to cool to protect to connect

f.con.e
So c k ets C o nne ct o r s B r a c ke t s
The information given in this catalogue were established and examined
carefully. Nevertheless, mistakes or printing errors, and especially
technical modifications and updating and improvement of our products,
cannot be excluded. All trade marks are recognised even if they are not
specifically identified or mentioned. No identification does not imply that
a product or trademark is not registered. No part of this catalogue may
be reproduced or distributed without prior written consent of Fischer
Elektronik. All data contained in this catalogue, in texts, illustrations,
documents and descriptions are subject to copyright and the provisions
of DIN ISO 16016.

All rights reserved. © Copyright Fischer Elektronik 1968 ... 2023

Fischer Elektronik GmbH & Co. KG

P.O. Box 15 90
58465 Lüdenscheid
GERMANY

House address
Nottebohmstr. 28 • 58511 Lüdenscheid
GERMANY

Phone: +49 2351 435-0

Fax:
sales
+49 2351 45754
purchasing
+49 2351 459433
exports
f.con.e 11- 2022

+49 2351 435185

[email protected]
250

www.fischerelektronik.de/en
 flucticulus conjunctus
from the series
flucticulus,
Homage to Hokusai, 2020

16.000 photos 10 x 15 on cardboard, 60 x 60 cm

from:
Thomas Kellner
www.thomaskellner.com
 A1
A –
A 172

B1
B –
B 78

C1
C –
C 36

D1
D –
D 57

E1
E –
E 105

F1
F –
F 26

G1
G –
G 107

H1
H –
H 19

I1
I –
I 42

K1
K –
K 32

L1
L –
L 16

M1
M –
M 82

N1
N –
N 69
Extruded profiles: A1
extruded heatsinks, extruded heatsinks for lock-in retaining spring, extruded heatsinks for PCB mounting, fin coolers, – A
fluid coolers, high-performance heatsinks
A 172

B1
Heatsinks for processors and LED:
heatsinks and fan coolers for universal PGA/BGA, DIL, PLCC, heatsinks for LED, pin heatsinks – B
B 78

Board level heatsinks: C1

finger-shaped heatsinks, heatsinks for transistors in plastic case, attachable heatsinks, small heatsinks, – C
copper heatsinks for D PAK and others
C 36

Cooling aggregates: D1
miniature cooling aggregates, heatsink cooling aggregates, high capacity cooling aggregates, – D
multi module cooling aggregates, hollow-fin aggregates, cooling aggregates with axial fan
D 57

Thermal interface material and accessories for electronic components: E1

thermally conductive foil made of siliconelastomer, silicone-free thermal conductive foils, GEL thermal conductive foils,
aluminium oxide wafers, mica wafers, thermal conductive paste, thermally conductive adhesive, fixing clamp for – E
mounting rail, guide rails, mounting material for heatsinks E 105

F1
Sockets:
IC-sockets for DIL, PLCC, sockets for transistors, crystal oscillators and connector-sleeves – F
F 26

PCB connectors and accessories: G1

male and female headers, grid spacing 2.54; 2.50; 2.00 and 1.27 mm, high precision contact strips, – G
direct female connectors, jumpers
G 107

H1
IDC connectors:
design DIL, shroud-male header, single and double row female headers, lockable connectors, ribbon cable – H
H 19

D-Sub connectors: I1
USB connectors, RJ45 connectors, D-Sub male and female headers, connectors with mounting option, connectors for ribbon – I
cable, mixed layout connectors, SMD connectors, cover, accessories
I 42

K1
Brackets:
brackets for PC and PCI with or without fixing tab, retainer for ISA versions – K
K 32

Optoelectronics: L1
LED-holders for front panel assembly, LED-holder without LED, LED-holder with mounted LED, – L
light pipes for SMDs
L 16

Cases: M1
shell cases, extruded assembled cases, desk consoles, combination cases, tube cases, miniature aluminium cases, – M
cooling cases, LED line modules, design cases, special front panels, accessories for cases
M 82

N1
19“ Extension systems:
basic case (Rack), plug-in chassis, subracks, insert modules, part front panels, rack handles, PCB holder, accessories – N
N 69
Alphanumerical product list
art. no. page art. no. page art. no. page art. no. page
1706 G F 17 BL 18 219 G 71 DB 50 L I9 DIL 14 P F3
1831 Z F 17 BL 18 G X 1 NEW F 18 DB 50 T I8 DIL 14 PEK F4
ASL 06 SMD H3 BL 19 141 G 71 DB 50 WW 3 I 11 DIL 14 U F3
ASL 08 SMD H3 BL 19 219 G 71 DB BK 09 I 14 DIL 14 W 90 F6
ASL 10 SMD H3 BL 20 SMD G 78 DB BK 15 I 14 DIL 16 06 E Z F5
ASL 12 SMD H3 BL 21 650 G 67 DB BK 25 I 14 DIL 16 06 H Z F5
ASL 14 SMD H3 BL 21 762 G 67 DB BK 37 I 14 DIL 16 E F4
ASL 16 SMD H3 BL 22 SHK 14 02 G G 72 DB BK 50 I 14 DIL 16 G F6
ASL 20 SMD H3 BL 23 SHK 14 02 SMD G G 78 DBM 13W3 L I 23 DIL 16 M F2
ASL 26 SMD H3 BL KG 3 G 68 DBM 13W3 T NEW I 25 DIL 16 N F2
ASL 34 SMD H3 BL LP 1 G 66 DBM 13W3 TA I 26 DIL 16 O F2
ASL 40 SMD H3 BL LP 2 G 66 DBM 17W2 L I 23 DIL 16 P F3
ASL 50 SMD H3 BL LP 3 G 66 DBM 17W2 T NEW I 25 DIL 16 PEK F4
ASLA 06 G H2 BL LP 4 G 66 DBM 17W2 TA I 26 DIL 16 Q F3
ASLA 08 G H2 BL LP 5 SMD G 73 DBM 21WA4 L I 23 DIL 16 SMD M F8
ASLA 10 G H2 BL LP 6 SMD G 74 DBM 25W3 L I 23 DIL 16 SMD SK5 Z F8
ASLA 12 G H2 BL LP 7 SMD G 74 DBM 27W2 L I 24 DIL 18 06 E Z F5
ASLA 14 G H2 BL LP 8 LED SMD G 86 DBM 2W2C L I 22 DIL 18 06 H Z F5
ASLA 16 G H2 BL LP 9 LED G 85 DBM 3W3 L I 22 DIL 18 E F4
ASLA 20 G H2 BLM 1 SMD G 96 DBM 5W5 L I 22 DIL 18 M F2
ASLA 26 G H2 BLM 2 SMD G 96 DBM 7W2 L I 22 DIL 20 E F4
ASLA 34 G H2 BLM 3 SMD G 96 DBM 7W2 T NEW I 25 DIL 20 G F6
ASLA 40 G H2 BLM KG 1 G 93 DBM 7W2 TA I 26 DIL 20 M F2
ASLA 50 G H2 BLM KG 2 G 93 DBM 8W8 L I 22 DIL 20 O F2
ASLAV 10 G H7 BLM LA 1 G 93 DBM 9W4 L I 23 DIL 20 Q F3
ASLAV 20 G H7 BLM LG 1 G 93 DBM 9W4 T NEW I 25 DIL 20 SMD M F8
ASLAV 26 G H7 BLM LG 2 G 93 DBM 9W4 TA I 26 DIL 20 SMD SK5 Z F8
ASLAV 40 G H7 BLP 1 G 84 DB WE 3 I 12 DIL 22 03 M F2
ASLG 06 H2 BLP 2 G 84 DB WE 4 I 12 DIL 22 M F2
ASLG 08 H2 BLR 1 025 Z G 95 DB WR 3 I 12 DIL 22 O F2
ASLG 10 H2 BLR 1 050 Z G 95 DB WR 4 I 12 DIL 22 U F3
ASLG 12 H2 BLR 2 050 Z G 95 DDH 3 E L7 DIL 24 03 M F2
ASLG 14 H2 BLR 2 100 Z G 95 DDH 3 M L7 DIL 24 03 SMD M F8
ASLG 16 H2 BLR 3 025 Z G 95 DDH 3 R L7 DIL 24 04 M F2
ASLG 20 H2 BLR 3 050 Z G 95 DDH 3L L7 DIL 24 M F2
ASLG 26 H2 BLR 4 100 Z G 95 DF 2 MK 9 Z G 98 DIL 24 U F3
ASLG 34 H2 BLR 6 SMD 100 Z G 97 DF 2 OK 9 Z G 98 DIL 28 03 M F2
ASLG 40 H2 BLR 7 SMD 50 Z G 97 DF OB 06 G 98 DIL 28 E F4
ASLG 50 H2 BLV 2 10 G G 94 DF OB 07 G 98 DIL 28 M F2
ASLGV 10 G H7 BLV 2 20 G G 94 DF OB 10 G 98 DIL 28 SMD M F8
ASLGV 20 G H7 BLV 2 26 G G 94 DF OB 17 G 98 DIL 32 E F4
ASLGV 26 G H7 BLV 2 30 G G 94 DH ... 09 UN4 NEW I 33 DIL 32 M F2
ASLGV 40 G H7 BLV 2 40 G G 94 DH ... 15 UN4 NEW I 33 DIL 36 M F2
ASLGY 10 G H4 BLV 2 50 G G 94 DH ... 25 UN4 NEW I 33 DIL 40 E F4
ASLGY 20 G H4 BLV 2 72 G G 94 DH ... 37 UN4 NEW I 33 DILS 04 PK 5 F6
ASLGY 26 G H4 BLY 1 G 87 DH 3 R L6 DILS 06 PK 3 F6
ASLGY 40 G H4 BLY 2 G 87 DH 3 V L5 DILS 08 GA LO F7
ASLGY 44 G H4 BLY 3 G 87 DH 3 W L6 DILS 08 GB LO F7
ASLGY 50 G H4 BLY 4 G 87 DH 5 R L6 DILS 08 GO F7
ASLV 10 SMD G H9 BLY 5 SMD G 89 DH 5 SRC L5 DILS 14 GA LO F7
ASLV 20 SMD G H9 BLY 6 SMD G 90 DH 5 VC L5 DILS 14 GB LO F7
ASLV 26 SMD G H9 BLY 8 SMD G 91 DH 5 W L6 DILS 14 GO F7
ASLV 40 SMD G H9 BLY 9 SMD G 92 DH 09 I 32 DILS 14 PK 3 F6
ASLY 10 SMD G H6 BLY 10 SHK 14 02 G G 88 DH 09 L IP 67 I 34 DILS 16 6 PK 3 F7
ASLY 20 SMD G H6 CAB 3 06 03 Z F 15 DH 15 I 32 DILS 16 GA LO F7
ASLY 26 SMD G H6 CAB 3 08 03 Z F 15 DH 15 L IP 67 I 34 DILS 16 GB LO F7
ASLY 40 SMD G H6 CAB 3 12 03 Z F 15 DH 25 I 32 DILS 16 GO F7
ASLY 44 SMD G H6 CAB 3 14 03 Z F 15 DH 25 L IP 67 I 34 DILS 16 PK 3 F6
ASLY 50 SMD G H6 CAB 3 16 03 Z F 15 DH 37 I 32 DILS 16 PK 5 F6
BADK 09 I 37 CAB 4 G G 99 DH 50 I 32 DILS 18 GA LO F7
BADK 15 I 37 CAB 5 05 G G 99 DH M 09 UN4 NEW I 32 DILS 18 GB LO F7
BADK 25 I 37 CAB 5 10 G G 99 DH M 15 UN4 NEW I 32 DILS 18 GO F7
BADK 37 I 37 CAB 5 Z G 99 DH M 25 UN4 NEW I 32 DILS 18 PK 5 F6
BADK 50 I 37 CAB 6 05 G G 99 DH M 37 UN4 NEW I 32 DILS 24 GA LO F7
BADM 09 I 37 CAB 6 10 G G 99 DH MA 09 UN4 NEW I 33 DILS 24 GB LO F7
BADM 15 I 37 CAB 6 Z G 99 DH MA 15 UN4 NEW I 33 DILS 24 GO F7
BADM 25 I 37 CAB 9 G G 99 DH MA 25 UN4 NEW I 33 DILS 28 6 PK 3 F7
BADM 37 I 37 CAB 10 G S G 100 DH MA 37 UN4 NEW I 33 DILS 28 GB LO F7
BK 01 32 H 17 CAB 11 G S G 100 DH SV 09 I 34 DILS 28 GO F7
BL 1 G 65 CAB 15 G S G 100 DH SV 15 I 34 DILS 40 6 PK 3 F7
BL 2 G 65 CAB 16 G G 100 DH SV 25 I 34 DILS 40 GA LO F7
BL 3 G 65 CB 1 F 14 DH SV 37 I 34 DILS 40 GB LO F7
BL 4 G 65 CB 3 F 14 DH SV 50 I 34 DILS 40 GO F7
BL 5 G 68 CB 6 F 14 DIL 4 OR F5 DLH 21 AGEH L8
BL 5 025 G 68 DB 09 L I9 DIL 6 E F4 DLH 21 AYEH L8
BL 6 G 68 DB 09 L IP 67 I 10 DIL 6 M F2 DS 09 L I9
BL 6 025 G 68 DB 09 SMD TR I 31 DIL 6 P F3 DS 09 L IP 67 I 10
BL 7 G 68 DB 09 T I8 DIL 8 1 OR F5 DS 09 SMD TR I 31
BL 8 G 69 DB 09 WW 3 I 11 DIL 8 2 OR F5 DS 09 T I8
BL 9 G 70 DB 15 L I9 DIL 8 E F4 DS 09 WW 3 I 11
BL 10 G 70 DB 15 L IP 67 I 10 DIL 8 G F6 DS 15 L I9
BL 11 254 G 67 DB 15 SMD TR I 31 DIL 8 M F2 DS 15 L IP 67 I 10
BL 11 508 G 67 DB 15 T I8 DIL 8 O F2 DS 15 SMD TR I 31
BL 12 650 G 67 DB 15 WW 3 I 11 DIL 8 Q F3 DS 15 T I8
BL 12 762 G 67 DB 25 L I9 DIL 08 SMD SK5 Z F8 DS 15 WW 3 I 11
BL 13 G 70 DB 25 L IP 67 I 10 DIL 10 G F6 DS 25 L I9
BL 14 G 70 DB 25 SMD TR I 31 DIL 10 M F2 DS 25 L IP 67 I 10
BL 15 SMD 043 G 75 DB 25 T I8 DIL 10 U F3 DS 25 SMD TR I 31
BL 15 SMD 089 G 75 DB 25 WW 3 I 11 DIL 14 E F4 DS 25 T I8
BL 16 SMD 067 G 76 DB 37 L I9 DIL 14 G F6 DS 25 WW 3 I 11
BL 16 SMD 113 G 76 DB 37 SMD TR I 31 DIL 14 M F2 DS 37 L I9
BL 17 SMD G 77 DB 37 T I8 DIL 14 N F2 DS 37 SMD TR I 31
BL 18 141 G 71 DB 37 WW 3 I 11 DIL 14 O F2 DS 37 T I8
Alphanumerical product list
art. no. page art. no. page art. no. page art. no. page
DS 37 WW 3 I 11 HFD 37 I 39 KHPC 277 K 19 LL 30 PRL 089 NEW L 11
DS 50 L I9 HFK B 09 I 39 KHPC 295 K 20 LL 30 PRL 100 NEW L 11
DS 50 T I8 HFK B 15 I 39 KHPC 308 K 20 LL 30 PRL 127 NEW L 11
DS 50 WW 3 I 11 HFK B 25 I 39 KHPC 325 K 21 LL 30 PRL 159 NEW L 11
DS BK 09 I 14 HFK S 09 I 39 KHPC 365 K 22 LL 30 PRL 190 NEW L 11
DS BK 15 I 14 HFK S 15 I 39 KHPC 391 K 22 LL 30 QRL 032 L 13
DS BK 25 I 14 HFK S 25 I 39 KHPC 398 O K 23 LL 30 QRL 064 L 13
DS BK 37 I 14 ISQ 04 F 13 KHPC 404 K 23 LL 30 QRL 095 L 13
DS BK 50 I 14 ISQ 05 F 13 KHPC 407 K 23 LL 30 QRL 127 L 13
DSM 13W3 L I 18 ISQ 06 F 13 KHPC 439 K 24 LL 30 VRFS 024 L 13
DSM 13W3 T NEW I 20 ISQ 07 F 13 KHPC 454 K 11 LL 30 VRFS 050 L 13
DSM 13W3 TA I 21 ISQ 08 F 13 KHPC 455 K 15 LL 30 VRFS 075 L 13
DSM 17W2 L I 18 KHPC 0 L K3 KHPC335L K 22 LL 30 WRFP 038 L9
DSM 17W2 T NEW I 20 KHPC 0 O K3 KK 04 Z H 16 LL 30 WRFP 050 L9
DSM 17W2 TA I 21 KHPC 002 K8 KK 06 Z H 16 LL 30 WRFP 076 L9
DSM 21WA4 L I 18 KHPC 003 K8 KK 08 Z H 16 LL 30 WRFP 102 L9
DSM 25W3 L I 18 KHPC 005 K 11 KK 10 Z H 16 LL 35 HVS L9
DSM 27W2 L I 19 KHPC 006 K 10 KK 12 Z H 16 LL 50 PRB 032 NEW L 11
DSM 2W2C L I 17 KHPC 007 K8 KK 14 Z H 16 LL 50 PRB 095 NEW L 11
DSM 3W3 L I 17 KHPC 008 K8 KK 16 Z H 16 LL 50 PRB 127 NEW L 11
DSM 5W5 L I 17 KHPC 009 K 11 KK 18 Z H 16 LL 50 PRB 190 NEW L 11
DSM 7W2 L I 17 KHPC 010 K8 KK 20 Z H 16 LL 50 PRB 254 NEW L 11
DSM 7W2 T NEW I 20 KHPC 011 K8 KK 24 Z H 16 LL 50 PRB 318 NEW L 11
DSM 7W2 TA I 21 KHPC 012 K 10 KK 28 Z H 16 LL 50 PRK 032 L 12
DSM 8W8 L I 17 KHPC 013 K8 KK 40 Z H 16 LL 50 PRK 064 L 12
DSM 9W4 L I 18 KHPC 014 K8 KK W H 17 LL 50 PRK 095 L 12
DSM 9W4 T NEW I 20 KHPC 015 K 11 KT 0915 I 37 LL 50 PRK 127 L 12
DSM 9W4 TA I 21 KHPC 016 K9 KT 2550 I 37 LL 50 PRL 089 NEW L 12
DS WE 3 I 12 KHPC 017 K9 KT SV I 35 LL 50 PRL 095 NEW L 12
DS WE 4 I 12 KHPC 018 K 16 LB 02 G F 14 LL 50 PRL 159 NEW L 12
DS WR 3 I 12 KHPC 019 K 14 LB 03 G F 14 LL 50 PRL 190 NEW L 12
DS WR 4 I 12 KHPC 022 K 15 LB 04 G F 14 LL 50 PRL 254 NEW L 12
D W 9 37 H 17 KHPC 024 K 14 LB 06 G F 14 LL 50 PRL 318 NEW L 12
FLMP 06 H 11 KHPC 026 K 17 LB SL 0508 F 15 LL 60 WRB 254 L 10
FLMP 08 H 11 KHPC 027 K 17 LB SL 0762 F 15 LL V 20 089 F NEW L 14
FLMP 10 H 11 KHPC 028 K 17 LB SL 1016 F 15 LL V 20 102 F NEW L 14
FLMP 12 H 11 KHPC 029 K 20 LB SL 1524 F 15 LL V 20 114 F NEW L 14
FLMP 14 H 11 KHPC 031 K 20 LB SL LP 039 SMD F 16 LL V 20 140 F NEW L 14
FLMP 16 H 11 KHPC 032 K 20 LB SLY 06 F 15 LL V 20 152 F NEW L 14
FLMP 20 H 11 KHPC 033 K 19 LEB 01 G F 14 LL V 20 190 NEW L 14
FLMP 26 H 11 KHPC 034 K 20 LEB 02 G F 14 LL V 20 254 NEW L 14
FLMP 34 H 11 KHPC 035 K 19 LEB 03 G F 14 LL V 20 381 F NEW L 14
FLMP 40 H 11 KHPC 036 K 20 LL 4 V 20 254 NEW L 16 LL V 30 114 F NEW L 14
FLMP 50 H 11 KHPC 038 K 13 LL 4 V 30 254 NEW L 16 LL V 30 127 F NEW L 14
FV 03 H 10 KHPC 040 K 13 LL 4 V 40 254 NEW L 16 LL V 30 152 F NEW L 14
FV 04 H 10 KHPC 041 K 13 LL 4 W 20 254 NEW L 16 LL V 30 190 R NEW L 14
FV 05 H 10 KHPC 042 K 16 LL 4 W 30 254 NEW L 16 LL V 30 254 F NEW L 14
FV 06 H 10 KHPC 043 K 18 LL 4 W 40 254 NEW L 16 LL V 30 318 F NEW L 14
FV 07 H 10 KHPC 051 K 20 LL 30 HRP L9 LL V 30 445 F NEW L 14
FV 08 H 10 KHPC 052 K 17 LL 30 HRS L9 LL V 40 114 F NEW L 14
FV 10 H 10 KHPC 053 K 10 LL 30 PRB 025 NEW L 10 LL V 40 127 R NEW L 14
FV 12 H 10 KHPC 054 K 17 LL 30 PRB 032 NEW L 10 LL V 40 140 NEW L 14
FV 13 H 10 KHPC 058 K 19 LL 30 PRB 040 NEW L 10 LL V 40 152 NEW L 14
FV 14 H 10 KHPC 061 K 13 LL 30 PRB 051 NEW L 10 LL V 40 190 F NEW L 14
FV 16 H 10 KHPC 065 K 11 LL 30 PRB 060 NEW L 10 LL V 40 445 R NEW L 14
FV 17 H 10 KHPC 069 K 16 LL 30 PRB 064 NEW L 10 LL W 30 203 178 NEW L 15
FV 18 H 10 KHPC 070 K 17 LL 30 PRB 070 NEW L 10 LL W 30 203 254 NEW L 15
FV 20 H 10 KHPC 072 K 11 LL 30 PRB 080 NEW L 10 LL W 30 203 381 F NEW L 15
FV 24 H 10 KHPC 073 K 14 LL 30 PRB 089 NEW L 10 LL W 30 203 762 F NEW L 15
FV 25 H 10 KHPC 075 K 16 LL 30 PRB 095 NEW L 10 LL W 30 254 254 F NEW L 15
HAB 10 C I 29 KHPC 076 K 12 LL 30 PRB 117 NEW L 10 LL W 30 318 178 F NEW L 15
HAB 10 L I 29 KHPC 078 K 14 LL 30 PRB 127 NEW L 10 LL W 40 203 508 R NEW L 15
HAB 10 T NEW I 29 KHPC 085 K 22 LL 30 PRB 159 NEW L 10 MAH 31 L2
HAB 10 TA I 30 KHPC 093 K8 LL 30 PRB 190 NEW L 10 MAH 41 L2
HAB 20 C I 29 KHPC 094 K8 LL 30 PRE 032 L 12 MAH 51 L2
HAB 20 L I 29 KHPC 095 K9 LL 30 PRE 064 L 12 MAH 61 L2
HAB 20 T NEW I 29 KHPC 096 K8 LL 30 PRE 095 L 12 MAH 71 L2
HAB 20 TA I 30 KHPC 131 K9 LL 30 PRE 127 L 12 MAH 81 L2
HAB 40 C I 29 KHPC 138 K 10 LL 30 PRF 025 NEW L 10 MAH 89 L2
HAB 40 L I 29 KHPC 141 K 10 LL 30 PRF 032 NEW L 10 MAH 99 L2
HAB 40 T NEW I 29 KHPC 142 K 10 LL 30 PRF 040 NEW L 10 MAH 301 L3
HAB 40 TA I 30 KHPC 143 K 11 LL 30 PRF 048 NEW L 10 MAH 302 L3
HAS 10 C I 27 KHPC 144 K 10 LL 30 PRF 050 NEW L 10 MAH 303 L3
HAS 10 L I 27 KHPC 160 K 11 LL 30 PRF 060 NEW L 10 MAH 304 L3
HAS 10 T NEW I 27 KHPC 177 K 12 LL 30 PRF 064 NEW L 10 MAH 305 L3
HAS 10 TA I 28 KHPC 178 K 12 LL 30 PRF 070 NEW L 10 MAH 306 L3
HAS 20 C I 27 KHPC 179 K 12 LL 30 PRF 080 NEW L 10 MAH 307 L3
HAS 20 L I 27 KHPC 185 K 13 LL 30 PRF 089 NEW L 10 MAH 308 L3
HAS 20 T NEW I 27 KHPC 187 K 13 LL 30 PRF 100 NEW L 10 MAH 309 L3
HAS 20 TA I 28 KHPC 188 K 14 LL 30 PRF 159 NEW L 10 MAH 310 L3
HAS 40 C I 27 KHPC 189 K 13 LL 30 PRF 211 NEW L 10 MAH 401 L2
HAS 40 L I 27 KHPC 200 K 15 LL 30 PRL 025 NEW L 11 MAH 402 L2
HAS 40 T NEW I 27 KHPC 218 K 15 LL 30 PRL 030 NEW L 11 MAH 403 L2
HAS 40 TA I 28 KHPC 225 K 15 LL 30 PRL 030 D NEW L 11 MAH 404 L2
HD B 15 L I 13 KHPC 229 K 16 LL 30 PRL 032 NEW L 11 MAH 405 L2
HD B 26 L I 13 KHPC 230 K 15 LL 30 PRL 040 NEW L 11 MAH 406 L2
HD B 44 L I 13 KHPC 241 K 16 LL 30 PRL 048 NEW L 11 MAH 407 L2
HD S 15 L I 13 KHPC 242 K 16 LL 30 PRL 050 NEW L 11 MAH 408 L2
HD S 26 L I 13 KHPC 243 K 17 LL 30 PRL 055 NEW L 11 MAH 409 L2
HD S 44 L I 13 KHPC 262 K 18 LL 30 PRL 060 NEW L 11 MAH 410 L2
HFD 09 I 39 KHPC 267 K 19 LL 30 PRL 064 NEW L 11 MAH 501 L3
HFD 15 I 39 KHPC 270 K 19 LL 30 PRL 070 NEW L 11 MAH 502 L3
HFD 25 I 39 KHPC 271 K 19 LL 30 PRL 080 NEW L 11 MAH 503 L3
Alphanumerical product list
art. no. page art. no. page art. no. page art. no. page
MAH 504 L3 PCI 055 K7 SBAU 1 20 H 15 SL 10 SMD 078 G 23
MAH 505 L3 PCI 065 K 12 SBAU 06 Z H 15 SL 10 SMD 104 G 23
MAH 506 L3 PCI 071 K 15 SBAU 10 Z H 15 SL 10 SMD 130 G 23
MAH 507 L3 PCI 072 K 18 SBAU 14 Z H 15 SL 11 097 G7
MAH 508 L3 PCI 076 K 18 SBAU 16 Z H 15 SL 11 112 G7
MAH 509 L3 PCI 077 K 18 SBAU 20 Z H 15 SL 11 124 G7
MAH 510 L3 PCI 083 K 21 SBAU 26 Z H 15 SL 11 139 G7
MIC 03 F8 PCI 104 K 22 SBAU 34 Z H 15 SL 11 164 G7
MIC 06 F8 PCI LP ... L K4 SB W H 17 SL 11 190 G7
MK 01 G 60 PCI LP ... O K4 SIL 1 G 64 SL 11 214 G7
MK 02 G2 PCI R1 K6 SIL 2 G 64 SL 11 240 G7
MK 03 G2 PEK G F 17 SIL 3 G 64 SL 11 265 G7
MK 04 G2 PF 53 F 10 SK 02 F 18 SL 11 316 G7
MK 05 G2 PF 54 F 10 SK 03 F 18 SL 11 SMD 040 G 24
MK 06 G 61 PF 58 2 F 10 SK 04 Z F 18 SL 11 SMD 052 G 24
MK 07 G 61 PF 58 23 F 10 SK 05 F 18 SL 11 SMD 062 G 24
MK 08 G3 PF 510 F 11 SK 06 F 17 SL 11 SMD 078 G 24
MK 10 G3 PK 1 F 17 SK 08 G F 18 SL 11 SMD 104 G 24
MK 12 X 2 G 60 PK 4 Z F 18 SK 11 F 18 SL 11 SMD 130 G 24
MK 13 X 1 G 60 PLCC 20 F9 SK 13 X 2 G F 17 SL 12 SMD 031 G 25
MK 13 X 2 G 60 PLCC 20 SMD F9 SK 14 X 2 F 18 SL 12 SMD 032 G 25
MK 14 X 1 G4 PLCC 28 F9 SK 17 NEW F 17 SL 12 SMD 035 G 25
MK 14 X 2 G4 PLCC 28 SMD F9 SK 18 NEW F 17 SL 12 SMD 058 G 25
MK 14 X 3 G4 PLCC 32 F9 SK 19 F 17 SL 12 SMD 083 G 25
MK 15 G4 PLCC 32 SMD F9 SK 21 Z NEW F 17 SL 12 SMD 109 G 25
MK 17 G 60 PLCC 44 F9 SK 40 G F 18 SL 13 071 G 15
MK 21 G 69 PLCC 44 SMD F9 SK 41 F 18 SL 13 097 G 15
MK 22 SMD G 79 PLCC 52 F9 SK 42 F 18 SL 13 122 G 15
MK 23 SMD G 81 PLCC 68 F9 SKB 5 Z F 17 SL 13 147 G 15
MK 24 SMD G 80 PLCC 68 SMD F9 SKB 9 Z F 17 SL 13 187 G 15
MK 25 SMD G 80 PLCC 84 F9 SL 1 025 G7 SL 13 235 G 15
MK 26 SMD G 20 PLCC 84 SMD F9 SL 1 053 G7 SL 13 265 G 15
MK 27 SMD G 22 PO A G 63 SL 1 078 G7 SL 13 310 G 15
MK 31 G 60 PQ 18 F 13 SL 1 104 G7 SL 13 365 G 15
MK 51 G4 PQ 18 W F 13 SL 1 128 G7 SL 14 071 G 15
MK 201 G 60 PSB 03 G F 14 SL 1 154 G7 SL 14 097 G 15
MK 202 G2 PV 06 H 12 SL 1 179 G7 SL 14 122 G 15
MK 203 G2 PV 10 H 12 SL 1 230 G7 SL 14 147 G 15
MK 204 G2 PV 14 H 12 SL 2 025 G8 SL 14 187 G 15
MK 205 G2 PV 16 H 12 SL 2 053 G8 SL 14 235 G 15
MK 207 G 61 PV 20 H 12 SL 2 078 G8 SL 14 265 G 15
MK 208 G3 PV 26 H 12 SL 2 104 G8 SL 14 310 G 15
MK 210 G3 PV 34 H 12 SL 2 128 G8 SL 14 365 G 15
MK 212 X 2 G 60 PV 40 H 12 SL 2 154 G8 SL 15 SMD 107 G 31
MK 213 X 1 G 60 PV 50 H 12 SL 2 179 G8 SL 15 SMD 182 G 31
MK 213 X 2 G 60 PVV 10 G H 14 SL 2 230 G8 SL 15 SMD 207 G 31
MK 214 X 1 G4 PVV 20 G H 14 SL 3 025 G 10 SL 16 SMD 107 G 31
MK 214 X 2 G4 PVV 26 G H 14 SL 3 053 G 10 SL 16 SMD 157 G 31
MK 214 X 3 G4 PVV 40 G H 14 SL 3 080 G 10 SL 16 SMD 182 G 31
MK 217 G 60 PV W H 17 SL 3 101 G 10 SL 16 SMD 207 G 31
MK 220 SMD G 83 PVY 10 S H 13 SL 3 131 G 10 SL 16 SMD 247 G 31
MK 221 G 69 PVY 20 S H 13 SL 3 152 G 10 SL 17 SMD 058 G 26
MK 222 SMD G 80 PVY 26 S H 13 SL 3 182 G 10 SL 17 SMD 083 G 26
MK 223 SMD G 82 PVY 40 S H 13 SL 3 207 G 10 SL 17 SMD 109 G 26
MK 226 SMD G 21 PVY 44 S H 13 SL 4 025 G 10 SL 18 042 G 11
MK 228 THR G 62 PVY 50 S H 13 SL 4 101 G 10 SL 18 082 G 11
MK 231 G 60 PVY W H 17 SL 4 152 G 10 SL 18 108 G 11
MK 251 G4 QS 25 GS F 13 SL 5 071 G 14 SL 18 132 G 11
MK LP 18 G 61 RAH 503 L4 SL 5 097 G 14 SL 19 082 G 11
MK LP 19 G 61 RAH 504 L4 SL 5 121 G 14 SL 19 108 G 11
MK LP 40 G5 RAH 505 L4 SL 5 147 G 14 SL 19 132 G 11
MK LP 41 G5 RAH 506 L4 SL 5 156 G G 14 SL 20 THR 097 G9
MK LP 42 G5 RAH 507 L4 SL 5 156 Z G 14 SL 20 THR 112 G9
MK LP 43 G5 RAH 508 L4 SL 5 172 G 14 SL 20 THR 124 G9
MK LP 218 G 61 RAH 509 L4 SL 5 197 G 14 SL 20 THR 139 G9
MK LP 219 G 61 RAH 510 L4 SL 5 223 G 14 SL 20 THR 164 G9
MK LP 240 G5 RJ 45 G I7 SL 5 237 G 14 SL 21 THR 097 G9
MK LP 241 G5 RJ 45 LED I7 SL 5 285 G 14 SL 21 THR 112 G9
MK LP 242 G5 RJ 45 U I7 SL 5 315 G 14 SL 21 THR 124 G9
PCI 0 L K3 RS HH I 34 SL 5 360 G 14 SL 21 THR 139 G9
PCI 0 O K3 RS SH 3 I 35 SL 5 415 G 14 SL 21 THR 164 G9
PCI 004 K7 RS SH 4 I 35 SL 5 525 G 14 SL 22 097 G8
PCI 005 K7 RS SH D I 35 SL 6 071 G 14 SL 22 112 G8
PCI 006 O K7 SB 1 F 19 SL 6 097 G 14 SL 22 124 G8
PCI 011 K9 SB 2 F 19 SL 6 121 G 14 SL 22 139 G8
PCI 012 K 10 SB 3 F 19 SL 6 147 G 14 SL 22 164 G8
PCI 013 K9 SB 4 F 19 SL 6 156 G G 14 SL 22 190 G8
PCI 014 K 14 SB 5 F 19 SL 6 156 Z G 14 SL 22 214 G8
PCI 015 K 14 SB 6 F 19 SL 6 172 G 14 SL 22 240 G8
PCI 016 L K 17 SB 9 F 20 SL 6 197 G 14 SL 22 265 G8
PCI 017 K 17 SB 12 F 20 SL 6 223 G 14 SL 22 316 G8
PCI 018 K 17 SB 13 F 20 SL 6 237 G 14 SL 23 LED SMD 031 G 37
PCI 020 K 19 SB 15 F 20 SL 6 285 G 14 SL 23 LED SMD 058 G 37
PCI 021 K 21 SB 16 F 20 SL 6 315 G 14 SL 24 LED 097 G 35
PCI 031 O K 12 SBAU 1 04 H 15 SL 6 360 G 14 SL 24 LED 112 G 35
PCI 032 K 12 SBAU 1 06 H 15 SL 6 415 G 14 SL 24 LED 124 G 35
PCI 033 K 13 SBAU 1 08 H 15 SL 6 525 G 14 SL 25 LED THR 097 G 36
PCI 035 K 18 SBAU 1 10 H 15 SL 7 G6 SL 25 LED THR 112 G 36
PCI 039 O K9 SBAU 1 12 H 15 SL 8 G6 SL 25 LED THR 124 G 36
PCI 041 K 10 SBAU 1 14 H 15 SL 9 G6 SL 26 SHK 14 02 G G 19
PCI 045 K 14 SBAU 1 16 H 15 SL 10 SMD 040 G 23 SL 27 SHK 14 02 SMD G G 32
PCI 047 K 15 SBAU 1 17 H 15 SL 10 SMD 052 G 23 SL 28 SMD THR 058 NEW G 27
PCI 051 K 23 SBAU 1 18 H 15 SL 10 SMD 062 G 23 SL 28 SMD THR 083 NEW G 27
Alphanumerical product list
art. no. page art. no. page art. no. page art. no. page
SL 28 SMD THR 109 NEW G 27 SLV W 1 130 NEW G 48 SLY 3 041 G 38 VSLV 20 SMD G H9
SLK 3 025 G 10 SLV W 1 KA 030 G 50 SLY 3 082 ... G G 38 VSLV 26 SMD G H9
SLK 4 025 G 10 SLV W 1 KA 055 G 50 SLY 3 082 ... Z G 38 VSLV 40 SMD G H9
SL KA 3 072 G 18 SLV W 1 KA 080 G 50 SLY 4 035 G 38 WWPS 1 G F 17
SL KA 3 085 G 18 SLV W 1 KA 105 G 50 SLY 4 041 ... G G 38 ZEPV 06 H 12
SL KA 3 108 G 18 SLV W 1 SMD 048 G 53 SLY 4 041 ... Z G 38 ZEPV 10 H 12
SL KG 3 113 G 18 SLV W 1 SMD 073 G 53 SLY 4 082 ... G G 38 ZEPV 14 H 12
SL KG 3 126 G 18 SLV W 2 036 NEW G 48 SLY 4 082 ... Z G 38 ZEPV 16 H 12
SL KG 3 147 G 18 SLV W 2 055 NEW G 48 SLY 5 040 G 39 ZEPV 20 H 12
SL LP 1 082 G 12 SLV W 2 080 NEW G 48 SLY 5 075 G 39 ZEPV 26 H 12
SL LP 1 097 G 12 SLV W 2 105 NEW G 48 SLY 5 081 ... G G 39 ZEPV 34 H 12
SL LP 1 112 G 12 SLV W 2 130 NEW G 48 SLY 5 081 ... Z G 39 ZEPV 40 H 12
SL LP 1 139 G 12 SLV W 2 KA 030 10 G 50 SLY 5 122 ... G G 39 ZEPV 50 H 12
SL LP 1 164 G 12 SLV W 2 KA 030 14 G 50 SLY 5 122 ... Z G 39
SL LP 1 190 G 12 SLV W 2 KA 030 16 G 50 SLY 6 040 G 39
SL LP 2 082 G 12 SLV W 2 KA 030 20 G 50 SLY 6 075 G 39
SL LP 2 097 G 12 SLV W 2 KA 030 26 G 50 SLY 6 081 ... G G 39
SL LP 2 112 G 12 SLV W 2 KA 030 30 G 50 SLY 6 081 ... Z G 39
SL LP 2 139 G 12 SLV W 2 KA 030 34 G 50 SLY 6 122 ... G G 39
SL LP 2 164 G 12 SLV W 2 KA 030 40 G 50 SLY 6 122 ... Z G 39
SL LP 2 190 G 12 SLV W 2 KA 030 50 G 50 SLY 7 SMD 036 G 42
SL LP 3 041 G 13 SLV W 2 KA 030 72 G 50 SLY 7 SMD 045 G 42
SL LP 3 069 G 13 SLV W 2 KA 054 10 G 50 SLY 7 SMD 062 G 42
SL LP 4 041 ... G 13 SLV W 2 KA 054 14 G 50 SLY 8 SMD 036 G 43
SL LP 4 069 G 13 SLV W 2 KA 054 16 G 50 SLY 8 SMD 045 G 43
SL LP 5 SMD 038 G 28 SLV W 2 KA 054 20 G 50 SLY 8 SMD 062 G 43
SL LP 5 SMD 051 G 28 SLV W 2 KA 054 26 G 50 SLY 9 SMD 040 G 44
SL LP 5 SMD 066 G 28 SLV W 2 KA 054 30 G 50 SLY 9 SMD 055 G 44
SL LP 6 SMD 038 G 29 SLV W 2 KA 054 34 G 50 SLY 10 SMD 040 G 45
SL LP 6 SMD 051 G 29 SLV W 2 KA 054 40 G 50 SLY 11 SMD 051 G 46
SL LP 6 SMD 066 G 29 SLV W 2 KA 054 50 G 50 SLY 11 SMD 092 G 46
SL LP 7 SMD 030 G 30 SLV W 2 KA 054 72 G 50 SLY 11 SMD 133 G 46
SL LP 7 SMD 040 G 30 SLV W 2 SMD 048 G 54 SLY 12 SMD 051 G 46
SL LP 7 SMD 055 G 30 SLV W 2 SMD 073 G 54 SLY 12 SMD 092 G 46
SLM N 1 063 G 47 SLV W 3 SMD 048 G 56 SLY 12 SMD 133 G 46
SLM N 1 092 G 47 SLV W 3 SMD 073 G 56 SLY 13 SHK 14 02 G G 41
SLM N 1 117 G 47 SLV W 4 036 NEW G 49 SLY 14 SHK 14 02 G G 41
SLM N 11 063 G 47 SLV W 4 055 NEW G 49 SSK B 09 I 40
SLM N 11 117 G 47 SLV W 4 080 NEW G 49 SSK B 15 I 40
SLP 1 16 117 G 33 SLV W 4 105 NEW G 49 SSK B 25 I 40
SLP 1 16 129 G 33 SLV W 4 130 NEW G 49 SSK B 37 I 40
SLP 1 16 144 G 33 SLV W 4 KA 036 10 G 51 SSK S 09 I 40
SLP 1 16 195 Z G 33 SLV W 4 KA 036 14 G 51 SSK S 15 I 40
SLP 2 16 117 G 33 SLV W 4 KA 036 16 G 51 SSK S 25 I 40
SLP 2 16 129 G 33 SLV W 4 KA 036 20 G 51 SSK S 37 I 40
SLP 2 16 144 G 33 SLV W 4 KA 036 26 G 51 TF 3 2 F 11
SLP 2 16 195 Z G 33 SLV W 4 KA 036 30 G 51 TF 53 F 12
SLR 1 025 G 57 SLV W 4 KA 036 34 G 51 TF 54 F 12
SLR 1 050 G 57 SLV W 4 KA 036 40 G 51 TF 56 F 12
SLR 2 050 G 57 SLV W 4 KA 036 50 G 51 TF 58 F 12
SLR 3 025 G 57 SLV W 4 KA 036 72 G 51 TF 183 F 12
SLR 3 050 G 57 SLV W 4 KA 060 10 G 51 TF 184 F 12
SLR 4 050 G 57 SLV W 4 KA 060 14 G 51 TF 510 F 12
SLR 4 100 G 57 SLV W 4 KA 060 16 G 51 TF G F 17
SLR 5 SMD 50 G G 58 SLV W 4 KA 060 20 G 51 USB 2 A 90 I2
SLU 10 165 G 17 SLV W 4 KA 060 26 G 51 USB 2 A 90 V I2
SLU 10 191 G 17 SLV W 4 KA 060 30 G 51 USB 2 A 180 I2
SLU 10 241 G 17 SLV W 4 KA 060 34 G 51 USB 2 A SMD I4
SLU 10 266 G 17 SLV W 4 KA 060 40 G 51 USB 2 B 90 I3
SLU 16 165 G 17 SLV W 4 KA 060 50 G 51 USB 2 B 180 I3
SLU 16 191 G 17 SLV W 4 KA 060 72 G 51 USB 2 B SMD I4
SLU 16 241 G 17 SLV W 4 SMD 048 G 55 USB 3 A 90 I6
SLU 16 266 G 17 SLV W 4 SMD 073 G 55 USB 3 A 90 V I6
SLU 20 165 G 17 SLV W 5 SMD 036 NEW G 56 USB 31 C I6
SLU 20 191 G 17 SLV W 6 092 NEW G 51 USB MC 2 B SMD I5
SLU 20 241 G 17 SLV W 6 117 NEW G 51 USB MN 2 B I3
SLU 20 266 G 17 SLV W 7 092 NEW G 52 USB MN 2 B SMD I4
SLU 26 165 G 17 SLV W 7 117 NEW G 52 V I 38
SLU 26 191 G 17 SLV W 8 092 NEW G 52 V2 I 38
SLU 26 241 G 17 SLV W 8 117 NEW G 52 VBK 1 H 17
SLU 26 266 G 17 SLV W 9 SMD 102 NEW G 53 VFL 06 H 11
SLU 40 165 G 17 SLV W 9 SMD 127 NEW G 53 VFL 08 H 11
SLU 40 191 G 17 SLV W 10 SMD 102 NEW G 55 VFL 10 H 11
SLU 40 241 G 17 SLV W 10 SMD 127 NEW G 55 VFL 12 H 11
SLU 40 266 G 17 SLV W 11 055 NEW G 48 VFL 14 H 11
SLU 50 165 G 17 SLV W 11 080 NEW G 48 VFL 16 H 11
SLU 50 191 G 17 SLV W 11 105 NEW G 48 VFL 20 H 11
SLU 50 241 G 17 SLV W 11 SMD 102 NEW G 54 VFL 26 H 11
SLU 50 266 G 17 SLV W 11 SMD 127 NEW G 54 VFL 34 H 11
SLUP 31 10 G 34 SLV W 22 055 NEW G 48 VFL 40 H 11
SLUP 31 16 G 34 SLV W 22 080 NEW G 48 VFL 50 H 11
SLUP 31 20 G 34 SLV W 22 105 NEW G 48 VG 2 I 38
SLV N 1 055 G 47 SLY 1 081 G 38 VSLGV 10 G H8
SLV N 1 080 G 47 SLY 1 085 G 38 VSLGV 20 G H8
SLV N 1 105 G 47 SLY 1 098 G 38 VSLGV 26 G H8
SLV N 1 130 G 47 SLY 1 104 G 38 VSLGV 40 G H8
SLV N 11 055 G 47 SLY 1 139 G 38 VSLGY 10 G H5
SLV N 11 080 G 47 SLY 2 081 G 38 VSLGY 20 G H5
SLV N 11 105 G 47 SLY 2 085 G 38 VSLGY 26 G H5
SLV W 1 036 NEW G 48 SLY 2 098 G 38 VSLGY 40 G H5
SLV W 1 055 NEW G 48 SLY 2 104 G 38 VSLGY 44 G H5
SLV W 1 080 NEW G 48 SLY 2 139 G 38 VSLGY 50 G H5
SLV W 1 105 NEW G 48 SLY 3 035 G 38 VSLV 10 SMD G H9
Index

Brackets for PC K 3-24

Connector-sleeves F 19-20
Direct female connectors G 98
D-Sub accessories I 37-40
D-Sub connector for flat ribbon cable I 14-16
D-Sub connectors High Density I 13
D-Sub hoods I 32-36
D-Sub in SMD-mounting I 31
D-Sub mixed layout connectors I 17-26
D-Sub standard connectors I 8-12
Female connector H 10-14
Female headers G 60-97
High-precision contacts, loose F 17-18
High-precision sockets and plugs for DIL-IC F 2-8
Jumper links / Separable jumpers F 14-16
Jumpers G 99-100
LED-holders L 5-8
Light pipes for SMDs L 9-16
Male headers G 2-59
Pin contacts, loose I 27-28
Printed circuit connector H 15-17
RJ 45 connectors I7
Shroud-male header H 2-9
Socket contact, loose I 29-30
Sockets for crystal oscillators F 13
Sockets for IC-PLCC F9
Sockets for TO ... cases F 10-12
Spacers for LED L 2-4
USB connectors I 2-6
 foyer of the company

motivated employees committed field service

innovative product development

certified quality management

own tool-making department

foresighted storekeeping
 efficient special machines

up-to-date injection technology

modern surface refinement

Electronica, Fair Munich D

Embedded World, „NürnbergMesse“ D Light + Building, „Messe Frankfurt“ D

Amper, Brno Exhibition Centre CZ IPS - International Parts + Supply, MOC Munich D

You can find current exhibition dates at

www.fischerelektronik.de/en/latest-news/exhibition-and-events-congresses
 Quality-Management System
ISO 9001
Certificate
We are certified to ISO 9001.
This process-directed quality management system implies a Standard ISO 9001:2015
constant focus on satisfying the demands of customers, and
Certificate Registr. No. 09 100 4274
this is the major objective of our company.

