Scribd
Upload
47 views4 pages

High Efficiency Rectifiers: High-Reliability Discrete Products and Engineering Services Since 1977

The document describes a series of high efficiency rectifiers (1N5807-1N5811). Each rectifier has a different maximum reverse voltage rating (1N5807: 50V, 1N5811: 150V). The rectifiers can withstand high forward surge currents up to 125A and have low forward voltage drops between 0.875V and 0.8V at 4A of current. They are available with various reliability and environmental compliance options like high reliability screening and RoHS compliance.

Uploaded by

jesus cautivo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views4 pages

High Efficiency Rectifiers: High-Reliability Discrete Products and Engineering Services Since 1977

The document describes a series of high efficiency rectifiers (1N5807-1N5811). Each rectifier has a different maximum reverse voltage rating (1N5807: 50V, 1N5811: 150V). The rectifiers can withstand high forward surge currents up to 125A and have low forward voltage drops between 0.875V and 0.8V at 4A of current. They are available with various reliability and environmental compliance options like high reliability screening and RoHS compliance.

Uploaded by

jesus cautivo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

1N5807-1N5811

High-reliability discrete products HIGH EFFICIENCY RECTIFIERS


and engineering services since 1977

FEATURES
 Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
 Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.

MAXIMUM RATINGS
Parameter Symbol Value Unit
Working peak reverse voltage
1N5807 50
1N5808 75
VRWM V
1N5809 100
1N5810 125
1N5811 150
Forward surge current (1) IFSM 125 A
Average rectified output current @ TL = 75°C at 3/8” lead length (2) IO1 6.0 A
(3)
Average rectified output current @ TA = 55°C at 3/8” lead length IO2 3.0 A
Capacitance @ VR = 10V, f = 1MHz, Vsig = 50mV(p-p) C 60 pF
Reverse recovery time (4) trr 30 ns
Solder temperature @ 10 s TSP 260 °C
Junction and storage temperature range TJ, Tstg -65 to +175 °C
Thermal resistance junction to lead (L = 0.375”) RѲJL 22 °C/W
Note 1: TA = 25°C @ IO = 3.0A and VRWM for 10 8.3ms surges at 1 minute intervals.
Note 2: IO1 is rated @ TL = 75°C at 3/8” lead length. Derate at 60mA/°C for TL above 75°C.
Note 3: IO2 is derated at 25mA/°C above TA = 55°C for PC boards where thermal resistance from mounting point to ambient is sufficiently controlled where TJ(max) 175°C is not exceeded.
Note 4: IF = 1.0A, IRM = 1.0A, IR(REC) = 0.10A. and di/dt = 100A/µs min.

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified)

Minimum Maximum forward


voltage @ 4A Maximum reverse Maximum surge Maximum reverse
breakdown
current @ VRWM current (5) recovery time (6)
voltage @ 100µA (8.3ms pulse)
Part
number
V(BR) VFM IR IFSM trr

Volts µA
Volts Amps ns
25°C 125°C 25°C 125°C

1N5807 60 0.875 0.800 5 525 125 30

1N5808 85 0.875 0.800 5 525 125 30

1N5809 110 0.875 0.800 5 525 125 30

1N5810 135 0.875 0.800 5 525 125 30

1N5811 160 0.875 0.800 5 525 125 30


Note 5: TA = 25°C @ IO = 3.0A and VRWM for ten 8.3ms surges at 1 minute intervals.
Note 6: IF = 1.0A, IRM = 1.0A, IR(REC) = 0.10A and di/dt = 100A/µs min.

Rev. 20150713
1N5807-1N5811
High-reliability discrete products HIGH EFFICIENCY RECTIFIERS
and engineering services since 1977

MECHANICAL CHARACTERISTICS
Case Digi B
Marking Alpha Numeric
Polarity Cathode Band

Rev. 20150713
1N5807-1N5811
High-reliability discrete products HIGH EFFICIENCY RECTIFIERS
and engineering services since 1977

Rev. 20150713
1N5807-1N5811
High-reliability discrete products HIGH EFFICIENCY RECTIFIERS
and engineering services since 1977

Rev. 20150713

You might also like