RIG 350 HP IOS – SPE SPECIFICATION

Update: February, 2022

1. General Details
No Description Specification
1 Name of Drill Unit (Rig) Rig IOS-SPE #02
2 Rig Type Truck Mounted Rig
3 Rig Capacity 350 HP
4 Manufacturer Service King
5 Year of Manufacture 2008
6 SKPI/PLO MIGAS : 212/56-331/PLO/DMT/2018
EBTKE : 05.STF/30/SKPI/DEP/2021
7 Place of Manufacture the Midwestern United States (USA)
8 Drawwork 350 HP Self-Propelled Double Drums complete with Hydraulic
Cylinder type for make up and break out Tong, C/W Torque
gauge, Chrono-O-Matic, Hydro-O-Matic Brake, Friction Disk
system for secondary brake and six bolt clamp type dead line
anchor.
9 Rig Availability Ready and available in Siak, Riau Indonesia

2. RIG and Supporting Specification

HOISTING SYSTEM  
1 Rig and Mast - Service King USA 1 Unit
- Mobile Rig, truck mounted.
- Mast clear height 97 feet
- Hook Load Capacity 6 lines 225,000 Lbs
- Racking capacity 7000-ft 2-7/8-in doubles
- Completed with Anti Fall and Climbing Devices, retracted type, match to mast height.
2 Drawwork - Service King USA 1 Set
- Input HP Rating 350HP
- Double drum w/ drilling line & sandline drum
- Completed w/ Auxiliary Brake (Friction Disk Brake)
- Sandline 1,800-m, 9/16” size c/w sure way sand line guide.
3 Swabbing tool and lubricator completed with swivel, pack off & on-off tools, consists of. 1 Set
- various connection union.
- Hydraulic hand pump.
- Type H oil saver c/w rubber.
- Tubular jar + sinker bar.
- Swivel ROPE Socket.

Page 1 of 6
 - Mandrel cup rubber.
4 Crown Block Saver with Crown-o-Matic 1 set
5 Crown Block. Hook load capacity 180,000-lbs 1 set
6 IDECO Travelling Block with Hook, load capacity 200,000-lbs 1 set
7 BVM Link for tubing elevator, 1-3/4” X 72" size, Load capacity with 110 Ton (242,550 lbs) 1 set
8 Link for sucker rod elevator 1 set
9 BVM - Elevator  
  - Single elevator for 2-3/8” tubing EUE 2 ea
  - Single elevator for 2-7/8” tubing EUE 2 ea
  - Single elevator for 2-7/8” Drill pipe 2 ea
  - Single elevator for 3-1/2” tubing EUE 2 ea
  - Single elevator 4-1/2” Blank pipe 1 ea
  - Sucker Rod Elevator for 7/8” sucker rod 2 ea
  - Sucker Rod Elevator for 3/4” sucker rod 2 ea
  - Single elevator for 5-1/2” casing c/w 5-1/2” safety clamp (for RIH ESP shroud) 1 ea
10 Air Hoist 1 ea
11 CAVIN - Spider Slip  
  - Dies for 2-3/8” 2 set
  - Dies for 2-7/8” 2 Set
  - Dies for 3-1/2” 2 Set
12 DP slip  
  - Dies for 2-7/8”, 3-1/2" 2 Set
12 Wagner USA - Weight Indicator 1 set
13 Deck floor complete or working platform 1 set
14 V-door 1 set
15 Cat Walk 1 set
16 Pipe Rack 1 set
17 Hydraulic pump for rig 2 set

POWER & ELECTRICAL SYSTEM  

1 Generator Set 2 Unit
CAT 3406 Generator with diesel engine, Rating @ 250 - 350 KVA at 50 or 60 Hz, complete with, All of
- Cooling system electrical
- Air cleaner equipment
- Safety Equipment: safety shutdown switch, Hydraulic Mechanism, Flame arrester muffler, Dynamo explosion
stater 24 Volt – Must be rated to power all Rig and third-party electrical equipment at 90% max. proof and
rating. refer to IADC
- Completed with maintenance record regulation
2 Philip - Rig Lighting 12 EA
- Explosion Proof Lights standing lamp
- Appropriate to night safety operation min 1500
- Mast light complete Watt