The implementation and further development of our quality

management system demonstrably ensures
– guaranteed customer satisfaction and thus the success of Certificate Holder:
our company,
Fischer Elektronik GmbH & Co. KG
– compliance with customers’ requirements at all times Nottebohmstr. 28
through defined processes, 58511 Lüdenscheid
– early detection and prevention of errors, and Germany
– checking of both process effectiveness and efficiency on a
regular basis together with steady improvement.

It is through constant vigilance and the provision of evidence Scope: Design/construction, manufacture, assembly and technical
that we deliver flawless products, which fully comply with advice for heatsinks, sockets, connectors, mounting parts,
quality requirements, that we maintain our quality certifica- cases, 19" assembly systems, computer accessories
tion.
In order to secure lasting company success and to meet our
customers‘ expectations now and in the future, we define Proof has been furnished by means of an audit that the
requirements of ISO 9001:2015 are met.
measurable objectives within the framework of our quality
system, which are regularly checked and developed.
We are committed to constant measurement and improve- Validity: The certificate is valid from 2021-11-01 until 2024-10-31.
ment of our performance. First certification 1994
® TÜV, TUEV and TUV are registered trademarks. Utilisation and application requires prior approval.

Our quality management system applies to all processes

carried out by our company.

2021-09-09
TÜV Rheinland Cert GmbH
Am Grauen Stein · 51105 Köln

Certificate
Standard ISO 14001:2015
www.tuv.com
Certificate Registr. No. 01 104 8209

Environmental Management System

Certificate Holder:
ISO 14001
Fischer Elektronik GmbH & Co. KG
Nottebohmstr. 28
58511 Lüdenscheid
We consider protection of the environment and saving of na-
Germany tural resources entrepreneurial tasks of high priority.

Aware of this, our company was the first German heat-sink

manufacturer to implement, the environmental management
Scope: Design/construction, manufacture, assembly and technical
system in accordance with ISO 14001 in 1998.
advice for heatsinks, sockets, connectors, mounting parts,
cases, 19" assembly systems, computer accessories Our entrepreneurial responsibility comprises preventing
accidents, safeguarding against occupational diseases,
designing workplaces to suit human requirements, develo-
Proof has been furnished by means of an audit that the ping products which are safe to use, saving resources and
requirements of ISO 14001:2015 are met. avoiding environmental impact to the maximum extent
possible.
Validity: The certificate is valid from 2021-10-09 until 2024-10-08.
First certification 1998
We already consider environmental compatibility in the
® TÜV, TUEV and TUV are registered trademarks. Utilisation and application requires prior approval.

product and process development stage. The environmental

impact of our activities is documented, assessed and in a
continuous improvement process reduced to a minimum.

Implementation and consistent working on and with the

2021-09-09
environmental management system is a vital process and
TÜV Rheinland Cert GmbH
Am Grauen Stein · 51105 Köln a constant challenge but finally it will always lead to better
results.

www.tuv.com
Information management norm

Certificate
DIN EN ISO/IEC 27001

Information security is becoming more important. For the suc-

cess of our business information are essential values. Admi-
nistrating and protecting those has our top priority. Standard ISO/IEC 27001:2013
Certificate Registr. No. 01 153 101878
The information security management system to
ISO/IEC 27001 considers three kinds of information:
availability, confidentiality and integrity. Certificate Holder:

This information security management system is the basis for Fischer Elektronik GmbH & Co. KG
continuous monitoring and optimisation processes. Nottebohmstr. 28
It also ensures the scrupulous handling with information. A 58511 Lüdenscheid
protection against attacks on the corporate network and theft Germany
is ensured.

Within the information security management system the risk Scope: Design/construction, manufacture, assembly and sales for
evaluation such as human misconduct takes place by means heatsinks, sockets, connectors, mounting parts, cases, 19"
of error-possibility-influence-analysis. assembly systems, PCB accessory

SoA Version 2.2 dated 14.02.2020

Proof has been furnished by means of an audit that the

requirements of ISO/IEC 27001:2013 are met.

Validity: The certificate is valid from 2020-12-23 until 2023-09-30.

® TÜV, TUEV and TUV are registered trademarks. Utilisation and application requires prior approval.

2021-01-12
TÜV Rheinland Cert GmbH
Am Grauen Stein · 51105 Köln

www.tuv.com

The authorised economic operator

AEO-certificate

Since 1st January 2008 companies based in the European

Union and involved in customs activities have been able to ap-
ply for the status of Authorised Economic Operator (AEO). The
status entitles a benefit of safety-relevant custom controls and/
or simplification according to custom regulations.

The goal is here to ensure an uninterrupted global supply chain

from the producer to the end user. The status of an authorised
economic operator is valid in all Member States and is not
limited in time.

Our company has the status AEO-C (customs simplification).

The legal requirements of an authorised economic operator are

essentially the result of:
Article 5a community custom code (ZK)
Article 14a - 14x community custom code implementing provi-
sion (ZK-DVO)
Explanations – references – printings

... index area: ... index area:

shows topics/categories shows topics/categories
F “current”
G “following”

... page number

G 15
G = gold-plated ... option for surface finishing
Z = tin-plated
S = selective gold-plated

... plastic of the insulator is suitable for

reflow-soldering up to 260 °C

... components are suitable for soldering technique (THT)

... components are suitable for SMD technique

... components are suitable for THR-SMD technique

... components are suitable for press-fit mounting

... components are suitable for the corresponding grid

2,54

Imprinting of cardholders - Your and our time is expensive

An order for imprinting must state the font, the font size and the exact position of the imprint with dimensions, taking in
account of countersunk holes etc.. When placing the first order, the company logo must be supplied as a vector file. If these
conditions are not complied with, the order for imprinting may have to be rejected, or additional costs will have to be charged.

Compliance with the following criteria ensures smooth handling:

Adobe Illustrator (.ai; .eps) without half-tone images, fonts transformed into paths or supplied
Adobe Acrobat (.pdf) all fonts enclosed; half-tone images colour-separated (full-tone or scale colours) and
InDesign (.indd) with correct resolution (300 dpi colour, black / white 600 dpi), no RGB

All this takes additional time and consequently incurs extra costs.
The usability must be checked by our printing shop:
In most cases screen formats (.jpg, .gif, .png) and paper copies, stickers and similar are not
suitable for preparing printer‘s copies!

Copies that definitely cannot be used:

Imperfect copies such as fax copies / Microsoft Office files (.doc, .xls, .ppt) can only be used for information or for transmitting texts.

Please always add dimensional drawings (.dxf) to the parts to be imprinted!

Please note as a general rule: Retouching work extending beyond the standard time will be invoiced additionally at cost price.

No part of this catalogue may be reproduced or distributed without prior written consent of Fischer Elektronik.
All data contained in this catalogue, in texts, illustrations, documents and descriptions are subject to copyright
and the provisions of DIN ISO 16016. All rights reserved.

© Copyright Fischer Elektronik 1969 ... 2023

 A
Technical introduction for the connector catalogue
General points
Product specified characteristics for the particular article can be found in the category “technical data”! Additional customer specified
advice and solution proposals will be supported from the R&D department of company Fischer Elektronik GmbH & Co. KG. B
Surface – electroplating processes
In general all contacts are coated with a nickel barrier layer (1.3-3 µm) before they get tinned or gold-plated. This will also apply for
selective gold-plated contacts.
For the selective coated contacts the complete contact will be nickel-plated including the carrier strip first. After this the contact side will
be gold-plated and the solder side tinned, usually in the “dipping method” or “brush method”. Depending on the overall contact length C
the middle area is exclusively nickel-plated.
The layer thickness of the gold-plating is at least 0.2 µm Au, the layer thickness of the tinning is 4-6 µm! Other layer thicknesses are
possible upon request.
The tinning is done with pure tin. The solderability is guaranteed for at least 1 year after shipment. At appropriate storage in closed
packing this period can be increased significantly.
D
Dimensional tolerance
Generally the DIN ISO 2768m is applied to all products! Moreover following additions have to be noticed:
– the length tolerance of contact pins is +/-0.2 mm
– the space allowance is +/-0.03 mm, the overall space allowance over 36 pins +/-0.2 mm
– the shape tolerance of the insulating body is defined by +/-0.15 mm
– the separation of number of pins by means of cutting: +0.6 mm/-0.3 mm E
– the separation of number of pins by means of sawing: +0.1 mm/-0.4 mm (no standard)
– coplanarity of SMD solder connections max. 0.15 mm with a bar length of 50 mm according to DIN EN 61760-1

Quality grading in conformity with DIN 41652

Depending on the layer thickness of the gold-plating the contacts can be classified in quality classes.
A distinction is made in three quality classes: F
Quality class 1: at least 500 cycles of operation, layer thickness accordingly at least 1.2 µm Au
Quality class 2: at least 200 cycles of operation, layer thickness accordingly at least 0.75 µm Au
Quality class 3: at least 50 cycles of operation, layer thickness accordingly at least 0.2 µm Au
In case that tinned contacts are used „tin on tin“ we can guarantee max. 10 cycles of operation.

Precision socket contacs G

These contacts are two-piece parts and consist on a sleeve (turned part) and a spring element (stamped part). The spring element
(clip) is always gold-plated (depending on the article at least 0.2 µm Au or at least 0.75 µm Au). The sleeve is usually tinned, for some
versions also optionally gold-plated (at least 0.2 µm Au).

Contact carrier material made of high-temperature resistant plastic

The plastics used for the male and female headers are mainly high-temperature resistant which means that they are suitable for the use
H
in the reflow soldering technique.
This applies primarily for SMD components as well as for plug connectors which are constructed for wave soldering. In the catalogue
those products are marked with a 260 °C logo in the header of the particular page.

© Copyright Fischer Elektronik 1968 ... 2023 N

 Precision sockets and plugs for ICs with high
packing density
Precision sockets and plugs for DIL-ICs
Customer specified DIL-IC sockets
Mounting sockets for discrete components,
jumper links and connectors

Precision sockets and plugs for ICs with high Precision sockets and plugs for DIL-ICs
packing density • precision sockets and plugs in soldering (THT) and
• PLCC-socket for soldering technology (THT) SMD technology
• PLCC-socket for SMD technology • low profile • DIL-IC sockets with extractor
• type of packaging: bar magazine • open and closed design

Customer specified DIL-IC sockets Mounting sockets for discrete components,

• sockets for LED displays jumper links and connectors
• Dual-in-line plug in adapter • sockets for TO 5 cases
• IC-sockets partially loaded with oscillators and relays • plug-in sockets for chrystal oscillators
• jumper links with and without insulators
• precision pins and bushings, bulk
• connectors, with and without insulator
 2.54 A
High-precision sockets and plugs for DIL-IC
– other number of contacts upon request!
D
B
C

PK 1

3,9

A
3

B
7,4
C
Ø 0,5 2,54
art. no. no. of dim. [mm] art. no. no. of dim. [mm]
contacts A B C D contacts A B C D
DIL 6 M ... 6 7.6 DIL 22 M ... 22 10.16 12.7 6.6 27.9
DIL 8 M ... 8
3.8
10.1 DIL 24 03 M ... 7.62 10.1 4.0 D
DIL 10 M ... 10 4.7 12.7 DIL 24 04 M G 24 10.16 12.7 7.1 30.6
DIL 14 M ... 14 4.9 17.7 DIL 24 M ... 15.24 17.7 11.6
7.62 10.1
DIL 16 M ... 16 3.5 20.4 DIL 28 03 M ... 7.62 10.1 4.0
28 35.7
DIL 18 M ... 18 4.1 23.0 DIL 28 M ... 11.3
DIL 20 M ... 20 3.4 25.5 DIL 32 M ... 32 15.24 17.7 11.2 40.6
E
DIL 22 03 M Z 22 4.8 27.9 DIL 36 M G 36 10.6 45.6
D
C

F
3

4,95
17,9

A
B

WWPS 1

0,635 2,54
art. no. no. of dim. [mm] art. no. no. of dim. [mm] G
contacts A B C D contacts A B C D
DIL 14 N ... 14 7.62 10.1 4.9 17.7 DIL 16 N ... 16 7.62 10.1 3.5 20.4
please indicate: ... surface of contact
G = gold-plated
Z = tin-plated H
contact spring: gold-plated

Ø 0,6 D
4,7

C
I
12,1
3,5

A
3

PK 3

Ø 0,45 2,54
K
art. no. no. of dim. [mm] art. no. no. of dim. [mm]
contacts A B C D contacts A B C D
DIL 8 O ... 8 3.8 10.1 DIL 20 O G 20 7.62 10.1 3.4 25.5
DIL 14 O ... 14 7.62 10.1 4.9 17.7 DIL 22 O ... 22 10.16 12.7 6.6 27.9
DIL 16 O ... 16 3.5 20.4 L
please indicate: ... surface of contact
G = gold-plated
Z = tin-plated

Technical data ➔ F 21 – 26
F2 N
A 2.54
High-precision sockets and plugs for DIL-IC
– other number of contacts on request!

B D

4,25
C

12,5
PK 4

A
B
4,25
C
Ø 0,45 2,54

art. no. no. of dim. [mm] art. no. no. of dim. [mm]
contacts A B C D contacts A B C D
DIL 6 P Z 6 3.8 7.6 DIL 16 P Z 16 7.62 10.1 3.5 20.4
D DIL 14 P Z 14
7.62 10.1
4.9 17.7
D

3
C

E
SK 02
3,55
10,6
3

A
B
Ø 0,45 2,54

art. no. no. of dim. [mm] art. no. no. of dim. [mm]
F contacts A B C D contacts A B C D
DIL 8 Q G 8 3.8 10.1 DIL 20 Q Z 20 7.62 10.1 3.4 25.5
7.62 10.1
DIL 16 Q Z 16 3.5 20.4
Ø 0,47

G
D
4,2

6,1

C
13,45

A
B

SK 14 X 1
3

3,9

H 2,54
Ø 0,47

art. no. no. of dim. [mm] art. no. no. of dim. [mm]
contacts A B C D contacts A B C D
DIL 10 U Z 10 4.7 12.7 DIL 22 U ... 22 10.16 12.7 6.6 27.9
I DIL 14 U G 14
7.62 10.1
4.9 17.7 DIL 24 U ... 24 15.24 17.7 11.6 30.6
please indicate: ... surface of contact
G = gold-plated
Z = tin-plated

K Socket layout for various numbers of contacts for DIL-IC, open frame
6-16 pol. 18-32 pol. 36 pol.

Technical data ➔ F 21 – 26

N F3
 2.54 A
High-precision sockets and plugs for DIL-IC
D

PK 1
B

3,9
3

A
7,4

B
Ø 0,5
2,54
C
art. no. no. of dim. [mm] art. no. no. of dim. [mm]
contacts A B D contacts A B D
DIL 6 E ... 6 7.6 DIL 20 E ... 20 7.62 10.3 25.5
DIL 8 E ... 8 10.1 DIL 28 E ... 28 35.5
DIL 14 E ... 14 7.62 10.3 17.7 DIL 32 E ... 32 15.24 17.7 40.6 D
DIL 16 E ... 16 20.4 DIL 40 E ... 40 50.8
DIL 18 E ... 18 23.0
please indicate: ... surface of contact
G = gold-plated
Z = tin-plated E
contact spring: gold-plated

Socket layout for various numbers of contacts for DIL-IC, closed frame
6 pol. 8 pol. 14-22 pol.
F
28 pol. 32-40 pol.

G
DIL-IC-sockets with extractor

B C D H
0,5
5,5
9,5

A
4

2,54 Ø 0,5

art. no. no. of dim. [mm] art. no. no. of dim. [mm]
I
contacts A B C D contacts A B C D
DIL 14 PEK 14 7.62 10.1 12 17.0 DIL 16 PEK 16 7.62 10.1 12 20.3
contact spring: gold-plated
contact sleeve: gold-plated
K

Technical data ➔ F 21 – 26
F4 N
A 2.54
High-precision sockets and plugs for DIL-IC
IC-sockets partially equipped, e.g. for oscillators and relays
B

0,5
17,78
15,24 5,0 3
15,24 2,54 7,6

7,62
10,1
7,62

7,62

10,1
10,1
0,7
17,6 17,6 20,1 4,2
C

1,35
DIL 4 OR ... DIL 8 1 OR ... DIL 8 2 OR ...
art. no. no. of contacts
DIL 4 OR ... 4
DIL 8 1 OR Z
8
D DIL 8 2 OR ...
please indicate: ... surface of contact
G = gold-plated
Z = tin-plated
contact spring: gold-plated
E LED display sockets of 0.6" pitch

Ø 2,2
A
0,8

3,15

15,24
7,62

19
4,3

Ø 0,5 2,54
Ø 1,37

art. no. no. of dim. [mm] art. no. no. of dim. [mm]
G contacts A contacts A
DIL 16 06 E Z 16 20.3 DIL 18 06 E Z 18 22.8
Ø 2,2

A
3,15
1,6

H
15,24
7,62
14,75

19

0,635 2,54
Ø 1,32

I art. no. no. of

contacts
dim. [mm] art. no. no. of
contacts
dim. [mm]
A A
DIL 16 06 H Z 16 20.3 DIL 18 06 H Z 18 22.8
contact spring: gold-plated
contact sleeve: tin-plated
K

Technical data ➔ F 21 – 26

N F5
 2.54 A
High-precision sockets and plugs for DIL-IC
LED display sockets in vertical construction
10,1 A
B

Ø 3,6
2,54

B
6,2
C

3,8
Ø 0,5
7,62 2,54 10,16

art. no. no. of dim. [mm]

contacts A B
DIL 14 W 90 14 27.7 22.7
contact spring: gold-plated
D
contact sleeve: tin-plated
Ø 2,2

A
3,15

E
7,62
10,1

3,2

3,8
2,54 Ø 0,5 Ø 0,5

7,62
5,6
F
art. no. no. of dim. [mm] art. no. no. of dim. [mm]
contacts A contacts A
DIL 8 G Z 8 10.1 DIL 16 G ... 16 20.3
DIL 10 G ... 10 12.7 DIL 20 G ... 20 25.4
DIL 14 G ... 14 17.7 G
please indicate: ... surface of contact
G = gold-plated
Z = tin-plated
contact spring: gold-plated
H
DIL adaptor plugs
PK 3 SK 02 ( PK 5) PK 3 SK 02 ( PK 5)
3,15
3,5

3,15

I
2,54 2,54
3,4
4,7
12,1

10,1

10,1
7,62

7,62
10,6

B B
Ø 0,45 Ø 0,45 A A

art. no. no. of dim. [mm] art. no. no. of dim. [mm] K
contacts A B contacts A B
DILS 04 PK 5 4 5.0 2.54 DILS 16 PK 3
16 20.3 17.78
DILS 06 PK 3 6 7.6 5.08 DILS 16 PK 5
DILS 14 PK 3 14 17.7 15.24 DILS 18 PK 5 18 23.0 20.32
surface of contact: gold-plated L

Technical data ➔ F 21 – 26
F6 N
A 2.54
High-precision sockets and plugs for DIL-IC
PK 3 SK 02 ( PK 5)
B
Ø 1,8
A Ø 0,6 Ø 1,8

3,17

0,45
Ø 0,85

4,2

3,15
4,2

7,62

(12,11)
17,75
15,24
7,62
Ø 1,55

10,4
3,4
Ø 1,55

3,9
Ø 1,3 Ø 1,3

4
Ø 0,46
C B
Ø 0,45
Ø 0,45

art. no. no. of dim. [mm] art. no. no. of dim. [mm]
contacts A B contacts A B
DILS 28 6 PK 3 28 35.5 33.02 DILS 16 6 PK 3 16 20.3 17.78
DILS 40 6 PK 3 40 50.8 48.26
D surface of contact: gold-plated

DIL platforms
– suitable for DIL-cases DILS ... GA LO

E A

2,5
9

B
3,8

C
F
2,54

art. no. no. of dim. [mm] art. no. no. of dim. [mm]
contacts A B C contacts A B C
DILS 08 GO 8 12.4 DILS 24 GO 24 32.8
DILS 14 GO 14 20.0 DILS 28 GO 28 37.8 20.1 15.24
12.5 7.62
G DILS 16 GO 16 22.6 DILS 40 GO 40 53.1
DILS 18 GO 18 25.2
surface of contact: gold-plated

DIL cases - grid spacing 2.54 mm

H – suitable for DIL plugs DILS ... GO
B

I H
L

art. no. dim. [mm] art. no. dim. [mm]

B H L B H L
K DILS 08 GA LO 12.4 DILS 14 GB LO 20.0
DILS 14 GA LO 20.0 DILS 16 GB LO 12.5 22.6
12.5
DILS 16 GA LO 22.6 DILS 18 GB LO 25.2
6.7 11.7
DILS 18 GA LO 25.2 DILS 24 GB LO 32.8
DILS 24 GA LO 32.8 DILS 28 GB LO 20.1 37.8
L DILS 40 GA LO
20.1
53.1 DILS 40 GB LO 53.1
DILS 08 GB LO 12.5 11.7 12.4

Technical data ➔ F 21 – 26

N F7
 2.54 A
High-precision sockets and plugs for DIL-IC
SMD-plug for DIL
– with SK 5-contacts
– other number of contacts on request! B
10
2,54 Ø 0,47 5,8

3,5
C
1,4

A
B

A
C

Ø 0,47

0,5
D 3
1 2,54

art. no. no. of dim. [mm] art. no. no. of dim. [mm]
contacts A B C D contacts A B C D D
DIL 08 SMD SK5 Z 8 10.0 DIL 20 SMD SK5 Z 20 7.62 10.1 3.5 25.2
7.62 10.1 3.5
DIL 16 SMD SK5 Z 16 20.1
surface of contact: tin-plated

SMD socket for DIL-IC E

– other number of contacts upon request!
A 5,9
2,2

3
F

0,5

C
B
D

C
3 1 2,54
2,54 Ø 0,5
art. no. no. of
contacts A
dim. [mm]
B C D
art. no. no. of
contacts A
dim. [mm]
B C D
G
DIL 16 SMD M 16 20.1 DIL 24 03 SMD M 24 30.3 10.1 7.62 3.5
10.1 7.62 3.5
DIL 20 SMD M 20 25.2 DIL 28 SMD M 28 35.4 17.6 15.24 11.2
contact spring: gold-plated
contact sleeve: tin-plated H
IC-mounting tools - Design DIL

K
art. no. spacing of contact rows [mm]
MIC 03 7.62
MIC 06 15.24
material: polyacetole, non-conductive L

Technical data ➔ F 21 – 26
F8 N
A
Sockets for IC-PLCC
– PLCC sockets for case design EIA/JEDEC TYPE "A"
– VPE = packing unit (pieces/tube)
B – data sheet for pin configuration of individual PLCC sockets available upon request
– dual polarity indicators guarantee the correct alignment of the chip
– drainage holes for easier inside cleaning
– test holes are moulded next to each contact

0,45 x 0,25
C
1,27
2,54

2,54

A2
D2
B2
A2
A2
D2

,0 2
D

Ø1
A1

1,27
3 A1
D1
8,2 B1
art. no. no. of packing dim. [mm]
contacts unit A1 A2 B1 B2 C Ø D1 Ø D2
PLCC 20 20 39 5.08 5.08 15.55 15.55 16.7 10.16 10.16
E PLCC 28 28 33 7.62 18.10 20.3 12.70
7.62 18.10 12.70
PLCC 32 32 29 10.16 20.70 22.2 15.24
PLCC 44 44 25 12.70 12.70 23.20 23.20 27.5 17.78 17.78
PLCC 52 52 23 15.24 15.24 25.70 25.70 31.0 20.32 20.32
PLCC 68
F PLCC 84
68 19 20.32 20.32 30.80 30.80 37.3 25.40 25.40
84 16 25.40 25.40 36.00 36.00 44.5 30.48 30.48
surface of contact: tin-plated

SMD sockets for PLCC - low profile housing

– these PLCC sockets conform to case designs EIA/JEDEC TYPE "A"
G – VPE = packing unit (pieces/tube)*dimensions ±0.2 mm; tin-plated phosphorbronze socket contacts
– dual polarity indicators guarantee the correct alignment of the chip
– drainage holes for easier inside cleaning
– test holes are moulded next to each contact
– efficient heat dissipation
– packing: bar magazine
H B 0,2
D 0,2
1,27
4
C 0,2

I
A

0,75
1,27
Q

art. no. no. of packing unit dim. [mm]

K contacts A B C D Q
PLCC 20 SMD 20 32 15.65 15.65 5.08 5.08 16.0
PLCC 28 SMD 28 27 18.16 7.62 20.6
18.16 7.62
PLCC 32 SMD 32 24 20.66 10.16 22.5
PLCC 44 SMD 44 22 23.27 23.27 12.70 12.70 27.5
L PLCC 68 SMD 68 16 30.89 30.89 20.32 20.32 38.8
PLCC 84 SMD 84 14 35.97 35.97 25.40 25.40 44.8
surface of contact: tin-plated

Technical data ➔ F 21 – 26

N F9
 A
Sockets for TO ... cases
Transistor sockets for TO 5
B

0,75
R 1,5 2,9

Ø 5,08
Ø 1,8

Ø 0,5
1,6
45°

Ø 9,5
3,9
Ø 1,55

7,4
C
4,
Ø 1,35

25
Ø 0,5 3,9
7,4
art. no. no. of contacts
PF 53 ... 3

0,75
2,9

Ø 5,08
R 1,5 Ø 1,8
45 °

Ø 0,5
1,6

Ø 9,5
3,9
Ø 1,55

7,4 E
4,

Ø 1,35
25

Ø 0,5 3,9
7,4
art. no. no. of contacts
PF 54 ... 4
0,75

2,9
Ø 5,84

R 1,5 Ø 1,8
F
1,6

Ø 0,5
45 °

Ø 9,5
3,9

Ø 1,55
7,4
4,

Ø 1,35
25

Ø 0,5 4,2 G
7,4

art. no. no. of contacts

PF 58 23 ... 8
please indicate: ... surface of contact
G = gold-plated H
Z = tin-plated
contact spring: gold-plated

Ø 1,53 2,9
R 1,5
Ø 5,08

Ø 1,4

I
1
2,3

Ø 0,5
3,7

45°
4,2

Ø 9,5
7,4

Ø 1,3
4,
25

K
3,9
Ø 0,5 7,4

art. no. no. of contacts

PF 58 2 G 8
contact spring: gold-plated
contact sleeve: gold-plated
L

Technical data ➔ F 21 – 26
F 10 N
A
Sockets for TO ... cases
Sockets for TO 5
B R 1,5 Ø 1,53 2,9

Ø 5,84
Ø 1,4

1
2,3

3,7

Ø 0,5
4,2
36°

Ø 9,5
7,4
Ø 1,3

4,
C

25
4,2
Ø 0,5 7,4

art. no. no. of contacts

PF 510 G 10

D contact spring: gold-plated

contact sleeve: gold-plated

Sockets for power transistors TO 3

30,2

E
Ø 5,5 17
39,8
Ø 6,4

1,5

0,8
11,4
Ø 5,5

10,9
17,5

4
5,9
14,6

Ø 3,3
F
art. no. no. of contacts
TF 3 2 3
surface of contact: gold-plated

Technical data ➔ F 21 – 26

N F 11
 A
Sockets for TO ... cases
Transistor sockets - teflon sockets for TO 5
B

5,2
5,2

7,3
7,3

Ø 5,08
Ø 10,3

1,5
1,5
Ø 10,3
Ø 5,08
Ø9

6,9
6,9
Ø9

C
45°
45° R 0,5
R 0,5 Ø 0,5 Ø 0,5
art. no. no. of contacts art. no. no. of contacts
TF 53 3 TF 54 4

5,2
5,2

7,3
7,3
Ø 10,3
Ø 5,08

1,5
1,5

Ø 10,3
Ø 5,08
Ø9

6,9
6,9
Ø9
45° 45°
R 0,5 R 0,5
Ø 0,5 Ø 0,5
art. no. no. of contacts art. no. no. of contacts E
TF 56 6 TF 58 8
5,2
Ø 5,84
Ø 10,3

7,3
1,5

F
6,9

Ø9
18°
R 0,5
36°
Ø 0,5
art. no. no. of contacts
TF 510 10 G
Transistor sockets - teflon sockets for TO 18
Ø 2,54
Ø 2,54

5,5
5,5
7,3

7,3
H
1,5
1,5

Ø 7,3
Ø 7,3

6,9
6,9

Ø6 Ø6
45° 45°
R 0,5 R 0,5
Ø 0,5 Ø 0,5
art. no. no. of contacts art. no. no. of contacts
TF 183 3 TF 184 4 I
contact spring: gold-plated
contact sleeve: gold-plated

Technical data ➔ F 21 – 26
F 12 N
A
Sockets for crystal oscillators
art. no.
4,9
B

9
16
C QS 25 GS
12,5 5

surface of contact: silver-plated

Precision sockets for crystal oscillators in case HC 18

art. no.

0,75
D Ø 1,8

4,9

1,6
3,9
4,2
Ø 1,55
7,4

4,5

7,4
Ø 1,35
E Ø 0,53 6,5 Ø 0,5
PQ 18 ...
art. no. Ø 1,8
Ø 1,5
4,2

4,1
4,95
Ø 1,37
4,9

0,7
Ø 1,32
F
18

0,75
2,6
4,5

13
6,5

PQ 18 W ... Ø 0,635 0,635

G please indicate: ... surface of contact

G = gold-plated
Z = tin-plated
contact spring: gold-plated

Insulators for crystal oscillators

H * = equates self retaining

4,9
D
C
5,6

I
11,8
0,13

art. no. case design dim. [mm]

C D
K ISQ 04
-
0.71
ISQ 05 *
HC-18/U/ HC-49/U/ HC-43/U
ISQ 06 0.71
2.4
ISQ 07 *
ISQ 08 HC-50/U/ HC-42/U/ HC-25/U - 1.30
L dialectric strength: 9 kV
name of foil: MYLAR
heat resistance: 250°C
material thickness: 0.127 mm
M

Technical data ➔ F 21 – 26

N F 13
 7.62
A
Jumper links / Separable jumpers
Jumper links
B
B

Ø2
8
Ø1

A C
art. no. dim. [mm] art. no. dim. [mm]
A B A B
LB 02 G 5.08 2.0 LB 04 G 10.16 7.0
LB 03 G 7.62 4.5 LB 06 G 15.24 12.0
surface of contact: gold-plated
D

E
6,5

Ø 0,5

art. no. dim. [mm] art. no. dim. [mm]

A A F
CB 1 ... 2.54 CB 6 G 7.62
CB 3 ... 5.08
please indicate: ... surface of contact
G = gold-plated
Z = tin-plated G
4,9 7,5 10 2,4

4,2
2,6
H

3,6
A A A Ø 0,56

art. no. dim. [mm] art. no. dim. [mm]

A A
LEB 01 G 2.54 LEB 03 G 7.62 I
LEB 02 G 5.08
surface of contact: gold-plated
0,45

2,54
2,54 K
10,16
7,62

L
3,68

art. no.
PSB 03 G
surface of contact: gold-plated
M

Technical data ➔ F 21 – 26
F 14 N
A 2.54
Jumper links / Separable jumpers
Separable jumpers for soldering technology
– the contacts have a preformed dividing groove and can easily be separated with a screwdriver
B 6,2
A

7,8

4,4
4
3,3
0,25
C 2,54 0,5 7,62
B
art. no. no. of dim. [mm] art. no. no. of dim. [mm]
contacts A B contacts A B
CAB 3 06 03 Z 6 7.30 5.08 CAB 3 14 03 Z 14 17.46 15.24
D CAB 3 08 03 Z 8 9.84 7.62 CAB 3 16 03 Z 16 20.00 17.78
CAB 3 12 03 Z 12 14.92 12.70
surface of contact: tin-plated

Jumper links, grid spacing 2.54 mm, □ 0.635 mm

E – separable! any requested number of contact can be delivered

36 x 2,54
2,5

2,8
C

2,8
A

0,635 2,54

art. no. dim. [mm] art. no. dim. [mm]

G A C A C
LB SL 0508 ... 5.08 LB SL 1016 ... 10.16
6.1 6.1
LB SL 0762 ... 7.62 LB SL 1524 ... 15.24
please indicate: ... no. of contacts ... surface of contact
1 - 36 G = gold-plated
H Z = tin-plated

Jumper links, grid spacing 2.00 mm, □ 0.5 mm

– separable! any requested number of contact can be delivered

50 x 2,0
I
2
C

1,5

1,5

K 0,5
2

art. no. dim. [mm]

A C
LB SLY 06 ... 6 4.5
please indicate: ... no. of contacts ... surface of contact
L 1 - 50 G = gold-plated
Z = tin-plated

Technical data ➔ F 21 – 26

N F 15
 2.54 A
Jumper links / Separable jumpers
Jumper link for LED- and standard-PCBs
– in SMD-technology
– □ 0,635 mm B
– separable! any requested number of contact can be delivered

(n-1) x 2,54

2,5
1,7
C
3,9
3,9 2,54

2,54

2,8
9,5

0,635

10
(n x 2,54) D
1
art. no.
LB SL LP 039 SMD ...
please indicate: ... no. of contacts ... surface of contact E
2 - 20 G = gold-plated
Z = tin-plated

Technical data ➔ F 21 – 26
F 16 N
A 2.54
High-precision contacts, loose
Female contacts for Ø 0.5 mm
B art. no. Ø 1,53
Ø 1,4
art. no. Ø 1,8 art. no. Ø 1,8

1
Ø 1,53

3,4
2,3

3,4
0,75

3,9
0,75
3,7
4,2

0,7
6

0,75
Ø 1,3 Ø 1,37

7,4
9,5
7,4
Ø 1,53

C Ø 1,35

1706 G Ø 0,5 PEK G Ø 0,5 PK 1 ... Ø 0,5

art. no. Ø 1,8 0,7 art. no. Ø 1,8 art. no. Ø 1,8

0,75 Ø 1,5

4,1
4,95
Ø 1,37

0,75
4,4
4
4,4

Ø 1,53
4

Ø 1,32

0,7
Ø 1,53
Ø 1,37

0,7
Ø 1,37

0,75

11,4
10,4

2,6
13
1831 Z WWPS 1 G SK 06 ...
E
Ø 0,5 0,635 Ø 0,5

art. no. Ø 1,8 art. no. Ø 1,4 art. no. Ø 1,83

Ø 1,53
4,1
4,9

3,9

3,8
Ø 1,37

3,1
0,8
6,7
Ø 1,31 Ø 1,53
0,7
2,55

0,8

0,72
14,2
17,9

5,9
Ø 1,5
8,9

F 0,635 Ø 1,34

SK 13 X 2 G Ø 0,5 TF G Ø 0,5 SK 19 ... Ø 0,76

art. no. Ø 1,8 art. no. Ø 1,7 art. no. Ø 1,83

G Ø 1,39 Ø 1,39

2,2
3,4

2,73
3,9

Ø 1,53 Ø 1,54

0,54
0,78

3,9
Ø 1,34
0,75

Ø 1,37
0,75
3,4

0,8
8,5
3,83

1,1

H SIL 1 ... Ø 1,35 SK 17 ... Ø 0,5 SK 18 ... Ø 0,76

please indicate: ... surface of contact

G = gold-plated
Z = tin-plated
contact spring: gold-plated
I
Female contact for 0.64 mm □ and Ø 0.80 mm
art. no. art. no. Ø 1,83 art. no. Ø 1,83
Ø 1,83
Ø 1,6 Ø 1,52
5,8
0,77

Ø 1,6
3,3
6,9

Ø 1,6
0,7
0,77

3,8
5,8

K
0,7

6,9

Ø 1,52
0,77
0,43

Ø 1,4
10

20

Ø 1,54

Ø 1,54

SKB 5 Z Ø 0,6 SKB 9 Z 0,635 SK 21 Z Ø 0,6

L contact spring: gold-plated

contact sleeve: tin-plated

Technical data ➔ F 21 – 26

N F 17
 2.54 A
High-precision contacts, loose
Female contact for 0.64 mm □ and Ø 0.80 mm
art. no. Ø 1,83 B
Ø 1,55
Ø 1,6

5,8
7,15
0,77
0,7 Ø 1,54
14,1

C
BL 18 G X 1 0,635

contact spring: gold-plated

contact sleeve: gold-plated

Contacts with solder head D

art. no. Ø 0,95
Ø 1,8 art. no. Ø 1,8
0,85 art. no. Ø 1,35

Ø1

2,54
3,15

3,6
3,8
5,1
1,7

Ø 1,83

6,8
Ø 1,53 Ø 1,53

3,4
E

10,2
10,5
12,5

Ø 1,35

1,28
4
4

Ø 0,45 Ø 0,45
PK 4 Z Ø 1,53 SK 02 ... Ø 1,35 SK 03 ... Ø 1,35
Ø 0,5

art. no. Ø 1,83

art. no. 0,9
Ø 0,95
F
2,5

4
Ø 1,8
8,1
4

Ø 1,51
Ø 1, 4 Ø 1,33
10,6

21,1

Ø 1,53
13,08

G
3,3

Ø 0,5
SK 04 Z Ø 1,35 SK 08 G 0,635

please indicate: ... surface of contact

G = gold-plated
Z = tin-plated
H
Pin contacts
art. no. Ø 0,47 art. no. Ø 0,51
art. no. Ø 0,47
4,2
4,2

4,3

Ø 1,82 Ø 1,83

I
3,1

Ø 1,8
4,7

Ø 1,53
12,1

Ø 1,53
3,4

Ø 1,35
21,9

Ø 1,4
1,3

Ø 1,35
Ø 1,53
Ø 1,35
6,5
13,2
4

0,635
SK 05 ... Ø 0,47 SK 11 ... SK 14 X 2 ... Ø 0,47

art. no. Ø 0,8

art. no. Ø 0,5
art. no. Ø 0,5 K
Ø 1,7
4,2

3,8

Ø 1,7 Ø 1,7
7,2

0,7
8,05
8,45

11,47

Ø 1,54
L
0,7
3
0,7
3

Ø 0,5 Ø 1,54

SK 40 G Ø 0,6 SK 41 ... Ø 1,54 SK 42 ... Ø 0,5

please indicate: ... surface of contact

G = gold-plated
Z = tin-plated
M

Technical data ➔ F 21 – 26
F 18 N
A
Connector-sleeves
For 0.4 mm with BeCu spring 3 µm Ni, at least 0.1 µm Au
B art. no. Ø 1,45

0,4

3,25
3,6
C
SB 1 Ø 0,98

For 0.4 mm with bronze spring, teflon insulated

art. no. Ø 3,2

6
7,5
1,5
14,3
Ø 1,9
Ø 2,4

E SB 2 Ø 0,5

For 0.8 mm, slotted

art. no. Ø 1,7

F 4,5

4
9
1,5

Ø 1,3

G SB 3 Ø 0,8

For 1 mm, slotted

art. no. Ø3

H
0,8

6
7
11,5
1,5

Ø 1,3

Ø2

I SB 4 Ø1
art. no.
6
7
11,5

K
1,5

Ø 1,3

Ø2
SB 5 Ø1
art. no. Ø3

L
6
0,5
7
16,5

Ø 1,3
1,5

Ø2

SB 6
M Ø1

surface of contact: gold-plated

Technical data ➔ F 21 – 26

N F 19
 A
Connector-sleeves
For 1 mm, slotted, plastic insulated
art. no. Ø4
B

6
7
11,5
C
Ø 1,3

SB 9 Ø1

For 1 mm, with BeCu spring 3 µm Ni, 1 µm Au

art. no.
D
Ø 3,1

0,8

5,5
6,4
E
SB 12 Ø 2,3

For 1 mm, slotted, plastic insulated

art. no.
F
Ø4
6
1,5
7
16,5

Ø 1,03

Ø 3,2
G
SB 16 Ø1

For 2 mm, slotted, plastic insulated

art. no.
H
Ø 3,7
6
7
11,5
1,5

Ø 1,3
I
SB 13 ... Ø1

please indicate: ... case colour

S = black
R = red
B = blue K
For 2 mm, slotted, plastic insulated, separable
art. no. 5

25,4
L
12
15
18,2
5

M
5,08
SB 15 2,54 Ø 0,97

surface of contact: gold-plated

Technical data ➔ F 21 – 26
F 20 N
A
Technical data: Sockets
DIL ... E ..., DIL ... O ..., DIL ... PEK DIL ... 06 E Z,
DIL ... M ..., DIL ... P ..., DIL ... 06 H Z
B DIL ... N ..., DIL ... Q ...,
DIL ... OR ... DIL ... U ...
contact material CuZn-alloy
surface contact / Ni+≥0.2µm Au/ Ni+4...6µm Sn Ni+≥0.2µm Au Ni+4...6µm Sn
contact sleeve
C inner contact spring material CuBe-alloy CuBe-alloy
inner contact spring surface Ni+0,25µm Au Ni+0,75µm Au Ni+0,25µm Au
plugability for circuit points 0,22x0,25mm... Ø0,4...0,56mm/ 0,22x0,25mm...
0,4x0,55mm/ 0,4x0,55mm
Ø0,4...0,56mm
insert depth 2.5...3.6mm 2.5...3.6mm
D insertion / drawing force 4 lamellas contact/ 1.8 4 lamellas contact/ 1.8 N/1.4 N
N/1.4 N
shock resistance 50 g
vibration resistance max. 15 g
volume resistance 10 mΩ
E contact resistance 4 mΩ
contact resistance after 1000 cycles 7 mΩ
capacity between two adjacent con- 0,4 pF
tacts
nominal current 1.5 A
F nominal voltage 150 V DC
test voltage 1000 V
insulating body material PPS, GF
temperature range -40°C... +200°C/ (260°C/10 s)
class of inflammability UL 94 V-0
G specific insulation resistance >1012 Ω·m

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or

N F 21 printing errors especially technical modifications due to improvements of our products cannot be excluded.
 A
Technical data: Sockets
DIL ... G ..., DILS ... PK ... DILS ... GO DILS ... LO
DIL 14 W 90
contact material CuZn-alloy CuSn alloy B
surface contact / Ni+4...6µm Sn Ni+≥0.2µm Au
contact sleeve
inner contact spring material CuBe-alloy
inner contact spring surface Ni+0,75µm Au
plugability for circuit points 0,22x0,25mm... C
0,4x0,55mm/
Ø0,4...0,56mm
insert depth 2.5...3.6mm
insertion / drawing force 4 lamellas contact/ 1.8
N/1.4 N
D
shock resistance 50 g
vibration resistance max. 15 g
volume resistance 10 mΩ
contact resistance 4 mΩ
contact resistance after 1000 cycles 7 mΩ E
capacity between two adjacent con- 0,4 pF
tacts
nominal current 1.5 A
nominal voltage 150 V DC
test voltage 1000 V F
insulating body material PPS, GF PA 4.6. GF
temperature range -40°C... +200°C/ (260°C/10 s) -40°C... +163°C/
(260°C/10 s)
class of inflammability UL 94 V-0
specific insulation resistance >1012 Ω·m
G

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or
printing errors especially technical modifications due to improvements of our products cannot be exclu-
ded.
F 22 N
A
Technical data: Sockets
DIL ... SMD M, MIC ... PLCC ..., PLCC ... SMD PF ..., PQ 18 ...
DIL...SMD SK5
B contact material CuZn-alloy CuSn alloy CuZn-alloy
surface contact / Ni+≥0.2µm Au/ Ni Ni+2...4µm Sn Ni+≥0.2µm Au/ Ni
contact sleeve +4...6µm Sn +4...6µm Sn
inner contact spring material CuBe-alloy CuBe-alloy
inner contact spring surface Ni+0,25µm Au Ni+0,75µm Au
C plugability for circuit points 0,22x0,25mm... 0,22x0,25mm...
0,4x0,55mm/ 0,4x0,55mm/
Ø0,4...0,56mm Ø0,4...0,56mm
insert depth 2.5...3.6mm 2.5...3.6mm
insertion / drawing force 4 lamellas contact/ 1.8 4 lamellas contact/ 1.8
D N/1.4 N N/1.4 N
shock resistance 50 g 50 g
vibration resistance max. 15 g 15 g
volume resistance 10 mΩ >30 mΩ 10 mΩ
contact resistance 4 mΩ
E contact resistance after 1000 cycles 7 mΩ
capacity between two adjacent con- 0,4 pF 0,4 pF
tacts
nominal current 1.5 A 1A 1.5 A
nominal voltage 150 V DC 60 V DC

