BLIND RIVETS

BLIND RIVET NUTS

RIVETING TOOLS

so much choice it
will drive you nuts!

1
 ABOUT US

Preface
We are proud to present our new catalogue. We are specialists in the field

catalogue, which includes a complete of blind riveting, thanks to our many

range of blind riveting products. years of experience.

Rivet-Expert represents
a group of manufacturers, each with Our R&D department can develop custom

their unique specialization, who can products in consultation with the client.

guarantee the DIN 7337 quality standard.

Our catalogue gives you an overview

We offer a complete range of blind of our standard products and their

rivets, blind rivet nuts, hand and applications. We are ready to support you

pneumatic tools, as well as a newly with expert advice.

developed line of battery-driven

riveting tools. These tools are of an All products are available in principle

exceptionally high quality and have from stock. Fast delivery, optimal

enough traction power to process the service, and contract compliance are our

entire range of rivets offered in this standard business practice.

3
good tools are a joy forever.

4
1 BLIND RIVETS CONTENTS

1.1 RIV-LINK standard blind rivet series

characteristics & applications 13

aluminium alloy / steel dome 14
aluminium alloy / steel large/extra large 17
aluminium alloy / steel countersunk 19

steel / steel dome 21
steel / steel large/extra large 23
steel / steel countersunk 25

stainless steel A2 / stainless steel A2 dome 26
stainless steel A2 / stainless steel A2 large/extra large 28
stainless steel A2 / stainless steel A2 countersunk 30

stainless steel A4 / stainless steel A4 dome 31

aluminium alloy / stainless steel A2 dome 32
aluminium alloy / stainless steel A2 large/extra large 32
aluminium alloy / stainless steel A2 countersunk 33

copper / steel dome 34

copper / bronze dome 35

aluminium alloy / aluminium alloy dome 36
aluminium alloy / aluminium alloy countersunk 36

1.2 SEAL-LINK gas- and waterproof blind rivets

characteristics & applications 37

aluminium alloy / steel dome 38
aluminium alloy / steel countersunk 39

steel / steel dome 40
steel / steel large 41

stainless steel A2 / stainless steel A1 dome 42
stainless steel A2 / stainless steel A1 large 43

aluminium alloy / stainless steel A2 dome 44
aluminium alloy / stainless steel A2 countersunk 45

aluminium alloy / aluminium alloy dome 46
aluminium alloy / aluminium alloy countersunk 47

5
 CONTENTS 1 BLIND RIVETS

1.3 MULTI-LINK blind rivets

characteristics & applications 49

aluminium alloy / steel dome 50
aluminium alloy / steel large/extra large 51
aluminium alloy / steel countersunk 53

aluminium alloy / stainless steel A2 dome 54
aluminium alloy / stainless steel A2 large/extra large 55
aluminium alloy / stainless steel A2 countersunk 57

steel / steel dome 58

stainless steel A2 / stainless steel A2 dome 59
stainless steel A2 / stainless steel A2 countersunk 59

1.4 TRI-LINK blind rivets

characteristics & applications 61

aluminium alloy / aluminium alloy dome 62

1.5 SPECIALS blind rivets

characteristics & applications 63

peel type: aluminium alloy / steel dome 64

aluminium alloy / steel large/extra large 64

grooved type: aluminium alloy / steel dome 65

hammer drive: aluminium alloy / stainless steel A2 extra large 66

6
1 BLIND RIVETS / STRUCTURAL BLIND RIVETS CONTENTS

1.6 P-LINK structural blind rivets

characteristics & applications 67

steel / steel dome 68
steel / steel countersunk 69

stainless steel A2 / stainless steel A2 dome 70
stainless steel A2 / stainless steel A2 countersunk 71

aluminium alloy / aluminium alloy dome 72

aluminium alloy / aluminium alloy countersunk 73

1.7 A-LINK structural blind rivets

characteristics & applications 75

steel / steel dome 76

stainless steel A2 / stainless steel A2 dome 77
stainless steel A2 / stainless steel A2 countersunk 77

1.8 H-LINK structural blind rivets

characteristics & applications 79

steel / steel dome 80
aluminium alloy / aluminium alloy dome 80

1.9 M-LINK structural blind rivets

characteristics & applications 81

steel / steel dome 82
steel / steel countersunk 83

stainless steel A2 / stainless steel A2 dome 84
stainless steel A2 / stainless steel A2 countersunk 85

aluminium alloy / aluminium alloy dome 86

aluminium alloy / aluminium alloy countersunk 87

intro fastening technology 89

7
blind rivet fastening technology 90
 CONTENTS 2 BLIND RIVET NUTS

technical characteristics & types 93

CYLINDRICAL HEAD blind rivet nuts/bolts

steel knurled body / open end 96

aluminium knurled body / open end 97

stainless steel A2 knurled body / open end 98

stainless steel A4 round shaft / open end 99

steel knurled body / closed end 100

steel semi-hexagon body / open end 101

stainless steel A2 semi-hexagon body / open end 102

steel full-hexagon body / open end 103

steel knurled body / blind rivet bolt 104

E.P.D.M rubber / brass round shaft / open end 105

COUNTERSUNK HEAD blind rivet nuts

steel knurled body / open end 106

aluminium knurled body / open end 107

stainless steel A2 knurled body / open end 108

steel knurled body / closed end 109

REDUCED COUNTERSUNK HEAD blind rivet nuts

steel knurled body / open end 110

steel round shaft / open end 111

aluminium knurled body / open end 112

stainless steel A2 knurled body / open end 113

stainless steel A4 round shaft / open end 114

steel semi-hexagon body / open end 115

8
2 BLIND RIVET NUTS CONTENTS

stainless steel A2 semi-hexagon body / open end 116

steel full-hexagon body / open end 117

SPECIALS blind rivet nuts / pin and collars

blind rivet nut M16 / steel 118

blind rivet nut, closed end, complete with fixed sealing 118

blind rivet nut, full-hexagon body steel, closed end, complete with fixed sealing 118

standard split nut 118

pre-bulb split nut 118

pin and collar with standard breakpoint 118

pin and collar with multi-grip 118

intro fastening technology 121

blind rivet nut fastening technology 122

9
 CONTENTS 3 RIVETING HAND TOOLS

introduction 129

RIVETING HAND TOOLS

PULL-LINK NOVA RIVETING TOOLS WITH POWER TRANSMISSION

NOVA 64R - blind rivet tool 130

NOVA 12N - blind rivet nut / bolt tool 130

PULL-LINK BLIND RIVET TOOLS

PLR in cardboard box or assortment kit 131

PLRS in cardboard box or assortment kit 131

PL-80R in cardboard box 132

PL-50R in cardboard box 133

PL-64R in cardboard box or assortment kit 133

Overview nosepieces for PULL-LINK hand blind rivet tools 134

PULL-LINK BLIND RIVET NUT / BOLT TOOLS

PLN in cardboard box or assortment kit 135

PL-6N in cardboard box or assortment kit 135

PL-6NS in cardboard box or assortment kit 136

PL-10N in cardboard box or assortment kit 136

PL-10NS in cardboard box or assortment kit 137

PL-12N in cardboard box or assortment kit 137

10
4 POWER TOOLS CONTENTS

introduction 139

BATTERY-DRIVEN TOOLS
PULL-LINK PB SERIES

PB 50 from 2,4 up to 5,0 mm standard blind rivets all material 140

PB 64 from 4,0 up to 6,4 mm standard/structural blind rivets all material 141

PNEUMATIC / HYDRAULIC TOOLS

PULL-LINK AS SERIES

AS-1 from 2,4 up to 4,8 mm standard blind rivets all material 142

AS-2 from 4,0 up to 6,4 mm standard blind rivets all material 142

AS-3 from 4,8 up to 6,4 mm standard/structural blind rivets all material 143

AS-4 from M3 up to M12 blind rivet nuts all material 143

11
 i can fix this.
it’s easy.

12
 CHARACTERISTICS & APPLICATIONS

1 BLIND RIVETS
1.1 RIV-LINK
CHARACTERISTICS
Standard blind rivets of various types in aluminium, steel, copper, and
stainless steel

Available in diameters 2,4 - 3,0 - 3,2 - 4,0 - 4,8 - 5,0 - 6,0 and 6,4

Types: dome head – large head – extra-large head, and countersunk head

All rivets are available in all RAL colours

Stainless steel mandrels come standard as grooved and with a conical

mandrel head, without a sharp point to protect the user.

APPLICATIONS
For general use in plate work and profiles of aluminium, steel, stainless steel,
and copper

13
 BLIND RIVETS RIV-LINK

RIV-LINK standard blind rivets

MATERIALS FINISH
aluminium
alloy polished
(AIMg 2,5)

carbon steel zinc plated

AIMg 2,5 / STEEL DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

2,4 4,0 0,0 ~ 2,0 H2K-24040

[+0,08/-0,10] 6,0 1,5 ~ 3,5 H2K-24060 5,0 0,7
8,0 3,5 ~ 5,5 H2K-24080 [+0/- [+/- 1,45 27 353 315
2,5 mm 10,0 5,5 ~ 7,5 H2K-24100 0,7] 0,15]

3,0 4,0 0,0 ~ 1,5 H2K-30040
[+0,08/-0,10] 6,0 1,5 ~ 3,5 H2K-30060
8,0 3,5 ~ 5,5 H2K-30080 6,5 0,8
3,1 mm 10,0 5,5 ~ 7,5 H2K-30100 [+0/- [+/- 1,75 27 810 620
12,0 7,5 ~ 9,5 H2K-30120 0,7] 0,20]
14,0 9,0 ~ 11,0 H2K-30140
16,0 11,0 ~ 13,0 H2K-30160

3,2 4,0 0,0 ~ 1,5 H2K-32040
[+0,08/-0,10] 6,0 1,5 ~ 3,0 H2K-32060
8,0 3,0 ~ 5,0 H2K-32080
3,3 mm 10,0 5,0 ~ 7,0 H2K-32100 6,5 0,8
12,0 7,0 ~ 9,0 H2K-32120 [+0/- [+/- 1,75 27 980 760
14,0 9,0 ~ 11,0 H2K-32140 0,7] 0,20]
16,0 11,0 ~ 12,5 H2K-32160
18,0 12,5 ~ 14,5 H2K-32180
20,0 14,5 ~ 16,5 H2K-32200

14
 RIV-LINK BLIND RIVETS

RIV-LINK standard blind rivets

MATERIALS FINISH
aluminium
alloy polished
(AIMg 3,5)

carbon steel zinc plated

AIMg 3,5 / STEEL DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

4,0 6,0 1,0 ~ 2,0 H3K-40060

[+0,08/-0,15] 8,0 2,0 ~ 4,0 H3K-40080
10,0 4,0 ~ 6,0 H3K-40100
4,1 mm 12,0 6,0 ~ 8,0 H3K-40120
14,0 8,0 10,0 H3K-40140 8,0 1,0
16,0 10,0 ~ 12,0 H3K-40160 [+0/- [+/- 2,10 27 1.600 1.200
18,0 12,0 ~ 14,0 H3K-40180 1,0] 0,30]
20,0 14,0 ~ 15,5 H3K-40200
23,0 15,5 ~ 18,0 H3K-40230
25,0 18,0 ~ 20,0 H3K-40250

4,8 6,0 1,0 ~ 2,0 H3K-48060

[+0,08/-0,15] 8,0 2,0 ~ 3,5 H3K-48080
10,0 3,5 ~ 5,5 H3K-48100
4,9 mm 12,0 5,5 ~ 7,5 H3K-48120
14,0 7,5 ~ 9,5 H3K-48140
16,0 9,0 ~ 11,0 H3K-48160 9,5 1,1
18,0 11,0 ~ 13,0 H3K-48180 [+0/- [+/- 2,70 27 2.230 1.690
20,0 13,0 ~ 15,0 H3K-48200 1,0] 0,30]
22,0 15,0 ~ 17,0 H3K-48220
25,0 17,0 ~ 20,0 H3K-48250
28,0 20,0 ~ 23,0 H3K-48280
30,0 23,0 ~ 24,5 H3K-48300
35,0 24,5 ~ 29,0 H3K-48350
40,0 29,0 ~ 33,0 H3K-48400

15
 BLIND RIVETS RIV-LINK

RIV-LINK standard blind rivets

MATERIALS FINISH
aluminium
alloy polished
(AIMg 3,5)

carbon steel zinc plated

AIMg 3,5 / STEEL DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

5,0 6,0 1,0 ~ 2,0 H3K-50060

[+0,08/-0,15] 8,0 2,0 ~ 3,5 H3K-50080
10,0 3,5 ~ 5,5 H3K-50100
5,1 mm 12,0 5,5 ~ 7,5 H3K-50120
14,0 7,5 ~ 9,5 H3K-50140
16,0 9,0 ~ 11,0 H3K-50160 9,5 1,1
18,0 11,0 ~ 13,0 H3K-50180 [+0/- [+/- 2,70 27 2.500 2.000
20,0 13,0 ~ 15,0 H3K-50200 1,0] 0,30]
25,0 15,0 ~ 20,0 H3K-50250
28,0 20,0 ~ 23,0 H3K-50280
30,0 23,0 ~ 24,5 H3K-50300
35,0 24,5 ~ 29,0 H3K-50350
40,0 29,0 ~ 33,0 H3K-50400

6,0 8,0 1,0 ~ 3,0 H3K-60080
[+0,08/-0,15] 10,0 3,0 ~ 4,5 H3K-60100
12,0 4,5 ~ 6,0 H3K-60120
6,1 mm 14,0 6,0 ~ 8,5 H3K-60140 12,0 1,5
16,0 8,5 ~ 10,5 H3K-60160 [+0/- [+/- 3,60 31 3.900 2.500
18,0 10,5 ~ 12,0 H3K-60180 1,5] 0,40]
22,0 12,0 ~ 16,0 H3K-60220
26,0 16,0 ~ 20,0 H3K-60260
30,0 20,0 ~ 23,0 H3K-60300

6,4 10,0 1,0 ~ 3,5 H3K-64100
[+0,08/-0,15] 12,0 3,5 ~ 5,5 H3K-64120
15,0 5,5 ~ 8,5 H3K-64150 13,0 1,8
6,5 mm 18,0 8,5 ~ 11,5 H3K-64180 [+0/- [+/- 3,85 31 4.090 3.120
22,0 11,5 ~ 15,5 H3K-64220 1,5] 0,40]
26,0 15,5 ~ 19,0 H3K-64260
30,0 19,0 ~ 23,0 H3K-64300

16
 RIV-LINK BLIND RIVETS

RIV-LINK standard blind rivets

MATERIALS FINISH
aluminium
alloy polished
(AIMg 3,5)

carbon steel zinc plated

AIMg 3,5 / STEEL LARGE HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 6,0 1,5 ~ 3,0 H3KL095-32060

[+0,08/-0,10] 8,0 3,0 ~ 5,0 H3KL095-32080 9,5
10,0 5,0 ~ 7,0 H3KL095-32100 [+0/- 2,0 1,75 27 980 760
3,3 mm 12,0 7,0 ~ 9,0 H3KL095-32120 0,5]
14,0 9,0 ~ 11,0 H3KL095-32140

4,0 6,0 1,0 ~ 2,0 H3KL120-40060

[+0,08/-0,15] 8,0 2,0 ~ 4,0 H3KL120-40080 12,0
10,0 4,0 ~ 6,0 H3KL120-40100 [+0/- 2,5 2,10 27 1.600 1.200
4,1 mm 12,0 6,0 ~ 8,0 H3KL120-40120 0,5]
14,0 8,0 ~ 10,0 H3KL120-40140
16,0 10,0 ~ 12,0 H3KL120-40160

4,8 8,0 2,0 ~ 3,5 H3KL140-48080

[+0,08/-0,15] 10,0 3,5 ~ 5,5 H3KL140-48100
12,0 5,5 ~ 7,5 H3KL140-48120
4,9 mm 14,0 7,5 ~ 9,5 H3KL140-48140
16,0 9,0 ~ 11,0 H3KL140-48160 14,0
18,0 11,0 ~ 13,0 H3KL140-48180 [+0/- 2,5 2,70 27 2.230 1.690
20,0 13,0 ~ 15,0 H3KL140-48200 0,5]
22,0 15,0 ~ 17,0 H3KL140-48220
25,0 17,0 ~ 20,0 H3KL140-48250
28,0 20,0 ~ 23,0 H3KL140-48280
30,0 23,0 ~ 24,5 H3KL140-48300
35,0 24,5 ~ 29,0 H3KL140-48350

5,0 8,0 2,0 ~ 3,5 H3KL140-50080

[+0,08/-0,15] 10,0 3,5 ~ 5,5 H3KL140-50100
12,0 5,5 ~ 7,5 H3KL140-50120 14,0
5,1 mm 14,0 7,5 ~ 9,5 H3KL140-50140 [+0/- 2,5 2,70 27 2.500 2.000
16,0 9,0 ~ 11,0 H3KL140-50160 0,5]
18,0 11,0 ~ 13,0 H3KL140-50180

17
20,0 13,0 ~ 15,0 H3KL140-50200
 BLIND RIVETS RIV-LINK

RIV-LINK standard blind rivets

MATERIALS FINISH
aluminium
alloy polished
(AIMg 3,5)

carbon steel zinc plated

AIMg 3,5 / STEEL EXTRA LARGE HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

4,8 10,0 3,5 ~ 5,5 H3KL160-48100

[+0,08/-0,15] 12,0 5,5 ~ 7,5 H3KL160-48120
14,0 7,5 ~ 9,5 H3KL160-48140
4,9 mm 16,0 9,0 ~ 11,0 H3KL160-48160 16,0
18,0 11,0 ~ 13,0 H3KL160-48180 [+0/- 2,5 2,70 27 2.230 1.690
20,0 13,0 ~ 15,0 H3KL160-48200 0,5]
22,0 15,0 ~ 17,0 H3KL160-48220
25,0 17,0 ~ 20,0 H3KL160-48250
28,0 20,0 ~ 23,0 H3KL160-48280
30,0 23,0 ~ 24,5 H3KL160-48300

18
 RIV-LINK BLIND RIVETS

RIV-LINK standard blind rivets

MATERIALS FINISH
aluminium
alloy polished
(AIMg 2,5)

carbon steel zinc plated

AIMg 2,5 / STEEL COUNTERSUNK HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

2,4 6,0 0,0 ~ 3,5 H2K2-24060 5,0

[+0,08/-0,10] 8,0 3,5 ~ 5,5 H2K2-24080 [+0/- 1,0 1,45 27 353 315
10,0 5,5 ~ 7,5 H2K2-24100 0,4]
2,5 mm

3,0 6,0 0,0 ~ 3,5 H2K2-30060

[+0,08/-0,10] 8,0 3,5 ~ 5,5 H2K2-30080 6,0
10,0 5,5 ~ 7,5 H2K2-30100 [+0/- 1,0 1,75 27 810 620
3,1 mm 12,0 7,5 ~ 9,5 H2K2-30120 0,4]

3,2 6,0 0,0 ~ 3,0 H2K2-32060
[+0,08/-0,10] 8,0 3,0 ~ 5,0 H2K2-32080 6,0
10,0 5,0 ~ 7,0 H2K2-32100 [+0/- 1,0 1,75 27 980 760
3,3 mm 12,0 7,0 ~ 9,0 H2K2-32120 0,4]
14,0 9,0 ~ 11,0 H2K2-32140

19
 BLIND RIVETS RIV-LINK

RIV-LINK standard blind rivets

MATERIALS FINISH
aluminium
alloy polished
(AIMg 3,5)

carbon steel zinc plated

AIMg 3,5 / STEEL COUNTERSUNK HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

4,0 6,0 0,0 ~ 2,0 H3K2-40060

[+0,08/-0,15] 8,0 2,0 ~ 4,0 H3K2-40080 7,5
10,0 4,0 ~ 6,0 H3K2-40100 [+0/- 1,2 2,10 27 1.600 1.200
4,1 mm 12,0 6,0 ~ 8,0 H3K2-40120 0,5]
14,0 8,0 ~ 10,0 H3K2-40140
16,0 10,0 ~ 12,0 H3K2-40160

4,8 8,0 0,0 ~ 3,5 H3K2-48080
[+0,08/-0,15] 10,0 3,5 ~ 5,5 H3K2-48100
12,0 5,5 ~ 7,5 H3K2-48120
4,9 mm 14,0 7,5 ~ 9,5 H3K2-48140 9,0
16,0 9,0 ~ 11,0 H3K2-48160 [+0/- 1,5 2,70 27 2.230 1.690
18,0 11,0 ~ 13,0 H3K2-48180 0,5]
20,0 13,0 ~ 15,0 H3K2-48200
22,0 15,0 17,0 H3K2-48220
25,0 17,0 ~ 20,0 H3K2-48250

