KX-NS PBX

Remote IP Extension
June 2, 2014

Panasonic System Networks

PBX SE team

Specifications are subject to change without notice.

 1. Overview
Built-in MRG feature supports remote IP extension without VPN.
MRG = Media Relay Gateway KX-NS1000 : Version 3 or later
Other KX-NS PBX : Any Version
Following phones support this feature.
- KX-NT543/NT546/NT560 (Version up of phone software is required.)
- KX-NT511 and KX-NT550 series
- KX-UT series
- 3rd party SIP phone with Blank UDP transmit capability. (Video phone is also supported.)

Other phones do not support this feature.

KX-UDT / KX-NT300 series / KX-NT300 based software phone

Local Office Remote Office

WAN WAN or Mobile Internet
11.22.33.44 Internet 22.33.44.55
192.168.0.101

LAN 192.168.0.1 LAN

Ext 103
Ext 101 Ext 102
192.168.0.201 192.168.1.201

IP address in this document is example. 2

 2. Concept of Programming
Only 3 PBX programming are required for remote connection.
(1) PBX has to know global IP address of router. 11.22.33.44
(2) Do not forget setting of default gateway. 192.168.0.1
(3) PBX has to know location of each IP extension. Local or Remote
“5060” is too famous as port for SIP.
Port Fwd is required to router. “5060” has high risk for attacking by hacker.
(Not only 15060) KX-UT in remote location uses port “15060” to
access PBX through router.
15060 to
This document uses “15060” for other SIP
192.168.0.101:5060
phone also.

Local Office WAN Remote Office

11.22.33.44 WAN or Mobile Internet
Port : 15060 Internet 22.33.44.55
192.168.0.101
Port : 5060
LAN 192.168.0.1 LAN

Ext 103
Ext 101 Ext 102
192.168.0.201 192.168.1.201

3
 Chapter 1
PBX Programming

4
 11. Assign Global IP Address of Router.

Local Office WAN Default is OK.

11.22.33.44
Port : 15060
192.168.0.101
Port : 5060
LAN 192.168.0.1

Ext 101
192.168.0.201

5
 12. Assign Default Gateway.

Local Office WAN

11.22.33.44
Port : 15060 Default gateway is required not only for
192.168.0.101 remote IP extension but also for many
Port : 5060 other purpose.
LAN 192.168.0.1

Ext 101
192.168.0.201

6
 13. Assign Location of SIP Extension.
< 3rd party SIP Phone >

Local Office Remote Office

WAN WAN or Mobile Internet
11.22.33.44 Internet 22.33.44.55
192.168.0.101

LAN 192.168.0.1 LAN

Ext 103
Ext 101 Ext 102
192.168.0.201 192.168.1.201

7
 14. Assign Location of KX-NT500.
< KX-NT500 >

8
 15. Assign Location of KX-UT.
< KX-UT >

SBC : Session Boarder Controller

(3rd party equipment is required.)

Secure communication is available using HTTPs for KX-UT.

- TR069(CWMP) is available with https.
- Maximum 20 KX-UT phone can use this feature.
Each one KX-NS1000 in one-look network supports 20 KX-UT
with this feature.
9
 Chapter 2
SIP Phone Setting

SIP Software Phone for Smart-phone by Media5 is used in this

chapter as example.

10
21. Configure SIP Account.

11
 22. Assign Ext Number & PIN to log-in.

See next page.

Title = Reference
Username = Extension Number
Password = SIP Password of PBX
12
23. Assign Destination to log-in.

Local Office WAN

11.22.33.44
Port : 15060
192.168.0.101
Port : 5060
LAN 192.168.0.1

Ext 101
192.168.0.201

13
24. Enable “rport”.

14
 Chapter 3
KX-NT/UT Phone Setting

15
 31. KX-NT500 : Assign Router as Destination.
Assign global IP address of router (11.22.33.44 for example) as
destination instead of PBX local address (192.168.0.101 for example),
when KX-NT phone is installed in remote office.

Local Office Remote Office

WAN WAN or Mobile Internet
11.22.33.44 Internet 22.33.44.55
192.168.0.101

LAN 192.168.0.1 LAN

Ext 103
Ext 101 Ext 102
192.168.0.201 192.168.1.201

16
 32. KX-UT : Connect in Local Office.
1. Connect KX-UT phone in local office. (Not remote office)
2. Change PBX setting for this extension from “Local” to “Remote”.
3. Restart KX-UT by power off and on again. Error may display but OK.
4. Dispatch KX-UT to remote office.

