TECHNICAL DATA SHEET

Liner Hanger 7.000 in x 9.625 in Hydraulic WPHS 29-38/40-53.5# Vam

DIMENSIONS
Max OD 212.090 mm 8.350 in
Cylinder OD 209.652 mm 8.254 in
Gauge OD 212.090 mm 8.350 in
Cone OD 211.680 mm 8.334 in
Min ID 154.280 mm 6.074 in
Overall Length 2,070.1 mm 81.5 in
Piston Area 3490.000 mm² 5.420 in²
BYPASS 9-5/8" 40 #
Cyl bypass 5,060 mm² 7.85 in²
Gauge bypass 5,040 mm² 7.81 in²
Cone bypass 5,690 mm² 8.82 in²
Slips set bypass 3,260 mm² 5.05 in²
BYPASS 9-5/8" 53.5 #
Cyl bypass 2,420 mm² 3.76 in²
Gauge bypass 2,400 mm² 3.72 in²
Cone bypass 3,050 mm² 4.73 in²
Slips set bypass 2,080 mm² 3.22 in²
Ratings
MatrSpec L80
Body yield 552 MPa 80,000 psi
Burst 75.7 MPa 10,970 psi
Collapse 66.5 MPa 9,650 psi
Cyl yield 655 MPa 95,000 psi
Cyl burst 62.2 MPa 9,020 psi
Cyl collapse 56.8 MPa 8,240 psi
Tension 2,530 kN 569 kip
Activating Pressure Range 0 - 16 MPa 0 - 2300 psi
Max. torque 98,448.4 Nm 72,615.6 ft-lb
Max load on csg 9-5/8" 40 # (80K) 2,150 kN 483 kip
Max load on csg 9-5/8" 53.5 # (80K) 2,200 kN 494 kip
API CSG RATINGS (L80)
Burst 7-" 29 # 56.3 MPa 8,160 psi
Collapse 7-" 29 # 48.4 MPa 7,030 psi
Burst 7-" 38 # 74.5 MPa 10,800 psi
Collapse 7-" 38 # 78.5 MPa 11,390 psi

Note 1: Casing threads and drill pipe connections ratings are not taken into account in above specifications.
Note 2: Uncontrolled if printed.
Note 3: All ratings are calculated at ambient temperature unless otherwise specified.

Print Date Part Number Rev Prepared By Status Page #

20-Mar-2021 00894042 B.1 St. Martin, Neal OK 1/1

The drawing contained in this datasheet is for illustrative purposes only. Details may be different on actual item.Weatherford products and services are subject to the Company¶s standard terms and conditions, available
on request or at weatherford.com. For more information contact an authorized Weatherford representative. Unless noted otherwise, trademarks and service marks herein are the property of Weatherford and may be
registered in the United States and/or other countries. Weatherford products named herein may be protected by one or more U.S. and/or foreign patents. For more information, contact [email protected].
Weatherford sells its products and services in accordance with the terms and conditions set forth in the applicable contract between Weatherford and the client

PDMSLICES 5.8.0.3- © 2021 Weatherford