REPORT.

TXT

**************************************************
* *
* T G P I L E S *
* *
* PILE GROUP ANALYSIS AND PILE CAP DESIGN *
* *
* version 02.01 *
* (FEBRUARY) *
* *
* COPYRIGHT (C) 94-02 TIME: 11:46 *
* ALL RIGHTS RESERVED DATE: 11-01-2002 *
**************************************************

TGPILES PROGRAM PAGE 1

**********************************************************************
EXAMPLE NUMBER 3 - 16 PILE GROUP W/ MOMENTS - TGPILES MANUAL
**********************************************************************

PILE CONFIGURATION INFORMATION

------------------------------

NUMBER OF PILES : 16 UNIT = INCHES

PILE# X-COORD. Y-COORD

***** ******* *******

1 -54.000 54.000
2 -18.000 54.000
3 18.000 54.000
4 54.000 54.000
5 -54.000 18.000
6 -18.000 18.000
7 18.000 18.000
8 54.000 18.000
9 -54.000 -18.000
10 -18.000 -18.000
11 18.000 -18.000
12 54.000 -18.000
13 -54.000 -54.000
14 -18.000 -54.000
15 18.000 -54.000
16 54.000 -54.000

TGPILES PROGRAM PAGE 2

**********************************************************************
EXAMPLE NUMBER 3 - 16 PILE GROUP W/ MOMENTS - TGPILES MANUAL
**********************************************************************

LOADING INFORMATION
-------------------

Page 1
 REPORT.TXT

WORKING DEAD LOAD (kips) = 900.00

WORKING LIVE LOAD (kips) = 740.00
WORKING WIND LOAD (kips) = 200.00

APPLIED WORKING MOMENT ABOUT X-AXIS (kip-ft.) :

DEAD LOAD = 20.00
LIVE LOAD = 15.00
WIND LOAD = 250.00

APPLIED WORKING MOMENT ABOUT Y-AXIS (kip-ft.) :

DEAD LOAD = 24.00
LIVE LOAD = 18.00
WIND LOAD = 290.00

TGPILES PROGRAM PAGE 3

**********************************************************************
EXAMPLE NUMBER 3 - 16 PILE GROUP W/ MOMENTS - TGPILES MANUAL
**********************************************************************

PILE LOADS EXCLUDING THE CAP WEIGHT

***********************************

ANALYSIS RESULTS
****************

COORDINATES OF CENTER OF GRAVITY DUE TO APPLIED LOADS

*****************************************************
X-COORD. OF C.G. (inches) = 0.00
Y-COORD. OF C.G. (inches) = 0.00

PILE LOADS DUE TO AXIAL AND BENDING FORCES

loads on piles are working loads (kips)
******************************************
WORKING PILE CAPACITY = 200.00 KIPS

PILE NUMBER MAX. LOAD MIN. LOAD

*********** *********** ***********

1 128.325 55.150 O.K.

2 124.192 56.550 O.K.
3 124.892 56.950 O.K.
4 130.425 57.350 O.K.
5 123.575 55.817 O.K.
6 119.442 56.217 O.K.
7 120.142 56.617 O.K.
8 125.675 57.017 O.K.
9 122.992 55.483 O.K.
10 118.858 55.883 O.K.
11 119.558 56.283 O.K.
12 125.092 56.683 O.K.
13 126.575 54.150 O.K.
Page 2
 REPORT.TXT
14 122.442 55.550 O.K.
15 123.142 55.950 O.K.
16 128.675 55.350 O.K.

TGPILES PROGRAM PAGE 4

**********************************************************************
EXAMPLE NUMBER 3 - 16 PILE GROUP W/ MOMENTS - TGPILES MANUAL
**********************************************************************

PILE LOADS INCLUDING THE CAP WEIGHT

***********************************

ANALYSIS RESULTS
****************

COORDINATES OF CENTER OF GRAVITY DUE TO APPLIED LOADS

*****************************************************
X-COORD. OF C.G. (inches) = 0.00
Y-COORD. OF C.G. (inches) = 0.00

PILE LOADS DUE TO AXIAL AND BENDING FORCES

loads on piles are working loads (kips)
******************************************
WORKING PILE CAPACITY = 200.00 KIPS

PILE NUMBER MAX. LOAD MIN. LOAD

*********** *********** ***********

1 133.940 60.765 O.K.

