Scribd
Upload
74 views

Arrival Check List - Dareen

The document provides a checklist of preparations for a vessel's bridge arrival at port, including checking engine readiness, navigational equipment, communications systems, arrival port information, weather reports, and securing vessel integrity through measures like closing tank openings and pen gates. Upon completion of checks, entries must be made in the vessel's log book. The checklist is to be signed by the master, officer on watch, and chief officer once end of passage is reached.

Uploaded by

raed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
74 views

Arrival Check List - Dareen

The document provides a checklist of preparations for a vessel's bridge arrival at port, including checking engine readiness, navigational equipment, communications systems, arrival port information, weather reports, and securing vessel integrity through measures like closing tank openings and pen gates. Upon completion of checks, entries must be made in the vessel's log book. The checklist is to be signed by the master, officer on watch, and chief officer once end of passage is reached.

Uploaded by

raed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Arab Ship Management Co.

Safety & Quality Management Manual


Document : CL:A7 Dareen Page: 1/1 Date: 27/05/2019
Title: -Bridge Arrival Port Preparation Issue: 1/1

Voyage From: To: Date:


A Tick (√ ) indicates the check has been performed and appropriate action taken
Upon completion of checks, entry to be made in vessel’s log book
1.Notice for stand by raised Time

2.Engine Room Informed and tested engine ahead and astern ,steering gear tried out Time

3.Arrival Port Information available / Minimum and maximum Depths for the port approach and berth

4. Vessel draft and heeling suitable for Arrival Port noted

5. Latest Weather reports and navigational warnings checked / assessed

6. ETA has been sent with all relevant information required to port authorities
Time
all communication established with the Port Authorities on official channels voyage details

7. All relevant charts and nautical publication up to date and course laid off (including ECDIS)

8.All Bridge Equipment/ Instrument turned On, tested, checked Time


AIS GYRO / MAGNETIC COMPASS AND REPEATERS
NAVTEX VDR
RADAR’S AUTO PILOT
ECDIS – Tried out as per ECDIS procedures GMDSS TESTS / CHECKS CARRIED OUT
ECHO SOUNDER BINOCULARS
GPS NAVIGATIONAL LIGHTS AND SHAPES
WINDOWS WIPERS / clear view arrangements CLOCKS synchronized
BNWAS MF/HF RADIO

9.All Available Communications tested, checked Time


VHF Radio installation Aldis Lamp and Signaling Lights
Walkie Talkies Whistles
Bridge to engine room

10.Mooring & Anchorage Arrangements


Crew members called for stations Anchors Ready
Power On Deck

11. Pilot Embarkation / disembarkation arrangements checked and ready for use

12.Vessel integrity
Fodder Tank Openings Closed and Secured
Mooring Winches Fwd and Aft Ready for Use
Mooring Ropes Checked for use
Rat Guards ready for use
Animal loading and discharge Ramps Secured (Roof
Deck)
Gangway’s Checked and Ready to Use
All Pen Gates Closed and secured (Livestock Cargo Decks)
Ramp and provision crane secured

13. vessel fire detection system


Fire detection panel activated (ON Position ) for all zones
Any zone failures to be assessed on the spot

15.End of Passage (EOP) Time

Master Signature Officer on watch Chief Officer


and stamp Signature Signature

-------------------- -------------------- --------------------

You might also like