Scribd
Upload
77 views1 page

LLG - Maraba Al Iraq Al Khadra'a - 20221213125416-DigiCert

This certificate examines a four leg steel wire rope sling used for lifting. The sling has a safe working load of 6.9 tonnes at angles between 0-45 degrees. It passed inspection and is valid until its next scheduled examination on June 12, 2023. The inspector certified that the sling was visually and functionally examined according to international standards.

Uploaded by

Ali Alahma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views1 page

LLG - Maraba Al Iraq Al Khadra'a - 20221213125416-DigiCert

This certificate examines a four leg steel wire rope sling used for lifting. The sling has a safe working load of 6.9 tonnes at angles between 0-45 degrees. It passed inspection and is valid until its next scheduled examination on June 12, 2023. The inspector certified that the sling was visually and functionally examined according to international standards.

Uploaded by

Ali Alahma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CERTIFICATE

Of Thorough Examination Of Lifting Gears/Appliances

Client's Name : Maraba Al Iraq Al Khadra'a Date of Inspection : 13-12-2022


Address : Oil Operation Street, Near Police Training Certificate No. : LTG-IQ/A247420
Job No. : 4037
Center Burjesia Basra : Iraq Basra : Iraq Reference Standard : BS EN 13414-1,2:2003+ A2:2008
61006 Inspection Method : DOC/WR/006, ISSUE : 02,
01.03.2015
Type Of Inspection : In-Service Inspection

Site Name : Liftek Facility Sub Location :


Asset Serial Number
Or FOUR LEG STEEL WIRE ROPE SLING Quantity Safe Working Load At (0-45°)
Owner's ID
Description: 16mm dia, 6X19 IWRC, Galvanized,
A633 grade 1960 N/mm2, RHOL 4 Legs wire rope sling c/w
Master link assembly (T32B) on top with hard eyes
legs terminating with soft eyes secured with
aluminium ferrule
Diameter: 16 (mm)
Effective Working Length: 4 (m)
01 6.9 (Tonne)
Safety Factor: 5:1

VALIDITY OF THIS CERTIFICATE CEASES IN THE EVENT THE


Due Date of Next Inspection
EQUIPMENT UNDERGOES A MAJOR REPAIR OR ALTERATION, IN
12-06-2023
WHICH CASE IT MUST BE RETESTED.

Details of Deviations/Omissions from original scope of work (if any): Details of Sub contracted work (if any):
NIL NIL
Equipment Used: Result: PASS

Name and Signature of Inspector :AHMED JIHAD Counter Signature

This is to certify that the above signed competent inspector has visually and functionally examined the equipment as per international standards.The
certificate has been prepared in accordance with requirements of EIAC requirements and shall not be reproduced except in full without the approval of the
inspection body and the client. No detail contained herein shall be deemed to relieve any designer, manufacturer, seller, repairer or operator of any warranty,
express or implied. Liftek Iraq's liability shall be limited to the acts or omissions of its employees, agents and subcontractors. Under no circumstance
whatsoever shall Liftek Iraq be liable for any injury or damage to any person or equipment occurring by negligent, incorrect operation or maintenance, defects
in material, wear and tear damages of machinery or other items related to the items covered by this certificate.

F/7.5/R53 Issue:01/Rev 01 18-12-2016

L8S2F1M

This is an electronically generated document and does not


require a stamp. Click/Scan the QR Code to verify

You might also like