Preliminary Issue

A104521R05v06
D10X-2x690-960/4x1695-2690/4x2300-2690-7x65-2x16.5i/4x18i/21i-7xM-R
EasyRET 2L4H 20-port FDD/2.3-2.6GHz 8T8R TDD Antenna with 7 Integrated
RCUs - 2.6m

Antenna Specifications
Electrical Properties
2 x (690 - 960) 4 x (1695 - 2690)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45° +45° , -45°
2 - 12 , continuously adjustable, each band 2 - 12 , continuously adjustable, each band
Electrical downtilt (°)
separately separately
Gain (dBi) 15.5 15.8 16.0 16.2 16.6 17.2 17.3 17.8
Side lobe suppression for first side
> 15 > 15 > 15 > 15 > 16 > 15 > 15 > 16
lobe above main beam (dB)
Horizontal 3dB beam width (°) 69 67 65 60 65 64 62 59
Vertical 3dB beam width (°) 8.8 8.1 7.8 7.3 7.2 6.5 5.7 5.2
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 26
Interband isolation (dB) ≥ 26 ≥ 26
Front to back ratio , ±30° (dB) > 21 > 22 > 22 > 22 > 24 > 25 > 26 > 26
Cross polar ratio (dB) 0° > 18 > 18 > 18 > 18 > 16 > 15 > 16 > 16
Max. effective power per port (W) 400 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC Ground DC Ground

General Electrical Properties

Frequency range (MHz) 2300 - 2690
Polarization +45° , -45°
2 - 12, continuously adjustable,
Electrical downtilt (°)
each band separately
General parameters Electrical downtilt tolerance (°) ±1
Max. effective power per port (W) 50 (at 50℃ ambient temperature)
Impedance (Ω) 50
Grounding DC Ground
Coupling factor between calibration port and each antenna port (dB) -26 ±2
Max. amplitude tolerance from calibration port to input ports (dB) 0.7

Calibration and Max. phase tolerance from calibration port to input ports (°) 6
electrical parameters Ports VSWR 1.5
Co-polarization isolation between ports (dB) ≥ 20
Cross-polarization isolation between ports (dB) ≥ 23

1
 Preliminary Issue

A104521R05v06
D10X-2x690-960/4x1695-2690/4x2300-2690-7x65-2x16.5i/4x18i/21i-7xM-R
EasyRET 2L4H 20-port FDD/2.3-2.6GHz 8T8R TDD Antenna with 7 Integrated
RCUs - 2.6m

TDD LTE Electrical Properties

Frequency range (MHz) 2300 - 2690
Gain (dBi) 15.2
Horizontal 3dB beam width (°) 90

Single column Front to back ratio (dB) ≥ 25

beam Cross polar ratio (0°) (dB) ≥ 15
Vertical 3dB beam width (°) 7.7
Side lobe suppression for first side lobe above main beam (dB) ≥ 15
Gain (dBi) 16.4
Horizontal 3dB beam width (°) 65

65° Broadcast Front to back ratio (dB) ≥ 26

Radiation beam Cross polar ratio (0°) (dB) ≥ 17
parameters
Vertical 3dB beam width (°) 7.7
Side lobe suppression for first side lobe above main beam (dB) ≥ 15
0°direct beam gain (dBi) 20.6
0°direction beam horizontal 3dB beam width (°) 26
Service beam
0°direction beam front to back ratio (dB) ≥ 30
0°direction beam cross polar ratio (dB) ≥ 18
Gain (dBi) 19.4

Soft split Horizontal 3dB beam width (°) 31

multi-beam Front to back ratio (dB) ≥ 30
Cross ploar ratio at boresight (dB) ≥ 19
Notes：
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on site
requirements and auxiliary equipment conditions.

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 469 x 206
Antenna weight (kg) 46.8
Clamps weight (kg) 6.3 (2 units)
Mast diameter supported (mm) 50 - 115
Radome material GFRPP*
Radome colour Light grey
y2 y3 y4 y5
Operational temperature (℃) -40 .. +65
Frontal: 780 (at 150 km/h)
Wind load (N) Lateral: 485 (at 150 km/h)
Maximum: 1035 (at 150 km/h)
Max. operational wind speed (km/h) 200 y1 y1 y1 y1
Survival wind speed (km/h) 250 r1 r2

12 x 4.3-10 Female
Connector
1 x MQ4 Male + 1 x MQ5 Male
Connector position Bottom

*GFRPP: Glass Fiber Reinforced Polypropylene

Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com
Any previous datasheet issues become invalid. 2 Issue: 2021-04-21