Temposonics ®

Magnetostrictive, Absolute, Non-contact

Linear-Position Sensors

R-Series Models RP and RH Document Part Number

Profibus-DP Output 550990 Revision C

Data Sheet

Model RP Profile-style position sensor Model RH Rod-style position sensor

Time-based Magnetostrictive position sensing principle

FEATURES Movable position magnet

„„ Linear, Absolute Measurement

„„ LEDs For Sensor Diagnostics Magnetic field encompasses
„„ Superior Accuracy, Resolution down to 1 µm entire waveguide - generated
by the interrogation pulse
„„ Non-Contact Sensing Technology
„„ Linearity Deviation Less Than 0.01% Interrogation Magnetic field from
Return wire position magnet
„„ Repeatability Within 0.001%
„„ Direct Profibus-DP Output (Position +Velocity) Waveguide Interaction of magnetic
fields causes waveguide to
„„ Standard and Multi-magnet position measurements Strain-Pulse detector generate a strain pulse
(up to 20 positions per sensor)
Bias magnet
BENEFITS
„„ Rugged Industrial Sensor
„„ Fullfills All Requirements of Profibus-DP Benefits of Magnetostriction
(EN 50170) Protocol Temposonics linear-position sensors use the time-based magneto-
„„ Profibus-DP Provides Powerful Functions for strictive position sensing principle developed by Temposonics.
Diagnostics and Configuration Within the sensing element, a sonic-strain pulse is induced in a
„„ Linearity Correction Options specially designed magnetostrictive waveguide by the momentary
interaction of two magnetic fields. One field comes from a moveable
APPLICATIONS permanent magnet that passes along the outside of the sensor. The
„„ Continuous Operation In Harsh Industrial Conditions other field comes from an “interrogation” current pulse applied
„„ High Pressure Conditions along the waveguide. The resulting strain pulse travels at sonic
„„ For Accurate, Multi-Magnet Position Measurement speed along the waveguide and is detected at the head of the sensing
(up to 20 positions per sensor) element.
The position of the magnet is determined with high precision and
TYPICAL INDUSTRIES
speed by accurately measuring the elapsed time between the applica-
„„ Factory Automation tion of the interrogation pulse and the arrival of the resulting strain
„„ Fluid Power pulse with a high-speed counter. The elapsed time measurement is
„„ Plastic Injection and Blow Molding directly proportional to the position of the permanent magnet and is
„„ Material Handling and Packaging an absolute value. Therefore, the sensor's output signal corresponds
to absolute position, instead of incremental, and never requires
recalibration or re-homing after a power loss. Absolute, non-contact
sensing eliminates wear, and guarantees the best durability and output
repeatability.
All specifications are subject to change. Contact Temposonics for specifications
and engineering drawings that are critical to your application. Drawings
contained in this document are for reference only. Go to
www.temposonics.com for the latest support documentation and related media.
R-Series Models RP/RH Sensors with Profibus-DP Output
Product Overview and Specifications
Product overview
R-Series model RH and RP sensors are extremely robust and are Temposonics R-Series models RP and RH linear-position sensors
ideal for continuous operation under harsh industrial conditions. fulfill all requirements of Profibus-DP (EN 50170) protocol. They also
Temposonics offers two standard sensor housings, rod and profile provide absolute position data to Profibus control units by using a
extrusion. The rod housing is capable of withstanding high serial, bit synchronous, RS-485 format at a baud rate up to 12 Mbps
pressures such as those found in hydraulic cylinders. The profile maximum.
extrusion housing provides convenient mounting options and
captive sliding magnets which utilize slide bearings of special In addition to data transmission, Profibus-DP provides powerful func-
material that reduce friction, and help mitigate dirt build up. The tionality for diagnostics and configuration, which is loaded into the
sensor head contains the active signal conditioning and a complete bus using the GSD electronic device data sheet file. The download-
integrated electronics interface. Double shielding is used to ensure able .gsd file for Temposonics Profibus model sensors is available at
EMI protection for unsurpassed reliability and operating safety. www.temposonics.com.

