sensors

Review
Machine Learning for Industry 4.0: A Systematic Review Using
Deep Learning-Based Topic Modelling
Daniele Mazzei and Reshawn Ramjattan *

Department of Computer Science, University of Pisa, Largo B. Pontecorvo 3, 56127 Pisa, Italy
* Correspondence: [email protected]

Abstract: Machine learning (ML) has a well-established reputation for successfully enabling au-
tomation through its scalable predictive power. Industry 4.0 encapsulates a new stage of industrial
processes and value chains driven by smart connection and automation. Large-scale problems within
these industrial settings are a prime example of an environment that can benefit from ML. However,
a clear view of how ML currently intersects with industry 4.0 is difficult to grasp without reading an
infeasible number of papers. This systematic review strives to provide such a view by gathering a
collection of 45,783 relevant papers from Scopus and Web of Science and analysing it with BERTopic.
We analyse the key topics to understand what industry applications receive the most attention and
which ML methods are used the most. Moreover, we manually reviewed 17 white papers of consult-
ing firms to compare the academic landscape to an industry perspective. We found that security and
predictive maintenance were the most common topics, CNNs were the most used ML method and
industry companies, at the moment, generally focus more on enabling successful adoption rather
than building better ML models. The academic topics are meaningful and relevant but technology
focused on making ML adoption easier deserves more attention.

Keywords: machine learning; industry 4.0; topic modelling; deep learning; systematic review

Citation: Mazzei, D.; Ramjattan, R

Machine Learning for Industry 4.0: A
Systematic Review Using Deep 1. Introduction
Learning-Based Topic Modelling. Industry 4.0, or the fourth industrial revolution, expresses the rapid changes to the
Sensors 2022, 22, 8641. https:// industrial world due to the combined improvements of technologies that join the physical
doi.org/10.3390/s22228641 and digital worlds [1]. These technologies refer to the inter-connectivity of the internet
Academic Editor: Óscar García
of things (IoT), robotics and edge devices, as well as the smart automation brought by
artificial intelligence [2–4]. Considering the large scale of industrial problems, the proven
Received: 5 October 2022 success in scalability and automation of Machine Learning’s (ML) predictive power holds
Accepted: 5 November 2022 a lot of potential to thrive here. Hence, in recent years, researchers and companies are
Published: 9 November 2022
exploring ML for industry 4.0 more and more, seeking these benefits [5]. Bertolini et al. put
Publisher’s Note: MDPI stays neutral forward a review discussing the applications of Convolutional Neural Networks (CNNs)
with regard to jurisdictional claims in and Autoencoders to industry problems [6]. Similarly, Gupta and Farahat presented a
published maps and institutional affil- tutorial at the 2020 ACM SIGKDD Conference on Knowledge Discovery and Data Mining,
iations. highlighting new methods for industrial AI such as deep Reinforcement Learning (RL) [7].
However, industrial applications of ML are a complicated space due to the number of
different intersecting domains, and the spike in interest over recent years, while positive,
has made it challenging to thoroughly follow the trends of published work. A clear view of
Copyright: © 2022 by the authors. the area at scale allows interested parties to see evidence of rapidly increasing interest and,
Licensee MDPI, Basel, Switzerland.
more specifically, where the attention of the community lies. This information is critical
This article is an open access article
because it allows one to infer key points such as what research direction can be of useful
distributed under the terms and
contribution or what solution directions might be practical and worth real use.
conditions of the Creative Commons
For analysing and extracting useful insights from large datasets of text, natural lan-
Attribution (CC BY) license (https://
guage processing (NLP) techniques have shown positive results [8]. Wang and Zhang
creativecommons.org/licenses/by/
4.0/).
reviewed different means of recognizing method entities in academic literature using

Sensors 2022, 22, 8641. https://doi.org/10.3390/s22228641 https://www.mdpi.com/journal/sensors

Sensors 2022, 22, 8641 2 of 26

NLP [9]. Firoozeh et al. also examine keyword extraction methods as a means of extracting
knowledge from large text datasets [10]. Keyword extraction is a powerful means of un-
derstanding what an entire corpus is about. Topic modelling methods, on the other hand,
can count and cluster important words in order to identify the major themes within the
corpus [11]. An example of this is seen in the work by Jacobi et al. where they apply a
topic modelling technique, Latent Dirichlet Allocation (LDA), to a news corpus [12]. This
approach allows one to discover topics of semantic similarity with richer depth and less
manual input than using keyword extraction or simple statistical counts on the corpus.
This paper aims to provide a clear view of how ML methods intersect with industry
4.0 problems by analysing academic publications using NLP techniques. Through topic
modelling, we were able to extract the main subareas of research from a dataset of scientific
publications relevant to ML in industrial settings. Further analysis also allowed us to
compare the use of ML techniques within each identified topic. Through these extractions,
we answered the following research questions:
1. What are the industry 4.0 problems where ML solutions see the most discussion?
2. Which ML methods are used the most in these areas?
3. How do the areas focused on in the academic literature compare to the areas of focus
in the white papers of top industrial companies?
Instead of a traditional manual review of papers, the focus of this review is on the
automatic extraction of insights in the field from a large unreadable corpus of papers.
However, brief descriptions of a subset of the well-known ML methods and industry 4.0
problems are still important for a thorough introduction. Hence, the remainder of the
introduction section will highlight these areas, but the systematic review is not limited
to them.

1.1. Machine Learning Methods

1.1.1. Learning Paradigms
Before presenting specific methods, we must first clarify the major categories of
learning paradigms they fall into.
1. Supervised Learning. This refers to methods that are trained using labelled examples.
They can be highly accurate and trustworthy if the inferences made in real use are
similar enough to the examples used during training.
2. Unsupervised Learning. This refers to methods that are used on unlabelled data. They
are relatively less accurate but can be effective depending on the scenario and problem.
3. Reinforcement Learning. This refers to methods that reward positive or correct
behaviour and punishes incorrect behaviour. The difference is clarified here as it
does not fall under the aforementioned learning paradigms but more on this type of
learning is discussed in its relevant section below.

1.1.2. Neural Networks

An artificial neural network (ANN) is generally comprised of an input layer, one or
many hidden layers of neurons and an output layer. An artificial neuron consists of input,
weights applied to each input, a bias that is applied to the sum of the weighted inputs,
and an activation function that converts the result to the expected form of the output (for
example, the sigmoid function for a classification value of 0 or 1) [13–15].
A neural network with a single hidden layer is typically called a perceptron network,
while networks with many hidden layers are referred to as Deep Neural Networks or
Deep Learning and are at the core of many modern and popular ML methods [16,17].
The various ML techniques we are about to discuss are deep neural networks that use
different structures of layers as well as specific mechanics relevant to their types of data
and problems.
Sensors 2022, 22, 8641 3 of 26

1.1.3. Convolutional Neural Networks

Convolutional Neural Networks (CNNs) are one of the most popular and successful
deep learning architectures. Although based on Neural Networks, they are mainly used
in the field of Computer Vision (CV), for image-based pattern recognition tasks such as
image classification.
Aside from input and output, the CNN architecture is typically composed of these
types of layers: convolutional layers, pooling layers and fully connected layers. A convo-
lutional layer computes the scalar product between a small region of the input image or
matrix and a set of learnable parameters known as a kernel or filter. These calculations
are the bulk of the CNN’s computational cost. The rectified linear unit (ReLU) activation
function is also applied to the output before the next layer. A pooling layer performs
downsampling, by replacing some output with a statistic derived from close information.
This reduces the amount of input for the next layer, therefore reducing computational
load. A fully connected layer is where all neurons are connected as in a standard ANN.
This followed by an activation function helps produce scores in the expected format of the
output (i.e., a classification score). Despite being computationally expensive, CNNs have
seen many successful applications in recent years [18–20].

1.1.4. Recurrent Neural Networks

Recurrent Neural Networks (RNNs) perform particularly well on problems with
sequential data such as text or speech or instrument readings over time. This is because,
unlike other deep learning algorithms, they have an internal memory that is meant to
remember important aspects of the input. A feedback loop instead of forward-only neurons
is what enables this memory. The output of some neurons can affect the following input to
those neurons [21,22].
However, because of the vanishing and exploding gradient problems caused by the
way the neurons affect many others through memory in RNNs, their ability to learn
effectively becomes limited. Hence, the Long Short-Term Memory (LSTM) and Gated
Recurrent Unit (GRU) methods aimed to solve this issue and rose to popularity as well.
They do so by using gates to determine what information to retain [23–26].

1.1.5. Support Vector Machines

Support Vector Machines (SVMs) are linear models that can be used for both clas-
sification and regression problems. SVMs approximate the best lines or hyperplane for
separating classes by maximising the margin between the line or hyperplane and the closest
data points [27–29]. Although this best-fit separator can be used for regression, it is more
commonly used for classification problems. It is considered to be a traditional ML method
compared to its deep learning counterparts but can achieve good results with relatively
lower compute and training data requirements.

1.1.6. Decision Trees and Random Forests

Decision trees are graphs comprised of nodes that branch off based on thresholds.
They can be constructed by recursively evaluating nodes or features to find the best
predictive features [30,31]. By itself, it can be used to make predictions, but to increase the
performance of the method and mitigate overfitting, an aggregated collection of decision
trees called a random forest can be used. Random forests as an ensemble learning method
can accomplish this by training some trees on subsets of the data or features and aggregating
the results [32,33]. The technique of training trees on different samples or subsets of data is
called bootstrap aggregating or “bagging” [34].
They generally outperform decision trees but, depending on the data and problem,
may not achieve an accuracy as high as gradient-boosted trees. Boosting is a technique
where the random forest is an ensemble of weak learners or shallow decision trees that
perform slightly better than guessing [35]. The intuition here is that weak learners are too
simple to overfit and therefore their aggregated model is less likely to overfit. Gradient
Sensors 2022, 22, 8641 4 of 26

boosting builds on top of this by introducing gradient descent to minimize the loss in
training [36,37]. An example of a popular and practical library implementation of gradient
boosting is XGBoost [38].
Much like the aforementioned SVMs, algorithms based on decision trees are considered
to be more traditional than deep learning methods and work especially well in situations
with low compute and limited training data.

1.1.7. Autoencoders
Autoencoders are ANNs that follow the encoder–decoder architecture. They aim to
learn efficient encodings of data in an unsupervised way. The encoder is responsible for
learning how to produce these lower dimension representations from the input, while the
decoder reconstructs the encodings to their original dimensions [39–41]. Autoencoders
are commonly associated with dimensionality reduction, as a deep learning approach to
the problem traditionally handled by methods such as Principal Component Analysis
(PCA) [42]. Reconstruction by the decoder can be useful for evaluating the quality of
encodings, generating new data or detecting anomalies if performance significantly differs
from normal cases. So, generally, some common applications of autoencoders include
anomaly detection, especially in cyber-security, facial recognition and image processing
such as compression, denoising or feature detection [43–45].

