General Purpose High Voltage Supply

0 to + or - 1,000 through 0 to + or - 33,000 VDC @ 10 Watts

4000 Series

The 4000 Series is a line of fully adjustable protection, arc protection, and reverse polarity
DC to DC converters providing an economical protection are standard as well as remote on/
source of high voltage that is ideal for CRT’s, off and a 0 to 10 volt output voltage monitor.
lasers, Q switches, PMT’s, detectors, electron The 4000 Series has a built-in 10V precision
and ion guns, capacitor charging, test reference output available. These units also
equipment, and many other applications. feature excellent EMI/RFI shielding. Two #6-
These units feature remote voltage 32 studs mount the supply in a three inch
programming, resistance programming, or mounting pattern. Call, e-mail or fax your
manual adjustability via an externally requirements for immediate attention.
accessible potentiometer. Short circuit
FEATURES
0 to 100% Adjustability OUTPUT OUTPUT *1 RIPPLE INPUT CURRENT
Voltage Programmable: MODEL VOLTAGE CURRENT P-P NO LOAD FULL LOAD
high impedance input,>100K ohm
4010 0 to 1,000 10 mA .1% <100 mA <1.0 A
Voltage Monitor *2
Remote On/Off Control 4020 0 to 2,000 5 mA .1% <100 mA <1.0 A
EMI/RFI Shielding
Short Circuit Protection 4030 0 to 3,000 3.3 mA .2% <130 mA <1.0 A
Reverse Polarity Protection 4050 0 to 5,000 2 mA .1% <150 mA <1.0 A
Arc Protection
4070 0 to 7,000 1.4 mA .1% <160 mA <1.0 A
APPLICATIONS
Cathode Ray Tubes 4100 0 to 10,000 1 mA .1% <175 mA <1.0 A
Lasers and Q Switches
4120 0 to 12,000 .8 mA .1% <190 mA <1.0 A
Capacitor Charging
Test Instrumentation 4150 0 to 15,000 .67 mA .1% <190 mA <1.0 A
Electrostatic Field Generators
4200 0 to 20,000 .5 mA .2% <230 mA <1.0 A
Electrophoresis
2
4300* 0 to 30,000 .33 mA .4% <270 mA <1.0 A
OPTIONS
Negative Output Voltage, 4330* 2
0 to 33,000 .30mA .2% <400 mA <1.0 A
put “N” after model(Forexample:4300N)
RoHS(- ‘R’ suffix denotes the product is designed to meet RoHS
requirements i.e 4010R)
Epoxy: A. Low Outgassing (NASA approved per ASTM E-595-93) *Note: 1. At Maximum Rated Output Voltage.
B. UL 94 V0 flammability rating 2. No Voltage Monitor
Output Connector (AMP#861753-1): Available for models 4010 thru 4150

PHYSICAL CHARACTERISTICS
MODELS 4010 thru 4200 • SIZE: 4.1 (104) x 3.1 (78.7) x 1.4 (35.56)
MODELS 4300 thru 4330 • SIZE: 4.1 (104) x 3.6 (91.4) x 1.4 (35.56) Programming Voltage vs Output Voltage
WEIGHT: 1.5 Pound (.675 kg.) Approx.
CASE MATERIAL: Black Anodized Aluminum
INPUT CONNECTOR: Molex Header 09-75-2074 100
MATING CONNECTOR: Molex Crimp Terminal Housing 09-50-3071 (Supplied)
MOLEX Crimp Terminals: 08-50-0106 (supplied) 80
Output Voltage

MODELS 4010 thru 4200 • HV LEAD: 30KV 22 AWG

0 to 100%

MODELS 4300 thru 4330 • HV LEAD: 40KV 20 AWG 60

ELECTRICAL SPECIFICATIONS 40
INPUT VOLTAGE: +24 Volts (+20%- 5%)
OUTPUT VOLTAGE: See Table
20
OUTPUT CURRENT: See Table
ANALOG CONTROL: 0 to 10 Volts=0 to 100% Output
0
VOLTAGE MONITOR: 0 to 10 Volts=0 to 100% Output
ON/OFF CONTROL: On=0 Volts or N.C. 0 20 40 60 80 100
Off=5 Volts Programming Voltage
REFERENCE OUTPUT: 10 Volts (± 0.5%) 0 to 100%
OPERATING TEMP: -10° to +60° C

e-mail [email protected] Phone (209) 267-1630 Fax (209) 267-0282

Web site www.emcohighvoltage.com 70 Forest Products Road, Sutter Creek CA 95685

We reserve the right to make changes without notification

4705AD
 0 to + or - 1,000 through 0 to + or - 33,000 VDC @ 10 Watts
4000 Series

3.2(81.3) HIGH VOLTAGE

(INCLUDING HARDWARE)
OUTPUT LEAD

4010-4200 HV ADJUST WHITE SILICONE

24.00 (609.6) MIN LONG
PIN 1
1.40
(35.56)
0.84(21.3) 0.80(20.3)

0.33 (8.38)
0.53(13.5)
1.28 1.17
(32.5) (29.7)

1.55(39.2)

0.41(10.33)

3.00 4.10
(76.20) (104.14)
PROGRAMMING
PIN FUNCTION VOLTAGE: Apply 0-10V to pin 5 for 0-
100% output.
1 On-Off Control

Ground/Case
0.56 (14.29)
2 RESISTANCE: Connect potentiometer to pin 4
3 +24 Volt Input 1.55 (reference voltage), connect
(39.37) wiper arm to pin 5, and connect
4 10 Volt Reference Output 6-32/M3.5 potentiometer to ground.
3.1(78.7) MOUNTING STUD
5 Programming Voltage 2 PLACES

6 Internal Potentiometer
MANUAL: Connect pin 6 to pin 5, turn
7 Voltage Monitor front panel pot for voltage
adjust.
3.7(93.9) HIGH VOLTAGE
(INCLUDING HARDWARE) OUTPUT LEAD

HV ADJUST WHITE SILICONE

24.00 (609.6) MIN LONG
4300-4330 1.40
PIN 1

(35.56)
0.84(21.3) 0.80(20.3)

0.33 (8.38)
0.53(13.5)
1.78 1.17
(32.5) (29.7)

1.55(39.2)

0.41(10.33)

3.00 4.10
(76.20) (104.14)

0.56 (14.29)

1.80
(39.37) 6-32/M3.5
3.6(91.4) MOUNTING STUD
2 PLACES

e-mail [email protected] Phone (209) 267-1630 Fax (209) 267-0282

Web site www.emcohighvoltage.com 70 Forest Products Road, Sutter Creek CA 95685

We reserve the right to make changes without notification