IN - Assignment - APU-APD1F2206
IN - Assignment - APU-APD1F2206
Page 1 of 9
INTRODUCTION TO NETWORKING
Group Assigment (50%)
Intake: APU1F2206CS(CYB)\APD1F2206CS(CYB)\APU1F2206CS\APD1F2206CS\
APU1F2206CS\(IS)\APD1F2206CS(IS)\APU1F2206IT\APD1F2206IT\APU1F2206SE\
APD1F2206SE
Hand Out Date: 3rd Week of Semester
Due Date – Individual Work : 2nd September 2022 - Word Count Limit: 1500 per person
Due Date – Team Work : 30th September 2022 - Word Count Limit: 1000 per person
Lecturer: Dr. Kamalakannan Machap\Ms. Zaireeda Mohd Fauzee
Email:[email protected]\[email protected]
This assignment aim is to allow students to design and configure a LAN topology by applying basic
principles of wired and wireless network, together with configuration of network devices (including
routers & switches) by using Cisco Packet Tracer simulation tool. Students are also expected to be
able to design their IP addressing scheme with subnetting to segment their network.
1.Assessed Learning Outcomes:
CLO2: Form the local area network design and configuration using simulation tool for the
given scenario. (A2, PLO6)
CLO3: Work in a team to justify the topology and IP addressing plan based on the network
design (A3, PLO4)
Vista Court A is the academic area, designed to have smart classrooms, library and computer
labs, auditorium, multipurpose hall and cafeteria. The reception, waiting area, auditorium, and
cafeteria are located at 1st floor. All the events hosted by this school will make use of this 1st
floor for private or public use. The academic area such as smart classrooms, library and
computer labs are loacted at the 2nd floor.
The second building, which is the Vista Court B is dedicated for administrative area. The main
administartive office, server room is located at the 1st floor with a control room for the
Technical Assistant to be on stanby to manage and monitor the network. While for the 2 nd floor
of this building, its where the staff room and staff lounge are located together with the corporate
office (Manager room).
Your team is appointed to assist with the proposal to plan for a suitable network design for this
new project. CCTV and WIFI is to apply for the necessary area to montior the entire buildings.
The main objective is to identify the requirement and conduct a research to propose for a
The findings and outcome of your research should be arranged in a proper flow to be presented to
the Technical team who are involved in the full design of the network. In addition, prepare a Cisco
Packet Tracer diagram as a proof of concept for your research work.
3. The group assignment should be completed in a group of not more than 4 members. The
group assignment and packet tracer file must be submitted by the group leader.
4. Select the team leader among the group members for the group assignment.
5. All submission should be done in Moodle
6. Double check the work before online submission (Peer Evaluation form and Self-
Reflection, etc).
1. The assignment should attach front cover, table of contents and attach the completed Work
Breakdown Structure (WBS) must be digital signed and agreed by all group members.
2. You are required to build a complete computer network environment for the scenario,
supported with a good research work.
3. Design the floor plan using any designing tool with very good justification and provide
configuration of the logical network diagram using Cisco Packet Tracer Submit. The softcopy
of floor plan and network diagram (configuration) together with the assignment.
4. Your report must be typed using Microsoft Word with Times New Roman font size 12. Report
should be in 1.5 spacing.
5. The report has to be well presented and should be typed. Submission of reports that are
unprofessional in its outlook will not fare well when marks are allocated.
6. The report should have a one (1”) margin all around the page as illustrated below:
1 inch 1 inch
1 inch
1 inch
1 inch
1 inch 1 inch
7. Plagiarism is a serious offence and will automatically be awarded zero (0) mark.
Level 1 Asia Pacific University of Technology & Innovation
202206
Introduction to Networking CT043-3-1
Page 3 of 9
8. All information, figures and diagrams obtained from external sources must be referenced using
the Harvard referencing system accordingly.
6. Conclusion
7. References (APA format)
8. Alternate Roles
9. Peer Evaluation
10. Submit the entire network diagram packet tracer file.
CLO2: Form the local area network design and configuration using simulation tool for the
given scenario
Introduction
- Objective
- Assumptions (number of hosts, rooms, labs, etc.)
Individual
Floor plan- Floor plan- Floor plan- Floor plan-
Component
(Layout) (Layout) (Layout) (Layout)
Justification Justification Justification Justification
Configuration/Demonstration
CLO2: Work in team to justify the topology and IP addressing plan based on the network
design
(PLO4: Interpersonal Skills)
For students who have to re-do the assignment (failed the 1st attempt), produce the assignment
individually. Complete both sections and choose one building design for the new submission.
Group Assignment
Assessment Criteria
Marks Awarded
Network Diagram 10
Documentation 5
Referencing 5
Configuration 10
Demonstration 10
Topology Justification 10
Documentation 5
Referencing 5
Alternate Roles 5
Peer Evaluation 5
Not able to Minimal use of Full use of Good use of Very good use
use referencing referencing tools referencing of referencing
referencing tools in in Microsoft tools in tools in
tools in Microsoft Word. Microsoft Microsoft Word.
Microsoft Word. Word.
Word. Enough Very good
Minimal in- references and Recent source quality of
No in-text text citation citation in the of references references used,
Referencing
citation and and references report. No issue used, with with proper
very minimal used. Minor in the proper citation and
references. issues in the referencing reference list. reference list for
Major issues referencing format Limited in-text all facts and
in the format. citation in the diagrams used
referencing report
format.