Markings such as "ASME," "ASME Standard,” or any other marking including “ASME,” ASME logos, or the Certification Mark shall not be used on any item that is not constructed in accordance with all of the applicable requirements of the Code or Standard. Use of ASME’s name, logos, or Certification Mark requires formal ASME certification; if no certification program is, available, such ASME markings may not be used. (For Certification and Accreditation Programs, see https://www.asme.org/shop/certification-accreditation,) Items produced by parties not formally certified by ASME may not be described, either explicitly or implicitly, as ASME certified or approved in any code forms or other document.PDO ee 2017 ASME Boiler & Pressure Vessel Code Peas tL) PTV Beso MATERIALS Part C Specifications for Welding Rods, Electrodes, and Filler Metals ASME Boiler and Pressure Vessel Committee on Materials SC TCT aCe Be TIE UT OOO Ra ACCELDate of Issuance uly 3, 2017 ‘This international code or standard was developed under procedures accredited as meeting the criteria for American National Standards and it is an American National Standard, The Standards Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate. The proposed code or standard was made available for public review and com- ment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at large. ASME does not “approve,’ “rate,” or “endorse” any item, construction, proprietary device, or activity ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent, nor assume any such liability. Users of a code or standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Participation by federal agency representative(s) or person(s) affliated with industry is notto be interpreted as government or industry endorsement of this code or standard, ‘ASME accepts responsibility for only those interpretations of this document issued in accordance with the es- tablished ASME procedures and policies, which precludes the issuance of interpretations by individuals. ‘The endnotes and preamble in this document (if any) are part of this American National Standard. OK) enn ‘corsfication Marie The above ASME symbol is registered in the US, Patent Office. "ASME" isthe trademark of The American Society of Mechanical Engineers ‘The Specifications published and copyrighted by the American Welding Society ‘are reproduced with te Society's persion, No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior writen permission of the publiser. Library of Congress Catalog Card Number 56-3934 Printed in the United States of America Adopted by the Council of The American Society of Mechanical Engineers, 914; latest edition 2017 The American Society of Mechanical Engineers “Two Park venue, New York, NY 10026-5990 Copyright © 2017 by TE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All rights reservedTABLE OF CONTENTS List of Sections Foreword Statement of Policy on the Use of the Certification Mark and Code Authorization in Advertising Statement of Policy on the Use of ASME Marking to Identify Manufactured Items Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees Personnel AWS Personnel Preface Guideline on the Approval of New Welding and Brazing Material Classifications Under the ASME Boiler and Pressure Vessel Code Summary of Changes List of Changes in Record Number Order : Cross-Referencing and Stylistic Changes in the Boiler and Pressure Vessel Code SFA-5.01M/SFA-5.01 Welding Consumables — Procurement of Filler Materials and Fluxes SFA-5.02/SFA-5.02M Specification for Filler Metal Standard Sizes, Packaging, and Physical Attributes SFA.5.1/SPA-S.1M Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding SFA-5.2/SFA-S.2M Specification for Carbon and Low-Alloy Steel Rods for Oxyfuel Gas Welding SFA.5.3/SFA-5:3M Specification for Aluminum and Aluminum-Alloy Electrodes for Shielded Metal Arc Welding SFA-5.4/SFA-S4M. Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding SFA.5.5/SFA-5.5M Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding SFA-5.6/SFA-S.6M. Specification for Copper and Copper-Alloy Electrodes for Shielded Metal Arc Welding SA-5.7/SFA-5.7M Specification for Copper and Copper-Allay Bare Welding Rods and Electrodes SFA-5.8/SFA-S.8M. Specification for Filler Metals for Brazing and Braze Welding SFA-5.9/SFA-59M Specification for Bare Stainless Steel Welding Electrodes and Rods SFA-5.10/SFA-S.10M Specification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods SPA-S.11/SFA-S.11M Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding SFA-S.A2/SFA-SA2M Specification for Tungsten and Oxide Dispersed Tungsten Electrodes for Arc ‘Welding and Cutting SFA-S.13 Specification for Surfacing Electrodes for Shielded Metal Arc Welding. SFA-S.14/SFA-SL4M Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods SFA-S.1S Specification for Welding Electrodes and Rods for Cast Iron SFA-5.16/SFA-S.16M Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods SFA-S.17/SFA-S.7M Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding SFA-5.18/SFA-S.18M Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding SFA-5.20/SFA-5.20M Specification for Carbon Steel Electrodes for Flux Cored Arc Welding SFA-S.21 Specification for Bare Electrodes and Rods for Surfacing SFA-5.22/SFA-5.22M Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods SFA-5.23/SFA-5.23M Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding SFA-5.24/SFA-5.24M Specification for Zirconium and Zirconium-Alloy Welding Electrodes and Rods SFA-5.25/SFA-5.25M Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding SPA-5.26/SFA-5.26M Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding 1 a 33 7 87 101 139 193 213, 227 269 297 327 363 375, 397 423 4a 451 479 505, 543 567 617 657 667 691SFA-5.28/SFA-5.28M SFA-5.29/SPA-5.29M SFA-5.30/SFA-5.30M SFAS31 SFA-5.32/SPA-5.32M SFA-S34/SFA-5.34M, SFA:5.36/SFA-5.36M Mandatory Appendix 1 Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding Specification for Low-Alloy Steel Electrodes for Flux Cored Are Welding Specification for Consumable Inserts Specification for Fluxes for Brazing and Braze Welding Specification for Welding Shielding Gases Specification for Nickel-Alloy Electrodes for Flux Cored Arc Welding. Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored ‘Arc Welding and Metal Cored Electrodes for Gas Metal Arc Welding Standard Units for Use in Equations m7 751 791 ail 829 343 869 92sLIST OF SECTIONS an SECTIONS [Rules for Construction of Power Boilers 1 Materials + Part A — Ferrous Material Specifications + Part B — Nonferrous Material Specifications + Part C — Specifications for Welding Reds, Electrodes, and Filler Metals + Part D — Properties (Customary) + Part D — Properties (Metric) HI Rules for Construction of Nuclear Facility Components Subsection NCA — General Requirements for Division 1 and Division 2 Appendices Division 1” ~ Subsection NB — Class 1 Components = Subsection NC — Class 2 Components = Subsection ND — Class 3 Components ~ Subsection NE — Class MC Components = Subsection NF — Supports ~ Subsection NG — Core Support Structures Division 2 — Code for Concrete Containments Division 3 — Containment Systems for Transportation and Storage of Spent Nuclear Fuel and High-Level Radioactive Material Division 5 — High Temperature Reactors IV Rules for Construction of Heating Boilers V Nondestructive Examination VI__ Recommended Rules for the Care and Operation of Heating Boilers Vil Recommended Guidelines for the Care of Power Boilers VIlI_ Rules for Construction of Pressure Vessels + Division 1 + Division 2 — Alternative Rules + Division 3 — Alternative Rules for Construction of High Pressure Vessels IX Welding, Brazing, and Fusing Qualifications X Fiber-Reinforced Plastic Pressure Vessels XI Rules for Inservice Inspection of Nuclear Power Plant Components XII Rules for Construction and Continued Service of Transport Tanks The 2015 tiditon of Seton It was the last edition in which Section Il Division 1, Subsection NH, Class 1 Components in Elevated Tem perature Servic, was published. The requirement located within Subsection NH vere moved te Section Il, Division 5, Subsection HE, Subpart Bfor the elevated temperature construction of Class A components