1.1.8. Reinforcement Learning

Unlike the previously described supervised and unsupervised learning methods,
Reinforcement Learning (RL) trains models by rewarding and punishing behaviour [46,47].
The intuition behind this is to let models explore and discover optimal behaviours instead
of trying explicitly to train that behaviour with many samples. In RL, the model is defined
as an agent that can choose actions from a predefined set of possible choices. The agent
receives a sequence of observations from its environment as the basis or input for deciding
on actions. Depending on the action chosen the agent is rewarded or punished for it to
learn the desired behaviour.
This training is accomplished through defining concepts such as a policy, reward
function and value function. A policy is a function that defines the agent’s behaviour, it
maps the current observable state to an action and can be either deterministic or stochastic.
A Value function estimates the expected return or reward of a certain state given a policy
function. This allows the agent to assess different policies in a particular situation. The re-
ward function returns a score based on the agent’s action in the environment’s state (i.e., a
state–action pair).
Deep RL is attained when deep neural networks are used to approximate any of
the prior mentioned functions [48]. Proximal Policy Optimization (PPO), Advantage
Actor-Critic (A2C) and Deep Q Networks (DQN) are some examples of popular Deep RL al-
gorithms. RL also sees successful practical use areas such as games, robotic control, finance,
recommender systems and load allocation in telecommunications or energy grids [49–51].

1.1.9. Nearest Neighbour

The Nearest Neighbour (NN) method is a simple algorithm that finds a defined
number of samples closest to the new input point [52–54]. It is often used as a method for
classifying new points based on the closest stored points, where closeness as a metric of
similarity can be defined but is usually standard euclidean distance. Computation of the
nearest neighbours can be conducted by brute force, or by methods devised to address
brute force’s shortcomings such as K-D tree or Ball Tree [55,56]. Despite being such a simple
method, NN has shown to be effective even for complex problems.

1.1.10. Generative Adversarial Networks

Generative Adversarial Networks (GANs) are unsupervised models concerned with
recognizing patterns in input data to produce new output samples that would pass as
Sensors 2022, 22, 8641 5 of 26

believable members of the original set. The GAN architecture consists of a generator, a DL
model for producing new samples, and a discriminator, a DL model for discerning fake
samples from real ones. The discriminator receives feedback based on the known labels
of which samples are real and the generator receives feedback based on how well the
discriminator discerns its output. Thus, the networks are trained in tandem [57]. Despite
being the most recent of the discussed methods (first described in 2014), its adoption in real
cases is growing rapidly given the high potential usefulness of generating data points to
support meaningful problems with limited data availability. Direct applications aside from
training data synthesis also include, among others, image processing such as restoration or
superresolution, image-to-image translation, generating music and drug discovery [58,59].

1.2. Industry 4.0 Problems

1.2.1. Fault Detection and Diagnosis in Maintenance
Considering the strong implications for safety, efficiency and cost, monitoring for
machine malfunctions in an effective manner is a task that is both common and of high
importance in the industrial world. Therefore, the scalable automation of these Fault
Detection and Diagnosis (FDD) systems through ML techniques is one of the most popular
types of ML applications in the field [60–62].
Given the nature of many faults such as signs of deterioration or surface defects
on manufactured products, visual inspection is a regular and meaningful aspect of FDD
systems. Hence, CNNs are regularly utilized in systems that aspire to automate this [63–68].
However, with the unique variety of the machines, products and components FDD
systems must deal with, procuring large image datasets for each of them to leverage CNNs
is no easy task. Time-series sensors that record metrics such as pressure, vibration or
temperature are far more common in industry settings. So models that attempt to automate
FDD through those relevant data types are also seen. With the success and popularity of
CNNs, some still try to apply them to this data by using visualizations of the time-series
data [69]. However, models that specifically focus on these data types such as RNNs,
although not as commonly seen, are developed and deserve as much attention [70–72].

1.2.2. Predicting Remaining Useful Lifetime

In a similar vein to FDDs, the efficiency and planning of industry maintenance can be
empowered by predicting how much useful time a machine or part has left. This can be
applied to components that need regular replacement such as bearings or batteries [73,74],
or in more challenging cases, can be sudden rapid failures in complex processes such
as ion milling [75]. With the stronger temporal aspect to this problem, sequence models
are more commonly seen [75–77] but creative approaches using other methods such as
autoencoders [78], decision trees [79], RL [80] and GANs [81] have also been presented.

1.2.3. Autonomous Operation

Automation of repetitive operations is another impactful area for leveraging ML in
industry 4.0. Robotic operation is one of the most direct approaches to this and most
commonly makes use of CNNs or RL or both [82–84]. RL is an effective method for de-
veloping agents or models that are dynamic and adaptable to the same tasks in different
environments, while CNNs are useful here for recognizing visual features in tasks such
as object detection or aiding RL agents in observing the environment space. These ap-
plications can be as generic as automated pick and place [85] or as use-case specific as,
for example, automating coastal cranes for shipping containers [86]. UAV navigation for
smart agriculture is also another strong growing application worth mentioning [87,88].
However, autonomous operation also reaches other aspects of industrial businesses
such as customer service or marketing operations [89,90]. As these domains are inherently
more digital, they are a source of simpler and easier but still effective forms of automation.
Sensors 2022, 22, 8641 6 of 26

1.2.4. Forecasting Load

Load forecasting refers to predicting changes in demand over time, typically regarding
energy or electrical grids. Load forecasting is critical for adequate preparation to cater for
increased demands. For example, consider a power company that may need to acquire
additional materials such as natural gas to meet the expected demands. Accurate fore-
casting will not only result in better services but can significantly improve economic and
environmental efficiency in their energy usage [91,92].
As a temporal regression problem, this industry 4.0 use case is one of the few where
deep sequence models such as RNNs or LSTMs are used much more than alternative
models [93–95]. Furthermore, while there is evidence that shows they do perform well,
they are not exempt from common industrial challenges in adoption and practical use such
as data availability or complex system integration.

1.2.5. Optimizing Energy Consumption

The case of optimizing energy consumption in industrial settings, in some ways, can
be viewed as an extension of the previously described load forecasting problem. There is
also some similar usage of ML, in that models are often designed for forecasting energy
consumption [96,97].
These forecasts can be useful in supporting decisions to optimize the response to that
demand. An example of this is seen in work conducted by [98], where they optimize de-
mand responses through a rule and ML-based model for controlling and regulating a heat
pump and thermal storage. Similarly, in [99], IoT-based data collection was used to opti-
mize energy consumption for a food manufacturer by providing them with analysis results
to support decisions. Other examples of specific approaches to optimizing energy consump-
tion include offloading ML compute to the edge or fog [100], using RL for optimizing the
trajectory of UAVs in intelligent transportation systems and smart agriculture [101,102] and
using the ant colony optimization algorithm to improve routing performance and therefore
energy consumption in wireless sensor networks [103].

1.2.6. Cyber-Security
One of the most general and common use cases faced in industry 4.0 regardless of
the specific field is Cyber-Security. As digitization increases more and more so does the
need to sufficiently protect those digital assets and processes. The importance and priority
of security are also notably higher for supervisory control and data acquisition (SCADA)
systems [104]. This is because SCADA is a category of applications for controlling industrial
processes and therefore a digital interface to large-scale physical components. Furthermore,
the historic ramifications of famous attacks such as Stuxnet act as evidence of the threat
and dangers posed by poor security practices [105].
Malicious attacks can be viewed as very unusual behaviour the system does not expect
in regular use, and because of this, from an ML standpoint it is often formulated as an
anomaly detection problem. Traditional methods such as k-Nearest Neighbours-based
clustering algorithms or decision trees can be used to approach this problem [106–108],
but in recent years deep autoencoders have seen a lot of successful use [109–112]. This is
performed by training on data, such as activity logs or network requests, that is almost all
normal and non-malicious. If the malicious activity goes through the autoencoder then,
because it is anomalous and unlike previous data, the decoder would reconstruct it more
poorly than usual.
It must be noted however that although the formulation of anomaly detection is
effective and popular, it is not perfect in the case of complex attack sequences trying to
mimic normal behaviour. To that end, other methods for security and intrusion detection
are still just as important. For example, RL has also seen use in vulnerability analysis by
seeking to train agents to be both attackers and defenders for the system being evaluated
and learn complex attack behaviours [113–115].
Sensors 2022, 22, 8641 7 of 26

1.2.7. Localizing Assets

While the Global Positioning System (GPS) is often sufficient for determining location
in outdoor environments, the indoor localization of assets is a more challenging problem
due to the lack of line of sight to satellites. This is useful for several applications including
security by tracking entry to unauthorized areas, factory safety by ensuring the right need
number of people is maintained and data analytics by providing an additional means of
monitoring processes and key performance indicators (KPIs) such as idle time or loading
time [116].
For indoor localization Wi-Fi fingerprinting has become one of the most common
technology choices as it does not require a line of sight and can work with any Wi-Fi-
capable device without any additional hardware [117]. Deep learning has successfully
supported this area by enabling cases such as self-calibrating fingerprint databases for
localization with autoencoders [118] or recognizing received signal strength (RSS) patterns
in device-free localization with autoencoders and CNNs [119,120].

1.2.8. Soft Sensors

The complexity of industrial processes, especially in cases such as the chemical, biopro-
cess or steel industries, is often reflected in a large number of sensor metrics and variables
for monitoring, controlling and optimizing these processes. Soft Sensors are software-based
data-driven ways to estimate, simplify and model these large numbers of physical sensors
with varying constraints [121,122]. By having this representation of the process’s state,
it becomes easier to detect faults, recognize changes in performance through tracking
and optimize decisions in scheduling or supply chain management. Traditional statis-
tical methods such as PCA or support vector machines (SVM) have often been applied
to soft sensing [123], but modern methods such as autoencoders that can produce latent
representations of data well have also seen use [111,124].

1.2.9. Logistics and Resource Allocation

The efficiency of logistical issues such as delivery schedules, manufacturing pipelines,
raw material management and the allocation of resources throughout all processes are
incredibly important to lowering costs and maximizing productivity in industrial compa-
nies [125,126], while these issues are still handled quite well by optimization algorithms
such as particle swarm or ant colony optimization [127–131]. There has been increasing
interest and usage of RL for these problems [132,133]. RL and its exploratory behaviour-
driven means of solving problems can allow for greater flexibility in adapting to unforeseen
circumstances, especially in the case of the ever-changing and unique needs some compa-
nies may have. That being said, RL solutions are complex to develop and implement as is,
this becomes even more challenging when companies must find a way to integrate them
into their already complex processes so optimization algorithms still stand as the stronger
simpler source of solutions.

