LIVEPRO L1

Multi - format Video Mixer

Version: LIVEPRO L1 V1

USER MANUAL
Thank you for your purchasing our product!

In order to let you quickly grasp how to use this signal switcher, the

following is the detailed product instruction.You can read it and how to

use it before using the switcher. Please read all the information we

provide carefully, and brake you to use our products correctly.

Safety Instruction
1. The product can only use the specified power cable and interface.

And should be make sure the power cable is in good condition. To

change the specified power cable and interface, you need to find a

qualified technician.

2. Keep away from flammable and explosive materials, do not operate

this product in an explosive environment.

3.There is no customer self-operation service for this product, and

dangerous voltage may be exposed when the cover is removed. To

prevent personal accidents, please do not untie the upper cover by

yourself.

4. Please do not use chemical solutions to clean this product.

Please wipe the switcher with a clean soft cloth to maintain the
brightness of the surface.
5. No adjustable components are in the switcher. Please do not take
apart or repair the unit by yourself, to avoid the damage of the
product.

1
Features
 USB capture video complying with UVC for live streaming

 4 CH HDMI inputs

 2” TFT display on board to live preview 4 inputs

 Auto cut and manual switch (T-Bar)

 14 transition effects on T-Bar

 Support PIP (Picture-in-Picture)

 Audio offers embedded or external source to select

 Support switch between 6-picture PVW and PGM to HDMI out

 Chroma key

 Control by PC or Smart phone (via APP)

 Compact design

2
 CONTENTS
1. Production Instruction..................................................... 5

1.1 Product Overview............................................................. 5

1.2 System Connection.......................................................... 5

1.3 Front Panel....................................................................... 6

1.4 Fan Instruction------------------------------------------------------- 7

1.5 Interface Panel..................................................................8

2. Product Using................................................................... 8

2.1 MENU.............................................................................. 8

2.2 Main Menu...................................................................... 9

2.2.1 INPUT............................................................................ 9

2.2.2 HDMI............................................................................. 9

2.2.3 USB3.0......................................................................... 10

2.2.4 AUDIO.......................................................................... 10

2.2.5 IP SETTING..................................................................11

2.2.6 LANGUAGE..................................................................11

2.2.7 RESET...........................................................................11

2.2.8 INFO..............................................................................12

2.3 BUTTON SW....................................................................12

2.3.1 MIX................................................................................12

2.3.2 MODE............................................................................13

2.3.3 PIP.................................................................................13

3
2.3.4 FX.................................................................................14

3. Switch Input Source........................................................14

4. Software Operation.........................................................15

5. OBS Streaming............................................................... 24

6. Streaming Setting........................................................... 27

7. Upgrade.......................................................................... 28

8. Specification.................................................................. 30

4
1.Product Instruction
1.1 Product Overview
LIVEPRO L1 is a mini signal switcher and mixer which is able
stream 6-picture PVW or PGM from any one out of the 4 HDMI
inputs to any live broadcasting platform via the third party live
streaming software such as OBS. It adopts compact design,
equipped with a 2 inch TFT screen to preview the 4 inputs in real
time. 14 transition effects on board to collaborate with T-Bar to do
transition switching.

Along with feature of seamless switch, there are other outstanding

features such as audio embedding, de-embedding, and automatically
identify color depth of RGB 4:4:4, YUV 4:4:4，YUV4:22, YUV4:2:0. It is
also easy to operate either on board or on dedicated app XPOSE on
PC.

1.2 System Connection

LIVEPRO L1 System Connection Diagram

5
1.3 Front Panel

TFT display
To display 4 inputs and menu

PUSH/Y
1. Knob, turn to select menu item, push to confirm
2. Work as a quick button to switch HDMI Out between
6-Picture PVW and PGM when TFT is under the state of
previewing 4 inputs.
MENU
Menu and Back Button
SW
Function select button, to select transition effects (MIX),
Mode switching (Fast or T-Bar), PIP and FX (Chroma Key)
VOLUME/X
1. Turn to adjust volume of PGM (adjust after pressing
the knob to display the volume bar).
1,2,3,4
4 inputs, red is on air (PGM), static green is signal
standing by to switch, flash green is the ready to be
switched
T- Bar
Manual switch, push to left end or right end to switch
signal to PGM. If T-Bar doesn’t push to left end or right
end, the signal or effects can’t switch, the menu also can’t
operate.

6
1.4 Fan Instruction

7
1.5 Interface Panel

1 HDMI Output port, connect to display to show Preview

HDMI OUTPUT
(6 pictures) or PGM.