F test voltage 1000 V 500 V

insulating body material PPS, GF polyacetal/ non-con- PPS, GF PA 4.6. GF
ductive
temperature range -40°C... +200°C/ -40°C... +105°C/ -40°C... +163°C/
(260°C/10 s) (260°C/10 s) (260°C/10 s)
class of inflammability UL 94 V-0 UL 94 V-0 (at thickness UL 94 V-0
G ≥3mm), UL 94 V-1
specific insulation resistance >1012 Ω·m >108 Ω·m >107 Ω·m
TF 3 2 (TO 3) QS 25 GS LB ... G CB ...
contact material CuSn-alloy, CuSn 6; Ni CuSn alloy CuZn-alloy
1-2µm, Au 0.2µm
H surface contact / Ni+3µm Ag Ni+≥0.2µm Au Ni+≥0.2µm Au/ Ni
contact sleeve +4...6µm Sn
volume resistance 10 mΩ
contact resistance <10 mΩ
contact resistance after 1000 cycles 7 mΩ
I capacity between two adjacent con- 1 pF
tacts
nominal current 2.5 A
nominal voltage 125 V DC
test voltage 1650 V 500 V
K insulating body material stanyl PA 4.6 PA, GF
temperature range -65°C ... +290°C -40°C ... +180°C
class of inflammability UL 94 V-1 UL 94 V-0
specific insulation resistance >107 Ω·m
current rating 15 A max.
L

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or

N F 23 printing errors especially technical modifications due to improvements of our products cannot be excluded.
 A
Technical data: Sockets
LEB ... G PSB 03 G CAB 3 ... 03 Z LB SL ..., LB SL LP ...
contact material
surface contact /
CuZn-alloy
Ni+0.15µm Au
phosphor bronze
Ni+≥0.2µm Au
brass
Ni+4...6µm Sn
CuSn alloy
Ni+4...6µm Sn/ Ni
B
contact sleeve +≥0.2µm Au
volume resistance 5 mΩ
nominal current 3A 1.5 A 3A
nominal voltage 150 V DC 125 V AC 100 V DC 250 V DC
test voltage 1000 V 1000 V 2000 V
C
insulating body material thermoplastic polyester PA 6. GF PPS, GF PA 4.6. GF
temperature range -55°C... +125°C -40°C... +200°C/ -40°C... +163°C/
(260°C/10 s) (260°C/10 s)
class of inflammability UL 94 V-0 UL 94 V-0
specific insulation resistance >1012 Ω·m >107 Ω·m
D
LB SLY 06 ... 1706 G, PEK G, PK 1 ..., SK 19 ... 1831 Z, SIL 1 ...,
WWPS 1 G SK 06 ...,
SK 13 X 2 G
contact material CuSn alloy CuZn-alloy
surface contact / Ni+4...6µm Sn/ Ni Ni+≥0.2µm Au Ni+≥0.2µm Au/ Ni+4...6µm Sn E
contact sleeve +≥0.2µm Au
inner contact spring material CuBe-alloy
inner contact spring surface Ni+0,75µm Au Ni+0,25µm Au Ni+0,75µm Au
insert depth 2.5...3.6mm
insertion / drawing force 4 lamellas contact/ 1.8 N/1.4 N F
volume resistance 5 mΩ
nominal current 3A 1.5 A
nominal voltage 100 V DC 60 V DC
test voltage 500 V 1000 V
insulating body material PA 4.6. GF G
temperature range -40°C... +163°C/
(260°C/10 s)
class of inflammability UL 94 V-0
specific insulation resistance >107 Ω·m
H

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or
printing errors especially technical modifications due to improvements of our products cannot be exclu-
ded.
F 24 N
A
Technical data: Sockets
TF ..., TF G SK 17 ... SK 18 ... SKB 5 Z, SKB 9 Z

B contact material
surface contact / Ni+≥0.2µm Au
CuZn-alloy
Ni+4...6µm Sn
contact sleeve
inner contact spring material CuBe-alloy
inner contact spring surface Ni+0,75µm Au Ni+0,25µm Au Ni+0,75µm Au
plugability for circuit points Ø0,4...0,56mm/ □0,22x0,25mm... Ø0,4...0,56mm/
C 0,22x0,25mm... □0,4x0,55mm/ 0,22x0,25mm...
0,4x0,55mm Ø0,4...0,56mm 0,4x0,55mm
insert depth 2.5...3.6mm 2.5...6mm
insertion / drawing force 4 lamellas contact/ 1.8 1.8 N/1.4 N 6 lamella contacts/
N/1.4 N 1.3N/0.3N
D shock resistance 50 g
vibration resistance max. 15 g
volume resistance 10 mΩ
contact resistance 4 mΩ
contact resistance after 1000 cycles 7 mΩ
E nominal current 1.5 A 3A
nominal voltage 100 V DC 60 V DC 150 V DC
test voltage 1000 V
insulating body material PTFE
temperature range -200°C ... +260°C
F class of inflammability UL 94 V-0
specific insulation resistance >1014 Ω·m
SK 21 Z BL 18 G X 1 PK 4 Z, SK 02 ..., SB 1
SK 03 ..., SK 04 Z,
SK 05 ..., SK 08 G,
G SK 14 X 2 ...,
SK 40 G, SK 41 ...,
SK 42 ...
contact material CuZn-alloy
surface contact / Ni+4...6µm Sn Ni+≥0.2µm Au Ni+≥0.2µm Au/ Ni Ni+≥0,1µm Au
contact sleeve +4...6µm Sn
H inner contact spring material CuBe-alloy CuBe-alloy
inner contact spring surface Ni+0,75µm Au Ni+≥0,1µm Au
plugability for circuit points □0,55...0,65mm/ Ø0,65...0,85mm Ø0,35...0,5 mm
insert depth 2.5...3.6mm 2.5...6mm 1.5...3mm
insertion / drawing force 1.3N/0.3N
I nominal current 3A 1.5 A 2A
nominal voltage 150 V DC 60 V DC
test voltage 1500 V 1000 V

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or

N F 25 printing errors especially technical modifications due to improvements of our products cannot be excluded.
 A
Technical data: Sockets
SB 2 SB 3 SB 4, SB 5, SB 6 SB 9
contact material
surface contact / Ni+≥0.2µm Au
CuZn-alloy
Ni+0.25µm Au
B
contact sleeve
inner contact spring material CuBe-alloy
inner contact spring surface Ni+0,75µm Au
plugability for circuit points Ø0,4...0,56mm/ Ø0,8mm Ø1mm
0,22x0,25mm... C
0,4x0,55mm
insert depth 2.8...3.8mm 4mm 6mm
nominal current 2A 3A
nominal current 70°C 1A 2A
insulating body material PTFE (teflon) PA 6.6 D
dielectric strength ≤500 V ≤500 V
SB 12 SB 16 SB 13 SB 15
contact material CuZn-alloy
surface contact / Ni+0.25µm Au
contact sleeve E
inner contact spring material CuBe-alloy
inner contact spring surface Ni+1µm Au
plugability for circuit points Ø1mm Ø2mm
insert depth 3.8...5.5mm 2...6mm 6mm 12mm
volume resistance ≤30 mΩ F
nominal current 4A 3A
nominal current 70°C 2A
insulating body material PBT, GF polyolefin PA 4.6. GF
class of inflammability UL 94 V-0 UL 94 V-0
dielectric strength ≤500 V G

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or
printing errors especially technical modifications due to improvements of our products cannot be exclu-
ded.
F 26 N
 Male and female headers in SMD version
Male and female headers for solder
technology (THT)
Male and female header in press-in mounting
Multipoint connector

Male and female headers in SMD version Male and female headers for solder technology (THT)
• male header, one and two rows with pick and place pad, • male header, one and two rows, straight and angled
horizontal and vertical version version with square and precision contacts
• female header, one and two rows with pick and place • shrouded-header with second insulating body
pad, horizontal and vertical version • female header, one and two rows, straight and angled
• grid spacing: 2,54 mm, 2,00 mm and 1,27 mm version with stamped contacts or precision contacts
• optional selectable type of packaging: bar magazine • through-hole female headers, one and two rows
and tape and reel • grid spacing 2,54 mm, 2,0 mm and 1,27 mm

Male and female header in press-in mounting Multipoint connector

• male header, one and two rows, straight version • direct multipoint connector for additional circuit board
• female header, one and two rows, straight version with a thickness of 0,7 to 0,9 mm
• shrouded male header, two rows, straight version • direct multipoint connector for a circuit board thickness
of 1,6 mm
 2.54 A
Male headers
Präzisionskontakte, solder and plug pins Ø 0.5 mm
– also available as single contact, SK ... ➔ F 18
– version: B
MK 05 / MK 205: contact pin on both sides
MK 04 / MK 204: solder-cup
MK 03 / MK 203: with solder head
MK 02 / MK 202: with solder fork
art. no. Ø 0,5 art. no. 2,54
C

4,2
4,7
Ø 0,5

4,2
Ø 1,8

8,1
5

8,1
12,1

2,5
3,3

12,1
2,5

Ø 1,35
Ø 1,35 D
MK 05 ... Ø 0,5
MK 205 ... Ø 0,5

art. no. Ø 0,9 art. no. 2,54

Ø 0,9
3,2

3,2
4

4
Ø 1,8
Ø 1,8

2,5
10,6

10,6
3,3

3,3
2,5
5

Ø 1,35
MK 04 ... Ø 0,5 MK 204 ...
F
Ø 0,5

art. no. Ø 1,35 art. no. 2,54

0,5

0,5
1,8

2,5 2,8
1,8
3,6

Ø1 Ø1
Ø 1,8

6,7
10,2

10,2
3,3

5
G
2,5

Ø 1,35

Ø 0,5
MK 03 ... Ø 0,5
MK 203 ...
art. no. 2,5
Ø 1,8 art. no. 2,54
0,85 0,85

H
2,5
3,2

2,5
2,8
6,6

6,6
2,5
10,6

3,4
3,3

10, 6

Ø 1,35

MK 02 ...
Ø 0,45
MK 202 ...
Ø 0,45
I
please indicate: ... no. of contacts ... surface of contact
one row 1 - 50 G = gold-plated
two rows 2 - 100 Z = tin-plated

Technical data ➔ G 101 – 107

G2 N
A 2.54
Male headers
Precision contacts, Wire Wrap pin □ 0.635 mm
– version:
B MK 10 / MK 210: with solder-cup
MK 08 / MK 208: with solder fork
art. no. Ø 0,9 art. no. 2,54
Ø 0,9

3,2

3,2
4
Ø 1,8 Ø 1,8

8,1
C

8,1
5

3,3
21,1
2,5

21,1
Ø1,35
Ø 1,35

2,5
0,6
0,635

MK 10 ... MK 210 ...

D art. no.
2,4
0,9 art. no. 2,54

Ø 1,8 0,9
4

2,4
3,2
Ø 1,8
8,1

8,1
3,3

2,5 5
21,1

21,1
Ø 1,3 Ø 1,35

E
Ø 1,3

2,5
0,635 0,635

MK 08 ... MK 208 ...

please indicate: ... no. of contacts ... surface of contact
one row 1 - 50 G = gold-plated
F two rows 2 - 100 Z = tin-plated

Technical data ➔ G 101 – 107

N G3
 2.54 A
Male headers
Precision contacts, solder and plug pins, Ø 0.5 mm
– rectangular PCB connection
art. no. art. no.
B
Ø 0,5 2,54
Ø 1,35 Ø 0,5

4
2,54 Ø1,34

Ø 0,5
3,9
3,4

3,3

Ø 0,5

6,6
6,6
Ø1,83
C

2,54
Ø 0,76
Ø 0,76

2,9 2,9
MK 51 ... 4,7 MK 251 ... 7,2
art. no.

D
2,8

Ø 0,5
Ø 1,35
4,5

2,54
3,3

6,6
Ø 0,5

Ø 1,83

MK 15 ... 4,3 E
please indicate: ... no. of contacts ... surface of contact
one row 1 - 50 G = gold-plated
two rows 2 - 100 Z = tin-plated

– parallel PCB connection

F
2,54
4,2

Ø 0,47

4,2
Ø 0,5

Ø 1,8
X

B
Ø 1,8

X
A

A
G

2,5
3,3

2, 5

3,1 Ø 1,35
Ø 0,47
Ø 0,5

art. no. dim. [mm] art. no. dim. [mm]

A X A B X
MK 14 X 1 ... G 13.4 2.7 MK 214 X 1 ... G 13.4 1.9 2.7
H
MK 14 X 2 ... G 15.4 4.7 MK 214 X 2 ... G 15.4 3.9 4.7
MK 14 X 3 ... 22.2 11.7 MK 214 X 3 ... 22.2 10.9 11.7
please indicate: ... no. of contacts ... surface of contact
one row 1 - 50
two rows 2 - 100
G = gold-plated
Z = tin-plated
I

Technical data ➔ G 101 – 107

G4 N
A 2.54
Male headers
Precision contacts, low profile
– also available as single contact, SK ... ➔ F 18
B art. no. Ø 0,8 art. no. 2,54
0,8

1,27

4,2

4,2
8,45

8,45

1,27
C

3
Ø 0,6 0,6
MK LP 40 ... 2,5 MK LP 240 ... 5
art. no. art. no. 2,54
0,5
D 0,5

3,8
3,8

8,05

1,27
8,05

1,27

3
3

0,5

E MK LP 41 ... 2,5 MK LP 241 ...

0,5
5
art. no. 0,5 art. no. 2,54
0,5
7,2

7,2
11,45

11,45
F

1,27
1,27

3
0,5
0,5
MK LP 42 ... 2,5 MK LP 242 ... 5
art. no. 3,8
G
1,27

3,5
Ø 0,5
3

H Ø 0,5
MK LP 43 ... 2,5

please indicate: ... no. of contacts ... surface of contact

one row 1 - 50 G = gold-plated
two rows 4 - 100 Z = tin-plated
I

Technical data ➔ G 101 – 107

N G5
 2.54 A
Male headers
Precision contacts, low profile
– one row
art. no.
B
0,8
2,54

0,5

4,2
1,5 2,54

9,2
1,6

1,9

2,5
C
SL 7 ... 0,6

art. no. 2,54 0,5

3,8
2,54

8,5
1,4

1,7

2,5
SL 8 ... 0,5 E
art. no. 2,54 0,5

7,3
2,54
F
12,8
2,5

2,5
2,2

1,25
2,7

SL 9 ... 0,5

please indicate: ... no. of contacts ... surface of contact

one row 1 - 20 G = gold-plated G
Z = tin-plated

Technical data ➔ G 101 – 107

G6 N
A 2.54
Male headers
– every pin length is available on request
– one row, □ 0.635 mm
B (n - 1) x 2,54
2,54

C
C n x 2,54

2,8

2,5
B
0,635

D art. no.
A
dim. [mm]
B C S
art. no.
A
dim. [mm]
B C S
SL 11 097... 9.7 3.9 SL 1 025 ... 11.2 2.6 5.8 4
4
SL 11 112 ... 11.2 5.4 SL 1 053 ... 13.9 5.3
SL 11 124 ... 12.4 6.6 SL 1 078 ... 16.4 7.8 5
E SL 11 139 ... 13.9 8.1
5
SL 1 104 ... 19.0 10.4
SL 11 164 ... 16.4 10.6 SL 1 128 ... 21.4 5.8 12.8
3.0
SL 11 190 ... 19.0 13.2 SL 1 154 ... 24.0 15.4
6
SL 11 214 ... 21.4 15.6 SL 1 179 ... 26.5 17.9
SL 11 240 ... 24.0 18.2 SL 1 230 ... 31.6 23.0
F SL 11 265 ... 26.5 20.7
6

SL 11 316 ... 31.6 25.8

please indicate: ... no. of contacts ... surface of contact
one row 1 - 36 S = selective gold-plated
G = gold-plated
G Z = tin-plated

Technical data ➔ G 101 – 107

N G7
 2.54 A
Male headers
– every pin length is available on request
– two rows, □ 0.635 mm
(n/2-1) x 2,54
B
2,54 2,54

n/2 x 2,54

C
C

5
2,8
B
0,635
art. no. dim. [mm] art. no. dim. [mm]
A B C S A B C S D
SL 22 097 ... 9.7 3.9 SL 2 025 ... 11.2 2.6 5.8 4
4
SL 22 112 ... 11.2 5.4 SL 2 053 ... 13.9 5.3
SL 22 124 ... 12.4 6.6 SL 2 078 ... 16.4 7.8 5
SL 22 139 ... 13.9 8.1 SL 2 104 ... 19.0 10.4
SL 22 164 ... 16.4 10.6
5
SL 2 128 ... 21.4 5.8 12.8 E
3.0
SL 22 190 ... 19.0 13.2 SL 2 154 ... 24.0 15.4
6
SL 22 214 ... 21.4 15.6 SL 2 179 ... 26.5 17.9
SL 22 240 ... 24.0 18.2 SL 2 230 ... 31.6 23.0
6
SL 22 265 ... 26.5 20.7 F
SL 22 316 ... 31.6 25.8
please indicate: ... no. of contacts ... surface of contact
two rows 2 - 72 S = selective gold-plated
G = gold-plated
Z = tin-plated
G

Technical data ➔ G 101 – 107

G8 N
A 2.54
Male headers
Through-Hole-Reflow (THR) soldering technology
– every pin length is available upon request
B
– one row, □ 0.635 mm

(n-1) x 2,54

C
S

C
n x 2,54

2,8

2,5
B
2,54 0,635

D art. no.
A
dim. [mm]
B C S
art. no.
A
dim. [mm]
B C S
SL 20 THR 097 ... 9.7 4.9 SL 20 THR 139 ... 13.9 9.1
4 2 5
SL 20 THR 112 ... 11.2 2 6.4 SL 20 THR 164 ... 16.4 11.6
SL 20 THR 124 ... 12.4 7.6 5
E please indicate: ... no. of contacts ... surface of contact
one row 1 - 36 S = selective gold-plated
G = gold-plated
Z = tin-plated

– two rows, □ 0.635 mm

F (n/2-1) x 2,54

n/2 x 2,54
S

C
A

5
G
2,8
B

2,54 0,635

art. no. dim. [mm] art. no. dim. [mm]

A B C S A B C S
H SL 21 THR 097 ... 9.7 4.9
4
SL 21 THR 139 ... 13.9
2
9.1
5
SL 21 THR 112 ... 11.2 2 6.4 SL 21 THR 164 ... 16.4 11.6
SL 21 THR 124 ... 12.4 7.6 5
please indicate: ... no. of contacts ... surface of contact
two rows 2 - 72 S = selective gold-plated
I G = gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

N G9
 2.54 A
Male headers
"Dimensions A + B" changeable
– separable! any requested number of contact can be delivered
– any pin length is available upon request B
– one row, □ 0.635 mm
– the surface of dimension "C" of following articles is selective gold-plated: SLK 3 025 ... S, SL 3 025 ... S
A
S
B n - 1 x 2,54
2,54
C
n x 2,54

1,5

2,8

2,5
D
C

0,635

art. no. dim. [mm] art. no. dim. [mm]

A B C S A B C S
SL 3 025 ... 4.5 3.0 SL 3 152 ... 16.7 15.2
SL 3 053 ... 6.9 5.4 5 SL 3 182 ... 19.7 18.2 5.8 6 E
SL 3 080 ... 9.5 8.0 5.8 SL 3 207 ... 22.2 20.7
SL 3 101 ... 11.6 10.1 SLK 3 025 ... 4.5 3.0 3.0 4
6
SL 3 131 ... 14.6 13.1
please indicate: ... no. of contacts ... surface of contact
one row 1 - 36 S = selective gold-plated F
G = gold-plated
Z = tin-plated

– two rows, □ 0,635 mm

– the surface of dimension "C" of following articles is selective gold-plated: SLK 4 025 ... S, SL 4 025 ... S
A n/2 - 1 x 2,54
G
S 2,54
n/2 x 2,54
2,54

B
1,5

5
H
2,8
C

2,54 0,635

art. no. dim. [mm] art. no. dim. [mm]

A B C S A B C S
SL 4 025 ... 4.5 3.0 5 SL 4 152 ... 16.7 15.2 5.8 6
I
5.8
SL 4 101 ... 11.6 10.1 6 SLK 4 025 ... 4.5 3.0 3.0 4
please indicate: ... no. of contacts ... surface of contact
two rows 2 - 72 S = selective gold-plated
G = gold-plated
Z = tin-plated K

Technical data ➔ G 101 – 107

G 10 N
A 2.54
Male headers
Insertion side "dimension C" changeable
– separable! any requested number of contact can be delivered
B – any pin length is available on request

– one row, □ 0.635 mm

3 2,54

1,5
n x 2,54

2,8

2,5
C
D S
0,635 0,635
art. no. dim. [mm] art. no. dim. [mm]
C S C S
SL 18 042 ... 4.2 SL 18 108 ... 10.8 5
5
SL 18 082 ... 8.2 SL 18 132 ... 13.2 6
E please indicate: ... no. of contacts ... surface of contact
one row 1 - 36 S = selective gold-plated
G = gold-plated
Z = tin-plated

– two rows, □ 0.635 mm

F 2,54
3
2,54

n/2 x 2,54

2,8

G
1,5

5
C
S

2,54 0,635

art. no. dim. [mm] art. no. dim. [mm]

H C S C S
SL 19 082 ... 8.2 SL 19 132 ... 13.2 6
5
SL 19 108 ... 10.8
please indicate: ... no. of contacts ... surface of contact
two rows 2 - 72 S = selective gold-plated
I G = gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

N G 11
 2.54 A
Male headers
Low profile, straight
– any pin length is available on request
B
– one row, □ 0.635 mm
0,635

C
C

2,5
1,7

1,4
B
n x 2,54

2,54

art. no. dim. [mm] art. no. dim. [mm] D

A B C S A B C S
SL LP 1 082 ... 8.2 3.5 3 SL LP 1 139 ... 13.9 9.2
SL LP 1 097 ... 9.7 3 5.0 SL LP 1 164 ... 16.4 3 11.7 5
4
SL LP 1 112 ... 11.2 6.5 SL LP 1 190 ... 19.0 14.3
please indicate: ... no. of contacts ... surface of contact E
one row 1 - 36 S = selective gold-plated
G = gold-plated
Z = tin-plated

– two rows, □ 0.635 mm

2,54 0,635
F
S

2,54

5
A

G
1,7

1,4
B

n/2 x 2,54
2,54

art. no. dim. [mm] art. no. dim. [mm]

A B C S A B C S
SL LP 2 082 ... 8.2 3.5 3 SL LP 2 139 ... 13.9 9.2
H
SL LP 2 097 ... 9.7 3 5.0 SL LP 2 164 ... 16.4 3 11.7 5
4
SL LP 2 112 ... 11.2 6.5 SL LP 2 190 ... 19.0 14.3
please indicate: ... no. of contacts ... surface of contact
two rows 2 - 72 S = selective gold-plated
G = gold-plated
I
Z = tin-plated

Technical data ➔ G 101 – 107

G 12 N
A 2.54
Male headers
Low profile, angled
– any pin length is available on request
B
– one row, □ 0.635 mm
A 2,54
B

1,7
C

1,4

2,5
1,5
n x 2,54

S
0,635 0,635 2,54

art. no. dim. [mm] art. no. dim. [mm]

D A B C S A B C S
SL LP 3 041 ... 4.5 3 4.1 4 SL LP 3 069 ... 4.5 3 6.9 5
please indicate: ... no. of contacts ... surface of contact
one row 1 - 36 S = selective gold-plated
G = gold-plated
E Z = tin-plated

– two rows, □ 0.635 mm

A 0,635

F
1,7

1,4
2,54

2,54

5
1,5
C

n/2 x 2,54
G 2,54 0,635 2,54

art. no. dim. [mm] art. no. dim. [mm]

A B C A B C S
SL LP 4 041 ... G SL LP 4 069 ... 4.5 3 6.9 5
4.5 3 4.1
SL LP 4 041 ... Z
H
please indicate: ... no. of contacts ... surface of contact
two rows 2 - 72 S = selective gold-plated
G = gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

N G 13
 2.54 A
Male headers
Sandwich-design
– "S" selective gold-plated up to 33 mm pin length
– for interconnections of stacked PCBs B
– within the total length of the pin the insulator position can be changed as required ... Design specification-sheet
– separable! any requested number of contact can be delivered

– one row, □ 0.635 mm

(n - 1) x 2,54
2,54
C

2,5
2,8
n x 2,54

L
A
D

2,8
3,3

0,635

art. no. dim. [mm] art. no. dim. [mm] art. no. dim. [mm]
A L S A L S A L
SL 5 071 ... 7.1 16.4 SL 5 156 Z 15.6 24.9 SL 5 285 ... 28.5 37.8 E
5
SL 5 097 ... 9.7 19.0 SL 5 172 ... 17.2 26.5 SL 5 315 ... 31.5 40.8
SL 5 121 ... 12.1 21.4 SL 5 197 ... 19.7 29.0 6 SL 5 360 ... 36.0 45.3
SL 5 147 ... 14.7 24.0 6 SL 5 223 ... 22.3 31.6 SL 5 415 ... 41.5 50.8
SL 5 156 G 15.6 24.9 SL 5 237 ... 23.7 33.0 SL 5 525 ... 52.2 61.5
F
please indicate: ... no. of contacts ... surface of contact
one row 1 - 36 S = selective gold-plated
G = gold-plated
Z = tin-plated

– two rows, □ 0,635 mm G

2,54 (n/2 - 1) x 2,54
2,54
S

2,8

n/2 x 2,54

H
L

5
A

2,8
3,3

0,635

art. no.
A
dim. [mm]
L S
art. no.
A
dim. [mm]
L S
art. no. dim. [mm]
A L
I
SL 6 071 ... 7.1 16.4 SL 6 156 Z 15.6 24.9 SL 6 285 ... 28.5 37.8
5
SL 6 097 ... 9.7 19.0 SL 6 172 ... 17.2 26.5 SL 6 315 ... 31.5 40.8
SL 6 121 ... 12.1 21.4 SL 6 197 ... 19.7 29.0 6 SL 6 360 ... 36.0 45.3
SL 6 147 ... 14.7 24.0 6 SL 6 223 ... 22.3 31.6 SL 6 415 ... 41.5 50.8 K
SL 6 156 G 15.6 24.9 SL 6 237 ... 23.7 33.0 SL 6 525 ... 52.2 61.5
please indicate: ... no. of contacts ... surface of contact
two rows 2 - 72 S = selective gold-plated
G = gold-plated
Z = tin-plated
L

Technical data ➔ G 101 – 107

G 14 N
A 2.54
Male headers
Sandwich-design
– "S" selective gold-plated up to 33 mm pin length
B – for interconnections of stacked PCBs
– for plugging the the female headers BL 11 (SL 13 ...) ➔ G 67 and BL 12 (SL 14 ...) ➔ G 67
– suitable for PCB thicknesses between 1.5 mm and 33 mm
– separable! any requested number of contact can be delivered

– one row □ 0.635 mm

C (n - 1) x 2,54
2,54

11

2,5
n x 2,54

2,8
D
L
A

2,8
3,3

0,635
art. no. dim. [mm] art. no. dim. [mm]
E SL 13 071 ...
A L S
SL 13 235 ...
A L
7.1 21.4 23.5 37.8
SL 13 097 ... 9.7 24.0 SL 13 265 ... 26.5 40.8
SL 13 122 ... 12.2 26.5 6 SL 13 310 ... 31.0 45.3
SL 13 147 ... 14.7 29.0 SL 13 365 ... 36.5 50.8
F SL 13 187 ... 18.7 33.0
please indicate: ... no. of contacts ... surface of contact
one row 1 - 36 S = selective gold-plated
G = gold-plated
Z = tin-plated
G – two rows, □ 0.635 mm

2,54 (n/2 - 1) x 2,54

2,54
S

11

n/2 x 2,54
H
2,8
L

5
A

2,8
3,3

0,635

I art. no. dim. [mm] art. no. dim. [mm]

A L S A L
SL 14 071 ... 7.1 21.4 SL 14 235 ... 23.5 37.8
SL 14 097 ... 9.7 24.0 SL 14 265 ... 26.5 40.8
SL 14 122 ... 12.2 26.5 6 SL 14 310 ... 31.0 45.3
K SL 14 147 ... 14.7 29.0 SL 14 365 ... 36.5 50.8
SL 14 187 ... 18.7 33.0
please indicate: ... no. of contacts ... surface of contact
two rows 2 - 72 S = selective gold-plated
G = gold-plated
L Z = tin-plated

Technical data ➔ G 101 – 107

N G 15
 A
Design specification for connectors, grid spacing 2.54 mm

date:
pieces per order: B
company:
name, dept.:
town:
street:
C
fax:
signature:

inquiry
D
order

surface finish
one row 1 - 36 contacts possible
selective gold-plated two rows 2 - 72 contacts possible E
gold-plated
tin-plated

number of contacts
F

dimensions:
0,635
G
L
C

2,8

A
H
L
A

B I
B

2,54 2,54
C
K
L = total contact lenght
A = distance between PCBs
B = solder side
C = insertion side L

Technical data ➔ G 101 – 107

G 16 N
A 2.54
Male headers
Shrouded male header, with coding and bolting device
– suitable for many flat cable connectors in 2.54 mm pitch
B 8,9
C

2,54

6,4
2,54

S
9,2
6,4

2,8
E
C 4,3
B

3
A
0,635

art. no. no. of con- dim. [mm]

tacts A B C D E S
D SLU 10 165 ... 13.5 16.5
5
SLU 10 191 ... 16.1 19.1
10 20.4 17.8 10.16
SLU 10 241 ... 21.1 24.1
6
SLU 10 266 ... 23.6 26.6
E SLU 16 165 ... 13.5 16.5
5
SLU 16 191 ... 16.1 19.1
16 28.0 25.4 17.78
SLU 16 241 ... 21.1 24.1
6
SLU 16 266 ... 23.6 26.6
SLU 20 165 ... 13.5 16.5
F SLU 20 191 ... 16.1 19.1
5
20 33.1 30.5 22.86
SLU 20 241 ... 21.1 24.1
6
SLU 20 266 ... 23.6 26.6
SLU 26 165 ... 13.5 16.5
5
SLU 26 191 ...
G SLU 26 241 ...
26 40.7 38.1 30.48
16.1 19.1
21.1 24.1
6
SLU 26 266 ... 23.6 26.6
SLU 40 165 ... 13.5 16.5
5
SLU 40 191 ... 16.1 19.1
40 58.5 55.9 48.26
H SLU 40 241 ... 21.1 24.1
6
SLU 40 266 ... 23.6 26.6
SLU 50 165 ... 13.5 16.5
5
SLU 50 191 ... 16.1 19.1
50 71.2 68.6 60.96
SLU 50 241 ... 21.1 24.1
I SLU 50 266 ... 23.6 26.6
6

please indicate: ... surface of contact

S = selective gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

N G 17
 2.54 A
Male headers
Three rows, □ 0.635 mm
2,54
2,54 B

7,5
2,5
C

B
1,27
0,635

art. no. dim. [mm]

A B C
SL KG 3 113 ... 11.3 5.5 D
SL KG 3 126 ... 12.6 3.3 6.8
SL KG 3 147 ... 14.7 8.9
2,54 B
0,635 2,54

C
1,27
A

2,5
F
art. no. dim. [mm]
A B C
SL KA 3 072 ... 7.2 3.4
SL KA 3 085 ... 8.5 3.3 4.7
SL KA 3 108 ... 10.8 7.0
G
please indicate: ... no. of contacts ... surface of contact
three rows 3 - 150 G = gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

G 18 N
A 2.54
Male headers
Turned precision male contacts
– Suitable for BL 22 SHK 14 02 G ➔ G 72 and BL 23 SHK 14 02 SMD G ➔ G 78
B – Signal and high-power contacts
– Contacts gold-plated
– Other number of contacts / contact surface upon request
(n/2 - 1) x 2,54
2,54

10,92

5,08
2,54
2,54 2,54

2,17
5,08 5,08
2,54 0,64 1,14 25,9

D art. no. signal contacts high-power contacts

SL 26 SHK 14 02 G 12 2
surface of contact: gold-plated

Technical data ➔ G 101 – 107

N G 19
 2.54 A
Male headers
Precision contacts, plug pins Ø 0.5 mm
art. no. Ø 0,47
n x 2,54
5,08
B

4,2
0,8

8,1

10

3,2
2,5
3,3

6
C
2,54 2,54
MK 26 SMD ... 5,5 Pin 1 2,54 Pin 1

please indicate: ... no. of contacts ... surface of contact ... packing (optional)
one row 4 - 20 G = gold-plated SM = bar magazine
Z = tin-plated B SM = pick and place pad
and bar magazine
B TR = pick and place pad
and tape and reel
D
(250pcs/reel)

... packing (option) - additions:

MK 26 SMD ... B TR: 4-12 contacts

Option for automatic assembly E

– reel diameter Ø 330 mm

5,5 7 7
8,5

17,5

17,5
13,3

Ø 0,47
2,54 5,5 10,8 10,8
G
MK 26 SMD ... SM MK 26 SMD ... B SM
12 13,8
2

H
40,4
44

4 1,5

MK 26 SMD ... B TR
I

Technical data ➔ G 101 – 107

G 20 N
A 2.54
Male headers
Precision contacts, plug pins Ø 0.5 mm
B art. no. Ø 0,47
n/2 x 2,54
0,8

4,2

3,5
8,1

10
2,5

9
C
2,54 2,54
MK 226 SMD ... 7,7 Pin 1 2,54 Pin 1

please indicate: ... no. of contacts ... surface of contact ... packing (optional)
two rows 4 - 40 G = gold-plated SM = bar magazine
Z = tin-plated B SM = pick and place pad
and bar magazine
B TR = pick and place pad
D and tape and reel
(250pcs/reel)

... packing (option) - additions:

MK 226 SMD ... SM; ... B SM: 6-40 contacts
E MK 226 SMD ... B TR: 6-24 contacts

Option for automatic assembly

– reel diameter Ø 330 mm

8,5 8,5
8,5 6
F

17,5

17,5
13,3

G Ø 0,47
2,54 7,7 13,3 13,3

MK 226 SMD ... SM MK 226 SMD ... B SM

16 13,7
2

H
40,4
44

4 1,5
I MK 226 SMD ... B TR

Technical data ➔ G 101 – 107

N G 21
 2.54 A
Male headers
Precision contacts, plug pins Ø 0.5 mm
art. no.
n x 2,54
B

Ø 0,47
0,8

3,2
2,5
3,3
1
4,2 2,2 2,54

C
2,54
4,7 Pin 1
11,8
Pin 1

MK 27 SMD ...
please indicate: ... no. of contacts ... surface of contact ... packing (optional)
one row 2 - 20 G = gold-plated SM = bar magazine
Z = tin-plated
D
... packing (option) - additions:
MK 27 SMD ... SM: 3-20 contacts

Option for automatic assembly

8,5
E

17,5
F
13,3
... SM MK 27 SMD ... SM

Technical data ➔ G 101 – 107

G 22 N
A 2.54
Male headers
□ 0.635 mm
B 2,54 0,635
2,5
2,54

C
S

6,5
2,8

3,4
C

3
n x 2,54 6,3
Pin 1 1 Pin 1
Pin 1
art. no. dim. [mm] art. no. dim. [mm] art. no. dim. [mm]
C S C S C S
SL 10 SMD 040 ... 4.0 SL 10 SMD 062 ... 6.7 SL 10 SMD 104 ... 10.8
D SL 10 SMD 052 ... 5.5
4
SL 10 SMD 078 ... 8.2
5
SL 10 SMD 130 ... 13.4
5

please indicate: ... no. of contacts ... surface of contact ... packing (optional)
one row 4 - 20 S = selective gold-plated SM = bar magazine
G = gold-plated B SM = pick and place pad
Z = tin-plated and bar magazine
E B TR = pick and place pad
and tape and reel

... packing (option) - additions:

SL 10 SMD 040 - 104 ... SM; ... B SM: 4-20 contacts
SL 10 SMD 040 - 062 ... B TR: 4-20 contacts, 250 pcs/reel
F SL 10 SMD 078 ... B TR: 4-12 contacts, 250 pcs/reel
SL 10 SMD 104 - 130 ... B TR: 4-12 contacts, 150 pcs/reel

Option for automatic assembly

– reel diameter Ø 330 mm

G
1,3

8,5 5
2,8

17,5
17,5
7,5
C

H
2,8

3,4

2,54 10,8
10,8
6,3
SL 10 SMD ... SM SL 10 SMD ... B SM

16 11,9 16 2 11,9

I
2
40,4

68,4
44

72

K 4 1,5 4 1,5

SL 10 SMD 040-062 ... 4-12 ... B TR SL 10 SMD 040-062 ... 13-20 ... B TR
16 13,5 20 18,5

L
2

2
40,4

40,4
44

44

M
4 1,5 4 1,5

SL 10 SMD 078 ... 4-12 ... B TR SL 10 SMD 104 - 130 ... 4-12 ... B TR

Technical data ➔ G 101 – 107

N G 23
 2.54 A
Male headers
□ 0.635 mm
2,54 0,635 2,54
5 2,54 B

C
S

9
3,4
2,8
C

3
8,5 1
n/2 x 2,54 Pin 1
Pin 1 Pin 1
art. no. dim. [mm] art. no. dim. [mm] art. no. dim. [mm]
C S C S C S
SL 11 SMD 040 ... 4.0 SL 11 SMD 062 ... 6.7 SL 11 SMD 104 ... 10.8
SL 11 SMD 052 ... 5.5
4
SL 11 SMD 078 ... 8.2
5
SL 11 SMD 130 ... 13.4
5 D
please indicate: ... no. of contacts ... surface of contact ... packing (optional)
two rows 4 - 40 S = selective gold-plated SM = bar magazine
G = gold-plated B SM = pick and place pad
Z = tin-plated and bar magazine
B TR = pick and place pad E
and tape and reel
(150pcs/reel)
B TR = pick and place pad
and tape and reel
(250pcs/reel)
F
... packing (option) - additions:
SL 11 SMD 040-104 ... SM; ... B SM: 6-40 contacts
SL 11 SMD 040-062 ... B TR: 26-40 contacts, 250 pcs/reel
SL 11 SMD 040-078 ... B TR: 6-24 contacts, 250 pcs/reel
SL 11 SMD 104-130 ... B TR: 6-24 contacts, 150 pcs/reel
G
Option for automatic assembly
6
1,3

8,5 5,3
17,5

17,5 H
7,5
C
2,8

3,4

2,54 8,5 13,3 13,3

... SM
... B SM SL 11 SMD ... SM SL 11 SMD ... B SM

16 13,8
16 Ø 1,5 4 11,9
I
Ø2

Ø2
40,4

68,4
44

72

K
Ø 1,5 4

SL 11 SMD 040-062 ... 6-24 ... B TR SL 11 SMD 040-062 ... 26-40 ... B TR
16 13,1 20 19,1

L
Ø2

Ø2
40,4

40,4
44

44

M
Ø 1,5 4 Ø 1,5 4

... B TR SL 11 SMD 078 ... B TR SL 11 SMD 104-130 ... 6-24 ... B TR

Technical data ➔ G 101 – 107

G 24 N
A 2.54
Male headers
□ 0.635 mm
B

0,635
n x 2,54 2,54
C

2,5

3,5
S
B 2,54 1

C S = 5 mm
2,8

art. no. dim. [mm] art. no. dim. [mm] art. no. dim. [mm]
B C S B C S B C S
SL 12 SMD 031 ... 5.2 3.1 4 SL 12 SMD 035 ... 3.2 3.5 4 SL 12 SMD 083 ... 8.3
5.2 5
SL 12 SMD 032 ... 3.2 5.8 — SL 12 SMD 058 ... 5.2 5.8 5 SL 12 SMD 109 ... 10.9
D please indicate: ... no. of contacts ... surface of contact ... packing (optional)
one row 2 - 20 S = selective gold-plated B SM = pick and place pad
G = gold-plated and bar magazine
Z = tin-plated B TR = pick and place pad
and tape and reel
E (500pcs/reel)

... packing (option) - additions:

SL 12 SMD ... B TR: 2-13 contacts

Option for automatic assembly

F – reel diameter Ø 330 mm
 0,635

7,5
5

5,5
G
3,8
2,5

C 2,8 B 21
2,54
n x 2,54 SL 12 SMD ... B SM

H 24 4,3
40,4
44

I
4 1,5
SL 12 SMD 031-109 ... B TR

Technical data ➔ G 101 – 107

N G 25
 2.54 A
Male headers
□ 0.635 mm
B

0,635
10,5 n/2 x 2,54 2,54
C

3
2,54

7,6
5
S
2,8
C
2,54 1,27
5,9

art. no. dim. [mm] art. no. dim. [mm] art. no. dim. [mm]
C C S C S
SL 17 SMD 058 ... 5.8 SL 17 SMD 083 ... 8.3 5 SL 17 SMD 109 ... 10.9 5 D
please indicate: ... no. of contacts ... surface of contact ... packing (optional)
two rows 4 - 40 G = gold-plated B SM = pick and place pad
Z = tin-plated and bar magazine
B TR = pick and place pad
and tape and reel
(300pcs/reel) E
... packing (option) - additions:
SL 17 SMD ... B TR: 6-24 contacts

Option for automatic assembly

– reel diameter Ø 330 mm F
 0,635

7,5

5
6,3

G
2,54
5

2,54 8
C 2,8
2,54 5,9 24
n/2 x 2,54 10,5
SL 17 SMD ... B SM

28 7,1
H
40,4
44

I
4 1,5

SL 17 SMD 058-109 ... B TR

Technical data ➔ G 101 – 107

G 26 N
A 2.54
Male headers
□ 0.635 mm
B

0,635
n/2 x 2,54
1,27 2,54

2,54
C 10,5 (n/2-1) x 2,54

4,6
5
2,3
C

Ø1
2,8
2,2 2,54

art. no. dim. [mm] art. no. dim. [mm] art. no. dim. [mm]
C C C
SL 28 SMD THR 058 ... 5.8 SL 28 SMD THR 083 ... 8.3 SL 28 SMD THR 109 ... 10.9
D please indicate: ... no. of contacts ... surface of contact
two rows 4 - 40 G = gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

N G 27
 2.54 A
Male headers
Low profile in SMD □ 0.635 mm
B

2,5
2,54 0,635

2,54

2,3
S

3
6,5
1,7

C
1
n x 2,54
6,1 Pin 1
Pin 1

art. no. dim. [mm] art. no. dim. [mm] art. no. dim. [mm]
C S C S C S
SL LP 5 SMD 038 ... 3.8 3 SL LP 5 SMD 051 ... 5.1 4 SL LP 5 SMD 066 ... 6.6 4
please indicate: ... no. of contacts ... surface of contact ... packing (optional)
D
one row 4 - 20 S = selective gold-plated SM = bar magazine
G = gold-plated B SM = pick and place pad
Z = tin-plated and bar magazine
B TR = pick and place pad
and tape and reel
(250pcs/reel)
E
... packing (option) - additions:
SL LP 5 SMD ... SM; ... B SM: 4-20 contacts
SL LP 5 SMD ... B TR: 4-20 contacts

Option for automatic assembly

F
– reel diameter Ø 330 mm

G
1,3

8,5 5

17,5
17,5
7,5
2,3
C

2,54
6,1 10,8 10,8
H
SL LP 5 SMD ... SM SL LP 5 SMD ... B SM

16 11,9 16 2 11,9

I
2

68,4
40,4

72
44

K
4 1,5 4 1,5

SL LP 5 SMD 038-066 ... 4-12 ... B TR SL LP 5 SMD 038-066 ... 13-20 ... B TR

Technical data ➔ G 101 – 107

G 28 N
A 2.54
Male headers
Low profile in SMD □ 0.635 mm
B 2,54 0,635 2,54
2,54

1, 7

5
9
1,4

3
2,3

Ø 1,2 (2x)
C Ø 1,2
n/2 x 2,54 1

PS 8,5 Pin 1 Pin 1

art. no. dim. [mm] art. no. dim. [mm] art. no. dim. [mm]
C S C S C S
SL LP 6 SMD 038 ... 3.8 3 SL LP 6 SMD 051 ... 5.1 4 SL LP 6 SMD 066 ... 6.6 4
D please indicate: ... no. of contacts ... surface of contact ... packing (optional)
two rows 4 - 40 S = selective gold-plated SM = bar magazine
G = gold-plated B SM = pick and place pad
Z = tin-plated and bar magazine
B TR = pick and place pad
E and tape and reel
(250pcs/reel)
... positioning (optional)
PS = locating pin (2 pcs/bar bigger than 6 contacts)

... packing (option) - additions:

F SL LP 6 SMD ... SM; ... B SM: 6-40 contacts
SL LP 6 SMD ... B TR: 6-24 contacts

Option for automatic assembly

– reel diameter Ø 330 mm

G
1,3

8,5 6 17,5
7,5
C

H
2,3

2,54 13,3
8,5

16 13,8

I
2
40,4
44

K 4 1,5

SL LP 6 SMD 038-066 ... B TR

Technical data ➔ G 101 – 107

N G 29
 2.54 A
Male headers
Low profile in SMD □ 0.635 mm

A B
1,7
S n x 2,54

1
2,54 1,3

2,5

B - 0,3
C 2,54
B
0,635 C
(n-1) x 2,54

art. no. dim. [mm]

A B C S
SL LP 7 SMD 030 ... 8.0 3.3 3.0 3
SL LP 7 SMD 040 ... 9.5 4.0 D
3.8 4
SL LP 7 SMD 055 ... 11.0 5.5
please indicate: ... no. of contacts ... surface of contact
2 - 20 S = selective gold-plated
G = gold-plated
Z = tin-plated E

Technical data ➔ G 101 – 107

G 30 N
A 2.54
Male headers
□ 0.635 mm – for interconnections of stacked PCBs
– one row, 4-20 contacts
B – within the total length of the pin the insulator can be changed according to customer's request

6,5
2,54 2,54
0,635 3,25

2,54
6
C

0,15

2,8

2,54

1
A
P

2,54
Pin 1 Pin 1
Pin 1
P
D
6,3 1,1

art. no. dim. [mm] art. no. dim. [mm] art. no. dim. [mm]
A S A S A S
SL 15 SMD 107 ... 10.7 5 SL 15 SMD 182 ... 18.2 6 SL 15 SMD 207 ... 20.7 6
please indicate: ... no. of contacts ... surface of contact
E one row 4 - 20 S = selective gold-plated
G = gold-plated
Z = tin-plated
... positioning (optional)
P = end pins straight for positioning
F – two rows, 4-40 contacts
– within the total length the insulator can be changed according to customer's request

2,54
0,635 2,54 P
2,54

1,1
2,54
G
S

n/2 x 2,54
6
0,15

2,8

2,54

Pin 1
5
A

2,54 3

1
2

H Pin 1
P
Pin 1
Pin 1
8,5 9

art. no. dim. [mm] art. no. dim. [mm] art. no. dim. [mm]
A S A S A S
SL 16 SMD 107 ... 10.7 5 SL 16 SMD 182 ... 18.2 SL 16 SMD 247 ... 24.7 6
I SL 16 SMD 157 ... 15.7 6 SL 16 SMD 207 ... 20.7
6

please indicate: ... no. of contacts ... surface of contact

two rows 4 - 40 S = selective gold-plated
G = gold-plated
Z = tin-plated
K ... positioning (optional)
P = end pins straight for positioning