2. Related Works
There have been several reviews and surveys in the space of ML for industry 4.0. Some
focus on specific ML application areas such as predictive maintenance [60,134,135], soft
sensing [136] and fault detection [137]. Some try to be more comprehensive, looking at
ML applied to an entire industry or common pipelines, such as manufacturing [138–142],
transportation [143,144] and energy systems [145,146].
While others, in a similar vein to this paper, aim to cover the entire area of ML
for industry 4.0. For example, the tutorial by Gupta and Farahat exemplified impactful
industrial applications based on categories of ML methods [7]. Similarly, work in [142]
and [147] provide an overview of how ML methods can enhance solutions to industrial
problems. However, although a review based on manually read papers can provide
an in-depth analysis, they are limited to amounts that can be feasibly read and only
observe a limited sample of the industry 4.0 literature. The aforementioned reviews
Sensors 2022, 22, 8641 8 of 26

are useful and impactful works, but cannot provide insight on some questions, such as
what industrial business functions receive the most attention or which receive too little,
without quantitative results.
Hence, systematic reviews of this nature have also been explored, for example by
Bertolini et al. [6]. They first curated a dataset of papers by querying the Scopus, Web of
Science and Google Scholar databases. They then performed a series of restrictions to refine
the dataset down to 147 papers which they manually reviewed. A similar approach was
taken by Liao et al. by manually vetting papers included in their analysis [148]. Such an
approach can extract highly relevant and representative papers for detailed insights, such
as key applications and techniques, through manual review.
Even so, larger-scale insights can be attained by working with the bigger datasets that
are possible given the massive trustworthy databases available. Lee and Lim explore an
industry 4.0 review based on text-mining and provided insightful clarity on the state of the
field [149]. Nonetheless, their method was only semi-automated and included a limited
dataset of 660 articles up to 2018. Advanced NLP methods, specifically Topic Modelling,
enable the automated analysis of large-scale document sets that are infeasible for manual
reading. The effectiveness of Topic Modelling for analysing research fields was exemplified
by the work of Mazzei et al. surveying Social Robotics [150] and Atzeni et al. observing
ML and Wi-Fi [151]. This approach can be useful for understanding the space at large by
allowing the insights to be truly data-centric rather than heavily influenced by the sampling
method. That is, its benefit over manual reviews is that it can cover a vast number of
publications, infeasible for manual reading, and discover its topics. To the best of our
knowledge, at the time of writing, there are no systematic reviews such as this for ML in
industry 4.0.

3. Methodology
This section will detail the steps behind obtaining, preparing and analysing our data
with respect to our goals and previously discussed approach. We break down the method-
ology into the steps of paper gathering, preprocessing, meta-analysis, topic modelling and
topic analysis.

3.1. Paper Gathering

Our dataset curation follows the structure provided by the PRISMA statement for
reporting on systematic reviews. Figure 1 illustrates the structure followed. Note that all of
the report screening was completed after retrieving the data due to the limitations of the
database APIs used.
The papers retrieved for this study were sourced from Scopus and Web of Science via
their respective APIs. These databases are commonly used for systematic reviews and their
comprehensiveness has been studied [152,153]. The query presented in Listing 1 was used
for both sources. The query constrains results to mention both a term referring to industrial
settings as well as a term strongly relevant to machine learning or some of its most popular
methods. Due to the limitations of the database providers, only paper titles, abstracts and
metadata were collected.

Listing 1. Paper Retrieval Query.

( ‘ i n d u s t r i a l ’ OR ‘ i n d u s t r y 4 . 0 ’ )
AND
( ‘ deep l e a r n i n g ’ OR ‘ machine l e a r n i n g ’
OR ‘ a r t i f i c i a l i n t e l l i g e n c e ’ OR ‘ c o n v o l u t i o n a l neural ’
OR ‘ r e c u r r e n t n e u r a l net ’ OR ‘ long s h o r t −term memory ’
OR ‘ deep autoencoder ’ OR ‘ r e i n f o r c e m e n t l e a r n ’
OR ‘ g e n e r a t i v e a d v e r s a r i a l network ’ OR ‘ deep neural ’ )
Sensors 2022, 22, 8641 9 of 26

Figure 1. PRISMA flow diagram of dataset curation. ** Count includes exclusions by both humans
and automated tools.

Scopus returned 42,072 papers and Web of Science returned 71,989. After removing
duplicates, the dataset had 71,074 papers with 21,283 and 49,825 coming from Scopus and
Web of Science, respectively. We then restricted the dataset to papers from the most recent
6 years because changes in the trends of ML and data analytics are rapid, and we are more
interested in the currently prevailing topics than those of a decade ago.
Figure 2 shows Google Trends’ interests over time for Machine Learning and indus-
try 4.0. There was a substantial increase in interest for both topics beginning in January 2016.
Furthermore, Figure 3 shows the publications over time from the initial papers retrieved,
and there is a clear spike in the number of papers from 2016 onward. These observations
further support our decision to restrict our analysis to the last 6 years. Hence, the final
corpus consisted of 45,783 papers from January 2016 to February 2022.
Sensors 2022, 22, 8641 10 of 26

Figure 2. Google Trends’ interest over time for Machine Learning and industry 4.0.

×104
1.4

1.2

0.8
Count

0.6

0.4

0.2

2000 2005 2010 2015 2020

Year
Publications
Publications with ≥ 5 citations

Figure 3. ML in industry 4.0 publications and citations since 1999.

3.2. Preprocessing
Data cleaning tasks firstly consisted of catering for the differences in the fields returned
by the two databases in order the merge paper sets for analysis. Secondly, the main text
corpus to be analyzed was prepared. This included the following: combining the title,
keywords and abstract fields, converting all characters to lowercase, lemmatization and
lastly, removing punctuation, digits and stopwords.

3.3. Meta-Analysis
The preliminary analysis was aimed at supporting our attempt to answer the research
questions targeted in Section 1. This meta-analysis included: a plot of papers over time,
a count and comparison of paper source types, and counts of papers that directly reference
key popular ML methods.

3.4. Topic Modelling

The topic modelling performed on the corpus utilized the BERTopic algorithm [154].
This technique was chosen over others such as LDA [155] or NMF [156] because BERTopic
requires less effort in hyperparameter tuning and it trampolines off of the successful
transformer-based model, BERT [157]. It also empirically showed better results in topic
coherence and topic diversity on benchmark datasets [154].
As described in its original article, the BERTopic algorithm comprises the following
major steps:
1. Paper Embeddings with BERT. Converting the text of the input papers to a numeri-
cal representation is the first step. BERT is used for this because it extracts embeddings
according to the context of the words and the number of available pre-trained models
makes it easier to obtain more accurate extractions. The Sentence-BERT implemen-
Sensors 2022, 22, 8641 11 of 26

tation and pre-trained models are commonly used and were used in this case as
well [158].
2. Embedding Dimensionality Reduction with UMAP. Before clustering the embed-
dings to discover topics, dimensionality reduction is performed using UMAP because
many clustering algorithms perform poorly on high-dimension data. UMAP was
chosen because of its good performance in retaining information [159].
3. Paper Clustering with HDBSCAN. With the dimensionality reduced to a reasonable
amount, the embeddings are then clustered. HDBSCAN is chosen by the author
because it does not force data points into clusters. It instead considers them outliers
and it works well with UMAP since UMAP maintains structure well even in a low
dimensional space [160].
4. Topic Representation with c-TF-IDF. For deriving important representative words
for the clusters of documents, a class-based variant of TF-IDF [161] that generalizes the
method to a group of documents is used. Thus, resulting in a list of words representing
a topic for each cluster. This representation is also used to give greater control over
the number of clusters by merging similar and uncommon topics.

3.5. Topic Analysis

Upon the generation of the topic words by the prior step, we assessed the quality of
the result by observing approximate visualizations of the clusters and manually vetting
small random samples of each topic. If the quality of the result was deemed subpar, we
adjusted the HDBSCAN hyperparameters, such as min_cluster_size (the minimum size
of clusters) and min_samples (how conservative the clusters should be when determining
outliers), and repeated the process. The topic labels were manually determined based on the
produced topic words and the sample vetting. We then analyzed each topic to observe: the
percentage present in the corpus for each topic, the counts of papers referencing important
ML methods within each topic and the keywords by count for each topic.

3.6. Garnering an Industry Perspective

Our third research question sought to examine a comparison between the areas fo-
cused on in the academic literature versus those in the white papers of top industrial
companies. To that end, we manually gathered a small sample of such white papers
and extracted the key ML for industry 4.0 topics. The query, “[company] white papers
industry 4.0 machine learning ai”, was used on a popular search engine, Google, for a
brief list of top professional consulting companies. The blogs and websites of these com-
panies were also directly checked. The companies and their works included McKinsey
& Company [162–166], Accenture [167–169], Microsoft [170,171], Bain & Company [172],
Deloitte [173], PriceWaterhouseCoopers [174,175] and Boston Consulting Group [176–178].
The papers were manually vetted and selected for a similar degree of relevance and recency
to our academic corpus, resulting in a set of 17 white papers. These papers were not
included in the academic paper corpus or analyzed using the topic modelling procedure,
they were manually reviewed and their main ML for industry 4.0 topics were extracted.
The topics were extracted if the authors considered them to be of significant potential value
to industrial companies.

3.7. Meta-Analysis Results

A comparison of paper source types is presented in Table 1. Additionally, to gauge
the presence of common ML techniques, we counted the papers that mention key popular
ML methods in their title, abstract or keywords. This was conducted by writing lists
of identifying terms for each ML method considered. The counts of papers referencing
these ML methods are shown in Figure 4; however, “Neural Networks”, with a count of
36,229 papers, were excluded from that chart as it would overshadow the other results and
affect readability.
Sensors 2022, 22, 8641 12 of 26

Table 1. Paper sources for corpus.

Source Type Count % of Data

Article 27,767 60.65
Conference Paper 15,664 34.21
Review 1496 3.27
Book/Chapter 504 1.1
Other 352 0.77

Convolutional Neural Network

Support Vector Machine

Recurrent Neural Network

Method

Decision Trees
Autoencoder
Reinforcement Learning
Nearest Neighbours

GANs

0 2000 4000 6000 8000

Count
Figure 4. ML Methods by paper count for corpus.

4. Results
4.1. Topic Modelling Results
Figure 5 shows plots of the topic words and c-TF-IDF scores produced by the topic
modelling model after tuning the clustering hyperparameters. By further reducing the
dimensions of the embeddings to two during the UMAP step, we produced a visualization
of the topic clusters as shown in Figure 6. This visualization as well as the sample vetting
described in Section 3.4 allowed us to confirm that the topics cover the majority of the
papers aside from outliers and capture their main themes. Based on reviewing the full
lists of topic words and samples for each topic, the labels presented in Table 2 depict the
primary topics found and their percentage of presence in the dataset.

Table 2. Top 10 results of topic modelling.

Topic % of Data
0. Predictive Models and Digital Systems for Industrial Machines 25.44
1. Robotic Automation 16.33
2. Modelling for Agriculture and Water Treatment 10.45
3. Forecasting Load and Power Demands 3.25
4. Tool wear, Cutting Parameters & Surface Materials for Milling 3.01
5. Prediction and Modelling of Thermic Processes & Fluid Production 2.56
6. Prediction and Modelling for COVID-19 & Medical Devices 2.37
7. Sentiment Analysis and Recommender Systems 2.37
8. Optimization of Job Scheduling 1.91
9. Gait Recognition and Modelling using Sensors, Wearables and Images 1.30
Sensors 2022, 22, 8641 13 of 26

Figure 5. Plots of topic words by c-TF-IDF scores from topic modelling entire corpus.

