 (.0292”) #15177 #71 (.026”) #15179 #73 (.024”) a contoured non-slip plastic handle with an
#15168 #62 (.038”) #15170 #64 (.036”) #15172 #66 (.033”) #15174 #68 (.031”) #15176 #70 (.028”) #15178 #72 (.025”) #15180 #74 (.0225”) “X” sliced precision collet. Accepts #61 – 80
drills bits for delicate, balanced drilling.
Drill Bit Six-Packs* – $8.95 each *Six of the same size bit in an envelope 3-3/4” long with knurled metal collet nut.
#15181 #75 (.021”) #15182 #76 (.020”) #15183 #77 (.018”) #15184 #78 (.016”) #15185 #79 (.0145”) #15186 #80 (.0135”) Collet closes to zero. $9.95

36 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 SUPPLIES HAND TOOLS Follow us on
Quick-Jaw Vise for
A MicroLux® Drill Presses
and More
Use pin vises for
holding drill bits,
reamers, needle
B files, screws,
E taps, wires…
H
even pins.

C Also fits Dremel

G drill presses and workstations.
D The slots in our vise and the mounting
F screws we provide let you position your
work in almost any location. The spring
A. #21106 Heavy Duty Pin Vise for holding larger size drill bits, files, taps, etc. Plastic action spindle latch holds work tightly
handle with keyless Jacobs type chuck holds all shanks from #72 (.025”) through 1/4” dia. Bit & Screw or releases in an instant. Made of steel and
6” long overall. $12.95 Gauges cast aluminum. Jaws are 2-3/4” wide x
B. #21105 Swivel Head Pin Vise with freewheeling head is especially suited for drilling #10123 Drill Bit 1” deep. One jaw has horizontal V grooves
and tapping. Nickel plated steel with two double ended collets: 0, 1/16, 3/32 and 1/8”. and Screw Gauge to hold round stock. 2-1/4” capacity; closes
3-1/2” long overall. $11.95 Measures drill bits to 0. A great vise for a wide variety of uses.
C. #80743 Ball Head Pin Vise Large freewheeling 1-1/4” dia. plastic head fits comfortably from #1 – #60. #82546 Quick-Jaw Vise $29.95
in your palm. Nickel-plated steel with four collets: 0, 1/16, 3/32 and 1/8”. 3-1/2” long Includes decimal
overall. $14.95 equivalents, tap,
tap drill and body 4-piece
D. #15116 High Precision Micro Pin Vise This exceptionally well-made Swiss tool holds
micro-size drill bits from #61 (.039”) through #80 (.0135”). Can be used by hand or locked
drill size chart for Machinist’s
machine screw Pin Vise
in a drill press. Made of nickel plated solid brass. 2” long overall. $14.95
sizes from
E. #82110 Deluxe Pin Vise We’ve combined the comfort and ease of use of our Ball End 2-56 –1/4-28. Set
Pin Vise with the convenience of our Universal Chuck to provide a tool that’s sure to Made of hardened
become one of your favorites. Holds all drills, taps and bits with shank diameters from and ground
1/64” through 1/8”. Includes four collets: 0, 1/16, 3/32 and 1/8”. 4-3/4” long overall. carbon steel.
List $31.15 . . . Our Price $27.95 Overall size: 2-1/2”
F. #21104 Double End Pin Vise with reversible steel collets in each end. Hex head x 6-1/2”. $19.95
prevents rolling on bench. Includes 4 collets: 0, 1/16, 3/32 and 1/8”. Nickel plated brass.
4-1/8” long overall. $11.95 #14521 Micro Drill Bit Gauge quickly This well-made steel pin vise set features
identifies micro drill bits from no. 61 – knurled no-slip grips and a black oxide
G. #60348 Micro Drill for Delicate Hand Drilling Knurled ring slides up and down the no. 80. Easy-to-read markings indicate
spiral brass handle, causing the drill bit to turn. Drill holes in wood, plastic and thin brass finish to resist corrosion. Set holds drill
bit number and decimal inch size. Over- bits and wire from 0 to 3/16”. Handles are
in half the time as an ordinary pin vise. Swivel head lets you exert downward pressure all size: 3” x 1”. High-quality hardened
while drilling. Steel chuck holds bits from no. 61 through 80. A nicely made tool and a 3-1/2” to 4-1/4” long, 5/16” to 1/2” dia.
and ground carbon steel. $19.95
worthwhile addition to any modeler’s or miniaturist’s workshop. 4” long overall. $12.95 #81497 4-piece Pin Vise Set $16.95
H. #82416 The Rogers Drill Bit Set…Preferred by Experienced Modelers Ultra-sharp
high-speed steel drill bits, easy-to-read markings and convenient arrangement makes #85711 French-Style Pin Vise Set Beautifully crafted set of six pin vises with
this set very popular with experienced modelers. Includes twenty bits (nos. 61 through straight-knurled brass barrels for superior grip. Square collet nuts keep them from
80), drill stand and clear plastic dome for safe storage. List $36.00 . . . Our Price $29.95 rolling off your workbench. Lengths range from 3” to 5”. Includes 12 steel collets to
handle all sizes of drill bits and pins from
Spiral Push Drill for Miniature Applications 0 through .144” diameter. $25.95

Jeweler’s drill operates by pushing the handle up and down along the spiral bar. Fast,
easy, accurate and portable. Better than a pin vise for drilling multiple small holes in
hard-to-reach places. Steel collets take sizes from 0” to .059” (#53). Approx. 7-1/2” long.
#26101 Spiral Push Drill $24.95

Special Chucks Fit Cordless Screwdrivers for Slow Speed Drilling

Most drills and rotary tools spin too
Finger Drills for Delicate, Precise Drilling of Small Holes
Also works as an adapter for your
fast forworking in plastic and for tiny oversized drill chuck, quickly
detail work. These special chucks have converting it for precise
1/4” hex shanks that fit your slow drilling with micro size bits.
turning cordless screwdrivers and
cordless drills to solve this problem.
Take advantage of the quick-change
feature of the 1/4” shank...buy several
#82541 These drilling tools are ideal for those times when you need the maximum amount of
chucks and keep your most-used drill
bits ready to go. control for drilling in wood and plastic. And since each drill has its own handle, you won’t
waste time changing bits the way you have to when using a pin vise. All bits are high
#82541 Precision Micro Chuck for Cordless speed steel mounted in knurled, no-slip aluminum handles.
Screwdriver. Holds drill bits from #60 to #80. #82541
$12.95 #60931 Set of 4, #50 (.0700”), #52 (.0635”), #54 (.0550”) and #56 (.0465”) $16.95
3 or more $9.80 ea. #60932 Set of 4, #58 (.0420”), #60 (.0400”), #62 (.0380”) and #64 (.0360”) $16.95
#60933 Set of 4, #66 (.0330”), #68 (.0310”), #70 (.0280”) and #72 (.0250”) $17.95
#81852 Mini Chuck for Cordless Screwdriver.
Holds drill bits from #59 to 1/8”. $11.95 #60934 Set of 4, #74 (.0225”), #76 (.0200”), #78 (.0160”) and #80 (.0135”) $18.95
3 or more $9.75 ea. #81852 #60935 Set of 4, 1/64”, 1/32”, 3/64”, 1/16” $18.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 37
 POWER TOOLS HAND TOOLS SUPPLIES
#87362 MicroLux® Tapping Fixture holds taps perfectly square
to the base so threads are cut straight every time. The smooth
turning spindle and large knob provide the “feel” of hand tapping
needed to minimize breakage, and the cast iron base assures
stability for extra control. Precision chuck holds taps with shanks
1/64” to 1/4” diameter. Clearance under chuck: adjustable up to
5-1/2”. Distance from center of chuck to front of column: 4-3/4”.
Base includes 5/16” T-slots for mounting vises (#82546 Quick-Jaw
Vise, sold separately) and clamps. Tapping fixture can also be
used for hand-powered drilling and reaming, and is the perfect
drill press for plastic. List $130.00 . . . Our Price $119.95*

NEW DESIGN FEATURES INCLUDE:

#14153 14-piece Tap and Die Set includes tungsten Tighter tolerance bushings for higher
steel taps and 13/16” OD (outside diameter) adjustable #89240 Taps, Drills, & Dies, Inch & precision and greater accuracy,
dies in the following sizes: 0-80, 1-72, 2-56, 3-48, 4-40 Metric: Useful Information for the more ergonomic tightening knob,
and 6-32, plus die stock, tap handle and clear-top plastic Watch/Clock Maker and Model Maker, secondary column locking system
storage box. List $135.50 . . . Our Price $99.95 booklet by Robert Porter. $14.95 and on-board tool storage.

Hard-to-Find Ratchet Drive Tap Holder for The Finest, Most Versatile
Taps and Dies in Micro More Control Vise You’ll Ever Own
Miniature Sizes This professional-quality vise is the most
versatile you’ll ever own! Tilt, turn, and
rotate Panavise to any position with
Our ratchet action T handle tap holder one turn of the control knob. 2-1/2”
offers more control than conventional wide jaws open to 2-1/4” and close to
holders, especially on smaller size taps. And zero. Includes replaceable satin-finish
more control means fewer broken taps and nylon jaw liners. Vise head and base are
better threaded holes. Changes from left to made from pressure-cast aluminum
right to neutral at the flick of a lever. Made alloy with steel and brass inserts.
Die Taps of polished steel with hardened and Made in the USA.
Use these machine screw taps and dies for ground jaws. Holds square-head taps from #21123 Complete Panavise
models, clocks, instruments, watches and 00-90 through 6-32. List $54.99 . . . Our Price $49.95
business machines. Both taps (for putting #15126 Ratchet Drive Tap Holder $20.95 #21125 Extra Nylon Jaws $4.95
threads in a hole made with tap drill) and
#21124 Optional Steel Jaws $13.95
dies (for putting threads on a rod) are #21123
high speed steel. Dies are 13/16” outside
diameter and are adjustable for thread fit Panavise Bench Clamp Mount
allowance. See our website for individual taps and When ultimate Lets you move your Panavise to different locations. Securely mounts to
dies, tap drills and clearance drills. precision is a requirement edge of workbench, table or counter up to 3-1/2” thick. Mounting
Tap Sets for your micro-miniature screws included.
project, nothing beats the #21126 Bench Clamp Mount $49.95
#87697 Four-piece Micro accuracy of this premium
quality square-drive #21127 Panavise Wide Opening Head opens a full 6”
Size Tap Set $29.95 with jaw width of 1-3/4”. Satin black oxide finish
00-90 HSS
00-90, 0-80, 1-72 H1 tap. greatly reduces glare. Reversible and replaceable
and 2-56 neoprene jaw pads have molded ribs for firm, yet
#86636T gentle holding power. Designed for use with #21123
List $45.00 Panavise or #82418 Panavise Base only (available
Our Price separately). $49.95
$19.95
#20129 Five-piece Mini Tap wrench and hardware
available separately
Size Tap Set $29.95 A Good Quality
2-56, 3-48, 4-40, All-Position Vise
6-32 and 8-32 The “Crab” Holds for Less Money
Odd-Shaped The head rotates 360° and also tilts from 0 to
Parts 90°, letting you position your work at the most
accessible angle. All movements are locked by
a single lever. The vise clamps to the edge
#82327 Five-piece
of your workbench (up to 2-1/8” thick) for
Metric Tap Set
Max. distance portability. Made of die-cast aluminum and
$39.95 Individually
between pins: 1-3/4”. nickel-plated steel. Jaws are 3” wide, open
adjustable to 2” and feature slide-off rubber pads. Overall
M1.6x.35 pins grip Includes a removable,
non-scratch rubber base pad. height above workbench is 6-1/4” (in vertical
M2.0x.40 round and position). A great value compared to other
M2.5x.45 odd-shaped parts while you work. Steel all-position vises.
M3.0x.50 and M4.0x.70 “feet” located on the bottom surface can
be held in a vise while you drill, tap, grind #81314 All-Position Vise $36.45
Tap and Die Wrenches and file. Removable red plastic bushings
cover steel pins. Made of steel.
B Mini jeweler’s vise holds small parts while
#86517 Crab Parts Holder $18.95 Precision working in the hand or on the workbench.
2 or more $15.95 ea.
A Brass Mini Vise Brass jaws are held in perfect alignment by
metal guide pins, and the fine-pitch adjust-
Got Screws? ment knob lets you dial in just the force you
need to grip parts securely. Grooves in the
#83438
jaw face hold round items in both horizontal
1,000-piece Metric
A. #20130 Tap Wrench $6.95 and vertical positions. Jaws are 1-1/2” wide;
Micro Screw Set
B. #14152 13/16” Die Stock (handle) open to 1-1/2”. Closes to zero.
$24.95
$9.95 #83441 Precision Brass Mini Vise $20.95

38 • ORDER TOLL FREE 1-800-225-1066 *Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance.
 Follow us on HAND TOOLS NEW ITEMS
Well-Made Miniature Professional Quality Machine Forms Micro Punch Set is Ideal for
Machinist’s Vise at an Smooth Curves in Wood, Plastic and Metal Making Mini Gauges, Lenses,
Economical Price There’s never been a better, easier-to- Gaskets, Washers and More!
use tool for making perfect bends in
ship model planking. Works on wood
strips up to 2-1/4” wide and 1/8”
thick…even plywood! But that’s not
all: It will also make smooth, no kink
curves in plastic and metal strip stock
and in 1/16”, 3/32” and 1/8” tubing and
soft wire. Simply set the rollers for the
desired radius and turn the crank to
feed and form the material. You can
even create perfect radius curves in
model railroad rail from N through
Made O scales. Precision machined of Toolmaker-grade micro punch set makes
in Japan aluminum with steel gears. Rollers are perfect miniature disks from plastic, wood
1/2” diameter by 3” long. veneer, cloth – even metal! And it punches
Our clamp-on miniature machinist’s vise tiny holes in materials virtually impossible
#81356 Bending Machine
holds all types of small components to drill: thin metal sheet, cork, rubber,
List $199.95 . . . Our Price $149.95
securely. Smooth jaws won’t mar your vinyl, and more. Use it on pre-printed
work the way serrated-jaw vises can. Made paper gauge-faces and clear acetate sheet
of cast iron with machined jaw faces and
Make Perfect Bends, Even in Hard Music Wire to create the most realistic miniature
twin guide rods to keep jaws parallel. Wire, rod and strip bender makes instrument panels you’ve ever seen. Also
Includes a handy anvil surface for ham- angles, loops, eyes, U, C and S shapes makes custom size washers and miniature
mering. Clamps to benches up to 1” thick. in brass, copper, and steel, quickly and gaskets. Includes 9 precisely ground and
Jaws are 1-1/2” wide with 1-1/2” capacity. easily. Even bends the hardest music hardened steel punches ranging from 1.0
wire up to 1/8” diameter. Made of steel mm (0.039”) to 5.0 mm (0.197”) dia. in 0.5
#60297 Machinist’s Vise $34.95
with rust resistant black oxide finish mm (0.0197”) increments. Approx. overall
and hardened radius pins. 7” long arm size: 1-1/4” x 2-5/8”.
Non-Marring, Nylon Head and rubber grip gives extra leverage #83513 Micro Punch Set $59.95
Metal-Forming for tough materials. Must be locked in
Hammer & Mallet a vise during use.
Vise not
Precision-Made
#60346 Wire, Rod and Strip Bender
#90148 $29.95 included Mini Mallet with Muscle
#90147
Mini Bending Brake Produces
Sharp, Clean Bends in Metal This is the kind
A press bending brake for brass or other of mallet a professional
light sheet metals. Makes bends up to 90˚ toolmaker would fabricate for
(depending on how far you tighten the press himself. The fully-machined 4 oz head
#90148 Non-Marring Nylon Wedge / screws). Will bend up to .020” half hard includes screw-on tips with 1/2” dia. brass
Domed Hammer This dual-purpose, non- brass, 3” wide. Can also be used on plastic. and nylon inserts for no-mar hammering.
marring solid nylon mallet features a Adjustable depth guide permits duplication Comfortably contoured hardwood handle
domed side for dapping and forming of bend placement. Includes reversible steel is secured with a screw fastener for wobble-
large areas of sheet metal, and a wedge- die and instructions. A beautifully made tool. free accuracy. Excellent for use with the
shaped side for bending sheet metal and Overall size: 4” wide x 1-1/2” deep x 4” high. Punch Set above. 9” long.
wire. Solid lacquered wooden handle is #16101 Bending Brake $39.95 #83434 Brass/Nylon Mallet
contoured for extra grip. Circular domed $24.95
head is 1-1/4” diameter with the wedge #83435 Set of extra tips
end tapering to a rounded-over 1/4” wide Revolving Punch Cuts Perfect Holes (one brass; one nylon) $8.95
edge. 10-1/2” long overall. $13.95 Revolving turret-head punch cuts easily
#90147 Non-Marring Nylon Head Mallet through leather, plastic, canvas, card- Hardwood Chest Keeps
This double-sided 9-1/2” long mallet has a board…even thin wood veneers. Cuts
6 oz nylon head that provides the extra bit 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm
Pliers and Other Micro Tools
of force needed when forming metals and and 4.5 mm holes. Blackened steel with Close at Hand
materials without damaging them. Solid tempered steel punches, brass anvil
lacquered wooden handle is contoured in and vinyl grip.
2 places to fit securely in the hand. Head is #82524 Hole Punch $24.95
1” in diameter and 3-1/2” long. $13.95
Jig for Precise Wire Forming
Economical Strip Intricate wire forms can be easily
and Wire shaped with this jeweler’s tool. The
base has 326 holes drilled 1/4” apart on
Bending a diamond grid into which you place
Jig pins in the pattern you need. Wrap wire
around these pins to make your wire
form. 1/4” thick clear acrylic base lets
you position a pattern underneath for
easy pin placement. Includes 25 pins
.078” diameter x 1” long. Base is 4” x 6”. Unique design allows you to store seven
A nice little tool for making bends in wire pliers in the space of two. The open tray
#85135 Wire Forming Jig $20.95
and metal strip stock. Steel pins are moved and drawer will also hold dozens of other
to different locations in the cast aluminum small tools or parts conveniently within
block depending on the shape you need. No-Kink Benders for Small Tubing reach. Made of sanded and lacquered
Includes triangular shape on one end Make smooth, no-kink bends in small diameter hardwood with box joint corners and
for making bends less than 90° and a 1/2” tubing. 5-piece set bends 1/16”, 3/32”, 1/8”, 5/32” mahogany plywood dividers. Approx. 6”
radius shape on the other end for large and 3/16” outside diameters. Zinc plated steel. wide x 4” high x 8” deep.
smooth curves. #60360 #60284 Hardwood Plier/Tool Chest
#60401 Wire/Strip Bending Jig $11.95 Tubing Bender Set $7.95 List $38.95 . . . Our Price $24.95

See our website for a video of this item in use 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 39
 POWER TOOLS SUPPLIES
Resistance Soldering at an Affordable Price! Resistance Soldering Outfits
Easy-to-use MicroLux®
Resistance Soldering Unit from American Beauty
Tweezer
generates heat only at the Handpiece
joint, so that already-
soldered parts won’t fall off
while adding new ones.
How it works: With the
Plier
ground clip connected, Handpiece
place the carbon electrode
on the tip of the handpiece
in contact with the part to
be soldered and step on the
foot switch. The transformer Single
Electrode Handpiece
passes a safe, low-voltage
electrical current through
the part, which heats it to
Includes everything soldering temperature
shown here! within seconds. Apply the Includes
solder, then release the foot On/Off Foot Switch
switch to instantly cool for Use for soldering power feeds to model railroad track (the fast, pinpoint concentration of
a strong, durable joint. heat won’t melt nearby plastic ties), brass trestle construction, turnout fabrication, rail joining,
Includes 63 watt* brass scratch-built items, ship model railings, fittings and more. Works on any material that
transformer with dual power can be soldered. Use the tweezer handpiece for delicate work: fine wire, chain, etched
outputs for heavy- and light- detail parts, railroad rail. The plier handpiece is for larger parts: castings, brass structural
weight parts, handpiece, 6 shapes, etc. American Beauty brand made in the USA to heavy-duty industrial standards.
carbon electrodes, ground
lead, on/off foot switch,
Each set includes 120VAC* power supply, handpiece and foot switch
and instructions. Item # Power Handpiece Type List Price Our Price
#85522 MicroLux® Resistance Soldering Unit with Single Electrode Handpiece $174.95 #85075A 100 watts Single Electrode $550.00 $459.95
*Since a resistance soldering unit concentrates heat at the joint, it will heat larger work than will a conventional soldering iron of the same power.
#87726 MicroLux® Resistance Soldering Super Value Package includes soldering unit set, #80417A 100 watts Tweezer $550.00 $459.95
soldering tweezer, stand, Stay Brite silver solder and flux, 6” x 6” soldering pad, T-pins and #80462A 250 watts Tweezer $650.00 $524.95
metal assortment. Value $307.14 Super Buy $199.95
#81561A 250 watts Plier $700.00 $524.95
#87726K Resistance Soldering Accessory Value Package includes everything in the set
above except the resistance soldering unit. Value $140.19 Super Buy $119.95 *220VAC versions are available at www.micromark.com
#80765 Tweezer Handpiece only with .078” diameter pointed electrodes $159.95
#86589 MicroLux® Soldering Tweezer holds tiny parts together #80418 Extra Electrodes for Tweezer Handpiece (6) $24.95
while applying gentle isolated heat. Works great on a wide
#81527 Plier Handpiece only with 1/4” square shapable carbon electrodes $199.95
variety of materials. Designed for use at the low power
setting of the MicroLux® Resistance Soldering Unit. #81559 Extra Electrodes for Plier Handpiece (2) $29.95
List $80.00 . . . Our Price $59.95 #80419A Single Electrode Handpiece with 48” cord plus ground lead with clip and 60”
cord. Use for applications that are not suitable for tweezer or plier use. Clip is attached
#85824 Grounding Vise for to one part and electrode is touched to the other. $159.95
Resistance Soldering Unit #80420 Extra Electrodes for Single Electrode Handpiece (6) $39.95
is the perfect “workstation”
for resistance soldering.
Universal vise with heavy, Iso-Tip Cordless Soldering Iron
cast-iron base holds your Now you can perform soldering operations away from your workbench
workpiece securely while without power cords that weigh you down or get tangled. Convenient
you solder. 3-foot long cable recharging stand keeps your iron easy to reach, on constant charge and
connects directly to your ready to solder. Recharges completely in 3 to 4-1/2 hours; a partially
resistance soldering unit; discharged battery returns to full capacity in less than one hour. Set
eliminates the clip lead. includes cordless soldering iron, recharging stand, work light and
Repositionable vise pins “lock-off” switch, one fine tip (our #50314), 1 heavy duty tip (our
securely hold objects of any #50315) and instruction booklet.
shape. Base diameter: 6 “. Power: 25 watts; maximum temperature: 900˚F
List $99.95 Our Price $69.95 #50313 Iso-Tip Cordless Soldering Iron $59.95

The Easy Way to UNsolder Stay-BriteTM Silver Solder Extra Soldering Tips – $7.95 each
TM #50317 Micro Tip
Stay-Brite
premium silver #50314 Fine Tip
solder works on #50315 Heavy Duty Tip (high wattage)
all metals except
aluminum (even
stainless steel and #87467 3-in-1 Pen Torch You’ll appreciate the precise control this mini
cast iron). It flows torch gives you for delicate soldering jobs. The pin-point torch flame
freely and smoothly can be adjusted from 3/8” to over 1/2” in length and reach up to a
and has over twice maximum temperature of 2450˚F. Includes a soldering attach-
the tensile strength ment that converts your torch to a cordless soldering iron in
Place our desoldering braid in contact seconds, with a tip temperature up to 750˚F. Torch may
with the joint you want to unsolder and of regular solder.
also be converted to a Hot Air Blower. Burns up to
heat with your soldering iron. The flux- Melts and flows at only 430°F, providing
1 hour as a torch, 2 hours as a soldering iron. Torch
impregnated braid will quickly and safely strength without distortion. Includes a
is 7” long, (8-1/4” with soldering head attached)
draw the solder out of the joint. You can 1/2 oz coil of solder and 1/2 oz bottle of
with 3/4” diameter barrel. Fills easily
then separate and renew the joint easily. flux. Can be used with resistance soldering from a standard butane can (sold Torch includes
Works on mechanical assemblies and equipment, soldering iron or torch. Stay- separately). List $29.95 Price $24.95 integrated flip-down
electronic circuitry. Supplied in a 0.100” Brite is lead free. (Ships by ground to 48 stand and soldering attachment
#60909 Butane Fuel, 42 grams
wide x 25 foot-long roll. contiguous U.S. only.)
(ground ship to 48 contiguous U.S. only) $6.95 with 2 pointed soldering heads.
#85289 Desoldering Braid $23.95 #80822 Stay-Brite Silver Solder $24.95

40 • ORDER TOLL FREE 1-800-225-1066 • OUTSIDE USA CALL 1-908-464-2984 See our website for a video of this item in use
 Follow us on SUPPLIES HAND TOOLS POWER TOOLS NEW ITEMS

Variable Temperature Double-Hinged, Extended-Reach Hemostats

These extra-long 11” precision tools are twice as long as
Electronic Soldering Station their cousins below, providing amazing access to grab,
This high-performance Weller Soldering locate, remove, and work on previously unreachable
Station does the work of a standard gun components and assemblies.
or iron without the high cost of an
industrial-type soldering tool! You can
vary the power from 5 to 40 watts
(up to 900˚F) to solder everything At less than 7/16” at their widest when closed, these
from fine electric wire to brass rod. incredible tools can not only reach into small holes and
Includes iron with cushioned foam interior spaces, they extend over 5” deep with exceptional
#81014 grip and #81017 standard tip, on/off control. Double-hinged action opens the tips of the serrated
switch with power-on light, safety jaws over 1” wide while inside even the most confined areas.
guard iron holder, and sponge pad Made of surgical stainless steel and black powder-coated.
for tip cleaning.
#81014 Soldering Station
List $99.00 . . . Our Price $84.95 #89931 Double-Hinged Hemostat, Straight Tip $47.95
#89932 Double-Hinged Hemostat, 30˚ Curved Tip $47.95
Soldering Iron Tips – $9.95 each #90108 Double-Hinged Hemostat Set (1 each of above) $87.95
#81015 1/32” Micro Tip #81016 1/16” Mini Tip #81017 1/8” Standard Tip
Use these small, light duty hemostats as
Variable Temperature Electronic super-slim needle nose pliers, clamps, heat
Soldering Station – Economy Version sinks, vises, etc. Quality box joint construc-
#84383 Economy version…all the tion. 5” long. Serrated jaws. $10.95 ea.
features of the Weller unit at a low price. 2 or more, same no., stainless only $9.50 ea.
List $39.95 . . . Our Price $29.95 #21110 Straight Tip, stainless steel
#21111 Curved Tip, stainless steel
#84384
#88583 Straight Tip, titanium plated $14.95
Extra tips for
economy #88584 Curved Tip, titanium plated $15.95
model (pkg.
of 3) $7.95 #87864 Splice-It-Easy Soldering Tweezer Specially designed
#84385 Extra sponges for either model tweezer is ideal for splicing wires faster, easier and cleaner
(package of 3) $5.95 #84383 than ever before. A simple one-handed pinch to lock or single
thumb-flick to unlock is all it takes for this amazing “third
hand” to do its job. Just locate your splice in the center of
Soldering Tweezers with Built-in Stands Hold Wires for You the 1/2” x 5/8” window and let the tool’s serrated jaws and
clever locking mechanism do the rest. Made of solder-resistant
stainless steel. Holds stranded and solid wire from #28 to
#18. Overall length: 8-1/8”. List $26.00 . . . Our Price $19.95

#85151
#88576

Self-closing tweezers include built-in 4-sided stands which hold workpieces and wires for Tix – The Hardest Soft Solder on Earth
you, elevating them above the benchtop or soldering pad and keeping both hands free #17110 Tix Solder Easy flowing solder melts at only 275°F and yet has the
for you to solder. Fiber handles protect your fingers from residual heat. Serrated steel tips holding power of 4,300 lbs. per square inch. Adheres to all solderable metals
open to 1”. Overall length approx. 6-1/2”. Use several tweezers and different combinations and works with soldering iron, gun or torch. Will not tarnish. The jeweler’s
to hold parts in perfect alignment and just where you want them while soldering. choice for years. Package of twenty 3” long sticks. $18.95
#85151 Soldering Tweezer with Stand $13.95 2 or more $10.95 ea. #17111X2 Tix Flux
#88576 Double Soldering Tweezer with Stand A Micro-Mark Exclusive! $24.95 Cleans and prepares metal for best solder adhesion.
Ceramic Fiber Soldering Pads are perfect for keeping small Works with any soft solder. Washes off with water.
components together as you solder. Half-inch thick pads Note: Not for use with printed circuit boards.
withstand temperatures up to 2,280°F, yet are soft enough Two 1/2 oz bottles. $8.95
to accept our T-pins (sold below) to hold parts securely. #17112X2 Tix Anti-Flux
#70219 Soldering Pad, 6” x 6” $15.95 Prevents solder from flowing to unwanted areas.
#80751 Soldering Pad, 6” x 12” $34.95 Brushes on easily. Two 1/2 oz bottles. $8.95
#70220 Soldering Pad, 12” x 12” $29.95
#14318 T-pins, package of 50 $5.95
#89083 Tix Soldering Rack by MicroLux®
is custom-made to hold two sets of Tix Soldering
Sticks, Tix Flux and Tix Anti Flux (not included;
#60393
available separately). Rack not only keeps
Cross-Locking Heat Sink
Tix products neat and organized, it helps
Tweezer with Slotted Tips
prevent the small bottles from tipping
#60664 Solder-It Soldering Paste Just holds small diameter
over during use. Rack measures 4-3/4”
apply a small amount from the convenient, hook-up wire in place and
long x 3-3/4” deep; 2-1/4” high. Makes
no waste syringe and heat with soldering draws heat away from the
a great companion to our #88700
iron or torch. The paste bubbles away, insulation so it won’t melt.
MicroLux® Paint Rack and #88879
leaving a clean, bright, hard joint that Keeps soldering jobs neat
MicroLux® Gluing Station (available
won’t tarnish. Has over twice the tensile while preventing short
separately). Assembly required. $14.99
strength of regular solder. Flows smoothly circuits and burned fingers.
at just 430°F. Solders all metals, except alu- A half-round slot milled
minum, zinc and pot metals (even solders in both jaws holds wire #60381 Soldering Iron Stand
stainless steel). Ideal for jewelry, models, securely. Made of stainless Chrome-plated coils with a 3-1/4” x 5” enameled steel base.
autos, electrical connections and more. steel with heat resistant Fits our #17107 Soldering Iron/Knife and other soldering irons
Contains no lead or corrosive materials. grips. 6” long. $14.95 and pen-type torches with barrels up to 3/4”. 5-1/2” high.
7.1 grams. $11.95 $11.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 41
 NEW ITEMS POWER TOOLS HAND TOOLS SUPPLIES

General Purpose Scratch Brush Burnmaster® Hawk

Solder Wire for Electronic Cleans Metal for High Performance
and Model Assembly Soldering Wood Burning Set
Mastercarver’s® set has all the
essentials needed for
quality wood
burning. Set
includes the
Burnmaster®
The Scratch Brush easily cleans away Hawk 1-Port
oxidation, dust and paint from brass, steel, wood burning
copper, nickel silver and other solderable power supply,
metals so that solder sticks properly. pen patch cord /
Retractable metal bristles adjust like a adapter set plus the
mechanical pencil so that Scratch Brush Burnmaster® wood
Flux-coated for easy flow and maximum can reach where larger brushes can’t. burning pen and full
adhesion, and only 1 mm (.039”) diameter selection of 10-burning
for good control, this is the preferred tips and can accept most
solder for electronic assembly. Works for any type of pen. Made in USA.
model assembly as well…especially on #82466A Scratch Brush $15.95 #88326 110V Burnmaster® Hawk,
brass and copper. Alloy is 40% tin/60% #82467 Brush Refills (3) $5.95 Pen and 10-Tips Set $209.95
lead…an economic alternative to higher
tin alloys, and with a wide melting range
of 361˚– 460˚ F. Sold as a set of 3 rolls; total
Miniature Brushes Get #88327 5-Tip Detail and Shading Set includes 5 unique
weight 300 grams (10.6 ounces). into the Tightest Corners and versatile wood burning tips not included with the
Burnmaster standard 10 tip set. $59.95
#86295 Flux-coated Solder (300 g) $21.95 #81850

Magiclasp Forceps for

A B Mini Vises Hold Odd Shapes
Delicate Work in
Gently, Yet Securely
Confined Areas #14259
A. #85939 Jumbo Mini Vise
Unusual brushes are excellent for removing Jaws: 2-1/2” wide x 1/2” deep;
rust and dirt from smallest parts and for 1-1/2” capacity. 16 pin holes.
scratching metal and glossy plastic for 4-1/2” x 2-1/2” base with 4 holes.
better solder and glue adhesion. Bristles $24.95
feed out like a mechanical pencil.
B. #86816 Mini Vise
#14258 Brass Bristle Brush $11.95 Jaws: 1-3/4” wide x 3/8” deep;
#14259 Fiberglass Bristle Brush $9.95 1” capacity. 12 pin holes. 3” x
Magiclasp Forceps have a special in-line #14342 Two-piece Set, one each of above 1-1/2” base with 2 holes. $22.95
latching system and a petite outline that List $22.95 . . . Our Price $19.95 C. #80769 Little Mini Vise
gives you perfect control over grasping, Jaws: 1-3/4” wide x 1/2” deep;
#14343 Brass Refills, 2/pkg. $6.95
latching and releasing in tight locations
#14344 Fiberglass Refills, 2/pkg. $5.95
C 3/4” capacity. 12 pin holes.
(smooth tips are only 1/16” wide!). Made of $15.95
satin stainless steel. 5-1/2” long x 3/8” wide #81850 Ultra Micro Fiberglass Brush $9.95
with no-slip grips and integral leaf springs. #82027 Ultra Micro Fiberglass Organize Your Workbench
#82488 Magiclasp Forceps $19.95 Refills, 12/pkg. $12.95
in Style
Third Hands
Keeps Hands Free #86173
Benchtop
Organizer
Nicely
finished
wood
cabinet has pockets,
bins and drawers that hold
tools, accessories, rotary bits, glue
containers and small parts. Includes 2 rods for
holding wire, ribbon, string and solder spools. A great complement
#21120 #84453 to any work area. 18-1/2” long x 4-3/4” deep x 7-1/2” high. $52.95
#90442 Organizer Genie™ This modular system
provides a unique way of keeping tools neat and
organized. Far more versatile than traditional
pegboards, Organizer Genie can be
#21120 Triple Grip Third Hand Used by jewelers, model builders, miniaturists and
configured in thousands of
electronic hobbyists. Keeps your hands free for soldering, gluing and positioning while
different ways to suit
work is held firmly at any angle required. Has 3 alligator-type spring clamps mounted in
your needs.
ball joints for flexibility. Nickel plated steel with heavy iron base for no-tip stability. $9.95
#84453 Lighted Third Hand with Magnifier includes 2 alligator-type spring clamps,
2-1/4” dia. 3x magnifier, and miniature goose-neck LED lamp.
List $23.00 . . . Our Price $19.95
Set
includes four
Tools are
Model Maker’s “T” Pins Used by model builders to hold parts together 11” x 7.7” x 0.47”
not included.
while soldering or gluing. Also handy for doll- blue pegboard panels, Image shows only
house miniatures and all types of fabric crafts. 36 universal clips, and 12 each 2 of the 4 panels
“T” head makes pushing easy. Nickel-plated 1/4”, 3/8” and 1/2” drive socket holders. included in the set.
steel. 1-1/4” long x .035” dia. Package of 50 pins. Attach them to the wall, place them in drawers, #90442 Organizer
#14318 “T” Pins $5.95 use them on the workbench, etc. Infinitely expandable! Genie™ $62.95

42 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 Follow us on SUPPLIES HAND TOOLS POWER TOOLS NEW ITEMS
Micro-Precision Wire Stripper Premium-Quality Wire Stripper
#90338 Jokari Micro-Precision Stripping #90337 Jokari Secura 2K Wire Stripper is
Tool is ideal for fast, safe and precise strip- an ergonomic, automatic wire stripper
ping of the delicate wires and strands used which is suitable for wires from 0.2 – 6.0
in electronic, telecommunications and mm² (AWG 24 – 10). It ensures speedy and
modeling applications. Features include an precise stripping of wires, even where
adjustable length stopper and integrated access is difficult. No diameter adjustments
cutter for cable diameters of up to 0.8 mm are required. Features include plier-handle
Ø. The tool has a lightweight design and is design with soft, non-slip safety grip,
great for PVC, Teflon, Kynar, Tefzel, Mylar exchangeable blades, and an integral wire
and other wire types with diameters AWG cutter for diameters of up to 2.5 mm² and
30, 28, 26, 24, 22, 20 (0.25, 0.30, 0.40, 0.50, a built-in length stopper which is adjustable
0.60, 0.80 mm Ø). Made in Germany. $46.95 from 6 to 18 mm. Made in Germany. $64.95

Great for positioning, inserting Grab Small Items Shrink Tubing Protects Wire Stripper Automatically
and starting mini screws, nuts
and other small parts. with the Push of a Button Electrical Connections Adjusts to Any Wire Size
#83544

Hold, grip and

grab the widest variety
of small items imaginable!

#88396 4-Piece Gripster Tool Set

Press the top of these unique tools and 2, 3, 4 or 5 slim, stainless steel prongs emerge
from the tip. Release pressure and the prongs close around the object, gripping it tightly.
Set includes four Gripsters and fitted wood storage box. $29.95 Heat Shrink tubing makes wiring jobs Heavy-duty wire
look neat and prevents shorting. After stripper automati-
Reamers…Handy Tools for soldering or crimping the connection, slip cally adjusts for
Enlarging and Deburring Hard-to-Find the tubing over the joint and use a heat wire sizes from
Wire Stripper gun to shrink the plastic tubing over the #10 through #26.
Holes in Any Material joint. 127-piece assortment includes 7 sizes Use for thin wire
for Micro from 1/16” dia. x 1-1/2” long to 1/2” dia. x found in model railroads
Thin Wire 3-3/8” long. Trim to length with scissor or and R/C models, as well as heavier house-
wire cutter. Includes compartmented hold and automotive wire. It’s faster, easier
storage box. and safer to use than other kinds of strip-
#84455 pers. Also cuts wire, crimps terminals and
#83544 Heat Shrink Tubing
Diamond Assortment with Storage Box $8.95 even strips twin wire cable. Made of steel
reamer set 3 or more $6.45 ea. with vinyl coated handles. 8-1/4” long.
in 4 different #81317 Wire Stripper $19.95
tapers includes
comfortable-to-use
wood handle with integral collet that holds
Mini Heat Gun is the
3.0 mm diameter shanks. Deburrs and Perfect Size for Hobby
fine-tunes holes in even the hardest of and Craft Use
materials. Handle is 5” long overall.
#85219
#84455 Diamond Reamer and Handle
Set $14.95 #85219 72-piece Heat Shrink Tubing
Assortment includes 24 each of 1 mm
#84456
(.039”), 2 mm (.078”) and 3 mm (.117”)
diameter tubes. All are 160 mm (6-1/4”)
A beautifully long. Trim to length with scissor or wire
made, professional cutter. $9.95
quality wire stripper/
cutter for fine wire sizes
used in electronic, R/C and Liquid Mini heat gun generates a hot, but gentle
model railroad work. Strips AWG wire Electrical air stream that gets the job done without
#84456 Gently-tapered diamond reamers sizes #20 to #30. Tempered steel with blowing parts off your workbench. Com-
with fine diamond grit are used with above cushion grip handles and spring Tape pact and lightweight, it includes a built-in
handle for delicate control of reaming holes return. 6” long. Handle style may vary. stand, on/off switch and 6’ line cord that
to size. Measures .032” dia. at tip; .072” dia. #14221 Micro-Size Wire Stripper plugs into standard 120VAC outlet. Heats
near shank. 2” long overall. Shank diameter $24.95 virtually instantaneously. Use for shrinking
3.0 mm. Package of 10. $12.95 electrical insulation, paint removal and
more. Max. temp: 650˚; 360 watts, 3 amps.
#84433 Mini Heat Gun
Hard Wire and Cable Cutter Cuts List $30.00 . . . Our Price $24.95
Keeps Connections Moisture-Proof and Safe
Cleanly…Eliminates Frayed Ends Liquid rubber coating insulates electrical #82611
Sharp, hardened jaws and 15-to-1 leverage connections and seals out corrosion- Micro Switches
combine to produce a powerful shearing action causing moisture. Use on control panels, Single-pole,
that cleanly cuts music and spring wire up to model railroad wiring, lighting circuits, PC double-throw
1/16” diameter and wire rope (control boards, around the house and on auto, Shown at
contacts switch
cable and picture-hanging wire) up to truck and boat wiring. Keeps terminal actual size
power from one
3/16” diameter without frayed ends. screws from vibrating loose. Just brush on terminal to another, or make or break a
Blackened steel handle has return and let dry. Won’t crack, peel or harden. circuit depending on hookup. Small size
spring and vinyl grips. 7-1/2” long. 4 fluid oz can with brush applicator cap. (only 1/4” x 1/2” x 3/4”) to fit in tight
#82477 Hard Wire Cutter $19.95 Black color. (Ships by ground to 48 contiguous U.S. only.) places. Contacts rated 1 amp. Includes
#84902 Liquid Electrical Tape $11.95 wiring diagrams. 10-pack. $17.95

See our website for a video of this item in use 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 43
 NEW ITEMS POWER TOOLS HAND TOOLS

A Variable Speed Band Saw Create

Cuts Intricate Shapes in Metal, Professional-
Wood, Plastic, Stone, Bone, Quality Detail
Tile, Glass and More! with the
Band saws designed for cutting wood run Micro-Pro™
too fast to cut metal, and plastic comes Champion
away as a gooey mess. The electronic
speed control on our professional quality Grinder Set
band saw lets you dial-in the exact speed
you need to cut these materials. Make
designs you never dreamed possible…
cutting metal is so smooth and fast you’ll
complete your work in just 1/10th the
time of other methods. You can even
stack workpieces to make exact dupli-
cates in one pass. And, with the optional Higher carving speeds give superior carving results and smoother texturing,
diamond blade and cooling system plus improved detailing, stoning and feathering. With an 11% increase in
sold below, you can easily cut torque and variable speed up to 46,000 rpm, Micro-Pro™ Champion has the
intricate designs in glass, speed, power, superior features and quality you want, priced far less than
tile and other hard materials. competitors! Features include: control box with dial-type control knob,
Overall size (band saw only): 15” lighted power indicator, on/off switch, overload protection, 6-burr storage
wide x 20” high x 11” deep; weighs holes, 110/220 volt selector switch, and forward/reverse switch. Handpiece
13 lbs. Includes one .180” wide x .031” features a high-torque, fan-cooled micro motor, sealed NSK ball bearings,
B kerf x 14 tpi blade, adjustable ball bearing 6’ cable and solid grip turn-ring for hands-free bit changes. Handpiece is
6” long x 5/8” to 1” diameter and weighs only 7.3 oz.
blade guide and instructions. Made in
Japan. Micro-Pro™ Champion Set includes: handpiece, 1/8” (3.18 mm) and 3/32

A. #82203 Variable Speed Band Saw (2.3 mm) quick-change collets, variable speed power supply, table-top and
List $430.00 . . . Our Price $329.95 box-mounted handpiece holders, long-life motor brushes, instructions, and
1-year manufacturer’s warranty. Note: burrs are not included.
Use our website shopping cart to calculate freight
charge for shipments outside 48 contiguous U.S., #88359 Mastercarver® Micro-Pro™ Champion Grinder Set Super Buy $241.95
or call our order line for assistance.

There’s No Clean Like

Band Saw Features: • 425 to 650 ft/min variable blade speed. C&K
• Sturdy cast-aluminum frame. • Cutting capacities: softwood 3”, hardwood 2”, an Ultrasonic Clean
• Twin 6-3/8” dia. drive wheels steel 3/8”, aluminum 3/4”, brass/copper 5/8”,
mounted in ball-bearings. plastic 1-1/4”.
• 7-3/4” x 7-3/4” aluminum table tilts • High torque DC motor and moisture-sealed
between 0° to 45° for bevel cuts. electronics; plugs into standard 120VAC outlet.
• 6” throat depth, 3” throat height. • Adjustable miter gauge.

Optional Band Saw Accessories and Blades

B. #84517 Rip Fence for Band Saw Attaches to table with
two thumb screws. List $29.95 . . . Our Price $24.95
C. #82211 Cooling System for Band Saw
Required when cutting stone, tile, ceramics, gems, minerals,
glass and other hard materials. Reservoir and adjustable valve
dispense water directly on the cut to lubricate and cool the #90492 ISonic Personal Mini Ultrasonic Cleaner is the first DC-powered
blade, preventing overheating and premature blade failure. model that reaches 25W! With sweeping full-wave frequency 36K to 41K Hz,
Includes reservoir, valve, tubing, gasket, 12” x 16” collection it has double the cleaning efficiency of traditional half-wave ultrasonic
tray and hardware. $64.95 cleaners. It may be small, but it gets the job done right. $59.95
#90493 ISonic Digital Ultrasonic Cleaner With a detachable power cord,
a built-in cooling fan, digital timer, and touch-sensing controls, “the world’s
smallest commercial ultrasonic cleaner” maintains its portability and power,
operating at 110V/55W and 40,000Hz. The elongated tank capacity is 0.8 L
(0.85 qt.) and measures 7.1” x 3.4” x 2.3”. An integrated beaker holder with a
stainless-steel beaker provides a great way to clean smaller items, and also
allows cleaning of multiple items simultaneously by using the main tank and
D E F G H J the beaker at the same time, even with different solutions. $149.95
D. #82204 Blade .138” wide; .031” kerf; 14 tpi $24.95
E. #82205 Blade .138” wide; .025” kerf; 24 tpi $24.95 A New “Twist” for this Unique Plier
F. #82206 Blade .180” wide; .031” kerf; 14 tpi $24.95 Primarily used to quickly and easily twist any type of
wire up to 18 gauge for aviation and automotive
G. #82207 Blade .180” wide; .025” kerf; 24 tpi $24.95
applications, this plier is also excellent for
H. #82208 Blade .250” wide; .031” kerf; 24 tpi List $39.95 . . . Our Price $34.95 model building and jewelry design. Use
J. #82209 Diamond Blade for cutting stone, tile, glass, etc. Even cuts bone with amazing precision! it to transform ordinary wire and slim
Must be used with cooling system sold above (.125” wide x .025” kerf ) $129.95 sheet stock into many shapes and
#88507 Bi-Metal Blade (steel alloy band with high speed steel teeth) .203” wide; .032” kerf; 10 to different sizes of eye pins, bezel
14 varying tpi for cutting steel, non-ferrous metals and stainless steel. $39.95 rings and more. Approx. 9” long,
#88516 Narrow Blade is only 1.3 mm wide with a .44 mm kerf; 10 tpi. Turns your Band Saw into a with diagonal serrated tips
scroll saw for the tightest, most intricate cuts in wood, plastics and non-ferrous metals. $29.95 and internal cutter, plus
.138” wide blades cut curves down to 3/8” radius; .180” wide blades down to 3/4” radius; .250” wide blades down to 1” radius. Use wide blades for straight cuts. automatic spring return.
Blade length: 41-7/8”. All toothed blades will cut steel, brass, copper, plastic and wood. Choose blades based on material hardness, cutting speed and finish. Superior quality,
made in Taiwan.
K. All-in-One Water-Cooled Band Saw System – Includes One Each of…
#83409 Wire
#82203 Variable #82211 #82209 #83340 Twisting Plier
Speed Band Saw Cooling System Diamond Blade MicroFlow Coolant List $44.95
#87343 MicroLux® Water-Cooled Band Saw System. List $525.00 . . . Super Buy $489.95* Our Price
$34.95

44 • ORDER TOLL FREE 1-800-225-1066 *Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance. See our website for a video of this item in use
 HAND TOOLS Follow us on
Jeweler’s Quality Micro Pliers
at an Affordable Price…
Includes FREE custom wooden stand!
You’ll be impressed with the incredible value
offered by these high quality micro pliers.
Made for Micro-Mark in stainless steel, with
finely-finished, precision-formed micro-size
tips and no-slip rubber grips for superb jewelry,
electronic, wire-forming, and model-building
parts fabrication and assembly. Set includes
the following 7 pliers (each approx. 5” long): L M N P Q R S
extra fine needle nose, fine needle nose,
round looping tips, flat tips, split ring tip,
diagonal cutter*, and end nipper*, plus a Lightweight Miniature Jeweler’s Chasing Hammer
nicely finished wooden stand to keep Hammers for Delicate Work Flattens and Shapes Metal
them handy and damage-free. L. Mini modelers’ hammer with 2.5 oz steel R. This well balanced, nicely made
*For use on soft wire only. head and steel handle with aluminum grip. jeweler’s hammer is ideal for use with
#86487 Jeweler’s Micro Plier Set Six screw-on tips include brass flat, steel one of our anvils when you need to
(A $90 value!) $69.95 tapered, steel ball, steel dome, steel flat and shape or flatten metal. Polished tool
plastic flat. 7-1/2” long overall. steel head and hardwood handle. Flat
#83380 Hobby Hammer with 6 Tips $14.95 end of head is 1” dia. Handle is 9-1/2”
long. 5 oz head.
M. An inexpensive tool that will get the job #80811 Chasing Hammer
#86152 done. Use for driving home small pins, nails List $16.95 . . . Our Price $14.95
Loop Closing and model railroad spikes. 1-1/2 oz steel
Plier Semi-circular head is 2-1/2” long. 9-1/2” long overall.
indentations in the Hardwood handle. Toolmaker’s Mallet
jaws make neatly #22102 Hobby Hammer $10.95 Prevents Damage
closed loops without to Metal Parts
distorting. 5-1/4” long Ball Peen Hammers Use these miniature ball
overall. $19.95 peen hammers for shaping metal or riveting. S. The nylon and soft brass faces of
Excellent for use with one of our anvils. our premium quality 2 oz toolmaker’s
mallet prevent the surface scars and
N. #81367 1 oz. head $9.95
dents that can result from striking metal
P. #22119 2 oz. head $11.95 parts. Overall length: 9-1/2”.
#85140 Pencil-shaped Deburring Tool Q. #84254 4 oz. head $19.95 #81523 Toolmaker’s Mallet, 2 oz
Sharp-edged pivoting tip removes burrs #85149 Acrylic Plier Rack, 8” long $14.95 #87952 8 oz. head $17.95 (not shown) $23.60
from rough edges. $12.95 2 or more $11.95 ea.

High Precision Punch Produces Accurate

Disks and Holes in Metal, Plastic and Cardstock Anvils Make Miniature
Heavy-duty, precision ground die plates
#16104 Metal Work Easier
are separated by springs that hold them Anvils are extremely helpful when riveting, forming, shaping,
apart while you load the stock to be bending, embossing, drilling or flattening metal…and
punched (soft materials up to 1/8” thick). whenever you need a hard working surface. The hexagon
Tightening the handle squeezes the anvil can also be used for removing small friction-fit pinions,
material between the die plates so that gears and wheels from shafts and axles.
the precision ground punch can operate #16103
#16104 Jeweler’s Anvil Steel with chrome plated surface.
without tear-out or distortion of the base
3/4” wide x 4-1/2” long x 3” high. $24.95
material. To use, just tap with hammer or
apply force with a press. Includes steel #16103 Hexagon Anvil Case hardened tool-steel ground
punches in the following diameters: 1/8, flat and smooth. 15 holes graduated from 1/32” to 1/4” and
3/16, 1/4, 5/16, 3/8, 7/16 and 1/2 inch. 5 milled slots. 1-5/8” across flats. 3/4” thick. $24.95
#85146 Precision Disk Punch Set
List $120.00 . . . Our Price $99.95 #83437 Precision-Ground Anvil Top and side surfaces
ground flat and square. Use standing upright or laying on
#83437 side. Main body approx. 2-1/2” long x 1-1/4” wide x 1-3/4”
NOW WITH EXPANDED Bend Metal Wire and Strip into high. 2 conical ends are each 1-1/4” long. $25.95
TOOLING SET! Complex Shapes with Ease
#85129 Small Machinist’s Anvil Cast iron with
1-3/4” x 3-1/8” working surface. 5-1/2” long overall x
2-5/8” high. Horn tapers to rounded tip.
(Color may vary.) $16.95

#85129 These anvils are a perfect match with the

miniature metalworking hammers above

Surgeon’s Scissors Make Smooth, Clean Cuts in Delicate Materials

Surgeon’s “Castroviejo” Scissors feature
ultra-sharp, precision-ground jaws with
anti-slip microscopic serrations and
Our Universal Bender forms wire and strip into smooth curves, in multiple planes, and spring-loaded knurled handles which
into complex shapes, including S-curves, squares and coils. Use it on wire up to 5/16” dia. provide the control you need to make
and strip up to 1” wide. Clamps into bench-mounted vise, or can be mounted with 5/16” perfectly smooth cuts every time.
bolts (not included). EXPANDED TOOLING SET* includes 3/16”, 1/4”, 1/2”, 1”, 1-1/4”, Beautifully made of stainless steel.
1-1/2” and 1-3/4” dia. circle pins, 13/32” and 5/8”-tall tight bend blocks, 12” long lever Jaws are 1/2” long; 4-1/2” long overall.
with rubberized grip, follower tool, and stop pin for making duplicate parts. Overall size: Available in straight and curved jaws.
9” long x 3-1/2” high x 2-1/2” wide (not including lever). Made of rust-protected steel. #84440 Castroviejo Straight Scissor $16.95 #84441 Castroviejo Curved Scissor $16.95
#82819 Universal Bender $114.95 *#82819A 4-piece Tooling Set ONLY available separately $17.95 #86417 Set of both Castroviejo Scissors. Value $33.90 . . . Our Price $24.95

See our website for a video of this item in use 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 45
 POWER TOOLS HAND TOOLS SUPPLIES
Use a Jeweler’s Saw for the #87915 Saw not #87915 Professional Bench Pin
included for Model and Jewelry Makers
Finest Cuts in Any Material provides solid support for hand-
Model makers, miniaturists and jewelers sawing and filing soft metals,
know how indispensable this well-balanced wood and more. Mounts quickly
saw frame can be when it comes to intricate and easily with custom C-clamp
cutting. Blades will cut soft metals, wood, (included) to work tables from
fiberglass, styrofoam and plastic. Adjustable 1/2” to 2-1/4” thick; dismounts just
frame permits blades to be drawn taut, and as simply. Specially designed for
adjusts for blades 2-1/2” to 5-1/2” long… facilitating interior saw cuts, Bench
even accommodates broken blades. Nicely Pin includes 3 round cut-outs and
made with a steel bow and hardwood 2 oval cut-outs (one left and one
handle. Cuts up to 2-1/2” deep. Use with our right), plus an elongated V for
jeweler’s saw blades for the finest cuts you’ve Need a saw? maximum versatility. Bench Pin
ever seen. Blades are not included. Order below. #22105 Jeweler’s Saw (see details on left), is approx. 3-7/8” wide x 6” long x
Shown with optional V Block Extension. Saw is ideal for use with #87915 Bench Pin. $18.95 3/8” thick. $20.95
frame may vary.
#22105 #89669 Fold-Up 10x Magnifying Lens
#22105 Jeweler’s Saw $18.95
with LED Light and Pointer Made of zinc
#20127 V Block Bench Extension gives you extra control, support and alloy, this tiny yet powerful tool features a
space while using your jeweler’s saw. Also helpful when filing and high-quality 10x lens which makes detailing
drilling. Included clamp fits any table up to 2” thick. 2 -1/2” x 7”. $9.95 mini model figures, doing jewelry work and
24-piece Jeweler’s Saw Blade Sets many other micro projects much easier. It
folds neatly and securely into a provided
#22107 Includes 12 each #4 (38 tpi) and #2 (43 tpi) $8.95 black case that is slim enough to fit in your
#22108 Includes 12 each #1 (51 tpi) and #2/0 (56 tpi) $8.95 pocket for on-the-go use. Includes built-in
#20127 LED light with on/off switch. $10.95
#22109 Includes 12 each #4/0 (66 tpi) and #6/0 (76 tpi) $8.95

#22105 Saw
available #60661
separately Mini Hack Saw
Hack saws are not
Special Plier just for metal…use for #85779
Holds Tubing, plastic, wood dowels and Combo Bench Block
other hardwoods, too. Interchangeable steel and nylon blocks fit
Strips and Rods Includes 6”, 24 tpi blade. into a non-slip rubber base that absorbs
while Sawing List $12.95 . . . Our Price $9.95 shock…lets you hammer at your work
#60684 Mini Hack Saw Blades bench without creating excessive noise
6”, 24 tpi, 1/32” kerf. and vibration. Steel and nylon blocks are
If you use a jeweler’s saw to cut tubing,
Package of 6. 5/8” x 3” dia. Rubber base is 1” thick x 4” dia.
this is a must-have tool! V-grooved jaws
$5.95 List $34.95 . . . Our Price $29.95
hold tubing, rod and strip securely and
#86716 Swiss-Tech
safely. Narrow slot through the center of
Micro-Plus EX 9-In-1 Pocket Tool Kit
the jaws guides the saw blade, so you get #80924 Toolmaker’s Bench Block A nicely made tool Includes pliers, #1 Phillips screwdriver,
a clean, straight cut every time! Works machined from a solid block of tool steel. The smooth surface #2 Phillips screwdriver, #1 flat screwdriver,
with tubes, strips and rods from 3/32” to supports your work and the nine holes (from 1/8” to 5/8”) #2 flat screwdriver, bottle opener, wire
3/8”. Includes comfortable, cushioned allow clearance for cutting tools and punches. Use for drilling, cutter, wire stripper and wire crimper. Each
handles and spring-loaded box joint tapping, reaming, pin punching and more. Has a V groove tool is smart, functional and well-designed.
construction for years of use. 7” long. across the top surface for holding round and odd shaped Rugged and handsome stainless steel
#85166 Tube Cutting Plier $29.95 stock. 3” dia. x 1-3/8” high. List $37.60 . . . Our Price $29.95 construction. Attaches to your key ring.
#22105 Jeweler’s Saw $18.95 Perfect for gift-giving! $24.95

#89668 Tight Mesh Heavy Duty Brass

Parts Cleaning Basket At 2” (50 mm) in
diameter, our Tight Mesh Heavy Duty Brass #87913
Parts Cleaning Basket is twice the size of Multi-purpose Jewelry Duo Chain Kits Silicone Work Pad
others on the market. Super-tight 15 thou- are Ideal for All Kinds of Projects! #87912 Ingenious, flexible, semi-soft silicone
sandths-of-an-inch mesh screen keeps loose Each Duo Chain Kit contains 3 chain types, Electronic Demagnetizer pad provides both impact-deadening
parts safe and secure within its roomy 1.5” 18” each, in 2 different finishes (6 total), Just touch a screwdriver, nut driver, and roll-resistance, keeping miniature
interior. Designed for use in ultrasonic plus all the jump rings and lobster claws wrench, tweezer or other tool to the hardware, model parts and other tiny
cleaners, parts washers and solvent baths, you need to make finished pieces if you top of the box, press the button, and components from bouncing into the
this basket holds all components, jewelry actually use them for jewelry making! like magic, this little gem of a device black hole of oblivion while handling.
pieces and more without letting them slip Great for building dioramas, model ships, neutralizes magnetism, allowing The pad is also naturally resistant to
through the screen. The two halves of the trains, trucks and more. $39.95 each you to work on electrically-sensitive paint and glue, making it a great
basket simply screw together, making it #88696 Matte Black & Brass Oxide components and equipment without surface for scale model assembly
easy to open and close and reliable to use. damage. Plugs into standard and detailing as well. 13-1/2” x 9-1/4”
#88698 Antique Silver & Antique Gold
Two deeply knurled rings around the basket household outlet. x 3/32” thick.
provide a no-slip grip, even when wet with #88695 Silver & Gold $29.95 $24.95
cleaning solution. $17.95 #88694 Rhodium & Gunmetal

46 • ORDER TOLL FREE 1-800-225-1066 • OUTSIDE USA CALL 1-908-464-2984 See our website for a video of this item in use
Follow us on SUPPLIES HAND TOOLS

#89667 Deluxe Steel Machinist’s Squares

Deep Cut Jeweler’s Saw for Ultimate
Accuracy

4” throat provides 62%

more depth capacity than NOTE:
our standard-size saw for BLADE IS NOT
added versatility. The sturdy INCLUDED.
frame features a built-in
blade tensioner for
straighter cuts.

