#1 Pipe Wrench

Wrench
As per its name, this spanner is used to fasten or dismantle pipes and their units. Its jaw is made of
forging tough steel. On its movable jaw flat threads are cut and on its fixed jaw, a plate is joined with
a groove In it.

A knurled round nut is fitted in this groove. On revolving this nut, the movable jaw increases or
reduces the size by moving up or down. A spring is fixed between the fixed and movable jaw, which
helps in the proper grip of the job. Pipe wrenches are made of 6”, 9”, and 18”.

#2 Chain Wrench
In order to fasten or dismantle pipes or round jobs of larger diameter, a chain wrench is used. When
the job is held in the wrench it is revolved. A plate having cuts in its mouth is fitted, which is joined
with a rivet. Chain drips the job very strongly.

#3 Socket Wrench

This type of wrench is available with 1/4″, 3/8″ (most common), 1/2″, and 1″ drives, you fit just the
right size socket you will need at the top of the drive. If an obstacle is found while turning the
handle, You can reverse the course just to give yourself room and then continue working.

#4 Torque Wrench
Torque Wrench
These types of wrenches are made to provide a certain amount of torque without overtaking or
tightening. There can be different types available (involving manual, digital, and other variations).

It is commonly used for automotive work for tightening wheel lug nuts. A torque wrench may be
used on bicycles, farming equipment, or any situation where tightening the nut or bolt to a particular
torque specification is usually determined by the manufacturer.

#5 Ratcheting Wrench

Ratcheting Wrench
The ratcheting wrench is similar to the combination wrench, the ratcheting wrench has at least one
end inside which is a ratcheting device.
This wrench permits you to turn the wrench to tighten or loosen without removing and readjusting
the position of the wrench handle hitting an obstacle after each turn. This makes it very easy to work
in tight areas.

Related: What are the different types of screws & their uses?

#6 Oil Filter Wrench

Oil Filter Wrench
The oil filter wrench is actually of four different styles, which is used primarily in the automotive
industry. The chain strap and metal strap style filters apply a loop to protect around the filter casing.

Finally, a socket-style filter wrench resembles a cup, which consists of chopped parts. These fit
under a filter cap and are used with a ratchet handle.

#7 Combination Wrench

Combin
ation Wrench
The combination wrench consists of one side being a closed-loop for hexagonal or square nuts,
while the other end is an open U-shape.

It is often used for hard nuts, the closed-end loosens the nut so that the open end is used to quickly
finish it. Like sockets, a combination wrench is commonly sold in a kind of wrench size.

#8 Adjustable Wrench
Adjustable Wrench
They have an open end with a spiral screw that is fixed and opens or closes the crescent as you
turn it. These are some of the most common wrenches available and the most widely used types.
This is also known as a crescent wrench.

For this purpose, it can perform the same basic function as a whole set of combinations or an open-
ended wrench, although it needs more area due to its thicker size.

#9 Impact Wrench

Impact Wrench
The air impact wrench uses an air compressor during the cordless impact wrench utilizes
a rechargeable battery. This is also known as an air wrench or air gun. It is used to resemble
a cordless drill in appearance.

This wrench uses high torque to remove stubborn nuts or bolts. They are a great option for handling
many nuts, although they are a poor choice for any job that requires accuracy.

#10 Crowfoot Wrench

Crowfoot Wrench
There is no handle for this open wrench. Rather, the single head is manufactured to attach to a
ratchet handle and socket extension, permitting it to fit in really tight positions.

When you do not first want to remove the surrounding parts, they do a lot of work to handle the bolts
located deep on the body of the machine.

Read Also: 23 Differe

Special Types of Wrenches

When you have heard that someone has mentioned these special wrenches, chances are you will
never own them. They are used for very specific functions or simply are not in common use outside
of certain industries. Which are described below.

#1 Pedal Wrench
Pedal Wrench
The pedal wrench consists of a round tip, usually with one or two U-shaped recesses. These types
of wrenches are used to repair the pedal. Therefore, it is most commonly used in bicycle repair
shops or for fairground rides like a pedal boat.

#2 Monkey Wrench

Monke
y Wrench
It is also like an adjustable spanner. Its bigger jaw is built with a handle itself. The other jaw is
movable on which threads are cut as in the pipe wrench. Its jaw is of plain surface like that of an
open-end spanner. These can be adjusted with a round nut. It is also used as a screw wrench.

#3 Pliers Wrench
Pliers Wrench
A plier wrench consists of flat-edged jaws at an angle and each is attached to a handle, which is
joined by a bolt. The names may not sound familiar, you may have used them at some moment in
your life.

A bolt slide between two or more positions of an opening on the upper jaw, providing the wrench to
be arranged to fit in different sizes of heads. The name evolves from the way this tool is gripped,
which is similar to a pair of pliers.

#4 Strap Wrench

Strap Wrench
Leather or canvas belt is provided which is rolled around the job and tightened with the buckle. With
the help of its handle, the pipe is revolved.

#5 Plumbers Wrench
Plumbers Wrench
The jaws of the plumber wrench are shaped like hexagonal nuts. It is similar to the design of the
plier’s wrench. The jaws are adaptable to fit a type of pipe fittings. It is particularly used in plumbing
for work on pipes and fixtures.