Figure 6. Visualization of topic clusters by further reducing embedding dimensions.

Sensors 2022, 22, 8641 14 of 26

However, with the size of our corpus, the top 3 topics are wide-spanning branches
of the ML for industry 4.0 subfields. They also encompass several thousands of papers,
which helps emphasize the significance of those areas but impede our ability to examine
specific research directions. Hence we further analyzed the top three results by repeating
the topic modelling, tuning and labelling processes on them to produce their sub-topics,
while considering sub-topics, the top 20 topics are put forward in Table 3.
Table 3. Top 20 results of topic modelling inclusive of sub-topics.

Topic % of Data
0. Security and Intrusion Detection 4.38
1. Fault Diagnosis and Detection 3.88
2. Forecasting Load and Power Demands 3.25
3. Industrial IoT and Wireless Communication 3.05
4. Tool wear, Cutting Parameters and Surface Materials for Milling 3.01
5. Prediction and Modelling of Thermal Processes and Fluid Production 2.56
6. Prediction and Modelling for COVID-19 and Medical Devices 2.37
7. Sentiment Analysis and Recommender Systems 2.37
8. Reinforcement Learning for Robotics in Assembly and Planning 2.00
9. Optimization of Job Scheduling 1.91
10. Modelling Control of Robotic Manipulators 1.83
11. Modelling for Processing Wastewater and Water Treatment 1.80
12. Predictive Maintenance and RUL Forecasting 1.63
13. Adaptive Motor Control 1.60
14. Quality Inspection 1.37
15. Fuzzy Risk Analysis and Safety Management 1.36
16. Pose Estimation for Grasping Objects 1.33
17. Gait Recognition and Modelling using Sensors and Images 1.30
18. Engineering Education and Skill Development 1.16
19. Forecasting Crop Yields 1.03

Furthermore, the counts by paper for ML methods were repeated for each topic.
The resulting counts are reported in Figure 7.
Sensors 2022, 22, 8641 15 of 26

Figure 7. Count of papers by ML term mentions for each topic.

4.2. Industry Perspective Results

By manually reviewing the previously mentioned collection of white papers from
consulting companies, we curated lists of high potential value areas in ML for industry 4.0
for each paper. These areas or topics were categorized, grouped and visualized in the mind
map illustrated in Figure 8.
Sensors 2022, 22, 8641 16 of 26

Figure 8. Mind map of high potential value areas for ML in industry 4.0, by mentions in top consulting
companies’ white papers.

5. Discussion
5.1. Meta-Analysis
The meta-analysis results do not all directly contribute to answering our research
questions, but they provide useful context on the state of the area and our data. The pub-
lications over time show the increasing interest in the area of ML for industry 4.0, with a
strong spike in the last 6 years. By looking at the trend of publications with five or more
citations, we see that the spike’s significance is less than 30% of its counterpart. This can
be attributed to recency and the suddenness of the spike leading to many similar works
competing. However, the trend of the spike in interest is maintained and allows us to
estimate if the trend holds for impactful or popular papers.
The paper sources of our corpus are dominated by articles and conference papers,
an expected result. Unexpectedly, the percentage of articles outshines the conference
papers, a counter-intuitive result since Computer Science research findings tend to be
published in conference papers [179]. Examining the results further we saw that for Scopus,
the percentage of conference papers and articles were 67.9% and 25.5% respectively, while
for Web of Science it was 20.8% and 73.3%. A likely contributor to this is that Scopus has
better coverage of conference material, as previous work by Pranckutė has shown [180].
Hence, considering the Web of Science results outnumbered Scopus 33,632 to 12,151, it
skews the final counts. Additionally, ML for industry 4.0 is much more interdisciplinary
than the typical Computer Science sub-field so the tendency may not hold as well as usual.
Sensors 2022, 22, 8641 17 of 26

5.2. RQ 1: What Are the Industry 4.0 Problems Where ML Solutions See the Most Discussion?
Towards answering this question we used topic modelling to extract insights from a
large corpus and rationalized the choice of a deep learning-based approach in BERTopic.
The modelling produced the top topic words for each cluster of papers, and we used the
top 10 topic words in addition to manually vetted samples of clusters to assign final topic
labels. The word scores in Figure 5 represent a quick look at what BERTopic produced.
The topic words in that figure are the most common words in the topic defined by the
algorithm. By themselves they clearly hint to what the topic is about, but to give accurate
labels to each topic we also manually vetted random sample papers from each. The 2D
visualization of the labelled corpus shown in Figure 6 makes it clear that the topics covered
the corpus sufficiently with reasonable clusters. The clusters are cleanly separated and
illustrate the differences in topic presence at a glance.
From Table 2 we can see that the top three topics are wide branches of the overall area.
It is a useful observation to see their dominance at a general level but a closer inspection was
deemed appropriate to meet the specificity of the remaining topics for a fairer comparison.
The remaining 7 of that table were more specific cases of ML but the top 10 encapsulate the
variety of the problems discussed in ML for industry 4.0.
Topics 0 and 1, “Predictive Models and Digital Systems for Industrial Machines”
and “Robotic Automation”, are fairly general areas but show a significant focus on smart
production applications. Topic 2, “Modelling for Agriculture and Water Treatment”, was a
less expected observation. Smart agriculture is home to large branches of ML applications
such as the classification of plants and crop health or using soil characteristics to inform
decisions and actions. Hence it is understandable as a key topic. Water treatment on the
other hand is a more specific class of industrial applications. The grouping of the two
together is likely around the term “water” itself and can be construed as the model failing
to distinguish the difference based on the implied context. This is a known limitation of
BERTopic, where the topic representation stage is applied to bags-of-words and does not
explicitly leverage the embedded representations in this step. This issue in addition to how
wide of an area the top 3 topics cover, motivated further analysis on these three subsets by
repeating the topic modelling procedure.
That process resulted in Table 3 where we see a similar degree of specificity across
the topics. The general result of smart production being the most significant remained,
but now we gain greater insight into the observation. Security and intrusion detection was
the most prevalent area. taking into account the high potential costs and damage of cyber-
attacks, the risks taken on by increasingly digitized systems and the regulatory compliances
companies must meet, it is a logical finding that security is the most studied topic in the
area. Similarly, another of the top 20 is gait recognition, a biometric authenticator often used
as an added physical security measure [181]. Forecasting load and power demands, as well
as optimization of job scheduling, are ultimately concerned with the goal of dynamically
improving logistic processes in the supply chain. Sentiment analysis and recommender
systems are a part of optimizing and personalizing customer service and are the only topic
in the table concerned with this business function. The general theme of the remaining top
20 topics is of automating smart production tasks. Noteworthy inclusions among them,
are “Fault diagnosis and detection” and “Predictive maintenance and RUL forecasting”.
These are both focused on automating tasks that reduce the downtime of machines and are
frequently a dominant topic in manual reviews.

5.3. RQ 2: Which ML Methods Are Used the Most in These Areas?

In a step toward answering the question “Which ML methods are the most common
in the area?”, we counted the papers mentioning certain popular methods in their title,
abstract and keywords. Across the entire corpus, Convolutional Neural Networks (CNNs)
were the most common, with almost double the count of the second most common method.
CNNs stand among the most popular deep learning methods given the recent string of
successes in the computer vision domain. If we are to discuss how appropriate the choice
Sensors 2022, 22, 8641 18 of 26

of this model type is we must also consider the type of data most common in industrial
settings for the problems many seek to solve. We cannot deduce this across the entire
corpus easily, so we also look at the same count applied to each topic cluster of papers.
From Figure 7 we can see the method counts per topic. Convolutional neural networks
(CNNs) are dominant in the top three topics but not by the magnitude the previous count
figure alluded to. The clearest gap in usage is for the robotic automation topic. This is likely
due to a combination of how much image data is present in that space and the popularity
of computer vision applications in general.
Reinforcement learning (RL) is the second most popular for topic 1, “Robotic Automa-
tion”, which is interesting because the practical applications of this area are not as solidified
as some of those in supervised learning. That result adds to the argument that robotic
automation in industry 4.0 is a prime area for impactful real-world use of RL. This topic
also has a higher than usual count for generative adversarial networks (GANs), which
suggests that the space is often looked upon for the newer but exciting machine learning
techniques. RL also has the highest count for the “optimization of job scheduling” topic
but more traditional optimization techniques not covered in the scope of this review are
more likely to be the standard solutions to this problem.
Recurrent neural networks (RNNs) see higher counts in topics where sequential
or time-series data are more prominent, such as topic 3, “Forecasting load and power
demands”, and topic 7, “Sentiment analysis and recommender systems”. However, it can
be argued that for topic 0, “Predictive Models and Digital Systems for Industrial Machines”,
one might expect to see RNNs over CNNs due to the heavy presence of multivariate time-
series data in industrial machine sensors. The fact that autoencoders see a much higher
count there than anywhere else attests to this. Thus, CNNs may be seeing more common
use due to their popularity.
Meanwhile, the more traditional methods, support vector machines (SVMs) and
decision trees see consistent mentions across all topics, likely due to their simplicity, lower
computational demands and well-established reputations in the space of machine learning.

5.4. RQ 3: How Do the Areas Focused on in the Academic Literature Compare to the Areas of Focus
in the White Papers of Top Industrial Companies?
Answering this question required a look at ML for industry 4.0 from the high-level
perspective of top companies. To that end, we reviewed the recent and relevant white
papers of top consulting companies to provide a foundation for comparing the academic
literature’s focuses. We chose top consulting companies as they are often the ones providing
guidance and insight to industry actors directly. These consulting companies can be
considered leading experts in their practical domains, they also have an incentive to share
their insights and trends publicly. The mind map shown in Figure 8 was the result.
If we categorize the topic modelling results presented similarly, each of the major
categories in the mind map, such as smart production or connectivity, would be represented,
while not every minor category, such as marketing or Virtual and Augmented Reality
(VR/AR), is present in the topics extracted, this is understandable considering we look only
at the top 20 specific topics. Moreover, some areas are inherently less “publishable” than
others. For example, if a team were to discover a competitive edge in Product Development,
publishing those findings could reduce that edge or eliminate it. Similarly, some areas
provide more opportunities to publish by having a plethora of valuable use cases where
ML models can be applied. Robotic automation and predictive maintenance are examples
of such areas.
A limitation of the mind map is that it does not consider comparisons between the
topics it covers when in reality not all of the high-potential areas shown are equal in impact
and development complexity. So to gauge these aspects for our comparison, we also look
at the specific results of the McKinsey & Company global survey on the state of AI in
2021 [166]. They surveyed 1843 participants, representing a full range of regions, industries,
company sizes, functional specialities, and tenures, on their adoption and usage of AI.
Sensors 2022, 22, 8641 19 of 26

The survey shows that manufacturing use cases had the highest impact on decreasing
costs. Hence, it makes sense that the academic literature would show a significant focus on
smart production areas as well. Likewise, “Sentiment analysis and recommender systems”
may seem like an inconsistent result among the other topics, but Customer Care and
Personalization falls under Service Operations which, according to their survey, is the most
commonly adopted AI use case category.
From this, we can posit that the academic literature generally aligns with the major
focuses of industry experts. However, despite the aforementioned caveats, we believe that
some areas still deserve more attention. Companies are focused not only on individual
problems or use cases but also on the bigger picture of how they connect to the rest of their
pipelines and how they integrate with existing systems. Therefore, we believe it would
be worthwhile for future works to reflect this. Topics that lean towards this goal include
democratized technology, Human–Machine-Interaction through digital twins and VR/AR,
risk control concerning AI and ML in marketing.

