Scribd
Upload
64 views2 pages

Chisorb Suv

1. Chisorb SUV is a liquid ultraviolet light absorber that synergizes other UV absorbers for use in polymers like PU foams and TPU. 2. It exhibits full UV absorption, high relative absorptivity, good solvent solubility, resin compatibility, and low volatility. 3. Chisorb SUV is recommended at 1-4% for PU foams and 0.3-1.0% for TPU to provide effective UV protection.

Uploaded by

GİZEM D.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
64 views2 pages

Chisorb Suv

1. Chisorb SUV is a liquid ultraviolet light absorber that synergizes other UV absorbers for use in polymers like PU foams and TPU. 2. It exhibits full UV absorption, high relative absorptivity, good solvent solubility, resin compatibility, and low volatility. 3. Chisorb SUV is recommended at 1-4% for PU foams and 0.3-1.0% for TPU to provide effective UV protection.

Uploaded by

GİZEM D.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DOUBLE BOND CHEMICAL IND. CO., LTD.

DATA SHEET
UV ABSORBER

CHISORB SUV
Liquid ultraviolet light absorber for polymers

General ChisorbSUV is a powerful liquid synergist of ultraviolet light absorbers.


Characterized by its full range of UV absorption and higher relative absorptivity than
those of other absorbers, ChisorbSUV exhibits more effectively in the performance
of polymer protection. Due to better solvent solubility, good resin compatibility and
low volatility, ChisorbSUV is especially designed as an excellent weather fastness
aid for various polymers, particularly suitable for using in PU foams, TPU, etc.

Active ingredients : Synergist of benzotriazole UV absorbers


Composition

Appearance : Clear light yellowish liquid


Physical Data
Odor : Faint
Boiling Point : > 200C
Freezing point : < 0C
Specific gravity : ca.1.04 @20C

(g in 100 ml solvent @ 20C)


Solubility
Acetone : > 50
Ethyl acetate : > 50
Ethanol : > 50
Methl ethyl ketone : > 50
PEG (Mn=400) : > 50
Water : Nil

Appearance : Clear light yellowish liquid


Specification
Active Content : 98% min.
Volatile content : 2.0% max
Viscosity : 1,000 – 3,000 cps

Application ChisorbSUV imparts extremely effective in the protection of PU systems due to its
special synergistic composition, better polyol, resin compatibility and non-yellowing
property during processing and application stages. Furthermore, ChisorbSUV also
acts as an excellent UV absorber for the wide use range listed as below:
1. For PU foams, castings, leathers and films, the recommended dosage is around
1-4% based on polyol.
2. For Spandex, the typical use level is approximately between 0.5% and 1.0%
3. As for PU, Alkyd coatings and Phenolic varnishes, the proper loading
concentration is about 1.0 to 2.0% based on polymer.
4. TPU stabilization is achieved at about 0.3 to 1.0% loading.
5. The appropriate usage amounts of this product in PU adhesive application is
recommended around 0.3-0.5%
For the coating systems, when used in combination ChisorbSUV with Chisorb292,
the synergistic effect will be obtained.
Illustration

Fig. The yellowing effect of QUV exposure on PU foam with different


pretreatment
Formulation: PU foam with 3%UV Absorber (or without)/based
on polyol
Recipe: PPG 3000 : 100
TDI 80/20 : 65
Dabco 33LV : 0.2
Desmorapid SO : 0.2
Niax A : 0.1
Water : 4.0
UV absorber : 3.0
Exposure machine: QUV
Exposure time: each 12 hrs
o
Exposure temp. 60 C
Exposure lamp: UV 313
Absorber A: 101
Absorber B: A mixture as below
20% Benzenepropanoic acid, 3,5-bis(1,2-dimethyl-ethyl)-4-
hydroxy-,C7-C9 branched alkyl esters
40% 2-(2H-benzotriazol-2-yl)-6-dodecyl-4-methylphenol, linear branched
40% Bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate + methyl,
12,2,6,6-pentamethyl-4-piperidyl sebacate

Storage Should be stored in tightly closed containers and place in a cool, dark, dry and
well-ventilated areas. Avoid the exposure to direct sunlight.

HS Code 3812 30 20

Health and Safety Toxicity:


ORL-RAT LD50 : > 1,000 mg/kg
Information
Inflammability:
Flash point : > 100C
Decomposition temp. : > 225C
For detailed information please consult the corresponding material safety data sheets.

DOUBLE BOND CHEMICAL The information and recommendations contained herein are based on the current

Registered trademark state of our knowledge. However, no guarantee or warranty of any kind expressed or
Printed in Taiwan implied is made with respect to the information contained herein.

Revised date: Jul. 07, 2012

You might also like