Product specifications

Parameters Specifications Parameters Specifications

OUTPUT ENVIRONMENTAL
Measured output Operating
variables: Position, up to 20 magnet positions simultane- conditions: Operating temperature: 
ously -40 °C (-40 °F) to 75 °C (167 °F)
Position + Velocity, up to 5 magnets simultane- Relative humidity:
ously 90% no condensation
Temperature coefficient:  < 15 ppm/ °C
Resolution: 1 µm, other values are selectable when using
the .gsd file EMC test: Electromagnetic emission:  
IEC/EN 50081-1
Update times: 0.5 ms at 500 mm, 1 ms at 2000 mm,
Electromagnetic susceptibility: 
2 ms at 4500 mm, 3.1 ms at 7600 mm stroke
IEC/EN 50082-2, IEC/EN 61000-4-2/3/4/6, level
length. For each additional magnet add 0.05
3/4 criterium A, CE qualified
ms,. Add 0.03 ms for approximate values for
velocity measurements. Shock rating: 100 g (single hit)/IEC standard 68-2-27
(survivability)
Linearity
deviation: < ± 0.01% full stroke (minimum ± 50 µm) Vibration rating: 15 g / 10 to 2000 Hz / IEC standard 68-2-6
(Linearity Correction Option (LCO) available) WIRING
Repeatability: < ± 0.001% full stroke (minimum ± 2.5 µm) Connection type: D63 option:  Two 6-pin (M16) connectors one
Hysteresis: male and one female
< 4 µm
D53 option:  Two 5-pin (M12) connectors one
Outputs: Interface:  male and one female. plus one 4-pin connector
Profibus-DP system ISO 74498 (M8) male
Data format: 
Profibus-DP (EN 50 170) PROFILE STYLE SENSOR (MODEL RP)
Data Electronic head: Aluminum housing with diagnostic LED display
transmission (LEDs located beside connectors)
rates: 12 MBd  1.5 MBd  500 kBd  187.5 kBd  ≤93.75 kBd Sealing: IP 65**
Cable length, m: <100  <200  <400  <1000  <1200 Sensor
extrusion: Aluminum (Temposonics profile style)
Stroke length: Range (Profile style): 
25 mm to 5080 mm (1 in. to 200 in.) Mounting: Any orientation. Adjustable mounting feet or
Range (Rod style):  T-Slot nut (M5 threads) in bottom groove
25 mm to 7620 mm (1 in. to 300 in.) Magnet types: Captive-sliding magnet or open-ring magnet
ELECTRONICS ROD STYLE SENSOR (MODEL RH)
Operating Electronic head: Aluminum housing with diagnostic LED display
voltage: +24 Vdc nominal:  -15% or +20%* (LEDs located beside connectors)
Polarity protection:  up to -30 Vdc Sealing: IP 67**
Over voltage protection:  up to 36 Vdc Sensor rod: 304L stainless steel
Current drain:  90 mA typical Operating
Dielectric withstand voltage:  500 Vdc pressure: 350 bar static, 690 bar peak
(DC ground to machine ground) (5000 psi static, 10,000 psi peak)
Mounting: Any orientation. Threaded flange M18x1.5 or
3/4-16 UNF-3A

* UL Recognition requires an approved power supply with energy limitation UL 61010-

Typical
1), or Class 2 rating according to the National Electrical Code (USA) / Canadian
mounting torque: 45 N-m (33 ft. - lbs.)
Electrical Code. Magnet types: Ring magnet, open-ring magnet, or magnet
** The IP rating is not part of the UL Recognition. float
R-Series Models RP and RH Temposonics® Linear-Position Sensors - Profibus-DP Output
Product Data Sheet, Document Part No.: 550990 Revision C (EN) 05/2014 2
 R-Series Models RP/RH Sensors with Profibus-DP Output
Enhanced Monitoring and Diagnostics, Output Parameters
Enhanced monitoring and diagnostics
SENSOR STATUS AND DIAGNOSTIC DISPLAY Green Red Operation status/mode
Integrated diagnostic LEDs (green/red), located beside sensor con- ON OFF Normal function (operation mode)
nectors (see ‘Figure 1’), provide basic visual monitoring for normal Magnet not detected or wrong
sensor operation and troubleshooting. diagnostic display LEDs ON ON
quantity of magnets
indicate four modes described in ‘Table 1’.
Flashing OFF Waiting for master parameters
Flashing ON Programming mode

Table 1.  Diagnostic display indicator modes

Figure 1.  R-Series sensor Integrated diagnostic LEDs

Profibus-DP output parameters
R-Series sensors with Profibus-DP output are compliant with Profibus When using multiple magnets, the minimum allowed distance
DP slave class 2 and have the following features: between magnets is 75 mm (3. in.) to maintain proper sensor output
(see ‘Figure 2’).
Selectable outputs:
• Absolute position measurement Single-magnet sensor
• Velocity measurement M1 M1A
Active stroke range
• Sensor Status
Temposonics ®

R-Series R
• Error detection (e.g. magnet status)
Position / Velocity
®

Selectable parameters:
• Offset / preset for each magnet 75 mm
Multi-magnet sensor (3 in.) min.
• Measuring direction; forward and reverse acting M0 M1 M2 M3 M4
• Intel® and Motorola® data format transfers Temposonics ®

R-Series R
OPERATION MODES ®

R-Series sensors with Profibus-DP protocol provide the following

single or multi-magnet measurements:

Standard measurement (P102 output code): Position / Velocity

• Position (using one magnet)
Multi-magnet measurement (P101 output code):
• Position (using up to 20 magnets simultaneously)
Figure 2.  Single and multi-magnet output diagram
Multi-magnet measurement (P103 output code):
• Position + velocity (using up to 5 magnets simultaneously)

Profibus-DP communication and functionality

DATA EXCHANGE LINEARITY CORRECTION OPTION (LCO)

For multi-magnet measurement, 1 status byte and 3 bytes of posi­tion The Linearity Correction Option (LCO) provides improved sensor
data for each position are transmitted. The status byte contains an output accuracy. For most stroke lengths linearity accuracy is im-
error bit and the position number for the following measurement proved up to a factor of 5, resulting in deviations from actual position
value. Dependent on sensor parameters, sensor data can be trans­ of less than ± 20 microns (0.0008 in.). For stroke lengths over 5000
ferred in different data formats, (e.g. Intel® or Motorola®) mm (197 in.) the linearity accuracy is improved up to a factor of 10.
Selecting the sensor style and magnet is important (both must be
matched together). Contact the factory for assistance when design-
ing for the LCO in your application.