5,0 8,0 0,0 ~ 3,5 H3K2-50080
[+0,08/-0,15] 10,0 3,5 ~ 5,5 H3K2-50100
12,0 5,5 ~ 7,5 H3K2-50120 9,0
5,1 mm 14,0 7,5 ~ 9,5 H3K2-50140 [+0/- 1,5 2,70 27 2.500 2.000
16,0 9,0 ~ 11,0 H3K2-50160 0,5]
18,0 11,0 ~ 13,0 H3K2-50180
20,0 13,0 ~ 15,0 H3K2-50200
25,0 15,0 ~ 20,0 H3K2-50250

20
 RIV-LINK BLIND RIVETS

RIV-LINK standard blind rivets

MATERIALS FINISH

carbon steel zinc plated

carbon steel zinc plated

STEEL / STEEL DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,0 6,0 1,5 ~ 3,5 GK-30060

[+0,08/-0,10] 8,0 3,5 ~ 5,5 GK-30080 6,5 0,8
10,0 5,5 ~ 7,5 GK-30100 [+0/- [+/- 1,90 27 1.125 950
3,1 mm 12,0 7,5 ~ 9,5 GK-30120 0,7] 0,20]
14,0 9,0 ~ 11,0 GK-30140

3,2 6,0 1,5 ~ 3,0 GK-32060

[+0,08/-0,10] 8,0 3,0 ~ 5,0 GK-32080 6,5 0,8
10,0 5,0 ~ 7,0 GK-32100 [+0/- [+/- 2,00 27 1.285 1.100
3,3 mm 12,0 7,0 ~ 9,0 GK-32120 0,7] 0,20]
14,0 9,0 ~ 11,0 GK-32140
16,0 11,0 ~ 12,5 GK-32160

4,0 6,0 1,0 ~ 2,0 GK-40060

[+0,08/-0,15] 8,0 2,0 ~ 4,0 GK-40080
10,0 4,0 ~ 6,0 GK-40100 8,0 1,0
4,1 mm 12,0 6,0 ~ 8,0 GK-40120 [+0/- [+/- 2,50 27 2.200 1.700
14,0 8,0 ~ 10,0 GK-40140 1,0] 0,30]
16,0 10,0 ~ 12,0 GK-40160
18,0 12,0 ~ 14,0 GK-40180
20,0 14,0 ~ 15,5 GK-40200

4,8 6,0 1,0 ~ 2,0 GK-48060

[+0,08/-0,15] 8,0 2,0 ~ 3,5 GK-48080
10,0 3,5 ~ 5,5 GK-48100
4,9 mm 12,0 5,5 ~ 7,5 GK-48120
14,0 7,5 ~ 9,5 GK-48140 9,5 1,1
16,0 9,0 ~ 11,0 GK-48160 [+0/- [+/- 2,90 27 3.100 2.900
18,0 11,0 ~ 13,0 GK-48180 1,0] 0,30]
20,0 13,0 ~ 15,0 GK-48200
22,0 15,0 ~ 17,0 GK-48220
25,0 17,0 ~ 20,0 GK-48250

21
28,0 20,0 ~ 23,0 GK-48280
30,0 23,0 ~ 24,5 GK-48300
 BLIND RIVETS RIV-LINK

RIV-LINK standard blind rivets

MATERIALS FINISH

carbon steel zinc plated

carbon steel zinc plated

STEEL / STEEL DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

5,0 8,0 2,0 ~ 3,5 GK-50080

[+0,08/-0,15] 10,0 3,5 ~ 5,5 GK-50100
12,0 5,5 ~ 7,5 GK-50120 9,5 1,1
5,1 mm 14,0 7,5 ~ 9,5 GK-50140 [+0/- [+/- 2,90 27 4.000 3.100
16,0 9,0 ~ 11,0 GK-50160 1,0] 0,30]
18,0 11,0 ~ 13,0 GK-50180
20,0 13,0 ~ 15,0 GK-50200

6,0 12,0 4,5 ~ 6,0 GK-60120

[+0,08/-0,15] 14,0 6,0 ~ 8,5 GK-60140
16,0 8,5 ~ 10,5 GK-60160 12,0 1,5
6,1 mm 18,0 10,5 ~ 12,0 GK-60180 [+0/- [+/- 3,60 31 4.800 4.300
22,0 12,0 ~ 16,0 GK-60220 1,5] 0,40]
26,0 16,0 ~ 20,0 GK-60260
30,0 20,0 ~ 23,0 GK-60300

6,4 10,0 1,5 ~ 3,5 GK-64100

[+0,08/-0,15] 12,0 3,5 ~ 5,5 GK-64120
15,0 5,5 ~ 8,5 GK-64150 12,7 1,8
6,5 mm 18,0 8,5 ~ 11,5 GK-64180 [+0/- [+/- 3,85 31 5.700 4.900
22,0 11,5 ~ 15,5 GK-64220 0,35] 0,40]
26,0 15,5 ~ 19,0 GK-64260
30,0 19,0 ~ 23,0 GK-64300

22
 RIV-LINK BLIND RIVETS

RIV-LINK standard blind rivets

MATERIALS FINISH

carbon steel zinc plated

carbon steel zinc plated

STEEL / STEEL LARGE HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 8,0 3,5 ~ 5,5 GKL095-32080

[+0,08/-0,10] 10,0 5,5 ~ 7,5 GKL095-32100 9,5
12,0 7,5 ~ 9,5 GKL095-32120 [+0/- 2,0 2,00 27 1.285 1.100
3,3 mm 14,0 9,0 ~ 11,0 GKL095-32140 0,7]

4,0 8,0 2,0 ~ 4,0 GKL120-40080

[+0,08/-0,15] 10,0 4,0 ~ 6,0 GKL120-40100 12,0
12,0 6,0 ~ 8,0 GKL120-40120 [+0/- 2,5 2,50 27 2.200 1.700
4,1 mm 14,0 8,0 ~ 10,0 GKL120-40140 1,0]
16,0 10,0 ~ 12,0 GKL120-40160

4,8 10,0 3,5 ~ 5,5 GKL140-48100

[+0,08/-0,15] 12,0 5,5 ~ 7,5 GKL140-48120
14,0 7,5 ~ 9,5 GKL140-48140 14,0
4,9 mm 16,0 9,0 ~ 11,0 GKL140-48160 [+0/- 2,5 2,90 27 3.100 2.900
18,0 11,0 ~ 13,0 GKL140-48180 1,0]
20,0 13,0 ~ 15,0 GKL140-48200
22,0 15,0 ~ 17,0 GKL140-48220

23
 BLIND RIVETS RIV-LINK

RIV-LINK standard blind rivets

MATERIALS FINISH

carbon steel zinc plated

carbon steel zinc plated

STEEL / STEEL EXTRA LARGE HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

4,8 10,0 3,5 ~ 5,5 GKL160-48100

[+0,08/-0,15] 12,0 5,5 ~ 7,5 GKL160-48120
14,0 7,5 ~ 9,5 GKL160-48140 16,0
4,9 mm 16,0 9,0 ~ 11,0 GKL160-48160 [+0/- 2,5 2,90 27 3.100 2.900
18,0 11,0 ~ 13,0 GKL160-48180 1,0]
20,0 13,0 ~ 15,0 GKL160-48200
22,0 15,0 ~ 17,0 GKL160-48220

24
 RIV-LINK BLIND RIVETS

RIV-LINK standard blind rivets

MATERIALS FINISH

carbon steel zinc plated

carbon steel zinc plated

STEEL / STEEL COUNTERSUNK HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk dm p TENSILE SHEAR

+0,9/-0 min. ~ max. ≈ min. [N] [N]

3,0 6,0 0,0 ~ 3,5 GK2-30060 6,0

[+0,08/-0,10] 8,0 3,5 ~ 5,5 GK2-30080 [+0/- 1,90 27 1.125 950
10,0 5,5 ~ 7,5 GK2-30100 0,4]
3,1 mm 12,0 7,5 ~ 9,5 GK2-30120

3,2 6,0 1,5 ~ 3,0 GK2-32060

[+0,08/-0,10] 8,0 3,0 ~ 5,0 GK2-32080 6,0
10,0 5,0 ~ 7,0 GK2-32100 [+0/- 2,00 27 1.285 1.100
3,3 mm 12,0 7,0 ~ 9,0 GK2-32120 0,4]

4,0 6,0 0,0 ~ 2,0 GK2-40060

[+0,08/-0,10] 8,0 2,0 ~ 4,0 GK2-40080 7,5
10,0 4,0 ~ 6,0 GK2-40100 [+0/- 2,50 27 2.200 1.700
4,1 mm 12,0 6,0 ~ 8,0 GK2-40120 0,5]
14,0 8,0 ~ 10,0 GK2-40140
16,0 10,0 ~ 12,0 GK2-40160

4,8 8,0 2,0 ~ 3,5 GK2-48080

[+0,08/-0,15] 10,0 3,5 ~ 5,5 GK2-48100
12,0 5,5 ~ 7,5 GK2-48120 9,0
4,9 mm 14,0 7,5 ~ 9,5 GK2-48140 [+0/- 2,90 27 3.100 2.900
16,0 9,0 ~ 11,0 GK2-48160 0,5]
18,0 11,0 ~ 13,0 GK2-48180
20,0 13,0 ~ 15,0 GK2-48200

25
 BLIND RIVETS RIV-LINK

RIV-LINK standard blind rivets

MATERIALS FINISH

stainless steel polished

A2

stainless steel polished

A2

STAINLESS STEEL A2 / STAINLESS STEEL A2 DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,0 6,0 1,5 ~ 3,5 QBKS-30060

[+0,08/-0,10] 8,0 3,5 ~ 5,5 QBKS-30080 6,5 0,8
10,0 5,5 ~ 7,5 QBKS-30100 [+0/ [+/- 1,90 27 2.200 1.800
3,1 mm 12,0 7,5 ~ 9,5 QBKS-30120 -0,7] 0,20]

3,2 6,0 1,5 ~ 3,0 QBKS-32060

[+0,08/-0,10] 8,0 3,0 ~ 5,0 QBKS-32080 6,5 0,8
10,0 5,0 ~ 7,0 QBKS-32100 [+0/ [+/- 2,00 27 2.500 1.900
3,3 mm 12,0 7,0 ~ 9,0 QBKS-32120 -0,7] 0,20]
14,0 9,0 ~ 11,0 QBKS-32140
16,0 11,0 ~ 12,5 QBKS-32160

4,0 6,0 1,0 ~ 2,0 QBKS-40060

[+0,08/-0,15] 8,0 2,0 ~ 4,0 QBKS-40080
10,0 4,0 ~ 6,0 QBKS-40100 8,0 1,0
4,1 mm 12,0 6,0 ~ 8,0 QBKS-40120 [+0/ [+/- 2,50 27 3.800 3.100
14,0 8,0 ~ 10,0 QBKS-40140 -1,0] 0,30]
16,0 10,0 ~ 12,0 QBKS-40160
18,0 12,0 ~ 14,0 QBKS-40180
20,0 14,0 ~ 15,5 QBKS-40200

4,8 8,0 2,0 ~ 4,0 QBKS-48080

[+0,08/-0,15] 10,0 4,0 ~ 6,0 QBKS-48100
12,0 6,0 ~ 8,0 QBKS-48120
4,9 mm 14,0 8,0 ~ 9,5 QBKS-48140 9,5 1,1
16,0 9,5 ~ 11,0 QBKS-48160 [+0/ [+/- 2,90 27 6.000 4.500
18,0 11,0 ~ 13,0 QBKS-48180 -1,0] 0,30]
20,0 13,0 ~ 15,0 QBKS-48200
22,0 15,0 ~ 17,0 QBKS-48220
25,0 17,0 ~ 20,0 QBKS-48250

26
 RIV-LINK BLIND RIVETS

RIV-LINK standard blind rivets

MATERIALS FINISH

stainless steel polished

A2

stainless steel polished

A2

STAINLESS STEEL A2 / STAINLESS STEEL A2 DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

5,0 8,0 2,0 ~ 3,5 QBKS-50080

[+0,08/-0,15] 10,0 3,5 ~ 5,5 QBKS-50100 9,5 1,1
12,0 5,5 ~ 7,5 QBKS-50120 [+0/- [+/- 2,90 27 6.500 5.000
5,1 mm 14,0 7,5 ~ 9,5 QBKS-50140 1,0] 0,30]
16,0 9,0 ~ 11,0 QBKS-50160

6,0 12,0 4,5 ~ 6,0 QBKS-60120

[+0,08/-0,15] 14,0 6,0 ~ 8,5 QBKS-60140 12,0 1,5
16,0 8,5 ~ 10,5 QBKS-60160 [+0/- [+/- 3,60 31 8.830 6.500
6,1 mm 18,0 10,5 ~ 12,0 QBKS-60180 0,35] 0,40]
22,0 12,0 ~ 16,0 QBKS-60220

6,4 12,0 3,5 ~ 5,5 QBKS-64120

[+0,08/-0,15] 15,0 5,5 ~ 8,5 QBKS-64150 12,7 2,1
18,0 8,5 ~ 11,5 QBKS-64180 [+0/- [+/- 3,85 31 8.850 6.500
6,5 mm 22,0 11,5 ~ 15,5 QBKS-64220 0,35] 0,40]
25,0 15,5 ~ 18,0 QBKS-64250

27
 BLIND RIVETS RIV-LINK

RIV-LINK standard blind rivets

MATERIALS FINISH

stainless steel polished

A2

stainless steel polished

A2

STAINLESS STEEL A2 / STAINLESS STEEL A2

LARGE HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 6,0 1,5 ~ 3,0 QBKSL095-32060

[+0,08/-0,10] 8,0 3,0 ~ 5,0 QBKSL095-32080 9,5
10,0 5,0 ~ 7,0 QBKSL095-32100 [+0/- 2,0 2,0 27 2.500 1.900
3,3 mm 12,0 7,0 ~ 9,0 QBKSL095-32120 0,7]
14,0 9,0 ~ 11,0 QBKSL095-32140

4,0 6,0 1,0 ~ 2,0 QBKSL120-40060

[+0,08/-0,15] 8,0 2,0 ~ 4,0 QBKSL120-40080 12,0
10,0 4,0 ~ 6,0 QBKSL120-40100 [+0/- 2,5 2,5 27 3.800 3.100
4,1 mm 12,0 6,0 ~ 8,0 QBKSL120-40120 1,0]
14,0 8,0 ~ 10,0 QBKSL120-40140
16,0 10,0 ~ 12,0 QBKSL120-40160

4,8 8,0 2,0 ~ 4,0 QBKSL140-48080

[+0,08/-0,15] 10,0 4,0 ~ 6,0 QBKSL140-48100
12,0 6,0 ~ 8,0 QBKSL140-48120
4,9 mm 14,0 8,0 ~ 9,5 QBKSL140-48140 14,0
16,0 9,5 ~ 11,0 QBKSL140-48160 [+0/- 2,5 2,9 27 6.000 4.500
18,0 11,0 ~ 13,0 QBKSL140-48180 1,0]
20,0 13,0 ~ 15,0 QBKSL140-48200
22,0 15,0 ~ 17,0 QBKSL140-48220
25,0 17,0 ~ 20,0 QBKSL140-48250

28
 RIV-LINK BLIND RIVETS

RIV-LINK standard blind rivets

MATERIALS FINISH

stainless steel polished

A2

stainless steel polished

A2

STAINLESS STEEL A2 / STAINLESS STEEL A2

EXTRA LARGE HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

4,8 8,0 2,0 ~ 4,0 QBKSL160-48080

[+0,08/-0,15] 10,0 4,0 ~ 6,0 QBKSL160-48100
10,5 4,0 ~ 6,5 QBKSL160-48105
4,9 mm 12,0 6,0 ~ 8,0 QBKSL160-48120
13,5 6,5 ~ 8,5 QBKSL160-48135
14,0 8,0 ~ 9,5 QBKSL160-48140 16,0
16,0 9,5 ~ 11,0 QBKSL160-48160 [+0/- 2,5 2,9 27 6.000 4.500
17,2 10,5 ~ 12,5 QBKSL160-48172 1,0]
18,0 11,0 ~ 13,0 QBKSL160-48180
20,0 13,0 ~ 15,0 QBKSL160-48200
20,5 13,5 ~ 16,5 QBKSL160-48205
22,0 15,0 ~ 17,0 QBKSL160-48220
23,5 16,5 ~ 18,5 QBKSL160-48235
25,0 17,0 ~ 20,0 QBKSL160-48250

29
 BLIND RIVETS RIV-LINK

RIV-LINK standard blind rivets

MATERIALS FINISH

stainless steel polished

A2

stainless steel polished

A2

STAINLESS STEEL A2 / STAINLESS STEEL A2

COUNTERSUNK HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk dm p TENSILE SHEAR

+0,9/-0 min. ~ max. ≈ min. [N] [N]

3,2 6,0 0,0 ~ 3,0 QBKS2-32060 6,0

[+0,08/-0,10] 8,0 3,0 ~ 5,0 QBKS2-32080 [+0/- 2,00 27 2.500 1.900
10,0 5,0 ~ 7,0 QBKS2-32100 0,4]
3,3 mm 12,0 7,0 ~ 9,0 QBKS2-32120

4,0 6,0 0,0 ~ 2,0 QBKS2-40060

[+0,08/-0,15] 8,0 2,0 ~ 4,0 QBKS2-40080
10,0 4,0 ~ 6,0 QBKS2-40100 7,5
4,1 mm 12,0 6,0 ~ 8,0 QBKS2-40120 [+0/- 2,50 27 3.800 3.100
14,0 8,0 ~ 10,0 QBKS2-40140 0,5]
16,0 10,0 ~ 12,0 QBKS2-40160
18,0 12,0 ~ 14,0 QBKS2-40180

4,8 8,0 0,0 ~ 3,5 QBKS2-48080

[+0,08/-0,15] 10,0 3,5 ~ 5,5 QBKS2-48100
12,0 5,5 ~ 7,5 QBKS2-48120 9,0
4,9 mm 14,0 7,5 ~ 9,5 QBKS2-48140 [+0/- 2,90 27 6.000 4.500
16,0 9,0 ~ 11,0 QBKS2-48160 0.5]
18,0 11,0 ~ 13,0 QBKS2-48180
20,0 13,0 ~ 15,0 QBKS2-48200

30
 RIV-LINK BLIND RIVETS

RIV-LINK standard blind rivets

MATERIALS FINISH

stainless steel polished

A4

stainless steel polished

A4

STAINLESS STEEL A4 / STAINLESS STEEL A4 DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,0 6,0 1,5 ~ 3,5 QBKWS-30060 6,5 0,8

[+0,08/-0,10] 8,0 3,5 ~ 5,5 QBKWS-30080 [+0/- [+/- 1,90 27 2.200 1.800
10,0 5,5 ~ 7,5 QBKWS-30100 0,7] 0,20]
3,1 mm

3,2 6,0 1,5 ~ 3,0 QBKWS-32060

[+0,08/-0,10] 8,0 3,0 ~ 5,0 QBKWS-32080 6,5 0,8
10,0 5,0 ~ 7,0 QBKWS-32100 [+0/- [+/- 2,00 27 2.500 1.900
3,3 mm 12,0 7,0 ~ 9,0 QBKWS-32120 0,7] 0,20]

4,0 6,0 1,0 ~ 2,0 QBKWS-40060

[+0,08/-0,15] 8,0 2,0 ~ 4,0 QBKWS-40080 8,0 1,0
10,0 4,0 ~ 6,0 QBKWS-40100 [+0/- [+/- 2,50 27 3.800 3.100
4,1 mm 12,0 6,0 ~ 8,0 QBKWS-40120 1,0] 0,30]
14,0 8,0 ~ 10,0 QBKWS-40140
16,0 10,0 ~ 12,0 QBKWS-40160

4,8 8,0 2,0 ~ 3,5 QBKWS-48080

[+0,08/-0,15] 10,0 3,5 ~ 5,5 QBKWS-48100
12,0 5,5 ~ 7,5 QBKWS-48120 9,5 1,1
4,9 mm 14,0 7,5 ~ 9,5 QBKWS-48140 [+0/- [+/- 2,90 27 6.000 4.500
16,0 9,0 ~ 11,0 QBKWS-48160 1,0] 0,30]
18,0 11,0 ~ 13,0 QBKWS-48180
20,0 13,0 ~ 15,0 QBKWS-48200
22,0 15,0 ~ 17,0 QBKWS-48220

31
 BLIND RIVETS RIV-LINK

RIV-LINK standard blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 5,0]

stainless steel polished

A2

AIMg 5,0 / STAINLESS STEEL A2 DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,0 6,0 1,5 ~ 3,5 HBKS-30060 6,5 0,8

[+0,08/-0,10] 8,0 3,5 ~ 5,5 HBKS-30080 [+0/- [+/- 1,75 27 810 620
10,0 5,5 ~ 7,5 HBKS-30100 0,7] 0,20]
3,1 mm 12,0 7,5 ~ 9,5 HBKS-30120