Accepts blades
up to 6” long (see below).
#89250 Pocket-Size Micro Plier Set with Case At less than half 12-1/2” long overall. $26.95
the size of ordinary pliers, these Micro Pliers fit into tight spaces
and confined areas where other tools simply can’t! You'll be very You’ve never seen or used anything better
pleasantly surprised at just how much these little tools can do! Set for marking a perfect 90˚ angle. Use for
includes chain nose, flat nose, round nose and diagonal soft-wire marking metal, wood, plastic, etc. Hard-to-
cutter in a velvet-lined, zippered leather case. Each plier is just over find small sizes are a must for miniaturists
3” in length with leaf-spring return. $22.95 and modelers. Also excellent for setting up
small table saws, disk/belt sanders and
#87914 1,000-Piece Metric Phillips Micro Screw other tools. Made of fine quality, fully
NOTE: ground carbon steel. Note: Sizes are approximate.
Set You asked for them, and now you’ve got them!
Approximately 60 each of 18 micro sizes. Used
BLADE IS NOT #10117 3” Blade, 1-7/8” Beam $14.95
by jewelers, modelers, machinists, scratch- INCLUDED.
#10118 4” Blade, 2-1/2” Beam $19.95
builders, repair technicians, and
#10119 5” Blade, 3” Beam $20.95
countless other makers. These
nickel-plated-steel screws #89243 Pocket-Size Bow Saw Measuring just 4-1/4” long, this mini #83226 Set of 3. List $56.85 Price $39.95
have 1.2 mm thread diameter saw not only provides delicate control, go-anywhere versatility and
#86729 Cup Burr Tool Simple and economical,
with 0.25 mm thread pitch. precision when sawing a wide range of materials, its clever design
it works faster than a file and makes a neat,
Set includes a selection screws allows you to work with virtually any jeweler’s saw blade…even the
smooth, rounded end on wire up to
with 1.6 mm diameter heads in 1.6, still-good fragments of previously useless broken blades! Well-made
18 gauge. 5” long overall with a
2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0 and 5.5 mm of steel, brass and lacquered wood, this handy saw includes 2 knurled
1.8 mm (1/16”) diameter
lengths and screws with 2 mm diameter heads nuts spaced only 1-3/8” apart to tightly secure the blade. $13.95
cup. $12.95
in 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 5.5 and 24-piece Jeweler’s Saw Blade Sets – $8.95/set
6.0 mm lengths, all neatly packed in
#22107 12 each #4 (38 tpi) #22108 12 each #1 (51 tpi) #22109 12 each #4/0
a plastic storage box. $24.95
and #2 (43 tpi) and #2/0 (56 tpi) (66 tpi) and #6/0 (76 tpi)

#89122 Heavy Duty Pry Knife #86732 Wire Straightener Tool Nylon rollers make it easy to straighten and
Designed for opening fine watch cases without damaging or scratching, smooth wire that has already been worked. Saves money by allowing you to
this handy tool is also great for quickly and safely opening battery reuse wire that would otherwise be wasted. How it works: Put the rollers in
boxes, model locomotives, key fobs and more. It might look your hand in the open position with each of the rollers side by side. Lay the
like a knife, but the beveled steel blade is not at all sharp. end of a piece of wire that requires straightening on the three rollers, then
Instead,its finely tapered edge is designed to easily move the rollers until they form a triangle with the wire in the center. Grasp
slide between mating parts to do its job. 5-1/2” long; the rollers in one hand holding tightly, then pull the wire through the rollers to
7/8” diameter. Includes 2 blades and hex wrench. $16.95 straighten. Nylon rollers help keep wire coating intact. List $15.99 . . . Our Price $13.95

#86700 Jewelry with Wire, by Suzanne McNeill, softcover #86733 One-Step Looper
Learn to bend 20-gauge wire into swirls and curls to create With this fantastic tool, you can create and trim
fabulous jewelry. Add a few beads for color and you will be eye pins all in one motion. Works with dead-soft or
stunned at the results. The jewelry is so beautiful and striking half-hard precious metal wire, craft wire, copper or
that you will have friends asking you to make one for them. brass core wire between 26 and 18 gauge. This tool
Step-by-step photos and instructions for more than 50 beautiful is fast and easy to use, and makes perfect loops
projects! All the foundation skills you’ll need to design your every time with just a squeeze of the handle.
own wire jewelry: shaping wire, closures, chain styles, bead For clean and consistent eye pin loops, this tool is
units, jump rings, coils, cloverleafs, spirals, incorporating the best! Not for use with hard wire. $30.95
beads and stones, and more! $9.95

Micro-MakeTM Watch Component Assortment #89247 Wire Bending and Wrapping Jig packs a grid of 193
Perfect for model builders, crafters, holes into just 5-3/4” x 1-1/4” x 1/2” of space, allowing
D-I-Yers, jewelry artists and, of course, you to form thin-gauge brass, copper, aluminum
watch and clock makers, this random and precious metal wire into shapes from smooth
assortment of vintage components… and simple to intricate and complex. And,
including gears in all sizes, pins, creating duplicates of even the most
screws, wheel pinions, armatures, involved design is a breeze! Includes
studs, escape wheels, plates, ratchets jig, 20 each 3/32” and 1/8” dia.
and more…is a treasure trove steel pins and a selection of
exploding with possibilities for plastic wrapping tubes.
countless projects! With literally $30.95
thousands of exceptional mini metal
#89862 The Clock & Watch bits and pieces in various finishes and
Maker’s Guide To Gear Making patinas at your fingertips, you’ll find
and Other Machines, by Robert great uses for them in model railroad
Porter An excellent guide on cutting scenes, dioramas, jewelry pieces,
gears in different profiles using a animation projects, steampunk/cosplay gear, and so much more! Each 250 gram (8.8 oz)
assortment is neatly packed in a sturdy, clear plastic storage box with latching lid. Jig must be secured in a
traditional watchmaker’s lathe and vise or bench-mounted for use.
milling attachment. $49.95 #87917 Micro-MakeTM Watch Component Assortment. List $54.95 . . . Our Price $44.95

See our website for a video of this item in use 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 47
 HAND TOOLS SUPPLIES MICRO-MAKETM
TM #87486 13-Piece Technician’s Precision Extendable
The Mercedes-Benz of Precision Tools from Wiha of Germany Ratchet Screw and Nut Driver Set Ergonomically
These professional quality miniature tools are the only ones you’ll designed handle incorporates a patented
ever need! Tool blades are made of high alloy chrome-vanadium- #80775 silent-operating gear-less ratchet system
molybdenum steel with close-tolerance tips. which provides greater
Comfortable, tapered handles are molded to the control and comfort
blades, so they’ll never come loose. Fingertip while working on an
rotation cups at the back end add control. amazing array of projects.
All Wiha tools are guaranteed for life. Includes ratchet handle,
four double-ended screwdriver
#80775 Wiha 7-Piece Precision
bits (slotted blade 1.5 mm / Phillips
Screwdriver Set includes: Slotted
#000; 2.0 mm / #00; 3.0 mm / #0; 4.0 mm
1/16”, 5/64”, 3/32”, 1/8”; Phillips #00,
/ #1), plus eight hex nut drivers (3.0, 3.5, 4.0,
#0, #1. Overall length: 4-3/4” to 6-3/4”.
4.5, 5.0, 5.5, 6.0 and 7.0 mm), all packed in a
$39.95
custom-fitted, zippered storage case. $34.95
#80776 Magnetizer/Demagnetizer
Just slip your screwdriver blade Micro-MakeTM MasterShop Ultimate
(or any steel item) Miniature Brass Hardware Set
through the slots
to magnetize or It is a maker’s dream come true! Outfit
demagnetize. A your shop with the be-all-end-all
great way to hold selection of every miniature screw,
hard-to-start mini nut and washer we sell in one ultimate
screws. $8.95 package…and SAVE OVER $600.00!
Never before have we offered such a
set – 2,000 pieces all together – plus
#81546 8-piece Nutdriver Inch Set a perfect pair of storage containers
Includes sizes 3/32, 7/64, 1/8, 9/64, to keep every last piece neat and
5/32, 3/16, 7/32, and 1/4 inch; all with organized until you need it. You
2-3/8” long blades. will never search for just the right
$54.95 round, flat or hex head screw again!
#81547 8-piece Nutdriver Metric Set #88542K
Includes sizes 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, Micro-MakeTM MasterShop
6.0 mm; all with 2-3/8” long blades. Ultimate Mini Hardware Set
$54.95 Value $1,196.00 . . . Our Price $499.95
#88542 30-Piece Screw Cap Container Set and Plastic Storage Box ONLY $15.95
Ballpoint Hex Drivers let you drive hex head cap screws, button head
screws and set screws at an angle up to 25° off-center (see illustration). Miniature Brass Machine Screws, Nuts & Washers
#81708 8-piece Inch Set
Includes sizes .050, 1/16, 5/64, 25 Pieces
3/32, 7/64, 1/8, 9/64, and 5/32 inch; with 1-9/16” to 2-3/8” long blades. Per Package
List $50.00 . . . Our Price $39.95 $14.95/pkg. Round Head Screws Flat Head Screws Hex Head Screws
Size Length Item Number Item Number Item Number
Wiha Master Technician’s Set 00-90 1/8” 85470 85434 85450
This 51-piece set offers 00-90 1/4” 85471 85435 85451
#86781
00-90 3/8” 85472 85436 85452
incredible versatility,
00-90 1/2” 85473 85437 85453
utility and quality. 0-80 1/8” 85474 85438 85454
These tools have large, sturdy 85475 85439 85455
0-80 1/4”
handles constructed of 85476 85440 85456
0-80 3/8”
cadmium-free plastic 85477 85441 85457
0-80 1/2”
with a rotating cap for 85478 85442 85458
1-72 1/8”
precise turning and 85479 85443 85459
1-72 1/4”
control. Hard-chromed 85480 85444 85460
1-72 3/8”
non-slip CVM steel tips 85481 85445 85461
1-72 1/2”
are precision-ground for 85482 85446 85462
2-56 1/8”
a perfect fit every time. 85483 85447 85463
2-56 1/4”
Set includes: 1.5, 2.0, 85484 85448 85464
2-56 3/8”
2.5, 3.0, 3.5, 4.0 mm; 85485 85449 85465
2-56 1/2”
Phillips: #000, #00, #0, #1;
Hex metric: 1.3, 1.5, 2.0, Nuts Washers Reference Chart
2.5, 3.0, 4.0 mm; Hex inch: 0.028 inch (0.71 mm), 0.035 inch
(0.89 mm), 0.050 inch (1.27 mm), 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32; Item No. Size Item No. Size Size Dia. Clear. Drill Tap Drill
Torx: T1, T2, T3, T4, T5, T6, T7, T8, T9,T10; Pentalobe: PL1, PL2, PL3, PL4; 85466 00-90 85486 00 00-90 .047” 55 61
Nut drivers: 1.5, 1.8, 2.0, 2.5, 3.0, 4.0, 4.5, 5.0, 5.5 mm; Chip lifter: 1.0 x 2.0 mm; 85467 0-80 85487 0 0-80 .060” 52 55
plus a space-saving, custom-fitted steel bench stand/organizer. 85468 1-72 85488 1 1-72 .073” 48 53
#86781 Wiha 51-pc. Master Technician’s Set. List $319.76 . . . Our Price $287.95 85469 2-56 85489 2 2-56 .086” 43 50

#86782 Wiha 65-piece Micro-Bit Ratchet Set This impressive set by

Wiha is everything you have come to expect from the acclaimed German Hex Head
manufacturer. Each component is precision-crafted and built to last. The
ergonomic 72-tooth reversible mini ratchet is drop-forged. The bits are Nutdriver
constructed of Wiha’s special chrome-vanadium-molybdenum tool steel. Set is
The 5” speed-handle with rotating end cap is made of high-quality Sized
cadmium-free plastic. This is quite honestly one of the nicest sets we’ve
ever seen. Bit profiles include: Slotted: .8, 1.2, 1.5, 1.8, 2.0, 2.5, 3.0, 3.5, 4.0 Just Right for
mm; Phillips: #000, #00, #0, #1; Hex metric: .7, .9, 1.3, 1.5, 2.0, 2.5, 3.0, 4.0 Our Mini Hardware
mm; Hex inch: .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32; Torx: T3, T4, #80240 4 -piece Nutdriver Set includes
T5, T6, T7, T8, T9, T10, T15, T20; Nut driver, inch: 5/64, 3/32, 7/64, 1/8, 9/64, 4 special nutdrivers for 00-90 (5/64”),
5/32, 3/16, 7/32; Nut driver, metric: 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 0-80 (3/32”), 1-72 (7/64”) and 2-56 (1/8”)
5.0, 5.5 mm; Pentalobe (for Apple products): PL1, PL2, PL3, PL4, PL5, PL6. hex head screws and nuts. $29.95
Includes deluxe fitted organizer/case. $124.95

48 • ORDER TOLL FREE 1-800-225-1066 • OUTSIDE USA CALL 1-908-464-2984 • OUTSIDE USA CALL 1-908-464-2984
 Follow us on SUPPLIES HAND TOOLS POWER TOOLS
Economical Nut Starter Miniature Pry Bar #86628 Universal Mini Nut Starter Miniature nuts are a pain.
They’re hard to pick up and even harder to thread. This tool
Great for pulling miniature
does both so easily that you’ll think you’re cheating. Holds
pins and nails, railroad
#21116X3 all of our miniature nuts from .056” to .125”. Cap nuts,
spikes, staples, etc.
Gripster Nut star nuts, lock nuts or round nuts…any pattern
Has .040” wide x
Starter has works. Grab the nut right from your workbench
.137” long slot
micro spring and screw it on! Also great for holding round
in a chamfered
fingers that shanks and hex screws in the same size
tip; 2“ long
grab the range, and for eyeglass hinge
blade.
outside of the #81576 screws as well. If it’s tiny and
nut. Works on Miniature needs twisting, this tool
miniature sizes Pry Bar $9.95 can do it! 3-3/4” long.
#00 – #10. Releases by pressing trigger $24.95
on back end. 4-1/2” long. Set of 3. $9.95
8-piece Open Ended Wrench Sets
Screw Chek’r Instantly Identifies Drill Bits, Screw Sizes and More Made in the USA! These high-quality
Our popular inch and metric Screw Chek’rs are ingenious, miniature wrenches are offered in
threaded gauges which quickly tell you size, threads per inch, sought-after small sizes. Moody
tap drill size, clearance drill size, length and basic diameter. Brand Acu-Min Multi-Steel
They also straighten bent screws and clean up rusty and handle with 30˚ offset. 4”
battered threads. Made in the USA of heavy gauge, long. Comes in vinyl pouch
satin chrome plated steel. Instructions included. with clear front and secure flap-snap.
List $30.00 each . . . Our Price $25.95 each #86799 8-piece Open Ended Wrench
#60361 Inch Screw Chek’r for American and Unified Inch Set includes 5/64 “, 3/32”, 7/64”, 1/8”,
screws from number 1 through 5/16”. Also identifies 5/32”, 3/16”, 1/4 “, 5/16”. $39.95
wood screws, sheet metal screws, rivets, cotter pins. #86798 8-piece Open Ended Wrench
#60345 Metric Screw Chek’r for metric Metric Set includes 2.5 mm, 3.0 mm, 3.2 mm,
#60361 4.0 mm, 5.0 mm, 5.5 mm, 6.0 mm, 7.0 mm. $49.95
screws from 2 mm through 7 mm.

#89249 Magnetic Work Pad Steel components, #88042 Screw-Holding Tweezer Special angled
screws, miniature bearings and other ferrous parts “V”-end notched tweezer is ideal for micro
can't roll away and disappear when you use this screw placement, able to access areas nearly
magnetic pad for repair and assembly/disassembly impossible to reach without it. Easily grips
work. Perfect for use with machinery, miniature the tiniest screws, from those used for
motors, model train engines and more. Pad can be eyeglasses, up to 4-40 size. Securely grabs a
cut to smaller sizes with scissors if required. Pad is multitude of screw head styles, including fillister,
approximately 12” x 12” x 1/32”. $13.95 pan, flat, hex, oval, button, truss and round. $9.95
Note: The pad’s low magnetic field is only on one side and will not harm
or affect nearby electronics. But the pad should not be used for repairing
cellphones, computers, digital cameras and devices with memory cards. Power Screwdriver for Model Building,
Electronics and Other Miniature Assembly and Repair
Solid Brass Mini Hardware The UltraTECH precision power screwdriver
Mini Hardware Use our miniature hardware for dollhouse transforms the energy of two AAA cells into
shown approx. doors and furniture, model railroad structures, hours of screw-driving torque. The ultra-slim
actual size ship models, architectural models and more. lightweight housing (weighs just 2.5 ounces)
A
Fasten with miniature nails included or with includes ergonomic soft-grip finger pads,
glue. Items shown approx. actual size. a forward/reverse push switch, plus a quick-
A. #15256 Flush Hinge, 6/pkg. $6.95 change chuck. Includes six precision 5/32”
B. #15257 Handle, 8/pkg. $6.95 hex shank bits: #0 and #1 Phillips, 1/8” and
1/16” flat blades, and T5 and T6 torx; plus two
C. #15258 H Hinge, 4/pkg. $6.95
AAA cells.
B D. #15259 Butt Hinge, 4/pkg. $6.95
#86258 UltraTech Precision Power
C E. #15260 Strap Hinge, 4/pkg. $6.95 Screwdriver $34.95
Micro-Mark Tip: Convert Your Screwdriver
Our #85282 Pin Insertion Plier is the into a Powered Pin Vise
D ideal tool to use for driving the mini nails Slip the collar of our #86259 drill chuck onto
included with these hinges and handles! the shaft of the screwdriver above and
E #85282 . . . $24.95 tighten the set screw to instantly convert
your screwdriver into a powered pin vise.
#86259 Drill Chuck $19.95
Miniature Nails for Miniature Projects (Drill bit not included. Chuck capacity 1/64” to 1/8”)
Solid brass mini nails for models, dollhouse
miniatures, model railroads and craft projects.
Micro
#14315 Mini Nails, 3/32” long x .020”
diameter (pkg. of 100) $6.95 Screw Starters
#81844 Mini Nails, 3/8” long x .020” Spring-loaded knobs
diameter (pkg. of 100) $5.95 expand the blades so
you can insert and hold
the screw. Once the screw
Miniature Piano Hinge #85109 #85110
is started, press the knob to
release it, then drive it home.
#85109 for slotted screws (2.2 mm wide blade) $13.95
#85816 Brass-plated, .360”
wide x 15” long. Can be cut to desired length. $17.95 #85110 for Philips screws (#00 size tip) $13.95
#88546 18 Compartment Plastic Storage Box
#60405 Miniature Brass Eye Pins Use for hanging mini items in Heavy duty plastic storage box with latching lid
the dollhouse, railing stanchions for railroad models, tying off features eighteen 2” x 1-3/4” x 1-1/2” high
lines on ship models, and more. .033” dia. brass, 1/2” long, 3/64” compartments. Perfect for storing nuts, bolts, screws,
inside eye dia. Approx. 144 pcs./pkg. $9.95/pkg. beads, scratch-building parts, hooks, clasps, fishing gear
and much more. Overall size is 11” x 7” x 1-3/4”. $11.95

See our website for a video of this item in use 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 49
 HAND TOOLS
Parallel Jaw Pliers Hold Like No Others Xuron Pliers…Aerospace #80333
Precision at Economical Prices
The Xuron Corporation has been manufacturing precision
pliers for the electronics and aerospace industries in Saco,
Maine, since 1970. All Xuron cutters feature their patented
blade bypass shearing action instead of the compression cut
of standard cutters. This shearing action is made possible by
the use of ultra-precision computer controlled grinders. That’s #80334
why they cut so clean, square and close with half the effort of
#85932 #85931 #86632 compression type cutters. Made of hardened steel with soft
rubber grips and spring return.
Parallel jaw pliers have a special hinge that holds the jaws parallel to each other. So, objects
#80333 High Precision Micro Shear
being held won’t slip out of your grasp like they do with standard plier’s angled jaws.
This all-purpose cutter not only cuts soft wire up to 20 gauge
Smooth-faced jaws won’t mar, and the double-jointed hinge exerts a vise-like grip with
copper, but also plastic, paper, mylar, fabric and thread. It will
easy hand pressure. In a pinch, you can also use these pliers to grasp hex-head bolts
even cut a single human hair! Ideal for cutting plastic model #80337
without damage. Made of nickel-plated steel with blackened steel jaws or brass lined jaws.
parts from molding sprues. 5” long. $14.95
Grip range: 0 to approx. 3/8”; overall length 5”.
#85932 Flat Nose Parallel Jaw Plier with straight jaws and 1/4” wide tips $24.95 #80334 Angled High Precision Micro Shear
Like #80333, but with a 55° angled cutter head for hard-to-
#85931 Chain Nose Parallel Jaw Plier with tapered jaws and 3/32” wide tips $19.95
reach locations. $22.95
#86632 Brass Lined Plier allows for non-marring bending and gripping of delicate parts.
Lining is 1/4” wide and 7/8” long. Exceptional quality with spring-action handles. $24.95 #80337 Track Cutter
Cuts model railroad track up to HO gauge clean and square
#88140 BEST BUY! Set of all 3 Parallel Jaw Pliers. List $70.00 . . . Our Price $54.95 #80338
with much less effort than other cutters. 5-1/2” long. $20.95

Stainless Steel Box Joint Wire Loop Pliers #80338 Tweezer Nose Plier
Six separate milling operations on each nose insure the
blades match precisely in size, shape and alignment. This
plier combines the precision to pick up a human hair with
the strength required for wire forming operations. Smooth,
non-serrated jaws. 5-3/8” long. $23.95
#80999
#80999 Hard Wire Cutter
Cuts hardened music wire up to 1/16” dia. Also
cuts twisted aircraft cable. 5-1/2” long. $20.95
BEST BUY!
#81048 Set of All 5 Xuron Pliers described above $91.95
Beautifully made, highly polished pliers make perfect loops, rings and tight radius bends
in wire and strip material. An excellent tool for jewelry and ship model work. One jaw has
a stepped tip for making 3 different radius bends. The other jaw has a matching curved
recess, making pliers work like a male/female bending die. 5-1/2” to 6” long overall.
#14483 Large Wire Loop Plier with 1/8”, 3/16” and 1/4” stepped jaw $14.95
#14484 Small Wire Loop Plier with 3/32”, 1/8” and 3/16” stepped jaw $14.95
#50295 BEST BUY! Set of both Wire Loop Plier. List $29.90 . . . Our Price $24.95 #86705 #86707 #86704
#86705 Xuron Double Flush Cutter Heavy-duty shearing action leaves a smooth, flush
#85161
edge on both sides of the cut. The 90˚ cutting edges stay sharper, longer. Non-glare finish
Non-Scratch Plier
reduces eye strain. $14.95
Use this special plier when you want to get
a grip on things without ruining the finish. #86707 Xuron Hard-Wire and Memory-Wire Cutter Cutting effort is minimal thanks to
Nylon inserts embedded in the jaws of full bypass shearing action. Rated for cutting hard wire up to 12 AWG (2 mm).
this steel plier protect gripped objects from List $39.00 . . . Our Price $30.95
damage. Eight-step adjustment with spring #86704 Xuron Flat/Round Nose Plier 3 mm tapering jaws for bending, forming, grasping,
loaded pivot grips objects up to 1-3/4”. holding and flattening wire and other materials. List $23.00 . . . Our Price $17.95
Includes comfortable rubber handle covers.
Ideal for flywheels and other R/C model Surgeon’s Stainless Steel Micro Pliers
assembly and maintenance. Made in Japan.
List $50.00 . . . Our Price $39.95 These extremely fine pliers are perfect for bending,
grasping, and positioning small components.
Miniature jaws have no-mar smooth faces and
Ultrafine Needle Point Plier Works Like Tweezers are only 1/8” thick x 1/4” wide, making it easy
This beautifully made tool is used by surgeons to work in confined areas. Weighing in at just
to remove glass, wood and metal splinters one ounce, each plier is made of never-rust
from accident victims and when tweezers surgical-quality stainless steel with box-joint
won’t give them a strong enough grip. You’ll construction for a lifetime of use. Set
use them when you need an extra fine includes flat nose, bent nose, needle
needle nose plier for gripping the smallest nose, and narrow nose. All pliers
miniature items and for making tiny bends approx. 5” long.
in wire and strip metal. Made of polished, #60399 Micro Plier Set $29.95
surgical quality stainless steel with box joints
and spring return. 6” long overall.
#60720 Surgeon’s Splinter Forceps $24.95 A Great Mini Plier Value
All pliers are made of drop forged,
3-piece Aerospace-Style Angled Mini Shear Set high carbon steel with foam cush-
Extra fine jaws reach into confined spaces. ioned handles and spring return.
Tip angles of 21°, 45° and a unique reverse Six-piece set includes: end nipper,
angle of – 45° permit both front and back needle nose, flat nose, round nose,
cuts. 3-plier set has corrosion-resistant black- diagonal cutter and bent nose. Pliers
ened steel jaws, spring-loaded handles and range from 4” to 5-1/4” long. Needle
cushioned no-slip grips. All pliers are 5” long. and bent nose pliers have serrated
Not for use on steel. Grip color may vary. jaws for better grip.
#82526 Cutting Plier Set $34.95 #80974 6-piece Plier Set $39.95

50 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 Follow us on SUPPLIES HAND TOOLS NEW ITEMS
Finally…
A Metal-to-Metal Glue
Premium quality half hard metal for ease in cutting, drilling, filing and bending.
Brass Tube .014” WALL
that Really Works!
All items are 12” long unless otherwise noted. All sizes listed are outside dimensions. Sometimes you just want to
ITEM SIZE PCS/ PRICE/ ITEM SIZE PCS/ PRICE/
NO. O.D. PACK PACK NO. O.D. PACK PACK join metal parts and assemblies
Metal Shop to other metal parts and
82632 1/16” 15 $14.95 60200 3/16” 12 $24.95
Assortments 60197 3/32” 15 $14.95 60201 7/32” 10 $20.95 assemblies without the
(Numbers in parenthesis indicate 60198 1/8” 15 $20.95 60202 1/4” 8 $19.95 hassles of soldering or
number or pieces per item) 60199 5/32” 12 $19.95 60203 9/32” 8 $20.95 welding. This instant-
cure metal-to-metal
#82843 Small Round Brass Tube Solid Brass Solid
Assortment $25.95 #82843 Rod Brass Strip
glue makes that process
quick and easy. Tested in
Contents: 1/16 (3), 3/32 (3), 1/8 (3), 5/32 (2), 3/16 (3), 7/32 (2), 1/4 (2) ITEM SIZE PCS/ PRICE/ ITEM PCS/ PRICE/
the Micro-Mark shop, this
NO. O.D. PACK PACK NO. SIZE PACK PACK
#82844 Large Round Brass Tube Assortment $49.95 82635 .020” 25 $9.95 60258 .016” x 1/4” 20 $19.95 product gets the job done
Contents: 5/16 (6), 3/8 (6), 7/16 (3), 1/2 (3) 82636 1/32” 25 $9.95 60263 .025” x 1/4” 15 $16.95 like no other. 1 oz bottle
82637 3/64” 20 $9.95 60268 .032” x 1/4” 15 $18.95 with applicator tip.
#82845 Round Aluminum Tube Assortment $14.95 82638 1/16” 15 $9.95 60269 .032” x 1/2” 10 $16.95
Contents: 1/16 (4), 3/32 (4), 1/8 (3), 5/32 (2), 3/16 (2), 7/32 (1), 1/4 (2) 60227 3/32” 16 $17.95 Note: As with other
60228 1/8” 10 $15.95 CA adhesives, safe
60229 5/32” 8 $18.95 4” x 10”
#82846 Square Brass Tube Assortment $32.95 60230 3/16” 5 $14.45 handling is important.
Contents: 1/16 (4), 3/32 (2), 1/8 (4), 5/32 (1), 3/16 (3), 7/32 (1), 1/4 (3) Sheet Metal See our website for details.
#82849 Round Copper Tube Assortment $19.95 Square Brass ITEM
NO. SIZE
PCS/
PACK
PRICE/
PACK Ships by ground to
Tube .014” WALL 48 contiguous U.S. only.
Contents: 1/16 (4), 3/32 (4), 1/8 (6), 5/32 (4) 60234 .005” Brass 6 $20.95
ITEM PCS/ PRICE/ 60235 .010” Brass 6 $22.95 #89160 Alteco MR Metal
#82851 Round Brass Rod Assortment $12.95 NO. SIZE PACK PACK
60236 .016” Brass 6 $32.95 Cyanoacrylate Adhesive, 1 oz $22.95
Contents: .020 (2), 1/32 (5), 3/64 (2), 1/16 (4), 3/32 (2), 1/8 (2), 3/16 (1) 60218 1/8” 12 $24.95 60237 .032” Brass 3 $30.95
60222 1/4” 6 $16.95 60243 .025” Copper 3 $29.95
#82852 1/64” Brass Strip Assortment $28.95
Contents: 1/4 (6), 1/2 (3), 3/4 (3), 1 (3), 2 (3) 6” x 12” Sheet Metal ITEM NO. MATERIAL THICKNESS PCS/PACK PRICE/PACK

#82853 1/32” Brass Strip Assortment $44.95 83125 Stainless Steel .005” 2 $14.95
83511 Stainless Steel .010” 2 $19.95
Contents: 1/4 (4), 1/2 (4), 3/4 (3), 1 (4), 2 (3) 83124 Brass .005” 2 $10.95

Metal Forming Plier Sets Bend Any Shape You Need

Versatile
Hand-Held
Cutting Jig for
Metal and
Wood
See details
of each plier at
micromark.com Use this nicely made, hand-held mitering
Like our ever-popular and exceptionally useful #60398 4-piece Metal Forming Plier Set tool to make quick, accurate 15˚, 30˚, 45˚
#83260 Bits and Pieces of Metal Nearly and 90˚ angled cuts in round metal tubing,
1 lb. of assorted sizes and shapes of metal (available below), we have reached out to our source for unique specialty pliers to assemble
this new, beautifully made Slim Line Metal Forming Plier Set. Designed to complement rods and wood dowels, as well as making
tubes and rods in lengths up to 5”. $26.95 clean 90˚ cuts in metal and wood strip
and extend the functions and capabilities of the original set, this finely-crafted new set
will allow you to form U, V, and virtually any other shape, with skill, control and accuracy, stock, model train rail and more. Hardened,
even in confined areas. Let your creativity run free! Pliers are made of highly polished machined steel head is mounted onto an
stainless steel and feature box-joint construction for precision performance and durability. ergonomically-contoured 4” wood handle.
Includes an integrated hold-down bar to
#89943 Slim Line 5-piece Metal Forming Plier Set. List $197.95 . . . Our Price $89.95
keep fingers clear of the cutting area and 0
This set makes loops, rings, S, C, Z, L and to 1” adjustable/removable stop for making
just about any other shape. Bends strip repeated cuts. Slotted head accommodates
stock up to 1/32” thick and wire up to saw blades up to .015” thick. For added
3/32”. The strange looking plier at the capability, the head can be removed from
#81774 101-piece Spring Assortment the handle and secured in a vise. V-grooved
top of the photo will even bend hard-
Includes a selection of industrial quality channel holds stock from .010” to .25” high.
ened music wire. Made of polished
extension, and compression springs for a
stainless steel with box joints that keep #87908 Multi-Angle Metal & Wood-Cutting
variety of applications and uses. $10.95
jaws in alignment. Orthodontists use Jig. List $69.95 . . . Our Price $54.95
these and pay about $41.00 each from
dental supply houses. We buy directly
from the manufacturer, which allows
us to provide you with these well-
made, useful tools at a great price.
#60398 Metal Forming Plier Set
$49.95
#60662 Super Leverage Metal Shear The unique design cuts like
a male/female punch and die, not like a scissor. That’s why
it’s the only tool we know of for under $100.00 that will
cut sheet steel up to 18 gauge (.0478”). It will also cut #84255 Pipe and Tube Tweezer Set
thicker, softer metals (aluminum and brass up to Specially contoured tweezers securely hold
#86588 Xuron Micro Bending Plier .065”) with a lot less effort. Spacing between round or hex-shaped objects while fabri-
Uniquely shaped jaws form intricate shapes the hardened steel jaws can be adjusted to cating, assembling and soldering. Angular
in wire and light gauge strips of brass and accommodate wear and different tip lets you access tight places. Set of 4
aluminum. Features Xuron’s Light-TouchTM thicknesses of metal. Made entirely works on sizes down to approx. 1/8” dia.
return spring plus non-slip Xuro-RubberTM of steel with vinyl grip handles. Jaw Made of durable, non-magnetic stainless
grips for comfort and control. $19.95 10” long overall. $9.95 Detail steel. $19.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 51
 HAND TOOLS

#82878
(Press-It & tap
sold separately)
Use Press-It for press-fitting small parts together and for Our 3-in-1 Metal Worker combines three metal and plastic Engineered to incorporate unique features and increased
removing gears and wheels from axles. Use as a hole punch sheet fabrication tools into a single, compact, bench-top versatility right out-of-the-box, the MicroLux® Half-Ton
with optional tooling (below). Includes press with 3/32” machine: shear, bending brake and slip roll. Turning the Arbor Press gets the job done like no other. There are
press tip, die bore plug, ram thumbscrew, adjustable nylon crank shears metal and plastic sheet to exact length. The other models on the market, but ours is the first to include
gib and instructions. Constructed of steel and aluminum center bending brake makes bends up to 90˚, and contains a specially designed locking work table that not only
alloy. Base is 7” x 3”. Throat depth is 4-1/4”. 4 adjustable V-shaped carbon steel dies for making rotates 360˚, but can be positioned up to 3/32” from center
#83539 Press-It. List $103.95 . . . Our Price $79.95 compound bends. The 3-roller slip roll forms curves, (3/16” total travel) anywhere within the X and Y planes.
cylinders and cones in metal and plastic sheet, and forms This makes “jigging” of the press for special applications
#82878 Drill/Tap Holder Accessory for Press-It $40.95 gentle curves in wood sheet and metal tubing. Includes easier than ever before, along with providing the precision
#83708 9-piece Tooling Set for Press-It includes 1/16” positioning guide for square cuts, spring-loaded shear detail adjustment needed to “land-the-ram” exactly and
tip; bored cone for pointed axles; 3/16” blank; oversize 1/2” hold-down plate, and depth stop for making duplicate repeatedly when your work calls for off-center pressing.
O.D. tip; center punch tip; and 1.5 mm, 2 mm, 3/32” and parts. Maximum sheet thickness: 1/32”. Maximum width of Other innovations include on-board tooling storage, and
1/8” bored tips. $19.95 shear/brake/roll: 8”. Crank can be moved from one end to a special adapter designed to hold our highly useful
the other. Fully adjustable for precision fabrication. punch and die sets, which are available separately at left.
#83709 9-piece Hole Punch Set for Press-It includes
one punch and one die in each of the following inch sizes: #86556 3-in-1 Metal Worker #87402 MicroLux® Half-Ton Arbor Press
1/16, 5/64, 3/32, and 1/8, plus adapter needed to mount List $320.00 . . . Our Price $249.95* List $140.00 . . . Our Price $114.95
punch to bottom of ram. Note: Maximum thickness for all
hole punching is .020” half-hard brass or equivalent. With a Quick Flip of the Handles,
List $66.95 . . . Our Price $39.95 SwitchGrip and StripGrip Are 2 Tools in 1!
#84424 V-plate for Press-It For removing wheels and Through clever design #88904
gears from axles. $3.95 and engineering, these
innovative multi-purpose
pliers combine the
functionality of two great
tools into one simply by
Unique rotating the handle.
Each plier features
Fiber Grip spring-loaded Jaws and
Tweezer ergonomically curved
Set handles with non-slip
grips for comfort
and control.
#89246 Throat-Less Metal-Cutting Rotary Shear makes #88905 #88906
clean, distortion-free cuts in annealed (soft) metals up to
10x faster than hand-held shears. The upper drive gear is
connected to the handle and has a reversible pawl which
draws the material into the beveled, hardened cutting
wheel with ratchet action. Make straight and left-hand
curved cuts in materials up to 1.5 mm thick x any length x
any width. Great for any metal shop. $79.95

#88904 Mini SwitchGrip Dual Jaw Plier includes a

#88038 8-piece Fiber Grip Tweezer Set with Leather
diagonal jaw cutter for wire and plastic, and a long nose
Case This set of exceptional tweezers is perfect for use in
plier with serrated tips, built-in 12 gauge and 16 gauge
many applications, including jewelry work, brazing,
wire strippers, plus terminal crimper and jaw lock. $23.95
soldering and any type of small parts handling. Set
features 6 cross-lock type (self-closing) and 2 non-locking, #88905 SwitchGrip Dual Jaw Plier includes a flat nose
all with fiber grips that protect the user from excessive plier with pipe grip jaws and jaw lock, and a long nose
heat when soldering parts. Sizes range from 6-1/4” to plier with serrated tips, built-in 12 gauge and 16 gauge
6-3/4” long with serrated tips for sure grip. Cross-lock wire strippers, terminal crimper, and up to 10 gauge wire
tweezers include straight, oblong (5/16” to 1” capacity), #82747 Quick-Lock Milling/Drilling Vise Specially cutter. $24.95
round (5/8” to 1-3/8” capacity), square (1” to 1-3/4” capacity), designed vise adjusts quickly and easily to hold stock #88906 StripGrip Dual Jaw Wire Plier For solid and
angled and curved; non-locking tweezers have straight securely while drilling, machining and more. 2” wide x stranded wire. Includes a diagonal jaw wire cutter and
tips and open/close from 0 to 3/4”. 6-1/4” to 6-3/4” long. 5/8” deep jaws have grooves for holding round objects; crimper for up to 10 gauge, and 10 to 20 AWG wire
All are packed in a handsome zippered leather case. opens 1-1/2”. Overall height 1-5/8”. Made of machined stripper/gripper with jaw lock. Note: Handle grips are NOT insulated.
List $34.95 . . . Our Price $29.95 steel. $74.95 $24.95

52 • ORDER TOLL FREE 1-800-225-1066 *Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance. See our website for a video of this item in use
 Follow us on HAND TOOLS
Make Your Own Photo-Etched Parts with Pro-Etch!
Nothing adds the WOW factor to your models and miniatures like precision-crafted photo-etched metal
details…and now, with the revolutionary Pro-Etch System, you can make them right at home.
This is a true photo-resist metal etching system that employs advanced technologies and materials previously
available only to industrial users. It uses your computer, an inkjet printer, and materials included in the system
to achieve incredibly fine results. Virtually any small item that can be made from a flat piece of metal can be
created with the Pro-Etch System in a fraction of the time it would take using other tools and methods (if it
could be done at all). You can even create sophisticated 3-dimensional objects with a combination of careful
design and folding of the flat photo-etched pieces. In almost no time you’ll be making precision metal parts
with fine-line details you never thought possible.
Set includes: specially developed, high resolution, inkjet film (two, 8-1/2” x 11”) • Photo-resist material (one,
19” x 12”) • Brass and stainless steel sheet metal (one each, 6” x 12”) • Photo-resist laminating machine and
carrier sheets • Exposure frame and clamps • Sodium Hydroxide* developing/stripping solution (16 oz) • Plastic
developing/stripping trays • Etching tank with circulating pump • Ferric Chloride* etchant solution (16 oz)
• Metal-prep pad, plastic tweezer, measuring cup, apron, goggles and gloves • How-To manual to guide you
through each step of the process. See our website for refills.
Note: Maximum overall size of etched sheet: 3” square x .010” thick.
#83123 Pro-Etch System (ships by ground to 48 contiguous U.S. only). List $174.50 . . . Our Price $119.95
*Note: System contains chemicals that are highly caustic. Careful handling of these chemicals and good ventilation are prerequisites Model & accessories not included
for the use of this system. Not for use with aluminum.

#86325 Soft Touch Model Mat prevents damage Semi-Flat Retractable No.11
as you work on your projects. Textured
closed-cell foam keeps models from Craft Knife Can’t Roll Away
sliding around while you work. Pick up this unique tool and you’ll feel
12” x 18” x 3/8” thick. the quality immediately. Unlike
$14.95 other precision craft knives,
this unique design is
retractable with perfect
cutting angles at each
stop including 45˚ and
60˚. Only 5 mm thick,
Model, tools suitable for precise
and supplies work for left- and Etch Buddy is a superior-quality tool that you use to fold,
not included. right-handed users. Requires #89455 replacement bend and shape photo-etched flat parts into 3D objects
blades. #89355 Nova Retractable Craft Knife $12.95 with unparalleled precision and efficiency. It has a wide
assortment of finger widths and contours to accommodate
#89455 Nova No.11 Blades,
all shapes and sizes of photo-etch sheet up to 6-1/2” long.
120 Pack Designed specifically
The top plate may be rotated 180˚ for long, straight bends.
for use with our #89355
Note: For full length bends, we recommend substituting a
Retractable Craft Knife and
metal ruler, such as #10115 (sold separately), for the blade.
packaged in a money-saving
Unique features ensure perfectly square bends every
120 pack storage box. $17.95
time. Beautifully made of CNC-machined aluminum.
#86143 Etch Buddy Photo-Etch Bender
Retractable Cutter Allows for List $64.95 . . . Our Price $49.95
#88837 Adjustable Blade Exposure
Micro-Mark Cutting Mat Nova Slim Adjustable Auto Retractable The Best Way to Cut
Place this 18” x 12” mat on your Cutter allows you to make precision
workbench or even your dining room table Photo-Etched
cuts every time with adjustable
and never worry about knife damage again. $16.95 blade exposure down to 0.1 mm. Parts
Blade length adjusts from
0 to 40 mm and is safely
hidden when not in
use (user must hold Requires #89454
slider button while replacement blades.
cutting). #89356 Nova Safety Slim
Adjustable Auto Retractable
Cutter $9.95 The finely-contoured tips of the Xuron Professional ET
#89002 Cut-Align Ruler™ Set Uniquely designed rulers
feature a thin slot in the center which allows you to make Photo-Etch Scissor use a delicate shearing action to cut
#89454 Nova 30˚ Pointed-Tip,
straight, clean, precisely measured cuts every time. Set parts cleanly without distorting. Great for cutting sheet
9 mm Blade, Package of 10 Designed specifically for
includes 8” and 15” rulers with standard inch graduations, brass as well. Made of hardened steel with cushion-grip
use with our #89356 Slim Adjustable Auto Retractable
centering rulers and more. Made of strong crystal clear handles and spring return.
Cutter. Made of stainless steel, the blade is durable yet
plastic, you can see exactly where and what you are cutting flexible. Package of ten. $5.95 #84903 Professional Photo-Etch Scissor
for better accuracy and less mistakes. $22.95 List $34.00 . . . Our Price $27.95

#84738K 8-Piece Mini Sprocket Set

#1 #2 #3 #4 Includes 1 of each sprocket shown. All sprockets
are 5/16” deep. Hubs are 1/4” outside diameter,
#5 #6 #7 #8 except for #1, which is .236”. List $28.60 $18.95

NO. TEETH PITCH DIA. DIA. OVER CHAIN

#1 8 .318” .402”
#2 9 .356” .430”
Use these sprockets and chain to power animated #3 10 .394” .480” Bare Metal Foil is adhesive backed real metal, only .0005”
displays, robotics, model trains and other miniature #4 12 .471” .550” thick. It’s easy to apply, conforms to all curvatures and
mechanisms. They’re made of tough, self-lubricating, #5 15 .586” .675” allows details to show through. Includes two 6” x 12”
durable acetal resin and easy to use. All sprockets are #84791 Mini Chain $19.95 per foot
#6 16 .625” .720” sheets and instructions.
designed to press-fit on a 1/8” diameter shaft* and Pitch .1227; width .162; thickness .082;
the chain links snap apart for easy adjustment. #7 18 .702” .785” #81636 Ultra Bright Chrome $15.95
Sold only in increments of one foot.
*Knurling or pinning is recommended. #8 20 .780” .865” #80795 Matte Aluminum $15.95

See our website for a video of this item in use 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 53
 HAND TOOLS SUPPLIES
Precision cutting blades and knives for hobbycrafts, graphic arts and household use. All blades Micro Knife Handle
are crafted of the highest quality carbon steel with hard, sharp points and finely honed cutting edges. Holds the World’s Smallest
Surgical Blades
AA BB CC DD Micro Saws…
#11 Blades with Teeth! K L M N

EE FF GG HH JJ

KK LL MM NN
Excellent tools for
cutting plastic, soft
metal and wood in
Razor Sharp Blades for Use with No. 1 Knife Handle tight places and when a knife blade just
AA. #14360 No. 11 Blade (15) $6.95 CC. #36106 No. 13 Saw Blade (5) $5.95 won’t cut it. Set includes 6 blades...two
.010” thick x 40 tpi; two .010” thick x 30
AA. #14178 No. 11 Blade (100) $24.95 DD. #50279 No. 16 Blade (15) $9.95 tpi; and two .015” thick x 24 tpi…and Blades used for micro-surgery are held
5” long aluminum handle. Blades are in a super thin knife handle only 4-1/4”
BB. #36102 No. 10 Blade (5) $5.95 long x 3/16” diameter. Use for cutting,
made of premium quality steel.
carving and chiseling the smallest details
Razor Sharp Blades for Use with Nos. 2, 5 or 6 Knife Handles #14345 Micro Saw Set $12.95
on models, dollhouse furniture, duck
Micro Saw Blades decoys and other scale model projects.
EE. #14364 No. 23 Blade (5) $10.95 KK. #14362 No. 2 Blade (15) $9.95
#14346X2 .010” x 40 tpi, package Stainless steel handle with knurled grip.
FF. #14366 No. 27, 3” Saw Blade (5) KK. #14363 No. 2 Blade (100) $44.95 Blades are shown actual size.
of four $7.95/pkg.
$8.95 LL. #50280 No. 24 Blade (15) $10.95 #81067 Knife handle with
#14347X2 .010” x 30 tpi, package
GG. #36113 No. 22 Blade (5) $5.95 MM. #14365 No. 25 Blade (5) $9.95 of four $7.95/pkg. one of each blade shown $14.95
HH. #36111 No. 18 Blade (5) $4.45 NN. #36110 No. 15 Saw Blade (5) $9.95 #14348X2 .015” x 24 tpi, package K. #81084 #61 Blade, pkg. of 5 $5.95
JJ. #14367 No. 28 Blade (5) $13.95 of four $7.95/pkg.
L. #81085 #62 Blade, pkg. of 5 $5.95
M. #81086 #67 Blade, pkg. of 5 $5.95

A Precision Cutting Knives N. #81087 #67M Blade, pkg. of 5 $5.95

A. #14349X2 NO. 1 KNIFE The world’s best selling hobby, craft and graphic arts knife.
B
Aluminum handle, 4-7/8” long. Pkg. of two with two no. 11 blades. $7.95 Industrial Quality
B. #14351X2 NO. 2 KNIFE Larger diameter, slightly longer and heavier than the Razor Blades
no. 1 knife. Package of two with two no. 24 blades. $9.95
C. #36117 NO. 5 KNIFE Contoured plastic handle with metal blade lock. 4-1/4”
C long. Includes one no. 19 blade. $6.95

Surgical Scalpels…the Ultimate Cutting Tools

D. This genuine surgeon’s scalpel is excellent for fine intricate cutting in model making,
D graphic arts, craft and lab work. Stainless steel handle holds interchangeable blades
E made of surgical-grade steel. Set includes handle and two each of 4 blades shown.
#50281 Scalpel/Blade Set $11.95
F G H Scalpel Blades, package of 5 – $3.95 per package Our razor blades are a cut above any
you’ve ever used. They’ll hold their finely
E. #14570 #11 F. #14571 #10 G. #14572 #12 H. #14573 #15
honed cutting edges far longer than
ordinary blades. Made of high carbon
Protective Cutting Pads Heal Themselves surgical steel with steel backs. Once you
Place on your workbench or even your dining room table and never worry about use these, you’ll never go back to hard-
scratches or cut marks again. Pads actually heal themselves instantly after each cut. ware store quality. Packed 100 blades in
Surface stays smooth after thousands of cuts and blades will last longer. Made of 3 ply, a convenient dispenser box.
non-glare polyvinyl. Double sided for twice the life. You’ve got to try one to believe it. #14292 Razor Blades (100/pkg.) $10.95
#36133 Medium Cutting Pad, 8-1/2” x 12” $23.95
#36134 Large Cutting Pad, 12” x 18” $29.95 Deluxe Miter Box
Holds Stock Securely for
#89115 Revo Folding Utility Knife Revo’s quick blade-changing mechanism provides fast, safe blade
swaps and clever fold-up design allows it to easily slip right into your pocket or clip to your belt.
Super-Accurate Cuts
Open center ring provides extra grip for safety and support at any cutting angle.
Includes one standard two-notch, double-sided blade. List $25.00 Our Price $19.95
#89141 Utility Knife Blades, 2-Notch, 5-Pack $4.45
#89142 Utility Knife Blades, 2-Notch, Bulk Pack of 100 with Dispenser Box $33.95
#83231 Excel Super Deluxe Knife Set includes 6 knife handles and 37 assorted
blades for virtually any cutting job! Also includes a burnisher, sharpening stone
and hobby awl. All items are neatly organized and secured in a sturdy and
portable storage case. Excel blades are world-class. This is the only knife set you’ll
ever need. $69.95
Three twist-locking, cam-action clamp
Excel Rotary Knives cut faster, cleaner and easier without the hand strain caused pins install in holes in plastic base to
by scissors and utility knives. Make gentle, even curves hold stock up to 1/2” thick by 2” wide.
without really trying and zip across templates and Use extra-wide lip on front of miter box
straight-edges like lightning. Retractable to position against edge of workbench,
blade guard keeps your fingers safe. or hold in vise for even more security.
#86779 Excel Rotary Knife, Large Includes Zona® brand razor saw with
40 mm blade $14.95 fine-pitched 32 tpi blade and five slots
#86778 Excel Rotary Knife, Small for cutting at 30˚, 45˚, 60˚, 67.˚5 and 90˚.
20 mm blade $7.95 #83277 Easy Miter Box Deluxe $19.95

54 • ORDER TOLL FREE 1-800-225-1066 • OUTSIDE USA CALL 1-908-464-2984 See our website for a video of this item in use
 Follow us on SUPPLIES HAND TOOLS POWER TOOLS NEW ITEMS
Flash Master Flexible Blades
are Ideal for Removing Flash
R and Smoothing Seams
T

P Q #90038 Flash Master Blades Uniquely

S designed flexible blades trim flash and
smooth seam lines like no other tool you’ve
ever used, even in hard-to-reach areas such
as interior curves. Use on model kits, 3D
P. Precision Knife Set R. Now Your Knife Blades prints and more. Perfect for slim, delicate
A popular, all purpose knife set for modelers, miniaturists, wood- Will Last Twenty Times Longer parts. Package of 10 blades. Works with
workers, graphic artists and household use. Includes light, medium most popular blade handles and styles.
Patented saddle holds the blade at the exact sharpening angle
and heavy duty blade holders, nos. 1, 2, and 5 handles and 13 Handle not included. $9.95
for a razor-sharp edge in seconds. Pays for itself many times
assorted surgically sharp blades for unlimited cutting capabilities. over. Arkansas Whetstone sharpening block provides premium
Also includes an attractive wood storage case. Made in USA. sharpening ability at reasonable cost. For use with knife handles Get a Grip…
#60924 Precision Knife Set. Value $43.00 . . . Our Price $21.95 nos. 1, 2, 5, 6, and Soft Grip. Sharpens nos. 11, 16, 2, and 24 A FitGrip
blades. (Sharpener color may vary.)
Q. Deluxe Razor Saw/Knife Set #81619 Knife Sharpener $25.95
This complete set of razor saws, with tempered, nickel-plated #60882 Special honing lubricant, 1/2 oz. $4.95
steel blades, makes fine cuts in wood, plastic and non-ferrous
metals. Includes no. 5 knife handle, one 3/4” x 5” x 42 tpi blade,
one 1” x 5” x 42 tpi blade, one 1-1/4” x 5” x 24 tpi blade, one no. 15 S. – T. Stainless Steel Ergonomically
contoured and covered
keyhole saw blade, and 5 assorted knife blades. Mini Straight Edge Protects Your Fingers in smooth non-slip rubber,
#50284 Razor Saw Set $19.95 Cutting a straight line with a knife is easy and safe with our FitGrip #1 Knife Handles provide confident
#22118X2 Extra-fine Blade, 1-1/4” x 5” x 54 tpi $11.95 knob-held stainless steel straight edges. Just the right size for control while cutting a wide variety of
Extra Razor Saw Blades – Sold in Packages of Two hobbies, crafts and graphic arts work. materials. Knurled metal screw-type blade
#81860X2 3/4” x 5” #81861X2 1” x 5” #81862X2 1-1/4” x S. #14162 6” long x 2” wide x 3/32” thick $13.95 locking/unlocking system at the back end
x 42 tpi (2) $10.95 x 42 tpi (2) $10.95 5” x 24 tpi (2) $10.95 T. #60916 12” long x 2” wide x 3/32” thick $19.95 of the handle is leaps and bounds beyond
typical #1 Knife handles. Plus, opposing flats
on the handle prevent roll-way when the
Zona High Precision Razor Saws Hot Knife/Soldering Iron knife is resting on your work surface. Set
includes two FitGrip knife handles, each
is Great for Carving Foam with a #11 blade and protective cap. FitGrip
holds all of the following blade types: 5, 6,
10, 11, 12, 13, 15, 16, 17, 17A & 21.
#89114 FitGrip #1 Knife Handle Set $14.95

#82980 #82985

#82980 Multi-purpose Zona 4-in-1 Saw Set includes one 32 tpi razor saw blade for
cutting wood, one 52 tpi razor saw blade for cutting metal and plastic, two 24 tpi saber
saw blades for curved cuts in wood (1 regular and 1 push-style keyhole type), and one
finely finished 4” long wood handle with wing nut and screw for attaching blades (order
extra blades on our web site). $12.95
#82985 Zona Flush Cutting Saw has a 6-1/2” long x 1-1/4” wide flexible steel blade ideal
for flush cutting dowels, plugs and pegs without marring the surrounding surface. 16 tpi
x .012” thick blade cuts on pull stroke. 4” long wood handle. $12.95

Milliput…the Master Modeler’s Putty of Choice Worldwide

#86464 Combination Circle Cutter and
Milliput is the two-part, easy-to-use epoxy Compact, lightweight, 30 watt soldering Compass has an expanding beam that
putty that molds like clay and cures to the iron with steel barrel and heat resistant sets with slide rule accuracy. Sharp pivot
hardness of porcelain. Use for scratch build- handle develops up to 720°F. Pencil-point point and interchangeable razor-sharp
ing, sculpting, customizing repairing, pattern tip gets into the tightest places. Handle blades/pencil tips (included) let you draw
making, gap filling, and thousands of other stays cool while you work. Hot knife or cut circles up to 11-1/2” in diameter.
projects. Roll it as thin as 1/64” for making attachment is ideal for modeling, carving Includes protective rubber pivot pad.
super detailed scale parts. Can be sawn, and shaping rock faces and other features Works on paper, card stock, plastic, thin
drilled, filed, sanded and painted when cured. in foam. Also welds plastics. wood and cloth. List $11.50 Price $9.95
Smooths with a wet finger and cleans up with #17107 Hot Knife/Soldering Iron $24.95
water before it cures. Fully cured in 5 hours #86464BL 10 extra blades for above, plus
without heat or sooner with a hair dryer. #14360 Extra knife blades (15) $6.95 container. $5.95 3 or more $4.95/pkg.
#81004 Standard Grain Milliput, gray color, net wt. 4 oz $9.95
#81005 Superfine Grain Milliput, pure white, net wt. 4 oz $16.95 Miniature Chisel Set
Set of 7 sharply honed miniature chisels for
#81661 Five-piece Carving Set is great for
carving and shaping precise, intricate details
Milliput, wax, clay and more! Double-ended
into model surfaces. Made of surgical quality
stainless-steel carvers with round, triangular,
square, tear-drop and needle-point tips. mirror-finish stainless steel with 6” long grooved
Sharp cutting edges and knurled gripping octagonal handles for sure grip. Includes con-
surfaces give you precision control. Each is 7” venient storage wallet.
long overall. $24.95 #83253 Miniature Chisel Set $19.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 55
 HAND TOOLS SUPPLIES Follow us on

Miniature Lumber Yard #83557

Basswood Assortment
All Micro-Mark miniature lumber is clear, kiln-dried No.1 grade. Wood sheets are micro-sanded 8 pieces each in 23 most
both sides. Siding and moldings are precision milled and require no sanding. For cutting sheet popular sizes from 1/32” to
stock into narrow strips, we recommend Table Saw #87775 for thicknesses up to 1/4”. For sizes 1/4” for building structures,
thicker than 1/4”, and for plywood, use the MicroLux® Tilting Arbor Table Saw, #80463. railcar loads, and hundreds
of other uses. 184 pieces,
Our siding, hardwoods and plywood are also ideal for laser cutting! 12” long.
$65.95
BIRCH PLYWOOD
12” Wide x 24” Long Hardwood Dowel
1st Quality Aircraft Grade, Value Pack
Good 2 Sides
Price is PER PIECE Includes 10 each
Thickness Item # Price ea. of 1/8”, 3/16”, 1/4”
and 3/8” diameter
1/64” 50193 $21.95
1/32” 50194 $14.95 (9” long), plus 20 pieces
1/16” 50195 $15.95 of 1/16” diameter (12” long).
3/32” 50196 $19.95 #86409 Wood Dowel Assortment
1/8” 50197 $24.95
3/16” 50198 $13.95 (60 pieces…a $15.80 value!) Our Price $12.95
1/4” 50199 $16.95 Miter Box and Saw for Precision
PRECISION MILLED BASSWOOD STRIPS HARDWOOD SHEET 45° Cuts in Wood and Soft Metal
MILLED BASSWOOD SIDING 24” Long All 24” Long • Basswood – 4” Wide
3-1/2” Wide x 24” Long Mahogany and Cherry – 3” Wide Aluminum miter box with 1/16”, 3/32”, 1/8”, 5/32”, 3/16” and 1/4” slots to hold narrow strips
Size Pieces Price/
x 1/16” Thick (Thick x Width) Item # Pkg. Pkg. of wood or metal. Two 45° and one 90° cutting slots, machined for accuracy. 3/4”x 1-3/4”
BASSWOOD – 3 Sheets Per Package
Use for dollhouses, capacity. 5-1/4” long. Includes handle and 1-1/4” deep, 5” long, 24 tpi steel blade.
1/32” x 1/32” 80001 10 $9.95 Thickness Item # Price/Pkg.
model railroads, ship 1/32” x 1/16” 80002 10 $9.95
models, architectural 1/32” 50101 $14.95 #22114 Miter box/saw set $21.95 #22115 Miter box without saw $14.95
1/32” x 3/32” 80003 10 $9.95
models, dioramas 1/32” x 1/8” 80004 10 $9.95
1/16” 50102 $17.95 #22118X2 Extra 54 tpi blades (2) $11.95 #81862X2 Extra 24 tpi blades (2) $10.95
and more. 1/32” x 5/32” 80005 10 $9.95 3/32” 50103 $17.95
#36117 Saw/blade handle $6.95
1/32” x 3/16” 80006 10 $9.95 1/8” 50104 $21.95
A 1/32” x 1/4” 80007 10 $10.95 3/16” 50105 $21.95
1/4” 50106 $23.95
1/32” x 5/16”
1/32” x 3/8”
80008
80009
10
10
$11.95
$15.95 5/16” 50107 $32.95 Duplicating Jig for
1/32” x 1/2” 80010 10 $17.95 3/8” 50108 $35.95 Cutting Strip and Tube Stock
1/32” x 3/4” 80011 10 $17.95 BASSWOOD – 1 Sheet Per Package
1/32” x 1” 80012 5 $11.95 1/2” 50109 $16.95 V-shaped groove in precision-machined
B 1/32” x 2” 80013 5 $19.95 3/4” 50110 $21.95 fixture holds stock while cutting with a razor
1” 50111 $21.95 saw. Integral slot guides saw blade for perfectly
1/16” x 1/16” 80014 10 $9.95 2” 50112 $29.95
1/16” x 3/32” 80015 10 $9.95 square cut. Sliding gauge locks in place for cutting
1/16” x 1/8” 80016 10 $9.95 multiple pieces in lengths up to 3”. Works on any
MAHOGANY – 2 Sheets Per Package
1/16” x 5/32” 80017 10 $9.95 shape stock up to 1/4” in any one dimension.
1/16” x 3/16” 80018 10 $10.95 1/32” 82263 $14.95 Bolt to bench or hold in vise.
C 1/16” x 1/4” 80019 10 $13.95 1/16” 82264 $14.95
1/16” x 5/16” 80020 10 $13.95
Made of blackened steel.
3/32” 82265 $16.95
1/16” x 3/8” 80021 10 $16.95 1/8” 82266 $19.95 (Razor saw not included.)
1/16” x 1/2” 80022 10 $19.95 3/16” 82267 $21.95 #84388 Duplicating Jig $29.95
1/16” x 3/4” 80023 10 $23.95 1/4” 82268 $26.95
1/16” x 1” 80024 5 $15.95
D 1/16” x 2” 80025 5 $21.95 CHERRY – 2 Sheets Per Package
Miter Master Angled anvil assures
3/32” x 3/32” 80026 10 $9.95 1/32” 81673 $14.95
3/32” x 1/8” 80027 10 $9.95 1/16” 81674 $16.95 Makes Clean, Sharp Miters square cuts
3/32” x 5/32”
3/32” x 3/16”
80028
80029
10
10
$9.95
$10.95
3/32”
1/8”
81675
81676
$16.95
$19.95
in Plastic and Wood
$19.95/pkg. of 3 pieces 3/32” x 1/4” 80030 10 $13.95 3/16” 81677 $21.95 An excellent tool for ship modelers,
Item # Spacing 3/32” x 5/16” 80031 10 $15.95 1/4” 81678 $26.95 miniaturists, airplane modelers, model
3/32” x 3/8” 80032 10 $19.95 railroaders and picture framers! Cuts
A. Clapboard 3/32” x 1/2” 80033 10 $21.95
3/32” x 3/4” 80034 10 $23.95 SHIP MODEL DECK SHEETS miniature molding, model railroad
60796X3 1/32”
60797X3 1/16” 3/32” x 1” 80035 5 $15.95 3” x 22” x .050” Thick Price is PER PIECE timbers, dowels, plastic and wood
60798X3 3/32” 3/32” x 2” 80036 5 $22.95 Individual basswood strips glued-up structural shapes, strip stock, ship model Beware
60799X3 1/8” with black glue to simulate caulking. planking, even full size picture frame of cheap
60800X3 3/16” 1/8” x 1/8” 80037 10 $9.95 Very realistic and a great time saver.
1/8” x 5/32” 80038 10 $11.95 molding, and it can also cut your imitations!
60801X3 1/4” assembly time in half. Razor sharp blade
60802X3 3/8” 1/8” x 3/16” 80039 10 $11.95
60803X3 1/2” 1/8” x 1/4” 80040 10 $14.95 cuts across the grain with a clean, smooth shaving action
1/8” x 5/16” 80041 10 $15.95 and it’s as easy to use as a pair of scissors! Has left and
B. Corrugated Siding/Roof 1/8” x 3/8” 80042 10 $19.95
60806X3 .040” 1/8” x 1/2” 81287 10 $23.95
right hand, 45° miter fence and scored marks for lining
60807X3 1/16” 1/8” x 3/4” 81288 10 $29.95 Plank Width Item # Price ea. up stock for other angles. Precision made nickel-plated steel
60808X3 3/32” 1/8” x 1” 80045 5 $16.95 1/16” 60857 $22.95 handles and aluminum alloy anvil. Will cut stock up to 1/2”
60809X3 1/8” 1/8” x 2” 81289 5 $23.95 3/32” 60858 $19.95 thick x 1-1/2” wide. An industrial quality tool originally made
C. Scribed Sheathing 1/8” 60859 $19.95 to cut automobile interior trim.
3/16” x 3/16” 81290 5 $9.95 3/16” 60860 $19.95
60810X3 .025” 3/16” x 1/4” 81291 5 $9.95 #50348 Miter Master $34.95 #50349 Extra Blade $15.95
60811X3 1/32” 3/16” x 5/16” 81292 5 $10.95
60813X3 3/64” 3/16” x 3/8” 81293 5 $11.95 #81847 Micro Broaches Set The Only Way to Get a Wood Dowel Under 1/16” Diameter
60814X3 1/16” 3/16” x 1/2” 80051 5 $14.95
60815X3 3/32” 3/16” x 3/4” 80052 5 $16.95 List $25.75 Dowels smaller than 1/16”
60816X3 1/8” Our Price dia. are not available “off
60817X3 3/16” 1/4” x 1/4” 80055 5 $10.95 $16.95 the shelf,” so you can use
60818X3 1/4” 1/4” x 5/16” 80056 5 $10.95
60819X3 3/8” 1/4” x 3/8” 80057 5 $13.95 Great for our Draw Plate to easily
60820X3 1/2” 1/4” x 1/2” 80058 5 $16.95 micro filing, make them yourself. The
D. Board & Batten 1/4” x 3/4” 80059 5 $16.95 shaping, carving hardened steel plate has
1/4” x 1” 81294 2 $10.95 and creating the finest a series of sharp-edged tapered holes which range from approximately 3/32” diameter
60821X3 1/16”
1/4” x 2” 81295 2 $13.95 details in wood, resin and plastic. Stainless
60822X3 3/32” down to .020” diameter. To make a small-diameter dowel, clamp the plate in a vise, then
60823X3 1/8” steel spiral teeth never rust or clog and are
3/8” x 3/8” 80062 5 $13.95
contoured to remove material on the pull
draw a 1/16” round or square wood strip through the series of holes until the wood is
60824X3 3/16” 3/8” x 1/2” 80063 5 $14.95
stroke. Set includes one tapered to .020” shaved to the diameter you need. Overall size: 5-1/2” x 1” x 3/32” thick.
60825X3 1/4”
60826X3 3/8” 1/2” x 1/2” 81296 2 $8.95 dia.; the other to .033” dia. Wood handles #50330 Draw Plate. $51.65
60827X3 1/2” 1/2” x 3/4” 81297 2 $9.95 are 3/8” dia. x 4” long. Total length 5”.
#50200X2 Hardwood Dowels – .085” dia. (1/16” nominal) x 12” long, 10 pieces. $7.95

56 • ORDER TOLL FREE 1-800-225-1066 • OUTSIDE USA CALL 1-908-464-2984 See our website for a video of this item in use
 See Our How-To Videos on YouTube SUPPLIES HAND TOOLS
#89157 Alteco
Chop-It Makes Medium Viscosity
Accurate Super Glue for Wood
Finally, a super glue specifically
Miter Cuts formulated to instantly and
Easy securely bond wood to wood!
Also great for leather and other
porous materials. 1 ounce
Chop-It XL applicator bottle. $10.95
Makes Precision Note: As with other super glues,
Miter Cuts in Long Strip Stock safe handling is important.
See our website for details.
Ships by ground to
48 contiguous U.S. only.