CIRCULATING SYSTEM  
1 Mud Pump - Work Force and National 1 Set
400 Hp Triplex pump
- Able to give pump pressure up to 3000-psi
Page 2 of 6
 - Able to give pump rate 6-bpm up to 8-bpm- Completed w/ calibrated heavy duty pressure gauge-
Completed w/ certified safety relieve valve
- completed with shear pin - Completed w/ centrifugal feeder pump
- 1 pump able to give 0.5-bpm rate
- Completed with spart part liner, piston and rubber size 4”, 4-1/2”, 5”.
- Completed with connection to 4” line WECO for COMPANY’s cementing unit
2 Salt Water Tank 2 units
- Tank capacity 200-bbls
- Complete with agitator
- Able to set-up tank in parallel position
3 DOC Tank 1 unit
-  Tank capacity 200-bbls
- Completed with screen
4 Influx Tank 1 unit
- Tank capacity 150-bbls
5 Trip Tank 1 unit
- Tank capacity max 20-bbls
- Volume channel indicator: 0.5-bbls per inch
6 Hopper 1 set
- Complete with electrical centrifugal pump
- Connected to SW tank
7 Pump Flow Line
- 2” chicksan w/ min rating 5000-psi 1 set
- 3” flexible hose w/ min rating 5000-psi length 30 – 40 FT each 1 set
- 3" flow line 1 load
- Rating 5000 psi
- Length: min. 155-ft from the well
- Connection: thread or quick coupling
- Complete with cross-over 2-7/8” x 2” LP
8 3" Stand Pipe, rating 5000-psi 1 ea
9 Kelly Hose, rating 5000-psi 1 ea

BLOW OUT PREVENTER SYSTEM  

1 BOP completed with valid certificated  
Hydril, 7-1/16” x 3000-psi Annular completed with rubber element and ring gasket. 1 set
Shaffer, 7-1/16” x 3000-psi Double Ram (Pipe & Blind) 1 Set each
Completed with:
- 3-1/2” single pipe ram block
- 2-7/8” single pipe ram block
- 2-3/8” single pipe ram block
- Provide spare rubber element each size and ring gasket
2 Koomey Type 80 – Accumulator 1 set
suitable for BOP Stack
- Capacity of reservoir tank: 380-Gals
- Accumulator Bottles: 8-ea (10-gals/bottle)
- Rating 3,000-psi
- Master Control Set: 4-Stations
- Driven charge pumps: Electric driven pumps and air operated pumps
- Length of control hose: min 150-ft
- Control line suitcases completed with armor.
- Alarm System
Page 3 of 6
 - Emergency Air Compressor for air supply to pneumatic pump accumulator
3 Inside BOP 1 ea
- Tested & Certificate for up to 5000-psi
- Complete w/ 2-7/8” EUE, 2-3/8” EUE connection
4 Safety valve 2 ea
- Tested & Certificate for up to 5000-psi
- Complete w/ 2-7/8” EUE, 2-3/8” EUE, 2-7/8” IF, 3-1/2” IF connection
5 FMC - Class III Manifold 1 set
- At least three ways of fluid
- Working pressure 5000-psi
- Min. 5 gate valve + 1 adjustable choke
6 Poor Boy Separator / Mud Gas Separator  
7 Flaring 1 set
- Flare Line and stack system
- Length: min. 155-ft from the well
- Connection: Flanged-end or welded
8 Sucker Rod BOP completed with hook sucker rod (SR), shackle, element packing spare   1 ea
9  Casing Flange Adaptor C/w Stud bolt
& nut 
- Adaptor 7-1/16” 2000 psi x 7-1/16” 3000 psi 1
- Adaptor 7-1/16” 3000psi x 7-1/16” 5000 psi 1

DRILLING & ROTATING EQUIPMENT  

1 LOGAN - Power Swivel & CAT Engine Power Pack Unit 1 unit
- Static load rating 120 Ton
- Right & Left torque limit (min. 8100 lbs.ft)
- Has connection to various size of tubing, DP, and DC
- Completed with maintenance record
2 King Swivel 1 unit
- Static load rating 120 Ton
- Standard stem connection 3-1/2 IF
3 BHA (Class: New or premium c/w thread protector) inspected and
certificated

