Scribd
Upload
222 views2 pages

Ops - 25

This document provides technical data and information about EXOSEL OPS 25, a special emulsifier for manufacturing emulsion polymers. It is an alkyl aryl polyglycol ether sulphate sodium salt that combines advantages of non-ionic and anionic emulsifiers, allowing it to be used as the sole emulsifier. Specifications include an anionic surfactant content of 29-31%, pH of 7.0-8.0, and minimum solid content of 29%. Dosage depends on the type and amount of monomers used, as well as the polymerization process and desired polymer properties, but is generally 1-5% of the monomer content. The emulsifier should be stored at room temperature and protected from heat and

Uploaded by

KETAN SHAH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
222 views2 pages

Ops - 25

This document provides technical data and information about EXOSEL OPS 25, a special emulsifier for manufacturing emulsion polymers. It is an alkyl aryl polyglycol ether sulphate sodium salt that combines advantages of non-ionic and anionic emulsifiers, allowing it to be used as the sole emulsifier. Specifications include an anionic surfactant content of 29-31%, pH of 7.0-8.0, and minimum solid content of 29%. Dosage depends on the type and amount of monomers used, as well as the polymerization process and desired polymer properties, but is generally 1-5% of the monomer content. The emulsifier should be stored at room temperature and protected from heat and

Uploaded by

KETAN SHAH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Acar Kimya A.Ş.

Tuzla Deri Org.San.Bölgesi 15.Yol


6-2B Parsel TUZLA - ISTANBUL
Tel : 0090 216 577 10 10
Fax: 0090 216 577 42 80
[email protected]

TECHNICAL DATA SHEET


EXOSEL OPS 25

Use Special emulsifier for the manufacture of emulsion


polymers, especially for vinylacetate or acrylic
homopolymers and copolymers.

On account of its chemical composition,


EXOSEL OPS 25 combines the advantages of
non-ionic and anionic emulsifiers, and can therefore
be used as the sole emulsifier for emulsion
polymerization.

Composition Alkyl aryl polyglycol ether sulphate, sodium salt

Specification Anionic surfactant 29 - 31 %


(Q-C 3062.0)
Sodium chlorid < 0.5 %
(DGF H-III 9)
Sodium sulphate < 1.0 %
(DGF H-III 8a)
pH-value (5 %) 7.0 - 8.0
(Q-P 1042.1)
Solid content Min 29%
(DIN 53189)

Additional data Appearance colourless to yellow,


clear liquid

Ionic character Anionic


Acar Kimya A.Ş.
Tuzla Deri Org.San.Bölgesi 15.Yol
6-2B Parsel TUZLA - ISTANBUL
Tel : 0090 216 577 10 10
Fax: 0090 216 577 42 80
[email protected]

Dosage The amount required depends upon the type and


quantity of the monomers used as well as on the
polymerization process and the desired properties of the
polymer dispersion.

In general 1 - 5 % AS emulsifier calculated on the monomer


content is used.

Miscellaneous Storage

It is recommended to store EXOSEL OPS 25 at room temperature


and to protect it from heat and frost. Subject to storage in the
original sealed containers the product is durable for at least 12
months.

Subject to appropriate storage under the usual storage and temperature conditions, our products are
durable for at least 1 year.

You might also like