HDMI INPUT 4 HDMI inputs, connect to input source from HD camera or PC

DC 12V 1 DC Jack for power input, connect to 12V/1.5A power adapter

LAN Communication port to link dedicated software for control

USB3.0 output, capture signal via third party streaming software

USB
and push to live broadcasting websites.
AUDIO In, linear input interface, please use audio interface, device
of MIC to Line or connect to MIC interface of computer directly
AUDIO IN / OUT when connecting microphone;
AUDIO Out, audio output port, connect to loudspeaker, headset,
etc.

2. Product Using
2.1 MENU

When LIVEPRO L1 is power on, the native TFT display show starting up page.

8
2.2 Main Menu

The menu will automatically exit after about 5 seconds when there is no
operation.

2.2.1 INPUT

Push MENU and select the first menu item <Input>

Push knob to enter <Input> menu

2.2.2 HDMI

Push MENU and select the second menu item <HDMI>

Push knob to enter <HDMI> menu
HDMI means HDMI output, select Preview output and PGM output for HDMI.
Output: Preview or PGM
Format: 1920x1080x24/25/30/50/60, 1360x768x60, 1280x1024x60,
1280x720x50/60, 1280x768x60，1024x768x60

9
2.2.3 USB3.0

Push MENU and select the third menu item<USB3.0>

USB3.0 means USB3.0 output, push knob to enter <USB3.0>menu, select
Preview output and PGM output for USB3.0
Output: Choose PGM or Preview
Format: 1920x1080x24/25/30/50/60, 1360x768x60, 1280x1024x60,
1280x720x50/60, 1280x768x60，1024x768x60

2.2.4 AUDIO

Choose <AUDIO>
SOURCE: AFV,LINE IN, INPUT 1~4
AUDIO BAR: ON/OFF

Selecting the external or embedded audio source in the <AUDIO> menu

firstly when connecting or embedding audio.

The AUDIO IN interface is a linear input interface (LINE IN), this interface
can't receive the sound while connecting the microphone directly, you can use a
audio interface or amplifying device to slove this problem.

Solutions for live broadcasting audio problems :

1. If there is microphone and audio interface, please connect microphone to the
audio interface and connect the output interface of the audio interface to the
AUDIO IN interface of LIVEPRO L1.
2. If there is microphone without sound adapter, please connect the microphone

10
to the MIC interface of computer.
3. If there is wireless microphone and it with earphone interface, please connect
this interface to AUDIO IN of LIVEPRO L1.
Note: Because there are variety of wireless microphone, if you can’t use normally
when connect to the LIVERPRO L1 directly, please use it with audio interface or
amplifier.
4. If there is device of MIC to Line output, please connect to AUDIO IN of
LIVEPRO L1.

2.2.5 IP SETTING

Manually set IP address

DHCP: ON/OFF

2.2.6 LANGUAGE

LANGUGE, select Chinese or English

2.2.7 RESET

Reset: Yes or No

11
2.2.8 INFO

INFO: Show the SN, IP, MAC, MCU version and VIDEO version.

2.3 BUTTON SW
On LIVEPRO L1 push button SW, the TFT will show the transition effect menu
<MIX>. The <MIX> LED indication beside will light up. Push again, it will skip to
the next menu <MODE>, again to <PIP > and again to <FX> chroma key.

The LED indicators beside light up meaning the corresponding feature menu is
open. Use knob to select and confirm the desired items after it enters the menu.

2.3.1 MIX

Push button SW to open up the transition effect menu. Use knob to select the
desired transition effect icon and push the knob to confirm.
Cut Directly

Fade In/Out

Iris Box

Wipe to Right

Wipe to Bottom

Wipe to Bottom Right

12
 Iris Cross

Wipe to Left

Wipe to Top

Center Split Horizontal

Center Split Vertical

Cross Inwards

Blinds Vertical

Box Inwards

Iris Round

2.3.2 MODE

Keep pushing the button SW to open up MODE menu.

MODE: FAST or T-Bar
TIME: 0.5-5.0S
Choose FAST, the switching will be without transition effect but in set time.
Choose T-Bar, the switching will be with selected transition effect by pushing T-Bar.

2.3.3 PIP (Picture in Picture)

13
Push SW button 3 times to open PIP menu. PIP menu offers 9 layouts for main
picture and sub picture.
Press the “Volume/x” button on the left of panel to switch the A/B layer.
PIP operation
1. Decide which source to be the main picture, select and switch it to PGM when
PIP is OFF
2. Select the PIP layout mode in PIP menu
3. Select the input source and switch it to sub-picture on PGM
4. After switching, the selected green button turns to red

After PIP mode is selected, the main picture can not be changed unless
go back to choose PIP OFF and restart the above steps.