3,2 6,0 1,5 ~ 3,0 HBKS-32060

[+0,08/-0,10] 8,0 3,0 ~ 5,0 HBKS-32080 6,5 0,8
10,0 5,0 ~ 7,0 HBKS-32100 [+0/- [+/- 1,75 27 980 760
3,3 mm 12,0 7,0 ~ 9,0 HBKS-32120 0,7] 0,20]

4,0 6,0 1,0 ~ 2,0 HBKS-40060

[+0,08/-0,15] 8,0 2,0 ~ 4,0 HBKS-40080 8,0 1,0
10,0 4,0 ~ 6,0 HBKS-40100 [+0/- [+/- 2,10 27 1.600 1.200
4,1 mm 12,0 6,0 ~ 8,0 HBKS-40120 1,0] 0,30]

4,8 8,0 2,0 ~ 3,5 HBKS-48080

[+0,08/-0,15] 10,0 3,5 ~ 5,5 HBKS-48100
12,0 5,5 ~ 7,5 HBKS-48120 9,5 1,1
4,9 mm 14,0 7,5 ~ 9,5 HBKS-48140 [+0/- [+/- 2,70 27 2.230 1.690
16,0 9,0 ~ 11,0 HBKS-48160 1,0] 0,30]
18,0 11,0 ~ 13,0 HBKS-48180
20,0 13,0 ~ 15,0 HBKS-48200

5,0 8,0 2,0 ~ 3,5 HBKS-50080

[+0,08/-0,15] 10,0 3,5 ~ 5,5 HBKS-50100
12,0 5,5 ~ 7,5 HBKS-50120 9,5 1,1
5,1 mm 14,0 7,5 ~ 9,5 HBKS-50140 [+0/- [+/- 2,70 27 2.500 2.000
16,0 9,0 ~ 11,0 HBKS-50160 1,0] 0,30]
18,0 11,0 ~ 13,0 HBKS-50180
20,0 13,0 ~ 15,0 HBKS-50200

32
PLEASE NOTE: Large and extra large head available on request. For more information, please contact
our sales office at [email protected]
 RIV-LINK BLIND RIVETS

RIV-LINK standard blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 5,0]

stainless steel polished

A2

AIMg 5,0 / STAINLESS STEEL A2

COUNTERSUNK HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 6,0 0,0 ~ 3,0 HBKS2-32060 6,0

[+0,08/-0,10] 8,0 3,0 ~ 5,0 HBKS2-32080 [+0/- 1,0 1,75 27 980 760
10,0 5,0 ~ 7,0 HBKS2-32100 0,4]
3,3 mm 12,0 7,0 ~ 9,0 HBKS2-32120

4,0 6,0 0,0 ~ 2,0 HBKS2-40060
[+0,08/-0,10] 8,0 2,0 ~ 4,0 HBKS2-40080 7,5
10,0 4,0 ~ 6,0 HBKS2-40100 [+0/- 1,2 2,10 27 1.600 1.200
4,1 mm 12,0 6,0 ~ 8,0 HBKS2-40120 0,5]

4,8 8,0 0,0 ~ 3,5 HBKS2-48080

[+0,08/-0,15] 10,0 3,5 ~ 5,5 HBKS2-48100
12,0 5,5 ~ 7,5 HBKS2-48120 9,0
4,9 mm 14,0 7,5 ~ 9,5 HBKS2-48140 [+0/- 1,2 2,70 27 2.230 1.690
16,0 9,0 ~ 11,0 HBKS2-48160 0,5]
18,0 11,0 ~ 13,0 HBKS2-48180
20,0 13,0 ~ 15,0 HBKS2-48200

33
 BLIND RIVETS RIV-LINK

RIV-LINK standard blind rivets

MATERIALS FINISH

copper alloy polished

carbon steel zinc plated

COPPER / STEEL DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,0 6,0 1,5 ~ 3,5 CGK-30060 6,5 0,8

[+0,08/-0,10] 8,0 3,5 ~ 5,5 CGK-30080 [+0/- [+/- 1,95 27 700 600
10,0 5,5 ~ 7,5 CGK-30100 0,7] 0,20]
3,1 mm 12,0 7,5 ~ 9,5 CGK-30120

3,2 6,0 1,5 ~ 3,0 CGK-32060
[+0,08/-0,10] 8,0 3,0 ~ 5,0 CGK-32080 6,5 0,8
10,0 5,0 ~ 7,0 CGK-32100 [+0/- [+/- 1,95 27 800 700
3,3 mm 12,0 7,0 ~ 9,0 CGK-32120 0,7] 0,20]

4,0 6,0 1,0 ~ 2,0 CGK-40060
[+0,08/-0,15] 8,0 2,0 ~ 4,0 CGK-40080
10,0 4,0 ~ 6,0 CGK-40100 8,0 1,0
4,1 mm 12,0 6,0 ~ 8,0 CGK-40120 [+0/- [+/- 2,10 27 1.500 1.000
14,0 8,0 10,0 CGK-40140 1,0] 0,30]
16,0 10,0 ~ 12,0 CGK-40160

4,8 8,0 2,0 ~ 3,5 CGK-48080
[+0,08/-0,15] 10,0 3,5 ~ 5,5 CGK-48100 9,5 1,1
12,0 5,5 ~ 7,5 CGK-48120 [+0/- [+/- 2,70 27 2.000 1.500
4,9 mm 14,0 7,5 ~ 9,5 CGK-48140 1,0] 0,30]
16,0 9,0 ~ 11,0 CGK-48160

34
 RIV-LINK BLIND RIVETS

RIV-LINK standard blind rivets

MATERIALS FINISH

copper alloy polished

bronze polished

COPPER / BRONZE DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,0 6,0 1,5 ~ 3,5 CRK-30060 6,5 0,8

[+0,08/-0,10] 8,0 3,5 ~ 5,5 CRK-30080 [+0/- [+/- 1,95 27 700 600
10,0 5,5 ~ 7,5 CRK-30100 0,7] 0,20]
3,1 mm 12,0 7,5 ~ 9,5 CRK-30120

3,2 6,0 1,5 ~ 3,0 CRK-32060
[+0,08/-0,10] 8,0 3,0 ~ 5,0 CRK-32080 6,5 0,8
10,0 5,0 ~ 7,0 CRK-32100 [+0/- [+/- 1,95 27 800 700
3,3 mm 12,0 7,0 ~ 9,0 CRK-32120 0,7] 0,20]

4,0 6,0 1,0 ~ 2,0 CRK-40060
[+0,08/-0,15] 8,0 2,0 ~ 4,0 CRK-40080
10,0 4,0 ~ 6,0 CRK-40100 8,0 1,0
4,1 mm 12,0 6,0 ~ 8,0 CRK-40120 [+0/- [+/- 2,10 27 1.500 1.000
14,0 8,0 ~ 10,0 CRK-40140 1,0] 0,30]
16,0 10,0 ~ 12,0 CRK-40160

4,8 8,0 2,0 ~ 3,5 CRK-48080
[+0,08/-0,15] 10,0 3,5 ~ 5,5 CRK-48100 9,5 1,1
12,0 5,5 ~ 7,5 CRK-48120 [+0/- [+/- 2,70 27 2.000 1.500
4,9 mm 14,0 7,5 ~ 9,5 CRK-48140 1,0] 0,30]
16,0 9,0 ~ 11,0 CRK-48160

35
 BLIND RIVETS RIV-LINK

RIV-LINK standard blind rivets

MATERIALS FINISH

aluminium polished
alloy

aluminium polished
alloy

ALUMINIUM ALLOY / ALUMINIUM ALLOY DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 6,0 1,5 ~ 3,0 HLK-32060

[+0,08/-0,10] 8,0 3,0 ~ 5,0 HLK-32080 6,5 0,8
10,0 5,0 ~ 7,0 HLK-32100 [+0/- [+/- 1,95 27 670 535
3,3 mm 12,0 7,0 ~ 9,0 HLK-32120 0,7] 0,20]
14,0 9,0 ~ 11,0 HLK-32140
16,0 11,0 ~ 12,5 HLK-32160

4,0 6,0 1,0 ~ 2,0 HLK-40060

[+0,08/-0,15] 8,0 2,0 ~ 4,0 HLK-40080
10,0 4,0 ~ 6,0 HLK-40100 8,0 1,0
4,1 mm 12,0 6,0 ~ 8,0 HLK-40120 [+0/- [+/- 2,45 27 1.025 845
14,0 8,0 ~ 10,0 HLK-40140 1,0] 0,30]
16,0 10,0 ~ 12,0 HLK-40160

4,8 8,0 2,0 ~ 3,5 HLK-48080

[+0,08/-0,15] 10,0 3,5 ~ 5,5 HLK-48100
12,0 5,5 ~ 7,5 HLK-48120
4,9 mm 14,0 7,5 ~ 9,5 HLK-48140 9,5 1,1
16,0 9,0 ~ 11,0 HLK-48160 [+0/- [+/- 2,90 27 1.425 1.155
18,0 11,0 ~ 13,0 HLK-48180 1,0] 0,30]
20,0 13,0 ~ 15,0 HLK-48200
22,0 15,0 ~ 17,0 HLK-48220
25,0 17,0 ~ 20,0 HLK-48250

PLEASE NOTE: Countersunk head available on request. For more information, please contact our
sales office at [email protected]

36
 CHARACTERISTICS & APPLICATIONS

1.2 SEAL-LINK
CHARACTERISTICS
The seal-link rivet is fully waterproof due to the fact that the rivet body is
completely closed.

Waterproof up to a pressure of 3,500 kPa if the rivet is processed with the

correct nosepiece mounted on the tool and if the blind rivet is placed in a
drill hole that is 0,1 mm wider than the diameter of the rivet body.

After the rivet is placed, the mandrel head is securely locked into the rivet
body and is vibration-resistant.

APPLICATIONS
Gas- and waterproof blind rivets are used in applications where the
intrusion of damp and water is undesirable (e.g. coach work) and to prevent
loss of pressure (in air ducts), and in environments where the broken
mandrel head cannot be allowed to linger (e.g. electronics applications).

Air ducts
Coach work
Gables
Washing machines
Refrigerators
etc.

37
 BLIND RIVETS SEAL-LINK

SEAL-LINK blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 5,0]

carbon steel phosphated

AIMg 5,0 / STEEL DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 6,5 0,5 ~ 2,0 HF-32065

[+/-0,08] 8,0 2,0 ~ 3,5 HF-32080 6,0
9,5 3,5 ~ 5,0 HF-32095 [+/- 1,40 1,70 27 1.250 1.070
3,3 mm 10,7 5,0 ~ 6,5 HF-32107 0,24]
12,5 6,5 ~ 8,0 HF-32125

4,0 8,0 1,0 ~ 3,5 HF-40080

[+/-0,08] 9,5 3,5 ~ 4,5 HF-40095 8,0
11,0 4,5 ~ 6,5 HF-40110 [+/- 1,70 2,20 27 2.240 1.700
4,1 mm 12,5 6,5 ~ 8,0 HF-40125 0,29]
15,0 8,0 ~ 10,5 HF-40150

4,8 8,0 1,0 ~ 3,0 HF-48080

[+/-0,08] 9,5 3,0 ~ 4,5 HF-48095
11,0 4,5 ~ 6,0 HF-48110
4,9 mm 12,5 6,0 ~ 7,5 HF-48125 9,0
14,0 7,5 ~ 9,0 HF-48140 [+/- 2,00 2,63 27 3.100 2.200
16,0 9,0 ~ 11,0 HF-48160 0,29]
18,0 11,0 ~ 13,0 HF-48180
21,0 13,0 ~ 16,0 HF-48210
25,0 16,0 ~ 20,0 HF-48250

6,4 12,5 4,0 ~ 6,0 HF-64125 12,7

[+/-0,11] 16,0 6,0 ~ 8,0 HF-64160 [+/- 2,50 3,70 31 4.900 3.950
0,35]
6,5 mm

38
 SEAL-LINK BLIND RIVETS

SEAL-LINK blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 5,0]

carbon steel phosphated

AIMg 5,0 / STEEL COUNTERSUNK HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 7,5 1,5 ~ 3,5 HF2-32075 6,0

[+/-0,08] 9,0 3,5 ~ 4,5 HF2-32090 [+0/- 1,0 1,70 27 1.250 1.070
10,5 4,5 ~ 6,5 HF2-32105 0,4]
3,3 mm

4,0 9,5 2,0 ~ 5,0 HF2-40095 7,5

[+/-0,08] 11,0 5,0 ~ 6,5 HF2-40110 [+0/- 1,0 2,20 27 2.240 1.700
12,5 6,0 ~ 8,0 HF2-40125 0,5]
4,1 mm

4,8 9,5 2,5 ~ 4,5 HF2-48095

[+/-0,08] 11,0 4,5 ~ 6,0 HF2-48110
12,5 6,0 ~ 7,5 HF2-48125 9,0
4,9 mm 14,0 7,5 ~ 9,0 HF2-48140 [+0/- 1,2 2,63 27 3.100 2.200
15,5 9,0 ~ 10,5 HF2-48155 0,5]
17,0 10,5 ~ 12,0 HF2-48170
19,0 12,0 ~ 14,0 HF2-48190

39
 BLIND RIVETS SEAL-LINK

SEAL-LINK blind rivets

MATERIALS FINISH

carbon steel zinc plated

carbon steel zinc plated

STEEL / STEEL DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 6,0 0,5 ~ 1,5 GF-32060 6,0 1,0

[+0,08/-0,10] 8,0 1,5 ~ 3,0 GF-32080 [+/- [+/- 1,90 27 2.200 1.600
9,5 3,0 ~ 5,0 GF-32095 0,24] 0,30]
3,3 mm 12,0 5,0 ~ 6,5 GF-32120

4,0 6,0 0,5 ~ 1,5 GF-40060

[+0,08/-0,10] 8,0 1,5 ~ 3,0 GF-40080 8,0 1,4
10,0 3,0 ~ 5,0 GF-40100 [+/- [+/- 2,30 27 2.500 2.300
4,1 mm 12,0 5,0 ~ 6,5 GF-40120 0,29] 0,30]
15,0 6,5 ~ 10,5 GF-40150

4,8 8,0 1,0 ~ 3,0 GF-48080

[+0,08/-0,10] 9,5 3,0 ~ 4,5 GF-48095 9,5 1,7
12,0 4,5 ~ 6,0 GF-48120 [+/- [+/- 2,90 27 3.800 2.900
4,9 mm 16,0 6,0 ~ 10,5 GF-48160 0,29] 0,30]

40
 SEAL-LINK BLIND RIVETS

SEAL-LINK blind rivets

MATERIALS FINISH

carbon steel zinc plated

carbon steel zinc plated

STEEL / STEEL LARGE HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 6,0 0,5 ~ 1,5 GFL100-32060 10,0 1,0

[+0,08/-0,10] 8,0 1,5 ~ 3,0 GFL100-32080 [+/- [+/- 1,90 27 1.700 1.900
9,5 3,0 ~ 5,0 GFL100-32095 0,29] 0,30]
3,3 mm 12,0 5,0 ~ 6,5 GFL100-32120

4,0 6,0 0,5 ~ 1,5 GFL120-40060

[+0,08/-0,10] 8,0 1,5 ~ 3,0 GFL120-40080 12,0 1,2
10,0 3,0 ~ 5,0 GFL120-40100 [+/- [+/- 2,30 27 2.500 2.300
4,1 mm 12,0 5,0 ~ 6,5 GFL120-40120 0,35] 0,30]
15,0 6,5 ~ 10,5 GFL120-40150

4,8 8,0 1,0 ~ 3,0 GFL140-48080 14,0 1,4

[+0,08/-0,10] 9,5 3,0 ~ 4,5 GFL140-48095 [+/- [+/- 2,90 27 3.800 2.900
12,0 4,5 ~ 6,0 GFL140-48120 0,35] 0,30]
4,9 mm 16,0 6,0 ~ 10,5 GFL140-48160

41
 BLIND RIVETS SEAL-LINK

SEAL-LINK blind rivets

MATERIALS FINISH

stainless steel polished

A2

stainless steel polished

A1

STAINLESS STEEL A2 / STAINLESS STEEL A1 DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 6,0 0,5 ~ 1,5 QBFS-32060 6,0 0,90

[+0,08/-0,10] 8,0 1,5 ~ 3,0 QBFS-32080 [+/- [+/- 1,90 27 2.500 2.000
9,5 3,0 ~ 5,0 QBFS-32095 0,24] 0,3]
3,3 mm 12,0 5,0 ~ 7,0 QBFS-32120

4,0 6,0 0,5 ~ 1,5 QBFS-40060

[+0,08/-0,10] 8,0 1,5 ~ 3,0 QBFS-40080 8,0 1,30
10,0 3,0 ~ 5,0 QBFS-40100 [+/- [+/- 2,30 27 4.000 3.000
4,1 mm 12,0 5,0 ~ 6,5 QBFS-40120 0,29] 0,3]
15,0 6,5 ~ 10,5 QBFS-40150

4,8 8,0 1,0 ~ 3,0 QBFS-48080

[+0,08/-0,10] 9,5 3,0 ~ 4,5 QBFS-48095 9,5 1,60
12,0 4,5 ~ 6,0 QBFS-48120 [+/- [+/- 2,90 27 5.500 4.500
4,9 mm 16,0 6,0 ~ 10,5 QBFS-48160 0,29] 0,3]
20,0 10,5 ~ 14,0 QBFS-48200

42
 SEAL-LINK BLIND RIVETS

SEAL-LINK blind rivets

MATERIALS FINISH

stainless steel polished

A2

stainless steel polished

A1

STAINLESS STEEL A2 / STAINLESS STEEL A1 LARGE HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 6,0 0,5 ~ 1,5 QBFSL100-32060 10,0 0,9

[+0,08/-0,10] 8,0 1,5 ~ 3,0 QBFSL100-32080 [+/- [+/- 1,90 27 2.500 2.000
9,5 3,0 ~ 5,0 QBFSL100-32095 0,29] 0,30]
3,3 mm 12,0 5,0 ~ 7,0 QBFSL100-32120

4,0 6,0 0,5 ~ 1,5 QBFSL120-40060

[+0,08/-0,10] 8,0 1,5 ~ 3,0 QBFSL120-40080 12,0 1,1
10,0 3,0 ~ 5,0 QBFSL120-40100 [+/- [+/- 2,30 27 4.000 3.000
4,1 mm 12,0 5,0 ~ 6,5 QBFSL120-40120 0,35] 0,30]
15,0 6,5 ~ 10,5 QBFSL120-40150

4,8 8,0 1,0 ~ 3,0 QBFSL140-48080

[+0,08/-0,10] 9,5 3,0 ~ 4,5 QBFSL140-48095 14,0 1,3
12,0 4,5 ~ 6,0 QBFSL140-48120 [+/- [+/- 2,90 27 5.500 4.500
4,9 mm 16,0 6,0 ~ 10,5 QBFSL140-48160 0,35] 0,30]
20,0 10,5 ~ 14,0 QBFSL140-48200

43
 BLIND RIVETS SEAL-LINK

SEAL-LINK blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 5,0]

stainless steel polished

A2

AIMg 5,0 / STAINLESS STEEL A2 DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 6,5 0,5 ~ 2,0 HBF-32065

[+/-0,08] 8,0 2,0 ~ 3,5 HBF-32080 6,0
9,5 3,5 ~ 5,0 HBF-32095 [+/- 1,40 1,70 27 1.250 1.070
3,3 mm 10,7 5,0 ~ 6,5 HBF-32107 0,24]
12,5 6,5 ~ 8,0 HBF-32125

4,0 8,0 1,0 ~ 3,5 HBF-40080

[+/-0,08] 9,5 3,5 ~ 4,5 HBF-40095 8,0
11,0 4,5 ~ 6,5 HBF-40110 [+/- 1,70 2,20 27 2.240 1.700
4,1 mm 12,5 6,5 ~ 8,0 HBF-40125 0,29]
15,0 8,0 ~ 10,5 HBF-40150

4,8 8,0 1,0 ~ 3,0 HBF-48080

[+/-0,08] 9,5 3,0 ~ 4,5 HBF-48095
11,0 4,5 ~ 6,0 HBF-48110
4,9 mm 12,5 6,0 ~ 7,5 HBF-48125 9,0
14,0 7,5 ~ 9,0 HBF-48140 [+/- 2,00 2,63 27 3.100 2.200
16,0 9,0 ~ 11,0 HBF-48160 0,29]
18,0 11,0 ~ 13,0 HBF-48180
21,0 13,0 ~ 16,0 HBF-48210
25,0 16,0 ~ 20,0 HBF-48250

44
 SEAL-LINK BLIND RIVETS

SEAL-LINK blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 5,0]

stainless steel polished

A2

AIMg 5,0 / STAINLESS STEEL A2 COUNTERSUNK HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 7,5 1,5 ~ 3,5 HBF2-32075 6,0