R-Series Models RP and RH Temposonics® Linear-Position Sensors - Profibus-DP Output

3 Product Data Sheet, Document Part No.: 550990 Revision C (EN) 05/2014
Models RP and RH Programming Accessories
Model RP Profile-Style Sensor Dimension References
Profibus-DP handheld address programmer
The Profibus-DP Handheld Address Programmer (see ‘Figure 3’) is offered as an acces-
sory used to setup the Slave Address via the Profibus-DP interface. Addressing is usu-
ally performed by the Profibus-DP SetSlaveAddress command. If the master system or
controller does not support this service, connecting the Profibus-DP Handheld Address
Programmer to the sensor will bypass the service and allow direct setup.

When ordering the Profibus-DP Node and Field Address Programmer accessory, for
D53 and D63 style connections, order part no.: 280640. The Profibus-DP Node and
Address Programmer Installation instructions (document part no.: 551193) is available
in PDF format at www.temposonics.com.
Figure 3.  R-Series Profibus-DP Handheld Address
Programmer, part no.: 280640
Programming accessory Function Part number
Profibus handheld address programmer For sensors with the D63 connection type 280640
Profibus handheld address programmer For sensors with the D53 connection type 280640
Profibus master simulator Check sensor operation using Bihl + Wiedemann, Model 1131 401727
Master simulator cable For sensors with the D63 connection type 401726
Master simulator cable For sensors with the D53 connection type 252383
Junction box with noise filter for connecting 24 Vdc input power on to the bus when using
Profibus noise filter box 252916
the hybrid Profibus cable, (D63 connection type).

Model RP profile-style sensor dimension references

MODEL RP, PROFILE-STYLE SENSOR WITH STYLE S CAPTIVE-SLIDING MAGNET 
Drawing is for reference only, contact applications engineering for tolerance specific information.
Beginning of stroke 'Null' position End of stroke 'Span' position
49 mm
12 mm Stroke length
(1.92 in.)
(0.47 in.)
19 mm
Null zone
(0.75 in.) Captive-sliding magnet
Style 'S'
45 mm Electronics
9 mm 28 mm
(1.77 in.) Housing
(0.36 in.) (1.10 in.)
100 mm
2 mm (3.9 in.) Mounting foot, moveable
(0.07 in.) 14.5 mm (part no.: 400802) 82 mm (3.2 in.)
50 mm (0.57 in.) Dead zone
(1.97 in.) 5.5 mm (0.21 in.) dia.
for M5 or #10 screw (2 ea.)
68 mm (2.68 in.)
D53 Connector option

Figure 4.  R-Series Model RP Profile-style sensor dimension reference (Shown with the D53 connector option)
MODEL RP, PROFILE-STYLE SENSOR WITH STYLE M OPEN-RING MAGNET 
Drawing is for reference only, contact applications engineering for tolerance specific information.
Beginning of stroke 'Null' position End of stroke 'Span' position
49 mm 28 mm Stroke length
(1.92 in.) (1.10 in.)
14 mm Null zone Mounting support
(0.55 in.) (non-ferrous material)
Open-ring magnet Style 'M'
45 mm Electronics
9 mm 28 mm
(1.77 in.) Housing
(0.36 in.) (1.10 in.)

95 mm Mounting foot, moveable

2 mm
(3.7 in.) 14.5 mm (part no.: 400802) 66 mm (2.6 in.)
50 mm (0.07 in.)
(0.57 in.) Dead zone
(1.97 in.) 5.5 mm (0.21 in.) dia.
for M5 or #10 screw (2 ea.)
68 mm (2.68 in.)
D63 Connector option
Figure 5.  R-Series Model RP Profile-style sensor dimension reference (Shown with the D63 connector option)

R-Series Models RP and RH Temposonics® Linear-Position Sensors - Profibus-DP Output

Product Data Sheet, Document Part No.: 550990 Revision C (EN) 05/2014 4
 Model RP Profile-Style Sensor Dimensions
Standard Magnet Selections
MODEL RP, PROFILE-STYLE SENSOR WITH STYLE V CAPTIVE-SLIDING MAGNET  Drawing is for reference only, contact applications
engineering for tolerance specific information.
Beginning of stroke 'Null' position End of stroke 'Span' position
49 mm
(1.92 in.) 12 mm (0.47 in.) Stroke length
30 mm Null zone Captive-sliding magnet
(1.2 in.) Style 'V'

45 mm Electronics
9 mm
(1.77 in.) Housing
(0.36 in.)

