Scribd
Upload
40 views

Omron Pinout

This document provides specifications for connector models used to connect devices that output 8-bit, 9-bit, or 10-bit signals. It lists the pin numbers and wire colors for pre-wired and non-pre-wired connector models, noting that pin assignments and outputs can vary depending on the specific model used. Shielding and power are addressed for proper grounding and voltage connections.

Uploaded by

Alessandro Deflora
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
40 views

Omron Pinout

This document provides specifications for connector models used to connect devices that output 8-bit, 9-bit, or 10-bit signals. It lists the pin numbers and wire colors for pre-wired and non-pre-wired connector models, noting that pin assignments and outputs can vary depending on the specific model used. Shielding and power are addressed for proper grounding and voltage connections.

Uploaded by

Alessandro Deflora
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Connection Specifications

Connector Models Pre-wired Models


Model E6C3-AG5C/E6C3-AG5B
Model E6C3-AG5C-C Output signal
Output signal 10-bit (720 or
8-bit (256) 9-bit (360) 10-bit (720) 8-bit (256) 9-bit (360)
Pin No. Wire color 1,024)
1 Not connected 29 Brown 20 20 20
2 } Connected
internally 28 28 Orange 21 21 21
3 25 25 25 Yellow 22 22 22
4 21 21 21 Green 23 23 23
5 20 20 20 Blue 24 24 24
6 27 27 27 Purple 25 25 25
7 24 24 24 Gray 26 26 26
8 22 22 22 White 27 27 27
9 23 23 23 Pink Not connected 28 28
10 26 26 26 Light blue Not connected Not connected 29
11 Shield (ground) --- Shield (ground)
12 12 to 24 VDC Red 12 to 24 VDC
13 0 V (common) Black 0 V (common)
* Connector: RP13A-12PD-13SC (Hirose Electric Co., Ltd.) Note:
Normally connect GND to 0 V or to an external ground.

You might also like