[+/-0,08] 9,0 3,5 ~ 4,5 HBF2-32090 [+0/- 1,0 1,70 27 1.250 1.070
10,5 4,5 ~ 6,5 HBF2-32105 0,4]
3,3 mm

4,0 9,5 2,0 ~ 5,0 HBF2-40095 7,5

[+/-0,08] 11,0 5,0 ~ 6,5 HBF2-40110 [+0/- 1,0 2,20 27 2.240 1.700
12,5 6,0 ~ 8,0 HBF2-40125 0,5]
4,1 mm

4,8 9,5 2,5 ~ 4,5 HBF2-48095

[+/-0,08] 11,0 4,5 ~ 6,0 HBF2-48110
12,5 6,0 ~ 7,5 HBF2-48125 9,0
4,9 mm 14,0 7,5 ~ 9,0 HBF2-48140 [+0/- 1,2 2,65 27 3.100 2.200
15,5 9,0 ~ 10,5 HBF2-48155 0,5]
17,0 10,5 ~ 12,0 HBF2-48170
19,0 12,0 ~ 14,0 HBF2-48190

45
 BLIND RIVETS SEAL-LINK

SEAL-LINK blind rivets

MATERIALS FINISH

aluminium polished
alloy

aluminium polished
alloy

ALUMINIUM ALLOY / ALUMINIUM ALLOY DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 6,5 0,5 ~ 2,0 QLF-32065

[+/-0,08] 8,0 2,0 ~ 3,5 QLF-32080 6,0
9,5 3,5 ~ 5,0 QLF-32095 [+/- 1,40 1,70 27 490 450
3,3 mm 10,7 5,0 ~ 6,5 QLF-32107 0,24]
12,7 6,5 ~ 8,0 QLF-32127

4,0 8,0 1,0 ~ 3,5 QLF-40080

[+/-0,08] 9,5 3,5 ~ 4,5 QLF-40095 8,0
11,0 4,5 ~ 6,5 QLF-40110 [+/- 1,70 2,20 27 820 580
4,1 mm 12,7 6,5 ~ 8,0 QLF-40127 0,29]
15,0 8,0 ~ 10,5 QLF-40150

4,8 8,0 1,0 ~ 3,0 QLF-48080

[+/-0,08] 9,5 3,0 ~ 4,5 QLF-48095
11,0 4,5 ~ 6,0 QLF-48110 9,5
4,9 mm 12,5 6,0 ~ 7,5 QLF-48125 [+/- 2,00 2,65 27 1.120 900
14,0 7,5 ~ 9,0 QLF-48140 0,29]
16,0 9,0 ~ 11,0 QLF-48160
18,0 11,0 ~ 13,0 QLF-48180
21,0 13,0 ~ 16,0 QLF-48210
25,0 16,0 ~ 20,0 QLF-48250

46
 SEAL-LINK BLIND RIVETS

SEAL-LINK blind rivets

MATERIALS FINISH

aluminium polished
alloy

aluminium polished
alloy

ALUMINIUM ALLOY / ALUMINIUM ALLOY

COUNTERSUNK HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 7,5 1,5 ~ 3,5 QLF2-32075 6,0

[+/-0,08] 9,0 3,5 ~ 4,5 QLF2-32090 [+0/- 1,4 1,70 27 490 450
10,5 4,5 ~ 6,5 QLF2-32105 0,4]
3,3 mm

4,0 9,5 2,0 ~ 5,0 QLF2-40095 7,5

[+/-0,08] 11,0 5,0 ~ 6,5 QLF2-40110 [+0/- 1,7 2,20 27 820 580
12,5 6,0 ~ 8,0 QLF2-40125 0,5]
4,1 mm

4,8 9,5 2,5 ~ 4,5 QLF2-48095

[+/-0,08] 11,0 4,5 ~ 6,0 QLF2-48110
12,5 6,0 ~ 7,5 QLF2-48125 9,0
4,9 mm 14,0 7,5 ~ 9,0 QLF2-48140 [+0/- 2,0 2,65 27 1.120 900
15,5 9,0 ~ 10,5 QLF2-48155 0,5]
17,0 10,5 ~ 12,0 QLF2-48170
19,0 12,0 ~ 14,0 QLF2-48190

47
 strong double bulbs!

48
 CHARACTERISTICS & APPLICATIONS

1.3 MULTI-LINK
CHARACTERISTICS

The multi-link rivet was developed to provide large grip ranges. Each multi-link
rivet has a larger grip range than traditional blind rivets.

The rivet forms a large bulb on the back side when the mandrel is pulled out,
giving it a larger surface and thus creating a stronger link.

Thanks to its typical shape, the mandrel head is locked into the body, creating a
splash-proof link that is also vibration-resistant.

APPLICATIONS
This product has a wide range of applications. Due to its specific design it is
highly suitable for connecting soft and brittle materials, such as plastic,
cardboard, etc.

49
 BLIND RIVETS MULTI-LINK

MULTI-LINK blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 2,5]

carbon steel zinc plated

AIMg 2,5 / STEEL DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,0 8,0 0,5 ~ 5,0 H2S-30080 6,0

[+0,05/-0,13] 9,5 2,0 ~ 6,5 H2S-30095 [+/- 1,40 1,60 27 810 620
12,5 5,0 ~ 9,5 H2S-30125 0,24]
3,1~3,3
mm

3,2 8,0 0,5 ~ 5,0 H2S-32080 6,0

[+0,05/-0,13] 9,5 2,0 ~ 6,5 H2S-32095 [+/- 1,40 1,75 27 980 760
12,5 5,0 ~ 9,5 H2S-32125 0,24]
3,3~3,5
mm

4,0 9,5 1,0 ~ 6,0 H2S-40095 8,0

[+0,05/-0,13] 12,5 4,0 ~ 9,0 H2S-40125 [+/- 1,70 2,10 27 1.600 1.200
17,0 8,5 ~ 13,5 H2S-40170 0,29]
4,1~4,3
mm

4,8 10,0 1,0 ~ 5,0 H2S-48100
[+0,05/-0,13] 12,5 3,0 ~ 7,5 H2S-48125 9,5
15,0 5,0 ~ 10,0 H2S-48150 [+/- 2,00 2,70 27 2.350 1.690
4,9~5,2 17,0 7,0 ~ 12,0 H2S-48170 0,29]
mm 20,0 10,0 ~ 15,0 H2S-48200
24,8 14,5 ~ 19,5 H2S-48248

50
 MULTI-LINK BLIND RIVETS

MULTI-LINK blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 2,5]

carbon steel zinc plated

AIMg 2,5 / STEEL LARGE HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 8,0 0,5 ~ 5,0 H2SL095-32080

[+0,05/-0,13] 9,5 2,0 ~ 6,5 H2SL095-32095 9,5
12,5 5,0 ~ 9,5 H2SL095-32125 [+0/- 2,00 1,75 27 980 760
3,1~3,3 16,0 8,5 ~ 13,0 H2SL095-32160 0,5]
mm

4,0 9,5 1,0 ~ 6,0 H2SL120-40095
[+0,05/-0,13] 12,5 4,0 ~ 9,0 H2SL120-40125 12,0
17,0 8,5 ~ 13,5 H2SL120-40170 [+0/- 2,50 2,10 27 1.600 1.200
4,1~4,3 20,0 11,5 ~ 16,5 H2SL120-40200 0,5]
mm

4,8 10,0 1,0 ~ 5,0 H2SL140-48100
[+0,05/-0,13] 12,5 3,0 ~ 7,5 H2SL140-48125 14,0
15,0 5,0 ~ 10,0 H2SL140-48150 [+0/- 2,50 2,70 27 2.350 1.690
4,9~5,2 17,0 7,0 ~ 12,0 H2SL140-48170 0,5]
mm 20,0 10,0 ~ 15,0 H2SL140-48200

51
 BLIND RIVETS MULTI-LINK

MULTI-LINK blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 2,5]

carbon steel zinc plated

AIMg 2,5 / STEEL EXTRA LARGE HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

4,8 10,0 1,0 ~ 5,0 H2SL160-48100

[+0,05/-0,13] 12,5 3,0 ~ 7,5 H2SL160-48125 16,0
15,0 5,0 ~ 10,0 H2SL160-48150 [+0/- 2,50 2,70 27 2.350 1.690
4,9 mm 17,0 7,0 ~ 12,0 H2SL160-48170 0,5]
20,0 10,0 ~ 15,0 H2SL160-48200
24,8 14,5 ~ 19,5 H2SL160-48248

52
 MULTI-LINK BLIND RIVETS

MULTI-LINK blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 2,5]

carbon steel zinc plated

AIMg 2,5 / STEEL COUNTERSUNK HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 8,0 1,5 ~ 5,0 H2S2-32080 6,0

[+0,05/-0,13] 9,7 2,5 ~ 6,5 H2S2-32097 [+/- 1,4 1,75 27 980 760
12,5 5,0 ~ 9,5 H2S2-32125 0,24]
3,3~3,5
mm

4,0 9,5 2,0 ~ 6,0 H2S2-40095 8,0
[+0,05/-0,13] 12,5 4,0 ~ 9,0 H2S2-40125 [+/- 1,7 2,10 27 1.600 1.200
17,0 8,5 ~ 13,5 H2S2-40170 0,29]
4,1~4,3
mm

4,8 10,0 1,0 ~ 5,0 H2S2-48100
[+0,05/-0,13] 12,5 3,0 ~ 7,5 H2S2-48125 9,5
15,0 5,0 ~ 10,0 H2S2-48150 [+/- 2,0 2,70 27 2.350 1.690
4,9~5,2 17,0 7,0 ~ 12,0 H2S2-48170 0,29]
mm 20,0 10,0 ~ 15,0 H2S2-48200

53
 BLIND RIVETS MULTI-LINK

MULTI-LINK blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 2,5]

stainless steel polished

A2

AIMg 2,5 / STAINLESS STEEL A2 DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,0 8,0 0,5 ~ 5,0 H2BS-30080 6,0

[+0,05/-0,13] 9,5 2,0 ~ 6,5 H2BS-30095 [+/- 1,40 1,60 27 810 620
12,5 5,0 ~ 9,5 H2BS-30125 0,24]
3,1 mm

3,2 8,0 0,5 ~ 5,0 H2BS-32080 6,0

[+0,05/-0,13] 9,5 2,0 ~ 6,5 H2BS-32095 [+/- 1,40 1,75 27 980 760
12,5 5,0 ~ 9,5 H2BS-32125 0,24]
3,3 mm

4,0 9,5 1,0 ~ 6,0 H2BS-40095 8,0
[+0,05/-0,13] 12,5 4,0 ~ 9,0 H2BS-40125 [+/- 1,70 2,10 27 1.600 1.200
17,0 8,5 ~ 13,5 H2BS-40170 0,29]
4,1 mm

4,8 10,0 1,0 ~ 5,0 H2BS-48100
[+0,05/-0,13] 12,5 3,0 ~ 7,5 H2BS-48125 9,5
15,0 5,0 ~ 10,0 H2BS-48150 [+/- 2,00 2,70 27 2.350 1.690
4,9 mm 17,0 7,0 ~ 12,0 H2BS-48170 0,29]
20,0 10,0 ~ 15,0 H2BS-48200
24,8 14,5 ~ 19,5 H2BS-48248

54
 MULTI-LINK BLIND RIVETS

MULTI-LINK blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 2,5]

stainless steel polished

A2

AIMg 2,5 / STAINLESS STEEL A2 LARGE HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 8,0 0,5 ~ 5,0 H2BSL095-32080

[+0,05/-0,13] 9,5 2,0 ~ 6,5 H2BSL095-32095 9,5
12,5 5,0 ~ 9,5 H2BSL095-32125 [+0/- 2,00 1,75 27 980 760
3,3 mm 16,0 8,5 ~ 13,0 H2BSL095-32160 0,5]

4,0 9,5 1,0 ~ 6,0 H2BSL120-40095

[+0,05/-0,13] 12,5 4,0 ~ 9,0 H2BSL120-40125 12,0
17,0 8,5 ~ 13,5 H2BSL120-40170 [+0/- 2,50 2,10 27 1.600 1.120
4,1 mm 20,0 11,5 ~ 16,5 H2BSL120-40200 0,5]

4,8 10,0 1,0 ~ 5,0 H2BSL140-48100

[+0,05/-0,13] 12,5 3,0 ~ 7,5 H2BSL140-48125 14,0
15,0 5,0 ~ 10,0 H2BSL140-48150 [+0/- 2,50 2,70 27 2.350 1.690
4,9 mm 17,0 7,0 ~ 12,0 H2BSL140-48170 0,5]
20,0 10,0 ~ 15,0 H2BSL140-48200

55
 BLIND RIVETS MULTI-LINK

MULTI-LINK blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 2,5]

stainless steel polished

A2

AIMg 2,5 / STAINLESS STEEL A2

EXTRA LARGE HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

4,8 10,0 1,0 ~ 5,0 H2BSL160-48100

[+0,05/-0,13] 12,5 3,0 ~ 7,5 H2BSL160-48125 16,0
15,0 5,0 ~ 10,0 H2BSL160-48150 [+0/- 2,50 2,70 27 2.350 1.690
4,9 mm 17,0 7,0 ~ 12,0 H2BSL160-48170 0,5]
20,0 10,0 ~ 15,0 H2BSL160-48200
24,8 14,5 ~ 19,5 H2BSL160-48248

56
 MULTI-LINK BLIND RIVETS

MULTI-LINK blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 2,5]

stainless steel polished

A2

AIMg 2,5 / STAINLESS STEEL A2

COUNTERSUNK HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 8,0 1,5 ~ 5,0 H2BS2-32080 6,0

[+0,05/-0,13] 9,7 2,0 ~ 6,5 H2BS2-32097 [+/- 1,4 1,75 27 980 760
12,5 5,0 ~ 9,5 H2BS2-32125 0,24]
3,3 mm

4,0 9,5 2,0 ~ 6,0 H2BS2-40095 8,0
[+0,05/-0,13] 12,5 4,0 ~ 9,0 H2BS2-40125 [+/- 1,7 2,10 27 1.600 1.200
17,0 8,5 ~ 13,5 H2BS2-40170 0,29]
4,1 mm

4,8 10,0 2,5 ~ 5,0 H2BS2-48100
[+0,05/-0,13] 12,5 3,0 ~ 7,5 H2BS2-48125 9,5
15,0 5,0 ~ 10,0 H2BS2-48150 [+/- 2,0 2,70 27 2.350 1.690
4,9 mm 17,0 7,0 ~ 12,0 H2BS2-48170 0,29]
20,0 10,0 ~ 15,0 H2BS2-48200

57
 BLIND RIVETS MULTI-LINK

MULTI-LINK blind rivets

MATERIALS FINISH

carbon steel zinc plated

carbon steel zinc plated

STEEL / STEEL DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 7,0 1,0 ~ 3,5 GS-32070 7,2 1,00

[+0,05/-0,13] 9,0 2,0 ~ 5,5 GS-32090 [+/- [+/- 2,10 27 1.700 1.500
11,0 4,0 ~ 7,0 GS-32110 0,25] 0,15]
3,3 mm

4,0 10,8 1,5 ~ 4,5 GS-40108 8,1 1,20

[+0,05/-0,13] 12,5 3,0 ~ 6,5 GS-40125 [+/- [+/- 2,45 27 2.350 1.955
15,0 5,5 ~ 8,5 GS-40150 0,25] 0,15]
4,1 mm

4,8 10,2 1,5 ~ 4,5 GS-48102 9,8 1,75
[+0,05/-0,13] 12,7 3,5 ~ 7,5 GS-48127 [+/- [+/- 3,10 27 3.600 3.335
13,5 6,0 ~ 8,5 GS-48135 0,25] 0,15]
4,9 mm 17,5 8,0 ~ 12,0 GS-48175

58
 MULTI-LINK BLIND RIVETS

MULTI-LINK blind rivets

MATERIALS FINISH

stainless steel polished

A2

stainless steel polished

A2

STAINLESS STEEL A2 / STAINLESS STEEL A2

DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 8,0 1,0 ~ 4,0 QBS-32080 7,2 1,00

[+0,05/-0,13] 10,0 3,0 ~ 6,0 QBS-32100 [+/- [+/- 2,10 27 1.800 1.650
12,0 4,0 ~ 8,0 QBS-32120 0,25] 0,15]
3,3 mm

4,0 10,0 1,5 ~ 5,0 QBS-40100 8,1 1,20

[+0,05/-0,13] 12,0 3,5 ~ 7,0 QBS-40120 [+/- [+/- 2,45 27 3.350 4.200
15,0 6,0 ~ 9,5 QBS-40150 0,25] 0,15]
4,1 mm

4,8 10,0 1,5 ~ 5,0 QBS-48100 9,8 1,75

[+0,05/-0,13] 12,0 3,0 ~ 7,0 QBS-48120 [+/- [+/- 3,20 27 4.300 5.000
15,0 6,5 ~ 10,0 QBS-48150 0,25] 0,25]
4,9 mm 17,5 9,0 ~ 12,5 QBS-48175

PLEASE NOTE: Countersunk head available on request. For more information, please contact our
sales office at [email protected]

59
 together we
can have it
done in a jiffy.

60
 CHARACTERISTICS & APPLICATIONS

1.4 TRI-LINK
CHARACTERISTICS
The body of the tri-link rivet has three grooves that bend open upon traction,
creating a large head at the back side.

This makes the tri-link rivet particularly suited for connecting very soft and
breakable materials that do not have high pull-out strength and shear capacity
requirements.

APPLICATIONS
This type of blind rivet is frequently used for attaching leather, plastic, glass,
cardboard, etc.

61
 BLIND RIVETS TRI-LINK

TRI-LINK blind rivets

MATERIALS FINISH

aluminium polished
alloy

aluminium polished
alloy

ALUMINIUM ALLOY / ALUMINIUM ALLOY

DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

4,0 13,6 1,0 ~ 3,0 HLDL-40136 8,0

[+/-0,10] 18,8 3,0 ~ 7,0 HLDL-40188 [+/- 1,70 2,50 27 800 500
0,29]
4,2~4,4
mm

4,8 15,3 1,0 ~ 3,0 HLDL-48153 9,5
[+/-0,10] 20,5 3,0 ~ 9,0 HLDL-48205 [+/- 2,00 2,90 27 1.100 800
24,5 5,0 ~ 12,0 HLDL-48245 0,29]
5,0~5,2
mm

62
 CHARACTERISTICS & APPLICATIONS

1.5 SPECIAL RIVETS

PEEL TYPE RIVETS
TECHNICAL CHARACTERISTICS
The mandrel of the peel rivet has four cutting edges that cut the body into four parts upon traction,
creating four curls that contract and fasten the material to be attached.

APPLICATIONS

Peel rivets are mainly used when the material on the back side is soft, while the material on the
front side is hard, for example a steel or aluminium plate on a wooden or fibre board.

GROOVED TYPE RIVETS

CHARACTERISTICS

The grooved rivet was specially developed for attaching hard materials on a fibrous base (e.g. wood or
plastic) where the hole does not penetrate all the way (pot hole) and the link is made inside the hole.
The grooves in the body connect with the material.
The breaking point of the mandrel is such that the remaining part stays in the body, ensuring that
the link does not lose strength.

APPLICATIONS
This type of rivet is often used in so-called ‘flight-cases’ for attaching the aluminium corners and edge
strips on the wooden cases.

HAMMER DRIVE BLIND RIVETS

CHARACTERISTICS
The hammer drive blind rivet is made of hard aluminium (AlMg 5.0) with a stainless steel drive pin and
was developed for connecting hard materials onto solid wood with holes that do not go all the way
through. When the drive pin is driven into the hammer rivet, the back end of the rivet splits into
three or four parts, establishing the connection. Hammer drive blind rivets are placed using a regular
hammer.

