A10 VERTICAL MACHINING CENTER

A10
VERTICAL MACHINING CENTER
High-rigidity Structure
•Headstock, Body, Saddle, Base, and Work Table all use superior grade of cast iron. All are
stress relieved to ensure maximum accuracy and absolute rigidity.
•Spindle Headstock Design utilizes box shape design, internally ribbed reinforcement for
highest rigidity maximum stability, ideal for heavy-duty machining.
•Two Guide Way base along with wide stance column design greatly increase contact surface
between Column and Machine Base, which reinforce greater head support. Column is heavily
ribbed with cell shaped structure internally to minimize twisting deformation during machining.

X/Y/Z : 
1020/560/510mm (40.16"/ 22.05"/ 20.08" )
24 Tool Magazines (BT-40/CAT-40)

8,000 RPM(Belt Driven)

With Optional Accessories

1
High-rigidity Structure
Long Nose End Belt-Driven Spindle
Two different spindles with special headstock design.
8,000 / 10,000 RPM are available with dynamically balanced
pulleys working with special Hi-Torque HTD belt to prevent any
slippage and to ensure smooth high-speed rotation. Heat and noise
generated during high-speed operation are dramatically reduced. 46

High Speed Direct-Driven Spindle

• Wide stretch design with precision angular spindle bearings.
Design specially for high speed and high precision.
•10,000 / 12,000 / 15,000 RPM Direct driven spindle produce
low noise, low vibration, and excellent surface finish.

560mm

Enhance Base Design 1110mm

The ball-rail linear guide ways along with wide stance column
design greatly increase contact surface between column and
machine base, which reinforce greater head supports.
Roller-rail linear guide ways are also available.(Option)

650mm

1150m
m

2
 Three Chip Augers Design
Instead of using a costly chip conveyor, the special three chip augers system efficiently
removes metal chips produced during machining.

63mm

Fluorescent Light & Quartz Work Light

The fluorescent light is installed with the fully enclosed splash guard and it is
located on the left hand corner, and the quartz work light is installed on the right
hand upper corner to provide a well-lit table area.
586mm
510mm

684mm

Precision Ball-Rail or Roller Rail (option) Linear Guideways

and C3 Class Ball Screws for Three Axes
Linear Guide ways are used on all three axes. Because of their high rigidity, low
noise, and low friction, this helped to achieve high-speed rapid movement and
excellent circular accuracy.
Double nut C3 class precision ballscrews are used on all three axes. Along with
pretension double nut and supports to minimize the backlash and to compensate
for error caused by temperature differences in order to maintain positioning
accuracy.

mm
406

m
0m
189

3
 24 Tools Magazine Hinged-Belt Chip
A rapid arm-type tool changer Conveyor (Option)
is driven with a This allows for rapid and
precision cam, maintaining efficient chip removal during
tool-changing accuracy of machining in order to
0.01mm, which in turn will help maintain a clean machine.
maintain long-term spindle
clamping accuracy.

Control Panel Oil Circulating Cooling

The control panel swivels System for Spindle
for easy use and also has a A high efficiency spindle cooling
remote MPG for fast manual system dissipates running induced
operation. heat generation in order to
maintain spindle accuracy and
prolong spindle life.

Electric Cabinet with Chip Remover

Heat Exchanger Equipment
All electrical components are Automatic base-box chip
in compliance with safety remover equipment which is very
rules and regulations. easy to remove the chip even the
All components inside the machine is under running.
cabinets are clearly labeled
and identified for easy of
trouble-shooting.

Calibration with CESMB Type Resistance

Laser Interferometer Electric Lubricator
was Performed and It is tested and verified by TUV
Certified by PMC Rheinland in Taiwan and had passed
All of our machines are CE of Machinery Safety Directive
calibrated according to the (MSD 89/392/EEC) and Low
"VDI 3441 3δ" standard. Voltage Directive (LVD 73/23/EEC).
Calibration is performed for full It conforms to UN’s requirement
travel length for each axis. Each of ”Necessary Safety, Hygienic
measurement is taken six times Regulation. ” It has a fixed interval
to ensure the most consistent time and discharge volume. Has a
and accurate reading. float switch for checking the oil level.
Automatic Lubrication system(option)