2 mm Mounting foot, moveable

111 mm (4.4 in.) (part no.: 400802)
50 mm (0.07 in.) 82 mm (3.2 in.)
(1.97 in.) 5.5 mm (0.21 in.) dia. Dead zone
for M5 or #10 screw (2 ea.)
68 mm (2.68 in.)
A05 Integral cable option

Figure 6.  R-Series Model RP Profile-style sensor dimension reference (Shown with the A05 integral cable option)

Standard magnet selections (Model RP)

SELECTION OF POSITION MAGNETS (ONE MAGNET INCLUDED WITH MODEL RP SENSOR)
A choice of two magnet mounting configurations are available with the profile-style sensor; A ‘captive-sliding’ magnet, Styles S
or V or an ‘open-ring’ magnet, Style M. Captive-sliding magnets utilize slide bearings of special material that reduce friction, and
if required, help mitigate dirt build up. The slide bearings are designed to operate dry, requiring no external lubrication or maintenance.

The Style M ‘open-ring’ magnet mounts on the moving machine part and travels just above the sensor’s profile extrusion. The open-ring
magnet requires a minimum distance away from ferrous metals to allow proper sensor output. It must be mounted using non-ferrous screws
and a non-ferrous support bracket, or utilize a non-ferrous spacer of at least 5 mm (0.2 in.) thickness.

POSITION MAGNET SELECTIONS  (Drawing dimensions are for reference only)

Magnet dimensions and mounted magnet dimensions Description Part number
14 mm 43 mm
(0.55 in.) (1.69 in.) 20 mm
(0.79 in.)
Rotation: 52 mm
Vertical: 18° (2.05 in.) Captive-sliding magnet, Style S
Horizontal: 360° 25 mm
For Model RP profile-style sensor
252182
45 mm
(1 in.)
Ball-jointed arm (1.77 in.)
(M5 thread) 40 mm
(1.58 in.)

14 mm 57 mm
(0.55 in.) (2.24 in.)
Rotation:
25 mm Captive-sliding magnet,
Vertical: 18°
(1 in.) 36 mm Style V 252184
Ball-jointed arm For Model RP profile-style sensor
(1.41 in.)
(M5 thread) 9 mm 40 mm
(0.35 in.) (1.58 in.)

Open-ring magnet,
2 Holes Non-ferrous mounting support Style M
Each 4.3 mm and screws 21 mm I.D.:  13.5 mm (0.53 in.)
60° (0.17 in.) dia. on (0.81 in.) O.D.:  33 mm (1.3 in.)
24 mm (0.94 in.) dia. Thickness:  8 mm (0.31 in.)
Max gap
3 mm ± 1 mm Operating temperature: 
25 mm
- 40 °C to 100 °C
251416-2
14 mm (0.97 in.) 29 mm (0.12 in. ± 0.04 in.)
(0.55 in.) (1.14 in.)
21 mm This magnet may influence the
(0.81 in.) sensor performance specifications
Open-ring magnet Style ‘M’ for some applications.

R-Series Models RP and RH Temposonics® Linear-Position Sensors - Profibus-DP Output

5 Product Data Sheet, Document Part No.: 550990 Revision C (EN) 05/2014
Model RP Profile-Style Sensor
Mounting
Model RP Sensor mounting
MODEL RP PROFILE-STYLE SENSOR MOUNTING Flexible installation in any position!
Temposonics Model RP profile-style sensors offer two basic mounting methods; side grooves for use with mounting feet or a bottom groove
that accepts special T-Slot nuts. Both the mounting feet and T-Slot nuts can be positioned along the sensor extrusion to best secure the sensor
for each particular application.

Notes:

1. Model RP sensors include two mounting feet (part no. 400802) for sensors stroke lengths up to 1250 mm (50 in.)
2. One additional mounting foot is included for stroke lengths over 1250 mm (50 in.) and for each additional 500 mm (20 in.), thereafter.
3. Temposonics recommends using 10-32 cap screws (customer supplied) at a maximum torque of 44 in. lbs. when fastening mounting feet.

Profile-Style sensor mounting and installation reference Mounting method Part number

4 Holes
5.3 mm 28 mm 9 mm
(0.21 in.) dia. (1.1 in.) (0.36 in.)
Mounting feet, standard (304 SS)
2 mm 50 mm 9 mm Profile-style sensor mounting for sen- 400802
(1.97 in.) (0.36 in.) sor model RP
(0.08 in.)
68 mm
(2.68 in.)

(Width = 14.5 mm (0.57 in.)

See Mounting
10 - 32 Cap screws Mounting feet and screws Feet
Recommended Profile-style sensor foot installation part number:
(Customer supplied) 400802

Mounting foot and screws

T-Slot nut
Nut for mounting model RP sensor
401602
M5 thread
(Optional, ordered separately)
5 mm (0.20 in.) M5 Threaded
T-Slot nut, M5 thread stud and nut
Detail

R-Series Models RP and RH Temposonics® Linear-Position Sensors - Profibus-DP Output

Product Data Sheet, Document Part No.: 550990 Revision C (EN) 05/2014 6
 Model RH Rod-Style Sensor
Dimension References
Model RH rod-style sensor dimension reference
The Temposonics R-Series rod-style sensor (Model RH) offers modular con- Stroke-dependent Dead Zones:
struction, flexible mounting configurations, and easy installation. The Model RH
sensor is designed for mounting in applications where high pressure conditions Stroke length: Dead zone:
exist (5000 psi continuous, 10,000 psi spike), such as inside hydraulic cylinders. 25 mm (1 in.) - 5000 mm (197 in.) 63.5 mm (2.5 in.)
The Model RH sensor (see Figures 7, 8 and 9) may also be mounted externally 5005 mm (197 in.) - 7620 mm (300 in.) 66 mm (2.6 in.)
in many applications.

