Scribd
Upload
114 views

Process Engineer Surya-2

V. Bhanu Surya Teja is seeking a position as a Process Engineer with 5 years of experience in PCB manufacturing. He has certifications in PCB design software and IPC standards. His experience includes preparing work instructions, resolving production issues, implementing new products, programming pick-and-place machines, and reducing defects. He provides details of his technical skills and work history at various electronics manufacturing companies.

Uploaded by

prabu c
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
114 views

Process Engineer Surya-2

V. Bhanu Surya Teja is seeking a position as a Process Engineer with 5 years of experience in PCB manufacturing. He has certifications in PCB design software and IPC standards. His experience includes preparing work instructions, resolving production issues, implementing new products, programming pick-and-place machines, and reducing defects. He provides details of his technical skills and work history at various electronics manufacturing companies.

Uploaded by

prabu c
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

V BHANU SURYA TEJA +91 – 9533043033

Process Engineer(Smt manufacturing services) Hyderabad India


Professional experience:5 Years.
[email protected]


CERTIFICATIONS PROFILE SUMMARY
• PCB Designing Cadence Looking for Process Engineer job role in the part of reputed organization which
software Orcad & Allegro provides a steady career growth along with job satisfaction, challenges and give
Version 17.2. value contribution in the success of organization.
• IPC-A-610 Acceptability of
Electronics Assemblies. TECHNICAL TRAINING
EDUCATION • PCB Designing using Cadence software (Orcad & Allegro 17.2 Version).
• Electronics schematic diagrams creating in Orcad CIS capture.
• B.TECH(ECE)with 70% in • Electronics components Pads creations on Padstack editor.
2017. • FootPrint creations on PCB Editor.
• Diploma(ECE)with 84.49% • DRC and Net List Creation.
in 2014. • Errors Solving skills while creation of DRC and Netlist Creation.
• SSCwith73% in 2011. • Part creates according to IPC standards.
• Components package creation and PCB Board creation using allegro
SOFT SKILLS Software.
• Hard Worker • Generation of Gerber files.
• Punctual • Good understanding of electronic circuit and measurement techniques.
• Quick Learner • Proficient with OrCAD for schematic capture
• Dedication towards • Solid experience with PCB design and layout. Allegro experience
results • Design for manufacture
• Planner • Good knowledge in electronics background .

TECHNICAL SKILLS
• PCB Design WORK EXPERIENCE
• Microsoft Office Nov 2020 to Till date : BHAVYABHANU ELECTRONICS PRIVATE LIMITED wholly owned
Subsidiary of (ASTRA MICROWAVE PRODUCTS LIMITED) as a Process Engineer.

Key Result Areas:


• Preparing Work instructions(WI) & Process flow charts(PFC) for NPI(New
Product introduction) & Regular models.
• Good practical knowledge on Reflow profilers.
• Reflow oven operating (HELLER ME-1918 series).
• Verification of BOM’s.
• Online problem solving in production line and resolving Process issues.
• Involving in new product and process implementation.
• Programming & Operating of Pick & Place(YAMAHA YG12 & YG12F) &
Operating of Pick & Place (MYDATA) Machine.
• SMD(Surface mounting device) components package creation &
Components teaching.
• Knowledge on Rohs and Non-Rohs Solder pastes.
• Knowledge on ECN documents.
Sep 2019 to Nov 2020 : RADIANT APPLIANCES AND ELECTRONICS PRIVATE LIMITED as a
Process Engineer.
Key Result Areas:
 Preparing Sop(Standard operating procedure) & Process flow charts for
PERSONAL DETAILS NPI(New Product introduction) and Different customer’s of Regular
• DOB: 28th Aug 1996 models.
• Martial Status : Unmarried  Preparing Npi Reports for Every Npi and Engineering observation Reports.
• LanguagesKnown: English  Engineering Analysis Reports.
& Telugu  Daily Defect Training Observation Reports.
• Address: Hyderabad.
 Analyzing the problems and resolving skills for new product introduction
& Regular models..
 Creation, implementation and monitoring of Process plans that will ensure
product and customer requirements are satisfied.
 Increasing productivity & controlling defects in line by taking actions.
 Explaining the Tv assembly process to the Regular operators & New
operators for their stage.
 Preparing Wi(Work Instructions) for Npi models & regular models.
 By calculating time study & Lob(Line of balance) for new models & regular
models stabilize the line by adjusting Works and man power in line.

Feb 2018 to Sep 2019 : EMBEDDED IT SOLUTIONS INDIA PRIVATE LIMITED as a


Jr.Process Engineer.

Key Result Areas:


• Handling the process SMT & Backend line to reduce the process issues and
to improve the Yield and engineering quality of all running projects.
• Generate reflow machine profiles (Leadfree & lead) on every new products
in different PCB’s.
• Preparing documentation, reflow profile, printing machine parameters set
up, process flow chart for new product implementation (NPI).
• Solder paste and flux type selection with customer specifications.
• Hands on experience on PCB visual inspection and quality control.
• KOH-YOUNG (KY8020T) Solder paste inspection(SPI) machine programming
& operating.
• Analyze SMT printing defects such as solder bridging, insufficient solder,
excess solder, solder spikes and tombstone to determine likely failure
modes.
• Operating on X-RAY (NORDSAN) machine and identify the solder defects.
• Reflow oven operating (JT Series RS 10000N, JTU & OMNIES SPEED LINE
TECHNOLOGY).

Declaration.

hereby certify that all the information provided above is true to the best of my
knowledge.

Date:
Place (V.Bhanu Surya Teja)

You might also like