9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Started on Saturday, 24 September 2022, 12:51 AM

State Finished
Completed on Saturday, 24 September 2022, 12:56 AM
Time taken 5 mins 15 secs
Marks 35.00/35.00
Grade 100.00 out of 100.00

Question 1

Correct

Mark 1.00 out of 1.00

Which
of the following OSI model layers have the same functionality as the network
access layer in the TCP/IP model? (Choose two.)

Select one or more:

a. Physical


b. Application

c. Network

d. Data
link


e. Session

f. Transport

g. Presentation

Your answer is correct.

Question 2
Correct

Mark 1.00 out of 1.00

What
is the name given to a one-to-many message delivery option?

Select one:
a. Manycast

b. Broadcast

c. Unicast

d. Multicast


Your answer is correct.

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 1/17
9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Question 3

Correct

Mark 1.00 out of 1.00

What
command will prevent all unencrypted passwords from displaying in plain text in
a configuration file?

Select one:
a. (config)
# service password-encryption


b. (config)
# enable secret Secret_Password

c. (config-line)
# password secret

d. (config)
# enable secret Encrypted_Password

e. (config)#
enable password secret

Your answer is correct.

Question 4
Correct

Mark 1.00 out of 1.00

Which
organization is responsible for developing communications standards for Voice
over IP (VoIP) devices?

Select one:
a. The
Telecommunications Industry Association (TIA)


b. The
Electronics Industry Alliance (EIA)

c. The
International Telecommunications Union-Telecommunications Standardization
Sector (ITU-T)

d. The
Internet Corporation for Assigned Names and Numbers (ICANN)

Your answer is correct.

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 2/17
9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Question 5

Correct

Mark 1.00 out of 1.00

What
is the purpose of protocols in data communications?

Select one:
a. specifying
the device operating systems that will support the communication

b. specifying
the bandwidth of the channel or medium for each type of communication

c. providing
the rules required for a specific type of communication to occur


d. determining
the electronic specifications to enable the communication

Your answer is correct.

Question 6
Correct

Mark 1.00 out of 1.00

In fiber optic meda,

the signals are represented as patterns of light  .

Question 7
Correct

Mark 1.00 out of 1.00

Which
OSI reference model layer is responsible for common representation of the data
transferred between application layer services?

Select one:
a. Application

b. Transport

c. Presentation


d. Network

e. Data
link

f. Physical

g. Session

Your answer is correct.

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 3/17
9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Question 8

Correct

Mark 1.00 out of 1.00

Which
message delivery option is used when all devices need to receive the same
message simultaneously?

Select one:
a. unicast

b. multicast

c. broadcast


d. duplex

Your answer is correct.

Question 9
Correct

Mark 1.00 out of 1.00

Which
organization develops the 802 family of standard for wired and wireless LANs
and MANs?

Select one:
a. ITU-T

b. ISO

c. IANA

d. ISOC

e. IEEE


Your answer is correct.

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 4/17
9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Question 10

Correct

Mark 1.00 out of 1.00

Which
of the following elements do both human and computer communication systems have
in common? (Choose three.)

Select one or more:

a. Source


b. Default
gateway

c. Channel


d. Receiver


e. Keyboard

Your answer is correct.

Question 11
Correct

Mark 1.00 out of 1.00

Which
TCP/IP model layer is responsible for providing the best path through the
network?

Select one:
a. Internet


b. Application

c. Network
Access

d. Transport

Your answer is correct.

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 5/17
9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Question 12

Correct

Mark 1.00 out of 1.00

What
is an advantage of using standards to develop and implement protocols?

Select one:
a. Products
from different manufacturers can interoperate successfully


b. Different
manufacturers are free to apply different requirements when implementing a
protocol

c. Standard
provide flexibility for manufacturers to create devices that comply with unique
requirements

d. A
particular protocol can only be implemented by one manufacturer

Your answer is correct.

Question 13
Correct

Mark 1.00 out of 1.00

What
name is given to a group of interrelated protocols necessary to perform a
communication function?

Select one:
a. Functional
protocol

b. Protocol
stack

c. Functional
collection

d. Protocol
suite


Your answer is correct.

Question 14
Correct

Mark 1.00 out of 1.00

A
loopback  address is defined as a reserved address that routes packets back to
the host

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 6/17
9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Question 15

Correct

Mark 1.00 out of 1.00

Which
two statements are true of the deterministic access method?(Choose two.)

Select one or more:

a. Devices
take turns transmitting


b. The
throughput is predictable


c. Each
device has to transmit before passing the token to the next device

d. The
order of transmission is dictated by the node that asks first for the token

e. It
is a very efficient method because there are no collisions

Your answer is correct.

Question 16
Correct

Mark 1.00 out of 1.00

Which
two factors influence the method that is used for media access control? (Choose
two.)

Select one or more:

a. how
signals are encoded by the NICs on end devices

b. how
the IP protocol forwards the packet to the destination

c. how
connection between nodes appears to the data link layer


d. how
nodes share the media


e. how
data is generated by end devices applications

Your answer is correct.

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 7/17
9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Question 17

Correct

Mark 1.00 out of 1.00

What
happens when two devices on the same subnet are communicating?

Select one:
a. The
sending device will use ARP to determine the IP address of the receiver

b. The
frame will be sent to the default gateway for delivery to the receiving device

c. The
host portion of the IP addresses will be different


d. The
data link layer addresses are added to the IP header

Your answer is correct.

Question 18
Correct

Mark 1.00 out of 1.00

What
organization is responsible for the overall management and development of
Internet standards?