MODEL RH, ROD-STYLE SENSOR DIMENSION REFERENCE 

Drawing is for reference only, contact applications engineering for tolerance specific information.
Beginning of stroke 'Null' End of stroke 'Span'
51 mm (2 in.) position position
49 mm
(1.92 in.) Null zone Stroke length Dead Zone
14 mm 63.5 mm (2.5 in)
(0.55 in.) 25 mm (0.98 in.) 66 mm (2.6 in.)‡
Position magnet

45 mm Electronics
(1.77 in.) Housing
O-Ring ‡ For stroke lengths > 5000 mm (197 in.)
10 mm Flat-faced hex Sensor rod
D63 Connector option 99 mm (0.39 in.) flange Type 'S' 10 mm (0.39 in.) dia.
(3.9 in.) (see 'Table 2)

Figure 7.  Model RH Rod-style sensor dimension reference (shown with D63 connector option)
MODEL RH, ROD-STYLE SENSOR WITH RING MAGNET (MAGNET ORDERED SEPARATELY) 
Drawing is for reference only, contact applications engineering for tolerance specific information.

Raised-faced hex Beginning of stroke 'Null' End of stroke 'Span'

flange Type 'T' 51 mm (2 in.) position position
49 mm
(1.92 in.) (see 'Table 2') Null zone Stroke length Dead Zone
19 mm 63.5 mm (2.5 in)
25 mm (0.98 in.) 66 mm (2.6 in.)‡
(0.75 in.) Position magnet

45 mm Electronics
(1.77 in.) Housing

10 mm 25 mm (1 in.) ‡ For stroke lengths > 5000 mm (197 in.)

(0.39 in.) O-Ring Sensor rod 10 mm (0.39 in.) dia.
D53 Connector option 104 mm 2.5 mm (0.10 in.)
(4.09 in.)
Figure 8.  Model RH Rod-style sensor dimension reference (shown with D53 connector option)
MODEL RH, ROD-STYLE SENSOR WITH RING MAGNET (MAGNET ORDERED SEPARATELY) 
Drawing is for reference only, contact applications engineering for tolerance specific information.

Beginning of stroke 'Null' End of stroke 'Span'

85 mm 51 mm (2 in.) position position
49 mm (3.3 in.)
(1.92 in.) 30 mm Null zone Stroke length Dead Zone
(1.2 in.) 63.5 mm (2.5 in)
25 mm (0.98 in.) 66 mm (2.6 in.)‡
Position magnet

45 mm Electronics
(1.77 in.) Housing

O-Ring ‡ For stroke lengths > 5000 mm (197 in.)

Flat-faced hex
10 mm flange Type 'S' Sensor rod
A05 Integral cable option (0.39 in.) 10 mm (0.39 in.) dia.
(see 'Table 2')

Figure 9.  Model RH Rod-style sensor dimension reference (Shown with the A05 Integral cable connection type option)

Housing style (A) (B) (C) A

Flange type Description Flange threads Dimensions Dimensions
T US customary threads with raised-face flange 3/4" - 16 UNF-3A 1.75 in. 2 in. B
S US customary threads with flat-faced flange 3/4" - 16 UNF-3A 1.75 in. 2 in.
C
M Metric threads with flat-faced flange M18 x 1.5 46 mm 53 mm
Table 2.  Model RH Rod-style sensor housing style and flange type references
R-Series Models RP and RH Temposonics® Linear-Position Sensors - Profibus-DP Output
7 Product Data Sheet, Document Part No.: 550990 Revision C (EN) 05/2014
Model RH Rod-Style Sensor
Standard Magnet Selections
Standard magnet options (Model RH)
Magnets must be ordered separately with Model RH position sensors. The standard ring magnet (part number 201542-2) is suitable for most
applications.

POSITION MAGNET SELECTIONS  (Magnet must be ordered separately)  (Drawing dimensions are for reference only)

Magnet and magnet dimensions Description Part number

Standard ring magnet

4 Holes I.D.:  13.5 mm (0.53 in.)
Each 4.3 mm (0.17 in.) dia. O.D.:  33 mm (1.3 in.)
90° apart on Thickness:  8 mm (0.3 in.)
201542-2
24 mm (0.94 in.) dia. Operating temperature: 
- 40 °C to 100 °C

Magnet spacer
4 Holes (Non-ferrous, use with ring magnet
Each 4.3 mm (0.17 in.) dia. Part number: 201542-2)
90° apart on I.D.:  14 mm (0.56 in.)
400633
24 mm (0.94 in.) dia. O.D.:  32 mm (1.25 in.)
Thickness:  3.2 mm (0.125 in.)

Ring magnet
I.D.:  13.5 mm (0.53 in.)
O.D.:  25.4 mm (1 in.)
Thickness:  8 mm (0.3 in.)
400533
Operating temperature: 
- 40 °C to 100 °C

2 Holes
Each 4.3 mm Open-ring magnet, Style M
60° (0.17 in.) dia. on I.D.:  13.5 mm (0.53 in.)
24 mm (0.94 in.) dia. O.D.:  33 mm (1.3 in.)
Thickness:  8 mm (0.3 in.)
25 mm Operating temperature:  251416-2
14 mm (0.97 in.) - 40 °C to 100 °C
(0.55 in.)
21 mm This magnet may influence the sensor perfor-
(0.81 in.) mance specifications for some applications.

