1/5

TECHNICAL LITERATURE
A Product of

Floor Standing IT Racks

An IT Floor mount Rack Solution from the House of Tata, made from the famous TATA Steelium
CRCA Sheet

ISOMETRIC VIEW ISOMETRIC VIEW

(REAR SIDE)

Floor Mount Gets Built on Its own!

The Floor Mounted racks has been designed in such a way that its easy to install and offers flexibility in
several features.

Flexibility in 19” standard size for compatibility with TRYNOX PDU’s, Cable Managers and other accessories

Simple guideline for easy installation at desired locations which saves time and money
2/5

Our Standard Stackable range

Sl No Capacity Width Depth
1 17 U 600 600/800
2 22 U 600 600/800
3 24 U 600 600/800
4 27 U 600 600/800
5 32U 600/800 800/1000
6 36U 600/800 800/1000
7 42U 600/800/1000 800/1000/1200

Overview

Standard Rack configuration would be welded frame with 4 nos. of pillars of 1.5 mm thick CRCA sheet of 8
folded profile and welded from top to bottom for reinforcement.

This is joined to top cover and bottom cover having air cooled ventilation for exhaust of hot air. Front
door having provision of glass as well as perforation with adequate ventilation in the rear door. Both the
Side panels are fitted with slam latches for easy removal.

General Arrangement
D

Top cover
1000

Welded Frame
DETAIL C DETAIL D
SCALE 1 : 2 SCALE 1 : 1
19"Mounting angle
Side panel 800
Integrated Honeycomb Integrated Honeycomb
Single Door Spacer Channel 466 Double Door
Depth Section
C
TOP VIEW 451
1970

1970

LHS VIEW FRONT VIEW Middle Depth RHS VIEW INTERNAL FRONT VIEW REAR VIEW
Section

Bottom cover

BOTTOM VIEW *Shown Drg is representative to nature, it's may be different from actual

A Product of
3/5

Front and Rear Door

Technical Characteristics
Certifications

• Degrees of Ingress Protection, IP 20 according to IEC 60529

• Degree of Impact Protection, IK 08 according to IEC 62262
• Corrosion Resistance through Salt Spray test according to ISO 9227 for 168 hours protection
• Weight carrying capacity ( Certified through In-house Tests - 1250 Kg )
• Process validations thru’ NABL labs Ensures a Compliant & Robust Product

Powder Coating

• Fine texture finish achieved through Epoxy polyester Hybrid Powder

• Booth is designed to prevent excessive powder loss to comply Environment regulations.
• Booth deploys modern Recycle & Auto Reciprocator system to deliver required DFT. Standard
being set for 60-80 Microns for our standard product range

The powder coating ensures the following

• 60 – 80 Micron powder deposit

• Fine Texture Finish for Aesthetic appearance
• High Scratch resistance against any sharp object

A Product of
4/5

Earthing Solutions

• DIN standard earthing solutions are available on request

• Clean earth system with a Electrolytic Copper 99.99 % Pure, running as per demand is possible to
configure in factory built assembly With Leakage current results certifications

Features

FRAME DOORS SUPPORT CHANNELS

1.5 mm CRCA Multi Fold Front & Rear door Full height Support Channel gets screw
Fabricated Frame to achieve flush till top Cover. Absence of fixed directly to front & Rear
high structural Strength. Horizontal gap between the frame. Gives High strength Load
Designed to carry load of 1250 door and the top panel. gets divide on robust Welded
Kgs. 45 degree Oblong pattern on Frame.
the front door
Easy to Assemble with the SKD
design

TOP PANEL HONEYCOMB – SINGLE

19” RAILS
AND DOUBLE DOORS
Made of 1.2 mm CRCA and Provision for Honeycomb single 4 nos. U marked Rails made of
concealed from exterior view. and double door with 3 Point 1.6 mm CRCA sheet.
Allows provision for 4 nos. Fan locking system of high end
mounting. make hardware’s. These are adjustable with the
depth space provided in the
Helps in easy installation like rack
cable tray support

A Full 42 U Rack will include the following

• Fully perforated/Honeycomb front door with CAM/3P locking system
• Single/Split fully perforated/Honeycomb door with rear CAM/3P locking system
• Single/Split Side doors with Slam Latch locking
• 4 Nos. of 19” Rails
• Top Cover with provision for 4 nos. of Fan units
• 2 Nos. of full height cable mounting brackets
• 4 Nos. of Casters – 2 with Brake and 2 without Brake
• Mounting Bolts (Optional)
• Mounting Hardware (includes cage nuts, washers, screws etc)
• Necessary Keys for the Locks
• 5 Ply Carton packaging with edge protectors

A Product of
5/5

Dimensions
Accessories
SL No. Items Default Fast Running Slow Moving

1 PDU 
2 Castors 
3 Levellers 
4 Horizontal PVC Cable Organizer 1U 
5 Metal Cable Manager 1U Loop 
6 PVC Cable Manager 2 U 
7 PVC Cable Manager 2 U - 42U 
8 90 CFM AC Fan 
9 Tower Mount Fans Modules 
10 Mounting Hardware - Pkt 20 Set of 20 
11 Cable Channel - 1600H x 100W 
12 Cable Channel - 1200H x 100W 
13 Sliding Drawer - 600D 
14 Sliding Drawer - 700D 
15 Keyboard Shelf - Rotating 
16 Fixed Shelf / Monitor Tray - 600D 
17 Fixed Shelf / Monitor Tray - 700D 
18 Support Angle - 50x50x600D 
19 Support Angle - 50x50x700D 
20 Cable Runaway Lader - 1 Mtr 
21 Earthing Strip - 150 mm Nickle Plating 
22 Blank Panel - 1U 

A Product of