6. Limitations and Promising Directions

One of the major limitations standing in the way of practical ML advancements that
can help close the gaps between industry and academia is the availability of relevant
data. Useful datasets certainly exist but given the variety of sources that occur from
industry to industry, it is difficult to find truly comprehensive public datasets. The use
of GANs to generate training samples for problems with limited data is therefore an
interesting and useful direction of work, especially considering the large amounts of data
DL methods require.
Another key issue is the complexity of deploying and integrating new ML systems.
Large companies are likely to have capable teams and additional infrastructure in place to
properly facilitate ML, but the vast majority of small to medium enterprises (SMEs) that
do not have this would need to make an upfront investment for engineers or consultancy
to explore the benefits of ML to their specific cases. Democratized technology and smart
integration through IoT show great promise for simplifying the path to ML adoption. They
enable general but useful ML solutions to be tried and built upon instead of upfront cost,
thus smoothening the rate of investment required by SMEs.
Computer vision solutions have seen a lot of success and popularity in industry 4.0 and
the attention it receives is well deserved. However, models that revolve around common
existing sensors for machines (temperature, pressure, vibration etc.) and software (ERP,
CRM, MES, etc.) would likely be cheaper in terms of computation and hardware. Therefore,
time-series ML models relevant to these rich data sources are also a promising direction for
advancing ML in industry 4.0.

7. Conclusions
Machine learning has a lot of potential value in industry 4.0 due to its scalable au-
tomation. This notion is supported by the spike in relevant publications over the last six
years. With that much research activity, comprehensive reviews are needed to provide
a foundation for guiding new studies and industry action plans, while there are several
high-quality reviews in the field, not many attempt to review the area on a large scale and
none utilize Topic Modelling to maximize the literature coverage. We aimed to do such a
review by gathering papers from the Scopus and Web of Science databases, building a topic
model using BERTopic, analysing the results and comparing it to a manually reviewed
industry perspective.
We targeted our research towards three research questions, “What are the Industry 4.0
problems where ML solutions see the most discussion?”, “Which ML methods are used the
most in these areas?” and “How do the areas focused on in the academic literature compare
to the areas of focus in the white papers of top industrial companies?”. From reviewing
the top 10 topics, we found that the most frequent problems fell under Security, Smart
Production, IoT Connectivity, Service Optimization, Robotic Automation and Logistics
Sensors 2022, 22, 8641 20 of 26

Optimization. By counting the mentions of ML methods for each topic, we saw that CNNs
were the most dominant despite the high presence of time-series data in industrial settings.
We manually reviewed 17 company white papers to garner an industry perspective and
compared them to our topics extracted from academic literature. In comparing the two,
we observed that the coverage of areas generally aligned well, and the higher presence of
smart production topics was justified given its real-world impact and the fact that some
areas are more easily publishable than others.
However, we also recognized that companies are focused on higher-level goals rather
than just individual ML use cases or improvements. Hence, we remarked that the topics
supporting ML adoption and integration deserve attention and increased focus in future
works. Examples of these areas include democratized technology, digital twins, human-AI-
interaction and AI risk control.

Author Contributions: Conceptualization, D.M. and R.R.; methodology, D.M. and R.R.; software,
R.R.; validation, D.M. and R.R.; formal analysis, R.R.; investigation, R.R.; resources, R.R.; data
curation, R.R.; writing—original draft preparation, R.R.; writing—review and editing, D.M. and R.R.;
visualization, R.R.; supervision, D.M.; project administration, D.M. All authors have read and agreed
to the published version of the manuscript.
Funding: This work has been partially funded by Programme Erasmus+, Knowledge Alliances,
Application No 621639-EPP-1-2020-1-IT-EPPKA2-KA, PLANET4: Practical Learning of Artificial
iNtelligence on the Edge for indusTry 4.0. This research is supported by the Ministry of Univer-
sity and Research (MUR) as part of the PON 2014-2020 “Research and Innovation” resources—
Green/Innovation Action—DM MUR 1061/2022.
Institutional Review Board Statement: Not applicable.
Informed Consent Statement: Not applicable.
Data Availability Statement: The dataset generated during the current study is not publicly available
as it contains proprietary information that the authors acquired through a license. Information on how
to obtain it and reproduce the analysis is available in the presented work or from the corresponding
author on request.
Conflicts of Interest: The authors declare no conflict of interest.

References
1. Lasi, H.; Fettke, P.; Kemper, H.G.; Feld, T.; Hoffmann, M. Industry 4.0. Bus. Inf. Syst. Eng. 2014, 6, 239–242. [CrossRef]
2. Lu, Y. Industry 4.0: A survey on technologies, applications and open research issues. J. Ind. Inf. Integr. 2017, 6, 1–10. [CrossRef]
3. Oztemel, E.; Gursev, S. Literature review of Industry 4.0 and related technologies. J. Intell. Manuf. 2020, 31, 127–182. [CrossRef]
4. Wollschlaeger, M.; Sauter, T.; Jasperneite, J. The future of industrial communication: Automation networks in the era of the
internet of things and industry 4.0. IEEE Ind. Electron. Mag. 2017, 11, 17–27. [CrossRef]
5. Khalil, R.A.; Saeed, N.; Masood, M.; Fard, Y.M.; Alouini, M.S.; Al-Naffouri, T.Y. Deep learning in the industrial internet of things:
Potentials, challenges, and emerging applications. IEEE Internet Things J. 2021, 8, 11016–11040. [CrossRef]
6. Bertolini, M.; Mezzogori, D.; Neroni, M.; Zammori, F. Machine Learning for industrial applications: A comprehensive literature
review. Expert Syst. Appl. 2021, 175, 114820. [CrossRef]
7. Gupta, C.; Farahat, A. Deep Learning for Industrial AI: Challenges, New Methods and Best Practices. In Proceedings of the 26th
ACM SIGKDD International Conference on Knowledge Discovery & Data Mining, Virtual Event, 6–10 July 2020; pp. 3571–3572.
8. Shahid, A.; Afzal, M.T.; Abdar, M.; Basiri, M.E.; Zhou, X.; Yen, N.Y.; Chang, J.W. Insights into relevant knowledge extraction
techniques: A comprehensive review. J. Supercomput. 2020, 76, 1695–1733. [CrossRef]
9. Wang, Y.; Zhang, C.; Li, K. A review on method entities in the academic literature: Extraction, evaluation, and application.
Scientometrics 2022, 127, 2479–2520. [CrossRef]
10. Firoozeh, N.; Nazarenko, A.; Alizon, F.; Daille, B. Keyword extraction: Issues and methods. Nat. Lang. Eng. 2020, 26, 259–291.
[CrossRef]
11. Asmussen, C.B.; Møller, C. Smart literature review: A practical topic modelling approach to exploratory literature review.
J. Big Data 2019, 6, 93. [CrossRef]
12. Jacobi, C.; Van Atteveldt, W.; Welbers, K. Quantitative analysis of large amounts of journalistic texts using topic modelling.
Digit. J. 2016, 4, 89–106. [CrossRef]
13. Krose, B.; Smagt, P.V.D. An Introduction to Neural Networks; MIT Press: Cambridge, MA, USA, 2011.
14. Bishop, C.M. Neural networks and their applications. Rev. Sci. Instrum. 1994, 65, 1803–1832. [CrossRef]
Sensors 2022, 22, 8641 21 of 26

