Scribd
Upload
246 views

CR39W (HPNB)

Paralloy CR39W is a chromium nickel alloy used in high temperature applications up to 1100°C. It has good creep strength, resistance to carburization, and ductility. The alloy is used in castings and tubes for pyrolysis plants and furnaces. It has high chromium and nickel contents which provide strength and resistance to carburization, while low carbon improves ductility during heating. The alloy can be readily welded.

Uploaded by

Jean-Noël Leroux
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
246 views

CR39W (HPNB)

Paralloy CR39W is a chromium nickel alloy used in high temperature applications up to 1100°C. It has good creep strength, resistance to carburization, and ductility. The alloy is used in castings and tubes for pyrolysis plants and furnaces. It has high chromium and nickel contents which provide strength and resistance to carburization, while low carbon improves ductility during heating. The alloy can be readily welded.

Uploaded by

Jean-Noël Leroux
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

OONCAS E S

PARAL.L.QY

CR39W NOMINAL COMPOSITION %


25/35 Cr/Ni Nb 0.1 % C
C Si Mn Cr Ni Nb
Cast Heat Resisting Alloy 0.1 1.3 1 25 35 1.2

APPLICATIONS

Because of the attractive combination of creep


strength, carburisation resistance and ductility,
PARALLOY CR39W is widely used in many
applications in high temperature pyrolysis plants
including ethylene furnaces up to 1100°C.

The alloy is used for cast fittings including


"wyes", "elbow bends", "return bends" and
"tees". CR39W centrifugai cast tubes are also
an excellent choice for pyrolysis coits and
transfer lines subjected to thermal stresses.
CR39W tube may also be supplied formed into
"swept bends" or "cranked" tube sections for
specific furnace designs.

Paralloy CR39W is also recommended for heat


treatment furnace fixtures or any equipment
subjected to temperature cycling.

DESCRIPTION

PARALLOY CR39W is a low carbon, weldable


chromium nickel, niobium-bearing heat resisting
steel developed from PARALLOY H39W (25/35-
Cr/Ni + Nb: 0.4% Cl.

The high chromium and nickel content means


that CR39W combines the superior strength and
carburisation resistance with the added
attraction of increased ductility due to the low
carbon content. This improved ductility
minimises the effects of high temperature
carburisation and thermal stresses.

The alloy is readily welded by metal arc


(SMAW) or inert gas shielded arc (GTAW,
GMAW) welding processes using matching filler
material.

PHYSICAL PROPERTIES

Coefficient of Thermal Thermal Density Young's Modulus Specifie


Expansion Conductivity (kg/m') (N/mm' x 10') Heat
(mm/mm OC) (W/m OK) (J/KgK)

20-100 oC - 14.5 x 10.6 100 oC -13.4 7.97 X 10 3 20 oC -158.5 502


20-750 oC -17.5 x 10.6 750 oC - 26.0 800 oC - 108.2
20-1000 oC - 18.5 x 10.6 1000 oC - 31.5 1000 oC - 95.1
ROOM TEMPERATURE ELEVATED TEMPERATURE TENSILE PROPERTIES
TENSILE PROPERTIES (Typical Values)
(Minimum Values)
Temperature UTS Proof Stress Elongation (%)
UTS (N'mm') 448 (oC) (N'mm') 0.2%
(N'mm')
Proof Stress 186 750 275 125 36
0.2% (N'mm') 850 150 101 44
950 83 74 54
Elongation (%) 25
1050 55 45 62

OXIDATION RESISTANCE CARBURISATION RESISTANCE

12

~\
~
.?:'
E 0.8 c: ~
E o~
c: .c °
0.6 ~ 'i
~ u-
~
0.4
4i
c: 2
Cl
Q. 0.2
2.5 3

900
fJOO
lfJO
Temp oC

Tested in air Gas carburisation tests by NPL: 1200Hrs @ 1050°C

_al sor 10.' Il''1 1-' 0-: 01 I-'a alloy C 39""

r r
r
10. r'l' ..la:-: +,.; 1.65 S ev
-
Il]
CL
--- .
-=-:-:r-- -;

----- --.... _--


ï -
- t----
--------+-_-
"la - - .. _ -r-
I -- -=-:::----L
-~ -=--

'1 -
JO J4 36 3

Note: Creep curves may be subject to periodic review as new test data is added.

Paralloy House, Nuffield Road, Billingham, Cleveland TS23 4DA, UK Tel: 44 (0) 1642 370686 Fax: 44 (0) 1642
564811. A division of Deritend International Limited registered in England No. 450905, at 28-30 Derby Road, Melbourne,
Derbyshire DE73 8FF UK. A Doncasters Group Limited company.

You might also like