Technical data ➔ G 101 – 107

N G 31
 2.54 A
Male headers
Turned precision male contacts
– suitable for BL 22 SHK 14 02 G ➔ G 72 and BL 23 SHK 14 02 SMD G ➔ G 78
– signal and high-power contacts B
– contacts gold-plated
– other number of contacts / contact surface upon request
(n/2 - 1) x 2,54
2,54

2,54
C

5,08
2,54
9,65
2,17
5,08 5,08
7,1 0,64 1,14 25,9
art. no. signal contacts high-power contacts D
SL 27 SHK 14 02 SMD G 12 2
surface of contact: gold-plated

Technical data ➔ G 101 – 107

G 32 N
A 2.54
Male headers
Male connectors in pressfit technology
– press-fit mounting without soldering, resilient press-fit area, easy insertion into the PCB
B – Pressfit bar with insulating body has to be inserted up to the PCB
– separable! any requested number of contact can be delivered
– contact material: CuSn6

– one row, 1-36 contacts

– for PCB thickness ≥1.6 mm dimension B = 3.5 mm and ≥3.0 mm dimension B = 4.5 mm
C 0,635 2,54

n x 2,54

C
(n-1) x 2,54

A
2,8

2,5
D B

2,5
art. no. dim. [mm] art. no. dim. [mm]
A B C A B C
E SLP 1 16 117 ... 11.7 5.4 SLP 1 16 144 ... 14.4 8.1
3.5 3.5
SLP 1 16 129 ... 12.9 6.6 SLP 1 16 195 Z 19.5 13.2
please indicate: ... no. of contacts ... surface of contact
one row 1 - 36 G = gold-plated
Z = tin-plated
F
– two rows, 2-72 contacts
– for PCB thickness ≥1.6 mm dimension B = 3.5 mm and ≥3.0 mm dimension B = 4.5 mm
2,54 0,635 2,54
n/2 x 2,54
G ((n/2)-1) x 2,54
C
A
2,8

2,54

5
B

H 5
art. no. dim. [mm] art. no. dim. [mm]
A B C A B C
SLP 2 16 117 ... 11.7 5.4 SLP 2 16 144 ... 14.4 8.1
3.5 3.5
SLP 2 16 129 ... 12.9 6.6 SLP 2 16 195 Z 19.5 13.2
I please indicate: ... no. of contacts ... surface of contact
two rows 2 - 72 G = gold-plated
Z = tin-plated

Hole diameter in PCB - hole structure acc. to DIN EN 60352-5

K

Technical data ➔ G 101 – 107

N G 33
 2.54 A
Male headers
Male header with shroud in pressfit technology
– suitable for lockable female multipoint connector VFL ... ➔ H 11 and can be combined with many other female multipoint connec-
tors with grid spacing 2.54 mm (e. g.: PV ..., BL ...) B
– press-fit mounting without soldering, resilient press-fit area, easy insertion into PCB
– Pressfit bar with insulating body has to be inserted up to the PCB
– contact material: CuSn6

1
4,3 C
C
0,635

6,4

9,2
6,4
9,2
D
E

B
A

D
2,54 2,54

art. no. no. of contacts dim. [mm]

A B C D E
SLUP 31 10 ... 10 20.4 17.8 10.16
SLUP 31 16 ... 16 28.0 25.4 17.78 12.6 3.5
SLUP 31 20 ... 20 33.1 30.5 22.86 E
please indicate: ... surface of contact
G = gold-plated
Z = tin-plated

Hole diameter in PCB - hole structure acc. to DIN EN 60352-5

F

Technical data ➔ G 101 – 107

G 34 N
A 2.54
Male headers
Male connectors for LED applications
– every pin length is available upon request
B – insulating body made of white plastic (nature)
– one row, □ 0.635 mm

(n-1) x 2,54
2,54

C
n x 2,54

2,8

2,5
D B 0,635

art. no. dim. [mm]

A B C S
SL 24 LED 097 ... 9.7 3.9
4
SL 24 LED 112 ...
E SL 24 LED 124 ...
11.2 3 5.4
12.4 6.6 5
please indicate: ... no. of contacts ... surface of contact
one row 1 - 36 S = selective gold-plated
G = gold-plated
Z = tin-plated
F

Technical data ➔ G 101 – 107

N G 35
 2.54 A
Male headers
Male connectors for LED applications
– every pin length is available upon request
– insulating body made of white plastic (nature) B
– one row, □ 0.635 mm

(n - 1) x 2,54
2,54
C
S

C
n x 2,54

2,8

2,5
D
B

0,635

art. no. dim. [mm]

A B C S
SL 25 LED THR 097 ... 9.7 4.9
4 E
SL 25 LED THR 112 ... 11.2 2 6.4
SL 25 LED THR 124 ... 12.4 7.6 5
please indicate: ... no. of contacts ... surface of contact
one row 1 - 36 S = selective gold-plated
G = gold-plated
Z = tin-plated
F

Technical data ➔ G 101 – 107

G 36 N
A 2.54
Male headers
Male connectors for LED applications
– insulating body made of white plastic (nature)
B – one row, □ 0.635 mm

0,635
n x 2,54 2,54
C

2,5

3,5
S
B 2,54 1

2,8

D art. no.
B
dim. [mm]
C S
SL 23 LED SMD 031 ... 3.1 4
5.2
SL 23 LED SMD 058 ... 5.8 5
please indicate: ... no. of contacts ... surface of contact ... packing (optional)
E one row 2 - 20 S = selective gold-plated
G = gold-plated
B SM = pick and place pad
and bar magazine
Z = tin-plated B TR = pick and place pad
and tape and reel
(500pcs/reel)

F ... packing (option) - additions:

SL 23 LED ... B TR: 2-13 contacts

Option for automatic assembly

G
 0,635

7,5
5

5,5
3,8
2,5

C 2,8 B 21
2,54
n x 2,54 SL 23 LED SMD ... B SM
H
24 4,3

I
40,4
44

4 1,5
K SL 23 LED SMD ... B TR

Technical data ➔ G 101 – 107

N G 37
 2.00 A
Male headers
Standard, □ 0.5 mm
– any requested number of contact is available
2
B

2
1,5

A
n x2
C

B
0,5
art. no. dim. [mm] art. no. dim. [mm]
A B C S A B C S
SLY 1 081 ... 8.1 3.6 3.0 SLY 1 104 ... 10.4 5.9
SLY 1 085 ... 8.5 3 4.0 SLY 1 139 ... 13.9
3
9.4
3.5
D
3.5
SLY 1 098 ... 9.8 5.3
2 2
S

2
4
1,5

A
B

n/2 x 2
 0,5
art. no. dim. [mm] art. no. dim. [mm]
A B C S A B C S F
SLY 2 081 ... 8.1 3.6 3.0 SLY 2 104 ... 10.4 5.9
3 3.5
SLY 2 085 ... 8.5 3 4.0 SLY 2 139 ... 13.9 9.4
3.5
SLY 2 098 ... 9.8 5.3
B 2
G
A
1,5

2
C

n x2
0,5
art. no. dim. [mm] art. no. dim. [mm] H
A B C S A B C
SLY 3 035 ... 3.5 SLY 3 082 ... G
1.5 2.8 3.5 1.5 2.8 8.2
SLY 3 041 ... 4.1 SLY 3 082 ... Z
B 2

I
2
A
1,5

4
C

K
2 n/2 x 2
0,5
art. no. dim. [mm] art. no. dim. [mm]
A B C S A B C
SLY 4 035 ... 3.5 3.5 SLY 4 082 ... G
1.5 2.8 8.2
SLY 4 041 ... G 1.5 2.8 SLY 4 082 ... Z
4.1 —
SLY 4 041 ... Z L
please indicate: ... no. of contacts ... surface of contact
one row 1 - 50 S = selective gold-plated
two rows 4 - 100 G = gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

G 38 N
A 2.00
Male headers
Design, matching for BLY ... ➔ G 87
– are used for interconnections of stacked PCBs
B – within the total length of the pin the insulator position can be changed as required ... Design specification-sheet
– separable! any requested number of contact can be delivered

– one row, □ 0.5 mm

2

3,6

S
1,5

L
A

2
n x2

D
2,8
2

art. no. dim. [mm]

A L S
SLY 5 040 ... 4.0 10.4
3.5
E SLY 5 075 ... 7.5 13.9
SLY 5 081 ... G
8.1 14.5
SLY 5 081 ... Z
—
SLY 5 122 ... G
12.2 18.6
SLY 5 122 ... Z
F please indicate: ... no. of contacts ... surface of contact
one row 1 - 50 S = selective gold-plated
G = gold-plated
Z = tin-plated

G – two rows, □ 0.5 mm

2 2
3,6

H
1,5

2
A

4
n/2 x 2
2,8

I art. no.
A
dim. [mm]
L S
SLY 6 040 ... 4.0 10.4
3.5
SLY 6 075 ... 7.5 13.9
SLY 6 081 ... G
8.1 14.5
K SLY 6 081 ... Z
—
SLY 6 122 ... G
12.2 18.6
SLY 6 122 ... Z
please indicate: ... no. of contacts ... surface of contact
two rows 2 - 100 S = selective gold-plated
L G = gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

N G 39
 A
Design specification for connectors, grid spacing 2 mm

date:
pieces per order: B
company:
name, dept.:
town:
street:
C
fax:
signature:

inquiry
D
order

surface finish
one row 1 - 50 contacts possible
selective gold-plated two rows 2 - 100 contacts possible E
gold-plated
tin-plated

number of contacts
F

dimensions:
G
0,5

L
C

1,5

A
H
L
A

I
1,5

B
B

2 2

C
K
L = total contact lenght
A = distance between PCBs
B = solder side
C = insertion side L

Technical data ➔ G 101 – 107

G 40 N
A 2.00
Male headers
Turned precision male contacts
– suitable for BLY 10 SHK 14 02 G ➔ G 88
B – signal and high-power contacts
– contacts gold-plated
– other number of contacts / contact surface upon request

(n/2 - 1) x 2

C
2
1,5

3,9
8,2

2
2,7

2,17
5,22 5,08
2 0,5 1,14 23,3

D art. no. signal contacts high-power contacts

SLY 13 SHK 14 02 G 12 2
surface of contact: gold-plated

2,17 (n/2 - 1) x 2
E
1,5

8,4

3,9
7
4

2 1,14 0,5 5,08 5,22 2

F art. no. signal contacts high-power contacts

SLY 14 SHK 14 02 G 12 2
surface of contact: gold-plated

Technical data ➔ G 101 – 107

N G 41
 2.00 A
Male headers
□ 0.5 mm
2 0,5 B

+ 0,5
2
0,5

1,5

S
C

B+1
2
4

0,55
B nx2 0,9
Pin 1 Pin 1

art. no. dim. [mm]

A B C S
SLY 7 SMD 036 ... 5.6 6.3 3.6 3.0
D
SLY 7 SMD 045 ... 6.5 4.5
4.6 3.5
SLY 7 SMD 062 ... 8.2 6.2
please indicate: ... no. of contacts ... surface of contact ... packing (optional)
one row 4 - 20 S = selective gold-plated SM = bar magazine
G = gold-plated
Z = tin-plated
B SM = pick and place pad
and bar magazine
E
B TR = pick and place pad
and tape and reel
(650pcs/reel)

... packing (option) - additions:

SLY 7 SMD 036-045 ... B TR: 4-15 contacts
F
Option for automatic assembly
– reel diameter Ø 330 mm

1,3
7 2
5 G
0,5
5,5
S
C

H
B
14

14

... SM 8,5 8,5

I
... B SM SLY 7 SMD ... SM SLY 7 SMD ... B SM
12 8,2

K
2
40,4
44

L
4 1,5

... B TR SLY 7 SMD 036-045 ... B TR

Technical data ➔ G 101 – 107

G 42 N
A 2.00
Male headers
□ 0.5 mm
B

- 0,5
2 2 0,5 0,5
2

1,5

S
C

B+1
2
4
C 4

0,55
B n/2 x 2
0,9
Pin 1 Pin 1
art. no. dim. [mm]
A B C S
SLY 8 SMD 036 ... 5.6 8.5 3.6 3.0
D SLY 8 SMD 045 ... 6.5 4.5
6.5 3.5
SLY 8 SMD 062 ... 8.2 6.2
please indicate: ... no. of contacts ... surface of contact ... packing (optional)
two rows 4 - 40 S = selective gold-plated SM = bar magazine
G = gold-plated B SM = pick and place pad
E Z = tin-plated and bar magazine
B TR = pick and place pad
and tape and reel
(650pcs/reel)

... packing (option) - additions:

F SLY 8 SMD ... SM; ... B SM: 6-40 contacts
SLY 8 SMD 036-045 ... B TR: 6-30 contacts

Option for automatic assembly

– reel diameter Ø 330 mm

G Ø 0,5
7 6

1,3
0,55
5,5
S
C

1,5
B

H 9 9
14

14

I 10,5 10,5
SLY 8 SMD ... SM SLY 8 SMD ... B SM
12 8,4
2

K
40,4
44

4 1,5

SLY 8 SMD 036-045 ... B TR

L

Technical data ➔ G 101 – 107

N G 43
 2.00 A
Male headers
□ 0.5 mm

2
B
0,5

1,5

S
C nx2 2

4
2

2,5
A

2
S
B 0,9 C
art. no. dim. [mm]
A B C S
SLY 9 SMD 040 ... 8.8 4.0
SLY 9 SMD 055 ... 10.3
3.3
5.5
3.5
D
please indicate: ... no. of contacts ... surface of contact ... packing (optional)
one row 2 - 20 S = selective gold-plated B SM = pick and place pad
G = gold-plated and bar magazine
Z = tin-plated
E
Option for automatic assembly

8 5

5
2

C
2 17
1,5 3,3
nx2
SLY 9 SMD ... B SM

... B SM
G

Technical data ➔ G 101 – 107

G 44 N
A 2.00
Male headers
□ 0.5 mm
B

2,75
0,5
2
2

1,5
C B 2

S
2

7
4
12,3
C S
1,5 n/2 x 2 0,9

4
A

art. no. dim. [mm]

A B C S
D SLY 10 SMD 040 ... 12.3 6.8 4 3.5
please indicate: ... no. of contacts ... surface of contact ... packing (optional)
two rows 4 - 40 S = selective gold-plated B SM = pick and place pad
G = gold-plated and bar magazine
Z = tin-plated B TR = pick and place pad
and tape and reel
E (700pcs/reel)

Option for automatic assembly

– reel diameter Ø 330 mm

F 8
5

 0,5

7
4

2 20

G nx2 C 1,5
4
8,3 SLY 10 SMD ... B SM
... B SM
16 1,5 6

H
24

4 1,5
SLY 10 SMD 040 ... 4-16 ... B TR
I 16 6

K
52,4

56

L
4 1,5
... B TR SLY 10 SMD 040 ... 18-40 ... B TR

Technical data ➔ G 101 – 107

N G 45
 2.00 A
Male headers
Design, matching for BLY ... ➔ G 87
– are used to connect overlying PCBs
– within the total length of the pin the insulating body is variable upon request B
– separable! every requested number of contact can be delivered

– one row, □ 0.5 mm

2
(n-1) x 2
0,5 C

2,75
3,6
nx2

1,5

5,5
2
0,55
A
1,5
D
Pin 1 Pin 1
4,5 0,9 2 4

art. no. dim. [mm] art. no. dim. [mm] art. no. dim. [mm]
A A A E
SLY 11 SMD 051 ... 5.1 SLY 11 SMD 092 ... 9.2 SLY 11 SMD 133 ... 13.3
please indicate: ... no. of contacts ... surface of contact
one row 4 - 20 S = selective gold-plated
G = gold-plated
Z = tin-plated
F
– two rows, □ 0.5 mm

(n/2 - 1) x 2

2,75
2 0,5

G
3,6

(n/2) x 2

7,5
1,5

0,55

4
A
1,5

6,5
Pin 1 Pin 1
0,9 2
H
art. no. dim. [mm] art. no. dim. [mm] art. no. dim. [mm]
A A A
SLY 12 SMD 051 ... 5.1 SLY 12 SMD 092 ... 9.2 SLY 12 SMD 133 ... 13.3
please indicate: ... no. of contacts ... surface of contact I
two rows 4 - 40 S = selective gold-plated
G = gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

G 46 N
A 1.27
Male headers
Pin cross section □ 0.3 mm, straight, slim insulating body
– suitable for female header BLM ... ➔ G 93
B – one row 1-20 contacts

1,25
C (n-1) x 1,27

1,7
B

0,2
n x 1,27

0,3
D
1,25 1,27

art. no. dim. [mm] art. no. dim. [mm]

A B C A B C
SLM N 1 063 ... 11.1 6.3 SLM N 11 063 ... 12.8 6.3
4.8
SLM N 1 092 ... 14.0 3.1 9.2 SLM N 11 117 ... 18.2 11.7
E SLM N 1 117 ... 16.5 11.7
please indicate: ... no. of contacts ... surface of contact
one row 1 - 20 G = gold-plated
Z = tin-plated

Pin cross section □ 0.4 mm, straight, slim insulating body

F – matching for female header BLM ... ➔ G 93
– one row 1-20 contacts

(n - 1) x 1,27

1,25
n x 1,27
G
C
B

0,4

H art. no. dim. [mm] art. no. dim. [mm]

A B C A B C
SLV N 1 055 ... 9.7 5.5 SLV N 11 055 ... 12.2 5.5
SLV N 1 080 ... 12.2 8.0 SLV N 11 080 ... 14.7 5.0 8.0
2.5
SLV N 1 105 ... 14.7 10.5 SLV N 11 105 ... 17.2 10.5
I SLV N 1 130 ... 17.2 13.0
please indicate: ... no. of contacts ... surface of contact
one row 1 - 20 G = gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

N G 47
 1.27 A
Male headers
Pin cross section □ 0.4 mm, straight
– suitable for female header BLM ... ➔ G 93
– one row 1-36 contacts B
0,4 (n-1) x 1,27

n x 1,27

C
C
1,7

2,5
A

0,2
1,27

B
art. no. dim. [mm] art. no. dim. [mm]
A B C A B C D
SLV W 1 036 ... 7.8 3.6 SLV W 1 130 ... 17.2 2.5 13.0
SLV W 1 055 ... 9.7 5.5 SLV W 11 055 ... 12.2 5.5
2.5
SLV W 1 080 ... 12.2 8.0 SLV W 11 080 ... 14.7 5.0 8.0
SLV W 1 105 ... SLV W 11 105 ...
14.7 10.5 17.2 10.5
E
please indicate: ... no. of contacts ... surface of contact
one row 1 - 36 G = gold-plated
Z = tin-plated

– matching for female header BLM ... ➔ G 93

– two rows 4-72 contacts F
– grid spacing 1.27 x 2.54 mm

0,4 (n/2 - 1) x 1,27

n/2 x 1,27 G
C
1,7
A

0,2

2,54
5
B

1,27
H
art. no. dim. [mm] art. no. dim. [mm]
A B C A B C
SLV W 2 036 ... 7.8 3.6 SLV W 2 130 ... 17.2 2.5 13.0
SLV W 2 055 ... 9.7
2.5
5.5 SLV W 22 055 ... 12.2 5.5 I
SLV W 2 080 ... 12.2 8.0 SLV W 22 080 ... 14.7 5.0 8.0
SLV W 2 105 ... 14.7 10.5 SLV W 22 105 ... 17.2 10.5
please indicate: ... no. of contacts ... surface of contact
two rows 4 - 72 G = gold-plated
Z = tin-plated K

Technical data ➔ G 101 – 107

G 48 N
A 1.27
Male headers
Straight, pin cross section □ 0.4 mm
– matching for female header BLV 2 ... ➔ G 94
B – two rows 4-72 contacts
– grid spacing 1.27 x 1.27 mm

0,4

C
((n/2-1) x 1,27)
A

1,5

2,5
1,7

B
n/2 x 1,27
D 1,27 1,27

art. no. dim. [mm] art. no. dim. [mm]

A B C A B C
SLV W 4 036 ... 7.8 3.6 SLV W 4 105 ... 14.7 10.5
2.5
E SLV W 4 055 ... 9.7 2.5 5.5 SLV W 4 130 ... 17.2 13.0
SLV W 4 080 ... 12.2 8.0
please indicate: ... no. of contacts ... surface of contact
two rows 4 - 72 G = gold-plated
Z = tin-plated
F

Technical data ➔ G 101 – 107

N G 49
 1.27 A
Male headers
Pin cross section matching for BLM ... ➔ G 93,
□ 0.4 mm, 90° angled, expanded insulating body
– one row 1-36 contacts
B
3,9
2,5
(n-1) x 1,27 n x 1,27

1,7

0,2
C

2,5
1,5
C
0,4
1,27

art. no. dim. [mm] art. no. dim. [mm]

C C D
SLV W 1 KA 030 ... 3.0 SLV W 1 KA 080 ... 8.0
SLV W 1 KA 055 ... 5.5 SLV W 1 KA 105 ... 10.5
please indicate: ... no. of contacts ... surface of contact
one row 1 - 36 G = gold-plated
Z = tin-plated E
– two rows 6-72 contacts
– grid spacing 1.27 x 2.54 mm
– packing in a bar magazine
– VPE = packing unit (pieces/tube)
– preferred number of contacts, others upon request F
(n/2 - 1) x 1,27
n/2 x 1,27
2,54
1,7

5
1,5
C

2,5 1,27 0,4

2,54 3,7

art. no. no. of

contacts
packing
unit
dim.
[mm]
art. no. no. of
contacts
packing
unit
dim.
[mm]
H
C C
SLV W 2 KA 030 10 ... 10 78 SLV W 2 KA 054 10 ... 10 78
SLV W 2 KA 030 14 ... 14 55 SLV W 2 KA 054 14 ... 14 55
SLV W 2 KA 030 16 ... 16 50 SLV W 2 KA 054 16 ... 16 50 I
SLV W 2 KA 030 20 ... 20 40 SLV W 2 KA 054 20 ... 20 40
SLV W 2 KA 030 26 ... 26 31 SLV W 2 KA 054 26 ... 26 31
3.0 5.4
SLV W 2 KA 030 30 ... 30 27 SLV W 2 KA 054 30 ... 30 27
SLV W 2 KA 030 34 ... 34 24 SLV W 2 KA 054 34 ... 34 24
SLV W 2 KA 030 40 ... 40 20 SLV W 2 KA 054 40 ... 40 20 K
SLV W 2 KA 030 50 ... 50 16 SLV W 2 KA 054 50 ... 50 16
SLV W 2 KA 030 72 ... 72 11 SLV W 2 KA 054 72 ... 72 11
please indicate: ... surface of contact
G = gold-plated
Z = tin-plated L

Technical data ➔ G 101 – 107

G 50 N
A 1.27
Male headers
Angled, pin cross section □ 0,4 mm
– matching for female header BLV 2 ... ➔ G 94
B – two rows 4-72 contacts
– grid spacing 1.27 x 1.27 mm
– preferred number of contacts, others upon request

1,27
2,5 1,27

C ((n/2-1) x 1,27)

1,5
1,7

2,5
1,5
C
D 1,27 0,4 n/2 x 1,27

art. no. no. of contacts dim. [mm] art. no. no. of contacts dim. [mm]
C C
SLV W 4 KA 036 10 ... 10 SLV W 4 KA 060 10 ... 10
E SLV W 4 KA 036 14 ... 14 SLV W 4 KA 060 14 ... 14
SLV W 4 KA 036 16 ... 16 SLV W 4 KA 060 16 ... 16
SLV W 4 KA 036 20 ... 20 SLV W 4 KA 060 20 ... 20
SLV W 4 KA 036 26 ... 26 SLV W 4 KA 060 26 ... 26
3.6 6.0
SLV W 4 KA 036 30 ... 30 SLV W 4 KA 060 30 ... 30
F SLV W 4 KA 036 34 ... 34 SLV W 4 KA 060 34 ... 34
SLV W 4 KA 036 40 ... 40 SLV W 4 KA 060 40 ... 40
SLV W 4 KA 036 50 ... 50 SLV W 4 KA 060 50 ... 50
SLV W 4 KA 036 72 ... 72 SLV W 4 KA 060 72 ... 72
G please indicate: ... surface of contact
G = gold-plated
Z = tin-plated

Sandwich-design
– for interconnections of stacked PCBs
H – within the total length of the pin the insulator position can be changed as required
– separable! any requested number of contact can be delivered

– one row, □ 0.4 mm

(n-1) x 1,27

I 1,27
1,7
3

n x 1,27
2,5
L
A

K
2,5

1,7

0,4

art. no. dim. [mm]

A L
SLV W 6 092 ... 9.2 14.7
L SLV W 6 117 ... 11.7 17.2
please indicate: ... no. of contacts ... surface of contact
one row 1 - 36 G = gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

N G 51
 1.27 A
Male headers
– two rows, □ 0.4 mm
– grid 1.27 x 1.27 mm
1,27 (n/2-1) x 1,27
B
1,27

1,7
3
n/2 x 1,27

2,5
C

L
A
2,5

1,7
0,4

art. no. dim. [mm]

A L D
SLV W 7 092 ... 9.2 14.7
SLV W 7 117 ... 11.7 17.2
please indicate: ... no. of contacts ... surface of contact
two rows 4 - 72 G = gold-plated
Z = tin-plated E
– two rows, □ 0.4 mm
– grid 1.27 x 2.54 mm
2,54 (n/2-1) x 1,27

F
1,27
1,7
3

n/2 x 1,27

5
L
A

G
2,5

1,7

0,4

art. no. dim. [mm]

A L
SLV W 8 092 ... 9.2 14.7
SLV W 8 117 ... 11.7 17.2 H
please indicate: ... no. of contacts ... surface of contact
two rows 4 - 72 G = gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

G 52 N
A 1.27
Male headers
Pin cross section □ 0.4 mm, expanded insulating body
– suitable for female header BLM ... ➔ G 93
B – one row 4-20 contacts

0,4 (n-1)x1,27
1,27
n x 1,27 2,54

C
C
1,7

B + 0,4
2,4
2,5
A
3,4
1,27
Pin 1 Pin 1 0,8
B Pin 1

art. no. dim. [mm] art. no. dim. [mm]

D A B C A B C
SLV W 1 SMD 048 ... 8.2 4 4.8 SLV W 1 SMD 073 ... 10.7 4 7.3

0,4 (n-1) x 1,27

1,27
3

E
n x 1,27 2,54
1,7

2,4
2,5

4,6
A
1,7

1,27
3,4

Pin 1 Pin 1 0,8

Pin 1
F
4

art. no. dim. [mm] art. no. dim. [mm]

A A
SLV W 9 SMD 102 ... 10.2 SLV W 9 SMD 127 ... 12.7
please indicate: ... no. of contacts ... surface of contact
G one row 4 - 20 G = gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

N G 53
 1.27 A
Male headers
– suitable for female header BLM ... ➔ G 93
– two rows 4-40 contacts
– grid spacing 1.27 x 2.54 mm B
(n/2 - 1) x 1,27
0,4
1,27
n/2 x 1,27 2,54

2,4
1,7 C

B + 0,4
2,54
A

5
3,4
1,27
0,8
B

art. no. dim. [mm] art. no. dim. [mm]

A B C A B C
D
SLV W 2 SMD 048 ... 8.2 6.6 4.8 SLV W 2 SMD 073 ... 10.7 6.6 7.3

0,4 (n/2 - 1) x 1,27

1,27
1,7

n/2 x 1,27
E
2,54
3

2,4
2,54
5

7
A
3,4

1,27

F
1,7

0,8
6,6

art. no. dim. [mm] art. no. dim. [mm]

A A
SLV W 11 SMD 102 ... 10.2 SLV W 11 SMD 127 ... 12.7
please indicate: ... no. of contacts ... surface of contact
two rows 4 - 40 G = gold-plated G
Z = tin-plated

Technical data ➔ G 101 – 107

G 54 N
A 1.27
Male headers
– matching for female header BLV 2 ... ➔ G 94
– two rows 4-40 contacts
B – grid spacing 1.27 x 1.27 mm
1,27
((n/2-1) x 1,27)

C
C

2,5
A

1,5
1,7

1,7
n/2 x 1,27
B 1,27 0,4

D art. no. dim. [mm] art. no. dim. [mm]

A B C A B C
SLV W 4 SMD 048 ... 8.2 5.3 4.8 SLV W 4 SMD 073 ... 10.7 5.3 7.3
please indicate: ... no. of contacts ... surface of contact ... packing (optional)
two rows 4 - 40 G = gold-plated B TR = pick and place pad
E Z = tin-plated and tape and reel
(250pcs/reel)

... packing (option) - additions:

SLV W 4 SMD ... B TR: 4-12 contacts
Packaging options pick and place pad in bar magazine "... B SM" and pick and place pad in tape & reel "... B TR" on request.
F Option for automatic assembly

16 5,8 0,5
1,5

70°
8,6
24
11,5

4 1,5 3
1,75

12,6

H ... B TR

– matching for female header BLV 2 ... ➔ G 94

– two rows 4-40 contacts
– grid spacing 1.27 x 1.27 mm

I 0,4 (n/2 - 1) x 1,27

1,27
1,7

n/2 x 1,27
2,54
3

2,4
2,54

7
A

K
3,4

1,27 0,8
1,7

6,6

art. no. dim. [mm] art. no. dim. [mm]

A A
L SLV W 10 SMD 102 ... 10.2 SLV W 10 SMD 127 ... 12.7
please indicate: ... no. of contacts ... surface of contact
two rows 4 - 40 G = gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

N G 55
 1.27 A
Male headers
Pin cross section □ 0.4 mm, expanded insulating body
– matching for female header BLM ... ➔ G 93
– one row 2-20 contacts B
0,4

2,5
1,27 1,27
0,8

1,8
A
C (n-1) x 1,27
B

1,7
n x 1,27

art. no. dim. [mm] art. no. dim. [mm]

A B C A B C D
SLV W 3 SMD 048 ... 9.5 3 4.8 SLV W 3 SMD 073 ... 12.0 3 7.3
please indicate: ... no. of contacts ... surface of contact ... packing (optional)
one row 2 - 20 G = gold-plated SM = bar magazine
Z = tin-plated

... packing (option) - additions:

E
SLV W 3 SMD ... SM: 4-20 contacts
Packaging options pick and place pad in bar magazine "... B SM" and pick and place pad in tape & reel "... B TR" on request.

Option for automatic assembly

F

17,5
14

G
10,5 13,3

... SM SLV W 3 SMD 048 ... SM SLV W 3 SMD 073 ... SM

– two rows 4-40 contacts

H
n/2 x 1,27
A
1,27

((n/2-1) x 1,27)
C

6,5

I
2

2,4
3,8
B 1,27

7,7 0,8
0,4
1,27 1,27
art. no. dim. [mm]
A B C K
SLV W 5 SMD 036 ... 11.5 6.2 3.6
please indicate: ... no. of contacts ... surface of contact
two rows 4 - 40 G = gold-plated
Z = tin-plated

Packaging options pick and place pad in bar magazine "... B SM" and pick and place pad in tape & reel "... B TR" on request. L

Technical data ➔ G 101 – 107

G 56 N
A 1.27
Male headers
Precision contacts, solder and plug pins, Ø 0.43 mm
– turned precision contacts, less space required on PCB
B – other number of contacts on request
Ø 0,43
(n x 1,27) + 0,41

3
(n - 1) x 1,27

2,2
2,2
3
1,27

D
Ø 0,43
art. no. no. of contacts art. no. no. of contacts
SLR 1 025 ... 25 SLR 1 050 ... 50
please indicate: ... surface of contact
G = gold-plated
Z = tin-plated
E Ø 0,43 (n x 1,27) + 0,41

1,27
(n - 1) x 1,27
3

3,25
1,9
2,2

F
3

1,27 0,84

Ø 0,43
art. no. no. of contacts
SLR 2 050 G 50
G Ø 0,43 (n x 1,27) + 0,41 1,27
3

Ø 0,43
2,2

2,2
3,4

H (n - 1) x 1,27
3,2

art. no. no. of contacts art. no. no. of contacts

SLR 3 025 G 25 SLR 3 050 G 50

I Ø 0,43 (n x 1,27) + 0,41

1,27
3

3,25
1,27

1,9
Ø 0,43
2,2

3,1

3,2

K 1,27 0,84
(n - 1) x 1,27

art. no. no. of contacts art. no. no. of contacts

SLR 4 050 G 50 SLR 4 100 G 100
surface of contact: gold-plated
L

Technical data ➔ G 101 – 107

N G 57
 1.27 A
Male headers
Precision contacts, solder and plug pins Ø 0.43 mm
– less space required on PCB
– other number of contacts on request B
(n x 1,27) + 0,41
2,2
Ø 0,43 0,8
1,27

3
C

3,3
5,6
2,2
3,35

4,63 1,27

art. no. no. of contacts no. of contacts

SLR 5 SMD 50 G 50 50 D
surface of contact: gold-plated

Technical data ➔ G 101 – 107

G 58 N
A
Customer specified male and female headers
We manufacture male and female headers for your specific application.

B All pin lengths from 7.5 to 45.3 mm for grid 2.54 mm and
7.5 to 30 mm for grid 2.00 mm available on request.

The insulator can be mounted at any requested position on the full length of the pin.

Grid spacing insertion with selective gold-plated contacts on request.

C

E
PCB connector, 4-contact male header for THR-soldering; 8-contact male header with special
extra long and additionally stabilized grid 5.75 mm insulating body including locating pin

H
angled male header with two insulators male header in 5.08 mm grid and angled male and female header
customised 1.27 mm grid, with customised
insulators

L insulator body and precision contacts female header in 5.08 mm grid

according to customer's request male header with various pin lengths

Technical data ➔ G 101 – 107

N G 59
 2.54 A
Female headers
Precision contactsfor pin cross section Ø 0.5 mm
art. no. art. no. 5
B

0,8
2,5
2,54
Ø 1,8

2,5
3,9
3,3

7,4
7,4
Ø 0,5
Ø 1,37
C
MK 01 ... MK 201 ... Ø 0,5

art. no. art. no. 5

0,8
Ø 1,8
2,54

2,5
3,9
3,3

2,5
8,5

8,5
Ø 1,37
Ø 0,5
Ø 0,5
MK 17 ... MK 217 ...
art. no. art. no. E
0,75

5
2,5
2,54
Ø 1,8

2,5
4,8
4,8
3,3

11,4
Ø 1,37
11,4

F
Ø 1,37

MK 31 ... Ø 0,5 MK 231 ... Ø 0,5

art. no. art. no. 5

0,8

Ø 1,8 2,54

2,5
G
3,3

7,5
2,5
7,5

Ø 1,35 Ø 1,35

Ø 0,86 3,2 13,1 Ø 0,86

3,2 13,1

Ø 1,1 Ø 1,1
Ø 0,5 Ø 0,5
MK 12 X 2 ... MK 212 X 2 ... H
please indicate: ... no. of contacts ... surface of contact
one row 1 - 50 G = gold-plated
two rows 2 - 100 Z = tin-plated

I
0,8

Ø 1,8 5
2,54
2,5
3,3
4,9

4,9

2,5
Ø 1,35
Ø 1,31
Ø 1,31
X

0,6
X

0,6
K
4

Ø 0,5
4

Ø 0,5

art. no. dim. [mm] art. no. dim. [mm]

X X
MK 13 X 1 ... 5.9 MK 213 X 1 ... 5.9 L
MK 13 X 2 ... 8.9 MK 213 X 2 ... 8.9
please indicate: ... no. of contacts ... surface of contact
one row 1 - 50 G = gold-plated
two rows 2 - 100 Z = tin-plated
contact spring: gold-plated M

Technical data ➔ G 101 – 107

G 60 N
A 2.54
Female headers
Precision contacts for pin cross section Ø 0.5 mm
B art. no. Ø 1,8

0,8

Ø 0,5
3,3

4,9
C
MK 06 ... 6,2

art. no. art. no.

0,8
5
2,5 2,54
Ø 1,8

2,5
D

5,5
3,3
5,5

4,7

17,9
Ø 1,32
17,9

Ø 1,32

0,63
MK 07 ... MK 207 ... 0,63
E please indicate: ... no. of contacts ... surface of contact
one row 1 - 50 G = gold-plated
two rows 2 - 100 Z = tin-plated

Low profile, less than 2.7/3.1 mm - with contact spring for pin cross section Ø 0.5 mm
F – solder pin Ø 0.76 mm
art. no. 2,5 art. no. 2,54
0,52

Ø 1,83

1,27
2,7
0,52
1,27
2,7

5
G
5

Ø 1,35
Ø 0,76
Ø 0,76
MK LP 18 ... Ø 1,35 MK LP 218 ... 5

art. no. 2,5 art. no. 2,54

0,8

H
Ø 1,83

1,27
3,1
1,27
3,1

0,8
5,9
5,9

I
Ø 1,35
Ø 0,76 Ø 0,76
MK LP 19 ... Ø 1,35 MK LP 219 ... 5

please indicate: ... no. of contacts ... surface of contact

one row 1 - 50 G = gold-plated
two rows 4 - 100 Z = tin-plated

K contact spring: gold-plated

Low profile: 2.7/3.1 mm; standard profile: 4 mm

2,5

L
4
2,7/3,1

Technical data ➔ G 101 – 107

N G 61
 2.54 A
Female headers
Precision contacts in THR-soldering technology for pin cross section Ø 0.5 mm
– THR: Through-Hole-Reflow-soldering technology (connector to be soldered with modified insert technique in Reflow-soldering meth-
od) B

2,54
A n/2 x 2,54

2,5
3,9

5
5

2,5
C
2,54
Ø 0,76 A

2,54
(n/2-1) x 2,54

2,54 Ø 0,96

art. no.
MK 228 THR ...
D
please indicate: ... no. of contacts ... surface of contact
two rows 2 - 40 G = gold-plated
Z = tin-plated
contact spring: gold-plated

Technical data ➔ G 101 – 107

G 62 N
A 2.54
Female headers
Peel-Off
B

– precision contacts are mounted in a temperature-resistant carrier strip which is removed after soldering
– special loadings upon request
D art. no.

0,75
Ø 1,8

1,6
3,9
Ø 1,5

7,4
E Ø 1,35

Ø 0,5
PO A ... G
please indicate: ... no. of contacts
from 2 pins to endless
F contact sleeve: gold-plated
contact spring: gold-plated
annotation: Technical data of carrier foil:
max. tensile strength: 193 N/mm²
max. thermal expansion - longitudinal direction: 1.7x10-5mm/°C
G melting point: 250°C

Technical data ➔ G 101 – 107

N G 63
 2.54 A
Female headers
Precision contacts on metal strip for pin cross section Ø 0.5 mm
art. no. Ø 1,8
B

3,8

0,8
17,5

0,75

3,4
3,83
2 x 2,54 = 5,08 min.
99 x 2,54 = 251, 46 max.
C
SIL 1 ... Ø 1,35

art. no. Ø 1,8

3,58
Ø 1,53
D

0,8

3,4
3,9
0,75
21,15

0,75
Ø 1,37

7,4
7,54

2 x 2,54 = 5,08 min.

99 x 2,54 = 251, 46 max.
SIL 2 ... Ø 0,5
E
art. no.

0,75
Ø 1,8

0,8
Ø 1,5

4,95

4,1
2,6
Ø 1,37
31,6

4,9

F
Ø 1,32
17,9

0,7
13
2 x 2,54 = 5,08 min.

SIL 3 ... 99 x 2,54 = 251, 46 max.

0,635

please indicate: ... no. of contacts ... surface of contact G

one row 2 - 100 G = gold-plated
Z = tin-plated
contact spring: gold-plated
annotation: carrier strip: brass
H

Technical data ➔ G 101 – 107

G 64 N
A 2.54
Female headers
Stamped contact spring (fork contact)
– separable! any requested number of contact can be delivered
B
– for □ 0.635 mm pin cross section, straight
art. no.

2,5
2,54

0,4
8
C

3,3
3,5
88,9
(n-1) x 2,54
n91,1
x 2,54
0,6 0,5
BL 1 ... 0,4

D art. no. 2,54

2,54

5,1
8
88,9x 2,54
((n/2)-1)
3,3
5

E
91,1
n/2 x 2,54
BL 2 ... 0,6 0,4

please indicate: ... no. of contacts ... surface of contact

one row 1 - 36 G = gold-plated
two rows 2 - 72 Z = tin-plated

F
– for □ 0.635 mm pin cross section, angled
– BL 4 ...: packing (option) bar magazine (≥6 contacts)
art. no. 2,5
1,25
n 91,1
x 2,54
G 88,9
(n-1) x 2,54
0,4
1,4
0,5
8

2,5

3,5 0, 5 2,54
BL 3 ... 0, 4

H art. no. 5,1

2,54 1/291,1
x 2,54
88,9
((n/2)-1) x 2,54
2,54
1,4

5, 1
8

I
3,5 2,54
0,4
BL 4 ...
0,5

please indicate: ... no. of contacts ... surface of contact

one row 1 - 36 G = gold-plated
K two rows 2 - 72 Z = tin-plated

Technical data ➔ G 101 – 107

N G 65
 2.54 A
Female headers
Low profile, fork contact spring
– separable! any requested number of contact can be delivered
B
– for □ 0.635 mm pin cross section, straight
art. no.

1,5
2,5 n x 2,54
0,8

4,1
C

5,5
8,5
2,54

3
0,4 0,6
BL LP 1 ...
art. no.
5
1,5
(n/2) x 2,54
0,8 D
4,1

5,5
8,5
3
2,54

BL LP 2 ...
0,4 0,6 E
please indicate: ... no. of contacts ... surface of contact
one row 1 - 36 S = selective gold-plated
two rows 2 - 72 Z = tin-plated

– for □ 0.635 mm pin cross section, angled

F
– BL LP 4 ...: packing in a bar magazine (min. 4 contacts)
art. no. 0,8
n x 2,54
2,5

G
5,5

2,8
1,5
0,4
1,2 2,54
BL LP 3 ... 0,6

art. no. 0,8

(n/2) x 2,54
H
5

5,5

1,5

2,8
0,4
2,54 1,2

BL LP 4 ...
2,54
0,6 I
please indicate: ... no. of contacts ... surface of contact
one row 1 - 36 S = selective gold-plated
two rows 2 - 72 Z = tin-plated

Technical data ➔ G 101 – 107

G 66 N
A 2.54
Female headers
BL 11 BL 12 BL 12 / BL 21
Ø 0,8-0,9
B Ø 0,8-0,9 BL 11
A

A
2

2
A

Ø 1,1
Ø 1,1

2,54
2,54 SL 14 2,54

C SL 13

For □ 0.635 mm pin cross section, can be put through / 260 °C Reflow
– for each contact both contact springs have to be interconnected via the PCB
– packing: bar magazine
– stamped contact spring; - separable! any requested number of contact can be delivered
D
2,8

n x 2,54
1,16
8,5

2,5
E
3

3
0,25
2,54 0,5
A

art. no. dim. [mm] art. no. dim. [mm]

A A
F BL 11 254 ... 2.54 BL 11 508 ... 5.08
please indicate: ... no. of contacts ... surface of contact
one row 1 - 45 S = selective gold-plated
Z = tin-plated

G For □ 0.635 mm pin cross section, can be put through

– packing: bar magazine
– stamped contact spring; - separable! any requested number of contact can be delivered
5,1 n/2 x 2,54 2,54
4,5

H
8,5

2,54

0,8
2,8
2,8

1,16
0,25 1,16
A 2,54 0,6

I art. no. dim. [mm] art. no. dim. [mm]

A A
BL 12 650 ... 6.50 BL 12 762 ... 7.62
2,54
n/2 x 2,54

K
4,5
8,5

2,54

0,8
3

0,25 1,16
L
2,54 1,16
A 0,6
art. no. dim. [mm] art. no. dim. [mm]
A A
BL 21 650 ... 6.50 BL 21 762 ... 7.62
please indicate: ... no. of contacts ... surface of contact
M two rows 2 - 90 S = selective gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

N G 67
 2.54 A
Female headers
Precision contacts for □ 0.635 mm and Ø up to 0.85 mm pin cross section

2,54
B

2,54
C
3,1
n x 2,54

Ø 0,6

art. no. inner contact spring surface

BL 5 ... ≥0,75 µm Au
BL 5 025 ... ≥0,25 µm Au D
please indicate: ... no. of contacts
one row 1 - 36

2,54
2,54

E
7

5,08
3,1

n/2 x 2,54

Ø 0,6 F
art. no. inner contact spring surface
BL 6 ... ≥0,75 µm Au
BL 6 025 ... ≥0,25 µm Au
please indicate: ... no. of contacts
two rows 2 - 72 G
contact sleeve: tin-plated
contact spring: gold-plated

art. no. 7,6

2,54 H
4,2

5,8

6,9

7,6
10

2,54
Ø 0,6
n/3 x 2,54 I
BL KG 3 ... 2,54

please indicate: ... no. of contacts

three rows 9 - 96
art. no. 2,54
K
2,54
7

8,3
Ø 0,6

L
3,2

BL 7 ... n x 2,54

please indicate: ... no. of contacts

one row 1 - 36
contact sleeve: tin-plated
contact spring: gold-plated M

Technical data ➔ G 101 – 107

G 68 N
A 2.54
Female headers
Precision contacts for □ 0.635 mm and Ø up to 0.85 mm pin cross section
– packing in a bar magazine (≥6 contacts)
B – no capilliary action when soldering due to protected inner contact
– separable! any requested number of contact can be delivered
art. no. 2,54

2,54
7

8,3
C

5,08
Ø 0,6
2,54
3,2
n/2 x 2,54
BL 8 ...
D please indicate: ... no. of contacts
two rows 4 - 72
contact sleeve: tin-plated
contact spring: gold-plated

E – no capilliary action when soldering due to protected inner contact

– separable! any requested number of contact can be delivered
art. no. n x 2,54
2,54
2,5

3,3

2,5
3,8

F
7

MK 21 ... Ø 0,6

please indicate: ... no. of contacts

G one row 1 - 50
art. no. n/2 x 2,54
2,54
2,5
3,8

H
5,08

2,54
7

MK 221 ... Ø 0,6

please indicate: ... no. of contacts

I two rows 2 - 100
contact sleeve: tin-plated
contact spring: gold-plated

Technical data ➔ G 101 – 107

N G 69
 2.54 A
Female headers
Precision contacts for □ 0.635 mm and Ø up to 0.85 mm pin cross section
– with aligned Wire-Wrap pins
– no capilliary action when soldering due to protected inner contact B
– separable! any requested number of contact can be delivered
art. no.