APPLICATIONS

Roofing
Wooden constructions

63
 BLIND RIVETS SPECIALS

PEEL TYPE blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 5,0]

carbon steel zinc plated

AIMg 5,0 / STEEL DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 8,0 0,0 ~ 1,0 HW-32080

[+/-0,08] 10,0 1,0 ~ 3,0 HW-32100 6,0
12,0 3,0 ~ 5,0 HW-32120 [+/- 1,4 1,80 27 750 820
3,5~3,7 14,0 5,0 ~ 7,0 HW-32140 0,24]
mm 16,0 7,0 ~ 9,0 HW-32160
18,0 9,0 ~ 11,0 HW-32180

4,0 10,0 1,0 ~ 3,0 HW-40100

[+0,08/-0,15] 12,0 3,0 ~ 5,0 HW-40120
14,0 5,0 ~ 7,0 HW-40140 8,0
4,3~4,5 16,0 7,0 ~ 9,0 HW-40160 [+/- 1,7 2,20 27 1.140 1.280
mm 18,0 9,0 ~ 11,0 HW-40180 0,29]
20,0 11,0 ~ 13,0 HW-40200

4,8 10,0 1,0 ~ 3,0 HW-48100

[+0,08/-0,15] 12,0 3,0 ~ 5,0 HW-48120
14,0 5,0 ~ 7,0 HW-48140
5,1~5,3 16,0 7,0 ~ 9,0 HW-48160 9,5
mm 18,0 9,0 ~ 11,0 HW-48180 [+/- 2,0 2,65 27 1.800 1.855
20,0 11,0 ~ 13,0 HW-48200 0,29]
22,0 13,0 ~ 15,0 HW-48220
25,0 16,0 ~ 18,0 HW-48250
30,0 19,0 ~ 24,0 HW-48300

PLEASE NOTE: Large and extra large head available on request. For more information, please contact
our sales office at [email protected]

64
 SPECIALS BLIND RIVETS

GROOVED TYPE blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 2,5]

carbon steel zinc plated

AIMg 2,5 / STEEL DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 10,0 max. 6,0 H2G-32100 6,0

[+0,35/-0] 14,0 max. 10,0 H2G-32140 [+/- 1,40 1,80 27 930 670
0,24]
3,4 mm

4,0 8,0 max. 4,0 H2G-40080

[+0,35/-0] 10,0 max. 6,0 H2G-40100 8,0
12,0 max. 8,0 H2G-40120 [+/- 1,70 2,20 27 1.400 1.200
4,3 mm 16,0 max. 12,0 H2G-40160 0,29]

4,8 8,0 max. 4,0 H2G-48080
[+0,35/-0] 10,0 max. 6,0 H2G-48100
12,0 max. 8,0 H2G-48120
5,1 mm 14,0 max. 10,0 H2G-48140 9,5
16,0 max. 12,0 H2G-48160 [+/- 2,00 2,65 27 2.300 1.600
18,0 max. 14,0 H2G-48180 0,29]
20,0 max. 16,0 H2G-48200
25,0 max. 21,0 H2G-48250
30,0 max. 26,0 H2G-48300

65
 BLIND RIVETS SPECIALS

HAMMER DRIVE blind rivets

MATERIALS FINISH
aluminium
alloy polished
[AIMg 5,0]

stainless steel polished

A2

AIMg 5,0 / STAINLESS STEEL A2

EXTRA LARGE HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TENSILE SHEAR

+0,9/-0 min. ~ max. max. [N] [N]

4,8 9,0 4,5 ~ 7,5 HBJXL160-48090

[+0/-0,15] 11,0 6,5 ~ 9,0 HBJXL160-48110
16,0 11,5 ~ 13,0 HBJXL160-48160
5,3 mm 20,0 15,5 ~ 17,0 HBJXL160-48200 16,0 2,6
max. 25,0 20,5 ~ 22,0 HBJXL160-48250 [+/- [+/- 2.950 4.900
30,0 25,5 ~ 27,0 HBJXL160-48300 0,40] 0,30]
35,0 30,5 ~ 32,0 HBJXL160-48350
40,0 35,5 ~ 37,0 HBJXL160-48400
45,0 40,5 ~ 42,0 HBJXL160-48450
50,0 45,5 ~ 47,0 HBJXL160-48500

66
 CHARACTERISTICS & APPLICATIONS

1.6 P-LINK
CHARACTERISTICS
P-link heavy-duty structural blind rivets have been developed for heavy
applications and have the following characteristics:

- high tensile and shear strength

- the mandrel head is secured inside the body
- the link is waterproof
- large grip range
- vibration-resistant
- no special nosepiece is required for placing

P-link structural blind rivets are available in steel, stainless steel, and
aluminium with a dome or countersunk head.

APPLICATIONS
- automotive industry
- sea containers
- coach work
- heavy pallet constructions

67
 STRUCTURAL BLIND RIVETS P-LINK

P-LINK structural blind rivets

MATERIALS FINISH

carbon steel zinc plated

carbon steel zinc plated

STEEL / STEEL DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,99/-0 min. ~ max. max. ≈ min. [N] [N]

4,8 10,0 1,6 ~ 6,4 GZ-48100 9,6

[+/-0,09] 14,0 1,6 ~ 11,1 GZ-48140 [+/- 2,40 3,00 27 4.800 6.000
0,29]
4,9~5,2
mm

6,4 14,0 2,0 ~ 9,5 GZ-64140 13,0

[+/-0,11] 20,0 2,0 ~ 15,9 GZ-64200 [+/- 3,10 4,00 29 9.200 10.690
0,35]
6,6~6,9
mm

PLEASE NOTE: We can also offer large dimensions on request. For more
information, please contact our sales office at [email protected]

68
 P-LINK STRUCTURAL BLIND RIVETS

P-LINK structural blind rivets

MATERIALS FINISH

carbon steel zinc plated

carbon steel zinc plated

STEEL / STEEL COUNTERSUNK HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,99/-0 min. ~ max. max. ≈ min. [N] [N]

4,8 12,0 3,6 ~ 7,9 GZ2-48120 8,5

[+/-0,09] 16,0 3,6 ~ 12,7 GZ2-48160 [+/- 1,90 3,00 27 4.800 6.000
0,29]
4,9~5,2
mm

6,4 16,0 5,0 ~ 11,1 GZ2-64160 10,2
[+/-0,11] 22,0 5,0 ~ 17,5 GZ2-64220 [+/- 2,20 4,00 29 9.200 10.690
0,40]
6,6~6,9
mm

69
 STRUCTURAL BLIND RIVETS P-LINK

P-LINK structural blind rivets

MATERIALS FINISH

stainless steel polished

A2

stainless steel polished

A2

STAINLESS STEEL A2 / STAINLESS STEEL A2 DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,99/-0 min. ~ max. max. ≈ min. [N] [N]

4,8 10,0 1,6 ~ 6,4 QBZ-48100 9,6

[+/-0,09] 14,0 1,6 ~ 11,1 QBZ-48140 [+/- 2,40 3,00 27 4.800 6.400
0,29]
4,9~5,2
mm

6,4 14,0 2,0 ~ 9,5 QBZ-64140 13

[+/-0,11] 20,0 2,0 ~ 15,9 QBZ-64200 [+/- 3,10 4,00 29 8.240 10.690
0,35]
6,6~6,9
mm

70
 P-LINK STRUCTURAL BLIND RIVETS

P-LINK structural blind rivets

MATERIALS FINISH

stainless steel polished

A2

stainless steel polished

A2

STAINLESS STEEL A2 / STAINLESS STEEL A2

COUNTERSUNK HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,99/-0 min. ~ max. max. ≈ min. [N] [N]

4,8 12,0 3,6 ~ 7,9 QBZ2-48120 8,5

[+/-0,09] 16,0 3,6 ~ 12,7 QBZ2-48160 [+/- 1,90 3,00 27 4.800 6.400
0,29]
4,9~5,2
mm

6,4 16,0 5,0 ~ 11,1 QBZ2-64160 10,2

[+/-0,11] 22,0 5,0 ~ 17,5 QBZ2-64220 [+/- 2,20 4,00 29 8.240 10.690
0,40]
6,6~6,9
mm

71
 STRUCTURAL BLIND RIVETS P-LINK

P-LINK structural blind rivets

MATERIALS FINISH

aluminium polished
alloy

aluminium polished
alloy

ALUMINIUM ALLOY / ALUMINIUM ALLOY DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,99/-0 min. ~ max. max. ≈ min. [N] [N]

4,8 10,0 1,6 ~ 6,4 HZ-48100 9,6

[+/-0,09] 14,0 1,6 ~ 11,1 HZ-48140 [+/- 2,40 3,00 27 2.220 2.800
0,29]
5,0~5,2
mm

6,4 14,0 2,0 ~ 9,5 HZ-64140 13

[+/-0,11] 20,0 2,0 ~ 16,0 HZ-64200 [+/- 3,10 4,00 29 3.960 5.400
0,35]
6,7~6,9
mm

72
 P-LINK STRUCTURAL BLIND RIVETS

P-LINK structural blind rivets

MATERIALS FINISH

aluminium polished
alloy

aluminium polished
alloy

ALUMINIUM ALLOY / ALUMINIUM ALLOY

COUNTERSUNK HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,99/-0 min. ~ max. max. ≈ min. [N] [N]

4,8 12,0 3,5 ~ 8,0 HZ2-48120 8,5

[+/-0,09] 16,0 3,5 ~ 12,5 HZ2-48160 [+/- 1,90 3,00 27 2.200 2.800
0,29]
5,0~5,2
mm

6,4 16,0 5,0 ~ 11,1 HZ2-64160 10,2

[+/-0,11] 22,0 5,0 ~ 17,5 HZ2-64220 [+/- 2,20 4,00 29 3.960 5.400
0,40]
6,7~6,9
mm

73
 only 56 more rivets to go.

74
 CHARACTERISTICS & APPLICATIONS

1.7 A-LINK
CHARACTERISTICS
A-link heavy-duty structural blind rivets have been specially developed for
the heaviest applications and have the following unique characteristics:

- high tensile and shear strength

- the mandrel head is secured inside the body
- the link is waterproof
- large grip range
- vibration-resistant
- no special nosepiece is required for placing

A-link structural blind rivets are available in steel or stainless steel with a
dome head. A-link rivets with countersunk head are available on request.

APPLICATIONS
- automotive industry
- sea containers
- coach work
- heavy pallet constructions

75
 STRUCTURAL BLIND RIVETS A-LINK

A-LINK structural blind rivets

MATERIALS FINISH

carbon steel zinc plated

carbon steel zinc plated

STEEL / STEEL DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 7,0 1,0 ~ 3,0 GD-32070 6,0

[+0,09/-0,15] 9,0 3,0 ~ 5,0 GD-32090 [+/- 1,4 2,10 27 1.300 1.200
11,0 5,0 ~ 7,0 GD-32110 0,24]
3,3~3,4
mm

4,0 8,0 1,0 ~ 3,0 GD-40080 7,8

[+0,09/-0,15] 10,0 3,0 ~ 5,0 GD-40100 [+/- 1,7 2,50 27 2.800 2.400
12,0 5,0 ~ 7,0 GD-40120 0,29]
4,1~4,3
mm

4,8 9,5 1,5 ~ 3,5 GD-48095 9,3

[+0,09/-0,15] 12,0 3,5 ~ 6,0 GD-48120 [+/- 2,0 3,10 27 3.800 3.600
14,0 6,0 ~ 8,5 GD-48140 0,29]
4,9~5,1
mm

76
 A-LINK STRUCTURAL BLIND RIVETS

A-LINK structural blind rivets

MATERIALS FINISH

stainless steel polished

A2

stainless steel polished

A2

STAINLESS STEEL A2 / STAINLESS STEEL A2

DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,9/-0 min. ~ max. max. ≈ min. [N] [N]

3,2 7,0 1,0 ~ 3,0 QBA-32070 6,0

[+0,09/-0,15] 9,0 3,0 ~ 5,0 QBA-32090 [+/- 1,4 2,10 27 2.000 1.650
11,0 5,0 ~ 7,0 QBA-32110 0,24]
3,3~3,4
mm

4,0 8,0 1,0 ~ 3,0 QBA-40080 7,8

[+0,09/-0,15] 10,0 3,0 ~ 5,0 QBA-40100 [+/- 1,7 2,50 27 4.000 3.700
12,0 5,0 ~ 7,0 QBA-40120 0,29]
4,1~4,3
mm

4,8 9,5 1,5 ~ 3,5 QBA-48095 9,3

[+0,09/-0,15] 12,0 3,5 ~ 6,0 QBA-48120 [+/- 2,0 3,20 27 5.000 5.500
14,0 6,0 ~ 8,5 QBA-48140 0,29]
4,9~5,1
mm

PLEASE NOTE: Countersunk head available on request. For more information, please contact our
sales office at [email protected]

77
 this is really flexible.

78
 CHARACTERISTICS & APPLICATIONS

1.8 H-LINK
CHARACTERISTICS
H-link heavy-duty structural blind rivets have been specially developed for the
heaviest applications and have the following unique characteristics:

- extra high tensile and shear strength
- the mandrel head is secured inside the body
- the link is waterproof
- large grip range
- vibration-resistant
- no special nosepiece is required for placing
- the strongest structural blind rivet in our range

APPLICATIONS
- automotive industry
- sea containers
- coach work
- heavy pallet constructions

79
 STRUCTURAL BLIND RIVETS H-LINK

H-LINK structural blind rivets

MATERIALS FINISH

carbon steel zinc plated

carbon steel zinc plated

STEEL / STEEL DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+0,99/-0 min. ~ max. max. ≈ min.

6,4 9,0 1,5 ~ 3,5 GQ-64090 8.925

[+0,15/-0,05] 10,0 2,8 ~ 4,8 GQ-64100 10.200
11,0 3,35 ~ 5,35 GQ-64110 10.625
6,7~6,9 12,0 4,8 ~ 6,8 GQ-64120 13,0 3,0 10.625
mm 14,0 6,8 ~ 8,8 GQ-64140 [+/- [+/- 4,10 30 7.100 12.750
15,0 7,5 ~ 9,5 GQ-64150 0,40/ 0,40/ 12.750
16,0 8,8 ~ 10,8 GQ-64160 -0,20] -0] 13.600
17,0 9,8 ~ 11,8 GQ-64170 13.600
18,0 10,8 ~ 12,8 GQ-64180 13.600
19,0 11,8 ~ 13,8 GQ-64190 13.600

PLEASE NOTE: Aluminium alloy / aluminium alloy with dome head available on request. For more
information, please contact our sales office at [email protected]

80
 CHARACTERISTICS & APPLICATIONS

1.9 M-LINK
M-LINK ‘LOCKING SYSTEM’

CHARACTERISTICS
M-link heavy-duty structural blind rivets have been developed for heavy
applications and have the following characteristics:

- high tensile and shear strength

- the mandrel head is secured inside the body
- the link is waterproof
- large grip range
- vibration-resistant
- no special nosepiece is required for placing

M-link structural blind rivets are available in steel, stainless steel, and
aluminium with a dome or countersunk head.

APPLICATIONS
- automotive industry
- sea containers
- coach work
- heavy pallet constructions

81
 STRUCTURAL BLIND RIVETS M-LINK

M-LINK structural blind rivets

MATERIALS FINISH

carbon steel zinc plated

carbon steel zinc plated

STEEL / STEEL DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+/-0,99 min. ~ max. max. max. ≈ min. [N] [N]

4,8 10,0 1,63 ~ 6,86 GWZ-48100 9,5 2,5 3,0 27 4.450 5.785
[+0,08/-0,15] 14,0 1,63 ~ 11,10 GWZ-48140 [+0,6
/-0,3]
4,9~5,2
mm

6,4 14,0 2,03 ~ 9,53 GWZ-64140 12,7 3,0 4,1 27 8.230 10.675
[+0,18/-0,05] 19,0 2,03 ~ 15,87 GWZ-64190 [+/-
0,7]
6,6~7,0
mm

82
 M-LINK STRUCTURAL BLIND RIVETS

M-LINK structural blind rivets

MATERIALS FINISH

carbon steel zinc plated

carbon steel zinc plated

STEEL / STEEL COUNTERSUNK HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+/-0,99 min. ~ max. min. max. ≈ min. [N] [N]

4,8 12,0 3,2 ~ 8,4 GWZ2-48120 8,0 2,2 3,0 27 4.450 5.785
[+0,08/-0,15] 16,0 3,2 ~ 12,2 GWZ2-48160 [+/-
0,5]
4,9~5,2
mm

6,4 17,0 3,2 ~ 12,1 GWZ2-64170 10,0 2,4 4,1 17 8.230 10.675
[+0,08/-0,05] [+0,6
/-0,5]
6,6~7,0
mm

83
 STRUCTURAL BLIND RIVETS M-LINK

M-LINK structural blind rivets

MATERIALS FINISH

stainless steel polished

A2

stainless steel polished

A2

STAINLESS STEEL A2 / STAINLESS STEEL A2

DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+/-0,99 min. ~ max. max. max. ≈ min. [N] [N]

4,8 10,0 1,63 ~ 6,86 QBWZ-48100 9,5 2,5 3,0 27 4.450 5.785
[+0,08/-0,15] 14,0 1,63 ~ 11,10 QBWZ-48140 [+0,6
/-0,3]
4,9~5,2
mm

6,4 14,0 2,03 ~ 9,53 QBWZ-64140 12,7 3,0 4,1 27 8.230 10.675
[+0,18/-0,05] 19,0 2,03 ~ 15,87 QBWZ-64190 [+/-
0,7]
6,6~7,0
mm

84
 M-LINK STRUCTURAL BLIND RIVETS

M-LINK structural blind rivets

MATERIALS FINISH

stainless steel polished

A2

stainless steel polished

A2

STAINLESS STEEL A2 / STAINLESS STEEL A2

COUNTERSUNK HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+/-0,99 min. ~ max. min. max. ≈ min. [N] [N]

4,8 12,0 3,2 ~ 8,4 QBWZ2-48120 8,3 2,2 3,0 27 4.450 5.785
[+0,08/-0,15] 16,0 3,2 ~ 12,2 QBWZ2-48160

4,9~5,2
mm

6,4 17,0 3,2 ~ 12,0 QBWZ2-64170 10,1 2,4 4,1 27 8.230 10.675
[+0,18/-0,05]

6,6~7,0
mm

85
 STRUCTURAL BLIND RIVETS M-LINK

M-LINK structural blind rivets

MATERIALS FINISH

aluminium polished
alloy

aluminium polished
alloy

ALUMINIUM ALLOY / ALUMINIUM ALLOY

DOME HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+/-0,99 min. ~ max. max. max. ≈ min. [N] [N]

4,8 10,0 1,6 ~ 6,9 HWZ-48100 10,1 2,1 3,0 27 2.900 2.100
14,0 1,6 ~ 11,1 HWZ-48140
4,9~5,1
mm

6,4 14,0 2,0 ~ 9,5 HWZ-64140 13,4 2,9 4,0 31 4.900 4.100
19,0 2,0 ~ 15,9 HWZ-64190
6,6~7,0
mm

86
 M-LINK STRUCTURAL BLIND RIVETS

M-LINK structural blind rivets

MATERIALS FINISH

aluminium polished
alloy

aluminium polished
alloy

ALUMINIUM ALLOY / ALUMINIUM ALLOY

COUNTERSUNK HEAD dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k dm p TENSILE SHEAR

+/-0,99 min. ~ max. min. max. ≈ min. [N] [N]

4,8 12,0 3,2 ~ 8,4 HWZ2-48120 8,3 2,2 3,0 27 2.700 2.000
16,0 3,2 ~ 12,2 HWZ2-48160
4,9~5,1
mm

6,4 17,0 3,2 ~ 12,0 HWZ2-64170 10,1 2,4 4,0 31 5.900 4.100

6,6~7,0
mm

87
 faster, faster, faster!

88
 INTRO FASTENING TECHNOLOGY

FASTENING TECHNOLOGY
BLIND RIVET FASTENING TECHNOLOGY
what a blind rivet is

terminology of blind rivets

tools – to operate rivet fastening

how to choose a correct rivet

89
 FASTENING TECHNOLOGY

BLIND RIVET FASTENING TECHNOLOGY

WHAT A BLIND RIVET IS According to the applications and assembly
features, there are different head styles of
blind rivets: dome head, flat head, large head,
A blind rivet is a fastener which can be operated
extra large head (normally with head diameter
to fasten the work pieces from one side only.
16,0mm) and countersunk head. Mandrel ends
Normally, when the operator cannot reach the
also have different styles, there are normal
other side for some reasons, and the other side
chisel end, point end as well as conical mandrel
of the work pieces is not visible – “blind”, the
end (as SAVECON mandrels of standard Riv-link
blind rivet is the best solution. As long as a blind
rivets, all stainless steel mandrels are designed
rivet is used to fasten the work pieces, the rivet
as the conical mandrel end).
cannot be loosen unless it is damaged.

TERMINOLOGY OF MECHANICAL STRENGTHS

The performance of a blind rivet mainly requires
BLIND RIVETS the mechanical powers of tensile and shear, as
illustrated:
COMPONENTS & DIMENSIONS
A blind rivet is composed of 2 parts: the body
and the mandrel assembled:

Body and its dimensions:

TOOLS - TO OPERATE RIVET

FASTENING
Setting blind rivets requires specially designed
tools – riveting tools or specially designed
machines on production lines. There are
Mandrel:
hydraulic riveting tools powered by air pressure,
battery tools powered by Li-on battery, and
hand riveting tools operated manually. However,
special hammer drive rivets are to be set only by
simple hammers, as an exception.