15. Anderson, J.A. An Introduction to Neural Networks; MIT Press: Cambridge, MA, USA, 1995.
16. Jantzen, J. Introduction to Perceptron Networks; DTU Library: New Delhi, India, 1998.
17. Canziani, A.; Paszke, A.; Culurciello, E. An analysis of deep neural network models for practical applications. arXiv 2016,
arXiv:1605.07678.
18. O’Shea, K.; Nash, R. An introduction to convolutional neural networks. arXiv 2015, arXiv:1511.08458.
19. Albawi, S.; Mohammed, T.A.; Al-Zawi, S. Understanding of a convolutional neural network. In Proceedings of the 2017
International Conference on Engineering and Technology (ICET), Antalya, Turkey, 21–23 August 2017; pp. 1–6.
20. Gu, J.; Wang, Z.; Kuen, J.; Ma, L.; Shahroudy, A.; Shuai, B.; Liu, T.; Wang, X.; Wang, G.; Cai, J.; et al. Recent advances in
convolutional neural networks. Pattern Recognit. 2018, 77, 354–377. [CrossRef]
21. Medsker, L.R.; Jain, L. Recurrent neural networks. Des. Appl. 2001, 5, 64–67.
22. Medsker, L.; Jain, L.C. Recurrent Neural NETWORKS: Design and Applications; CRC Press: Boca Raton, FL, USA, 1999.
23. Hochreiter, S.; Schmidhuber, J. Long short-term memory. Neural Comput. 1997, 9, 1735–1780. [CrossRef]
24. Van Houdt, G.; Mosquera, C.; Nápoles, G. A review on the long short-term memory model. Artif. Intell. Rev. 2020, 53, 5929–5955.
[CrossRef]
25. Chung, J.; Gulcehre, C.; Cho, K.; Bengio, Y. Empirical evaluation of gated recurrent neural networks on sequence modeling. arXiv
2014, arXiv:1412.3555.
26. Dey, R.; Salem, F.M. Gate-variants of gated recurrent unit (GRU) neural networks. In Proceedings of the 2017 IEEE 60th
International Midwest Symposium on Circuits and Systems (MWSCAS), Boston, MA, USA, 6–9 August 2017; pp. 1597–1600.
27. Noble, W.S. What is a support vector machine? Nat. Biotechnol. 2006, 24, 1565–1567. [CrossRef]
28. Hearst, M.A.; Dumais, S.T.; Osuna, E.; Platt, J.; Scholkopf, B. Support vector machines. IEEE Intell. Syst. Their Appl. 1998,
13, 18–28. [CrossRef]
29. Steinwart, I.; Christmann, A. Support Vector Machines; Springer Science & Business Media: Berlin/Heidelberg, Germany, 2008.
30. Myles, A.J.; Feudale, R.N.; Liu, Y.; Woody, N.A.; Brown, S.D. An introduction to decision tree modeling. J. Chemom. J. Chemom. Soc.
2004, 18, 275–285. [CrossRef]
31. Song, Y.Y.; Ying, L. Decision tree methods: Applications for classification and prediction. Shanghai Arch. Psychiatry 2015, 27, 130.
32. Biau, G.; Scornet, E. A random forest guided tour. Test 2016, 25, 197–227. [CrossRef]
33. Breiman, L. Random forests. Mach. Learn. 2001, 45, 5–32. [CrossRef]
34. Breiman, L. Bagging predictors. Mach. Learn. 1996, 24, 123–140. [CrossRef]
35. Freund, Y.; Schapire, R.E. Experiments with a new boosting algorithm. In Proceedings of the ICML, Thirteenth International
Conference on International Conference on Machine Learning, Bari, Italy, 3–6 July 1996; Volume 96, pp. 148–156.
36. Friedman, J.H. Greedy function approximation: A gradient boosting machine. Ann. Stat. 2001, 29, 1189–1232. [CrossRef]
37. Freund, Y.; Schapire, R.E. A decision-theoretic generalization of on-line learning and an application to boosting.
J. Comput. Syst. Sci. 1997, 55, 119–139. [CrossRef]
38. Chen, T.; Guestrin, C. Xgboost: A scalable tree boosting system. In Proceedings of the 22nd ACM SIGKDD International
Conference on Knowledge Discovery and Data Mining, San Francisco, CA, USA, 13–17 August 2016; pp. 785–794.
39. Liou, C.Y.; Cheng, W.C.; Liou, J.W.; Liou, D.R. Autoencoder for words. Neurocomputing 2014, 139, 84–96. [CrossRef]
40. Badrinarayanan, V.; Kendall, A.; Cipolla, R. Segnet: A deep convolutional encoder-decoder architecture for image segmentation.
IEEE Trans. Pattern Anal. Mach. Intell. 2017, 39, 2481–2495. [CrossRef]
41. Zhou, C.; Paffenroth, R.C. Anomaly detection with robust deep autoencoders. In Proceedings of the 23rd ACM SIGKDD
International Conference on Knowledge Discovery and Data Mining, Halifax, NS, Canada, 13–17 August 2017; pp. 665–674.
42. Wold, S.; Esbensen, K.; Geladi, P. Principal component analysis. Chemom. Intell. Lab. Syst. 1987, 2, 37–52. [CrossRef]
43. Yousefi-Azar, M.; Varadharajan, V.; Hamey, L.; Tupakula, U. Autoencoder-based feature learning for cyber security applications.
In Proceedings of the 2017 International Joint Conference on Neural Networks (IJCNN), Anchorage, AK, USA, 14–19 May 2017;
pp. 3854–3861.
44. Gao, S.; Zhang, Y.; Jia, K.; Lu, J.; Zhang, Y. Single sample face recognition via learning deep supervised autoencoders.
IEEE Trans. Inf. Forensics Secur. 2015, 10, 2108–2118. [CrossRef]
45. Bank, D.; Koenigstein, N.; Giryes, R. Autoencoders. arXiv 2020, arXiv:2003.05991.
46. Sutton, R.S.; Barto, A.G. Reinforcement Learning: An Introduction; MIT Press: Cambridge, MA, USA, 2018.
47. Kaelbling, L.P.; Littman, M.L.; Moore, A.W. Reinforcement learning: A survey. J. Artif. Intell. Res. 1996, 4, 237–285. [CrossRef]
48. Li, Y. Deep reinforcement learning: An overview. arXiv 2017, arXiv:1701.07274.
49. Luong, N.C.; Hoang, D.T.; Gong, S.; Niyato, D.; Wang, P.; Liang, Y.C.; Kim, D.I. Applications of deep reinforcement learning in
communications and networking: A survey. IEEE Commun. Surv. Tutor. 2019, 21, 3133–3174. [CrossRef]
50. Polydoros, A.S.; Nalpantidis, L. Survey of model-based reinforcement learning: Applications on robotics. J. Intell. Robot. Syst.
2017, 86, 153–173. [CrossRef]
51. Li, Y. Reinforcement learning applications. arXiv 2019, arXiv:1908.06973.
52. Cover, T.; Hart, P. Nearest neighbor pattern classification. IEEE Trans. Inf. Theory 1967, 13, 21–27. [CrossRef]
53. Bhatia, N.; Vandana. Survey of nearest neighbor techniques. arXiv 2010, arXiv:1007.0085.
54. Peterson, L.E. K-nearest neighbor. Scholarpedia 2009, 4, 1883. [CrossRef]
55. Bentley, J.L. Multidimensional binary search trees used for associative searching. Commun. ACM 1975, 18, 509–517. [CrossRef]
Sensors 2022, 22, 8641 22 of 26

56. Omohundro, S.M. Five Balltree Construction Algorithms; International Computer Science Institute Berkeley: Berkeley, CA, USA, 1989.
57. Goodfellow, I.; Pouget-Abadie, J.; Mirza, M.; Xu, B.; Warde-Farley, D.; Ozair, S.; Courville, A.; Bengio, Y. Generative adversarial
networks. Commun. ACM 2020, 63, 139–144. [CrossRef]
58. Gui, J.; Sun, Z.; Wen, Y.; Tao, D.; Ye, J. A review on generative adversarial networks: Algorithms, theory, and applications.
IEEE Trans. Knowl. Data Eng. 2021. [CrossRef]
59. Aggarwal, A.; Mittal, M.; Battineni, G. Generative adversarial network: An overview of theory and applications.
Int. J. Inf. Manag. Data Insights 2021, 1, 100004. [CrossRef]
60. Abid, A.; Khan, M.T.; Iqbal, J. A review on fault detection and diagnosis techniques: Basics and beyond. Artif. Intell. Rev. 2021,
54, 3639–3664. [CrossRef]
61. Iqbal, R.; Maniak, T.; Doctor, F.; Karyotis, C. Fault detection and isolation in industrial processes using deep learning approaches.
IEEE Trans. Ind. Inform. 2019, 15, 3077–3084. [CrossRef]
62. Schwendemann, S.; Amjad, Z.; Sikora, A. A survey of machine-learning techniques for condition monitoring and predictive
maintenance of bearings in grinding machines. Comput. Ind. 2021, 125, 103380. [CrossRef]
63. Li, L.; Ota, K.; Dong, M. Deep learning for smart industry: Efficient manufacture inspection system with fog computing.
IEEE Trans. Ind. Inform. 2018, 14, 4665–4673. [CrossRef]
64. Weimer, D.; Scholz-Reiter, B.; Shpitalni, M. Design of deep convolutional neural network architectures for automated feature
extraction in industrial inspection. CIRP Ann. 2016, 65, 417–420. [CrossRef]
65. Tabernik, D.; Šela, S.; Skvarč, J.; Skočaj, D. Segmentation-based deep-learning approach for surface-defect detection.
J. Intell. Manuf. 2020, 31, 759–776. [CrossRef]
66. Khorasgani, H.; Hasanzadeh, A.; Farahat, A.; Gupta, C. Fault detection and isolation in industrial networks using graph
convolutional neural networks. In Proceedings of the 2019 IEEE International Conference on Prognostics and Health Management
(ICPHM), San Francisco, CA, USA, 17–20 June 2019; pp. 1–7.
67. Das, S.; Hollander, C.D.; Suliman, S. Automating Visual Inspection with Convolutional Neural Networks. In Proceedings of the
Annual Conference of the PHM Society, Scottsdale, AZ, USA, 23–26 September 2019; Volume 11.
68. Souza, R.M.; Nascimento, E.G.; Miranda, U.A.; Silva, W.J.; Lepikson, H.A. Deep learning for diagnosis and classification of faults
in industrial rotating machinery. Comput. Ind. Eng. 2021, 153, 107060. [CrossRef]
69. Glaeser, A.; Selvaraj, V.; Lee, S.; Hwang, Y.; Lee, K.; Lee, N.; Lee, S.; Min, S. Applications of deep learning for fault detection in
industrial cold forging. Int. J. Prod. Res. 2021, 59, 4826–4835. [CrossRef]
70. Park, D.; Kim, S.; An, Y.; Jung, J.Y. LiReD: A light-weight real-time fault detection system for edge computing using LSTM
recurrent neural networks. Sensors 2018, 18, 2110. [CrossRef] [PubMed]
71. Huang, Y.; Chen, C.H.; Huang, C.J. Motor fault detection and feature extraction using RNN-based variational autoencoder.
IEEE Access 2019, 7, 139086–139096. [CrossRef]
72. Alrifaey, M.; Lim, W.H.; Ang, C.K. A novel deep learning framework based RNN-SAE for fault detection of electrical gas
generator. IEEE Access 2021, 9, 21433–21442. [CrossRef]
73. Wang, F.; Fan, X.; Wang, F.; Liu, J. Backup battery analysis and allocation against power outage for cellular base stations.
IEEE Trans. Mob. Comput. 2018, 18, 520–533. [CrossRef]
74. Ren, L.; Sun, Y.; Cui, J.; Zhang, L. Bearing remaining useful life prediction based on deep autoencoder and deep neural networks.
J. Manuf. Syst. 2018, 48, 71–77. [CrossRef]
75. Huang, W.; Khorasgani, H.; Gupta, C.; Farahat, A.; Zheng, S. Remaining useful life estimation for systems with abrupt failures. In
Proceedings of the Annual Conference of the PHM Society, September, Philadelphia, PA, USA, 24–27 September 2018; pp. 24–27.
76. Malhotra, P.; Tv, V.; Ramakrishnan, A.; Anand, G.; Vig, L.; Agarwal, P.; Shroff, G. Multi-sensor prognostics using an unsupervised
health index based on LSTM encoder-decoder. arXiv 2016, arXiv:1608.06154.
77. Wu, Y.; Yuan, M.; Dong, S.; Lin, L.; Liu, Y. Remaining useful life estimation of engineered systems using vanilla LSTM neural
networks. Neurocomputing 2018, 275, 167–179. [CrossRef]
78. Yan, H.; Wan, J.; Zhang, C.; Tang, S.; Hua, Q.; Wang, Z. Industrial big data analytics for prediction of remaining useful life based
on deep learning. IEEE Access 2018, 6, 17190–17197. [CrossRef]
79. Spiegel, S.; Mueller, F.; Weismann, D.; Bird, J. Cost-sensitive learning for predictive maintenance. arXiv 2018, arXiv:1809.10979.
80. Zhang, C.; Gupta, C.; Farahat, A.; Ristovski, K.; Ghosh, D. Equipment health indicator learning using deep reinforcement learning.
In Proceedings of the Joint European Conference on Machine Learning and Knowledge Discovery in Databases, Dublin, Ireland,
10–14 September 2018; pp. 488–504.
81. Zheng, S.; Farahat, A.; Gupta, C. Generative adversarial networks for failure prediction. In Proceedings of the Joint Euro-
pean Conference on Machine Learning and Knowledge Discovery in Databases, Wurzburg, Germany, 16–20 September 2019;
pp. 621–637.
82. Arents, J.; Greitans, M. Smart industrial robot control trends, challenges and opportunities within manufacturing. Appl. Sci. 2022,
12, 937. [CrossRef]
83. Saravanan, M.; Kumar, P.S.; Sharma, A. IoT enabled indoor autonomous mobile robot using CNN and Q-learning. In Proceedings
of the 2019 IEEE International Conference on Industry 4.0, Artificial Intelligence, and Communications Technology (IAICT), Bali,
Indonesia, 1–3 July 2019; pp. 7–13.
Sensors 2022, 22, 8641 23 of 26