7
n x 2,54

2,5
2,54
C

13,08
0,635
BL 9 ...
please indicate: ... no. of contacts D
one row 1 - 36
art. no.

2,54
n/2 x 2,54
7

2,54
E

5
13,08

BL 10 ... 0,635

please indicate: ... no. of contacts F

two rows 2 - 72
contact sleeve: tin-plated
contact spring: gold-plated

– for PC 104 modules G

– no capilliary action when soldering due to protected contact insert
– separable! any requested number of contact can be delivered
art. no.
7

n x 2,54
H
21,9

2,54
2,5

BL 13 ...
I
Ø 0,75

please indicate: ... no. of contacts

one row 1 - 36
art. no.

n/2 x 2,54
K
7

2,54

2,54
21,9

BL 14 ...
Ø 0,75
L
please indicate: ... no. of contacts
two rows 2 - 72
contact sleeve: gold-plated
contact spring: gold-plated
M

Technical data ➔ G 101 – 107

G 70 N
A 2.54
Female headers
Precision contacts for □ 0.635 mm and Ø up to 0.85 mm pin cross section
– for PC 104 modules
B – no capilliary action when soldering due to protected contact insert
– separable! any requested number of contact can be delivered

– one row, 1-36 contacts

n x 2,54

C 2,54

11,05

2,5
A
D
0,635

art. no. dim. [mm]

A
BL 18 141 ... 14.1
E BL 18 219 ... 21.9
please indicate: ... no. of contacts
one row 1 - 36
contact sleeve: gold-plated

F contact spring: gold-plated

– two rows, 2-72 contacts

n/2 x 2,54
7

11,05

G 5
A

2,54
2,54

0,635
H art. no. dim. [mm]
A
BL 19 141 ... 14.1
BL 19 219 ... 21.9

I please indicate: ... no. of contacts

two rows 2 - 72
contact sleeve: gold-plated
contact spring: gold-plated

Technical data ➔ G 101 – 107

N G 71
 2.54 A
Female headers
Turned precision female contacts
– suitable for SL 26 SHK 14 02 G ➔ G 19 and SL 27 SHK 14 02 SMD G ➔ G 32
– signal and high-power contacts B
– contacts gold-plated
– other number of contacts / contact surface upon request
(n/2 - 1) x 2,54
2,54

5,08
2,26

2,72
8,9

2,54
3,81
5,08 5,08
0,45 0,25 27,94

D
2,46 0,6 1,15 2,54
art. no. signal contacts high-power contacts
BL 22 SHK 14 02 G 12 2
surface of contact: gold-plated

Technical data ➔ G 101 – 107

G 72 N
A 2.54
Female headers
Low profile, fork contact spring
– for □ 0.635 mm pin cross section
B – other number of contacts on request
art. no.

2,55
1,5
n x 2,54

4,7
2,5

4,1
Pin 1 0,9

5,5
2,54

6,9

0,4
0,8

4,2 2,54
BL LP 5 SMD ... Pin 1 Pin 1 0,6

please indicate: ... no. of contacts ... surface of contact ... packing (optional)
D one row 4 - 20 S = selective gold-plated SM = bar magazine
Z = tin-plated B SM = pick and place pad
and bar magazine

Option for automatic assembly

E
7,5 5

4,7

14
14
8,4
0,4

F
0,6 A 8,5 8,5
2,54

BL LP 5 SMD ... B BL LP 5 SMD ... SM BL LP 5 SMD ... B SM

Technical data ➔ G 101 – 107

N G 73
 2.54 A
Female headers
art. no.
B

1,5

7,3
5 (n/2) x 2,54

2,55
4,1

5,5
Pin 1 0,9

6,9
2,54

0,4
0,8

6,8 2,54
C

2,54
Pin 1

BL LP 6 SMD ... Pin 1 0,6

please indicate: ... no. of contacts ... surface of contact ... packing (optional)
two rows 4 - 40 S = selective gold-plated SM = bar magazine
Z = tin-plated B SM = pick and place pad D
and bar magazine

... packing (option) - additions:

BL LP 6 SMD ... SM 6-40 contacts
BL LP 6 SMD ... B SM 4-40 contacts
E
Option for automatic assembly

7,5 7,5

F
4,7
8,4

14

14
A
2,54 0,6
0,4

10,5 10,5

BL LP 6 SMD ... B BL LP 6 SMD ... SM BL LP 6 SMD ... B SM G

art. no.
1,5

2,5 n x 2,54

2,4
2,1

H
4,1

5,5

2,54 0,9
9,9

0,8
1,6

2,54 0,6
0,4
BL LP 7 SMD ...
I
1,45

please indicate: ... no. of contacts ... surface of contact ... packing (optional)
one row 1 - 20 S = selective gold-plated SM = bar magazine
Z = tin-plated

... packing (option) - additions:

BL LP 7 SMD ... SM 4-20 contacts K
Option for automatic assembly

L
8,5

14

BL LP 7 SMD ... SM
M

Technical data ➔ G 101 – 107

G 74 N
A 2.54
Female headers
Precision contacts for □ 0.635 mm and Ø up to 0.85 mm pin cross section
– no capilliary action when soldering due to protected contact insert
B – separable! any requested number of contact can be delivered
2,5 2,5
n x 2,54 1

B
7
C

8,6

C
2,5
2,54 5,08
A Pin 1 Pin 1 Pin 1
Ø 0,6

art. no. dim. [mm]

D A B C
BL 15 SMD 043... 4.3 5.0 2.5
BL 15 SMD 089... 8.9 9.5 4.8
please indicate: ... no. of contacts ... packing (optional)
one row 4 - 20 SM = bar magazine
E B SM = pick and place pad and bar magazine
B TR = pick and place pad and tape and reel (400pcs/reel)

... packing (option) - additions:

BL 15 SMD ... B TR: 4-12 contacts
contact sleeve: tin-plated
F contact spring: gold-plated

Option for automatic assembly

– reel diameter Ø 330 mm
7,5 5
G

4,7
10,1
Ø 0,6 2,54 A

H
14

14

I 8,5
BL 15 SMD 043 ... SM
8,5
BL 15 SMD 043 ... B SM
17,5

17,5

K
... SM 10,8 10,8
... B SM BL 15 SMD 089 ... SM BL 15 SMD 089 ... B SM
16 10,35
L
Ø2

40,4
44

M 4 Ø 1,5
... B TR

Technical data ➔ G 101 – 107

N G 75
 2.54 A
Female headers
Precision contacts for □ 0.635 mm and Ø up to 0.85 mm pin cross section
– no capilliary action when soldering due to protected contact insert
– separable! any requested number of contact can be delivered B
2,54

Ø 1,2 (2x)
n/2 x 2,54
2,54

8,6
C

2,54

B
5

C
Pin 1
Ø 1,2 PS Pin 1
A Ø 0,6 2,54 Pin 1 1

1,4
art. no. dim. [mm]
A B C D
BL 16 SMD 067 ... 6.7 7.5 2.5
BL 16 SMD 113 ... 11.3 12.0 4.8
please indicate: ... no. of contacts ... packing (optional)
two rows 4 - 40 SM = bar magazine
B SM = pick and place pad and bar magazine E
B TR = pick and place pad and tape and reel
... positioning (optional)
PS = locating pin (2 pcs/bar bigger than 6 contacts)

... packing (option) - additions:

BL 16 SMD 067 ... B TR: 4-6 contacts, 500 pcs/reel F
BL 16 SMD ... B TR: 6-40 contacts, 250 pcs/reel
contact sleeve: tin-plated
contact spring: gold-plated

Option for automatic assembly G

– reel diameter Ø 330 mm

7,5
7,5
4,7

17,5
17,5
10,4

A 13,3 13,3
... SM Ø 0,6 2,54
BL 16 SMD ... SM BL 16 SMD ... B SM
... B SM I
Ø 1,5

12 11,4
16
7,5

4 K
Ø 1,5
BL 16 SMD 067 ... 4-6 B TR

16 16 12
12,6

L
2
2

68,4
40,4

72
44

4 1,5
M
... B TR BL 16 SMD 067-113 ... 6-24 B TR BL 16 SMD 067-113 ... 26-40 B TR

Technical data ➔ G 101 – 107

G 76 N
A 2.54
Female headers
Precision contacts for □ 0.635 mm and Ø up to 0.85 mm pin cross section
– no capilliary action when soldering due to protected inner contact
B – separable! any requested number of contact can be delivered
art. no.
n x 2,54 1

1,25
7

3,5
2,5
C 12,2
2,54

BL 17 SMD ... Ø 0,6

2,54

please indicate: ... no. of contacts ... packing (optional)

one row 2 - 20 SM = bar magazine
D TR = tape and reel (1,300pcs./reel)

packing (option) - additions:

BL 17 SMD ... SM: 3-20 contacts
BL 17 SMD ...TR: 2-13 contacts
E contact sleeve: tin-plated
contact spring: gold-plated

Option for automatic assembly

– reel diameter Ø 330 mm

F
8,5

G 14
BL 17 SMD ... SM
... SM
16 2,8

H
40,4
44

I 4
BL 17 SMD ... TR
... TR

Technical data ➔ G 101 – 107

N G 77
 2.54 A
Female headers
– no capilliary action when soldering due to protected inner contact
– separable! any requested number of contact can be delivered
art. no. B
n/2 x 2,54 1
14, 7

3
4,6
2,54

5
7
C
2,54
BL 20 SMD ... 10,1 Ø 0, 6

please indicate: ... no. of contacts ... packing (optional)

two rows 4 - 40 SM = bar magazine
TR = tape and reel (600pcs/reel)
D
... packing (option) - additions:
BL 20 SMD ... TR: 4-26 contacts
contact sleeve: tin-plated
contact spring: gold-plated
E
Option for automatic assembly
5,9

10,2
6,8

... SM BL 20 SMD ... SM

G
20 5,8
2
40,4

H
44

4 Ø 1,5

... TR BL 20 SMD ... 4-26 TR

I
Turned precision female contacts
– suitable for SL 26 SHK 14 02 G ➔ G 19 and SL 27 SHK 14 02 SMD G ➔ G 32
– signal and high-power contacts
– contacts gold-plated
– other number of contacts / contact surface upon request
(n/2 - 1) x 2,54
K
2,54
5,08
2,72
0,45

8,9
9

L
2,54

3,81
5,08 5,08
2,46 0,6 1,15 6,6 27,94
7,1

art. no. signal contacts high-power contacts

BL 23 SHK 14 02 SMD G 12 2
surface of contact: gold-plated M

Technical data ➔ G 101 – 107

G 78 N
A 2.54
Female headers
Precision contacts for □ 0.635 mm and Ø up to 0.85 mm pin cross section
– no capilliary action when soldering due to protected inner contact
B – separable! any requested number of contact can be delivered
art. no. 2,54 n x 2,54
5,08

2,8
3,3

5,2
2,5
5,4
C 4,6 n x 2,54 1
2,54
Pin 1 Pin 1 Ø 0,6
MK 22 SMD ... Pin 1

please indicate: ... no. of contacts ... packing (optional)

one row 4 - 20 B SM = pick and place pad and bar magazine
B TR = pick and place pad and tape and reel (600pcs/reel)
D
... packing (option) - additions:
MK 22 SMD ... B TR: 4-20 contacts
contact sleeve: tin-plated
contact spring: gold-plated
E Option for automatic assembly
7
5
7,5
2,54

Ø 0,6
F

14
6,9
3,3

4,6 8,5

... B SM MK 22 SMD ... B SM

G 12
Ø2 8,1
12 Ø2 8,1

H 68,4
40,4

72
44

4 Ø 1,5

I Ø 1,5 4

... B TR MK 22 SMD ... 4-13 B TR MK 22 SMD ... 14-20 B TR

Technical data ➔ G 101 – 107

N G 79
 2.54 A
Female headers
art. no. 2,54 n x 2,54
n/2 x 2,54 1

2,7
7,5
2,5
5,4

5
2,54
6,9
2,45
MK 222 SMD ... Pin 1
Pin 1 Ø 0,6

please indicate: ... no. of contacts ... packing (optional) C

two rows 4 - 40 B SM = pick and place pad and bar magazine
contact sleeve: tin-plated
contact spring: gold-plated

Option for automatic assembly D

9
2,54 7,5 7,5
2,5

Ø 0,6

14
7,2
5,4
E
n x 2,54
6,9
10,5
... B SM MK 222 SMD ... B SM

Precision contacts for □ 0.635 mm and up to Ø 0.85 mm pin cross section F

– no capilliary action when soldering due to protected inner contact
– separable! any requested number of contact can be delivered
art. no. n x 2,54 n/2 x 2,54
3,3 1

G
3,3

2,2
2,5
1,9 2,54 2,54

6,6
MK 24 SMD ... Ø 0,6

please indicate: ... no. of contacts

one row 2 - 20 H
contact sleeve: tin-plated
contact spring: gold-plated

Precision contacts for pin cross section Ø 0.5 mm

– one row
– no capilliary action when soldering due to protected contact insert
I
– separable! any requested number of contact can be delivered
art. no. (n-1) x 2,54
2,85 n x 2,54 1
3,3

2,2
2,5

2,54 2,54
K
1,9
6,9
MK 25 SMD ... Ø 0,6

please indicate: ... no. of contacts

one row 2 - 20
contact sleeve: tin-plated L
contact spring: gold-plated

Technical data ➔ G 101 – 107

G 80 N
A 2.54
Female headers
Precision contacts for pin cross section Ø 0.5 mm
– one row
B – no capilliary action when soldering due to protected inner contact
– separable! any requested number of contact can be delivered
art. no. Ø 1,82
2,54
(n-1) x 2,54
5,08
n x 2,54

0,8

2,5
3,3

4,8
2,5
C

5,8
Ø 0,5 2,54
MK 23 SMD ... 4,2 Pin 1 Pin 1 Pin 1 1

please indicate: ... no. of contacts ... packing (optional)

one row 4 - 20 B SM = pick and place pad and bar magazine
D B TR = pick and place pad and tape and reel (600pcs/reel)

... packing (option) - additions:

MK 22 SMD ... B TR: 4-20 contacts
contact sleeve: tin-plated
contact spring: gold-plated
E
Option for automatic assembly

G ... B SM MK 23 SMD ... B SM

12 Ø2 8,1
12 Ø2 8,1

H 68,4
40,4

72
44

I 4 Ø 1,5
Ø 1,5 4

... B TR MK 23 SMD ... 4-13 B TR MK 23 SMD ... 14-20 B TR

Technical data ➔ G 101 – 107

N G 81
 2.54 A
Female headers
– two rows
– no capilliary action when soldering due to protected inner contact
– separable! any requested number of contact can be delivered B
art. no. 2,54 ((n/2)-1) x 2,54 n/2 x 2,54 1

2,5

7,5
5,8

2,7
6,9 2,54 Ø 0,5 2,54 C
MK 223 SMD ... Pin 1 Pin 1 Pin 1

please indicate: ... no. of contacts ... packing (optional)

two rows 4 - 40 B SM = pick and place pad and bar magazine
contact sleeve: tin-plated
contact spring: gold-plated D
Option for automatic assembly

Technical data ➔ G 101 – 107

G 82 N
A 2.54
Female headers
Precision contacts for pin cross section Ø 0.5 mm
– no capilliary action when soldering due to protected contact insert
B – separable! any requested number of contact can be delivered
art. no. n/2 x 2,54 2,54
2,54 ((n/2)-1) x 2,54 2,54

2,5

2,54
2,54

5,08
4,2
C

1,5
Ø1
MK 220 SMD ... Pin 1 Pin 1 Pin 1

please indicate: ... no. of contacts ... packing (optional)

two rows 4 - 40 B SM = pick and place pad and bar magazine
B TR = pick and place pad and tape and reel
D
... packing (option) - additions:
MK 220 SMD ... BTR 6-12 contacts; 800 pcs/reel
MK 220 SMD ... BTR 14-40 contacts; 500 pcs/reel
contact sleeve: tin-plated
E contact spring: gold-plated

Option for automatic assembly

– reel diameter Ø 330 mm

G MK 220 SMD ... B SM

... B SM
16 6,3

H 12 6,3
68,4

72
24

4 1,5

4
I
1,5

... B TR MK 220 SMD ... 6-12 B TR MK 220 SMD ... 14-40 B TR

Technical data ➔ G 101 – 107

N G 83
 2.54 A
Female headers
Precision contacts for □ 0.635 mm and up to Ø 0.85 mm pin cross section in pressfit technol-
ogy
– press-fit mounting without soldering, resilient press-fit area B
– no capilliary action when soldering due to protected inner contact contact
– Pressfit bar with insulating body has to be inserted up to the PCB
– separable! any requested number of contact can be delivered
art. no.
C
n x 2,54

2,5
2,5
2,54

7
Ø 1,14
BLP 1 ...
art. no. n/2 x 2,54
D

2,54
2,54

2,5
7

5
Ø 1,14
BLP 2 ...
please indicate: ... no. of contacts E
one row 1 - 36
two rows 2 - 72
contact sleeve: tin-plated
contact spring: gold-plated
F
Hole diameter in PCB - hole structure acc. to DIN EN 60352-5

Technical data ➔ G 101 – 107

G 84 N
A 2.54
Female headers
Female connectors for LED applications, low profile, fork contact spring
– insulating body made of white plastic (nature)
B – for □ 0.635 mm pin cross section, straight
– separable! any requested number of contact can be delivered
art. no.

1,5
2,5 n x 2,54
0,8

4,1
C

5,5
8,5
2,54

3
0,4 0,6
BL LP 9 LED ...
please indicate: ... no. of contacts ... surface of contact
D one row 1 - 36 S = selective gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

N G 85
 2.54 A
Female headers
Female connectors for LED applications
– insulating body made of white plastic (nature)
– for □ 0.635 mm pin cross section, straight B
– separable! any requested number of contact can be delivered
art. no.

1,5
2,5 n x 2,54

2,4
2,1
4,1
C

5,5
2,54 0,9

9,9
0,8

1,6
2,54 0,6
0,4
BL LP 8 LED SMD ... 1,45

please indicate: ... no. of contacts ... surface of contact ... packing (optional)
D
one row 1 - 20 S = selective gold-plated SM = bar magazine
Z = tin-plated

... packing (option) - additions:

BL LP 8 LED SMD ... SM 4-20 contacts E
Option for automatic assembly

F
8,5

14

BL LP 8 LED SMD ... SM

G

Technical data ➔ G 101 – 107

G 86 N
A 2.00
Female headers
Precision contacts for □ 0.5 mm and Ø up to 0.56 mm, pin cross section
– no capilliary action when soldering due to protected inner contact
B – separable! any requested number of contact can be delivered
art. no. n x 2,0
A
2

2,2
3,8

4,2

2
C

7,4
Ø 0,5 A
BLY 1 ...
art. no. n/2 x 2,0

D A

2,2
3,8

4,2

4
7,4
2

A
BLY 2 ...
E
Ø 0,5

art. no. 2
A n x 2,0
2,2

4,2
5,6

2
3,3

F BLY 3 ...
1,45 A

Ø 0,5

art. no. 2 2 n/2 x 2,0

A
2,2
3,8

4,2

4
5,6
7,6

G 3,3

2
A
Ø 0,9

Ø 0,5
BLY 4 ...
please indicate: ... no. of contacts
H one row 1 - 50
two rows 2 - 100
contact sleeve: tin-plated
contact spring: gold-plated

Technical data ➔ G 101 – 107

N G 87
 2.00 A
Female headers
Turned precision female contacts
– suitable for SLY 13 SHK 14 02 G ➔ G 41 and SLY 14 SHK 14 02 G ➔ G 41
– signal and high-power contacts B
– contacts gold-plated
– other number of contacts / contact surface upon request
(n/2 - 1) x 2
2

6,35

4
2
8,65
2,54
5,22 5,08
0,46 24
2 0,5 1,14

art. no. signal contacts high-power contacts D

BLY 10 SHK 14 02 G 12 2
surface of contact: gold-plated

Technical data ➔ G 101 – 107

G 88 N
A 2.00
Female headers
Precision contacts for □ 0.5 mm and Ø up to 0.56 mm, pin cross section
B art. no. 2
2
nx2 2

5
Ø 0,5

4,2

2,54
5,7
0,76

C BLY 5 SMD ... 4,6 Pin 1

Pin 1
4

please indicate: ... no. of contacts ... packing (optional)

one row 4 - 20 B SM = pick and place pad and bar magazine
B TR = pick and place pad and tape and reel (700pcs/reel)

D ... packing (option) - additions:

BLY 5 SMD ... B TR: 4-15 contacts
contact sleeve: tin-plated
contact spring: gold-plated

Option for automatic assembly

E 8,5

4,1
14
F
7

... B SM BLY 5 SMD ... B SM

G 12
2
8,1

40,4
44

H
4 Ø 1,5
... B TR BLY 5 SMD ... 4-15 B TR

Technical data ➔ G 101 – 107

N G 89
 2.00 A
Female headers
– no capilliary action when soldering due to protected inner contact
– separable! any requested number of contact can be delivered
art. no. 7,2
B
nx2

Ø 0,5
2

2,54
2
4,2 2 C
BLY 6 SMD ... 1,9 0,76

please indicate: ... no. of contacts ... packing (optional)

one row 2 - 20 TR = tape and reel

... packing (option) - additions: D

BLY 6 SMD ... TR: 2-10 contacts
BLY 6 SMD ... TR: 11-20 contacts
contact sleeve: tin-plated
contact spring: gold-plated

Option for automatic assembly E

– reel diameter Ø 330 mm

12 2 2,5

F
28,4
32

4 1,5

BLY 6 SMD ... TR (2-10 contacts) (2.400 pcs/reel)

G
12 2,7
2

H
52,4
56

4 1,5
... TR BLY 6 SMD ... TR (11-20 contacts) (2.200 pcs/reel)
I

Technical data ➔ G 101 – 107

G 90 N
A 2.00
Female headers
Precision contacts for □ 0.5 mm and Ø up to 0.56 mm, pin cross section
– no capilliary action when soldering due to protected inner contact
B – separable! any requested number of contact can be delivered
art. no. 4 n/2 x 2,0
2
2
2

4,2
Ø 0,5

5,7
C

7
2,54
6,8
BLY 8 SMD ... Pin 1 Pin 1 0,76

please indicate: ... no. of contacts ... packing (optional)

two rows 4 - 40 SM = bar magazine
D B SM = pick and place pad and bar magazine
B TR = pick and place pad and tape and reel (650pcs/reel)

... packing (option) - additions:

BLY 8 SMD ... B TR: 6-30 contacts
E contact sleeve: tin-plated
contact spring: gold-plated

Option for automatic assembly

– reel diameter Ø 330 mm

F 9 9
14

14
G
4,1

4,1
10,5 10,5

BLY 8 SMD ... B SM BLY 8 SMD ... SM

... B SM
H 12 7,9
40,4
44

I
4 1,5

... B TR BLY 8 SMD ... B TR

Technical data ➔ G 101 – 107

N G 91
 2.00 A
Female headers
Precision contacts for □ 0.5 mm and Ø up to 0.56 mm pin cross section
– no capilliary action when soldering due to protected inner contact
– separable! any requested number of contact can be delivered B
art. no. n/2 x 2,0
(n/2-1) x 2,0
2
4,2 2

2,54
C

2
4

7
7,2
11,5
BLY 9 SMD ... 0,76

please indicate: ... no. of contacts ... packing (optional)

two rows 4 - 40 SM = bar magazine
TR = tape and reel (800pcs./reel) D
... packing (option) - additions:
BLY 9 SMD ... SM: 8-40 contacts
BLY 9 SMD ... TR: 4-20 contacts
contact sleeve: tin-plated
contact spring: gold-plated E
Option for automatic assembly
– reel diameter Ø 330 mm

14
F
8,5

G
... S M BLY 9 SMD ... SM

16 4

H
28,4
32

Ø 1,5

... TR
4
BLY 9 SMD ... TR I

Technical data ➔ G 101 – 107

G 92 N
A 1.27
Female headers
Stamped contact spring (fork contact)
– matching male header SLM ... ➔ G 47 and SLV ... ➔ G 47
B – one row 1-36 contacts

2,5

nx 1,27
45,7

8,5
C

2,5
0,5
44,45

A
0,4 0,6 1,27
0,5

art. no. dim. [mm] art. no. dim. [mm]

D BLM KG 1 ... 3.0 BLM LG 1 ... 5.1
please indicate: ... no. of contacts ... surface of contact
one row 1 - 36 G = gold-plated
Z = tin-plated

E 2,5
n 45,7
x 1,27

2,5
8,5

0,5
10

44,45
0,5

0,6
F 3
0,4 1,27

art. no.
BLM LA 1 ...
please indicate: ... no. of contacts ... surface of contact
G one row 1 - 36 G = gold-plated
Z = tin-plated

– suitable for male header SLV ➔ G 47

– two rows 4-72 contacts - grid spacing 1.27 x 2.54 mm

H 5

n/2 x 1,27
2,5

8,5

I
A

0,5
2,54
0,4 1,27

art. no. dim. [mm] art. no. dim. [mm]

BLM KG 2 ... 3.0 BLM LG 2 ... 5.1
K please indicate: ... no. of contacts ... surface of contact
two rows 4 - 72 G = gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

N G 93
 1.27 A
Female headers
– suitable for male header SLV W 4 ... ➔ G 49
– two rows 4-72 contacts
– Vorzugspolzahlen, andere auf Anfrage B
– verzinnte Kontakte auf Anfrage

(n/2) x 1,27 +0,46

3 (n/2-1) x 1,27

4,3
6,7
1,27

1,27
0,15 0,48

art. no.
BLV 2 10 G
no. of contacts
D
10
BLV 2 20 G 20
BLV 2 26 G 26
BLV 2 30 G 30
BLV 2 40 G 40 E
BLV 2 50 G 50
BLV 2 72 G 72
surface of contact: gold-plated

Technical data ➔ G 101 – 107

G 94 N
A 1.27
Female headers
Precision contacts for Ø 0.35...0.46 mm, pin cross section
– no capilliary action when soldering due to protected inner contact
B – other number of contacts on request!

0,4
(n x 1,27) + 0,41
(n-1) x 1,27

C
max.2,5

4,1
3,4

2,2
4,1
1,27

2,45
Ø 0,48 max.

D
art. no. no. of contacts no. of contacts art. no. no. of contacts no. of contacts
BLR 1 025 Z 25 25 BLR 1 050 Z 50 50

E
0,4

((n/2)-1) x 1,27

1,27
(n/2 x 1,27) + 0,41

3,25
3,8
3,4

3,95
max.2,5

1,27
2,45

F
Ø 0,48 max.

art. no. no. of contacts no. of contacts art. no. no. of contacts no. of contacts
BLR 2 050 Z 50 50 BLR 2 100 Z 100 100
G
0,4

(n x 1,27) + 0,41 (n-1) x 1,27

3
max.
2,5

2,2
3,4
5,3

4,1

H
1,27 Ø 0,48 max.

art. no. no. of contacts no. of contacts art. no. no. of contacts no. of contacts
I BLR 3 025 Z 25 25 BLR 3 050 Z 50 50
0,4

((n/2)-1) x 1,27
1,27

(n/2 x 1,27) + 0,41

3,25
3,8
3,4

3,3

K
5
max.2,5

1,27

1,27 Ø 0,48 max.

L art. no.
BLR 4 100 Z
no. of contacts
100
no. of contacts
100
contact sleeve: tin-plated
contact spring: gold-plated

Technical data ➔ G 101 – 107

N G 95
 1.27 A
Female headers
Fork contact for □ 0.3 mm and □ 0.4 mm pin cross section, wide insulating body
– suitable for male header SLM ... ➔ G 47 and SLV ... ➔ G 47
– one row 4-20 contacts B
art. no. 2,5 n x 1,27
Y 2,54 2,54

8,5

8,6
10,25
C

1,5

4
0,4 0,7
Y Pin 1 1,27
8,3 Pin 1
1,27
BLM 1 SMD ... Pin 1

please indicate: ... no. of contacts ... surface of contact

one row 4 - 20 G = gold-plated
Z = tin-plated
D
Grid spacing 1.27 x 2.54 mm
– suitable for male header SLV ... ➔ G 47
– two rows 4-40 contacts
art. no. 5 n/2 x 1,27
E
2,54 1,27
Y

4
8,5
10,25
1,5

11
1,27

4
Pin 1 Y 0,4 0,7
1,27
10,5
BLM 2 SMD ... Pin 1 Pin 1

please indicate: ... no. of contacts ... surface of contact

two rows 4 - 40 G = gold-plated
Z = tin-plated
G
Fork contact for □ 0.3 mm and □ 0.4 mm pin cross section, wide insulating body
– matching for male header SLV ➔ G 47
– one row 2-20 contacts
art. no.
(n-1) x 1,27 H
0,5

0,4

n x 1,27 1,27
2,5

5
8,5

13,5 1,27 0,8

BLM 3 SMD ...

I
please indicate: ... no. of contacts ... surface of contact
one row 2 - 20 G = gold-plated
Z = tin-plated

Technical data ➔ G 101 – 107

G 96 N
A 1.27
Female headers
Turned precision contacts for Ø 0.35...0.46 mm
– closed precision turned part with 3-finger contact prevents rising of flux agents
B – other number of contacts on request!
3,25 0,8
(n/2 x 1,27) + 0,41
1,27
1,27

2,5
3,8
5,25
C

6
4,9 Ø 0,48 1,27
art. no. no. of contacts
BLR 6 SMD 100 Z 100
D
(n x 1,27) + 0,41 0,8
Ø 0,48

1,1
1,27
2,2

4,4
E
4,1 4,7
1,27

art. no. no. of contacts no. of contacts

BLR 7 SMD 50 Z 50 50
F contact sleeve: tin-plated
contact spring: gold-plated

Technical data ➔ G 101 – 107

N G 97
 2.54 A
Direct female connectors
For PCB thickness: 1.4...1.8 mm
10
B

3,5
2 A A
B

7,9

13,4
4,2

10
0,3
5,08
C
0,4
2,54
C
art. no. no. of contacts dim. [mm]
A B C
DF OB 06 12 21.33 17.70 12.70 D
DF OB 07 14 23.87 20.24 15.24
DF OB 10 20 31.49 27.86 22.86
DF OB 17 34 49.27 45.64 40.64
surface of contact: tin-plated
E

Technical data ➔ G 101 – 107

G 98 N
A
Jumpers
For 0.6...0.64 mm wire wrap pins and for Ø 0.6...0.7 mm
B 2,5 7,5

6,5
C art. no. grid [mm] surface of contact no. of version
contacts
CAB 5 05 G ... 0.5 µm gold
CAB 5 10 G ... 5.08 1.0 µm gold 2 closed, hole for test probe
CAB 5 Z ... 5.0 µm tin
D 2,5 5

6,5
E art. no. grid [mm] surface of contact no. of version
contacts
CAB 4 G ... 2.54 0.1 µm gold 2 closed

F 2,5 5

G 4
art. no. grid [mm] surface of contact no. of version
contacts
CAB 6 05 G ... 0.5 µm gold
CAB 6 10 G ... 2.54 1.0 µm gold 2 open, for miniature alligator clip
H CAB 6 Z ... 5.0 µm tin
please indicate: ... colour
S = black
R = red
B = blue
G = grey
I
– the flexible contacts are short-circuiting two pins
– the jumpers can be mounted behind and next to each other
1,2 5

K
13,5
5,08
6

1,4

L
2,4
art. no. grid [mm] surface of contact no. of version
contacts
CAB 9 G ... 2.54 <0.1 µm gold 2 tag, open
please indicate: ... colour
S = black
M R = red

Technical data ➔ G 101 – 107

N G 99
 A
Jumpers
For □ 0.5 mm and for Ø 0.4...0.5 mm
4
B
2 1

3,5
C
art. no. grid [mm] surface of contact no. of version
contacts
CAB 10 G S 2 0.1 µm Au 2 open, for miniature alligator clip
colour: black
4 D
2 1

4,5
E
art. no. grid [mm] surface of contact no. of version
contacts
CAB 11 G S 2 0.1 µm Au 2 open, for miniature alligator clip
colour: black F
For □ 0.3...0.4 mm and Ø 0.4...0.5 mm
0,85

G
1,5

5,5

1,25 2,5
art. no. grid [mm] surface of contact no. of version
contacts H
CAB 15 G S 1.27 <0.1 µm Au 2 closed, tag
colour: black

For □ 0.3...0.4 mm and Ø 0.4...0.5 mm

I
3

1,5 2,5
K
art. no. grid [mm] surface of contact no. of version
contacts
CAB 16 G ... 1.27 <0.1 µm Au 2 closed
please indicate: ... colour
S = black
L
R = red
B = blue

Technical data ➔ G 101 – 107

G 100 N
A
Technical data: PCB connectors
MK ..., MK LP 240 ..., SL 7 - 9 SLU ... SL KA 3 ...,
MK LP 241 ..., SL KG 3 ...
B MK LP 242 ...,
MK LP 40 ...,
MK LP 41 ...,
MK LP 42 ...,
MK LP 43 ...
contact material CuZn-alloy CuSn alloy CuZn-alloy
C surface contact / Ni+≥0.2µm Au/ Ni+4...6µm Sn Ni+≥0.2µm Au (se- Ni+≥0.2µm Au/ Ni
contact sleeve lective)/ Ni+4...6µm +4...6µm Sn
Sn
shock resistance 50 g
volume resistance ≤10 mΩ ≤5 mΩ ≤10 mΩ ≤20 mΩ
D vibration resistance max. 15 g
capacity between two adjacent con- ≤0,4 pF
tacts
nominal current 1.5 A 3A
nominal voltage 60 V DC 250 V AC 100 V DC 250 V AC
E test voltage 1000 V 2000 V 1000 V
insulating body material PA 4.6. GF
temperature range -40°C... +163°C/ (260°C/10 s) -40°C... +163°C/
(260°C/5 s)
class of inflammability UL 94 V-0
F specific insulation resistance >107 Ω·m
SL ... SHK ... SL ..., SL ... THR, SLP 1 ..., SLP 2 ..., SL ... LED ...
SLK ..., SL LP ... SLUP 31 ...
contact material CuZn-alloy CuSn alloy
surface contact / Ni+≥0.2µm Au Ni+≥0.2µm Au/ Ni+4...6µm Sn

G contact sleeve
volume resistance ≤10 mΩ ≤5 mΩ ≤10 mΩ ≤5 mΩ
nominal current 8.2 A/ 3 A 3A
nominal voltage 250 V AC
test voltage 1000 V 2000 V 1000 V 2000 V

H insulating body material PCT, GF PA 4.6. GF LCP

temperature range -40°C ... +105°C -40°C... +163°C/ (260°C/10 s) -40°C...+230°C/
(260°C / 10s) (260°C/10 s)
class of inflammability UL 94 V-0
specific insulation resistance >107 Ω·m >1015 Ω·cm

I SLY ... SLY ... SHK ... SLM N ..., SLV N ...,
SLV W ...
SLR ...

contact material CuSn alloy CuZn-alloy

surface contact / Ni+≥0.2µm Au/ Ni Ni+≥0.2µm Au Ni+≥0.2µm Au/ Ni+4...6µm Sn
contact sleeve +4...6µm Sn
volume resistance ≤5 mΩ ≤10 mΩ ≤5 mΩ ≤20 mΩ
K nominal current 3A 8.2 A/ 2.5 A 1.5 A 1A
nominal voltage 100 V DC 250 V AC 125 V AC 100 V AC/ 150 V DC
test voltage 500 V 1000 V 300 V 500 V
insulating body material PA 4.6. GF PCT, GF PA 4.6. GF PCT, GF
temperature range -40°C... +163°C/ -40°C ... +105°C -40°C... +163°C/ -40°C... +105°C/
L (260°C/10 s) (260°C / 10s) (260°C/10 s) (260°C/10 s)
class of inflammability UL 94 V-0
specific insulation resistance >107 Ω·m >107 Ω·m

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or

N G 101 printing errors especially technical modifications due to improvements of our products cannot be excluded.
 A
Technical data: PCB connectors
MK 06 ..., MK LP 18 ..., PO A ... SIL 1 ..., SIL 3 ...
MK 07/207 ..., MK LP 19 ...,
MK 12/212 ..., MK LP 218 ..., B
MK 13/213 ..., MK LP 219 ...
MK 17/217 ...,
MK 31/231 ...
contact material CuZn-alloy
surface contact /
contact sleeve
Ni+0.2µm Au/ Ni+4...6µm Sn Ni+≥0.2µm Au Ni+0.2µm Au/ Ni
+4...6µm Sn C
inner contact spring material CuBe-alloy
inner contact spring surface Ni+0,75µm Au Ni+0,25µm Au Ni+0,75µm Au
type internal spring 4-fingers
plugability for circuit points □0,22x0,25mm... □0,4x0,55mm/ Ø0,4...0,56mm
insert depth 2.5...3.6mm 2.5...3.4mm 2.5...3.6mm
D
insertion / drawing force 1.8 N/1.4 N
shock resistance 50 g 50 g
volume resistance ≤10 mΩ ≤10 mΩ
vibration resistance max.
capacity between two adjacent con-
15 g
≤0,4 pF
15 g
≤0,4 pF
E
tacts
nominal current 1.5 A 3A 1.5 A
nominal voltage 60 V DC 150 V DC 60 V DC
test voltage 1000 V 1000 V / 1 min. 1000 V
insulating body material PA 4.6. GF
F
temperature range -40°C... +163°C/ (260°C/10 s) -55°C... +125°C/
(260°C/10 s)
class of inflammability UL 94 V-0
specific insulation resistance >107 Ω·m
G

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or
printing errors especially technical modifications due to improvements of our products cannot be exclu-
ded.
G 102 N
A
Technical data: PCB connectors
SIL 2 ... BL 1 ..., BL 2 ..., BL LP ... BL 11 ...
BL 3 ..., BL 4 ...
B contact material CuZn-alloy CuSn alloy
surface contact / Ni+0.2µm Au/ Ni Ni+≥0.2µm Au/ Ni Ni+≥0.2µm Au (se- Ni+≥0.2µm Au (se-
contact sleeve +4...6µm Sn +4...6µm Sn lective)/ Ni+2...4µm lective)/ Ni+4...6µm
Sn (matt finished tin) Sn
inner contact spring material CuBe-alloy
C inner contact spring surface Ni+0,25µm Au
type internal spring 4-fingers fork contact spring contact
plugability for circuit points □0,22x0,25mm... □0,5...0,7mm □0,6...0,65mm
□0,4x0,55mm/
Ø0,4...0,56mm

D insert depth 2.5...3.6mm 1.5...5mm 2...4mm ≥5mm from above/

≥8mm from below
insertion / drawing force 1.8 N/1.4 N 1.5 N/1.3 N 2N/1.5N 1.5 N/0.5 N
shock resistance 50 g
volume resistance ≤10 mΩ ≤20 mΩ

E vibration resistance max.

capacity between two adjacent con-
15 g
≤0,4 pF ≤ 0,9 pF
tacts
nominal current 1.5 A 3A
nominal voltage 60 V DC 125 V AC 250 V AC

F test voltage
insulating body material
1000 V 1500 V
PPS
500 V
PA 4.6. GF
temperature range -40°C... +200°C/ (260°C/10 s) -40°C... +163°C/
(260°C/10 s)
class of inflammability UL 94 V-0
specific insulation resistance >1012 Ω·m >1012 Ω >107 Ω·m
G

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or

N G 103 printing errors especially technical modifications due to improvements of our products cannot be excluded.
 A
Technical data: PCB connectors
BL 12 ..., BL 21 ... BL 5 - 10 ... BL KG 3 ... BL 15 - 17 SMD ...,
BL 20 SMD ...,
BL 5 - 10 ... B
contact material CuSn alloy CuZn-alloy
surface contact / Ni+≥0.2µm Au (se- Ni+4...6µm Sn
contact sleeve lective)/ Ni+4...6µm
Sn
inner contact spring material CuBe-alloy C
inner contact spring surface Ni+0,75µm Au
type internal spring spring contact 6-fingers
plugability for circuit points □0,6...0,65mm □0,55...0,65mm/ Ø0,65...0,85mm
insert depth ≥6mm from above or 2.5...6mm
from below
D
insertion / drawing force 1.5 N/0.2 N 1.3N/0.3N
shock resistance 50 g 50 g
volume resistance ≤20 mΩ ≤10 mΩ ≤10 mΩ
vibration resistance max. 15 g 15 g
capacity between two adjacent con-
tacts
≤ 0,9 pF ≤ 0,3 pF ≤ 0,3 pF E
nominal current 3A
nominal voltage 250 V AC 150 V DC
test voltage 500 V 1500 V 500 V 1500 V
insulating body material LCP PA 4.6. GF PCT, GF PA 4.6. GF F
temperature range -55°C... +125°C -40°C... +163°C/ -55°C... +125°C/ -40°C... +163°C/
(260°C/10 s) (260°C/10 s) (260°C/10 s)
class of inflammability UL 94 V-0
specific insulation resistance >1012 Ω·m >107 Ω·m >107 Ω·m

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or
printing errors especially technical modifications due to improvements of our products cannot be exclu-
ded.
G 104 N
A
Technical data: PCB connectors
BL 13 ..., BL 14 ..., BL ... SHK ... MK 21/221 ..., MK 01/201 ...,
BL 18 ..., BL 19 ... MK 22/222 ..., MK 220 SMD ...,
B MK 24 SMD ... MK 228 THR ...,
MK 23/223 ...,
MK 25 SMD ...
contact material CuZn-alloy
surface contact / Ni+≥0.2µm Au Ni+4...6µm Sn
C contact sleeve
inner contact spring material CuBe-alloy CuBe-alloy
inner contact spring surface Ni+0,75µm Au Ni+0,75µm Au Ni+0,25µm Au
type internal spring 6-fingers fork contact 6-fingers 4-fingers
plugability for circuit points □0,55...0,65mm/ □0,64mm/ □1,14mm □0,55...0,65mm/ □0,22x0,25mm...
Ø0,65...0,85mm Ø0,65...0,85mm □0,4x0,55mm/
D Ø0,4...0,56mm
insert depth 2.5...6mm 3.3...5.7mm 2.5...3.6mm
insertion / drawing force 1.3N/0.3N 1.3N/0.3N 1.8 N/1.4 N
shock resistance 50 g 50 g
volume resistance ≤10 mΩ
E vibration resistance max. 15 g 15 g
capacity between two adjacent con- ≤ 0,3 pF ≤0,3 pF ≤0,4 pF
tacts
nominal current 3A 8.2 A/ 3 A 3A 1.5 A
nominal voltage 150 V DC 250 V AC 150 V DC 60 V DC
F test voltage 1500 V 1000 V 1500 V 1000 V
insulating body material PA 4.6. GF PCT, GF PA 4.6. GF
temperature range -40°C... +163°C/ -40°C ... +105°C -40°C... +163°C/ (260°C/10 s)
(260°C/10 s) (260°C / 10s)
class of inflammability UL 94 V-0
G specific insulation resistance >107 Ω·m >107 Ω·m
BLP 1 ..., BLP 2 ... BL LP ... LED ... BLY ... BLY ... SHK ...
contact material CuZn-alloy CuSn alloy CuZn-alloy
surface contact / Ni+4...6µm Sn Ni+≥0.2µm Au (se- Ni+4...6µm Sn Ni+≥0.2µm Au
contact sleeve lective)/ Ni+2...4µm
H Sn (matt finished tin)
inner contact spring material CuBe-alloy CuBe-alloy
inner contact spring surface Ni+0,75µm Au Ni+0,25µm Au
type internal spring 6-fingers fork contact 6-fingers fork contact
plugability for circuit points □0,55...0,65mm/ □0,5...0,7mm □0,45...0,5mm/ □0,45...0,5mm/
I Ø0,65...0,85mm Ø0,4...0,56mm □1,14mm
insert depth 2.5...6mm 2...4mm 2.5...3.8mm
insertion / drawing force 1.3N/0.3N 2N/1.5N 1.3N/0.3N
shock resistance 50 g 50 g
volume resistance ≤10 mΩ
K vibration resistance max. 15 g 15 g
capacity between two adjacent con- ≤ 0,3 pF ≤ 0,9 pF ≤0,7 pF
tacts
nominal current 2A 3A 2.5 A 8.2 A/ 2.5 A
nominal voltage 150 V DC 125 V AC 100 V DC 250 V AC
L test voltage 1000 V 1500 V 500 V
insulating body material PA 4.6. GF LCP PA 4.6. GF PCT, GF
temperature range -40°C... +163°C/ -40°C...+230°C/ -40°C... +163°C/ -40°C ... +105°C
(260°C/10 s) (260°C/10 s) (260°C/10 s) (260°C / 10s)
class of inflammability UL 94 V-0

M specific insulation resistance >107 Ω·m >1015 Ω·cm >107 Ω·m

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or

N G 105 printing errors especially technical modifications due to improvements of our products cannot be excluded.
 A
Technical data: PCB connectors
BLM ... BLV 2 ... BLR ... DF 2 ...
contact material
surface contact / Ni+≥0.2µm Au/ Ni
CuSn alloy
Ni+≥0.2µm Au
CuZn-alloy CuSn alloy
Ni+4...6µm Sn
B
contact sleeve +4...6µm Sn
inner contact spring material CuBe-alloy
inner contact spring surface Ni+0,25µm Au
type internal spring fork contact 3-fingers
plugability for circuit points □0,3...0,4mm □0,4mm Ø0,35...0,46mm
C
insert depth 2.5...6mm 2.5...4.2 2.5...3mm
insertion / drawing force 1.3 N/1.1 N 1.2N/0.6N
shock resistance 50 g
volume resistance
vibration resistance max.
≤10 mΩ ≤20 mΩ
15 g
D
capacity between two adjacent con- ≤0,4 pF ≤1,0 pF
tacts
nominal current 1.5 A 1A 2A
nominal voltage
test voltage
125 V AC 100 V DC
500 V
125 V AC
E
insulating body material PA 4.6. GF PCT, GF polycarbonate
temperature range -40°C... +163°C/ -40°C... +105°C/ (260°C/10 s) -40°C... +125°C
(260°C/10 s)
class of inflammability UL 94 V-0
specific insulation resistance >107 Ω·m
F
PCB thickness 0,7...0,9 mm

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or
printing errors especially technical modifications due to improvements of our products cannot be exclu-
ded.
G 106 N
A
Technical data: PCB connectors
DF OB ... CAB 5 ... CAB 4 G ... CAB 6 ...