Destination from remote office (11.22.33.44:15060 for example) is automatically informed to

KX-UT phone from PBX at step 3.

Local Office 11.22.33.44 WAN Remote Office

Port : 15060 11.22.33.44 WAN
Port : 15060 Internet 22.33.44.55
192.168.0.101
Port : 5060
192.168.0.1 LAN

Step 4 Ext 103

Ext 101 Ext 102 Ext 102
Dispatch
192.168.0.201 192.168.1.201 192.168.1.201

Operation is not required in remote office to connect KX-UT phone to PBX.

All you have to do is to connect KX-UT phone to LAN in remote office.
17
 Chapter 4
Router Programming

Port forwarding is required for router.

18
 41. Port Fwd to DSP
< for 3rd party SIP Phone / KX-NT500 / KX-UT >
Protocol Range of port number (WAN) Destination Description

RTP 16000-16511(UDP) 192.168.0.102 to DSP#1-1

16512-17023(UDP) 192.168.0.103 to DSP#1-2
17024-17535(UDP) 192.168.0.104 to DSP#2-1
17536-18047(UDP) 192.168.0.105 to DSP#2-2

WAN LAN

< Reference of PBX setting >

Default is OK.
This parameter is common for IP trunk and IP extension.

19
 42. Port Fwd to PBX LAN : SIP
< for 3rd party SIP Phone >
Protocol Port number Destination

SIP 15060(UDP) 192.168.0.101:5060(UDP)

Port number conversion is required from 15060 to 5060.

< Reference of PBX setting >

Default is OK.

20
 43. Port Fwd to PBX LAN : KX-NT500
< for KX-NT500 >
Protocol Port number Destination

MGCP 2727(UDP) 192.168.0.101

PTAP 9300(UDP) 192.168.0.101

< Reference of PBX setting >

Default is OK.

21
 44. Port Fwd to PBX LAN : KX-UT
< for KX-UT >
Protocol Port number Destination
SIP 15060(UDP) 192.168.0.101:5060(UDP)
CWMP (HTTP) 7547(TCP) 192.168.0.101
CWMP (HTTPS) 37547(TCP) 192.168.0.101
SIP-MLT Data Download (HTTP) 7580(TCP) 192.168.0.101
SIP-MLT Data Download (HTTPS) 37580(TCP) 192.168.0.101
NTP 123(UDP) 192.168.0.101

< Reference of PBX setting > Default is OK.

22
 45. Port Fwd to PBX LAN : KX-UT
< Reference of PBX setting >
Default is OK. (These should be blank.)

This is applied to above,

if above is blank.

23
 46. Condition for External Router
Condition for external router is only as follows.

- Many port fwd setting is required as previous pages.

But some router does not have enough number of port fwd setting.
(Range setting is not possible.)

- New router has "SIP ALG" feature.

But this feature should be disabled by programming.

- Some router by Cisco (Not all router by Cisco) does not have
compatibility for KX-NT500 remote connection.
When MRG feature does not work for KX-NT500, please contact us.

24
 Chapter 5
KX-NS1000 Built-in Router

MRG feature can work with KX-NS1000 built-in router.

25
 51. Concept of Programming
Programming (1) and (3) are required for remote connection.
(1) PBX has to know global IP address of router. 11.22.33.44
(2) Default gateway programming 192.168.0.101 (No need)
(3) PBX has to know location of each IP extension. Local or Remote

Fixed global IP address for WAN is required as next page. 11.22.33.44

Other settings such as Port Fwd are NOT required.
Local Office Activation key KX-NSN101 is
WAN required to use WAN.
11.22.33.44
Port : 15060
Remote Office
WAN or Mobile Internet
Internet 22.33.44.55
192.168.0.101
Port : 5060
LAN LAN

Ext 103
Ext 101 Ext 102
192.168.0.201 192.168.1.201

26
52. IP Address for WAN

27
Thank you !

28
 Revision

Date No. Change

April 17 All First release
May 5 46 (Page 24) Condition for Cisco router was added.
June 2 46 (Page 24) Condition for Cisco router was revised.

29