ROM2box userguide......

MediateK
1. Let's Start from Front Page....

• on front page you will find some basic controls + Mediatek Controls for fast Operations Just Mark
the Function and Click Start button

• Note: don't use fastboot functions when device is in ADB Mod & connected, if you do so then
fastboot.exe wait for a device which will cause a form lag

• for Mediatek function mark the check box and Click Start button, once it say waiting for device
Connect your Phone by togather Pressing volume up & down key (turn Phone off Press Volume
+ volume - key and Insert USB)

2. Firmware Flasher.

• have any issue with SP Flash tools, We use this Option. First Method is Flash.bin which is a
complete dump of device Storage (if you have a dump from mtk client or this tool)

• Second Option match Partition name and file name if it match it will write it to respective
section, navigate the main images folder and click flash, once ask connecrt device by pressing
volume up & down key

• Third option for single partition flashing, click Select file option select require file mark the
partition where to flash selected file click Flash, (wrong selection may brick yoiur device e.g
flashing recovery on boot partition)

3. Firmware Reader

• in the firmware Reader we have a List of partions and Firmware, select what to Read and Click
'START' button

• Note: if a file is Readed it will be saved to Main tool folder

• if all Partitions are readed you can collect them in ROM2box/out Folder

4. SP Flash tools:

• First option is official SP Flash tools from Mediatek Inc..

• Second option for Flashing Scatter Firmware via fastboot mod, it is suitable for A Only (single
slot ) devices, i have not test it on a dual Slot Phone.

• First we load Scatter, Connect phone to in fastboot mod and click Flash button
 • Note: if bootloader is locked first unlock it from Android/fastboot Section, This Method does
not require a DA or Auth file

Android
on the
Front page You will find basic Controls,same as Front Page, some additon options

fastboot:

• there are 2 Sections in fastboot page, first one is Fastboot control and secont one Partition
flasher.

• bootloader unlock method: all three method run different unlock code like- flashing unlock or
oem unlock, unlock-go etc & unlocking totally depent on device oem which one it accept, you
can try all, you have to confirm unlock warning on device.

• Reboot EDL- Similar to bootloader unlock you will find 3 different options here and rebooting
totally depend on vendor/oem which one it accept (make sure bhootloader is unlocked)

• there are some erasing option available to erase a specific partition for e.g config to bypass
frp, or FRP to erase FRP (for device that have a dedicated FRP parititon)

Bloatware Remover:

• it's a universal script and Run uninstall code from all vendor(oppo, xiaomi, vivo), if the app is
exist it will remove it, enable usb debuggin connect phone and click start button

Fastboot Firmware Flasher:

• flash Firmware via Fastboot mod, if the device Show a partition list on getvar all, you can use
this section, tested and working on Xiaomi Phone's.

Qualcomm
Reading Firmware:

• Locate programmer file

• Put Phone to EDL, Connect phone to computer Once COM is Detected

• Mark Reading Option, Click Strat button

Read Single partition:

• locate Firehose, mark device type Put Phone to EDL, Connect phone to computer Once COM is
Detected, mark Partition to Read and Click 'Read partition' button

Firmware Flasher:

• mark device type

• Locate Require Files

• Connect phine in EDL Mod, once COM detected click Download button

• Monitor Live Process in Console.....

Service:

• wipe a specific partition to bypass security data

Firmware Flasher 2:

• an additional method to flash the firmware

• first flash rawprogram0 once flashing done flash patch0.xml (load it under rawprogram0 Field,
load require files start

Single partition flasher:

• flash a specic image to a Specic parition without flashing Full Firmware... Rawprogram0 is not
required for this...

QCOM Experimet:

• if don't have a firehose for your device, try to boot from a similar device, more than 500+
firehose included.

XIAOMI...
Doing a Specific Job:

• select device from drop down

• mark the device type (no auto support)

• mark the Function you want

• Connect phone in EDL Mod, once COM detetced Click 'START' btton

Firmware Flasher:

• Select Model From drop down (required)

• mark device type (required)

• Load all the files under Firmware Flasher

• Firmware folder Must select images folder

• Connect phone in EDL Mod, once COM detetced Click 'Download' button

Other brand:
all other brands has Similar options as Xiaomi, follow Xiaomi

Samsung
bypass FRP:

• connect phone to Computer

• Go to Emergency Dialer and type *#0*#

• Run ROM2box.exe Locate port and Click bypass Now

• Note: if No Port available Click Restart and Then Select

Firmware Flasher:

• Flash Samsung Firmware via Download mod,

• Select require field's

• connect phone in Download mod, Mark Auto reboot or No Reboot options

This Document was created by ROMProvider.COM on Aug 2022.....