Product Datasheet

ExxonMobil™ LLDPE LL 6101 Series Molding

Linear Low Density Polyethylene Resin

Product Description
LL 6101 series are medium flow LLDPE grades, which offer excellent stiffness, heat distortion resistance and good environmental stress crack
resistance. The excellent toughness and ESCR make LL 6101 grades an excellent blend partner for HDPE, where it can enhance the ESCR of items
like buckets and lids.

General
Availability 1 • Africa & Middle East • Asia Pacific • Europe
Additive • LL 6101RQ: Thermal Stabilizer: • LL 6101XR: Thermal Stabilizer:
Yes Yes
Applications • Bottle Caps • Door Mats • Lids
• Compounding (RQ version) • Dust Bins
• Containers • Large Part Housewares
Revision Date • 04/01/2017

Resin Properties Typical Value (English) Typical Value (SI) Test Based On
Density 0.924 g/cm³ 0.924 g/cm³ ASTM D1505
Melt Index (190°C/2.16 kg) 20 g/10 min 20 g/10 min ExxonMobil
Method
Peak Melting Temperature 251 °F 122 °C ExxonMobil
Method

Thermal Typical Value (English) Typical Value (SI) Test Based On

Vicat Softening Temperature 201 °F 94 °C ISO 306

Molded Properties Typical Value (English) Typical Value (SI) Test Based On
Tensile Stress at Yield 1500 psi 10 MPa ISO 527-2/1A/50
Tensile Strain at Yield 20 % 20 % ISO 527-2/1A/50
Tensile Strain at Break > 100 % > 100 % ISO 527-2/1A/50
Flexural Modulus 37000 psi 260 MPa ISO 178
Environmental Stress-Crack Resistance ASTM D1693
122°F (50°C), 10% Igepal 20 hr 20 hr

Impact Typical Value (English) Typical Value (SI) Test Based On

Notched Izod Impact Strength 23 ft·lb/in² 47 kJ/m² ISO 180/1A

Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.

Processing Statement
Molded properties were measured on 2 mm (78.7 mil) thick compression molded plaques prepared based on ASTM D 4703 Procedure C 15C/min:
ESCR 3 mm plaques, notch condition A.

Notes
Typical properties: these are not to be construed as specifications.
1Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete
Country Availability.

Effective Date: 04/01/2017 ExxonMobil Page: 1 of 2

Product Datasheet

ExxonMobil™ LLDPE LL 6101 Series Molding

Linear Low Density Polyethylene Resin

For additional technical, sales and order assistance: www.exxonmobilchemical.com/ContactUs

©2022 ExxonMobil. ExxonMobil, the ExxonMobil logo, the interlocking “X” device and other product or service names used herein are trademarks of
ExxonMobil, unless indicated otherwise. This document may not be distributed, displayed, copied or altered without ExxonMobil's prior written
authorization. To the extent ExxonMobil authorizes distributing, displaying and/or copying of this document, the user may do so only if the document
is unaltered and complete, including all of its headers, footers, disclaimers and other information. You may not copy this document to or reproduce it
in whole or in part on a website. ExxonMobil does not guarantee the typical (or other) values. Any data included herein is based upon analysis of
representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when
not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not
represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent
infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely
responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability
for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in
this document. This document is not an endorsement of any non-ExxonMobil product or process, and we expressly disclaim any contrary implication.
The terms “we,” “our,” "ExxonMobil Product Solutions" and "ExxonMobil" are each used for convenience, and may include any one or more of
ExxonMobil Product Solutions Company, Exxon Mobil Corporation, or any affiliate either directly or indirectly stewarded.

exxonmobilchemical.com

Effective Date: 04/01/2017 ExxonMobil Page: 2 of 2