One of the most useful tools for the hobbyist working in wood Modeler’s Multi-Tool Does it All!
or plastic strip material. Make perfect, feather-free miter cuts every
time with the 30˚, 45˚ and 60˚ guides included. An adjustable
stop permits the exact duplication of pieces. Excellent for model
ship planking, model railroad structures, plus hundreds of other 15” extra-long base with adjustable stop lets you duplicate long
uses. Comes completely assembled and includes 3 blades. Base pieces with ease. Handle may be positioned in 2 different
is 7-1/2” x 7-1/2”. Cuts material up to 3/32” thick. locations for left- or right-hand use. Cuts material up to 3/32”
#84046 Chop-It $36.95 #14292 Razor Blades (100) $10.95 thick using single edge razor blades. Includes pre-assembled
base, aluminum handle, 2 cutting guides, 2 cutting guide clamps
with thumbscrews, 2 razor blades and 4 non-slip rubber feet.
Sand-It Gives #86288 Chop-It XL $40.95 #14292 Razor Blades (100) $10.95
Precision
Finish on Duplicate-It Cuts Parts to
First, this is the most comfortable knife handle
you’ve ever used and the adjustable chuck will
Small the Exact Same Size hold every hobbycraft blade made. Second, it’s
Parts the finest pin vise we’ve ever seen. The brass
chuck and 4 collets will hold drill bits up to #41
(.096”). Closes to zero. Third, it’s an indispensable
hand vise for holding micro-size parts while
filing, drilling, cutting and more. The knurled
brass tensioning knob at the back end draws
all items tightly into the chuck. Handle and
vise head are molded nylon. All other compo-
nents are solid brass. 1/2” x 5” handle. 1/2” vise
Sand-It is designed to give you a quick, precision finish on wood, capacity. A beautifully made tool!
plastic and metal sheet and strip stock. Also works beautifully to #60531 Modeler’s Multi-Tool
square-up cut ends of brass tubing. Use whenever you need a List $50.00 . . . Our Price $39.95
fine, precise fit of parts, such as inlay work, marquetry and more.
Works on material up to 4” wide x 1” thick x any length. 4-sided
sanding block lets you have four different grits mounted at the
same time. Includes pre-set angle guides for 30˚, 45˚, 60˚ and 90˚ Designed for modelers working in sheet plastic, Duplicate-It works
plus protractor-type guide for any just as well on thin wood sheets, card stock and paper up to 5/32”
angle in between. thick. It squares the part, clamps it tightly while cutting and allows
#84048 Sand-It $31.95 you to make exact same-size duplicates easily. Accepts sheets up
to 8” wide. Use with razor blades supplied or any hobbycraft knife.
#86620 20-piece Sanding Strip
Set includes 5 each of 180, 220, #84047 Duplicate-It $32.95
320 and 400 grit strips. $10.95 #14292 Razor Blades (100) $10.95
Wood Strip Cutter
Razor Blades…with Teeth! with Micrometer Accuracy
Special-designed razor-thin blades are Cut wood strips quickly and easily with this
actually ultra fine saws with 70 teeth per precision cutter. One turn of the vernier hand
edge and only .005” thick. You’ll get the wheel moves the blade in precise 1/32” incre-
finest, smoothest cuts in plastic, resin and ments. Cuts strips up to 1/2” wide. Uses standard
wood without leaving large gaps in the material. You can even cut 1/32” off #11 blades for Balsa or #2 blades for harder
the end of brass tubing with ease. Double-edged for twice the life. Package woods. Made of tough glass-filled nylon.
of 5 blades. #85853 Ultra Fine Saw Blades (5) $16.95
#14568 Wood Strip Cutter $11.95
#86084 Ergonomically contoured Wood Handle for Ultra Fine Saw Blades (#85853, sold separately)
#14360 #11 Blade (15) $6.95
assembles in seconds and is comfortable to use. Handle is 6-1/4” long. $10.95 3 or more $7.95 ea.
#14362 #2 Blade (15) $8.95

Miter-Rite is World’s Smallest

Precision in Miniature Miter Box?
Next to our powered Miter/Cut-Off machine, this
is the finest miniature tool you can buy for making
perfect angle cuts in wood, plastic and soft metal. #86407K Micro Miter Box Super Value Package shown
Cuts are adjustable in 1° increments with a range of
65 ° on each side of 90°. Blade holder keeps blade Make the finest 30˚, 45˚ and 90˚ miter cuts in wood, metal and plastic
absolutely perpendicular to the base, assuring strips, rods and tubes up to .25” wide x any length! Excellent for cutting brass #89703 Assorted Laser Cut Shapes and Materials,
straight and accurate cuts. Made of tough “football tubing…especially very short pieces used for mast bands and other items. by Scientific Let your creativity run wild! This random
helmet” Cycolac plastic for a lifetime of use. Comes Includes adjustable stop for making duplicate cuts quickly and easily. Works best collection of laser-cut shapes and raw materials can be glued,
with one 54 tpi saw blade. Cuts stock up to 5/8” thick with our Ultra Smooth Saw Blades (#85853, available separately, above). Approx. sawn, drilled, cut, painted, decorated and added to a multi-
x 2” wide x any length. 5-5/8” long x 5/8” wide x 3/16” high. #86407 Extra-long Micro Miter Box $17.95 tude of projects. You get approx. 1/4 lb. of assorted “treasures”
#15215 Dobson Miter-Rite $39.95 per bag. Note: no two bags are ever alike and this image may
#86407K Micro Miter Box Super Value Package includes #86407 Micro Miter Box, #86084 Wood
or may not be indicative of what you get. $8.95
#22118X2 Replacement Blades (2) $10.95 Handle and 5 Ultra Fine Saw Blades for one special all-inclusive price. Value $45.85 Super Buy $39.95

See our website for a video of this item in use 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 57
 NEW ITEMS HAND TOOLS SUPPLIES
Another Ingenious Way to Sand and File from Inifini Model Innovative Clear Tempered Glass Files Allow You to
Precision filing and sanding in confined, tight and narrow See Your Progress as You Sand, File and Polish to Perfection!
areas is an ongoing challenge for makers. And even if Infini does it again! Starting with a crystal clear
you can find a tool that fits in the space, chances are, tempered glass substrate, Infini uses an ingenious
you won’t have the right grit. This ingenious Precision process to permanently bond only the abrasive
Sanding/ Filing system from Infini Model is the most material to the substrate, allowing you to see
clever solution to this problem we’ve seen. Starting with right through the file to the workpiece. Gone
six finely crafted photo-etched stainless steel wands in are the days of removing too much material or
2 mm, 3 mm, 5 mm and 10 mm widths, plus two triangle ruining the shape of a part because you couldn't
shapes, Infini provides eight adhesive-backed sheets of see it as it was happening. Use this 3-piece system
their exceptional sanding film in 400, 600, 800, 1000, #89826 to sand, file and polish – wet or dry – on plastic,
2000, 3000, 5000 and 7000 grit which you adhere to the resin, wood…even fingernails! When you’re done,
wand of your choice and cut to size. With this system, rinse with water to avoid buildup of sanding
you will always have the perfect size, shape and grit for residue and to ensure longer life. Each Clear File
the job, right at your fingertips. Use wet or dry. Two-pack Set includes one each medium (220 – 400 grit),
9” x 3-3/4” adhesive-backed sanding film refills for each fine (600 – 800 grit) and super-fine (1000 – 1500
grit available separately. See our website. grit) files.* Choose from 2 sizes: Small (3-1/2” x
#89381 Infini Model Precision Sanding/Filing System $31.95 approx. 1/4” x 3/32” thick) and Large (4-1/4” x 1/2”
x 3/32” thick). Get these and see what you’ve
Premium Ultra-Precision Softback Sanding and Polishing been missing! *Grits are approximate.
Sponges by Infini Model for Superior Quality and Longer Life #89825 Infini 3-piece Clear File System, Small $29.95
#89826 Infini 3-piece Clear File System, Large $29.95

Amazing “Easy Cutting Guides” are Ideal for Masking Projects

#88077 #88085K

Unlike regular sandpaper which is prone to wrinkling and tearing, the flexible, cushioned
sponge backing of Infini Model’s Softback Sanding Sponges is designed to follow the Perfect for modelers and crafters, we tracked down these hard-to-find precision cutting
contours of your project beautifully, resulting in a finer finish in less time. Softback Sanding guides because we need them, too! Until you try one, you just won’t believe how smooth,
Sponges can be used for dry or wet applications for maximum versatility. Dust and dirt clean and sharp the cuts you make can be using an ordinary hobby knife and a fresh blade.
caused by polishing doesn’t stick to the sanding sponges easily and they can be washed off. Delicate laser-etched grooves in the acrylic surface are almost too fine to feel with your
50% longer lifespan than similar products! Set of six single-sided 5-1/2” x 4-1/8” Softback finger, yet provide surgically accurate cuts with almost zero effort. Take it from us, you
Sanding Sponges includes one each 220, 400, 600, 800, 1000 and 1500 grit. 2-pack refills of need these! See our website for details. $19.95 each
each grit available separately.
#88073 Infini TYPE A #88074 Infini TYPE B #88075 Infini TYPE C #88076 Infini TYPE D
#88077 Softback Sanding Sponges, Set of 6 $12.95
NEW! EASY CUTTING GUIDES NOW AVAILABLE IN SEE-THROUGH CLEAR $19.95 ea.
#88085K Softback Polishing Sponges, Set of 4 $10.95
#90488 TYPE A, CLEAR #90489 TYPE B, CLEAR #90490 Infini TYPE C, CLEAR #90491 Infini TYPE D, CLEAR
…And, Ultra-Precision Softback Sanding & Polishing Sticks
What happens when you take the premium abrasives
above, make them narrower and more maneuver- Sanding Twigs Contour
able, add a semi-flexible plastic backbone for a
firm grip and added pressure when working and Smooth Narrow Spaces
in confined areas, AND make them double- These sanding “twigs” are only 1/8” square
sided for twice the life? You get this (some a little smaller; some a little larger) so
amazingly versatile Softback they easily reach, contour and smooth narrow
Sanding and Polishing Set. Set locations. The cushion-mounted abrasive is
of eight 6-3/4” x 1-1/8” Softback bonded to a plastic substrate for good flexibility
Sanding Sticks includes one each and durability. Use on metal, plastic, acrylic, wood
220, 400, 600, 800, 1000,1500, 2500 and ceramics. Plastic bucket containing approx.
and 4000 grit. 2-pack refills of each 300 twigs of assorted grits. Each twig is 6-1/2” long.
grit available separately. #84425 Sanding Twigs $29.95
#88086K Softback Sanding & Polishing Stick Set. List $52.00 . . . Our Price $27.95

Premium Elastic Sanding Film Set

Stretches, Wraps and Conforms Micro Sanding Wands for Delicate Control
Made with the same premium abrasives as above and These Micro Sanding Wands use 1/4”
electrostatically bonded to the thinnest, stretchy elastic wide, abrasive belts that can be used
backing, this unique sanding film goes where no conven- wet or dry and work well on almost
tional sandpaper dares to try! Use wet or dry. Set includes any material. Made of tough, impact
two each 220, 400, 600, 800, 1000, 1500 and 2500 grit resistant polypropylene with a spring
sanding films. 6-pack refills of each grit sold separately. loaded tensioning device that allows
a quick belt change. Color coded so
#88963 Premium Elastic Sanding Film Set $19.95 you can instantly identify different
sanding grits.
Precision File and Reamer Set Tips store conveniently #81471 Set of four includes one
Includes beautifully machined handle with inside handle each; Yellow, 400 Grit; Green, 320
brass collet chuck that holds the included Grit; Blue, 240 Grit; Red, 120 Grit
diamond-coated fine-grit tips: 3 reamers $17.95
and 1 flat file. Tips store inside handle.
Micro Sanding Wand Belts, 5 per package – $7.95/package
#85134 Precision Diamond-Coated File
#60388 400 Grit #60389 320 Grit #60390 240 Grit #60391 120 Grit
and Reamer Set. $23.95

58 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 Follow us on HAND TOOLS NEW ITEMS
Unique Metal-Etched Tools from Infini Models Diamond-Coated Taper File Sets from Infini Models, of Course
Perfect for modelers and makers, these precision-crafted stainless steel cutting guides and tools expand upon Infini’s
wide selection of unique and innovative products. Delicate metal-etched grooves in the surface of these two-sided cutting
guides are almost too fine to feel with your finger, yet provide surgically accurate cuts with almost zero effort.

#90235 #90236

These unique Diamond-Coated Tapered Steel File Sets include medium, fine and super-fine grits, perfect for finishing
narrow spaces, slots and more. The flat handles allow superior control over round file handles. Each file is 5” long with 2”
of diamond coating. #90235 profile tapers from 1/16” thick to just under 1/64” thick at the tip; #90236 profile tapers from
5/64” thick to 1/64” thick at the tip. Made in Korea. $22.95/set
#90235 Narrow (1/4” width) Diamond Taper File Set #90236 Wide (7/64” width) Diamond Taper File Set

Perma-Grit harnesses the remarkable properties of tung-

sten carbide to create some of the best abrasive tools you’ll
Front Back find anywhere. Use them for rapidly sanding, shaping,
forming and finishing a wide variety of materials with
#90067 Infini Metal-Etched Cutting Front Front
Mat “A” for Masking Tape $9.95 Back Back greater efficiency and durability than conventional abrasive
tools. With a hardness approaching that of natural diamonds
#88784 Flexible
and greater strength than steel and titanium, the tungsten Sanding Sheet, Coarse
carbide abrasives used in Perma-Grit tools will not load up
#88783 Flexible
or break down, cut equally well in any direction, and will
Sanding Sheet, Fine
outlast sandpaper and most other abrasive tools thousands
of times over. Custom-made anodized aluminum extrusion $13.45 each
handles are light, clean, easy to use and will never warp. Perma-Grit Flexible Tungsten Carbide
Perma-Grit tools are ideal for use on all woods, glass fiber, Sanding Sheet, 11” x 2” x .030”
carbon fiber, Kevlar, Plexiglas, Lexan, Perspex, acrylics, This versatile sanding sheet can be mounted to a T-bar,
plastics, polystyrene, ceramics, stone, horn, antler and more. sanding block, or workbench, and can also be cut and bent
Available in coarse grit (US 60/UK 180), medium grit (US to any shape with internal or external grit for any custom
80/UK 220), and fine grit (US 120/UK 320). Made in England. sanding application. Choose coarse or fine grit.

Front Back
#90066 Infini Metal-Etched Cutting #90064 Infini Metal-Etched Cutting #90065 Infini Metal-Etched Cutting
Mat “B” for Masking Tape $9.95 Mat “C” for Masking Tape $9.95 Mat “D” for Masking Tape $9.95

#88777 #88780
Sanding Block, Sanding Block,
Short, Coarse / Fine, Long, Coarse / Fine,
5-1/2” x 2” $27.95 11” x 2” $43.45
Perma-Grit Standard Tungsten Carbide Sanding Blocks, Coarse / Fine General-purpose sanding blocks are comfortable
#90068 Infini Metal-Etched French Curve Panel in the hand with their convex-shaped sides and 2 flat sanding surfaces; coarse grit one side, fine grit on the other. When
Line Scribing Guide Use with your favorite scribing #90071 Infini Metal-Etched Part Bending Tool placed on either edge on a flat surface, you are able to sand a perfect right angle without marring your table surface. Use
and drawing tools to mark and engrave graceful curves transforms flat photo-etched parts into complex the sanding block to profile and feather edges, block-sand large areas, square-off materials and shape a perfect dihedral.
on a multitude of surfaces and materials. $9.95 3D objects. Made of stainless steel. $9.95

#90073 Infini Metal-Etched Centering Drill #88781 #88782

Guide Plate is a simple and accurate tool for locating #90070 Infini Metal-Etched Arc Sander Contour Contour
the center point of round and square workpieces. Sandpaper Holder This beautifully-designed tool Sanding Block, Coarse Sanding Block, Fine
Suitable for round and square stock from 2.5 mm to allows you to easily sand rounded surfaces and 5-1/2” x 2” $29.45 5-1/2” x 2” $29.45
9.0 mm in .5 mm increments. Note: A 0.5 mm drill bit is complex curves, even in tight spaces. Simply cut your
required, but not included. For best results, use with sandpaper to size and insert the ends in the provided Perma-Grit Tungsten Carbide Contour Sanding Blocks, 5-1/2” x 2” Perma-Grit Contour Sanding Blocks offer users
#84781 Adhesive Transfer Tape (sold separately). $9.95 slots, then get to work! $9.95 the ability to round-off stock, sand fillets and much more. Comfortable in the hand with its convex shaped sides, these
unique sanding blocks feature convex and concave sanding surfaces.

#88778 #88779
45˚ Wedge Sanding 45˚ Wedge Sanding
Block, Coarse / Fine, Short, Block, Coarse / Fine, Long,
7” x 2” $29.45 11” x 2” $44.95
#90069 Infini Metal-Etched Rivet Marking
Perma-Grit Tungsten Carbide 45 Degree Wedge Sanding Blocks, Coarse / Fine
#90072 Infini Metal-Etched Beveling Shapers, 5-In-1 Tool Tap the top edge with a hobby hammer
Perma-Grit wedge blocks offer a different angle on sanding vs. common sanding blocks for working in tight corners. 45˚
10-Pack use these unique shapers to create a bevel or to create perfectly spaced rivet markings on a variety
angled ends on the aluminum block coupled with end-to-end grit on the sanding surface allows pinch-free sanding up to
furrow on both the inner and outer diameters of of materials. Can also be used as saw blades with our
a vertical wall and abrasive contact at a 90˚ corner angle. When placed on either edge on a flat surface, you are able to
plastic parts. $9.95 #60531 Modeler’s Multi-Tool, sold separately. $9.95
sand a perfect right angle. Use the wedge block to profile and feather edges, block sand larger areas, square-off and more.

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 59
 POWER TOOLS HAND TOOLS
Flex-I-File…A Unique Tool for Fine Professional Finishes High Quality
Flex-I-File smoothes the edges of fine slots, Sanding Blocks are
follows compound curves, and works into
tight interior angles. The spring action of
Comfortable and Easy-to-Use
the anodized aluminum frame maintains No-slip finger grooves and sure-lock clamps
constant ribbon tension for delicate keep sandpaper taut and securely in place.
control with hairline accuracy. Ideal for The block’s special design lets you to use
removing glue seams from castings or both sides before changing the sandpaper
smoothing turnings while still in the lathe. and includes a thin rubber pad attached to
Frames are 4” x 4-1/4”. Abrasive ribbons the work surface to prevent gouging.
are 1/4” wide x 4-1/4" long. Set includes Made in the USA of sanded hardwood.
3 frames and 16 assorted color-coded #60382 1” W x 8” L x 1-3/4” thick $19.95
ribbons. #60383 2” W x 8” L x 1-3/4” thick $24.95
#60619 Flex-I-File Set $26.95 #60442 Set of both blocks $39.95
Extra Flex-I-File Abrasive Ribbons, package of 12 – $6.95/package Replacement Sandpaper in 10 Foot Rolls, package of 2
1 inch wide – $5.95 (pkg. of 2)
#60620 150 Grit #60621 280 Grit #60622 320 Grit #60623 600 Grit
#60443X2 80 grit #60444X2 120 grit #82405X2 240 grit #60446X2 320 grit #60447X2 400 grit
2 inch wide – $7.95 (pkg. of 2)
A D #60449X2 80 grit #60450X2 120 grit #82406X2 240 grit #60452X2 320 grit #60453X2 400 grit

Premium Quality Tool Sets Store Bits in the Handle

Not cheap imitations! –These jeweler’s quality tool sets include beautifully machined
aluminum handles with non-slip knurled grips, precision collets and pocket clips.
#81845 Hollow handles store bits conveniently and safely.

#81650
#82121*

E
#81651

B *Note: Handle has no storage compartment

#81845 12-piece Micro File Set Includes 4” long micro-slim needle files in assorted
shapes. 5-3/4” long handle. $25.95
#82121 10-piece Riffler File Set* Includes 4” rifflers in assorted shapes. 4-1/2” long
handle. $25.95
#81650 3-piece Diamond Reamer Set Enlarges and deburrs tiny holes; cuts in any
direction. Includes 3 reamers: 2” long x 1/8” dia. tapering to a point; 1” long x 1/16” dia.
tapering to 1/32”; 5/16” long x 3/16” dia. with cone-shaped tip. 4-1/2” long handle. $17.95
#81651 Pin Vise/Drill Bit Set 0-1/16” collet. Includes 12 high speed steel drill bits in
C even numbers from #52 – #74. $24.95

Jeweler’s and Machinist’s Secret to Smooth Finishes in Tight Places

Round, abrasive cords and flat tape make it possible to smooth and
polish hard-to-reach places inaccessible to most conventional tools.
Excellent for use on miniature wood, metal and plastic turnings
while they’re still in the lathe. Both cords and tapes are
aluminum oxide, 16 yards each.
Abrasive Cords
F–G #12108 #12109
.055” dia., 120 grit $15.95 .030” dia., 200 grit $15.95
A. #33108 Swiss Pattern Needle File Set Use for removing, smoothing and shaping
steel, brass, aluminum, cast metal, plastic and wood. Can also be used for shaping small Abrasive Tape #12110 3/32” wide, 180 grit $16.95
turnings while still in the lathe. All files are approximately 5-1/2” long with 1/8” dia. shanks. #12117 Buy all 3 together and SAVE! $44.95
Sold in sets of 12 in a vinyl storage wallet. Medium cut. List $16.95 . . . Our Price $11.95
B. #83180 Micro-Size Needle File Set with Free Handle Our hard-to-find micro-size
needle files are 30% smaller than other files on the market. Fine cut for use on wood, metal #84824 21-piece
and plastic. 4” long with 1/16” dia. shanks. Includes 12 files plus FREE collet type handle “Everything” Set
for delicate control. Value $28.15 . . . Our Price $24.95 includes open end wrenches
4.0, 4.5, 5.0, 5.5, 6.0 mm;
C. #85147 Needle Rasp Set Use these extra coarse rasps for quick stock removal in wood, nutdrivers 3.0, 3.5, 4.0, 4.5,
plaster, stone, plastic, fiber and wax. 6-piece set, 1/8” dia. shanks. 5-1/2” long overall. $19.95 5.0 mm; hex key wrenches
D. – E. Diamond Coated Needle Files cut faster, last longer and leave a smoother finish 1.5, 2.0, 2.5 mm; flat blade
than ordinary steel files on virtually all materials. Diamond-coated on all sides. Shown screwdrivers 0.9, 1.2, 1.8, 2.4,
approximately 40% actual size. 3.0, 3.5 mm; Phillips head
D. #82250 Medium Grit Needle File Set. 10 assorted shapes. 5-3/4” long. $23.95 screwdrivers #0 and #1
and storage box. $21.95
E. #82249 10-piece Tapered Needle File Set. Includes 3 widths, each in extra fine, fine
and medium grits, plus 1 pointed round fine-grit file. 5” long. $23.95
F. – G. Reamers finish the job when drills can’t deliver an exact size hole. Use them for #81064 Miniature Vacuum Attachment Set
enlarging, deburring, shaping, cleaning and cutting holes in metal, plastic or fiber. Includes all the tools you need for cleaning even the most
delicate items in areas where a regular vacuum cleaner would
F. #26108 6-piece Reamer Set Hardened steel with easy grip knurled handles. never fit. Mini attachments include adapter, straight extension,
Hole size: .024” to .073”. 2-3/4” to 4” long. Includes plastic storage wallet. $23.95 curved extension, oval brush, round brush, crevice tool and
G. #85137 6-piece Larger Reamer Set for hole size .073” to .236”. 4-3/4” to 7-1/2” long. 36” long x 1/2” dia. hose. Compatible with any standard-size
Includes plastic storage wallet. $32.95 vacuum with 1-1/4” fittings. $9.95

60 • ORDER TOLL FREE 1-800-225-1066 • OUTSIDE USA CALL 1-908-464-2984 • OUTSIDE USA CALL 1-908-464-2984
 HAND TOOLS Follow us on

Gripster Grabs It Professional Quality Tweezers – Now in Titanium! Universal Cylindrical Tweezer
With most of our selection coming from the jewelery, watchmaking and dental
with the Push trades, these tweezers are among the finest quality you’ll find anywhere.
of a Button All except #60904 and #19110 are now available in titanium plated versions.

Swiss-Style Watchmaker’s Tweezer Cross-Locking, Self-Closing Tweezer

Press Serrated flat jaws. 6-1/2” long.
Fine, smooth points. 4-5/8” long.
the top of #19109 Satin-finish steel $9.95
this unique #19101 Stainless steel $7.95
#88577 Titanium plated $12.95 #88582 Titanium plated $19.95
tool and 4 slim,
stainless steel
prongs emerge
from the tip. Release, and the prongs close
around the object, grasping it securely. Curved Tip Swiss-Style Watchmaker’s
Perfect for tasks where fingers can’t reach Tweezer Smooth points. 4-5/8” long. Cross-Locking, Self-Closing Tweezers
Finally, one tweezer that does the job of
and tweezers aren’t strong enough, such #19102 Stainless steel $8.45 with Heat-Resistant Grips Stainless
many! The cylindrically-shaped channels
as positioning, inserting and starting hard- #88578 Titanium plated $12.95 steel. Serrated tips. 6” long. $7.95 each
at the tips of this unique tweezer act as a
to-hold mini screws, nuts and other small #60904 Straight #19110 Curved
universal holder, allowing you to grasp
parts. Set includes two Gripsters, one and manipulate all kinds of screw heads,
4-1/2” long and one 6-1/4” long. Prongs including round, hex, flat, fillister, socket
open to a maximum capacity of 5/8” and Boley Style GG Tweezer Flat, Smooth Decal/Stamp Tweezer
Hollow, very light spring tension. and set-type. Easily pick up washers, nuts
extend 1/2” from tool tip. #60907 Stainless steel, 4-1/2” long $8.95 and beads as well. And, because the 5/16”
Smooth points. 4-3/4” long. #88588 Titanium plated, 4-1/2” $12.95
#88022 Gripster Set long cylindrical channels run all the way
#19103 Stainless steel $8.95
List $13.95 . . . Our Price $9.95 Micro Tweezers Fine, serrated points. to the tip, it will allow you place items pre-
#88579 Titanium plated $12.95
Approx. 3-1/2” to 4” long. cisely where you need them. A great tool
Special Tweezer Places Objects for holding those tiny model ship blocks,
Without Damaging too! Made of non-magnetic stainless steel,
Double Bend Dental Tweezer #60102 Straight tip, stainless steel $7.95 approx. 5” in length. Tips grasp objects
Fine Details Fine serrated points. 6-1/2” long. #88585 Straight tip, titanium plated $12.95 from 5/64” to 1/2”.
#19105 Stainless steel $10.95 #87119 Universal Tweezer $10.95
#88580 Titanium plated $14.95
#60885 45° Curved tip, stainless steel $7.95 Stainless Steel Tweezer Set
#88586 45° Curved tip, titanium plated
$13.95
Slide Lock Soldering Tweezer
Stainless steel Medium sharp points. 4-3/4” long.
tweezer with rubber- #19106 Stainless steel $7.95 #60886 90° Curved tip, stainless steel $7.95
coated angled tips are #88581 Titanium plated $14.95 #88587 90° Curved tip, titanium plated
perfect for no-mar, non-slip placement of $13.95
small, irregularly shaped items, such as the Giant long reach tweezer. Serrated rounded points. 12” long.
figures shown above. 6” long. #81010 Stainless steel $12.95 #88589 Titanium plated $22.95
#83251 Rubber-Tipped Tweezer $7.95

Great Tweezers, Great Price

Pearl Tweezer – The Best Way to Grip Small, Irregular Objects These stainless steel tweezers are made
Spherical indentations in the tips of our exclusively for Micro-Mark by a manufac-
Pearl Tweezer securely grip round and turer of surgical quality instruments.
irregularly contoured small objects, Beautifully polished, all purpose set lets
preventing them from flying off into you grasp, position and manipulate the
space and disappearing forever. Perfect smallest of items. Made of stainless
for placing miniature hardware and steel, gives you a lifetime of service. Set
tiny detail parts. Made of satin-finish contains 4-1/2” sharp point, 4-3/4” flat
Set of 8 tweezers made of acid-proof, anti- stainless steel; approx. 4-1/2” long. point, 6” blunt point, 6” bent sharp point,
magnetic, stainless steel for a lifetime of #82426 Pearl Tweezer $13.95 6-1/2” cross locking tweezers.
use. Includes extra fine, fine, angled and #60365 5-piece Stainless Steel
#88590 Titanium Plated
long tips. Overall length: 4-1/2” to 5-1/2”. Tweezer Set $24.95
Pearl Tweezer $19.95
#84256 8-piece Tweezer Set $19.95
Crocodile Action Ear Polypus Stainless Steel
Pic•n•Stick… Mini Tweezer Set
a Unique Way
to Hold Things

#82561 #60357

#15265

The Polypus is a brilliantly designed surgical instrument for

A nicely made, never-rust set that’s about
removing foreign objects and performing surgery inside the ear.
40% smaller than other sets we sell,
Unlike a hemostat, only the “crocodile” jaws at the very end open.
Pic•n•Stick is a 2-1/2” long plastic stick with making them ideal for handling micro size
You can actually pass the end through a very small hole and still open and close the jaws!
a waxy adhesive on one end. To use, just items. Includes self locking, needle point,
An extremely versatile tool for placement and retrieval of micro-size objects. Use for ship
press the adhesive end against the part angle point and flat smooth point. The
model rigging, dioramas, dollhouse miniatures, model railroad car interiors and any other
you need to hold. To remove, just twist. flat point is good for applying decals and
micro-manipulation. Precision instruments crafted of highly polished stainless steel.
Adhesive grips tightly, but won’t transfer to other items that could be marred by sharp
the part. Each stick can be reused many times. #15265 Ear Polypus (Narrow part of “neck” reaches 2-1/2”; fits thru a 5/32” hole) $22.95 points. All tweezers are approx. 4-1/2” long.
Comes in 2 matchbook-style packages. #60357 Ear Polypus (Narrow part of “neck” reaches 4-1/2”; fits thru a 3/16” hole) $25.95 #60699 Mini Tweezer Set
#80339 Pic• n • Stick (30) $14.95 #82561 Ear Polypus (Narrow part of “neck” reaches 10-1/2”; fits thru a 1/4” hole) $49.95 List $18.00 . . . Our Price $12.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 61
 HAND TOOLS SUPPLIES
Deluxe Lighted Magnifier
Optivisor
Adjusts to Four Magnifications
Professional Series Set Desktop LED
Includes Optivisor headband Lamp with
magnifier described below, six
lens plates (1-1/2x, 1-3/4x, 2x, Magnifier
2-1/2x, 2-3/4x,
3-1/2x) and
attachment
loupe, plus
VisorLIGHT...
a detachable,
AA battery-
powered, laser-sharp
spotlight which produces an intense 6,000 candle Our deluxe headband magnifier not only
power collimated beam of light…all packed in a sturdy has twin-beam, focused lighting, but also
carry/storage case with fitted foam interior. lets you select the magnifying power you
#84431 Professional Optivisor Set. Value $409.95 . . . Our Price $299.95 need with just the touch of your finger.
Contained under the hood is a special
Binocular Magnifier for Hands-Free Magnification flip-down auxiliary lens plate you use in
The Optivisor Magnifier gives 60 LEDs providing 1200 lumens of diffuser-softened combination with the attachment loupe,
you 3-dimensional viewing by light at the end of a flexible, omni-positionable 18” providing magnifications of 1.8x, 2.3x, 3.7x
providing magnification for arm wrap your work in a cool glow similar in strength and 4.8x. The comfortable headband can
both eyes. Optical quality glass to a traditional 75 watt bulb, great for all kinds of be worn with glasses and adjusts to any
lens magnifies objects 2-1/2x desktop projects. For detail work, flip the lid to reveal size with a Velcro-type fastener. Optical
at a working distance of 8”. a 5” diameter, 3 Diopter lens (1.75 magnification) with quality acrylic lenses. Requires four AAA
Additional interchangeable a comfortable 8” focal length. Increasing this lamp’s batteries (not included). High quality.
lens plates are available versatility is a handy 4 compartment storage bin at #81838 Lighted Magnifier $39.95
separately for other the back of its no-tip base for small tools, pens and
magnifications (see chart more. 6’ cord. 120V/60hz. 4-Armed Holding Jig for
below, left). Comfortable, #88821 Desktop LED Lamp with Magnifier $49.95 Gluing, Soldering, Painting,
light-weight leather headband
has orthopedic felt padding
Inspecting and More
and is fully adjustable to fit all
Extra Lens Plates for above head sizes. Tilts up and out of LED Lamp / Magnifier Puts
$36.95 each the way when not in use and
can be worn over glasses. Shadow-Free Light Just
Item # Magnifies Working Distance
#52387 1-1/2x 20 inches
Attachment loupe shown Where You Want It
is optional (doubles the
#52388 1-3/4x 14 inches
magnification of any lens
#52389 2x 10 inches plate) – order below.
#18108 Optivisor Binocular Magnifier $64.95
#18110 Attachment Loupe for above magnifiers only $19.95

Custom-Fit Lighting for

Your Optivisor This “third hand” securely holds small
objects in any position and leaves your
hands free. Especially useful for solder
assembly of multiple components. Clamps
hold your first joint together so if you heat
it again to add items, the first joint won’t
fall apart. Includes 4 alligator clamps, 2”
Optivisor
not included. magnifier and magnet. 5” long flexible arms
bend to any position. Set screws in base let
The Quasar Lighting System is designed specifically for use with the Optivisor you use the six components in any combi-
binocular magnifier (above). Employing the latest in LED technology, Quasar nation. Includes clamp for mounting base
lighting surrounds each lens with ultra-bright beams of white light that to any workbench up to 1-1/4” thick.
reduce shadows and increase visibility…especially good for viewing in holes The sturdy, all-steel articulated arm of our Lamp / #60682 Four-Armed Holding Jig
and deep cavities. And the super-efficient LEDs require little power…so the Magnifier puts the power of 90 long-lasting LED lights List $22.50 . . . Our Price $14.95
batteries can last up to 96 hours. Includes two Energizer ® AA batteries, right where you want them, illuminating your work
mounting strap, mounting pins and battery compartment. Works with #18110 area with brilliant, cool white, shadow-free light.
Unlike fluorescent lamps, this 7 watt, 1000 Lux #85095 Helping Hand
optional attachment loupe sold separately. Installs in less than a minute.
LED-equipped model is completely silent and the Magnifier 2-1/2”
#83518 Quasar Lighting System for Optivisor $29.95 diameter, 4x
light is strong and continuous; no annoying hum or
distracting flicker. The 5” diameter optical quality lens magnifier and
2 alligator-
Clip-On Magnifiers Flip Up for Normal Vision enlarges to 1.75x actual size at working distance of
type spring
13” (3 diopter). Convenient bench-mount clamp
These magnifying lenses let you clamps
attaches in seconds to any tabletop up to 2-3/8” thick.
instantly switch between close- mounted in ball
Spring-balanced arm extends up to 36”, providing
up and distance viewing. Simply joints. Plated
excellent mobility, and the integrated lock knobs keep
clip them onto your regular steel with iron
the lamp exactly where you want it while you work.
glasses. To see close, flip them base. $10.95
down. For normal vision, flip #86547 Articulated LED Lamp with Magnifier $79.95
them up. Large optical quality
acrylic lenses mount directly in Illuminated Telescoping Mirror
#86416
front of your glasses to eliminate
double vision. +2.00 power lenses magnify 1.50x at a working
distance of 19”. +4.00 power lenses magnify 2.00x at a working distance of 10”. 1-5/8” x 2-1/2” swivel-necked mirror
#82078 +2.00 Magnifiers $10.95 #82080 +4.00 Magnifiers $10.95 extends to 34”. Twin bright-white LEDs provide brilliant light
in dark areas; controlled by on-off switch located on rear of mirror.
#86416 Set of both Clip-On Magnifiers (one each). List $21.90 Our Price $16.95 Includes cushion grip and batteries. #86542 Illuminated Telescoping Mirror $16.95

62 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
Follow us on SUPPLIES HAND TOOLS NEW ITEMS
These Unique, Adjustable-Focus Magnifying
Glasses Are the Only Pair You’ll Ever Need!
Introducing Eyejusters…the most versatile
magnifying glasses you’ve ever seen! With an
adjustable strength range of +.50 to +4.00 Diopter,
Eyejusters enable the user to go from painting, Choose from 3
assembling, detailing and repairing models and Great Styles!
countless other projects to reading, working on a
computer, or even fixing plumbing under the sink! #89491 Zoom
A simple turn of the hidden eyeDials™ changes Hands-Free
magnification instantly. $89.95 each Magnifier with
Classically styled Eyejusters are available in: LED Light
This new high-
#87918 Tortoise #87919 Black #88027 Stainless Steel Gray
tech spin on the
concept of the visor magnifier includes
Take Professional-Quality Photos in Your Home or Shop five interchangeable lenses from 1x to 3.5x
Ideal for miniatures, collectibles, insurance records and web auctions! magnification, protective lens case, elastic
American Recorder Technologies Photo Studio In-A-Box® SIB-110 is a light- comfort headband and microfiber cleaning
weight, portable stage that unfolds easily to set up on desktop, workbench or cloth. Requires three AAA batteries (not inc.) $29.95
dining table. Use it with your camera to produce well-lighted images with
balanced color and remarkable definition. The SIB-110 is the next generation in
desktop photography and is better than ever, utilizing the latest LED technology
for improved brightness, higher efficiency and long LED life. In addition, the
SIB-110 includes four seamless, non-reflective, untextured backgrounds in white,
black, medium gray and warm beige to enhance versatility and
creativity! NEW! All 120 LEDs are INSIDE the box!
Great new features include: 16” x 16” x 16” photo box produces
a beautiful, even, overall light while reducing shadows and glare;
120 super-bright, cool-running, built-in LEDs; daylight temper-
ature illumination for most accurate color rendition and clearest
detail; four interchangeable backdrops for maximum variety and
#89907 Micro-Mark Lens Cleaner safely
contrast; adjustable camera stand; power supply
and quickly cleans glass and acrylic eye-
plugs into standard household outlet.
glasses, sunglasses, magnifiers, goggles,
#89511 Photo Studio In-A-Box SIB-110® safety glasses, and more. To use, gently
List $159.95 . . . Our Price $134.95 squeeze the soft-touch pads until they
#89513 10” Ring Light (not shown) includes 19” to 65” touch the surface, then simply wipe away
Camera and model are not included. adjustable tripod, 3 light modes and phone mount. smudges, dust, etc. $14.95
See our website for complete details. $34.95 3 or more $7.95 ea.

#89333 Professional Wide Base Vertical #90470 iGaging

11-piece Marking Steel Mini Squares 7” Layout Square
and Measuring Set Precision CNC-machined
List $61.95 solid aluminum blade
Our Price and magnetic base for
$48.95 guaranteed 90° square.
Single-frame construction
with anodized finish and
precision laser engraved
markings on both sides of
2 mm blades, and marking
holes set for every 1/16”.
Squareness: 0.0002” per inch;
Scale accuracy: 0.001”.
Includes case.
$39.95
Count on these specially designed, hardened and machined Steel
Set includes: 6” metric/standard ruler with a conversion chart on the back; 9” protractor Mini Squares to make the most accurate and true markings you’ve
with depth gauge; 6-1/2” bore/cylinder gauge; 48-leaf screw and pitch gauge with ever seen. Notched inside corner prevents accumulation of debris.
standard and metric markings; 2” screw-cutting profile gauge; 4” angle setting gauge; #89328 Wide Beam Mini #89329 Wide Beam Mini #89330 Wide Beam Mini
4” machinist square; 5” marking awl; 4” brass vernier caliper; 5” brass automatic center Square, 2” $15.95 ea., Square, 3” $19.95 ea., Square, 4” $24.95 ea.,
punch and 7” steel square-legged divider; all packed in a sturdy, foam-lined case. 2 or more $14.35 ea. 2 or more $17.95 ea. 2 or more $22.25 ea.

Palm-Size Micro Measurement #89750 iGaging #89751 iGaging 4” and 7” Bench Square
Rollbot Multi- Set These versatile, high-precision tools
Function feature a 2 mm thick CNC-cut stainless
Tape-Less steel body, laser engraved markings and
Measuring blue anodized aluminum base.
Tool uses a Use for fine joinery work and
serrated ring furniture-making, as miter
around its edge and try squares, line
to roll like a wheel scribing, saw guides
across any flat, curved, and more. 1/32”
#87942 iGaging Lighted 10x Measuring #87779 or irregular surface with the measurement and 1˚ angle
Magnifier features distortion-free lenses Precision Double appearing on a digital LCD. Rollbot not only graduations.
and 8 bright LEDs for super-accurate close- Square Set, 4” and 6” Rulers easily measures linear dimensions like the Includes
up work and precise 0.0005” scale micro slide in lockable groove; marked with length of a board; it can also calculate the pencil.
measurement of length, diameter, radii, easy-to-read 8th, 16th, 32nd, and 64th inch square inches of a board face, board feet, $84.95
angles, pitch and thickness. Includes lined graduations. Precision ground beam meas- the round area and diameter of cylinders,
leather case with snap closure. A high- ure 1-7/16” long x 1-1/16” high x 9/16” thick and corner and inside measurements.
quality ISO 9001 certified measuring for 4” square; 3-3/4” long x 1-1/4” high x 5/8” Rollbot handles any size up to 144”, at up
instrument. List $64.95 . . . Our Price $57.95 thick for 6” square. $34.95 to 18 feet per second. $27.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 63
 HAND TOOLS

A B A. Digital Scale Reads in Ounces and Grams

High-precision, 11 pound (5 kg) capacity weight scale with digital readout in 0.05 ounce
or 1 gram increments. Includes tare feature and auto shut-off to conserve power. 5”
diameter platen.
#83825 Digital Scale. List $40.00 . . . Our Price $29.95

B. Special Squares for Marking and Cutting Thin Materials

Use our Thin Beam Squares to mark and cut thin wood and plastic. The extra-thin profile
NEW of the beam allows the blade to stay in close contact with the surface of the workpiece,
45˚ Version! so scribe lines and knife cuts will be super-accurate. 90˚ version works on sheet and
strip stock up to 4” wide and as thin as 1/16”; 45˚ version works on sheet and strip stock
up to 2-3/4” wide (or 5-1/2” wide by flipping the square over to the opposite edge) and
as and as thin as 1/16”. Blade and beam are 3/4” wide. Made of ground steel.
#83261 90˚ Thin-Beam Square $19.95 NEW! #89813 45˚ Thin-Beam Square $19.95
Thin-Beam Square Regular Square C. Absolute Origin Digital Caliper Has Data Capturing Capability
C Absolute origin technology memorizes zero by displaying the actual sensor position,
making resetting to zero obsolete. Combined with data capturing capability from its
built-in data port,* this caliper is one of the most sophisticated measuring instruments of
its kind. Includes hardened stainless steel ruler beam, moisture-resistant housing, two 3V
lithium batteries, and fitted foam-lined polymer case. ISO 9001 certified. *Requires #86717 USB
Interface and Cable, sold separately on the next page. #87943 Absolute Origin Digital Caliper $57.95

D D. Center-Finding Rulers Eliminate Complex Calculations

Find the exact center of circles, squares and rectangles quickly and accurately without
tedious math. Simply equalize the readings on each side of zero and mark the center.
#86507 Heavy Duty 12” Stainless Steel 2-sided Center-Finder Ruler is marked in 16ths,
8ths, 32nds and 64ths of an inch, plus markings for bevel angles of 15, 22.5, 30, 45, 60
and 90 degrees. 2” wide with hang-up hole. $11.95
#14421 12” Stainless Steel 2-sided Center-Finder/Conventional Ruler is graduated in
E F 16ths and 8ths on the center-finder side with conventional ruler (non-center-finder)
32nds and 64ths graduations on the back. 1” wide. List $17.95 . . . Our Price $12.95

E. Pocket-Size Micro Measuring Set

Pocket-Size Micro Measuring Set combines all four of our pocket-sized analog measuring
tools in one handy, money-saving package. Perfect for measuring just about every
miniature project, including: model structures, ships and airplanes, scratch-built pieces,
dollhouses and accessories, plus dozens of applications in woodworking, turning,
sanding, machine tool setups, and more. Set includes the following micro pocket-size
tools: #88499 Outside Caliper, #88500 Inside Caliper, #88501 Divider Caliper, and #88502
Two-Inch Try Square, plus a segmented vinyl storage pouch.
#88503 Pocket-Size Micro Measuring Set. List $52.80 . . . Our Price $34.95
Each Pocket-Size Micro Measuring Tool is also available individually:
#88499 Outside Caliper $10.95 #88501 Divider Caliper $10.45
#88500 Inside Caliper $10.95 #88502 Try Square, 2” $10.45

F. Proportional Divider Scales Drawings Up or Down in Seconds

No need to measure, calculate and re-measure when working from scale plans and
drawings. Our proportional divider does it for you. Moveable pivot point adjusts ratio
one end to the other. An all-metal precision instrument. Instructions included.
#14129 Proportional Divider. List $140.00 . . . Our Price $134.95

G. Dimensioned Mini Square Cuts Layout Time in Half

Our mini square has markings on both the outside and inside edges so that measuring and
marking is quick, easy and accurate. And it’s made of stainless steel, so it also works as a cut-
G ting guide for your knife. Especially handy for measuring and cutting scale model window
openings and glazing. 3” x 4” overall with acid-etched 1/32” increments for a lifetime of use.
#82147 Mini Square $9.95

H. Stainless Steel Model Railroader’s Ruler

Scale graduations in HO, O, S and N, plus inch and millimeter calibrations. Also includes
H a decimal equivalent chart and reference table on the opposite side. A versatile ruler for
the model railroader. 1” wide x 12” long. Stainless Steel.
#10116 Model Railroader’s Ruler $13.95

J. Rotape Compass Measures and Draws Large Circles Instantly

Using the Rotape is fast, easy and accurate: simply place the compass point on center,
J K
pull the tape out to the desired radius (between 3-1/2” and 6’), and draw your circle.
Rotape marks paper, wood, cork, drywall, metal, fabric, concrete, plastic and more. And
a special gauge is molded into the bottom of the pocket-size tape housing so you can
also mark lines parallel to an edge.
#82624 Rotape Compass $39.95
#82626 Rotape HB Pencil Leads – package of 10, pre-sharpened $5.95

K. Clamp-On Trammel Points

Clamp-on Trammel Points attach to beams up to 1-1/4” thick by any width or length.
One end has a hardened steel point to act as a pivot. The other end is dual-function:
holds either another point (included) or a standard pencil.
#83187 Clamp-on Trammel Points $13.95

64 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 HAND TOOLS Follow us on

L Use Incra Rules for Precision Measuring & Marking

Uniquely designed precision rulers feature micro-fine guide holes and
slots at every 1/16”, 1/32” and 1/64” scale position to instantly locate
T your sharp pencil or scriber at the exact measurement point every
Improved and time. Perfect for a wide range of projects where accuracy is critical to
better than ever! the job at hand, Incra’s patented marking rule design is the standard
by which all others are measured. Proudly made in the USA.
See our website for details and our full line of Incra Rule products.

M Q
Precision Precision Marking #81874
Marking Rule Rule Set 6” x 3” Precision
#81565 6” $16.95 #81568 6” $69.95 X-Y Marker
#81569 12” $25.95 #81572 12” $102.95 $42.95
Housing
may vary

V #10115
N

#81668 12” Precision #81643 Precision Bend Rule

#84174 Centering Rule 6” Precision Marking #81567 6” $21.95
Housing
may vary
R $31.95 Protractor $42.95 #81571 12” $31.95
W #89344 Incra Tiny “T”
Rule, Metric. Features
P S marking holes at every
1 mm, .5 mm and .25
mm from 0 to 75 mm,
plus 1 mm-spaced slots
on the end. Overall size:
75 x 115 mm. $16.95
#89345 Incra Tiny “T” #89344
Rule, Imperial. Features
marking holes at every 16th, 32nd and 64th from 0 to 3 inches, plus
L. Digital Readout Kits for metalworking and woodworking machines include a remote digital display that vertical 32nd-spaced slots on the end. Overall size: 3” x 4.5”. $16.95
can be positioned up to 6 feet away for easy viewing. Readings are displayed in .0005”, 1/128”, and .01 mm Precision “T” Rules are also available in larger sizes:
increments. Resettable to zero at any position. Includes USB data port, AC adapter power port, mounting
hardware and batteries. Available in 3 different lengths. #81566 6-Inch Precision #81570 12-Inch Precision
“T” Rule, Imperial $25.95 “T” Rule, Imperial $44.95
Aluminum Beam #86713 6” capacity $37.95 #86714 12” capacity $44.95 #86715 24” capacity $52.95
Heavy Duty Stainless Steel Beam #86711 6” capacity $64.95 #86712 12” capacity $99.95 #50299
Accessories for all Readout Kits #86717 USB Interface and Cable (see website for details) $97.95 #86718 AC Adapter $13.95
#10105
M. #82556 6” Digital Caliper displays in easy-to-see S. #60299 Angle Setter/Protractor is perfectly sized
LCD numerals. Measures insides, outsides, depths for miniature construction projects. Beautifully made #50299 Tungsten Carbide Scriber Next to diamond, tungsten carbide
and steps with a resolution of .0005” or .01 mm. “Zero” of stainless steel with engraved and blackened hair- is considered to be the hardest material known. Has a finely honed
button lets you take “2-step” measurements without line markings. Doubles as an 8” ruler when extended. needle sharp point mounted in a 5-1/2” long steel handle. Will scribe
calculations; instantly converts inches to mm and 5” long when folded. $19.95 plastics for snap cutting. $10.95
back. Made of hardened stainless steel. Includes T. #85936 Miniature Double Square All six sides of #10105 Genuine Diamond Tip Scriber does everything our Carbide
battery, instructions and foam-lined case. $39.95 the tool steel head block are ground accurate, square, Scriber will do and more. Even marks hardened steel and glass. For
N. #83762 Fractional Digital Caliper includes all and true. Thumb nut holds 4” scale in secure position those who want the best. Includes ergonomically contoured plastic
the features of the above Digital Caliper, plus direct end-to-end. Head block is 1/2” thick x 1” wide x 2-3/8” handle and protective cap. 5-1/4” long. $19.95
reading in fractional inches. Resolution in fraction long. $14.95
mode is 1/64”. $44.95 U. #85934 Marking Knife Razor-edged, double-
P. #84735 Digital Thickness Gauge Push jaws into beveled tool steel blade produces a very accurate line Pounce Wheels,
contact with object surface to quickly and accurately for making precise cuts. Hardwood handle has a
measure thickness. Press a button to display decimal comfortable smooth finish; flattened sides prevent Explained
inches, fractional inches or millimeters on large LCD. roll-away. 7” long. $21.95
Measuring range 1”. Readability: .001”, 1/64”, 0.01 mm. V. Stainless Steel Machinist’s Rules provide the Transferring Drawings from Paper to Wood
Includes on/off switch, hold button to retain last accuracy and readability you need and they will last Just roll the pounce wheel over the drawing and it
reading, and battery. $42.95 a lifetime. Both have engraved and blackened mark- perforates tiny holes in the paper. Place the paper
Q. Center Squares are used to find and mark the exact ings. Choose 6” all-inch rule or 12” inch/metric rule. over the wood. Then rub powdered chalk (the kind
center of round, square and octagonal parts without #84174 6” Rule with 8ths, 16ths, 32nds & 64ths $5.95 used for snap lines; available at any hardware store)
calculations. Just insert the item into the “V” of the #10115 12” Rule with 8ths, 16ths, 32nds, 64ths, mm over the perforated holes. The chalk goes through
square and mark a line. Then, rotate the piece 90° and & cm $10.95 the holes and marks the wood.
mark again. Made of precision ground steel. Simulating Rivets on Models
W. #86744 Right-Read Tape Measure allows righties
#82285 Center Square for stock up to 2-1/2” $14.95 to roll out the tape easily with the left hand, and make Works on wood, plastic and sheet brass up to .010”
#83280 Center Square for stock up to 5” $29.95 the mark accurately with the right hand because thick. Aluminum handles with steel wheels. Tighten
R. #50278 Stainless Steel Protractor beautifully the markings are RIGHT SIDE UP. 16’ long, graduated chuck for straight lines or loosen for curves.
made, with engraved and blackened calibrations. in inches and cm. Includes belt clip and lock switch. Set of three; .250” dia. x .041” spacing, .300” dia. x .051” spacing and
3-3/8” x 2” plate, 8” blade. $24.95 List $15.95 . . . Our Price $11.95 .412” dia. x .072” spacing. #15200 Pounce Wheel Set $29.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 65
 NEW ITEMS SUPPLIES
Give Your Models a Superior Finish
with Premium Quality Acrylic Paint Sets
from Acrylicos Vallejo
Model Color Brush-on Paints These water-based acrylics
were developed specifically for brush application, and provide
uniform coverage even on difficult-to-cover surfaces, such as
metal and plastic. Model Color dries to a durable, waterproof
matte finish with little trace of brush strokes.
Model Air Paints for Airbrush Application These water-based
acrylics are formulated especially for airbrushing straight from
the bottle…no thinning or special mixing is required. Made
with finely-ground pigments and airbrush-perfect viscosity,
Model Air goes on smoothly and covers well, even with just a
thin coat. Tiny surface details won’t be obliterated, and the
resulting matte finish is durable and waterproof.
Model Color and Model Air paints are non-toxic, odor-free, and
clean up easily with water. Paints are provided in convenient #29042 #29036
17 ml (approx. half-ounce) squeeze bottles with removable
dropper-style tips that allow brush dipping or drop-by-drop Model Air & Model Color 72-Color Paint Sets List $300.00 each . . . Our Price $219.95 each
dispensing. 72-color sets include 3 Toray paint brushes and handy storage/carrying case.
See our website for a complete listing of colors #29042 Model Air #87830 Model Color #87369 Model Color #29036 Model Color
included in each set. Basic Colors Paint Set Military Colors Paint Set Game Basic Colors Paint Set Basic Colors Paint Set

#29065 Model Color Flesh & Skin Tone Model Color 16-Color Paint Sets Model Air 16-Color Paint Sets
16-Color Paint Set List $53.00 ea. . . Our Price $42.95 ea. List $53.00 ea. . . Our Price $42.95 ea.
List $53.00 . . . Our Price $42.95 #29032 Allied Forces #29063 German Colors WWII Europe &
#29033 American Civil War Africa
#29034 Basic Colors, U.S.A. #29037 Basic Colors
#29031 Acrylicos Vallejo Surface Primer
#29035 Naval Colors, Steam Era #29038 Metallic Colors is an exceptional quality water-based
#29039 Weathering Colors acrylic-polyurethane coating that you
#29040 U.S. Air Force, WWII apply with an airbrush or paint brush to
any material. Its quick-drying light-gray
formula provides a silky smooth, uniform
base for your finish coat. Made with the
finest ground pigments so even the small-
est details stand out. 200 ml / 6.76 fl. oz
bottle. $17.95
Model Air 8-Color Paint Sets
List $30.00 ea. . . Our Price $24.95 ea. NEW! #89951 Acrylicos Vallejo Gloss
Black Surface Primer Same formulation
#29062 Model Air German Colors as above, but with black pigment. Makes
1940 – 1945 a perfect foundation for dark paint jobs.
#29061 Model Air German Colors #29071 Model Air Navy Color Series 200 ml / 6.76 fl. oz bottle. $17.95
1927 – 1941 Metal Color 4-Color Airbrush Paint Sets Kriegsmarine WWII German Colors
#29074 Jet Exhaust $34.95 8-color paint set $29.95 #87199 Acrylicos Vallejo Airbrush Thin-
#29041 Model Air “Bluelight” ner Use this specially formulated thinner
Emergency Vehicle 8-Color Paint Set #29073 Engine $34.95 #29069 Model Air Navy Color Series to reduce and extend your Acrylicos
List $26.95 . . . Our Price $21.95 #29075 Aluminum Dope $34.95 Nuclear Submarine 8-color paint set $27.95 Vallejo paints, increase fluidity and delay
drying time when spraying. 200 ml bottle.
#29097 Model Air “Air War” Color Series Post WWII
$14.95
to Present “Aggressor” Squadron (Part II) 8-color
paint set. List $29.95 . . . Our Price $21.95 #87200 Acrylicos Vallejo Airbrush Flow
Improver Use for optimal paint flow and
#29099 Model Air “Air War” Color Series USAF to delay the drying of paint on the air-
Gray Schemes from 70’s to Present 8-color paint set. brush needle while airbrushing. 200 ml
List $29.95 . . . Our Price $21.95 bottle. $14.95
Paint and brushes
Interlocking Modular Paint Racks assemble easily without tools. Buy 1, 2 or
more and customize to fit your workspace. Made of laser-cut hardboard not included
with white finish on one side and natural finish on the other. Holes are
1” dia. for 1/2 oz (17 ml) bottles; 1-7/16” dia. for 1.18 oz (35 ml) or
2 oz (60 ml) bottles; 2-1/8” diameter for 6-3/4 oz (200 ml) bottles.
Designed for MicroLux® and Acrylicos Vallejo paints,
but may used with any other brand of model paint jars.
#29098 Model Color Russian, Italian and
$19.95 each
Japanese Tank Crew Uniform 8-color
paint set includes 8 special colors #86594 Front Module holds fifty-two 1/2 oz bottles, eight 1 or
developed for simulating wear on tanks, 2 oz bottles, plus 22 brushes. 13-3/8” wide x 8-7/8” deep x 4-1/4” high.
tires, tarpaulins, etc., and for crew #86595 Corner Module holds twenty-eight 1/2 oz bottles, sixteen
uniforms, skin tones and camouflage. 1 or 2 oz bottles, one 6-3/4 oz bottle, plus 26 brushes. 11” wide x
List $29.95 . . . Our Price $21.95 11” deep x 4-1/4” high.