- 4-3/4" Drill Collar completed with safety clamp 10 ea

- 3.5" Drill pipe 9.5 PPF 150 jts
- Premium class grade G completed with drift
- All of drill collar completed w/ handling equipment (DC elevator, lifting sub, safety chain, clam, and
pipe wiper)
Drilling Sub
- Provide complete drilling sub and crossover to run all of string for DC and DP.
4 Lower Kelly cock 1 ea
5 Casing Scrapper  
- 5-1/2” casing scrapper
- 7” casing scrapper 1 ea
6 Maverick - Power Tong 2 set
- Able to connect & disconnect string 5 sets
- Completed w/ calibrated torque gauge 5 sets
- Dies for Tubing 2-3/8”
- Dies for Tubing 2-7/8”
- Dies for Tubing 3-1/2”

Page 4 of 6
 - Dies for DP 2-7/8”
7 Westco - SR Power Tong 1 set
- Able to connect & disconnect string
- Completed w/ calibrated torque gauge
8 BVM - Manual DP tong completed with torque meter 1set
9 Kunci tong (Kunci buaya) dari 2-7/8” s/d 5-1/2 completed with torque meter and spare 1 set

FISHING TOOL  
1 Over shoot  
- Over shoot for 2-7/8” tubing 1 set
Set of basket grapple for fishing 2-7/8” body, upset pin, and box
- Over shoot for 2-3/8” tubing 1 set
Set of basket grapple for fishing 2-3/8” body, upset pin, and box
- Over shoot for 3-1/2“tubing 1 set
Set of basket Grapple for fishing 3” body, upset pin, and box
2 Junk Basket for casing 5-1/2”  
3 Junk Basket minimum 4-3/4“ for casing 7” 2 ea
4 Impression Block  
- impression block for 5-1/2” casing
- impression block for 7” casing
5 5-1/2”, 7” Magnet able to connect to string and sand line 1 ea

SAFETY EQUIPMENT  
1 Engine Safety Device  1 set
- All of engines must have overspeed shutdown devices, spark arrest mufflers
2 APAR
- 150-lbs dry powder fire extinguisher 1 ea
- 10-lbs dry powder fire extinguisher 12 ea
3 Eye Wash 5 set
4 Gas Detector, Provided last calibration 1 set
5 Warning Sign, as required 1 load
6 Escape lines, DBI SALA – Slow Speed type 1 set
7 LEWIS - Climbing belt (body harness) 2 set
8 LEWIS - Lightning Arrester Complete with megger test equipment 1 set
9 Windsock 2 ea
10 First Aid Kit (P3K) 4 load
11 Personnel gas badge, Provide for minimum quantity of crew onsite 1 set
12 High Impact Glove for rig personnel  1 load
13 SCBA 2 set
14 ELSA 4 set

SUPPORTING EQUIPMENT  
1 Well Site Portacamp 1 set
- 2 beds complete for Coyman & Engineer
- Completed w/ Air Conditioner in each room
- Completed w/ water dispenser
- Completed w/ toilet
Page 5 of 6
2 Rig Supt Office Portacamp 1 set
- 1 bed complete for Rig Supt
- Completed w/ Air Conditioner in each room
- Completed w/ water dispenser
- Completed w/ toilet
3 Crew Portacamp for accommodation during on duty 1 set (depend
- full set portacamp for on duty personnel on total crew
- Completed w/ Air Conditioner in each room onsite)
- Completed w/ water dispenser
- Completed w/ toilet
4 Muster point crew and security post 1 set
5 Fuel tank 1 unit
- Complete w/ fuel transfer pump and metering
- Capacity 10,000-ltr
6 Warehouse 1 unit
7 Tool Box 2 set
8 Welding machine 1 Set
9 BPV setting tool completed with lubricator 1 set
10 WC portable 1 unit
11 Barton chart recorder rating 5,000-psi completed with Barton paper and scale in minute (not day)  1 set
12 Digital pressure gauge, rating 5,000psi 1 set
13 Mud balance 1 set
14 Turbidity Meter 1 set
15 Salinity Meter 1 set
16 Mars Funnel 1 set
17 PH Meter / lakmus paper 1 set
18 Tubing Stripper 2-7/8”, 3-1/2” completed with rubber 1 set
19 Radio communication  
- HT gas proof 4 unit
- Radio Base 1 unit
20 Bug blower water resistant 1 set
21 Derrick Tape scale FT (not meter) include back up 1 ea

Page 6 of 6