2.3.4 FX
CHROMA KEY

L1 supports matting the Chroma Key in the menu, removing the pure color
background and overlaying it on another signal to realize the application of virtual
reality. Matting can be done on the software “Feelworld Live” or simple settings
and adjustments can be made on the device.

Seeting on the device

(1)Turn ON CHROMA KEY
(2)Select the layer need matting, Layer A is background picture, Layer B is sub
picture
(3)Select the color to be removed, there are six kinds of color: Orange, Yellow,
Green, Cyan, Blue and Purple
(4)You can adjust Max, Min and Margin according to the actual need. The range
is form0 to 2880.

3.Switch Input Source

After selecting transition effect and switch mode
1 . Under Fast+Time mode, pushing green button will switch the input source in
the selected time with set transition effect. After switching, green turns to red.

14
 2 . Under T-Bar mode, pushing green button, it will flash and push T-Bar to the
end (left or right), the source will be switched with selected transition effect. After
switching, green turns to red.
Note: When T-Bar is not in the end position, no source can be selected

4.Software Operation
Connection Way
1. Connect the LAN port of the computer to the LAN port of LIVEPRO L1,
manually set the IP for the computer and LIVEPRO L1, you can connect
LIVEPRO L1 and the computer to the same LAN.

2. Connect the computer and LIVEPRO L1 to the same router, only need to set
the IP on LIVEPRO L1, you can connect the computer and LIVEPRO L1 to the
same LAN.

Install dedicated software named XPOSE to control LIVEPRO L1.

Right click the setup exe file .
Choose Run as administrator to open the exe and install the software.

After software is installed, click the icon and login the software. Click
SERACH to search LIVEPRO L1 device.

After searching, all available devices in the subnet can be found, up to 128
devices can found if there are.

15
Select the desired device by SN and IP and enter the management interface. The
software interface is a simulation of operation panel on real LIVEPRO L1 device.

For example, clicking Button M can open up menu as on the device. MIX and PIP
click via button S

16
INPUT INFO
In the【Input Info】you can check
the input resolution

HDMI Output
Output: PVW/PGM
Format: 1920×1080@60(max)
Click<Set>after confirm

USB3.0 Output
Output: PVW/PGM
Format: 1920×1080@60(max)

Click<Set>after confirm

17
Live Streaming
Capture Device: Choose FEELWORLD USB3.0 Capture
H.265: When it is ON, users can watch Preview or PGM streaming back on
XPOSE software. The streaming back content is subject to USB 3.0 output
setting.
Import the file path of the related OBS application if users need to do live
streaming, click Relate to confirm.
OBS: slide on to turn on the related OBS software .
Note: H.265 and OBS cannot work at the same time. User choose either H.265 or
OBS, not both.

Live Streaming
Capture Device: Choose FEELWORLD USB3.0 Capture
H.265: When it is ON, users can watch Preview or PGM streaming back on
XPOSE software. The streaming back content is subject to USB 3.0 output
setting.
Import the file path of the related OBS application if users need to do live
streaming, click Relate to confirm.
OBS: slide on to turn on the related OBS software .
Note: H.265 and OBS cannot work at the same time. User choose either H.265 or
OBS, not both.

18
AUDIO
AudioSource: AFV/Linein/input1,2,3,4
Audio Bar: ON/OFF

TEST PATTERN
To facilitate troubleshooting, Feelworld Live provides a test signal output, which
can be used to troubleshoot the USB or HDMI output interface when there is no
output signal from USB or HDMI.

Output: Select the USB/HDMI interface to be tested.

Test Pattern: Select the mode of the test pattern.
Color: Adjust color.

19
HDMI Output Setting
DVI/HDMI: Choose output type as DVI or HDMI, default is HDMI.
Bits: 8bit/10bit/12bit, default is 8bit.
Color Space: Video or Image, default is image.
DE On/Off: On/Off
DE H Pos: input value to adjust output horizontal position
DE V Pos: input value to adjust output vertical position
DE H Size: input value to adjust output horizontal size
DE V Size: input value to adjust output vertical size
DE H/V Polarity: ON/OFF

20
Password Protection
In order to solve the problem of control conflicts caused by different devices
controlling the same L1 in the same LAN, Feelworld Live provides a password
protection function, as an administrator, you can set a password for the device
controlling Feelworld Live, and when you control the interface again, you need to
enter the password to control it.
Note: If you have forgotten your password, please restore the factory settings on the Livepro
L1

Lan Port Set

In【Lan Port Set】, you can check current IP,
mask and gateway.
If you want to change the IP address,
mask and gateway, turn off DHCP
first and change the value.

