Scribd
Upload
46 views

Lec 5

This document contains the course syllabus for Physics For Engineer taught by Engr. Muhammad Ahsan Khan at National University of Computer & Emerging Sciences – FAST during the Fall Semester of 2022. The syllabus lists the course code and title, and provides numerical problems related to determining tensions in cables, forces in ropes and cables, and equilibrium of trusses and beams. It also provides the instructor's name and date for each problem.

Uploaded by

k224900 Aliyan Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
46 views

Lec 5

This document contains the course syllabus for Physics For Engineer taught by Engr. Muhammad Ahsan Khan at National University of Computer & Emerging Sciences – FAST during the Fall Semester of 2022. The syllabus lists the course code and title, and provides numerical problems related to determining tensions in cables, forces in ropes and cables, and equilibrium of trusses and beams. It also provides the instructor's name and date for each problem.

Uploaded by

k224900 Aliyan Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

National University of Computer & Emerging

Sciences – FAST

Department of Electrical Engineering


Course Code : NS 1002

Course Title : Physics For Engineer

Instructor: Engr. Muhammad Ahsan Khan

Fall Semester 2022


Numerical Problems
 Determine the tension in cables BA and BC
necessary to support the 60-kg cylinder in the
following figure.

Muhammad Ahsan Khan 2022/9/21


Muhammad Ahsan Khan 2022/9/21
 The 200-kg crate in the following figure is
suspended using the ropes AB and AC. Each
rope can withstand a maximum force of 10 kN
before it breaks. If AB always remains horizontal,
determine the smallest angle θ to which the crate
can be suspended before one of the ropes
breaks.

Muhammad Ahsan Khan 2022/9/21


Muhammad Ahsan Khan 2022/9/21
Question
The crate has a weight of 550 lb. Determine the
force in each supporting cable.

Muhammad Ahsan Khan 2022/9/21


Question
If the 5-kg block is suspended from the pulley B
and the sag of the cord is d = 0.15 m, determine the
force in cord ABC . Neglect the size of the pulley.

Muhammad Ahsan Khan 2022/9/21


Question
The members of a truss are pin connected at joint
O. Determine the magnitudes of F1 and F2 for
equilibrium. Set θ = 60.

Muhammad Ahsan Khan 2022/9/21


Question
The beam has a weight of 700 lb. Determine the
shortest cable ABC that can be used to lift it if the
maximum force the cable can sustain is 1500 lb.

Muhammad Ahsan Khan 2022/9/21


Question
The members of a truss are connected to the
gusset plate. If the forces are concurrent at point O,
determine the magnitudes of F and T for
equilibrium. Take θ = 300.

Muhammad Ahsan Khan 2022/9/21


Question
The gusset plate is subjected to the forces of four
members. Determine the force in member B and its
proper orientation θ for equilibrium. The forces are
concurrent at point O . Take F = 12 kN.

Muhammad Ahsan Khan 2022/9/21

You might also like