Scribd
Upload
1K views

Manual MK321BT en

This document summarizes the features and functions of a custom keyboard. It has an on/off switch to turn the keyboard on and off. It provides three connection modes: USB + Bluetooth + 2.4G, USB + Bluetooth, and USB + 2.4G. It has two USB Type-C ports. The document describes how to pair and switch between Bluetooth, 2.4G, and USB modes. It also summarizes the keyboard's programmable functions, including keys, mouse functions, text strings, multimedia, and macros.

Uploaded by

Roseli Povis
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

Manual MK321BT en

This document summarizes the features and functions of a custom keyboard. It has an on/off switch to turn the keyboard on and off. It provides three connection modes: USB + Bluetooth + 2.4G, USB + Bluetooth, and USB + 2.4G. It has two USB Type-C ports. The document describes how to pair and switch between Bluetooth, 2.4G, and USB modes. It also summarizes the keyboard's programmable functions, including keys, mouse functions, text strings, multimedia, and macros.

Uploaded by

Roseli Povis
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Custom Keyboard

①OFF/ON keyboard switch. OFF switch closes the keyboard,


ON switch opens the keyboard.
②Connect mode switch, the keyboard provides three modes 　
for purchase: three-mode (USB+ Bluetooth +2.4G), dual-mode
(USB+ Bluetooth), dual-mode (USB+2.4G).
③④The product provides two USB Type-C ports, which can be　
placed from multiple angles.
Before using the product, download and install the product
configuration software
Download:Windows：footswitch.pcsensor.com
MAC：elfkey.pcsensor.com，Select the latest version.
Note: After setting it successfully in Windows or Mac system,
it can be used in DOS, Windows ALL, Linux, Mac, IOS, Android
mode LED lights Pairing mode Back to the model Ｌｏｗ　ｐｏｗｅｒ　ａｌａｒｍ

Bluetooth mode red light Ｏｎ　１　ｓｅｃｏｎｄ　Ｏｆｆ　 Blink every


１　ｓｅｃｏｎｄ　ｃｙｃｌｅ flash
2.4G mode green light three seconds

USB mode Blue light -- -- --


Click the "Connect" key to switch the mode；
In Bluetooth and 2.4G mode, long press the "connect" key for 3 seconds to enter the
corresponding mode pairing state.

mode switch：Press the "Connect" key for less than


three seconds to switch between the three modes.
Bluetooth mode：In Bluetooth mode, long press the "
connect" key for three seconds to enter the pairing
state (the red light blinks slowly), find the device
named "MK321", and click the name to connect.
2.4G mode：In 2.4G mode, long press the "connect" key
for three seconds to enter the pairing state (the green
light blinks slowly), then insert the adapter, and the
device and receiver will be automatically paired.
USB mode：In USB mode, the device can be connected to
the computer through USB cable, which can be used as a
wired foot pedal, and the function can be set by
software.
Function introduction
(1) Keyboardfunction: canbeset toany key valueor key combination,
suchas set tokey valueAor CTRL+A. Action Settings - Singletrigger:
Holddowntheactionwill only output once, continuous trigger:
holddowntheactior will only continue tooutput. Singlekev: onlv onekev
canbeset after checking. multi-kev combination: multiolekevs
canbeset totrigger upto6 keys at thesametimeafter checking.
(2) Mousefunction: canbeset totheleft, middle, right mouseor X, Y
axis of themovement of thescroll wheel upanddown function.
(3) Stringprinting: canbeset upto38characters, suchas setting
"Hello!"
(4)Multimediaunction: canbeset tothelast song. thenext song,
volume, volumereductionandother multimediacontrol function(5)
gamepadfunction: canbeset as up, down, left, right four
directionkeys and6 functionkeys.
(5) ｇａｍｅｐａｄｆｕｎｃｔｉｏｎ：　ｃａｎｂｅｓｅｔ　ａｓ　ｕｐ，　ｄｏｗｎ , left, right four
directionkeys and6 functionkeys.
(6) Macrodefinitionfunction: youcancustomizethe
combinationof keyboardandmouseactions, for example, set Ctrl +
Ptodelay 100ms andthenenter torealizethefunctionof one-key printing.
FootSwitch

Type Introduction Ｆｕｃｔｉｏｎ

clean ｓａｖｅ Initiate

1.Ｋｅｙ　ｃｏｎｆｉｇｕｒａｔｉｏｎ　ａｒｅａ　Ｓｅｌｅｃｔ　ｔｈｅ　ｃｏｒｒｅｓｐｏｎｄｉｎｇ　ｋｅｙ，　ｃｌｅａｒ　ｔｈｅ　ｃｕｒｒｅｎｔ　
　ｃｏｎｆｉｇｕｒａｔｉｏｎ，　ｍａｎｕａｌｌｙ　ｅｎｔｅｒ　ｔｈｅ　ｋｅｙ　ｔｏ　ｂｅ　ｓｅｔ，　ａｎｄ　ｃｌｉｃｋ　ｓａｖｅ　ａｆｔｅｒ　ｅ　
ｄｉｔｉｎｇ．
2.Ｆｕｎｃｔｉｏｎ　ｍｅｎｕ：　ｋｅｙｂｏａｒｄ，　ｍｏｕｓｅ，　ｓｔｒｉｎｇ，　ｍｕｌｔｉｍｅｄｉａ，　ｍａｃｒｏ　ｄｅｆｉｎｉｔｉｏｎ，　
ｏｎｅ－ｃｌｉｃｋ　ｏｐｅｎ，　ｅｔｃ．，　ｅｎｔｅｒ　ｔｈｅ　ｐａｇｅ　ｔｏ　ｔｉｃｋ　ｏｒ　ｅｄｉｔ，　ｃｌｉｃｋ　ｔｈｅ　ｂｕｔｔｏｎ　ｃ　
ｏｎｆｉｇｕｒａｔｉｏｎ　ａｒｅａ，　ｉｆ　ｔｈｅ　ｃｏｒｒｅｓｐｏｎｄｉｎｇ　ｃｏｎｔｅｎｔ　ｉｓ　ｄｉｓｐｌａｙｅｄ，　ｔｈｅ　ｆｕｎｃｔｉ　
ｏｎ　ｓｅｔｔｉｎｇ　ｉｓ　ｓｕｃｃｅｓｓｆｕｌ，　ｃｌｉｃｋ　ｓａｖｅ　ａｆｔｅｒ　ｅｄｉｔｉｎｇ．
3. If youencounter any problemintheprocess of using,
youcancontact us through the purchase channel.

You might also like