4
 Mode A-10 Standard Accessories:
1. Fanuc 0iMD Controller
Spindle Taper No. 40 2. Arm Type 24 Tools ATC
Spindle Transmission Belt(std)/Direct Driven(opt.) 3. Fully Splash Guard
4. Spindle Air Blast
Spindle Speed r.p.m 8,000/12,000/15,000
5. Oil Circulating Coolant System for Spindle
Table Size mm 1,100x560 6. Cutting Coolant Equipment
T-Slot Size mm 5x18x120 7. Three-color Indicator Light
Table 8. Fluorescent Light & Quartz Work Light
Work Area mm 1,020x560
9. Resistance Electric Lubrication Equipment
Max. Table Load kgs 650
10. Three Axes Slideways Protector
X/Y/Z Axis mm 1,020x560x510 11. Heat Exchanger for Electric Cabinet
Distance from Spindle 12. Tool Box w/Leveling Bolt
mm 150-660
Nose to Table
Travel & Distance from Spindle
13. One Year Warranty for Machine
mm 624 14. Auto Power Off
Feedrate Center to Column Ways
Rapid Traverse(X/Y/Z) m/min 32/32/28
15. RS-232 Interface
16. Rigid Tapping
Cutting Feedrate (X/Y/Z) m/min 1-10
17. Operation Manual
Tool Shank BT-40 18. Remote Manual Pulse Generator (M.P.G.)
Pull Stud MAS P40T-1 (45˚) 19. X Axis (Front Side 1pc) + Y Axis (2pcs) Screw Type Chip
Magazine Capacity 24
Augers
Max. Tool Diameter(With
20. Transformer (Exclude India, USA and Canada)
mm ø130 21. CE/CSA Electrical System
Adjacent Pocket Empty)
ATC Max. Tool Diameter (Full (For European/Canada Country Only)
mm ø80
Storage)
Max. Tool Length mm 300 Optional Accessories:
1. Roller-Rail Linear Guide Ways
Max. Tool Weight kgs 7
2. Fanuc 18iMB
ATC Type Arm Type 3. Armless 16 Tools ATC
7.5/11(10/15) (Belt)/ 4. BT-40 Belt Driven Spindle 10,000rpm
Spindle (Cont./30 min.) Kw(HP)
5.5/7.5(7.5/10)(Direct) 5. BT-40 Direct Driven Spindle 10,000/12,000/15,000rpm
X/Y/Z Axis Kw(HP) 3/3/4 (4/4/5.5) 6. Chip Conveyor
Motor
Lubrication Pump w 25 7. Coolant Through Spindle(20Bars/70Bars)
Coolant Pump w 460 8. Coolant Through Tool
9. Data Server
3.15"
(80)

Machine Height mm 2,664

10. AI Contour Control
1.22"(31.0)
Floor Space mm 2,250x2612 1 1. High Precision Contour Control
3.94"(100*5)
22.05"(560)

Misc. (HPCC) + Risc (F-18iMB only)

Machine Weight kgs 6,000
1.26"(32)
0.71"

0.71"
(18)

(18)

Control Fanuc 0iMD 12. 4th Axis Preparation

0.51"(13)
13. Rotary Table
•Specification is subject to change without further notice.
3.15"(80)

0.02"(0.5)
40.15"(1020)
43.3"(1100) 14. Renishaw TS-27R Tool Setup Probe (Tool Setter)
15. Automatic Lubrication System
3.15"(80)
102.28"(2598)
105.04"(2668)

1.22"(31)
83.66"(2125)
20.07"
(510)

0.02"(0.5)
A10: 22.05"(560)
101.92"(2589)
77.36"(1965)
104.88"(2664)

3.94"(100x5)

0.51"(13)
20.07(510)

90.75"(2305)
77.56"(1970)

0∞ 90∞
(150)
5.91"

270∞
180∞
0.71"(18)
1.26"(32)

0.71"(18)
3.15"(80)

29.49"(749) 86.61"(2200) 77.56"(1970) 40.15"(1020)

116.10"(2949) 97.44"(2475)
43.3"(1100)
29.92"(760) 88.58"(2250)
118.50"(3010) 82.87"(2105)
102.87(2612)

A PROFESSIONAL CNC MACHINE MANUFACTURER

AGMACHINE TECHNO CO., LTD

TEL: 04-24733326

Distributor :
No.7, Ln. 34, Zhuangqian Rd., Shengang Dist.,
Taichung City 42951, Taiwan (R.O.C.)
TEL:+886-4-25612868
FAX:+886-4-25610409 & 25613010
E-mail: [email protected]
11052505

http://www.agma.com.tw