Scribd
Upload
205 views4 pages

Product AI830A

Uploaded by

Vijaya Bhasker
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
205 views4 pages

Product AI830A

Uploaded by

Vijaya Bhasker
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

—

DATA SHEET

AI830A
System 800xA hardware selector

The AI830/AI830A RTD Input Module has 8 channels for


measurement of temperature with resistive elements (RTDs). With 3-
wire connections. All the RTDs must be isolated from ground.

The AI830/AI830A can be used with Pt100, Cu10, Ni100, Ni120 or


resistive sensors. Linearization and conversion of the temperature to
Centigrade or Fahrenheit is performed on the module.
Every channel can be individually configured. The MainsFreq
parameter is used to set mains frequency filter cycle time. This will
give a notch filter at the frequency specified (50 Hz or 60 Hz).

Features and benefits


8 channels for RTD (Pt100, Cu10, Ni100 and Ni120 and resistor) inputs
3-wire connection to RTDs
14 Bit resolution
Inputs are monitored for open-circuit, shortcircuit and has a input grounded sensor

General info
Article number 3BSE040662R1
Type Analog Input
Signal specification 3-wire RTD: Pt100, Cu10, NI100, Ni120 and resistive potentiometer
Number of channels 8
Signal type See table in S800 Modules and Termination Units, 3BSE020924
HART No
SOE No
Redundancy No
High integrity No
Intrinsic safety No
Mechanics S800

DATA SHEET AI830A | 2022-03-28 | Copyright © 2022 ABB 1


Detailed data
Resolution See table in S800 Modules and Termination Units, 3BSE020924-xxx
Isolation Groupwise isolated from ground
Error Error dependent of the field cable resistance: Rerr = R* (0.005 + ∆R/100)
Terr°C = Rerr / (R0 * TCR) Terr°F = Terr°C * 1.8
Temperature drift See table in S800 Modules and Termination Units, 3BSE020924-xxx
Update cycle time 150 + 95 * (number of active channels) ms
CMRR, 50Hz, 60Hz >120 dB (at 10Ω load)
NMRR, 50Hz, 60Hz >60 dB
Rated insulation voltage 50 V
Dielectric test voltage 500 V a.c.
Power dissipation 1.6 W
Current consumption +5 V Modulebus 70 mA
Current consumption +24 V Modulebus 50 mA
Current consumption +24 V external 0

Diagnostics
Front LED’s F(ault), R(un), W(arning)
Supervision Open-circuit, short-circuit,
reference channel, internal power supply
Status indication of supervision Module Error, Module Warning, Channel error (8)

Environment and certification


CE mark Yes
Electrical safety IEC 61131-2, UL 61010-1, UL 61010-2-201
Hazardous Location C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2
Marine certification ABS, BV, DNV-GL, LR
Protection rating IP20 according to IEC 60529
Corrosive atmosphere ISA-S71.04 G3
Climatic operating conditions 0 to +55 °C (Storage -40 to +70 °C), RH=5 to 95 % no condensation, IEC/EN
61131-2
Pollution degree Degree 2, IEC 60664-1
Mechanical operating conditions IEC/EN 61131-2
EMC EN 61000-6-4 and EN 61000-6-2
Overvoltage categories IEC/EN 60664-1, EN 50178
Equipment class Class I according to IEC 61140; (earth protected)
Max ambient temperature 55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F)
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU

Compability
Use with MTU TU810, TU812, TU814, TU830, TU833
Keying code AF

Dimensions
Width 45 mm (1.77”)
Depth 102 mm (4.01”), 111 mm (4.37”) including connector
Height 119 mm (4.7”)
Weight 0.22 kg (0.49 lbs.)

—
Related products

2 DATA SHEET AI830A | 2022-03-28 | Copyright © 2022 ABB


TU810V1 TU812V1

TU814V1 TU830V1

TU833

DATA SHEET AI830A | 2022-03-28 | Copyright © 2022 ABB 3


— —
solutions.abb/800xA 800xA and Symphony Plus is a We reserve all rights to this
solutions.abb/controlsystems registered or pending trademark of document and the items and images
ABB. All rights to other trademarks it contains. The reproduction,
reside with their respective owners. disclosure to third parties or the use
of the content of this document –
We reserve the right to make including parts thereof – are
technical changes to the products or prohibited without ABB’s prior
modify the contents of this written permission.
document without prior notice. With
regard to purchase orders, the Copyright© 2022 ABB All rights
agreed particulars shall prevail. ABB reserved
does not assume any responsibility
for any errors or incomplete
information in this document.

4 DATA SHEET | 2022-03-28 | Copyright © 2022 ABB

You might also like