MAGNET FLOAT SELECTION  (Drawing dimensions are for reference only)

14 mm (0.55 in.) Min. I.D.
51 mm (2 in.) Magnet float
Spherical O.D. (Level sensing applications)
Specific gravity:  0.70 maximum
Pressure:  870 psi maximum
53 mm CL 251447
(2.1 in.) (This float is used with Model RH rod-style
3.4 mm (0.13 in.) sensors for hydraulic fluid or fresh water
applications only). Collar (part no.: 560777)
is recommended for end of stroke stops.

R-Series Models RP and RH Temposonics® Linear-Position Sensors - Profibus-DP Output

Product Data Sheet, Document Part No.: 550990 Revision C (EN) 05/2014 8
 Model RH Rod-Style Sensors
Mounting, Connections and Wiring
Model RH Rod-Style sensor mounting Cylinder installation
The position magnet requires minimum distances away from ferrous When used for direct-stroke measurement in fluid cylinders,
metals to allow proper sensor output. The minimum distance from the sensor's high pressure, stainless steel rod installs into a bore in
the front of the magnet to the cylinder end cap is 15 mm (0.6 in.). the piston head/rod assembly as shown in Figure 11. This method
guarantees a long-life and trouble-free operation.
The minimum distance from the back of the magnet to the piston
head is 3.2 mm (0.125 in.). However, a minimum distance of at The sensor cartridge can be removed from the flange and rod hous-
least 5 mm (0.197 in.) is preferred for added performance margin. ing while still installed in the cylinder. This procedure allows quick
The non-ferrous spacer part no.: 400633) provides this minimum and easy sensor cartridge replacement, without the loss of hydraulic
distance when used along with the standard ring magnet (part no.: pressure.
201542-2) as shown in Figure 10.
The sensor’s rod housing and flange can remain
permanently installed in the cylinder

Cylinder end cap

Te
m
po
R-

so
Se

ni
r ies

cs
®
®

Ring m
magnet
Piston head

Ring magnet

Nonn fer
ferrous The sensor cartridge consist of the electronics housing
spa cer
spacer and sensing element and is easy to replace by removing
> 15 mm
(2) M4 thread 2.5 mm hex socket head screws
.)
(0.6 in.)
Min. 3.2 mm Figure 11.  Fluid cylinder installation
(0.125 in.)

Figure 10.  Model RH rod-style mounting

Connections and wiring

BUS / INPUT VOLTAGE CONNECTION OPTIONS (DAISY-CHAIN TOPOLOGIES)
(D63) CONNECTOR OPTION (D53) CONNECTOR OPTION

The shielded hybrid cable (5 wires; two bus, two power supply and 1 For (D53) connection types, a separate 4-pin connector and cable is
machine ground, part no.: 530040) is used for both bus and supply used for the supply voltage.
voltage (D63) connections. This provides convenient daisy-chain
connections for applications with multiple Profibus-DP sensors. Profibus

Profibus
24 Vdc
female
male

Profibus Terminator

24 Vdc

(D53) CONNECTOR OPTION WITH THE 'T' CONNECTOR

A 'T' connector is used with the separate bus cable to enable the
220 Ohms bus to remain active when a sensor is disconnected.
RxD/TxD-N 1
RxD/TxD-P 2
Profibus
DGND 3 390 Ohms
Profibus Terminator
VP 4
5 390 Ohms
6

Profibus Terminator
24 Vdc

R-Series Models RP and RH Temposonics® Linear-Position Sensors - Profibus-DP Output

9 Product Data Sheet, Document Part No.: 550990 Revision C (EN) 05/2014
 Model RP and RH Sensors
Connections and Wiring
Connections and wiring (D63) Connections and wiring (D53)
(D63) BUS CONNECTOR OPTION PINOUTS/FUNCTIONS (D53) BUS CONNECTOR OPTION PINOUTS/FUNCTIONS

D63 Male D63 Female D53 D53 D53

6-pin outlet 6-pin outlet Male, 4-pin Male Female
Input voltage 5-pin outlet 5-pin outlet

MALE/FEMALE, 6-PIN (D63) INTEGRAL CONNECTOR MALE/FEMALE, 5-PIN (D53) INTEGRAL CONNECTOR
OPTION FOR SHIELDED HYBRID CABLE FOR BUS AND OPTION
INPUT VOLTAGE

1 2
Male, 5-pin (M12) integral connector pin-out
1
6
5
6
1 6-pin (M16) integral connector
5 Male, pin-out 2 5 4 1
as5 viewed
3
from the end of the sensor
2 4 4 as viewed
2 from the end of the sensor 3 4
3 3

