0% found this document useful (0 votes)
204 views

ASI4518R10V06

This document provides specifications for the EasyRET 12-Port Antenna with Integrated RCUs model ASI4518R10v06. It includes electrical and mechanical properties of the antenna as well as specifications for the integrated remote electrical tilt (RET) unit. Key details include the antenna's frequency ranges, gain patterns, power handling capabilities, dimensions, weight and environmental limits. Integration and control of the RET functions are enabled via an 8-pin connector following IEC 60130-9 standards.

Uploaded by

FERRERO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
204 views

ASI4518R10V06

This document provides specifications for the EasyRET 12-Port Antenna with Integrated RCUs model ASI4518R10v06. It includes electrical and mechanical properties of the antenna as well as specifications for the integrated remote electrical tilt (RET) unit. Key details include the antenna's frequency ranges, gain patterns, power handling capabilities, dimensions, weight and environmental limits. Integration and control of the RET functions are enabled via an 8-pin connector following IEC 60130-9 standards.

Uploaded by

FERRERO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-2690-

65/65/65/65/65/65-17i/17i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 12-Port Antenna with Integrated RCUs - 2.6m
Model: ASI4518R10v06

Antenna Specifications

Electrical Properties
2 x (690 - 960) 4 x (1695 - 2690)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45π , -45π
Electrical downtilt (π) 0 - 10 , continuously adjustable , each band separately 2 - 12 , continuously adjustable , each band separately
at mid Tilt 15.8 16.5 16.7 17.0
over all Tilts 15.5 ρ0.5 16.3 ρ0.5 16.5 ρ0.5 16.7 ρ0.5

Gain at mid Tilt 16.6 17.0 17.2 17.6


Bottom
(dBi) over all Tilts 16.4 ρ0.6 16.8 ρ0.5 17.0 ρ0.5 17.4 ρ0.5
at mid Tilt 16.6 17.0 17.2 17.6
Top
over all Tilts 16.4 ρ0.6 16.8 ρ0.5 17.0 ρ0.5 17.4 ρ0.5
Side lobe suppression for first
> 16 > 17 > 17 > 17 > 16 > 16 > 16 > 16
side lobe above main beam (dB)
Horizontal 3dB beam width (π) 68 ρ5 65 ρ5 62 ρ5 60 ρ5 65 ρ5 63 ρ5 61 ρ5 60 ρ5
Vertical 3dB beam width (π) 8.8 ρ0.7 8.0 ρ0.6 7.8 ρ0.5 7.5 ρ0.5 7.0 ρ0.7 6.0 ρ0.5 5.5 ρ0.4 5.0 ρ0.5
VSWR < 1.5
Cross polar isolation (dB) ! 28
Interband isolation (dB) ! 28
Front to back ratio , ρ30π (dB) > 23 > 26 > 26 > 26 > 26 > 27 > 27 > 28
Cross polar ratio (dB) 0π > 17 > 18 > 19 > 20 > 15 > 16 > 17 > 17
Max. power per input (W) 500 (at 50ć ambient temperature) 250 (at 50ć ambient temperature)
Total power (W) 1200 (at 50ć ambient temperature)
Intermodulation IM3 (dBc) " -153 (2 x 43 dBm carrier)
Impedance (#) 50
Grounding DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet in XML format is available.

106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2769 x 429 x 196
Packing dimensions (H x W x D) (mm) 2980 x 530 x 275
Antenna weight (kg) 45.6
Clamps weight (kg) 5.8 (2 units)
Antenna packing weight (kg) 66.1 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
1787

Radome colour Light grey


2769

Operational temperature (ć) -40 .. +65


Frontal: 1320 (at 150 km/h)
Wind load (N) Lateral: 380 (at 150 km/h)
Rear side: 1320 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 12 x 4.3-10 Female
Connector position Bottom

Accessories
Item Model Description Weight Units per antenna

Mechanical downtilt:
Downtilt kit ASMDT0F01 3.1 kg 1 (Separate packing)
0-8π

186
DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-2690-
65/65/65/65/65/65-17i/17i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 12-Port Antenna with Integrated RCUs - 2.6m
Model: ASI4518R10v06

Integrated RET Specifications

Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 6 (motor activated, 12V)
Power consumption (W)
< 1.5 (stand by, 12V)
Adjustment time (full range) (s) < 65 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
3 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET

2LnH Band
6-14 Ports
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety - Equipment installed outdoor), EN 55022 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM

Integrated RET S/N:


HWMxxx……LTy2
LTy2 RTy4
HWMxxx……LBy1
HWMxxx……...Lr1

HWMxxx...…RBy3 LBy1 RBy3

HWMxxx...…RTy4
Lr1 Rr2
HWMxxx…..…Rr2
r - Red y - Yellow
L - Left array R - Right array
T - Top array B - Bottom array

Pattern sample for reference

690 - 960 MHz 1695 - 2690 MHz

187

You might also like