66 • ORDER TOLL FREE 1-800-225-1066 • OUTSIDE USA CALL 1-908-464-2984

 Follow us on SUPPLIES
#89418 Acrylicos
Paint Sets from the Color Masters at Acrylicos Vallejo Vallejo Game Colors
Model Air
Paint Set
Each color
has been
meticulously
developed in
collaboration
with model
painters who
specialize in
#89424 Acrylicos Vallejo Figure Color #89429 Acrylicos Vallejo Effects Color fantasy figures
Series Face Painting Set, 1/2 fl. oz. bottles, Series Old & New Wood Effects Paint Set, and dioramas. Set includes 51 colors, 8 surface
8 colors. $23.95 1/2 fl. oz. bottles, 8 colors. $23.95 primers and 5 auxiliary products and color chart. $169.95

Fine Textures for

Model Scenery and
Brickwork Mortar
Formulated with permanent
pigments, microparticles and
acrylic resins. Apply with brush,
spatula, putty knife or rag. Dries to a hard, durable finish. Use for driveways, foundations,
simulated stucco, pathways, mud patches, ditches, etc. Water clean-up. Set includes one
#89423 Acrylicos Vallejo Effects Color #89427 Acrylicos Vallejo Effects Color 200 ml (6-3/4 oz) jar each of Gray Pumice, Dark Earth and Brown Earth texture paints,
Series Rust, Stain & Streaking Paint Set, Series Rust & Chipping Effects Paint Set, plus one 200 ml jar of Sandy (Mortar) Paste which is used to simulate mortar lines on
8 colors. $23.95 1/2 fl. oz. bottles, 8 colors. $23.95 brick buildings…just wipe on/wipe off. #86532 Texture Paint Set $44.95

#89425 Acrylicos Vallejo Effects Color #29070 Acrylicos Vallejo Effects Color #29066 Acrylicos Vallejo Wargames Color #89433 Acrylicos Vallejo afv Color Series
Series Wood & Leather Paint Set, Series Ruins & Rubble Paint Set, 1/2 fl. oz. Series British Infantry Napoleonic Wars Wheels & Tracks Paint Set, 1/2 fl. oz.
1/2 fl. oz. bottles, 8 colors. $23.95 bottles, 8 colors. $24.95 Paint Set, 8 colors. $27.95 bottles, 6 colors. $16.95

#89428 Acrylicos Vallejo Air War Color #89426 Acrylicos Vallejo Fantasy-Pro #29068 Acrylicos Vallejo Sci-Fi Color #89409 The Shifters Galaxy Dust $24.95
Series Luftwaffe Colors 1941 To End-War Malefic Flesh Acrylic Color Paint Set, Series Star Fighters Colors Paint Set, #89410 The Shifters Space Dust $24.95
Paint Set, 8 colors. $23.95 1/2 fl. oz. bottles, 8 colors. $23.95 1/2 fl. oz. bottles, 8 colors. $24.95 #89411 The Shifters Magic Dust $24.95

#89420 Acrylicos Vallejo Model Color #89421 Acrylicos Vallejo Model Air #89419 Acrylicos Vallejo Game Color #29072 Model Color Napoleonic Colors
Medieval Colors Paint Set, 1/2 fl. oz. Building Colors Paint Set, 1/2 fl. oz. Introduction Paint Set, 1/2 fl. oz. bottles, Paint Set, French & British, 1789 – 1815,
bottles, 16 colors. $42.95 bottles, 16 colors. $42.95 16 colors. $42.95 1/2 fl. oz. bottles, 16 colors. $44.95

#89432 Acrylicos Vallejo Model Color #89430 Acrylicos Vallejo Model Color #89431 Acrylicos Vallejo Game Inks #89422 Acrylicos Vallejo Game Color
Metallic Colors Paint Set, 1/2 fl. oz. Face & Skin Tones Paint Set, 1/2 fl. oz. Acrylic Colors for Fantasy Figures Set, Wash Set, 1/2 fl. oz. bottles, 8 colors.
bottles, 8 colors. $23.95 bottles, 8 colors. $23.95 1/2 fl. oz. bottles, 8 colors. $23.95 $23.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 67
 HAND TOOLS SUPPLIES MODEL TRAINS
Acrylicos Vallejo “MODEL AIR” Railroad Colors 20-Color Paint Set #90120 Doc O’Brien’s Weathering Powders Rack
Designed in-house and manufactured in our
Get 2 of each color below – 40 bottles in all – for one great package price!
own U.S. factory, this beautifully-designed
#88667 Model Air 20 Railroad Colors Paint Set. Value $159.00 Super Buy $139.95
laser-cut wood rack holds and organizes a
Acrylicos Vallejo “MODEL AIR” Railroad Colors,1 oz each (two 1/2 oz bottles) $6.95 complete set of 12 Doc O’Brien’s Weathering
Powder jars, or any other container up to
Like our MicroLux® Paint line, these exceptional quality Acrylicos Vallejo flat-finish, water-based
1-1/8” in diameter. 3 additional holes are
acrylic paints have been custom formulated and color matched to PollyScale paints and
provided for your favorite brushes. Special
labeled with PollyScale color names for easy cross-reference. All the same great features as our
Powders and middle shelf keeps jars from tipping. 9-3/4” long x
MicroLux® Paints apply as well, except these paints are provided in 1/2 oz bottles and price is
brushes are not included. 4-1/4” deep; 2-7/8” high. Assembly required. $17.95
for one ounce total of each color, and, there are 20 different colors from which to choose.
#29011X2 #29016X2 #29021X2 #29026X2 Realistically Weather Model Locomotives with this Custom Set
Concrete Aged White Signal Green Flat Aluminum
Before
#29012X2 #29017X2 #29022X2 #29027X2 #85836 Locomotive Weathering Paint Set
Steam Power Black Dark Green Tarnished Black Depot Buff Includes 8 experts-choice water-based
#29013X2 #29018X2 #29023X2 #29028X2 acrylic paint colors: dark earth, rust, gray,
Undercoat Lt. Gray Clear Satin Earth Reefer Yellow mud brown, ivory sand, U.S. sand, and dark
#29014X2 #29019X2 #29024X2 #29029X2 gray airbrush colors, plus brush-applied
Clear Gloss Caboose Red Reefer Gray Steel Blue gloss black for oil spills/stains. 17 ml (1/2 oz)
#29015X2 #29020X2 #29025X2 #29030X2 dropper-top bottles. $29.95
Box Car Red Signal Red Dirt Light Sea Blue After

The Best Way to Store Acrylicos Vallejo Paints

Organize, store and even transport your Acrylicos Vallejo
paints in the best way possible with this custom-
fitted foam-lined case. Designed specifically
for AV 1/2 oz paints, case holds up to 80 bottles
and includes an additional space for paint brushes.
Hunterline
Made of tough plastic with translucent lid and sturdy Weathering Mix
latches. #88668 Acrylicos Vallejo 80-bottle Paint Case $59.95 Use Hunterline
Weathering Mix to create
the most realistic finishes
MicroLux® Superior Quality Flat Finish Acrylic and effects on wood
Hobby Paint in Popular Railroad Modeling Colors models, plastic, paper,
• Blended by expert acrylic paint formulators Acrylicos Vallejo to cardboard, hydrocal
Micro-Mark specifications • Color matched to PollyScale paint and more. These alcohol-
samples; labeled with PollyScale color names for easy cross-reference based stains dry quickly,
• Water-based for safety and easy clean-up • Use airbrush formula preventing warp when
on any surface straight from the bottle – no thinning necessary; used on wood. Creating
brush-on formula provides superior coverage without showing infinite color variations is
brush strokes, even over large areas • Finely-ground pigments for as easy as diluting the
smooth application and superior coverage with a thin coat • State- mix with common 70% isopropyl alcohol. Colors may also be “layered” for an even wider range
of-the-art acrylic resin for durable finish • Economy-size 2 oz plastic of effects. Soap and water cleanup. Choose from 4 colors below. 8 oz bottle. $17.95 ea.
squeeze bottle for easy dispensing • Practically no odor • Top 10 #89367 Hunterline Barn Red Weathering Mix
colors for AIRBRUSH and BRUSH-ON application. These items
#89368 Hunterline Dark Brown Weathering Mix ship by ground to
#29001 #29003 #29005 #29007 #29009 #89369 Hunterline Raw Siena Weathering Mix 48 contiguous
AIRBRUSH Rail Brown RR Tie Brown Rust Aged Concrete Roof Brown
United States only
#89370 Hunterline Shale Weathering Mix
Colors, 2 oz #29002 #29004 #29006 #29008 #29010
$7.95 each Grimy Black Reefer White Clear Flat Engine Black Roof Red Rust Away without the Guesswork
Model Wash is a pre-thinned acrylic paint that creates rust effects
MicroLux® Railroad Colors 10-Color AIRBRUSH Paint Set (oxidation) on model surfaces. Just brush on and let dry.
Get 1 of each color above – 10 bottles in all – for one great package price! #85841X2 Model Wash – Dark Rust 2 bottles
#88645 MicroLux® 10 Railroad Colors Airbrush Paint Set. Value $79.95 Super Buy $74.95 (70 ml / 2.36 fl. oz total) $11.95

#29051 #29053 #29055 #29057 #29059 Achieve great rust

BRUSH-ON Rail Brown RR Tie Brown Rust Aged Concrete Roof Brown effects quickly
Colors, 2 oz and easily!
#29052 #29054 #29056 #29058 #29060
$7.95 each Grimy Black Reefer White Clear Flat Engine Black Roof Red

MicroLux® Railroad Colors 10-Color BRUSH-ON Paint Set

Age-It EASY Ready-to-use solvent-based formula
Get 1 of each color above – 10 bottles in all – for one great package price!
penetrates deep into wood, creating the look of
#88644 MicroLux® 10 Railroad Colors Brush-On Paint Set. Value $79.95 Super Buy $74.95
weather-beaten timber almost instantly. Age-It EASY
does not warp wood like water-based solutions.
The Best Way to Store MicroLux® Paints Sold in sets of three 3-1/2 oz bottles. $26.95/set of 3
Designed in-house and manufactured in our #80873X3 Age-It EASY Gray Age-It Easy ships by ground
own U.S. factory, this elegant wood rack holds
#81528X3 Age-It EASY Brown to 48 contiguous U.S. only.
up to 10 MicroLux® paint bottles, or any other
container up to 1-3/8” diameter. 9-3/4” long x Board-By-Board
4-1/4” deep; 2-7/8” high. Assembly required. Decking/Siding
#88700 MicroLux® Wood Paint Rack $17.95 features individual planks
of wood bonded together
#81742 Mixing Palettes side-by-side with black glue in
Economical 3” diameter palettes sheets 3” wide x 22” long x .050”
for mixing paint, epoxy, weathering thick. To give the wood a realistic
washes and stains; holding small parts during weather-beaten look as shown in
A B C D
model assembly or repair; small parts cleaning. the photo, stain with Age-It EASY.
3” diameter polyethylene with a lip for wiping off A. #60857 1/16” B. #60858 3/32” C. #60859 1/8” D. #60860 3/16”
excess paint from brushes. 40 per package. $10.95 Plank Width $18.95 Plank Width $15.95 Plank Width $15.95 Plank Width $15.95

68 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 Follow us on SUPPLIES HAND TOOLS POWER TOOLS NEW ITEMS

Doc O’Brien’s Weathering Powders Rust n Dust TM Makes

Anything Look Old and
Rusty in Four Easy Steps

#90224 Acrylicos Vallejo

Mecha Colors Model Air Paint Set
Mecha Color is a range of acrylic airbrush colors which
have been designed specifically for painting robots,
Gundam, Gunplas and Transformer figures. Set includes
Doc O’Brien’s weathering powders let you create an aged, well- It’s easy to create a random, natural, rusty 80 colors, glosses, mattes, washes and other finishing
worn appearance on scale vehicles, military models, structures, metal appearance on just about anything… products, plus color chart and custom case. $219.95
trains, aircraft and even figures. Ultra-fine self-adhesive powders wood, metal, plastic, paper and more! Just Mecha Finishing Varnishes for Maximum Durability
are dusted on to simulate the effects of time and the elements... apply Rust n Dust water soluble liquid and #90282 Mecha Gloss Varnish, 17 ml $8.95 Ready to
no overcoat required! They’re also used as weathering washes powder components in four easy steps. airbrush
#90283 Mecha Matte Varnish, 17 ml $8.95 right from
when mixed with water. Kit contains enough material to weather Applications dry in under 1 hour. Includes
dozens of models. Instructions included. Non-toxic. set of four 2 oz bottles: (1) Rust Wash, #90284 Mecha Satin Varnish, 17 ml $8.95 the bottle!
12 color set includes Dirty Brown, Mildew Green, Grimy Black, (2) Black Wash, (3) Clear Flat and (4) Dust
Gritty Yellow, Rusty Red, Faded Blue, Rusty Brown, Grungy Gray, Powder. Rust n Dust is non-toxic and Tamiya
Patina Green, Desert Sand, Highlight White and Muddy Red. non-corrosive. Ships by ground to 48 contiguous U.S. only.
#81632 Doc O’Brien’s Weathering Powders $29.95 #84625 Rust n Dust $19.95
Spray-Work HG
Wide Airbrush
Special Brush Set Applies Weathering Model Pigment Sets for Built to afford you
extended usage
Powders to Perfection Special Effects Weathering without tiring your
This 6-piece set of specialty finger. The trigger-
brushes includes goat and type airbrush is double action;
pony hair bristles in the texture, initial spray emits mostly air to
stiffness and contour needed enable fine adjustment of the paint spray
for perfect weathering powder volume. This high-grade metal airbrush features
application. The brush tips pick a large 15 cc paint cup and a 0.5 mm wide nozzle
up just the right amount of designed for spraying large areas, achieving glossy finishes
powder and distribute it just and/or spraying paints with heavy pigment, such as surface primers
where you want it. Then, use the and metallic colors. Works with air can or can be connected to
large brush to blend powders a compressor by removing the air valve. A needle stopper allows
right on the model for maximum Use a soft brush to apply these finely- adjustment of the spray width.
realism. Use the foam applicator ground powders to weather and age #89597 Tamiya Spray-Work
for spot application of washes that vehicles, fortifications, structures and armor. HG Wide Airbrush $301.95
simulate the effects of rain water. Works on all model building materials.
Packed in a snap-shut soft nylon Bind in place with Micro-Mark Scenic
case which both protects the #89598 Tamiya Spray-Work
Cement (#85043) or clear flat spray. Each
brushes and prevents powder Airbrush Stand II consists of a
set contains four colors; each color in a
residue from soiling other tools. tray-type base with ample room for
30 ml (1 oz) wide-mouth jar.
storage and two airbrush
#85197 Brush Set for Weathering Powders $24.95 #85838 Mud and Sand Set includes light hangers which hold two
yellow ochre, brown iron oxide, natural airbrushes at the same
umber, and light slate gray. $14.95 time. Stand is compatible
Professional-Quality #87337 Mud And Puddles Set includes with most Tamiya and many
still water, transparent water, European other airbrushes. Includes
Weathering thick mud, and black thick mud. $19.95 pipette; airbrushes and
Brush Set #85840 Snow, Soot, Ashes Set includes bottles not included. $27.95
titanium white, green earth, light slate
gray, and natural iron oxide. $14.95 These Brushes Help You Master Dry Brushing
#87468 Rust and Corrosion Set includes
brown iron oxide, old rust, rust, and new E
rust. $14.95 F
#88066 Dust and Dirt Set includes light
desert dust, yellow ochre, burnt umber, G
and natural iron oxide. $14.95
H
We recommend…#85197 Brush Set for
Weathering Pigments/Powders. $24.95 E. #81081 #2 Dry Brush $6.95
10 different natural- and synthetic-bristle weathering brushes for
the widest variety of effects, techniques, materials and surfaces. F. #81080 #4 Dry Brush $7.95
4 smaller brushes feature 3 rounded shapes and 1 angled shape G. #81079 #6 Dry Brush $8.95
for getting into tight spots and for applying weathering materials #83760X3 Railroad Tie
H. #81078 #8 Dry Brush $10.95
just where you want them. 4 larger rounded brushes are ideal and Bridge Stain
for creating the blending effects that give your models the most simulates the look of #81082 Set of 4 SAVE! $32.95
realistic overall appearance. 2 specialty brushes provide a conical weathered creosote- Dry brushing is a technique that lightens raised details on models
stiff bristle for creating stippling and spatters, and a stiff/soft treated timber. Apply by and miniature figures; for example, rivets, tank treads and buttons
“comb” type brush for creating additional effects. Set includes a brush or by dipping. on a coat. By wiping almost all of the paint from a specially shaped
handsome leatherette case with convenient magnetic closure. Sold in a set of three brush, just a touch of color is needed to create subtle highlights for
Case not only stores and protects the brushes from damage; the 3-1/2 oz bottles. a realistic, artistic appearance. Our special brushes are made of the
fold-down top panel prevents residual weathering powders from $26.95/set of 3 finest Mongolian sable and have the perfect texture and shape for
soiling other tools. Ships by ground to 48 contiguous mastering dry brushing techniques. Brushes are approx. 7” long
#86009 10-piece Professional Pastel Brush Set with Case $44.95 United States only. with lacquered hardwood handles and seamless nickel ferrules.

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 69
 Our Unique, Self-Contained, Portable Airbrush System is Now Available in a Broad-Spray Version!
One of the most innovative tools we've seen in years, this go-anywhere Self-Contained Portable Airbrush is a marvel of technology and
engineering. An onboard, rechargeable lithium-ion battery activates the built-in air compressor, filling its integral tank with a supply of
pressurized air that will power the airbrush for about 40 minutes of work time on a full 1 to 1.5 hour charge. Delivering a maximum of
25 psi at 7L/min., and weighing just 12 ounces, this dual-action airbrush has surprisingly good balance, feel and ergonomics, fitting very
NEW! #90221
nicely in the hand. Equipped with a 0.3 mm nozzle, this high-quality airbrush has all the adjustability and features found in high-end
Black & Chrome conventional airbrushes and is designed primarily for fine detail work and moderate coverage with relatively thin paints, stains,
BROAD-SPRAY inks, dyes and washes. From detailing the flame paint job on your 1:1 hotrod in the driveway, to weathering a model locomotive
Airbrush on your railroad layout, to painting temporary tattoos at the county fair, this versatile tool is a must-have for virtually every
airbrush user. Set includes fully assembled, dual-action red anodized and polished chrome airbrush body, red anodized
compressor/tank with auto start/stop and built-in battery, three top-mounted paint cups with lids: chrome 7 cc, plastic
20 cc and 40 cc with graduations, pipette, 3’ USB charger cable, air hose adapter (to use the airbrush with a conventional
air compressor and/or inline moisture trap), inline moisture trap adapter, and fitted hardshell case with magnetic closure.
#89747 Micro-Mark Self-Contained Portable Detail Airbrush Set (Red & Chrome) $99.95
NEW! #90221 Micro-Mark Self-Contained Portable Broad-Spray Airbrush Set (Black & Chrome) is identical to the airbrush
above, except the 0.5 mm nozzle produces a wider spray pattern, ideal for larger projects with greater coverage. $99.95

#89671 MicroMini Compact Air Compressor Perfect for use when your
Portable Airbrush is charging, or when power is available and you don’t want
#89747 to haul your noisy, clunky, heavy air compressor around, or when space is an
Red & issue and you just don’t have room for a full-size compressor, or when you’re
Chrome tired of burning through canned air but aren’t ready to step up to a bigger
DETAIL unit just yet, or when you just want a really cool, tiny compressor you can take
Airbrush anywhere, our super-quiet and efficient MicroMini Compact Air Compressor
gets the job done like no other. Weighing in at a mere 19 ounces and only
4-1/4” x 4-1/4” x 2” tall, this palm-size performer consistently delivers 25 psi
at 10L/min., providing all the airflow you need for airbrushing. Its small size
and ample output make it ideal for airbrushing anywhere there’s a power
source. Includes high-quality, braided cloth-covered, 6-foot hose with metal
1/8” BSP female fittings, top-mounted airbrush holder, on/off button with LED
indicator, non-slip rubber feet, and power supply with 3-foot cord. $49.95

#82427 Fold-Up
Spray
Booth is
Use ducted Ideal for
or ductless! * Small
Work
Spaces,
Travel
and
More!
#82430

MicroLux® spray booths eliminate the hazards of spraying paint in confined areas. Inside the base of the
downdraft-style booth is a powerful, brushless exhaust fan which draws paint overspray from inside the
durable metal hood and passes it through a three-stage filter which removes pigment particles and solvent
vapors, then vents the cleaned air outside the work area. The clear window which forms the top of the hood
lets room light in. Includes 4” diameter exhaust ports, on/off switch for fan, holes for hanging up parts, and
filters. All metal construction. Hood requires a few minutes of assembly. 120VAC. *With water-based paint.
#82427 STANDARD 15” x 20” Spray Booth #82430 LARGE 15” x 30” Spray Booth Portable, fold-up design Use 2 booths
Interior dimensions are 15” deep x 20” long x 12” high. Interior dimensions are 15” deep x 30” long x 12” high. goes anywhere you do! side-by-side to paint long models
Single 185 cfm fan directs air flow out the back of the Dual 185 cfm fans (370 total cfm) direct air flow out
base. Overall height: 21”. dual exhaust ports located on side of the base Light-weight (only 7 lbs.) for complete portability, this booth
#82427 Standard 15” x 20” Spray Booth $549.95** (left/right reversible). Overall height: 22”. measures just 16” wide x 8” high x 6” deep when folded for easy
#82427 Large 15” x 30” Spray Booth $799.95** storage inside a cabinet or on a shelf. Unfolds in seconds into a
STANDARD Spray Booth Filters and Accessories large 16” wide x 13” high x 15” deep booth. If you need to spray
#82150 1st stage filters (15” x 20”) pkg. of 5 $5.95 LARGE Spray Booth Filters and Accessories long items, just place two booths side-by-side to double the
#82433 1st stage filters (15” x 30”) pkg. of 5 $9.95 width! Power-packed sparkless DC fan motor has 1/3 more air flow
#82410 2nd/3rd stage filter set (15” x 20”) $14.95
#82434 2nd/3rd stage filter set (15” x 30”) $21.95 than regular AC models. Includes filter for trapping overspray,
#82429 1st stage filter roll (20” x 1,800”; #82432 1st stage filter roll (30” x 1,800”; turntable, and wall power pack. (Plugs into 110VAC wall outlet.)
makes 120 filters) $54.95 makes 120 filters) $89.95 Add a duct (order below) to exhaust fumes outdoors. Made of
#82428 Roll filter tray (20”) $50.95 #82431 Roll filter tray (30”) $64.95 durable plastic polymers, with metal fan grill and rubber feet.
#86104 Fold-Up Spray Booth
#83368 Tamiya
List $199.95 . . . Our Price $129.95 2 or more $99.95 ea.
Spray-Work Painting
Stand Set The smooth- #86105 Spray Booth Exhaust Duct
gliding bases of these with Window Vent
fully rotating paint FITS ALL SPRAY BOOTHS
stands provide precise ON THIS PAGE
finger-tip control while $24.95
airbrushing, even within 2 or more $22.95 ea.
the confined area of your
spray booth. Set of 2 #86106 Replacement air filters for spray booth, pkg. of 5 $22.95
turntables (4-1/2” and #87898 Fold-Up Spray Booth Super Value Package
6-1/2” dia. x 4-1/2” tall) includes 2 EACH spray booths and exhaust ducts,
includes adjustable spring clips and molded-in features that hold parts singly or while attached to sprue. $39.95 plus 10 filters. Value $293.80 Super Buy $269.45**
Micro-Mark Tip: Our MicroBRYTETM USB rechargeable lighting system is a perfect fit for all of our spray booths, providing bright, color-adjustable lighting right inside the
booth. Plus, all the mounting hardware you need for removable or permanent installation is provided. Upgrade your spray booth now with MicroBRYTETM! #89861 $29.95

70 • ORDER TOLL FREE 1-800-225-1066 **Use our website shopping cart to calculate freight charge or shipments outside 48 contiguous U.S., or call our order line for assistance.
 Airbrushes and Airbrushing Equipment This is only a sampling of our wide selection – see our complete line at www.micromark.com

A B C D
A. #86116 MicroLux® Pistol-Grip Airbrush Set has a professional feel for projects of all C. #84299 Paasche Talon Airbrush Set Engineers configured the trigger, piston and air
types and sizes. Trigger action controls air flow; adjustable needle controls spray pattern. valve of the Talon to allow a smoother stroke, increase durability and ease of assembly.
Gravity-feed, internal-mix gun works with most paints, stains and washes. Set includes Talon is perfect for precision control of detail in patterns up to 1-1/2” wide. Set includes
airbrush; 3 paint cups: 2 cc, 5 cc with lid, and 13 cc with lid; 2 extra tip assemblies; 3 Talon airbrush, 6’ braided air hose with couplings (style may vary), hang-up hook, “22 Air-
needles (0.3, 0.5, and 0.8 mm); wrench, 6’ long braided hose; fitted case; and instructions. brush Lessons” booklet, parts list and 3 wrenches. List $147.00 . . . Our Price $129.95
List $99.95 . . . Our Price $79.95 D. #81018 Paasche H Series Single-Action Airbrush Set A great external-mix airbrush
B. #86110 MicroLux® Double-Action Airbrush Set Internal-mix airbrush features a for beginners and experienced users alike, suitable for everything from fine detail
down-and-back trigger that controls both air flow and paint flow. Converts to single-action painting to smooth, solid color coverage. Set includes Paasche H Series airbrush; three
simply by turning a set screw. Set includes airbrush, two 22 cc (3/4 oz) glass jars, metal jar tips for light, medium and heavy liquids; 1/4 oz metal paint cup; 1 oz plastic paint jar
adapter with pickup tube, one metal color cup, 5’ vinyl air hose, hang-up hook, nozzle/hose with metal pick up tube; 1 oz plastic storage jar; 6’ long braided air hose with 1/4” NPT
wrench, protective metal nozzle cap, and fitted storage case. $39.95 female fitting, hang-up hook and helpful instructional booklet. Made in the USA. $89.95

E F G H
1/8” 1/8” M5x0.5
1/8”

1/4” N 1/4” P 1/4” Q 7-1/2” R

J K L 1/8” M H. #86539 Whisper Air Compressor Weighing in at just under 9 lbs., this sleek, easily-
transported and affordable compressor performs well and looks great doing it. Use the
compressor in auto start/stop mode and it runs only when you press the trigger on your
E. #86108 Portable Air Compressor Compact in size and weighing just under 8 lbs., this
airbrush. Or, use the built-in pressure gauge to dial-in the optimal pressure you need
smooth-running, nicely-built air compressor goes where you need it. Auto start/stop
(anywhere from 5 to 57 psi) for spraying your choice of media with a continuous, controlled
means it only runs when you press the trigger on your airbrush, and oil-less, maintenance-
flow. Either way, its oil-less, maintenance-free, piston-type construction provides smooth
free, piston-type construction provides smooth operation with low noise. Includes carry
operation with very low noise, and its internal tank with water drain valve provides dry,
handle, sound-deadening suction cup feet and 1/8” BPS adaptor. Overall size: 10” x
pulse-free air flow. Motor: 1/6 hp., 120VAC with 5’ cord; body-mounted master on/off
5-5/16” x 6-11/16”. Air output: 0.7 to 0.8 cfm. Delivers 20 – 30 psi. List $109.95 $79.95
switch. Includes 2 airbrush holders, convenient carry handle and sound-deadening feet.
F. #86113 MicroLux® Compressor-mounted Pressure Regulator/Gauge/Moisture Trap Overall size: 5-1/2” wide x 10” deep x 8” high. Air output: up to 0.81 cfm. Delivers up to
lets you control the air pressure you need for the type and consistency of paint being 57 psi. MicroLux® brand. List $169.95 . . . Our Price $129.95
sprayed. Regulates airflow from 0 to 150 psi (0 to 10 bar). Built-in moisture trap removes
J. #86114 Mini Filter attaches directly to your airbrush* to remove moisture, oil and dust.
finish-ruining condensation…even on humid days. Fits most hobby/art air compressors
Includes clear filter bowl and spring-loaded drain valve. 1/8” BSP fittings: male on one
with standard 1/4” NPT male outlet fitting. Includes 1/4” fitting. $29.95
end; female on the other. $12.95 2 or more $9.95 ea. *1/8” BSP male fitting required
G. #86109 MicroLux® Twin-Cylinder Portable Air Compressor Built with special care
K. #86115 Air Hose Durable, highly-flexible cloth-braided air hose with 1/8” BSP female
for the demanding hobbyist-artist, this sturdy, case-mounted air compressor is equipped
fitting on one end and 1/4” BSP female fitting on the other (fits typical 1/4” NPT
with features desired by professional airbrush users: 1/4 hp motor-driven twin-cylinder
compressor output fitting). 3 meters (approx. 10’) long. $13.95 2 or more $10.50 ea.
compressor for powerful delivery; 3.5 liter air tank to eliminate pulses that cause paint
application problems and reduce compressor cycling; Auto-start/stop switch for L. #86117 Glass Paint Jars Set of ten 22 cc (3/4 fl-oz) glass jars with plastic caps. 30/400
continuous replenishment of air tank; Adjustable regulator and pressure gauge for threaded caps are compatible with MicroLux® brand airbrushes. Foam seals inside caps
spraying various types of paint; Moisture trap and oil-less piston design eliminates paint help keep paint fresh between projects. $19.95 2 or more sets $14.95/set
contamination; Sound-deadening, ventilated metal enclosure for quiet operation and M. #86119 Pressure Reducing Valve 1/8” BSP male/female $8.95 2 or more $7.25 ea.
long life. Air output: 35 to 40 liters/minute. Pressure adjust range: 0 to 57 psi. Auto start N. #86120 Air Line Adapter 1/8” BSP male to 1/4” BSP male $6.95 2 or more $5.65 ea.
at 43 psi; auto stop at 57 psi. Includes carry handle, suction-cup feet, two airbrush holders,
P. #86121 Air Line Adapter 1/8” BSP M to 1/4” BSP female $6.95 2 or more $5.65 ea.
thermally-protected motor, 6’ line cord, and body-mounted on/off switch. Weight: approx.
24 lbs. Overall size: approx. 14” long x 5-1/2” wide x 14” high. 110VAC. List $220.00 $189.95* Q. #86122 Air Line Adapter 1/4” NPT male compatible $6.95 2 or more $5.65 ea.
*Use our website shopping cart to calculate freight charge or shipments outside 48 contiguous U.S., or call our order line for assistance. R. #86107 Spray Booth Turntable Included with Fold-Up Booth. $12.95 2 or more $10.95 ea.

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 71
 Follow us on
See our website for a video of this item in use

Micro-MakeTM Doctor DryBooth – and Doctor DryBooth XL – Cut Paint Drying Time in Half!
Nothing stifles productivity and progress on model building, crafting and woodworking projects like waiting for paint to dry. After years of searching, development and testing,
Micro-Mark has the solution – Micro-MakeTM Doctor DryBooth. As one of the most sought-after and asked-for products ever, Doctor DryBooth delivers on the promise of cutting
to a mere fraction the drying times of a wide variety of paints…including enamels. In our own testing, we found that a commercially produced styrene plastic model car body
painted to full coverage with a popular spray enamel was dry to the touch in 25 minutes, dry enough to handle without fingerprints in 50 minutes and cured hard and smooth in
75 minutes using Doctor DryBooth. The model exhibited no sign of melting, warp or other distortion. The same model car body, sprayed side-by-side from the same can of paint
at the same time and under the exact same conditions, then left to air-dry, took more than double the time to be dry to the touch and much longer still to be fully hardened and cured.*
#88043 Micro-MakeTM Doctor DryBooth Available exclusively through Micro-Mark, Doctor DryBooth is a professional-quality product designed specifically for modelers and
makers and built to exceed your expectations. The heart of this well-designed unit is its integrated warm air convection system, which circulates gently heated air through the
cabinet and around your project, resulting in a superior finish in an incredibly short amount of time. Temperatures inside the cabinet can be set from approximately 135 degrees –
great for finishing die-cast, other metals and wood – to approximately 100 to 105 degrees – ideal for plastic, resin and more. A built-in baffle beneath the circulating
fan and clear tempered glass door keep dust particles at bay while your project dries. Time dial sets drying interval up to 25 minutes; Heat dial sets temperature.
Interior dimensions of the metal cabinet are 10-1/2” wide x 13-3/4” high x 7-1/2” deep (1,082 cubic inches); overall size is 10-5/8” wide x 18” high x 8” deep. Includes 2
chrome plated metal racks which can be adjusted to 13 positions within the cabinet and 6’ cord with standard plug for household outlets. List $224.95 . . . Our Price $169.95**
#88617 Micro-MakeTM Doctor DryBooth XL You asked for it, now you’ve got it! Designed specifically for anyone producing larger-scale projects and/or many items simultaneously,
Doctor DryBooth XL offers over FOUR TIMES the interior volume as our original Doctor DryBooth, allowing you to maximize production efficiency and minimize downtime. Using
the same time and temperature controls as the original and based upon the same warm air convection principals, the XL adds a second fan to provide greater air circulation and
a maximum temperature of approximately 115 degrees. Interior dimensions of the metal cabinet are 33” wide x 11” high x 12” deep (4,356 cubic inches); overall size
is 33” wide x 15-1/4” high x 12.75” deep. Doctor DryBooth XL features a huge 31” x 8-3/4” tempered glass window set in a solid metal-framed door equipped with $
13
heavy duty magnetic closures and full-length, bottom-mounted piano hinge for easy one-handed open/close. Includes one heavy duty powder-coated metal rack ADDITIONAL FREIGHT
ANYWHERE IN
which can be adjusted to 17 positions within the cabinet and 6’ cord with standard plug for household outlets. List $499.95 . . . Our Price $399.95** LOWER 48 STATES

Model ship builders take note: This booth can hold not just one, but TWO 1/350 scale battleship hulls (one above, one below) without coming close to touching the interior walls of the cabinet.
*This case study was performed on our original Doctor DryBooth and is for general reference only. Your results may vary based on humidity, ambient temperature, type of paint and other factors. We recommend you perform your own tests for best results.

Special Knife Makes Perfect The Best Masking

Parallel Cuts in Masking Tape, Tape…Ever!
Paper and So Much More! This ultrathin masking
tape from 3M, used for
creating wild designs on
1:1 hot rods, bikes, etc.,
will follow curves like no
If you’ve ever tried to use masking tape other you’ve ever tried…
on models or other small projects, you and because it’s a flexible
know that wide tape just won’t follow plastic, it conforms and
#60725
#83046 Airbrush Cleaning Kit includes compound curves without buckling. Our clings to fine details. Tape
swabs, wood picks, micro brushes, scrub Parallel Cutter will cut tape and a wide holds tightly, yet is removed easily without leaving any adhesive
brushes, solvent-resistant funnel, pipettes, variety of other materials into strips 1/16” residue. Use what pros use to get the sharpest edges ever!
solvent cups, dispenser bottle, lint-free to 5/8” wide quickly and accurately. You can even cut circles using #60725 3M Tape, #60726 3M Tape, #60727 Set of one
cleaning/polishing cloths and a pair of one blade as a pivot. Made of aluminum and steel. Includes 4 blades. 1/8” wide x 36 yds. 1/4” wide x 36 yds. each 1/8” and 1/4”
latex gloves. $15.95 #83651 Parallel Cutter $32.95 #83652 Extra Blades (2) $5.95 long $12.95 long $14.95 3M Tape $24.95

#86118 MicroLux® Mini Sandblast Gun Set Fine abrasive grains

remove old paint and rust without harming surface details…even
on plastic…and inside recessed areas impossible to reach with any
other method. Engraves intricate designs in metal and glass (when
used with a stencil) and distresses wood as well. Operates from
propellant can (order #85590 separately) or from any air compressor #90078 Chartpak® Graphic Art Tape
producing 30 to 45 psi (max: 65 psi). Set includes gravity-fed sandblast #88303 #88302
The thin, flexible 1/32” material is great
gun with 1/8” BSP male fitting, 15 cc (0.5 fl-oz) cup assembly with Tamiya masking tape is made specifically for making curves and its permanent
cover, 6’ braided air hose, plus 1/8” BSP male to 1/4” BSP female for modeling use. It is super-thin, adhesive material works on a variety of
adapter to fit typical hobby/art compressors, 4 oz of aluminum super-strong, does not absorb paint, surfaces, including plastic, whiteboard,
oxide abrasive, hang-up hook, air mask, and instructions. and leaves no residue when removed. glass, paper, wood, metal and ceramic.
List $79.95 . . . Our Price $69.95 #88302 Tamiya Masking Tape, 18 mm Great for mimicking metal bands on train
#84296 Paasche AEX-5 (3/4”) x 60’ roll with dispenser $7.95 loads! For indoor use only on clean, dry
Aluminum Oxide Abrasive, #88303 Tamiya Masking Tape, 40 mm surfaces. 1/32” wide x 648” long, black
5 Lbs. $29.95** (1-1/2”) x 60’ roll $5.95 crepe, 1 roll. Made in the USA. $7.95

72 • ORDER TOLL FREE 1-800-225-1066 **Use our website shopping cart to calculate freight charge or shipments outside 48 contiguous U.S., or call our order line for assistance.
 Sta-Wet Handy Palette SUPPLIES HAND TOOLS Follow us on
Super Value Package
Mix Art and Hobby Paint Cordless Mixer
Use Your Airbrush with the Push of a Button! for Model
or Sandblast Gun Paints
without a Mixes
Compressor paint
in-the-
#85590 Paasche Airbrush bottle for
Propellant, 12 oz consistent
Keeps your paint fresh and ready to use. Ships by ground to color every
Package includes: 48 contiguous U.S. only. time. Just
• #81415 Rinse Well • #85941 Sta-New Brush Holder $12.95 insert the spin
• #89655 Sta-Wet Handy Palette • #89657 Sta-Wet disk and push the
Sponge, 3 Pack • BONUS! Includes #89656 30-pack of button. It even mixes old,
Sta-Wet replacement acrylic sheets, a $9.95 Value! Airbrush Cleaning settled paint. To clean, spin
#89655K Sta-Wet Handy Palette Super Value Package in a bottle of thinner.
Value $80.75 Super Buy $64.95
Station Our paint shaker mixes all types of paints Handles bottle depth
better and more thoroughly than you can up to 3”. Uses two AA
with a stick or hand-shaking. Accommo- batteries (not inc.).
RINSE WELL is dates all small art and hobby size bottles #80975
Like Having a and cans up to 1 oz. Paint Mixer $10.95
Sink on Your #27162 Paint Shaker, 120VAC $64.95
Workbench #27162A Paint Shaker Strap $1.95
Airbrush
not included Funnels for Filtering & Pouring
Cleans your airbrush without overspray. Paint, Solvents and More
Keeps your airbrush in top working order
anywhere your work takes you. Specially
designed lid works with many brands of
airbrushes. Incorporates a convenient
built-in airbrush stand and easy-to-change
filter assembly. Includes cleaning station,
2 airbrush tip fittings, 2 filters and 24 oz
The “Rinse Well” keeps you supplied with screw-top container to contain cleaning
clean rinse water when brush painting with station without spills.
water-based paint. Just rinse your brush in #84684 Table-Top Airbrush
the well. Then press the button and the Cleaning Station $34.95 #83119 Miniature Strainer Funnel Set
dirty rinse water drains into the base while Stainless steel strainers trap debris long #86400 Airbrush Cleaner for Water-Base
#84725 Replacement filter Paints Spray this special formula through
the well automatically refills with clean for Airbrush Cleaning Station $9.95 before it reaches your airbrush. Ideal for all
water. Saves time and eliminates the mess types of hobby paint, these solvent- your airbrush to clean, lubricate, and main-
of filling and refilling several rinse contain- resistant funnels are the perfect size and tain it in peak operating condition. To
ers. 7” diameter base; 20 oz bottle capacity. shape to prevent spills while transferring remove stubborn deposits, immerse in the
paint from bottle to airbrush cup or cleaner, then rinse clean. Shipped in two
#81415 Rinse Well $25.95 200 ml bottles (400 ml / 13.5 liquid oz total).
siphon jar. Set includes 3 funnels: one each
with medium, fine and extra-fine mesh From Acrylicos Vallejo. List $19.95 $14.95
Keep Airbrushes strainers. Funnels clean up easily with
Within Easy solvent for use over and over again. $19.95
Reach and Out
of Harm’s Way Hold-It
Our airbrush holder TM
provides safe, secure Easy…
storage for all airbrush The Better
brands…up to 4 at a
time! Rubber-coated
Way to
head tilts and rotates Paint
#80770 Holding Tool is great for holding
to hold your airbrush Models micro size parts while painting, gluing or
at the perfect angle
for filling paint 12” long handle keeps your hands away positioning. Tweezer-type jaws grip tightly
cups. Clamps from overspray when airbrushing. Adjusts with one hand by sliding knurled ring
to work surfaces to hold models with inside dimensions towards tip. Holds objects up to 3/32” thick.
up to 2-1/4” thick. from 1/2” to 5”. Made of aluminum and #60392 4-piece Polyethylene Miniature Made of stainless steel. 4-1/4” long. $11.95
steel with neoprene rubber jaw pads. Funnel Set is solvent-resistant and great
#83408 for general purpose use. Set includes two
Airbrush Holder $21.95 #80968 Hold-It Easy Handle $15.95 #80923 Mask-It EASY
2” dia. with 1/4” neck and two 1” dia. with
Apply this high-quality
3/8” neck. All have hang-up holes. $10.95
Protect Your Furniture from Workplace Spills liquid masking film
where you don’t want
Durable SlipGrip Hobby
paint to stick. Works
Mat protects your
especially well in small
furniture from dirt, glue,
crevices where masking
paint and abrasion. The
tape is impossible to
no-slip bottom surface
apply. Paint won’t
holds the mat in place
bleed through or seep
while you work. Between
under edges. Can be
projects, simply wipe
sprayed or brushed on.
the non-stick top
Dries in 1 to 2 hours.
surface clean, then roll #87164 15-pc. Micro Funnel Set is made Thins and cleans-up
up and store in the of durable, chemical-resistant polypropy- with water. 8 fluid oz
included poly tube. lene for use with paint, solvents, fuel and bottle. (Not for use on
#85221 SlipGrip Hobby more. 5 each of 3 shapes shown. 3/4” to porous materials.) $11.95
Mat (18” x 18”) $27.95 1-1/2” dia. x 7/8” to 2-1/4” long. $12.95

See our website for a video of this item in use 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 73
 HAND TOOLS SUPPLIES

Fine Nylon Micron Paint Brush Sets for Expert Paint Control and Comfort Specialty Brushes
Brush
These affordable, durable mini
#86319 #86320 with the Handle You’ll Love
brushes are the perfect choice
Set for super-detailed work. Micron
brushes employ the finest
synthetic hair, with seamless
ferrules and unique, tri-color
lacquered white birch handles.
Thicker-than-usual handles give
you comfort and expert control
with all paints. 3 brushes per set.
#86321 #86322
List $19.45 . . . Our Price $14.95/set
Moderately priced craftsman brushes #86319 #86321 Flat
A B C D E F G H
apply smooth finishes with either solvent Detailers 15/0, Shaders 15/0,
or water based colors. Made with shed- 10/0 and 5/0 6/0 and 2/0
proof nylon bristles, seamless ferrules
#86320 #86322 Bent
and wooden handles.
Pointed Flats Liner 15/0, Fan These beautifully made brushes are ideal
#81767 10-piece set includes rounds 15/0, 6/0 and Blender 3/0 and for models, miniatures, bird carvings, wild-
#3/0, #2/0, #0, #1, #3, #5, shaders #2, #6, 2/0 Shader Flat 2/0 Handle diameter: 5/16” • Length: 6-3/4” fowl art and whenever super fine details
#10, and fine glaze #5/8. $24.45 are an important part of your project.
The World’s Smallest Paint Brushes? The unique comfort-grip handles (about
Golden Eagle Brushes… the same diameter as a pencil) let you
Better Than Red Sable #84651
paint with complete control for hours. All
brushes are approximately 6” long with
#84650 seamless nickel ferrules and smoothly
sanded and lacquered hardwood handles.
#84649 The extra fine synthetic filament is the
same as we use in our Golden Eagle
brushes. Use with solvent or water based
#84648 paints. Imported from Japan.
A. #81205 10/0 Filbert $8.95
(rounded tip)
These micro-miniature 30/0 brushes are perfect for tiny detail painting. The synthetic B. #81206 20/0 Script $9.95
bristles are compatible with all types of paint and are held securely by seamless nickel (for pin stripes)
ferrules. The specially contoured wood handle nestles comfortably into your hand, pro- C. #81207 12/0 Angular $9.95
viding pinpoint control and eliminating fatigue. The flat surface on one side performs (tip cut 45°)
5 3 1 2/0 5/0 1 2 3 4 double-duty as a thumb rest and prevents the brush from rolling off your workbench.
Overall length approx. 4-1/2”. (Note: color may vary.) List $13.50 ea. . . Our Price $10.95 ea. D. #81208 20/0 Round $8.95
ROUNDS FLATS
(with sharp point)
ROUNDS Size Price #84648 Brush #3 #84649 Brush #6 #84650 Brush #9 #84651 Brush #25 (for striping)
#60409 5 $6.95 E. #81209 20/0 Spotter $8.95
#60410 3 $5.95 #84709 Set of 4 brushes – one each of above $34.95 (for tiny details)
#60411 1 $5.95 F. #81210 12/0 Grass Comb $9.95
#60412 2/0 $5.95 Heavy Duty Denim Shop Apron (for grass, hair etc.)
#60413 5/0 $5.95 Protects You from Messy Paints, G. #81211 10/0 Shader $8.95
#60432 Set of 5 – SAVE! $26.95 Gooey Glues and More (flat, straight tip)
FLATS Size Price Our below- H. #81212 20/0 Liner $9.95
#60448 1 $5.95 the-knee- (for thin lines)
#60414 2 $5.95 length blue #81213 BEST BUY! Set of 8 $65.95
#60415 3 $5.95 denim apron
#60416 4 $6.95 is not only
#60433 Set of 4 – SAVE! $20.95 functional, but Set of 6 brushes
good looking includes 3 each
as well. Has #0 and #1
Economical, disposable brushes for wood small pocket
glue, spreading epoxy, small parts dusting for pens,
and cleaning, and paint touch-up. Horse- rulers, etc. and
hair bristles set in tin handles. 1/2” wide side pocket for
brush. 6” long overall. 48 brushes per pkg. whatever.
#15139 Disposable Brushes (48) $9.95 Straps tie in
the back.
Completely #86328 Detail Brush Set Long-preferred
Cotton Gloves Protect washable. by expert model crafters, these brushes are
Finishes and just the right size for precise fine-point paint
#60473 Denim Apron $18.95
application and hold enough paint for good
Hands coverage without excessive reloading.
1/2” 3/8” 1/4” 1/8” 3/0 5/0 10/0 Pipettes for Synthetic red sable bristles are suitable for
ANGULAR LINERS Precise Liquid both solvent- and water-based paints, and
Measurement clean easily without bristle damage. Set of
ANGULAR Size Price 6 brushes includes 3 each of #0 and #1 sizes,
#60774 1/2” $8.95 and Mixing with 4-1/2” long white poly handles. $19.95
#60775 3/8” $7.95 2 cc graduated
#60776 1/4” $5.95 polypropylene pipettes #29127 Tamiya Liquid
#60777 1/8” $4.95 work like large eye
Thin, light-weight, disposable cotton Surface Primer, White
#60778 Set of 4 – SAVE! $24.95
gloves let you handle models without droppers to precisely Use to prime surfaces for a
LINERS Size Price leaving fingerprints. Protects both painted measure and dispense perfect paint job every time.
#60779 3/0 $4.95 and unpainted surfaces. Also ideal for paint, resins, solvents Sold in a case of six
#60780 5/0 $5.95 handling metal objects while polishing. and other liquids into 40 ml bottles. $32.95
#60781 10/0 $5.95 One size fits all. 24 gloves per package. mixing containers. Ships by ground to
#60782 Set of 3 – SAVE! $14.95 #70221 Cotton Gloves (24) $13.95 #82607 Pipettes (pkg. of 20) $14.95 48 contiguous U.S. only.

74 • ORDER TOLL FREE 1-800-225-1066 • OUTSIDE USA CALL 1-908-464-2984 • OUTSIDE USA CALL 1-908-464-2984
 SUPPLIES HAND TOOLS Follow us on
#88139 Doc O’Brien’s Micro-Mesh Sanding and Polishing Products Create
Paint Tower Ultra-Precision Softback
This clever vertical Glass-Smooth Finishes on an Amazing Variety of Surfaces Polishing Sticks for
storage system can Softly padded, double-sided flexible files let
hold up to 56 bottles you sand convex or concave curves, small
Flawless Finishes
of paint in a miniscule slots and other hard-to-sand shapes without
4” diameter space, gouging or scratching. Each end of the file
putting the otherwise has a 15˚ taper for deburring, sanding and
wasted airspace above polishing hard-to-reach areas. Use them on
your work area to wood, metal, plastic, fiberglass and most
good use. Hung from other materials. Clean with soap and water
a pegboard or for longer life. 1/8” thick x 1/2” wide x 5-3/4”
suspended from the long. Use dry or wet for ultra-smooth finishes.
ceiling, this 21” tall #86128 9-piece Dual Angle Sanding File
tower neatly stores Set includes 5 standard files for normal use,
virtually all brands of plus a set of 4 extra-fine files for removing
hobby paint, including imperfections and restoring clear plastic Unlike regular sandpaper which is prone
Acrylicos Vallejo, items. Works equally well on other plastic, to wrinkling and tearing, the cushioned
Micro-Mark, Tamiya metal and painted surfaces. Includes 60, 80, sponge backing of Infini Model’s Softback
and more. Includes 100, 150, 180, 240, 400, 600, 800, 1200, 1500, Polishing Sticks is designed to follow the
7 adjustable shelves, 1800, 2400, 3600, 4000, 6000, 8000, and 12000 contours of your project beautifully, result-
hardware and swivel grits. $16.95 ing in a finer finish in less time. Each stick
hook. is double-sided for twice the life, with a
List $29.95 $26.95 semi-flexible plastic backbone in the middle
2 or more $22.95 ea. #80939 for a firm grip and added pressure when
#81601
working in confined areas. Set of eight
Removes caps and lids 5-1/4” x 3/4” x 1/8” thick sticks includes one
up to 5” in diameter! each 400, 600, 800, 1000, 2000, 3000, 5000
and 7000 grit. Use wet or dry.
#88642 Softback Polishing Sticks $10.95

Organize, Dry
With grits ranging from 2400 to 12000, the Micro-Mesh Polishing Kit is not only ideal for
and Protect
#81313 Jar Opener Adjustable tool easily creating or restoring a high-gloss finish on painted and unpainted surfaces, it can also Your Paint
removes caps from all sizes of paint jars in be used for creating crystal clear finishes on full-size non-glass canopies and windscreens, Brushes
seconds. Also removes vacuum caps, snap- polishing metals, and producing ultra-smooth finishes on wood. Kit includes everything
on caps and every other type of screw-on you need to bring your next project’s finish to a dazzling shine, whether used dry or wet:
cap up to 5” dia. Made of chrome-plated six 3” x 4” sheets of Micro-Mesh in 2400, 3200, 4000, 6000, 8000 and 12000 grit; foam Brushes
sanding block; micro-gloss polishing cream; 13” x 17” non-woven polishing cloth, and not
steel. $9.95 2 or more $7.30 ea. included
instructions. #80939 Micro-Mesh Polishing Kit $34.95
4” x 6” Micro-Mesh Sheets – Only $5.95 per sheet
#80940 #80941 #80942 #80943 #80944 #80945
2,400 grit 3,200 grit 4,000 grit 6,000 grit 8,000 grit 12,000 grit
#15143
Brush Cleaner Soft Touch Polishing Pads feature the same Micro-Mesh abrasives described above lami-
with Drying nated to both sides of a 2” x 2 ”x 1/8” soft foam pad with rounded corners. Unique cushioned
Overall size:
Rack design, comfortable size and ergonomic feel provide additional control and less pressure 11-1/4” long x 3-1/2” deep x 4-1/4” tall
suspends for the more intricate contours and smaller areas of scale models. Set of 6 two-sided pads
brushes in in the same grits as above. #81601 Set of 6 Soft Touch Polishing Pads $12.95 The Sta-New brush holder keeps 10 brushes
paint thinner, neatly organized and lets them dry in the
water and Carousel Organizers best way possible…bristles down. Clear
other solvents Save Space and Keep Paints plastic, compartmented base catches drips
to loosen and keeps table top dry. Mounts to wall or
paint without
and Brushes Handy workbench and snaps together in seconds.
damaging Carousels are not only a pleasure to #85941 Sta-New Brush holder $24.95
bristles. use, but also are a great way to clean
4” x 2” aluminum tank with nickel plated up your work area and keep it Clean and Protect Your Paint
spring holder includes removable screened organized. Heavy duty ball bearing
bases allow carousels to spin almost
Brushes for a Long, Useful Life
basket for small parts cleaning as well.
Holds brushes 5/32” diameter and up. Use effortlessly, making it easy and quick Brushes,
with water, linseed oil, turpentine and to find the right color. As a bonus, holder and
include a large knob for carrying #83149 jar available
more! List $22.50 . . . Our Price $15.95 separately
and turning. Made of durable
polymers with sturdy metal bearings.
Designed to hold small paint jars from
nearly every manufacturer. Each model
includes assembly instructions with a
template for drilling holes for paint
brush storage, if desired.

Get a Grip #83149 Model 40 Carousel has two

Color shelves; holds 32 large bottles,
on Fine Detailing may vary 40 medium bottles or 60 small bottles
(mix and match from 3/4 to 2 ounces). After cleaning your paint brushes, give them
Built-in springs and no-mar plastic pins the Brush Saver treatment. A final rinse in
11-1/2” diameter x 7-3/4” high. $39.95
grip small parts with just the right pressure Brush Saver cleaner/conditioner removes
to hold objects securely without damage. #83150 Model 80 Carousel has four deep down paint particles and leaves the
Perfect for painting, assembling, drilling shelves; holds 64 large bottles, bristles clean, soft and pliable, ready for your
and more. 4” long x 1-1/4” wide. 80 medium bottles or 120 small bottles next painting session. 16 oz bottle. (Shipped
#83436 Spring-Loaded Parts Holder $10.95 (mix or match from 3/4 to 2 ounces). via UPS ground only.)
#83150
3 or more $8.95 ea. 11-1/2” diameter x 17” high. $54.95 #86591 Brush Saver, 16 fluid oz $17.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 75
 SUPPLIES
Our resin-casting and mold-making materials are provided in practical, user-friendly Large, Lab-Quality, Printed Graduation #88843K
quantities for maximum efficiency and exceptional results. These professional- Beakers are a Necessity When Blending Beaker Set
grade products are easy to use and easy to master, unlocking a world of possibilities High Volumes of Resin, Rubber and
for all makers. There is no limit to what you can do! Plaster for Mold-Filling
Reusable, superior-quality, poly-
Everything You propylene thick-wall graduated
Need to Start Casting in beakers make mixing materials
easier than ever before. Example: fill
One Complete Set! one beaker with Part A and another
#82698 Complete Resin Casting with Part B. Stir them individually,
Starter Set includes one each of then combine both parts into one
the following: larger wide-mouth beaker for final
• ONE-to-ONE / Rapid Mold Rubber mixing. Integrated non-drip, low-
• CR-600 Casting Resin form tapered spouts facilitate the transfer of materials so you can pour a thin line,
eliminating the bubbles that create air pockets in mold rubbers and resins. Filling each
• Rubber-to-Rubber Mold Release
container to the top line leaves about 1” from the rim, allowing thorough mixing without
• Modeling Clay spilling. FDA Compliant. Made by Kartell in Italy.
• Mixing Set Note: If you use platinum- and tin-cure materials, order additional containers to avoid cross-contamination.
• Rubber-to-Resin Mold Release #88843K Beaker Set includes three beakers; two 500 ml and one 1000 ml $30.95
Set ships by ground to #88843 500 ml Beaker $9.95; 3+ $8.95 ea. #88847 5000 ml Beaker $49.95; 2+ $34.97 ea.
48 contiguous U.S. only.
#88844 1000 ml Beaker $14.95; 3+ $13.95 ea. See additional images
Value $126.50 . . . Our Price $99.95
#88846 3000 ml Beaker $35.95; 2+ $28.95 ea. and details at micromark.com
One-to-One mold-making products are easy to mix and easy use for exceptional results Ten-to-One mold rubber is ideal for complex RTV Silicone Putty makes a mold in
molds and casting thin sections Just 10 Minutes!