90
 FASTENING TECHNOLOGY

HOW TO CHOOSE A CORRECT STEP 3

To choose the rivet diameter correctly as per the
RIVET recommended hole size listed in this catalogue,
matching the diameter of the pre-drilled hole on
STEP 1 the work pieces.
According to the application requirements
and the features of work pieces, to choose STEP 4
and determine which rivet type is the most To measure the total thickness of the work
applicable and economical, such as Riv-link pieces to be jointed, and find out the correct
standard rivets, Seal-link closed end rivets etc. body length as per the “grip range” listed in
as listed. The functional features of different this catalogue.
rivet types are quoted in this catalogue. Rivet-
Expert is offering a pretty full range of blind
rivets applying most of the blind fastening
requirements.

STEP 2
To have a good understanding of the materials
of the work pieces to be fastened, and
determine the rivet material. While the rivet
materials are referred, we refer to the materials
of the rivet bodies. However, when different There is always a recommended thickness range
metals (work pieces and rivet bodies) come in (grip range) for each blind rivet, and correct
contact with each other, contact corrosion will choosing of the body length will consistently
arise. In order to prevent the contact corrosion, provide a good setting.
a proper choice is important. The chart below
tells you the way to choose.

91
 do we
need to
order
more
nuts?

92
 CHARACTERISTICS & TYPES

2 BLIND RIVET NUTS

TECHNICAL CHARACTERISTICS

Blind rivet nuts are designed to create a screw thread in thin metal
materials, such as plates and profiles.

This mechanical link can be applied into the material from one side.
The back side does not need to be accessible.

Blind rivet nuts can also be used to connect multiple plates.

Blind rivet nuts are available in the range M3 to M12.

Available heads:
- cylindrical head
- countersunk head
- reduced countersunk head

TYPES

Blind rivet nuts with a cylindrical shaft that are placed in a pre-drilled hole
have grooves on the shaft and under the head, which allow the nut to grip the
material and prevent turning.

Blind rivet nuts with a hexagonal shaft can only be placed in a hexagonally cut
hole. This means that it is impossible for the nut to turn.

Closed type rivet nuts are ideally suited for application in wet
environments. Because of its closed nature, this nut type is waterproof.

Blind rivet nuts are available in the following materials:

- Aluminium AlMg-5
- Steel C-1008
- Stainless steel A2 (AISI-304)
- Stainless steel A4 (AISI-316)
- Monel-400 (on request)

Special nut types are available on request.

Production Part Approval Process (PPAP) reports are also available on
request. These are particularly important for the automotive industry.

93
 TECHNICAL CHARACTERISTICS

2 BLIND RIVET BOLTS

TECHNICAL CHARACTERISTICS
Nuts can be attached onto the protruding thread

Particularly suitable for thin materials

Can be attached into the material from one side only; the rear side does not
need to be accessible

No discolouration or distortion of the material as with welding on of nuts

or bolts

94
 TECHNICAL CHARACTERISTICS

2 E.P.D.M. RUBBER BLIND RIVET NUTS

TECHNICAL CHARACTERISTICS
The high elasticity absorbs vibrations.

Can be attached into the material from one side only; the rear side does not
need to be accessible

Corrosion-resistant

Suitable for attaching multiple plates

No electrical conductivity

Suitable for both plastic and metal connections

Please note: Avoid contact with oil and/or solvents.

To be used in temperatures between -30 °C and +80 °C.

95
 BLIND RIVET NUTS CYLINDRICAL HEAD

CYLINDRICAL HEAD blind rivet nuts

MATERIAL

carbon steel
FINISH

zinc plated

STEEL KNURLED BODY/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M3 10,0 0,5 ~ 3,0 ANMF 03100 FMS 7,0 1,00 3,0 4.900 980
[+0/-0,5]
5,0 mm

M4 10,0 0,3 ~ 3,0 ANMF 04100 FMS 9,0 1,10 4,5 4.900 1.660
11,5 3,1 ~ 4,0 ANMF 04115 FMS [+0/-0,5]
6,0 mm

M5 12,0 0,3 ~ 3,0 ANMF 05120 FMS 10,0 1,10 5,4 11.080 2.740
15,0 3,1 ~ 4,0 ANMF 05150 FMS [+0/-0,5]
7,0 mm

M6 14,5 0,5 ~ 3,0 ANMF 06145 FMS 13,0 1,60 11,0 17.650 3.430
16,0 3,1 ~ 4,5 ANMF 06160 FMS [+0/-0,5]
9,0 mm

M8 16,0 0,5 ~ 3,0 ANMF 08160 FMS 16,0 1,60 29,0 27.450 4.410
18,5 3,1 ~ 5,5 ANMF 08185 FMS [+0/-0,5]
11,0 mm

M10 17,0 0,5 ~ 3,0 ANMF 10170 FMS 19,0 2,10 32,0 28.430 4.900
22,0 3,1 ~ 6,0 ANMF 10220 FMS [+0/-0,5]
13,0 mm

M12 23,0 1,0 ~ 4,0 ANMF 12230 FMS 23,0 2,10 44,2 48.050 6.860
[+0/-0,5]
16,0 mm

96
 CYLINDRICAL HEAD BLIND RIVET NUTS

CYLINDRICAL HEAD blind rivet nuts

MATERIAL

aluminium
alloy
AIMg 5,0
FINISH

polished

AIMg 5,0 KNURLED BODY/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M3 10,0 0,5 ~ 3,0 ANMF 03100 FMA 7,0 1,00 3,5 2.050 980
[+0/-0,5]
5,0 mm

M4 10,0 0,3 ~ 3,0 ANMF 04100 FMA 9,0 1,10 4,0 2.840 1.070
11,5 3,1 ~ 4,0 ANMF 04115 FMA [+0/-0,5]
6,0 mm

M5 12,0 0,3 ~ 3,0 ANMF 05120 FMA 10,0 1,10 5,0 4.900 1.170
15,0 3,1 ~ 4,0 ANMF 05150 FMA [+0/-0,5]
7,0 mm

M6 14,5 0,5 ~ 3,0 ANMF 06145 FMA 13,0 1,60 9,0 9.210 2.250
16,0 3,1 ~ 4,5 ANMF 06160 FMA [+0/-0,5]
9,0 mm

M8 16,0 0,5 ~ 3,0 ANMF 08160 FMA 16,0 1,60 10,0 13.720 2.450
18,5 3,1 ~ 5,5 ANMF 08185 FMA [+0/-0,5]
11,0 mm

M10 17,0 0,5 ~ 3,0 ANMF 10170 FMA 19,0 2,10 19,9 20.590 3.430
22,0 3,1 ~ 6,0 ANMF 10220 FMA [+0/-0,5]
13,0 mm

M12 23,0 1,0 ~ 4,0 ANMF 12230 FMA 23,0 2,10 26,5 28.430 4.900
[+0/-0,5]
16,0 mm

97
 BLIND RIVET NUTS CYLINDRICAL HEAD

CYLINDRICAL HEAD blind rivet nuts

MATERIAL

stainless steel
A2
FINISH

polished

STAINLESS STEEL A2 KNURLED BODY/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M3 10,0 0,5 ~ 3,0 ANMF 03100 FM2 7,0 1,00 3,5 5.390 1.760
[+0/-0,5]
5,0 mm

M4 10,0 0,3 ~ 3,0 ANMF 04100 FM2 9,0 1,10 6,9 6.860 3.920
11,5 3,1 ~ 4,0 ANMF 04115 FM2 [+0/-0,5]
6,0 mm

M5 12,0 0,3 ~ 3,0 ANMF 05120 FM2 10,0 1,10 10,0 11.760 4.510
15,0 3,1 ~ 4,0 ANMF 05150 FM2 [+0/-0,5]
7,0 mm

M6 14,5 0,5 ~ 3,0 ANMF 06145 FM2 13,0 1,60 20,0 18.630 4.900
16,0 3,1 ~ 4,5 ANMF 06160 FM2 [+0/-0,5]
9,0 mm

M8 16,0 0,5 ~ 3,0 ANMF 08160 FM2 16,0 1,60 29,0 27.450 6.860
18,5 3,1 ~ 5,5 ANMF 08185 FM2 [+0/-0,5]
11,0 mm

M10 17,0 0,5 ~ 3,0 ANMF 10170 FM2 19,0 2,10 38,0 29.410 7.840
22,0 3,1 ~ 6,0 ANMF 10220 FM2 [+0/-0,5]
13,0 mm

M12 23,0 1,0 ~ 4,0 ANMF 12230 FM2 23,0 2,10 48,5 52.950 9.800
[+0/-0,5]
16,0 mm

98
 CYLINDRICAL HEAD BLIND RIVET NUTS

CYLINDRICAL HEAD blind rivet nuts

dk
MATERIAL

stainless steel k
A4
L
FINISH

polished
D

STAINLESS STEEL A4 ROUND SHAFT/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M5 12,0 0,3 ~ 3,0 ANMF 05120 FM4 10,0 1,10 11,0 11.700 4.000
[+0/-0,5]
7,0 mm

M6 14,5 0,5 ~ 3,0 ANMF 06145 FM4 13,0 1,60 22,2 18.600 5.300
[+0/-0,5]
9,0 mm

M8 16,0 0,5 ~ 3,0 ANMF 08160 FM4 16,0 1,60 30,5 26.400 7.800
[+0/-0,5]
11,0 mm

M10 17,0 0,5 ~ 3,0 ANMF 10170 FM4 19,0 2,10 37,0 35.200 8.800
[+0/-0,5]
13,0 mm

M12 23,0 1,0 ~ 4,0 ANMF 12230 FM4 23,0 2,10 50,0 53.900 9.800
[+0/-0,5]
16,0 mm

99
 BLIND RIVET NUTS CYLINDRICAL HEAD

CYLINDRICAL HEAD blind rivet nuts

MATERIAL

carbon steel
FINISH

zinc plated

STEEL KNURLED BODY/CLOSED END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M4 16,5 0,3 ~ 3,0 ACMF 04165 FMS 9,0 1,10 4,5 4.900 1.660
[+0/-0,5]
6,0 mm

M5 19,0 0,3 ~ 3,0 ACMF 05190 FMS 10,0 1,10 5,4 11.080 2.740
[+0/-0,5]
7,0 mm

M6 22,0 0,5 ~ 3,0 ACMF 06220 FMS 13,0 1,60 11,0 17.650 3.430
[+0/-0,5]
9,0 mm

M8 26,5 0,5 ~ 3,0 ACMF 08265 FMS 16,0 1,60 29,0 27.450 4.410
[+0/-0,5]
11,0 mm

100
 CYLINDRICAL HEAD BLIND RIVET NUTS

CYLINDRICAL HEAD blind rivet nuts

MATERIAL

carbon steel
FINISH

zinc plated

STEEL SEMI-HEXAGON BODY/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M4 11,5 0,5 ~ 2,5 ANMF 04115 FHS 9,5 1,10 5,0 3.530 1.470
SW1 [+0/-0,5]
6,1 mm

M5 13,5 0,5 ~ 3,0 ANMF 05135 FHS 10,5 1,10 7,0 4.900 1.760
SW1 [+0/-0,5]
7,1 mm

M6 15,5 0,5 ~ 3,0 ANMF 06155 FHS 12,5 1,60 14,0 14.700 2.740
SW1 [+0/-0,5]
9,1 mm

M8 17,5 0,5 ~ 3,0 ANMF 08175 FHS 14,5 1,60 21,0 21.570 2.940
SW1 [+0,3/-
11,1 mm 0,3]

M10 22,0 1,0 ~ 4,0 ANMF 10220 FHS 16,5 2,10 35,0 29.410 3.430
SW1 [+0/-0,5]
13,1 mm

101
 BLIND RIVET NUTS CYLINDRICAL HEAD

CYLINDRICAL HEAD blind rivet nuts

MATERIAL

stainless steel
A2
FINISH

polished

STAINLESS STEEL A2 SEMI-HEXAGON BODY/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M4 11,5 0,5 ~2,5 ANMF 04115 H2 9,5 1,10 12,0 9.800 2.640
SW1 [+0/-0,5]
6,1 mm

M5 14,5 0,5 ~ 3,0 ANMF 05145 H2 10,5 1,10 14,2 12.740 3.620
SW1 [+0/-0,5]
7,1 mm

M6 17,0 0,5 ~ 3,0 ANMF 06170 H2 12,5 1,60 26,6 21.570 4.700
SW1 [+0/-0,5]
9,1 mm

M8 18,8 0,5 ~ 3,0 ANMF 08188 H2 14,5 1,60 39,5 37.260 6.860
SW1 [+0,3/0,3]
11,1 mm

M10 24,0 1,0 ~ 4,0 ANMF 10240 H2 16,5 2,10 45,0 47.070 8.620
SW1 [+0/-0,5]
13,1 mm

102
 CYLINDRICAL HEAD BLIND RIVET NUTS

CYLINDRICAL HEAD blind rivet nuts

MATERIAL

carbon steel
FINISH

zinc plated

STEEL FULL-HEXAGON BODY/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M4 11,5 0,5 ~ 3,0 ANMF 04115 HS 9,5 1,10 5,0 4.900 1.470
SW1 [+0/-0,5]
6,1 mm

M5 13,5 0,5 ~ 3,0 ANMF 05135 HS 10,5 1,10 7,0 8.820 1.960
SW1 [+0/-0,5]
7,1 mm

M6 15,5 0,5 ~ 3,0 ANMF 06155 HS 12,5 1,60 14,0 19.610 2.840
SW1 [+0/-0,5]
9,1 mm

M8 17,5 0,5 ~ 3,0 ANMF 08175 HS 14,5 1,60 23,0 21.570 3.720
SW1 [+0,3/-
11,1 mm 0,3]

M10 22,0 1,0 ~ 4,0 ANMF 10220 HS 16,5 2,10 35,0 34.300 3.820
SW1 [+0/-0,5]
13,1 mm

103
 BLIND RIVET BOLTS CYLINDRICAL HEAD

CYLINDRICAL HEAD blind rivet bolts

dk
MATERIAL

L2
steel

k
FINISH

L1
zinc plated

STEEL KNURLED dimensions in mm

D L1 L2 GRIP RANGE ARTICLE NUMBER dk k

min. ~ max. max.

M4 x 0,7 8,0 15,0 0,5 ~ 2,0 ADMF 04220LS 8,0 0,5

8,0 10,0 0,5 ~ 2,0 ADMF 04170LS
5,4 - 5,6 mm 9,0 15,0 2,0 ~ 3,0 ADMF 04220HS
9,0 10,0 2,0 ~ 3,0 ADMF 04170HS

M5 x 0,8 9,0 15,0 0,5 ~ 2,0 ADMF 05230LS 9,0 0,8

9,0 10,0 0,5 ~ 2,0 ADMF 05180LS
6,4 - 6,6 mm 10,5 15,0 2,0 ~ 3,5 ADMF 05230HS
10,5 10,0 2,0 ~ 3,5 ADMF 05180HS

M6 x 1,0 10,0 15,0 0,5 ~ 2,5 ADMF 06250LS 10,0 1,0

10,0 10,0 0,5 ~ 2,5 ADMF 06200LS
7,7 - 7,9 mm 11,5 15,0 2,0 ~ 4,0 ADMF 06250HS
11,5 10,0 2,0 ~ 4,0 ADMF 06200HS

M8 x 1,25 12,5 15,0 1,0 ~ 3,0 ADMF 08320LS 12,0 1,5

12,5 10,0 1,0 ~ 3,0 ADMF 08270LS
9,8 -10,0 mm 15,5 15,0 3,0 ~ 5,0 ADMF 08320HS
15,5 10,0 3,0 ~ 5,0 ADMF 08270HS

PLEASE NOTE: Special dimensions according to your drawing or with countersunk head available on
request. For more information, please contact our sales office at [email protected]

104
 CYLINDRICAL HEAD BLIND RIVET NUTS

CYLINDRICAL HEAD blind rivet nuts

dk
MATERIAL

E.P.D.M. rubber k

L
FINISH

brass

E.P.D.M. RUBBER/BRASS ROUND SHAFT/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE HARDNESS

min. ~ max. [Nm] SHORE A [+/-5]

M3 12,6 0,4 ~ 4,0 ARMF03126RR02 11,00 1,20 0,25 ~ 0,50 60

8,0 mm

M4 12,6 0,4 ~ 4,0 ARMF04126RR02 11,00 1,20 0,25 ~ 0,40 70

8,0 mm

M5 14,1 0,4 ~ 4,9 ARMF05141RR02 12,70 0,90 0,35 ~ 0,50 60

21,5 4,0 ~ 10,0 ARMF05215RR02 14,00 0,90 0,30 ~ 0,90 60
9,7 mm 26,5 7,9 ~ 15,0 ARMF05265RR02 14,00 1,30 0,30 ~ 0,70 60
39,0 20,5 ~ 30,0 ARMF05390RR02 14,00 1,30 0,60 ~ 1,00 60

M6 16,0 0,4 ~ 4,0 ARMF06160RR02 16,00 1,30 0,60 ~ 1,00 60

21,1 0,8 ~ 4,7 ARMF06211RR02 19,05 4,75 0,80 ~ 1,00 70
12,8 mm 26,7 6,4 ~ 11,5 ARMF06267RR02 16,30 2,00 0,80 ~ 1,00 70

M8 18,3 0,4 ~ 4,0 ARMF08183RR02 21,50 3,20 1,00 ~ 1,50 60

27,9 3,95 ~ 9,5 ARMF08279RR02 21,50 5,70 1,00 ~ 1,60 60
16,0 mm

M10 55,0 19,0 ~ 38,0 ARMF10550RR02 22,50 1,30 4,50 ~ 5,50 60

20,1 mm

M12 78,0 38,0 ~ 56,0 ARMF12780RR02 27,00 1,30 6,00 ~ 7,00 60

24,1 mm

PLEASE NOTE: The exact dimension can be adapted to your request. For more information,
please contact our sales office at [email protected]

105
 BLIND RIVET NUTS COUNTERSUNK HEAD

COUNTERSUNK HEAD blind rivet nuts

MATERIAL

carbon steel
FINISH

zinc plated

STEEL KNURLED BODY/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M4 11,5 1,5 ~ 3,5 ANMP 04115 FMS 9,0 1,80 6,9 10.100 3.720
[+0/-0,5]
6,0 mm

M5 13,5 1,5 ~ 4,0 ANMP 05135 FMS 10,0 1,80 10,4 11.760 4.020
[+0/-0,5]
7,0 mm

M6 16,0 1,5 ~ 4,5 ANMP 06160 FMS 12,0 1,80 21,0 20.590 5.490
[+0/-0,5]
9,0 mm

M8 19,0 1,5 ~ 4,5 ANMP 08190 FMS 14,0 1,80 30,2 27.450 7.640
[+0/-0,5]
11,0 mm

M10 21,0 1,5 ~ 4,5 ANMP 10210 FMS 16,0 1,80 33,0 32.360 8.040
[+0/-0,5]
13,0 mm

106
 COUNTERSUNK HEAD BLIND RIVET NUTS

COUNTERSUNK HEAD blind rivet nuts

MATERIAL

aluminium
alloy
AIMg 5,0
FINISH

polished

AIMg 5,0 KNURLED BODY/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M4 11,5 1,5 ~ 3,5 ANMP 04115 FMA 9,0 1,80 4,0 2.840 1.070
[+0/-0,5]
6,0 mm

M5 13,5 1,5 ~ 4,0 ANMP 05135 FMA 10,0 1,80 4,5 5.190 1.170
[+0/-0,5]
7,0 mm

M6 16,0 1,5 ~ 4,5 ANMP 06160 FMA 12,0 1,80 8,5 9.680 1.960
[+0/-0,5]
9,0 mm

M8 19,0 1,5 ~ 4,5 ANMP 08190 FMA 14,0 1,80 10,0 15.690 2.050
[+0/-0,5]
11,0 mm

M10 21,0 1,5 ~ 4,5 ANMP 10210 FMA 16,0 1,80 15,6 18.630 2.350
[+0/-0,5]
13,0 mm

107
 BLIND RIVET NUTS COUNTERSUNK HEAD

COUNTERSUNK HEAD blind rivet nuts

MATERIAL

stainless steel
A2
FINISH

polished

STAINLESS STEEL A2 KNURLED BODY/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M4 11,5 1,5 ~ 3,5 ANMP 04115 FM2 9,0 1,80 6,9 10.100 3.720
[+0/-0,5]
6,0 mm

M5 13,5 1,5 ~ 4,0 ANMP 05135 FM2 10,0 1,80 10,4 11.760 4.020
[+0/-0,5]
7,0 mm

M6 16,0 1,5 ~ 4,5 ANMP 06160 FM2 12,0 1,80 21,0 20.590 5.490
[+0/-0,5]
9,0 mm

M8 19,0 1,5 ~ 4,5 ANMP 08190 FM2 14,0 1,80 30,2 27.450 7.640
[+0/-0,5]
11,0 mm

M10 21,0 1,5 ~ 4,5 ANMP 10210 FM2 16,0 1,80 33,0 32.360 8.040
[+0/-0,5]
13,0 mm

108
 COUNTERSUNK HEAD BLIND RIVET NUTS

COUNTERSUNK HEAD blind rivet nuts

MATERIAL

carbon steel
FINISH

zinc plated

STEEL KNURLED BODY/CLOSED END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M4 17,5 1,5 ~ 3,5 ACMP 04175 FMS 9,0 1,80 4,0 7.840 2.150
[+0/-0,5]
6,0 mm

