Scribd
Upload
483 views2 pages

Sop Piling Work

This document outlines the standard operating procedures for pile foundation installation works at a project site. It details safety protocols that must be followed, including ensuring all operations are supervised by a qualified foreman and providing adequate lighting for night work. Rig safety measures are also specified, such as maintaining proper distances between rigs and electric lines. The procedures describe safety precautions during piling operations, such as workers wearing helmets and using ropes to guide piles being hoisted into position.

Uploaded by

amir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
483 views2 pages

Sop Piling Work

This document outlines the standard operating procedures for pile foundation installation works at a project site. It details safety protocols that must be followed, including ensuring all operations are supervised by a qualified foreman and providing adequate lighting for night work. Rig safety measures are also specified, such as maintaining proper distances between rigs and electric lines. The procedures describe safety precautions during piling operations, such as workers wearing helmets and using ropes to guide piles being hoisted into position.

Uploaded by

amir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

KLL PILING & JACK IN SDN BHD

STANDARD OPERATING PROCEDURES


PROJECT LOCATION PACKAGE CO2- N2 & H2 YARD ILING WORKS DATE: 15.02.2023

Introduction

Pile foundations are responsible for transmitting heavy concentrated loads of the
superstructure to the underlying competent strata. Installation of pile foundations requires a
lot of heavy-duty equipment, which makes it essential to follow the standard safety
protocols.

1. Safety program
 All operations shall be carried out under the immediate charge of a qualified
and competent foreman who shall also be responsible for the safety
arrangements of the work.
 For work during the night, the lighting shall be provided at the worksite.
 Every crane driver or hoisting appliance operator shall be competent to the
satisfaction of the engineer-in-charge.

2. Piling rig safety


 The pile drivers shall not be erected in dangerous proximity to electric
conductors.
 If two pile drivers are to be erected at one place, these shall be separated by
a distance at least equal to the most extended leg in either rig.
 The frame of the rig shall be structurally safe for all anticipated live, dead, or
wind loads.
 No pile driving equipment shall be taken into use until it has been inspected
and found to be safe.
 The rig shall be secured with a minimum of two guys to ensure the stability
to prevent accidents due to wind, storm, gales, and earthquake.
 When the hammer is not in use, it shall be in dropped position and held in
place by a cleat, timber, or another suitable means.

3. Safety precaution during operation


 The workers employed in the vicinity of pile drivers shall wear helmets
conforming to accepted standards.
 The pile shall be prepared at a distance at least equal to twice the length of
the longest pile from the pile driver.
 Piles being hoisted in the right should be so slung that they do not have to
be swung or whip-round.
 A hand rope shall be tied to a pile that is being hoisted to guide and control
its movement.
 When a pile is guided into position, workers shall not put their hands or
arms between the pile and the inside guide, but shall use a rope for guiding.
 A pile shall be provided with an iron ring or cap over the driving end to
prevent grooming before the pile is hoisted.
KLL PILING & JACK IN SDN BHD

STANDARD OPERATING PROCEDURES


PROJECT LOCATION PACKAGE CO2- N2 & H2 YARD ILING WORKS DATE: 15.02.2023

You might also like