21
Version Info
Show the version information

Language
There are 4 kinds of language: Chinese,
English, Russian and German.

T-Bar Calibration
If the T-Bar is not in the correct position, no other operation is possible. T-Bar
correction is available in Feelworld Live.

The steps are as follow：

1. Turn on the T-Bar Calibration switch.
2. Push the T-Bar to the far right side.
3. Turn on the "On" switch
4. Push the T-Bar to the far left side.
5. Turn on the "On" switch

Reset
Reset will remove all settings.

22
MIX
Mode: Fast/T-Bar
Time: 0.5s~5.0s
Layout: 15 kinds

PIP
There are 9 kinds of PIP layout

Chroma Key
(1) Click S button and FX, open Chroma Key menu, as shown in the picture
below:

23
(2) Turn ON Chroma key and select the base color to be removed.There are 6
kinds of colors you can select: orange, yellow, green, cyan, blue and purple.

(3) You can slide the bar to adjust MAX MIN MARGIN or fill in the data input box
to achieve a more precise keying effect.

Note: When using chroma key, make sure that the layer you want to edit is on the
top layer, which is the B layer in the PIP setting, otherwise you may not see the
chromakey effect.

5.OBS Streaming
LIVEPRO L1 is compatible with many third party steaming software, we
recommend OBS, which is available to download on
https://obsproject.com/download. Download the software and update to the
latest version.
1.Click”+”icon
2. Choose video capture device
3. Click video capture device to open up setting page
4. Choose : FEELWORLD USB 3.0 Capture
5. Choose Video Format YUY2

24
 If there is no video format YUY 2 after setting above, check the USB 3.0port
connection. Make sure it is linked to USB 3.0 port on PC by USB 3.0 cable. (USB
3.0 cable or port is standard in blue while USB 2.0 is in black)

If the captured video is showing mosaic, change the video format to YUY2.

25
Audio Setting
When there is no audio playing first check the video source see if the it is set in
default value and then check the audio setting on OBS.
1. Set Default for the audio source.

2. Audio setting on OBS.

Choose Audio, click Setting and choose audio device (Mic/Auxiliary Audio Device)

26
6.Streaming Setting
1. Find the UL and Live Streaming Code provided by streaming broadcast
website.
2. Copy rtmp address and broadcast code.
3. Back to OBS, click setting in the lower right corner and click “Stream”. Choose
Stream Type as “Custom Streaming Server” Paste the rtmp address to server and
broadcast code to stream key.
4. Click “Start Streaming”.
5. Go back to live broadcast website and check the broadcasting.

27
7.Upgrade
1. Tools：XTOOL software and upgrade cable

2.Upgrade Method: LAN port upgrade

2.1 Turn on the power of LIVEPRO L1 and use LAN cable to connect device.

2.2 The default IP is 192.168.0.99, so make sure the PC and device are in the
same IP segment, which means the IP of PC must be 192.168.0.XXX (but
must not be completely same as the device).

2.3 Open the upgrade tool XTOOL, click Connection

2.4 Choose Net Comm in pop up window and set IP address the same to the

28
switcher, then click confirm.

2.5 Upgrade Program

After communication setting is done, the status light in bottom left turns green.
Click Upgrade, the software will automatically upgrade the firmware.

2.5.1 After upgrade is done, there will pop up a window showing “New Version
Upgraded”, then users need to reboot the device to let the new version take
effect.

29
8.Specification
Input HDMI In 4×HMDI-A
HDMI Out 1×HMDI-A
Out
USB3.0 1×USB TypeA
Connections IN 1×3.5mm Stereo Jack
Audio
OUT 1×3.5mm Stereo Jack
Communication LAN 1×RJ45
Power 1×DC Jack
HDMI
SMPTE:720p@50/60|1080i@50/60|1080p@23/
24/30/50/60
Input VESA:1024X768@60|1280X720@60|1280X768
Resolutions @601280X800@60|1280X1024@60|1360X768
@60|1366X768@60|1440X900@60|1600X1200
@60|1680X1050@60|1920X1080@60|1920X
Performance 1200@60
HDMI
Output SMPTE:720p@50/60|1080p@24/25/30/50/60
Resolutions VESA:1024X768@60|1280X720@60|1280x768
@60|1280X1024@60|1360X768@60
Supported HDMI 1.3
Standards USB 3.0
Input Voltage DC 12V/1.5A
Power
Max Power 18W
Temperature -30℃～50℃
Environment
Humidity 10%~85%
Weight 500g
Physical
Dimension 190(L) x 110(W) x 43(H)mm

30