M5 20,5 1,5 ~ 4,0 ACMP 05205 FMS 10,0 1,80 5,0 10.780 2.250
[+0/-0,5]
7,0 mm

M6 23,5 1,5 ~ 4,5 ACMP 06235 FMS 12,0 1,80 10,0 16.670 3.620
[+0/-0,5]
9,0 mm

M8 28,0 1,5 ~ 4,5 ACMP 08280 FMS 14,0 1,80 18,0 30.790 4.700
[+0/-0,5]
11,0 mm

109
 BLIND RIVET NUTS REDUCED COUNTERSUNK HEAD

REDUCED COUNTERSUNK HEAD blind rivet nuts

dk
MATERIAL

k
carbon steel
L
FINISH

zinc plated
D

STEEL KNURLED BODY/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M4 10,0 0,5 ~ 3,0 ANMC 04100 FMS 7,0 0,80 4,0 6.470 1.560
[+0/-0,5]
6,0 mm

M5 11,5 0,5 ~ 3,0 ANMC 05115 FMS 8,0 0,80 5,0 9.020 2.150
[+0/-0,5]
7,0 mm

M6 14,0 0,5 ~ 3,0 ANMC 06140 FMS 10,0 0,80 10,0 16.670 2.350
[+0/-0,5]
9,0 mm

M8 15,5 0,5 ~ 3,0 ANMC 08155 FMS 12,0 0,80 18,0 21.570 2.840
[+0/-0,5]
11,0 mm

M10 19,5 0,8 ~ 3,5 ANMC 10195 FMS 14,5 0,80 30,0 31.770 4.210
[+0/-0,5]
13,0 mm

110
 REDUCED COUNTERSUNK HEAD BLIND RIVET NUTS

REDUCED COUNTERSUNK HEAD blind rivet nuts

dk
MATERIAL

k
steel
L
FINISH

zinc plated
D

STEEL ROUND SHAFT/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M3 8,5 0,5 ~ 1,5 ANMC 03085 EOP 5,4 0,55 1,5 2.690 980
[+0/-0,3]
4,8 mm

M4 9,9 0,5 ~ 2,0 ANMC 04099 EOP 6,9 0,55 5,0 6.800 1.080
[+0/-0,3]
6,4 mm

M5 11,3 0,5 ~ 3,0 ANMC 05113 EOP 7,7 0,55 8,0 8.000 1.470
[+0/-0,3]
7,2 mm

M6 14,1 0,5 ~ 3,0 ANMC 06141 EOP 10,5 0,75 12,5 11.400 1.960
[+0/-0,3]
9,6 mm

M8 15,5 0,9 ~ 3,7 ANMC 08155 EOP 11,5 0,75 16,5 15.700 2.940
[+0/-0,3]
10,6 mm

M10 18,0 1,0 ~ 3,6 ANMC 10180 EOP 15,3 0,75 34,0 18.700 3.920
[+0/-0,3]
14,2 mm

111
 BLIND RIVET NUTS REDUCED COUNTERSUNK HEAD

REDUCED COUNTERSUNK HEAD blind rivet nuts

dk
MATERIAL

aluminium k
alloy
AIMg 5,0 L
FINISH

polished
D

AIMg 5,0 KNURLED BODY/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M4 10,0 0,5 ~ 3,0 ANMC 04100 FMA 7,0 0,80 4,0 2.840 1.070
[+0/-0,5]
6,0 mm

M5 11,5 0,5 ~ 3,0 ANMC 05115 FMA 8,0 0,80 4,5 5.190 1.170
[+0/-0,5]
7,0 mm

M6 14,0 0,5 ~ 3,0 ANMC 06140 FMA 10,0 0,80 8,5 9.610 1.960
[+0/-0,5]
9,0 mm

M8 15,5 0,5 ~ 3,0 ANMC 08155 FMA 12,0 0,80 10,0 15.690 2.050
[+0/-0,5]
11,0 mm

M10 19,5 0,8 ~ 3,5 ANMC 10195 FMA 14,5 0,80 15,6 18.630 2.350
[+0/-0,5]
13,0 mm

112
 REDUCED COUNTERSUNK HEAD BLIND RIVET NUTS

REDUCED COUNTERSUNK HEAD blind rivet nuts

dk
MATERIAL

k
stainless steel
A2 L
FINISH

polished
D

STAINLESS STEEL A2 KNURLED BODY/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M4 10,0 0,5 ~ 3,0 ANMC 04100 FM2 7,0 0,80 6,9 6.860 2.940
[+0/-0,5]
6,0 mm

M5 11,5 0,5 ~ 3,0 ANMC 05115 FM2 8,0 0,80 10,4 11.760 4.020
[+0/-0,5]
7,0 mm

M6 14,0 0,5 ~ 3,0 ANMC 06140 FM2 10,0 0,80 21,2 18.630 5.190
[+0/-0,5]
9,0 mm

M8 15,5 0,5 ~ 3,0 ANMC 08155 FM2 12,0 0,80 31,0 25.490 5.390
[+0/-0,5]
11,0 mm

M10 19,5 0,8 ~ 3,5 ANMC 10195 FM2 14,5 0,80 32,0 34.320 5.880
[+0/-0,5]
13,0 mm

113
 BLIND RIVET NUTS REDUCED COUNTERSUNK HEAD

REDUCED COUNTERSUNK HEAD blind rivet nuts

dk
MATERIAL

k
stainless steel
A4 L
FINISH

polished
D

STAINLESS STEEL A4 ROUND SHAFT/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M5 11,5 0,5 ~ 3,0 ANMC 05115 FM4 8,0 0,90 10,0 11.700 4.000
[+0/-0,5]
7,0 mm

M6 14,0 0,5 ~ 3,0 ANMC 06140 FM4 10,0 0,90 21,0 20.500 5.300
[+0/-0,5]
9,0 mm

114
 REDUCED COUNTERSUNK HEAD BLIND RIVET NUTS

REDUCED COUNTERSUNK HEAD blind rivet nuts

MATERIAL

carbon steel
FINISH

zinc plated

STEEL SEMI-HEXAGON BODY/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M4 12,0 0,5 ~ 2,5 ANMC 04120 FHS 7,0 0,80 5,0 3.530 1.470
SW1 [+0/-0,5]
6,1 mm

M5 14,0 0,5 ~ 3,0 ANMC 05140 EHS 8,0 0,80 7,0 4.900 1.760
SW1 [+0/-0,5]
7,1 mm

M6 16,0 0,5 ~ 3,0 ANMC 06160 EHS 10,0 0,80 14,0 14.700 2.740
SW1 [+0/-0,5]
9,1 mm

M8 17,0 0,5 ~ 3,0 ANMC 08170 EHS 12,0 0,80 21,0 21.570 2.940
SW1 [+0/-0,5]
11,1 mm

M10 20,5 1,0 ~ 4,0 ANMC 10205 FHS 14,4 0,80 35,0 29.410 3.430
SW1 [+0/-0,5]
13,1 mm

115
 BLIND RIVET NUTS REDUCED COUNTERSUNK HEAD

REDUCED COUNTERSUNK HEAD blind rivet nuts

MATERIAL

stainless steel
A2
FINISH

polished

STAINLESS STEEL A2 SEMI-HEXAGON BODY/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M4 12,0 0,5 ~ 2,5 ANMC 04120 H2 7,0 0,90 12,3 8.230 2.940
SW1 [+0/-0,5]
6,1 mm

M5 14,0 0,5 ~ 3,0 ANMC 05140 H2 8,0 0,90 11,0 11.760 3.820
SW1 [+0/-0,5]
7,1 mm

M6 16,0 0,5 ~ 3,0 ANMC 06160 H2 10,0 0,90 21,0 21.570 3.430
SW1 [+0/-0,5]
9,1 mm

M8 17,0 0,5 ~ 3,0 ANMC 08170 H2 12,0 0,90 31,0 24.510 4.900
SW1 [+0/-0,5]
11,1 mm

M10 20,5 1,0 ~ 4,0 ANMC 10205 H2 14,4 1,10 42,0 47.070 5.000
SW1 [+0/-0,5]
13,1 mm

116
 REDUCED COUNTERSUNK HEAD BLIND RIVET NUTS

REDUCED COUNTERSUNK HEAD blind rivet nuts

MATERIAL

carbon steel
FINISH

zinc plated

STEEL FULL-HEXAGON BODY/OPEN END dimensions in mm

D L GRIP RANGE ARTICLE NUMBER dk k TORQUE TENSILE SHEAR

nom. min. ~ max. max. [Nm] [N] [N]

M4 12,0 0,5 ~ 3,0 ANMC 04120 HSF 7,0 1,00 5,0 5.880 1.860
SW1 [+0/-0,5]
6,1 mm

M5 14,0 0,5 ~ 2,5 ANMC 05140 HSF 8,2 1,00 10,3 10.590 2.350
SW1 [+0/-0,4]
7,1 mm

M6 16,0 0,5 ~ 2,5 ANMC 06160 HSF 10,2 1,00 18,0 19.610 2.940
SW1 [+0/-0,4]
9,1 mm

M8 18,0 0,5 ~ 2,5 ANMC 08180 HSF 12,0 1,00 24,8 27.450 2.940
SW1 [+0/-0,4]
11,1 mm

M10 22,0 0,5 ~ 4,0 ANMC 10220 HSF 14,0 1,00 37,0 39.220 3.430
SW1 [+0/-0,5]
13,1 mm

117
 BLIND RIVET NUTS / PIN AND COLLARS SPECIALS

SPECIALS blind rivet nuts / pin and collars

BLIND RIVET NUT M16
Blind rivet nut with cylindrical head in steel open end M16. Specially
developed for heavy duty applications. Also available in stainless steel and
closed end according to drawing of the customer.

BLIND RIVET NUT CLOSED END/WITH FIXED SEALING

Blind rivet nuts in closed end, completed with fixed sealing under the head.
Available with cylindrical, countersunk or reduced countersunk head in M3
up to M12.

BLIND RIVET NUT FULL-HEXAGON BODY/CLOSED END/ COMPLETE WITH

FIXED SEALING
Full-hexagon blind rivet nuts in steel and closed end, completed with fixed
sealing under the head. Specially developed for the automotive industry.
Available with cylindrical, countersunk or reduced countersunk head in M3
up to M12.

BLIND RIVET NUT SPLIT NUT

This type of blind rivet nut, also called “splitnut”, is provided with four
vertical “grooves” on the shaft. When pulling the nut, the grooves will split up
through which at the back of the to set material a big carrying power exists
so that a strong connection exists. The grip range has a big range through
which this type of nut can be used in universal ways. The blind rivet nut can
be used in thin sheet materials or in plastics. A combination of hard and soft
material is also possible. Available in steel in M4 up to M10.

The so called pre-bulb blind rivet nut is also provided with four vertical
“grooves”. This type of nut has a stronger wallthickness, the reason that the
grooves are slightly bow, is to set the nut easier and more controlled.
Because of this, the connection is stronger. Available in M5 up to M10.
Applications are comparable with the so called split nut.

PIN AND COLLAR STANDARD BREAKPOINT

Pin and collars in steel and stainless steel. The so called washer is pressed
by using a tool and clamps into the grooves of the pin, which breaks on the
indicated breaking point. The fastening is stronger than a traditional bolt
and will be setted vibration firmed and definitive. This product is mostly
used in the automotive and construction and building industry in which
theft is not desired.
Available in M4 up to M20 in steel and stainless steel.

PIN AND COLLAR MULTI-GRIP

This is a pin and collar which is prepared in such a way that it will break in
each desired grip range, which makes this product universal. (Multi-grip)

118
PLEASE NOTE: Above-mentioned specials can be delivered in different sizes
on request. For further information, please contact our sales office at
[email protected]
we are so happy to work with
sinolink blind rivet nuts.

119
 riveters at work

120
 INTRO FASTENING TECHNOLOGY

FASTENING TECHNOLOGY
BLIND RIVET NUT FASTENING TECHNOLOGY
what a blind rivet nut is

setting process

mechanical strengths

how to choose a correct blind rivet nut

121
 FASTENING TECHNOLOGY

BLIND RIVET NUT FASTENING TECHNOLOGY

WHAT A BLIND RIVET NUT IS functions as a nut after set.
Generally speaking, blind rivet nuts are used
to fasten the sheet material(s). As long as
A blind rivet nut is a fastener which can be
the blind rivet nut is set, it cannot be loosen
operated to fasten the work piece(s) from one
unless it is damaged, as a blind rivet. However,
side only, as the blind rivets, and meanwhile
it is not the only performance a blind rivet nut
has the technical features as a standard nut,
can do. With the thread inside undeformed,
as illustrated below:
people can fasten extra material(s) on with
a normal bolt, and can be removed when
necessary, as illustrated below:

By use of specially designed rivet nut tools,

the blind rivet nuts will be set on the pre-
drilled material(s) and fasten the work piece(s)
together, as illustrated below:
SETTING PROCESS
Setting blind rivet nuts requires specially
designed tools - rivet nut tools. There are hy-
draulic rivet nut tools powered by air pressure,
battery tools powered by Li-on battery, and
hand rivet nut tools operated manually.
Before setting a blind rivet nut, a hole or a
hexagon shaped hole must be pre-drilled or
When the blind rivet nut is being set on the pre-punched. Following the 3 steps, a blind
material, the body will deform and move to rivet nut will be set properly:
the work piece(s), forming the secondary head
at the blind side holding the material at its STEP 1
position. However, during the fastening, the To mount the blind rivet nut on the mandrel of
inside thread will not be deformed, and it a rivet nut tool, as illustrated on page 123.

122
 FASTENING TECHNOLOGY

To be sure that the mandrel screws into the

blind rivet nut to the end, and check the
MECHANICAL STRENGTHS
mandrel end. There must be at least one
The performance of a blind rivet nut mainly
thread turn of the mandrel length excess out of
requires the mechanical powers of torque,
the blind rivet nut. Then to insert into the pre-
tensile and shear.
drilled hole on the material to be fastened.

TORQUE
STEP 2
Torque value (Nm) listed in the technical
To operate the rivet nut tool and form the
details of this catalogue refers to the load up
secondary head at the blind side and the
to the failure of the set blind rivet nut.
material(s) fastened.
The failure means the jiggering (spin out) of
the set blind rivet nut.

STEP 3
To unscrew the mandrel of the tool, and the
TENSILE
tool released from the set blind rivet nut and
Tensile load value (N=Newton) listed in this
the work piece(s), as the figure on the right:
catalogue is referring to the force of the

123
 FASTENING TECHNOLOGY

mechanical breakdown of the thread of the set

blind rivet nut from pull-in-testing, illustrated
as below:

GRIP RANGE
The blind rivet nuts are designed to fasten
sheet materials, and the total thickness of the
work piece(s) together should be measured
and regarded as the grip range. To check the
SHEAR
grip range for each blind rivet nut listed in
Shearing value (N=Newton) listed in this
this catalogue with the actual grip thickness
catalogue is the force of the mechanical
measured.
breakdown of the set blind rivet nut, illustrated
as below:

BLIND RIVET NUT SIZE AND HOLE SIZE

To match your blind rivet nut size and the hole
size carefully according to the chart below.

HOW TO CHOOSE A CORRECT

BLIND RIVET NUT rivet hexagon
nut hole size hole
size hole size (SW1) tolerance
MATERIALS
According to the materials of the work piece(s) M3 5,0 mm - [+0,1 /-0]
M4 6,0 mm 6,0 mm [+0,1 /-0]
where the blind rivet nut will be set on, choose
M5 7,0 mm 7,0 mm [+0,1 /-0]
the recommended material blind rivet nut M6 8,0 mm 9,0 mm [+0,1 /-0]
according to the chart on the right in order to M8 11,0 mm 11,0 mm [+0,1 /-0]
prevent the contact corrosion between the work M10 13,0 mm 13,0 mm [+0,1 /-0]
M12 16,0 mm - [+0,1 /-0]
piece(s) and the blind rivet nut.

124
 FASTENING TECHNOLOGY

While a hexagon hole is referred, the size

should be measured as:
REDUCED COUNTERSUNK
HEAD
The reduced countersunk head is an optimised
solution for the countersunk head. In most
cases, it is not necessary to countersunk the
receiving hole.

HEAD STYLES AND SELECTION

There are 3 different head styles – cylindrical
head (flat head), countersunk head and
reduced countersunk head. Each style
performs differently in applications.

CYLINDRICAL HEAD
(FLAT HEAD)
BODY STYLES AND SELECTION

The cylindrical head is the most typical form.

The cylindrical head is on top of the metal sheet.

COUNTERSUNK HEAD The SEMI-HEXAGON body blind rivet nut pre-

After the hole is sunk with a sink drill, the
vents itself from twisting on the work piece(s).
countersunk head will be equal with the metal
With round end at the blind side, the semi-
sheet.
hexagon body prevents unscrewing after setting
with a spanner.

The FULL HEXAGON body blind rivet nut offers

optimal twisting protection, suitable for the
components on which there is no change of
risk to be accidentally unscrewed.

125
 FASTENING TECHNOLOGY

The ROUND WITH SERRATION body blind rivet Screw for closed end: Pmax. = A+B+C+L
nut is used when it is not possible to use a (L = to be measured)
hexagonal body. Investigations have shown that
the blind rivet nut body with serration offers
additional twisting protection in hard materials
compared with the round body without serra-
tion.

Viewing the blind rivet nut body end, there are

2 styles – open end and closed end:

The OPEN END blind rivet nut is used most
frequently since it offers flexible selection of
the screw length.

The CLOSED END blind rivet nut is used if liquid

must be prevented from leakage between the
screw and the blind rivet nut.

SCREW SELECTION
Screw for open end: Pmin. = A+B+C+L+P1
(P1 = at least 1 thread turn)

126
strong, quick and
handsome!

127
 They are light & easy
so even a woman can
handle them.

128
 INTRODUCTION

3 RIVETING HAND TOOLS

INTRODUCTION BLIND RIVETING HAND TOOLS
Rivet-Expert has designed a complete range of economical and stable hand
tools which offer a solution for each job.