One-to-One / Express One-to-One / Rapid Ten-to-One / High Tear-Strength RTV Silicone Mold Putty
• 6 minute pot life; 30 minute cure time. • 30 minute pot life; 4 hour cure time. • 45 minute pot life; 24 hour cure time. • 2 – 3 minute working time;
• 2.6 lb. kit contains approx. 32 fl. oz. total • 3.2 lb. kit contains approx. 32 fl. oz. total • 2.2 lb. kit contains approx. 28 fluid oz 10 – 20 minute de-mold time.
material. Blue color; platinum cure. material. Blue color; tin cure. total material. Tin cure. • 1 lb. kit contains approx. 11 fluid oz
#86226 $44.95 #82083 $39.95 #82663 $49.95 total material. Platinum cure.
One-to-One products are economical general purpose mold rubbers that are easy to mix: Special formula is ideal for making highly #81853 $36.95
Simply stir equal volumes of A and B together and pour. Use your molds again and again durable molds, even those which include The fastest, easiest way to make a mold!
to make multiple resin castings, even those with slight undercuts. De-airs without vacuum. thin sections and/or deep undercuts that Use your fingers to mix equal volumes of
put extraordinary stress on mold rubber parts A and B and press the putty around
RESIN CASTING 101 Generally speaking, most projects begin with a “master” or “pattern” – an original when castings are removed. Mix 10 parts your pattern. After 10 minutes, remove
object that you wish to reproduce. Use a soft mold material to make rigid castings, such as model parts, sculptural of A with 1 part of B by weight* and pour your pattern and your mold is ready for
pieces and other hard finished objects; use a rigid material to make soft castings, such as masks, prosthetics and into mold box. Includes 2 lbs. of part A use. Fill mold with resin, plaster, wax…
cosplay pieces. Molds made with platinum cure silicones exhibit the lowest shrinkage and have the longest life.
and 0.2 lbs. of part B. anything.

MICRO-MARK CASTING RESINS… General Purpose Casting Resins Extra strength resin for thin, The ideal resin for making detailed
Are user-friendly, water-thin, odorless, detailed castings castings in color
Make parts fast...
and pour easily, resulting in perfectly
and faster
formed, bubble-free castings. Just mix
equal volumes of A and B together and
you are ready to go! Each resin product
provides excellent reproduction quality,
and can be painted, sanded, sawn, filed,
tapped, milled and drilled. These resins
are compatible with all mold-making
materials, including latex, clay and RTV
silicone, and may even be used as a
super-strong glue for bonding metals,
soft woods and plastics. Resistant to
fuels, acids and most chemicals when
cured, non-tacky, and with no oily
residue after curing like other casting CR-300 Quick-Cure Casting Resin CR-900 High-Strength ColorCast Pigmentable
resins. Each resin product includes • 1 minute pot life; 15 min. de-mold time. Casting Resin Casting Resin
instructions. • 2.4 lb. kit contains approx. 32 fluid oz • 20 min. pot life; 16 hour de-mold time. • 3 min. pot life; 15 min. de-mold time.
total material. Cures to white color. • 2 lb. kit contains approx. 26 fluid oz total • 2.4 lb. kit contains approx. 32 fluid oz
*Our #83825 Digital Scale #81544 $35.95 material. total material.
is ideal for measuring out #82659 $39.95 #82133 $35.95
#82663 Ten-to-One CR-600 Casting Resin CR-900 attains extra-high levels of ColorCast has the same properties as
High Tear Strength • 7 minute pot life; 30 min. de-mold time. strength and rigidity needed for very thin our water-thin CR-300 resin, but cures to a
Mold Rubber! • 2.4 lb. kit contains approx. 32 fluid oz castings (less than 3/16”). 1:1 mix parts transparent neutral-amber color that lets
List $37.45 . . . $29.95 total material. Cures to white color. A and B. Cures to near-white color. you cast-in color by adding pigments
#82057 $35.95 Reaches ultimate strength in 48 hours. (available separately).

76 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
Follow us on SUPPLIES HAND TOOLS POWER TOOLS
Casting and Mold-Making Accessories Metal Casting
Highly Concentrated Opaque Pigment #86793 Mini Metal Foundry Super
Requires only 2 or 3 drops per ounce of resin for full color. Value Package
Can be blended into an infinite number of custom colors. Learn how to cast low-temperature
Compatible with epoxy, polyester and our ColorCAST urethane metals and make your own metal
casting resin. 1 oz squeeze bottles. $10.95 each pieces and parts.
#83177
#82134 White #82136 Red #82140 Yellow Set includes:
• #86226 One-to-One/Express Mold
#82135 Black #82138 Blue #82141 Brown
Rubber • #83093 Casting Metal Type
#82139 Green 280 (3) • #88397 Casting Ladle
#83094 Set of all 7 pigments. List $76.65 SAVE! $57.95 • #80965 Metal Casting Booklet
• #86534 Butane Micro Burner
• #60909 Butane Fuel
#80475 Rubber-To-Rubber Mold Release
• #80966 Casting Talc • #80475
Required when making two-part RTV molds. Keeps
Rubber-to-Rubber Mold Release.
mold halves from sticking together. 2 fl. oz. Not for
use with resins. $10.95** Value $148.60
Super Buy $114.95**
#80476 Modeling Clay A special synthetic clay
that will not contaminate silicone rubber. Use for Cast Your Own Metal Parts
#80475 #80476 Pour these metals
containing flow of RTV during mold making and for into a silicone
making simple molds. 1 lb. $12.95 with these Low Temp. Alloys rubber mold to
#84191 Rubber-To-Resin Release Liquid Brush-on Now you can cast small metal parts with form your own
fine detail using our complete selection of castings
Rubber-To-Resin Release Agent prevents resin-cast
objects from sticking to mold rubber. 2 fl. oz. $20.95 casting metals and materials. No foundry
is needed – just melt the metal in a ladle
#82415 Mixing Set Includes 24 two-ounce capacity
#84191 #82415 held over a flame and pour into a silicone
plastic mixing cups (calibrated in quarter-ounce
rubber mold. Save money by casting your
increments up to 1.5 oz) and 24 stir sticks. $16.95**
own ship fittings, miniature figures, toy
#83671 Xtend-It replaces moisture-laden air with a wheels, model railroad detail items, doll-
dry gas, increasing the shelf life of polyurethane house hardware, and much, much more…
products up to 4x or more. Net weight 10 oz (ships and have fun doing it!
by ground to 48 contiguous U.S. only). $25.95**
#83092 Type 160. Tin/lead/cadmium/bismuth alloy. Melts at approx. 160°F. Can be
#82664 Rubber-To-Resin Mold Release Makes it melted with a candle flame. Extremely low temperature allows this metal to be poured
easy to remove resin castings from molds. 12 oz. into molds of clay, wood, even cardboard. Can also be poured into model locomotives
spray (ships by ground to 48 contiguous United to increase traction weight. Keep away from children. 8 oz nugget (1.35 cu. in.). $16.95
#82664 #83671 States only). $19.95**
#83093 Type 280. Tin/bismuth alloy; lead and cadmium free. Melts at approx. 280° F.
#83177 Silicone Mold Rubber Thinner Are your Can be melted with small butane torch. One 7.5 oz nugget (1.35 cubic inches). $18.95
molds capturing every detail? Our thinner reduces
#83104 Type R. Lead-free Crown Pewter (92% tin). Melts at approx. 575°F. Can be melted
the viscosity of silicone mold rubber so it will flow
with a readily available plumbing propane torch. One 15 oz bar (4.1 cubic inches). $47.95
more easily into the intricate details of complex
patterns. Add up to 15% by weight to silicone rubber #82388 Type CT. Almost pure lead (keep away from children). Melts at approx. 500° F.
part A. 1 lb. $21.95 Can be melted with a readily available plumbing propane torch. One 24 oz bar (4.9 cubic
inches). $25.45
#80352 Mixing Set Includes six 8 oz calibrated
#83177 #80352 plastic mixing cups, six stir sticks, 3 brushes. $7.95 #80966 Industrial Talc. Used to de-air molds for even metal flow.
A must for use with RTV rubber molds. Approx. 2 oz. $4.95
Plate steel, iron, copper, Plug N’ Plate is safe, easy to use,
and ideal for plating repair, model The Best Way to Heat
brass, bronze and tin building, gunsmithing and more. #60909
Low Temp Metals for Casting
Cast metal engine Connect the power, apply solution,
Micro burner sits on your bench top, providing the
AFTER and watch in amazement as a
ideal flame for heating low-temp casting metals in
gleaming new finish appears.
Cast metal a ladle (#88397, sold separately). Flame intensity
engine BEFORE Each kit includes 110VAC wall is adjusted by turning the knob. Includes built-in #86534
transformer, 16 oz plating solution, igniter. Non-tipping base is 3” diameter.
Note: to plate die cast or pot metal clip leads, plating wand, and
parts, you must first apply a base of copper. Works continuously for 1 hour at max. temp of 2400˚F.
instructions. $59.95 per kit
#86534 Micro Burner
#83082 #83083 #83248 List $42.73 . . . Our Price $39.95
Nickel Plating Kit Copy ChromeTM Plating Kit Copper Plating Kit for die cast & steel
#60909 Butane Fuel (42 grams) $6.95**
Solution Refills, 8 oz – $19.95 each #88397 Melting and Pouring Ladle. Steel with wood
#83085 Nickel solution #83086 Chrome solution #83249 Copper solution handle. 8-5/8” long with 1-1/4” diameter bowl. $17.95

The MicroLux® Grit Blaster is Back!

Sand Blasting on a Miniature Scale has Never Been this Powerful, Fast, Clean or Easy!
The MicroLux® Grit Blaster takes the concept of an industrial-type blasting chamber and
reduces it to hobby size, creating one of the most useful tools in your shop. An ordinary
shop vac provides the power…no compressor is required. The resulting stream of air
is strong enough to efficiently remove paint and tarnish, yet gentle enough to use on
plastic models without damage. And since the cabinet is under vacuum, grit and debris
stay inside the chamber where it belongs. Grit Blaster includes clear plastic dome with
3 nozzle ports, blasting wand, positioning arm to move/support objects during blasting,
removable grit reservoir, and port adapter for standard 1-1/4” vacuum hoses. Overall size:
16” wide x 11” deep x 15” high. Blasting chamber is 8” wide x 7” deep x 6” high. Blasting
grit available separately, below.
#82775 MicroLux® Grit Blaster $299.95
Abrasive Grit for MicroLux® Grit Blaster, 5 lb. Tub
#84296 Fast Cutting Compound #82533 Crushed Glass for #82534 Glass Beads for
for aggressive cleaning $29.95 tarnish removal $24.95 a smooth finish $24.95
#86843 Vision Portals for Grit Blaster with removable self-stick backing adhere to the
inside of the blast dome to protect it from abrasion. Package of 5. $11.95

**Item ships by ground to 48 contiguous U.S. only. 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 77
 Our Micro-Mark Cosplay Construction Materials, Tools and Tool Packages are Innovative Game Changers You Won’t Find Anywhere Else
Micro-Mark CosFoamTM All-Purpose EVA Construction Material Micro-Mark MTPTM Moldable ThermoPlastic is the Ultimate Heat-Formable Construction Material
This sword is made entirely of MTPTM captures far
Micro-Mark CosFoamTM more detail than
Worbla when
pressed in a mold.
As shown at New York Comic Con What non-toxic, solvent-free material cuts easily with a scissor, is self-adhesive
and forms like magic with heat, can be layered, carved, sculpted and even laser-
Developed, produced and imported just for Micro-Mark, our CosFoamTM
cut, and has virtually zero waste because scraps can be reincorporated and
is a strong, durable, tear-resistant, higher-density closed-cell EVA
reused? Micro-Mark MTPTM! Imported exclusively for Micro-Mark, our MTPTM
foam that is ideal for creating simulated armor, weaponry, replicas,
(Moldable ThermoPlastic) is the same material professional costumers and prop
props and more. CosFoamTM is smooth on both sides, cuts easily with
makers from Broadway to Hollywood rely upon for creating the most realistic,
any ordinary hobby knife, forms beautifully and holds its shape with
highly-detailed, rigid, light-weight and extremely durable simulated armor,
the use of a heat gun, bonds together like welded steel with all popular
weaponry, props, sculptures and more. Sand color, 1 mm thick sheets.
brands of contact cement, and can be made to look remarkably like
metal, leather, wood and more using basic painting techniques ALL MICRO-MARK MTPTM SHIPS FREE!
and Micro-Mark finishing products. 24” x 24” sheets, 2 sheets per #89001 Micro-Mark MTPTM Jumbo, 39.25” x 59” sheet $74.95
package. #89062 Micro-Mark MTPTM Large, 19.5” x 29.5” sheet $24.95
#88612 CosFoamTM Black, 6 mm thick $9.95/pkg. (2 sheets) #89063 Micro-Mark MTPTM Medium, 9.8” x 14.5” sheet $18.95
Body armor and Helmet made
weapon details made 4 or more $8.95/pkg. (8 sheets) #89064 Micro-Mark MTPTM Small, two 5” x 10” sheets $9.95
with CosFoamTM
with Micro-Mark CosFoamTM #88613 CosFoamTM White, 4 mm thick $8.95/pkg. (2 sheets) #88678 Thermal Finger Guards, 6-pack. Pure silicone, heat resistant up to
and MTPTM
4 or more $7.95/pkg. (8 sheets) 400˚F. Great for use with heat guns while forming MTP. $12.95

Made with the highest-quality, natural ingredients, our Voodoo Makeup x Micro-Mark coconut cream to powder foundation actually nourishes and hydrates
your skin while you wear it, is water-repellent, buildable, and is weightless. A single pan typically lasts 6 to 9 months when used every day and has a 4 year shelf
life. From the fairest of them all to the deepest bronze, our makeup has you flawlessly covered. Hand-made in New Orleans, Louisiana, USA.

Voodoo Makeup x Micro-Mark Primary Color Collection, 2.9 g Pans Voodoo Makeup x Micro-Mark Flesh Tone Color Collection, 2.9 g Pans
#89046 Voodoo Red $28.00 #89049 Voodoo Yellow $28.00 #89051 Beautiful $28.00 #89054 Caramel $28.00
#89047 Voodoo Green $28.00 #89050 Voodoo Black $28.00 #89052 Bare Yellow $28.00 #89055 Latte $28.00
#89048 Voodoo Blue $28.00 #89057 Voodoo White $28.00 #89053 Beige $28.00 #89056 Beautiful Black $28.00
#89046K Voodoo Makeup x Micro-Mark 6-color Primary Color Collection #89051K Voodoo Makeup xMicro-Mark 6-color Flesh Tone Color Collection
#89340 Micro-Mark CosFoamTM RIGID EVA Foam The weapons-grade game includes one each of the primary colors above, plus #89016 case. $168.00 includes one each of the flesh tone colors above, plus #89016 case. $168.00
changer you’ve been waiting for is finally here! This is the ULTIMATE foam for
making every kind of rigid weapon in your cosplay arsenal, no armatures #89016 Micro-Mark Makeup Case 5” x 8” x 7/16” high case includes clear window lid with magnetic closure and holds up to fourteen 36 mm Voodoo Makeup
required. CosFoamTM RIGID EVA is super-light, cuts, shapes, carves and glues like pans. 7” x 4” magnetic interior floor holds metal makeup pans securely, even upside-down! $19.95
a dream and can be used to simulate everything from daggers to axes to guns #89058 Voodoo Foundation Brush is packed with bristles for ultimate softness and provides the absolute best finish on your skin. Perfect for our makeup. $38.00
to steel plates and much more! HUGE 42” x 20” x 1/2” thick sheet. $54.95 #89059 Voodoo Detail Brush provides a feather-weight feel while applying the product, its soft bristles delivering the most gentle touch and a flawless finish. $36.00

Ships by
ground only.
#89205 Micro-Mark MagiCutTM EVA Foam #89206 Micro-Mark EasyFloTM Contact #89297X2 Plasti-Dip is what the pros use to #89204 Cosplay Mini Belt Sander Package #84433K Thermoplastic Workstation
Scalpel Package provides surgical precision Cement Dispenser Set eliminates the mess, coat EVA foam pieces before applying paint. This is the most efficient tool you’ll ever use Package Use the foot switch to turn the heat
and 10 times the amount of clean, smooth waste and overwhelming fumes while applying Plasti-Dip bonds perfectly, provides excellent to contour, smooth, and create the finest gun on and off while your hands are busy
cuts in EVA foam vs. ordinary hobby blades. contact cement to EVA foam. Use for the coverage, and remains flexible, so paint top beveled edges in EVA foam. Set includes Mini shaping and forming. Silicone Mat allows you
Includes ergonomic handle and 10 carbon neatest, cleanest joints you’ve ever made! Set coats adhere without cracking or wrinkling. Belt Sander, 12V Transformer, 80 and 120 grit to press and shape thermoplastic without
steel no. 11 scalpel blades. $14.95 of five 4 oz bottles with caps. $10.95 Matte black; TWO 11 oz spray cans. $19.95 sanding belts. Step up to the best! $159.95 sticking. $58.95

#89273 Cos-Tools Foam #89094 Micro-Mark Cosplay Airbrush

Tool Kit Cut that previously Super Value Package Chosen for its value,
unachievable “perfect V-groove” versatility, ease of operation and
with the included V-Groove near-silent running, this high-quality
Cutter, or do it your way with package brings together our own
the Freestyle Cutter! Use the Dual-Action Airbrush (trigger controls
Channel Rail to guide the Snap both airflow and line thickness) and
Knife or use the Push, Straight, the Whisper Air Compressor. Ideally
or Bevel Cutter to get the job suited for cosplay, this impressive
done. The Circle Cutter and Hole set works equally well for creating
Cutter allow you to make any professional paint jobs on
size hole you need up to 6” with armor, weaponry and more, and
ease. Set includes 8 amazing for flawless application of special #89303 Vanity Makeup Mirror
Tools sold tools for one great price, plus effects and costume makeup. 12 LED bulbs last 50,000 hours. Smart Touch
individually online instructions. $169.95 Value $169.90 . . . Our Price $134.95 on/off/brightness control. Aluminum frame.
Mirror is 12” x 16”; frame is 14” x 19”. $84.95

78 • ORDER TOLL FREE 1-800-225-1066 • OUTSIDE USA CALL 1-908-464-2984 See our website for a video of this item in use
 Micro-Mark is Your One-Stop Source for Everything You Need for Cosplay, from Materials and Tools to Prosthetics and Makeup!

#88561 UreCoat® Flexible Urethane

Coating brushes on and bonds readily to
CosFoamTM, Smooth-On and other flexible #88555 FlexFoam-iT!™ X is ideal for a wide
foam products, providing a non-cracking, non- variety of special effects props including
flaking, paint-ready base coat. Moves and bends rocks, bricks, swords, knives, hammers, etc., #88550 Free Form™ AIR Lightweight #88560 Smooth-Cast® ONYX™ SLOW #88558 Smooth-Cast® 326 Colormatch
with your project while remaining impact- plus scenery, custom padding, cushions, and Epoxy Putty This low-odor, low-shrinkage urethane resin cures at room temperature to Pigmentable Resin This fast-cast, 1:1 mix
and UV-resistant. Mix ratio is 100:10 by weight so much more. Mix 1:1, pour into a mold, and 1:1 mix putty is unique and easy to use. a deep black, hard, solid plastic. Ultra-black resin was developed specifically for adding
(gram scale required). 8 minute pot life, re-coat FlexFoam-iT quickly expands approx. 6 times, Strong and rigid, but so lightweight it will and darker than competitive black resins, color pigments to achieve true color
time is 30 minutes; 16 hour cure. Contains no then cures to a solid, yet flexible white foam. float in water when cured. It can be pressed ONYX can be polished and buffed to a high representation. Formulated “color neutral,”
phthalates or VOCs. 1.1 lb. kit. $19.95 50 second pot life; 2 hour cure time. Ventilation into a mold, sanded, shaped, drilled, tapped, gloss shine. And, unlike other black resins, small amounts of pigment will yield accurate,
#83825 Digital Scale 11 lb./5 kg capacity, and safe handling is required. $26.95 machined and routed. Dries to gray. Readily ONYX is mercury-free. 1:1 mix ratio with very vivid colors using SO-Strong® pigments.
reads in 0.05 ounce or 1 gram increments. #86627 Ease Release 2831, 12.8 oz $36.95 accepts any paint and may be tinted with low viscosity. 5 minute pot life; 90 minute 9 minute pot life; 60 minute cure time.
5” diameter platen. $29.95 Ships by ground to 48 contiguous U.S. only. SO-Strong® pigments. 1.8 lb. kit. $39.95 cure time. 2.2 lb. kit. $29.95 1.9 lb. kit. $26.95

#88551 Rebound™ 25 Mold Rubber is an #88557 Dragon SkinTM 10 FAST is THE

easy-to-use platinum-cure silicone rubber #88562 Body Double™ SILK is a self- time-tested, versatile material for creating
which self-thickens for making brush-on releasing platinum-cure silicone rubber that everything from amazing skin effects to #88556 Ecoflex™ 00-20 is a versatile, easy-
#88559 Smooth-Cast® 65D Semi-Rigid molds of almost any model. It is perfect for can be applied directly to the skin to make medical prosthetics to production molds. Soft, to-use platinum-catalyzed silicone. Certified
Urethane Resin cures quickly to a semi-rigid subjects with deep undercuts, can be applied highly detailed molds of the face, hands and super-strong and very stretchy, cured Dragon Skin Safe by an independent lab, cured
plastic that offers excellent abrasion and to vertical surfaces without sagging and will other body parts. Certified Skin Safe by an Skin™ 10 is Certified Skin Safe by an inde- Ecoflex™ is very soft, super strong and may
impact resistance. 1:1 mix ratio and low cure with negligible shrinkage to a soft rubber independent laboratory, SILK will even pendent lab. An infinite number of color effects be stretched to many times its size without
viscosity for minimal bubble entrapment. Suit- mold. 4 thin layers are all that is needed. 20 release from closely-cropped hair-covered can be achieved by adding Silc Pig™ or Cast tearing, then rebound to its original form
able for roto-casting and tinting. 2.5 minute minute pot life; 6 hour cure time. 2 lb. kit. skin surfaces. 1:1 mix ratio. 6 minute pot life; Magic™. 1:1 mix ratio. 8 minute pot life; without distortion. 1:1 mix ratio. 30 minute
pot life; 15 minute cure time. 1.9 lb. kit. $26.95 $39.95 20 minute cure time. 1.7 lb. kit. $44.95 75 minute cure time. 2 lb. kit. $39.95 pot life; 4 hour cure time. 2 lb. kit. $39.95

#89230 Skin TiteTM Skin Safe Silicone is used to

create fast, realistic wounds and scars, and to adhere
Smooth-On Pigments are concentrated and silicone appliances directly to the skin. It can be sculpted
brilliantly colored. A little bit goes a long way! “on the fly,” offers maximum control, and stays precisely
3.2 oz sets. $39.95/set where you put it. Cured rubber is strong and will flex with
Cast Magic® is a new and easy way to add an #88553 SO-Strong® Set of 9 colorants can body movement. Wounds and appliances will not come
endless variety of bright metallic, glitter and be added to any Smooth-On liquid urethane off until you remove them. An infinite variety of color
color effects to finished castings. With the Cast rubber, urethane plastic, epoxy or urethane effects are achieved using Silc Pig™ silicone pigments.
Magic® System, you can create spectacular foam. NOT for use with silicones. Certified skin safe by an independent lab. 8 oz. $24.95
casting effects in a matter of minutes vs. hours #88554 UVO® Pigments are phthalate-free
#88820 DuoMatrix™ NEO is a versatile poly- or days of hand tooling and finishing. A little bit #90316 The Art of Extreme Wig Styling, by
mer-modified gypsum system which can be goes a long way! 2.88 oz each.
urethane colorants that resist UV light for Regan Cerato All the core basics that will help
cast solid, laid up by hand with chopped fiber making opaque castings. NOT for use with take your wigs to the next level, including trim-
#88816 Cast Magic Silver Bullet $6.95 silicones. ming tips, dyeing techniques, weft basics, teasing,
or sprayed. Fully cured pieces are light-weight,
strong and water resistant. Part A is powder #88817 Cast Magic Gold Finger $6.95 #88552 Silc Pig™ pigments are used for volumizing, and so much more. With the right tips
and Part B is liquid; 2A:1B mix. 6 minute pot #88818 Cast Magic Silver Bronze $6.95 tinting liquid silicone rubber. The more you and tricks, extreme wig-making can be for everyone!
life; 60 minute cure time. 3 lb. kit. $52.95 #88819 Cast Magic Pig Iron $6.95 add, the greater the effect. 9 colors. 104 pages. $24.95

#89226 Endura Primary Colors Airbrush

Makeup Set Endura is an alcohol-based,
fast-drying makeup that provides rich cover- European Body Art
age, unlimited blending and layering, no “The Blood” is the
cracking, clog-less performance and extreme Encore FX Alcohol-Based Palettes Provide most realistic
durability (sweat-proof and waterproof). Unparalleled Makeup Performance premium stage
Made with FDA approved colors, Endura is Each 10-color special effects makeup set is #87724 Smooth-On Ultimate Zombie PRO UV Face and Body Paints are skin-safe, and film blood
perfectly safe for direct skin contact and cosmetic-grade, waterproof and highly pig- KitTM gives you everything you need to quickly quick drying, long lasting, and wash off with available. Dries
prosthetic applications. Designed for airbrush mented. Doesn’t crack or transfer, goes on and easily create multiple horrifying zombie soap and water. Neon-colored in normal light completely to
application. Six color set includes white, smooth. Includes case. $74.95 each makeups like a pro, including simulated trauma and glows under blacklight ONLY – does NOT a high-gloss
yellow, red, green, blue and black. $47.95 #89038 Blood Edition scars, open wounds, burns, cuts, infections and glow in the dark! finish, giving it
Micro-Mark Pro Tip: #89039 Bruce Fuller Autopsy Edition
other gruesome FX. Kit includes Skin Tite® $5.95 ea. 3 or more $4.45 ea. the appearance of gooey, wet blood.
silicone, a strong and flexible base which can #88797 UV Pink #88801 UV White
Perfect for cosplayers, special effects #89040 Joel Harlow Contour FX Edition FDA compliant. Made in USA.
be applied directly to the skin; Thi-Vex® thick-
artists, makeup artists and more, our #89041 Skin Tone Dark with Adjusters #88800 UV Purple #88798 UV Orange #89060 10 ml vial $8.95
#89747 Self-Contained Portable ening agent; Silc Pig® Pigment; Rubber Glass®,
#89042 Skin Tone Light with Adjusters #88799 UV Red #88795 UV Green
Airbrush is an excellent choice for mixing sticks and cups; fake teeth; makeup #89045 2 oz bottle $18.95
#89043 SFX Edition palette and step-by-step DVD instructions to #88794 UV Yellow Get them
airbrushing on-the-go! $99.95 #89061 16 oz bottle $69.95
#89044 Undead Edition guide you through the process. $37.95 #88796 UV Blue while they last!

See our website for a video of this item in use 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 79
 Our Widest Selection of Glues, Cements, Applicators and Accessories Ever!

B C D E
Set includes
4 oz of
SAME STUFF
plus
Touch-
N-Flow
Applicator

F G Super Fine H J K L M Dries clear!

Regular

Does not
Fine

attack plastic!

A. Cyanoacrylates (CAs) – Instant “Super Glues” for Every Project Glue Looper is a Patented Micro Fluid Applicator
Quick Cure Zap (pink label) Thin consistency flows into the tightest joints…even when Made for Exact Glue Placement Fits any standard
parts are already clamped together. Cures in 1–5 seconds. Penetrating action acts as a hobby knife handle with a flat clamping front vise. #88400
sealer on wood. Bonds metal, plastic, wood, glass, jewelry. Includes applicator bottle. Reusable for multiple applications. $17.95/pkg.
#80875 Zap CA 1 oz $9.95 #80876 Zap CA 2 oz $14.95 #88400 V2 Glue Looper for Thin Glues, pack of 12; 3 sizes
#85243 Micro-Mark Insta-Cure CA, 2 oz $10.95 #88401 V4 Glue Looper for Thin Glues, pack of 7 #88401
Mid Cure Zap-A-Gap (green label) Best for general purpose construction and assembly.
Thicker consistency fills minor gaps and irregularities. Cures in 20 seconds. Preferred over
Quick Cure for bonding wood. Includes applicator bottle. #82031 Pin-Point Glue and Paint Dispenser Place a
#80877 Zap-A-Gap 1 oz $9.95 #80878 Zap-A-Gap 2 oz $14.95 drop of glue or paint in the mini-cup. Then dip a
toothpick or micro-brush to pick up and place a
#85244 Micro-Mark Insta-Cure +, 2 oz $10.95
pin-point size dab of glue or single stroke of paint.
Slow Cure Slo-Zap (yellow label) Extra thick consistency fills larger gaps and irregularities V-groove holds applicators and weighted metal base
and forms fillets on models. Slow, 90 second cure allows positioning time. Recommended prevents tip-over. Use with any glue or paint. Includes
for laminating, sheeting and other large surface applications. Spreads easily. Preferred 250 toothpicks and 20 mini-cups.1-1/4” diameter. $12.95
for use on balsa, basswood and other porous woods.
#80879 Slo-Zap 1 oz applicator bottle $9.95
#80880 Slo-Zap 2 oz applicator bottle $15.95
G. Microbrushes – Disposable Applicators for Exact Placement
Use a Microbrush to apply a tiny amount of liquid glue, paint or lubricant exactly where
#85245 Micro-Mark Maxi-Cure, 2 oz $10.95 you want it without spilling, dripping or staining. Non-linting, non-absorbent. Bendable
Zip Kicker Instant glue accelerator. After applying instant glue to the joint, give it a light handles. $13.95/pkg. of 100 #83168 Regular #83170 Fine #83172 Super Fine
spray of Zip Kicker and the glue will set up instantly. Also excellent for bridging gaps in
bad fitting joints and for end grain gluing. Safe for plastics. H. Chemical-Resistant Applicators for Glue, Accelerator and More
#83118 Zip Kicker 2 oz Spray $7.95 #80885 Zip Kicker 8 oz liquid $12.95 Bellows-type container with fine 20-gauge x 1-3/4” long stainless steel applicator is
#80887 Z-7 Debonder dissolves all brands of cyanoacrylate adhesives like magic! Also ideal for placing small drops/beads of glue, liquid cement, accelerator, oil, and more
removes cured residue from model parts, skin, tools, clothes, etc. Will not attack plastics. exactly where you want them. Tight-fitting cap prevents evaporation and curing inside
This odorless product is essential for correcting assembly errors, cleaning up spills and container. Applicator snaps off for refilling. Choose from 1 oz and 2 oz sizes below. Pkg.
other workbench disasters. 1 oz. applicator bottle. If you use CA glue, you need Z-7. $5.95 of 2. #60363 1 oz Applicators $6.95 #83514 2 oz Applicators $8.95
(Zip Kickers and Z-7 Debonder ship by ground to 48 contiguous U.S. only)
J. Lightning Bond Industrial Strength Adhesive & Filler
High-tech adhesive bonds similar and dissimilar materials to each other with unbeatable
B. – C. Precision Applicators for Glue and Accelerator strength. When used with the included filler, the bond is so strong it can be machined
Simply touch the tip to the object to transfer the glue with precision control, eliminating immediately after curing. Use to bond and repair everything except paper, cloth, Teflon,
blobs and other mishaps. Also applies accelerator without messy sprays and harmful vapors. Delrin, polyethylene/polypropylene. 20 g bottles. #88713 Lightning Bond Set $24.95
B. #81669 Mini Glue Applicator. Holds a single drop of glue or accelerator in the loop at
its tip. All Stainless steel. Approx. 6” long. $8.95 K. Ready-to-Use Scenery Cement Holds Securely, Stays Flexible
C. #82448 Micro Glue Applicator. Holds a miniscule drop of glue or accelerator in the Add ballast, turf and grass to your layout or diorama, then apply our ready-to-use Scenery
forked stainless steel tip. Nickel ferrule and wood handle. 7” long. $9.95 Cement straight from the bottle to hold it in place. The included dispenser cap makes
application easy and fast. Dries invisible, but remains flexible. Water-based for easy cleanup.
D. “Touch-N-Flow” Precision Applicator #85043 Scenery and Ballast Cement (16 fluid oz) $8.95 2 or more $7.95 each
The Touch-N-Flow Applicator lets you apply just the amount of liquid plastic cement
(solvent type) or C/A accelerator you need. How it works: Capillary action draws liquid L. Detail Tack – Repositionable Glue for Model Figures & More
into the glass tube. Touching the micro-tip to the joint causes the liquid to flow from the Special formula dries clear, but remains tacky so that figures and details can be easily
tube. Application is easily controlled and precisely positioned. Note: not for use with repositioned. #84774 Detail Tack (2 oz) $9.95
cyanoacrylates or other thick glues. #81778 Touch-N-Flow Applicator $10.95
M. Liquid PSA* Eliminates Glue Drips, Runs and Smears
E. SAME STUFF Liquid Plastic Welder Perfect for models with intricate trim, window glazing and signs. Just apply a thin coat
Solvent-type cement welds styrene, acrylic, butyrate and ABS plastic. To apply, place to the surface to be joined. It will quickly dry and turn clear, but remains tacky. Then,
the parts together and then put a drop on the seam with the included Touch-N-Flow simply press together. Since the glue is dry, nothing oozes out to ruin the finish of an
applicator (described above). Hold for 15 seconds. In that amount of time, SAME STUFF otherwise perfect model. Parts go together quickly and are repositionable. Washes off
bonds and starts to cure. This method is far superior to thicker plastic cement which is with water until dry. #84775 Liquid PSA (4 oz) $16.95 *Pressure Sensitive Adhesive
messy, harder to control and can damage expensive model kits.
#84131 SAME STUFF with Touch-N-Flow Applicator. Value $22.85 . . . Our Price $19.95 N. Watch Crystal Cement for Clear Contoured Plastic
#84113 SAME STUFF Refill (2 oz) $7.95 Special cement dries crystal clear and won’t attack plastic, making it ideal for cementing
plastic canopies and windshields on airplane and car models. Special needle-point
F. Extra Applicator Caps for Micro-Mark CA Bottles applicator tip makes precise placement easy. Wire-in-cap keeps applicator free flowing.
Replace worn or clogged caps to like-new condition. Fits most screw-on CA applicator Cures to the touch in 15 minutes; uncured cement cleans up easily with ordinary rubbing
bottles. Package of 24. #85823 Applicator Caps $11.95 alcohol. Two 1/3 oz tubes. Ships by ground to 48 contiguous U.S. only. #80343 Crystal Cement $9.95

80 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 Follow us on SUPPLIES HAND TOOLS POWER TOOLS
NEW from the For Micro-Precision Glue Application, Nothing HobbyTrayz TM Modeling Base
Master Modelers at Beats the Diamond PRO Micropipettor
Acrylicos Vallejo If you have ever over-glued a model kit with a toothpick or
#89952 Vallejo Plastic Putty glue bottle applicator, this revolutionary new modeling tool
This 100% acrylic, water-soluble will cure that frustration. Whether gluing hard-to-reach
modeling putty dries to a hard, areas or the smallest of parts, this Diamond Pro Pipette is
opaque white finish. Not only the Cadillac of glue applicators. Originally designed for
ideal for plastic, resin, wood scientific applications, this magnificent precision tool
and metal models and minia- operates on the air displacement principle and uses
tures, this putty is an excellent disposable tips. Draw in only the amount of glue you
medium for creating a wide wish to apply and slowly distribute to your part or
variety of textures and reliefs. seam with the easy-to-use control dial and plunger.
20 ml / 0.67 oz tube. $9.95 Pipette works with all consistency of CA glues.
Includes certificate of calibration, a recalibration #88163 HobbyTrayz TM is an excellent
Plasti-Zap The best CA for tool kit and a full one year manufacturer’s portable work station for model assembly,
assembling plastic model kits. warranty. Take your modeling to the next supply storage and organization, Hobby-
Cuts through plastic mold level with this ultimate gluing system. Trayz TM is also perfect for the construction,
release agents and will not #88842 Diamond Pro Micropipettor maintenance and repair of smaller r/c cars,
chemically attack or List $230.00 . . . Our Price $199.95 slot cars, drones, trains, miniature figures
soften plastic parts. and much more! Use it to organize, protect
Medium viscosity, #88841 Pipette Tips, 50 Pack $8.95
#88992 Track Maker Assembly Jig for and enhance your workspace with features
non-flammable including a 12” x 9” work area; recessed
formula cures clear Tank Track Links. Adjusts from 0 to 30 mm
(1-3/16”) wide. $57.95 trays for paints, glues and thinners; glue
in 15 – 30 seconds tube pocket; instruction stand; paint brush
and is sandable rests; molded-in transport handles; under-
and paintable. Can mat small tool storage and organizer; even
be removed from
plastic parts with For Square and True includes a handy 12” x 9” cutting mat.
20” x 16” footprint. Made in USA. $49.95
Debonder. Assembly and Repair –
#80881 Plasti-Zap CA, .33 oz $5.45 and for Holding Items 1,000 Micro Screws…
#88761 Plasti-Zap Brush-On, .25 oz $3.95 Clamps Can’t Grasp – 1,001 Uses
#84368 Zap Goo is an Nothing Beats Our
all-purpose adhesive and Magnetic Gluing Jig
sealant. Not a super glue.
One of our all-time favorite items, the
Bonds virtually anything
Magnetic Gluing Jig is an essential
to anything. Gooey,
tool in the shop, in the studio,
strong, clear and remains
in the home…everywhere!
flexible. For porous and
non-porous surfaces.
1 oz tube. $4.95
#83438 1,000-piece Metric Micro Screw
Assortment Set of approx. 100 each of 10
micro sizes includes a random selection of
screws ranging in size from 1 mm to 5 mm
long, .5 mm to 1.5 mm in diameter, with
assorted head styles. Segmented wheel
with selector-slot keeps screws organized.
Woodworkers, model builders, DIYers and crafters rely on it every day for joining and Great for a wide range of projects. $24.95
holding components perfectly square and true while glue dries, and for holding together
and gluing oddly-shaped items on which ordinary clamps would never work. Its beauty Mini Extractors to the Rescue!
is in its simplicity. 8 powerful magnets sandwiched between a fixed plate and a removable/
repositionable plate allow you to place the magnets’ strong holding force just where you
need it on the 10-1/4” x 10-1/4”, 21 gauge steel jig plate. The plate’s 7/8” flanges are bent
up at a 90° angle to hold items squarely and securely. Open ends allow long, thin wood
pieces to extend outside the jig if needed. Includes 8 magnetic holding plates.
#60304 Magnetic Gluing Jig $29.95 #60305 Extra Magnetic Plates (8) $12.95

#80888 5-Minute Quick Cure Z-Poxy is Store Your Glues and Tools the Micro-Mark Way
specially formulated to bond wood, metals, Designed in-house and manufactured
plastics, fiberglass and more. Shock and in our own U.S. factory, this elegant
solvent-resistant Z-Poxy is non-shrinking laser-cut wood rack is
and is great for gap-filling. Produces a custom-made to hold
tough, permanent bond in just 5 minutes. our SameStuff Plastic
Two-part system; mix equal quantities of Welder and applicator,
A & B. Two bottles, 8 fl. oz total. $17.45 along with 1 and 2
ounce oval-shaped and When a micro screw breaks off, don’t panic!
#83655 Zap-O round super glue The specially-formed tips of our screw-
Foam-Safe Odorless bottles, plus 10 driver-like Mini Extractors engage fractured
CA Glue has the same extra spaces for screw ends so they can be backed out of
gap filling properties as hobby knives, the hole. Set of 6 double-ended chrome-
Zap-A-Gap CA+ but applicators vanadium bits includes 8 extractors (.039” to
without the fumes. paint brushes, .079” dia. and 4 screwdriver tips (Phillips
Works great on a wide pencils and #00 and #0 plus flat blades .070” and .086”
range of materials and more! 9-3/4” wide). Anodized knurled aluminum handles
for gluing foam shapes long x 4-1/4” include polymer swivel caps, stainless
and various materials to deep; 2-7/8” pocket clips and spring-steel bit retainers.
foam products. Medium high. Makes a perfect Made in the USA by Moody Tools; backed
thick formula cures in companion to our #88700 by an unconditional life-time warranty.
15 seconds. 0.7 oz/20 g MicroLux® Paint Rack. Assembly required. #83475 Mini Screw Extractor /
bottle. $14.95 Glues and tools sold separately. #88879 MicroLux® Gluing Station $17.95 Screwdriver Set $49.95

See our website for a video of this item in use 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 81
 HAND TOOLS
Magnetic Clamps are Perfect for Model Structure Assembly F
This paired set of Proses Snap & Glue
10 Pack!
Magnetic Clamps is an indispensable
tool for assembling precise 90˚ angles
on laser-cut parts, scratch-built items
and more, including woodworking and
craft projects. Simply pull a pair of
magnets apart, place inside and outside
your 90˚ corner, snap into place and
A
apply glue to your now perfectly-
aligned right angle! Set includes four
two-piece magnetic clamps (each with B
four magnets), and instructions. Use for
N, HO and S scales. Glue sold separately.
#89132 Proses Snap & Glue Magnetic
Clamp Set
G
List $75.00 . . . Our Price $49.95

Build it Better with the “Right Clamp”

Parts held by Right Clamp’s thumbscrew adjustable
foam-lined jaws are held gently, yet securely at a
C
perfect 90˚ right angle to each other. A slot in the
clamp’s rear frame lets you apply glue to parts while
they’re being held in the clamp, ensuring parts won’t
move out of position before the glue sets. Overall H
length: 3”. Clamping surface: 1-1/2” long x 3/8” wide
(2 places).
#83044 Original Right Clamp $36.95
#86847 Mini Right Clamp includes the same great
#83044 features as the Original Right Clamp above in a
smaller size. Overall length: 1-7/8”. Clamping surface:
1” long x 1/4” wide (2 places). $31.95 D
E
A. You Can’t Have Too Many Clamps…
Especially at Such a Great Price!
Ideal size for model building and other miniature projects. Converts in seconds to a spreader
by relocating the fixed jaw to the opposite end of the bar. Capacity: clamp 0 to 4”; spread 3”
to 7-1/2". Made of steel and engineering polymer, with removable, serrated, no-mar pads.
#83265 #85421 Trigger Action Reversible Bar Clamp (package of 10) $34.95
Long Right Clamp
Overall length: 4-3/16”. B. Jeweler’s Micro-Vise for Hard-to-Hold Round Items
#83541 Splice Clamp is perfect for
Clamping surface: This micro-vise is perfect for holding small round items while drilling, filing, grinding or
end-to-end gluing. Overall length: 3”.
2-3/4” long x 3/8” wide performing other operations. Four double-sided surfaces provide 8 gripping edges
Clamping surface: 1-1/2” long
(2 places). $36.95 specially formed to hold diameters from 1/2” to 1-3/8”. The knurled thumbscrew applies
x 3/8” wide (2 places). $36.95
just the right amount of gripping force necessary to hold objects securely without
Combo Right Clamp Is Great for Soldering and Assembly Work damaging them. Made of plated brass. #81495 Micro-Vise $16.95

C. Extra Strong, Extra Comfortable Spring Loaded Clamps

The perfect size spring-type clamps for all types of miniature work, especially for the model
builder and dollhouse miniaturist. Vinyl grip handles make them extra comfortable to use.
Vinyl covered jaws hold stock securely and won’t mar wood or other delicate material.
5/8” capacity, 2” long overall. Set of 8 clamps.
#85168 Long Combo Right Clamp has a contoured aluminum
#81839 2” Spring Clamps (Set of 8) $7.95
main frame with built-in access notches to facilitate gluing and
soldering, and grooves for holding metal shapes securely. Features
an extended base for use in a vise. Overall length: 4-7/8”. Clamping D. – E. Mini Model Builder’s Clamps
surface: 2-3/4” long x 3/8” wide (2 places). Jaws open 3/8”. $52.95 Lightweight plastic clamps with one fixed jaw and one adjustable jaw. To use, slide
adjustable jaw up to workpiece and press tapered locking wedge to hold. Available in
#86846 Mini Combo Right Clamp includes the same great features 2 sizes. Sold in a set of 2 clamps.
as the Long Combo Right Clamp above in a smaller size. Overall D. #80323 7” capacity (2) $11.95 • E. #60930 3” capacity (2) $8.95
length: 2-1/4”. Clamping surface: 1” long x 1/4” wide (2 places). Jaws
#80383 Set of 4: 2 each, 3” and 7”. List $20.90 . . . Our Price $16.95
#85168
open 5/16”. $39.95
F. – G. Special Spring Clamps for Model Builders
Magnetic F. #60929 Aluminum clamp with steel spring. 2-1/2” long with 1/4” capacity. Jaws are
Tool Holder designed to hold odd or irregular shapes as well as flat, smooth shapes. All metal
construction makes them ideal for holding parts together while soldering. Can also be
for Up-Front used as a heat sink. Set of 5. $10.95 2 or more sets $8.90/set
Storage of G. #60928 Nickel plated steel clamps with vinyl coated cushion grips. 1-3/8” long with
Small Tools 3/16” capacity. Ideal for holding small, flat objects and for keeping ship model rigging
lines taut during assembly. Set of 5. $14.95 2 or more sets $11.60/set
Tools not
included.
H. Vise-Grip® Locking Pliers in Miniature Sizes
These small, lock grip pliers are perfect for all types of miniature work. They’re fully
20” long magnetic tool holder keeps small tools handy, visible and within easy reach. adjustable and hold fragile items securely without crushing and the long nose pliers will
Mounts easily to wall or shelf edge with 2 wood screws (included). Has double row of get into tight spots like no other lock jaw pliers can.
magnets for extra strength. #60458 Magnetic Tool Holder $16.95 #14565 Curved jaw with wire cutter, 4-1/2” long. 1” capacity. $19.95
#14564 Long nose with wire cutter, 5-1/2” long. 1-1/2” capacity. $24.95

82 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 Follow us on HAND TOOLS
L
K
J

P
Handle and lock knob vary.
R

M N

Beware of
S Cheap Imitations!

T Clamp not included

U V

J. Cross-Locking Clamps for Ship Modeling R. Spreading Plier

and Miniature Work Working with a large producer of quality pliers, we designed the body, handles and jaw
Miniature spring clamps hold small objects tightly together while soldering, gluing or tips of this spreading plier to provide more comfort and durability with easy spring return
positioning. The weight is just right for keeping ship model rigging lines taut while action. Hefty handles fit perfectly in the palm of your hand for delicate control and
glue dries. 2-1/4” long, 1/4” capacity. Smooth jaws won’t leave marks. Six per package. maximum gripping power. The further down the jaw material is placed, the more force
that can be applied to your spreading action. Lifetime warranty against manufacturing
#60903 Cross-Locking Clamps (6 per pkg.) $14.95 2 or more pkgs. $12.95/pkg.
defects. When fully opened the stepped tips spread to 7/8” and the lowest notch spreads
to nearly 3/4”. #87935 Micro-Mark Spreading Plier. List $26.95 . . . Our Price $22.95
K. Super Hand Vise
Six grooves cut into the jaw surfaces let you securely position and hold wire while you
shape and assemble. Useful for holding other metal, plastic and wood shapes as well.
S. 90° Angle Jig Builds Projects Square and True
Turning the hardwood handle tightens the steel jaws. Hole through handle lets you hold If you assemble models or miniatures over a building board, you’ll wonder how you got
long stock. along without this unique tool. How it works: Just position the 90° aluminum angle next
to the item you want to hold. Then press the push pin through the hole in the angle and
#85139 Super Hand Vise $20.95
into the building board. Place the item against the vertical face of the angle and hold in
place with the mini clamp. Designed specifically for holding wing ribs during model air-
L. Miniature Spring Clamps for Small Assemblies plane wing assembly. They’re also ideal for dollhouse furniture, ship model bulkheads and
2-1/4” long clamps with strong springs hold securely while glue dries. Pivot tips adjust to anytime you need to hold a part at 90° over a building board. Set includes six 1” x 1” x 1”
match surfaces being clamped. Molded in 6 neon colors for identification…one even has aluminum angles, six push pins and six stainless steel smooth jaw spring clamps.
a key ring. 3/4” capacity with textured sure-grip handles. #80344 90° Angle Jigs (Set of 6) $20.95 2 or more sets $19.50 ea.
#82780 6-piece Hobby Clamp Set $9.95

The More Clamps, the Better! T. Toolmaker’s Angle Plate Holds Work at a Perfect 90° Angle
#82979 Bag of 50 Mini Clamps Contains 50 of the same type of colorful spring clamps Use these hard-to-find tools whenever you want to join or hold two parts edge-to-edge
above at a bargain price. $22.95 or edge-to-surface at a 90° angle. Also used to square up table saw, drill press or disk
sander tables. Precision cast with machined faces and edges.
#84984 Bucket of 100 Mini Clamps Best Buy! $34.95
#60713 1” x 1” x 1” $13.95
#60714 Set of All Three Angle Plates
M. – N. Stainless Steel Mini Clamps Hold Where Others Can’t #20123 2” x 2” x 2” $21.95
(one of each size) List $62.85 $49.95 SAVE!
Our spring-loaded mini clamps are ideal for all types of small applications. Jaws may be #60626 3” x 3” x 3” $26.95
filed or ground to any shape. Especially good for soldering since solder won’t stick.
M. #14532 Smooth Jaw. 1/2” wide, 5/16” capacity. Set of six. $9.95 U. Solid Brass Miniature Bar Clamps
The best clamps you can own for clamping small wooden boxes, dollhouse miniatures,
N. #14533X2 “Alligator” Jaw. 3/8” wide, 3/8” capacity. Set of 12. $11.95
model railroad structures and rolling stock, ship models, model airplanes, clock kits, and
more. Beautifully made of solid brass at an unbeatable price.
P. Mini 4-Corner Clamps Speed Assembly #14256 12” long bar clamps, approx. 10-1/2” clamping capacity. Set of 2. $24.95
Great for clamping miniature picture frames, furniture, model railroad rolling stock and
structures, ship models and whenever you need to clamp 4 corners tightly together. They #60103 7” long bar clamps, approx. 6” clamping capacity. Set of 2. $24.95
adjust easily to hold items from 1/2” x 1/2” to 5” x 5”. #14257 4-3/4” long bar clamps, approx. 3-3/4” clamping capacity. Set of 2. $24.95
#60716 Mini 4-Corner Clamp $19.95 2 or more $17.95 ea. #60396 Ultra-mini brass bar clamps with knurled tightening screws for delicate
control. 3-3/4” long, approximately 3” clamping capacity. Set of 2. $24.95
Q. Universal Clamp Holds the Oddest Shapes
This ingenious tool is used to hold small and odd-shaped parts for engraving, carving, V. Use Vacuum Power for Hard-to-Hold Parts
sawing, filing, sharpening, etc. The four steel pins adjust to 60 different positions to hold Unique tool uses vacuum power to hold and position small parts. Simply press the button
the most irregular shapes. 2”diameter solid aluminum head with steel guide pins and screw. on the 6” handle to create suction. Then, press again to release. Includes two rotatable
Handle can be removed for locking the head in a bench vise. 5-3/4” long overall. extension tips (straight and angled), four rubber suction tips (1/8”, 1/4”, 3/8”, and 1/2” dia.),
#21129 Universal Clamp. List $38.95 . . . Our Price $24.95 and a convenient pocket clip. #82304 Hobby Pal Deluxe Vacuum Tool $19.95

See our website for a video of this item in use 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 83
 NEW ITEMS HAND TOOLS SUPPLIES
Make Your Own Decals the Easy, Inexpensive Way The Professional
Create your own railroad names, logos, stripes, road racing emblems, stained Way to Decal
glass windows, signs, aircraft and military markings and other custom art-
work faster and at a fraction of the cost of custom decal services. Copy any
pre-printed design, use any computer drawing program, or create your own
artwork with ink and paper. Then, print out your artwork onto the blank
decal paper using a computer printer or copy machine. Our decal paper
works like any other water-slide decal. Just cut out the decal, dip in water,
and slide it into place on your project. Use clear decal film for most lettering
and graphics; use white decal film when white is needed as a background
color. Each sheet of decal paper is 8-1/2” x 11”. Complete instructions included.
Note: Decal Papers have been tested in most brands of printers, but the user
must determine compatibility with his or her own equipment.
#89670 Micro-Mark Decal Application
See our website for more information, instructions, and a video demo on Station This handy desktop tool makes it
producing and applying your own decals using Micro-Mark products. neat and easy to apply decals by keeping
Inkjet Printer Clear Decal Paper on white backing Inkjet Printer White Decal Paper on white backing Laser Printer Clear Decal Paper on blue backing everything contained in one compact,
#82272 #82273 #82274 #82277 #82278 #82279 #82370 #82371 #82372 convenient place. Just pour some water
5 sheets $9.95 25 sheets $42.95 100 sheets $134.95 5 sheets $9.95 25 sheets $42.95 100 sheets $134.95 5 sheets $9.95 25 sheets $42.95 100 sheets $134.95 into the bottom well, then use the built-in
handle to lower the platform and dip the
Note: All decal printing requires a fixative spray to protect printed material from water damage in the application process. See below. included foam sponge in the water. Raise
the platform and place your decal on the
#82858 Fixative Spray A clear glossy acrylic that keeps inkjet- and laser- #82859 Inkjet Try-it Pack Includes one moistened sponge until the carrier releases,
printed images from smearing or washing off. 6 oz spray can. Not for each clear/white and white/white inkjet then slide the decal into place on your
Alps (ships by ground to 48 contiguous U.S. only). $7.95 decal paper sheets, plus one spray can of workpiece. Also includes a handy non-
glossy acrylic fixative (ships by ground to marring plastic tweezer that stores behind
#82463 Testors Flat-Finish Spray Coating/Fixative formerly called
48 contiguous U.S. only). $14.95 the handle and non-slip rubber foot pads
Dullcote; protects all printed images. 3 oz (ships by ground only). $6.45
to keep the station from sliding while you
Decal Finishing System is the “Solution” for Perfect Decaling #85847 Decal Fix by Acrylicos work. Takes up only 7” x 3-1/2” (x 2” tall) of
Vallejo is a dull-finish clear space on your workbench. $14.95
Decal application can make or break an otherwise
acrylic coating specially
flawless model. Put decals on properly, and they
become one with the surface of your model for
formulated to hide the edges GRAFFITI IT!
of decal film. Apply with a
ultimate realism; put them on wrong, and your
brush after the decal has dried.
model is ruined. Give yourself the professional’s
Set of two 17 ml (1/2 oz)
advantage with our Decal Finishing System. Made
Without dropper-top bottles
by Microscale Industries, this Micro-Mark Exclusive
(1 oz total). $8.95
Set includes one ounce each of: Micro Set, to soften
decals and improve adhesion or to remove decals;
Micro Sol, to “melt” decal film onto irregular surfaces; #86891 Scale Motorsport
plus Micro Flat, Micro Satin and Micro Gloss non- Decal Magic Setting
yellowing, water-based top coats for that perfect Solution is biodegradable,
final finish. See our website for individual refills. non-toxic, and won’t harm
With painted surfaces. 1 ounce
#88676 Decal Finishing System $24.95 wide-mouth, no-tip jar.
$6.95
#86791 Inkjet Decal-Making Super Value Package includes: Clear Inkjet Decal Paper
(5 Sheets), Glossy Lacquer Fixative Spray (3 oz), Squizzers, Decal Scissors, 2 Sponge Squizzers…Perfect for Decals
Applicators, Flat/Smooth Decal Tweezers, Decal Finishing System, Palette, Golden
Eagle Paint Brush (#4, Flat) See website for full details Value $78.85 . . . Super Buy $59.95 #88568 Micro-Mark Graffiti Decal Set
Colorful, bold graffiti is part of the modern
landscape and adds that extra level of
Add Raised (3D) Rivet Heads and Other Details to realism to your models and scenery. Our
Any Surface…Easily, Quickly and Economically! unique, custom designed Graffiti Decal Set
provides an impressive array of 32 different
designs and 3 different sizes – 194
individual decals in all – spread over four
8-1/2” x 11” sheets of our clear waterslide
decal paper. Decals are provided ready-to-
use, so all you have to do is snip, dip and
slip into place on your model! Includes
These precision surgical scissors will cut out instructions. Use for any scale. $24.95
decals cleaner and closer than anything else
you’ve ever tried.
#81204 Squizzers $26.95

Decal Blotter
We’ve developed a way to produce realistic scale-size rivet heads and other surface details,
3-dimensioned and contoured, on the surface of our blank decal paper. To use, simply
cut out and apply like any other water-slide decal...it’s that easy! Apply to virtually any
material under or over paint. Each package contains over 108 square inches (2 BIG decal
sheets) of several different rivet patterns in both straight lines and curves, plus bonus
louvers and grillwork. Although described below as for HO or O scales (typically for model #85821 Decal Blotter Sponge tip gently
railroad applications), they are useful across numerous scales. Made in the USA. blots away excess water and helps position #29100 Tamiya Panel Line Accent Color
#84985 HO Scale Rivet Decals $17.95 #84987 O Scale Rivet Decals $17.95 decals without damage. Set of 2. $10.95 gives scribed panel lines and recesses a
more realistic appearance of depth. This
#84781 Adhesive Transfer Tape Clear acrylic, Decal Tweezer pre-mixed black enamel paint is diluted to
reverse wound, pressure-sensitive adhesive on the ideal viscosity for easy application
a densified kraft paper liner. Apply, then peel with the included bottle cap brush. Once
off the liner to leave only the adhesive on the dried, any excess may be cleaned
surface. Bonds a wide variety of similar and Decal Tweezer for perfect decal placement. up with enamel thinner.
dissimilar materials with no mess or clean up. Stainless steel. 4-1/2” long. #60907 $8.95 Sold in a case of six
One 36 yard roll, 3/4” x 2.0 mil thick. $14.95 #88588 Titanium Plated $12.95 40 ml bottles. $42.95

84 • ORDER TOLL FREE 1-800-225-1066 • OUTSIDE USA CALL 1-908-464-2984 See our website for a video of this item in use
 MICRO-MAKETM SUPPLIES HAND TOOLS Follow us on
Tamiya “Work Stand” Turns Any Table Top into a Micro
Complete Model Builder’s Workstation...Instantly! Sprue Cutting
The 12 x 18 inch work surface incorporates a well for decal water and a holder
for paint brushes, plus storage space for paint bottles, glue and more. The fully Plier
adjustable overhead arm is equipped with 6 brilliant LEDs and a large 2x magnifier
to provide extraordinary viewing of your model during construction and finishing.
Optional spring clips (our #83828) fit into slots in the base to hold parts during
assembly and painting. Work surface can be fitted with a cutting mat (sold below).
Convenient carry handles let you clear the table without disturbing your work-in-
progress. Made of sturdy engineering polymers with a crystal-clear acrylic lens and
ON-OFF switch for lamp. Includes rubber feet to protect table surface.
#83827 Tamiya Work Stand. List $160.00 . . . Our Price $139.95
Base size: 17” wide x 14-1/2” deep. Nominal overall height: 12”. Magnifier size: 6” wide x Micro-Mark Modeler’s Micro Sprue Cutting
4“ deep. Battery for lamp (4 D-cells), cutting mat, tools, model and supplies not included. Plier is the perhaps the most versatile tool
Optional Accessories you will find for removing plastic parts
#36133 8-1/2” x 12” Self-Healing Cutting Mat $21.95 from their trees. Low 10-degree cutting
angle makes the cleanest flush cuts, even
#83828 Spring clip part holders (Pkg. of 8) $14.95
in the tightest locations. Super-sharp, ultra-
thin blades minimize parts breakage and
Tri-Edge Tweezer -Like Nipper Plastic Modeler’s Essential shear the most delicate sprues with zero
Seam Desprues the Tiniest Tool Set Super Value Package distortion and stress-free cutting action.
Unique stop-pin limits opening action as
Scraping Parts desired and spring return handles have the
Tool just-right feel of a finely-tuned instrument.
Durable blades have a hardened cutting
edge. For plastic sprues only.
#88288 Micro Sprue Cutting Plier $24.95

Fujiya Cutting Pliers

Are Like Samurai Swords
A gentle squeeze is all that’s
for Plastic and Wire
required to safely separate even the
tiniest molded part from its sprue. Finely-
There are others available, but this is the ground double-honed tips reach into the
only one we’ve tested that really works! tightest locations and flush cut the plastic
No other tool smooths glue seams or so that further clean-up is not required.
removes parting lines and flash better Custom made for Micro-Mark of the
than our Tri-Edge Seam Scraping Tool. The highest-quality satin-finish stainless steel.
3 super-sharp cutting edges are precision For use on plastic sprues only.
ground tool steel. The scraper is held
#82393 Despruing Tweezer $19.95 #87609
firmly in the finely contoured lacquered
handle. Has a 3” long tapered tip scraper Make your plastic models spectacular with
blade and 4” long handle. Also deburrs Professional Sprue this essential set of finishing items.
aluminum, brass and other soft metals.
Cutter from Xuron Set includes: #86325 Soft Touch Model Mat Protective #87626
#89334 Tri-Edge Seam Scraper $15.95 Pad • #84131 Same Stuff Plastic Welder (4 oz) with
Touch-N-Flow Applicator • #89334 Tri-Edge Seam
Special Chisels Easily Remove Scraper • #82393 Tweezer Sprue Cutter/Despruing Through our exclusive partnership with
Unwanted Plastic Details Tweezer • #60728 Panel Scriber for Plastic Models Fujiya of Japan, Micro-Mark is proud to
• #86128 Dual Angle Sanding File Set • #84386 offer these exquisite cutting pliers for the
Professional Sprue Cutter • #89952 Vallejo Plastic Putty first time in the USA. Backed by over 90
(20 ml / 0.67 fl. oz) • #60897 Long Flexible Putty Knife. years of exceptional craftsmanship, these
tools are hand-finished and honed to
#86786 Plastic Modeler’s Essential Tool perfection by skilled technicians. Fujiya
Set Super Value Package tools are inspected for flawless alignment
This special Value $156.80 Super Buy $99.95 prior to packaging.
flush-cutting
plier from #87609 13˚ Super-Sharp Sprue Cutter
Xuron makes
Panel Scriber for Surgically clean slicing action glides
Available in it easy to Plastic Models through sprues with virtually zero stress,
4 mm & 2 mm remove leaving the cleanest parts we’ve ever seen.
widths molded parts Use for plastic sprues ONLY up to 3/16”
from sprues diameter. List $29.95 . . . Our Price $25.95
with professional results. Finely ground, Double-Ended #87626 25˚ Sprue Cutter Not only does
Upgrade plastic models by removing
unsightly, out-of-scale molded-in details heat-treated tips nip-off large parts for Twice the Life! this cutter make amazing cuts in plastic
with ease, yet are delicate enough to like the 13˚ cutter, we’ve also found it to
sometimes included by manufacturers.
release small parts without damage. be the best soft wire cutter on the market
The hand-ground cutting edge easily
Includes contoured grips so you can for 30 to 14 gauge wire! (.010” to .064” or
removes unwanted details and the sturdy, Use for making realistic-looking recessed
work for hours without cramped fingers. 1/16”). List $29.95 . . . Our Price $24.95
non-slip handle gives you precise control panel lines on models. Other scribers just
over cutting force. Made exclusively for For use on plastic only. move the plastic so you get a mound on #90034 Tamiya White Modeling
Micro-Mark of polished, surgical-quality #84386 Professional Sprue Cutter the side of the line like a plowed field. Putty Praised by modelers for its
stainless steel, these chisels are also useful List $28.00 . . . Our Price $22.95 Ours actually removes a thin hair of plastic high quality and ease of use, Tamiya’s
for mini woodworking projects. Approx. without distorting the plastic. Made of white-colored putty fills holes and
6-1/2” long. Note: The outer edges of the chisels may stainless steel with a knurled no-slip
be rounded slightly with fine sandpaper or a honing stone
Cut Plastic Faster, handle. Has scribers on both ends so it
seam lines, can be used on plastic,
wood, or metal; and can also be diluted
to prevent gouging of surfaces in surrounding areas. Cleaner, Safer will last twice as long. Will work equally with lacquer thinner for a wide range
#80893 Plastic Modeler’s Chisel, as well on half-hard brass and aluminum. of applications. Each aluminum tube
#82131 1/4” dia. x 6” long.
4 mm wide cutting edge $21.95 contains 1 oz (32 grams) of putty.
Plasticutter $6.95
#82709 “Tight Spot” Plastic Modeler’s
2 or more $5.95 ea.
#60728 Panel Scriber Set of two 1 oz tubes. $12.95
Chisel, 2 mm wide cutting edge $21.95 List $24.50 . . . Our Price $16.95 Ships by ground to 48 contiguous U.S. only.