84. Pane, Y.P.; Nageshrao, S.P.; Kober, J.; Babuška, R. Reinforcement learning based compensation methods for robot manipulators.
Eng. Appl. Artif. Intell. 2019, 78, 236–247. [CrossRef]
85. Lobbezoo, A.; Qian, Y.; Kwon, H.J. Reinforcement Learning for Pick and Place Operations in Robotics: A Survey. Robotics 2021,
10, 105. [CrossRef]
86. Maqsood, M.; Mehmood, I.; Kharel, R.; Muhammad, K.; Lee, J.; Alnumay, W. Exploring the role of deep learning in industrial
applications: A case study on coastal crane casting recognition. Hum. Cent. Comput. Inf. Sci. 2021, 11, 1–14.
87. Maddikunta, P.K.R.; Hakak, S.; Alazab, M.; Bhattacharya, S.; Gadekallu, T.R.; Khan, W.Z.; Pham, Q.V. Unmanned aerial vehicles
in smart agriculture: Applications, requirements, and challenges. IEEE Sens. J. 2021, 21, 17608–17619. [CrossRef]
88. Kim, J.; Kim, S.; Ju, C.; Son, H.I. Unmanned aerial vehicles in agriculture: A review of perspective of platform, control, and
applications. IEEE Access 2019, 7, 105100–105115. [CrossRef]
89. Shalaby, W.; Arantes, A.; GonzalezDiaz, T.; Gupta, C. Building chatbots from large scale domain-specific knowledge bases:
Challenges and opportunities. In Proceedings of the 2020 IEEE International Conference on Prognostics and Health Management
(ICPHM), Detroit, MI, USA, 8–10 June 2020; pp. 1–8.
90. Miklosik, A.; Evans, N. Impact of big data and machine learning on digital transformation in marketing: A literature review.
IEEE Access 2020, 8, 101284–101292. [CrossRef]
91. Feinberg, E.A.; Genethliou, D. Load forecasting. In Applied Mathematics for Restructured Electric Power Systems; Springer:
Berlin/Heidelberg, Germany, 2005; pp. 269–285.
92. Almalaq, A.; Edwards, G. A review of deep learning methods applied on load forecasting. In Proceedings of the 2017 16th IEEE
International Conference on Machine Learning and Applications (ICMLA), Cancun, Mexico, 18–21 December 2017; pp. 511–516.
93. Yildiz, B.; Bilbao, J.I.; Sproul, A.B. A review and analysis of regression and machine learning models on commercial building
electricity load forecasting. Renew. Sustain. Energy Rev. 2017, 73, 1104–1122. [CrossRef]
94. Shi, H.; Xu, M.; Li, R. Deep learning for household load forecasting—A novel pooling deep RNN. IEEE Trans. Smart Grid 2017,
9, 5271–5280. [CrossRef]
95. Thokala, N.K.; Bapna, A.; Chandra, M.G. A deployable electrical load forecasting solution for commercial buildings. In
Proceedings of the 2018 IEEE International Conference on Industrial Technology (ICIT), Lyon, France, 20–22 February 2018;
pp. 1101–1106.
96. Chou, J.S.; Tran, D.S. Forecasting energy consumption time series using machine learning techniques based on usage patterns of
residential householders. Energy 2018, 165, 709–726. [CrossRef]
97. García-Martín, E.; Rodrigues, C.F.; Riley, G.; Grahn, H. Estimation of energy consumption in machine learning. J. Parallel Distrib.
Comput. 2019, 134, 75–88. [CrossRef]
98. Pallonetto, F.; De Rosa, M.; Milano, F.; Finn, D.P. Demand response algorithms for smart-grid ready residential buildings using
machine learning models. Appl. Energy 2019, 239, 1265–1282. [CrossRef]
99. Jagtap, S.; Rahimifard, S.; Duong, L.N. Real-time data collection to improve energy efficiency: A case study of food manufacturer.
J. Food Process. Preserv. 2022, 46, e14338. [CrossRef]
100. Alli, A.A.; Alam, M.M. SecOFF-FCIoT: Machine learning based secure offloading in Fog-Cloud of things for smart city applications.
Internet Things 2019, 7, 100070. [CrossRef]
101. Liu, C.H.; Ma, X.; Gao, X.; Tang, J. Distributed energy-efficient multi-UAV navigation for long-term communication coverage by
deep reinforcement learning. IEEE Trans. Mob. Comput. 2019, 19, 1274–1285. [CrossRef]
102. Zhu, M.; Liu, X.Y.; Wang, X. Deep reinforcement learning for unmanned aerial vehicle-assisted vehicular networks. arXiv 2019,
arXiv:1906.05015.
103. Chu, K.C.; Horng, D.J.; Chang, K.C. Numerical optimization of the energy consumption for wireless sensor networks based on
an improved ant colony algorithm. IEEE Access 2019, 7, 105562–105571. [CrossRef]
104. Yadav, G.; Paul, K. Architecture and security of SCADA systems: A review. Int. J. Crit. Infrastruct. Prot. 2021, 34, 100433.
[CrossRef]
105. Langner, R. Stuxnet: Dissecting a cyberwarfare weapon. IEEE Secur. Priv. 2011, 9, 49–51. [CrossRef]
106. Kalyani, S.; Swarup, K.S. Particle swarm optimization based K-means clustering approach for security assessment in power
systems. Expert Syst. Appl. 2011, 38, 10839–10846. [CrossRef]
107. Jabbar, M.; Samreen, S. Intelligent network intrusion detection using alternating decision trees. In Proceedings of the 2016
International Conference on Circuits, Controls, Communications and Computing (I4C), Bangalore, India, 4–6 October 2016;
pp. 1–6.
108. Meena, G.; Choudhary, R.R. A review paper on IDS classification using KDD 99 and NSL KDD dataset in WEKA. In Proceedings
of the 2017 International Conference on Computer, Communications and Electronics (Comptelix), Jaipur, India, 1–2 July 2017;
pp. 553–558.
109. Muna, A.H.; Moustafa, N.; Sitnikova, E. Identification of malicious activities in industrial internet of things based on deep
learning models. J. Inf. Secur. Appl. 2018, 41, 1–11.
110. Wang, C.; Wang, B.; Liu, H.; Qu, H. Anomaly detection for industrial control system based on autoencoder neural network.
Wirel. Commun. Mob. Comput. 2020, 2020, 8897926. [CrossRef]
111. Wong, T.; Luo, Z. Recurrent auto-encoder model for large-scale industrial sensor signal analysis. In Proceedings of the
International Conference on Engineering Applications of Neural Networks, Bristol, UK, 3–5 September 2018; pp. 203–216.
Sensors 2022, 22, 8641 24 of 26

112. Dixit, P.; Silakari, S. Deep learning algorithms for cybersecurity applications: A technological and status review. Comput. Sci. Rev.
2021, 39, 100317. [CrossRef]
113. Yan, J.; He, H.; Zhong, X.; Tang, Y. Q-learning-based vulnerability analysis of smart grid against sequential topology attacks.
IEEE Trans. Inf. Forensics Secur. 2016, 12, 200–210. [CrossRef]
114. Nguyen, T.T.; Reddi, V.J. Deep reinforcement learning for cyber security. IEEE Trans. Neural Netw. Learn. Syst. 2019. [CrossRef]
115. Uprety, A.; Rawat, D.B. Reinforcement learning for iot security: A comprehensive survey. IEEE Internet Things J. 2020, 8, 8693–8706.
[CrossRef]
116. Mautz, R. Indoor Positioning Technologies; ETH Zurich: Zurich, Switzerland, 2012.
117. Basri, C.; El Khadimi, A. Survey on indoor localization system and recent advances of WIFI fingerprinting technique. In
Proceedings of the 2016 5th International Conference on Multimedia Computing and Systems (ICMCS), Marrakech, Morocco, 29
September–1 October 2016; pp. 253–259.
118. Zheng, L.; Hu, B.J.; Qiu, J.; Cui, M. A deep-learning-based self-calibration time-reversal fingerprinting localization approach on
Wi-Fi platform. IEEE Internet Things J. 2020, 7, 7072–7083. [CrossRef]
119. Zhao, L.; Huang, H.; Li, X.; Ding, S.; Zhao, H.; Han, Z. An accurate and robust approach of device-free localization with
convolutional autoencoder. IEEE Internet Things J. 2019, 6, 5825–5840. [CrossRef]
120. Li, Z.; Xu, K.; Wang, H.; Zhao, Y.; Wang, X.; Shen, M. Machine-learning-based positioning: A survey and future directions.
IEEE Netw. 2019, 33, 96–101. [CrossRef]
121. Zhu, X.; Rehman, K.U.; Wang, B.; Shahzad, M. Modern soft-sensing modeling methods for fermentation processes. Sensors 2020,
20, 1771. [CrossRef]
122. Kadlec, P.; Gabrys, B.; Strandt, S. Data-driven soft sensors in the process industry. Comput. Chem. Eng. 2009, 33, 795–814.
[CrossRef]
123. Shang, C.; You, F. Data analytics and machine learning for smart process manufacturing: Recent advances and perspectives in the
big data era. Engineering 2019, 5, 1010–1016. [CrossRef]
124. Xie, R.; Jan, N.M.; Hao, K.; Chen, L.; Huang, B. Supervised variational autoencoders for soft sensor modeling with missing data.
IEEE Trans. Ind. Inform. 2019, 16, 2820–2828. [CrossRef]
125. Christopher, M. Logistics & Supply Chain Management; Pearson: London, UK, 2016.
126. Akbari, M. Logistics outsourcing: A structured literature review. Benchmark. Int. J. 2018, 25, 1548–1580. [CrossRef]
127. Surajit, B.; Telukdarie, A. Business logistics optimization using industry 4.0: Current status and opportunities. In Proceedings of
the 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Bangkok, Thailand,
16–19 December 2018; pp. 1558–1562.
128. Zohal, M.; Soleimani, H. Developing an ant colony approach for green closed-loop supply chain network design: A case study in
gold industry. J. Clean. Prod. 2016, 133, 314–337. [CrossRef]
129. Zhang, L.Y.; Tseng, M.L.; Wang, C.H.; Xiao, C.; Fei, T. Low-carbon cold chain logistics using ribonucleic acid-ant colony
optimization algorithm. J. Clean. Prod. 2019, 233, 169–180. [CrossRef]
130. Maiyar, L.M.; Thakkar, J.J. Environmentally conscious logistics planning for food grain industry considering wastages employing
multi objective hybrid particle swarm optimization. Transp. Res. Part Logist. Transp. Rev. 2019, 127, 220–248. [CrossRef]
131. Li, Y.; Lim, M.K.; Tseng, M.L. A green vehicle routing model based on modified particle swarm optimization for cold chain
logistics. Ind. Manag. Data Syst. 2018, 119, 473–494. [CrossRef]
132. Zheng, S.; Gupta, C.; Serita, S. Manufacturing dispatching using reinforcement and transfer learning. In Proceedings of the Joint
European Conference on Machine Learning and Knowledge Discovery in Databases, Wurzburg, Germany, 16–20 September 2019;
pp. 655–671.
133. Wang, F.; Zhang, C.; Liu, J.; Zhu, Y.; Pang, H.; Sun, L. Intelligent edge-assisted crowdcast with deep reinforcement learning for
personalized QoE. In Proceedings of the IEEE INFOCOM 2019-IEEE Conference on Computer Communications, Paris, France, 29
April–2 May 2019; pp. 910–918.
134. Dalzochio, J.; Kunst, R.; Pignaton, E.; Binotto, A.; Sanyal, S.; Favilla, J.; Barbosa, J. Machine learning and reasoning for predictive
maintenance in Industry 4.0: Current status and challenges. Comput. Ind. 2020, 123, 103298. [CrossRef]
135. Diez-Olivan, A.; Del Ser, J.; Galar, D.; Sierra, B. Data fusion and machine learning for industrial prognosis: Trends and perspectives
towards Industry 4.0. Inf. Fusion 2019, 50, 92–111. [CrossRef]
136. Sun, Q.; Ge, Z. A survey on deep learning for data-driven soft sensors. IEEE Trans. Ind. Inform. 2021, 17, 5853–5866. [CrossRef]
137. Carvalho, T.P.; Soares, F.A.; Vita, R.; Francisco, R.d.P.; Basto, J.P.; Alcalá, S.G. A systematic literature review of machine learning
methods applied to predictive maintenance. Comput. Ind. Eng. 2019, 137, 106024. [CrossRef]
138. Kotsiopoulos, T.; Sarigiannidis, P.; Ioannidis, D.; Tzovaras, D. Machine learning and deep learning in smart manufacturing: The
smart grid paradigm. Comput. Sci. Rev. 2021, 40, 100341. [CrossRef]
139. Wuest, T.; Weimer, D.; Irgens, C.; Thoben, K.D. Machine learning in manufacturing: Advantages, challenges, and applications.
Prod. Manuf. Res. 2016, 4, 23–45. [CrossRef]
140. Dogan, A.; Birant, D. Machine learning and data mining in manufacturing. Expert Syst. Appl. 2021, 166, 114060. [CrossRef]
141. Sharma, A.; Zhang, Z.; Rai, R. The interpretive model of manufacturing: A theoretical framework and research agenda for
machine learning in manufacturing. Int. J. Prod. Res. 2021, 59, 4960–4994. [CrossRef]
Sensors 2022, 22, 8641 25 of 26