B contact material
surface contact /
CuSn alloy
Ni+7µm Sn 0.5 µm Au/ 1 µm Au/ 0.1 µm Au/ 5 µm Sn 0.5 µm Au/ 1 µm Au/
contact sleeve 5 µm Sn 5 µm Sn
type internal spring spring contact
insert depth 4...5.5mm 4...6.1mm 5mm...plug through
nominal current 3A 1.5 A
C nominal voltage 125 V AC 250 V AC
test voltage 800 V
insulating body material PA 4.6. GF PA 66 PBT PA 66
temperature range -40°C... +125°C/ -40°C... +105°C
(260°C/10 s)
D class of inflammability UL 94 V-0
PCB thickness 1,4...1,8 mm
mounting without mounting eye-
lets
CAB 9 ... CAB 10 G S CAB 11 G S CAB 15 G S
E surface contact / 0.1 µm Au <0.1µm Au
contact sleeve
insert depth 4...5.6mm 4mm...plug through 5mm...plug through 2.2...2.4mm
nominal current 3A 1.5 A 1A
nominal voltage 500 V AC 150 V DC 100 V AC
F insulating body material PBT PA 66
temperature range -40°C... +105°C/ (re- -40°C... +105°C -40°C... +150°C
sistance to soldering
heat 235°C/30-60s)
CAB 16 G ...
G surface contact / <0.1µm Au
contact sleeve
insert depth 2.2...2.4mm
nominal current 1A
nominal voltage 100 V AC
H insulating body material PBT
temperature range -40°C... +105°C

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or

N G 107 printing errors especially technical modifications due to improvements of our products cannot be excluded.
A

N
 Shroud male headers
Multipoint connectors with and without lock
Multipoint connectors, one and two rows
PCB connectors

Shroud male headers Multipoint connectors with and without lock

• shroud male headers for lockable multipoint connector • multipoint connector for ribbon cable
• version: 2 rows, 6 contacts up to 50 contacts, • version: two rows, 6 contacts up to 50 contacts,
grid 2,54 mm grid 2,54mm
• straight, angled and for SMD technology • version without lock
• reflow solderable insulator • with polarisation
• class of flammibility acc. to UL 94 V-0

Multipoint connectors, one and two rows PCB connectors

• multipoint connector for ribbon cable • PCB connector for ribbon cable
• two rows with and without pull relief, grid 2,54, • one row in grid 2,54 mm, 4 contacts up to 20 contacts
6 contacts up to 50 contacts • two rows in grid 2,54 mm, 6 contacts up to 34 contacts
• two rows in grid 2,0 mm, 20 contacts up to 50 contacts • two rows in DIL design, grid 2,54 mm, 4 contacts up
• polarisation at the two row version to 40 contacts
• one row in grid 2,54 mm, 3 contacts up to 25 contacts
 2.54 A
Shroud-male header
Straight, two rows, shrouded
– suitable for female multipoint connector VFL ... ➔ H 11, FLMP ... ➔ H 11, PV ... ➔ H 12
– in addition they can be combined with many other ribbon cable connectors in 2.54 mm pitch B
– gold-plated plug-in area and tin-plated soldering area or completely tin plated available!

0,5
A B
9,2
4,3 C

6,4

8,9
9,2

6,4
4

Pin 1 Pin 1
2,54 2,54 0,6

art. no. no. of dim. [mm] art. no. no. of dim. [mm]
contacts A B C contacts A B C D
ASLG 06 ... 6 15.3 12.7 5.08 ASLG 20 ... 20 33.1 30.5 22.86
ASLG 08 ... 8 17.8 15.2 7.62 ASLG 26 ... 26 40.7 38.1 30.48
ASLG 10 ... 10 20.4 17.8 10.16 ASLG 34 ... 34 50.9 48.3 40.64
ASLG 12 ... 12 22.9 20.3 12.70 ASLG 40 ... 40 58.5 55.9 48.26
ASLG 14 ... 14 25.4 22.9 15.24 ASLG 50 ... 50 71.2 68.6 60.96 E
ASLG 16 ... 16 28.0 25.4 17.78
please indicate: ... surface of contact
G = gold-plated
Z = tin-plated
F
Angled, two rows, shrouded
– suitable for female multipoint connector VFL ... ➔ H 11, FLMP ... ➔ H 11, PV ... ➔ H 12
– in addition they can be combined with many other ribbon cable connectors in 2.54 mm pitch
– gold-plated plug-in area and tin-plated soldering area available!

A
B
C
G
0,5

9,2 4,5
4,3
2,54

6,4

8,9
6,4
9,2

Pin 1
2,54 0,6
Pin 1 H
art. no. no. of dim. [mm]
contacts A B C
ASLA 06 G 6 15.3 12.7 5.08
ASLA 08 G 8 17.8 15.2 7.62 I
ASLA 10 G 10 20.4 17.8 10.16
ASLA 12 G 12 22.9 20.3 12.70
ASLA 14 G 14 25.4 22.9 15.24
ASLA 16 G 16 28.0 25.4 17.78
ASLA 20 G 20 33.1 30.5 22.86 K
ASLA 26 G 26 40.7 38.1 30.48
ASLA 34 G 34 50.9 48.3 40.64
ASLA 40 G 40 58.5 55.9 48.26
ASLA 50 G 50 71.2 68.6 60.96
L

Technical data ➔ H 18 – 19
H2 N
A 2.54
Shroud-male header
SMD, two rows, shrouded
– suitable for female multipoint connector VFL ... ➔ H 11, FLMP ... ➔ H 11, PV ... ➔ H 12
B – VPE = packing unit (pieces/tube)
– gold-plated plug-in area and tin-plated soldering area or completely tin-plated available!
– in addition they can be combined with many other ribbon cable connectors in 2.54 mm pitch
1,15

0,2
B

0,5

2,54
9,2
C
4,3 0,6 1

0,6

11,1
8,9
6,4

6,4
9,2
9,7

4
1,27 2,54
10,9 2,54
A

D
Pin 1 Pin 1 Pin 1

art. no. no. of packing dim. [mm] art. no. no. of packing dim. [mm]
contacts unit A B contacts unit A B
ASL 06 SMD ... 6 32 15.3 5.08 ASL 20 SMD ... 20 15 33.1 22.86
ASL 08 SMD ... 8 27 17.8 7.62 ASL 26 SMD ... 26 12 40.7 30.48
ASL 10 SMD ... ASL 34 SMD ...
E ASL 12 SMD ...
10 24 20.4 10.16
ASL 40 SMD ...
34 9 50.9 40.64
12 21 22.9 12.70 40 8 58.5 48.26
ASL 14 SMD ... 14 19 25.4 15.24 ASL 50 SMD ... 50 7 71.2 60.96
ASL 16 SMD ... 16 17 28.0 17.78
please indicate: ... surface of contact ... packing (optional)
F G = gold-plated
Z = tin-plated
SM = bar magazine
B SM = pick and place pad and bar
magazine
B TR = pick and place pad and tape
and reel (300pcs/reel)

G ... packing (option) - additions:

ASL ... SMD ... B TR: 06 contacts; 08 contacts; 10 contacts; 26 contacts

Option for automatic assembly

8,5
4,3
H 6 10,9
2

13,7
6,4

9,7

10,9
2

2,54 13,2

I ... B SM ASL ... SMD ... ASL ... SMD ... B SM

16
Ø2

K
52,4
56

... B TR ASL 26 SMD ... B TR 4 Ø 1,5 12,9

L 16
Ø2

28,3
32

M 4 Ø 1,5 12,9
... B TR ASL 06 - 10 SMD ... B TR

Technical data ➔ H 18 – 19

N H3
 2.00 A
Shroud-male header
Straight, two rows, shrouded
– suitable for female multipoint connector PVY ... ➔ H 13
– they are also combinable with many other ribbon cable female multipoint connectors in grid 2.00 mm B
– contacts are available in gold-plated, tin-plating upon request!

5,5 A B
4 C

4,2
5,75

4,4
2,8

Pin 1 Pin 1

2 2 0,5

art. no. no. of dim. [mm] D

contacts A B C
ASLGY 10 G 10 17 15.8 8
ASLGY 20 G 20 27 25.8 18
ASLGY 26 G 26 33 31.8 24
ASLGY 40 G 40 47 45.8 38 E
ASLGY 44 G 44 51 49.8 42
ASLGY 50 G 50 57 55.8 48

Technical data ➔ H 18 – 19
H4 N
A 2.00
Shroud-male header
Straight, two rows, shrouded and with lock
– suitable for female multipoint connector PVY ... ➔ H 13
B – they are also combinable with many other ribbon cable female multipoint connectors in grid 2.00 mm
– contacts are available in gold-plated, tin-plating upon request!
B A

C 4

17
6

3
2 0,5 2

D art. no. no. of dim. [mm]

contacts A B
VSLGY 10 G 10 25.7 8
VSLGY 20 G 20 35.7 18
VSLGY 26 G 26 41.7 24
E VSLGY 40 G 40 55.7 38
VSLGY 44 G 44 59.7 42
VSLGY 50 G 50 65.7 48

Technical data ➔ H 18 – 19

N H5
 2.00 A
Shroud-male header
SMD, two rows, shrouded
– suitable for female multipoint connector PVY ... ➔ H 13
– they are also combinable with many other ribbon cable female multipoint connectors in grid 2.00 mm B
– contacts are available in gold-plated, tin-plating upon request!
5,5 A 0,6 B
4

0,95

4,2
5,75

4,4
C
Pin 1 Pin 1
6,5 2 0,5
2 0,9

7
D
art. no. no. of dim. [mm]
contacts A B
ASLY 10 SMD G 10 17 8
ASLY 20 SMD G 20 27 18
ASLY 26 SMD G 26 33 24 E
ASLY 40 SMD G 40 47 38
ASLY 44 SMD G 44 51 42
ASLY 50 SMD G 50 57 48

Technical data ➔ H 18 – 19
H6 N
A 1.27
Shroud-male header
Straight, two rows, shrouded
– suitable for female multipoint connector PVV ... ➔ H 14
B – they are also combinable with many other ribbon cable female multipoint connectors in grid 1.27 mm
– contacts are available in gold-plated, tin-plating upon request!

5,1 A B
2,3 C
C

3,5

3,55
5,4
2,4
Pin 1 Pin 1
1,27 1,27 0,4

D art. no. no. of dim. [mm]

contacts A B C
ASLGV 10 G 10 12.65 11.10 5.08
ASLGV 20 G 20 19.00 17.45 11.43
ASLGV 26 G 26 22.80 21.25 15.24
E ASLGV 40 G 40 31.70 30.15 24.13

Angled, two rows, shrouded

– suitable for female multipoint connector PVV ... ➔ H 14
– they are also combinable with many other ribbon cable female multipoint connectors in grid 1.27 mm
– contacts are available in gold-plated, tin-plating upon request!
F
B
5,1 A C
2,4 2,3
1,27
5,4

G Pin 1 Pin 1
1,27 0,4

art. no. no. of dim. [mm]

contacts A B C
H ASLAV 10 G 10 12.65 11.10 5.08
ASLAV 20 G 20 19.00 17.45 11.43
ASLAV 26 G 26 22.80 21.25 15.24
ASLAV 40 G 40 31.70 30.15 24.13

Technical data ➔ H 18 – 19

N H7
 1.27 A
Shroud-male header
Straight, two rows, shrouded and with lock
– suitable for female multipoint connector PVV ... ➔ H 14
– they are also combinable with many other ribbon cable female multipoint connectors in grid 1.27 mm B
– contacts are available in gold-plated, tin-plating upon request!
B A

2,54

11,3
6,7
Pin 1

3
Pin 1
1,27 0,4 1,27

art. no. no. of dim. [mm] D

contacts A B
VSLGV 10 G 10 20.83 5.08
VSLGV 20 G 20 27.18 11.43
VSLGV 26 G 26 30.89 15.24
VSLGV 40 G 40 39.88 24.13 E

Technical data ➔ H 18 – 19
H8 N
A 1.27
Shroud-male header
SMD, two rows, shrouded
– suitable for female multipoint connector PVV ... ➔ H 14
B – they are also combinable with many other ribbon cable female multipoint connectors in grid 1.27 mm
– contacts are available in gold-plated, tin-plating upon request!

5,1 2,2 B

0,4
C

5,7
6,1
Pin 1
Pin 1
5,8 1,27 A

D art. no. no. of dim. [mm]

contacts A B
ASLV 10 SMD G 10 6.35 5.08
ASLV 20 SMD G 20 12.70 11.43
ASLV 26 SMD G 26 16.51 15.24
E ASLV 40 SMD G 40 25.40 24.13

SMD, two rows, shrouded and with lock

– suitable for female multipoint connector PVV ... ➔ H 14
– they are also combinable with many other ribbon cable female multipoint connectors in grid 1.27 mm
– contacts are available in gold-plated, tin-plating upon request!
F A 6,7
B
2,54

11,4
3,6
5,7

6,2
G
1,27

Pin 1 1,27 0,4 7,5

1,27 1
8,5
3,5

H
art. no. no. of dim. [mm]
contacts A B
VSLV 10 SMD G 10 20.83 5.08
VSLV 20 SMD G 20 27.18 11.43
I VSLV 26 SMD G 26 30.89 15.24
VSLV 40 SMD G 40 39.88 24.13

Technical data ➔ H 18 – 19

N H9
 2.54
A
Female connector
One row
– excess length of the ribbon cable to the case at ≥1 mm!
B

C
art. no. no. of dim. [mm]
contacts A B C D
FV 03 ... 3 15.24 7.62 5.08 8.89
FV 04 ... 4 17.78 10.16 7.62 11.43
D
FV 05 ... 5 20.32 12.70 10.16 7.62
FV 06 ... 6 22.86 15.24 5.08 16.51
FV 07 ... 7 25.40 17.78 15.24 19.05
FV 08 ... 8 27.94 20.32 17.78 21.59 E
FV 10 ... 10 33.02 25.40 22.86 26.67
FV 12 ... 12 38.10 30.48 27.94 31.75
FV 13 ... 13 40.64 33.02 30.48 34.29
FV 14 ... 14 43.18 35.66 33.02 36.83
FV 16 ... 16 48.26 40.64 38.10 41.91
F
FV 17 ... 17 50.80 43.18 40.64 44.45
FV 18 ... 18 53.34 45.72 43.18 46.99
FV 20 ... 20 58.42 50.80 48.26 52.07
FV 24 ... 24 68.58 60.96 58.42 62.23 G
FV 25 ... 25 71.12 63.50 60.96 64.77
please indicate: ... surface of contact
G = gold-plated
Z = tin-plated
annotation: IDC-pattern 2.54mm H
cross-section: AWG 28...30 = 0,09...0,05 mm²
insulation diameter: ≤1,1 mm
suitable ribbon cable round con- AWG 28 = massive or strand
ductor flat cable:
recommended connector pins: □ 0,635 mm I

Technical data ➔ H 18 – 19
H 10 N
 2.54
A
Female connector
Two rows, with polarisation
– lockable female multipoint connector, suitable for shrouded male header ASL ...
B

art. no. no. of dim. [mm] art. no. no. of dim. [mm]
contacts A B contacts A B
D VFL 06 ... 6 23.58 9.56 VFL 20 ... 20 41.36 27.34
VFL 08 ... 8 26.12 12.10 VFL 26 ... 26 48.98 34.96
VFL 10 ... 10 28.66 14.64 VFL 34 ... 34 59.14 45.12
VFL 12 ... 12 31.20 17.18 VFL 40 ... 40 66.76 52.74
VFL 14 ... 14 33.74 19.72 VFL 50 ... 50 79.46 65.44
E VFL 16 ... 16 36.28 22.26
please indicate: ... surface of contact
G = gold-plated
Z = tin-plated

F – suitable for shrouded male header ASL ...

– excess length of the ribbon cable to the case at ≥1 mm!

art. no. no. of dim. [mm] art. no. no. of dim. [mm]
contacts A B contacts A B
H FLMP 06 ... 6 10.97 9.56 FLMP 20 ... 20 28.75 27.34
FLMP 08 ... 8 13.51 12.10 FLMP 26 ... 26 36.37 34.96
FLMP 10 ... 10 16.05 14.64 FLMP 34 ... 34 46.53 45.12
FLMP 12 ... 12 18.59 17.18 FLMP 40 ... 40 54.15 52.74
I FLMP 14 ... 14 21.13 19.72 FLMP 50 ... 50 66.85 65.44
FLMP 16 ... 16 23.67 22.26
please indicate: ... surface of contact
G = gold-plated
Z = tin-plated
K annotation: IDC-pattern 1.27mm
cross-section: AWG 28...30 = 0,09...0,05 mm²
insulation diameter: ≤1,1 mm
suitable ribbon cable round con- AWG 28 = massive or strand
ductor flat cable:
L

Technical data ➔ H 18 – 19

N H 11
 2.54
A
Female connector
Two rows, with polarisation
– suitable for shrouded male header ASL ...
– excess length of the ribbon cable to the case at ≥1 mm! B
6,1 1,1
3,81 1,27

2,54
C

13,5
2,54
B
A 3,8
art. no. no. of suitable strain dim. [mm] art. no. no. of suitable strain dim. [mm]
contacts relief A B contacts relief A B
PV 06 G 6 ZEPV 06 12.2 5.08 PV 26 G 26 ZEPV 26 37.6 30.48 D
PV 10 G 10 ZEPV 10 17.3 10.16 PV 34 G 34 ZEPV 34 47.8 40.64
PV 14 G 14 ZEPV 14 22.4 15.24 PV 40 G 40 ZEPV 40 55.4 48.26
PV 16 G 16 ZEPV 16 24.9 17.78 PV 50 G 50 ZEPV 50 68.1 60.96
PV 20 G 20 ZEPV 20 30.0 22.86
surface of contact: gold-plated
E
annotation: IDC-pattern 1.27mm
cross-section: AWG 28...30 = 0,09...0,05 mm²
insulation diameter: ≤1,1 mm
suitable ribbon cable round con-
ductor flat cable:
AWG 28 = massive or strand F
6,1 1,1
3,81 1,27

ZEPV
G
2,54

17
13,5

2,54
B
A 3,8
PV ... G

H
11,6

ZEPV

A
art. no. no. of dim. [mm] art. no. no. of dim. [mm]
contacts A B contacts A B
ZEPV 06 6 12.2 5.08 ZEPV 26 26 37.6 30.48 I
ZEPV 10 10 17.3 10.16 ZEPV 34 34 47.8 40.64
ZEPV 14 14 22.4 15.24 ZEPV 40 40 55.4 48.26
ZEPV 16 16 24.9 17.78 ZEPV 50 50 68.1 60.96
ZEPV 20 20 30.0 22.86
K

Technical data ➔ H 18 – 19
H 12 N
 2.00
A
Female connector
Two rows
– Suitable for ASLGY ..., ASLY ... SMD and VSLGY ...
B – Protrusion length of the ribbon cable to the case ≥1 mm!

B A 4,2

8,6
2 4,8

art. no. no. of dim. [mm]

D contacts A B
PVY 10 S 10 15.2 8
PVY 20 S 20 25.1 18
PVY 26 S 26 31.2 24
PVY 40 S 40 45.3 38
E PVY 44 S 44 49.3 42
PVY 50 S 50 55.1 48
surface of contact: selective gold-plated
annotation: IDC-pattern, 1mm

F recommended connector pins: □ 0,5 mm

Technical data ➔ H 18 – 19

N H 13
 1.27
A
Female connector
Two rows
– Suitable for ASLGV ..., ASLAV ..., VSLGV ..., ASLV ... SMD und VSLV ... SMD
– Protrusion length of the ribbon cable to the case ≥1 mm! B

1,27
B A 3,05

6,35
1,27 4,1

art. no. no. of dim. [mm]

contacts A B D
PVV 10 G 10 10.54 5.08
PVV 20 G 20 16.89 11.43
PVV 26 G 26 20.70 15.24
PVV 40 G 40 29.59 24.13
surface of contact: gold-plated E
annotation: IDC-pattern 0.635mm
recommended connector pins: □ 0,4 mm

Technical data ➔ H 18 – 19
H 14 N
A 2.54
Printed circuit connector
– excess length of the ribbon cable to the case at ≥1mm!

C
art. no. no. of dim. [mm]
contacts A B C
SBAU 1 04 Z 4 17.78 10.16 7.62

D SBAU 1 06 Z 6 22.86 15.24 12.70

SBAU 1 08 Z 8 27.94 20.32 17.78
SBAU 1 10 Z 10 33.02 25.40 22.86
SBAU 1 12 Z 12 38.10 30.48 27.94
SBAU 1 14 Z 14 43.18 35.56 33.02
E SBAU 1 16 Z 16 48.26 40.64 38.10
SBAU 1 17 Z 17 50.80 43.18 40.64
SBAU 1 18 Z 18 53.34 45.72 43.18
SBAU 1 20 Z 20 58.42 50.80 48.26
surface of contact: tin-plated
F annotation: IDC-pattern 2.54mm
insulation diameter: ≤1,1 mm
suitable ribbon cable round con- AWG 28 = massive or strand
ductor flat cable:

G – excess length of the ribbon cable to the case at ≥1mm!

A
6 B

5,4
8,25

H
3,3

0,3 2,54 0,65

2,54 C

art. no. no. of dim. [mm]

I contacts A B C
SBAU 06 Z 6 12.9 7.8 5.08
SBAU 10 Z 10 18.0 12.9 10.16
SBAU 14 Z 14 23.0 18.0 15.24
SBAU 16 Z 16 25.6 20.5 17.78
K SBAU 20 Z 20 30.7 25.6 22.86
SBAU 26 Z 26 38.3 33.2 30.48
SBAU 34 Z 34 48.5 43.4 40.64
surface of contact: tin-plated

L annotation: IDC-pattern 1.27mm

insulation diameter: ≤1,1 mm
suitable ribbon cable round con- AWG 28 = massive or strand
ductor flat cable:

Technical data ➔ H 18 – 19

N H 15
 2.54 A
Printed circuit connector
Design DIL
– excess length of the ribbon cable to the case at ≥1mm!
B
A
E B

5,4 max
C
3,2
0,35 2,54
0,45
C

art. no. no. of dim. [mm]

contacts A B C D E
KK 04 Z 4 8.0 5.1 2.54 D
KK 06 Z 6 10.3 7.6 5.08
KK 08 Z 8 13.0 10.2 7.62
KK 10 Z 10 15.4 12.7 10.16
KK 12 Z 12 18.0 15.3 5.08 7.62 11.0
KK 14 Z 14 20.5 17.8 15.24
E
KK 16 Z 16 23.0 20.3 17.78
KK 18 Z 18 25.6 22.9 20.32
KK 20 Z 20 28.1 25.4 22.86
KK 24 Z 24 33.0 30.5 27.94 F
KK 28 Z 28 38.1 35.6 33.02 15.24 18.7
KK 40 Z 40 53.3 50.8 48.26
surface of contact: tin-plated
annotation: IDC-pattern 1.27mm
insulation diameter: ≤1,1 mm G
suitable ribbon cable round con- AWG 28 = massive or strand
ductor flat cable:

Technical data ➔ H 18 – 19
H 16 N
 2.54
A
Accessories for flat ribbon cable and application tools
Flat ribbon cable - Spacing 2.54 mm - suitable for connectors FV, SBAU 1
B

0,95
C 2,54
(n-1) x 2,54

art. no. no. of contacts

BK 01 32 32
D
Bench press
– height without handle: 28 cm, weight: 9.02 kg
– the bench press VBK 1 connects all contacts of IDC connector types FLMP, FV, KK, PV, PVY, SB, VFL, DS/DB BK 09-37 in one
simple operation
– the contacts separate the insulation of the flat ribbon cable, whereas a gas-tight and corrosion-proof connection is effected by the
E construction of the contacts form

G
art. no.
VBK 1

H Accessories, suitable for ribbon cable connector

– exchangable crimping dies for any indicated types available
art. no. suitable for male connectors and female headers
KK W KK
PV W FLMP/ PV/ VFL
I PVY W PVY
SB W SB
D W 9 37 D-Sub (9-37 contacts)

Technical data ➔ H 18 – 19

N H 17
 A
Technical data: IDC-connectors
ASL ..., ASLG ... ASLGY ..., ASLAV ..., ASLGV ..., FV ...
ASLY ... SMD G, ASLV ... SMD G,
VSLGY ... VSLGV ..., B
VSLV ... SMD G
surface contact / Ni+≥0.2µm Au/ Ni Ni+≥0.2µm Au Ni+≥0.2µm Au/ Ni
contact sleeve +4...8µm Sn +5...10µm Sn
contact material CuSn alloy Cu-alloy CuSn alloy
creeping current resistance KC 175 nach DIN
53480
C
creepage ≥1,1mm VDE0110 1,4mm VDE0110
air gap ≥0,8 mm VDE0110 1mm VDE0110
nominal current 1A 1.5 A 1A 2A
nominal voltage 250V AC insulation
group A, according to
150 V DC 100 V DC 250V AC insulation
group A, according to
D
VDE0110 VDE0110
test voltage 500 V AC 300 V AC 500 V AC
insertion / drawing force ≥0.3N ... ≤0.7N per
contact
cycles of operation ≥50 according to DIN E
41640
insulating body material PPS PBT PC/ colour: RAL 7032
temperature range -40°C ... +200°C -40°C ... +105°C (260°C / 10s) -55°C... +125°C
(260°C / 10s)
class of inflammability UL 94 V-0 F
specific insulation resistance >107 Ω·m
cross-section AWG 28...30 =
0,09...0,05 mm²
FLMP ..., VFL ... PV ... PVY ... S PVV ... G
surface contact /
contact sleeve
Ni+≥0.2µm Au/ Ni
+5...10µm Sn
Ni+≥5µm Sn/ Ni
+≥0.2µm Au
contact area: Ni
+>0.1µm Au/ con-
contact area: Ni
+>0.1µm Au
G
nection area: Ni
+0.5...2.5µm Sn
contact material CuSn alloy Cu-alloy
creeping current resistance KC 175 nach DIN KC 250
53480 H
creepage 1,4mm VDE0110
air gap 1mm VDE0110
nominal current 1A 2A 1.5 A
nominal voltage 250V AC insulation group A, according to 150 V DC 100 V DC
VDE0110 I
test voltage 500 V AC
insertion / drawing force ≥0.3N ... ≤0.7N per contact ≥0.5 ... ≤1.8N per contact
cycles of operation ≥50 according to DIN 200 to DIN41651
41640
insulating body material PC/ colour: RAL 7032 PBT, schwarz K
temperature range -55°C... +125°C -40°C... +105°C
class of inflammability UL 94 V-0
specific insulation resistance >107 Ω·m >1010 Ω·m
cross-section AWG 28...30 = 0,09...0,05 mm²
L

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or
printing errors especially technical modifications due to improvements of our products cannot be exclu-
ded.
H 18 N
A
Technical data: IDC-connectors
SBAU ... Z KK ... Z, SBAU 1 ... Z BK 01 32

B surface contact /
contact sleeve
Ni+5µm Sn Ni+5...10µm Sn

contact material CuSn alloy

creeping current resistance KC 175 nach DIN 53480
creepage ≥0,7mm VDE 0110
air gap ≥0,5 mm VDE 0110
C nominal current 1A 2A
nominal voltage 250V AC insulation group A, according to VDE0110 300 Veff max.
test voltage 500 V AC
insulating body material PC colour: RAL 7032

D temperature range -55°C... +125°C -30°C... +105°C

class of inflammability UL 94 V-1 UL 94 V-0
specific insulation resistance >1012 Ω·m
conductor 7 x Ø 0,127 mm
cross-section AWG 28...30 = 0,09...0,05 mm² AWG 28/~0,089 mm²
E capacity ≤ 65 pF/m symmetrical
conductor resistance ≤230mΩ/m
characteristic impedance 170 Ω symmetrisch

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or

N H 19 printing errors especially technical modifications due to improvements of our products cannot be excluded.
A

N
 USB & RJ 45 connectors
D-Sub connectors
D-Sub hoods
D-Sub accessories

USB & RJ 45 connectors D-Sub connectors

• USB 2.0 type A and typ B • with Wire Wrap, solder cup and dip soldering
• USB 2.0 mini type B connection
• USB 2.0 micro type B • with plastic angle and rivet, earthing plate, snap-in clip
• USB 3.0 type A • with metal angle and rivet
• USB 3.1 type C
• RJ 45

D-Sub hoods D-Sub accessories

• design with large cable space • cut-out covers
• hoods with self-cutting threaded bolts • HF-dense seal caps
• hoods with quick fastener • HF seals
• compact hoods with cable outlet on the side • dust covers
 A
USB connectors
USB 2.0 type A sockets
– for PCB mounting
– in THT design B
– industrial standard
* PCB edge (PCB)

14,5
14,3
13,1
C
2,3

1,5
Ø
5,7

13,14
0,9
7

7
2
Ø

2,8
3,4
5,8
10,3 2
10,3 2,7
D
0,25 0,6

art. no. no. of contacts type connection type packing

USB 2 A 90 4 USB Typ A THT (soldering) Tray
E
surface of contact: selective gold-plated
7
19,25 5,7

5,44
1,5
Ø
0,9
F
14,5

13,1

2,45
0,7

3,7 2 2 2 0,27

11,65 7

11,65 0,4 0,25

G
art. no. no. of contacts type connection type packing
USB 2 A 90 V 4 USB Typ A THT (soldering) Tray
surface of contact: selective gold-plated
14,1
13,1
6,7
5,7 H
2,3
Ø
14,9

0,9
13,14
18,8

2
7

I
3

2,7
0,75 0,25
3,9
art. no. no. of contacts type connection type packing
USB 2 A 180 4 USB Typ A THT (soldering) Tray K
surface of contact: selective gold-plated

Technical data ➔ I 41 – 42
I2 N
A
USB connectors
USB 2.0 type B sockets
– for PCB mounting
B – in THT design
– industrial standard
* PCB edge (PCB)

16,1 12,8
C

2,5 4,77
10,6

12,04
2,
Ø

92
0,
2,8

Ø
D

4
6,5

0,3
10,2 1,7 0,6 10,2 2,7 2

art. no. no. of contacts type connection type packing

USB 2 B 90 4 USB Typ B THT (soldering) Tray
E surface of contact: selective gold-plated

12,04
2,5 4,77

11,15
15,55

3,2
F

2,71
3

9
2,
12

0,
Ø

Ø
14,6
3,55
4,5

0,25 0,6
3,9

G art. no. no. of contacts type connection type packing

USB 2 B 180 4 USB Typ B THT (soldering) Tray
surface of contact: selective gold-plated

USB 2.0 type B mini sockets

H – for PCB mounting
– in THT design
– industrial standard
* PCB edge (PCB)

I 9 7,7 1,9
2,05
3,9

7,3

3,2
0,7
1,8

K 3,75 0,2 0,3

3,75 3,75 1,2

art. no. no. of contacts type connection type packing

L USB MN 2 B 5 USB Typ B THT (soldering) Tray
surface of contact: selective gold-plated

Technical data ➔ I 41 – 42

N I3
 A
USB connectors
USB 2.0 type A sockets
– for PCB mounting
– in SMD design B
– industrial standard
* PCB edge (PCB)

14,5
14,4
13,1 4
C
2,3
Ø

1,2
0,25
5,7

7
7

2
0,9
2

3,4
5,8
10,3
0,6
10,3 6,5 D

art. no. no. of contacts type connection type packing

USB 2 A SMD 4 USB Typ A SMD Tray
surface of contact: selective gold-plated E
USB 2.0 type B sockets
– for PCB mounting
– in SMD design
– industrial standard
* PCB edge (PCB) F
9,58 6,04
16 12
0,5

3
1,25
0,7
10,6

1,4
G
0,25

0,3
1,5

5,5
17
Ø

3,75
2

9
5,04 Ø 1,15 9 3
9,58
16 16
H
art. no. no. of contacts type connection type packing
USB 2 B SMD 4 USB Typ B SMD Tray
surface of contact: selective gold-plated

USB 2.0 type B mini sockets I

– for PCB mounting
– in SMD design
– industrial standard
* PCB edge (PCB)

9,2 7,7 0,4 2,9

0,5 K
0,8
0,25

3,9

5,5

1
4,4
8,9

3,2

Ø
0,5

4,4
L
2,95

Ø 0,8
5,85
2,5
9,9
5,5

art. no. no. of contacts type connection type packing

USB MN 2 B SMD 5 USB Typ B SMD Tray M
surface of contact: selective gold-plated

Technical data ➔ I 41 – 42
I4 N
A
USB connectors
USB 2.0 type B micro sockets
– for PCB mounting
B – in SMD design
– industrial standard
* PCB edge (PCB)
1,2
1,4

0,65
C
8 7,4

0,4
0,5
0,3

2,85
0,3
2,35

5,6
3

4,3
9,8

2,6
6,2

4
7,8 0,8

0,6
Ø

D Ø 0,7
1,9
1,45 3,35
art. no. no. of contacts type connection type packing
USB MC 2 B SMD 5 USB Typ B SMD tape and reel
surface of contact: selective gold-plated
E

Technical data ➔ I 41 – 42

N I5
 A
USB connectors
USB 3.0 type A sockets
– for PCB mounting
– in THT design B
– industrial standard

14,7 8

1,5

7
0,
16,45 13,1 2

3
C

2,
Ø
1,3
5,7

2
7,3

0,5
2,5 2

2,8

11,8
7
4,4 0,25 0,5 13,14
11,8
D
art. no. no. of contacts type connection type packing
USB 3 A 90 9 USB Typ A THT (soldering) Tray
surface of contact: selective gold-plated
7,3 E
25,7 5,7
2,1 1,4

0,8
8
2

7
0,
14,7
13,1

Ø
5,42
F

1,8
0,5

0,8
2,5 2 2,5
10,7
0,45 1,8
8,05 5,15 10,7 0,25

art. no. no. of contacts type connection type packing G

USB 3 A 90 V 9 USB Typ A THT (soldering) Tray
surface of contact: selective gold-plated

USB 3.1 type C sockets

– for PCB mounting
– in THR / SMD design H
– industrial standard
10
3,5

I
4,7

0,25
3,65 0,28 9,2
0,15 Ø 0,6

Z: 0,5
9
1
K
0,81

7,45 2,5
1,6
1,1

6,1 0,5
0,35

Z
5,6

0,4
0,65

L
0,7
Ø Ø0
0, ,6
45 5
Ø

1
0,
1,3

65
1,8

0,5
1,15

1,15
0,9

art. no. no. of contacts type connection type packing

USB 31 C 24 USB Typ C THR / SMD tape and reel M
surface of contact: selective gold-plated

Technical data ➔ I 41 – 42
I6 N
A
RJ 45 connectors
RJ 45 sockets
– for PCB mounting
B – in THT design
– industrial standard

17,6

1,27
20,5 15,2 3,3
Ø

2,54
11,43
0,7
15 0,9
3,7 Ø

4
6,35 2,54
D 10,2
0,35
0,4

art. no. no. of contacts type connection type packing

RJ 45 U 10 RJ 45 THT (soldering) Tray
surface of contact: selective gold-plated
E

1,27
2,54
18,8 16,5 3,3
Ø

11,43
15,3
12

F Ø
0,9

6,35
5,25 0,35 0,4 3
2,54

G art. no. no. of contacts type connection type packing

RJ 45 G 10 RJ 45 THT (soldering) Tray
surface of contact: selective gold-plated
15,63
16,2 11,43

H
25,2
LED 1 LED 2
3,05

2,54
1,27 3,4
Ø
1,6
2,54

Ø
13,6

3,3

0,9
Ø

I
4,83
3,3

0,45 10,75
0,5 5,84
11,43 0,35 10,92

art. no. no. of contacts type connection type packing

K RJ 45 LED 8 RJ 45 THT (soldering) Tray

LED 1: yellow
LED 2: green
surface of contact: selective gold-plated
L

Technical data ➔ I 41 – 42

N I7
 A
D-Sub standard connectors
Male and female headers
9 - 37 pol. 50 pol.
15,4 A
B
12,4 5,69 B

1
7

7
11,6

11,6
4,6 C

4,6
2,84 Ø 0,6

art. no. design dim. [mm] art. no. design dim. [mm]
A B A B
DS 09 T ... 30.8 25.0 DS 37 T ...
male
69.5 63.5 D
DS 15 T ... male 39.2 33.3 DS 50 T ... 67.0 61.1
DS 25 T ... 53.1 47.0
9 - 37 pol. 50 pol.
15,4 A
12,4 5,69 B
E

1
7

7
11,6

11,6
4,6

4,6

2,84 Ø 0,6 F
art. no. design dim. [mm] art. no. design dim. [mm]
A B A B
DB 09 T ... 30.8 25.0 DB 37 T ... 69.5 63.5
female
DB 15 T ... female 39.2 33.3 DB 50 T ... 67.0 61.1
DB 25 T ... 53.1 47.0
G
please indicate: ... type of mounting (optional)
RC M3 = snap-in-clip with M3
RC UN = snap-in-clip with UNC 4-40
RCS M3 = snap-in-clip and screwing bolt with M3
RCS UN = snap-in-clip and screwing bolt with UNC 4-40 H
Overview type of mounting (optional)
... RC M3 ... RCS M3
... RC UN ... RCS UN

5 I
PCB
RC PCB
UNC 4-40
UNC 4-40
Ø 3,1

Ø 3,1

M3/
M3/

Ø3 Ø3

6 6
RCS K
9,2 9,2

Technical data ➔ I 41 – 42
I8 N
A
D-Sub standard connectors
Male and female headers
B 9 - 37 pol. 50 pol.
A
15,4
12,4 5,69 B

1
7

7
11,6

11,6
C

1,8
1,8 2,84
art. no. design dim. [mm] art. no. design dim. [mm]
A B A B
DS 09 L ... 30.8 25.0 DS 37 L ... 69.5 63.5
D DS 15 L ... male 39.2 33.3 DS 50 L ...
male
67.0 61.1
DS 25 L ... 53.1 47.0
9 - 37 pol. 50 pol.
A
15,4
12,4 B
5,69
E

1
7

7
11,6

11,6
1,8

1,8

F art. no. design

2,84
dim. [mm] art. no. design dim. [mm]
A B A B
DB 09 L ... 30.8 25.0 DB 37 L ... 69.5 63.5
female
DB 15 L ... female 39.2 33.3 DB 50 L ... 67.0 61.1
DB 25 L ...
G 53.1 47.0
please indicate: ... type of mounting (optional)
GN M3 = threaded rivet with M3
GN UN = threaded rivet with UNC 4-40
GNS M3 = threaded rivet and screwing bolt with M3
GNS UN = threaded rivet and screwing bolt with UNC 4-40
H
Overview type of mounting (optional)
... GN M3 ... GNS M3
... GN UN ... GNS UN
5

I ... L ... ... L ...

UNC 4-40

UNC 4-40
M3/

M3/
Ø5

Ø5

GN 2,65 2,65
GNS
K

Technical data ➔ I 41 – 42

N I9
 A
D-Sub standard connectors
Male headers with IP protection
– IP 67 protected
– solder bucket connection B
21,2 A
9,3 B

5,55
9,55
C
5,55 UNC-4-40

art. no. design dim. [mm]

A B D
DS 09 L IP 67 40.0 25.0
DS 15 L IP 67 male 48.4 33.3
DS 25 L IP 67 62.0 47.0

Female headers with IP protection E

– IP 67 protected
– solder bucket connection

21,2 A
8 B

F
5,55
9,55
5,55

UNC-4-40

art. no. design dim. [mm] G

A B
DB 09 L IP 67 40.0 25.0
DB 15 L IP 67 female 48.4 33.3
DB 25 L IP 67 62.0 47.0
H

Technical data ➔ I 41 – 42
I 10 N
A
D-Sub standard connectors
Male and female headers
B 12,4
15,4
5,69
A
B

1
7
7
11,6

11,6
C
13,4

13,4
9 - 37 pol. 50 pol.
2,84 0,6
art. no. design dim. [mm] art. no. design dim. [mm]
A B A B
DS 09 WW 3 ... 30.8 25.0 DS 37 WW 3 ... 69.5 63.5
D DS 15 WW 3 ... male 39.2 33.3 DS 50 WW 3 ...
male
67.0 61.1
DS 25 WW 3 ... 53.1 47.0
A
12,4 15,4 B

1
E
7

7
11,6

11,6
13,4

13,4

9 - 37 pol. 50 pol.

F art. no. design

2,84

dim. [mm]
5,69

art. no. design

0,6

dim. [mm]
A B A B
DB 09 WW 3 ... 30.8 25.0 DB 37 WW 3 ... 69.5 63.5
female
DB 15 WW 3 ... female 39.2 33.3 DB 50 WW 3 ... 67.0 61.1
G DB 25 WW 3 ... 53.1 47.0
please indicate: ... type of mounting (optional)
GN M3 = threaded rivet with M3
GN UN = threaded rivet with UNC 4-40
GNS M3 = threaded rivet and screwing bolt with M3
GNS UN = threaded rivet and screwing bolt with UNC 4-40
H
Overview type of mounting (optional)
... GN M3 ... GNS M3
... GN UN ... GNS UN

I
5
... WW 3 ... ... WW 3 ...
UNC 4-40

UNC 4-40
M3/

M3/
Ø5

Ø5

GN
K GNS
2,65 2,65

Technical data ➔ I 41 – 42

N I 11
 A
D-Sub standard connectors with mounting bracket
M3/UNC 4-40

7,4

3,2
3,2
Ø 0,6

C
Ø 3,3
11,7
art. no. design fixing part
DS WE 3 ... plastic angle with earthing plate, threaded rivet M3
male
DS WE 4 ... plastic angle with earthing plate, threaded rivet UNC 4-40
DB WE 3 ... plastic angle with earthing plate, threaded rivet M3
female
DB WE 4 ... plastic angle with earthing plate, threaded rivet UNC 4-40 D
please indicate: ... no. of contacts
9 15 25 37

M3/UNC 4-40

7,4

3,2
Ø3

3,2
PCB 1,6 mm Ø 0,6
11,7 F
art. no. design fixing part
DS WR 3 ... plastic angle with earthing plate, threaded rivet M3, snap-on clip
male
DS WR 4 ... plastic angle with earthing plate, threaded rivet UNC 4-40, snap-on clip
DB WR 3 ... plastic angle with earthing plate, threaded rivet M3, snap-on clip
DB WR 4 ...
female
plastic angle with earthing plate, threaded rivet UNC 4-40, snap-on clip G
please indicate: ... no. of contacts
9 15 25 37

Technical data ➔ I 41 – 42
I 12 N
A
D-Sub connectors High Density
Male and female headers
– our D-Sub connectors HD are loaded with turned precision contacts
B – with shielding springs

1,98
A
1,98
B

5
C

8,7

2,5

1,2

1
12,4
art. no. no. of design dim. [mm]
D contacts A B
HD S 15 L ... 15 30.8 25.0
HD S 26 L ... 26 male 39.2 33.3
HD S 44 L ... 44 53.1 47.0
casing frame: steel, tin plated
E 1,98
A
1,98
B
5
8,7

F
2,5

1,2

1
12,4

art. no. no. of design dim. [mm]

contacts A B
HD B 15 L ... 15 30.8 25.0
G HD B 26 L ... 26 female 39.2 33.3
HD B 44 L ... 44 53.1 47.0
please indicate: ... type of mounting (optional)
GN M3 = threaded rivet with M3
GN UN = threaded rivet with UNC 4-40
H GNS M3 = threaded rivet and screwing bolt with M3
GNS UN = threaded rivet and screwing bolt with UNC 4-40
casing frame: steel, tin plated

Overview type of mounting (optional)

I ... GN M3 ... GNS M3
... GN UN ... GNS UN
5
... L ... ... L ...

K
UNC 4-40

UNC 4-40
M3/

M3/
Ø5

Ø5

GN 2,65 2,65
GNS

Technical data ➔ I 41 – 42

N I 13
 A
D-Sub connector for flat ribbon cable
Male and female headers

11 E C
D
B

Ø 3,1
2,84
1,37

1,2

12,2
20,9

21
C

6
B
A
9,1
art. no. no. of design dim. [mm]
contacts A B C D E
DS BK 09 9 30.6 25.0 10.96 17.9 16.1
DS BK 15 15
male
39.0 33.3 19.33 26.2 23.9 D
DS BK 25 25 52.8 47.0 33.13 39.9 38.1
DS BK 37 37 69.2 63.5 49.70 56.3 54.7

D
E

1,2
12,2

5,69
12,2 C
23,1

21
E B
A
F
art. no. no. of design dim. [mm]
contacts A B C D E
DS BK 50 50 male 66.8 61.1 44.2 54 68.6
D

11 E C
G

Ø 3,1
2,84

1,37
5,85

1,2

12,2
20,9

21

B
7,9 A H
art. no. no. of design dim. [mm]
contacts A B C D E
DB BK 09 9 30.6 25.0 10.96 16.3 16.1
DB BK 15 15 39.0 33.3 19.33 24.5 23.9
female
DB BK 25 25 52.8 47.0 33.13 38.5 38.1 I
DB BK 37 37 69.2 63.5 49.70 54.8 54.7

D
1,2

10,8
5,69

10,8 C

K
23,6

21

15,4 15,4 B
E
A
art. no. no. of design dim. [mm]
contacts A B C D E L
DB BK 50 50 female 66.8 61.1 44.2 52.4 68.6

Technical data ➔ I 41 – 42
I 14 N
A
D-Sub mixed layout connectors
Order example (case and assembly type)
B DSM / DBM 7W2 L GN UN

connector Contact pattern connection type assembly type internal thread

(DSM = D-Sub male header mixed layout (see overview) signal contact (see overview) (UNC 4-40)
DBM = D-Sub female header mixed layout) (L = solder bucket connection)
C case assembly type (optional)

Overview contact pattern

– the contact pattern is valid for male headers
– for using socket connectors the hole pattern has to be mirrored
D
... 2W2C ... ... 3W3 ... ... 5W5 ... ... 8W8 ...

E ... 7W2 ... ... 9W4 ... ... 21WA4 ...

... 13W3 ... ... 25W3 ...

F
... 17W2 ... ... 27W2 ...

Order example (mixed layout contacts)

G
HAS 10 TA

high-power contacts current connection type mixed layout contacts

(HAS = high-power contacts male) (10 A) (see overview)

H mixed layout contacts

Overview mixed layout contacts, connection type

solder bucket connection crimp connection PCB connection PCB connection
I straight straight straight angled
... L ... C ... T

male
K

female
L

Technical data ➔ I 41 – 42

N I 15
 A
D-Sub mixed layout connectors
Overview assembly type (optional)
... GN M3 ... GNS M3 B
... GN UN ... GNS UN
5
... L ... ... L ...