2 129.807 62.165 O.K.
3 130.507 62.565 O.K.
4 136.040 62.965 O.K.
5 129.190 61.432 O.K.
6 125.057 61.832 O.K.
7 125.757 62.232 O.K.
8 131.290 62.632 O.K.
9 128.607 61.099 O.K.
10 124.474 61.499 O.K.
11 125.174 61.899 O.K.
12 130.707 62.299 O.K.
13 132.190 59.765 O.K.
14 128.057 61.165 O.K.
15 128.757 61.565 O.K.
16 134.290 60.965 O.K.

TGPILES PROGRAM PAGE 5

**********************************************************************
EXAMPLE NUMBER 3 - 16 PILE GROUP W/ MOMENTS - TGPILES MANUAL
**********************************************************************

SHEAR FORCES AND RATIOS FOR VARIOUS CONDITIONS

**********************************************

**** TWO WAY SHEAR - ACI (CASE 1)- X-DIR.

Page 3
 REPORT.TXT

Vc = 2323.24 (kips) Vu = 1982.84 (kips) Vu/Vc = 0.853

**** ONE WAY SHEAR - TGPILES (CASE 5)- X-DIR.

Vc = 832.85 (kips) Vu = 667.37 (kips) Vu/Vc = 0.801

**** TWO WAY SHEAR - ACI(CASE 1) - Y-DIR.

Vc = 2323.24 (kips) Vu = 1982.84 (kips) Vu/Vc = 0.853

**** ONE WAY SHEAR - TGPILES (CASE 6) - Y-DIR.

Vc = 832.85 (kips) Vu = 666.30 (kips) Vu/Vc = 0.800

**** SINGLE PILE SHEAR CHECK

Vc = 1124.22 (kips) Vu = 320.00 (kips) Vu/Vc = 0.285

**** CORNER PILE PUNCHING SHEAR CHECK

Vc = 1511.70 (kips) Vu = 320.00 (kips) Vu/Vc = 0.212

**** CORNER PILE ONE WAY SHEAR CHECK

Vc = 323.03 (kips) Vu = 320.00 (kips) Vu/Vc = 0.991

TGPILES PROGRAM PAGE 6

**********************************************************************
EXAMPLE NUMBER 3 - 16 PILE GROUP W/ MOMENTS - TGPILES MANUAL
**********************************************************************

DESIGN RESULTS
**************

CIRCULAR COLUMN = NO
COLUMN DIMENSIONS (in.) = 36.00X 36.00
CONCRETE STRENGTH (psi) = 4000.00
STEEL YIELD STRENGTH (psi) = 60000.00
STEEL COVER AT THE BOTTOM (in.) = 10.00
EDGE DISTANCE (in.) = 21.00
PILE DIAMETER (in.) = 8.00
ULTIMATE COL. AXIAL LOAD (kip) = 2518.00

FINAL PILE CAP DIMENSIONS

*************************

TOTAL LENGTH ALONG X AXIS = 12 ft.- 6 in.

TOTAL LENGTH ALONG Y AXIS = 12 ft.- 6 in.
TOTAL REQUIRED DEPTH INCLUDING 10.00 INCHES COVER = 48.00 INCHES

FLEXURAL REINFORCING STEEL

**************************

Page 4
 REPORT.TXT
USE 1 ROW(S) OF 13 # 10 BARS ALONG X AXIS
steel area req.= 16.35 sq. in., steel ratio =0.0024,Mu= 2002.10 kip-ft.

USE 1 ROW(S) OF 13 # 10 BARS ALONG Y AXIS

steel area req.= 16.32 sq. in., steel ratio =0.0024,Mu= 1998.89 kip-ft.

QUANTITY TAKE OFF

*****************

TOTAL CONCRETE VOLUME (cubic yard) = 23.17

TOTAL WEIGHT OF THE STEEL (pounds) = 1461.48

Page 5