6 Watt Amplifier Using TDA2614
6 Watt Amplifier Using TDA2614
auto=webp&frame=1&width=1024&height=1024&fit=bounds&md=f300cef804bb80d9149f3c5485399de4)
(https://content instructables com/ORIG/FF4/ZDEJ/I8BGOO5X/FF4ZDEJI8BGOO5X jpg?
(/member/CircuitToday/)
By CircuitToday More by
(/member/CircuitToday/) the author:
(/member/CircuitToday/)
Follow
A good quality of sound is provided by this amplifier.It is powered by a dual regulated power
supply which makes the circuit easy for building it uses LM7812 and LM7912 and a transformer
of 12-0-12 Volt 5 Amp
auto=webp&frame=1&width=1024&height=1024&fit=bounds&md=db97bff54e4f76c75ef14c92fda30a7d)
(https://content instructables com/ORIG/F3T/M9ZX/I8CVW554/F3TM9ZXI8CVW554 jpg?
It uses dual regulated power supply circuit uses 7812 and 7912 ic.the power supply circuit can
be builded from the datasheets of this voltage regulators it is powered from a 12 volt centre
tapped transformer use of capacitors is important they work as filters use of regulator ic gives a
good filtered power at the output which gives a noise free sound at output
Add Tip V Ask Question | Comment Download
auto=webp&frame=1&width=1024&height=1024&fit=bounds&md=92670cbf2379203d5a898c2dcdb44080)
(https://content instructables com/ORIG/F9B/2YQW/I8CVW557/F9B2YQWI8CVW557 jpg?
Use a 20K Pot to control sound.i have used Nokia Bluetooth Headset to provide input to the
amplifier use a 1uF capacitor before connecting the input to the amplifier ic using a 1uF
Capacitor gives good output
Step 4: Output
auto=webp&frame=1&width=1024&height=1024&fit=bounds&md=04005e
(https://content instructables com/ORIG/FC9/K67G/I8CVW588/FC
here at the output i have used a 30 Watt Woofer and 40 Watt Speaker
1 x LM7812
1 x LM7912
2 x 1000uF Capacitors
2 x 220uF Capacitors
2 x Resistors (1K)
Heatsinks
Breadboard
1 x 20K Pot
1 x 1uF Capacitor
Jumper Wires
auto=webp&frame=1&width=1024&height=1024&fit=bounds&md=5c02c5f1cbfac50e41604f37491f73ac)
(https://content instructables com/ORIG/FBZ/2L14/I8CVXGUE/FBZ2L14I8CVXGUE jpg?
Circuit Diagram
CIRCUIT TODAY
I Made It!
Recommendations
(/Digital-Measuring-Wheel/) (/Arduino-Robotic-Arm-Controlled-by-Touch-
Interface/)
Digital Measuring Wheel (/Digital-
Measuring-Wheel/)
by AGBarber Arduino Robotic Arm Controlled by
(/member/AGBarber/)
in Tools Touch Interface (/Arduino-Robotic-Arm-
Controlled-by-Touch-Interface/)
by
97
8
5.1K
212
8
16K
(/contest/rc2022/) (/contest/2sewornot2sew/)
Add Tip
V Ask Question
| Post Comment
7 Comments
(/member/PammiS3/) PammiS3 (/member/PammiS3/)
5 years ago
Reply
/ Upvote
Looks like the TDA2614 is obsolete now, do you have a device that can perform the same results?
(/member/CircuitToday/) CircuitToday (author)
7 years ago
Reply
/ Upvote
it cost 200-300 rs
(/member/anandrocks/) anandrocks (/member/anandrocks/)
7 years ago
on Introduction
Reply
/ Upvote
hey what was your total cost of this project
(/member/TrendZee/) TrendZee (/member/TrendZee/)
7 years ago
Reply
/ Upvote
I made it
(/member/CircuitToday/) CircuitToday (author)
7 years ago
Reply
/ Upvote
this is my first instructable please comment and help me to improve
(/member/CircuitToday/) CircuitToday (author)
7 years ago
Reply
/ Upvote
The circuit diegram will posted soon
Post Comment