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 85
 NEW ITEMS MODEL KITS
This is just a sampling of our wide selection of model kits, collectibles and more – See them all at micromark.com

#90478 Tamiya Team #89936 #90276 #89935

Suzuki ECSTAR GSX-RR ‘20 Revell® Ford FD100 Pickup Revell ‘30 Ford® Model A AMT 1961 Chevy Impala™ SS #89834 MT 1955 Chevy
Plastic model kit, 1/12 scale. Plastic model kit, 1/25 scale. Coupe Plastic model kit, Plastic model kit, 1/25 scale. Nomad Wagon Plastic
$61.95 $24.95 1/24 scale. $29.95 $24.95 model kit, 1/16 scale. $41.95

#89980 Italeri® Vespa 125

“Primavera”
Scooter

#89979 Italeri® Alfa Romeo #90018 AMT

8C/2300 (1931-1933) 110th #90030 AMT® 1957 Ford #90029 MPC® ‘36 Wild One Hot Wheels™ Race Team Ford
Plastic model kit, Anniversary Edition Plastic Thunderbird Plastic model kit, Modified Plastic model kit, Monster Truck Plastic model
1/9 scale. $79.95 model kit, 1/12 scale. $279.95 1/16 scale. $39.95 1/25 scale. $24.95 kit, 1/25 scale. $31.95

#89373
Atlantis®
Tom Daniel
King Chopper Trike
Plastic model kit,
1/8 scale.
$50.95

#90481 Atlantis® Tom Daniel #89850 Atlantis® Tom Daniel #89849 Atlantis® Tom Daniel
“Son Of Troublemaker” Plastic Unreal Roller Plastic model kit, “Groovy Grader” Plastic model #88951 Hand-signed book
model kit, 1/24 scale. $29.95 1/24 scale. $26.95 kit, 1/24 scale. $29.95 by Tom Daniel. $31.95

#90089 #90324 Atlantis®

Moebius Models® #89515 Polar Lights® #90090 Mooneyes™ #90314 Bandai Spirits
Von Franco’s “Stoned Hoods Scooby Doo Mystery Machine AMT® 1957 Chevy Bel Air Dragster “Batman Begins” Batmobile
& Crooks” Plastic model kit, Plastic “snap” model kit, Plastic model kit, 1/25 scale. Plastic model kit, Plastic model kit, 1/35 scale.
1/25 scale. $31.95 1/25 scale. $23.95 $20.95 1/25 scale. $29.95 44.95

#89549 Metal Earth®

#89722 Freight Train Set
TimeForMachine Metal model kit. Includes
#90255 Airfix® “One Small #90031 Red Iron Models #89460 OWIKIT VROOM Chrome Rider Stainless 5 train cars. No glue or solder
Step for Man” Diorama Plastic Sputnik-1 Satellite Plastic STEM V8 Combustion Engine steel mechanical model kit. required. 17” long when
model kit, 1/72 scale. $39.95 model kit, 1/24 scale. $24.95 Plastic model kit. $69.95 6” х 2.25” х 3”. $81.95 assembled. $34.95

#89896 #89490
Robotime® Robotime®
Vitascope T-Rex
Mechanical
Movie
Projector

Wooden
Wooden kinetic #89719 Wooden.City® Buggy
kinetic #89895 Robotime® Triplane model Wooden kinetic model kit. #89892 Robotime® Cathy’s
model kit. Modern 3D wooden kinetic kit. No glue required. Approximate Flower House DIY Miniature
$49.95 model kit. $13.95 $41.95 assembly time: 2 hours. $27.95 Dollhouse Kit. $39.95

86 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 MODEL KITS Follow us on NEW ITEMS
See additional kits throughout this catalog and watch our website for a constant stream of NEW model kits, collectibles & more!
#90268 #90325 #90333 #89748 #90173
Iron Studios Iron Studios Iron Studios Blitzway Iron Studios
Bugs Bunny “Venom: Carnage “Marilyn Monroe” Elvis Presley
“Space Jam: Let There Be “Venom: Superb Scale “Comeback”
A New Legacy” Carnage” Let There Be statue Deluxe
Art Scale Art Scale Carnage” (1/4 scale). Art Scale
collectible collectible Art Scale $474.95 collectible
figure, figure collectible figure
1/10 scale. (1/10 scale). figure (1/10 scale).
$119.95 $199.95 (1/10 scale). $169.95
$199.95

#90480 #89641
Bandai Spirits Marvel
DX Chogokin Heavyweights
VF-25 Messiah Captain
Valkyrie America
#90023 Worldwide Full cast
#90087 Flame Toys Anniversary metal figurine,
Bandai Furai Model “Macross 1/18 scale.
#90450 Kotobukiya® Spirits “Windblade” Frontier” $50.95
Hexa Gear Sieg Springer Mobile Suit Transformers Fighter
Plastic model kit, 1/24 scale. Gundam Wing Plastic model Collectible
$44.95 Plastic model kit. $25.95 kit. $48.95 Figure. $219.95

#89971 Academy OV-10A #90056 Minibase Hobby #89778 #89921 Zoukei-Mura

Bronco Light Armed Su-33 (Flanker-D) Russian #90002 Academy™ USAF Italeri Tornado Gr.4 High Super Wing Options Air Force
Reconnaissance Aircraft Navy Carrier-Borne Fighter B-52H 20th Bomber Squadron Performance Combat Aircraft Runway Diorama Base 01
Plastic model kit, Plastic model kit, 1/48 scale. “Buccaneers” Plastic model kit, Plastic model kit, 1/32 scale. Painted, finished and ready
1/72 scale. $15.95 List $149.95 Our Price $139.95 1/144 scale. $52.95 $229.95 to use, 1/48 scale. $22.95

#90320 Tamiya German #89713 Trumpeter® German #90137 Trumpeter®

Sd.Kfz.2 Kettenkraftrad #90022 Tamiya FLAK 41 5cm Half-Track #89756 Tamiya U.S. M1A1 U.S. 155 mm M198
(Mid-Production Version) U.S. 6x6 M561 Gamma Goat Self-Propelled Anti-Aircraft Abrams with Mine Plow Towed Howitzer
Plastic model kit, Plastic model kit, 1/35 scale. Gun (Sd.Kfz.7/2) Plastic model Plastic model kit, 1/35 scale. Plastic model kit, 1/16 scale.
1/35 scale. $29.95 List $47.00 Our Price $39.95 kit, 1/35 scale. $109.95 $40.95 List $112.99 Our Price $109.99

#89801 Tamiya German #89412 MiniArt Models #89928 Zoukei-Mura Super

Infantry Military Figures Set “Dinner On The Front” Soviet #90093 Italeri® WWII German Wing Options P-51D Mustang #89785 ICM American Civil
Plastic model kit, 1/35 scale. Soldiers Diorama Plastic Elite Troops, 48 Pieces Plastic Mechanics with Fuel Tank Set War Union Infantry Figures
$17.95 model kit, 1/35 scale. $28.95 model kit, 1/72 scale. $19.95 Plastic kit, 1/32 scale. $40.95 Plastic kit, 1/35 scale. $24.95

#90095 MiniArt Models #89779

Railroad Crossing Diorama Italeri
Base Plastic model “Berlin
kit, 1/35 scale. 1945:
$59.95

#88518 Tamiya
#89816 MiniArt Models “Siege of Tobruk” German
“Poland 1944” Diorama Battle For The Reichstag” 88 mm Gun Flak37 Diorama #89526 Italeri®
Plastic model kit, 1/35 scale. Diorama Plastic model Plastic model kit, 1/48 scale. Carrier Flight Deck Section
List $49.99 Our Price $42.95 kit, 1/72 scale. $152.95 $55.95 Plastic kit, 1/72 scale. $42.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 87
 NEW ITEMS See More Model Kits at micromark.com MODEL KITS

#89222 Italeri® Zundapp KS750 #89223 Italeri® “Kettenkrad”

Motorcycle with Sidecar Plastic Model Kit, Tracked Motorcycle
1/9 Scale. $104.95 Plastic Model Kit, 1/9 Scale.
$104.95

#89947 Revell Germany B-29 Superfortress Bomber

Aircraft (Platinum Edition) Plastic model kit with
photo-etch, 1/48 scale. List $199.95 . . . Our Price $179.95

#87875 Trumpeter USS Kitty Hawk Plastic Model

Kit…List $311.95…Our Price $249.95
• Over 1400 highly detailed parts • Detailed
flight deck and hangar deck • Photo-
etched parts included
• Complete decal sets
• One-piece hull
#88632 Tamiya P-51D/K Mustang – North American
(Pacific Theater) Plastic model kit, 1/32 scale. $219.95 Scale: 1/350
Length: 36.81”
#89927 Tamiya German Beam: 9.66”
Marder III M “Normandy Front”
Plastic model kit, 1/35 scale. Shown with #90103 Trumpeter® USS Intrepid CV11 Aircraft
$45.95 #87873 KA Models Carrier Plastic Model Kit, 1/350 Scale
Deluxe Detail Set installed List $299.95 . . . Our Price $279.95
Trumpeter’s 1/350 scale model kit features more than 780 parts on 31 sprues
#87873 KA Models USS Kitty with hull, detailed flight and hangar decks, positionable aircraft elevators,
Hawk Deluxe Upgrade Kit photo-etched details and decals; armed aircraft wings with Skyraiders, A-4
List $519.95 Skyhawks, F-8 Crusaders and UH-2 Sea Sprite helicopters. Measures 31” long x
Our Price $509.95 7-1/2” wide.

#86596 Trumpeter HMS Hood #85683 Trumpeter USS Arizona 1941

Battle Cruiser Plastic Model Kit Plastic Model Kit $264.95
#90111
1917 Ford Model T LCP List $599.95…Our Price $499.95 • Two-part hull with option of full or waterline profile
(Light Car Patrol) with • Detailed 1-piece hull • Extensive photo- • Includes metal parts and 3 sheets of
Vickers Machine Gun etched parts • Detailed upperworks, photo-etch • 2 clear-molded
Plastic model kit, superstructure and full weapons floatplanes • Color painting guide
1/35 scale. suite • Fine deck fittings • Decals for hull, aircraft
$57.95 • Metal propeller shafts markings and more
Scale: 1/200
Scale: 1/200 Length: 36.5”
Length: 51.6” Shown with
$
13
ADDITIONAL
#85685 KA Models
Shown with #86657 FREIGHT Deluxe Detail
ANYWHERE IN
Deluxe Detail Set installed LOWER 48 STATES Set installed

#86656 Detail Upgrade Kit for HMS Hood #85685 KA Models USS
$41.95 Arizona Deluxe Upgrade Kit
#86657 Deluxe Detail Upgrade Kit for HMS List $314.95
#90106 #86657 Hood. List $529.95 . . . Our Price $509.95 Our Price $304.95
Italeri®
North #85681 Trumpeter Bismarck Plastic Model Kit #87737 Trumpeter DKM U-Boat Type VIIC U-552
American List $379.95…Our Price $349.95 Plastic Model Kit
FJ-2/3 Fury
Swept-Wing • 1,700 detailed plastic parts • Turned metal
Carrier Fighter gun barrels • Photo-etched handrails,
Plastic Model Kit, 1/48 Scale. $47.95 ladders, radar antennae, ladders,
and more • Color painting guide
• Includes display stand
#88361 Tamiya USS
Enterprise Aircraft Carrier Scale: 1/200
Plastic model kit, Length: 50”
1/350 scale. Beam: 7”
$239.95
Shown with #86656
Deluxe Detail Set installed

#85682 Detail Set for Bismarck $47.95 #87737 Trumpeter DKM U-Boat Type VIIC U-552 Plastic Model Kit
#85715 Deluxe Detail Set for Bismarck • 1/48 scale; Length: 55” • 2-piece full hull, with full interior details seen through
List $469.95 . . . Our Price $419.95 the transparent starboard hull • Highly detailed interior with front and rear living
#85715 quarters • 48 crew figures • Photo-etch details. List $599.95…Our Price $489.95

88 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 MODEL KITS See More Model Kits at micromark.com Follow us on NEW ITEMS
Model Airways Kits Museum-quality kits include laser-cut wood, fine cast Britannia metal parts and are historically accurate with exceptional detail and step-by-step plans.
The planes are open airframe to show the structural detail. Made in America. See more details of each model on our website.
#88309 #88306 1:16 scale. Wingspan: 21”;
Sopwith fuselage: 14-1/16”.
Camel
Hundreds
of laser-cut
basswood and
birch parts
replicate the ribs
and fuselage; precision
cast Britannia metal
components include the
#88308 rotary engine’s cylinders,
distributor and crankcase.
#88309 The Wright Flyer includes laser-cut #88308 Nieuport 28 This model kit of the Additional parts are made of
basswood parts, plus Britannia metal cylin- legendary World War I fighter is a replica of brass, rubber and copper wire. $284.95
ders, magneto and radiator. A brass chain Eddie Rickenbacker’s airplane, recreated
and over 160 photo-etched brass parts for from original plans, photos and restored air-
fittings and braces to simulate the 1903 craft. Includes hundreds of laser-cut wood
Wright Brothers’ design. 1:16 scale. Wingspan: parts and finely cast metal components. 1:16
30”; length: 15”. For intermediate-level scale. Wingspan: 20”; fuselage: 15-3/4”. For
modelers. $157.95 intermediate-level modelers. $284.95

#88307 Albatros D.Va, The Red Baron’s

Airplane Kit includes birch fuselage bulk-
heads, wing ribs and pilot’s seat, basswood
fuselage stringers and wing rib caps. The
cockpit is reproduced in authentic detail,
complete with tachometer, pressure gauge #88305 #88310
and compass. The realistic 180 hp Mercedes-
Benz engine is comprised of highly detailed #88305 Curtis JN4D “Jenny” The famous #88310 Fokker DR. 1 Powered by the nine
Britannia metal parts. 1:16 scale. Wingspan: WWI training plane is replicated in 1:16 cylinder rotary Oberursel UR II engine, the
22-1/2”; fuselage 18-1/4”. For intermediate scale. Wingspan: 32-1/2”; fuselage: 20-1/2”. DR. 1 was The Red Baron’s Favorite Fighter.
#88307
level modelers. $284.95 For intermediate-level modelers. $524.95 1:16 scale. Wingspan: 17-3/4”. $419.95

Guns of History Kits 1:16 scale metal replicas with precision cast metal cannons, realistic wheels and other life-like details. NEW MODEL AIRWAYS KITS

#90267
Oberursel Engine
Model Kit,
1:16 scale
This 9-cylinder
aircraft engine powered many
German fighter planes in WWI. Laser-cut
#88314 Parrott Rifle 10-pounder. #88312 Napoleon Cannon #88318 Whitworth Cannon #29085 Guns of History
basswood, cast Britannia and brass parts.
$67.95 12-pounder. $67.95 12-pounder. $67.95 Paint Set High-quality acrylics for
6” prop. List $62.95 . . . Our Price $39.95
#88315 Parrott Rifle #88313 Napoleon Cannon #88319 Whitworth Cannon airbrush or brush-on application.
& Ammo Cart Set $119.95 & Ammo Cart Set $119.98 & Ammo Cart Set $119.95 3 colors, plus primer. 1 oz ea. $21.95
#88989 Clerget 9B WWI Rotary
Purchase any of the 3 #88998 Aircraft Engine Model Kit,
gun models above Civil War 1:16 scale This
with the Ammo air-cooled
“Rucker” engine
Cart at a special Ambulance,
discount price! powered
1/16 Scale many famous
Laser-cut WWI fighters.
6-1/4”
wood and Laser-cut wood,
prop.
cast metal cast metal and
parts, canvas brass parts.
top and more. List $62.49
#88320 Civil War Limber Ammo cart. #88311 Gatling Gun Circa 1866. $104.95 Our Price $49.95
$57.95 $67.95

Model Trailways Kits Beautifully rendered and historically accurate early period kits with wood and metal components. 1:12 scale. See our website for complete details.
#88323 Concord Stagecoach #89103 Horse Drawn Hearse Wagon #90035 Phillips 66® Oil Tank Wagon #90062
13-3/4” long; Circa 1895. 11-1/2” long, Jail
8-3/4” high. 5-3/4” wide; Wagon
$229.95 6-1/4”
high.

13” long x 5” wide; 8” high. List $187.49 12-3/4” x 5-3/4” ;

List $162.49 $137.95 Our Price $149.95 9” high. $119.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 89
 HAND TOOLS SUPPLIES
Special Plier Makes Pin Insertion Trouble-free Tool Maker’s
Surface Gauge
Our custom-designed Pin Insertion Plier
drives micro-size pins without the
for Precision
troublesome bending and kinking Marking
that occur when using a regular
plier. Special, slotted jaws with
grooved tips let you securely
hold a pin near its pointed end
for kink-free insertion. After the
pin is started, re-grip it and push
again. Then use the flat tip of the plier
to push it home. Comfortable rubber handles
#88064 Electric Plank Bender Place your let you work for hours.
strip on the wooden form and heat it by #85282 Pin Insertion Plier $24.95
moving the plank bender over it several
times, creating a perfect curve. Set includes #81844 Mini Nails, ideal for use with above. 3/8” long x .020” diameter (pkg. of 100). $5.95
soldering iron handle with round metal This precision device is used by tool makers
head, plus a wood pattern with 2 different The No-Fuss Way to Push to mark a perfectly straight and parallel
curves. Made by Model Shipways. the Tiniest Pins and Nails line at the exact height required. Excellent
List $43.74 . . . Our Price $36.99 for marking scale ship model waterlines
Beautifully crafted and easy-to-hold, our
Push Hammer eliminates the hassle of and for transferring gunport, porthole and
Flush Cutter with a New Angle driving tiny nails and pins with a conven- other item locations from the ship’s plan
tional hammer. Simply insert the nail or to the hull. Adjusts quickly to approximate
pin head-first into the spring-loaded barrel location with coarse adjustment knob and
and push for straight, lightning fast results then to exact location with fine micrometer
every time. Made to Micro-Mark specifica- type adjustment knob. Measures and
tions of machined brass and steel with marks any height from 0” to 10”. Made of
hardwood handle. Overall length: 7”. steel with ground and polished base and
needle sharp scriber. Can also be used
#83228 Push Hammer for pins #83227 Push Hammer for nails with
with a pencil.
with head dia. up to 3/64” $18.95 head dia. from 3/64” to 3/32” $16.95
Micro-Mark’s Recommended pins/nails: #81844 and #14315. See our website. Recommended nails: #14316. See our website.
#60520 Tool Maker’s Surface Gauge
uniquely designed List $54.95 . . . Our Price $39.95
End Nipper has a Fair-A-Frame Building Slip
cutting edge that #20124
runs across the Designed to accommodate virtually any
5-piece Probe Set
narrow tip of the plier, size keel, Fair-A-Frame aligns bulkheads
Surgical quality
not along the sides of the jaws. The nipper perfectly, making plank-on-bulkhead hull
assembly fast and accurate. Two parallel probes have
is used “straight-in,” not from the side, and hundreds of uses
the cutting edge is less than 1/8” wide, guides hold the keel as you work, while an
adjustable alignment unit straddles the for model makers,
so it fits in tight places. Sharp, durable crafters, jewelers,
cutting edges cut flush with the surface, base, ensuring that all bulkheads are
square to the false keel. A set of ten metal miniaturists and
so cleanup is not required. Rubber-coated more. Excellent
handles provide a comfortable grip. Cuts screws makes the unit fully adjustable in
height as well as width. Easy-to-assemble for manipulating
off pins* that protrude up to 3/4”. Overall model ship rigging,
length: 5-1/2”. Precision made exclusively kit includes base, laser cut wooden parts, all
necessary hardware, plus instructions for hooking springs
for Micro-Mark by Xuron.
assembly and use. Base: 24” x 4-1/2”. and for ceramic
#85916 End Nipper $25.95 detail work as well.
*Designed for use on soft brass pins; not for use on #88058 Fair-A-Frame Building Slip/Alignment Tool. List $62.49 . . . Our Price $49.99
Polished and
harder materials, such as steel or music wire.
Stainless Steel Scissors for a Lifetime of Use hardened stainless
These are actually surgically sharp dissecting scissors made of instrument steel with needle-
Pin Collars...A Unique quality stainless steel. Precision alignment cuts the thinnest material sharp points.
6” long. $19.95
Way of Holding Parts cleanly to the tip. Excellent for ship model rigging, decoupage,
miniature fabrics and other needlecraft work. 4-1/2” long.
During Assembly
#14177 Dissecting Scissors $8.95
Wheel & Gear
Flitz Does It All! Micro-Mark Tip for railroad modelers: Remover
Flitz is the universal polish that cleans, Polishing railheads with Flitz promotes good electrical
shines and protects aluminum, brass, contact and protects against corrosion for months.
stainless steel, copper, chrome, gold and
silver. It’s also an excellent fiberglass
cleaner, and it restores painted finishes as
well. Use Flitz paste anywhere; especially
on vertical surfaces and other places
where a liquid could drip, spill or run.
#60436 Flitz, Polish Paste 1.76 oz
$11.95
Pin collars are special fittings that lock into
#86638 Flitz, Liquid Polish, 7.60 oz
position on straight or T-pins. They hold
$16.95
Before After
parts in place during assembly when there Use the included hex key to turn in the
is no room for traditional spring, bar or threaded ram. The shaft will be pushed
#80587 Beeswax Use for eliminating #88419 Black
screw-type clamps. Set includes 20 collars, out of the gear; same for axles and wheels.
20 Allen head cap screws, a ball-end hex Bars fuzz on ship model Rigging Line, Super
rigging thread. Fine, by Infini Model Works on axles and shafts 1/16” diameter
key that works at an angle for easy access, and larger; wheels and gears up to 1-5/8”
plus instructions for use. Collars are 1/4” dia. Also used to Made of Lycra-Only
lubricate bits and material. For 1/72 scale diameter. Includes 2 rams (approx. .058”
Use with #14318 T-pins (below) or similar. and .098” diameter tips), plus V-plate for
saw blades for areo models and other
#84419 Pin Collar Set $16.95 cutting metal. applications. Easy and small wheels, gears and shafts. Clearance
2 or more sets $14.50 per set Three 1 oz. bars. quick to use. 0.055 mm under ram 3/4”; slot width 1/2”.
Rigging thread not included.
#14318 T- Pins, package of 50 $5.95 $8.95 thick x 145 feet. $13.95 #84746 Wheel & Gear Remover $29.95

90 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 HAND TOOLS Follow us on
Ship Modeler’s Mini Fingers for Ship The Best Way to Clamp Ship Model Planks
Deluxe Tool Chest Modelers These all-metal planking clamps
hold ship model planks tight
against the bulkhead until glue
dries. The unique stepped
clamp design holds the plank
against its full surface so you’ll
get neater, tighter fitting joints,
and the knurled aluminum
finger grip makes turning a lot
easier. The micro-size wood
This set of rigging tools makes ship mod- screw is press-fit into the finger
eling’s most difficult task a lot easier. grip and will hold in bulkheads
You’ll be able to retrieve, hook, position, as thin as 1/8”. 1-1/4” long x
tie, gather, maneuver, hold, fish, pull and 1/4” diameter. Set of ten.
reach rigging lines on any part of your knurled
#60926 Planking Clamp Set aluminum grip
model. Slim, 7” long handles keep your
$24.95
fingers away from lines you’ve already
2 or more sets $19.50/set
installed so you won’t have to retighten
Includes: #1 and #2 knife handles, #5 knife
lines and make repairs. Especially useful
and razor saw handle, scribing awl, needle The easiest way to form planks yet! Simply
for tying lines to belaying pins, cleats, bitts Plank Forming Jig
nose plier, aluminum miter box, tweezers, arrange one row of the adjustable formers
and eye bolts. Steel shanks are set in
sanding block and wedge, razor saw, to the desired shape and soak planks in hot
smooth lacquered artist brush handles.
3 drills, 4 gouges, 15 knife blades and fitted water. When pliable, place the planks against
wooden chest. #60378 5-piece Rigging Tool Set the first row of formers and slide the second
List $30.00 . . . Our Price $24.95 row against the planks to hold them tightly
#81504 Ship Modeler’s Tool Set
List $86.55 . . . Our Price $66.95 in place. When dry, planks will be permanently
Triple Duty Foam Cradle formed. Forms up to 5 planks at a time. Made
Plank Bending Tool for Ship Models of water resistant acrylic with 10 nylon formers
and cap nuts, zinc plated screws and no-slip
for Ship Models, Dollhouses, silicone rubber feet. Approx. 5” x 5” with
Dioramas and More 1” high nylon formers.
#60663 Plank Forming Jig. List $30.00 $24.95

Cross Extra-Long Magnetic Gluing Jig

Section

This well designed tool will bend wood

strips without special fixtures, hot irons
or soaking in water. One jaw is ground to
Our custom-designed Ship Cradle holds
a triangular edge, the other is flat. When
models while you build, decorate or repair.
you place a strip of wood between the
Concave shape holds large scale models
jaws and squeeze the handles, the
and, with the included insert, adapts to
triangular jaw crimps a V shape into the #70223 Extra-Long Magnetic Gluing Jig is ideal for assembly of long projects. Includes
hold small-scale models as well. Use
back side. Since the other jaw is flat, the 6” x 24”, 21 gauge, rust-resistant flat steel plate and 8 magnetic holding plates.
convex shape when you want to work on
opposite side of the strip stays smooth. $24.95 2 or more $22.95 ea.
the entire hull. Safely tip the model in the
And since there’s a slight gap between #60305 Extra Magnetic Plates (8) for Gluing Jigs $12.95
cradle for access with the superstructure
the jaws, you get the right amount of
installed. Durable CNC-cut foam rubber
compression automatically. The curve you Ship Modeler’s Ratliner
holds hulls from 2-3/4” to 5-1/2” (beam)
get depends on how far apart you put the
gently, yet securely. Includes all 3 pieces. Tight Spot Rigging Scissor Shroud
crimps. It’s the quickest and easiest way
Overall size: 7-1/2” wide x 3-1/2” high x
we know to bend ship model planking.
15” long. Convex shape: 3” wide. Building Tool
Can also be used for dollhouses, dioramas
and anytime you need a curved strip of #85819 Model Ship Foam Cradle by Model
wood, soft plastic or cardboard. Handles List $24.95 $19.95 3 or more $14.95 ea. Shipways
stock from 1/32” to 3/32” thick x 3/4” wide
x any length. Loom-A-Line
#60379 Plank Bending Tool $29.95 Makes Ship
Model
“Big Eye” Threads Rigging
Needles, Deadeyes Fast, Neat
& Blocks with and Easy
Ease
Special scissor has cutting edges that pass
Nothing works as well as this Ratliner to
between ratlines, backstays and other
produce accurately scaled ratlines in the
#60529 Loom-A-Line rigging jig helps standing rigging for easy trimming of
shortest possible time. Made of laser-cut
No more struggling to get thread through make perfectly spaced lines with equal interior lines that other scissors can’t
MDF. Instructions included. Choose from
all those tiny holes when building ship line tension and neatly tied knots. Off-the- reach. Serrated teeth grip thread for
three sizes available. $29.99 each
models. The pointed end pierces fabric, model assembly lessens the chance of no-slip cutting. 8” overall length (narrow
so it’s also a great tool for rigging sails. part of “neck” reaches 4-1/2”). Made of #88061 Ratliner, 1:35 – 1:48 Scale
damage to pre-installed parts. Made of
2” long. Eye opens to 1/4”. high impact plastic with 30 brass studs. surgical stainless steel. #88060 Ratliner, 1:64 Scale
#81009 Big Eye (Set of 3) $8.95 10” x 8”. Instructions included. $19.95 #84737 Tight Spot Scissor $23.95 #88059 Ratliner, 1:76 – 1:90 Scale

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 91
 POWER TOOLS HAND TOOLS Follow us on MODEL KITS

#87863 7-1/4” Angled Rigging Scissor This beautifully made,

long-reach scissor features super-sharp tungsten carbide cutting
edges and surgical quality, high carbon 420 stainless steel handles.
1” long, 45° angled tips allow superior access and the gold electro-
polished ring eyes are the most comfortable shape and size you’ll
find anywhere…providing exceptional grip and control. $44.45
#87860 4-piece Rigging Fingers Tool Set
Originally designed for use by surgeons, our single,
double, triple and quad-fingered tools are perfect
#88062 Blockbuster High Speed Block Shaper for the delicate and demanding art of model ship
As the sandpaper-lined cylinder spins, the blocks rigging. Overall length: 6.25” to 7.25”. Two and
tumble around and rub against it, taking on their three-fingered tools feature spring shanks for
smooth, rounded shape. Process dozens at a time. added flexibility.
Blockbuster is easy to assemble and requires an List $105.95 . . . Our Price $39.95 #87863 #87860
electric drill for operation. $11.95

High-Quality Model Kits from Dumas

Dumas’ line of high quality boat kits feature laser-cut and die-cut wood parts accentuated by exquisite cast and turned details, ready for the application of fine finishes on select
woods. Detailed instructions assure satisfaction for any model builder from intermediate to expert. See our website for full descriptions and for photos of models not shown here.

#85672 #86494
Rusty the Shrimp Boat – Another Fine Dumas Model
Hull: balsa planking over laser-cut poplar plywood
frames. Die-cut expanded pvc cabin and pilot
house. Material for scaffolding, nets,
outriggers. Length: 36”, Beam: 9”,
Scale 1/24. Dumas Kit #1271.
#86493 Rusty the Shrimp Boat
List $325.00
Our Price $299.95
#85673 #86257
#86575 Running
Hardware Kit
$72.95

#87826 1956 Chris-Craft 21’ Capri

Wood model kit, 1/24 scale.
$84.95

#85672 1949 Chris-Craft Racing Runabout Wooden Boat, 1/8 Scale

Double-planked mahogany veneer over PVC hull • Chrome-plated deck fittings • Full-color
#88427 1938 24’ Chris-Craft® decals • Flag and burgee • Running hardware included • Length: 28”, Beam: 9” • Dumas
Triple Cockpit Barrel Back R/C Kit #1249. $291.95
1/8 Scale Wood Model Kit Set #86494 Carol Moran Tug Boat Kit, 1/25 Scale Laser-cut plank-on-frame
Complete set turns this beautiful kit construction • Urethane castings and vacuum-formed components • Turned
into a R/C runner! Includes model, brass and cast metal parts • Length: 50”, Beam: 13.5” • Dumas Kit #1272.
running hardware, motor, batteries, List $550.00 . . . Our Price $479.95
controller and more! #86576 Running Hardware Kit for #86494 Carol Moran Includes prop shaft, stuffing
List $795.85 . . . Super Buy $599.95 box, 4-blade bronze propeller, gears and more. $157.95
#85671 Model Kit Only $369.95
#85673 1954 Chris-Craft Commander Express Cruiser Wooden Boat, 1/12 Scale
All-wood kit • Laser-cut mahogany cabin detail and trim • Vacuum-formed seats • Deck
#86687 19’ Chris-Craft Racer fittings • Length: 36”, Beam: 10.75” • Dumas Kit #1244. List $395.00 . . . Our Price $339.95
Wood model kit, 1/24 scale
$72.95 #86257 City of Buffalo Lake Ferry Boat Kit, 1/48 Scale Laser-cut plank-on-frame con-
struction • Length: 33”; Beam: 8” • Dumas Kit #1270. List $300.00 . . . Our Price $284.95
#86329 Running Hardware Kit for #86257 City of Buffalo Includes shaft, stuffing box,
coupling, coupling rod, brass propeller and more. $62.95
#86686 Skipjack Sailboat #85676 Brooklyn Tug Boat, 1/32 Scale Vacuum-formed plastic hull • Die-
Wood model kit. $77.95 cut superstructure parts • Laser-cut details • Castings • Brass railings • Length:
39.5”, Beam: 9.5” • Dumas Kit #1238. List $435.00 . . . Our Price $409.95*

Founded in 1928, the Scientific Model Airplane Co.

#87382 #87383 #87384 was an innovator in the hobby industry. That tradition
continues through today with Micro-Mark. These fine
wood-framed, rubber band-powered model aircraft by
Dumas are a call-back to our roots. Traditional materials
and building techniques make these classic fliers
rewarding and enjoyable projects.
#87382 Dumas WWI Avro 504 Flying Model Kit
$47.95
#87385 #87386 #87383 Dumas Sopwith Triplane Flying Model Kit
$47.95
#87384 Dumas Neiuport 27 Flying Model Kit
$49.95
#87385 Dumas Pfalz D3 Flying Model Kit
$41.95
All Models Feature
#87386 Dumas Sopwith Snipe Flying Model Kit
Fully Detailed Frames! $57.95

92 • ORDER TOLL FREE 1-800-225-1066 *Use our website shopping cart to calculate freight charge for shipment outside 48 contiguous U.S., or call our order line for assistance.
 MODEL KITS See More Model Kits at micromark.com NEW ITEMS
Museum-Quality Model Ship Kits by Artesania Latina See full descriptions at www.micromark.com
Artesania Latina ship kits are respected by hobbyists worldwide as among the most-detailed and historically-accurate scale models. Created from plans of the real ships, A-L kits
employ woods like mahogany, beech and walnut for the structural parts, and include laser-cut ornamentation, cast and/or machined fittings, rigging lines, detailed plans and
instructions…everything you need (except for tools, glue and paint) to assemble your own large-size, exact-scale historic ship models.

A B C D

E F G H

J K L M N P

A. #85650 HMS Bounty, 1/48 Scale Plank-on-frame construction. Includes an extensive

set of fittings, cannons, photo-etched details, pre-sewn sails, ship’s cargo and a ship’s stove.
Q R
Recommended for advanced level modelers. Length: 38.6”, height: 30.0”, beam: 14.0”.
Artesania Latina kit #22860. $369.95*
B. #85649 USS Constellation, 1/85 Scale Double plank-on-bulkhead construction.
Includes carronades, bronzed metal cannons, and pre-sewn sails. Recommended for
advanced level modelers. Length: 40.7”, height: 34.6”, beam: 17.7”. Artesania Latina kit
#22850. $309.95*
C. #87902 San Juan De Nepomuceno, 1/90 Scale Plank-on-frame construction.
Includes fine woods, pre-sewn sails, brass components and die-cast parts. Recommended
for advanced level modelers. Length: 37.75”, height: 29.5”, beam: 15.75”. Artesania Latina
kit #22900. $369.95*
D. #86246 Cutty Sark, 1/84 Scale (Compatible with HO) Plank-on-bulkhead construction. advanced level modelers. Length: 27.2”, height: 22.4”, beam: 4.3”. Artesania Latina kit
Includes hardwood fittings, brass and die-cast metal parts, pre-sewn sails, cloth flag and #22453. $147.95
pennants. Recommended for advanced level modelers. Length: 40.6”, height: 24.5”, beam: L. #85645 Swift, 1/50 Scale Double plank-on-frame construction. Includes brass fittings
14.0”. Artesania Latina kit #22800. $399.95* and pre-sewn sails. A great kit for beginning modelers. Length: 21.3”, height: 18.1”, beam:
E. #88070 Belem French Training Ship, 1/75 Scale Plank-on-frame construction. 4.3”. Artesania Latina kit #22110-N. $84.95
Includes laser-cut board parts, hardwood pieces, photo-etched and cast metal parts, M. #86247 San Francisco II Galleon, 1/90 Scale Plank-on-bulkhead construction. Brass
rigging line, fabric sails and wood base. Length: 31.73”; height: 21.26”; beam: 10.07”. fittings include blocks, eyebolts, pinracks and more. Includes pre-sewn cloth sails and
Artesania Latina kit #22401. $275.95 cloth flag. Recommended for advanced level modelers. Length: 27.2”, height: 22.4”, beam:
F. #85648 King Of The Mississippi Riverboat, 1/80 Scale Plank-on-bulkhead construc- 4.3”. Artesania Latina kit #22452. $147.95
tion. Includes high-precision laser-cut wooden parts, plus photo-etched and die-cast N. #88862 Red Dragon Chinese Junk, 1/60 Scale False keel and frame construction.
components, brass fittings, chains, and rigging line. Recommended for intermediate level Includes laser-cut board parts, hardwood pieces, brass, die-cast parts and fabric sails.
modelers. Length: 26.0”, height: 7.6”, beam: 5.1”. Artesania Latina kit #20505. $144.95 Length: 18.89”, height: 17.32”, beam: 5.11”. Artesania Latina kit #20210. $132.95
G. #86167 Marina II Fishing Boat, 1/50 Scale Plank-on-frame construction. Includes P. #86508 10th Century Viking Longboat, 1/75 Scale Plank-on-bulkhead construction.
brass nails; turned brass, wood, and cast metal parts and deck fittings; display base. Includes die-cast metal and wood fittings, pre-sewn sail, display base and instructional
Recommended for intermediate level modelers. Length: 24.0”, height: 17.7”, beam: 6.2”. DVD. A great kit for beginners. Length: 11.5”, height: 10.8”, beam: 14.2”. Artesania Latina
Artesania Latina kit #20506. $147.95 kit #19001-N. $69.95
H. #88863 Atlantic Tugboat, 1/50 Scale High-quality ABS hull, great for R/C conversion. Q. #88354 Artesania Latina San Francisco II Galleon Cross-Section, 1/50 Scale Model
Includes laser-cut wood and cast metal parts, plus photo-etched detail pieces and display kit features fine woods, brass and cast iron parts. $91.95
base. Length: 41.73”, height: 23.62”, beam: 9.84”. Artesania Latina kit #20210. $349.95
R. #89789 Artesania Latina Messerschmitt Bf109G, 1/16 Scale Re-start the engines!
J. #86059 American Schooner Virginia, 1/41 Scale Double plank-on-bulkhead The iconic German WWII fighter airplane Messerschmitt Bf109G has returned as a 1/16
construction. Includes brass fittings, flag and pre-sewn sails. Recommended for scale model crafted in high-quality metal and plastic, thanks to Artesania Latina. A fantastic
intermediate modelers. Length: 21.25 ”, Height: 19.69”, Beam: 4.72”. Artesania Latina kit non-flying model kit for advanced modelers that includes many moving parts and as a
#22135. $89.95 bonus…LED lights, engine and an exhibition base in methacrylate! Once assembled, this
K. #86169 Bluenose II Canadian Fishing Schooner, 1/75 Scale Plank-on-frame fabulous replica is 22.24’’ long, 24.40’’ wide and 8.07” high; weighs 3.52 lbs.
construction. Includes brass nails and cast-metal deck fittings. Recommended for List $729.95 . . . Our Price $700.95 See our website for additional images and details.

*Use our website shopping cart to calculate freight charge for shipment outside 48 contiguous U.S., or call our order line for assistance. ORDER ONLINE www.micromark.com • 93
 NEW ITEMS See More Model Kits at micromark.com MODEL KITS
Model Shipways produces some of the finest wood model kits available today, right here in the USA. Each historically accurate American ship and boat has been painstakingly
researched and designed from original and/or restoration plans of the actual vessels. But the attention to detail does not stop there. Every kit includes one of the best instruction manuals
you will ever see, overflowing with historical information, photo documentation and exceptionally well-written and carefully thought-out step-by-step instructions for building
and finishing each extraordinary model. Combined with features including single planked hulls, true-scale fittings, accurately sized and colored rigging, and perhaps the most
comprehensive parts replacement policy anywhere, Model Shipways wood model kits are among the best you’ll ever build. Recommended for experienced builders.

#90170
USS Constitution
Cross Section, 1797
Arguably the most detailed
model of the Constitution
ever produced, this version
represents the latest
restoration of Old
Ironsides now berthed
in Boston Harbor.
Features include
5 mm bulkhead
and false keel
plywood
framing,
basswood
planking, cast
Britannia parts,
photo-etch,
#88050 USS Constitution, 1797 #89131 Niagara Battle Lake Erie #89128 Bluenose Canadian Fishing Schooner
6 sizes of rigging
Wood model kit with true-to-scale Britannia metal, brass Laser cut basswood parts facilitate plank-on-bulkhead Plank-on-bulkhead construction. Fittings are true to the
line and more.
and hardwood fittings, 16 photo-etched brass sheets, construction. Includes true-to-scale Britannia metal, originals, and include wooden blocks and deadeyes,
1/76 scale.
and more. Plank-on-bulkhead construction. The best 4” x 32” high. brass and hardwood fittings assure scale accuracy. brass ring and eyebolts, plus Britannia metal parts.
Constitution kit available. 1/76 scale. 48” long; 32” high; $219.95 1/64 scale. 43” long; 27” high. 1/64 scale. 32” long; 26-1/2” high.
16” wide. List $712.99 . . . Our Price $599.95 List $462.49 . . . Our Price $389.95 List $274.99 . . . Our Price $229.95

#88045 #88571 Benjamin Latham “Fisherman” #88572 Emma C. Berry Lobster Smack #88044 18th Century Longboat
Flying Fish Authentic plank-on-bulkhead seine boat construction. True plank-on-frame construction with the same number Wood model kit with brass and cast metal parts, plus pre-
Wood model kit with true-to-scale wood, brass and Basswood planking and parts, over 100 wooden blocks of true-to scale frames as the original. Beech and basswood printed decorative work. Plank-on-frame construction.
Britannia metal fittings, rigging line, and more. 1/96 scale. and deadeyes, rigging line, plus a comprehensive set of planking, walnut blocks and deadeyes, Britannia metal 1/48 scale. 11.75” long; 10” high. $51.95
36” long; 22-1/2” high. Britannia metal fittings. 1/48 scale. 33” long; 27” high. fittings and anchor shank, rigging line and more. #88887 Longboat Set includes everything you need to
List $499.99 . . . Our Price $419.95 List $312.49 . . . Our Price $269.95 1/32 scale. 26-3/8” L; 28-1/2” H. List $212.49 $184.95 complete this outstanding model in 1 box. $72.95

#29084 Historic Ships Paint Assortment

High-quality acrylics for airbrush or brush-on
application. 10 colors, plus 2 bottles of primer.
1 oz each. List $62.49 . . . Our Price $52.95
#88693 Copper Modeler’s Chain, HO (1/87)
Scale Two one-foot lengths of genuine copper
chain at 42 links per inch. $15.95

#89130 Mayflower “Pilgrim’s Pride,” 1620 #88051 #88053 USN Picket, Boat #1
Pank-on-bulkhead construction. Features ready-to-use Pride of Baltimore II You’ll build this wood model much the same way as the #88047 New Bedford Whaleboat, 1850 – 1870
hardwood blocks and deadeyes, precision cast Britannia Wood model kit with Britannia metal castings, brass prototype was built almost 150 years ago… Wood model kit with authentic whaling gear, photo-etched
metal and brass detail parts and five diameters of rigging parts, rigging line, and more. 1/64 scale. 32” long; except laser-cut basswood parts and ready-made fittings copper fittings, and more. Plank-on-frame construction.
line. 1/76 scale. 22” long; 17” high. 22-1/2” high. make assembly much easier. 1/24 scale. 1/16 scale. 24” long.
List $274.99 . . . Our Price $229.95 List $299.99 . . . Our Price $254.95 List $212.49 . . . Our Price $179.95 List $212.49 . . . Our Price $169.99

94 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 MODEL KITS Follow us on HAND TOOLS NEW ITEMS
More Model Kits from Model Shipways, NautiCurso, Mamoli and OcCre See our website for full descriptions and additional photos
#88046 Rattlesnake U.S. Privateer
Wood model kit with Britannia
castings, brass fittings,
rigging line, and
more. 1/64 scale.
28” long;
18” high.
List $299.99
Our Price
$252.95
#90174 NautiCurso Mighty Mite Steam Powered
Harbor Tug Boat Features include full wood plank on
bulkhead construction; cast white metal and resin parts,
vinyl lettering and full-color instruction manual. 1/64
scale. 14” long, 5” high; 6” beam. Designed and manu-
#89129 Model Shipways American Privateer Armed
factured in Brazil by NautiCurso of Praia Grande, near
Virginia Sloop, 1768 #88226 Model Shipways USF Confederacy, 1778
Sao Paulo. NautiCurso is the premier producer of wood
Double plank-on-bulkhead construction, wood and metal Plank-on-bulkhead wood and metal model kit,
hobby kits in Brazil. List $124.99 . . . Our Price $99.95
model kit, 1/48 scale. List $337.49 . . . Our Price $269.99 1/64 scale. List $812.49 . . . Our Price $689.95

#89133 Mamoli CSS Alabama #89136 Mamoli Lexington #89135 Mamoli HMS Bounty #89134 Mamoli “Black Prince” Privateer Corsair
Plank-on-bulkhead wood model kit, 1/120 scale Plank-on-frame wood model kit, 1/100 scale. Plank-on-bulkhead wood model kit, 1/100 scale. Wood model kit, 1/57 scale.
List $339.99 . . . Our Price $284.95 List $212.49 . . . Our Price $179.95 List $212.49 . . . Our Price $177.95 List $174.99 . . . Our Price $149.95

#87747 OcCre Santisima

Trinidad Ship Cross-Section
#88952 Model Shipways Lowell Grand Banks Dory #89124 Model Shipways #90257
Wood model kit with cloth sails,
with Glue, Tools and Paint 18th Century Armed Longboat OcCre Endurance
1/90 scale. 34.49” high.
Plank-on-frame wood model kit, 1/24 scale. Plank-on-frame wood and metal model kit, 1/24 scale. Wood model kit, 1/70 scale. 29.7” long, 8.5” wide;
$237.95
List $62.49 . . . Our Price $54.95 List $124.99 . . . Our Price $109.95 17.6” high. $174.95

Unique Tools for Micro Makers

Micro Shapers –
Amazing tools
for making
your own mini
moldings!

#87733 Micro Shapers, Set A Set of 3 plates

#89560 with 15 or 16 different shapes per plate.
OcCre Suitable for use on 1x3, 1x4, 1x5, 2x2, 2x4,
Lisboa 2x5 and 4x4 mm strips of wood.
Tram $16.95
#87734 Micro Shapers, Set B Set of 3 plates
with 12, 15, or 16 different shapes per plate.
Wood
#89559 OcCre San Francisco Cable Car For use on 1.5x3, 1.5x4, 1.5x5, 2x3, 3x3, 3x5
model kit, 1/24 scale.
#90273 OcCre Lacroze “Buenos Aires” Tram Wood model kit, 1/24 scale. 17” long, 4” wide; 6” high. and 5x5 mm strips of wood.
14” long, 4” wide. $155.95
1/24 scale model kit. 17” long, 4.25” wide. $129.95 $188.95 $16.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 95
 POWER TOOLS HAND TOOLS SUPPLIES MODEL TRAINS Follow us on
If You Can Imagine It, You Can Create It – with Hot Wire Foam Factory Cutting and Sculpting Tools
Unleash your creativity! There has never been an easier way to sculpt anything, from scale model railroad scenery, to 1-to-1 architectural
elements to larger-than-life-size creatures and more. With these easy-to-use tools, inexpensive, ordinary light-weight foam can be cut,
shaped and transformed into virtually anything you can dream up. There has never been a quicker, more cost-effective way to bring your
vision to reality. And, with our variety of finishing products, the pieces you create can even be made to withstand the elements outdoors.

#86324 Applicator Brushes (50 pieces)

Great for use with weathering powders. Soft,
pliable hairs pick up just the right amount
of powder and gently deposit it around
#87932 details, along rivet lines, and into cracks
and crevasses, then softly blend colors for
See our website for our full line of maximum realism. Also good for glue, paint
touch-up and more. 3” long plastic handles.
individual Hot Wire Foam Factory tools, List $15.95 . . . Our Price $11.95
#87709 #87637 finishing supplies, accessories and more!
NeolubeTM Blackens Metal,
#87709 Pro Model 5-In-1 3D Deluxe 24” Table Kit Need to do because it’s a great value, but because it’s got everything you’ve
scroll cutting, routing, milling, and lathe cutting? You will get all ever needed for your foam projects, big or small. Kit includes 3” Lubricates, and Improves
that and more in this ultimate multi-function professional foam Hot Knife, Sculpting Tool, Precision Engraver and Freehand Router Electrical Conductivity
cutting system. Kit includes 3D Deluxe 24-Inch Table • 3” Hot Knife, • Power Station • 85-minute Hot Wire Foam Factory DVD • Large,
Sculpting Tool, Precision Engraver and Freehand Router • Variable- sturdy carrying case • Printed instructions. $209.95
Heat Pro Power Station • 11.5” Vertical Blades; allow unlimited
#87932 Pro Scroll Table Kit Our Heavy Duty Pro Scroll Table has
length horizontal cuts • Ultra-fine 8” Precision Blades; slice foam
30% more power than the light duty version sold by others. This
paper thin • 10” Router Blades; can be bent with fingers to any
extra power allows the use of a larger diameter wire that you
shape • Ribbon Blades for cutting foam moldings • Stationary
pre-form into any desired shape. Kit includes L-shaped Scroll
Fence for controlled slicing • Unique Traveling Fence for control-
Table • Stationary Fence for precision cuts and paper-thin slicing
lable complex angles • Second horizontal rod for overhead milling
• Traveling Fence for complex angle cutting and for shaping
operations • Instructional DVD • Printed instructions. $349.95 AFTER
cylinders and cones • 4 Pro Scroll Blades • 4 Precision Pro Scroll BEFORE
#87637 4-In-1 Pro Model Kit with Variable-Heat Pro Power Blades • Variable-Heat Pro Power Station • Instructional DVD
Station One of the most popular foam cutting tool kits – not only • Printed instructions. $149.95

Self-Powered Economy Hot Wire Tool for Basic Foam Shaping

Hot wire slices up to 5” deep into styrene foam board up to 4” thick. Comfortable handle
has spring-loaded trigger for on-demand instant heating. Includes 2 contoured rods,
2 adjustable collars, .010” diameter wire, and 120VAC plug-in transformer.
#82104 Economy Hot Wire Foam Cutter. List $44.95 . . . Our Price $37.95
#82115 Extra .010” diameter cutting wire (4’ long) $5.95

Neolube is a water-thin graphite-alcohol

Give Dropped Parts, Pins, Topside Creeper TM solution that brushes on metal surfaces
Hardware, Tools and More Safely Extends Your Reach smoothly and levels perfectly without
Use the Topside Creeper in your work- streaking. When the alcohol evaporates, a
“The Finger!” shop, garage and train room to easily thin, tough, dark matte gray coating is left
access hard-to-reach locations. The behind that works like a dry lubricant, a
heavy-gauge steel frame, slip-resistant metal blackener and an electrical conductor
steps and thickly padded cushion all in one. It is ideal for creating a more
provide the comfort and stability you prototypical appearance and it improves
need to safely complete your projects. electrical contact. 2 fl. oz jar includes in-cap
Adjusts from 48” to 72” high. Base is brush. (Ships by ground to 48 contiguous U.S. only)
31” wide x 56” long x 6-1/2” thick. #83181 Neolube $22.95
Powder-coated to resist corrosion and
scratching. Capacity: 400 lbs. Overall
NEW MODEL Handy Paint Masks for
size is only 24” x 31” x 56” when folded. AVAILABLE! HO Wheel Sets Keep Treads
Includes convenient tool pouch,
protective bumpers and locking and Hands Clean
casters. Some assembly required.
Topside Creepers ship direct from the factory
to 48 contiguous United States only. Folds to a compact
This plier 15% restocking fee on all returns.
24” x 31” x 56”
weighs #83876 Topside Creeper for easy storage!
1/3 lb. List $332.25 . . . Our Price $279.95
NEW! #90052 Topside Creeper NXT. Folds flat for easy storage, adjusts from 48” to 64”
high, “I” base for more flexible positioning, and more! List $450.00 . . . Our Price $349.95
With an amazing 1 pound of pull, the
powerful magnet of “The Finger” allows Make your own rotating signs, machinery, railroad
you to pick up and hold any small ferrous Animation Motor Brings turntables, moving figures and other special
metal object with ease and control. Put Dioramas, Model Railroads effects that will set your project apart from any
the natural dexterity of your fingertip to others. 2” diameter x 1” long lifetime-lubricated,
work for you as you retrieve tiny metal
and Other Projects to Life high-torque 120VAC gearmotor has a .275”
parts dropped in otherwise inaccessible (7 mm) diameter x 5/8” (16 mm) shaft that turns
places; start a variety of fasteners where no at a constant 2.5 rpm. Linkages attach easily to Precision-cut masks fit 33” and 36” Walthers
other tools can go; pick up dropped pins 1/8“ (3.18 mm) cross hole in shaft. Includes Proto, Life-Like and Proto 2000 HO scale
and nails without a scratch; and so much convenient mounting flanges and 6’ cord with wheel sets. Set of 2 masks. Assembly required.
more! Every shop needs an extra Finger! on/off switch. Stall torque: 6 in-lbs minimum. #86225 Acrylic Paint Mask for HO Scale
#88374 “The Finger” Magnet Tool $11.95 #82090 Animation Motor. List $29.95 $24.95 Wheels (package of 2) $21.95

96 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 Scientific Model Kits, Scenic Accessories and Building Materials Add Interest and Excitement to Dioramas, Layouts & More!
#89545 HO Scale Protestant Church Consider yourself blessed with this HO scale laser-cut basswood early American
Protestant Church kit on your layout or diorama. These were and are examples of God’s dominion throughout cities and
countrysides of America. Much as most towns had a railroad, they had houses of worship as well. This kit features
Tichy windows and accessories. Footprint: 5” x 5”. $57.95
#89546 HO Scale Parson’s Home Usually the Pastor of a Protestant Church would have a dwelling nearby so he
wouldn’t have to travel far for his congregation. This basswood HO scale laser-cut Gothic Revival Style Victorian House can
highlight your layout. Many of these houses existed as a Sears kit to be purchased from a catalog to build yourself.
Now it is available for you to build on your own street and in your own neighborhood, just smaller. $62.95

Finished models shown.

Vehicles and accessories available separately.

#89413 HO Scale Willard’s Service Station Fuel Up at Willard’s Service Station. This HO laser-cut basswood structure Painted and
with a 4” x 5” footprint can tune up your layout. After Henry Ford made it affordable to drive, these fueling and service finished models shown.
stations popped up all over the American landscape. These early-to-mid-20th-century buildings can also be found Additional accessories including telephone
abandoned or repurposed for a modern feel. This kit features Tichy gas pumps and windows. $49.95 poles, Just Plug lighting and more available separately.
#89572 HO Scale Rural Billboard Set Display your custom ads with this HO scale laser cut Rural Billboard Set. Made
from basswood and micro-density board, these sturdy billboards will accent any highway or rural road. Just print your ad
artwork and slide it into the interchangeable slot for a fresh new look on your layout or diorama. Set of 2 billboards. $19.95

#89819 HO Scale Parking Bumper Stops Roll on up to these HO scale

resin 3D-designed Parking Bumper Stops. Every modern parking
lot must possess these in order to assure realism. Carefully
designed to replicate the standard concrete-poured
bumper stops that we use every day. This
20-pack can be painted white,
yellow or blue to identify
#89564 HO Scale Neighborhood Sidewalks
their use and add
Pave your neighborhood with these easy, no-assembly,
purpose to your HO
Vehicles, #89547 HO Scale Neighborhood Picket Fence laser-cut wide- and narrow-width sidewalks. Each section
layout or diorama.
Fence your neighborhood yard perimeter with this is over 200 HO scale-feet long in 2.5 and 5 HO scale-foot
scenery, etc. $14.95
are not included. Pkg. of 20 Stops simple, no-assembly, laser-cut HO scale picket fence. widths. Includes two corner sections for each. All sections
100 HO scale-feet long and 4 HO scale-feet tall. $10.95 feature realistic seams and curb details. $14.95

All pieces enlarged You Need Them and Fire Hydrants These exceptionally detailed, 3D printed Fire Hydrants belong on
to show detail. Now We’ve Got Them! every street from the suburbs to the cities, residential hamlets to industrial meccas.
These double-sided basswood Corner Posts Simply remove them from their sprues and add some paint to bring them to life.
are nearly impossible to make without a Choose N, HO, or O scale, Classic style (left) or Modern style (right)
specially-designed, one-of-a-kind mill, #90254 N Scale Classic Style #90253 N Scale Modern Style $17.95/pack of 18
so we did the heavy lifting for you! Use them for #89967 HO Scale Classic Style #89968 HO Scale Modern Style $17.95/pack of 10
virtually seamless joining of 1/16” and 3/32”
#50113 basswood sheets at right-angle corners in #89969 O Scale Classic Style #89970 O Scale Modern Style $18.95/pack of 10
scratch-built and kit-bashed model structures,
along with many other woodworking projects.
#89855 HO Scale Metropolitan Bike Share Bicycles
Five 24” long pieces per package.
Our custom-designed, 3D printed Metropolitan Bike
Note: use 1 /8” (#50113) for joining Share Bicycles add eye-catching realism to your
1/16” sheets and 3/16” (#50114) for modern urban landscape. These exceptionally
joining 3/32” sheets. detailed and finely proportioned bikes require only
#50113 Corner Posts, 1/8”, 5 pieces $11.95 removal from their sprues and some paint to bring
#50114 #50114 Corner Posts, 3/16”, 5 pieces $13.95 them to life. Set includes six bicycles and six-space
bike rack. No downtown scene is complete
without at least one set of these! $19.95
Scientific Makes it Easy to Add Stairs to Your Project To remove bikes and rack from sprues,
Going up or going down, these laser-cut wood Stair Stringers in we recommend our #88288 Micro
HO and O scale get you where you need to be. Don’t overlook Sprue Cutting Plier or similar.
this essential feature to any structure, especially since we’re
making it so easy for you to add stairs to your scratch-built,
kit-bashed and existing kit buildings. #89586 HO Scale Forklift Model Kit No loading dock, trackside
HO scale kit includes six stringers, 8-1/4” long; industry, freight station, warehouse or scrapyard is complete
O scale kit includes three stringers, 9” long. without one of these workhorses on the scene. This exceptionally
Each Stair Stringer Kit also includes plenty of detailed little beauty has been custom-designed and 3D resin
stripwood for making stair treads. Simply cut printed exclusively for Micro-Mark. Super-fine print rivals
treads to size for either single-width injection-molded styrene for smoothness, quality and detail.
or double-width stairs. Easy assembly; illustrated instructions included. $21.95
Note: Our #84046 Chop-It, available #88389 HO Scale Wooden Pallet Kit contains materials to
separately, is ideal for this task. assemble eight to ten+ wooden pallets, and a bonus of sixteen
#89817 HO Scale Stair Stringer Kit $14.95 2” x 4” x 8’ pieces of lumber in HO scale. A perfect match with
#89818 O Scale Stair Stringer Kit $14.95 Finished model shown. our #89586 HO Scale Forklift Kit above. $14.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 97
 Assembled and finished
model shown.