Select one:
a. IAB


b. ISO

c. IRTF

d. IEEE

e. IETF

Your answer is correct.

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 8/17
9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Question 19

Correct

Mark 1.00 out of 1.00

Which
message timing factor impacts how much information can be sent and the speed at
which it can be delivered?

Select one:
a. Flow
control


b. Delay
speed

c. Response
timeout  

d. Access
method

Your answer is correct.

Question 20
Correct

Mark 1.00 out of 1.00

What type of protocol describes communication over a data link and the physical
transmission of data on the network media?

Select one:
a. Application
protocol

b. Network
access protocol


c. Transport
protocol

d. Internet
protocol

Your answer is correct.

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 9/17
9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Question 21

Correct

Mark 1.00 out of 1.00

Which
two message timing mechanisms are used in data communication? (Choose two.)

Select one or more:

a. response
timeout


b. encoding

c. formatting

d. encapsulation

e. flow
control


Your answer is correct.

Question 22
Correct

Mark 1.00 out of 1.00

Which
organization is responsible for the standard that defines Media Access Control
for wired Ethernet?

Select one:
a. IAB

b. ISO

c. IEEE


d. ISOC

e. IETF

Your answer is correct.

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 10/17
9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Question 23

Correct

Mark 1.00 out of 1.00

What
is and advantage of using standards to develop and implement protocols?

Select one:
a. Different
manufacturers are free to apply different requirements when implementing a protocol

b. Products
from different manufacturers can interoperate successfully


c. Standards
provide flexibility for manufacturers to create devices that comply with unique
requirements

d. A
particular protocol can be implemented by one manufacturer

Your answer is correct.

Question 24
Correct

Mark 1.00 out of 1.00

Which
logical address is used for delivery of data to a remote network?

Select one:
a. destination
MAC address

b. source
IP address

c. destination
IP address


d. source
MAC address

e. destination
port number

Your answer is correct.

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 11/17
9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Question 25

Correct

Mark 1.00 out of 1.00

What
three functions are defined by network protocols to allow communication between
known source and destination IP addresses? (Choose
three.)

Select one or more:

a. data
encoding


b. connector
specifications

c. message
size


d. media
selection

e. end-device
installation

f. delivery
options


Your answer is correct.

Question 26
Correct

Mark 1.00 out of 1.00

Which
application layer protocol allows users on one network to reliably transfer
files to and from a host on another network?

Select one:
a. FTP


b. TFTP

c. DHCP

d. HTTP

e. IMAP

Your answer is correct.

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 12/17
9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Question 27

Correct

Mark 1.00 out of 1.00

Which
statement is correct about network protocols?

Select one:
a. They
are only required for exchange of message between devices on remote network

b. They
define how messages are exchanged between the sources and the destination


c. They
all function in the network access layer of TCP/IP

d. Network
protocols define the type of hardware that is used and how it is mounted in
racks

Your answer is correct.

Question 28
Correct

Mark 1.00 out of 1.00

Which
of the following are examples of proprietary protocols? (Choose two.)

Select one or more:

a. TCP/IP

b. Novell
NetWare


c. AppleTalk


d. ISO

Your answer is correct.

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 13/17
9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Question 29

Correct

Mark 1.00 out of 1.00

What
will a network administrator use to modify a configuration on a Cisco router?

Select one:
a. the
Windows command prompt

b. Windows
Explorer

c. a
DHCP server

d. a
control panel

e. IOS


Your answer is correct.

Question 30
Correct

Mark 1.00 out of 1.00

Which
two components are added to the PDU at the network access layer? (Choose two.)

Select one or more:

a. IP
header

b. TCP
header

c. frame
header


d. Trailer


e. HTTP
header

Your answer is correct.

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 14/17
9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Question 31

Correct

Mark 1.00 out of 1.00

What
happens to frames that are too long or too short for the channel used?

Select one:
a. They
are delivered but much slower than proper-size frames.

b. They
clog the network and block the delivery of other frames.

c. They
are broken up into smaller pieces.

d. They
are returned to the sender.

e. They
are dropped.


Your answer is correct.

Question 32
Correct

Mark 1.00 out of 1.00

Which
two statements are true regarding the user EXEC mode? (Choose two.)

Select one or more:

a. Interfaces
and routing protocols can be configured

b. All
router commands are available

c. Only
some aspects of the router configuration can be viewed


d. Global
configuration mode can be accessed by entering the enable command

e. This
is the default mode on an unconfigured router when first powered up.


Your answer is correct.

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 15/17
9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Question 33

Correct

Mark 1.00 out of 1.00

What
is the transport layer PDU?

Select one:
a. Data

b. Bit

c. Frame

d. Segment


e. Packet

Your answer is correct.

Question 34
Correct

Mark 1.00 out of 1.00

Which
is a function of the Logical Link Control (LLC) sublayer?

Select one:
a. to
provide data link layer addressing

b. to
identify which network layer protocol is being used


c. to
accept segments and package them into data units that are called packets

d. to
define the media access processes that are performed by the hardware

Your answer is correct.

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 16/17
9/24/22, 12:56 AM Prelim Quiz 2: Attempt review

Question 35

Correct

Mark 1.00 out of 1.00

Which
of the following TCP/IP protocols exist at the transport layer of the TCP/IP
reference model? (Choose two.)

Select one or more:

a. TCP


b. DNS

c. FTP

d. UDP

e. HTTP

Your answer is correct.

semestral.amaes.com/2212/mod/quiz/review.php?attempt=16203&cmid=11767 17/17