CSEC Physics - Magnetism
CSEC Physics - Magnetism
Magnetic Poles
Magnetic forces are concentrated at the poles of the magnet (usually
located at the ends).
Each magnet has a N-Pole and S-Pole, making them magnetic dipoles.
It is thought that magnets only exist at dipoles, and that monopoles do
not exist.
Magnetic Fields
A magnetic field is the area in which a magnetic force acts
The further a magnet is from a magnetic material, the weaker the force
exhibited on it, hence, force decreases with distance.
The identity of a pole can be confirmed using a magnet where the poles
are known. Simply use the north or south pole to test the interaction of
the unknown pole. Unlike poles attract and same poles repel.
Field Patterns:
Around a single bar magnet:
A uniform magnetic field is one in which the field lines are parallel
Radial Fields
Radial fields are a type of uniform field. A radial field radiates away
from the a round magnets with the field lines equidistant to each other
Hans Oersted proved that when an electric current flowed along a wire,
there would be a magnetic field around the wire.
Dots and crosses with circles around them are used for currents and by
themselves for fields
This makes it easier for external magnetic fields to orient the dipoles in
the same direction, magnetising the object
Magnetic Induction
This is the process by which magnetic properties are transferred from one
body to another without physical contact. This partial, temporary
aligning of dipoles is what allows magnets to attract magnetic
materials.
The North pole of the bar magnet is stroked along the length of the iron
nail. As it reaches the end it is lifted and brought back to the nail head
where it is stroked in the same direction continuously. This produces a
North pole at the head of the nail and a South pole at the tip.
A piece of steel is placed inside a coil of wire with many turns, carrying
a large DC . The steek becomes magnetised. The domains in the steel
become aligned and remain that way since steel is magnetically hard.
This is how permanently magnets are generally made.
A magnetically soft material, like iron, will have its domains easily
aligned by the coil carrying DC, but will just as easily loose its
magnetism when the power is switched off
Demagnetisation
This may also be achieved by heating the magnet and letting it cool in
an east-west direction. This is because the thermal vibrations lead to the
domains becoming randomly oriented