Scribd
Upload
130 views

Tip Oxp

The document describes the features and specifications of the TIP-OXP oxygen detector. It measures oxygen levels from 0-25% with an accuracy of ±0.7% oxygen. It has a digital LCD display, built-in pump, alarm functions, peak hold mode, and operates for 8 hours on two batteries. The device is small, lightweight, and measures oxygen via a galvanic cell method through a 1m sampling tube.

Uploaded by

John Anthony Dana
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
130 views

Tip Oxp

The document describes the features and specifications of the TIP-OXP oxygen detector. It measures oxygen levels from 0-25% with an accuracy of ±0.7% oxygen. It has a digital LCD display, built-in pump, alarm functions, peak hold mode, and operates for 8 hours on two batteries. The device is small, lightweight, and measures oxygen via a galvanic cell method through a 1m sampling tube.

Uploaded by

John Anthony Dana
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MODERN TIP-OXP

OXYGEN DETECTOR
FEATURES
• Digital display (3 digit LCD)
• High Accuracy
• Automatic Suction by built-in pump : Suction flow 800cc/min
• Two measurement & alarm function :Oxygen Decrease & Increase mode
• Alarm indication by buzzer & lamp (LED)
• Two Dry-cell battery operation (R20P x 2 pcs) – 8 hrs cont. operation
• Peak-hold function
• Light weight : 1.3 kg
• Small size : 163(W) x 137(H) x 67(D) mm

TECHNICAL SPECIFICATION
INDICATION UNIT
Model TIP-OXP
Measuring Gas Oxygen
Detection principle Galvanic Cell method
Gas Sampling Suction type by built-in pump, Suction flow : 800cc/min. normal
Tube Length 1m (Standard)
Measuring Range 0 ~ 25% Oxygen
Accuracy Within ±0.7% Oxygen
Display Digital display by LCD panel : minimum 0.1% oxygen
Response Within 10 sec. (90% response) without Tube Length
Measurement Mode OXY. DEC. (Oxygen Decrease mode) .
OXY. INC. (Oxygen Increase mode) By Select Switch of front panel
PEAK HOLD mode ------------------------- By Key Switch of front panel
Alarm Level AL1 : 18% oxygen at Oxygen Decrease mode
AL2 : 23% oxygen at Oxygen Increase mode ----- Adjustible
Alarm Display AL1 : Alarm Lamp and Buzzer will one time flick on per cycle
AL2 : Alarm Lamp and Buzzer will two time flick on per cycle
Operating Conditions 0 ~ 40°C at less than 90%RH
Power Source DC3V : Dry Cell R20P x 2 pcs
Battery Life 8 hours maximum under continuous operation
Sensor Life 2 years
Battery Life Display [LOBAT] Display on LCD panel and Buzzer continuous sounds
Dimensions 163(W) x 137(H) x 67(D) mm
Weight 1.3 kg (without sampling tube)

ACCESSORIES
Vinyl Leather Case 1 pce
Sampling Tube ( 1m ) 1 pce
Sampling lod with W.S. Filter 1 pce
Hexagonal Lench ( 2.5mm ) 1 pce
Instruction Manual 1 copy

Exclusive Agent : Distributed by :


MODERN Automation & Engineering Pte Ltd
Blk 4026, #01-263 Ang Mo Kio Industrial Park 1
Singapore 569637.
Tel : +65 6451 6313 Fax : +65 6451 5501
E-mail : [email protected]
Website : http://www.modernautomation.com.sg

TOKA SEIKI reserves the right to change product design and specification without notice

You might also like