1 2
2 5 4 1 5 3
Female, 5-pin (M12) integral connector pin-out
1 5 5 1 Female, 6-pin (M16) integral connector pin-out3 as viewed from the end of the sensor
6 6 4
2 4 4 2 as viewed from the end of the sensor
3 3
Cable
Cable Pin number wire color Function
Pin number wire color Function 1 N/A VP+5 (Bus termination)
1 Green RxD/TxD-N (Bus) female connector only
2 Red RxD/TxD-P (Bus) 2 Green RxD/TxD-N (Bus)
3 N/A DGnd (Bus termination) 3 N/A. DGnd (Bus termination)
female connector only female connector only
4 N/A VP (Bus termination) female 4 Red RxxD / TxD-P (Bus)
connector only 5 Shield Shield
5 Black +24 Vdc (-15/+20%)
(D53) INPUT VOLTAGE INTEGRAL CONNECTOR OPTION
6 Blue DC ground (for supply)
N/A Yellow/ Shielding, machine ground 4 Input voltage, male, 4-pin (M8) integral
Green 2 3 connector pin-out as viewed from the end of
1 the sensor

Pin number Wire color Function

1 Brown +24 Vdc (-15/+20%)
2 White No connection
3 Blue DC ground (for supply)
4 Black No connection

R-Series Models RP and RH Temposonics® Linear-Position Sensors - Profibus-DP Output

Product Data Sheet, Document Part No.: 550990 Revision C (EN) 05/2014 10
 Models RP and RH Sensors
Cable Connector Options
(D63) CABLE CONNECTOR OPTIONS (FIELD INSTALLABLE)  (Drawing dimensions are for reference only)
Connector and connector dimensions Description Part number
54 mm
(2.1 in.)
Cable connector, female,
18 mm
straight exit (field installation) 370423
6-pin DIN (M16) PG9 size strain relief
(0.7 in.)

58 mm
(2.28 in.)
Cable connector, male,
18 mm straight exit (field installation) 370427
(0.7 in.) dia. 6-pin DIN (M16) PG9 size strain relief

48 mm
(1.9 in.)
Profibus Bus terminator, male 6-pin
18 mm DIN (M16)
252347
(0.7 in.) dia.

(D53) CABLE CONNECTOR OPTIONS (FIELD INSTALLABLE)

Cable connectors and dimension references Description Part number
70 mm
(2.75 in.)
40 mm
(1.58 in.) 9 mm
(0.36 in.)
5-pin Profibus (M12) T connector
41 mm (D53 field installable)
560887
(1.6 in.)

29 mm
19 mm (1.15 in.)
(0.74 in.) dia.

20 mm
(0.77 in.) 5-pin Profibus female connector
(M12) 560885
57 mm
(D53 field installable)
(2.24 in.)

20 mm
(0.77 in.)
5-pin Profibus male connector
(M12) 560884
62 mm (D53 field installable)
(2.44 in.)
43 mm
(1.69 in.) 22 mm
(0.87 in)
5-pin Profibus bus terminator (M12)
16 mm 14 mm (D53 field installable)
560888
(0.64 in.) (0.55 in.)

54 mm
(1.12 in.)
5-pin male connector (M12)
40 mm 90° exit 370515
(1.57 in.) (Field installable)

R-Series Models RP and RH Temposonics® Linear-Position Sensors - Profibus-DP Output

11 Product Data Sheet, Document Part No.: 550990 Revision C (EN) 05/2014
Model RP and RH Sensors
Cable connector options
Cable connectors and dimension references Description Part number
54 mm
(2.12 in.)
5-pin female connector (M12)
38 mm 90° exit 370514
(1.5 in.) (Field installable)

40 mm
(1.58 in.)
4-pin (M8) female connector
12 mm straight exit 370504
(0.58 in.) dia.
(Field installable)

28 mm
(1.1 in.) 12.5 mm
12 mm (0.49 in.) 4-pin (M8) female cable connector
(0.47 in) 90° exit, Adjustable 560886
(Field installable)

EXTENSION CABLE WITH CONNECTORS FOR (D63) CONNECTION TYPES

Extension cable and connector assemblies Description Connection type

Hybrid Profibus Bus Cable, straight exit, 6-pin DIN female connec-
tor, with PG9 strain relief for (D63) sensor connection types
(Assembly Includes D63 Connector, Part no.: 370423 and Cable, Part
Type DF
no.:530040)

Hybrid Profibus Bus Cable, straight exit, 6-pin DIN male connector
with PG9 strain relief for (D63) sensor connection types
(Assembly Includes D63 Connector, Part no.: 370427 and Cable, Part
Type DG
no.:530040)

ORDERING INFORMATION - EXTENSION CABLE WITH CONNECTORS FOR (D63) CONNECTION TYPE

D
1 2 3 4 5 6 7 8

SENSOR CONNECTION TYPES = D 1-2

DF = Female connector, straight exit (part no. 370423), and Profibus cable (part no.: 530040) with (D63) type connector
DG = Female connector, 90° exit (part no. 560778), and Profibus cable (part no.: 530040) with (D63) type connector

CABLE LENGTHS = 3-5

For standard length cables up to 100 ft.
005 = 5 ft.
015 = 15 ft.
025 = 25 ft.
050 = 50 ft.
100 = 100 ft.
For custom length cables over 100 ft.
— — — = Cable length (maximum cable length is dependent on baud rate).
CABLE TERMINATION = 6-8
P0 = Pigtail cable without connector
DFM = Male connector, (Straight exit). For daisy-chain connections of Profibus sensors with D63 connector.
DGM = Male connector, (90° exit). For daisy-chain connections of Profibus sensors with D63 connector.