NEW
New in our range are the NOVA tools. A unique patented power transmission
system which makes your job very easy to set (structural) blind rivets and
blind rivet nuts

129
 RIVETING HAND TOOLS PULL-LINK

PULL-LINK NOVA TOOLS PATENTED SYSTEM

PATENTED TOOL WITH UNIQUE POWER TRANSMISSION

NOVA 64R / BLIND RIVET TOOL

CAPACITY EQUIPMENT
blind rivets nosepieces blind rivets: standard
dia. 3,0/3,2 - 4,0 - 4,8/5,0 - 6,0 - 6,4 mm 1 x 3,0/3,2 mm (B), 1 x 4,0 mm (C),
up to stainless steel material 1 x 4,8/5,0 mm (D), 1x 6,0 mm (E),
ARTICLE NR 1x 6,4 mm (F)
NOVA-64R nosepieces structural rivets:
M-Link: 1 x 4,8 mm (G)
MATERIALS 1 x 6,4 mm (J)
body - nylon nosepieces structural rivets:
lever - steel P-link: 1 x 4,8 mm (D/H)
1 x 6,4 mm (F/K)
TOOL WEIGHT For detailed information see page 134.
1,64 kgs
1 bigger jaw set for 4,8/5,0 - 6,0 - 6,4
mm assembled inside the front sleeve
of the tool (art. code: 04Z20320)
1x smaller jaw set for 3,0/3,2 - 4,0 mm
stored in the plastic box
(art. code: 04Z40102)
1x spanner stored in the plastic box

PATENTED TOOL WITH UNIQUE POWER TRANSMISSION

NOVA 12N / BLIND RIVET NUT / BOLT TOOL

CAPACITY EQUIPMENT
blind rivet nuts mandrel sets
M3 - M4 - M5 - M6 - M8 - M10 - M12 1 x M3
up to stainless steel material 1 x M4
ARTICLE NR 1 x M5
NOVA-12N 1 x M6
1 x M8
MATERIALS 1 x M10
body - nylon 1 x M12
lever - steel
optional pullers for blind
TOOL WEIGHT rivet bolts M4 - M8
1,78 kgs

130
 PULL-LINK RIVETING HAND TOOLS

PULL-LINK BLIND RIVET TOOLS

FOR EASY AND LIGHT APPLICATIONS

PLR / BLIND RIVET TOOL

CAPACITY EQUIPMENT
blind rivets nosepieces
dia. 2,4 - 3,0/3,2 - 4,0 - 4,8/5,0 mm 1 x 3,0/3,2 mm - (B)
up to stainless steel material 1 x 4,0 mm - (C)
ARTICLE NR 1 x 4,8/5,0 mm - (D)
PLR optional 2,4 mm - (A)
For detailed information see page 134.
MATERIALS
body - aluminium 1 x spare set of jaws
lever - steel stored in container on the
body
TOOL WEIGHT
0,56 kgs
ARTICLE NR TOOL IN ASSORTMENT KIT PLR-K
assortment Multi-link dimensions
blind rivets: 310 x 80 x 210 mm
H2S-32080 50pcs
(LxWxH)
H2S-32120 50pcs Kit Weight
H2S-40080 40pcs 1,69 kgs
H2S-40140 30pcs
H2S-48100 25pcs
H2S-48140 25pcs

FOR EASY AND LIGHT APPLICATIONS

PLRS / BLIND RIVET TOOL WITH OPENING SPRING

CAPACITY EQUIPMENT
blind rivets nosepieces
dia. 2,4 - 3,0/3,2 - 4,0 - 4,8/5,0 mm 1 x 3,0/3,2 mm - (B)
up to stainless steel material 1 x 4,0 mm - (C)
ARTICLE NR 1 x 4,8/5,0 mm - (D)
PLRS optional 2,4 mm - (A)
For detailed information see page 134.
MATERIALS
body - aluminium 1 x spare set of jaws
lever - steel stored in container on the
body
TOOL WEIGHT
0,57 kgs
ARTICLE NR TOOL IN ASSORTMENT KIT PLRS-K
assortment Multi-link dimensions
blind rivets: 310 x 80 x 210 mm
H2S-32080 50pcs
(LxWxH)
H2S-32120 50pcs Kit Weight
H2S-40080 40pcs 1,70 kgs
H2S-40140 30pcs

131
H2S-48100 25pcs
H2S-48140 25pcs
 RIVETING HAND TOOLS PULL-LINK

PULL-LINK BLIND RIVET TOOLS

FOR EASY AND LIGHT AS WELL AS HEAVY APPLICATIONS

PL-80R / LAZY TONG BLIND RIVET TOOL

CAPACITY EQUIPMENT
blind rivets nosepieces
dia. 3,0/3,2 - 4,0 - 4,8/5,0 - 6,0 - 6,4 mm 1 x 3,0/3,2 mm - (B)
up to stainless steel material 1 x 4,0 mm - (C)
ARTICLE NR 1 x 4,8/5,0 mm - (D)
PL-80R 1 x 6,0 mm - (E)
1 x 6,4 mm - (F)
MATERIALS
body - aluminium For detailed information see page 134.
extending plates - steel

TOOL WEIGHT
2,30 kgs

132
 PULL-LINK RIVETING HAND TOOLS

PULL-LINK BLIND RIVET TOOLS

A COMFORTABLE RIVETER FOR HEAVY APPLICATIONS

PL-50R / BLIND RIVET TOOL

CAPACITY EQUIPMENT
blind rivets nosepieces
dia. 3,0/3,2 - 4,0 - 4,8/5,0 mm 1 x 3,0/3,2 mm - (B)
up to stainless steel material 1 x 4,0 mm - (C)
ARTICLE NR 1 x 4,8/5,0 mm - (D)
PL-50R
For detailed information see page 134.
MATERIALS
body - nylon 1 x spare set of jaws
lever - steel stored in mandrel collector

TOOL WEIGHT
1,04 kgs

A COMFORTABLE RIVETER FOR HEAVY APPLICATIONS

PL-64R / BLIND RIVET TOOL

CAPACITY EQUIPMENT
blind rivets nosepieces
dia. 3,0/3,2 - 4,0 - 4,8/5,0 - 6,0 - 6,4 mm 1 x 3,0/3,2 mm - (B)
up to stainless steel material 1 x 4,0 mm - (C)
ARTICLE NR 1 x 4,8/5,0 mm - (D)
PL-64R 1 x 6,0 mm - (E)
1 x 6,4 mm - (F)
MATERIALS
body - nylon For detailed information see page 134.
lever - steel
1 x spare set of jaws
TOOL WEIGHT stored in mandrel collector
1,60 kgs
ARTICLE NR TOOL IN ASSORTMENT KIT PL-64R-K
assortment Multi-link dimensions
blind rivets: 570 x 80 x 260 mm
H2S-32080 50pcs
(LxWxH)
H2S-32120 50pcs Kit Weight
H2S-40080 40pcs 3,46 kgs
H2S-40140 30pcs

133
H2S-48100 25pcs
H2S-48140 25pcs
 RIVETING HAND TOOLS PULL-LINK

NOSEPIECES FOR BLIND RIVETS

OVERVIEW NOSEPIECES FOR PULL-LINK HAND BLIND RIVET TOOLS
NOSEPIECES NOSEPIECES APPLY FOR DIAMETERS OF BLIND RIVETS
ID MARKS NORMAL RIVETS P-LINK (DH) P-LINK(CSH) M-LINK H-LINK A-LINK

A 2,4 mm
B 3,0/3,2 mm
C 4,0 mm 3,2 mm
D 4,8/5,0 mm 4,8 mm 4,0/4,8 mm
E 6,0 mm
F 6,4 mm 6,4 mm
G 4,8 mm
H 4,8 mm
J 6,4 mm
K 6,4 mm 6,4 mm

134
 PULL-LINK RIVETING HAND TOOLS

PULL-LINK BLIND RIVET NUT TOOLS

PROFESSIONAL TOOL FOR BLIND RIVET NUTS / BOLTS WITH A STROKE SETTING MECHANISM

PLN / BLIND RIVET NUT / BOLT TOOL

CAPACITY EQUIPMENT
blind rivet nuts M3 - M4 - M5 - M6 mandrels for blind rivet nuts
blind rivet bolts M4 - M5 - M6 M3 - M4 - M5 - M6
up to stainless steel material
ARTICLE NR pullers for blind rivet bolts
PLN M4 - M5 - M6

MATERIALS
body - aluminium
lever - steel

TOOL WEIGHT
0,72 kgs
ARTICLE NR TOOL IN ASSORTMENT KIT PLN-K
assortment blind rivet nuts: dimensions
steel flat head M3 30pcs 310 x 80 x 260 mm
steel flat head M4 30pcs (LxWxH)
steel flat head M5 30pcs Kit Weight
steel flat head M6 30pcs 2,47 kgs
steel csk head M4 30pcs
steel csk head M5 30pcs

A COMFORTABLE RIVETER FOR HEAVY APPLICATIONS WITH A STROKE SETTING MECHANISM

PL-6N / BLIND RIVET NUT / BOLT TOOL

CAPACITY EQUIPMENT
blind rivet nuts M3 - M4 - M5 - M6 mandrels for blind rivet nuts
blind rivet bolts M4 - M5 - M6 M3 - M4 - M5 - M6
up to stainless steel material
ARTICLE NR pullers for blind rivet bolts
PL-6N M4 - M5 - M6

MATERIALS
body - nylon
lever - steel

TOOL WEIGHT
0,77 kgs
ARTICLE NR TOOL IN ASSORTMENT KIT PL-6N-K
assortment blind rivet nuts: dimensions
steel flat head M3 30pcs 490 x 80 x 260 mm
steel flat head M4 30pcs (LxWxH)
steel flat head M5 30pcs Kit Weight
steel flat head M6 30pcs 2,91 kgs
steel csk head M4 30pcs

135
steel csk head M5 30pcs
 RIVETING HAND TOOLS PULL-LINK

PULL-LINK BLIND RIVET NUT TOOLS

A COMFORTABLE RIVETER FOR HEAVY APPLICATIONS WITH A STROKE SETTING MECHANISM

PL-6NS / BLIND RIVET NUT / BOLT TOOL WITH SPINDLE

CAPACITY EQUIPMENT
blind rivet nuts M3 - M4 - M5 - M6 mandrels for blind rivet nuts
blind rivet bolts M4 - M5 - M6 M3 - M4 - M5 - M6
up to stainless steel material
ARTICLE NR pullers for blind rivet bolts
PL-6NS M4 - M5 - M6

MATERIALS
body - nylon
lever - steel

TOOL WEIGHT
1,02 kgs
ARTICLE NR TOOL IN ASSORTMENT KIT PL-6NS-K
assortment blind rivet nuts: dimensions
steel flat head M3 30pcs 490 x 80 x 260 mm
steel flat head M4 30pcs (LxWxH)
steel flat head M5 30pcs Kit Weight
steel flat head M6 30pcs 3,16 kgs
steel csk head M4 30pcs
steel csk head M5 30pcs

A COMFORTABLE RIVETER FOR HEAVY APPLICATIONS WITH A STROKE SETTING MECHANISM

PL-10N / BLIND RIVET NUT / BOLT TOOL

CAPACITY EQUIPMENT
blind rivet nuts M5 - M6 - M8 - M10 mandrels for blind rivet nuts
blind rivet bolts M5 - M6 - M8 M5 - M6 - M8 - M10
up to stainless steel material
ARTICLE NR pullers for blind rivet bolts
PL-10N M5 - M6 - M8

MATERIALS
body - nylon
lever - steel

TOOL WEIGHT
1,29 kgs
ARTICLE NR TOOL IN ASSORTMENT KIT PL-10N-K
assortment blind rivet nuts: dimensions
steel flat head M5 30pcs 570 x 80 x 260 mm
steel flat head M6 30pcs (LxWxH)
steel flat head M8 15pcs Kit Weight
steel flat head M10 10pcs 3,90 kgs
steel csk head M6 30pcs

136
steel csk head M8 15pcs
 PULL-LINK RIVETING HAND TOOLS

PULL-LINK BLIND RIVET NUT TOOLS

A COMFORTABLE RIVETER FOR HEAVY APPLICATIONS WITH A STROKE SETTING MECHANISM

PL-10NS / BLIND RIVET NUT / BOLT TOOL WITH SPINDLE

CAPACITY EQUIPMENT
blind rivet nuts M5 - M6 - M8 - M10 mandrels for blind rivet nuts
blind rivet bolts M5 - M6 - M8 M5 - M6 - M8 - M10
up to stainless steel material
ARTICLE NR pullers for blind rivet bolts
PL-10NS M5 - M6 - M8

MATERIALS
body - nylon
lever - steel

TOOL WEIGHT
1,58 kgs
ARTICLE NR TOOL IN ASSORTMENT KIT PL-10NS-K
assortment blind rivet nuts: dimensions
steel flat head M5 30pcs 570 x 80 x 260 mm
steel flat head M6 30pcs (LxWxH)
steel flat head M8 15pcs Kit Weight
steel flat head M10 10pcs 4,19 kgs
steel csk head M6 30pcs
steel csk head M8 15pcs

A HEAVY DUTY TOOL FOR BLIND RIVET NUTS / BOLTS WITH A TRANSMISSION MECHANISM

PL-12N / BLIND RIVET NUT / BOLT TOOL WITH RATCHET SYSTEM

CAPACITY EQUIPMENT
blind rivet nuts M5 - M6 - M8 - M10 - M12 mandrels for blind rivet nuts
blind rivet bolts M5 - M6 - M8 M5 - M6 - M8 - M10 - M12
up to stainless steel material optional M4
ARTICLE NR
PL-12N pullers for blind rivet bolts
M5 - M6 - M8
MATERIALS
body - nylon
lever - steel

TOOL WEIGHT
1,00 kgs
ARTICLE NR TOOL IN ASSORTMENT KIT PL-12N-K
assortment blind rivet nuts: dimensions
steel flat head M5 30pcs 490 x 80 x 260 mm A GOOD SOLUTION FOR
steel flat head M6 30pcs (LxWxH)
HEAVY APPLICATIONS IN
steel flat head M8 15pcs Kit Weight
steel flat head M10 10pcs 2,91 kgs SMALL AREAS
steel flat head M12 5pcs

137
steel csk head M6 30pcs
 whow! so much power!

138
 INTRODUCTION

4 POWER TOOLS
INTRODUCTION TO PROFESSIONAL ELECTRICAL
AND PNEUMATIC TOOLS

BATTERY-DRIVEN TOOLS

Rivet-Expert have developed two battery-driven

blind riveting tools, which can process any type of
blind rivet with a diameter between 3.2 and 6.4
mm without restrictions. The maximum traction
power is > 18,000 N, which means there are no
restrictions on the type of blind rivet used.

Each tool comes with a complete set of nosepieces.

As power source we can deliver a powerful 4-cell
Li-ion (14.4V/1.4 Ah) or 8-cell Li-ion (14.4V/2.8
Ah) battery with which, depending on the rivet and
battery type, between 400 and 1,500 rivets can be
placed with a full battery. These tools have a unique
stroke of 27 mm, which means that the rivet is
always placed with one movement. The markets are
demanding tools that are suitable for environments
where air propulsion is not available and where
the risk of damage to air tubes and oil loss is
unacceptable (e.g. in the car industry).

Battery-driven tools are also highly attractive options for work carried out on ladders and
scaffolding, such as work on gables and roofs, making this kind of work significantly easier and
safer. Our high-quality tools have established themselves firmly on the market, in part due to
their impressive price/quality ratios.

PNEUMATIC / HYDRAULIC TOOLS

Rivet-Expert also offer a complete line of traditional pneumatic tools that can process any
type of blind rivet, but can generally only be applied on a fixed workstation.
All our blind riveting machines come with mandrel suction and are made with high-quality
parts and joints. Our pneumatic tools are also suitable for batch processing of blind rivets.
Our blind rivet nut machine is extremely light and has an ergonomic design. It can process
nuts of all types, including stainless steel, in the M3-M12 range.

139
 POWER TOOLS PULL-LINK

PULL-LINK PB SERIES BATTERY-DRIVEN TOOLS

PB50 / BATTERY-DRIVEN TOOL
CAPACITY EQUIPMENT
Blind rivets dia. 2,4 - 3,0/3,2 - nosepieces
4,0 - 4,8/5,0 mm 1x 2,4 mm – (A)
up to stainless steel material 1x 3,0/3,2 mm – (B)
ARTICLE NR 1x 4,0 mm – (C)
PB50 1x 4,8/5,0 mm – (D)
For detailed information see below.
TOOL WEIGHT
1,70 kgs (without battery) 1x 4-cell battery (14,4V/1,4Ah)
2,05 kgs (with 14,4V/1,4Ah battery) 1x charger
1x spanner
TECHNICAL INFORMATION Optional 8-cell battery (14,4V/2,8Ah)
Stroke: 20 mm BATTERY CAPACITY
Traction power: 10.000N Eg. About 400-700 pieces of
standard blind rivets (depending
BATTERIES CHARGING on the diameter of the body and
100V ~ 240VAC/50~60 Hz, different material) set with fully charged
charger plug styles available 14,4V/1,4Ah battery.

OVERVIEW NOSEPIECES FOR PULL-LINK BATTERY-DRIVEN TOOLS

NOSEPIECES NOSEPIECES APPLY FOR DIAMETERS OF BLIND RIVETS
ID MARKS NORMAL RIVETS P-LINK (DH) P-LINK(CSH) M-LINK H-LINK A-LINK

A 2,4 mm
B 3,0/3,2 mm
C 4,0 mm 3,2 mm
D 4,8/5,0 mm 4,8 mm 4,0/4,8 mm
E 6,0 mm
F 6,4 mm 6,4 mm
G 4,8 mm
H 4,8 mm
J 6,4 mm
K 6,4 mm 6,4 mm

140
 PULL-LINK POWER TOOLS

PULL-LINK PB SERIES BATTERY-DRIVEN TOOLS

PB64 / BATTERY-DRIVEN TOOL
CAPACITY EQUIPMENT
Blind rivets: standard nosepieces blind rivets: standard
dia. 4,0 - 4,8/5,0 - 6,0 - 6,4 mm 1x 4,0 mm – (C)
Structural rivets: P-link 1x 4,8/5,0 mm – (D)
dia. 4,8/5,0 - 6,4 mm 1x 6,0 mm – (E)
Structural rivets: M-Link 1x 6,4 mm – (F)
dia. 4,8/5,0 - 6,4 mm nosepieces structural rivets: P-link
up to stainless steel material 1x 4,8 mm – (D/H)
1x 6,4 mm – (F/K)
ARTICLE NR nosepieces structural rivets: M-link
PB64 1x 4,8 mm – (G)
1x 6,4 mm – (J)
TOOL WEIGHT For detailed information see page 140.
1,70 kgs (without battery)
2,05 kgs (with 14,4V/1,4Ah battery) 1x 4-cell battery (14,4V/1,4Ah)
1x charger, 1x spanner, Optional
TECHNICAL INFORMATION 8-cell battery (14,4V/2,8Ah)
Stroke: 27 mm 1 bigger jaw set for 4,8/5,0 - 6,0 - 6,4 mm assembled inside the front sleeve of the
Traction power: 18.000N tool (art. code: 04Z20320), 1x smaller jaw set for 3,0/3,2 - 4,0 mm stored in the
plastic box (art. code: 04Z40102)
BATTERIES CHARGING
100V ~ 240VAC/50~60Hz, different charger plug styles available

OPTIONS FOR PB50 AND PB64:

Options for PB50 and PB64:
- Extended and squared nosepiece holders (custom made)
- Extended nosepieces
- Special nosepieces for structural blind rivets for cladding applications
- Private label

141
 POWER TOOLS PULL-LINK

PULL-LINK AS SERIES PNEUMATIC/HYDRAULIC TOOLS

PULL-LINK AS-1 / PNEUMATIC/HYDRAULIC TOOL
CAPACITY EQUIPMENT
Blind rivets nosepieces
dia. 2,4 - 3,0/3,2 - 4,0 - 4,8/5,0 mm 1x 3,0/3,2 mm
up to stainless steel material 1x 4,0 mm
1x 4,8 mm
ARTICLE NR optional 2,4 mm
AS1

TOOL WEIGHT DIMENSIONS

1,25 kgs 272 x 264 x 99 mm
(HxLxW)
TECHNICAL INFORMATION
Stroke: 17 mm
Pressure required: 5 - 7 Bar
Traction power: (6 bar) 7,3 Kn

PULL-LINK AS-2 / PNEUMATIC/HYDRAULIC TOOL

CAPACITY EQUIPMENT
Blind rivets nosepieces
dia. 4,0 - 4,8/5,0 - 6,0 - 6,4 mm 1x 4,0 mm
up to stainless steel material 1x 4,8/5,0 mm
1x 6,0 mm
ARTICLE NR 1x 6,4 mm
AS2

TOOL WEIGHT DIMENSIONS

1,65 kgs 272 x 275 x 120 mm
(HxLxW)
TECHNICAL INFORMATION
Stroke: 21 mm
Pressure required: 5 - 7 Bar
Traction power: (6 bar) 12,5 kN

142
 PULL-LINK POWER TOOLS

PULL-LINK AS SERIES PNEUMATIC/HYDRAULIC TOOLS

PULL-LINK AS-3 / PNEUMATIC/HYDRAULIC TOOL
CAPACITY EQUIPMENT
Blind rivets and Structural rivets nosepieces
dia. 4,0 - 4,8/5,0 - 6,0 - 6,4 mm 1x 4,0 mm
up to stainless steel material 1x 4,8/5,0 mm
1x 6,0 mm
ARTICLE NR 1x 6,4 mm
AS3

TOOL WEIGHT DIMENSIONS

1,8 kgs 292 x 290 x 125 mm
(HxLxW)
TECHNICAL INFORMATION
Stroke: 25 mm
Pressure required: 5 - 7 Bar
Traction power: (6 bar) 16 kN

PULL-LINK AS-4 / PNEUMATIC/HYDRAULIC TOOL

CAPACITY EQUIPMENT
Blind rivet nuts M3 - M4 - M5 - M6 - Conversion kit blind rivet nuts
M8 - M10 - M12 1x M4
up to stainless steel material 1x M5
1x M6
ARTICLE NR 1x M8
AS4 optional M3, M10 and M12

TOOL WEIGHT DIMENSIONS

1,65 kgs 270 x 285 x 99 mm
(HxLxW)
TECHNICAL INFORMATION
Stroke: 7 mm
Pressure required: 5 - 7 Bar
Traction power: (6 bar) 18,5 kN

143
 NOTES

YOUR NOTES:

144
NOTES

145
 COLOFON

COLOFON
© Rivet-Expert – Trademarks:
Savannahweg 15, 3542 AW Utrecht
Nederland

Edition: EN-2015-00

Although we take the utmost care and

attention with regard to the accuracy of the
information in this catalogue, Rivet-Expert trademarks belong to
cannot be held responsible for any Rivet-Expert.
inaccuracies.
All other brands and trademarks are the
Changes to products and/or product property of their respective owners.
specifications may occur as a result of new
technologies and continued development. Standard quality certificates:
Our manufacturers are ISO-certified
We reserve the right to alter product according to ISO 9001:2008.
specifications without prior notification. We
recommend you contact our sales
department for the latest information via:
[email protected] © All rights reserved.

WWW.RIVET-EXPERT.COM

146