Checkout: Different Types of Axes & Their Uses [How To Use Them]

#6 Tap Wrench

Tap Wrench
This tap wrench is like a key, which fits the square drive of the tap, used to cut the female thread
(such as the inside of the nut). These wrenches can be T-shaped or have a double-handle bar with
an attachment socket in the middle.

#7 Spud Wrench
Spud Wrench
The spud wrench has fallen out of common use was this open-wrench spike at the opposing end
used to line the holes on the pipes. It has since been rendered obsolete by the plumber’s wrench,
even though it can still be found in the occasional toolbox.

#8 Alligator Wrench

Alligator Wrench
The top jaw of the alligator wrench is serrated, while the rear is smooth. The alligator wrench was
identified due to the way it gripped nuts.

The handle of this wrench looks more like a pointed fang than a modern pipe wrench. As these
were primarily manufactured to handle square-shaped heads, it has become rare to see them
outside of films.

#9 Basin Wrench
Basin Wrench
This type of wrench consists of a long T-shaped handle in a curved, serrated jaw. Its main purpose
is to tighten or loosen the heads under the sink and toilet, consequently, it is also known as a faucet
wrench.

#10 Armorer’s Wrench

Armorer’s Wrench
This armorer’s or single-piece wrench consists of a C-shaped, serrated head and involves a square
slot and or a hole to attach the ratchet handle.

They are available in many designs and are usually of the specific type or size of the model of gun.
These are used for gun repair and maintenance.

Read Also: Types of Clamps: Their Working and Uses [How To Use Guide]

#11 Dog Bone Wrench

Dog Bone Wrench
Each side of the dog bone wrench has two box-shaped ends that have a different socket size. This
wrench is named after its bone-shaped appearance, which is sometimes called the dumb-bell
wrench.

These are only used for bike maintenance, even though their ability to fit in small spaces sometimes
makes them useful elsewhere. Some dog bone wrenches have swivel heads for greater flexibility.

#12 Drum Key

Drum Key
A drum key or square-holly socket wrench consists of a T-shape with a flattened handle. As the
name suggests, it is used to tune different percussion instruments, such as drums. A drum key with
longer handles provides you to apply more torque than shorter handles.

#13 Bung Wrench

Bung Wrench
A drum wrench is a socket-style wrench available in a variety of styles. It is also known as a drum
plug wrench. It was specifically manufactured to eliminate the plastic or metal dung (cap) on a drum
or barrel.

#14 Fan Clutch Wrench

Fan Clutch Wrench
These flat clutch wrenches consist of a U-shaped opening at one end. They are specially designed
to remove fan clutches on cars.

Any of this type of wrench has a square opening at the other end, providing them to double as a
clutch hold tool, while a second wrench is used to turn the hex nut.

#15 Hammer Wrench

Hammer Wrench
A hammer wrench is a short, thick wrench that has a block end that is used to strike with a hammer
to transmit a greater amount of force. It is also known as a striking wrench.

It is used to tighten large flange fittings and fasteners. A Hammer wrench is also used to release
stuck or rusted nuts and bolts through high force. This heavy-duty wrench is used in some metal,
plumbing, or electrical jobs.

Read Also: The Essential List of Welding Tools and Equipments [Explained]

#16 Torx Key

Torx Key
This Torx key wrench is manufactured to fit into the star-shaped head of some bolts and screws. It
is also sometimes known as a star-headed key.

#17 Cone Wrench

Cone Wrench
These wide and flat wrenches are used on the conical part of a cup and cone hub. It is used to
accommodate the leveling feet of a bicycle or washing machine but is sometimes used on other
gentle projects where a typical open-ended wrench is too thick.

#18 Garbage Disposal Wrench

Garbage Disposal Wrench
Many models come with a larger type of Allen wrench, which is used to dislike clogs. There are two
types of wrench that are used for clogged waste disposal.

To handle larger nuts, another type of flat wrench with a squat, U-shaped head is pivoted. This latter
also used to dislike clogs in cutter variants, exactly like the Allen variants.

#19 Tension Wrench

Tension Wrench
A tension wrench is the “key” element in the lock and can be available in a broad range of designs.
They can be hard or soft and are used to apply tension, while the pick does its job.

If you have ever seen someone lift a lock in a movie or video game and wonder why they only move
one of the two tools, the stable is a tension wrench.

#20 Spoke Wrench

Spoke Wrench
The spoke wrench is small in size, they are designed to maintain spokes on the wire wheels. One
end consists of a slot that fits around the spoke, during the other end has a drive head that fits
around the nipple nut.

This type of wrench can be rotated in a full cycle without removing it due to its size and shape. The
place to find this tool is a bike repair shop. Some changes resemble a small open wrench, while
some look more like curved, flat metal.

#21 Spanner Wrench

Spanner
Wrench
The spanner wrench is a special specific class of equipment that has a curved end that can
resemble a hook or C-shape. These types of wrenches consist of pins that permit them to be used
on a wide variety of objects, ranging from spanner head screws to retainer rings.