R-Series Models RP and RH Temposonics® Linear-Position Sensors - Profibus-DP Output

Product Data Sheet, Document Part No.: 550990 Revision C (EN) 05/2014 12
 Models RP and RH Sensors
Ordering Information

R 1 P

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

SENSOR MODEL = R 1-2

RP = Profile style RH = Hydraulic rod style

HOUSING STYLE = 3
Model RP profile-style sensor (includes one magnet):
S = Captive-sliding magnet with ball joint V = Captive-sliding magnet with ball M = Open-ring magnet
at top (Part no. 252182) joint at front (Part no. 252184) (Part no. 251416-2)
Model RH rod-style sensor (magnet(s) must be ordered separately):
T = US customary threads, raised-faced U = Same as option “T”, except uses B = Sensor cartridge only (no
flange and pressure tube, standard fluoroelastomer seals for the flange and pressure tube,
electronics housing stroke length
< 1830 mm (72 in.))
S = US customary threads, flat-faced H = Same as option “S”, except uses
flange and pressure tube, standard fluoroelastomer seals for the
electronics housing
M = Metric threads, flat-faced flange and V = Same as option “M”, except uses
pressure tube, standard fluoroelastomer seals for the
electronics housing
STROKE LENGTH = 4-8
— — — —   M = Millimeters
(Encode in 5 mm increments)
Stroke Length Notes:
— — — . — U = Inches and tenths 1.  Profile-style sensor (model RP) stroke range = 25 mm (1 in.) - 5080 mm. (200 in.)
(Encode in 0.1 in. increments) 2.  Rod-style sensor (model RH) stroke range = 25 mm (1 in.) - 7620 mm (300 in.)

CONNECTION TYPES = 9-11

Integral connector:
D63 = Two 6-pin DIN (M16), male/female, standard
D53 = Two 5-pin DIN (M12), male/female plus one 4-pin (M8) male

Integral cable:
Cable Length Note:
A — — = Integral cable, Hybrid Profibus with pigtail termination Temposonics recommends the maximum
Cable length: integral cable length to be 10 meters (33 ft.).
Encode in feet if using US customary stroke length Cables greater than 10 m (33 ft.) in length are
Encode in meters if using metric stroke length available, however, proper care must be taken
during handling and installation.
> ——= 3 (03) to 98 (98) ft. or 1 (01) to 30 (30) meters.

INPUT VOLTAGE = 12
1 = +24 Vdc (+20% - 15%)

OUTPUT (13 - 16) = P 13-16

P— — —
[1] [2] [3] = Profibus-DP protocol - Enter the 3 digit output code (1-3) defined by the following selections

[1] [2] [3] Protocol

101 = Multi-magnet (multi-position measurement) max. 20 positions
102 = Single magnet measurement (standard)
103 = Position, velocity (max. 5 positions and 5 velocities)
202L = Multi-magnet, up to 20 magnets with Linearity Correction Option (LCO)

NUMBER OF MAGNETS (17- 19) FOR MULTI-POSITION MEASUREMENT ONLY

Z + Enter a 2 digit code = Z 17-19
Z — — = If output P101 or P202L is entered, enter a number between (02 - 20).
[1] [2]
If output P103 is entered, enter a number between (02 - 05)
(For multi-position measurements, additional magnets are ordered separately.)

R-Series Models RP and RH Temposonics® Linear-Position Sensors - Profibus-DP Output

13 Product Data Sheet, Document Part No.: 550990 Revision C (EN) 05/2014
 UNITED STATES 3001 Sheldon Drive Document Part Number:
Temposonics, LLC Cary, N.C. 27513 550990 Revision C (EN) 05/2014
Americas & APAC Region Phone: +1 919 677-0100
E-mail: [email protected]

GERMANY Auf dem Schüffel 9

Temposonics 58513 Lüdenscheid
GmbH & Co. KG Phone: +49 2351 9587-0
EMEA Region & India E-mail: [email protected]

ITALY Phone: +39 030 988 3819

Branch Office E-mail: [email protected]

FRANCE Phone: +33 6 14 060 728

Branch Office E-mail: [email protected]

UK Phone: +44 79 44 15 03 00
Branch Office E-mail: [email protected]

SCANDINAVIA Phone: + 46 70 29 91 281

Branch Office E-mail: [email protected]

CHINA Phone: +86 21 2415 1000 / 2415 1001

Branch Office E-mail: [email protected]

JAPAN Phone: +81 3 6416 1063

Branch Office E-mail: [email protected]

temposonics.com
© 2022 Temposonics, LLC – all rights reserved. Temposonics, LLC and Temposonics GmbH & Co. KG are subsidiaries of Amphenol Corporation. Except for any third party marks for
which attribution is provided herein, the company names and product names used in this document may be the registered trademarks or unregistered trademarks of Temposonics, LLC or
Temposonics GmbH & Co. KG. Detailed trademark ownership information is available at www.temposonics.com/trademarkownership.