#88547
Keddie Roundhouse
Kit, HO Scale Nestled amongst the
pines on the “Feather River Route” in the Sierra
Includes all the parts Nevadas, this reflection of the Golden Age of steam has inspired us to
needed to build Alto Tower Assembled and meticulously translate original blueprints into this iconic structure. $254.95
either of these two Ways! finished models shown. #88826 Keddie Roundhouse Deluxe Kit with Turntable includes the
kit above, plus Walthers’ Cornerstone Motorized 90’ Turntable to complete
#90153 Alto Tower Kit, HO Scale Located west on 17th St. on the north side of the Pennsylvania Railroad’s the scene. Value $529.90 . . . Our Price $499.95
mainline in Altoona, PA, Alto tower still stands. Built in 1880, this tower has seen traffic through both world wars.
Since the late nineteenth century, rail traffic on the Pennsylvania Railroad has been regulated by either mechanical
or lighted signals arranged in blocks along the right of way. The signals were manually controlled by signal operators, #88717 Heavy Metal Welding & 3D Printed Traffic Cones
who were assigned to traffic towers, located along the right of way, usually adjacent to track crossovers or junctions Fabrication Shop, HO Scale #90193 N Scale $16.95/Pack of 36
of spur lines to a main line. The operators communicated with each other via telegraph, and with train crews via This small yet important #90194 HO Scale
the signals or written messages, called train orders, which were delivered to passing trains. Additional towers were laser-cut basswood $16.95/Pack of 24
often located at the entrance or exit of major yard facilities. Due to the development of electronic communications HO scale structure will #90195 O Scale
in modern time, railroads have been consolidating signal operations at facilities with automated controls. The only accent your scrap yard $18.95/
remaining active main line tower in Altoona is the Alto Tower. Servicing PRR, Penn Central, Conrail, and now Norfolk or building site scene Pack of 12
and Southern, trains pass its former glory on a daily basis. Comprised of laser-cut wood with resin and plastic on your diorama or
components, our HO scale Alto Tower Kit offers two options for construction: Late 20th Century and Early 20th layout. 2” x 2” footprint.
Century. Many aspects of this structure are meticulously measured and photographed to bring you the closest to $22.95
authentic as possible. $89.95 Assembled and finished model shown.

SPECIAL OFFER!

Assembled and finished model shown.

#88699 Pennsylvania Railroad Branch

Line Trackside Shelter Kit, HO Scale These
#89302 HO Scale Pennsylvania Railroad Standard Trackside Kit Set #88999 Standard Pennsylvania Railroad Freight Station shelters were scattered all along PRR branch
This set of kits brings together 5 essential Pennsylvania Railroad structures HO scale replica of Pennsylvania Railroad’s Spring City Freight Station on the lines from Ohio to New Jersey. This kit includes
for one great package price. Includes #89091 Trackside Frame Shop, Schuylkill River, located in the modern-day suburbs of Philadelphia. This detailed exterior framing that matches original
#89069 Brick Workshop, #88999 Freight Station, #89270 Oil House, and basswood laser cut freight house with a 7.5” x 4” footprint is a common style drawings issued by the PRR. It is a must-have
Assembled and
finished models shown. #88699 Branch Line Trackside Shelter. Value $204.75 . . . Our Price $189.95 that will represent many roads on your layout or diorama. Parts to assemble for any PRR themed layout. Footprint: 2.25”
pallets included as a bonus. $62.95 x 1.7”. $29.95

#89091 Standard Pennsylvania Railroad Trackside Frame Shop #89069 Standard Pennsylvania Railroad Brick Workshop #89270 Standard Pennsylvania Railroad Oil House
HO scale laser cut basswood kit with a 4-1/4” x 11” footprint of a Standard Frame HO scale laser cut basswood Brick Workshop with our Micro-Mark brick texture HO scale laser cut basswood Oil House with our Micro-Mark brick texture wrap
Shop. These standard wooden framed shops serviced many trackside yards across wrap to portray a mason-laid structure. A key building in any functioning rail to portray a mason-laid structure. With a 2” x 1-1/4” footprint and plaster
the United States. Designed from Pennsylvania Railroad blueprints to assure yard. With a corrugated metal roof, and 4-1/2” x 4 -1/2” footprint, this building chimney, this small but important building will add interest to a bustling yard.
accuracy. $49.95 will stand out among others with realistic accuracy. $39.95 Includes bonus 3D printed oil barrels. $24.95

Post Office Collection Boxes No street corner scene HO and O Scale Mailboxes and
is complete without them! Posts With laser cut posts and
Scenery #90192 N Scale resin 3D printed boxes, these
not included. $16.95/Pack of 18 mailboxes will spruce up the
#90150 HO Scale neighborhood theme on your
#90167 Modern-Style layout or diorama. $12.95/set
Park Benches / Railroad Platform $17.95/Pack of 12
Benches Kit, HO Scale Place them on railroad platforms, at #90191 O Scale #89271 HO Mailboxes Set of 14
bus stops, in parks, and all along the highways and byways. $19.95/Set of 6 $18.95/Pack of 8 #89272 O Mailboxes Set of 7

98 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 AVAILABLE IN HO, N & O SCALE!

Assembled and
finished model shown.

#88920 Corn Crib Kit, HO Scale This laser cut basswood

and lazerboard kit will accent any farm scene on your HO Assembled and finished HO scale models shown.
layout or diorama. 2.5” x 1” footprint. $29.95
#88347 HO Haybarn $24.95 #88828 Rural Farm Structures, Deluxe Set of 4 Kits, HO Scale The farm on your layout is incomplete without this collection of rural farm
#88346 HO Toolshed $19.95 buildings. This haybarn, toolshed, horse stable and outhouse are must-haves to create your realistic layout. These kits include clapboard siding,
Assembled and finished high-quality shingles from Northeast Scale Lumber, and the realism to take your layout to the next level. Value $87.80 . . . Our Price $74.95
model shown. Forklift #88345 HO Outhouse $12.95
not included. #88485 HO Horse Stable $29.95 #88348 Rural Farm Structures, Set of 3 Kits, HO Scale includes the haybarn, toolshed and outhouse. Value $57.85 . . . Our Price $54.95
N Scale Kits #89699 N Haybarn $24.95 #89965 N Toolshed $14.95 #89697 N Outhouse $9.95 #89700 Set of All 3 N Scale Kits $39.95 NEW! #89772 N Stable $18.95
O Scale Kits #89086 O Haybarn $44.95 #89090 O Toolshed $39.95 #89269 O Outhouse $19.95 #89301 Set of All 3 O Scale Kits $99.95

A. #88670 Griffin’s Sail Shop Kit, HO Scale Catch the Tradewinds

A Assembled and finished with finely crafted sails by Griffin’s Sail Shop. This 2-1/2 story laser-cut
models shown. basswood HO scale structure kit blows the competition away and is sure
#88389 Wooden Pallet Kit, HO Scale This basswood B to impress all of the seamen dockside. Footprint: 6” x 5.5”.
laser cut kit contains materials to assemble 8 to 10+ $47.95 (Dock not included)
wooden pallets, and a bonus of sixteen 2” x 4” x 8’ pieces
of lumber in HO scale. $14.95 B. #88549 Reynolds Rigging Shop Kit, HO Scale Reynolds Rigging
Shop, and many others like it, were scattered up and down the
New England Coast in the golden age of nautical travel and
transport. This laser-cut basswood kit is the
C perfect addition to any maritime scene.
$34.95 (Dock not included)

C. #88417 Old Hook Eye’s

Bait Shop Kit with Dock, HO Scale
HO and O Scale Picnic Tables This laser cut basswood Captain Hook Eye always has a yarn to
picnic table kit would be a nice touch to accent any park or share. So, visit him for a story of his
neighborhood scene on you layout or diorama. Designed #88827 Wharf District, tales as a skipper or just to purchase
from life-size instructions. Easy to build in minutes. Set of 3 Kits, HO Scale includes #88670 Griffin’s Sail Shop, bait for your maritime expedition at
#88549 Reynolds Rigging Shop and #88417 Old Hook Eye’s Bait Shop with Dock. Value $135.85 . . . Our Price $119.95 his HO scale laser-cut basswood
#89148 HO Picnic Tables Set of 18 $14.95
BONUS! Set includes our #88398 Telephone Pole Kit plus 145’ of black “wire.” Note: only #88417 includes dock. bait shop and dock. $29.95
#89149 O Picnic Tables Set of 9 $14.95
#88398 Telephone Pole Kit, HO Scale
#88418 Tunnel/Portal and Retaining Wall Set, NOW IN O
Samuel Morse invented the telephone pole after trying to
HO Scale These retaining walls and tunnel portal far
surpass the realism of plastic. So there is a light at the
put the wires underground, which did not work. So now we SCALE!
see them everywhere. If your layout is without these, an
end of your tunnel to improve realism for your layout or
important aspect of realism is missing. Laser cut basswood
diorama. $29.95
telephone/power poles kit includes 12 poles, 24 cross arms
Finished and and 2 transformers. $12.95
weathered barriers shown. #88829 HO Scale Telephone Pole Kit Bulk Pack includes Assembled
120 poles, 240 cross arms, 20 transformers and 145’ of black and finished
#88392 Concrete Jersey Barriers, HO Scale “wire.” Value $129.50 . . . Our Price $89.95 model shown
Cast in plaster to simulate the “real deal,” each package with optional
#89089 Telephone Pole Kit, O Scale includes 10 poles,
contains 10 pieces which cover 100 scale feet. $12.95 wire.
20 cross arms and 2 transformers. $19.95
#89089K O Scale Telephone Pole Kit Bulk Pack includes
120 poles, 240 cross arms, 20 transformers and 145’ of black Assembled and
finished model
“wire.” Value $213.45 . . . Our Price $179.95 shown. Grass
#88419 Black “Wire” for Telephone Poles, 145’ $13.95 not included.
#88393 Concrete #88429 6’ Picket Fence, HO Scale With over 100 feet in
Retaining Walls, HO Scale scale length, this simple basswood laser cut kit will add
Finished example shown. 4 cast plaster pieces make a 50 scale complexity to your suburban or rural scene. $12.95
Includes portal tunnel and 2 retaining walls. foot run of 12’ high retaining wall. $9.95
#88477 6’ Picket Fence, O Scale $14.95

Model Structure Builder’s Super Value Package 25’ scale elevation. Locomotive and track
not included. Assembled and finished
Build model structures like a pro model shown.
with this all-in-1 set.
Package includes:
• #60304 Magnetic Gluing Jig • #84046 Chop-It
• #83261 Thin-Beam Square • #60299 Angle Setter/
Protractor • #14421 2-Sided Center Finder Ruler, 12”
• #60699 4-Piece Stainless Steel Mini Tweezer Set
• #82147 Mini Square, 3” x 4” • #33108 12-Piece Swiss
Pattern Needle File Set • #60103 Solid Brass Mini Bar
Clamps, 7” Long (Set of 2) • #60348 Micro Hand Drill
• #26104 20-piece Micro-Size Drill Bit Set with Index,
#61 – #80 • #14351X2 No. 2 Knife Set with 2 No. 2
Blades • #14345 7-piece #11 Micro Saw Set #88523 Wooden Railroad Trestle Bridge Kit, HO Scale If you need to cross a
• #81471 4-piece Micro Sanding Wand Set. valley or just cart some coal out of your mine on your HO scale model layout, this
laser cut 16.5” basswood wooden trestle bridge will span your gap. Designed from
#88643 Model Structure Builder’s Super Value Package
authentic blueprints for realism and cut specifically to build with ease. $39.95
Value $221.30 . . . Super Buy $199.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 99
 NEW ITEMS MODEL TRAINS MODEL KITS

Micro-Mark is your “HOME” for structure

kits, scenic accessories and so much more!

Starbucks® Coffee Capital One Bank Modern Office Building Walmart® Supercenter Modern Strip Mall Security Finance® KFC® Restaurant
Customcuts By Summit Customcuts By Summit Customcuts By Summit Customcuts By Summit Customcuts By Summit Building Customcuts By Summit
Laser-Cut Multimedia Kit Laser-Cut Multimedia Kit Laser-Cut Styrene and Laser-Cut Styrene Laser-Cut Styrene Customcuts By Summit Laser-Cut Styrene
#89645 HO Scale $94.95 #89562 HO Scale $144.95 Acrylic Model Kit and Acrylic Model Kit and Acrylic Model Kit Laser-Cut Styrene Kit and Acrylic Model Kit
#89015 HO Scale $124.95 #89011 HO Scale $104.95 #89010 HO Scale $154.95 #89021 HO Scale $27.95 #89014 HO Scale $84.95

#90278 Arckit® 100 M² Architectural Building Model Kit

Kit includes: 188 Arckit pieces (architectural building blocks), 22
Domino’s® Pizza CVS™ Pharmacy Taco Bell® Restaurant Exxon™ Gas Station & Summit Motel Modern City Fire Station Old Dominion
reusable Arckitexture decals (including white louvres, light timber, Restaurant Customcuts By Summit Customcuts By Summit Convenience Store Customcuts By Summit Customcuts By Summit Broom Co.
dark brick and vegetation), 35 Arckit cardboard pop-outs (including Customcuts By Summit Laser-Cut Styrene Kit Laser-Cut Styrene Kit Customcuts By Summit Laser-Cut Styrene Kit Laser-Cut Styrene Bar Mills Models
figurines, trees and furniture), introductory booklet with instructions Styrene Model Kit #89017 HO Scale $134.95 #89215 N Scale $67.95 Styrene & Acrylic Kit #89216 N Scale $99.95 and Acrylic Model Kit Laser-Cut Multimedia Kit
for 1 design, and a reusable box for components. $157.95 #89214 N Scale $31.95 #89013 HO Scale $104.95 #89012 HO Scale $157.95 #89920 HO Scale $59.95 #89529 N Scale $62.95
Features: Alternative building design instructions are available
online, as well as printable Arckitexture decals and Arckit inspiration;
Arckit Digital components are also available to build via SketchUp
and Revit platforms. Recommended for ages 12 and up.
Search “ARCKIT” at micromark.com to see more kits!
Jerry’s Small Engine Rep. Tower At Water Tower Hinkle’s Package Store 4th Street Bail Bonds Mooney’s Plumbing Saulenas Tavern
Bar Mills Models Cranberry Yard at Cranberry Yard Bar Mills Models Bar Mills Models Bar Mills Models Bar Mills Models
Laser-Cut Multimedia Kit Bar Mills Models Bar Mills Models Laser-Cut Multimedia Kit Laser-Cut Multimedia Kit Laser-Cut Multimedia Kit Laser-Cut Multimedia Kit
#89530 HO Scale $47.95 Laser-Cut Multimedia Kit Resin/Multimedia Kit #89343 S Scale $39.95 #86618 HO Scale $79.95 #89341 S Scale $144.95 #89342 S Scale $104.95
#89531 O Scale $77.95 #89532 HO Scale $64.95 #89823 HO Scale $57.95

HO & O Scale ZOMBIES!

Random packages of hand-painted zombie figures “Pizza Land” Pizzeria Sunset Motel
add frightful fun to dioramas, railroads and more! Blair Line LLC Blair Line LLC Clark Oil Gas Station Yard Cafe / Hiway Café Shotgun House, 3-Pack A To Z Used Cars Drive-In Theater
Laser-Cut Wood Kit Laser-Cut Wood Kit Blair Line LLC Blair Line LLC Blair Line LLC Blair Line LLC Blair Line LLC
#90175 HO Scale Zombie Figures, pack of 5. $14.95 #89581 N Scale $28.95 #89832 N Scale $41.95 Laser-Cut Wood Kit Laser-Cut Wood Kit Laser-Cut Wood Kit Laser-Cut Wood Kit Laser-Cut Wood Kit
#90181 O Scale Zombie Figures, pack of 6. $31.95 #89582 HO Scale $33.95 #89833 HO Scale $64.95 #89654 N Scale $33.95 #89577 N Scale $34.95 #89579 Z Scale $44.95 #89573 N Scale $37.95 #89575 N Scale $21.95
#89583 O Scale $59.95 #89578 HO Scale $39.95 #89580 N Scale $44.95 #89574 HO Scale $47.95 #89576 HO Scale $26.95

Grillin’ & Chillin’ Sunny Days Double Decker Gas Station Kit Rural Sawmill Kit Pharmacy Standard Water Tank Kate’s Colonial Home Overlook Hotel Gugisberg & Sons
Trailer Trailer Trailer Woodland Scenics Woodland Scenics Woodland Scenics with Pump House Atlas® Downtown Deco Machining
Woodland Scenics Woodland Scenics Woodland Scenics Cast-Metal Kit Cast-Metal Kit Cast-Metal Kit American Model Builders Plastic Model Kit Hydrocal Model Kit Downtown Deco
Built & Ready Structure Built & Ready Structure Built & Ready Structure #70111 HO Scale $24.95 #70131 HO Scale $12.95 #70109 HO Scale $22.95 Laser-Cut Wood Kit #89653 N Scale $31.95 #88130 HO Scale $89.95 Hydrocal Model Kit
#88172 HO Scale $64.99 #88173 HO Scale $64.99 #88174 HO Scale $64.99 #89706 N Scale $29.95 #86480 HO Scale $84.95

The Boobie Hatch Strip Old Anderson Place Blair Avenue Part Two Worst Block In Town Trackside Tavern “The Atomic Cafe” Von Eerie’s Restaurant Front Street Building Downtown Alleyway Factory Building
Club Downtown Deco Downtown Deco Downtown Deco Downtown Deco Downtown Deco Downtown Deco Downtown Deco Flats Flats Flats
Hydrocal Model Kit Hydrocal Model Kit Hydrocal Model Kit Hydrocal Model Kit Hydrocal Model Kit Hydrocal Model Kit Hydrocal Model Kit Downtown Deco Downtown Deco Downtown Deco
#89533 N Scale $34.95 #86444 HO Scale $74.95 #86478 HO Scale $54.95 #86555 HO Scale $59.95 #86268 HO Scale $41.95 #87351 N Scale $31.95 #88135 N Scale $34.95 Hydrocal Model Kit Hydrocal Model Kit Hydrocal Model Kit
#89534 HO Scale $49.95 #86269 O Scale $67.95 #87352 HO Scale $41.95 #88134 HO Scale $37.95 #86298 HO Scale $72.95 #86812 HO Scale $62.95 #86297 HO Scale $47.95
#89535 O Scale $74.95 #87353 O Scale $74.95 #88136 O Scale $79.95

150’ Truss Bridge with 200’ Double Track 200’ Parker 150’ Pratt 150’ Laced Portal 150’ Through Truss 150’ Pratt Truss Bridge, Signal Bridge 30’ Single-Track Warren-Style Truss
Walkways & Railings Truss Bridge Truss Bridge Truss Bridge Truss Bridge Bridge, Gusseted Girders Punchplate Girders Bachmann Through Girder Bridge Bridge
Central Valley Central Valley Central Valley Central Valley Central Valley Central Valley Central Valley Plastic Model Kit Walthers Cornerstone Bachmann Plasticville®
Plastic Model Kit Plastic Model Kit Plastic Model Kit Plastic Model Kit Plastic Model Kit Plastic Model Kit Plastic Model Kit #84060 HO Scale $19.95 Plastic Model Kit Ready-to-Use Structure
#89563 N Scale $29.95 #86332 HO Scale $104.95 #87387 HO Scale $62.95 #86333 HO Scale $39.95 #86482 N Scale $29.95 #86335 HO Scale $39.95 #86334 HO Scale $39.95 #84061 O/S Scale $27.95 #90239 HO Scale $19.95 #89910 N Scale $21.95

Interlocking Tower Country Grain Elevator Pickle Packers G.R. Dill & Sons Loading Dock Interior Factory Backdrop Coopers Alley Grimsby Station Southside Hotel York Industries
LASERKit LASERKit & Condiments LASERKit ITLA Scale Models ITLA Scale Models ITLA Scale Models ITLA Scale Models ITLA Scale Models ITLA Scale Models
Laser-Cut Wood Kit Laser-Cut Wood Kit LASERKit Laser-Cut Wood Kit Laser-Cut Wood Kit Multimedia Model Kit Multimedia Model Kit Multimedia Model Kit Multimedia Model Kit Full Flat Structure Kit
#81586 HO Scale $29.95 #86558 HO Scale $79.95 Laser-Cut Wood Kit #86341 HO Scale $117.95 #88997 HO Scale $16.95 #86404 HO Scale $135.95 #86810 HO Scale $189.95 #86405 HO Scale $174.95 #86809 HO Scale $244.95 #88996 HO Scale $137.95
#81588 O Scale $57.95 #86342 HO Scale $127.95 #86137 O Scale $157.95

100 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 MODEL KITS MODEL TRAINS Follow us on NEW ITEMS

Old Weathered Barn Letters, Parcels & Post Lubener’s General Store Harrison’s Hardware H&H Feed Mill Emilio’s Restaurant Corner Emporium Buzz’s Sawmill J.W. Cobbler Deuce’s Bike Shop
Woodland Scenics Woodland Scenics Woodland Scenics Woodland Scenics Woodland Scenics Woodland Scenics Woodland Scenics Woodland Scenics Woodland Scenics Woodland Scenics
Built & Ready Structure Built & Ready Structure Built & Ready Structure Built & Ready Structure Built & Ready Structure Built & Ready Structure Built & Ready Structure Built & Ready Structure Built & Ready Structure Built & Ready Structure
#88119 N Scale $64.95 #87978 N Scale $51.95 #87230 N Scale $84.95 #87233 N Scale $64.95 #87345 N Scale $84.95 #87228 N Scale $62.95 #87238 O Scale $114.95 #86813 HO Scale $69.95 #87236 HO Scale $69.95 #87227 O Scale $167.95
#88118 HO Scale $89.95 #87976 HO Scale $79.95 #87231 HO Scale $72.95 #87234 HO Scale $74.95 #87346 HO Scale $114.95 #86639 HO Scale $79.95 #87237 O Scale $134.95
#88117 O Scale $164.95 #87977 O Scale $114.95 #87232 O Scale $129.95 #87347 O Scale $219.95 #86640 O Scale $159.95
NEW KIT CORNER – for details, visit micromark.com

Piggyback Ramps Modern Shopping Brick Post Office Vintage Dairy Queen Modern Suburban American Bungalow Run-Through Smith Brothers TV & Carver’s Butcher
Walthers Cornerstone Center II Walthers Cornerstone Walthers Cornerstone Station with Single Car Garage Locomotive Appliance Store Shoppe
Plastic Model Kit Walthers Cornerstone Plastic Model Kit Plastic Model Kit Walthers Cornerstone Walthers Cornerstone Maintenance Shed Woodland Scenics Woodland Scenics
#86245 HO Scale $29.95 Plastic Model Kit #88636 HO Scale $39.95 #86764 N Scale $32.95 Plastic Model Kit Plastic Model Kit Hotel Backdrop Rail Town Built & Ready Structure Built & Ready Structure
#89239 HO Scale $32.95 #86458 HO Scale $26.95 #89648 N Scale $37.95 #89774 HO Scale $41.95 Laser Art Plastic Model Kit #90309 N Scale $64.95 #90306 N Scale $54.95
Laser-Cut Multimedia Kit #90457 N Scale $69.95 #90310 HO Scale $79.95 #90307 HO Scale $84.95
#87846 HO Scale $100.95 #90458 HO Scale $79.95 #90311 O Scale $164.95 #90308 O Scale $119.95

DQ Grill & Chill 2-Story Frame House Two-Car Garage Donut Shop Modern Coaling Tower Watchman’s Shanty
Walthers Cornerstone Walthers Cornerstone Walthers Cornerstone Walthers Cornerstone Walthers Cornerstone 6-Pack
Kelly’s Café Mel’s Drive-In Brick Millworks Earl’s Oil
Plastic Model Kit Plastic Model Kit Plastic Model Kit Plastic Model Kit Plastic Model Kit Tichy Train Group
Lunde Studios Moebius Models® Walthers Cornerstone Bar Mills Models
#86765 N Scale $27.95 #86460 HO Scale $32.95 #87778 HO Scale $15.95 #86053 HO Scale $26.95 #86336 HO Scale $57.95 Plastic Model Kit
Resin Model Kit Plastic Model Kit Plastic Model Kit Laser-Cut Multimedia Kit
#86459 HO Scale $37.95 #89476 HO Scale $37.95
#90010 N Scale $40.95 #89716 HO Scale $39.95 #90275 HO Scale $44.95 #90466 S Scale $79.95

Honest
Joe’s
Rocky Pt. Lighthouse Truck Dump UP Style Depot 2-Story House & Garage American Bungalow Merchants Row I Steve’s Music Store Shady Grove Texaco Ramones Storage Pawn
Walthers Cornerstone Walthers Cornerstone Walthers Cornerstone Walthers Cornerstone Walthers Cornerstone Walthers Cornerstone Atlas® O Hillside Bar Mills Models & Salvage & Loan
Plastic Model Kit Plastic Model Kit Plastic Model Kit Plastic Model Kit Plastic Model Kit Plastic Model Kit Structure Kits Laser-Cut Multimedia Kit Downtown Deco Bar Mills Models
#86518 HO Scale $61.95 #86457 HO Scale $28.95 #86242 HO Scale $41.95 #87777 HO Scale $42.95 #74346 HO Scale $29.95 #87225 N Scale $32.95 Plastic Model Kit #90460 HO Scale $37.95 Hydrocal Model Kit Multimedia Kit
#90188 O Scale $69.95 #90461 O Scale $59.95 #90303 HO Scale $149.95 #90459 HO Scale $67.95

Diamond Coal Corp. Row House Pella Depot Kit Trackside Post Office Winner’s Circle Petro 130’ Brick Diesel House
Substation Apartment Complex Wilson’s Gas & Go American Hardware
Walthers Cornerstone Walthers Cornerstone Walthers Cornerstone Walthers Cornerstone Walthers Cornerstone Walthers Cornerstone
Woodland Scenics Under Demolition Atlas® O Hillside Supply
Plastic Model Kit Plastic Model Kit Plastic Model Kit Plastic Model Kit Plastic Model Kit Plastic Model Kit
Built & Ready Structure TomyTec Structure Kits Walthers Cornerstone
#86821 HO Scale $41.95 #86182 HO Scale $26.95 #86338 HO Scale $37.95 #87226 HO Scale $41.95 #86339 HO Scale $32.95 #86921 N Scale $47.95
#89794 N Scale $64.95 Plastic Model Kit Plastic Model Kit Plastic Model Kit
#89795 HO Scale $109.95 #90197 N Scale $34.95 #90187 O Scale $69.95 #89650 N Scale $57.95

High Voltage Modern High Voltage Vintage Ford Modern Cold Storage Diesel House Buzz’s Sawmill
Transmission Towers Transmission Towers Auto Dealership Warehouse Walthers Cornerstone Woodland Scenics Chadwick City Miss Molly’s Diner
Walthers Cornerstone Walthers Cornerstone Walthers Cornerstone Walthers Cornerstone Plastic Model Kit Plastic Model Kit Tower Trust 30’ Single-Track Woodland Scenics
Plastic Model Kit Plastic Model Kit Plastic Model Kit Plastic Model Kit #88349 HO Scale $89.95 #86370 HO Scale $54.95 Lunde Lunde Through Girder Bridge Built & Ready Structure
#89210 HO Scale $25.95 #89211 HO Scale $22.95 #89649 HO Scale $37.95 #88339 HO Scale $57.95 Studios Studios Walthers Cornerstone #89948 N Scale $55.95
Resin Model Kit Resin Model Kit Plastic Model Kit #89949 HO Scale $95.95
#90008 N Scale $79.95 #90009 HO Scale $89.95 #90239 HO Scale $19.95 #89950 O Scale $170.95

Windmill Lubener’s General Store Country Store Deuce’s Bike Shop Woodland Station Harrison’s Hardware
Woodland Scenics Woodland Scenics Expansion Woodland Scenics Woodland Scenics Woodland Scenics Monroe Corp. Snailways Bus Depot Olson House Dominant Jeans
Built & Ready Structure Plastic Model Kit Woodland Scenics Plastic Model Kit Plastic Model Kit Plastic Model Kit Lunde Studios Lunde Studios Lionel Lionel
#87229 HO Scale $21.95 #85869 O Scale $84.95 Plastic Model Kit #85875 O Scale $74.95 #89539 N Scale $29.95 #85871 O Scale $84.95 Resin Model Kit Resin Model Kit Ready-to-Use Structure Ready-to-Use Structure
#85874 O Scale $89.95 #89540 HO Scale $47.95 #90011 HO Scale $79.95 #90012 N Scale $79.95 #89806 O Scale $39.95 #89805 O Scale $119.95

Park
Place
Humble Home Victorian Cottage Maple Leaf Cemetery Lunde Heron Ltd. Falcon Tower Brick Ranch House Cape Cod House Merchant’s Row VI Big Tatz Ink
Woodland Scenics Woodland Scenics Woodland Scenics Studios Lunde Studios Lunde Studios Walthers Cornerstone Walthers Cornerstone Walthers Cornerstone Lionel
Plastic Model Kit Plastic Model Kit Multimedia Model Kit Resin Model Kit Resin Model Kit Resin Model Kit Plastic Model Kit Plastic Model Kit Plastic Model Kit Ready-to-Use Structure
#89541 HO Scale $19.95 #89542 HO Scale $24.95 #89096 HO Scale $49.95 #89810 N Scale $54.95 #88915 HO Scale $67.95 #88916 HO Scale $84.95 #89652 N Scale $26.95 #89651 N Scale $24.95 #90169 HO Scale $44.95 #89804 O Scale $89.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 101
 SUPPLIES MODEL TRAINS MODEL KITS
Architectural Parts Assortments HO Scale 3D Roof Shingles Realistic Palm Trees for Dioramas and Layouts
by Tichy Train Group Microform Model’s paintable scale metal palm trees are made of
tin-based alloys to create miniature, exact scale replicas for model
#71034
builders, architects, engineers, and interior and set designers.
Microform Model’s metal parts are more durable and easily
paintable when compared to plastic or cardboard model parts.
Available in 4 different sizes…mix and match sizes for a more
natural, realistic effect. Finished trees shown. Packs of 2 or 3 only.
#85848 #88164X2 9-1/2” Metal Palm Trees, pack of 2 $16.95
#88165X3 7-1/4” Metal Palm Trees, pack of 3 $12.95
#88166X3 6-1/2” Metal Palm Trees, pack of 3 $12.95
#88167X3 5-1/2” Metal Palm Trees, pack of 3 $12.95
#85848 #85849
A wide variety of exceptionally detailed Three-dimensional laser-cut shingles, pre- HO Scale 3D Roof Shingles
parts for constructing model buildings. weathered and factory-assembled into in NEW Shapes and Colors!
Includes detailed illustrations to help you a 3” x 7-1/2” sheet. Attach to your roof
select the right parts for your project. Laser cut paper roofing shingles allow you
sheathing with glue and trim to size. to achieve a wide range of looks. 9” x 12”
#86934 164-piece N Architectural Parts Includes 2 sheets. Choose from 2 styles sheets offer limitless flexibility with easily
Assortment includes multiple pieces of below. $23.95/pkg. removable rows that can be used by them-
21 different windows, 12 different doors, #85848 Gray Random selves, or even cut into individual shingles! #88168 #88169 #88170
6 different architectural parts, plus pre-cut #85849 Charcoal Choose from 3 styles shown. $20.95/pkg. Tab Style Shake Style Fish Scale
window glazing. List $38.00 . . . $34.95
#86935 80-piece N Scale Door & Window Gatorfoam – The Multi-Purpose Building Material Preferred by Professional Modelers
Assortment includes one sprue of every Professional model builders prefer Gatorfoam to wood for fabricating structures, streets or
door and window style Tichy makes. sidewalks, retaining walls, tunnel portals, bas-relief buildings and backdrop effects, and
$17.95 more. Gatorfoam has a 1/32” thick wood-fiber veneer called Luxcell that is laminated with
#71034 200-piece HO Architectural Parts waterproof adhesive to both sides of a polystyrene foam core. The resulting 3/16” thick
Assortment includes multiple pieces of panel is strong, light-weight and warp-resistant. Gatorfoam cuts easily with a modeler’s
10 different doors, 43 different windows knife or with miniature power saws. Its smooth finish is compatible with all types of paints
and 36 different architectural parts. and adhesives, and self-stick textured building papers adhere perfectly. Gatorfoam holds
List $40.00 . . . Our Price $35.95 up against the elements and won’t delaminate with exposure to rain, so it can be used
in exterior structures for garden railways and in dollhouse construction. Available from
#71034G Glazing Pack for #71034 Micro-Mark in convenient size panels. SOLD IN PACKS OF 3 ONLY.
Includes pre-cut clear plastic glazing for all #83263X3 Gatorfoam 12” x 18” x 3/16” thick panel; brown veneer/white core $20.95/pkg. 4 to 10 $19.45/pkg. 10+ $18.20/pkg.
windows and doors included in the parts
assortment above. $9.95 #83863X3 Gatorfoam 12” x 18” x 3/16” thick panel; black veneer/black core $23.95/pkg. 4 to 10 $21.95/pkg. 10+ $19.95/pkg.

#71035 130-piece HO Architectural Parts

Assortment includes multiple pieces of Innovative Photo-Realistic Building Papers Look and Feel Like the Real Thing
11 different doors, 21 different windows Micro-Mark again leads the way with innovative building papers that reproduce not
and 10 different architectural parts. only the look, but also the texture of brick, cinder block, stone and roof shingles on a
List $28.00 . . . Our Price $26.95 scale model. Our building papers are exact scale photographs of real surfaces that have
been printed by a special process that raises the surface of each individual stone above
#71035G Glazing Pack for #71035
the “mortar” lines. No building paper or plastic sheet produced to date offers such
Includes pre-cut clear plastic glazing for all
realism! And for quick, easy application, we’ve applied a peel-and-stick adhesive to the
windows and doors included in the parts
back of the sheet. Accepts weathering powders and airbrushed colors for aging-effects.
assortment above. $8.95 Close-up of brick paper
$9.95 per package of four 6” high x 9” wide sheets
#85216 200-piece Parts Assortment for
O Scale includes a variety of injection
molded styrene doors, windows, lamp
shades, star washers, nuts, bolts, ring
washers, pallets and 55 gallon drums.
List $70.00 . . . Our Price $62.95 AGED FACTORY BRICK AGED FCTY. BRICK DETAILS RANDOM STONE* COBBLESTONE* CINDER BLOCK ROOF SHINGLES*
#84106 60-piece Parts Assortment for #84730 HO Scale #84732 HO Scale #83135 HO Scale #83405 HO Scale #83105 HO Scale #83218 HO Scale
O Scale includes same parts selection as #84731 O Scale #84733 O Scale #83136 O Scale #83406 O Scale #83106 O Scale #83219 O Scale
above, with less pieces. $27.95 *Overall rough surface. Individual stones are not raised above mortar lines and shingles are not raised above gaps.

These exceptionally detailed, flexible textured sheets from Chooch Enterprises include peel & stick backing. To use, simply cut to desired size with a scissor.

ALL SCALES ALL SCALES

Cobblestone Street Cobblestone Street Details Stone Block Wall Timber Retaining Wall Blasted Rock Wall Concrete Sidewalks
4” x 12.5” $14.95/pkg. $14.95/pkg. 3.25” x 13” $14.95 ea. 3.75” x 12” $14.95/pkg. $13.95/pkg. and Sidewalk Details
#86424 Small Stones (N & HO) #87220 Small (N & HO) 3.75”x11.75” #86421 Small Blocks (N & HO) #87398 .075” Board Width #87888 Rock, 3.6” x 11.5” 3.75” x 12” $14.95 ea.
#86425 Medium Stones (HO) #87221 Medium (HO) 3.75” x 11.75” #86422 Medium Blocks (HO) #87399 .115” Board Width #87889 Limestone, 3.5” x 11.5” #89161 Concrete Sidewalks
#86426 Large Stones (HO & O) #87222 Large (HO & O) 4” x 11.75” #86423 Large Blocks (HO & O) #87400 .135” Board Width #87890 Sandstone, 3.75” x 17.5” & Details, N Scale
#89162 Concrete Sidewalks,
HO Scale
2 SHEETS PER PKG. #89163 Concrete Sidewalks,
Large, O Scale
#89164 Flexible Sidewalk
All-Scale Coal Load Random Stone Wall Cut Stone Wall Shake Roofing Sea Details, HO Scale
#89165 Flexible Sidewalk
4” x 13” $19.95/pkg. $14.95 ea. $14.95 ea. 3.75” x 12” $14.95/pkg. Wall Details, O Scale
#86411 Small Granules #85227 N & HO scale, 3.50” x 13” #85230 N & HO scale, 3.40” x 13” #87395 Small (N & HO) $14.95 ea.
#86412 Medium Granules #85228 HO & O scale, 3.25” x 14” #85231 HO & O scale, 3.40” x 13.25” #87396 Medium (HO) #87202 Medium (HO) 1.25” x 11.75” See more Chooch products
#86413 Large Granules #85229 HO / O / G scale, 3.50” x 13” #85232 HO/O/G scale, 3.50” x 13.75” #87397 Large (HO & O) #87203 Large (HO & O) 1.75” x 11.5” at micromark.com

102 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 Follow us on MODEL TRAINS SUPPLIES HAND TOOLS POWER TOOLS
Static KingTM makes it easy to model large grassy areas and ensures
Scenery makes the difference! static grass is applied vertically. The Static King has an ergonomic
See our website for ready-made design and can be placed upside down for easy filling. It comes
trees, clump foliage, turf, with different sieve sizes for creating a varied effect using 2
to 12 mm lengths of Static Grass. A divider allows the use
details and more! of multiple colors and
sizes at the same
time for modeling
realistic fields
and other
tall grasses.
Static Grass Grass-colored fibers that tend to stand up when applied to scenic terrain.
Truly realistic! 1 quart shaker bottles. $11.95 ea.
#82361 Wild Honey #82362 Harvest Gold #82363 Burnt Grass
#82364 Light Green #82365 Medium Green #82366 Dark Green

#88638 Woodland Scenics® Static King™

Make Static Grass Applicator $99.95
Great Looking
Tree-Scapes and #88677 Woodland Scenics® Model-Vac™
Model-Vac™ has the ideal suction velocity to
Save 75%! pick up loose landscape materials and debris
OURS Theirs while leaving your layout’s glued items behind.
Plus, Model-Vac is easy to empty and won’t dam-
Tree-covered landscapes made with our poly fiber are more dramatic and more realistic age excess material, making it suitable for reuse
than those made with olive-colored fiber. Just pull out tufts of fiber and dip into #85043 after collection. Though designed primarily for
Scenery Cement. Dust on some turf and instantly have great looking tree tops to glue to use on model railroad layouts, this ergonomic
your mountainside. Our fiber is knot-free, so it’s easy to pull out a tuft. Ounce-per-ounce, cordless vacuum is super-handy in tight areas
it saves you 75% over the cost of name brand fiber…you get over 4x the amount of and wherever standard vacuums are too big to
material for the same price. 12 oz by weight. $19.95 ea. 2 or more, same color $17.95 ea. go. Vac requires one 9V battery (not included).
#84907 Black Poly Fiber #84922 Green Poly Fiber $24.95

Slow-Motion Switch Tender is Quiet, Dependable, Easy to Install Rail Nipper Track Cutter Cuts Track Clean and Square
The Switch Tender, mounted under the layout,
uses a quiet, slow motion 12VDC gearmotor and Our rail nipper makes short work of making clean, flush
a simple, easy-to-install linkage to gently throw cuts through model railroad track up to code 140.
the switch…no special wiring required! The Spring-loaded steel jaws are hardened for a lifetime
Switch Tender is so easy to install, you’ll have of rail-cutting. Thick rubber handles are
your whole layout upgraded in no time. Designed comfortable to use.
for use with all scales of model trains. #86461 Rail Nipper
Switch Tender includes motor, mounting bracket, Track Cutter $19.95
linkage for before or after track installation, hard- 3 or more
$15.95 ea. Note: Picture shows
ware, wiring diagrams and instructions. Overall
height: 2.200” (55.88 mm). Overall length: 2.640”
the correct way to cut rail.
(67.06 mm). Overall width: 1.040” (26.42 mm).
Current draw at 12VDC: 0.025a while running; NMRA Gages Assure Trouble-Free
0.060a when stalled. #83201 $18.95 ea.
Buy 10 – 24 Buy 25 – 99 100 or more
Operation of Your Model Railroad
$15.95 ea. $14.95 ea. $13.95 ea. These gages help you to make adjustments to rolling stock
and track to end annoying derailments. They’ll check for
#83257 Three-pole, double throw miniature toggle switch for activating Switch Tender accurate track and switch dimensions, wheel spacing, flange
FLANGEWAYS
and routing switch frog polarity. $5.95 ea. 10 – 24 $4.95 ea. 25 or more $3.45 ea. depth, tire width and wobble. Gages also check for structure
PO
O
-G

IN
NO

TS

STANDARDS
clearance so trains can pass without hitting tunnel portals,
The Ultimate Manual Turnout Control GAGE station platforms, scenery, etc. These are precision stainless
WHEELS

steel measuring instruments manufactured by the National

The Blue Point Switch Machine is easy to install and is FLANGEWAYS
HO SCALE
Model Railroad Association. Instructions included.
PO
IN
TS

actuated by a simple push rod to your layout’s fascia. The COUPLER

STANDARDS
GAGE
HEIGHT
#80752 #80753 #84632
WHEELS

adjustable throw rod holds the switch points in positive

contact with the running rails to prevent derailments.
N SCALE
MARK IVb
TRACK
HO Scale Gage N Scale Gage O Scale Gage
A DPDT snap-action toggle switch inside the compact TRACK
$19.95 $19.95 $26.95
plastic housing changes electrical connections to the
turnout frog to prevent stalling of locomotives. Wiring Track Inspection Cars Find Trouble Spots
your layout is simplified, because no electrical power is The crystal clear floor of the car gives you
required to throw the switch. For use with all track the best view of wheelset movement
gauges N through O. Dimensions: 1-1/4” wide x 1-3/8” through switches, around curves, and at
deep x 2-3/8” high. (Order linkage below.) Blue Point Switch rail joints, allowing you to quickly detect HO
Machines are available in 1, 5 and 10-packs the location of problem spots which can
#83425 #83426 #83427 hamper the smooth operation of your
1-pack 5-pack 10-pack trains. Easily in a few minutes. Includes
$15.95 $67.95 $121.95 trucks, hardware and instructions.
#82414 HO Track Inspection Car with
metal wheels $15.95 N
#84715 Flex Link Starter Kit has everything #82120 N Track Inspection Car with
you need to connect and operate one Blue plastic wheels and couplers $14.95
Point Switch Machine (not included) with
fascia push/pull knob. Includes all hardware,
36” long Flex Link plastic tubing, bracket and Black Micro Nails Holder for
instructions. $14.95 for Model Railroad Track Micro Nails
#84718 Flex Link Bulk Pack 5 of the above #70209 1/2” long, approx. 300 $7.95
Value $57.50 . . . Our Price $54.95 #70210 3/4” long, approx. 300 $7.95 #70218 $3.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 103
 MODEL TRAINS Follow us on

Just Plug TM Lighting System are on and eliminates the need for a building interior. Includes 1 Diffusing Film (white
material) 6” x 36”, 1 Window Tint (dark material) 6” x 36”, 256 Micro Sticky Spots™
The Just Plug Lighting System by Woodland
(repositionable) and instructions. W.S. #JP5715. $15.95
Scenics is a complete, quick and easy way to add
realism and interest to new and existing layouts #86277 Light Block Kit keeps light inside a structure, where it belongs. Includes
and other projects. No special tools or electrical 1 Masking Paint (1 oz), 2 Black Ribbon Putty (1/8” thick x 1/4” wide x 4’ long) and
knowledge is needed. Just plug and you’re done! instructions. W.S. #JP5716. $15.95
Individual bulb brightness can be controlled, HO & N STREET LAMPS AND WALL-MOUNTED LIGHTS
and the modular design allows for easy expan- Each Street Lamp/Wall Light item below INCLUDES warm white
sion. See our website for additional details and images. LEDs, Linker Plug and instructions. Each uses only 1 Light Hub
#86273 Lights & Hub Set Add lights to any port per set. To operate as designed, each item below REQUIRES
project. Use the individual dimmer controls to a Just Plug Light Hub (#86274) and a Power Supply (#86283 ).
regulate light brightness. Includes* 1 light hub Wooden Pole Street Lights Use to light depots, rail yards,
and 2 warm white LED stick-on lights with 24” alleyways, sidings, parking lots and more. Set of 3 lights.
cables. W.S. #JP5700. $19.95 #86598 HO $24.95 #87658 N $23.95 #86598
#86274 Light Hub Use the Light Hub to add up Arched Cast Iron Street Lights Use to light city streets, side-
to 4 lights to your project. Includes* 1 Light Hub walks, downtown areas, parks, bridges and more. Set of 3 lights.
and 4 Connecting Cables (48” each). W.S. #86599 HO $24.95 #87659 N $23.95
#JP5701. $15.95 Double Lamp Post Street Lights Use to light street corners, sidewalks, parks and
#86275 Expansion Hub Use the Expansion Hub more. Set of 3 lights. #86600 HO $24.95 #87660 N $23.95
to connect up to 4 Light Hubs. Includes* Lamp Post Street Lights Use to light street corners, residential walkways, parks and
1 Expansion Hub. Light Hubs and Connecting more. Set of 3 lights. #86601 HO $24.95 #87661 N $23.95
Cables sold separately. W.S. #JP5702. $14.95 Gooseneck Wall Mount Lights Use on business structures, outbuildings, billboards,
#88123 Sequencing Light Hub Add up to four Just Plug lights that individually signs, docks and more. Set of 2 lights. #86606 HO $13.95 #87662 N $12.95
sequence on and off. Includes dimmer and speed controls. Turn sequencing off to use Entry Wall Mount Lights Use on homes, business entryways, garages and more. Set
as a Light Hub. Add an optional Auxiliary Switch for convenient operation. Includes* of 2 lights. #86607 HO $14.95 #87663 N $13.95
1 light hub. W.S. #JP5680. $21.95
#88128 Linker Plugs Use to plug in remotely located Street Lights and Wall-Mount
*Each item above INCLUDES 1 CTRL port plug installed, 1 double-sided mounting tape Lights. Set of 6. W.S. #JP5685. $9.95
(1” x 2-1/2”), 2 mounting screws and instructions.
#88129 Splicer Plugs to quickly reconnect wires after installing LEDs into discreet,
Each item above REQUIRES 1 Just Plug Power Supply (#86283, below) to power up to small holes. Set of 12. W.S. #JP5686. $4.95
50 lights. To power the system from your layout, see #86281 Connecting Cables below.
#86281 Connecting Cables connect Expansion Hubs to Light Hubs, Expansion Hubs
See our website for O scale versions of the items above
to Expansion Hubs and/or connect any Hub to train power pack or DCC system.
Includes two 48” cables. W.S. #JP5760. $6.95 Just Plug and Done!
#86282 Extension Cables extend the length of any Just Plug Cable. Includes two These vehicles add light and
48” cables. W.S. #JP5761. $6.95 interest to layouts without the
need for electrical knowledge,
#86283 Power Supply The transformer powers up to 50 lights and connects to Light
wiring, or soldering. Each
Hub or Expansion Hub. Includes 1 Power Supply with 48” cable and instructions.
vehicle includes 4 LEDs
W.S. #JP5770. List $19.99 . . . Our Price $14.95
(2 warm white headlights and NOW IN
#86278 Auxiliary Switch Rocker style on/off switch plugs into Light Hub and Expansion 2 red taillights) plus a driver
Hub ports. Includes 1 Auxiliary Switch with 48” cable, mounting tape, mounting screws figure. See our website for details. O SCALE!
and instructions. W.S. #JP5725. $8.95
HO Scale $27.95 each
#88127 Extension Cable Kit Use with Extension Wire to create custom lengths of Just O Scale $47.95 each
Plug Cables. Reach Hubs anywhere on your layout or project. W.S. #JP5684. $6.95
#88124 Port Sharing Device Use with a Light Hub or Sequencing Light Hub to add up
to 4 Stick-On or Nano LED Lights per light port. W.S. #JP5681. $8.95
#86279 Stick-On LED Lights plug into Light Hub and are adhesive-backed for easy Vehicle Name HO Item # O Item # Vehicle Name HO Item # O Item #
installation. Warm white color. Pkg. of 2 with 24” cable on each. W.S. #JP5740. $8.95
Green Pickup 86641 88289 Comfy Cruise 86645 88293
#86280 Nano LED Lights plug into Light Hub and are small in size, big in brightness.
Midnight Ride 86642 88290 Station Wagon 86646 88294
Warm white color. Package of 2 with 24” cable on each. W.S. #JP5743. $8.95 Police Car 86643 88291 Fancy Fins 86647 88295
#86276 Light Diffusing Window Film diffuses light evenly throughout when lights Heavy Hauler 86644 88292 Downtown Drive 86648 88296

High Intensity Accessories for LED Light Strips (See our website for details and specifications)
LED Lighting for Confined Case may vary.
Spaces and Special Effects
A

B
#85501 #85502

#85501 6 amp 12VDC Power Supply. #85553 2.1 mm Barrel Plug to screw
C Powers up to 5 meters of LED strip terminals adapter. Package of 5. $8.95
lighting. Includes 2.1mm plug.
List $39.95 . . . Our Price $34.95 #85554 2.1 mm Barrel Jack to screw
Our high intensity peel-and-stick LED (Light-Emitting-Diode) strips illuminate places terminals adapter. Package of 5. $8.95
regular lighting fixtures can’t. Each flexible strip is only 10 mm (3/8”) wide, and is supplied #85502 33 amp 12VDC Power
in a 5 meter (16 foot) reel that contains 300 LEDs spaced on 16.72 mm (5/8”) intervals. Supply. Powers up to 27 meters of #85500 Strip-to-strip Connector. Butt
Just use a scissor to cut the reel into shorter strips…a safe cutting location is marked LED strip lighting. joint with clips. Package of 10. $4.95
after every three LEDs. Low voltage (12VDC) electrical requirements make wiring quick List $74.95 . . . Our Price $69.95
#85503
and easy. Note: Our LED light strips use high-output SMD5050 LEDs that out-perform #85498 Connector with 5” flying leads. Dimmer for
cheaper versions. Includes one 2.1 mm barrel jack installed on end of reel. Electrical Clips on cut ends of strip. $4.95 LED strip lighting.
requirements: 12VDC; 1.2 amps per meter. See our website for full specifications. 5 or more $4.25 each 8 amp capacity for
A. – C. List $59.95 . . . $27.95 per reel #85499 Strip-to-strip Connector with up to 6 meters of
A. #85496 B. #85633 Neutral/ C. #85497 5” leads between clips. $4.95 strip lighting.
Bright White (5000k) Natural White (4200k) Warm White (2800k) 5 or more $3.95 each $8.95

104 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 MODEL TRAINS SUPPLIES HAND TOOLS NEW ITEMS
#90452 Rail Town HO Scale Electrical
HO Scale 70’ Spherical The Long-Awaited Truck Spreading Plier is Here!
Water Tower Kit Pickup Bettendorf Manufactured to precise tolerances, these hand-ground, individually
Realistic details on this Caboose Trucks produced pliers are designed to slip between opposite ends of the
plastic model kit include: wheel axle and backside of truck journal boxes when the jaws are
entry door, mounting nuts around nearly closed. A special compression spring offers just the right
the base flange, and a flashing red amount of resistance when you squeeze the plier, gently spreading
LED light that can be powered by the truck journals apart and causing the wheel set to effortlessly
any track power source. Decals include slip from the truck. Re-installation of the wheel set is just as easy.
“No Trespassing” sign, window, and Great for use with our Truck Tuner, available separately below!
door handle. Molded in sky blue. For HO standard gauge trucks only.
9-3/4” tall (approx. 70 scale feet) #87936 HO Truck Spreading Plier $24.95
#86527 Kadee® No. 590 HO Trucks, with
Available in multiple
etched-bronze axle wipers and electrical
styles and N scale!
lead wires, pick up electricity from the rails
$22.95
to light cabooses, improve electrical pickup #87936K HO Truck Tuner & Truck Spreading Plier Set These two tools work perfectly
from locomotive tenders, or add auxiliary together – get them now for one low price! List $50.90 . . . Our Price $37.95
pickups for sound systems. These trucks
are molded with High Gravity Compound Truck Tuner Makes ‘em Really Roll
(HGC), which results in truck weight that
Our Truck Tuner reconditions your HO gauge
approaches pure metal for excellent track-
railroad truck bearings so cars roll smoother with
hugging traction. One pair. $26.95
less friction. Simply insert the tool in place of a
wheelset and rotate the shank. Truck Tuner’s
Grain-of-Wheat and Grain-of-Rice Lamps for Model Projects extra-sharp tool-steel cutter reshapes the bear-
ing to the NMRA’s recommended 60° contour
and cleans out burrs and grime. Repeat for all
bearings and your car is ready to really roll.
Increases train lengths that locomotives can pull
by up to 20%! For HO standard gauge trucks only.
#82838 HO Truck Tuner $22.95
Adhesive foam pads on
the back of the housing let Mini Peel & Stick LED Lamps Mount to
#82590-4C #83155 you stick a lamp anywhere Almost Any Surface
you need it…in model
Grain-of-wheat size (1/8” dia. x 3/8” long) bulbs are packed in a 100-piece bundle to save structures, cars, boats,
you money. 12-14v. AC/DC, .075 amp. 6” leads. List $49.95/pkg. Our Price $39.95/pkg. planes, trucks, dollhouses.
#82590-4C Grain-of-Wheat Bulbs, 4 Colors (clear, red, green, amber; 25 each) Grain-of-wheat size clear
Grain-of-rice size (3/32” dia. x 3/16” long) lamps are specially manufactured for LEDs glow with a bright
Micro-Mark with a 12V, 30ma rating so they can be wired directly to the function outputs white color. Overall size:
of model railroad DCC decoders without fear of electronic overload or plastic-melting 1/2” diameter x 3/4” high,
heat generation (with proper mounting and ventilation). Made of high-grade glass, plus 12” leads for easy
with long-life filaments and durable 6” leads. Of course, they can be used for all types of hook up. Includes integral
micro-lighting applications. 40 lamps per package. $49.95/pkg. resistor for LED operation.
Works on 8 to 16 volts DC. Sticks best to smooth surfaces. Package of 20 lamps.
#83155 Grain-of-Rice Lamps, Clear (pkg. of 40)
#86557 Peel & Stick LED Lamps (package of 20). List $39.95 . . . Our Price $26.95
#83156 Grain-of-Rice Lamps, 4 Colors (clear, red, green, amber; 10 each)
Note: Lamps require a power source. If not powered by layout connection, we recommend the optional items below.
#85501 6 amp 12VDC Power Supply. List $37.95 . . . Our Price $24.95
Transform Rough-Running Locomotives into Smooth #85554X1 2.1 mm adapter for use with LED Lamps and Power Supply above $1.95
Performers with Our Premium Quality Flat Can Motors #89217 12V/1.5A Wall Adapter for #86557 Peel & Stick Lights. Features 2.1 mm x 5.5 mm
High-torque permag motors feature 3-pole, balanced armatures and oil-impregnated female center-positive output connector, U.S. and European input clips. $14.95
bronze sleeve bearings for smooth #86529
starting and low-speed #86546 Mini Connector Kit
running. Narrow profile for Model Electronics
“flat can” design easily Kit makes it easy to disconnect motors,
fits into small spaces. lights and other circuitry located inside
Compatible with models. 2-wire miniature connector
either straight #84694 bodies are only 3/16” x 1/4” x 3/8” long
DC or DCC systems. when joined. Connector halves snap
See our website for full specifications and diagrams. together to prevent accidental parting.
#86529 Flat Can Motor Style 2430. CLOSEOUT! ONLY $9.95 Each connector assembles in just a few
#86546 Flat Can Motor Style 2025. List $19.95 CLOSEOUT! $9.95 minutes. Includes 7” wire leads and heat-
Connectors are small enough to fit shrink tubing to prevent shorts. Requires
#84694 Flywheels (2) for #86529 and #86546 motors $13.95
just about anywhere! the use of a wire stripper and soldering
iron. 4 amp capacity. Package of 10.
Soft-Touch Cradles for Modelers #83858 Mini Connector Kit
Soft foam holds gently yet securely, protecting Value $25.95 . . . Our Price $15.95
locomotives and rolling stock from damage
while you paint, add details, assemble, apply Micro-Miniature Connectors
decals, repair and weather even your most Fit in the Smallest Spaces
#86612
delicate models. Cleverly designed central groove
Use these Micro Connectors to make electrical
holds projects at the optimal angle to see and
connections inside tight spaces. Supplied
work on every side of the model easily, comfort-
in strips of 32 pins on 0.100” spacing, you
ably and safely. Available in HO/O and Z/N scale.
#80784 just snip off the amount you need, then
#86612 HO/O Cradle $8.95 2 or more $7.95 ea. solder on your lead wires. We also include
#86614 Z/N Cradle $7.95 2 or more $6.95 ea. the heat-shrink tubing to insulate and protect
#80784 Original Soft Touch Cradle’s two different lead wire connections.
size “wells” hold HO and N scale models; keep See our website for more information.
small tools close at hand while you work. #86559 Micro Connector Set $18.95
$14.95 3 or more sets $14.45/set
Stackable