UNC 4-40

UNC 4-40
C

M3/

M3/
Ø5

Ø5
GN 2,65 2,65
GNS

... RC M3 ... RCS M3

... RC UN ... RCS UN
5

PCB
RC PCB D

UNC 4-40
UNC 4-40
Ø 3,1

Ø 3,1

M3/
M3/

Ø3 Ø3
6 6
RCS
9,2 9,2
E
... MW M3 ... MWS M3
... MW UN ... MWS UN
5

... TA ... ... TA ...

F
UNC 4-40

UNC 4-40
M3/

M3/
(8,7)

(8,7)
7,4

7,4
MWS
3,2
3,2

MW
Ø 3,1 Ø 3,1

10,67 10,67
(11,94)
13,9
(11,94)
13,9
G
(15,8) (15,8)

Technical data ➔ I 41 – 42
I 16 N
A
D-Sub mixed layout connectors
Male headers
– gold-plated signal contacts, straight
B – equipped with turned precision contacts
– for power cables up to AWG 16
– combinable with high-power contacts HAS ... ➔ I 27 - I 28

30,8

1,3
C 25 12,5

12,4

6
Ø 3,1 5,6

art. no. design signal contacts high-power contacts

D DSM 2W2C L ... male 0 max. 2

39,2

1,3
33,3 12,5

E
12,4

6
Ø 3,1 5,6

art. no. design signal contacts high-power contacts

DSM 3W3 L ... male 0 max. 3
F
53,1

1,3
47 12,5
12,4

6
G Ø 3,1 5,6

art. no. design signal contacts high-power contacts

DSM 5W5 L ... male 0 max. 5

H 39,2

1,3
33,3 15,1
12,4

Ø 3,1 8,2

I art. no. design signal contacts high-power contacts

DSM 7W2 L ... male 5 max. 2

69,5
1,3

63,5 12,5

K
12,4

Ø 3,1 5,6

art. no. design signal contacts high-power contacts

L DSM 8W8 L ... male 0 max. 8
please indicate: ... type of mounting (optional)
GN M3 = threaded rivet with M3
GN UN = threaded rivet with UNC 4-40
GNS M3 = threaded rivet and screwing bolt with M3
GNS UN = threaded rivet and screwing bolt with UNC 4-40
M casing frame: steel, tin plated

Technical data ➔ I 41 – 42

N I 17
 A
D-Sub mixed layout connectors

B
53,1

1,3
47 15,1

12,4

6
Ø 3,1 8,2

art. no. design signal contacts high-power contacts C

DSM 9W4 L ... male 5 max. 4

53,1

1,3
47 15,1

D
12,4

6
Ø 3,1 8,2

art. no. design signal contacts high-power contacts

DSM 13W3 L ... male 10 max. 3
E
53,1

1,3
47 15,1
12,4

6
Ø 3,1 8,2 F
art. no. design signal contacts high-power contacts
DSM 17W2 L ... male 15 max. 2

69,5 G

1,3
63,5 15,1
12,4

Ø 3,1 8,2

art. no. design signal contacts high-power contacts

H
DSM 21WA4 L ... male 17 max. 4

69,5
1,3

63,5 15,1
I
12,4

Ø 3,1 8,2

art. no. design signal contacts high-power contacts

DSM 25W3 L ... male 22 max. 3 K
please indicate: ... type of mounting (optional)
GN M3 = threaded rivet with M3
GN UN = threaded rivet with UNC 4-40
GNS M3 = threaded rivet and screwing bolt with M3
GNS UN = threaded rivet and screwing bolt with UNC 4-40 L
casing frame: steel, tin plated

Technical data ➔ I 41 – 42
I 18 N
A
D-Sub mixed layout connectors

B
69,5

1,3
63,5 15,1

12,4

6
Ø 3,1 8,2

C art. no. design signal contacts high-power contacts

DSM 27W2 L ... male 25 max. 2
please indicate: ... type of mounting (optional)
GN M3 = threaded rivet with M3
GN UN = threaded rivet with UNC 4-40
D GNS M3 = threaded rivet
GNS UN = threaded rivet
and screwing bolt with M3
and screwing bolt with UNC 4-40
casing frame: steel, tin plated

Technical data ➔ I 41 – 42

N I 19
 A
D-Sub mixed layout connectors
Male headers
– gold-plated signal contacts, straight
– equipped with turned precision contacts B
– with PCB connection, straight
– combinable with high-power contacts art. HAS ... ➔ I 27 - I 28

39,2

1,3
33,3 6,9
C
12,4

6
Ø 3,1 5,2

art. no. design signal contacts high-power contacts

DSM 7W2 T ... male 5 max. 2
D

53,1

1,3
47 6,9

E
12,4

6
Ø 3,1 5,2

art. no. design signal contacts high-power contacts

DSM 9W4 T ... male 5 max. 4
F
53,1

1,3
47 6,9
12,4

Ø 3,1 5,2
G
art. no. design signal contacts high-power contacts
DSM 13W3 T ... male 10 max. 3

53,1
H
1,3
47 6,9
12,4

Ø 3,1 5,2

art. no. design signal contacts high-power contacts I

DSM 17W2 T ... male 15 max. 2
please indicate: ... type of mounting (optional)
RC M3 = snap-in-clip with M3
RC UN = snap-in-clip with UNC 4-40
RCS M3 = snap-in-clip and screwing bolt with M3 K
RCS UN = snap-in-clip and screwing bolt with UNC 4-40
casing frame: steel, tin plated

Technical data ➔ I 41 – 42
I 20 N
A
D-Sub mixed layout connectors
Male headers
– gold-plated signal contacts, angled
B – equipped with turned precision contacts
– with PCB connection, angled
– combinable with high-power contacts HAS ... ➔ I 27 - I 28

39,2

1,3
33,3 12,5
C

4,4
12,4

6
Ø 3,1 9,4
Ø 0,6 2,54

art. no. design signal contacts high-power contacts

D DSM 7W2 TA ... male 5 max. 2
53,1

1,3
47 12,5

4,4
12,4

6
Ø 3,1 9,4
Ø 0,6 2,54

art. no. design signal contacts high-power contacts

DSM 9W4 TA ... male 5 max. 4
F 53,1

1,3
47 12,5
4,4
12,4

6
G Ø 0,6
Ø 3,1 9,4
2,54

art. no. design signal contacts high-power contacts

DSM 13W3 TA ... male 10 max. 3
53,1
H

1,3
47 12,5
4,4
12,4

Ø 3,1 9,4
Ø 0,6 2,54

I art. no. design signal contacts high-power contacts

DSM 17W2 TA ... male 15 max. 2
please indicate: ... type of mounting (optional)
MW M3 = metal angle with M3
MW UN = metal angle with UNC 4-40
K MWS M3 = metal angle screwing bolt with M3
MWS UN = metal angle and screwing bolt with UNC 4-40
casing frame: steel, tin plated

Technical data ➔ I 41 – 42

N I 21
 A
D-Sub mixed layout connectors
Female headers
– gold-plated signal contacts, straight
– equipped with turned precision contacts B
– for power cables up to AWG 16
– combinable with high-power contacts HAB ... ➔ I 27 - I 28

30,8

1,3
25 12,5
C
12,4

6,1
Ø 3,1 5,6

art. no. design signal contacts high-power contacts

DBM 2W2C L ... female 0 max. 2
D

39,2

1,3
33,3 12,5

E
12,4

6,1
Ø 3,1 5,6

art. no. design signal contacts high-power contacts

DBM 3W3 L ... female 0 max. 3
F
53,1

1,3
47 12,5
12,4

6,1

Ø 3,1 5,6
G
art. no. design signal contacts high-power contacts
DBM 5W5 L ... female 0 max. 5

39,2
H
1,3
33,3 15,1
12,4

6,1

Ø 3,1 8,2

art. no. design signal contacts high-power contacts I

DBM 7W2 L ... female 5 max. 2

69,5
1,3

63,5 12,5

K
12,4

6,1

Ø 3,1 5,6

art. no. design signal contacts high-power contacts

DBM 8W8 L ... female 0 max. 8 L
please indicate: ... type of mounting (optional)
GN M3 = threaded rivet with M3
GN UN = threaded rivet with UNC 4-40
GNS M3 = threaded rivet and screwing bolt with M3
GNS UN = threaded rivet and screwing bolt with UNC 4-40
casing frame: steel, tin plated
M

Technical data ➔ I 41 – 42
I 22 N
A
D-Sub mixed layout connectors

B
53,1

1,3
47 15,1

12,4

6,1
Ø 3,1 8,2

C art. no. design signal contacts high-power contacts

DBM 9W4 L ... female 5 max. 4

53,1

1,3
47 15,1

D
12,4

6,1
Ø 3,1 8,2

art. no. design signal contacts high-power contacts

DBM 13W3 L ... female 10 max. 3
E
53,1

1,3
47 15,1
12,4

6,1
F Ø 3,1 8,2

art. no. design signal contacts high-power contacts

DBM 17W2 L ... female 15 max. 2

G 69,5

1,3
63,5 15,1
12,4

6,1

Ø 3,1 8,2

H art. no. design signal contacts high-power contacts

DBM 21WA4 L ... female 17 max. 4

69,5
63,5 15,1 1,3
I
12,4

6,1

Ø 3,1 8,2

art. no. design signal contacts high-power contacts

K DBM 25W3 L ... female 22 max. 3
please indicate: ... type of mounting (optional)
GN M3 = threaded rivet with M3
GN UN = threaded rivet with UNC 4-40
GNS M3 = threaded rivet and screwing bolt with M3
L GNS UN = threaded rivet and screwing bolt with UNC 4-40
casing frame: steel, tin plated

Technical data ➔ I 41 – 42

N I 23
 A
D-Sub mixed layout connectors

69,5
B

1,3
63,5 15,1

12,4

6,1
Ø 3,1 8,2

art. no. design signal contacts high-power contacts C

DBM 27W2 L ... female 25 max. 2
please indicate: ... type of mounting (optional)
GN M3 = threaded rivet with M3
GN UN = threaded rivet with UNC 4-40
GNS M3 = threaded rivet
GNS UN = threaded rivet
and screwing bolt with M3
and screwing bolt with UNC 4-40
D
casing frame: steel, tin plated

Technical data ➔ I 41 – 42
I 24 N
A
D-Sub mixed layout connectors
Female headers
B – gold-plated signal contacts, straight
– equipped with turned precision contacts
– with PCB connection, straight
– combinable with high-power contacts HAB ... ➔ I 29 - I 30

C 39,2

1,3
33,3 6,9

12,4

6,1
Ø 3,1 5,2

D art. no. design signal contacts high-power contacts

DBM 7W2 T ... female 5 max. 2

53,1

1,3
47 6,9
E
12,4

6,1
Ø 3,1 5,2

art. no. design signal contacts high-power contacts

F DBM 9W4 T ... female 5 max. 4

53,1

1,3
47 6,9
12,4

G
6,1

Ø 3,1 5,2

art. no. design signal contacts high-power contacts

DBM 13W3 T ... female 10 max. 3
H
53,1

1,3
47 6,9
12,4

6,1

Ø 3,1 5,2
I
art. no. design signal contacts high-power contacts
DBM 17W2 T ... female 15 max. 2
please indicate: ... type of mounting (optional)
RC M3 = snap-in-clip with M3
K RC UN = snap-in-clip with UNC 4-40
RCS M3 = snap-in-clip and screwing bolt with M3
RCS UN = snap-in-clip and screwing bolt with UNC 4-40
casing frame: steel, tin plated

Technical data ➔ I 41 – 42

N I 25
 A
D-Sub mixed layout connectors
Female headers
– gold-plated signal contacts, angled
– equipped with turned precision contacts B
– with PCB connection, angled
– combinable with high-power contacts HAB ... ➔ I 27 - I 28

39,2

1,3
33,3 12,5
C

4,4
12,4

6,1
Ø 3,1 9,4
2,54

art. no. design signal contacts high-power contacts

DBM 7W2 TA ... female 5 max. 2
D
53,1

1,3
47 12,5

4,4
12,4

6,1
Ø 3,1 9,4
2,54

art. no. design signal contacts high-power contacts

DBM 9W4 TA ... female 5 max. 4
53,1
F

1,3
47 12,5
4,4
12,4

6,1

Ø 3,1 9,4
2,54
G
art. no. design signal contacts high-power contacts
DBM 13W3 TA ... female 10 max. 3
53,1
H
1,3
47 12,5
4,4
12,4

6,1

Ø 3,1 9,4
2,54

art. no. design signal contacts high-power contacts I

DBM 17W2 TA ... female 15 max. 2
please indicate: ... type of mounting (optional)
MW M3 = metal angle with M3
MW UN = metal angle with UNC 4-40
MWS M3 = metal angle screwing bolt with M3 K
MWS UN = metal angle and screwing bolt with UNC 4-40
casing frame: steel, tin plated

Technical data ➔ I 41 – 42
I 26 N
A
High-power contacts, loose
Pin contacts
– 10 A / 20 A / 40 A
B – combinable with cases DSM ... ➔ I 17-I 21

– straight, with solder bucket connection

22,1
10,4

C
0,7

ØA
ØB
Ø 3,6

Ø 4,78
Ø 5,6
D
art. no. current [A] dim. [mm]
A B
HAS 10 L 10 1.8 2.55
HAS 20 L 20 2.8 3.70
E HAS 40 L 40 4.8 5.60

– straight, with connection crimp

20,85
9,2

7,6
ØA
ØB
Ø 3,6

Ø 4,78

G
Ø 5,6

art. no. current [A] dim. [mm]

A B
HAS 10 C 10 1.8 2.55

H HAS 20 C
HAS 40 C
20 2.8 3.70
40 4.8 5.60

– straight, with PCB connection

16,95
5,3
I
ØA
Ø 3,6

Ø 4,78
Ø 5,6

K
art. no. current [A] dim. [mm]
A
HAS 10 T 10 2.0
HAS 20 T 20 2.6
L HAS 40 T 40 3.2

Technical data ➔ I 41 – 42

N I 27
 A
High-power contacts, loose
– angled, with PCB connection (tin-plated)
0,4
B

Ø 3,6

11
Ø 4,78

Ø 5,5
C
6,3
ØA
art. no. current [A] dim. [mm]

HAS 10 TA 10
A
2.00
D
HAS 20 TA 20 2.85
HAS 40 TA 40 3.75

Technical data ➔ I 41 – 42
I 28 N
A
High-power contacts, loose
Socket contact
– 10 A / 20 A / 40 A
B – combinable with cases DBM ... ➔ I 22-I 26

– straight, with solder bucket connection

21,9
10,4
0,7
C

ØA
ØB
Ø 4,78
Ø 5,6
D
art. no. current [A] dim. [mm]
A B
HAB 10 L 10 1.8 2.55
HAB 20 L 20 2.8 3.70
E HAB 40 L 40 4.8 5.60

– straight, with connection crimp

20,7
9,2

F
7,6

ØA
ØB
Ø 4,78
Ø 5,6

G art. no. current [A] dim. [mm]

A B
HAB 10 C 10 1.8 2.55
HAB 20 C 20 2.8 3.70
H HAB 40 C 40 4.8 5.60

– straight, with PCB connection

16,8
5,3

I
ØA
Ø 4,78
Ø 5,6

K art. no. current [A] dim. [mm]

A
HAB 10 T 10 2.0
HAB 20 T 20 2.6
HAB 40 T 40 3.2
L

Technical data ➔ I 41 – 42

N I 29
 A
High-power contacts, loose
– angled, with PCB connection (tin-plated)
0,4
B

11
Ø 4,78
Ø 5,5
C
6,3
ØA
art. no. current [A] dim. [mm]

HAB 10 TA 10
A
2.00
D
HAB 20 TA 20 2.85
HAB 40 TA 40 3.75

Technical data ➔ I 41 – 42
I 30 N
A
D-Sub in SMD-mounting
Male and female headers
– packing: tape and reel (150 pcs/reel); reel outer diameter 330 mm
B 2 x UNC 4-40 B

Ø 2,1
Y
2,74 4

3,2
12 Z

6,3

10,1
4
0,8

3
12,4

6,8
C Ø2
1,1 0,7
9 R6 6
B Z
A 5,4 PCB-LAYOUT
art. no. no. of dim. [mm]
contacts A B Y Z
D DS 09 SMD TR 9 30.8 25.0 10.98
1.37
DS 15 SMD TR 15 39.2 33.3 19.20
DS 25 SMD TR 25 53.1 47.0 33.12
1.38
DS 37 SMD TR 37 69.5 63.5 49.68
B
E
2 x UNC 4-40

Ø 2,1
Y
2,74 4

3,2
12 Z
6,3

10,1
4
0,8

3
12,4

6,8
1,1 0,7
Ø2
F B 9 R6
Z
6

A 5,4 PCB-LAYOUT
art. no. no. of dim. [mm]
contacts A B Y Z
DB 09 SMD TR 9 30.8 25.0 10.98
1.37
G DB 15 SMD TR 15 39.2 33.3 19.20
DB 25 SMD TR 25 53.1 47.0 33.12
1.38
DB 37 SMD TR 37 69.5 63.5 49.68

Technical data ➔ I 41 – 42

N I 31
 A
D-Sub hoods
– E = max. diameter of the cable entry in mm
– threaded bolt UNC 4-40
– large cable space with few components B
– 9-37 contacts can be mounted in series in (C = 3 HP) grid, thus especially suitable for 19" technology

2,8
E
(max.)

D
B
A
art. no. no. of
contacts A B
dim. [mm]
C D E
D
DH 09 ... 9 31.5 25 15.2 31 8.5

E
(max.)

2,8
D
C

art. no. no. of

A

dim. [mm]
F
contacts A B C D E
DH 15 ... 15 40.0 33.3 33.5 8.5
DH 25 ... 25 53.5 47.0 15.2 38.0
11.0
DH 37 ... 37 70.0 63.5
40.0 G
DH 50 ... 50 67.5 61.1 18.2 12.0
please indicate: ... surface of case
S = plastic, black
M = plastic, metallized

4 - 13

I
D

UNC 4-40 C
B
A
K
art. no. dim. [mm]
A B C D
DH M 09 UN4 31.2 25.00 39.9
DH M 15 UN4 39.5 33.30
15
41.5
L
DH M 25 UN4 53.4 47.04 48.6
DH M 37 UN4 69.7 63.50 50.0

Technical data ➔ I 41 – 42
I 32 N
A
D-Sub hoods

D
4 - 13
C UNC 4-40 C
B
A

art. no. dim. [mm]

A B C D
DH MA 09 UN4 31.0 25.00 36.3
D DH MA 15 UN4 39.5 33.30
14.5
DH MA 25 UN4 53.2 47.04 40.3
DH MA 37 UN4 69.7 63.50

E E max.

D
F B
UNC 4-40 C

art. no. dim. [mm]

A B C D E
G DH ... 09 UN4 32.0 25.00 39.6 7.0
DH ... 15 UN4 40.2 33.30 41.2 9.2
16.4
DH ... 25 UN4 54.0 47.04 45.0 11.0
DH ... 37 UN4 70.6 63.50 50.0 12.0
please indicate: ... surface of case
H K = plastic, black
KM = plastic, metallized

Technical data ➔ I 41 – 42

N I 33
 A
D-Sub hoods
IP 67 protected
– straight cable outlet with pre-assembled strain relief
– threaded bolt UNC 4-40 B
C

D (max.)

B
22
A

art. no. dim. [mm]

A B C D
D
DH 09 L IP 67 40.8 77 25.00 10
DH 15 L IP 67 49.5 79 33.30
12
DH 25 L IP 67 63.0 87 47.04

D-Sub hoods with quick-action locking system

– straight and side-gated cable outlet
E
DH SV 09 ... / DH SV 15 ... DH SV 25 ... / DH SV 37 ... / DH SV 50 ...

F
C

44,2

44,2
B

A A
art. no. no. of dim. [mm]
contacts A B C G
DH SV 09 ... 9 33.0 25.0
DH SV 15 ... 15 41.3 33.3
15.4
DH SV 25 ... 25 55.0 47.0
DH SV 37 ...
DH SV 50 ...
37 71.5 63.5
H
50 69.1 61.1 18.4
please indicate: ... surface of case
S = plastic, black
M = plastic, metallized

Accessories – locking pin for hood – hood connection I

– 2 locking pins including locking plates
Ø 2,95
8,5
6,4

K
0,8

23,6
12

9,2
6,4

R1

art. no. L
RS HH

Technical data ➔ I 41 – 42
I 34 N
A
D-Sub hoods
Accessories – locking pin for plug connector – hood connection
– 2 latch Pins including locking ring for connectors with thread M3/UNC 4-40
B Ø 2,8

3
0,8
max. 1

7,8

5,2
C

15
SW 4,5

5
M 3 / UNC 4- 40
art. no. type of thread art. no. type of thread
RS SH 3 RS SH 4
D M3 UNC 4-40

Accessories – locking pin for plug connector – hood connection

– 2 locking pins including spring washer, washer and nut for exisiting connector with through hole

0,8

2,2
4,8
E

20
10
F M3
art. no.
RS SH D

Cable sleeve - quick-release hood DH SV ...

– cable sleeves are supplied with chamfers, which are adequate to a diameter-grading of 0.5 mm; they can be cut off depending on the
G exisiting diameter of the cable.
– for cable diameters 3...9 mm

Ø9

H Ø 3,8

32,6
12

2,6

14

12

I art. no. no. of contacts

KT SV 9

Technical data ➔ I 41 – 42

N I 35
 A
D-Sub hoods
D-Sub-hoods-compact
9-50 contacts
B

– width C - 3 HP
– version 9-37 pins can be mounted in series in 3 HP grid, thus especially suitable for 19" technology
– metallized version with excellent shielding against electrical and magnetic alternating fields D
– integrated dust protective shroud
– captive latching screws with UNC 4-40 treads
– 2 side cable outputs:
40° exit (9-50 contacts)
90° exit (25-50 contacts)
– E = max. diameter of the cable bushing in mm E
13
,6 40°
C
Ø

.)
(m E
ax

F
D

B
A

art. no. no. of dim. [mm] G

contacts A B C D E
DH 09 ... 9 31.5 25.0
37 8.5
DH 15 ... 15 40.0 33.3
15.2
DH 25 ... 25 53.5 47.0
DH 37 ... 37 70.0 63.5 41
11.0 H
DH 50 ... 50 67.8 61.1 18.2 12.0
please indicate: ... surface of case
K = plastic, black
KM = plastic, metallized
I

Technical data ➔ I 41 – 42
I 36 N
A
D-Sub accessories
Suitable cable bushing
– protects the cable against damage by buckling
B Ø 10,7

Ø7

39,3
Ø 3,4

46
23
C
Ø 4,8 Ø 5,3
KT 0915 Ø 9,2 KT 2550 Ø 11
art. no. for no. of contacts art. no. for no. of contacts
KT 0915 9/ 15 KT 2550 25/ 37/ 50

D Cover for D-Sub cut outs in front and back panel

– suitable for EMC application, closed on one side
– blank covers for exact sealing of unused D-Sub cut outs in front- and backpanels, size and form are like D-Sub housings
C D
5

E 12,2

7,8

11
B 11,2
A

F art. no. dim. [mm]

A B C D
BADM 09 30.8 25.0 19.2 16.3
BADM 15 39.3 33.3 27.5 24.5
BADM 25 53.0 47.0 41.2 38.3
G BADM 37 69.4 63.5 57.7 54.8
casing frame: tin-plated

– plastic cover, blank, for blind D-Sub and other connector cutouts in front and rear panels
– simple mounting by clamping
H B
2
3,45

7
C

14,75
3,5
I A
3,45

art. no. dim. [mm]

A B C
BADK 09 32.0 25.0
BADK 15 40.3 33.3
K BADK 25 54.0 47.0
14.0

BADK 37 70.5 63.5

BADK 50 68.0 61.0 16.5

Technical data ➔ I 41 – 42

N I 37
 A
D-Sub accessories
Screw fastening, mounted
– 2 screw fastenings incl. spacer, washer, nut
– please add a V to the corresponding art. no. ... B
art. no.

C
... V

Screw fastening, loose

– 2 separate screw fasteners, with washer and nut
D
art. no.
UNC 4/40

5
5
E

8
M3
V2
material: screw - brass nickel-plated/ screw-nut - steel nickel-plated/ steel-washer galvanized F
Screw fastening for assembly of cases, separate
– 2 screw fastenings incl. spacer, washer, nut
art. no.
SW 4,5

4-40 UNC G
2,6 min

5
9,5
2

4-40 UNC
Ø 3,7
H
VG 2
material: steel-washer tin-plated/ screw and steel-screw-nut verzinnt

Technical data ➔ I 41 – 42
I 38 N
A
D-Sub accessories
HF-tight caps, male and female headers
– prevent HF-radiation at open interfaces
B

5,45
C

12,65
A

art. no. design colour dim. [mm] art. no. design colour dim. [mm]
D A A
HFK S 09 32.9 HFK B 09 32.9
HFK S 15 male blue 41.3 HFK B 15 female red 41.3
HFK S 25 55.7 HFK B 25 55.7
E annotation: internal 50 µm electromagnetical protective coating

HF-seals
– as seal between plug and housing

15,2
B
A
0,5
G
art. no. dim. [mm]
A B
HFD 09 30.8 25.0
H HFD 15 39.4 33.3
HFD 25 53.4 47.0
HFD 37 70.7 63.5
annotation: extremely low transition resistance
I

Technical data ➔ I 41 – 42

N I 39
 A
Dust protection caps
For male headers
B

11,2

8,3
A 6,1 B C
art. no. dim. [mm]
A B
SSK S 09 22.5 18.2
SSK S 15 30.6 26.5 D
SSK S 25 43.7 39.8
SSK S 37 60.3 56.2

For female headers

E
9,8

A 7 B
F

art. no. dim. [mm]

A B
SSK B 09 22.3 17.00 G
SSK B 15 30.6 25.00
SSK B 25 44.1 38.65
SSK B 37 60.7 55.30
annotation: extremely low transition resistance
H

Technical data ➔ I 41 – 42
I 40 N
A
Technical data: USB / RJ / D-Sub connectors
USB 2 A 180, USB 2 B 180 USB MN 2 B, USB 2 A SMD,
USB 2 A 90, USB MN 2 B SMD USB 2 B SMD
B USB 2 A 90 V,
USB 2 B 90
contact material CuSn alloy
surface contact / Ni+≥0.2µm Au (selective)
contact sleeve
C cycles of operation 1500 5000 1500
nominal current 0.5 A
nominal voltage 40 VRMS/VDC
insulating body material PA, white
temperature range -25°C ... +85°C (230°C / 5s) -40°C ... +105°C -25°C ... +85°C
D (260°C / 10s) (260°C / 10s)
class of inflammability UL 94 V-0
USB MC 2 B SMD USB 3 A 90, USB 31 C RJ 45 G, RJ 45 U
USB 3 A 90 V
contact material CuSn alloy

E surface contact /
contact sleeve
Ni+≥0.2µm Au (selective)

cycles of operation 10000 1500 10000 750

nominal current 1 A for Pin 1-5 / 1.8 A 0.5 A 5 A for VBUS Pin / 1A
for Pin 1, 5 / 0.5 A for 1.25 A for VCONN Pin
Pin 2-4
F nominal voltage 40 VRMS/VDC 125 VRMS/VDC
insulating body material
temperature range -30°C ... +80°C -25°C ... +85°C 40°C ... +85°C -55°C ... +105°C
(260°C / 10s) (230°C / 5s) (260°C / 10s) (230°C / 5s)
class of inflammability UL 94 V-0
G RJ 45 LED DB ... L IP 67, DS ..., HD B ..., HD S ...
DS ... L IP 67 DB ...
contact material CuSn alloy Cu-alloy
surface contact / Ni+≥0.2µm Au (se- hard gold plated over nickel
contact sleeve lective)
H cycles of operation 750
quality class / cyces of operation quality class 2 = 200 cycles of operation
volume resistance ≤10 mΩ before strain, ∆R 10 mΩ after strain
according to DIN 41652. part 2 (MIL-
C-24308)

I air gap and creep distance cont.-contact <1mm/

contact-earth <1mm
cont.-contact
<0.6mm/ contact-
earth <0.6mm
nominal current 1A 5A (20°C) 3A (20°C)
nominal voltage 125 VRMS/VDC 125 V AC 125 V DC 60 V AC
test voltage 1000 V
K insulating body material PBT, GF
temperature range 0°C ... +70°C -55°C... +125°C
class of inflammability UL 94 V-0
insulation resistance ≥5 GΩ

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or

N I 41 printing errors especially technical modifications due to improvements of our products cannot be excluded.
 A
Technical data: USB / RJ / D-Sub connectors
DS BK ..., DBM ..., DBM ... TA, HAB ... C, HAB ... L, HAB ... TA, HAS ... TA
DB BK ... DSM ..., DSM ... TA HAB ... T, HAS ... C,
HAS ... L, HAS ... T B
contact material Cu-alloy
surface contact / hard gold plated over nickel-phosphorus- Ni+≥0.2µm Au Ni+≥0.2µm Au (se-
contact sleeve nickel gold-surface/ lective)
(≥0.1µm Au over

quality class / cyces of operation quality class 3 = 50

2...4µm chem. NiP)
quality class 2 = 200 cycles of operation
C
cycles of operation
volume resistance ≤10 mΩ
air gap and creep distance <0.9mm according to
VDE0110
nominal current 1A at AWG 28/ 1.5A signal contact: ≤5 A/ power contact: ≤10 A / 20 A / 40 A D
at AWG 26 power contact: ≤10
A / 20 A / 40 A
nominal voltage 125 V AC
test voltage 1000 V DC 1000 V
insulating body material PBTP, GF Polyester, GF E
temperature range -55°C... +125°C -55°C... +150°C
class of inflammability UL 94 V-0
insulation resistance 1 GΩ ≥5 GΩ
DH M ... UN4, DH K ... UN4, DH ... L IP 67 DH ... S,
DH MA ... UN4 DH KM ... UN4 DH ... M, DH SV ... F
insulating body material zinc die-casting nickel- ABS
plated
temperature range -40°C... +120°C -40°C... +85°C
class of inflammability UL 94 V-0
surface of case zinc die-casting nickel- plastic, black/ plastic,
plated metallized
plastic, black plastic, black/ plastic,
metallized
G
KT SV DH ... K BADM ... BADK ...
DH ... KM
insulating body material EPTR ABS ABS
class of inflammability UL 94 V-0 (at thickness UL 94 V-0 UL 94 V-0
≥3mm), UL 94 V-1 H
surface of case plastic, black/ plastic, metal plastic, grey
metallized
HFK S ... HFD ... SSK S ...
HFK B ... SSK B ...
insulating body material ABS Silicone, filled with silver-plated Polyethylene I
coper particles
temperature range -35°C ... +85°C
class of inflammability UL 94 V-0

The information given in this catalogue were provided and examined carefully. Nevertheless mistakes or
printing errors especially technical modifications due to improvements of our products cannot be exclu-
ded.
I 42 N
 Brackets for PCI
Brackets for AT and similar
Custom-specific brackets
Equipped brackets

Brackets for PCI Brackets for AT and similar

• with or without fixing tab • with or without fixing tab
• standard cut-outs • standard cut-outs
• custom-specific cut-outs • custom-specific cut-outs
• custom-specific printings • custom-specific printings

Custom-specific brackets Equipped brackets

• double width • equipped with D-Sub
• special width • equipped with LED
• with printing • equipped with custom-specific components
• bracket (Retainer) for PCI cards
 A
Index Bracket-Groups

15
B
9 9 9 15
9 15
9 9 25
9 15 25
9 9
9 15 25 15 25

9
C

PCI 7 9 12 13 14 15 17 18
page D
KHPC 8 9 10 11 11 12 13 14 15 15 16 17 18

E
37
37 50

PCI 18 21 21 22 23
page
KHPC 19 20 20 21 22 22 23 24 24 G

= one or more additional

cut-outs
L

K2 N
A
Brackets for PC

Brackets with fixing strap and without cutout

B 21,3

12,25
5,88
21,6

6,35
4,5
16,8
28,5

12,5
11,75
2,54 2,83
C

4,4
18,42

11,01
10,9

11,05
0,5

4,3
7,2
24
11,75 2,54 16 max. 12,5 18,42
21,6
7,85

7,62
3,95

3,7
D 3

71,12

78,74
0,8
77,55

85,4

102,55
121,5
2,87
120,8

104,4
0,8
11,05
E
M3

7,62
7,85

10,16

31,75
3
24,5

10,2 9,57
8,6
19

F 5° 4,1 5°
4,13
2,88

11,75
14,3

7,62
7,01
7,25

18,42 17,17
21,3
art. no. art. no.
PCI 0 L KHPC 0 L
G Bracket without fixing strap and without cutout
21,6
21,3

12,5
H 2,54 2,83
5,88

4,4

4,5
18,42
12,25

6,35
12,25 12,5

7,2
2,54
21,6 18,42
6,88
0,5

3,95

3,7

4,32
I
0,8 0,8
102,57

102,55
120,8

121,5

K
7,25

10,16
10,2
11,75

L 5° 4,1
14 5° 4,13
2,88
11,75
7,62

18,42 7,01
17,17
21,3
art. no. art. no.
PCI 0 O KHPC 0 O
M material: stainless steel (V 2 A)
material thickness: 0.8 mm

N K3
 A
Low Profile bracket for PC
Low Profile bracket with fixing strap and without cutout
– with or without fixing tap; standard cutouts
– customer-specific cutouts and printing; double width (special widths) on request B

4,5

7,15
17,56

12,7
C

13,5
22

5,77
26

1,8
3,41 13,5

9,94
D

7,94
M3

45,96

53,9
80,1
11,94
68,33
0,8

E
10,2

20,39
14,43

7,94
9,39

4,11 5°
14,31 F
18,42

art. no.
PCI LP ... L

Low Profile bracket without fixing strap and without cutout 4,5 G
17,56
12,7

22
H
7,15

0,8
1,8

12,7
3,41

I
78,26

80,1

0,8
11,91

10,2 K

5°
4,11
14,31
18,42 L
art. no.
PCI LP ... O
material: steel sheet, hot-dip aluminised
material thickness: 0.8 mm M

K4 N
A
Dimensional drawing for PCBs

B
Ø 3,17

85,4
4,83
D
7,5
15

Dimensions to fix the PCI L ... - bracket to the PCB

E

F
Ø 2,7

78,74
G
3,81

H 7,62
21,59

Dimensions to fix the KHPC L ... - bracket to the PCB

M
On request also available with D-Sub connector!

N K5
 A
Retainers for PCI-cards
– suitable for all ISA-versions

14,27
B
5,08 32,05 1,8

10,16
C
Ø 2,5

D
1,07

76,84
97,16

89,54

Ø 2,5
F

10,16
G
6
5,08 24,47

H
21,58 6,5

5,08
14,27

1,8

I
1,57
6

3,4
1,57

10,16

25,08
K
art. no.
PCI R1
class of inflammability: UL 94 V-0
material: polycarbonate L

K6 N
A
Brackets for PC
PCI 055 ... PCI 004 ... PCI 005 ...

B 9,21 9,21 9,21

D-Sub 9-pol.
D-Sub 9-pol.
9

D-Sub 9-pol.

Ø 3,2
D

82,95
70,45
73,3

Ø 3,2
61,2

60,8

57,95
48,7

48,3
Ø 3,2
36,2

E
PCI 006 O

8,42

F
D-Sub 9-pol.

G
Ø 3,2
91,25
78,75
66,25

If you do not find a suitable bracket,

N K7 please use the PCI / KHPC design sheet

at the end of section "K".
 83,65 54
71,15 41,5
58,65 29

please indicate:
9
Ø 3,2 Ø 3,2

KHPC 094 O
KHPC 011 O
Brackets for PC

D-Sub 9-pol.

9,21

9,21
D-Sub 9-pol.

... fixing strap

88,5 58,8 105,75
76 46,3 93,25
63,5 33,8 80,75

L = with fixing straps

O = without fixing strap
Ø 3,2 Ø3 Ø 3,2

KHPC 096 O
KHPC 013 O
KHPC 002 O

8,5

9,21
D-Sub 9-pol. D-Sub 9-pol.

9,21
D-Sub 9-pol.

99 74 83,65
86,5 61,5 71,15
74 49 58,65

Ø 3,5 Ø 3,2 Ø 3,2

KHPC 008 O
KHPC 010 ...
KHPC 003 ...

9,2

9,21
9,21

D-Sub 9-pol. D-Sub 9-pol. D-Sub 9-pol.

104,5 76,48 54
92 63,98 41,5
79,5 51,48 29

Ø 3,2 Ø 3,5
KHPC 093 L

Ø3

KHPC 014 O
KHPC 007 O

9,21

9,21

K8
D-Sub 9-pol. D-Sub 9-pol. D-Sub 9-pol.

9,21
I

L
F
E
C
B
A

K
D

H
G

N
M
 I

L
F
E
C
B
A

K
D

H
G

N
M

K9
9

9
9
9
Brackets for PC

96,3
83,8
71,3 104,25
56,3 91,75 66,75
43,8 79,25 54,25
31,3 67,32 41,75

Ø3
8,42
PCI 011 ...
Ø 3,2

KHPC 131 L
Ø 3,2
KHPC 016 O

Ø 13
10

10
D-Sub 9-pol. D-Sub 9-pol.

9,21
D-Sub9-pol. D-Sub9-pol.

99,05
86,55
74,05
66,05 85,5
53,55 73
41,05 60,5

8,42

Ø3,2
PCI 013 ...
Ø 3,1
KHPC 095 O

10

D-Sub9-pol.
D-Sub 9-pol.
D-Sub9-pol.

101,4

at the end of section "K".

88,9
76,4
58,8 99,75
46,3 87,25
74,75

If you do not find a suitable bracket,

33,8

please use the PCI / KHPC design sheet

PCI 039 O
9,21
Ø 3,2
KHPC 017 ...

Ø3
10

D-Sub 9-pol.
D-SUB 9-pol.
 110,75 100

98,25 87,5
85,75 75
57,45 61,9
44,95 49,4

please indicate:
9
9
32,45 36,9

9,2
9,21
PCI 041 ...

Ø 3,2
KHPC 138 O
Ø 3,2
Brackets for PC

D-Sub 9-pol. D-Sub 9-pol. D-SUB 9-pol.

99 108,89 99,05
86,5 96,39 86,55

... fixing strap

74 83,89 74,05
65,71 66,05
54
53,21 53,55
41,5
41,05
29 40,71

L = with fixing straps

9,21

O = without fixing strap

Ø3,2

8, 7

9,21
PCI 012 ...

Ø 3,5
KHPC 006 O
KHPC 144 O

Ø 3,2
D-Sub 9-pol. D-Sub 9-pol. D-Sub 9-pol. D-Sub 9-pol. D-Sub9-pol. D-Sub9-pol.

102,15
104,5
92 89,65
79,5 77,15
58,8 60,15
46,3 47,65
33,8 35,15
9

9,21
KHPC 012 O
KHPC 142 O

Ø3
Ø 3,2
D-Sub 9-pol. D-Sub 9-pol. D-Sub 9-pol. D-Sub 9-pol.

93,8 101,25
81,3 88,75
68,8 76,25
58,8 60,25

46,3 47,75
33,8 35,25
9

9,21

Ø 3,2
KHPC 141 O
KHPC 053 O

Ø 3,2

K 10
D-Sub 9-pol. D-Sub 9-pol. D-Sub 9-pol. D-Sub 9-pol.

L
F
E
C
B
A

K
D

H
G

N
M
 I

L
F
E
C
B
A

K
D

H
G

N
M
99,5
87
74,5

K 11
61,1
48,6

9
9
9
9
9
36,1
9,21
KHPC 072

Ø 3,2
Brackets for PC

D-Sub 9-pol. D-Sub 9-pol.

110,75
110,6 108,5
98,25
98,1 96
85,6 85,75
83,5
79,3 61,55 20
66,8 74
54,3 57,45
61,5
48

4,7
44,95 49
35,5

9
23 32,45
9,21

9,2

9,22
Ø 3,2

KHPC 065 O
KHPC 160 O
KHPC 009 O

Ø 3,2

Ø 3,1
D-Sub 9-pol. D-Sub 9-pol. D-Sub 9-pol. D-Sub 9-pol. D-Sub 9-pol.
D-Sub 9-pol. D-Sub 9-pol.

114,5
101,25
102
88,75
89,5
76,25
78,5
66 60,25
53,5 47,75
44,75
35,25
32,25
19,75 R 2,1
9,6

9, 6
KHPC 454 O
KHPC 143 O

Ø 3,2

Ø 3,2
D-Sub 9-pol. D-Sub 9-pol. D-Sub 9-pol. D-Sub 9-pol. D-Sub 9-pol.

111,75
99,75

at the end of section "K".

99,25
86,75 87,25
79,25 74,75
66,75 66,75
54,25
54,25
46,75

If you do not find a suitable bracket,

34,25 41,75
21,75

please use the PCI / KHPC design sheet

10

10
KHPC 015 L

Ø 3,2

KHPC 005 O

Ø 3,2
D-Sub 9-pol. D-Sub 9-pol.
D-Sub 9-pol. D-Sub 9-pol. D-Sub 9-pol.
 105,25
92,75
80,25
72,25
55,6

please indicate:
9
9

15
15
38,95

9,21
KHPC 076 O

Ø 3,1
Brackets for PC

D-Sub 15-pol. D-Sub 9-pol.

107,1 97,29
94,6 80,64

... fixing strap

82,1 63,99
54,00
60,15
41,50
43,5
29,00
Ø 3,5

26,85

L = with fixing straps

9,21

O = without fixing strap

9,2
PCI 065 O

KHPC 179 O

Ø 3,2
D-Sub 15-pol. D-Sub 9-pol. D-Sub 9-pol. D-Sub 15-pol.

108,4 105,25
91,75 92,75
75,1 80,25
62,05 72,25
55,6
49,55
37,05 38,95
9,21

9, 2
PCI 031 O

3, 2

KHPC 177 O

Ø3
D-Sub 9-pol. D-Sub 15-pol. D-Sub 15-pol. D-Sub 9-pol.

107,7
107,05
91,05 94,55
74,4
82,05
62,4 60,3
49,9 43,65
37,4 27
9, 6

9,21
3,1
PCI 032 O

3,4
KHPC 178 O

K 12
D-Sub 9-pol. D-Sub 15-pol. D-Sub 15-pol. D-Sub 9-pol.
R 2,1

L
F
E
C
B
A

K
D

H
G

N
M
 I

L
F
E
C
B
A

K
D

H
G

N
M
105,25
81,75
58,25

K 13
50,25
37,75

9
9

25
25
25,25

9,21
KHPC 185 O

Ø 3,2
Brackets for PC

D-Sub 9-pol. D-Sub 25-pol.

109,4 103,25 105,7 15,1

85,9 90,75
82,2
62,4 78,25 58, 7
53 70,25 51,4
40,5 46,75 38,9
28 23,25 26, 4

8
10,2

9,21
3, 2
PCI 033 ...

KHPC 189 L

KHPC 061 O
Ø 3,2

Ø3
D-Sub 9-pol. D-Sub 25-pol. D-Sub 25-pol. D-Sub 9-pol. D-Sub 9-pol. D-Sub 25-pol.

111,1 112,85
98,6 100,35
86,1
87,85
77,95
72,75
54,45
49,25
30,95 25,75
9

9,21
KHPC 038 O
KHPC 041 O

Ø 3,2
D-Sub 25-pol. D-Sub 9-pol.
D-Sub 25-pol. D-Sub 9-pol.

Ø 3,2
106,45

at the end of section "K".

111
93,95
87,5
81,45
64
56,75 72,75
44,25 49,25
31,75

If you do not find a suitable bracket,

25,75

please use the PCI / KHPC design sheet

9

9,21

Ø 3,2
KHPC 187 O
KHPC 040 O

Ø 3,2

D-Sub 9-pol. D-Sub 25-pol.

D-Sub 25-pol. D-Sub 9-pol.
 A
Brackets for PC
KHPC 188 O KHPC 078 O
9,21 9,42
B

R 2,1
D-Sub 25-pol.

D-Sub 25-pol.
C
114,26

D-Sub 9-pol.

105
90,76

D
81,5

D-Sub 9-pol.
67,26
60,72

58
48,22

49,5

Ø 3,2
35,72

37

24,5

Ø 3,2

E
PCI 014 L PCI 045 ... PCI 015 ...
9,21 9,21 9,21

D-Sub15-pol.
Ø3

15 G
D-Sub 15-pol.
D-Sub15-pol.

97,29 3,2
80,64
76,3
59,65

63,99
64,6

H
47,95

43

Ø 3,1
31,3

KHPC 019 O KHPC 073 ... KHPC 024 O

9,21
9,21
9,21
I
D-Sub 15-pol.

K
D-Sub 15-pol.

15
Ø 3,2
103,4

L
Ø 3,2
D-Sub 15-pol.

97,99

86,75
81,34

70,1
64,69
65,3
48,65

Ø 3,1
32

please indicate: ... fixing strap

O = without fixing strap
L = with fixing straps
K 14 N
 I

L
F
E
C
B
A

K
D

H
G

N
M

K 15
15
15
15
15
15
Brackets for PC

106,4 104,9 115

89,75 88,25 63 46
73,1 71,6 58,15
3

65,4
7

62,4 41,5
13,2

48,75 45,75 24,85

32,1 29,1
9, 2

9
Ø3
9,21
PCI 047 O

KHPC 230 O
KHPC 200 O

Ø 3,2
D-Sub 15-pol. D-Sub 15-pol. D-Sub 15-pol.
D-Sub 15-pol.
Ø 3,2

103,4
109,03
111,85
86,75
92,38
95,20
70,1
75,73
58,4 78,55
64,22
60,20
41,75 47,57
Ø 9,1

39,45
Ø 9,1

25,1 30,92
9,21

9,21

Ø3
PCI 071 O

9,21
KHPC 022 L
KHPC 455 L

Ø 3,2
2x Ø 3,2

D-Sub 15-pol. D-Sub 15-pol. D-Sub 15-pol.

D-Sub 15-pol. D-Sub 15-pol.

at the end of section "K".

106,74 104,4
90,09
87,75
73,44
71,1
61,3
38,75 23
44,65

If you do not find a suitable bracket,

28
10

please use the PCI / KHPC design sheet

12
2

9,21
KHPC 225 O
KHPC 218 O

Ø 3,1
Ø 3,2

D-Sub 15-pol. D-Sub 15-pol. D-Sub 15-pol.