142. Rai, R.; Tiwari, M.K.; Ivanov, D.; Dolgui, A. Machine learning in manufacturing and industry 4.0 applications. Int. J. Prod. Res.
2021, 59, 4773–4778. [CrossRef]
143. Wang, Y.; Zhang, D.; Liu, Y.; Dai, B.; Lee, L.H. Enhancing transportation systems via deep learning: A survey. Transp. Res. Part C
Emerg. Technol. 2019, 99, 144–163. [CrossRef]
144. Nguyen, H.; Kieu, L.M.; Wen, T.; Cai, C. Deep learning methods in transportation domain: A review. IET Intell. Transp. Syst.
2018, 12, 998–1004. [CrossRef]
145. Narciso, D.A.; Martins, F. Application of machine learning tools for energy efficiency in industry: A review. Energy Rep. 2020,
6, 1181–1199. [CrossRef]
146. Mosavi, A.; Salimi, M.; Faizollahzadeh Ardabili, S.; Rabczuk, T.; Shamshirband, S.; Varkonyi-Koczy, A.R. State of the art of
machine learning models in energy systems, a systematic review. Energies 2019, 12, 1301. [CrossRef]
147. Duan, L.; Da Xu, L. Data analytics in industry 4.0: A survey. Inf. Syst. Front. 2021. 1–17. [CrossRef]
148. Liao, Y.; Deschamps, F.; Loures, E.d.F.R.; Ramos, L.F.P. Past, present and future of Industry 4.0—A systematic literature review
and research agenda proposal. Int. J. Prod. Res. 2017, 55, 3609–3629. [CrossRef]
149. Lee, C.; Lim, C. From technological development to social advance: A review of Industry 4.0 through machine learning.
Technol. Forecast. Soc. Chang. 2021, 167, 120653. [CrossRef]
150. Mazzei, D.; Chiarello, F.; Fantoni, G. Analyzing social robotics research with natural language processing techniques.
Cogn. Comput. 2021, 13, 308–321. [CrossRef]
151. Atzeni, D.; Bacciu, D.; Mazzei, D.; Prencipe, G. A Systematic Review of Wi-Fi and Machine Learning Integration with Topic
Modeling Techniques. Sensors 2022, 22, 4925. [CrossRef]
152. Zhu, J.; Liu, W. A tale of two databases: The use of Web of Science and Scopus in academic papers. Scientometrics 2020,
123, 321–335. [CrossRef]
153. Mongeon, P.; Paul-Hus, A. The journal coverage of Web of Science and Scopus: A comparative analysis. Scientometrics 2016,
106, 213–228. [CrossRef]
154. Grootendorst, M. BERTopic: Neural topic modeling with a class-based TF-IDF procedure. arXiv 2022, arXiv:2203.05794.
155. Blei, D.M.; Ng, A.Y.; Jordan, M.I. Latent dirichlet allocation. J. Mach. Learn. Res. 2003, 3, 993–1022.
156. Xu, W.; Liu, X.; Gong, Y. Document clustering based on non-negative matrix factorization. In Proceedings of the 26th Annual
International ACM SIGIR Conference on Research and Development in Informaion Retrieval, Toronto, ON, Canada, 28 July–1
August 2003; pp. 267–273.
157. Devlin, J.; Chang, M.W.; Lee, K.; Toutanova, K. Bert: Pre-training of deep bidirectional transformers for language understanding.
arXiv 2018, arXiv:1810.04805.
158. Reimers, N.; Gurevych, I. Sentence-BERT: Sentence Embeddings using Siamese BERT-Networks. In Proceedings of the 2019
Conference on Empirical Methods in Natural Language Processing, Association for Computational Linguistics, Hong Kong,
China, 3–7 November 2019.
159. McInnes, L.; Healy, J.; Melville, J. Umap: Uniform manifold approximation and projection for dimension reduction. arXiv 2018,
arXiv:1802.03426.
160. McInnes, L.; Healy, J.; Astels, S. hdbscan: Hierarchical density based clustering. J. Open Source Softw. 2017, 2, 205. [CrossRef]
161. Ramos, J. Using tf-idf to determine word relevance in document queries. In Proceedings of the First Instructional Conference on
Machine Learning, Washington, DC, USA, 21–24 August 2003; Volume 242, pp. 29–48.
162. Gregolinska, E.; Khanam, R.; Lefort, F.; Parthasarathy, P. Capturing the True Value of Industry 4.0; Technical Report; McKinsey &
Company: New York, NY, USA, 2022.
163. Edlich, A.; Jogani, R.; Phalin, G.; Kaniyar, S. Driving Impact at Scale from Automation and AI; Technical Report; McKinsey &
Company: New York, NY, USA, 2019.
164. Garms, F.; Jansen, C.; Schmitz, C.; Hallerstede, S.; Tschiesner, A. Capturing Value at Scale in Discrete Manufacturing with Industry 4.0;
Technical Report; McKinsey & Company: New York, NY, USA, 2019.
165. Behrendt, A.; de Boer, E.; Kasah, T.; Koerber, B.; Mohr, N.; Richter, G. Leveraging Industrial IoT and Advanced Technologies for Digital
Transformation; Technical Report; McKinsey & Company: New York, NY, USA, 2021.
166. Company, M. Global Survey: The State of AI in 2021. 2021. Available online: https://www.mckinsey.com/business-functions/
quantumblack/our-insights/global-survey-the-state-of-ai-in-2021 (accessed on 6 May 2022).
167. Abood, D.; Quilligan, A.; Narsalay, R. Industry X.0 Combine and Conquer; Technical Report; Accenture: Dublin, Ireland, 2019.
168. Schaeffer, E.; Cabanes, J.; Gupta, A. Manufacturing the Future; Technical Report; Accenture: Dublin, Ireland, 2018.
169. Accenture. Technology Trends 2021. 2021. Available online: https://www.accenture.com/_acnmedia/Thought-Leadership-
Assets/PDF-3/Accenture-Tech-Vision-2021-Full-Report.pdf (accessed on 6 May 2022).
170. Corporation, M. Intelligent Manufacturing Made Easy with Microsoft Azure. 2020. Available online: https://azure.microsoft.
com/en-us/resources/intelligent-manufacturing-azure/ (accessed on 6 May 2022).
171. Cooper, P. Microsoft. How You Can Use IoT to Power Industry 4.0 Innovation. Available online: https://azure.microsoft.com/
en-us/blog/how-you-can-use-iot-to-power-industry-4-0-innovation/ (accessed on 6 May 2022).
172. Terino, J.; Hanbury, P.; Sobel, J. Industry 4.0: Getting Digital Manufacturing Right; Technical Report; Bain & Company: Boston, MA,
USA, 2019.
Sensors 2022, 22, 8641 26 of 26

173. Deloitte. Deloitte Survey on AI Adoption in Manufacturing. 2020. Available online: https://www2.deloitte.com/cn/en/pages/
consumer-industrial-products/articles/ai-manufacturing-application-survey.html (accessed on 6 May 2022).
174. PricewaterhouseCoopers. Digital Champions: How Industry Leaders Build Integrated Operations Ecosystems to Deliver End-
to-End Customer Solutions. 2018. Available online: https://www.strategyand.pwc.com/gx/en/insights/industry4-0.html
(accessed on 6 May 2022).
175. PricewaterhouseCoopers. Connected and Autonomous Supply Chain Ecosystems 2025. 2020. Available online: https://www.
pwc.com/gx/en/industries/industrial-manufacturing/digital-supply-chain.html (accessed on 6 May 2022).
176. Colotla, I.; Bland, D.; Knizek, C.; Spindelndreier, D. Avoiding the Hidden Hazards of Industry 4.0; Technical Report; Boston
Consulting Group: Boston, MA, USA, 2018.
177. Group, B.C. Our Perspective on Industry 4.0. Available online: https://www.bcg.com/capabilities/manufacturing/industry-4.0
(accessed on 6 May 2022).
178. Küpper, D.; Lorenz, M.; Kuhlmann, K.; Bouffault, O.; Van Wyck, J.; Köcher, S.; Schlageter, J. AI in the Factory of the Future; Technical
Report; Boston Consulting Group: Boston, MA, USA, 2018.
179. Meho, L.I. Using Scopus’s CiteScore for assessing the quality of computer science conferences. J. Inf. 2019, 13, 419–433. [CrossRef]
180. Pranckutė, R. Web of Science (WoS) and Scopus: The titans of bibliographic information in today’s academic world. Publications
2021, 9, 12. [CrossRef]
181. Wan, C.; Wang, L.; Phoha, V.V. A survey on gait recognition. ACM Comput. Surv. (CSUR) 2018, 51, 89. [CrossRef]