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 105
 HAND TOOLS MODEL TRAINS
Track is a Model, Too. So, Use the Very Best! Deluxe HO Track Laying Tool Set
Micro Engineering track is good looking, curvable and accurately gauged for top-notch These unique and useful tools can help you
performance. Nickel-silver rail provides good electrical contact, has the appearance of have a quieter, smoother rolling layout
steel, and resists corrosion. Ties are molded of a tough engineering polymer in realistic without annoying derailments.
brown or concrete colors and include simulated spikes or rail clips plus tie plates for #84114 HO 7-piece Deluxe
ultimate detail. All Flex Track is 36” long and sold in bundles of 6 pieces. Micro Engineering Track Laying Set $34.95
Turnouts (track switches) include DCC-friendly points, insulated cast-metal frog, and
7-piece Set Includes…
snap-action throwbar. See our website for our full selection of rail joiners and spikes.
SUPER BUY SUPER BUY Ballast Parallel
Item # Gauge Description Code* Price/bundle 3 or more bundles Spreader Tool
#86826 N Flex Track 55 $37.95 $27.95/bundle
#86824 N Flex Track, Weathered 55 $37.95 $29.25/bundle
LE
AB #86827 N Flex Track, Concrete Ties 55 $37.95 $27.95/bundle
CURV #86825 N Flex Track 70 $41.95 $32.75/bundle
#86823 N Flex Track, Weathered 70 $39.95 $31.95/bundle
#83443 On30 Evenly distributes ballast Maintains 2” spacing for
track #86832 Any Rail (33 pieces) 70 $64.95 N/A between rails and on sides. two parallel tracks.
#85246 HO Flex Track 70 $39.95 $28.95/bundle
Track Soldering
#86235 HO Flex Track, Weathered 70 $41.95 $30.95/bundle Cutting Tool
#83694 HO Flex Track 83 $42.95 $32.95/bundle Tool
#83694
HO track #85494 HO Flex Track, Weathered 83 $41.95 $30.95/bundle
#85431 HO Flex Track, Concrete Ties 83 $39.95 $28.95/bundle
#83443 On30 Flex Track 83 $49.95 $36.95/bundle Provides a straight edge for Prevents plastic ties from
#83697 Any Rail (33 pieces) 83 $69.95 $53.95/bundle cutting track squarely. melting while soldering.
#84793 O Flex Track 100 $57.95 $44.95/bundle Flex Track Alignment
#84794 O Flex Track 125 $74.95 $50.95/bundle Tool
#84795 O Flex Track 148 $77.95 $52.95/bundle
#84793 Code 100 #84794 Code 125 #84795 Code 148 Straightens
SUPER BUY
Item # Gauge Description Code* Price each flexible track section
while nailing it to the roadbed.
#86830 N #6 Turnout, Left-Hand 55 $24.95
#86831 N #6 Turnout, Right-Hand 55 $24.95
#86828 N #6 Turnout, Left-Hand 70 $24.95
Radius Tool
#86829 N #6 Turnout, Right-Hand 70 $24.95 Consists of two radius bars that
#85247 HO #6 Turnout, Left-Hand 70 $26.95 let you draw curves from 7” to 23” radius in
#86719 #85248 HO #6 Turnout, Right-Hand 70 $26.95 half-inch increments.
Midwest
#83695 HO #6 Turnout, Left-Hand 83 $26.95
Products® HO
Cork Roadbed #83696 HO #6 Turnout, Right-Hand 83 $26.95
Caboose Industries Manual
is lightweight, cuts and #83444 On30 #5 Turnout, Left-Hand 83 $31.95
shapes easily, and offers excellent sound
Turnout Controls
#83445 On30 #5 Turnout, Right-Hand 83 $31.95
absorption. Beveled edges on each piece #83763 HO 5202S
*Rail height in thousandths of an inch 5-pack $16.95
enhance realism when ballasted. Package
of twenty-five 3/16” x 1-3/4” x 36” pieces. Track Gauges for Hand-Built Track #86837 Track Gauge for Code 55 #83765 HO & N 5218S
$39.95/pkg. 3-point design with grooves to hold rail in perfect #86836 Track Gauge for Code 70 5-pack $16.95
gauge while spiking by hand. $7.95 ea. #83699 Track Gauge for Code 83

SEE OUR WEBSITE FOR ATLAS AND BACHMANN TRACK! 2-in-1 High-Precision
Miniature Digital Level
The Best Tools for Handlaying Track Carpenter
Measures grades
We not only improved our already great spiking plier, but designed a spike levels are just
removal plier as well. Add our rail cutter, and you’ve got a set of tools that too clumsy for
will make handlaying smooth model railroad track a pleasure instead of a measuring
chore. Pliers are custom-made in the USA to our specifications by Xuron. model railroad
A. #82839 Spike Insertion Plier is manufactured with special dies that track grades
form perfect T-shaped grooves in the jaw faces. Spikes nestle perfectly into and superele-
A C
these grooves, and only a gentle squeeze of the handles is needed to hold vation. So, we
them securely. The nose is specially contoured to push spikes home without encased our
slipping off and damaging the railhead or ties, and the comfortable grips high precision
A let you spike for hours without fatigue. Your trackwork will be smooth and digital level in
trouble-free. Works with all brands and gauges of spikes Z – O. $24.50 Measures superelevation a compact
B. #82840 Spike Removal Plier has special die-formed jaws that grip spike housing that’s
heads securely and make removal easy. Just grab spike head and pull. $22.55 only 2” square
C. #80337 Rail Cutting Plier cuts brass and nickel-silver rail so clean and by 1” deep. At
B square you’ll need virtually no touch-up work with a file. Works on rail up the press of a
to code 100 (.100” high). $19.95 button, the
#82865 Custom-tailored Canvas large LCD reads
Tool Pouch holds two Spiking Pliers the percent
B and one Track Cutter. $9.95 grade from
sea level. Embedded magnets attach it
#84366 securely to cast-iron/steel surfaces for
hands-free measurement. Range: 0 to
C 45˚/100%. Readability: 0.05˚/0.01%. Hold
button remembers last reading. Housing
SPECIAL OFFER! Buy the two Spiking Pliers and the Track
made from durable CNC-machined,
Cutter together, and get a Canvas Tool Pouch for FREE!
satin-finish alloy. Includes 9V battery and
#84366 Tracklaying Tool Set includes one each of above auto shut-off battery saver.
nos. 82839 (A), 82840 (B), 80337 (C), plus pouch. $69.95 #88448 Starter Track Plans
For Model Railroaders $16.95 #84519 Digital Level $49.95

106 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 MODEL TRAINS SUPPLIES HAND TOOLS Follow us on

3M Scotchlok “Suitcase Connectors” Eliminate the

Stripping and Soldering of Under-Layout Wiring
Dubbed “Suitcase Connectors” by expert
railroad modelers, these Insulation
Displacement Connectors (IDCs) let you
connect track feeder wires to main bus
(power supply) wires without having to #84022 Suitcase #84023 Suitcase #84109 Suitcase
strip or solder. Simply place the connector Connectors (IDC #905 Connectors (IDC #567 Connectors (IDC #558 #84039 Scotchlok Crimping Tool
over the wires and crimp the metal tab Red) for bus sizes #14-18 Brown) for bus sizes #10-12 Pink) for bus and feeder This premium-quality crimping plier
with pliers. The tab pierces the insulation (max insulation OD .145”) (max insulation OD .190”) sizes #16-22 (max eliminates the hand-cramping fatigue
and locks the wires together. Snap the with feeder sizes #18-22 and feeder sizes #14-18 (max insulation OD .120”). caused by using regular pliers on big wiring
lid shut, and you’re done! Our IDCs are (max insulation OD .110”). insulation OD .145”). Package of 25. jobs. Includes interchangeable jaws for use
top-quality 3M Scotchlok brand. Package of 25. $9.95 Package of 25. $14.95 $12.95 with a variety of connectors. $119.95

#88453
A B C Wiring Your
Model Railroad,
by Larry Puckett
This is the first
wiring book any
modeler should
#83524 buy, and is a great
reference guide
for experienced
#84231
modelers as well.
128 pages.
$21.95

D E F

Bends
pins up…

…or down
Railroad
Modeler’s Deluxe Tool Chest
A great selection of tools for a wide variety
Checks knuckle height Checks pin height of model building tasks. Set includes: 6”
stainless steel rule, 2 needle files, razor
A. HO Scale E-Z Mate® Magnetic Knuckle Couplers Improve Your Model Railroad’s Performance saw, sanding stick, swiss hammer, snap
E-Z Mate Mark II Couplers are made of brown engineering plastic with steel trip pins and bronze coil springs in the knuckles for long knife, needle nose plier, swivel head pin
life. Compatible with all brands of knuckle couplers. Medium-length centered shank fits the coupler boxes of most cars. vise, slotted and Phillips head miniature
#83525 HO Scale E-Z Mate Coupler Standard Pack (12 pair). $27.95 screwdrivers, 3 drills, #1 knife handle, #5
knife and razor saw handle, aluminum miter
#83526 HO Scale E-Z Mate package of 25 pair. List $52.00 . . . Our Price $41.95
box, 3 knife blades and fitted wooden chest.
#86919 N Scale E-Z Mate Couplers, package of 12 pair. List $33.00 . . . Our Price $27.95
#81501 Railroad Modeler’s Deluxe Tool
#83524 HO Scale Under-track Magnetic Uncoupler sticks to bottom side of track with double-sided tape (included). Couplers Chest. List $96.55 . . . Our Price $76.95
“spotted” over magnet uncouple automatically. Includes scale figure to mark its location. Package of 6. $39.95
#86920 N Scale Under-track Magnetic Uncoupler includes 1 N scale uncoupler magnet and 1 figure. $9.95
Kadee® Coupler Assembly Fixture #84231 HO Scale Fixture $7.95 See our website for our full selection of HO & O scale Kadee couplers.
B. Uncouple Model Railroad Cars Anywhere Without Damage to Delicate Details Push
Our surgical stainless steel uncoupling tool slips effortlessly between coupler knuckles, then uncouples and gently moves cars away
from each other with a simple twist of the fingers. Works on HO and On30 scale couplers, including Kadee, E-Z Mate, Intermountain,
Hammer
and standard horn-hook train set couplers. Includes protective storage wallet. #80972 HO Uncoupling Tool $6.95 3 or more $5.50 ea. Drives a
C. Laser Cut Coupler Shims are a Real Time-Saver Nail with
Our laser-cut coupler shims are made of .025” thick insulation-grade compressed paper and are an exact fit for popular makes of HO One Push
and O scale coupler pockets, including McHenry, Kadee, Weaver and Intermountain. They’re easy to install and can be trimmed to fit
tight locations. #84905 HO Coupler Shims (75) $18.95 #84906 O Coupler Shims (60) $19.95
D. Coupler Gauge Prevents Derailments and False Uncoupling of Trains
#82824 Coupler Gauge for HO Standard Gauge and Bachmann On30 $11.95 A fantastic tool that drives tiny, hard-to-hold
E. Special Plier Adjusts Coupler Trip Pins nails in places an ordinary hammer head
won’t fit! Magnetized plunger holds nail
Adjust your Kadee and Bachmann E-Z Mate trip pins the easy, accurate way. Just place the pin between the jaws and squeeze. How
until you’re ready to push. Works on all steel
hard you squeeze determines how far you’ll bend the pin. Bends pins up or down. Plier is stainless steel with box joint construction.
nails up to 1-1/4” long x 5/32” head dia.
#80600 Trip Pin Plier For HO and O $12.95 #80892 Trip Pin Plier For N $12.95
#86272 Push Hammer $14.95
F. Reduce Stress with the “Grabber” for Kadee and E-Z Mate Coupler Springs #70209 Model Railroad Nails, 1/2” long
End unnecessary frustration and time lost searching for those tiny “fly away” springs! Our “grabber” holds, inserts and removes Kadee (pkg. of 300) $7.95
and other micro springs with ease. Made of surgical quality stainless steel with a specially forged tapered ball end. 4-1/4” long. You’ll #70210 Model Railroad Nails, 3/4” long
wonder how you got along without it! #81029 Spring Grabber $8.95 (pkg. of 300) $7.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 107
 NEW ITEMS MODEL TRAINS

Super Buys!
HO Bachmann HO Baldwin 4-6-0 Bachmann Denali Express Train Set
HO

52” Drivers
N Bachmann N ALCO 4-6-4 Bachmann N Siemens SC-44 Charger DCC-Ready
Hudson Steam Locomotive N List $299.00 . . . Super Buy $229.95
#74721 Baltimore & Ohio® No. 1357
#74722 New York Central No. 1238 #74780
#74723 Texas & Pacific™ No. 316 HO, Ready-to-Run
List $359.00 . . . Super Buy $300.95
Econami™ Soundtraxx® DCC-Equipped DDC WOWSound®-Equipped HO Bachmann Spectrum HO
List $439.00 . . . Super Buy $400.95
List $439.00 . . . Super Buy $399.95 2-10-0 Russian Decapod On30
Bachmann On30 0-6-0
#74696 New York Central No. 5405 (Gothic Lettering) #74757 Amtrak® Pacific Surfliner® (WSDOT) No. 2116
Steam Locomotive
#74697 New York Central No. 5426 (As Delivered)
HO Bachmann HO SC-44 Charger
N Bachmann Spectrum N EM-1 Diesel Electric Locomotive

DDC WOWSound®-Equipped
List $549.00 . . . Super Buy $409.95
Econami™ Soundtraxx® DCC-Equipped #74563 ATSF No. 2456
DDC WOWSound®-Equipped DCC-Equipped, Sound-Ready
List $499.00 . . . Super Buy $344.95 #74564 Erie No. 2478
List $469.00 . . . Super Buy $459.95 List $409.00 . . . Super Buy $249.95
#74567 B&O No. 7602 Early Large Dome #74565 Frisco No. 1624 with Doghouse Tender
#74569 B&O No. 7623 Later Small Dome #74726 North County Transit District #74311 Three Rivers Steel No. 1
#74566 Western Maryland No. 1102
#74570 B&O No. 7628 Later Small Dome (San Diego County) “Coaster” No. 5001 #74312 Allegheny Iron Works No. 5
#74313 Midwest Quarry & Mining Co. No. 3
HO Bachmann HO Siemens ACS-64 #74314 Unlettered, Black
HO Bachmann HO ALC-42 Charger
N Bachmann N Class J 4-8-4 Diesel Electric Locomotive On30
Bachmann On30 Baldwin
Class 10 Trench Steam Engine

Econami™ Soundtraxx® DCC-Equipped

List $439.00 . . . Super Buy $314.95 DDC WOWSound®-Equipped DCC Sound Value-Equipped
#74571 Norfolk & Western No. 608 List $469.00 . . . Super Buy $459.95 List $439.00 . . . Super Buy $289.95
#74572 Norfolk & Western No. 611 #74709 Amtrak® 50th Anniversary “Day 1” No. 301 #73921 Amtrak No. 607
#73922 Amtrak No. 619
HO Bachmann HO EMD GP38-2 #73923 Amtrak No. 642
N Bachmann N GG-1 #73924 Amtrak Flag Demo DCC WOWSound®-Equipped with Chuffinity™
#74583 Amtrak No. 602 Mobility Scheme List $469.00 . . . Super Buy $289.95
#74584 Amtrak No. 668 #74578 USA No. 5001
#74585 Septa No. 905 #74579 USA No. 5091
#74580 USA No. 5153
#74581 Quartermaster Corps No. 1
HO Bachmann HO #74582 Unlettered, Black
DCC-Ready
DCC Sound Value-Equipped Acela Express® Train Set
Super Buy $157.95
List $399.00 . . . Super Buy $279.95 HO Bachmann HO Old-Time Cars
#74660 CSX® No. 2640
#73403 Pennsylvania Railroad No. 4807 #74661 Norfolk Southern No. 5314
#73404 PRR “Congressional” No. 4872 #74662 GMTX No. 2103
#73405 Penn Central No. 4853
HO Bachmann HO EMD E7-A
N Bachmann N GP40 Baggage Car
List $42.00 . . . Super Buy $29.95
#73531 #73532 #73533
W&A Pennsylvania No. Central

HO Bachmann HO Bay Window

Econami™ Soundtraxx® DCC-Equipped DCC Sound Value-Equipped
List $299.00 . . . Super Buy $259.95 List $299.00 . . . Super Buy $189.95 #74427 Caboose with Roof Walk
#74573 Union Pacific® No. 906 #73381 Pennsylvania 5-Stripe HO, DCC-Equipped, Ready-to-Run
#74574 BNSF No. 3012 #73382 Southern Super Buy $599.95
#74575 CP Rail No. 4608 #73383 CB&Q
#74576 CSX® #No. 6001 #73385 B&O
HO Bachmann HO 50’ Outside
#74577 Norfolk Southern No. 3057
HO Bachmann HO GS4 Braced Box Car With FRED
HO Bachmann HO Thomas & Friends™ 4-8-4 Locomotive & Tender List $63.00 . . . Super Buy $37.95
List $109.00 #74132 Nickel Plate
Super Buy #74133 Erie
$100.95 #74134 B&O
#74779 DCC Sound Value-Equipped #74135 Union Pacific
Toby List $399.00 . . . Super Buy $259.95 List $58.00 . . . Super Buy $34.95
The Tram #73701 Southern Pacific Railfan Daylight, No. 4449 #74141 Railbox See Our Full Selection
Engine #73702 Southern Pacific Daylight, No. 4436 #74142 Burlington Northern of Pre-Order Trains at
See our website for more Thomas & Friends #73703 American Freedom Train, No. 4449 #74145 Greenville & Northern Railway www.micromark.com!

108 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 MODEL TRAINS Follow us on NEW ITEMS

HO WalthersMainline HO HO WalthersProto HO
HO HO
EMD GP9 Phase II Locomotive EMD GP9 Phase II Locomotive

ESU® Sound & DCC-Equipped

#90112 Walthers Cornerstone® HO Urban Steel #89868 Walthers Cornerstone® HO Tire Plant Super Buy $209.95
Overpass Model Kit List $29.98 . . . Our Price $27.95 Model Kit List $79.95 . . . Our Price $74.95 #74680 Grand Trunk #4448 #74682 Kansas City
#74681 SPSF #2873 Southern #4164
HO HO
HO WalthersProto HO
EMD E9A “Preamble Express”
ESU® Sound 5 & DCC-Equipped
List $299.95 . . . Super Buy $294.95
#74685 Soo Line #2413 #74686 Penn Central #7135
DCC & #74687 Union Pacific #288
LokSound-Equipped
#89647 Walthers Cornerstone® HO Modern Long #90179 Walthers Cornerstone® HO Vehicle #74640 UP #951 Super Buy $314.95
Span Concrete Railroad Bridge Model Kit $47.95 Maintenance Facility Kit (Set of 5 Bldgs.) $47.95 HO WalthersMainline HO
Standard DCC-Equipped International Car Company
HO N
#74641 UP #951 Super Buy $209.95
Wide-Vision Caboose
HO WalthersProto HO Alco PA
Delaware & Hudson

Super Buy $37.95

#89860 Walthers Cornerstone® HO Elevated #89777 Walthers Cornerstone N Scale Oil Storage ESU® Sound & DCC-Equipped #74701 Norfolk Southern #555535
Commuter Station Model Kit $41.95 Tank Model Kit Super Buy $27.95 #74642 D&H #17 Super Buy $219.95 #74702 Boston & Maine #470

Walthers Cornerstone HO & N Scale Motorized Turntables with DCC WalthersProto HO EMD F7A-B Set #74644 Santa Fe nos. 314L & 314A Super Buy $566.95
List $349.98 each HO
HO N
Super Buy $294.95 each
#86768
HO Scale, 90’ (13-3/4” long)
#86567
HO Scale, 110’ (approx. 18” long)
HO HO WalthersMainline HO
#86767 57’ Mechanical Reefer
HO Scale, 130’ (19-1/8” long)
#86766
N Scale, 130’ (10-3/8” long) #89790
See our website for
#86567 Walthers
details and specifications SceneMaster
HO Heavy Duty
Walthers Cornerstone HO & N Scale 3-Stall Modern Roundhouse Kit Container Crane Kit Super Buy $29.95
See our website for details HO N (container not included) #74699 Pacific Fruit Express™ #456888
and specifications Super Buy $74.95 #74700 Santa Fe SFRC #55684

HO HO

#85973 HO Scale Roundhouse Kit. Houses engines up to 125 scale feet long. List $79.98 . . . Super Buy $67.95
#85974 HO Scale Roundhouse Addition Kit. List $64.98 . . . Super Buy $57.95
#86922 N Scale Roundhouse Kit. Houses engines up to 145 scale feet long. List $69.98 . . . Super Buy $62.95 #88336 Walthers HO MI-JACK Translift® #89085 Walthers Cornerstone HO UPS Hub with
#86923 N Scale Roundhouse Addition Kit. List $59.98 . . . Super Buy $52.95 Intermodal Crane Model Kit Super Buy $31.95 Customer Center Model Kit Super Buy $67.95

HO
Walthers SceneMaster™ HO Scale Vehicles are Pre-Assembled, Painted and Ready to Go on Your Layout
HO HO HO HO HO HO

#89025 #89024 #89027 #89702 #89555 #89802

UPS Package Car International® 4300 International® 7600 International® 7600 “Bel Aire Flowers” Ford Crown Victoria
#89084 Walthers Cornerstone® HO The UPS Store® Super Buy Tree Trimmer Truck Flatbed Truck 2-Axle Crew-Cab Fire Delivery Van Police Interceptor
Model Kit List $39.98 . . . Our Price $36.95 $20.95 Super Buy $20.95 Super Buy $12.95 Truck Super Buy $15.95 $19.95 $11.95

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 109
 Lionel HO Train Sets, Locomotives, Cars and Accessories Bring Over a Century of Tradition to a New Generation
With everything you need to get rolling right out of the box, Lionel HO Scale HO
Train Sets are a great way to get started in model railroading!

#74630 Lionel HO Scale “Nickel Plate Road” Fast Freight Train Set
Lionel’s Berkshire is back with all new boiler tooling for a more accurate rendition of this popular locomotive. Equipped with DCC
and Bluetooth, your train has power, sounds and control features to match this high level of detail. Super Buy $369.95

Lionel HO Scale Train Sets include: LionChief 2-8-4 steam locomotive with tender, prototypical pilot and front end details and additional
boiler details, separate handrails, Bluetooth control with included remote or app, DCC control, conventional transformer control, LED headlight,
realistic sounds activated by remote or app, volume control, powerful can motor, front and rear operating knuckle couplers. HO

#74629 Lionel Army Hospital Train Set

Supporting the numbers of wounded American heroes, hospital trains transported many to inland hospitals. Trains were
outfitted with cots, medical personnel and life-saving equipment and given top priority on the line. Many of these cars have
been preserved around the country. Super Buy $369.95

Lionel HO Scale Freight Cars feature operating knuckle couplers, free-rolling trucks with metal wheels and rugged design Super Buy $19.95 each

#74713 Lionel HO #74705 Lionel HO #74706 Lionel HO

Union Pacific Box Car No. 355230 UTLX™ Tank Car No. 78214 Reading Lines 2-Bay Hopper No. 89252

It takes more than trains and tracks to build a model

railroad! Grow your HO layout with Lionel’s assortment
of houses and buildings. Create a lifelike scene with
these realistically detailed accessories.

HO Model Kit – Assembly and Painting Required Fully Assembled and Finished Fully Assembled and Finished HO Scale Model Kits – Assembly and Painting Required
#90486 Lionel Modern Service Station Building, #89479 Lionel School House Building, #89480 Lionel Modern Fire Station Building, #89478 Lionel Jones’ HO House Model Kit Super Buy $31.95
UNDECORATED, HO Scale. $44.95 HO Scale. $74.95 HO Scale. $74.95 #89477 Lionel Church HO Model Kit Super Buy $31.95

LionelTM O Gauge Locomotives for the Discerning Enthusiast and Collector

#74703 Lionel™ Vision 2-10-10-2
Locomotive, “Valley Flyer” No. 3008,
O Gauge Super Buy $2499.95 O
O

#74776
Lionel™ Legacy® 4-12-2
Locomotive and Tender, Reading No. 560,
O Scale Super Buy $1700.95 PRE-ORDER NOW!

As part of their 75th Anniversary Flyer celebration, Lionel brings out this
deluxe freight set combining the latest Lionel technology with
the fun and nostalgia of a classic American Flyer set!

This feature-rich S
set includes a FlyerChief GP7 and
remote, operating log dump car, covered hopper,
FreightSounds boxcar, tank car and lighted caboose. The T&P ‘s
“Swamp Holly Orange” paint scheme has been an American Flyer tradition
for decades, and this set provides all you need to pass on the thrills to another generation.
#74748 American Flyer® Texas & Pacific Deluxe Freight Train Set, S Gauge Super Buy $699.95

110 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
Follow us on MODEL TRAINS NEW ITEMS
LionelTM O Gauge Locomotives for the Enthusiast and Collector

#74673 Lionel™ LionChief 2.0

AC-12 Cab Forward Locomotive and Tender,
Southern Pacific No. 4290, O Gauge Super Buy $1299.95

#74746 Lionel™ Baldwin 2-10-0 Decapod

O Strasburg No. 9 (1990s), O Scale
Super Buy $1899.95 PRE-ORDER NOW! #88815 Atlas® O Scale Turntable 24” diameter • Motor
drive included • Easy installation • Larger, more powerful
#74747 Lionel™ EMD SW1200 Penn Central motor • Cogged anti-slip drive belt • Increased deck support
No. 9020, O Scale for heavier locomotives • Redesigned metal contacts to
O Super Buy $549.95 power the rotating track • Hidden drive assembly • For 2 rail
PRE-ORDER NOW! and 3 rail use • Runs on AC or DC • Complete instructions.
List $299.95 Super Buy $294.95

O #88810 DCC Specialties

PowerPax DCC
Programming Booster
Compatible with Digitrax,
#74707 Lionel™ Legacy® Lenz, MRC, NCE, TCS
4-6-0 Camelback, New Jersey No. 770 and Soundtraxx decoders.
“Blue Comet”, O Gauge Super Buy $650.95 Super Buy $62.95
Digitrax DCC
A B C F

#87156 #87157
#89811 & #89812

D E #85360
#85338 #85349

#85350

#87449
#85351

A. Zephyr Express DCS52 Starter Set C. Throttles

Has everything you need (throttle/command station/booster) to get started in DCC for #89812 UT6D Duplex Radio-Equipped Utility Throttle. Super Buy $176.95
one great price. Runs 20 locomotives; 20 throttles; 30 functions. Includes DCS52 Command #89811 UT6 Utility Throttle. List $115.00 Super Buy $109.95
Station, PS314 Power Supply, LT1 LocoNet Cable and Decoder Tester, System Reference and
Decoder Manuals. #88641 Zephyr Express Starter Set. List $245.00 Super Buy $239.95
D. Power Supplies
#85351 PS2012E Power Supply, 20 amps, output selectable. Operate up to four 5 amp
B. EVO Evolution Advanced 5A/8A Starter Sets boosters. List $236.00 Super Buy $229.95
Everything you need to get started with Advanced Digitrax Command Control. Evolution #87449 PS615 90 Watt Universal AC/DC Power Supply, 6 Amps. Powers all Digitrax
is perfect for most home and club layouts, offering excellent speed control, prototypical Command Stations and Boosters operating at 5 amps. List $79.00 Super Buy $74.95
consisting, the full range of programming features and much more. Run up to 100 E. Accessories
addresses and 100 throttles at the same time on your system. Maximum capacity, #85360 UP5 LocoNet Universal Panel. List $18.00 Super Buy $16.95
maximum features – take it to the Max with Evolution!
#85338 AR1 Single Auto Reverser. List $33.00 Super Buy $29.95
#87156 EVO Evolution Advanced 5A/8A Starter Set includes: DCS210 Command #85349 PM42 Power Manager. List $85.00 Super Buy $79.95
Station/Booster with Intelligent AutoReverse • DT500 Super LocoNet Throttle (Infra ready)
#85350 Digitrax PS14 300 mA Power Supply, AC to DC Adapter powers many Digitrax
• UP5 Universal Panel • PS615 Power Supply • One LT1 LocoNet Cable and Decoder Test
accessories. 14VDC. Super Buy $14.95
Kit • Evolution Manual • Digitrax Decoder Manual. List $470.00 Super Buy $449.95
#87157 EVOD Evolution Advanced 5A/8A Duplex Starter Set is perfect for layouts F. DCC Installation and Programming How-To DVDs
wanting Duplex Radio control out of the box. Set includes: DCS210 Command #88458 Install A DCC System DVD. All you need to know! Approx. run time 1:27. $13.99
Station/Booster with Intelligent AutoReverse • DT500D Super LocoNet Throttle (Duplex #88456 DCC Programming Vol. 1 DVD. Model Railroader senior editor Dana Kawala
Radio) • UR92 Duplex Transceiver Panel • PS615 Power Supply • PS14 Power Supply (for walks you through many DCC programming tasks. Approx. run time 1:01. $12.99
UR92) • One LT1 LocoNet Cable & Decoder Test Kit • Evolution Manual • Digitrax Decoder #88457 DCC Programming Vol. 2 DVD. Dana Kawala shows you how to program your
Manual. List $655.00 Super Buy $629.95 locomotives for lighting, sound, and more. Approx. run time 1:11. $13.99

Expand the Reach of Your Model Empire with Digitrax Boosters

Features include: Single 3/5/8 amp AutoReversing DCC Booster (no #87390 DB210-OPTO Booster, up to 8 amps, Opto-Isolated for layouts
command station capability) • N, HO, & Large Scale Operations with with common rail wiring.
Custom Voltage Trim • LocoNet for easy plug ‘n play installation and List $179.00 Super Buy $169.95
system expansion. ALL BOOSTERS REQUIRE A POWER SUPPLY; SEE “D.” ABOVE #87391 Booster Terminal Plug, 16 amp. Specifically for DB220, but
#87388 DB210 Booster, up to 8 amps. List $159.00 Super Buy $144.95 compatible with all Digitrax Boosters and Command Stations.
#87389 DB220 Booster, up to 16 amps. List $219.00 Super Buy $184.95 Super Buy $6.95
#87389

ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 111
 Follow us on HAND TOOLS SUPPLIES MODEL TRAINS MODEL KITS
Prodigy DCC Systems Prodigy DCC Accessories
#83711
Prodigy-Advance 2 MRC’s Wireless
Prodigy-Advance is Conversion
simple enough for System
the first-time user includes
to quickly master, full-function
yet features wireless cab,
charging cable, #88918 Ring
sophisticated
rechargeable Engineering™ RailPro
functionality that battery and Model Train Control System Starter Kit
will impress the plug-in external Professional grade, powerful, and very
experienced receiver to easy to use, this Train Control System
railroad modeler. convert Starter Kit contains a handheld controller
Prodigy Express, #83711 and a power supply with enough wattage
See our website for complete details and images of all items listed below Prodigy-Advance, to run 15 typical modern locomotives. All
#83693 Prodigy-Advance 2 System includes base control unit, 3.5 amp power supply, Prodigy-Advance 2 and Prodigy Elite you need besides the starter kit is a loco-
full-function handheld cab, hook-up cables and detailed instructions. systems to wireless operation. motive module (sold separately). Set-up
List $459.98 Super Buy $294.95 List $339.98 Super Buy $219.95 takes only seconds. You can add additional
#83739 Additional Wireless Handheld power supply units, handheld controllers,
#86530 Prodigy-Advance 2 Wireless DCC System. List $629.98 Super Buy $419.95
Cab with rechargeable battery. accessory and locomotive modules to
What happens when you combine the awesome power of the Prodigy-Advance 2 System expand the starter set for control of any
List $249.98 Super Buy $167.95
with WiFi? You get the most sophisticated, user-friendly model railroad operation control size layout! Includes HC-2 Handheld
system on the market today! #83194 Extension Box. Place several Controller, Battery Charger, USB Cable,
around the edge of your layout for PWR-56 Module, PA-2 Power Adapter, 110
#87907 Prodigy-Advance 2 System with WiFi. List $549.98 Super Buy $384.95
walkaround control. Includes 10’ cable. VAC Power Cable and User’s Manual with
#87392 Prodigy WiFi Module converts your existing system to WiFi operation. Runs up List $39.98 Super Buy $31.95
to 8 smartphones or tablets. List $139.98 Super Buy $104.95 Quick Start Guide.
#82029 Auto Reverse Loop Module Super Buy $398.95
#83829 Prodigy-Advance 2 full-function handheld cab. List $142.98 Super Buy $137.95 eliminates special wiring. 5.0 amps max.
#85976 Prodigy Elite DCC System takes DCC performance to a new level of sophistication. Works with any DCC system. #88068
List $559.98 Super Buy $398.95 List $49.98 Super Buy $36.95 Digitrax
PR4 USB
See our website for a complete selection of DCC decoders for every application and Universal Cab Holster Interface
scale at prices up to 40% off list! Brands include Digitrax, Soundtraxx, Bachmann, Keep your DCC hand- and Power
Supply
MRC and more. Just type “decoders” into the search field to get started. held controllers safe
and within easy reach. switches
Our special version fits between
Miniature Chain for Model Work Atlas, CVP, Digitrax, computer interface and decoder
Micro-miniature sizes in matte-black Lenz, NCE and MRC programming modes automatically
finish for realistic looking, multi-scale Prodigy Advance/ without having to press any buttons.
use. Sold by the foot. Select from Express DCC cabs. List $95.00 Super Buy $89.95
chart below. Molded in durable
black ABS. Attaches to #86465
Mini Chain $6.95/foot your layout fascia with Soundtraxx
3 or more feet – $5.15/foot 4 screws (included). PTB-100
A B C D E 6 or more feet – $4.60/foot #84074 Universal Programming
Cab Holster $6.95 Track Booster provides the extra
Fig. Item # Material Pitch (in) Links/Inch Outside Dia. (in) Wire dia. (in) power you need to program sound
3 or more $5.50 ea.
A 85271 Brass 0.050 20 0.045 0.013 Cab not decoders, plus amplifies programming
10 or more $4.50 ea. included.
B 85272 Brass 0.062 16 0.051 0.012 instructions, and gives you visual
C 85273 Steel 0.064 16 0.084 0.020 Roller Sets Convert Any Track programming feedback via lights
included on the circuit board.
D 85274 Steel 0.115 9 0.088 0.025 into Locomotive Test Stands List $69.95 Super Buy $62.95
E 85275 Steel 0.100 10 0.110 0.028

Track Cleaners on a Stick

F G H

See our
website
for refills

#82896

#82896 HO/On30 Locomotive Rollers

Use this set of 4 mini roller sets to break in,
F. #86504 Adjustable Angle Snap & Glue Set Includes two pairs of magnetic clamps tune up and test your HO, On30 and O
that adjust to any angle between 70˚ and 180˚ to hold parts (great for roof panels) while gauge locomotives. Simply place between
you apply glue. Holds material up to 3/16” thick. $37.95 your track and the powered wheelsets of
G. Ballast Spreaders Fill bin with ballast and slide along the track for easy spreading. your engine, then turn up the power.
#86500 for HO/On30 track $20.95 List $75.00 . . . Our Price $41.95 The 3/4” dia. rubberized cleaning rod is
#86501 for O scale 2-rail track $34.95 #86502 for O scale 3-rail track $34.95 sized just right for track width in each scale
#83417 and won’t harm delicate track components.
H. #86495 Track Voltage Tester On DC-powered track, colored lights indicate the voltage O Gauge
present: low (red), medium (yellow), or high (green). On DCC-powered track, all 3 lights Three 10” long x 3/8” dia. solid aluminum
Locomotive handles screw together to a length up to
indicate the presence of voltage. For track up to HO gauge. $24.95 Rollers 30” to reach into tight spots. $20.95 each
#88773 HO Scale Cable Drums Includes
#82992 HO Gauge Track Cleaner
Kit Unpainted plastic and laser-cut contact for
wood kit assembles into 8 cable center rail. #83032 O Gauge Track Cleaner
drums on 4 pallets. $36.95 #83417 $41.95 #83033 N Gauge Track Cleaner

112 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE See our website for a video of this item in use
 MODEL KITS MODEL TRAINS SUPPLIES HAND TOOLS POWER TOOLS

Track and Wheel Cleaners for Smooth Operation and Control Locomotive not included.
The Rail Tracker cleaning tool follows the
For HO Track track and hugs the rails while you clean.
Makes it easy to clean hard-to-reach areas.
Includes everything you need to clean and
maintain your track. Package doubles as a #85259
storage tray. Order extra cleaning pads
below.
#85253 Tidy Track Eliminates tedious wheel cleaning!
Rail TrackerTM Cleaning Kit Clean locomotive and rolling stock wheels without scratching.
List $39.95 . . . Our Price $31.95 Roto Wheel Cleaner quickly cleans all wheels at one time. Powers up
Rail Tracker Refills from your transformer or track. Works with both analog (DC) and digital
(DCC) control systems. Includes 2 sets of cleaning pads and 1 set of scrubbing pads.
#85254 Rescue Pads $6.95
#85253 #85259 Roto Wheel Cleaner for HO/On30 locomotives
#85255 Maintenance Pads $6.95 up to 12” and rolling stock up to 10-1/4”. List $29.99 . . . Our Price $22.95
#85256 Cleaning & Finishing Pads $6.95 #85260 Cleaning Pad Refills for above. Contains enough material for HO gauge:
#85257 Clean Track Solution, 1.85 oz $7.95 3 sets of cleaning pads and 1 set of scrubbing pads. $8.95

Make Perfect Grab Irons Use Our Car Routing Car Weighting System
for Your Train, Aircraft, Truck System to Operate Your Optimizes and Improves
and Military Models Layout Like a Real Railroad Model Railroad Performance
With our Car Routing System and our instruction
booklet (included), you’ll learn how to use your
railroad models in a manner that truly reflects their
realism and capabilities. Our Car Routing System
is realistic, flexible, and versatile, and requires no
special equipment, such as a computer, to set up
or maintain. And it’s so widely used, many of your
visiting operators will be already familiar with it.
#82916 Car Routing System Starter Pack
Includes 100 each car cards, waybills, and
bad order slips, 25 locomotive cards, 4 three-
If you’ve ever tried to make your own grab compartment bill boxes, plus basic instructions to get your operations started. $34.95
irons by eyeballing and bending wire into
shape with a plier, you already know that Order refills and extra bill boxes below . . .
it’s almost impossible to make any two #82910 Pad of 100 Car Cards. Buff color, 2-1/8” wide x 4” high (folded). $3.95
exactly alike. Our Grab Iron Bending #82911 Pad of 100 Waybills. White color, 2” wide x 3” high, 4-cycle. $3.95
Gauge has been specifically designed to #82912X2 Pack of 50 Locomotive Cards. Gray color, 2-1/8” wide x 4” high (folded). $3.95
quickly and easily form identical, precisely- #82913X2 Pack of 200 Bad Order Slips. Pink color, 2” wide x 3” high. $5.95
sized grab irons from ordinary wire. Simply #82914 Three-compartment Bill Boxes attach to layout
clamp your wire between the gauge’s jaws fascia to hold car cards. Pkg. of 2. $15.95 #86083 Optimizing model railroad locomotive and
at the selected size and bend to shape. EMPTY CAR REQUEST car weight helps to minimize derailments,
CAR TYPE
#86083 Five-compartment Bill Boxes.
Made of laser-engraved blackened CNC-
AAR DESIGNATION
QUANTITY increase pulling traction and maximize
SHIPPER
LOCATION Package of 2. $20.95
machined steel for long life. Bends 21 sizes VIA
INSTRUCTIONS
train lengths for a dramatic gain in model
from .050” to 1.050” in .050” increments. #84019X2 Pack of 50 Empty Car Requests for train performance. System includes a
enhanced operation. 2-cycle Waybill on back. #82914 high-precision digital scale for weighing
#84745 Grab Iron Bending Gauge $49.95 Light blue color. 2” wide x 3” high. $3.95 cars, 48 self-stick 1/4 oz lead weights, and
Reorder Micro-Mark #84019

Woodland Scenics #84189 Train Order Try It Pack for advanced operation contains one pad each of #84184 a chart of optimum car weights based on
CFB Clearance Form A, #84185 CFB Form 19, #84186 CFB Form 31 and #84187 plain paper NMRA specs. Easy to use with scales N – O.
Track Painters Track Warrant. 50 sheets per pad. $11.95 See our website for individual pads/refills. Scale features 11 lb. (5 kg) capacity with
digital readout in 0.05 oz or 1 gram incre-
ments. Includes tare feature and auto
Exact-Scale Tichy HO Freight Car Kits for the shut-off to conserve power. 5” dia. platen.
Detail-Conscious Modeler...Sold in Money-Saving Bulk Packs #84016 Car Weighting System
List $46.60 . . . Our Price $39.95
#83825 Digital Scale only
List $37.50 . . . Our Price $29.95
#82330 Stick-On Weights. Package of
forty-eight 1/2” wide, 1/4 oz. lead weights
with self-stick adhesive backing. $10.95
#83673 10,000 Gallon Tank Car Kit ICC Class 103
Transform with a 60” diameter dome. Common between 1918 and
your track quickly #83675 USRA 40’ Single Sheathed Box Car Kit 1955. Bulk pack of 6. List $75.00 . . . Our Price $69.95
and easily to look as realistic Used between 1918 and 1958. Includes steel and wood Bright Bar
as the rest of your layout. Paint rails, plates doors. Bulk pack of 6. List $85.00 . . . Our Price $75.95
and spikes with rust or steel colors; paint Removes
ties a realistic matte finish. Use before or Tarnish
after installation to paint metal or plastic and Rust
track components. Works for all scales.
Includes extra tip. $9.95 ea. #83722 Pacific Fruit Express Wood Reefer Kit
#85264 Steel Rail Track Painter 1928 to 1960’s.
#84183 22’ Wooden Ore Car Kits Common between
Bulk pack of 6. List $75.00 . . . Our Price $69.95 Abrasive impregnated rubber bar cleans
#85265 Rusty Rail Track Painter 1906 and 1940, these heavy duty wooden cars carried
model railroad track for better electrical
#85266 Weathered Tie Track Painter ore throughout the upper Midwest and Northeast. Finished models shown. Painting, decaling and
conductivity. Also removes rust and tarnish
Bulk pack of 12. List $75.00 . . . Our Price $69.95 assembly required. Couplers sold separately.
on all metals and de-glosses plastic gently.
2” x 3” x 3/4”. 240 grit.
See our website for more great freight car kits from Tichy, Kadee® #80437 Bright Bar $8.95
and Funaro & Camerlengo, plus laser-cut cab kits and more! 3 or more $7.35 each

30 DAY MONEY BACK GUARANTEE • ORDER ONLINE www.micromark.com • 113

 HOW TO PLACE AN ORDER…
By Internet: Go to www.micromark.com ORDER FORM Mail to: 340 Snyder Ave., Berkeley Heights, NJ 07922-1538
ORDER TOLL-FREE: 1-800-225-1066 • Web: www.micromark.com
and use our website ordering system.
Be sure to include the code numbers printed SEE BACK COVER FOR THE
on the back cover of this catalog. FOLLOWING INFORMATION: PROMO CODE CUSTOMER
By Phone: Call 1-800-225-1066 toll-free from
the USA and Canada (from other areas, please ORDERED BY / BILL TO: Shipments to the states below
call 1-908-464-2984). For fastest service, please require applicable State and Local
fill out your order form for reference before NAME Sales Tax. If you live in any of
calling. Our EXPANDED Call Center hours are these states, please add State
Monday, Tuesday and Wednesday 9 am to ADDRESS and Local Sales Tax to your order.
8 pm, Thursday 9 am to 6 pm, Friday 9 am to If you have questions, please call
5 pm, and Saturday 10 am to 5 pm Eastern CITY STATE ZIP 1-800-225-1066 and we can help
Time. At other times, your order will be taken
by automated answering equipment.
you calculate the exact amount
Please note: This number is for straight-forward
COUNTRY required to place your order.
orders only. If you have questions, or need advice AK HI ME NY UT
or specifications, call Customer Service or our SHIP TO: (Provide delivery address suitable for both USPS and other carriers if different than ORDERED BY / BILL TO)
AR IA MI OH VA
Tech Department; see contact information below.
NAME AZ IL MN OK VT
By Fax: 24 hours a day at 1-908-665-9383. CA IN NC PA WA
Credit card and purchase orders (for approved
accounts) only. Be sure to include the code ADDRESS CO KS ND RI WI
numbers from the back cover of this catalog. CT KY NE SC WV
By Mail: Fill out the order form at right. Order CITY STATE ZIP DC LA NJ SD WY
by item number, price and a short description FL MA NM TN
of item. For certain heavy items (indicated in COUNTRY GA MD NV TX
catalog by __), add additional freight charges.
CUT OUT AND MAIL THE ENTIRE PAGE TO:
Micro-Mark, 340 Snyder Avenue, DAYTIME PHONE: ( ) (In case we have a question about your order).
Berkeley Heights, NJ 07922-1538
EMAIL ADDRESS:
SHIPPING
We ship by USPS or other carriers (at our
option), so be sure to give a complete address PAYMENT METHOD:
Enclosed is my check or money order payable to Micro-Mark.
deliverable by all carriers. Most orders are CARD #
VISA
AMEX
MASTERCARD
DISCOVER EXP. DATE SECURITY CODE
shipped complete within 2 business days;
however, if we must ship a partial order due to
an out-of-stock situation, merchandise will not
be charged to your credit card until shipment is Cardholder’s Signature
made. Certain heavy items (indicated in catalog
by __) have a freight surcharge in addition to
the regular shipping and handling charges ITEM # DESCRIPTION QTY PRICE EACH TOTAL MERCH. ADD’L FREIGHT
shown. All Freight and Shipping & Handling
charges are non-refundable. Hazardous
materials may be shipped by ground to the
48 contiguous (lower) United States ONLY.
Expedited Shipping options are available
with our Quick Ship service. Place your order
by phone or website between 9 am and
12 noon ET, Monday through Friday. For an
additional fee, we’ll ship your order the same
day by overnight or 2-day express. This service
is available on credit card orders only to U.S.
addresses.
PAYMENT
Pay by personal check (U.S. bank only) or
money order in U.S. funds, or charge to VISA,
MASTERCARD, AMEX, DISCOVER or PAYPAL.
Include your credit card number, expiration
date, security code and signature. Orders
paid by personal check will be held for BE SURE TO INCLUDE SHIPPING & HANDLING CHARGES
A. Merchandise Total
check clearance. Merchandise 48 Contiguous Hawaii, Alaska, U.S. B. Shipping & Handling (based on line A )
WE COLLECT SALES TAX. SEE THE Total United States Territories & Possessions
YELLOW BOX AT THE UPPER RIGHT AND $0.01 to $19.95. . . . . . $8.95 . . . . . . . . . . . $14.95 C. Additional Freight Total
ADD APPROPRIATE SALES TAX FOR YOUR STATE. $19.96 to $40.00. . . . . . $9.95 . . . . . . . . . . . $18.95 D. SUBTOTAL ( lines A + B + C )
$40.01 to $59.90 . . . . $10.95 . . . . . . . . . . . $21.95
Open Account: Available to businesses, $59.91 to $100.00 . . . . $13.95 . . . . . . . . . . . $27.95 Your State and Local Sales Tax (% of line D)
government agencies, schools, etc. Please $100.01 to $200.00 . . . . $16.95 . . . . . . . . . . . $32.95
furnish 3 credit references with your initial Purchase a Gift Certificate
$200.01 to $350.00 . . . . $23.95 . . . . . . . . . . . $41.95
order. Minimum retail order: $100.00; $350.01 to $450.00 . . . . $28.95 . . . . . . . . . . . $45.95 TOTAL AMOUNT DUE
payment terms: Net 30 days. $450.01 to $550.00 . . . . $34.95 . . . . . . . . . . . $49.95
E-Gift Certificates are available… $550.01 to $650.00 . . . . $39.95 . . . . . . . . . . . $55.95 Continue your order on a plain sheet of paper if you run out of room in the form.
see our website or call for details. $650.01 or more . . . . . . . $45.95 . . . . . . . . . . . $64.95
Other areas: Call 908-464-6764 or fax 908-665-9383 OUR NO-RISK GUARANTEE
IF YOU HAVE QUESTIONS You must be completely satisfied with every item purchased from Micro-Mark.
About an Order: Contact us by email at MODEL KIT RETURN POLICY If for any reason an item does not live up to your expectations, return it in original
[email protected] or call Model kits are returnable only if the contents are in an undisturbed, condition within 30 days for an immediate refund or credit.
Customer Service: 1-888-263-7076, like new condition. The return of a kit will not be accepted if:
9 am to 5 pm Eastern Time, weekdays. 1. Parts have been removed from sprues or wood sheets. Prices in this catalog are valid April 1, 2022, through June 10, 2022 © 2022 Micro-Mark®
Need Technical Information about a Product: 2. Construction has been started. All items subject to availability. We reserve the right to correct typographic errors. Prices subject to change
Email [email protected] 3. Bags of component parts have been opened. without notice. Products may vary from photos. Micro-Mark®, Micro-MakeTM, MicroLux® and Switch Tender®are
or call our Product Service Department: 4. Box and/or contents have been damaged. registered trademarks.
1-908-464-1094, 1pm to 5 pm Eastern Time, 5. Kit is returned in packaging other than manufacturer’s
weekdays. original packaging. Some items might be subject to California Prop 65. See our website for details.

114 • ORDER TOLL FREE 1-800-225-1066 • 30 DAY MONEY BACK GUARANTEE • OUTSIDE USA CALL 1-908-464-2984
 MICRO-MAKETM POWER TOOLS NEW ITEMS
3D Printers, CNC Machines, Laser Cutters…Micro-Mark Has it All! And, All 3D Printers Ship FREE! See our website for details.

#90048 Creality CR-30 3DPrintMill 3D Printer

Ingenious, infinite and incredible…the 3DPrintMill is the
ultimate revolutionary 3D printer! Equipped with the rolling
conveyor belt, the 3DPrintMill enables you to print “infinitely” #90046 Creality Ender-3 V2 3D Printer Kit #90315 Creality CR-6 SE 3D Printer Kit #90202 Creality Ender-7 3D Printer Kit
on the Z-axis for large prints or production lines producing Requiring some assembly, this entry level 3D printer kit For the most part, accurate 3D printing is the result of a Another breakthrough in printing speed, The Creality Ender
smaller parts, making it a desktop mini-factory. Additional features classic design with an integrated all-metal body leveled bed. That’s usually a challenging goal because most 7 features high-speed printing and invigorating power up
features include Dual-gear Metal Extruder capable of 200 that allows you to see the inner workings of a 3D printer. 3D printers will present nozzle clogging, poor adhesion, to 250 mm/s. Enjoy instant high-speed printing while
hours of continuous printing, Stable Core-XY Structure for Ender-3 includes a 32-bit silent motherboard for a quieter and generally unleveled-related issues that compromise maintaining the same molding precision quality. Other
producing superior quality precision 3D prints, Exclusive 3D printing experience. Compatible with all 1.75 mm PLA the quality of prints. The Creality CR-6 SE offers precisely features include smooth discharge and stable feeding, path
3DPrintMill Slicer, and more. Super Buy $1099.00 filaments. Super Buy $299.95 the opposite. Featuring an innovative, true Leveling-Free optimization, higher precision linear rail, robust motor for
Technology, this is a 3D printer that lets you always rely on high-speed operation, metal unibody design, dual motors
highly accurate results. Never have your creativity and running in parallel for faster speed and higher precision,
productivity affected by nozzle-related replacement issues and extruder cooling fan for high-speed cooling.
again! List $499.99 Super Buy $449.95 List $999.95 Super Buy $799.95

#89607 FlashForge Creator Pro II 3D Printer #90465 FlashForge Adventurer 4 3D Printer

This popular desktop 3D printer is built with a sturdy, sub- Features include auto-leveling platform with an aluminum
stantially stable metal frame and an enclosed chamber to base; magnetic, removable build platform – pick up printed
help protect and insulate 3D prints. The Creator Pro II features objects within 5 seconds; quick release nozzle with ultra-
an optimized build printing platform, dual extruder with fast heat up; compatible with PLA, PETG, ABS, PC, PLA-CF, #90126 MakerBot Replicator+ 3D Printer #90117 Palette 3 Pro by Mosaic
two spools, 8.9” x 5.8” x 5.9” build volume and 100~500 PETG-CF; compatible with FlashForge 0.3 mm, 0.4 mm, and The MakerBot Replicator+ is engineered and tested for With a simple plug-and-play setup, Palette 3 enables your
micron layer resolution. Works with ABS, PLA and other 0.6 mm nozzles; fully enclosed printing chamber and HEPA reliable, faster printing. Replicator+ prints high-quality printer to print multiple colors in one print, combine flex-
standard filaments. What’s in the box: FlashForge Creator 13H air filter system; manage a series of Adventurer 4 concept models faster, easier, and with a bigger build ible and rigid materials together, and achieve high-quality
Pro II, 2 spool holders, 2 filament guide tubes, 2 spare blue 3D Printers remotely for ultra-efficiency and high output; volume. Combined with powerful workflow tools, the complex prints with soluble supports. Communicate your
platform stickers, dual extruder, filament, 16GB SD card Auto Filament Loading System suspends printing if filament MakerBot Replicator+ streamlines desktop 3D printing for ideas and bring your prints to life with Palette 3’s 8 color
with ReplicatorG and FlashPrint software, sample test files, breaks or runs out, then resumes printing after filament is professionals and educators. To ensure unparalleled per- printing capabilities. Unlock multi-material printing by
cables, tool kit and user’s manual. Super Buy $999.00 detected and loaded. $799.95 formance, the Replicator+ features sturdier construction, combining flexible and rigid materials. Experience Palette’s
25% bigger build volume, better print adhesion, and more. 3rd generation splice core for fast and reliable splicing.
The Smart Extruder+ and all ease-of-use features from the Automated filament management allows you to run your
previous model come standard. Super Buy $1999.00 longer prints without interruption. Super Buy $799.99

#89606 FlashForge Adventurer 3 3D Printer

The first of the company’s Adventurer series, the ultra-quiet
Adventurer 3 is a great choice for family, school, workshop
#89590 Anycubic Wash & Cure Machine and 3D printing beginners. Its user-friendly interface design #89569 Shark SD100 Master Set by Next Wave CNC #89295 Shark HD510 by Next Wave CNC
Powerful built-in 365nm and 405nm UV light set with and powerful functionality make 3D printing easy. Features This small-format model packs the same punch as larger New and extraordinary, the Shark HD510 is the must-have
360° rotating turntable bathes 3D prints in UV light to like a pre-leveled build plate and automatic filament loading units, making it a great value. Create 3D carvings and tool for any shop, from home workspace to production floor.
completely cure prints. For added safety, the UV light system, which suspends printing when filament is broken machined parts in a variety of media, including wood, soft The HD510 comes standard with everything you need to
shuts off immediately if the top cover has been removed. or has run out, lets you spend more time creating and less metals, plastics and more. Simply design your piece in quickly get it set up and running: The latest version of Vectric
Includes a sealed container and lid to store the washing time fussing with equipment. Specifications: Extruder VCarve Desktop (included) or other design software, then, VCarve Desktop design software, a color pendant controller,
liquid for re-use. List $219.00 Our Price $189.95 Number: 1; Extruder Diameter: 0.4 mm; Max Set Temp. of using the proprietary Ready2Control software (also included), 2 hold down clamps, carbide V-bit, and Next Wave Automa-
Extruder: 240˚C; Max Set Temp. of Platform: 100˚C; Print load and run your design. Our exclusive Master Set includes tion’s exclusive, patented Virtual Zero Unlimited software.
See micromark.com for more Speed: 10-100 mm/s; Filament: PLA / ABS; Print Volume: a most-popular 6-piece CNC bit set and Bosch PR20EVS Colt Made in the USA and backed with a full one-year warranty,
3D Printers and Accessories! 150*150*150 mm; Layer Resolution: 0.1-0.4 mm; Print
Resolution: ±0.2 mm. Super Buy $449.95
Palm Router.
List $1649.95 Super Buy $1599.99*
plus lifetime technical support.
Super Buy $3999.99*

See our website for video *Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance. ORDER ONLINE www.micromark.com • 115
 SAVE 10%!
when you sign up for Micro-Mark text messages 340 Snyder Avenue, Berkeley Heights, NJ 07922
PRSRT STD
U.S. POSTAGE
PAID
MICRO-MARK
Text MICROMARK to 35256 and
get your exclusive coupon code NOW!
By signing up via text, you agree to receive recurring automated promotional and personalized
marketing text messages (e.g. cart reminders) from Micro-Mark at the cell number used when signing
up. Consent is not a condition of any purchase. Reply HELP for help and STOP to cancel. Message
frequency varies. Message and data rates may apply. View Terms at http://attn.tv/micromark/terms.html
and Privacy at https://attnl.tv/legal/p/ufa
AND DON’T FORGET! Sign up for our Email Newsletter to receive
exclusive money-saving offers and new product announcements.
Visit our website often to see hundreds of products you won’t find
anywhere else…www.micromark.com

PROMO CODE CUSTOMER

Curious About Laser Cutting and Engraving? Micro-Mark Has the Answers!
Micro-Mark has been bringing you the best solutions in laser cutting and engraving for years, and that commitment continues with these exceptional new machines from xTool.
Through our own rigorous testing and trials of the wide array of machines available on the market, we have found the Makeblock line of xTool products to be among the best in
terms of quality, versatility, ease-of-use, and affordability. Get in on one of the hottest maker movements today with Micro-Mark and xTool! See full features and specifications at micromark.com

Unbox Your Imagination with the xTool D1! xTool M1…The World’s First Desktop Hybrid Laser Cutter / Blade Cutting Machine
The xTool D1 smashes the boundaries of typical laser cutters and With both laser and blade heads, the M1 integrates blade cutting, laser cutting, and engraving into one powerful
engravers by literally thinking outside the box. The open frame design machine, allowing you to do more with a wider variety of materials. Light in weight at only 21 lbs. and compact
of the xTool D1 allows you to cut and engrave large, tall, irregularly with a footprint of only 21.9” wide x 17.5” deep x 9.05” high, the M1 fits nearly anywhere and still provides a
shaped, and 3 dimensional pieces that would never fit inside other working space of 15.15” x 11.81”…comparable to other laser cutters which take up far more space. Normally, a
machines. From plaques to skateboards to the hood of a car and laser cutter can perform very well on many materials such as wood, metal and glass. However, for some soft
more, the only limit of the xTool D1 is your imagination! materials such as vinyl, which can be used for DIY T-shirts, sign making, logos and more, a blade cutter is preferable
INCLUDES ROTARY ATTACHMENT for engraving cylindrical objects. to avoid the burnt edge, discoloration and toxic fumes generated by laser cutting. Luckily, the M1 has both!
#90446 Makeblock xTool D1 Laser Cutter/Engraver with Rotary #90505 Makeblock XTool M1 Desktop Hybrid Laser/Blade Cutting Machine. List $1499.95 Super Buy $1099.95
Attachment $799.95 See full features and specifications at micromark.com See full features and specifications at micromark.com

Specially Designed for Creation and Education,

Laserbox Re-imagines and Redefines Desktop Laser Operating Performance
Includes Rotary Attachment for Nearly Unlimited Creative Versatility and Smart Air Purifier for In-home Operation
Makeblock xTool Laserbox Desktop 40 watt Laser Cutter is one of the best and most user-friendly all-in-one machines
on the market today. With everything you need included, you can basically unbox the components and get to work.
Laserbox features include: Expanded creative possibilities Laserbox now supports engraving on both flat and cylindrical surfaces
with included rotary attachment. 40W CO2 laser engraver/cutter for various materials You can enjoy laser cutting or engraving on paper,
wood, acrylic, cloth, leather, rubber, cork, plastic glass, and over 100+ more materials with a maximum cutting thickness of 15 mm.
Work both online & offline You can choose to connect Laserbox and software via Wi-Fi/USB/Ethernet, or use Laserbox Pro
alone without a computer allowing you to create anytime and anywhere! Cut and Engrave by drawings
You can directly draw on the material, place drawings beside the material, or customize official
designs for quick cutting and engraving. No computer required, only your imagination.
Laserbox includes: Test Materials Enjoy testing 3 mm basswood material precut and ready-to-go.
Rotary Attachment With the included rotary attachment, you can begin etching, engraving, and laser
cutting cylindrical items like tumblers easily and quickly. All-in-one stable software for Windows and
MacOS You can draw right within the software with integrated design tool, or import DXF, TIF, SVG
and 10+ design files from CAD, Inkscape, illustrator, etc. Make any design possible. Built-in 5MP camera
for accurate cutting/engraving You can preview the 500*300 mm working area in real time and adjust the
position of your design properly on the material. Live camera preview. Quad protections for a safe and secure
environment for you and your kids Laserbox Pro complies with CE, FDA and 9 international safety certifications,
sends 8 early warning alarms, and uses a fireproof cover. Warranty Includes 12 Month Manufacturer Warranty.
Eco-friendly ventilation design with Smart Air Purifier* You can choose to use the air purifier to clean the generated
dust/vapors and protect yourself from toxic fumes, which also contributes to environmental protection. Green and sustainable.
*NOTE: it still requires an outside ventilation source such as a window or vent. See our website for additional information on the Smart Air Purifier.
Work area dimensions: Work table area 19.69'' x 11.81'' max. Workpiece height (with honeycomb tray) 0.87'' max. Workpiece height (without honeycomb tray) 3.54''.
Work table surface black (special surface finishing technique helps reduce burn marks or discoloration).
#90158 Makeblock xTool Laserbox Desktop 40W Laser Cutter with Rotary and Smart Smoke Purifier $4699.00** See our website for additional information.
**Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance.