Spin-field Generator

Everyone knows that elementary particles can

have the following properties : electric charge,
magnetic dipole moment, and the moment of
quantity of motion, i.e. spin, and these
properties are connected with each other. The
electric charge manifests as electric field in the
space surrounding this particle, the magnetic
moment manifests as magnetic field, and the
manifestation of spin can be seen as the
hypothetical ?spin-field?.
What is spin?
The spins of electrons and protons are
considered to be connected with their moments
of quantity of motion. But since this
conception contradicts the prohibition against
faster-than-light velocities, spin is therefore
considered to be just a quantum-mechanical
value. So, we know that there exists the
physical value called ?spin?. If in any
substance the spins of particles have a
preferable direction, then this is interpreted as
spin polarization of the substance. Every
substance creates a spin-field in the space
surrounding it when polarized by spins. (This
field is also called ?torsion field? or ?axion
field? in different works).
How is it possible to produce the spin-field
and how can it manifest? Since the spins of
elementary particles can be a source for the
spin-field, we can consider that a spin-field
can be produced as a result of spin
polarization, i.e. the selective orientation of
spins in space. The simplest way to achieve a
selective spin orientation is through the
mechanical rotation of objects. Thus, the spins
will be oriented along the axis of rotation.
Barnet applied this method in his experiments
when he observed the magnetization of a
ferrite rod as a result of the rod's rotation.
Since the spin is connected with the magnetic
moment, the spin-field produced as a result of
selective spin orientation manifested itself as
magnetization of a ferrite rod.
But the effective creation of a spin-field using
this method has several problems. Since the
orienting moment of gyroscopic forces is
proportional to the vector product of the
gyroscopic moment and the angular velocity
vector, then there is an absence of selective
(by sign) orientation effect on the spins of
particles oriented parallel to the rotation axis
by the gyroscopic forces. Secondly, the
magnetic fields produced as a result of spin
polarization will orient the particles of which
the rod is made (electrons and nucleii) not by
their gyroscopic moment, but by their
magnetic moment. The third problem is that
the spin-field will be produced in the same
space as the magnetic field, thus, it will
confound the analysis of the spin-field.
These problems can be solved in the case of
rotation of objects made of substances having
anisotropic properties (e.g. electromagnetic
properties.) The anisotropy should be directed
with some angle in respect to the rotation axis
(this angle should be greater than or equal to
the angle of the spins? precession in respect to
the axist of anisotropy). Thus :
At first, it is necessary to orient the particles
along (with respect to) the object's axis of
spatial anisotropy. And this axis of anisotropy
must be oriented with some angle with respect
to the axis of rotation of the object. As a result,
we can provide the necessary gyroscopic
moment that affects the spins of particles of
which the rotating substance is made (this
gyroscopic moment is proportional to the
vector product of the gyroscopic moment and
the angular velocity of the spin vector of the
rotating substance, i.e. it is proportional to the
sine of the angle between them, it has the
maximum value if the angle is equal to 90
degrees and the minimum value if the angle is
equal to zero, and it also increases with the
increase of the angular velocity of rotation).
Thus, we can increase the quantity of the
selectively oriented spins of this substance.
Secondly, it is necessary to use the anisotropy
of the properties of substance (space) whose
effect is greater than the substance's
electromagnetic polarization that originates
from it?s spin polarization due to the dipole
and quadrupole moments of this substance.
Thus, as a result of orientation of EM-
properties in some angle with respect to the
rotation axis, we can achieve a separation of
the spin-field and the magnetic field in space
due to the rotation of the vector of the EM-
polarization of the substance with respect to
the spin-polarization vector.
An increase of the effect of selective
orientation of gyroscopic forces, spin
polarization, and the strength of the spin-field,
can be achieved with an increase of excess of
gyroscopic forces over orienting effects of
other external and internal forces
(electromagnetic). The particles (electrons and
nucleii) are not in equal conditions in real
substances and they are always in the process
of thermal motion, therefor the optimal values
of the angular velocity, the anisotropy of
properties, and the angle between the axes of
rotation and anisotropy should depend on the
parameters of the material and on the nature of
physical construction of the device.
Nevertheless, the angle between the rotation
axis and the axis of anisotropy should be equal
or more than 30 degrees according to the
experimental data.
Due to external sources, it is possible to
achieve an anisotropy of substances in practice
, e.g. the external (electromagnetic) field that
does not slow down the rotation of the active
elements of the material employed. It is also
possible to use the inherent anisotropy of this
substance that is due to it?s crystal structure,
the concentration gradient, the deformation of
crystal structure, etc. and it is possible to use
both variants.
An example for implementing this method is
proposed below.
This is the diagram for the spin-field
generator.
The generator consists of a rotating hollow
cylinder made of ferrite-magnetic material
with the axis of rotation coinciding with the
cylinder?s main symmetry axis. Four (wedge-
like) permanent magnets are inserted into the
cylinder. The magnets are magnetized
perpendicularly to their own plane. The
cylinder can take the form of either a flat ring
or a tube. It is possible to cause the cylinder's
rotation (to create the motor) with different
methods, but it is necessary to take into
account that external EM-fields, and the
materials used in the motor can alter the
properties of the spin-field significantly.
One of the possible variants of implementation
of this method consists of :
1. - Ferrite ring 20x12x6 mm
2. - ferrite-barium magnets,
3. - the rotation axis.
The ring should rotate counterclockwise with a
velocity of several thousands revolutions per
minute. Magnets inserted into the cylinder
should create a magnetic field directed against
the direction of rotation. The elements of
attachement and cyliner-rotation (the engine)
should be made of non-magnetic materials.
The equipment should be placed at a distance
of ten cylinder radii in a direction
perpendicular to the cylinder axis in order to
prevent interference. The attachment and
equipment elements are not shown because
they don?t affect the radiation in the case of
the fulfillment of the above mentioned
requirements . Nevertheless, it is
recommended that the following materials be
used: silver, cadmium, aluminium, wood,
rubber glue.
The experiments with the active spin-field
generators revealed the following results :
The spin-field does not interact with the
crystal lattice of substances. Thus, it has strong
penetration ability (it propagates through both
ferroconcrete and lead). Isotropic substances
that could screen the spin-field were not found
in the experiments. Only zinc and steel can
produce a delay in the propagation, becoming
a source of a spin-field themselves. Basically,
the interaction of a spin-field and the transfer
of energy of spin-waves is observed in the case
of the resonance interaction with the spins of
electrons and nucleii of matter. Thus, the
effective control of the orientation of spins of
matter is possible, and this is a completely new
method for the control of its physical and
chemical properties. This theoretical
hypothesis was confirmed experimentally.
Interesting results were achieved when
producing effects in biological objects with the
spin-field radiation. Some parameters of this
radiation can provoke an increase of the ?grow
energy? of plants and an increase of animal?s
immune systems.
The spin-field cannot be detected by ordinary
detectors. In some cases (with the special
elucidation) the spin-field can be seen without
use of any instruments.
The spin-field produced by the generator
described above is concentrated in two
opposite beams propagating along the rotation
axis at a distance of tens of meters. These
beams can have four different attributes
depending on the mutual orientation of
magnetic induction vector and the direction of
motor rotation. The beam that propagates
along axis 3 in the diagram is the most
harmless for man. Nevertheless, it is unsafe to
be exposed to this beam for more than several
minutes. When the rotation is stopped, the
intensity of spin-field decreases to some
constant value that can be retained for several
weeks, i.e. the spin-field (and it?s influence)
can remain even when the generator is turned
off.