 112,15
109,55
95, 5
92,9
78,85
76,25
72,2
65,05
48, 7
48,4

please indicate:
25,2

25
15
31,75

9,21
9,21

KHPC 075 O
KHPC 069 O

Ø 3,2

Ø3
Brackets for PC

D-Sub 25-pol. D-Sub 15-pol. D-Sub 15-pol. D-Sub 15-pol.

113,32
96,67 108,5
91,85

... fixing strap

80,02
75,2
71,42
65,2
47,92
48,55
24,42 Ø3 31,9

L = with fixing straps

9
9,21

O = without fixing strap

KHPC 042 O
KHPC 229 O

Ø 3,2

D-Sub 15-pol. D-Sub 15-pol.

D-Sub 25-pol. D-Sub 15-pol.

110,74
114,1
90,6 94,09
67,1 77,44
59,05 65,3
42,4 48,65
25,75 32
9
9,21

KHPC 241 O
KHPC 018 O

Ø 3,1

Ø 3,2
D-Sub 15-pol. D-Sub 25-pol.
D-Sub 15-pol. D-Sub 15-pol.

110,15
93,5
76,85
70,75
47,25
23,75
9,21
KHPC 242 O

Ø3

K 16
D-Sub 25-pol. D-Sub 15-pol.

L
F
E
C
B
A

K
D

H
G

N
M
A
Brackets for PC
PCI 017 ... PCI 018 ... PCI 016 L

B 8,62 9,21 9,42

D-Sub25-pol.
D-Sub25-pol.

D-SUB25-pol.
25
93,55

95,5
D

83,05
70,05

72
Ø3,2 Ø3,2

59,55
48,5
46,55

Ø3,1

36,05
E
KHPC 243 O KHPC 070 O KHPC 027 O
9 9 9

D-Sub 25-pol.
G 25
D-Sub 25-pol.

106,25
D-Sub 25-pol.

Ø 3,2
83,75

82,75
71,42

60,25

H 59,25
47,92

Ø 3,1
36,75
24,42

Ø3

KHPC 054 O KHPC 028 O KHPC 026 ... KHPC 052 L

I 9,1 9,21 9,21 9,8
D-Sub 25-pol.

K
D-Sub 25-pol.

D-Sub 25-pol.
D-Sub 25-pol.
107,5

L
94,25
94,62

Ø 3,2
77,25
84

71,12

70,75

Ø 3,2 Ø 3,2
60,5

53,75

47,62

47,25
30,25

Ø 3,2

If you do not find a suitable bracket,

N K 17 please use the PCI / KHPC design sheet

at the end of section "K".
 A
Brackets for PC
PCI 072 O
9,22
B

15,4
13

25
C

D-Sub 25-pol.
102,85

D
87,45
77,90
54,40

Ø 3,2
30,90

E
KHPC 262 O KHPC 043 O
9,2 9,21

F
Ø9
Ø 12

Ø 12
25 D-Sub 25-pol.

G
D-Sub 25-pol.
105,4

90,5
90,4

78,2
78,9

54,7

H
55,4

Ø3
31,2

Ø 3,2
31,9

Ø 4,8
13,2

PCI 076 O PCI 035 L PCI 077 ...

8,73
I
9
9,21

K
Ø3
D-Sub 37-pol.
D-Sub 37-pol.

37
101,75

L
D-SUB 37-pol.

96,35
94,7

3,2
70

64,6
62,95

Ø 3,2
32,85
38,25
31,2

please indicate: ... fixing strap

O = without fixing strap
L = with fixing straps
K 18 N
A
Brackets for PC
PCI 020 ...

B 9,21

C D-Sub37-pol.
98,55

D
66,8

Ø3,2
35,05

E
KHPC 058 O KHPC 035 O KHPC 277 O
9 9 9, 2

D-Sub 37-pol.
37
G

D-Sub 37-pol.
D-Sub 37-pol.

107

98,5
92,75

75,25

66,75
61

Ø 3,2
H
43,5

Ø 3,2
29,25

35

Ø 3,2

KHPC 267 O KHPC 033 O KHPC 270 O KHPC 271 O

I 9,21 9,21 9,21 9,21

K
D-Sub 37-pol.

D-Sub 37-pol.
D-Sub 37-pol.
D-Sub 37-pol.

L
94,5

94,81
92,35
87,7

62,75

63,06
60,6
55,95

Ø3
Ø 3,2
31,31
28,85

Ø3
31
24,2

M
Ø 3,2

If you do not find a suitable bracket,

N K 19 please use the PCI / KHPC design sheet

at the end of section "K".
 A
Brackets for PC
KHPC 034 O KHPC 031 O KHPC 032 O
9,21 9,21 9,21
B

D-Sub 37-pol.

D-Sub 37-pol.
D-Sub 37-pol.

108,5
102,87
102,5

76,25
70,75

71,12

Ø 3,2
Ø 3,2 Ø 3,2

45
39,37
39

E
KHPC 029 O KHPC 295 O
9,2 9, 2
5
Ø9

Ø 3,2 F
Ø6
5,5

37
D-Sub 37-pol.

G
D-Sub 37-pol.
104,78

113
104,8
94,13

94,17
62,38

62,42

H
30,63

Ø 3,1 Ø 3,2
30,67

KHPC 036 ... KHPC 051 O KHPC 308 L

8,7 9,21 9,21
I

K
D-Sub 50-pol.
D-Sub 50-pol.

D -Sub 50 -pol.

50
105,68
103,05

L
98,5

75,13
72,5

67,95

Ø 3,2
Ø 3,2
44,58
41,95

Ø 3,1
37,4

please indicate: ... fixing strap

O = without fixing strap
L = with fixing straps
K 20 N
A
Brackets for PC
PCI 021 O

B 8,92

13
D 53,55

12

E
KHPC 325 O
8,7

G Ø 13
97,8
79,35

PCI 083 L
I 7,85

Ø4
13

K 12
109,38

L
9
96,89

28
72,3
33,54

M
5,9

If you do not find a suitable bracket,

N K 21 please use the PCI / KHPC design sheet

at the end of section "K".
 A
Brackets for PC
KHPC 335 L
9 B

D
88,9
71,12

Ø 13
50,8

E
PCI 104 O
10,65
6,55

F
8,2

G
74,5
106,7

Ø 2,7
H
30,3
28,4

KHPC 365 L KHPC 085 L KHPC 391 O

9,21
I
Ø 3,2

2,5 3

K
26

4,56
82

74,7

L
111
70,25

13 9,3
28,75

33
29,7

please indicate: ... fixing strap

O = without fixing strap
L = with fixing straps
K 22 N
A
Brackets for PC
KHPC 398 O

B
3, 5

C
90

D
11,5
21,75

E
KHPC 404 L KHPC 407 L

F 13,1
32,1

2, 4

G
2,3
15,8
15,2

15,8
70,45

13,5
54,97

13,2

H
44,15

37,19

PCI 051 ...

I 4

11,6
13,0

L
89,4

70,4

51,4

32,4

If you do not find a suitable bracket,

N K 23 please use the PCI / KHPC design sheet

at the end of section "K".
 A
Brackets for PC
KHPC 439 O
4,14
B

14,64
C
14,28

D
81,66

E
KHPC 449 O KHPC 469 O Detail - B
9,2
11,02
15,63 6,4
14,32
7,72 2,8
6,41
F

G
50,6
46,4
42,8
36,4
103,1

104,35
106,6
77,8

102,6
99,6
52,5

75,6

7,27
11,2
14,76 0,85 H
51,6

46,85
48,6

44,6

7,5

please indicate: ... fixing strap

O = without fixing strap
L = with fixing straps
K 24 N
A
User information für PCI and KHPC-Design
PCI- and KHPC-DESIGN

B The cutouts shown on the Design sheet should be positioned on the pictured grid.
The zero point of the respective cutout is to be placed on the grid point of the PC card bracket, whereby the X/Y coordinates should be
entered in the table as absolute dimensions. Positioning of the cutouts can be specified with an accuracy of max. 0,01 mm. The grid
specifies the max. area of the cutout including the component. Please mark whether the version is with or without bent fixing tabs.
Other contours, dimensions and cutouts are possible, to the extent that they are t­echnically possible to produce.
Please contact us with regard to this.
C

Example

D
X
PCI

E
Y

Y
Y
Y
X
F X
X

Shape X-dimension Y-dimension

G A A = 20 B = 10 14 12
E D=5 49 9
D1 D = 12 D1 = 11 65 10

H
X
KHPC
Y

I
Y
Y

X
K X
X

L Shape X-dimension Y-dimension

A A = 33 B = 10 12 3
E D= 5 54 9
D1 D = 9,5 D1 = 8,7 68 9

N K 25
 21,6 61,1 63,5 47 33,3
19,1

3,7
5,88
2,54

11,75
ØD

12,25
D-Sub 50 pol. D-Sub 37 pol. R D-Sub 25 pol. D-Sub 15 pol.

11,05
shape: F 5 shape: F 1 shape: F 2 shape: F 3

3,95
2,54

4,4
18,42
25,0
D1 D1
24 A

0,5
D
D

D
D
11,75

104,4
D-Sub 9 pol.

10,9
shape: F 4 shape: E shape: D 2 shape: D 3 shape: D 1

7,85
E
G

2,87 zero point J I K

B
F

+
B

11,05
M L N
D
H

10,2

85,4

77,55
radius F 1 ... 4

19
A A A

120,8
0,8 build in mode: shape: A shape: B shape: C
4,1 3,4 mm rear with radius, mm:
2,1 mm front
14,3

7,25
21,6
x

M3
-10 0 10 20 30 40 50 60 70 80 90

7,85
with fixing strap

24,5
without fixing strap 10
y 1:1

5°
0
8,6

shape X-dim. Y-dim. A B C D D 1 E F G H I J K L M N

PCI
DESIGN
company name: part name: drawing number:
 21,6 61,1 63,5 47 33,3
19,1

3,7
5,88
2,54

11,75
ØD

12,25
D-Sub 50 pol. D-Sub 37 pol. R D-Sub 25 pol. D-Sub 15 pol.

11,05
shape: F 5 shape: F 1 shape: F 2 shape: F 3

3,95
2,54

4,4
18,42
25,0
D1 D1
24 A

0,5
D
D

D
D
11,75

104,4
D-Sub 9 pol.

10,9
shape: F 4 shape: E shape: D 2 shape: D 3 shape: D 1

7,85
E
G

2,87 zero point J I K

B
F

+
B

11,05
M L N
D
H

10,2

85,4

77,55
radius F 1 ... 4

19
A A A

120,8
0,8 build in mode: shape: A shape: B shape: C
4,1 3,4 mm rear with radius, mm:
2,1 mm front
14,3

7,25
21,6
x

M3
-10 0 10 20 30 40 50 60 70 80 90

7,85
with fixing strap

24,5
without fixing strap 10
y 1:1

5°
0
8,6

shape X-dim. Y-dim. A B C D D 1 E F G H I J K L M N

PCI
DESIGN
company name: part name: drawing number:
 61,1 63,5 47 33,3
21,3
18,42

7,2
4,5

16,8
6,35

28,5
ØD

4,32
12,5
D-Sub 50 pol. D-Sub 37 pol. R D-Sub 25 pol. D-Sub 15 pol.
shape: F 5 shape: F 1 shape: F 2 shape: F 3
2,83
25,0
16 12,5 D1 D1
A
D
D

7,2
D
D

11,01

102,55
7,62
D-Sub 9 pol.
3 shape: F 4 shape: E shape: D 2 shape: D 3 shape: D 1
E
G

zero point J I K
0,8
B
F

10,16 +

78,74

71,12
B

7,62
B

121,5
M L N
D
H

11,75
radius F 1 ... 4 A A A
build in mode: shape: A shape: B shape: C
4,13 2,88
3,4 mm rear with radius, mm:
7,01 2,1 mm front

7,62
17,17
X
21,3
-10 0 10 20 30 40 50 60 70 80

31,75

27,94
3
with fixing strap 0
without fixing strap 9,57
Y
10 1:1
18,42

shape X-dim. Y-dim. A B C D D 1 E F G H I J K L M N

KHPC
DESIGN
company name: part name: drawing number:
 61,1 63,5 47 33,3
21,3
18,42

7,2
4,5

16,8
6,35

28,5
ØD

4,32
12,5
D-Sub 50 pol. D-Sub 37 pol. R D-Sub 25 pol. D-Sub 15 pol.
shape: F 5 shape: F 1 shape: F 2 shape: F 3
2,83
25,0
16 12,5 D1 D1
A
D
D

7,2
D
D

11,01

102,55
7,62
D-Sub 9 pol.
3 shape: F 4 shape: E shape: D 2 shape: D 3 shape: D 1
E
G

zero point J I K
0,8
B
F

10,16 +

78,74

71,12
B

7,62
B

121,5
M L N
D
H

11,75
radius F 1 ... 4 A A A
build in mode: shape: A shape: B shape: C
4,13 2,88
3,4 mm rear with radius, mm:
7,01 2,1 mm front

7,62
17,17
X
21,3
-10 0 10 20 30 40 50 60 70 80

31,75

27,94
3
with fixing strap 0
without fixing strap 9,57
Y
10 1:1
18,42

shape X-dim. Y-dim. A B C D D 1 E F G H I J K L M N

KHPC
DESIGN
company name: part name: drawing number:
 Mounting material
LED fastener for horizontal PCB mounting
Fibre-optics for SMD-LED components
LED fastener for front panel mounting

Mounting material LED fastener for horizontal PCB mounting

• spacers for standard LEDs • single and double fasteners for a standard diameter
• class of flammibility acc. to UL 94 V-0 of 3 and 5 mm
• equipped multi-fastener
• single fasteners and fasteners connectable in series

Fibre-optics for SMD-LED components LED fastener for front panel mounting
• horizontal, fixed fibre-optics with round or rectangular • clipable fastener for 5 mm LEDs
lense made of transparent plastics - also for gauge • fastener for 3 and 5 mm LED with clamping ring
displays
• vertical, fixed fibre-optics with round or rectangular lense
made of transparent plastics
 A
Spacers for LED
– universal mount for LED Ø 3 mm and 5 mm, self retaining

2,5 A B
B

Ø 3,4
2,5
5,1 0,5
C
art. no. B [mm] dim. [mm] art. no. B [mm] dim. [mm]
A A
MAH 31 3.1 MAH 71 7.1
MAH 41 4.1 MAH 81 4.7 8.1 D
1.5
MAH 51 5.1 MAH 89 8.9
MAH 61 6.1 MAH 99 7.9 9.9
insulating body material: MPPS, black
temperature range: -40°C...+240°C/ (260°C/5 s)
E
class of inflammability: UL 94 V-0

2,5 A

F
Ø 4,7
0,76
3,4

0,69
1,3

art. no. dim. [mm] art. no. dim. [mm] G

A A
MAH 401 1 MAH 406 6
MAH 402 2 MAH 407 7
MAH 403 3 MAH 408 8
MAH 404 4 MAH 409 9 H
MAH 405 5 MAH 410 10
insulating body material: PVC Blend, black
temperature range: -40°C... +85°C
class of inflammability: UL 94 V-0
I

L2 N
A
Spacers for LED
– for LED Ø 3 mm, thin mount

B 2,5 A

Ø 3,8
0,76
C 1,3

art. no. dim. [mm] art. no. dim. [mm] art. no. dim. [mm]
A A A
MAH 301 1 MAH 305 5 MAH 308 8
D MAH 302 2 MAH 306 6 MAH 309 9
MAH 303 3 MAH 307 7 MAH 310 10
MAH 304 4
insulating body material: PVC Blend, black

E temperature range: -40°C... +85°C

class of inflammability: UL 94 V-0

– for LED Ø 5 mm, self-retaining

2,8 A

F 0,76
1,3

Ø 5,1
0,76

G
2,1

art. no. dim. [mm] art. no. dim. [mm] art. no. dim. [mm]
A A A
MAH 501 1 MAH 505 5 MAH 508 8
MAH 502 2 MAH 506 6 MAH 509 9
H MAH 503 3 MAH 507 7 MAH 510 10
MAH 504 4
insulating body material: PVC Blend, black
temperature range: -40°C... +85°C

I class of inflammability: UL 94 V-0

N L3
 A
Spacers for LED
– for rectangular LED

5,1 A B

0,5

2,3
C
2,54

art. no. dim. [mm] art. no. dim. [mm] art. no. dim. [mm]
A A A
RAH 503 3 RAH 506 6 RAH 509 9 D
RAH 504 4 RAH 507 7 RAH 510 10
RAH 505 5 RAH 508 8
insulating body material: PVC Blend, black
temperature range: -40°C... +85°C
class of inflammability: UL 94 V-0 E

L4 N
A
LED-holders
– suitable for 3 mm diodes with a collar height of 0.6 mm
– K = cathode
B 3,5
K
2

Ø 4,2
Ø6
5
4
3
C 0,5

2,54
2,5
2

art. no. type

DH 3 V for LED Ø3mm
D insulating body material: PA, GF

– suitable for 5 mm diodes with a collar height of 0.6 mm/1 mm

– K = cathode

6,6 K
E 3
6,35
7,7

5,2

9,2

2,54
0,7

F 1,8

art. no. type

DH 5 VC for LED Ø5mm
insulating body material: PA, GF

G – suitable for 5 mm diodes with a collar height of 0.6 mm/1 mm

– K = cathode
3,4 1 - 1,5
Ø 6,2 7
0,7
1,5 5,6

H
Ø 6,4
Ø 7,5

Ø5

I art. no. type

DH 5 SRC for LED Ø5mm
insulating body material: PA, GF

N L5
 A
LED-holders
LED-holder for LED Ø 3 mm and 5 mm
– K = cathode / * = presentation with diode
B
8
10
1
2,5
*

0,75
1

Ø4
8
5 C
Ø 1,5
4 1,6
K
3,8 2,54

art. no. type

DH 3 W for LED Ø3mm
D
8
10
1
2,5
*

0,75
1
Ø6
8

5 E
Ø 1,5
4 1,6
K
3,8 2,54

art. no. type

DH 5 W for LED Ø5mm
7,6
1
F
7,6 6,1
*
0,75
Ø4
7,6

Ø 1,2
2,6
G
5,08 1,5
K
3,8 2,54

art. no. type

DH 3 R for LED Ø3mm
7,6
7,6
1
H
6,1
*
0,75
Ø6
7,6

Ø 1,2
1,5
2,6
I
5,08
K
3,8 2,54

art. no. type

DH 5 R for LED Ø5mm
insulating body material: PA 4.6. GF K
temperature range: -40°C... +163°C/ (260°C/10 s)
class of inflammability: UL 94 V-0

L6 N
A
LED-holders
LED-holder for LED Ø 3 mm
– stackable LED-holders: single holder/can be strung, left/can be strung, middle/can be strung, right
B
4,6
3,7
8,2 7,25

4,70

9,7
C

7,62

2,54

2,54
art. no. type
DDH 3 E for LED Ø3mm

D 5,8
4,6
3,7 7,25
8,2
4,70

2,54
9,7
7,62

2,54
E
art. no. type
DDH 3 L for LED Ø3mm, can be strung left
5,8

F
4,6
3,7 7,25
8,2
4,70

2,54
9,7
7,62
2,54

G art. no. type

DDH 3 M for LED Ø3mm, can be strung middle
4,6
3,7 7,25

H 8,2
4,70
2,54
9,7
7,62

2,54

I art. no. type

DDH 3 R for LED Ø3mm, can be strung right
insulating body material: PA 6/6, GF
temperature range: -20°C... +85°C
class of inflammability: UL 94 V-0
K

N L7
 A
LED-holders
Fourfold-LED-holders
– standard case, standard colours, diffuse lens, space-saving design, round lens, rectangular lens
– typical data at Tamb=25°C und IF=IFtype, 100% DC B
15 5,08
13,6
Ø 1,9 A-B-C-D
D 1 3 5 7
1-3-5-7 2-4-6-8

11,3
C
9,47
6,93
B

C
A
2 4 6 8
0,5
4,39
2,54
1,85
5,08 3 x 2,54
art. no. type emission colour Spannungen Uftyp / wavelength λmax [nm]
Urmax [V]
DLH 21 AYEH with LED Ø2mm, four- yellow 2.1 / 2.6 585 D
DLH 21 AGEH fold green 2.2 / 2.6 565
for cases: in terms of colour diffuse
insulating body material: Nylon, black
temperature range: -20°C... +85°C
E
class of inflammability: UL 94 V-0
beam angle 2 φ: 80 °
design: 2mm round
derating: from Tamb <20°C, operating current reduced by 0.4 mA/K .
light intensity l: 12 mcd F
flows lFtyp / IFmax: 20/30 mA

L8 N
A
Light pipes for SMDs
– suitable for current SMD types
– 3 mm light pipes
B – horizontal
– ESD-protection from panel to PCB

Ø1

4,12
C
5,55

Ø3
20,6 Ø 0,95

6,2
8,5
3
2,5 1,5

2,5
12,1
2,54 4,17
19,5
art. no. diameter of lense way of fixation
D LL 30 HRS Ø3mm by alignment pins

Ø1,2
Ø 2,7
2,5
Ø 1,25

Ø 2,54
E

4,12
Ø3

5,55
20,6

6,2
8,5
3
1,5
12,1 4,17
2,5

18,7 2,54 9,07

art. no. diameter of lense way of fixation
F LL 30 HRP Ø3mm by press-in pins
Ø1

4,12
5,5
G 20,6
3

Ø 0,95
6,2
8,5
3

2,5 1,5
2,5

12,1
2,54 4,17
18,7
art. no. diameter of lense way of fixation
H LL 35 HVS □ 5.5x3mm by alignment pins
4,5 5,1
Ø3 B 4,5
2,5
1,5
A + 1,5

4,6
A

Ø 1,2
I
1
0,7
Ø1,3 3,5
4,3
1,6

~1,6

Ø1
5,3
2,54
6,4
art. no. diameter of lense way of fixation dim. [mm]
A B
K LL 30 WRFP 038 3.8
LL 30 WRFP 050 5.0
Ø3mm by press-in pins 2.5
LL 30 WRFP 076 7.6
LL 30 WRFP 102 10.2
insulating body material: Polycarbonate, clear
L temperature range: -30°C... +100°C
class of inflammability: UL 94 V-0

N L9
 A
Light pipes for SMDs
– panel light pipe, 6 mm lens, suitable for common SMD LEDs, white lens, large angle of radiation

7
25,8
5,85 B
8,75

~2,5
R 4,3

2,2
Ø 5,85

5,4
Ø 2,85

Ø3
7,65 11,8 C
art. no. diameter of lense way of fixation dim. [mm]
A
LL 60 WRB 254 Ø6mm by press-in pins 25.4
insulating body material: Polycarbonate, clear
temperature range: -30°C... +100°C D
class of inflammability: UL 94 V-0

– panel light pipe 3 mm, ESD protection from panel to PCB

E
Ø 2,8

A Ø 3,8 Ø3
Ø3

1,3
~2,4
5,4
F
art. no. diameter of lense dim. [mm] art. no. diameter of lense dim. [mm]
A A
LL 30 PRB 025 2.5 LL 30 PRB 080 8.0
LL 30 PRB 032 3.2 LL 30 PRB 089 8.9
LL 30 PRB 040 4.0 LL 30 PRB 095 9.5 G
LL 30 PRB 051 Ø3mm 5.1 LL 30 PRB 117 Ø3mm 11.7
LL 30 PRB 060 6.0 LL 30 PRB 127 12.7
LL 30 PRB 064 6.4 LL 30 PRB 159 15.9
LL 30 PRB 070 7.0 LL 30 PRB 190 19.0
H
2,3 A
Ø 2,84
3,2

(1,06)
Ø3 Ø 3,1
I
1,27 Ø 3,8

art. no. diameter of lense dim. [mm] art. no. diameter of lense dim. [mm]
A A
LL 30 PRF 025 2.5 LL 30 PRF 070 7.0 K
LL 30 PRF 032 3.2 LL 30 PRF 080 8.0
LL 30 PRF 040 4.0 LL 30 PRF 089 8.9
Ø3mm
LL 30 PRF 048 Ø3mm 4.8 LL 30 PRF 100 10.0
LL 30 PRF 050 5.0 LL 30 PRF 159 15.9
LL 30 PRF 060 6.0 LL 30 PRF 211 21.1
L
LL 30 PRF 064 6.4
insulating body material: Polycarbonate, clear
temperature range: -30°C... +100°C
class of inflammability: UL 94 V-0 M

L 10 N
A
Light pipes for SMDs
– panel light pipe 5 mm, ESD protection from panel to PCB

B 8,1 A

5,18

Ø4
Ø5

Ø3
C 2,4
1 0,5 Ø5 Ø 5,05
Ø 5,8

art. no. diameter of lense dim. [mm] art. no. diameter of lense dim. [mm]
A A
LL 50 PRB 032 3.2 LL 50 PRB 190 19.0
D LL 50 PRB 095 Ø5mm 9.5 LL 50 PRB 254 Ø5mm 25.4
LL 50 PRB 127 12.7 LL 50 PRB 318 31.8
insulating body material: Polycarbonate, clear
temperature range: -30°C... +100°C

E class of inflammability: UL 94 V-0

Lichtleitermaterial: polycarbonate, clear

panel light pipe 3 mm, ESD protection from panel to PCB, lentil type "clear" if not specified

F
A
Ø 2,8

0,8
Ø 3,2 Ø 2,92
0,9

G
art. no. diameter of lense dim. [mm] art. no. diameter of lense dim. [mm]
A A
LL 30 PRL 025 ... 2.5 LL 30 PRL 064 6.4
LL 30 PRL 030 LL 30 PRL 070 7.0
H LL 30 PRL 030 D
3.0
LL 30 PRL 080 8.0
LL 30 PRL 032 ... 3.2 LL 30 PRL 089 8.9
Ø3mm
LL 30 PRL 040 Ø3mm 4.0 LL 30 PRL 100 10.0
LL 30 PRL 048 4.8 LL 30 PRL 127 12.7
LL 30 PRL 050 LL 30 PRL 159
I LL 30 PRL 055
5.0
LL 30 PRL 190
15.9
5.5 19.0
LL 30 PRL 060 6.0
please indicate: ... Lentil type (optional)
D = diffuse
K S = shaded
insulating body material: Polycarbonate, clear
temperature range: -30°C... +100°C
class of inflammability: UL 94 V-0

N L 11
 A
Light pipes for SMDs
– panel light pipe 5 mm, ESD protection from panel to PCB

A B

4,11
Ø4
Ø5

3
1,3
(1,8)
0,5 Ø5 Ø 4,05 C
art. no. diameter of lense dim. [mm] art. no. diameter of lense dim. [mm]
A A
LL 50 PRL 089 8.9 LL 50 PRL 190 19.0
LL 50 PRL 095 Ø5mm 9.5 LL 50 PRL 254 Ø5mm 25.4 D
LL 50 PRL 159 15.9 LL 50 PRL 318 31.8
insulating body material: Polycarbonate, clear
temperature range: -30°C... +100°C
class of inflammability: UL 94 V-0
E
panel light pipe 5 mm, ESD protection from panel to PCB

(1,6) Ø 3,3 Ø 2,92

F
2,9
3,1

art. no. diameter of lense dim. [mm] art. no. diameter of lense dim. [mm]
G
A A
LL 30 PRE 032 3.2 LL 30 PRE 095 9.5
Ø3mm Ø3mm
LL 30 PRE 064 6.4 LL 30 PRE 127 12.7
insulating body material: Polycarbonate, clear H
temperature range: -30°C... +100°C
class of inflammability: UL 94 V-0

– panel light pipe 5 mm, ESD protection from panel to PCB

1,3 (1,8) 0,76 Ø5 Ø 3,95

I
1,78

3,85

K
A

art. no. diameter of lense dim. [mm] art. no. diameter of lense dim. [mm]
A A
LL 50 PRK 032
Ø5mm
3.2 LL 50 PRK 095
Ø5mm
9.5 L
LL 50 PRK 064 6.4 LL 50 PRK 127 12.7
insulating body material: Polycarbonate, clear
temperature range: -30°C... +100°C
class of inflammability: UL 94 V-0
M

L 12 N
A
Light pipes for SMDs
– panel light pipe Rechteck 3,3 mm, ESD protection from panel to PCB

B (1,5) 3,3 3

3,15

3,3
2,9

3
C
0,8 A

art. no. diameter of lense dim. [mm] art. no. diameter of lense dim. [mm]
A A
D LL 30 QRL 032
□ 3,3mm
3.2 LL 30 QRL 095
□ 3,3mm
9.5
LL 30 QRL 064 6.4 LL 30 QRL 127 12.7
insulating body material: Polycarbonate, clear
temperature range: -30°C... +100°C
class of inflammability: UL 94 V-0
E – suitable for current SMD LEDs, vertical, rigid light pipe Ø 3 mm, ESD protection from panel to PCB

~4,5
3,2 4,1
1

4,1
Ø3

4,7
Ø 0,6

Ø 0,6
Ø 0,5
A 4,7
A+2,7

art. no. diameter of lense way of fixation dim. [mm]

A
G LL 30 VRFS 024 2.4
LL 30 VRFS 050 Ø3mm by alignment pins 5.0
LL 30 VRFS 075 7.5
insulating body material: Polycarbonate, clear
H temperature range: -30°C... +100°C
class of inflammability: UL 94 V-0

N L 13
 A
Light pipes for SMDs
– panel light pipe, suitable for common SMD LEDs, white lens, large angle of radiation

B
Ø

Ø 2,57
3,8
C

A
8,6

2,2
7,4
3,1

7,4 2,6 D
10,9 6

art. no. diameter of lense dim. [mm] art. no. diameter of lense dim. [mm]
A A
LL V 20 089 F 8.9 LL V 30 190 R 19.0 E
LL V 20 102 F 10.2 LL V 30 254 F 25.4
Ø3mm
LL V 20 114 F 11.4 LL V 30 318 F 31.8
LL V 20 140 F 14.0 LL V 30 445 F 44.5
Ø2mm
LL V 20 152 F 15.2 LL V 40 114 F 11.4
F
LL V 20 190 ... 19.0 LL V 40 127 R 12.7
LL V 20 254 ... 25.4 LL V 40 140 ... 14.0
Ø4mm
LL V 20 381 F 38.1 LL V 40 152 ... 15.2
LL V 30 114 F 11.4 LL V 40 190 F 19.0
LL V 30 127 F Ø3mm 12.7 LL V 40 445 R 44.5 G
LL V 30 152 F 15.2
please indicate: ... lens design (optional)
R = round
F = shallow
insulating body material: PA 4.6. GF H
temperature range: -30°C... +100°C
class of inflammability: UL 94 V-0
Lichtleitermaterial: polycarbonate, clear

L 14 N
A
Light pipes for SMDs
– panel light pipe, suitable for common SMD LEDs, white lens, large angle of radiation

Ø 2,57
Ø
3,8

C 11,7

B
7,4
3,1

2,6

D 7,4
A

10,9

art. no. diameter of lense dim. [mm] art. no. diameter of lense dim. [mm]
A B A B

E LL W 30 203 178 ...

LL W 30 203 254 ...
17.8 LL W 30 254 254 F
LL W 30 318 178 F
Ø3mm
25.4 25.4
25.4 31.8 17.8
Ø3mm 20.3
LL W 30 203 381 F 38.1 LL W 40 203 508 R Ø4mm 20.3 50.8
LL W 30 203 762 F 76.2
please indicate: ... lens design (optional)
F R = round
F = shallow
insulating body material: PA 4.6. GF
temperature range: -30°C... +100°C
class of inflammability: UL 94 V-0
G Lichtleitermaterial: polycarbonate, clear

N L 15
 A
Light pipes for SMDs
– panel light pipe, suitable for common SMD LEDs, white lens, large angle of radiation
Ø
4,06 B

Ø 1,78
20,3

A
17,78 17,78

3,56

8,9
3,05 C
1,97 5,08
1,88
art. no. diameter of lense dim. [mm]
A
LL 4 V 20 254 ... Ø2mm D
LL 4 V 30 254 ... Ø3mm 25.4
LL 4 V 40 254 ... Ø4mm
insulating body material: PA 4.6. GF
temperature range: -30°C... +100°C
class of inflammability: UL 94 V-0
E
Lichtleitermaterial: polycarbonate, clear
Ø
4,57

12,19
3,56

4,06
2,03

F
10,92

6,6
Ø 1,78
1,88 1,97

6,6
1,52 12,19
17,27

art. no. diameter of lense dim. [mm] G

A
LL 4 W 20 254 ... Ø2mm
LL 4 W 30 254 ... Ø3mm 25.4
LL 4 W 40 254 ... Ø4mm
please indicate: ... lens design (optional)
H
R = round
F = shallow
insulating body material: PA 4.6. GF
temperature range: -30°C... +100°C
class of inflammability: UL 94 V-0
I
Lichtleitermaterial: polycarbonate, clear

L 16 N
High quality surface treatment for electronic components

Gold-plating Tin-plating
properties: high resistance to wear, good properties: solderable layers with improved
corrosion resistance, temperature tarnishing and corrosion resistance
stability and solderability process: drum technology
process: drum technology materials: non-ferrous metals
materials: non-ferrous metals coating system: copper/nickel/tin
coating system: copper/nickel/gold

Anodising Degreasing
performance: fabrication of corrosion resistant, performance: degreasing of oily or greasy
decorative oxide films metallic surfaces
process: anodic oxidation in fully process: steam degreasing using chlorina-
automated equipment ted hydro-carbons in hermetically
materials: aluminium and aluminium alloys sealed equipment
max. component size: 1500 x 2000 x 450 mm material: aluminium and aluminium alloys
colour: natural aluminium or black min. component size: 30 x 30 x 30 mm
max. component size: 600 x 400 x 380 mm
max. component weight: 80 kg
High quality surface treatment for electronic components

Transparent passivating Vibratory grinding (trowalization)

(surface free from chromium) characteristics: deburring, removing of sharp edges,
characteristics: environmental compatibility due to chrome rough and fine grinding
free passivation of the aluminium surfaces process: treatment using vibration technique and
process: fabrication of conversion coatings by grinding tools (trowalization)
immersion process materials: aluminium
materials: aluminium und aluminium alloys max. component size: 230 x 200 mm
max. component size: 1500 x 2000 x 450 mm
colour: natural aluminium

Anodisation facility
• economization of water by using spray-rinsing,
automized ion exchange installation, cascade water
guided system and recirculation of splash water
• reduction of electrical energy by means of current
density regulation
• reduction of chemicals by recirculation of the
dragged-off chemicals using a compensation of the
evaporation losses
• recycling of the sulphuric acid out of the anodizing bathes
Terms and conditions of business
1. General provisions 6. Delivery (reduction), unless we are entitled to refuse to effect a
1.1. The present General Terms and Conditions (GTC) apply The delivery is performed from the storage, where- cure by virtue of legal regulations. The purchaser shall
to all of our business relationships with out customers ver the place of fulfilment for the delivery and any grant us an adequate period of grace for effecting a
(“Purchaser”). The GTC only apply if the Purchaser is subsequent fulfilment may be. Upon request by the cure. A cure may at our discretion be an elimination of
an entrepreneur (§ 14 of the German Civil Code), a Purchaser, the Goods will be sent to a different place of the defect (rectification) or the supply of new products.
legal entity of public law or a special fund under public their choice (shipped purchase). Delivery of our goods We are entitled to determine the cure owed accor-
law. is explicitly made on behalf of and at the risk of the ding to the payment of the purchase price due by the
The GTC particularly apply for contracts about the sale purchaser. The risk shall pass over to the purchaser Purchaser. The Purchaser, however, is entitled to retain
and/or the delivery of transportable objects (“Goods”), when the ordered goods leave our premises. The same a part of the purchase price that is proportionate to the
regardless of whether we manufacture the Goods our- applies if goods are collected in our premises from the defect. The expenses incurred for the verification and
selves or buy them in from suppliers (§§ 433, 651 of point in time at which we notify the purchaser that they cure, particularly transport, road, work and materials
the German Civil Code). Unless otherwise agreed, are ready for collection. Unless we have received ins- costs (not: expansion and installation costs) are borne
the GTC apply, in the version valid at the time of the tructions to the contrary from the purchaser, we shall by us, if there is indeed a defect. Otherwise, we can
Purchaser’s order or in the version last transmitted to decide at our discretion on the most economical delive- require that the Purchaser bear the costs arising from
them, as a framework agreement for similar future con- ry method without assuming any liability for the chosen the unjustified defect rectification request (particularly
tracts, without us having to refer to them each time. means of delivery. examination and transport costs), unless the Purchaser
1.2. Our GTC apply exclusively. Deviating, contradicting 7. Specially manufactured goods could not have been aware that the defect rectification
or additional General Terms and Conditions of the Components made according to a sample or a drawing was unnecessary.
Purchaser are only part of the contract if we have ex- or by special request must be taken over and paid for, 10.3. If rectification of the defect has failed, the purchaser
pressly authorised their validity. This approval require- unless they have a defect we are answerable for and shall be entitled to request a reduction in the purchase
ment applies in any case, also if we make deliveries to which makes the components completely unfit for the price (abatement) or to withdraw from the contract.
the Purchaser without reserve, in full knowledge of their purchaser‘s purposes. If their fitness for the purchaser‘s Rectification shall be deemed to have failed after the
Terms and Conditions. Individual, isolated agreements purposes is only reduced, the purchaser may request second vain attempt, unless further attempts are reaso-
with the Purchaser (including ancillary agreements, a reduction of payment but the contract shall not be nable in view of the object of the contract and can be
additions and changes) always take priority over these cancelled. reasonably imposed on the purchaser.
GTC. The content of this type of agreement, subject to 8. Quantities 10.4. The purchaser‘s right to put forward further claims for
counterevidence, is to be determined according to a We are entitled to supply quantities which are above damages shall remain unaffected by this.
written contract or our written confirmation. or below the ordered quantities by up to 10%. Such 10.5. The purchaser’s warranty claims shall be subject to a
1.3. Legally relevant declarations and announcements of deviations are usual in this trade and the deliveries are time limit of 12 months from the delivery of the goods
the Purchaser with regards to the contract (for example deemed as being in compliance with the contract. If de- to the purchaser, unless we have fraudulently conce-
deadline agreements, defect notifications, withdrawal livery quantities fall below the ordered quantities there aled the defect. In this case, the legal regulations shall
or reduction) are to be submitted in writing, i.e. in writ- shall be no right to subsequent delivery of the missing apply.
ten or text form (for example letter, e-mail, fax). Legal quantity. 10.6. The purchaser’s claims for damages shall be subject
form provisions and other certificates, especially in 9. Reservation of proprietary rights to a time limit of 12 months from the delivery of the
case of doubts about the legitimation of the declaring 9.1. All goods supplied shall remain our property until all goods. This does not apply if we, our legal represen-
party, remain unaffected. current and future claims resulting from the Purchase tatives or other vicarious agents are responsible for
1.4. References to the validity of legal provisions are only contract and the business relationship with the death, personal injury or physical harm, or if we or our
for clarification purposes. The legal provisions there- purchaser (secured claims) have been paid in full. The legal representatives have been grossly negligent, or if
fore apply even if there is no reference, unless they purchaser is entitled to dispose of the purchased goods our vicarious agents have acted with intent.
have been modified directly in these GTC or expressly in the ordinary course of business transactions. Reser- 10.7. Contractual penalties which have been agreed bet-
excluded. vation of proprietary rights also applies to products ween our customers and their customers cannot be
2. Quotations and orders resulting from processing, mixing up or combining imposed upon us unless we have been notified of them
Our quotations shall be subject to change without noti- our goods, in which case we are considered as manu- and have agreed to them in writing prior to accepting
ce and are non-binding. This applies also to informa- facturers. In the case where our goods are processed, an order.
tion contained in price lists, leaflets etc. Delivery dates mixed up or combined with goods of third parties, and 10.8. If it becomes apparent (by the opening of an appli-
stated in our quotations or given to the purchaser by the proprietary rights of such third parties remain in cation for an insolvency procedure for example) after
any other means are approximate, and we shall en- force, we are entitled to co-ownership according to the the conclusion of the contract that our claims to the
deavour to keep to them. Delays in delivery shall give proportion of the amount invoiced for such processed purchase price are endangered due to lacking pay-
no right to claims, unless we have explicitly confirmed goods. In such cases such rights to co-ownership shall ment capacities of the Purchaser, we will then be en-
such delivery dates and an adequate period of grace be safeguarded by the purchaser. titled to refuse the delivery and – after a possible period
granted to us has expired. Orders shall only be binding 9.2. The purchaser shall transfer to us, as a security, his of notice – to withdraw from the contract in accordance
on us when they have been explicitly confirmed in wri- claims against third parties resulting from the re-sale with the legal provisions (§ 321 of the German Civil
ting, regard- less of the form in which they have been of our goods in full or in the proportion of our coow- Code). For contracts about the manufacturing of speci-
placed with us. Statements made in catalogues are sim- nership (see subparagraph 9.1). He is entitled to collect fic items (making to specification), we can declare the
ply descriptions of goods and under no circumstances the amount of such claims on our behalf until revoked withdrawal immediately; the legal regulations about
do they constitute warranted qualities. Furthermore, the or until cessation of his payments made to us. The the dispensability of giving a period of notice remain
characteristics of our samples cannot be regarded as purchaser is not entitled to assign these claims to third unaffected.
warranted characteristics. parties. 11. Withdrawal
3. Prices 9.3. The purchaser is not entitled to mortgage or transfer When delivery in accordance with the contract is
Prices shall be valid only when confirmed by us in the goods which are subject to reservation by way of not possible for reasons beyond our control, we are
writing. They are exclusive of VAT at the current rate security. entitled to withdraw from the contract. Such withdra-
and incidentals such as postage and packing, freight, 9.4. The purchaser shall advise us immediately at any sei- wal shall not en title the purchaser to assert any right
insurance etc., as of storage. If deli- very is made more zure of our goods or of any infringement of our rights against us.
than 3 months after the date of order, we shall be en- by third parties. 12. Export clause
titled to invoice the price valid at the date of despatch, 9.5. In case of a default in payment or a deterioration in We are not obliged to reimburse damages arising from
even though different prices were initially confirmed. the financial situation, we are entitled to request imme- delays in delivery or it being completely impossible to
The price valid at the date of despatch shall also apply diate handing over of the goods which are subject to deliver as a result of statutory or official export restric-
if the order was confirmed without prices being stated. reservation. Any time limited claims shall immediately tions, unless we act with intent or gross negligence suf-
When an order on call is placed, partial deliveries shall become due. fered by the Customer or other persons. The Customer’s
be invoiced at the price valid at the date of despatch. 9.6. If the value of the securities exceeds our claims by more duty to pay the agreed remuneration shall not be af-
Any request by the purchaser for subsequent modifica- than 20%, securities to a corresponding amount will be fected by disruptions in our performance as a result
tions shall entitle us to amend prices. released by us on request at our discretion. of export restrictions. We shall be entitled to withdraw
4. Conditions of payment 9.7. The extended retention of title (9.1.) does not apply to from the contract if, after the contract is signed, our
The invoiced sum is to be paid net within 30 days of prepayment orders that have been paid in full. performance is disrupted as a result of export restric-
date of invoice and delivery. If the purchaser is in de- 10. Warranty tions.
fault with any payment, we are entitled to claim interest 10.1. We expressly point out that all information and data 13. Place of performance and jurisdiction, applicable law
for such default at the normal rate of interest charged is given to the best of our knowledge and belief. The 13.1. The place of performance and the place of venue for
for current accounts. If we are able to prove that we user is solely responsible for the proper use of our pro- deliveries and payments andfor any litigation arising
have incurred greater losses as a result of the delay, ducts and he should check their suitability for the inten- between us andthe purchaser shall be the headquarters
we shall be entitled to claim compensation for such ded application. of our company.
damages. We are however entitled at any time, in the Fischer Elektronik do not assume any warranty, whe- 13.2. The relationship between the contractual parties shall
context of an ongoing business relationship, to execute ther expressed or implied, for the suitability, function or be regulated solely in accordance with the law in force
a delivery in full or in part only against an advance merchantibility of their products in specific or general in the Federal Republic of Germany. The regulations of
deposit. We shall declare a corresponding reserve at applications, and they cannot be held liable for acci- international uniform law, particularly the UN CISG,
the latest at the confirmation of the contract. dental or consequential damage due to non-observan- shall not apply.
5. Set-off, right to retention ce of the above.
Only claims which have been recognised by us or have 10.2. Claims for defects can only be considered if the
become legally binding may be offset against our in- purchaser has complied with their obligation to check
voices. Any right to a retention to be exercised by the goods and submit a complaint as per Sections 377,
purchaser in connection with our claims is explicitly 381 of the German Commercial Code [HGB]. If goods
excluded. In case of defects in the delivery, the rights have a defect attributable to us, we are obliged to Status as at: 26.08.2022
of the Purchaser remain unaffected, particularly with effect a cure, excluding the purchaser’s right to with- The latest T&Cs shall apply at all times. They may be down-
regards to point 10.3. of these GTC. draw from the contract or to reduce the purchase price loaded at www.fischerelektronik.de/en
 art. no. HEATSINKS SURFACES & CASES SURFACES

AL raw degreased aluminium

BZ raw pickled aluminium

LP outside black lacquered RAL 9005 / chrome-free transparent passivated

ME clear anodised

MI solderable surface

SA black anodised

TP chrome-free transparent passivated

art. no. CONNECTOR CONTACT SURFACE FINISH

G gold-plated

S selective gold-plated

Z tin-plated

art. no. RAL COLOURS ARTICLES

NB 5022 night blue system cases "RackCase" / shell cases

S 9005 deep black TG / shell cases / system cases "RackCase"

TB 5018 turquoise blue system cases "RackCase" / shell cases

UL 5002 ultramarine blue Plusline / shell cases

The surface coatings and colours listed here in the catalogue only represent the standard designs.
Other coating types and colours can be realised on request according to customer-specific requirements.
 kühlen to cool dissipation
to cool to protect to connect to cool to protect to connect schützen to protect protection
verbinden to connect connexion

f.cool.e f.case.e f.collect

Extruded heatsinks LED heatsinks Cooling aggregates C a s es 19’’ te chnolog y Acce ssorie s

Extruded heatsinks Cases Slip-Case for

LED-headsinks 19“ technology collecting the Fischer
Cooling aggregates Accessories catalogues
Thermally conductive mat.

Fischer Elektronik GmbH & Co. KG

Nottebohmstraße 28 · 58511 Lüdenscheid
GERMANY
10163199

Phone +49 2351 435- 0

Fax +49 2351 45754
[email protected]
www.fischerelektronik.de/en